AI Content Label

AI Content Label — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

PCVC Speech Dataset

The PCVC (Persian Consonant Vowel Combination) Speech Dataset is a Modern Persian speech corpus for speech recognition and also speaker recognition. The dataset contains sound samples of Modern Persian combination of vowel and consonant phonemes from different speakers. Every sound sample contains just one consonant and one vowel So it is somehow labeled in phoneme level. This dataset consists of 23 Persian consonants and 6 vowels. The sound samples are all possible combinations of vowels and consonants (138 samples for each speaker). The sample rate of all speech samples is 48000 which means there are 48000 sound samples in every 1 second. Every sound sample starts with consonant then continues with vowel. In each sample, in average, 0.5 second of each sample is speech and the rest is silence. Each sound sample ends with silence. All of sound samples are denoised with "Adaptive noise reduction" algorithm. Compared to Farsdat speech dataset and Persian speech corpus it is more easy to use because it is prepared in .mat data files. Also it is more based on phoneme based separation and all samples are denoised. == Contents == The corpus is downloadable from its Kaggle web page, and contains the following: .mat data files of sound samples in a 23630000 matrix, in which 23 is number of consonants, 6 is the number of vowels and 30000 is the length of sound sample.
Read more →
The Big Book of Social Media

The Big Book of Social Media: Case Studies, Stories, Perspectives, released in November 2010 by Yorkshire Publishing, is a compilation of non-fiction articles and chapters written by social media experts in their respective fields and edited by Robert Fine, organizer of the Cool Social Conferences World Tour and founder of Cool Blue Press, with a foreword by Sam Feist, political director for CNN. == Synopsis == The publisher, on its site, summed up the book as, "Not business. Not marketing. This is an idea book." And an article in Business Insider described the book as bringing "the social back into social media." == Contributors == Contributing authors include: Alan Rosenblatt, Alane Anderson, Alecia Dantico, Alex Priest, Alfred Naranjo, Becky Carroll, Carri Bugbee, Cathy Scott, Colleen Crinklaw, Constantine Markides, Cordelia Mendoza, Craig Kanalley, Dave Ingland, Eric Andersen, Eric Brown, Gary Zukowski, Haja Rasambainarivo, Jennifer Kaplan, Kari Quaas, Lauri Stevens, Lev Ekster, Mark Stelzner, Matthew Felling, Matt Stewart, Melani Gordon, Michael Bourne, Michele Mattia, Mirna Bard, Neal Schaffer, Nic Evans, Noaf Ereiqat, Pek Pongpaet, Perri Gorman, Phil Baumann, Regina Holliday, Rory Cooper, Sam Feist, Shashi Bellamkonda, Shrinath Navghane, Steve Pratt, Ted Nguyen, Todd Schnick, Tonia Ries, Wayne Burke, as well as Robert Fine. In December 2011, some of the contributing authors organized "Tweet It Forward," a holiday charity fundraiser, with net proceeds benefitting the Food Bank for New York City. == Reception == Reviewer Mike Brown wrote on the Brainzooming blog that the book goes "beyond the valueless chatter out there; it provides solid discussions of real-life social media strategy implementations that have truly integrated organizational objectives and delivered real metrics." And Tech Cocktail wrote it in its review, "Through a collection of entertaining anecdotes and insightful marketing agendas, one sees what social media is truly all about and how it is revolutionizing the communications industry." In 2011, at the SXSW social media festival in Austin, Texas, Fine launched Cool Blue Press and reintroduced The Big Book of Social Media, with plans, he told a reporter from the Washington Examiner, for other new media books and publishing projects, including The Social Media Monthly magazine. The book was reviewed in 2012 by SAGE Publications for its Journalism and Mass Communication Educator magazine. It is also cited in several books and journals. === Awards === The book was a winner in the 4th Annual Reader's Choice "Small Business Book Awards" for 2011. Windmill Networking named it the Top 15 recommended social media books of 2010.
Read more →
Digital inclusion

Digital inclusion involves the activities necessary to ensure equitable access to and use of information and communications technologies for participation in social and economic life including for education, social services, health, social, and community participation. Digital inclusion includes access to affordable broadband Internet services, Internet-enabled devices, access to digital literacy training, quality technical support, and applications and online content designed to enable and encourage self-sufficiency, participation, and collaboration. Related concepts include digital divide, digital exclusion and digital inequality, however digital inclusion focuses more on the strategies, policies, and programs required to address the digital divide. As many services have moved online and with the increasing use of telehealth to deliver primary care, particularly during the COVID-19 pandemic in 2020, digital inclusion, including digital literacy and internet access is increasingly regarded as a social determinant of health. Accessibility, relevance, and impact have been identified as essential elements of digital inclusion as it pertains to health information systems. "Digital inclusion is broadly defined as different strategies designed to ensure that all people have equal access, opportunities and skills to benefit from digital technologies and systems" (ITU, 2019, as cited in Carmi and Yates, 2020). Since 2020, there have been many technology companies that have begun implementing different features or roles within their companies to support breaking down the digital divide. For example, HP has announced the digital divide accelerator. This accelerator will support nonprofits in Greece, Indonesia, Nigeria, and Spain. The goal for this role is to help equip children and other people within the community to understand the skills needed to become a part of the digital community. == Background == With the increasing use of computers and the Internet in the 1990s and early 2000s concerns rose around digital equality, however this primarily focused on the physical access to technology. This gave rise to the concept of the digital divide which was originally developed to describe the growing disparity in Internet access between rural and urban areas of the United States of America. This gradually expanded to considerations of digital access between countries in what is termed the global digital divide, which mirrors many of the disparities seen within countries but on an international scale. However, with the adoption of digital technologies across most sectors of society, and the increasing diversity of technologies and programs, access and use of ICT became more complex and essential for many aspects of daily life. This led to new terminology and a second wave of research on digital inequality which has been identified as the (1) usage gap, (2) second level digital divide, (3) emerging digital differentiation, and (4) digital inclusion. == Strategies for digital inclusion == A review of the literature in 2019 found that while physical access to digital technologies and the internet continues to be a barrier to digital inclusion, digital ability and attitude were also potential barriers. Key strategies identified for improving digital inclusion are social support, direct user experience and collaborative learning/design. Education is a key aspect of digital inclusion as digital technologies have become a key means of engaging with all levels of the education system, requiring levels of digital competence for successful engagement with the curriculum. In addition lifelong learning is required as technologies, services and systems are changing constantly. Public libraries and community service providers play a key role in supporting digital inclusion through access to computers, internet connection and expertise and training. Designing for digital inclusion may also help with poor written literacy, which remains a barrier for 10% of the world's population. UNESCO has developed Guidelines for designing digital technologies in ways that could assist those who are illiterate. == Indigenous digital inclusion == Digital inclusion is a critical issue for many Indigenous communities across the globe, many of whom lack access to adequate resources. The Australian Government has set a National Closing the Gap target for Aboriginal and Torres Strait Islander people to have equal levels of digital inclusion by 2026. Many people on tribal land and in Native Hawaiian land struggle with the technology gap. The Native Entities Capacity and Planning Grant Program has $45.3 million available to help address these challenges and empower Indian Tribes, Alaska Native entities, and Native Hawaiian organizations. Some of the impacts so far are in the education and workforce development and healthcare access through telehealth.[13] == Measuring digital inclusion == The Australian Digital Inclusion Index (ADII) is a research project which has been tracking digital inclusion throughout Australia since 2016. It uses survey data to measure digital inclusion across three dimensions of access, affordability and digital ability. == The Future of Digital Inclusion == On February 16, 2021, a global dialogue within the United Nations (UN) took a look at the future of digital inclusion. Through the adoption of the 2030 UN Agenda for Sustainable Development, Member States made a commitment. They pledged to "leave no one behind." By 2030, the UN's goal is to close the digital divide by providing access to the Internet and mobile technologies for all nations and peoples and for all segments of society. The UN sees the crisis of too many people in our global society still living unconnected and how the digital divide remains a challenge that must be addressed. == Gaming == The Xbox Adaptive Controller is a groundbreaking example of digital inclusion, designed to make gaming more accessible to people with limited mobility. Developed by Microsoft, it features large programmable buttons and ports that connect to a wide range of external devices like switches, joysticks, and mounts, allowing users to customize their gaming experience based on their unique needs. By removing traditional physical barriers to gameplay, the Xbox Adaptive Controller empowers more people to participate in digital entertainment, promotes equal access to technology, and fosters a more inclusive gaming community. == Digital inclusion advocacy groups == Australian Digital Inclusion Alliance National Digital Inclusion Alliance (US)
Read more →
Computer aided transceiver

Computer aided transceiver (CAT) is a non-generic serial protocol used by radio amateurs for (remotely) controlling a transceiver radio receiver equipment using a computer. Conventional transmitters are manually controlled and used to transmit voice using buttons, dials, etc. However, advances in electronics have come to market devices that can be controlled by a computer and allow digital modes such as packet radio and also the use of satellite tracking, because it can continuously change the device's frequency according to the Doppler effect. This is done by connecting a Radio receiver and a PC using a CAT interface and a CAT Program Additionally, CAT interfaces can also be used to position tracking antennas, in controllers. As a satellite moves overhead. A CAT interface is a piece of hardware that connects the PC and radio that provides a connection to allows the radio and the PC to communicate with each other. The CAT interface provides the signals to and fro via correct voltage levels and in the case of a Universal Serial Bus (USB) CAT interface it requires a "protocol" for communication but communication itself is down to the radio and the software on the PC. Software that may be called a CAT program allows a radio to be controlled through the PC. Changes made on the radio through user interactions on the CAT Program are (generally) shown on the PC's screen. The functionality of CAT equipment (software & interface) depends on the radio and what features the software writers included in the CAT software. Modern radio systems do have more CAT functionality If you run a logging program that supports CAT, then that software may take advantage of the CAT system by retrieving information from the radio to help fill in log details, such as the frequency that the contact was made. CAT is also useful on many radios where there are many sub-menus in the radios menu system, and many of the sub-menu items can be easily changed via the PC. On many HF radios, the CAT system is also used to program the memories on the radio, but you would need to use appropriate programming software. A CAT interface does not receive or transmit any DATA mode, that is the purpose of a DATA interface. Although, both may be used at the same time with the correct CAT Equipment. DATA modes, and getting audio to and from the PC is the function of a DATA interface. A completely different thing but it is easier and more useful when CAT and DATA are used at the same time. Wouldn't it be nice to have an interface that could operate Frequency-shift keying (FSK), Audio FSK (AFSK), (real) Morse Code (CW), with a CAT interface and its own sound card..... (eg. The DigiMaster Pro3).
