AI Code Zz

AI Code Zz — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Weak artificial intelligence

Weak artificial intelligence (weak AI) is artificial intelligence that implements a limited part of the mind, or, as narrow AI, artificial narrow intelligence (ANI), is focused on one narrow task. Weak AI is contrasted with strong AI, which can be interpreted in various ways: Artificial general intelligence (AGI): a machine with the ability to apply intelligence to any problem, rather than just one specific problem. Artificial superintelligence (ASI): a machine with a vastly superior intelligence to the average human being. Artificial consciousness: a machine that has consciousness, sentience and mind (John Searle uses "strong AI" in this sense). Narrow AI can be classified as being "limited to a single, narrowly defined task. Most modern AI systems would be classified in this category." Artificial general intelligence is conversely the opposite. == Applications and risks == Some examples of narrow AI are AlphaGo, self-driving cars, robot systems used in the medical field, and diagnostic doctors. Narrow AI systems are sometimes dangerous if unreliable. And the behavior that it follows can become inconsistent. It could be difficult for the AI to grasp complex patterns and get to a solution that works reliably in various environments. This "brittleness" can cause it to fail in unpredictable ways. Narrow AI failures can sometimes have significant consequences. It could for example cause disruptions in the electric grid, damage nuclear power plants, cause global economic problems, and misdirect autonomous vehicles. Medicines could be incorrectly sorted and distributed. Also, medical diagnoses can ultimately have serious and sometimes deadly consequences if the AI is faulty or biased. Simple AI programs have already worked their way into society, oftentimes unnoticed by the public. Autocorrection for typing, speech recognition for speech-to-text programs, and vast expansions in the data science fields are examples. Narrow AI has also been the subject of some controversy, including resulting in unfair prison sentences, discrimination against women in the workplace for hiring, resulting in death via autonomous driving, among other cases. Despite being "narrow" AI, recommender systems are efficient at predicting user reactions based on their posts, patterns, or trends. For instance, TikTok's "For You" algorithm can determine a user's interests or preferences in less than an hour. Some other social media AI systems are used to detect bots that may be involved in propaganda or other potentially malicious activities. == Weak AI versus strong AI == John Searle contests the possibility of strong AI (by which he means conscious AI). He further believes that the Turing test (created by Alan Turing and originally called the "imitation game", used to assess whether a machine can converse indistinguishably from a human) is not accurate or appropriate for testing whether an AI is "strong". Scholars such as Antonio Lieto have argued that the current research on both AI and cognitive modelling are perfectly aligned with the weak-AI hypothesis (that should not be confused with the "general" vs "narrow" AI distinction) and that the popular assumption that cognitively inspired AI systems espouse the strong AI hypothesis is ill-posed and problematic since "artificial models of brain and mind can be used to understand mental phenomena without pretending that that they are the real phenomena that they are modelling" (as, on the other hand, implied by the strong AI assumption).
Read more →
Averbis

Averbis has a focus on healthcare, pharma, automotive and intellectual property analytics. Averbis is involved in various research projects of the German Federal Ministry of Economics and Energy and the European Union such as DebugIT, EUCases, Mantra and SEMCARE. In addition to these projects, Averbis was also involved in the following projects: Greenpilot is a virtual library, which provides technical information in the fields of nutrition, environment and agriculture. Medpilot is a virtual library, which provides information about medicine and related sciences. In 2013, Averbis has been nominated for the German Founder Prize 2013. Averbis GmbH provides text analytics and text mining software to transform unstructured text into actionable information. It was founded in 2007 by IT experts after years of relevant scientific experience in the field of text mining and multilingual information retrieval. Averbis works in the field of terminology management, natural language processing, machine learning and semantic search. Its text mining software is embedded into the text mining framework UIMA.
Read more →
Vicuna LLM

Vicuna LLM is an omnibus large language model used in AI research. Its methodology is to enable the public at large to contrast and compare the accuracy of LLMs "in the wild" (an example of citizen science) and to vote on their output; a question-and-answer chat format is used. At the beginning of each round two LLM chatbots from a diverse pool of nine are presented randomly and anonymously, their identities only being revealed upon voting on their answers. The user has the option of either replaying ("regenerating") a round, or beginning an entirely fresh one with new LLMs. (The user also has the option of choosing which LLMs to do battle.) Based on Llama 2, it is an open source project, and it itself has become the subject of academic research in the burgeoning field. A non-commercial, public demo of the Vicuna-13b model is available to access using LMSYS.
Read more →
ChatGPT

