AI Content Detector Zero

AI Content Detector Zero — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Hybrid intelligent system

  Hybrid intelligent system denotes a software system which employs, in parallel, a combination of methods and techniques from artificial intelligence subfields, such as: Neuro-symbolic systems Neuro-fuzzy systems Hybrid connectionist-symbolic models Fuzzy expert systems Connectionist expert systems Evolutionary neural networks Genetic fuzzy systems Rough fuzzy hybridization Reinforcement learning with fuzzy, neural, or evolutionary methods as well as symbolic reasoning methods. From the cognitive science perspective, every natural intelligent system is hybrid because it performs mental operations on both the symbolic and subsymbolic levels. For the past few years, there has been an increasing discussion of the importance of A.I. Systems Integration. Based on notions that there have already been created simple and specific AI systems (such as systems for computer vision, speech synthesis, etc., or software that employs some of the models mentioned above) and now is the time for integration to create broad AI systems. Proponents of this approach are researchers such as Marvin Minsky, Ron Sun, Aaron Sloman, Angelo Dalli and Michael A. Arbib. An example hybrid is a hierarchical control system in which the lowest, reactive layers are sub-symbolic. The higher layers, having relaxed time constraints, are capable of reasoning from an abstract world model and performing planning (even by hybrid wisdom). Intelligent systems usually rely on hybrid reasoning processes, which include induction, deduction, abduction and reasoning by analogy.

  Read more →
• 

  Ordination (statistics)

  Ordination or gradient analysis, in multivariate analysis, is a method complementary to data clustering, and used mainly in exploratory data analysis (rather than in hypothesis testing). In contrast to cluster analysis, ordination orders quantities in a (usually lower-dimensional) latent space. In the ordination space, quantities that are near each other share attributes (i.e., are similar to some degree), and dissimilar objects are farther from each other. Such relationships between the objects, on each of several axes or latent variables, are then characterized numerically and/or graphically in a biplot. The first ordination method, principal components analysis, was suggested by Karl Pearson in 1901. == Methods == Ordination methods can broadly be categorized in eigenvector-, algorithm-, or model-based methods. Many classical ordination techniques, including principal components analysis, correspondence analysis (CA) and its derivatives (detrended correspondence analysis, canonical correspondence analysis, and redundancy analysis, belong to the first group). The second group includes some distance-based methods such as non-metric multidimensional scaling, and machine learning methods such as T-distributed stochastic neighbor embedding and nonlinear dimensionality reduction. The third group includes model-based ordination methods, which can be considered as multivariate extensions of Generalized Linear Models. Model-based ordination methods are more flexible in their application than classical ordination methods, so that it is for example possible to include random-effects. Unlike in the aforementioned two groups, there is no (implicit or explicit) distance measure in the ordination. Instead, a distribution needs to be specified for the responses as is typical for statistical models. These and other assumptions, such as the assumed mean-variance relationship, can be validated with the use of residual diagnostics, unlike in other ordination methods. == Applications == Ordination can be used on the analysis of any set of multivariate objects. It is frequently used in several environmental or ecological sciences, particularly plant community ecology. It is also used in genetics and systems biology for microarray data analysis and in psychometrics.

  Read more →
• 

  Computational learning theory

  In computer science, computational learning theory (or just learning theory) is a subfield of artificial intelligence devoted to studying the design and analysis of machine learning algorithms. == Overview == Theoretical results in machine learning often focus on a type of inductive learning known as supervised learning. In supervised learning, an algorithm is provided with labeled samples. For instance, the samples might be descriptions of mushrooms, with labels indicating whether they are edible or not. The algorithm uses these labeled samples to create a classifier. This classifier assigns labels to new samples, including those it has not previously encountered. The goal of the supervised learning algorithm is to optimize performance metrics, such as minimizing errors on new samples. In addition to performance bounds, computational learning theory studies the time complexity and feasibility of learning . In computational learning theory, a computation is considered feasible if it can be done in polynomial time . There are two kinds of time complexity results: Positive results – Showing that a certain class of functions is learnable in polynomial time. Negative results – Showing that certain classes cannot be learned in polynomial time. Negative results often rely on commonly believed, but yet unproven assumptions, such as: Computational complexity – P ≠ NP (the P versus NP problem); Cryptographic – One-way functions exist. There are several different approaches to computational learning theory based on making different assumptions about the inference principles used to generalise from limited data. This includes different definitions of probability (see frequency probability, Bayesian probability) and different assumptions on the generation of samples. The different approaches include: Exact learning, proposed by Dana Angluin; Probably approximately correct learning (PAC learning), proposed by Leslie Valiant; VC theory, proposed by Vladimir Vapnik and Alexey Chervonenkis; Inductive inference as developed by Ray Solomonoff; Algorithmic learning theory, from the work of E. Mark Gold; Online machine learning, from the work of Nick Littlestone. While its primary goal is to understand learning abstractly, computational learning theory has led to the development of practical algorithms. For example, PAC theory inspired boosting, VC theory led to support vector machines, and Bayesian inference led to belief networks.

  Read more →
• 

  Premature convergence

  Premature convergence is an unwanted effect in evolutionary algorithms (EA), a metaheuristic that mimics the basic principles of biological evolution as a computer algorithm for solving an optimization problem. The effect means that the population of an EA has converged too early, resulting in being suboptimal. In this context, the parental solutions, through the aid of genetic operators, are not able to generate offspring that are superior to, or outperform, their parents. Premature convergence is a common problem found in evolutionary algorithms, as it leads to a loss, or convergence of, a large number of alleles, subsequently making it very difficult to search for a specific gene in which the alleles were present. An allele is considered lost if, in a population, a gene is present, where all individuals are sharing the same value for that particular gene. An allele is, as defined by De Jong, considered to be a converged allele, when 95% of a population share the same value for a certain gene. == Strategies for preventing premature convergence == Strategies to regain genetic variation can be: a mating strategy called incest prevention, uniform crossover, mimicking sexual selection, favored replacement of similar individuals (preselection or crowding), segmentation of individuals of similar fitness (fitness sharing), increasing population size niche and specie The genetic variation can also be regained by mutation though this process is highly random. A general strategy to reduce the risk of premature convergence is to use structured populations instead of the commonly used panmictic ones. == Identification of the occurrence of premature convergence == It is hard to determine when premature convergence has occurred, and it is equally hard to predict its presence in the future. One measure is to use the difference between the average and maximum fitness values, as used by Patnaik & Srinivas, to then vary the crossover and mutation probabilities. Population diversity is another measure which has been extensively used in studies to measure premature convergence. However, although it has been widely accepted that a decrease in the population diversity directly leads to premature convergence, there have been little studies done on the analysis of population diversity. In other words, by using the term population diversity, the argument for a study in preventing premature convergence lacks robustness, unless specified what their definition of population diversity is. There are models to counter the effect and risk of premature convergence that do not compromise core GA parameters like population size, mutation rate, and other core mechanisms. These models were inspired by biological ecology, where genetic interactions are limited by external mechanisms such as spatial topologies or speciation. These ecological models, such as the Eco-GA, adopt diffusion-based strategies to improve the robustness of GA runs and increase the likelihood of reaching near-global optima. == Causes for premature convergence == There are a number of presumed or hypothesized causes for the occurrence of premature convergence. === Self-adaptive mutations === Rechenberg introduced the idea of self-adaptation of mutation distributions in evolution strategies. According to Rechenberg, the control parameters for these mutation distributions evolved internally through self-adaptation, rather than predetermination. He called it the 1/5-success rule of evolution strategies (1 + 1)-ES: The step size control parameter would be increased by some factor if the relative frequency of positive mutations through a determined period of time is larger than 1/5, vice versa if it is smaller than 1/5. Self-adaptive mutations may very well be one of the causes for premature convergence. Accurately locating of optima can be enhanced by self-adaptive mutation, as well as accelerating the search for this optima. This has been widely recognized, though the mechanism's underpinnings of this have been poorly studied, as it is often unclear whether the optima is found locally or globally. Self-adaptive methods can cause global convergence to global optimum, provided that the selection methods used are using elitism, as well as that the rule of self-adaptation doesn't interfere with the mutation distribution, which has the property of ensuring a positive minimum probability when hitting a random subset. This is for non-convex objective functions with sets that include bounded lower levels of non-zero measurements. A study by Rudolph suggests that self-adaption mechanisms among elitist evolution strategies do resemble the 1/5-success rule, and could very well get caught by a local optimum that include a positive probability. === Panmictic populations === Most EAs use unstructured or panmictic populations where basically every individual in the population is eligible for mate selection based on fitness. Thus, The genetic information of an only slightly better individual can spread in a population within a few generations, provided that no better other offspring is produced during this time. Especially in comparatively small populations, this can quickly lead to a loss of genotypic diversity and thus to premature convergence. A well-known countermeasure is to switch to alternative population models which introduce substructures into the population that preserve genotypic diversity over a longer period of time and thus counteract the tendency towards premature convergence. This has been shown for various EAs such as genetic algorithms, the evolution strategy, other EAs or memetic algorithms.

