AI Coding Kiro

AI Coding Kiro — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

N-jet

An N-jet is the set of (partial) derivatives of a function f ( x ) {\displaystyle f(x)} up to order N. Specifically, in the area of computer vision, the N-jet is usually computed from a scale space representation L {\displaystyle L} of the input image f ( x , y ) {\displaystyle f(x,y)} , and the partial derivatives of L {\displaystyle L} are used as a basis for expressing various types of visual modules. For example, algorithms for tasks such as feature detection, feature classification, stereo matching, tracking and object recognition can be expressed in terms of N-jets computed at one or several scales in scale space.
Read more →
Knuth–Plass line-breaking algorithm

The Knuth–Plass algorithm is a line-breaking algorithm designed for use in Donald Knuth's typesetting program TeX. It integrates the problems of text justification and hyphenation into a single algorithm by using a discrete dynamic programming method to minimize a loss function that attempts to quantify the aesthetic qualities desired in the finished output. The algorithm works by dividing the text into a stream of three kinds of objects: boxes, which are non-resizable chunks of content, glue, which are flexible, resizeable elements, and penalties, which represent places where breaking is undesirable (or, if negative, desirable). The loss function, known as "badness", is defined in terms of the deformation of the glue elements, and any extra penalties incurred through line breaking. Making hyphenation decisions follows naturally from the algorithm, but the choice of possible hyphenation points within words, and optionally their preference weighting, must be performed first, and that information inserted into the text stream in advance. Knuth and Plass' original algorithm does not include page breaking, but may be modified to interface with a pagination algorithm, such as the algorithm designed by Plass in his PhD thesis. Typically, the cost function for this technique should be modified so that it does not count the space left on the final line of a paragraph; this modification allows a paragraph to end in the middle of a line without penalty. The same technique can also be extended to take into account other factors such as the number of lines or costs for hyphenating long words. == Computational complexity == A naive brute-force exhaustive search for the minimum badness by trying every possible combination of breakpoints would take an impractical O ( 2 n ) {\displaystyle O(2^{n})} time. The classic Knuth-Plass dynamic programming approach to solving the minimization problem is a worst-case O ( n 2 ) {\displaystyle O(n^{2})} algorithm but usually runs much faster, in close to linear time. Solving for the Knuth-Plass optimum can be shown to be a special case of the convex least-weight subsequence problem, which can be solved in O ( n ) {\displaystyle O(n)} time. Methods to do this include the SMAWK algorithm. == Simple example of minimum raggedness metric == For the input text AAA BB CC DDDDD with line width 6, a greedy algorithm that puts as many words on a line as possible while preserving order before moving to the next line, would produce: ------ Line width: 6 AAA BB Remaining space: 0 CC Remaining space: 4 DDDDD Remaining space: 1 The sum of squared space left over by this method is 0 2 + 4 2 + 1 2 = 17 {\displaystyle 0^{2}+4^{2}+1^{2}=17} . However, the optimal solution achieves the smaller sum 3 2 + 1 2 + 1 2 = 11 {\displaystyle 3^{2}+1^{2}+1^{2}=11} : ------ Line width: 6 AAA Remaining space: 3 BB CC Remaining space: 1 DDDDD Remaining space: 1 The difference here is that the first line is broken before BB instead of after it, yielding a better right margin and a lower cost 11.
Read more →
Reference data

Reference data is data used to classify or categorize other data. Typically, they are static or slowly changing over time. Examples of reference data include: Units of measurement Country codes Corporate codes Fixed conversion rates e.g., weight, temperature, and length Calendar structure and constraints Reference data sets are sometimes alternatively referred to as a "controlled vocabulary" or "lookup" data. Reference data differs from master data. While both provide context for business transactions, reference data is concerned with classification and categorisation, while master data is concerned with business entities. A further difference between reference data and master data is that a change to the reference data values may require an associated change in business process to support the change, while a change in master data will always be managed as part of existing business processes. For example, adding a new customer or sales product is part of the standard business process. However, adding a new product classification (e.g. "restricted sales item") or a new customer type (e.g. "gold level customer") will result in a modification to the business processes to manage those items. == Externally-defined reference data == For most organisations, most or all reference data is defined and managed within that organisation. Some reference data, however, may be externally defined and managed, for example by standards organizations. An example of externally defined reference data is the set of country codes as defined in ISO 3166-1. == Reference data management == Curating and managing reference data is key to ensuring its quality and thus fitness for purpose. All aspects of an organisation, operational and analytical, are greatly dependent on the quality of an organization's reference data. Without consistency across business process or applications, for example, similar things may be described in quite different ways. Reference data gain in value when they are widely re-used and widely referenced. Examples of good practice in reference data management include: Formalize the reference data management Use external reference data as much as possible Govern the reference data specific to your enterprise Manage reference data at enterprise level Version control your reference data
Read more →
MaPS S.A.

MaPS S.A. is a software editor founded in 2011 by Thierry Muller. The company is headquartered in Luxembourg. Its platform, called MaPS System, provides Data Management software for Multichannel Marketing. == History and funding == The first version of MaPS System was released under the agency Prem1um S.A. in 2005 in the partnership with Pingroom agency. In combination with MaPS System, Prem1um also provided various consulting services in Marketing, Publishing and Sales. This is where MaPS System takes its names (M stands for Marketing, P for Publishing and S for Sales). In 2011, after being successful, Prem1um S.A. decided to enable the software MaPS System to operate independently under MaPS S.A., as a separate company and editor of the software. The first financial supports were provided by Malta ICI, a Venture Capital firm, and the local partner Chameleon Invest, a seed-capital fund led by Business Angels, who invested €900,000. In a second investment round in 2014 led by Newion Investments, a Venture Capital firm, €1.4 Million were raised, thus amounting to total assets of €2.2 Million. In 2016, the company was taken over by three private investors. In 2018, after two years of continuous growth and European expansion in Belgium, Germany and Switzerland, MaPS S.A acquired Awevo, an e-commerce web agency. == Products == The services included in MaPS System range from the data centralization, Data Governance to an optimized Multichannel Marketing. The software currently includes more than 35 modules for Master Data Management, Product Information Management, Digital Asset Management, Business Process Management including catalogue Publishing features. == Certifications == In 2019, MaPS System and Awevo received "Made in Luxembourg" label, given to the companies whose services are entirely designed in Luxembourg, without any production or development offshoring. MaPS System is a member of ICT Cluster by Luxinnovation.
Read more →
Stability (learning theory)