Read more →
Randonautica

Randonautica (a portmanteau of "random" + "nautica") is an app launched on February 22, 2020 founded by Auburn Salcedo and Joshua Lengfelder. It randomly generates coordinates that encourages the user to explore their local area and report what is found. According to its creators, the app is "an attractor of strange things," letting one choose specific coordinates based on a specific theme. It gained controversy after a report of two teenagers coincidentally finding a corpse while using the application. == Overview == The app, which creators claim to be inspired by chaos theory and Guy Debord's Theory of the Dérive, offers its users three types of coordinates to choose from: an attractor, a void, or an anomaly. The app has a cult following on YouTube and TikTok and there is a subreddit made by the creators for users of the app. == History == 29-year-old circus performer Joshua Lengfelder discovered a bot called Fatum Project in a fringe science chat group on Telegram in January 2019. According to The New York Times, "He absorbed the project’s theories about how random exploration could break people out of their predetermined realities, and how people could influence random outcomes with their minds." Lengfelder then created a Telegram bot using Fatum Project's code, generating coordinates. He then created the subreddit r/randonauts in March. In October, developer Simon Nishi McCorkindale made the bot's webpage. With the help of Auburn Salcedo, chief executive of a TV agency, both created Randonauts LLC. Salcedo became the chief operating officer while Lengfelder was the CEO. The app, called Randonautica, was launched on February 22, 2020. Later the same year the app and back-end got completely overhauled by a new team of developers and got a more visual and friendlier design and logo. In April 2022 Lengfelder exited Randonauts LLC and Auburn Salcedo became CEO. == Reception == The app has as many as 10.8 million users as of July 2020, gaining popularity amid the COVID-19 pandemic in the United States as restrictions have been lightened. Emma Chamberlain made a YouTube video about the app that helped increase its following. i-D reported that the hashtag #randonautica has gained 176.5 million views on TikTok, although it has not marketed itself yet. === Controversy === With the app's popularity, users started reporting coincidences which many find unsettling. The majority of reports were from TikTok and Reddit, as well as Telegram. The most notable controversy involved a group of people heading to a beach in Duwamish Head, Puget Sound, West Seattle per the app, where they found a bag with two dead bodies, a 27-year-old male and a 36-year-old female, as reported by the Seattle Police homicide detectives. In August 2020, police arrested and charged their landlord, Michael Lee Dudley, in connection with the murders. In March 2021, Dudley was denied bail while other people were under suspicion of aiding Dudley in the dismemberment and disposal of the bodies, but no one else had been charged. This has caused speculation that the app has an intended, puzzle-like theme. However, Lengfelder stated that it is "a shocking coincidence." Salcedo called the videos fake, and that "It’s so hard to manage, because people are really taking creative liberties after seeing how much traction the app is getting in that fear factor." In 2022, Michael Dudley was convicted of second degree murder for killing both victims, who were identified as Jessica Lewis and Austin Wenner. He was sentenced to 46 years in prison the following year. In their questions page, Randonautica's creators have said that if the app generates coordinates inside a private property, it is a violation of their terms and conditions to trespass. In addition, Randonautica has also received allegations that the app is used for human trafficking, which its creators have denied, saying that data collected by the app are anonymous. It also ensured that the app is not designed to violate religious customs, saying that "the app is simply a tool. Just as a knife can be used either to prepare dinner or to cut somebody."
Read more →
Robert Abel and Associates

Robert Abel and Associates (RA&A) was an American pioneering animation production company specializing in television commercials made with computer graphics. Founded by Robert Abel and Con Pederson in 1971, RA&A was especially known for their art direction and won many Clio Awards. Abel and his team created some of the most advanced and impressive computer-animated works of their time, including full ray-traced renders and fluid character animation at a time when such things were largely unknown. A variety of high-profile television advertisements, graphics sequences for motion pictures (including The Andromeda Strain and Tron), and work on laserdisc video games such as Cube Quest, put Abel and his team on the map in the early 1980s. The company was also originally commissioned to create the visual effects for Star Trek: The Motion Picture, but were subsequently taken off the project for mishandling funds. The company was also notable on its work for The Jacksons' 1981 music video "Can You Feel It." RA&A was on the southwest corner of Highland Avenue and Romaine in the heart of Hollywood, California. RA&A closed in 1987 following an ill-fated merger with now-defunct Omnibus Computer Graphics, Inc., a company which had been based in Toronto. Many people who worked at RA&A went on to other ground-breaking projects, including the founding of Wavefront Technologies, Rhythm & Hues and other studios. Many RA&A people went on to win Academy Awards.
Read more →
Enterprise bookmarking

Enterprise bookmarking is a method for Web 2.0 users to tag, organize, store, and search bookmarks of both web pages on the Internet and data resources stored in a distributed database or fileserver. This is done collectively and collaboratively in a process by which users add tag (metadata) and knowledge tags. In early versions of the software, these tags are applied as non-hierarchical keywords, or terms assigned by a user to a web page, and are collected in tag clouds. Examples of this software are Connectbeam and Dogear. New versions of the software such as Jumper 2.0 and Knowledge Plaza expand tag metadata in the form of knowledge tags that provide additional information about the data and are applied to structured and semi-structured data and are collected in tag profiles. == History == Enterprise bookmarking is derived from Social bookmarking that got its modern start with the launch of the website del.icio.us in 2003. The first major announcement of an enterprise bookmarking platform was the IBM Dogear project, developed in Summer 2006. Version 1.0 of the Dogear software was announced at Lotusphere 2007, and shipped later that year on June 27 as part of IBM Lotus Connections. The second significant commercial release was Cogenz in September 2007. Since these early releases, Enterprise bookmarking platforms have diverged considerably. The most significant new release was the Jumper 2.0 platform, with expanded and customizable knowledge tagging fields. == Differences == === Versus social bookmarking === In a social bookmarking system, individuals create personal collections of bookmarks and share their bookmarks with others. These centrally stored collections of Internet resources can be accessed by other users to find useful resources. Often these lists are publicly accessible, so that other people with similar interests can view the links by category or by the tags themselves. Most social bookmarking sites allow users to search for bookmarks which are associated with given "tags", and rank the resources by the number of users which have bookmarked them. Enterprise bookmarking is a method of tagging and linking any information using an expanded set of tags to capture knowledge about data. It collects and indexes these tags in a web-infrastructure knowledge base server residing behind the firewall. Users can share knowledge tags with specified people or groups, shared only inside specific networks, typically within an organization. Enterprise bookmarking is a knowledge management discipline that embraces Enterprise 2.0 methodologies to capture specific knowledge and information that organizations consider proprietary and are not shared on the public Internet. === Tag management === Enterprise bookmarking tools also differ from social bookmarking tools in the way that they often face an existing taxonomy. Some of these tools have evolved to provide Tag management which is the combination of uphill abilities (e.g. faceted classification, predefined tags, etc.) and downhill gardening abilities (e.g. tag renaming, moving, merging) to better manage the bottom-up folksonomy generated from user tagging.