  Read more →
• 

  Cloud manufacturing

  Cloud manufacturing (CMfg) is a new manufacturing paradigm developed from existing advanced manufacturing models (e.g., ASP, AM, NM, MGrid) and enterprise information technologies under the support of cloud computing, Internet of Things (IoT), virtualization and service-oriented technologies, and advanced computing technologies. It transforms manufacturing resources and manufacturing capabilities into manufacturing services, which can be managed and operated in an intelligent and unified way to enable the full sharing and circulating of manufacturing resources and manufacturing capabilities. CMfg can provide safe and reliable, high quality, cheap and on-demand manufacturing services for the whole lifecycle of manufacturing. The concept of manufacturing here refers to big manufacturing that includes the whole lifecycle of a product (e.g. design, simulation, production, test, maintenance). The concept of Cloud manufacturing was initially proposed by the research group led by Prof. Bo Hu Li and Prof. Lin Zhang in China in 2010. Related discussions and research were conducted hereafter, and some similar definitions (e.g. Cloud-Based Design and Manufacturing (CBDM). ) to cloud manufacturing were introduced. Cloud manufacturing is a type of parallel, networked, and distributed system consisting of an integrated and inter-connected virtualized service pool (manufacturing cloud) of manufacturing resources and capabilities as well as capabilities of intelligent management and on-demand use of services to provide solutions for all kinds of users involved in the whole lifecycle of manufacturing. == Types == Cloud Manufacturing can be divided into two categories. The first category concerns deploying manufacturing software on the Cloud, i.e. a “manufacturing version” of Computing. CAx software can be supplied as a service on the Manufacturing Cloud (MCloud). The second category has a broader scope, cutting across production, management, design and engineering abilities in a manufacturing business. Unlike with computing and data storage, manufacturing involves physical equipment, monitors, materials and so on. In this kind of Cloud Manufacturing system, both material and non-material facilities are implemented on the Manufacturing Cloud to support the whole supply chain. Costly resources are shared on the network. This means that the utilisation rate of rarely used equipment rises and the cost of expensive equipment is reduced. According to the concept of Cloud technology, there will not be direct interaction between Cloud Users and Service Providers. The Cloud User should neither manage nor control the infrastructure and manufacturing applications. As a matter of fact, the former can be considered part of the latter. In CMfg system, various manufacturing resources and abilities can be intelligently sensed and connected into wider Internet, and automatically managed and controlled using IoT technologies (e.g., RFID, wired and wireless sensor network, embedded system). Then the manufacturing resources and abilities are virtualized and encapsulated into different manufacturing cloud services (MCSs), that can be accessed, invoked, and deployed based on knowledge by using virtualization technologies, service-oriented technologies, and cloud computing technologies. The MCSs are classified and aggregated according to specific rules and algorithms, and different kinds of manufacturing clouds are constructed. Different users can search and invoke the qualified MCSs from related manufacturing cloud according to their needs, and assemble them to be a virtual manufacturing environment or solution to complete their manufacturing task involved in the whole life cycle of manufacturing processes under the support of cloud computing, service-oriented technologies, and advanced computing technologies. Four types of cloud deployment modes (public, private, community and hybrid clouds) are ubiquitous as a single point of access. Private cloud refers to a centralized management effort in which manufacturing services are shared within one company or its subsidiaries. Enterprises' mission-critical and core-business applications are often kept in a private cloud. Community cloud is a collaborative effort in which manufacturing services are shared between several organizations from a specific community with common concerns. Public cloud realizes the key concept of sharing services with the general public in a multi-tenant environment. Hybrid cloud is a composition of two or more clouds (private, community or public) that remain distinct entities but are also bound together, offering the benefits of multiple deployment modes. == Resources == From the resource’s perspective, each kind of manufacturing capability requires support from the related manufacturing resource. For each type of manufacturing capability, its related manufacturing resource comes in two forms, soft resources and hard resources. === Soft resources === Software: software applications throughout the product lifecycle including design, analysis, simulation, process planning, and are only beginning to be embraced by the electronics manufacturing industry. Knowledge: experience and know-how needed to complete a production task, i.e. engineering knowledge, product models, standards, evaluation procedures and results, customer feedback, and manufacturing in the cloud provides just as many solutions as the number of questions it also raises for manufacturing executives wanting to make the best possible decision. Skill: expertise in performing a specific manufacturing task. Personnel: human resource engaged in the manufacturing process, i.e. designers, operators, managers, technicians, project teams, customer service, etc. Experience: performance, quality, client evaluation, etc. Business Network: business relationships and business opportunity networks that exist in an enterprise. === Hard resources === Manufacturing Equipment: facilities needed for completing a manufacturing task, e.g. machine tools, cutters, test and monitoring equipment and other fabrication tools. Monitoring/Control Resource: devices used to identify and control other manufacturing resource, for instance, RFID (Radio-Frequency IDentification), WSN (Wireless Sensor Network), virtual managers and remote controllers. Computational Resource: computing devices to support production process, e.g. servers, computers, storage media, control devices, etc. Materials: inputs and outputs in a production system, e.g. raw material, product-in-progress, finished product, power, water, lubricants, etc. Storage: automated storage and retrieval systems, logic controllers, location of warehouses, volume capacity and schedule/optimization methods. Transportation: movement of manufacturing inputs/outputs from one location to another. It includes the modes of transport, e.g. air, rail, road, water, cable, pipeline and space, and the related price, and time taken.