Stability, also known as algorithmic stability, is a notion in computational learning theory of how a machine learning algorithm output is changed with small perturbations to its inputs. A stable learning algorithm is one for which the prediction does not change much when the training data is modified slightly. For instance, consider a machine learning algorithm that is being trained to recognize handwritten letters of the alphabet, using 1000 examples of handwritten letters and their labels ("A" to "Z") as a training set. One way to modify this training set is to leave out an example, so that only 999 examples of handwritten letters and their labels are available. A stable learning algorithm would produce a similar classifier with both the 1000-element and 999-element training sets. Stability can be studied for many types of learning problems, from language learning to inverse problems in physics and engineering, as it is a property of the learning process rather than the type of information being learned. The study of stability gained importance in computational learning theory in the 2000s when it was shown to have a connection with generalization. It was shown that for large classes of learning algorithms, notably empirical risk minimization algorithms, certain types of stability ensure good generalization. == History == A central goal in designing a machine learning system is to guarantee that the learning algorithm will generalize, or perform accurately on new examples after being trained on a finite number of them. In the 1990s, milestones were reached in obtaining generalization bounds for supervised learning algorithms. The technique historically used to prove generalization was to show that an algorithm was consistent, using the uniform convergence properties of empirical quantities to their means. This technique was used to obtain generalization bounds for the large class of empirical risk minimization (ERM) algorithms. An ERM algorithm is one that selects a solution from a hypothesis space H {\displaystyle H} in such a way to minimize the empirical error on a training set S {\displaystyle S} . A general result, proved by Vladimir Vapnik for an ERM binary classification algorithms, is that for any target function and input distribution, any hypothesis space H {\displaystyle H} with VC-dimension d {\displaystyle d} , and n {\displaystyle n} training examples, the algorithm is consistent and will produce a training error that is at most O ( d n ) {\displaystyle O\left({\sqrt {\frac {d}{n}}}\right)} (plus logarithmic factors) from the true error. The result was later extended to almost-ERM algorithms with function classes that do not have unique minimizers. Vapnik's work, using what became known as VC theory, established a relationship between generalization of a learning algorithm and properties of the hypothesis space H {\displaystyle H} of functions being learned. However, these results could not be applied to algorithms with hypothesis spaces of unbounded VC-dimension. Put another way, these results could not be applied when the information being learned had a complexity that was too large to measure. Some of the simplest machine learning algorithms—for instance, for regression—have hypothesis spaces with unbounded VC-dimension. Another example is language learning algorithms that can produce sentences of arbitrary length. Stability analysis was developed in the 2000s for computational learning theory and is an alternative method for obtaining generalization bounds. The stability of an algorithm is a property of the learning process, rather than a direct property of the hypothesis space H {\displaystyle H} , and it can be assessed in algorithms that have hypothesis spaces with unbounded or undefined VC-dimension such as nearest neighbor. A stable learning algorithm is one for which the learned function does not change much when the training set is slightly modified, for instance by leaving out an example. A measure of Leave one out error is used in a Cross Validation Leave One Out (CVloo) algorithm to evaluate a learning algorithm's stability with respect to the loss function. As such, stability analysis is the application of sensitivity analysis to machine learning. == Summary of classic results == Early 1900s - Stability in learning theory was earliest described in terms of continuity of the learning map L {\displaystyle L} , traced to Andrey Nikolayevich Tikhonov. 1979 - Devroye and Wagner observed that the leave-one-out behavior of an algorithm is related to its sensitivity to small changes in the sample. 1999 - Kearns and Ron discovered a connection between finite VC-dimension and stability. 2002 - In a landmark paper, Bousquet and Elisseeff proposed the notion of uniform hypothesis stability of a learning algorithm and showed that it implies low generalization error. Uniform hypothesis stability, however, is a strong condition that does not apply to large classes of algorithms, including ERM algorithms with a hypothesis space of only two functions. 2002 - Kutin and Niyogi extended Bousquet and Elisseeff's results by providing generalization bounds for several weaker forms of stability which they called almost-everywhere stability. Furthermore, they took an initial step in establishing the relationship between stability and consistency in ERM algorithms in the Probably Approximately Correct (PAC) setting. 2004 - Poggio et al. proved a general relationship between stability and ERM consistency. They proposed a statistical form of leave-one-out-stability which they called CVEEEloo stability, and showed that it is a) sufficient for generalization in bounded loss classes, and b) necessary and sufficient for consistency (and thus generalization) of ERM algorithms for certain loss functions such as the square loss, the absolute value and the binary classification loss. 2010 - Shalev Shwartz et al. noticed problems with the original results of Vapnik due to the complex relations between hypothesis space and loss class. They discuss stability notions that capture different loss classes and different types of learning, supervised and unsupervised. 2016 - Moritz Hardt et al. proved stability of gradient descent given certain assumption on the hypothesis and number of times each instance is used to update the model. == Preliminary definitions == We define several terms related to learning algorithms training sets, so that we can then define stability in multiple ways and present theorems from the field. A machine learning algorithm, also known as a learning map L {\displaystyle L} , maps a training data set, which is a set of labeled examples ( x , y ) {\displaystyle (x,y)} , onto a function f {\displaystyle f} from X {\displaystyle X} to Y {\displaystyle Y} , where X {\displaystyle X} and Y {\displaystyle Y} are in the same space of the training examples. The functions f {\displaystyle f} are selected from a hypothesis space of functions called H {\displaystyle H} . The training set from which an algorithm learns is defined as S = { z 1 = ( x 1 , y 1 ) , . . , z m = ( x m , y m ) } {\displaystyle S=\{z_{1}=(x_{1},\ y_{1})\ ,..,\ z_{m}=(x_{m},\ y_{m})\}} and is of size m {\displaystyle m} in Z = X × Y {\displaystyle Z=X\times Y} drawn i.i.d. from an unknown distribution D. Thus, the learning map L {\displaystyle L} is defined as a mapping from Z m {\displaystyle Z_{m}} into H {\displaystyle H} , mapping a training set S {\displaystyle S} onto a function f S {\displaystyle f_{S}} from X {\displaystyle X} to Y {\displaystyle Y} . Here, we consider only deterministic algorithms where L {\displaystyle L} is symmetric with respect to S {\displaystyle S} , i.e. it does not depend on the order of the elements in the training set. Furthermore, we assume that all functions are measurable and all sets are countable. The loss V {\displaystyle V} of a hypothesis f {\displaystyle f} with respect to an example z = ( x , y ) {\displaystyle z=(x,y)} is then defined as V ( f , z ) = V ( f ( x ) , y ) {\displaystyle V(f,z)=V(f(x),y)} . The empirical error of f {\displaystyle f} is I S [ f ] = 1 n ∑ V ( f , z i ) {\displaystyle I_{S}[f]={\frac {1}{n}}\sum V(f,z_{i})} . The true error of f {\displaystyle f} is I [ f ] = E z V ( f , z ) {\displaystyle I[f]=\mathbb {E} _{z}V(f,z)} Given a training set S of size m, we will build, for all i = 1....,m, modified training sets as follows: By removing the i-th element S | i = { z 1 , . . . , z i − 1 , z i + 1 , . . . , z m } {\displaystyle S^{|i}=\{z_{1},...,\ z_{i-1},\ z_{i+1},...,\ z_{m}\}} By replacing the i-th element S i = { z 1 , . . . , z i − 1 , z i ′ , z i + 1 , . . . , z m } {\displaystyle S^{i}=\{z_{1},...,\ z_{i-1},\ z_{i}',\ z_{i+1},...,\ z_{m}\}} == Definitions of stability == === Hypothesis Stability === An algorithm L {\displaystyle L} has hypothesis stability β with respect to the loss function V if the following holds: ∀ i ∈ { 1 , . . . , m } , E S , z [ | V ( f S , z ) − V ( f S |
Read more →
Automatic image annotation