ChatGPT is a generative artificial intelligence chatbot developed by OpenAI. Originally released in November 2022, the product uses large language models—specifically generative pre-trained transformers (GPTs)—to generate text, speech, and images in response to user prompts. ChatGPT accelerated the AI boom, an ongoing period marked by rapid investment and public attention toward the field of artificial intelligence (AI). OpenAI operates the service on a freemium model. Users can interact with ChatGPT through text, audio, and image prompts. ChatGPT was quickly adopted, reaching 100 million monthly active users two months after its release and 900 million weekly active users in February 2026. It has been lauded for its potential to transform numerous professional fields, and has instigated public debate about the nature of creativity and the future of knowledge work. The chatbot has also been criticized for its limitations and potential for unethical use. It can generate plausible-sounding but incorrect or nonsensical answers, known as hallucinations. Biases in its training data have been reflected in its responses. The chatbot can facilitate academic dishonesty, generate misinformation, and create malicious code. The ethics of its development, particularly the use of copyrighted content as training data, have also drawn controversy. == Features == ChatGPT is a chatbot and AI assistant built on large language model (LLM) technology. It is designed to generate human-like text and can carry out a wide variety of tasks. These include, among many others, writing and debugging computer programs, composing music, scripts, fairy tales, and essays, answering questions (sometimes at a level exceeding that of an average human test-taker), and generating business concepts. ChatGPT is frequently used for translation and summarization tasks, and can simulate interactive environments such as a Linux terminal, a multi-user chat room, or simple text-based games such as tic-tac-toe. Users interact with ChatGPT through conversations which consist of text, audio, and image inputs and outputs. The user's inputs to these conversations are referred to as prompts. An optional "Memory" feature allows users to tell ChatGPT to memorize specific information. Another option allows ChatGPT to recall old conversations. GPT-based moderation classifiers are used to reduce the risk of harmful outputs being presented to users. In March 2023, OpenAI added support for plugins for ChatGPT. This includes both plugins made by OpenAI, such as web browsing and code interpretation, and external plugins from developers such as Expedia, OpenTable, and Zapier. From October to December 2024, ChatGPT Search was deployed. It allows ChatGPT to search the web in an attempt to make more accurate and up-to-date responses. It increased OpenAI's direct competition with major search engines. OpenAI allows businesses to tailor how their content appears in the ChatGPT Search results and influence what sources are used. In December 2024, OpenAI launched a new feature allowing users to call ChatGPT with a telephone for up to 15 minutes per month for free. In September 2025, OpenAI added a feature called Pulse, which generates a daily analysis of a user's chats and connected apps such as Gmail and Google Calendar. In October 2025, OpenAI launched ChatGPT Atlas, a browser integrating the ChatGPT assistant directly into web navigation, to compete with existing browsers such as Google Chrome. It has an additional feature called "agentic mode" that allows it to take online actions for the user. === Paid tier === ChatGPT was initially free to the public and remains free in a limited capacity. In February 2023, OpenAI launched a premium service, ChatGPT Plus, that costs US$20 per month. What was offered on the paid plan versus the free tier changed as OpenAI has continued to update ChatGPT, and a Pro tier at $200/mo was introduced in December 2024. The Pro launch coincided with the release of the o1 model. In August 2025, ChatGPT Go was offered in India for ₹399 per month. The plan has higher limits than the free version. === Mobile apps === In May-July 2023, OpenAI began offering ChatGPT iOS and Android apps. ChatGPT can also power Android's assistant. An app for Windows launched on the Microsoft Store on October 15, 2024. === Languages === OpenAI met Icelandic President Guðni Th. Jóhannesson in 2022. In 2023, OpenAI worked with a team of 40 Icelandic volunteers to fine-tune ChatGPT's Icelandic conversation skills as a part of Iceland's attempts to preserve the Icelandic language. ChatGPT (based on GPT-4) was better able to translate Japanese to English when compared to Bing, Bard, and DeepL Translator in 2023. In December 2023, the Albanian government decided to use ChatGPT for the rapid translation of European Union documents and the analysis of required changes needed for Albania's accession to the EU. Several studies have shown that ChatGPT can outperform Google Translate in some mainstream translation tasks. However, as of 2024, no machine translation services match human expert performance. In August 2024, a representative of the Asia Pacific wing of OpenAI made a visit to Taiwan, during which a demonstration of ChatGPT's Chinese abilities was made. ChatGPT's Mandarin Chinese abilities were lauded, but the ability of the AI to produce content in Mandarin Chinese in a Taiwanese accent was found to be "less than ideal" due to differences between mainland Mandarin Chinese and Taiwanese Mandarin. === GPT Store === In November 2023, OpenAI released GPT Builder, a tool allowing users to customize ChatGPT's behavior for a specific use case. The customized systems are referred to as GPTs. In January 2024, OpenAI launched the GPT Store, a marketplace for GPTs. At launch, OpenAI included more than 3 million GPTs created by GPT Builder users in the GPT Store. === ChatGPT Apps === In September 2025, OpenAI added support for Model Context Protocol (MCP) to ChatGPT apps. When enabled in developer mode, this allows for improved third-party access to ChatGPT tools and servers. === Deep Research === In February 2025, OpenAI released Deep Research, a feature that generates reports based on extensive web searches. It was initially based on the reasoning model o3 and took 5 to 30 minutes per report. === Images === In October 2023, OpenAI's image generation model DALL-E 3 was integrated into ChatGPT. The integration used ChatGPT to write prompts for DALL-E guided by conversations with users. In March 2025, OpenAI updated ChatGPT to generate images using GPT Image instead of DALL-E. One of the most significant improvements was in the generation of text within images, which is especially useful for branded content. However, this ability is noticeably worse in non-Latin alphabets. The model can also generate new images based on existing ones provided in the prompt. These images are generated with C2PA metadata, which can be used to verify that they are AI-generated. OpenAI has emplaced additional safeguards to prevent what the company deems to be harmful image generation. === Agents === In 2025, OpenAI added several features to make ChatGPT more agentic (capable of autonomously performing longer tasks). In January, Operator was released. It was capable of autonomously performing tasks through web browser interactions, including filling forms, placing online orders, scheduling appointments, and other browser-based tasks. It was controlling a software environment inside a virtual machine with limited internet connectivity and with safety restrictions. It struggled with complex user interfaces. In May 2025, OpenAI introduced an agent for coding named Codex. It is capable of writing software, answering codebase questions, running tests, and proposing pull requests. It is based on a fine-tuned version of OpenAI o3. It has two versions, one running in a virtual machine in the cloud, and one where the agent runs in the cloud, but performs actions on a local machine connected via API. In July 2025, OpenAI released ChatGPT agent, an AI agent that can perform multi-step tasks. Like Operator, it controls a virtual computer. It also inherits from Deep Research's ability to gather and summarize significant volumes of information. The user can interrupt tasks or provide additional instructions as needed. In September 2025, OpenAI partnered with Stripe, Inc. to release Agentic Commerce Protocol, enabling purchases through ChatGPT. At launch, the feature was limited to purchases on Etsy from US users with a payment method linked to their OpenAI account. OpenAI takes an undisclosed cut from the merchant's payment. === ChatGPT Health === On January 7, 2026, OpenAI introduced a feature called "ChatGPT Health", whereby ChatGPT can discuss the user's health in a way that is separate from other chats. The feature is not available for users in the United Kingdom, Switzerland, or the European Economic Area, and is available on a waitli
Read more →
PhotoLine

PhotoLine is a general purpose bitmap and vector graphics editor developed and published by Computerinsel GmbH for Windows, macOS, and Linux/Wine. It was originally created in 1995 by Gerhard Huber and Martin Huber. The program combines bitmap and vector graphics editing in one seamless working application unlike most graphics software which tend to focus on either bitmap or vector editing and output. PhotoLine is considered as a market competitor to Adobe Photoshop. == Features == PhotoLine edits and composes multi-layer raster and vector images with deep support for masking and alpha compositing and with full color management. Editing and color management in PhotoLine is mostly non-destructive. Image data in layers is preserved without loss of information regardless of the document's image mode or layer transformation. color depth, image resolution, color model, and ICC profile are preserved for each individual layer or group of layers. Layers can be cloned and reused anywhere in the layer stack, including repurposed as layer masks. Layer blending and compositing in PhotoLine supports common blend modes, and features a layer blend range of -200 to +200 percent. It is also possible to control which channels are blended for each layer, adjustment layer, and layer mask or group of layers. Filters, adjustment layers, and brushes have access to Lab and HIS color modes (HIS is a variant of HSL), separately of the color model of the underlying image layer. In Addition to raster and vector editing, PhotoLine can be used for small desktop publishing projects. Multi-page documents with page spreads and text flow between text frames and pages are supported. Character and paragraph styles can be defined. Spot colors, bleed settings, a baseline grid, a table of contents generator, and PDF/X support help with these projects. PhotoLine is however much more limited when compared to dedicated publishing software such as Adobe InDesign or QuarkXPress. PhotoLine incorporates the Open-source software library LibRaw to read raw images from digital cameras for import. Developing these files is non-destructive with a choice of embedding the RAW image data either in the PhotoLine document or link to the external RAW image file. PhotoLine can open raw files as linear unmodified and non color managed source images. Photoshop PSD files can be imported and exported. Core functionality of PhotoLine can be extended through standard Photoshop filter plugins, the G'MIC digital image processing framework, and PSP tubes. External programs can be linked for a seamless round-trip workflow and files can be sent directly for processing in third-party design applications. Custom functionality is further supported through scripting and macro recording. == Early history == Developed by two brothers, Gerhard Huber and Martin Huber, PhotoLine was first released in January 1996 on the Atari ST line of personal computers from Atari Corporation. Previously, Gerhard and Martin had worked on making graphics cards for Atari computers and writing drivers for image scanners. Atari's market share was declining, and the brothers considered developing a video game to expand the business. This led them to search for image editing software that would run on Atari computers and fit their game project. Only an image editor called tms Cranach came close to what Gerhard and Martin had in mind. tms Cranach was a Raster graphics editor running on Atari's MegaST/STe, TT030, and Falcon030 systems. However, Cranach turned out to be expensive software and complicated to use. The brothers contacted tms (Cranach's developers) and this resulted in an offer from tms to purchase Cranach and its source code, as tms intended to exit the Atari software market. After the purchase of Cranach and its source code Gerhard and Martin initially continued to sell Cranach, but sales were low. In 1995 the two decided to start developing a new graphics editor called "PhotoLine". PhotoLine was developed from scratch and written in C++. It nevertheless contained a lot of know-how from Cranach (which was written in C). PhotoLine first release was launched one year later in 1996. With the growing popularity of Microsoft Windows, the release of Windows 95, and the limiting graphics hardware on the Atari platforms, the developers switched development platforms and continued development of PhotoLine for Windows only. The first Windows version (PhotoLine 2.2) was released in the middle of 1997. Shortly after, the Atari version was discontinued and saw its final release as PhotoLine 2.30. The Huber brothers released this final Atari version into the public domain in 2012. The first Classic Mac OS version of PhotoLine 6 appeared in 1999 after many ex-Atari users who had switched to Mac OS pressured the PhotoLine developers to release an Apple port. == Linux Support == PhotoLine runs natively under Windows and MacOS. While a native Linux version of PhotoLine is not available, running PhotoLine under Wine is actively supported and maintained by the developers. Running PhotoLine under Linux/Wine PhotoLine enables the user to allow Little CMS to fully support color management under Linux instead of the native OS CMS. == File format == Native PhotoLine files have the extension .PLD, which is an abbreviation of "PhotoLine Document". It can contain embedded JPEG, PNG, or camera raw images. It contains a preview image in JPEG or PNG format, which is used by the operating system or third-party applications to display a thumbnail of its contents. Thumbnails are natively supported on MacOS X. During installation on Windows the user is presented with an option to install a PLD thumbnail preview driver which enables thumbnails of PLD content in Windows Explorer. Alternatively, the FastPictureViewer Standalone Codec Pack provides the ability to display PLD thumbnails in Windows Explorer. == Version History == PhotoLine was first developed for the Atari ST computer. Version 2 was the first version for Windows, and since version 6 PhotoLine is also available for MacOS.
Read more →
Ghana Post GPS