  Read more →
• 

  SqueezeNet

  SqueezeNet is a deep neural network for image classification released in 2016. SqueezeNet was developed by researchers at DeepScale, University of California, Berkeley, and Stanford University. In designing SqueezeNet, the authors' goal was to create a smaller neural network with fewer parameters while achieving competitive accuracy. Their best-performing model achieved the same accuracy as AlexNet on ImageNet classification, but has a size 510x less than it. == Version history == SqueezeNet was originally released on February 22, 2016. This original version of SqueezeNet was implemented on top of the Caffe deep learning software framework. Shortly thereafter, the open-source research community ported SqueezeNet to a number of other deep learning frameworks. On February 26, 2016, Eddie Bell released a port of SqueezeNet for the Chainer deep learning framework. On March 2, 2016, Guo Haria released a port of SqueezeNet for the Apache MXNet framework. On June 3, 2016, Tammy Yang released a port of SqueezeNet for the Keras framework. In 2017, companies including Baidu, Xilinx, Imagination Technologies, and Synopsys demonstrated SqueezeNet running on low-power processing platforms such as smartphones, FPGAs, and custom processors. As of 2018, SqueezeNet ships "natively" as part of the source code of a number of deep learning frameworks such as PyTorch, Apache MXNet, and Apple CoreML. In addition, third party developers have created implementations of SqueezeNet that are compatible with frameworks such as TensorFlow. Below is a summary of frameworks that support SqueezeNet. == Relationship to other networks == === AlexNet === SqueezeNet was originally described in SqueezeNet: AlexNet-level accuracy with 50x fewer parameters and <0.5MB model size. AlexNet is a deep neural network that has 240 MB of parameters, and SqueezeNet has just 5 MB of parameters. This small model size can more easily fit into computer memory and can more easily be transmitted over a computer network. However, it's important to note that SqueezeNet is not a "squeezed version of AlexNet." Rather, SqueezeNet is an entirely different DNN architecture than AlexNet. What SqueezeNet and AlexNet have in common is that both of them achieve approximately the same level of accuracy when evaluated on the ImageNet image classification validation dataset. === Model compression === Model compression (e.g. quantization and pruning of model parameters) can be applied to a deep neural network after it has been trained. In the SqueezeNet paper, the authors demonstrated that a model compression technique called Deep Compression can be applied to SqueezeNet to further reduce the size of the parameter file from 5 MB to 500 KB. Deep Compression has also been applied to other DNNs, such as AlexNet and VGG. == Variants == Some of the members of the original SqueezeNet team have continued to develop resource-efficient deep neural networks for a variety of applications. A few of these works are noted in the following table. As with the original SqueezeNet model, the open-source research community has ported and adapted these newer "squeeze"-family models for compatibility with multiple deep learning frameworks. In addition, the open-source research community has extended SqueezeNet to other applications, including semantic segmentation of images and style transfer.

  Read more →
• 

  Linear discriminant analysis

  Linear discriminant analysis (LDA), normal discriminant analysis (NDA), canonical variates analysis (CVA), or discriminant function analysis is a generalization of Fisher's linear discriminant, a method used in statistics and other fields, to find a linear combination of features that characterizes or separates two or more classes of objects or events. The resulting combination may be used as a linear classifier, or, more commonly, for dimensionality reduction before later classification. LDA is closely related to analysis of variance (ANOVA) and regression analysis, which also attempt to express one dependent variable as a linear combination of other features or measurements. However, ANOVA uses categorical independent variables and a continuous dependent variable, whereas discriminant analysis has continuous independent variables and a categorical dependent variable (i.e. the class label). Logistic regression and probit regression are more similar to LDA than ANOVA is, as they also explain a categorical variable by the values of continuous independent variables. These other methods are preferable in applications where it is not reasonable to assume that the independent variables have a normal distribution, which is a fundamental assumption of the LDA method. LDA is also closely related to principal component analysis (PCA) and factor analysis in that they both look for linear combinations of variables which best explain the data. LDA explicitly attempts to model the difference between the classes of data. PCA, in contrast, does not take into account any difference in class, and factor analysis builds the feature combinations based on similarities rather than differences. Discriminant analysis is also different from factor analysis in that it is not an interdependence technique: a distinction between independent variables and dependent variables (also called criterion variables) must be made. LDA works when the measurements made on independent variables for each observation are continuous quantities. When dealing with categorical independent variables, the equivalent technique is discriminant correspondence analysis. Discriminant analysis is used when groups are known a priori (unlike in cluster analysis). Each case must have a score on one or more quantitative predictor measures, and a score on a group measure. In simple terms, discriminant function analysis is classification - the act of distributing things into groups, classes or categories of the same type. == History == The original dichotomous discriminant analysis was developed by Sir Ronald Fisher in 1936. It is different from an ANOVA or MANOVA, which is used to predict one (ANOVA) or multiple (MANOVA) continuous dependent variables by one or more independent categorical variables. Discriminant function analysis is useful in determining whether a set of variables is effective in predicting category membership. == LDA for two classes == Consider a set of observations x → {\displaystyle {\vec {x}}} (also called features, attributes, variables or measurements) for each sample of an object or event with known class y {\displaystyle y} . This set of samples is called the training set in a supervised learning context. The classification problem is then to find a good predictor for the class y {\displaystyle y} of any sample of the same distribution (not necessarily from the training set) given only an observation x → {\displaystyle {\vec {x}}} . LDA approaches the problem by assuming that the conditional probability density functions p ( x → | y = 0 ) {\displaystyle p({\vec {x}}|y=0)} and p ( x → | y = 1 ) {\displaystyle p({\vec {x}}|y=1)} are both the normal distribution with mean and covariance parameters ( μ → 0 , Σ 0 ) {\displaystyle \left({\vec {\mu }}_{0},\Sigma _{0}\right)} and ( μ → 1 , Σ 1 ) {\displaystyle \left({\vec {\mu }}_{1},\Sigma _{1}\right)} , respectively. Under this assumption, the Bayes-optimal solution is to predict points as being from the second class if the log of the likelihood ratios is bigger than some threshold T, so that: 1 2 ( x → − μ → 0 ) T Σ 0 − 1 ( x → − μ → 0 ) + 1 2 ln ⁡ | Σ 0 | − 1 2 ( x → − μ → 1 ) T Σ 1 − 1 ( x → − μ → 1 ) − 1 2 ln ⁡ | Σ 1 | > T {\displaystyle {\frac {1}{2}}({\vec {x}}-{\vec {\mu }}_{0})^{\mathrm {T} }\Sigma _{0}^{-1}({\vec {x}}-{\vec {\mu }}_{0})+{\frac {1}{2}}\ln |\Sigma _{0}|-{\frac {1}{2}}({\vec {x}}-{\vec {\mu }}_{1})^{\mathrm {T} }\Sigma _{1}^{-1}({\vec {x}}-{\vec {\mu }}_{1})-{\frac {1}{2}}\ln |\Sigma _{1}|\ >\ T} Without any further assumptions, the resulting classifier is referred to as quadratic discriminant analysis (QDA). LDA instead makes the additional simplifying homoscedasticity assumption (i.e. that the class covariances are identical, so Σ 0 = Σ 1 = Σ {\displaystyle \Sigma _{0}=\Sigma _{1}=\Sigma } ) and that the covariances have full rank. In this case, several terms cancel: x → T Σ 0 − 1 x → = x → T Σ 1 − 1 x → {\displaystyle {\vec {x}}^{\mathrm {T} }\Sigma _{0}^{-1}{\vec {x}}={\vec {x}}^{\mathrm {T} }\Sigma _{1}^{-1}{\vec {x}}} x → T Σ i − 1 μ → i = μ → i T Σ i − 1 x → {\displaystyle {\vec {x}}^{\mathrm {T} }{\Sigma _{i}}^{-1}{\vec {\mu }}_{i}={{\vec {\mu }}_{i}}^{\mathrm {T} }{\Sigma _{i}}^{-1}{\vec {x}}} because both sides are scalar and transpose to each other ( Σ i {\displaystyle \Sigma _{i}} is Hermitian) and the above decision criterion becomes a threshold on the dot product w → T x → > c {\displaystyle {\vec {w}}^{\mathrm {T} }{\vec {x}}>c} for some threshold constant c, where w → = Σ − 1 ( μ → 1 − μ → 0 ) {\displaystyle {\vec {w}}=\Sigma ^{-1}({\vec {\mu }}_{1}-{\vec {\mu }}_{0})} c = 1 2 w → T ( μ → 1 + μ → 0 ) {\displaystyle c={\frac {1}{2}}\,{\vec {w}}^{\mathrm {T} }({\vec {\mu }}_{1}+{\vec {\mu }}_{0})} This means that the criterion of an input x → {\displaystyle {\vec {x}}} being in a class y {\displaystyle y} is purely a function of this linear combination of the known observations. It is often useful to see this conclusion in geometrical terms: the criterion of an input x → {\displaystyle {\vec {x}}} being in a class y {\displaystyle y} is purely a function of projection of multidimensional-space point x → {\displaystyle {\vec {x}}} onto vector w → {\displaystyle {\vec {w}}} (thus, we only consider its direction). In other words, the observation belongs to y {\displaystyle y} if corresponding x → {\displaystyle {\vec {x}}} is located on a certain side of a hyperplane perpendicular to w → {\displaystyle {\vec {w}}} . The location of the plane is defined by the threshold c {\displaystyle c} . == Assumptions == The assumptions of discriminant analysis are the same as those for MANOVA. The analysis is quite sensitive to outliers and the size of the smallest group must be larger than the number of predictor variables. Multivariate normality: Independent variables are normal for each level of the grouping variable. Homogeneity of variance/covariance (homoscedasticity): Variances among group variables are the same across levels of predictors. Can be tested with Box's M statistic. It has been suggested, however, that linear discriminant analysis be used when covariances are equal, and that quadratic discriminant analysis may be used when covariances are not equal. Independence: Participants are assumed to be randomly sampled, and a participant's score on one variable is assumed to be independent of scores on that variable for all other participants. It has been suggested that discriminant analysis is relatively robust to slight violations of these assumptions, and it has also been shown that discriminant analysis may still be reliable when using dichotomous variables (where multivariate normality is often violated). == Discriminant functions == Discriminant analysis works by creating one or more linear combinations of predictors, creating a new latent variable for each function. These functions are called discriminant functions. The number of functions possible is either N g − 1 {\displaystyle N_{g}-1} where N g {\displaystyle N_{g}} = number of groups, or p {\displaystyle p} (the number of predictors), whichever is smaller. The first function created maximizes the differences between groups on that function. The second function maximizes differences on that function, but also must not be correlated with the previous function. This continues with subsequent functions with the requirement that the new function not be correlated with any of the previous functions. Given group j {\displaystyle j} , with R j {\displaystyle \mathbb {R} _{j}} sets of sample space, there is a discriminant rule such that if x ∈ R j {\displaystyle x\in \mathbb {R} _{j}} , then x ∈ j {\displaystyle x\in j} . Discriminant analysis then, finds “good” regions of R j {\displaystyle \mathbb {R} _{j}} to minimize classification error, therefore leading to a high percent correct classified in the classification table. Each function is given a discriminant score to determine how well it predicts group placement. Structure Corr