Automatic image annotation (also known as automatic image tagging or linguistic indexing) is the process by which a computer system automatically assigns metadata in the form of captioning or keywords to a digital image. This application of computer vision techniques is used in image retrieval systems to organize and locate images of interest from a database. This method can be regarded as a type of multi-class image classification with a very large number of classes - as large as the vocabulary size. Typically, image analysis in the form of extracted feature vectors and the training annotation words are used by machine learning techniques to attempt to automatically apply annotations to new images. The first methods learned the correlations between image features and training annotations. Subsequently, techniques were developed using machine translation to attempt to translate the textual vocabulary into the 'visual vocabulary,' represented by clustered regions known as blobs. Subsequent work has included classification approaches, relevance models, and other related methods. The advantages of automatic image annotation versus content-based image retrieval (CBIR) are that queries can be more naturally specified by the user. At present, Content-Based Image Retrieval (CBIR) generally requires users to search by image concepts such as color and texture or by finding example queries. However, certain image features in example images may override the concept that the user is truly focusing on. Traditional methods of image retrieval, such as those used by libraries, have relied on manually annotated images, which is expensive and time-consuming, especially given the large and constantly growing image databases in existence.
Read more →
Shapiro–Senapathy algorithm

The Shapiro—Senapathy algorithm (S&S) is a computational method for identifying splice sites in eukaryotic genes. The algorithm employs a Position Weight Matrix (PWM) scoring formula to predict donor and acceptor splice sites in any given gene. This methodology has been used to discover splice sites and disease-causing splice site mutations in the human genome, and has become a standard tool in clinical genomics. The S&S algorithm has been cited in thousands of clinical studies, according to Google Scholar. It has also formed the basis of widely used software, including Human Splicing Finder, SROOGLE, and Alamut, which identify splice sites and splice site mutations that cause disease. The algorithm has uncovered splicing mutations in diseases ranging from cancers to inherited disorders, and predicted the deleterious effects of these mutations including exon skipping, intron retention, and cryptic splice site activation. == The algorithm == A splice site defines the boundary between a coding exon and a non-coding intron in eukaryotic genes. The S&S algorithm employs a sliding window, corresponding to the length of the splice site motif, to scan a gene sequence and detect potential splice sites. For each sliding window, the algorithm calculates a score by comparing the nucleotide sequence to a Position Weight Matrix (PWM) derived from known splice sites. This formula generates a percentile score, indicating the likelihood that a given sequence functions as a donor or acceptor splice site. The majority of disease-causing mutations in the human genome are located in splice sites. Clinical genomics studies analyze the splice site scores generated by the S&S algorithm to predict the consequences of splice site mutations including exon skipping and intron retention. The algorithm's sensitivity to single-nucleotide changes allows it to determine mutations that may impact RNA splicing and contribute to disease. In addition to identifying real splice sites, the S&S algorithm has been used to discover cryptic splice sites — alternative splice sites activated by mutations — which may disrupt normal splicing. The algorithm detects mutations that lead to the activation of cryptic splice sites, which may be located proximal to real splice sites or deep within non-coding introns. It has thus been used to determine the causes of numerous diseases that are due to cryptic splicing. == Cancer gene discovery using S&S == The S&S algorithm has been used to identify splice-site mutations in genes associated with several cancers. For example, genes causing commonly occurring cancers including breast cancer, ovarian cancer, colorectal cancer, leukemia, head and neck cancers, prostate cancer, retinoblastoma, squamous cell carcinoma, gastrointestinal cancer, melanoma, liver cancer, Lynch syndrome, skin cancer, and neurofibromatosis have been found. In addition, splicing mutations in genes causing less commonly known cancers including gastric cancer, gangliogliomas, Li-Fraumeni syndrome, Loeys–Dietz syndrome, Osteochondromas (bone tumor), Nevoid basal cell carcinoma syndrome, and Pheochromocytomas have been identified. Specific mutations in different splice sites in various genes causing breast cancer (e.g., BRCA1, PALB2), ovarian cancer (e.g., SLC9A3R1, COL7A1, HSD17B7), colon cancer (e.g., APC, MLH1, DPYD), colorectal cancer (e.g., COL3A1, APC, HLA-A), skin cancer (e.g., COL17A1, XPA, POLH), and Fanconi anemia (e.g., FANC, FANA) have been uncovered. The mutations in the donor and acceptor splice sites in different genes causing a variety of cancers that have been identified by S&S are shown in Table 1. == Discovery of genes causing inherited disorders using S&S == Specific mutations in different splice sites in various genes that cause inherited disorders, including, for example, Type 1 diabetes (e.g., PTPN22, TCF1 (HCF-1A)), hypertension (e.g., LDL, LDLR, LPL), Marfan syndrome (e.g., FBN1, TGFBR2, FBN2), cardiac diseases (e.g., COL1A2, MYBPC3, ACTC1), eye disorders (e.g., EVC, VSX1) have been uncovered. A few example mutations in the donor and acceptor splice sites in different genes causing a variety of inherited disorders identified using S&S are shown in Table 2. == Genes causing immune system disorders == More than 100 immune system disorders affect humans, including inflammatory bowel diseases, multiple sclerosis, systemic lupus erythematosus, bloom syndrome, familial cold