Read more →
Virtual advertising

Virtual advertising is the use of digital technology to insert virtual advertisements into a live or pre-recorded television show, often in sports events. This technique is often used to allow broadcasters to overlay existing physical advertising panels inside the sports venue with virtual content on the screen when broadcasting the same event in multiple regions; a Spanish football game can be broadcast in Mexico with Mexican advertisements. Similarly, virtual content can be inserted onto empty space within the sports venue such as the pitch, where physical advertising cannot be placed due to regulatory or safety reasons. Virtual advertising content is intended to be photorealistic, so that the viewer has the impression they are seeing the real in-stadium advertising. == History == Throughout the 1980s, 1990s, and 2000s, advertising on television and in newspapers was a popular method of spreading information. The marketer Jeremiah Lynwood stated that "Thirty years ago, [U.S.] consumers viewed an average of 560 ads per day", mostly from newspapers, television shows, gasoline pumps, and so on. Lynwood also stated that, at the time, "American consumers may be exposed to 3,000 commercial messages every day". Within that time frame, the exposure of daily ads have supported many local and big businesses. With the arrival of the 2000s and 2010s, technological advances have created new opportunities for many businesses to grow. In the 21st century, virtual advertising has been used to create virtual product placements in television shows hours, days, or years after they have been produced. Advertisements can be targeted to regional markets and updated over time to ensure maximum efficiency of advertising money. A good example of how virtual advertising is used in everyday life is in sports. Virtual advertising uses the latest technology to place an ad in position to the field of play, regardless of camera motion, and the players' movement over the logos. Recently, the NHL have virtually inserted sponsors on the glass above the physical boards in NHL stadiums. Big brands will not spend their time or money on hitting a certain region when their main goal is to build global brand awareness. Digital signage opportunities allow these larger brands to purchase signage in a stadium during games that are instead nationally televised. This gets even more expansive thanks to social media outlets like Twitter, Facebook, and Amazon. On the other hand, local businesses sign when there are smaller games going on. The signage is much more affordable and still reaches a vast number of people. Virtual advertising may even make live attendance more attractive to sport fans because the technology allows the playing field and surrounding areas to be cleared of advertisements while television viewers at home are exposed to commercials. For the most part, virtual advertising makes a live attendance more attractive to sports fans, because instead of being at home watching commercials, live fans are able to be clear of advertisements and enjoy the game without pop-up ads. == Technology == The technology used in virtual insertions often uses automated processes such as: automatic detection of playfield limits, automatic detection of cuts, recognition of playfield surface, recognition of existing logos for logo replacements, etc. An operator is usually dedicated to the visual control of the effect but new systems allow to use the instant replay operator. == Examples == === Live events === Virtual advertisements can be effectively integrated into live television in real-time. For example, Fox Sports Net places a virtual advertisement on the glass behind the goaltender that can only be seen on television. The advertising in the playfields is property of the club, except in some professional sports where the league or federation owns the advertising rights. However, the advertising rights broadcast on the screen are property of the broadcasters or the TV channel. This means that second right holders can benefit from selling this virtual advertising. The number of TV viewers is also higher than the people in the stadium, generating more visibility to the advertised marks and more income to the broadcasters. Virtual advertising was first introduced in football during the 2015 Audi Cup at the Allianz Arena in Munich. AIM Sport implemented the technology to digitally overlay advertisements on the stadium's perimeter boards, allowing different sponsors to be displayed to viewers in different broadcast regions. In Formula One, virtual ads are placed on the grass or as virtual billboards. In baseball, Major League Baseball places virtual advertisements on a back-board behind the batter which can be targeted differently in local markets or countries. During the World Series, MLB international broadcasts of the World Series feature different advertisements on a per market basis, showing a different ad in the US, Canadian, Latin American and Japanese markets. In tennis, e.g. during the 2019 ATP Finals in London's O2 Arena certain logos in the background were replaced for various country feeds. In table tennis e.g. during the ITTF World Tour Australian Open 2019 virtual advertising overlays were used by uniqFEED AG in Switzerland. Since the 2022–23 season, the National Hockey League (NHL) has used digitally enhanced dasherboards (DED) to erase and replace ads on each arena's boards with up to 120 thirty-second segments on all or part of the rink. Each broadcaster can use a different set of ads. DED were first used at the 2016 World Cup of Hockey, which was organized by the NHL. At UEFA Euro 2024, AIM Sport provided virtual advertising for all matches, marking one of the largest implementations of the technology in an international tournament. In addition to the tournament itself, virtual advertising was also used in the participating teams' domestic matches, extending region-specific advertising beyond the competition itself.
Read more →
SAP BTP

SAP Business Technology Platform (SAP BTP) is a platform as a service developed by SAP SE that offers a suite of services including database and data management, AI, analytics, application development, automation and integration all running on one unified platform. == Overview == SAP BTP is made up of four components: Application development and automation: to create applications or extend existing applications. Data and analytics: to access and analyze data across SAP and third-party systems using multi-cloud architecture. Integration: to integrate and connect applications and data. Artificial Intelligence (AI): to access large language models (LLMs) to develop AI. == History == SAP BTP was introduced as part of the SAP strategy to unify its portfolio and cloud offerings under a single platform. The platform was evolved from earlier initiatives such as SAP Cloud Platform and now serves as the central hub for cloud, data, analytics, integration and AI technologies. Initially unveiled as "SAP NetWeaver Cloud" belonging to the SAP HANA Cloud portfolio on October 16, 2012 the cloud platform was reintroduced with the new name "SAP HANA Cloud Platform" on May 13, 2013 as the foundation for SAP cloud products, including the SAP BusinessObjects Cloud. Adoption of the SAP HANA Cloud Platform in 2015 stood at over 4000 customers and 500 partners. In 2016, SAP and Apple Inc. partnered to develop mobile applications on iOS using cloud-based software development kits (SDKs) for the SAP Cloud Platform. On February 27, 2017, SAP HANA Cloud Platform was renamed "SAP Cloud Platform" at the Mobile World Congress. On January 18, 2021, the name "SAP Cloud Platform" was retired from the SAP product portfolio to support SAP BTP. As of October 2024, SAP states that SAP BTP is used by more than 27,000 customers and more than 2,800 partners. Recently, SAP Business One has worked on improving the functionalities of BTP to cater for the demands of digital transformation. The platform offers comprehensive services in AI, application development, automation, integration, data management, and analytics.