  Read more →
• 

  Triplet loss

  Triplet loss is a machine learning loss function widely used in one-shot learning, a setting where models are trained to generalize effectively from limited examples. It was conceived by Google researchers for their prominent FaceNet algorithm for face detection. Triplet loss is designed to support metric learning. Namely, to assist training models to learn an embedding (mapping to a feature space) where similar data points are closer together and dissimilar ones are farther apart, enabling robust discrimination across varied conditions. In the context of face detection, data points correspond to images. == Definition == The loss function is defined using triplets of training points of the form ( A , P , N ) {\displaystyle (A,P,N)} . In each triplet, A {\displaystyle A} (called an "anchor point") denotes a reference point of a particular identity, P {\displaystyle P} (called a "positive point") denotes another point of the same identity in point A {\displaystyle A} , and N {\displaystyle N} (called a "negative point") denotes a point of an identity different from the identity in point A {\displaystyle A} and P {\displaystyle P} . Let x {\displaystyle x} be some point and let f ( x ) {\displaystyle f(x)} be the embedding of x {\displaystyle x} in the finite-dimensional Euclidean space. It shall be assumed that the L2-norm of f ( x ) {\displaystyle f(x)} is unity (the L2 norm of a vector X {\displaystyle X} in a finite dimensional Euclidean space is denoted by ‖ X ‖ {\displaystyle \Vert X\Vert } .) We assemble m {\displaystyle m} triplets of points from the training dataset. The goal of training here is to ensure that, after learning, the following condition (called the "triplet constraint") is satisfied by all triplets ( A ( i ) , P ( i ) , N ( i ) ) {\displaystyle (A^{(i)},P^{(i)},N^{(i)})} in the training data set: ‖ f ( A ( i ) ) − f ( P ( i ) ) ‖ 2 2 + α < ‖ f ( A ( i ) ) − f ( N ( i ) ) ‖ 2 2 {\displaystyle \Vert f(A^{(i)})-f(P^{(i)})\Vert _{2}^{2}+\alpha <\Vert f(A^{(i)})-f(N^{(i)})\Vert _{2}^{2}} The variable α {\displaystyle \alpha } is a hyperparameter called the margin, and its value must be set manually. In the FaceNet system, its value was set as 0.2. Thus, the full form of the function to be minimized is the following: L = ∑ i = 1 m max ( ‖ f ( A ( i ) ) − f ( P ( i ) ) ‖ 2 2 − ‖ f ( A ( i ) ) − f ( N ( i ) ) ‖ 2 2 + α , 0 ) {\displaystyle L=\sum _{i=1}^{m}\max {\Big (}\Vert f(A^{(i)})-f(P^{(i)})\Vert _{2}^{2}-\Vert f(A^{(i)})-f(N^{(i)})\Vert _{2}^{2}+\alpha ,0{\Big )}} == Intuition == A baseline for understanding the effectiveness of triplet loss is the contrastive loss, which operates on pairs of samples (rather than triplets). Training with the contrastive loss pulls embeddings of similar pairs closer together, and pushes dissimilar pairs apart. Its pairwise approach is greedy, as it considers each pair in isolation. Triplet loss innovates by considering relative distances. Its goal is that the embedding of an anchor (query) point be closer to positive points than to negative points (also accounting for the margin). It does not try to further optimize the distances once this requirement is met. This is approximated by simultaneously considering two pairs (anchor-positive and anchor-negative), rather than each pair in isolation. == Triplet "mining" == One crucial implementation detail when training with triplet loss is triplet "mining", which focuses on the smart selection of triplets for optimization. This process adds an additional layer of complexity compared to contrastive loss. A naive approach to preparing training data for the triplet loss involves randomly selecting triplets from the dataset. In general, the set of valid triplets of the form ( A ( i ) , P ( i ) , N ( i ) ) {\displaystyle (A^{(i)},P^{(i)},N^{(i)})} is very large. To speed-up training convergence, it is essential to focus on challenging triplets. In the FaceNet paper, several options were explored, eventually arriving at the following. For each anchor-positive pair, the algorithm considers only semi-hard negatives. These are negatives that violate the triplet requirement (i.e, are "hard"), but lie farther from the anchor than the positive (not too hard). Restated, for each A ( i ) {\displaystyle A^{(i)}} and P ( i ) {\displaystyle P^{(i)}} , they seek N ( i ) {\displaystyle N^{(i)}} such that: The rationale for this design choice is heuristic. It may appear puzzling that the mining process neglects "very hard" negatives (i.e., closer to the anchor than the positive). Experiments conducted by the FaceNet designers found that this often leads to a convergence to degenerate local minima. Triplet mining is performed at each training step, from within the sample points contained in the training batch (this is known as online mining), after embeddings were computed for all points in the batch. While ideally the entire dataset could be used, this is impractical in general. To support a large search space for triplets, the FaceNet authors used very large batches (1800 samples). Batches are constructed by selecting a large number of same-category sample points (40), and randomly selected negatives for them. == Extensions == Triplet loss has been extended to simultaneously maintain a series of distance orders by optimizing a continuous relevance degree with a chain (i.e., ladder) of distance inequalities. This leads to the Ladder Loss, which has been demonstrated to offer performance enhancements of visual-semantic embedding in learning to rank tasks. In Natural Language Processing, triplet loss is one of the loss functions considered for BERT fine-tuning in the SBERT architecture. Other extensions involve specifying multiple negatives (multiple negatives ranking loss).