autoinflammatory syndrome, and dyskeratosis congenita. The Shapiro–Senapathy algorithm has been used to discover genes and mutations involved in many immune disorder diseases, including Ataxia telangiectasia, B-cell defects, epidermolysis bullosa, and X-linked agammaglobulinemia. Xeroderma pigmentosum, an autosomal recessive disorder is caused by faulty proteins formed due to new preferred splice donor site identified using S&S algorithm and resulted in defective nucleotide excision repair. Type I Bartter syndrome (BS) is caused by mutations in the gene SLC12A1. S&S algorithm helped in disclosing the presence of two novel heterozygous mutations c.724 + 4A > G in intron 5 and c.2095delG in intron 16 leading to complete exon 5 skipping. Mutations in the MYH gene, which is responsible for removing the oxidatively damaged DNA lesion are cancer-susceptible in the individuals. The IVS1+5C plays a causative role in the activation of a cryptic splice donor site and the alternative splicing in intron 1, S&S algorithm shows, guanine (G) at the position of IVS+5 is well conserved (at the frequency of 84%) among primates. This also supported the fact that the G/C SNP in the conserved splice junction of the MYH gene causes the alternative splicing of intron 1 of the β type transcript. Splice site scores were calculated according to S&S to find EBV infection in X-linked lymphoproliferative disease. Identification of Familial tumoral calcinosis (FTC) is an autosomal recessive disorder characterized by ectopic calcifications and elevated serum phosphate levels and it is because of aberrant splicing. == Application of S&S in hospitals for clinical practice and research == The Shapiro–Senapathy (S&S) algorithm has played a significant role in advancing the diagnosis and treatment of human diseases through its application in modern clinical genomics. With the widespread adoption of next-generation sequencing (NGS) technologies, the S&S algorithm is now routinely integrated into clinical practice by geneticists and diagnostic laboratories. It is implemented in various computational tools such as Human Splicing Finder (HSF), Splice Site Finder (SSF), and Alamut Visual, which assist in interpreting the functional impact of genetic variants on RNA splicing. The algorithm is particularly useful in identifying pathogenic splice site mutations in cases where the clinical presentation is unclear or where conventional diagnostic methods have failed to identify a causative gene. Its utility has been demonstrated across diverse patient cohorts, including individuals from different ethnic backgrounds with various cancers and inherited genetic disorders. The following are selected examples illustrating its application in clinical research. === Cancers === === Inherited disorders === == S&S - Algorithm for identifying splice sites, exons and split genes == The Shapiro–Senapathy algorithm (SSA) was developed to identify splice sites in uncharacterized genomic sequences, with early applications in the Human Genome Project. The method introduced a Position Weight Matrix (PWM)-based approach to analyze splicing sequences across eukaryotic organisms, marking the first computational framework to systematically define splice sites using probabilistic scoring. Key innovations of the algorithm included: Exon Detection – Exons were defined as sequences bounded by acceptor and donor splice sites with S&S scores above a threshold, requiring an open reading frame (ORF) for validation. Gene Prediction – The method enabled the identification of complete genes by assembling predicted exons, forming a basis for later gene-finding tools. Mutation Analysis – The algorithm distinguishes deleterious splice-site mutations (which disrupt protein function by lowering S&S scores) from neutral variations. This capability allowed researchers to study disease-linked cryptic splice sites in humans, animals, and plants. SSA's PWM-based framework influenced subsequent computational methods, including machine learning and neural network approaches, for splice-site prediction and alternative splicing research. It remains a foundational tool in genomics and disease studies. == Discovering the mechanisms of aberrant splicing in diseases == The Shapiro–Senapathy algorithm has been used to determine the various aberrant splicing mechanisms in genes due to deleterious mutations in the splice sites, which cause numerous diseases. Deleterious splice site mutations impair the normal splicing of the gene transcripts, and thereby make the encoded protei
Read more →
Archival bond

The archival bond is a concept in archival theory referring to the relationship that each archival record has with the other records produced as part of the same transaction or activity and located within the same grouping. These bonds are a core component of each individual record and are necessary for transforming a document into a record, as a document will only acquire meaning (and become a record) through its interrelationships with other records. == Description == The concept of the archival bond is primarily associated with the work of Luciana Duranti along with Heather MacNeil, as part of research into the integrity of electronic records. Duranti resumed and extended the concept of vincolo archivistico (archival bond), first expressed in 1937 by archivist Giorgio Cencetti of the Italian archival school. This bond emerges from the fact that electronic records are not physically arranged like traditional records. For traditional, analog records, their bond is implicit in their arrangement. But for electronic records, this bond must be made explicit due to the lack of a single sequential order of records in a digital environment. The archival bond was one of the core concepts of the subsequent International Research on Permanent Authentic Records in Electronic Systems (InterPARES) project and can be found in the InterPARES glossary. As Duranti notes, the archival bond is not to be confused with the broader term "context" as context exists independently of a record, while "the archival bond is an essential part of the record, which would not exist without it."
Read more →
Distribution management system