Read more →
Ajax (programming)

The Asynchronous JavaScript and XML, usually referred to as Ajax (or AJAX, ) is a set of web development techniques that uses various web technologies on the client-side to create asynchronous web applications. With Ajax, web applications can send and retrieve data from a server asynchronously (in the background) without interfering with the display and behaviour of the existing page. By decoupling the data interchange layer from the presentation layer, Ajax allows web pages and, by extension, web applications, to change content dynamically without the need to reload the entire page. In practice, modern implementations commonly utilize JSON instead of XML. Ajax is not a technology, but rather a programming pattern. HTML and CSS can be used in combination to mark up and style information. The webpage can be modified by JavaScript to dynamically display (and allow the user to interact with) the new information. The built-in XMLHttpRequest object is used to execute Ajax on webpages, allowing websites to load content onto the screen without refreshing the page. == History == In the early-to-mid 1990s, most Websites were based on complete HTML pages. Each user action required a complete new page to be loaded from the server. This process was inefficient, as reflected by the user experience: all page content disappeared, then the new page appeared. Each time the browser reloaded a page because of a partial change, all the content had to be re-sent, even though only some of the information had changed. This placed additional load on the server and made bandwidth a limiting factor in performance. The foundations of AJAX originate back in 1996 with the introduction of JavaScript 1. Developers quickly discovered that any HTML element which accepted a "src" attribute could be used to fetch remote data. By changing the src of a hidden frame, a developer could fetch remote data, process or display it without a page refresh. The remote data could be a string, JavaScript code, XML or a partial HTML page generated on the server. The same could be done with and tags, but many developers were alarmed at the concept of an executable GIF and preferred to use the hidden . This technique was used for both Netscape Navigator and Internet Explorer, the two main browsers at the time, until developers discovered the XMLHTTP server object (MSXML 1.0) was included in Internet Explorer 4. Browser detection was then used to either implement the hidden <iframe> in Netscape or use the XMLHTTP (MSXML 1.0) object in IE 4. In 1996, the iframe tag was introduced by Internet Explorer; like the object element, it can load a part of the web page asynchronously. In 1998, the Microsoft Outlook Web Access team developed the concept behind the XMLHttpRequest scripting object. It appeared as XMLHTTP in the second version of the MSXML library, which shipped with Internet Explorer 5.0 in March 1999. The functionality of the Windows XMLHTTP ActiveX control in IE 5 was later implemented by Mozilla Firefox, Safari, Opera, Google Chrome, and other browsers as the XMLHttpRequest JavaScript object. Microsoft adopted the native XMLHttpRequest model as of Internet Explorer 7. Support for the ActiveX version remained in Internet Explorer and on "Internet Explorer mode" in Microsoft Edge. The utility of these background HTTP requests and asynchronous Web technologies remained fairly obscure until it started appearing in large scale online applications such as Outlook Web Access (2000) and Oddpost (2002). Google made a wide deployment of standards-compliant, cross browser Ajax with Gmail (2004) and Google Maps (2005). In October 2004 Kayak.com's public beta release was among the first large-scale e-commerce uses of what their developers at that time called "the xml http thing". This increased interest in Ajax among web program developers. The term AJAX was publicly used on 18 February 2005 by Jesse James Garrett in an article titled Ajax: A New Approach to Web Applications, based on techniques used on Google pages. On 5 April 2006, the World Wide Web Consortium (W3C) released the first draft specification for the XMLHttpRequest object in an attempt to create an official Web standard. The latest draft of the XMLHttpRequest object was published on 6 October 2016, and the XMLHttpRequest specification is now a living standard. == Technologies == The term Ajax has come to represent a broad group of Web technologies that can be used to implement a Web application that communicates with a server in the background, without interfering with the current state of the page. In the article that coined the term Ajax, Jesse James Garrett explained that the following technologies are incorporated: HTML (or XHTML) and CSS for presentation The Document Object Model (DOM) for dynamic display of and interaction with data JSON or XML for the interchange of data, and XSLT for XML manipulation The XMLHttpRequest object for asynchronous communication JavaScript to bring these technologies together Since then, however, there have been a number of developments in the technologies used in an Ajax application, and in the definition of the term Ajax itself. XML is no longer required for data interchange and, therefore, XSLT is no longer required for the manipulation of data. JavaScript Object Notation (JSON) is often used as an alternative format for data interchange, although other formats such as preformatted HTML or plain text can also be used. A variety of popular JavaScript libraries, including jQuery, include abstractions to assist in executing Ajax requests. == Examples == === JavaScript example === An example of a simple Ajax request using the GET method, written in JavaScript. get-ajax-data.js: send-ajax-data.php: === Fetch example === Fetch is a native JavaScript API. According to Google Developers Documentation, "Fetch makes it easier to make web requests and handle responses than with the older XMLHttpRequest." ==== ES7 async/await example ==== Fetch relies on JavaScript promises. The fetch specification differs from Ajax in the following significant ways: The Promise returned from fetch() won't reject on HTTP error status even if the response is an HTTP 404 or 500. Instead, as soon as the server responds with headers, the Promise will resolve normally (with the ok property of the response set to false if the response isn't in the range 200–299), and it will only reject on network failure or if anything prevented the request from completing. fetch() won't send cross-origin cookies unless you set the credentials init option. (Since April 2018. The spec changed the default credentials policy to same-origin. Firefox changed since 61.0b13.) == Benefits == Ajax offers several benefits that can significantly enhance web application performance and user experience. By reducing server traffic and improving speed, Ajax plays a crucial role in modern web development. One key advantage of Ajax is its capacity to render web applications without requiring data retrieval, resulting in reduced server traffic. This optimization minimizes response times on both the server and client sides, eliminating the need for users to endure loading screens. Furthermore, Ajax facilitates asynchronous processing by simplifying the utilization of XmlHttpRequest, which enables efficient handling of requests for asynchronous data retrieval. Additionally, the dynamic loading of content enhances the application's performance significantly. Besides, Ajax enjoys broad support across all major web browsers, including Microsoft Internet Explorer versions 5 and above, Mozilla Firefox versions 1.0 and beyond, Opera versions 7.6 and above, and Apple Safari versions 1.2 and higher.</p> <a href="https://aizhi.co/html/323e999667.html" class="read-more" title="Ajax (programming)">Read more →</a> </div> </article> </li> <li class="article-item"> <article class="article-card"> <a href="https://aizhi.co/html/449b999541.html" class="card-thumb-link" title="Variable-message sign"><img class="card-thumb" src="https://aizhi.co/uploads/images/x.jpg" alt="Variable-message sign" loading="lazy"></a> <div class="card-body"> <h2><a href="https://aizhi.co/html/449b999541.html" title="Variable-message sign">Variable-message sign</a></h2> <p class="article-excerpt">A variable- (also changeable-, electronic-, or dynamic-) message sign or message board, often abbreviated VMS, VMB, CMS, or DMS, and in the UK known as a matrix sign, is an electronic traffic sign often used on roadways to give travelers information about special events. Such signs warn of traffic congestion, accidents, incidents such as terrorist attacks, Amber/Silver/Blue Alerts, roadwork zones, or speed limits on a specific highway segment. In urban areas, VMS are used within parking guidance and information systems to guide drivers to available car parking spaces. They may also ask vehicles to take alternative routes, limit travel speed, warn of duration and location of the incidents, inform of the traffic conditions, or display general public safety messages. == History == VMS systems were deployed at least as early as the 1950s on the New Jersey Turnpike. The road's signs of that period, and up to around 2012, were capable of displaying a few messages in neon, all oriented around warning drivers to slow down: "REDUCE SPEED", followed by a warning of either construction, accident, congestion, ice, snow, or fog at a certain distance ahead. The New Jersey Turnpike Authority replaced those signs (along with 1990s-vintage dot-matrix VMS systems along the Garden State Parkway) with more flexible electronic signs between 2010 and 2016. The current VMS systems are largely