  Read more →
• 

  Google Messages

  Google Messages (formerly known as Messenger, Android Messages, and Messages by Google) is a text messaging software application developed by Google for its Android and Wear OS mobile operating systems. It is also available as a web app. Google's official universal messaging platform for the Android ecosystem, Messages employs SMS, MMS, and Rich Communication Services (RCS). Starting in 2023, Google has RCS activated by default on participating Android devices, similar to the implementation of iMessage on Apple devices. Samsung Messages will be discontinued on July 6th 2026, with Samsung transitioning users to Google Messages as the default messaging application. == History == The original code for Android SMS messaging was released in 2009 integrated into the operating system. It was released as a standalone application independent of Android with the release of Android 5.0 Lollipop in 2014, replacing Google Hangouts as the default SMS app on Google's Nexus line of phones. In 2018, Messages adopted RCS messages and evolved to send larger data files, sync with other apps, and even create mass messages. This was in preparation for when Google launched Messages for web. In December 2019, Google began to introduce support for Rich Communication Services (RCS) messaging via an RCS service hosted by Google, referred to in the user interface as "chat features". This was followed by a wider global rollout throughout 2020. The app surpassed 1 billion installs in April 2020, doubling its number of installs in less than a year. Initially, RCS did not support end-to-end encryption. In June 2021, Google introduced end-to-end encryption in Messages by default using the Signal Protocol, for all one-to-one RCS-based conversations, for all RCS group chats in December 2022 for beta users, and for all RCS users by August 2023, as well as enabling RCS for all users by default to encourage encryption. In July 2023, Google announced it would build the Message Layer Security (MLS) end-to-end encryption protocol into Google Messages. Beginning with the Samsung Galaxy S21, Messages replaces Samsung's in-house Messages app as the default text messaging app for One UI for some regions and carriers. In April 2021, the app began to receive UI modifications on Samsung devices to follow aspects of One UI, including pushing the top of the message list towards the middle of the screen to improve ergonomics. In February 2023, Google began to replace references to "chat features" in the Messages user interface with "RCS". In August 2023, Google announced that Messages will use RCS by default for all users unless they opt out, to allow them to benefit from secure messaging. In December 2023, with the arrival of several new features, the app was renamed "Google Messages". In July 2024, Samsung announced it would no longer pre-install Samsung Messages on its Galaxy devices in some regions, starting with the Galaxy Z Fold 6 and Flip, favoring Google Messages instead. In April 2026, Samsung announced that Samsung Messages would be discontinued in July 2026. It encouraged users to switch to Google Messages. == Features == Some of the most important features in Google Messages are: Send instant text and voice messages in 1:1 or group chat conversations over mobile data and Wi-Fi, via Android, Wear OS or the web. End-to-end encryption for RCS chats. Typing, sent, delivered and read status Reply and react to specific messages Share files and high-resolution photos Voice message transcriptions Schedule messages In-app reminders for birthdays and messages you didn't respond to after some time with Nudges Tight integration with the Google ecosystem, e.g. Google Calendar, Meet, Maps, YouTube, Photos, Contacts, Assistant, Search, Safe Browsing etc. Web interface: Users can visit https://messages.google.com/web and either sign in with their Google account or scan the QR code that is shown with their smartphone to access a limited web version of the app that allows them to send and receive messages, provided the smartphone remains connected. Phone number recognition: The app shows the country and province of the caller. Additionally, it can show the company's name or a warning for spam calls if the number is registered in a data base. Access to the Gemini chatbot on select Pixel, Galaxy and Android devices.

  Read more →
• 

  Multidimensional analysis

  In statistics, econometrics and related fields, multidimensional analysis (MDA) is a data analysis process that groups data into two categories: data dimensions and measurements. For example, a data set consisting of the number of wins for a single football team at each of several years is a single-dimensional (in this case, longitudinal) data set. A data set consisting of the number of wins for several football teams in a single year is also a single-dimensional (in this case, cross-sectional) data set. A data set consisting of the number of wins for several football teams over several years is a two-dimensional data set. == Higher dimensions == In many disciplines, two-dimensional data sets are also called panel data. While, strictly speaking, two- and higher-dimensional data sets are "multi-dimensional", the term "multidimensional" tends to be applied only to data sets with three or more dimensions. For example, some forecast data sets provide forecasts for multiple target periods, conducted by multiple forecasters, and made at multiple horizons. The three dimensions provide more information than can be gleaned from two-dimensional panel data sets. == Software == Computer software for MDA include Online analytical processing (OLAP) for data in relational databases, pivot tables for data in spreadsheets, and Array DBMSs for general multi-dimensional data (such as raster data) in science, engineering, and business.