A distribution management system (DMS) is a collection of applications designed to monitor and control the electric power distribution networks efficiently and reliably. It acts as a decision support system to assist the control room and field operating personnel with the monitoring and control of the electric distribution system. Improving the reliability and quality of service in terms of reducing power outages, minimizing outage time, maintaining acceptable frequency and voltage levels are the key deliverables of a DMS. Given the complexity of distribution grids, such systems may involve communication and coordination across multiple components. For example, the control of active loads may require a complex chain of communication through different components as described in US patent 11747849B2 In recent years, utilization of electrical energy increased exponentially and customer requirement and quality definitions of power were changed enormously. As electric energy became an essential part of daily life, its optimal usage and reliability became important. Real-time network view and dynamic decisions have become instrumental for optimizing resources and managing demands, leading to the need for distribution management systems in large-scale electrical networks. == Overview == Most distribution utilities have been comprehensively using IT solutions through their Outage Management System (OMS) that makes use of other systems like Customer Information System (CIS), Geographical Information System (GIS) and Interactive Voice Response System (IVRS). An outage management system has a network component/connectivity model of the distribution system. By combining the locations of outage calls from customers with knowledge of the locations of the protection devices (such as circuit breakers) on the network, a rule engine is used to predict the locations of outages. Based on this, restoration activities are charted out and the crew is dispatched for the same. In parallel with this, distribution utilities began to roll out Supervisory Control and Data Acquisition (SCADA) systems, initially only at their higher voltage substations. Over time, use of SCADA has progressively extended downwards to sites at lower voltage levels. DMSs access real-time data and provide all information on a single console at the control centre in an integrated manner. Their development varied across different geographic territories. In the US, for example, DMSs typically grew by taking Outage Management Systems to the next level, automating the complete sequences and providing an end to end, integrated view of the entire distribution spectrum. In the UK, by contrast, the much denser and more meshed network topologies, combined with stronger Health & Safety regulation, had led to early centralisation of high-voltage switching operations, initially using paper records and schematic diagrams printed onto large wallboards which were 'dressed' with magnetic symbols to show the current running states. There, DMSs grew initially from SCADA systems as these were expanded to allow these centralised control and safety management procedures to be managed electronically. These DMSs required even more detailed component/connectivity models and schematics than those needed by early OMSs as every possible isolation and earthing point on the networks had to be included. In territories such as the UK, therefore, the network component/connectivity models were usually developed in the DMS first, whereas in the USA these were generally built in the GIS. The typical data flow in a DMS has the SCADA system, the Information Storage & Retrieval (ISR) system, Communication (COM) Servers, Front-End Processors (FEPs) & Field Remote Terminal Units (FRTUs). == Why DMS? == Reduce the duration of outages Improve the speed and accuracy of outage predictions. Reduce crew patrol and drive times through improved outage locating. Improve the operational efficiency Determine the crew resources necessary to achieve restoration objectives. Effectively utilize resources between operating regions. Determine when best to schedule mutual aid crews. Increased customer satisfaction A DMS incorporates IVR and other mobile technologies, through which there is an improved outage communications for customer calls. Provide customers with more accurate estimated restoration times. Improve service reliability by tracking all customers affected by an outage, determining electrical configurations of every device on every feeder, and compiling details about each restoration process. == DMS Functions == In order to support proper decision making and O&M activities, DMS solutions should support the following functions: Network visualization & support tools Applications for Analytical & Remedial Action Utility Planning Tools System Protection Schemes The various sub functions of the same, carried out by the DMS are listed below:- === Network Connectivity Analysis (NCA) === Distribution network usually covers over a large area and catering power to different customers at different voltage levels. So locating required sources and loads on a larger GIS/Operator interface is often very difficult. Panning & zooming provided with normal SCADA system GUI does not cover the exact operational requirement. Network connectivity analysis is an operator specific functionality which helps the operator to identify or locate the preferred network or component very easily. NCA does the required analyses and provides display of the feed point of various network loads. Based on the status of all the switching devices such as circuit breaker (CB), Ring Main Unit (RMU) and/or isolators that affect the topology of the network modeled, the prevailing network topology is determined. The NCA further assists the operator to know operating state of the distribution network indicating radial mode, loops and parallels in the network. === Switching Schedule & Safety Management === In territories such as the UK a core function of a DMS has always been to support safe switching and work on the networks. Control engineers prepare switching schedules to isolate and make safe a section of network before work is carried out, and the DMS validates these schedules using its network model. Switching schedules can combine telecontrolled and manual (on-site) switching operations. When the required section has been made safe, the DMS allows a Permit To Work (PTW) document to be issued. After its cancellation when the work has been finished, the switching schedule then facilitates restoration of the normal running arrangements. Switching components can also be tagged to reflect any Operational Restrictions that are in force. The network component/connectivity model, and associated diagrams, must always be kept absolutely up to date. The switching schedule facility therefore also allows 'patches' to the network model to be applied to the live version at the appropriate stage(s) of the jobs. The term 'patch' is derived from the method previously used to maintain the wallboard diagrams. === State Estimation (SE) === The state estimator is an integral part of the overall monitoring and control systems for transmission networks. It is mainly aimed at providing a reliable estimate of the system voltages. This information from the state estimator flows to control centers and database servers across the network. The variables of interest are indicative of parameters like margins to operating limits, health of equipment and required operator action. State estimators allow the calculation of these variables of interest with high confidence despite the facts that the measurements may be corrupted by noise, or could be missing or inaccurate. Even though we may not be able to directly observe the state, it can be inferred from a scan of measurements which are assumed to be synchronized. The algorithms need to allow for the fact that presence of noise might skew the measurements. In a typical power system, the State is quasi-static. The time constants are sufficiently fast so that system dynamics decay away quickly (with respect to measurement frequency). The system appears to be progressing through a sequence of static states that are driven by various parameters like changes in load profile. The inputs of the state estimator can be given to various applications like Load Flow Analysis, Contingency Analysis, and other applications. === Load Flow Applications (LFA) === Load flow study is an important tool involving numerical analysis applied to a power system. The load flow study usually uses simplified notations like a single-line diagram and focuses on various forms of AC power rather than voltage and current. It analyzes the power systems in normal steady-state operation. The goal of a power flow study is to obtain complete voltage angle and magnitude information for each bus in a power system for specified load and generator real power and voltage conditions. Once this
Read more →
NewSQL

NewSQL is a class of relational database management systems that seek to provide the scalability of NoSQL systems for online transaction processing (OLTP) workloads while maintaining the ACID guarantees of a traditional database system. Many enterprise systems that handle high-profile data (e.g., financial and order processing systems) are too large for conventional relational databases, but have transactional and consistency requirements that are not practical for NoSQL systems. The only options previously available for these organizations were to either purchase more powerful computers or to develop custom middleware that distributes requests over conventional DBMS. Both approaches feature high infrastructure costs and/or development costs. NewSQL systems attempt to reconcile the conflicts. == History == The term was first used by 451 Group analyst Matthew Aslett in a 2011 research paper discussing the rise of a new generation of database management systems. One of the first NewSQL systems was the H-Store parallel database system. == Applications == Typical applications are characterized by heavy OLTP transaction volumes. OLTP transactions; are short-lived (i.e., no user stalls) touch small amounts of data per transaction use indexed lookups (no table scans) have a small number of forms (a small number of queries with different arguments). However, some support hybrid transactional/analytical processing (HTAP) applications. Such systems improve performance and scalability by omitting heavyweight recovery or concurrency control. == List of NewSQL-databases == Apache Trafodion Clustrix CockroachDB Couchbase CrateDB Google Spanner MySQL Cluster NuoDB OceanBase Pivotal GemFire XD SequoiaDB SingleStore was formerly known as MemSQL. TIBCO Active Spaces TiDB TokuDB TransLattice Elastic Database VoltDB YDB YugabyteDB == Features == The two common distinguishing features of NewSQL database solutions are that they support online scalability of NoSQL databases and the relational data model (including ACID consistency) using SQL as their primary interface. NewSQL systems can be loosely grouped into three categories: === New architectures === NewSQL systems adopt various internal architectures. Some systems employ a cluster of shared-nothing nodes, in which each node manages a subset of the data. They include components such as distributed concurrency control, flow control, and distributed query processing. === SQL engines === The second category are optimized storage engines for SQL. These systems provide the same programming interface as SQL, but scale better than built-in engines. === Transparent sharding === These systems automatically split databases across multiple nodes using Raft or Paxos consensus algorithm.
Read more →
Australian Geoscience Data Cube