GhanaPostGPS is a web and smartphone application, sponsored by the government of Ghana and developed by Vokacom, to provide a digital addresses and postal codes for every 5 squared meter location in Ghana. The digital address is a composite of the postcode (region, district & area code) plus a unique address. GhanaPostGPS is the first digital addressing system created by the government of Ghana. GhanaPost GPS is a mandatory requirement for obtaining the National Identification Card and other services.
Read more →
Computational photography

Computational photography refers to digital image capture and processing techniques that use digital computation instead of optical processes. Computational photography can improve the capabilities of a camera, or introduce features that were not possible at all with film-based photography, or reduce the cost or size of camera elements. Examples of computational photography include in-camera computation of digital panoramas, high-dynamic-range images, and light field cameras. Light field cameras use novel optical elements to capture three-dimensional scene information, which can then be used to produce 3D images, enhanced depth-of-field, and selective de-focusing (or "post focus"). Enhanced depth-of-field reduces the need for mechanical focusing systems. All of these features use computational imaging techniques. The definition of computational photography has evolved to cover a number of subject areas in computer graphics, computer vision, and applied optics. These areas are given below, organized according to a taxonomy proposed by Shree K. Nayar. Within each area is a list of techniques, and for each technique, one or two representative papers or books are cited. Deliberately omitted from the taxonomy are image processing (see also digital image processing) techniques applied to traditionally captured images to produce better images. Examples of such techniques are image scaling, dynamic range compression (i.e. tone mapping), color management, image completion (a.k.a. inpainting or hole filling), image compression, digital watermarking, and artistic image effects. Also omitted are techniques that produce range data, volume data, 3D models, 4D light fields, 4D, 6D, or 8D BRDFs, or other high-dimensional image-based representations. Epsilon photography is a sub-field of computational photography. == Effect on photography == Photos taken using computational photography can allow amateurs to produce photographs rivalling the quality of professional photographers, but as of 2019 do not outperform the use of professional-level equipment. == Computational illumination == This is controlling photographic illumination in a structured fashion, then processing the captured images, to create new images. The applications include image-based relighting, image enhancement, image deblurring, geometry/material recovery and so forth. High-dynamic-range imaging uses differently exposed pictures of the same scene to extend dynamic range. Other examples include processing and merging differently illuminated images of the same subject matter ("lightspace"). == Computational optics == This is a capture of optically coded images, followed by computational decoding to produce new images. Coded aperture imaging was mainly applied in astronomy and X-ray imaging to boost the image quality. Instead of a single pin-hole, a pinhole pattern is applied in imaging, and deconvolution is performed to recover the image. In coded exposure imaging, the on/off state of the shutter is coded to modify the kernel of motion blur. In this way, motion deblurring becomes a well-conditioned problem. Similarly, in a lens based coded aperture, the aperture can be modified by inserting a broadband mask. Thus, out of focus deblurring becomes a well-conditioned problem. The coded aperture can also improve the quality in light field acquisition using Hadamard transform optics. Coded aperture patterns can also be designed using color filters, in order to apply different codes at different wavelengths. This allows for increase the amount of light that reaches the camera sensor, compared to binary masks. == Computational imaging == Computational imaging is a set of imaging techniques that combine data acquisition and data processing to create the image of an object through indirect means to yield enhanced resolution, additional information such as optical phase or 3D reconstruction. The information is often recorded without using a conventional optical microscope configuration or with limited datasets. Computational imaging allows going beyond physical limitations of optical systems, such as numerical aperture, or even obliterates the need for optical elements. For parts of the optical spectrum where imaging elements such as objectives are difficult to manufacture or image sensors cannot be miniaturized, computational imaging provides useful alternatives, in fields such as X-ray and THz radiations. === Common techniques === Among common computational imaging techniques are lensless imaging, computational speckle imaging , ptychography and Fourier ptychography. Computational imaging technique often draws on compressive sensing or phase retrieval techniques, where the angular spectrum of the object is reconstructed. Other techniques are related to the field of computational imaging, such as digital holography, computer vision and inverse problems such as tomography. == Computational processing == This is the processing of non-optically-coded images to produce new images. == Computational sensors == These are detectors that combine sensing and processing, typically in hardware, like the oversampled binary image sensor. == Early work in computer vision == Although computational photography is a currently popular buzzword in computer graphics, many of its techniques first appeared in the computer vision literature, either under other names or within papers aimed at 3D shape analysis. == Art history == Computational photography, as an art form, has been practiced by capturing differently exposed pictures of the same subject matter and combining them. This was the inspiration for the development of the wearable computer in the 1970s and early 1980s. Computational photography was inspired by the work of Charles Wyckoff, and thus computational photography datasets (e.g. differently exposed pictures of the same subject matter that are taken in order to make a single composite image) are sometimes referred to as Wyckoff Sets, in his honor. Early work in this area (joint estimation of image projection and exposure value) was undertaken by Mann and Candoccia. Charles Wyckoff devoted much of his life to creating special kinds of 3-layer photographic films that captured different exposures of the same subject matter. A picture of a nuclear explosion, taken on Wyckoff's film, appeared on the cover of Life Magazine and showed the dynamic range from the dark outer areas to the inner core.
Read more →
OrCam device