  Read more →
• 

  Correspondence analysis

  Correspondence analysis (CA) is a multivariate statistical technique proposed by Herman Otto Hartley (Hirschfeld) and later developed by Jean-Paul Benzécri. It is conceptually similar to principal component analysis, but applies to categorical rather than continuous data. In a manner similar to principal component analysis, it provides a means of displaying or summarising a set of data in two-dimensional graphical form. Its aim is to display in a biplot any structure hidden in the multivariate setting of the data table. As such it is a technique from the field of multivariate ordination. Since the variant of CA described here can be applied either with a focus on the rows or on the columns it should in fact be called simple (symmetric) correspondence analysis. It is traditionally applied to the contingency table of a pair of nominal variables where each cell contains either a count or a zero value. If more than two categorical variables are to be summarized, a variant called multiple correspondence analysis should be chosen instead. CA may also be applied to binary data given the presence/absence coding represents simplified count data i.e. a 1 describes a positive count and 0 stands for a count of zero. Depending on the scores used CA preserves the chi-square distance between either the rows or the columns of the table. Because CA is a descriptive technique, it can be applied to tables regardless of a significant chi-squared test. Although the χ 2 {\displaystyle \chi ^{2}} statistic used in inferential statistics and the chi-square distance are computationally related they should not be confused since the latter works as a multivariate statistical distance measure in CA while the χ 2 {\displaystyle \chi ^{2}} statistic is in fact a scalar not a metric. == Details == Like principal components analysis, correspondence analysis creates orthogonal components (or axes) and, for each item in a table i.e. for each row, a set of scores (sometimes called factor scores, see Factor analysis). Correspondence analysis is performed on the data table, conceived as matrix C of size m × n where m is the number of rows and n is the number of columns. In the following mathematical description of the method capital letters in italics refer to a matrix while letters in italics refer to vectors. Understanding the following computations requires knowledge of matrix algebra. === Preprocessing === Before proceeding to the central computational step of the algorithm, the values in matrix C have to be transformed. First compute a set of weights for the columns and the rows (sometimes called masses), where row and column weights are given by the row and column vectors, respectively: w m = 1 n C C 1 , w n = 1 n C 1 T C . {\displaystyle w_{m}={\frac {1}{n_{C}}}C\mathbf {1} ,\quad w_{n}={\frac {1}{n_{C}}}\mathbf {1} ^{T}C.} Here n C = ∑ i = 1 n ∑ j = 1 m C i j {\displaystyle n_{C}=\sum _{i=1}^{n}\sum _{j=1}^{m}C_{ij}} is the sum of all cell values in matrix C, or short the sum of C, and 1 {\displaystyle \mathbf {1} } is a column vector of ones with the appropriate dimension. Put in simple words, w m {\displaystyle w_{m}} is just a vector whose elements are the row sums of C divided by the sum of C, and w n {\displaystyle w_{n}} is a vector whose elements are the column sums of C divided by the sum of C. The weights are transformed into diagonal matrices W m = diag ⁡ ( 1 / w m ) {\displaystyle W_{m}=\operatorname {diag} (1/{\sqrt {w_{m}}})} and W n = diag ⁡ ( 1 / w n ) {\displaystyle W_{n}=\operatorname {diag} (1/{\sqrt {w_{n}}})} where the diagonal elements of W n {\displaystyle W_{n}} are 1 / w n {\displaystyle 1/{\sqrt {w_{n}}}} and those of W m {\displaystyle W_{m}} are 1 / w m {\displaystyle 1/{\sqrt {w_{m}}}} respectively i.e. the vector elements are the inverses of the square roots of the masses. The off-diagonal elements are all 0. Next, compute matrix P {\displaystyle P} by dividing C {\displaystyle C} by its sum P = 1 n C C . {\displaystyle P={\frac {1}{n_{C}}}C.} In simple words, Matrix P {\displaystyle P} is just the data matrix (contingency table or binary table) transformed into portions i.e. each cell value is just the cell portion of the sum of the whole table. Finally, compute matrix S {\displaystyle S} , sometimes called the matrix of standardized residuals, by matrix multiplication as S = W m ( P − w m w n ) W n {\displaystyle S=W_{m}(P-w_{m}w_{n})W_{n}} Note, the vectors w m {\displaystyle w_{m}} and w n {\displaystyle w_{n}} are combined in an outer product resulting in a matrix of the same dimensions as P {\displaystyle P} . In words the formula reads: matrix outer ⁡ ( w m , w n ) {\displaystyle \operatorname {outer} (w_{m},w_{n})} is subtracted from matrix P {\displaystyle P} and the resulting matrix is scaled (weighted) by the diagonal matrices W m {\displaystyle W_{m}} and W n {\displaystyle W_{n}} . Multiplying the resulting matrix by the diagonal matrices is equivalent to multiply the i-th row (or column) of it by the i-th element of the diagonal of W m {\displaystyle W_{m}} or W n {\displaystyle W_{n}} , respectively. === Interpretation of preprocessing === The vectors w m {\displaystyle w_{m}} and w n {\displaystyle w_{n}} are the row and column masses or the marginal probabilities for the rows and columns, respectively. Subtracting matrix outer ⁡ ( w m , w n ) {\displaystyle \operatorname {outer} (w_{m},w_{n})} from matrix P {\displaystyle P} is the matrix algebra version of double centering the data. Multiplying this difference by the diagonal weighting matrices results in a matrix containing weighted deviations from the origin of a vector space. This origin is defined by matrix outer ⁡ ( w m , w n ) {\displaystyle \operatorname {outer} (w_{m},w_{n})} . In fact matrix outer ⁡ ( w m , w n ) {\displaystyle \operatorname {outer} (w_{m},w_{n})} is identical with the matrix of expected frequencies in the chi-squared test. Therefore S {\displaystyle S} is computationally related to the independence model used in that test. But since CA is not an inferential method the term independence model is inappropriate here. === Orthogonal components === The table S {\displaystyle S} is then decomposed by a singular value decomposition as S = U Σ V ∗ {\displaystyle S=U\Sigma V^{}\,} where U {\displaystyle U} and V {\displaystyle V} are the left and right singular vectors of S {\displaystyle S} and Σ {\displaystyle \Sigma } is a square diagonal matrix with the singular values σ i {\displaystyle \sigma _{i}} of S {\displaystyle S} on the diagonal. Σ {\displaystyle \Sigma } is of dimension p ≤ ( min ( m , n ) − 1 ) {\displaystyle p\leq (\min(m,n)-1)} hence U {\displaystyle U} is of dimension m×p and V {\displaystyle V} is of n×p. As orthonormal vectors U {\displaystyle U} and V {\displaystyle V} fulfill U ∗ U = V ∗ V = I {\displaystyle U^{}U=V^{}V=I} . In other words, the multivariate information that is contained in C {\displaystyle C} as well as in S {\displaystyle S} is now distributed across two (coordinate) matrices U {\displaystyle U} and V {\displaystyle V} and a diagonal (scaling) matrix Σ {\displaystyle \Sigma } . The vector space defined by them has as number of dimensions p, that is the smaller of the two values, number of rows and number of columns, minus 1. === Inertia === While a principal component analysis may be said to decompose the (co)variance, and hence its measure of success is the amount of (co-)variance covered by the first few PCA axes - measured in eigenvalue -, a CA works with a weighted (co-)variance which is called inertia. The sum of the squared singular values is the total inertia I {\displaystyle \mathrm {I} } of the data table, computed as I = ∑ i = 1 p σ i 2 . {\displaystyle \mathrm {I} =\sum _{i=1}^{p}\sigma _{i}^{2}.} The total inertia I {\displaystyle \mathrm {I} } of the data table can also computed directly from S {\displaystyle S} as I = ∑ i = 1 n ∑ j = 1 m s i j 2 . {\displaystyle \mathrm {I} =\sum _{i=1}^{n}\sum _{j=1}^{m}s_{ij}^{2}.} The amount of inertia covered by the i-th set of singular vectors is ι i {\displaystyle \iota _{i}} , the principal inertia. The higher the portion of inertia covered by the first few singular vectors i.e. the larger the sum of the principal inertiae in comparison to the total inertia, the more successful a CA is. Therefore, all principal inertia values are expressed as portion ϵ i {\displaystyle \epsilon _{i}} of the total inertia ϵ i = σ i 2 / ∑ i = 1 p σ i 2 {\displaystyle \epsilon _{i}=\sigma _{i}^{2}/\sum _{i=1}^{p}\sigma _{i}^{2}} and are presented in the form of a scree plot. In fact a scree plot is just a bar plot of all principal inertia portions ϵ i {\displaystyle \epsilon _{i}} . === Coordinates === To transform the singular vectors to coordinates which preserve the chi-square distances between rows or columns an additional weighting step is necessary. The resulting coordinates are called principal coordinates in CA text books. If principal coordinates are used for

  Read more →
• 

  Jubatus

  Jubatus is an open-source online machine learning and distributed computing framework developed at Nippon Telegraph and Telephone and Preferred Infrastructure. Its features include classification, recommendation, regression, anomaly detection and graph mining. It supports many client languages, including C++, Java, Ruby and Python. It uses Iterative Parameter Mixture for distributed machine learning. == Notable Features == Jubatus supports: Multi-classification algorithms: Perceptron Passive Aggressive Confidence Weighted Adaptive Regularization of Weight Vectors Normal Herd Recommendation algorithms using: Inverted index Minhash Locality-sensitive hashing Regression algorithms: Passive Aggressive feature extraction method for natural language: n-gram Text segmentation