The Australian Geoscience Data Cube (AGDC) is an approach to storing, processing and analyzing large collections of Earth observation data. The technology is designed to meet challenges of national interest by being agile and flexible with vast amounts of layered grid data. The AGDC reduces processing time of traditional image analysis by calibrating, pre-computing known extents, pixel alignment and storing metadata in a cell lattice structure. The temporal-pixel aligned data can often be analysed faster across space and time dimensions than previous scene based techniques. This allows the AGDC to be flexible in tackling future challenges and improve analysis times on every-increasing data repositories of earth observation. The AGDC has also been used internationally to allow countries to maintain ecologically sustainable programs and reduce the difficulty curve of utilizing Remote Sensing data. == Background == The AGDC was originally conceived by Geoscience Australia but is now maintained in a partnership between Geoscience Australia, Commonwealth Scientific and Industrial Research Organisation (CSIRO) and National Computational Infrastructure National Facility (Australia) (NCI). This is made possible by the funding from the partnership and a number of organisations such as National Collaborative Research Infrastructure Strategy (NCRIS). == Analysis ready data, ingestion and indexing == The data processed in the cube is made analysis ready before being ingested and indexed into the AGDC. Analysis ready data is pre-processed data that has applied corrections for instrument calibration (gains and offsets), geolocation (spatial alignment) and radiometry (solar illumination, incidence angle, topography, atmospheric interference). The ingestion process manages the translation of datasets into the storage units while maintaining a database index. The data within the storage and index can be accessed via API calls often compiled within code such as Python (programming language). Example: s2a_l1c = dc.load(product='s2a_level1c_granule',x=(147.36, 147.41), y=(-35.1, -35.15), measurements=['04','03','02'], output_crs='EPSG:4326', resolution=(-0.00025,0.00025)) === Datasets currently stored === Geoscience Australia Landsat Surface Reflectance (1987 to present) Landsat Pixel Quality Landsat Fractional Cover Landsat NDVI === Datasets that have been piloted === USGS Landsat Surface Reflectance SRTM DEM Himawari 8 MODIS Sentinel-2 L1C / S2A Australian Gridded Climate Data == Open source == The AGDC code base is situated in GitHub as an open repository. The core code base moved to the Open Data Cube in early 2017 as part of an international collaboration. Whilst the code base is the Open Data Cube, individual cubes exist as their own right such as the AGDC on the National Computational Infrastructure National Facility (Australia) (NCI) using the High-Performance Computing Cluster HPCC. The core code can be installed on personal computers or public computers (using git) and has many unit tests. Documentation for the code base exists on Read the Docs. == Challenges of the AGDC == The AGDC is designed to meet nationally significant challenges such as the following. Sustainability Environment Water resource management Disaster assist Policy development Community planning Forest preservation Carbon measurement == International awards == The AGDC won the 2016 Content Platform of the Year award from Geospatial World Forum.
Read more →
Operational data store

An operational data store (ODS) is used for operational reporting and as a source of data for the enterprise data warehouse (EDW). It is a complementary element to an EDW in a decision support environment, and is used for operational reporting, controls, and decision making, as opposed to the EDW, which is used for tactical and strategic decision support. An ODS is a database designed to integrate data from multiple sources for additional operations on the data, for reporting, controls and operational decision support. Unlike a production master data store, the data is not passed back to operational systems. It may be passed for further operations and to the data warehouse for reporting. An ODS should not be confused with an enterprise data hub (EDH). An operational data store will take transactional data from one or more production systems and loosely integrate it, in some respects it is still subject oriented, integrated and time variant, but without the volatility constraints. This integration is mainly achieved through the use of EDW structures and content. An ODS is not an intrinsic part of an EDH solution, although an EDH may be used to subsume some of the processing performed by an ODS and the EDW. An EDH is a broker of data. An ODS is certainly not. Because the data originates from multiple sources, the integration often involves cleaning, resolving redundancy and checking against business rules for integrity. An ODS is usually designed to contain low-level or atomic (indivisible) data (such as transactions and prices) with limited history that is captured "real time" or "near real time" as opposed to the much greater volumes of data stored in the data warehouse generally on a less-frequent basis. == General use == The general purpose of an ODS is to integrate data from disparate source systems in a single structure, using data integration technologies like data virtualization, data federation, or extract, transform, and load (ETL). This will allow operational access to the data for operational reporting, master data or reference data management. An ODS is not a replacement or substitute for a data warehouse or for a data hub but in turn could become a source.
Read more →
Progressive Graphics File