deployed on freeways, trunk highways, or in work zones. On the interchange of I-5 and SR 120 in San Joaquin County, California, an automated visibility and speed warning system was installed in 1996 to warn traffic of reduced visibility due to fog (where tule fog is a common problem in the winter), and of slow or stopped traffic. Message Signs were deployed in Ontario during the 1990s and are now being upgraded on 400-series highways as well as two pilot secondary highways in northeastern Ontario. == Technologies and types == Early variable message signs included static signs with words that would illuminate (often using neon tubing) indicating the type of incident that occurred, or signs that used rotating prisms (trilons) to change the message being displayed. These were later replaced by dot matrix displays typically using eggcrate, fiber optic, or flip-disc technology, which were capable of displaying a much wider range of messages than earlier static variable message signs. Since the late 1990s, the most common technology used in new installations for variable message signs are LED displays. In recent years, some newer LED variable message signs have the ability to display colored text and graphics. Dot-matrix variable message signs are divided into three subgroups: character matrix, row matrix, and full matrix. In a character matrix VMS, each character is given its own matrix with equal horizontal spacing between them, typically with two or three rows of characters. In a full matrix VMS, the entire sign is a single large dot matrix display, allowing the display of different fonts and graphics. A row matrix VMS is a hybrid of the two types, divided into two or three rows like a character matrix display, except each row is a single long dot matrix display instead of being split per character horizontally. Overhead variable message signs are today available in three form factors: front access, rear access, and walk-in. In a front access variable message sign, maintenance is performed by lifting the sign open from the front. Most smaller VMS are of the front access form factor, and are typically installed today on major arterials. The rear access form factor is similar to the front access form factor, except that maintenance is performed from the rear of the sign, and are commonly used for medium-sized dynamic message signs installed along the roadside of freeways (instead of overhead). The walk-in form factor is a more recent introduction, where maintenance on the sign is performed from the inside of the sign. A key advantage of the walk-in form factor is that lane closures are generally not required to perform maintenance on the sign. Most of the largest VMS units installed today are walk-in units, and are typically installed overhead on freeways. The NJ Turnpike Authority counts five unique types of variable message signs under its jurisdiction, at least one of which has been replaced by newer signs. They are: "REDUCE SPEED" neon signs (1950s-2010, obsolete, have now been replaced). "Changeable message signs" (trilon/ rotating-drum signs that can be used for closing roads or moving traffic to other roadways). Electronic VMS: signs with remotely controlled messages displayed on them; the messages are sent from the State Traffic Management Center, updating the signs automatically. Variable speed limit signs - used for varying the posted speed limits within work zones and in emergencies. Portable VMS: movable "electronic VMS". A portable VMS has much the same characteristics as a fixed electronic VMS, but can be moved from location to location as the need dictates. == Usage == Early models required an operator to be physically present when programming a message, whereas newer models may be reprogrammed remotely via a wired or wireless network or cellphone connection. A complete message on a panel generally includes a problem statement indicating incident, roadwork, stalled vehicle etc.; a location statement indicating where the incident is located; an effect statement indicating lane closure, delay, etc. and an action statement giving suggestion what to do traffic conditions ahead. These signs are also used for Amber alert messages, and in some states, Silver and Blue Alert messages. In some places, VMSes are set up with permanent, semi-static displays indicating predicted travel times to important traffic destinations such as major cities or interchanges along the route of a highway. Typical messages provide the following information: Promotional messages about services provided by a road authority during non-critical hours, such as carpooling efforts, travelers' information stations and 5-1-1 lines Crashes, including vehicle spin-out or rollover Road Works Incidents affecting normal traffic flow in a lane or on shoulders Non-recurring congestion, often a residual effect of cleared crash Closures of an entire road, e.g. over a mountain pass in winter. Exit ramp closures Debris on roadway Vehicle fires Wildfires Short-term maintenance or construction lasting less than three days Pavement failure alerts AMBER, Silver, and Blue Alerts, as well as weather warnings via the warning infrastructure of NOAA Weather Radio's SAME system Travel times Variable speed limits Car park occupancy levels speed sign, for recommending a speed to approach the next traffic light in its green phase. The information comes from a variety of traffic monitoring and surveillance systems. It is expected that by providing real-time information on special events on the oncoming road, VMS can improve motorists' route selection, reduce travel time, mitigate the severity and duration of incidents and improve the performance of the transportation network. === United Kingdom === Do not enter the motorway when the red lamps are flashing in pairs from side to side. On 27 March 1972, the first motorway computer-controlled warning lights in the UK, with 59 miles on the M6 from Broughton, Lancashire to Barthomley, on the Cheshire boundary, and 26 miles on the M62 east of Whitefield, was switched on by Michael Heseltine and Charles Legh Shuldham Cornwall-Legh, 5th Baron Grey of Codnor at the headquarters of Cheshire Constabulary on Nuns Road. It was centred at a police computer centre at Westhoughton, that connected to police stations in Preston and Chester. The Chester site was soon be connected to the M53 and M57. Four other regional computer centres would be opened at Perry Barr near the M6, Scratchwood near the M1, at Hook near the M3, and at Almondsbury near the M4. Most British motorways would be covered by 1975. The system was designed by GEC and had taken five years to design. == Safety messages for drivers == Increasingly, signs have been used to remind drivers to buckle seat belts ("Click It or Ticket"), obey the speed limit, and stay off the road if impaired ("Drive sober or get pulled over"). In a federal study, a slight majority of drivers reported that public safety messages on dynamic message signs impacted their driving behaviors. The Ohio Department of Transportation began using humorous dynamic message signs in 2015, perplexing some drivers. Examples of humorous signs seen in New Jersey, Arizona, Texas, Pennsylvania, Delaware, Iowa, New York, Minnesota and Ohio include: "Hold on to your butts. Help prevent forest fires." "We'll be blunt. Don't drive high." "Visiting in-laws? Slow down, get there late." "Only sparklers should be lit." and “Don’t drive Star Spangled hammered." (for Fourth of July) "Hocus pocus – drive with focus." and "Slow down in work zones - my mummy works here." (f</p> <a href="https://aizhi.co/html/449b999541.html" class="read-more" title="Variable-message sign">Read more →</a> </div> </article> </li> <li class="article-item"> <article class="article-card"> <a href="https://aizhi.co/html/387e999603.html" class="card-thumb-link" title="Style sheet (web development)"><img class="card-thumb" src="https://aizhi.co/uploads/images/x.jpg" alt="Style sheet (web development)" loading="lazy"></a> <div class="card-body"> <h2><a href="https://aizhi.co/html/387e999603.html" title="Style sheet (web development)">Style sheet (web development)</a></h2> <p class="article-excerpt">A web style sheet is a form of separation of content and presentation for web design in which the markup (i.e., HTML or XHTML) of a webpage contains the page's semantic content and structure, but does not define its visual layout (style). Instead, the style is defined in an external style sheet file using a style sheet language such as CSS or XSLT. This design approach is identified as a "separation" because it largely supersedes the antecedent methodology in which a page's markup defined both style and structure. The philosophy underlying this methodology is a specific case of separation of concerns. == Benefits == Separation of style and content has advantages, but has only become practical after improvements in popular web browsers' CSS implementations. === Speed === Overall, users experience of a site utilising style sheets will generally be quicker than sites that do not use the technology. ‘Overall’ as the first page will probably load more slowly – because the style sheet AND the content will need to be transferred. Subsequent pages will load faster because no style information will need to be downloaded – the CSS file will already be in the browser’s cache. === Maintainability === Holding all the presentation styles in one file can reduce the maintenance time and reduces the chance of error, thereby improving presentation consistency. For example, the font color associated with a type of text element may be specified — and therefore easily modified — throughout an entire