OrCam devices such as OrCam MyEye are portable, artificial vision devices that allow visually impaired people to understand text and identify objects through audio feedback, describing what they are unable to see. Reuters described an important part of how it works as "a wireless smartcamera" which, when attached outside eyeglass frames, can read and verbalize text, and also supermarket barcodes. This information is converted to spoken words and entered "into the user’s ear." Face-recognition is also part of OrCam's feature set. == Devices == OrCam Technologies Ltd has created three devices; OrCam MyEye 2.0, OrCam MyEye 1, and OrCam MyReader. OrCam My Eye 2.0: OrCam debuted the second-generation model, the OrCam MyEye 2.0 in December 2017. About the size of a finger, the MyEye 2.0 is battery-powered, and has been compressed into a self-contained device. The device snaps onto any eyeglass frame magnetically. Orcam 2.0 is small and light (22.5 grams/0.8 ounces) with functionality to restore independence to the visually impaired. It comes in two versions. The basic model can read text, and a more advanced one adds features such as face recognition and barcode reading. As of July 2023, the retail cost is between $4000 and $6000 (USD). == Clinical Studies == JAMA Ophthalmology: In 2016 JAMA Ophthalmology conducted a study involving 12 legally blind participants to evaluate the usefulness of a portable artificial vision device (OrCam) for patients with low vision. The results showed that the OrCam device improved the patient's ability to perform tasks simulating those of daily living, such as reading a message on an electronic device, a newspaper article or a menu. Wills Eye: Wills Eye was a clinical study designed to measure the impact of the OrCam device on the quality of life of patients with End-stage Glaucoma. The conclusion was that OrCam, a novel artificial vision device using a mini-camera mounted on eyeglasses, allowed legally blind patients with end-stage glaucoma to read independently, subsequently improving their quality of life. == Employee testing == The New York Times described how a pre-release OrCam device was used by a Coloboma-impaired employee of the device's developer in 2013 for grocery shopping. It was the small size of the prototype rather than the functionality that gave her added mobility in an Israeli store's aisles. Added life-enhancement was described: "to both recognize and speak .. bus numbers .. traffic lights." == Social aspects == In contrast to an early version of Google Glass, which "failed ... because .. Glass wearers were ..mocked", early OrCam devices used designs that "clip unobtrusively on your shirt or perhaps your belt." In addition, it does not record sounds or images, what was called "the privacy puzzle that stumped Google. One 2018 technology reviewer wrote that he wished it had a headphone jack "so it would be less disruptive in places where others are working." An attempt was made to use bone conduction. == USA introduction == In 2018 a team headed by New York Assemblyman Dov Hikind introduced use of OrCam devices to ten individuals screened for what he termed "new Israeli technology that really makes a difference to the blind." Although not the first USA success, it was more focused than a publicly funded project that was authorized in 2016 by a California government agency. Also in 2016 the Chicago Lighthouse for the Blind demonstrated its use. == Technology == In the area of hardware, miniaturization has been quite important, but one major area, software, was mentioned by Assemblyman Hikind, and reported by The Times of Israel is the "AI-driven algorithms" that "reports .. how many people are in a room. In addition to reading printed text, it can also aid in "seeing" what is on a television or computer screen. Although OrCam can't help with handwritten information, it can reuse information, the basis of recognizing "US currency, and even faces." === Features === While early language support was for English, French, German, Hebrew and Spanish, others now available include Danish, Dutch, Finnish, Italian, Norwegian, Portuguese and Swedish. == History == OrCam Technologies Ltd was founded in 2010 by Professor Amnon Shashua and Ziv Aviram. Before co-founding OrCam, the two in 1999 co-founded Mobileye, an Israeli company that develops vision-based advanced driver-assistance systems (ADAS) providing warnings for collision prevention and mitigation, which was acquired by Intel for $15.3 billion in 2017. OrCam launched OrCam MyEye in 2013 after years of development and testing, and began selling it commercially in 2015. In its early years, the company raised $22 million, $6 million of which came from Intel Capital. By 2014, Intel, which was also investing in Google Glass, had invested $15 million in Orcam. In March 2017, OrCam had raised $41 million in capital, making it worth $600 million. === Marketing === One outcome of initial marketing in the USA was that they "reached a deal with the California Department of Rehabilitation, ...qualifying blind and visually impaired state residents." == OrCam Technologies Ltd == OrCam Technologies Ltd. is the Israeli-based company producing these OrCam devices, which are wearable artificial intelligence space. The company develops and manufactures assistive technology devices for individuals who are visually impaired, partially sighted, blind, print disabilities, or have other disabilities. OrCam headquarters is located in Jerusalem, operating under the company name OrCam Technologies Ltd. OrCam has over 150 employees, is headquartered in Jerusalem, and has offices in New York, Toronto, and London. == Awards == 2018 Last Gadget Standing Winner 2018 CES Innovation Awards Honoree in Accessible Tech 2017 NAIDEX Innovation Award 2016 Louise Braille Corporate Recognition Award 2016 Silmo-d-Or Award
Read more →
Auto-defrost

Auto-defrost, automatic defrost or self-defrosting is a technique which regularly defrosts the evaporator in a refrigerator or freezer. Appliances using this technique are often called frost free, frostless, or no-frost. == Mechanism == The defrost mechanism in a refrigerator heats the cooling element (evaporator coil) for a short period of time and melts the frost that has formed on it. The resulting water drains through a duct at the back of the unit. Defrosting is controlled by an electric or electronic timer. For every 6, 8, 10, 12 or 24 hours of compressor operation, it turns on a defrost heater for 15 minutes to half an hour. The defrost heater, having a typical power rating of 350W to 600W, is often mounted just below the evaporator in top and bottom-freezer models. It can also be located below and in the middle of the evaporator in side-by-side models. It may be protected from short circuits by means of fusible links. In older refrigerators, the timer runs continuously. In newer designs, the timer only runs while the compressor runs, so the longer the refrigerator door is closed, the less time the heater will run for and the more energy is saved. A defrost thermostat opens the heater circuit when the evaporator temperature rises above a preset temperature, 40°F (5°C) or more, thereby preventing excessive heating of the freezer compartment. The defrost timer is such that either the compressor or the defrost heater is on, but not both at the same time. Inside the freezer, air is circulated by means of one or more fans. In a typical design cold air from the freezer compartment is ducted to the fresh food compartment and circulated back into the freezer compartment. Air circulation helps sublimate any ice or frost that may form on frozen items in the freezer compartment. While defrosting, this fan is stopped to prevent heated-up air from reaching the food compartment. Instead of the normal cooling elements being embedded in the freezer liner, auto-defrost elements are behind or beneath the liner. This allows them to be heated for short periods of time to dispose of frost, without heating the contents of the freezer. Alternatively, some systems use the hot gas in the condenser to defrost the evaporator. This is done by means of a circuit that is cross-linked by a three-way valve. The hot gas quickly heats up the evaporator and defrosts it. This system is primarily used in commercial applications such as ice-cream displays. == Application == While this technique was originally applied to the refrigerator compartment, it was later used for freezer compartment as well. A combined refrigerator/freezer which applies self-defrosting to the refrigerator compartment only is usually called "partial frost free" or semi-automatic defrost (some brands call these "Auto Defrost" while Frigidaire referred to their semi-automatic models as "Cycla-Matic," Kelvinator often named these models as "Cyclic Defrost" ). These refrigerators usually have a pan underneath where water from the melted frost in the refrigerator section evaporates. Freezers with automatic defrosting and combined refrigerator/freezer units which also apply self defrosting to their freezer compartment are called "frost free". The latter usually feature an air connection between the two compartments with the air passage to the refrigerator compartment regulated by a damper. By this means, a controlled portion of the air coming from the freezer reaches the refrigerator. Some older models have no air circulation between their freezer and refrigerator sections. Instead, they use an independent cooling system (for example: an evaporator coil with a defrost heater and a circulating fan in the freezer and a cold-plate or open-coil evaporator in the refrigerator. "Frost-Free" refrigerator/freezer units usually use a heating element to defrost their evaporators, a pan to collect and evaporate water from the frost that melts from the cold plate and/or evaporator coil, a timer which turns off the compressor and turns on the defrost element usually from once to 4 times a day for periods usually ranging from 15 to 30 minutes, a defrost limiter thermostat that turns off the heating element before the temperature rises too much while the timer is still in its defrost phase. Some models also feature a drain heater to prevent ice from blocking the drain. Other early types of refrigerators also use hot gas defrost instead of electric heaters. These reverse the evaporator and condenser sides for the defrost cycle. Some newer refrigerator/freezer models have a computer that monitors how many times each door is opened and uses this data to control defrost scheduling thereby reducing power use. == Advantages == No need to manually defrost the frost buildup, therefore power consumption will not increase with time. Food packaging is easier to see. Most frozen food will not stick together. Smells are limited, especially in total frost-free appliances because the air always circulates. Better temperature management. == Disadvantages == The system can be more expensive to run when usage is high and if the fan continues or starts to run when the door is opened. A thermal cutout safety device is required to prevent overheating of the heating element. Increased electrical and mechanical complexity compared to a basic upright freezer or chest freezer, making it more prone to component failure. The temperature of the freezer contents rises during the defrosting cycles, especially if there is a light load in the freezer. This can cause "freezer burn" on articles placed in the freezer, from partially defrosting, then re-freezing On hot, humid days condensation will sometimes form around the refrigerator doors. Defrosting may not be completed by the time the defrost timer cycles back to normal operation (especially in hot, humid conditions with frequent door openings), leaving ice/frost on the evaporator coils. This condition can lead to "icing" which will interfere with the operation of the refrigerator. In laboratories, self-defrosting freezers must not be used to store certain delicate reagents such as enzymes, because the temperature cycling can degrade them. In addition, water can evaporate out of containers that do not have a very tight seal, altering the concentration of the reagents. Self-defrosting freezers should never be used to store flammable chemicals.
Read more →
International Conference on Language Resources and Evaluation