PGF (Progressive Graphics File) is a wavelet-based bitmapped image format that employs lossless and lossy data compression. PGF was created to improve upon and replace the JPEG format. It was developed at the same time as JPEG 2000 but with a focus on speed over compression ratio. PGF can operate at higher compression ratios without taking more encoding/decoding time and without generating the characteristic "blocky and blurry" artifacts of the original DCT-based JPEG standard. It also allows more sophisticated progressive downloads. == Color models == PGF supports a wide variety of color models: Grayscale with 1, 8, 16, or 31 bits per pixel Indexed color with palette size of 256 RGB color image with 12, 16 (red: 5 bits, green: 6 bits, blue: 5 bits), 24, or 48 bits per pixel ARGB color image with 32 bits per pixel Lab color image with 24 or 48 bits per pixel CMYK color image with 32 or 64 bits per pixel == Technical discussion == PGF claims to achieve an improved compression quality over JPEG adding or improving features such as scalability. Its compression performance is similar to the original JPEG standard. Very low and very high compression rates (including lossless compression) are also supported in PGF. The ability of the design to handle a very large range of effective bit rates is one of the strengths of PGF. For example, to reduce the number of bits for a picture below a certain amount, the advisable thing to do with the first JPEG standard is to reduce the resolution of the input image before encoding it — something that is ordinarily not necessary for that purpose when using PGF because of its wavelet scalability properties. The PGF process chain contains the following four steps: Color space transform (in case of color images) Discrete Wavelet Transform Quantization (in case of lossy data compression) Hierarchical bit-plane run-length encoding === Color components transformation === Initially, images have to be transformed from the RGB color space to another color space, leading to three components that are handled separately. PGF uses a fully reversible modified YUV color transform. The transformation matrices are: [ Y r U r V r ] = [ 1 4 1 2 1 4 1 − 1 0 0 − 1 1 ] [ R G B ] ; [ R G B ] = [ 1 3 4 − 1 4 1 − 1 4 − 1 4 1 − 1 4 3 4 ] [ Y r U r V r ] {\displaystyle {\begin{bmatrix}Y_{r}\\U_{r}\\V_{r}\end{bmatrix}}={\begin{bmatrix}{\frac {1}{4}}&{\frac {1}{2}}&{\frac {1}{4}}\\1&-1&0\\0&-1&1\end{bmatrix}}{\begin{bmatrix}R\\G\\B\end{bmatrix}};\qquad \qquad {\begin{bmatrix}R\\G\\B\end{bmatrix}}={\begin{bmatrix}1&{\frac {3}{4}}&-{\frac {1}{4}}\\1&-{\frac {1}{4}}&-{\frac {1}{4}}\\1&-{\frac {1}{4}}&{\frac {3}{4}}\end{bmatrix}}{\begin{bmatrix}Y_{r}\\U_{r}\\V_{r}\end{bmatrix}}} The chrominance components can be, but do not necessarily have to be, down-scaled in resolution. === Wavelet transform === The color components are then wavelet transformed to an arbitrary depth. In contrast to JPEG 1992 which uses an 8x8 block-size discrete cosine transform, PGF uses one reversible wavelet transform: a rounded version of the biorthogonal CDF 5/3 wavelet transform. This wavelet filter bank is exactly the same as the reversible wavelet used in JPEG 2000. It uses only integer coefficients, so the output does not require rounding (quantization) and so it does not introduce any quantization noise. === Quantization === After the wavelet transform, the coefficients are scalar-quantized to reduce the amount of bits to represent them, at the expense of a loss of quality. The output is a set of integer numbers which have to be encoded bit-by-bit. The parameter that can be changed to set the final quality is the quantization step: the greater the step, the greater is the compression and the loss of quality. With a quantization step that equals 1, no quantization is performed (it is used in lossless compression). In contrast to JPEG 2000, PGF uses only powers of two, therefore the parameter value i represents a quantization step of 2i. Just using powers of two makes no need of integer multiplication and division operations. === Coding === The result of the previous process is a collection of sub-bands which represent several approximation scales. A sub-band is a set of coefficients — integer numbers which represent aspects of the image associated with a certain frequency range as well as a spatial area of the image. The quantized sub-bands are split further into blocks, rectangular regions in the wavelet domain. They are typically selected in a way that the coefficients within them across the sub-bands form approximately spatial blocks in the (reconstructed) image domain and collected in a fixed size macroblock. The encoder has to encode the bits of all quantized coefficients of a macroblock, starting with the most significant bits and progressing to less significant bits. In this encoding process, each bit-plane of the macroblock gets encoded in two so-called coding passes, first encoding bits of significant coefficients, then refinement bits of significant coefficients. Clearly, in lossless mode all bit-planes have to be encoded, and no bit-planes can be dropped. Only significant coefficients are compressed with an adaptive run-length/Rice (RLR) coder, because they contain long runs of zeros. The RLR coder with parameter k (logarithmic length of a run of zeros) is also known as the elementary Golomb code of order 2k. === Comparison with other file formats === JPEG 2000 is slightly more space-efficient in handling natural images. The PSNR for the same compression ratio is on average 3% better than the PSNR of PGF. It has a small advantage in compression ratio but longer encoding and decoding times. PNG (Portable Network Graphics) is more space-efficient in handling images with many pixels of the same color. There are several self-proclaimed advantages of PGF over the ordinary JPEG standard: Superior compression performance: The image quality (measured in PSNR) for the same compression ratio is on average 3% better than the PSNR of JPEG. At lower bit rates (e.g. less than 0.25 bits/pixel for gray-scale images), PGF has a much more significant advantage over certain modes of JPEG: artifacts are less visible and there is almost no blocking. The compression gains over JPEG are attributed to the use of DWT. Multiple resolution representation: PGF provides seamless compression of multiple image components, with each component carrying from 1 to 31 bits per component sample. With this feature there is no need for separately stored preview images (thumbnails). Progressive transmission by resolution accuracy, commonly referred to as progressive decoding: PGF provides efficient code-stream organizations which are progressive by resolution. This way, after a smaller part of the whole file has been received, it is possible to see a lower quality of the final picture, the quality can be improved monotonically getting more data from the source. Lossless and lossy compression: PGF provides both lossless and lossy compression in a single compression architecture. Both lossy and lossless compression are provided by the use of a reversible (integer) wavelet transform. Side channel spatial information: Transparency and alpha planes are fully supported ROI extraction: Since version 5, PGF supports extraction of regions of interest (ROI) without decoding the whole image. == Available software == The author published libPGF via a SourceForge, under the GNU Lesser General Public License version 2.0. Xeraina offers a free Windows console encoder and decoder, and PGF viewers based on WIC for 32bit and 64bit Windows platforms. Other WIC applications including File Explorer are able to display PGF images after installing this viewer. Digikam is a popular open-source image editing and cataloging software that uses libPGF for its thumbnails. It makes use of the progressive decoding feature of PGF images to store a single version of each thumbnail, which can then be decoded to different resolutions without loss, thus allowing users to dynamically change the size of the thumbnails without having to recalculate them again.
Read more →
Information logistics