website simply by changing one short string of characters in a single file. The alternative approach, using styles embedded in each individual page, would require a cumbersome, time consuming, and error-prone edit of every file. === Accessibility === Sites that use CSS with either XHTML or HTML are easier to tweak so that they appear similar in different browsers (Chrome, Internet Explorer, Mozilla Firefox, Opera, Safari, etc.). Sites using CSS "degrade gracefully" in browsers unable to display graphical content, such as Lynx, or those so very old that they cannot use CSS. Browsers ignore CSS that they do not understand, such as CSS 3 statements. This enables a wide variety of user agents to be able to access the content of a site even if they cannot render the style sheet or are not designed with graphical capability in mind. For example, a browser using a refreshable braille display for output could disregard layout information entirely, and the user would still have access to all page content. === Customization === If a page's layout information is stored externally, a user can decide to disable the layout information entirely, leaving the site's bare content still in a readable form. Site authors may also offer multiple style sheets, which can be used to completely change the appearance of the site without altering any of its content. Most modern web browsers also allow the user to define their own style sheet, which can include rules that override the author's layout rules. This allows users, for example, to bold every hyperlink on every page they visit. Browser extensions like Stylish and Stylus have been created to facilitate management of such user style sheets. === Consistency === Because the semantic file contains only the meanings an author intends to convey, the styling of the various elements of the document's content is very consistent. For example, headings, emphasized text, lists and mathematical expressions all receive consistently applied style properties from the external style sheet. Authors need not concern themselves with the style properties at the time of composition. These presentational details can be deferred until the moment of presentation. === Portability === The deferment of presentational details until the time of presentation means that a document can be easily re-purposed for an entirely different presentation medium with merely the application of a new style sheet already prepared for the new medium and consistent with elemental or structural vocabulary of the semantic document. A carefully authored document for a web page can easily be printed to a hard-bound volume complete with headers and footers, page numbers and a generated table of contents simply by applying a new style sheet.</p> <a href="https://aizhi.co/html/387e999603.html" class="read-more" title="Style sheet (web development)">Read more →</a> </div> </article> </li> <li class="article-item"> <article class="article-card"> <a href="https://aizhi.co/html/174d299823.html" class="card-thumb-link" title="Color science"><img class="card-thumb" src="https://aizhi.co/uploads/images/x.jpg" alt="Color science" loading="lazy"></a> <div class="card-body"> <h2><a href="https://aizhi.co/html/174d299823.html" title="Color science">Color science</a></h2> <p class="article-excerpt">Color science is the scientific study of color including lighting and optics; measurement of light and color; the physiology, psychophysics, and modeling of color vision; and color reproduction. It is the modern extension of traditional color theory. == Organizations == International Commission on Illumination (CIE) Illuminating Engineering Society (IES) Inter-Society Color Council (ISCC) Society for Imaging Science and Technology (IS&T) International Colour Association (AIC) Optica, formerly the Optical Society of America (OSA) The Colour Group Society of Dyers and Colourists (SDC) American Association of Textile Chemists and Colorists (AATCC) Association for Research in Vision and Ophthalmology (ARVO) ACM SIGGRAPH Vision Sciences Society (VSS) Council for Optical Radiation Measurements (CORM) == Journals == The preeminent scholarly journal publishing research papers in color science is Color Research and Application, started in 1975 by founding editor-in-chief Fred Billmeyer, along with Gunter Wyszecki, Michael Pointer and Rolf Kuehni, as a successor to the Journal of Colour (1964–1974). Previously most color science work had been split between journals with broader or partially overlapping focus such as the Journal of the Optical Society of America (JOSA), Photographic Science and Engineering (1957–1984), and the Journal of the Society of Dyers and Colourists (renamed Coloration Technology in 2001). Other journals where color science papers are published include the Journal of Imaging Science & Technology, the Journal of Perceptual Imaging, the Journal of the International Colour Association (JAIC), the Journal of the Color Science Association of Japan, Applied Optics, and the Journal of Vision. == Conferences == Congress of the International Color Association IS&T Color and Imaging Conference (CIC) SIGGRAPH International Symposium for Color Science and Art == Selected books == Berns, Roy S. (2019). Billmeyer and Saltzman's Principles of Color Technology (4th ed.). Wiley. doi:10.1002/9781119367314. 3rd ed. (2000). Daw, Nigel (2012). How Vision Works: The Physiological Mechanisms Behind What We See. Oxford. doi:10.1093/acprof:oso/9780199751617.001.0001. Elliot, Andrew J.; Fairchild, Mark D.; Franklin, Anna, eds. (2015). Handbook of Color Psychology. Cambridge. doi:10.1017/CBO9781107337930. Fairchild, Mark D. (2013). Color Appearance Models (3rd ed.). Wiley. doi:10.1002/9781118653128. Author's website. 2nd ed. (2005). Hunt, Robert W. G. (2004). The Reproduction of Colour (6th ed.). Wiley. doi:10.1002/0470024275. Kuehni, Rolf G. (2012). Color: An Introduction to Practice and Principles (3rd ed.). Wiley. doi:10.1002/9781118533567. 1st ed. (1997). Luo, Ming R., ed. (2016). Encyclopedia of Color Science and Technology. Springer. doi:10.1007/978-1-4419-8071-7. MacAdam, David L., ed. (1970). Sources of Color Science. MIT Press. Reinhard, Erik; Khan, Erum Arif; Akyuz, Ahmet Oguz; Johnson, Garrett (2008). Color Imaging: Fundamentals and Applications. CRC Press. doi:10.1201/b10637. Schanda, János, ed. (2007). Colorimetry: Understanding the CIE System. Wiley. doi:10.1002/9780470175637. Shamey, Renzo; Kuehni, Rolf G. (2020). Pioneers of Color Science. Springer. doi:10.1007/978-3-319-30811-1. Wyszecki, Günter; Stiles, Walter S. (1982). Color Science: Concepts and Methods, Quantitative Data and Formulae (2nd ed.). Wiley.</p> <a href="https://aizhi.co/html/174d299823.html" class="read-more" title="Color science">Read more →</a> </div> </article> </li> <li class="article-item"> <article class="article-card"> <a href="https://aizhi.co/html/43b999947.html" class="card-thumb-link" title="Supercomputer operating system"><img class="card-thumb" src="https://aizhi.co/uploads/images/x.jpg" alt="Supercomputer operating system" loading="lazy"></a> <div class="card-body"> <h2><a href="https://aizhi.co/html/43b999947.html" title="Supercomputer operating system">Supercomputer operating system</a></h2> <p class="article-excerpt">A supercomputer operating system is an operating system intended for supercomputers. Since the end of the 20th century, supercomputer operating systems have undergone major transformations, as fundamental changes have occurred in supercomputer architecture. While early operating systems were custom tailored to each supercomputer to gain speed, the trend has been moving away from in-house operating systems and toward some form of Linux, with it running all the supercomputers on the TOP500 list in November 2017. In 2021, top 10 computers run for instance Red Hat Enterprise Linux (RHEL), or some variant of it or other Linux distribution e.g. Ubuntu. Given that modern massively parallel supercomputers typically separate computations from other services by using multiple types of nodes, they usually run different operating systems on different nodes, e.g., using a small and efficient lightweight kernel such as Compute Node Kernel (CNK) or Compute Node Linux (CNL) on compute nodes, but a larger system such as a Linux distribution on server and input/output (I/O) nodes. While in a traditional multi-user computer system job scheduling is in effect a tasking problem for processing and peripheral resources, in a massively parallel system, the job management system needs to manage the allocation of both computational and communication resources, as well as gracefully dealing with inevitable hardware failures when tens of thousands of processors are present. Although most modern supercomputers use the Linux operating system, each manufacturer has made its own specific changes to the Linux distribution they use, and no industry standard exists, partly because the differences in hardware architectures require changes to optimize the operating system to each hardware design. == Context and overview == In the early days of supercomputing, the basic architectural concepts were evolving rapidly, and system software had to follow hardware innovations that usually took rapid turns. In the early systems, operating systems were custom tailored to each supercomputer to gain speed, yet in the rush to develop them, serious software quality challenges surfaced and in many cases the cost and complexity of system software development became as much an issue as that of hardware. In the 1980s the cost for software development at Cray came to equal what they spent on hardware and that trend was partly