The International Conference on Language Resources and Evaluation is an international conference organised by the ELRA Language Resources Association every other year (on even years) with the support of institutions and organisations involved in Natural language processing. The series of LREC conferences was launched in Granada in 1998. == History of conferences == The survey of the LREC conferences over the period 1998-2013 was presented during the 2014 conference in Reykjavik as a closing session. It appears that the number of papers and signatures is increasing over time. The average number of authors per paper is higher as well. The percentage of new authors is between 68% and 78%. The distribution between male (65%) and female (35%) authors is stable over time. The most frequent technical term is "annotation", then comes "part-of-speech". == The LRE Map == The LRE Map was introduced at LREC 2010 and is now a regular feature of the LREC submission process for both the conference papers and the workshop papers. At the submission stage, the authors are asked to provide some basic information about all the resources (in a broad sense, i.e. including tools, standards and evaluation packages), either used or created, described in their papers. All these descriptors are then gathered in a global matrix called the LRE Map. This feature has been extended to several other conferences.
Read more →
Rule-based machine translation

Rule-based machine translation (RBMT) is a classical approach of machine translation systems based on linguistic information about source and target languages. Such information is retrieved from (unilingual, bilingual or multilingual) dictionaries and grammars covering the main semantic, morphological, and syntactic regularities of each language. Having input sentences, an RBMT system generates output sentences on the basis of analysis of both the source and the target languages involved. RBMT has been progressively superseded by more efficient methods, particularly neural machine translation. == History == The first RBMT systems were developed in the early 1970s. The most important steps of this evolution were the emergence of the following RBMT systems: Systran Japanese MT systems Today, other common RBMT systems include: Apertium GramTrans == Types of RBMT == There are three different types of rule-based machine translation systems: Direct Systems (Dictionary Based Machine Translation) map input to output with basic rules. Transfer RBMT Systems (Transfer Based Machine Translation) employ morphological and syntactical analysis. Interlingual RBMT Systems (Interlingua) use an abstract meaning. RBMT systems can also be characterized as the systems opposite to Example-based Systems of Machine Translation (Example Based Machine Translation), whereas Hybrid Machine Translations Systems make use of many principles derived from RBMT. == Basic principles == The main approach of RBMT systems is based on linking the structure of the given input sentence with the structure of the demanded output sentence, necessarily preserving their unique meaning. The following example can illustrate the general frame of RBMT: A girl eats an apple. Source Language = English; Demanded Target Language = German Minimally, to get a German translation of this English sentence one needs: A dictionary that will map each English word to an appropriate German word. Rules representing regular English sentence structure. Rules representing regular German sentence structure. And finally, we need rules according to which one can relate these two structures together. Accordingly, we can state the following stages of translation: 1st: getting basic part-of-speech information of each source word: a = indef.article; girl = noun; eats = verb; an = indef.article; apple = noun 2nd: getting syntactic information about the verb "to eat": NP-eat-NP; here: eat – Present Simple, 3rd Person Singular, Active Voice 3rd: parsing the source sentence: (NP an apple) = the object of eat Often only partial parsing is sufficient to get to the syntactic structure of the source sentence and to map it onto the structure of the target sentence. 4th: translate English words into German a (category = indef.article) => ein (category = indef.article) girl (category = noun) => Mädchen (category = noun) eat (category = verb) => essen (category = verb) an (category = indef. article) => ein (category = indef.article) apple (category = noun) => Apfel (category = noun) 5th: Mapping dictionary entries into appropriate inflected forms (final generation): A girl eats an apple. => Ein Mädchen isst einen Apfel. == Ontologies == An ontology is a formal representation of knowledge that includes the concepts (such as objects, processes etc.) in a domain and some relations between them. If the stored information is of linguistic nature, one can speak of a lexicon. In NLP, ontologies can be used as a source of knowledge for machine translation systems. With access to a large knowledge base, rule-based systems can be enabled to resolve many (especially lexical) ambiguities on their own. In the following classic examples, as humans, we are able to interpret the prepositional phrase according to the context because we use our world knowledge, stored in our lexicons:I saw a man/star/molecule with a microscope/telescope/binoculars.Since the syntax does not change, a traditional rule-based machine translation system may not be able to differentiate between the meanings. With a large enough ontology as a source of knowledge however, the possible interpretations of ambiguous words in a specific context can be reduced. === Building ontologies === The ontology generated for the PANGLOSS knowledge-based machine translation system in 1993 may serve as an example of how an ontology for NLP purposes can be compiled: A large-scale ontology is necessary to help parsing in the active modules of the machine translation system. In the PANGLOSS example, about 50,000 nodes were intended to be subsumed under the smaller, manually-built upper (abstract) region of the ontology. Because of its size, it had to be created automatically. The goal was to merge the two resources LDOCE online and WordNet to combine the benefits of both: concise definitions from Longman, and semantic relations allowing for semi-automatic taxonomization to the ontology from WordNet. A definition match algorithm was created to automatically merge the correct meanings of ambiguous words between the two online resources, based on the words that the definitions of those meanings have in common in LDOCE and WordNet. Using a similarity matrix, the algorithm delivered matches between meanings including a confidence factor. This algorithm alone, however, did not match all meanings correctly on its own. A second hierarchy match algorithm was therefore created which uses the taxonomic hierarchies found in WordNet (deep hierarchies) and partially in LDOCE (flat hierarchies). This works by first matching unambiguous meanings, then limiting the search space to only the respective ancestors and descendants of those matched meanings. Thus, the algorithm matched locally unambiguous meanings (for instance, while the word seal as such is ambiguous, there is only one meaning of seal in the animal subhierarchy). Both algorithms complemented each other and helped constructing a large-scale ontology for the machine translation system. The WordNet hierarchies, coupled with the matching definitions of LDOCE, were subordinated to the ontology's upper region. As a result, the PANGLOSS MT system was able to make use of this knowledge base, mainly in its generation element. == Components == The RBMT system contains: a SL morphological analyser - analyses a source language word and provides the morphological information; a SL parser - is a syntax analyser which analyses source language sentences; a translator - used to translate a source language word into the target language; a TL morphological generator - works as a generator of appropriate target language words for the given grammatica information; a TL parser - works as a composer of suitable target language sentences; Several dictionaries - more specifically a minimum of three dictionaries: a SL dictionary - needed by the source language morphological analyser for morphological analysis, a bilingual dictionary - used by the translator to translate source language words into target language words, a TL dictionary - needed by the target language morphological generator to generate target language words. The RBMT system makes use of the following: a Source Grammar for the input language which builds syntactic constructions from input sentences; a Source Lexicon which captures all of the allowable vocabulary in the domain; Source Mapping Rules which indicate how syntactic heads and grammatical functions in the source language are mapped onto domain concepts and semantic roles in the interlingua; a Domain Model/Ontology which defines the classes of domain concepts and restricts the fillers of semantic roles for each class; Target Mapping Rules which indicate how domain concepts and semantic roles in the interlingua are mapped onto syntactic heads and grammatical functions in the target language; a Target Lexicon which contains appropriate target lexemes for each domain concept; a Target Grammar for the target language which realizes target syntactic constructions as linearized output sentences. == Advantages == No bilingual texts are required. This makes it possible to create translation systems for languages that have no texts in common, or even no digitized data whatsoever. Domain independent. Rules are usually written in a domain independent manner, so the vast majority of rules will "just work" in every domain, and only a few specific cases per domain may need rules written for them. No quality ceiling. Every error can be corrected with a targeted rule, even if the trigger case is extremely rare. This is in contrast to statistical systems where infrequent forms will be washed away by default. Total control. Because all rules are hand-written, you can easily debug a rule-based system to see exactly where a given error enters the system, and why. Reusability. Because RBMT systems are generally built from a strong source language analysis that is fed to a transfer step and target language generator, the source language analysis and targe
Read more →
Semantic decomposition (natural language processing)