Information Logistics (IL) deals with the flow of information between human or machine actors within or between any number of organizations that in turn form a value creating network (see, e.g.). IL is closely related to information management, information operations and information technology. == Definition == The term Information Logistics (IL) may be used in either of two ways: Firstly, it can be defined as "managing and controlling information handling processes optimally with respect to time (flow time and capacity), storage, distribution and presentation in such a way that it contributes to company results in concurrence with the costs of capturing (creation, searching, maintenance etc)." (Petri,2017) Thus IL utilizes logistic principles to optimize information handling. Secondly, IL can be seen as a concept using information technology to optimize logistics. A term which is closely related to the first meaning of Information Logistics is Data Logistics, a concept used in Computer Networking. "The study of solutions to problems in Computer Systems that flexibly span resources and services relating to Data Movement, Data Storage and Data Processing." [ref?] Systems that support general Data Logistics solutions thus must span the traditionally separate fields of Networking, File/Database Systems and Process Management. Data Logistics is a more general form of the term Logistical Networking, used as the name of a particular network storage architecture and software stack. == Goal == The goal of Information Logistics is to deliver the right product, consisting of the right information element, in the right format, at the right place at the right time for the right people at the right price and all of this is customer demand driven. If this goal is to be achieved, knowledge workers are best equipped with information for the task at hand for improved interaction with its customers and machines are enabled to respond automatically to meaningful information. Methods for achieving the goal are: the analysis of information demand intelligent information storage the optimization of the flow of information maintaining both security and organizational flexibility integrated information and billing solutions The expression was formed by the Indian mathematician and librarian S. R. Ranganathan . The supply of a product is part of the discipline Logistics. The purpose of this discipline is described as follows: Logistics is the teachings of the plans and the effective and efficient run of supply. The contemporary logistics focuses on the organization, planning, control and implementation of the flow of goods, money, information and people. Information Logistics focusses on information. Information (from Latin informare: "shape, shapes, instruct") means in a general sense everything that adds knowledge and thus reduce ignorance or lack of precision. In a stricter sense, raw data only becomes information to those who can interpret it. Interpreting relevant, related information produces insight that either leads to existing, or eventually builds new, knowledge. == Information element == An information element (IE) is an information component that is located in the organizational value chain. The combination of certain IEs leads to an information product (IP), which is any final product in the form of information that a person needs to have. When a higher number of different IEs are required, it often results in more planning problems in capacity and inherently leads to a non-delivery of the IP. To illustrate the concept of an IP, an example is shown of a bottleneck analysis in HR (by J. Willems 2008). Here, the illustration shows how the information elements (e.g. qualifications) build up the information product (e.g. HR file). == Data logistics == Data logistics is a concept that developed independently of information logistics in the 1990s, in response to the explosion of Internet content and traffic due to the invention of the World Wide Web (WWW). Some motivations for the emergence of interest in Data Logistics included: The incorporation of network hyperlinks into content encoded in HTML encouraged users to freely dereference those links without regard to, or in many cases without even having any knowledge of, the identity (much less the geographical or network topological location of) the target Web server. The growth in the volume of Web hits, combined with the steady increase in the size of Web-delivered objects such as images, audio and video clips resulted in the localized overloading of the bandwidth and processing resources of the local and/or wide area network and/or the Web server infrastructure. The resulting Internet bottleneck can cause Web clients to experience poor performance or complete denial of access to servers that host high volume sites (the so-called Slashdot effect). The growth in all Internet traffic, especially across international telecommunication links, resulted in stress to institutional infrastructure and high costs on networks that billed Internet traffic on a per-use basis. Much of this traffic was redundant, the results of repeated requests by many independent users to access the same stored files and content. Large files and content retrieved from distant Web servers was often delayed due to high delays experienced over long and complex Internet paths. These factors led to interest in the use of large scale storage (and to a lesser extent, processing) resources to cache the response to network requests, first at the Internet endpoint using a Web browser cache and later at intermediate network locations using shared network caches. This line of development also gave rise to Web server replication and other techniques for offloading and distributing the work of delivering large volume Web services to widely dispersed client communities, ultimately resulting in the creation of modern Content delivery networks. At the same time, research efforts in server replication and content delivery gave rise to a number of related projects and strategies, including Logistical Networking (LN). The name LN was intended as an analogy to physical supply chain logistics, in which goods are not only carried from source to destination on networks of roads, but are also stored at warehouses located throughout the transportation infrastructure. This led to a nomenclature in which LN network storage resources are termed "storage depots". The principles that underpin LN have been abstracted into the more general study of scheduling and optimization across the traditional infrastructure silos of Storage, Networking and Processing which was named Data Logistics. === Illustrative examples of data logistics === Data Caching and Replication are classic examples of Data Logistics solutions to problems in Computer Systems and Networking with high data access latencies or data transfer resource limitations. It works mainly across the areas of data transfer and data storage. Dynamic Compression in data transfer is another example which uses computational resources to minimize the bandwidth requirements of data transfer.
Read more →
Vinelink.com

Vinelink.com (VINE) is a national website in the United States that allows victims of crime, and the general public, to track the movements of prisoners held by the various states and territories. The first four letters in the websites name, "vine", are an acronym for "Victim Information and Notification Everyday". Vinelink.com displays information, based on the information provided by the various states' departments of correction and other law enforcement agencies, on whether an inmate is in custody, has been released, has been granted parole or probation, or has escaped from custody. In some cases, the website will reveal whether a defendant has been granted parole or probation, but then subsequently violated conditions of their release and become a fugitive. Information provided on Vinelink.com represents metadata, in that the website lists a defendant's custody status; but does not list what the individual is charged with, their criminal history, or the amount of their bail, if applicable. Internet users accessing the Vinelink.com website choose from a map of states and provinces within the United States where they wish to perform a search for an inmate. The user may then search for an individual using the inmate's or parolee's name, or by entering the inmate's specific department of corrections inmate number, if known. When the inmate's custody status changes, users who have registered to be notified of such changes will be notified via email, phone or both. This information is currently released upon request, without the website requesting reasons for the users search or requiring payment, as public records available to the general public. Inmate information is available for most states, and for Puerto Rico, on the website. The states of Arizona, Georgia, Massachusetts, Montana, New Hampshire and West Virginia provide very limited information on the site. In March of 2025, The Maine Sheriff's Association entered into a contract to pilot the use of the VINE system in three counties in the state as well as a regional jail, therefore making South Dakota the only state that does not participate in the VINE system to any degree. The website does not provide data on prisoners detained by the Federal Bureau of Prisons which has its own inmate locator web site nor for inmates of the U.S. military prisons.
Read more →