  Read more →
• 

  Space-based data center

  Space-based data centers or orbital AI infrastructure are proposed concepts to build AI data centers in the sun-synchronous orbit or other orbits utilizing space-based solar power. Electric power has become the main bottleneck for terrestrial AI infrastructure. Space-based edge computing has historical roots in military architectures designed to bypass the latency of ground-based targeting networks. In the 1980s, the Strategic Defense Initiative's Brilliant Pebbles program first envisioned autonomous on-orbit data processing for missile defense. In 2019, the Space Development Agency (SDA) began to revive this decentralized approach through its Proliferated Warfighter Space Architecture (PWSA). This ambitious "sensor-to-shooter" infrastructure is treated as a prerequisite for the modern Golden Dome program, which would rely on space-based data processing to continuously track targets. == History == Early thinking about space-based computing infrastructure grew out of mid-20th-century visions for large orbital industrial systems, most notably proposals for space-based solar power, which were popularized in both technical literature and science writing by figures such as Isaac Asimov in the 1940s. These ideas emphasized exploiting the vacuum, continuous solar energy, and thermal characteristics of space to support power-intensive activities that would be difficult or inefficient on Earth. In the 21st century, advances in small satellites, reusable launch vehicles, and high-performance computing revived interest in space-based data centers, with governments and private companies exploring orbital or near-space platforms for edge computing, secure data handling, and low-latency processing of Earth-observation data. In September 2024, Y Combinator-backed Starcloud released a white paper detailing plans to build multiple gigawatts of AI compute in orbit. It was the first widely cited proposal to actually start building large orbital data centers. In 2025, Starcloud deployed an NVIDIA H100-class system and became the first company to train an LLM in space and run a version of Google Gemini in space. In March 2025, Lonestar deployed a data backup machine on the surface of the moon. In early January 2026, a team from the University of Pennsylvania presented a tether-based architecture for orbital data centers at the AIAA SciTech conference. The design relied on gravity gradient tension and solar-pressure-based passive attitude stabilization to minimize the mass of MW-scale orbital data centers. In January 2026, SpaceX filed plans with the Federal Communications Commission (FCC) for millions of satellites, leveraging reusable launches and Starlink integration to extend cloud and AI computing into orbit. Around the same time, Blue Origin announced the TeraWave constellation of about 5,400 satellites, designed to provide high‑throughput networking for data centers, enterprise, and government customers. Meanwhile, China announced a 200,000‑satellite constellation, focusing on state coordination, data sovereignty, and in-orbit processing for secure, time-critical applications. In February 2026, Starcloud submitted a proposal to the FCC for a constellation of up to 88,000 satellites for orbital data centers. In March, it announced intentions to be the first to mine Bitcoin in space, flying bitcoin mining ASICs on its second satellite, Starcloud-2. In May 2026, Edge Aerospace was awarded a contract by the European Space Agency under its Space Cloud program to study use cases, architectures and implementation roadmap for orbital data centers. == Feasibility == In October 2025, Nature Electronics published a study led by a research group at Nanyang Technological University on the development of carbon-neutral data centres in space. In November 2025, Google published a feasibility study on space-based data centers. The authors argued that if launch costs to low earth orbit reached US$200/kg, the launch cost for data center satellites could be cost effective relative to current energy costs for ground-based data centers. They project this may occur around 2035 if SpaceX's Starship project scales to 180 launches/year by then. == Advantages == Some sun-synchronous orbit (SSO) planes have constant sunlight in the dawn/dusk which could provide continuous solar energy. SSO is a limited resource and proper management and sharing of it is required. Solar irradiance is 36% higher in Earth orbit than on the surface No Earth weather storms or clouds, however more exposed to Solar storms. No property tax or land-use regulation. Saves space for other land use. Ample space for scalability. Won't strain the power grid. Direct access to power source without additional infrastructure. == Disadvantages == The deployment of space-based data centers raises several technical, economic, and environmental concerns. Existing launch costs are substantial and remains main cost of space infrastructure deployment Cooling is limited to heat dissipation through radiation only, which made in inefficient in comparison to convection in terrestrial data centers Space infrastructure must be designed to survive launch and to work under environment conditions of radiation, wide range of temperatures, in vacuum and in microgravity In-space assembly is on early development stage to enable deployment of mega-structures Megastructures are particularly exposed to orbital debris Solar arrays efficiency decrease 0.5% to 0.8% per year due to exposure of ultraviolet rays, space weather and orbital thermal cycles Hardware is designed for limited lifespan. Maintenance and repair in space (known as On-Orbit Servicing (OOS)) is still on early stage of practical implementation. Disposable data centre: technology obsolescence of AI data centre being a concern and difficult maintenance in space imply the single-use purpose of those space data centres. To extend lifetime, space infrastructure will require either refueling or orbit rasie by the servicer, which is going to increase its operational costs The environmental impact on Earth has its own challenges: The environmental impact of launches need to be addressed. Deployment consumes Earth resources that cannot be recovered or recycled. Computers require lots of resources, some of which are strategic. Recycling e-waste is already a challenge on Earth and extremely unlikely in space. Space debris (orbit pollution) is another sustainability challenge for space: Orbits are, like any resources, a limited physical and electromagnetic resource and available for all mankind. The accumulation of satellites on a particular orbit reduces the use of space for other purposes. A consequence of the increase of satellite in orbit is a higher risk of the runaway of space debris (see Kessler syndrome). This means some orbits could become unusable. Latency and bandwidth are constrained in space, and consumes limited electromagnetic resources. Satellite flares could inhibit ground-based and space-based observational astronomy. == Size and power generated == It would take ~1 square mile solar array in earth orbit to produce 1 gigawatt of power at 30% cell efficiency. == Companies pursuing space-based AI infrastructure == Blue Origin Cowboy Space Corporation (formerly Aetherflux) Edge Aerospace Google – Project Suncatcher Nvidia OpenAI SpaceX Starcloud

  Read more →
• 

  Multiple discriminant analysis

  Multiple Discriminant Analysis (MDA) is a multivariate dimensionality reduction technique. It has been used to predict signals as diverse as neural memory traces and corporate failure. MDA is not directly used to perform classification. It merely supports classification by yielding a compressed signal amenable to classification. The method described in Duda et al. (2001) §3.8.3 projects the multivariate signal down to an M−1 dimensional space where M is the number of categories. MDA is useful because most classifiers are strongly affected by the curse of dimensionality. In other words, when signals are represented in very-high-dimensional spaces, the classifier's performance is catastrophically impaired by the overfitting problem. This problem is reduced by compressing the signal down to a lower-dimensional space as MDA does. MDA has been used to reveal neural codes.