A semantic decomposition is an algorithm that breaks down the meanings of phrases or concepts into less complex concepts. The result of a semantic decomposition is a representation of meaning. This representation can be used for tasks, such as those related to artificial intelligence or machine learning. Semantic decomposition is common in natural language processing applications. The basic idea of a semantic decomposition is taken from the learning skills of adult humans, where words are explained using other words. It is based on Meaning-text theory. Meaning-text theory is used as a theoretical linguistic framework to describe the meaning of concepts with other concepts. == Background == Given that an AI does not inherently have language, it is unable to think about the meanings behind the words of a language. An artificial notion of meaning needs to be created for a strong AI to emerge. Creating an artificial representation of meaning requires the analysis of what meaning is. Many terms are associated with meaning, including semantics, pragmatics, knowledge and understanding or word sense. Each term describes a particular aspect of meaning, and contributes to a multitude of theories explaining what meaning is. These theories need to be analyzed further to develop an artificial notion of meaning best fit for our current state of knowledge. == Graph representations == Representing meaning as a graph is one of the two ways that both an AI cognition and a linguistic researcher think about meaning (connectionist view). Logicians utilize a formal representation of meaning to build upon the idea of symbolic representation, whereas description logics describe languages and the meaning of symbols. This contention between 'neat' and 'scruffy' techniques has been discussed since the 1970s. Research has so far identified semantic measures and with that word-sense disambiguation (WSD) - the differentiation of meaning of words - as the main problem of language understanding. As an AI-complete environment, WSD is a core problem of natural language understanding. AI approaches that use knowledge-given reasoning creates a notion of meaning combining the state of the art knowledge of natural meaning with the symbolic and connectionist formalization of meaning for AI. The abstract approach is shown in Figure. First, a connectionist knowledge representation is created as a semantic network consisting of concepts and their relations to serve as the basis for the representation of meaning. This graph is built out of different knowledge sources like WordNet, Wiktionary, and BabelNET. The graph is created by lexical decomposition that recursively breaks each concept semantically down into a set of semantic primes. The primes are taken from the theory of Natural Semantic Metalanguage, which has been analyzed for usefulness in formal languages. Upon this graph marker passing is used to create the dynamic part of meaning representing thoughts. The marker passing algorithm, where symbolic information is passed along relations form one concept to another, uses node and edge interpretation to guide its markers. The node and edge interpretation model is the symbolic influence of certain concepts. Future work uses the created representation of meaning to build heuristics and evaluate them through capability matching and agent planning, chatbots or other applications of natural language understanding.
Read more →
TiDB