responsible for a move away from the in-house operating systems to the adaptation of generic software. The first wave in operating system changes came in the mid-1980s, as vendor specific operating systems were abandoned in favor of Unix. Despite early skepticism, this transition proved successful. By the early 1990s, major changes were occurring in supercomputing system software. By this time, the growing use of Unix had begun to change the way system software was viewed. The use of a high level language (C) to implement the operating system, and the reliance on standardized interfaces was in contrast to the assembly language oriented approaches of the past. As hardware vendors adapted Unix to their systems, new and useful features were added to Unix, e.g., fast file systems and tunable process schedulers. However, all the companies that adapted Unix made unique changes to it, rather than collaborating on an industry standard to create "Unix for supercomputers". This was partly because differences in their architectures required these changes to optimize Unix to each architecture. As general purpose operating systems became stable, supercomputers began to borrow and adapt critical system code from them, and relied on the rich set of secondary functions that came with them. However, at the same time the size of the code for general purpose operating systems was growing rapidly. By the time Unix-based code had reached 500,000 lines long, its maintenance and use was a challenge. This resulted in the move to use microkernels which used a minimal set of the operating system functions. Systems such as Mach at Carnegie Mellon University and ChorusOS at INRIA were examples of early microkernels. The separation of the operating system into separate components became necessary as supercomputers developed different types of nodes, e.g., compute nodes versus I/O nodes. Thus modern supercomputers usually run different operating systems on different nodes, e.g., using a small and efficient lightweight kernel such as CNK or CNL on compute nodes, but a larger system such as a Linux-derivative on server and I/O nodes. == Early systems == The CDC 6600, generally considered the first supercomputer in the world, ran the Chippewa Operating System, which was then deployed on various other CDC 6000 series computers. The Chippewa was a rather simple job control oriented system derived from the earlier CDC 3000, but it influenced the later KRONOS and SCOPE systems. The first Cray-1 was delivered to the Los Alamos Lab with no operating system, or any other software. Los Alamos developed the application software for it, and the operating system. The main timesharing system for the Cray 1, the Cray Time Sharing System (CTSS), was then developed at the Livermore Labs as a direct descendant of the Livermore Time Sharing System (LTSS) for the CDC 6600 operating system from twenty years earlier. In developing supercomputers, rising software costs soon became dominant, as evidenced by the 1980s cost for software development at Cray growing to equal their cost for hardware. That trend was partly responsible for a move away from the in-house Cray Operating System to UNICOS system based on Unix. In 1985, the Cray-2 was the first system to ship with the UNICOS operating system. Around the same time, the EOS operating system was developed by ETA Systems for use in their ETA10 supercomputers. Written in Cybil, a Pascal-like language from Control Data Corporation, EOS highlighted the stability problems in developing stable operating systems for supercomputers and eventually a Unix-like system was offered on the same machine. The lessons learned from developing ETA system software included the high level of risk associated with developing a new supercomputer operating system, and the advantages of using Unix with its large extant base of system software libraries. By the middle 1990s, despite the extant investment in older operating systems, the trend was toward the use of Unix-based systems, which also facilitated the use of interactive graphical user interfaces (GUIs) for scientific computing across multiple platforms. The move toward a commodity OS had opponents, who cited the fast pace and focus of Linux development as a major obstacle against adoption. As one author wrote "Linux will likely catch up, but we have large-scale systems now". Nevertheless, that trend continued to gain momentum and by 2005, virtually all supercomputers used some Unix-like OS. These variants of Unix included IBM AIX, the open source Linux system, and other adaptations such as UNICOS from Cray. By the end of the 20th century, Linux was estimated to command the highest share of the supercomputing pie. == Modern approaches == The IBM Blue Gene supercomputer uses the CNK operating system on the compute nodes, but uses a modified Linux-based kernel called I/O Node Kernel (INK) on the I/O nodes. CNK is a lightweight kernel that runs on each node and supports a single application running for a single user on that node. For the sake of efficient operation, the design of CNK was kept simple and minimal, with physical memory being statically mapped and the CNK neither needing nor providing scheduling or context switching. CNK does not even implement file I/O on the compute node, but delegates that to dedicated I/O nodes. However, given that on the Blue Gene multiple compute nodes share a single I/O node, the I/O node operating system does require multi-tasking, hence the selection of the Linux-based operating system. While in traditional multi-user computer systems and early supercomputers, job scheduling was in effect a task scheduling problem for processing and peripheral resources, in a massively parallel system, the job management system needs to manage the allocation of both computational and communication resources. It is essential to tune task scheduling, and the operating system, in different configurations of a supercomputer. A typical parallel job scheduler has a master scheduler which instructs some number of slave schedulers to launch, monitor, and control parallel jobs, and periodically receives reports from them about the status of job progress. Some, but not all supercomputer schedulers attempt to maintain locality of job execution. The PBS Pro scheduler used on the Cray XT3 and Cray XT4 systems does not attempt to optimize locality on its three-dimensional torus interconnect, but simply uses the first available processor. On the other hand, IBM's scheduler on the Blue Gene supercomputers aims to exploit locality a</p> <a href="https://aizhi.co/html/43b999947.html" class="read-more" title="Supercomputer operating system">Read more →</a> </div> </article> </li> <li class="article-item"> <article class="article-card"> <a href="https://aizhi.co/html/474b999516.html" class="card-thumb-link" title="ISO/IEC 11801"><img class="card-thumb" src="https://aizhi.co/uploads/images/x.jpg" alt="ISO/IEC 11801" loading="lazy"></a> <div class="card-body"> <h2><a href="https://aizhi.co/html/474b999516.html" title="ISO/IEC 11801">ISO/IEC 11801</a></h2> <p class="article-excerpt">International standard ISO/IEC 11801 Information technology — Generic cabling for customer premises specifies general-purpose telecommunication cabling systems (structured cabling) that are suitable for a wide range of applications (analog and ISDN telephony, various data communication standards, building control systems, factory automation). It is published by ISO/IEC JTC 1/SC 25/WG 3 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It covers both balanced copper cabling and optical fibre cabling. The standard was designed for use within commercial premises that may consist of either a single building or of multiple buildings on a campus. It was optimized for premises that span up to 3 km, up to 1 km2 office space, with between 50 and 50,000 persons, but can also be applied for installations outside this range. A major revision was released in November 2017, unifying requirements for commercial, home and industrial networks. == Classes and categories == The standard defines several link/channel classes and cabling categories of twisted-pair copper interconnects, which differ in the maximum frequency for which a certain channel performance is required: Class A: Up to 100 kHz using Category 1 cable and connectors Class B: Up to 1 MHz using Category 2 cable and connectors Class C: Up to 16 MHz using Category 3 cable and connectors Class D: Up to 100 MHz using Category 5e cable and connectors Class E: Up to 250 MHz using Category 6 cable and connectors Class EA: Up to 500 MHz using category 6A cable and connectors (Amendments 1 and 2 to ISO/IEC 11801, 2nd Ed.) Class F: Up to 600 MHz using Category 7 cable and connectors Class FA: Up to 1 GHz (1000 MHz) using Category 7A cable and connectors (Amendments 1 and 2 to ISO/IEC 11801, 2nd Ed.) Class BCT-B: Up to 1 GHz (1000 MHz) using with coaxial cabling for BCT applications. (ISO/IEC 11801-1, Edition 1.0 2017-11) Class I: Up to 2 GHz (2000 MHz) using Category 8.1 cable and connectors (ISO/IEC 11801-1, Edition 1.0 2017-11) Class II: Up to 2 GHz (2000 MHz) using Category 8.2 cable and connectors (ISO/IEC 11801-1, Edition 1.0 2017-11) The standard link impedance is 100 Ω. (The older 1995 version of the standard also permitted 120 Ω and 150 Ω in Classes A−C, but this was removed from the 2002 edition.) The standard defines several classes of optical fiber interconnect: OM1: Multimode, 62.5 μm core; minimum modal bandwidth of 200 MHz·km at 850 nm OM2: Multimode, 50 μm core; minimum modal bandwidth of 500 MHz·km at 850 nm OM3: Multimode, 50 μm core; minimum modal bandwidth of 2000 MHz·km at 850 