  Read more →
• 

  Vapnik–Chervonenkis dimension

  In Vapnik–Chervonenkis theory, the Vapnik–Chervonenkis (VC) dimension is a measure of the size (capacity, complexity, expressive power, richness, or flexibility) of a class of sets. The notion can be extended to classes of binary functions. It is defined as the cardinality of the largest set of points that the function class can shatter—that is, for which all possible binary labelings can be realized by some function in the class. It was originally defined by Vladimir Vapnik and Alexey Chervonenkis. Informally, the capacity of a classification model is related to how complicated it can be. For example, consider the thresholding of a high-degree polynomial: if the polynomial evaluates above zero, that point is classified as positive, otherwise as negative. A high-degree polynomial can be wiggly, so that it can fit a given set of training points well. Such a polynomial has a high capacity. A much simpler alternative is to threshold a linear function. This function may not fit the training set well, because it has a low capacity. This notion of capacity is made rigorous below. == Definitions == === VC dimension of a set-family === Let C = { C } C ∈ C {\displaystyle {\mathcal {C}}=\{C\}_{C\in {\mathcal {C}}}} be a family of sets (also called set family, collection of sets or set of sets) and X {\displaystyle X} a set. Their intersection is defined as the following set family: C ∩ X := { C ∩ X ∣ C ∈ C } . {\displaystyle {\mathcal {C}}\cap X:=\{C\cap X\mid C\in {\mathcal {C}}\}.} Here typically X {\displaystyle X} and each C ∈ C {\displaystyle C\in {\mathcal {C}}} are subsets of a big "universe" of possibilities U {\displaystyle U} where intersection takes place. We say that a set X {\displaystyle X} is shattered by C {\displaystyle {\mathcal {C}}} if P ( X ) = C ∩ X {\displaystyle {\mathcal {P}}(X)={\mathcal {C}}\cap X} i.e. the set of intersections contains (hence is equal to) all the subsets of X {\displaystyle X} . For finite sets X {\displaystyle X} this is equivalent to | C ∩ X | = 2 | X | . {\displaystyle |{\mathcal {C}}\cap X|=2^{|X|}.} The VC dimension D {\displaystyle D} of C {\displaystyle {\mathcal {C}}} is the cardinality of the largest set that is shattered by C {\displaystyle {\mathcal {C}}} . If arbitrarily large sets can be shattered, the VC dimension of C {\displaystyle {\mathcal {C}}} is ∞ {\displaystyle \infty } . === VC dimension of a classification model === A binary classification model f {\displaystyle f} with some parameter vector θ {\displaystyle \theta } is said to shatter a set of generally positioned data points ( x 1 , x 2 , … , x n ) {\displaystyle (x_{1},x_{2},\ldots ,x_{n})} if, for every assignment of labels to those points, there exists a θ {\displaystyle \theta } such that the model f {\displaystyle f} makes no errors when evaluating that set of data points. The VC dimension of a model f {\displaystyle f} is the maximum number of points that can be arranged so that f {\displaystyle f} shatters them. More formally, it is the maximum cardinal D {\displaystyle D} such that there exists a generally positioned data point set of cardinality D {\displaystyle D} that can be shattered by f {\displaystyle f} . == Examples == f {\displaystyle f} is a constant classifier (with no parameters); Its VC dimension is 0 since it cannot shatter even a single point. In general, the VC dimension of a finite classification model, which can return at most 2 d {\displaystyle 2^{d}} different classifiers, is at most d {\displaystyle d} (this is an upper bound on the VC dimension; the Sauer–Shelah lemma gives a lower bound on the dimension). f {\displaystyle f} is a single-parametric threshold classifier on real numbers; i.e., for a certain threshold θ {\displaystyle \theta } , the classifier f θ {\displaystyle f_{\theta }} returns 1 if the input number is larger than θ {\displaystyle \theta } and 0 otherwise. The VC dimension of f {\displaystyle f} is 1 because: (a) It can shatter a single point. For every point x {\displaystyle x} , a classifier f θ {\displaystyle f_{\theta }} labels it as 0 if θ > x {\displaystyle \theta >x} and labels it as 1 if θ < x {\displaystyle \theta x + 2 {\displaystyle \theta >x+2} , as (1,0) if θ ∈ [ x − 4 , x − 2 ) {\displaystyle \theta \in [x-4,x-2)} , as (1,1) if θ ∈ [ x − 2 , x ] {\displaystyle \theta \in [x-2,x]} , and as (0,1) if θ ∈ ( x , x + 2 ] {\displaystyle \theta \in (x,x+2]} . (b) It cannot shatter any set of three points. For every set of three numbers, if the smallest and the largest are labeled 1, then the middle one must also be labeled 1, so not all labelings are possible. f {\displaystyle f} is a straight line as a classification model on points in a two-dimensional plane (this is the model used by a perceptron). The line should separate positive data points from negative data points. There exist sets of 3 points that can indeed be shattered using this model (any 3 points that are not collinear can be shattered). However, no set of 4 points can be shattered: by Radon's theorem, any four points can be partitioned into two subsets with intersecting convex hulls, so it is not possible to separate one of these two subsets from the other. Thus, the VC dimension of this particular classifier is 3. It is important to remember that while one can choose any arrangement of points, the arrangement of those points cannot change when attempting to shatter for some label assignment. Note, only 3 of the 23 = 8 possible label assignments are shown for the three points. f {\displaystyle f} is a single-parametric sine classifier, i.e., for a certain parameter θ {\displaystyle \theta } , the classifier f θ {\displaystyle f_{\theta }} returns 1 if the input number x {\displaystyle x} has sin ⁡ ( θ x ) > 0 {\displaystyle \sin(\theta x)>0} and 0 otherwise. The VC dimension of f {\displaystyle f} is infinite, since it can shatter any finite subset of the set { 2 − m ∣ m ∈ N } {\displaystyle \{2^{-m}\mid m\in \mathbb {N} \}} . == Uses == === In statistical learning theory === The VC dimension can predict a probabilistic upper bound on the test error of a classification model. Vapnik proved that the probability of the test error (i.e., risk with 0–1 loss function) distancing from an upper bound (on data that is drawn i.i.d. from the same distribution as the training set) is given by: Pr ( test error ⩽ training error + 1 N [ D ( log ⁡ ( 2 N D ) + 1 ) − log ⁡ ( η 4 ) ] ) = 1 − η , {\displaystyle \Pr \left({\text{test error}}\leqslant {\text{training error}}+{\sqrt {{\frac {1}{N}}\left[D\left(\log \left({\tfrac {2N}{D}}\right)+1\right)-\log \left({\tfrac {\eta }{4}}\right)\right]}}\,\right)=1-\eta ,} where D {\displaystyle D} is the VC dimension of the classification model, 0 < η ⩽ 1 {\displaystyle 0<\eta \leqslant 1} , and N {\displaystyle N} is the size of the training set (restriction: this formula is valid when D ≪ N {\displaystyle D\ll N} . When D {\displaystyle D} is larger, the test-error may be much higher than the training-error. This is due to overfitting). The VC dimension also appears in sample-complexity bounds. A space of binary functions with VC dimension D {\displaystyle D} can be learned with: N = Θ ( D + ln ⁡ 1 δ ε 2 ) {\displaystyle N=\Theta \left({\frac {D+\ln {1 \over \delta }}{\varepsilon ^{2}}}\right)} samples, where ε {\displaystyle \varepsilon } is the learning error and δ {\displaystyle \delta } is the failure probability. Thus, the sample-complexity is a linear function of the VC dimension of the hypothesis space. === In computational geometry === The VC dimension is one of the critical parameters in the size of ε-nets, which determines the complexity of approximation algorithms based on them; range sets without finite VC dimension may not have finite ε-nets at all. == Bounds == The VC dimension of the dual set-family of C {\displaystyle {\mathcal {C}}} is strictly less than 2 vc ⁡ ( C ) + 1 {\displaystyle 2^{\operatorname {vc} ({\mathcal {C}})+1}} , and this is best possible. The VC dimension of a finite set-family C {\displaystyle {\mathcal {C}}} is at most log 2 ⁡ | C | {\displaystyle \log _{2}|{\mathcal {C}}|} . This is because | C ∩ X | ≤ | X | {\displaystyle |{\mathcal {C}}\cap X|\leq |X|} by definition. Given a set-fa

  Read more →