TiDB (; "Ti" stands for Titanium) is an open-source NewSQL database that supports Hybrid Transactional and Analytical Processing (HTAP) workloads. Designed to be MySQL compatible, it is developed and supported primarily by PingCAP and licensed under Apache 2.0. It is also available as a paid product. TiDB drew its initial design inspiration from Google's Spanner and F1 papers. == Release history == See all TiDB release notes. On December 19, 2024, TiDB 8.5 GA was released. On May 24, 2024, TiDB 8.1 GA was released. On December 1, 2023, TiDB 7.5 GA was released. On May 31, 2023, TiDB 7.1 GA was released. On April 7, 2022, TiDB 6.0 GA was released. On April 7, 2021 TiDB 5.0 GA was released. On May 28, 2020, TiDB 4.0 GA was released. On June 28, 2019, TiDB 3.0 GA was released. On April 27, 2018, TiDB 2.0 GA was released. On October 16, 2017, TiDB 1.0 GA was released. == Main features == === Horizontal scalability === TiDB can expand both SQL processing and storage capacity by adding new nodes. === MySQL compatibility === TiDB acts like it is a MySQL 8.0 server to applications. A user can continue to use all of the existing MySQL client libraries. Because TiDB's SQL processing layer is built from scratch, it is not a MySQL fork. === Distributed transactions with strong consistency === TiDB internally shards a table into small range-based chunks that are referred to as "Regions". Each Region defaults to approximately 100 MB in size, and TiDB uses a two-phase commit internally to ensure that regions are maintained in a transactionally consistent way. === Cloud native === TiDB is designed to work in the cloud. The storage layer of TiDB, called TiKV, became a Cloud Native Computing Foundation (CNCF) member project in August 2018, as a Sandbox level project, and became an incubation-level hosted project in May 2019. TiKV graduated from CNCF in September 2020. === Real-time HTAP === TiDB can support both online transaction processing (OLTP) and online analytical processing (OLAP) workloads. TiDB has two storage engines: TiKV, a rowstore, and TiFlash, a columnstore. === High availability === TiDB uses the Raft consensus algorithm to ensure that data is available and replicated throughout storage in Raft groups. In the event of failure, a Raft group will automatically elect a new leader for the failed member, and self-heal the TiDB cluster. === Vector Search === TiDB has a vector data type and vector indexes. This allows TiDB to be used as Vector database in AI Retrieval-augmented generation applications. == Deployment methods == === Kubernetes with Operator === TiDB can be deployed in a Kubernetes-enabled cloud environment by using TiDB Operator. An Operator is a method of packaging, deploying, and managing a Kubernetes application. It is designed for running stateful workloads and was first introduced by CoreOS in 2016. TiDB Operator was originally developed by PingCAP and open-sourced in August, 2018. TiDB Operator can be used to deploy TiDB on a laptop, Google Cloud Platform’s Google Kubernetes Engine, and Amazon Web Services’ Elastic Container Service for Kubernetes. === TiUP === TiDB 4.0 introduces TiUP, a cluster operation and maintenance tool. It helps users quickly install and configure a TiDB cluster with a few commands. == Tools == TiDB has a series of open-source tools built around it to help with data replication and migration for existing MySQL and MariaDB users. === TiDB Data Migration (DM) === TiDB Data Migration (DM) is suited for replicating data from already sharded MySQL or MariaDB tables to TiDB. A common use case of DM is to connect MySQL or MariaDB tables to TiDB, treating TiDB almost as a slave, then directly run analytical workloads on this TiDB cluster in near real-time. === Backup & Restore === Backup & Restore (BR) is a distributed backup and restore tool for TiDB cluster data. === Dumpling === Dumpling is a data export tool that exports data stored in TiDB or MySQL. It lets users make logical full backups or full dumps from TiDB or MySQL. === TiDB Lightning === TiDB Lightning is a tool that supports high speed full-import of a large MySQL dump into a new TiDB cluster. This tool is used to populate an initially empty TiDB cluster with much data, in order to speed up testing or production migration. The import speed improvement is achieved by parsing SQL statements into key-value pairs, then directly generate Sorted String Table (SST) files to RocksDB. === TiCDC === TiCDC is a change data capture tool which streams data from TiDB to other systems like Apache Kafka.
Read more →
Eigenface

An eigenface ( EYE-gən-) is the name given to a set of eigenvectors when used in the computer vision problem of human face recognition. The approach of using eigenfaces for recognition was developed by Sirovich and Kirby and used by Matthew Turk and Alex Pentland in face classification. The eigenvectors are derived from the covariance matrix of the probability distribution over the high-dimensional vector space of face images. The eigenfaces themselves form a basis set of all images used to construct the covariance matrix. This produces dimension reduction by allowing the smaller set of basis images to represent the original training images. Classification can be achieved by comparing how faces are represented by the basis set. == History == The eigenface approach began with a search for a low-dimensional representation of face images. Sirovich and Kirby showed that principal component analysis could be used on a collection of face images to form a set of basis features. These basis images, known as eigenpictures, could be linearly combined to reconstruct images in the original training set. If the training set consists of M images, principal component analysis could form a basis set of N images, where N < M. The reconstruction error is reduced by increasing the number of eigenpictures; however, the number needed is always chosen less than M. For example, if you need to generate a number of N eigenfaces for a training set of M face images, you can say that each face image can be made up of "proportions" of all the K "features" or eigenfaces: Face image1 = (23% of E1) + (2% of E2) + (51% of E3) + ... + (1% En). In 1991 M. Turk and A. Pentland expanded these results and presented the eigenface method of face recognition. In addition to designing a system for automated face recognition using eigenfaces, they showed a way of calculating the eigenvectors of a covariance matrix such that computers of the time could perform eigen-decomposition on a large number of face images. Face images usually occupy a high-dimensional space and conventional principal component analysis was intractable on such data sets. Turk and Pentland's paper demonstrated ways to extract the eigenvectors based on matrices sized by the number of images rather than the number of pixels. Once established, the eigenface method was expanded to include methods of preprocessing to improve accuracy. Multiple manifold approaches were also used to build sets of eigenfaces for different subjects and different features, such as the eyes. == Generation == A set of eigenfaces can be generated by performing a mathematical process called principal component analysis (PCA) on a large set of images depicting different human faces. Informally, eigenfaces can be considered a set of "standardized face ingredients", derived from statistical analysis of many pictures of faces. Any human face can be considered to be a combination of these standard faces. For example, one's face might be composed of the average face plus 10% from eigenface 1, 55% from eigenface 2, and even −3% from eigenface 3. Remarkably, it does not take many eigenfaces combined together to achieve a fair approximation of most faces. Also, because a person's face is not recorded by a digital photograph, but instead as just a list of values (one value for each eigenface in the database used), much less space is taken for each person's face. The eigenfaces that are created will appear as light and dark areas that are arranged in a specific pattern. This pattern is how different features of a face are singled out to be evaluated and scored. There will be a pattern to evaluate symmetry, whether there is any style of facial hair, where the hairline is, or an evaluation of the size of the nose or mouth. Other eigenfaces have patterns that are less simple to identify, and the image of the eigenface may look very little like a face. The technique used in creating eigenfaces and using them for recognition is also used outside of face recognition: handwriting recognition, lip reading, voice recognition, sign language/hand gestures interpretation and medical imaging analysis. Therefore, some do not use the term eigenface, but prefer to use 'eigenimage'. === Practical implementation === To create a set of eigenfaces, one must: Prepare a training set of face images. The pictures constituting the training set should have been taken under the same lighting conditions, and must be normalized to have the eyes and mouths aligned across all images. They must also be all resampled to a common pixel resolution (r × c). Each image is treated as one vector, simply by concatenating the rows of pixels in the original image, resulting in a single column with r × c elements. For this implementation, it is assumed that all images of the training set are stored in a single matrix T, where each column of the matrix is an image. Subtract the mean. The average image a has to be calculated and then subtracted from each original image in T. Calculate the eigenvectors and eigenvalues of the covariance matrix S. Each eigenvector has the same dimensionality (number of components) as the original images, and thus can itself be seen as an image. The eigenvectors of this covariance matrix are therefore called eigenfaces. They are the directions in which the images differ from the mean image. Usually this will be a computationally expensive step (if at all possible), but the practical applicability of eigenfaces stems from the possibility to compute the eigenvectors of S efficiently, without ever computing S explicitly, as detailed below. Choose the principal components. Sort the eigenvalues in descending order and arrange eigenvectors accordingly. The number of principal components k is determined arbitrarily by setting a threshold ε on the total variance. Total variance ⁠ v = ( λ 1 + λ 2 + . . . + λ n ) {\displaystyle v=(\lambda _{1}+\lambda _{2}+...+\lambda _{n})} ⁠, n = number of components, and λ {\displaystyle \lambda } represents component eigenvalue. k is the smallest number that satisfies ( λ 1 + λ 2 + . . . + λ k ) v > ϵ {\displaystyle {\frac {(\lambda _{1}+\lambda _{2}+...+\lambda _{k})}{v}}>\epsilon } These eigenfaces can now be used to represent both existing and new faces: we can project a new (mean-subtracted) image on the eigenfaces and thereby record how that new face differs from the mean face. The eigenvalues associated with each eigenface represent how much the images in the training set vary from the mean image in that direction. Information is lost by projecting the image on a subset of the eigenvectors, but losses are minimized by keeping those eigenfaces with the largest eigenvalues. For instance, working with a 100 × 100 image will produce 10,000 eigenvectors. In practical applications, most faces can typically be identified using a projection on between 100 and 150 eigenfaces, so that most of the 10,000 eigenvectors can be discarded. === Matlab example code === Here is an example of calculating eigenfaces with Extended Yale Face Database B. To evade computational and storage bottleneck, the face images are sampled down by a factor 4×4=16. Note that although the covariance matrix S generates many eigenfaces, only a fraction of those are needed to represent the majority of the faces. For example, to represent 95% of the total variation of all face images, only the first 43 eigenfaces are needed. To calculate this result, implement the following code: === Computing the eigenvectors === Performing PCA directly on the covariance matrix of the images is often computationally infeasible. If small images are used, say 100 × 100 pixels, each image is a point in a 10,000-dimensional space and the covariance matrix S is a matrix of 10,000 × 10,000 = 108 elements. However the rank of the covariance matrix is limited by the number of training examples: if there are N training examples, there will be at most N − 1 eigenvectors with non-zero eigenvalues. If the number of training examples is smaller than the dimensionality of the images, the principal components can be computed more easily as follows. Let T be the matrix of preprocessed training examples, where each column contains one mean-subtracted image. The covariance matrix can then be computed as S = TTT and the eigenvector decomposition of S is given by S v i = T T T v i = λ i v i {\displaystyle \mathbf {Sv} _{i}=\mathbf {T} \mathbf {T} ^{T}\mathbf {v} _{i}=\lambda _{i}\mathbf {v} _{i}} However TTT is a large matrix, and if instead we take the eigenvalue decomposition of T T T u i = λ i u i {\displaystyle \mathbf {T} ^{T}\mathbf {T} \mathbf {u} _{i}=\lambda _{i}\mathbf {u} _{i}} then we notice that by pre-multiplying both sides of the equation with T, we obtain T T T T u i = λ i T u i {\displaystyle \mathbf {T} \mathbf {T} ^{T}\mathbf {T} \mathbf {u} _{i}=\lambda _{i}\mathbf {T} \mathbf {u} _{i}} Meaning that, if ui is an eigenvector of TTT, then vi = Tui is an eigenvector of S. If we have
Read more →
Backend as a service