nm OM4: Multimode, 50 μm core; minimum modal bandwidth of 4700 MHz·km at 850 nm OM5: Multimode, 50 μm core; minimum modal bandwidth of 4700 MHz·km at 850 nm and 2470 MHz·km at 953 nm OS1: Single-mode, maximum attenuation 1 dB/km at 1310 and 1550 nm OS1a: Single-mode, maximum attenuation 1 dB/km at 1310, 1383, and 1550 nm OS2: Single-mode, maximum attenuation 0.4 dB/km at 1310, 1383, and 1550 nm Grandfathered === OM5 === OM5 fiber is designed for wideband applications using SWDM multiplexing of 4–16 carriers (40G=4λ×10G, 100G=4λ×25G, 400G=4×4λ×25G) in the 850–953 nm range. === Category 7 === Class F channel and Category 7 cable are backward compatible with Class D/Category 5e and Class E/Category 6. Class F features even stricter specifications for crosstalk and system noise than Class E. To achieve this, shielding was added for individual wire pairs and the cable as a whole. Unshielded cables rely on the quality of the twists to protect from EMI. This involves a tight twist and carefully controlled design. Cables with individual shielding per pair such as Category 7 rely mostly on the shield and therefore have pairs with longer twists. The Category 7 cable standard was ratified in 2002, and primarily introduced to support 10 gigabit Ethernet over 100 m of copper cabling. Like the earlier standards, it contains four twisted copper wire pairs rated for transmission frequencies of up to 600 MHz. However, in 2006, Category 6A was ratified for Ethernet to allow 10 Gbit/s while still using the conventional 8P8C connector. Care is required to avoid signal degradation by mixing cable and connectors not designed for that use, however similar. Most manufacturers of active equipment and network cards have chosen to support the 8P8C for their 10 gigabit Ethernet products on copper and not GG45, ARJ45, or TERA connectors as Class F would have originally called for. Therefore, the Category 6 specification was revised to Category 6A to permit this use; products therefore require a Class EA channel (ie, Cat 6A). As of 2019, some equipment has been introduced which has connectors supporting the Class F (Category 7) channel. Note, however, that Category 7 is not recognized by the TIA/EIA. === Category 7A === Class FA (Class F Augmented) channels and Category 7A cables, introduced by ISO 11801 Edition 2 Amendment 2 (2010), are defined at frequencies up to 1000 MHz. The intent of the Class FA was to possibly support the future 40 gigabit Ethernet: 40GBASE-T. Simulation results have shown that 40 gigabit Ethernet may be possible at 50 meters and 100 gigabit Ethernet at 15 meters. In 2007, researchers at Pennsylvania State University predicted that either 32 nm or 22 nm circuits would allow for 100 gigabit Ethernet at 100 meters. However, in 2016, the IEEE 802.3bq working group ratified the amendment 3 which defines 25GBASE-T and 40GBASE-T on Category 8 cabling specified to 2000 MHz. The Class FA therefore does not support 40G Ethernet. As of 2025, there is no equipment that has connectors supporting the Class FA (Category 7A) channel. Category 7A is not recognized in TIA/EIA. === Category 8 === Category 8 was ratified by the TR43 working group under ANSI/TIA 568-C.2-1. It is defined up to 2000 MHz and only for distances up to 30 m or 36 m, depending on the patch cords used. ISO/IEC JTC 1/SC 25/WG 3 developed the equivalent standard ISO/IEC 11801-1:2017/COR 1:2018, with two options: Class I channel (Category 8.1 cable): minimum cable design U/FTP or F/UTP, fully backward compatible and interoperable with Class EA (Category 6A) using 8P8C connectors; Class II channel (Category 8.2 cable): F/FTP or S/FTP minimum, interoperable with Class FA (Category 7A) using TERA or GG45. == Abbreviations for twisted pairs == Annex E, Acronyms for balanced cables, provides a system to specify the exact construction for both unshielded and shielded balanced twisted pair cables. It uses three letters—U for unshielded, S for braided shielding, and F for foil shielding—to form a two-part abbreviation in the form of xx/xTP, where the first part specifies the type of overall cable shielding, and the second part specifies shielding for individual cable elements. Common cable types include U/UTP (unshielded cable); U/FTP (individual pair shielding without the overall screen); F/UTP, S/UTP, or SF/UTP (overall screen without individual shielding); and F/FTP, S/FTP, or SF/FTP (overall screen with individual foil shielding). == 2017 edition == In November 2017, a new edition was released by ISO/IEC JTC 1/SC 25 "Interconnection of information technology equipment" subcommittee. It is a major revision of the standard which has unified several prior standards for commercial, home, and industrial networks, as well as data centers, and defines requirements for generic cabling and distributed building networks. The new series of standards replaces the former 11801 standard and includes six parts: == Versions == ISO/IEC 11801:1995 (Ed. 1) ISO/IEC 11801:2000 (Ed. 1.1) – Edition 1, Amendment 1 ISO/IEC 11801:2002 (Ed. 2) ISO/IEC 11801:2008 (Ed. 2.1) – Edition 2, Amendment 1 ISO/IEC 11801:2010 (Ed. 2.2) – Edition 2, Amendment 2 ISO/IEC 11801-1:2017, -1:2017/Cor 1:2018, -2:2017, -3:2017, -3:2017/Amd 1:2021, -3:2017/Cor 1:2018, -4:2017, -4:2017/Cor 1:2018, -5:2017, -5:2017/Cor 1:2018, -6:2017, -6:2017/Cor 1:2018 (As of September 2023, this set is current.)</p> <a href="https://aizhi.co/html/474b999516.html" class="read-more" title="ISO/IEC 11801">Read more →</a> </div> </article> </li> </ul> <nav class="pagination" aria-label="Pagination"> <a href="https://aizhi.co/aicontentlabel/10/" class="page-num">1</a><a href="https://aizhi.co/aicontentlabel/11/" class="page-num">2</a><a href="https://aizhi.co/aicontentlabel/12/" class="page-num">3</a><a href="https://aizhi.co/aicontentlabel/13/" class="page-num">4</a><a href="https://aizhi.co/aicontentlabel/14/" class="page-num">5</a><a href="https://aizhi.co/aicontentlabel/15/" class="page-num">6</a><a href="https://aizhi.co/aicontentlabel/16/" class="page-num">7</a><a href="https://aizhi.co/aicontentlabel/17/" class="page-num">8</a><a href="https://aizhi.co/aicontentlabel/18/" class="page-num">9</a><a href="https://aizhi.co/aicontentlabel/19/" class="page-num">10</a> </nav> </main> <aside class="sidebar"> <section class="sidebar-section"> <h2>All Categories</h2> <ul> <li><a href="https://aizhi.co/aiimagegenerators/">AI Image Generators</a></li><li><a href="https://aizhi.co/aicodingtools/">AI Coding Tools</a></li><li><a href="https://aizhi.co/aichatbotsandassistants/">AI Chatbots and Assistants</a></li><li><a href="https://aizhi.co/ainewsandguides/">AI News and Guides</a></li><li><a href="https://aizhi.co/aivideotools/">AI Video Tools</a></li><li><a href="https://aizhi.co/aiwritingtools/">AI Writing Tools</a></li><li><a href="https://aizhi.co/aiforbusiness/">AI for Business</a></li> </ul> </section> <section class="sidebar-section"> <h2>Trending Guides</h2> <ul> <li><a href="https://asdspd.aizhi.co/html/211d299786.html" title="Software engineering professionalism">Software engineering professionalism</a></li><li><a href="https://73864.aizhi.co/html/30e999960.html" title="Cultural technology">Cultural technology</a></li><li><a href="https://efxcpux.aizhi.co/html/259d999731.html" title="The Holocaust and social media">The Holocaust and social media</a></li><li><a href="https://gozqt.aizhi.co/html/431b999559.html" title="Watcher Entertainment">Watcher Entertainment</a></li><li><a href="https://51356597.aizhi.co/html/241f499754.html" title="Model compression">Model compression</a></li><li><a href="https://wisduqxi.aizhi.co/html/404a999586.html" title="Vacuum tube characteristics">Vacuum tube characteristics</a></li><li><a href="https://87l99jt4.aizhi.co/html/309c999681.html" title="International Webmasters Association">International Webmasters Association</a></li><li><a href="https://7799.aizhi.co/html/204b999786.html" title="Ethiopian feminists facing digital gender-based violence">Ethiopian feminists facing digital gender-based violence</a></li><li><a href="https://f.aizhi.co/html/468e099531.html" title="Morphing">Morphing</a></li><li><a href="https://l.aizhi.co/html/487c999503.html" title="Interstellar communication">Interstellar communication</a></li> </ul> </section> </aside> </div> </div> </div> <footer class="site-footer"> <div class="container"> <div class="footer-cols"> <div class="footer-col footer-about"> <a class="brand" href="https://aizhi.co/" aria-label="Aizhi"> <span class="brand-mark" aria-hidden="true">✦</span> <span class="brand-text">Aizhi</span> </a> <p class="footer-tagline">Hand-picked AI tools, generators and practical how-to guides — independent reviews, updated for 2026.</p> </div> <nav class="footer-col" aria-label="Categories"> <h2 class="footer-h">Categories</h2> <ul> <li><a href="https://aizhi.co/ainewsandguides/">AI News and Guides</a></li><li><a href="https://aizhi.co/aiforbusiness/">AI for Business</a></li><li><a href="https://aizhi.co/aichatbotsandassistants/">AI Chatbots and Assistants</a></li><li><a href="https://aizhi.co/aiwritingtools/">AI Writing Tools</a></li><li><a href="https://aizhi.co/aivideotools/">AI Video Tools</a></li><li><a href="https://aizhi.co/aiimagegenerators/">AI Image Generators</a></li><li><a href="https://aizhi.co/aicodingtools/">AI Coding Tools</a></li> </ul> </nav> <nav class="footer-col" aria-label="Site"> <h2 class="footer-h">Site</h2> <ul> <li><a href="https://aizhi.co/">Home</a></li> <li><a href="/sitemap.xml">XML Sitemap</a></li> </ul> </nav> </div> <div class="partner-links" aria-label="Network"> </div> <p class="footer-copy"> © Aizhi. All rights reserved. </p> </div> </footer> </body> </html>