Backend as a service (BaaS), sometimes also referred to as mobile backend as a service (MBaaS), is a service for providing web app and mobile app developers with a way to easily build a backend to their frontend applications. Features available include user management, push notifications, and integration with social networking services. These services are provided via the use of custom software development kits (SDKs) and application programming interfaces (APIs). BaaS is a relatively recent development in cloud computing, with most BaaS startups dating from 2011 or later. Some of the most popular service providers are AWS Amplify and Firebase. == Purpose == Web and mobile apps require a similar set of features on the backend, including notification service, integration with social networks, and cloud storage. Each of these services has its own API that must be individually incorporated into an app, a process that can be time-consuming and complicated for app developers. BaaS providers form a bridge between the frontend of an application and various cloud-based backends via a unified API and SDK. Providing a consistent way to manage backend data means that developers do not need to redevelop their own backend for each of the services that their apps need to access, potentially saving both time and money. Although similar to other cloud-computing business models, such as serverless computing, software as a service (SaaS), infrastructure as a service (IaaS), and platform as a service (PaaS), BaaS is distinct from these other services in that it specifically addresses the cloud-computing needs of web and mobile app developers by providing a unified means of connecting their apps to cloud services. == Features == BaaS providers offer different set of features and backend tools. Some of the most common features include: Database management. Most BaaS solutions provide SQL and/or NoSQL database management services for applications. Developers can store their app data without deploying and managing databases themselves. BaaS usually provides client SDKs, REST and GraphQL APIs for the frontend to interact with databases. File storage. BaaS providers often offer storage solutions for media files, user uploads, and other binary data. Applications can upload, download, and delete files through provided SDKs and APIs. Authentication and authorization. Some BaaS offer authentication and authorization services that allow developers to easily manage app users. This includes user sign-up, login, password reset, social media login integration through OAuth, user group and permission management etc. Notification service. Some BaaS providers such as Firebase and AWS Amplify have notification services that can send custom emails to users and push native notifications on mobile platforms. This is especially useful for applications that need to send messages, alerts, and reminders. Cloud functions. Some BaaS allow developers to deploy and run serverless functions. The functions are usually stateless and can be triggered by various ways including HTTP requests, SDK invocation, background server events, and cloud scheduled executions. Different providers offer runtime support for different languages, some of the popular languages are JavaScript/TypeScript (Node.js, Deno), Python, Java/Kotlin. Cloud functions extend the potential and flexibility of BaaS by allowing developers to write custom functionalities for their apps, working in a way similar to a traditional REST API backend framework. Usage analytics. Analytics data about application usage is often included in BaaS. This allows developers to monitor user behaviors and make decisions correspondingly in marketing strategies and performance optimizations. UI design. Some BaaS providers, such as AWS Amplify and Backendless, offer user interface designing tools that help developers design the frontend UI of web and mobile apps. While this may be useful for small teams and individual developers, UI design assistance may not be conventional in BaaS as it goes beyond the scope of backend infrastructure. Real-Time. Real-time features in a BaaS platform ensure that data updates and synchronizations occur instantly across all clients, making changes immediately visible to users. This is crucial for applications like live chat and collaborative tools, using technologies like WebSockets to maintain continuous server-client connections. == Service providers == BaaS providers have a broad focus, providing SDKs and APIs that work for app development on multiple platforms with different technology stacks, such as JavaScript (for Web apps), Flutter, Java/Kotlin (for Android apps), Swift/Objective-C (for iOS/MacOS/WatchOS/TvOS apps), .NET (for Windows) and others. BaaS providers also come in different types, suiting developers of different needs. === Cloud-based BaaS === Most BaaS providers host backend platforms on their cloud servers. They also manage the infrastructure, security, and scalability of the platforms. Developers can access the backend services via a web interface or the provided APIs. Some examples of cloud-based BaaS include Firebase (hosted on Google Cloud Platform), AWS Amplify (hosted on Amazon Web Services), and Microsoft Azure Mobile Apps (hosted on Microsoft Azure). === Self-hosted BaaS === Self-hosted BaaS allow developers to host backend on their own servers, providing more flexibility and potential to customization compared to cloud-based BaaS, which often is more difficult to migrate from. However, developers are also in charge of managing the infrastructure, security, and scalability of their servers. === Mobile BaaS === Mobile backend as a service (MBaaS) is a type of BaaS specifically for applications deployed in mobile systems. While some references use MBaaS interchangeably for BaaS, BaaS can have a wider variety of support such as for web apps and desktop apps. == Business model == BaaS providers generate revenue from their services in various ways, often using a freemium model. Under this model, a client receives a certain number of free active users or API calls per month, and pays a fee for each user or call over this limit. Alternatively, clients can pay a set fee for a package which allows for a greater number of calls or active users per month. There are also flat fee plans that make the pricing more predictable. Some of the providers offer the unlimited API calls inside their free plan offerings. Another business model that has been used by a lot of BaaS providers is PAYG (pay as you go), which has a flexible cost based on developers' usage of database, storage, bandwidth, function calls, user numbers etc.
Read more →