AI Content Update Google

AI Content Update Google — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Local coordinates

Local coordinates are the ones used in a local coordinate system or a local coordinate space. Simple examples: Houses. In order to work in a house construction, the measurements are referred to a control arbitrary point that will allow to check it: stick/sticks on the ground, steel bar, nails... Addresses. Using house numbers to locate a house on a street; the street is a local coordinate system within a larger system composed of city townships, states, countries, postal codes, etc. Local systems exist for convenience. On ancient times, every work was made on relative bases as there was no conception of global systems. Practically, it is better to use local systems for small works as houses, buildings... For most of the applications, it is desired the position of one element relative to one building or location, and in a more local way, relative to one furniture or person. In a regular way, you will not give your position by geographical coordinates rather than "I am 15 meters away of the entry to the building". So it is a pretty common way to locate things. It is possible to bring latitude and longitude for all terrestrial locations, but unless one has a highly precise GPS device or you make astronomical observations, this is impractical. It is much simpler to use a tape, a rope, a chain... The position information (global) should be transformed into a location. Position refers to a numeric or symbolic description within a spatial reference system, whereas location refers to information about surrounding objects and their interrelationships. (Topological space) == Use == In computer graphics and computer animation, local coordinate spaces are also useful for their ability to model independently transformable aspects of geometrical scene graphs. When modeling a car, for example, it is desirable to describe the center of each wheel with respect to the car's coordinate system, but then specify the shape of each wheel in separate local spaces centered about these points. This way, the information describing each wheel can be simply duplicated four times, and independent transformations (e.g., steering rotation) can be similarly effected. Bounding volumes of objects may be described more accurately using extents in the local coordinates, (i.e. an object oriented bounding box, contrasted with the simpler axis aligned bounding box). The trade-off for this flexibility is additional computational cost: the rendering system must access the higher-level coordinate system of the car and combine it with the space of each wheel in order to draw everything in its proper place. Local coordinates also afford digital designers a means around the finite limits of numerical representation. The tread marks on a tire, for example, can be described using millimeters by allowing the whole tire to occupy the entire range of numeric precision available. The larger aspects of the car, such as its frame, might be described in centimeters, and the terrain that the car travels on could be specified in meters. In differential topology, local coordinates on a manifold are defined by means of an atlas of charts. The basic idea behind coordinate charts is that each small patch of a manifold can be endowed with a set of local coordinates. These are collected together into an atlas, and stitched together in such a way that they are self-consistent on the manifold. In Cartography and Maps, the traditional way of works are local datum. With a local datum the land can be mapped on relative small areas as a country. With the need of global systems, the transformations on between datum became a problem, so geodetic datum have been created. More than 150 local datum have been used in the world.
Read more →
Social recruiting

Social recruiting (social hiring or social media recruitment) is recruiting candidates by using social platforms as talent databases or for advertising. Social recruiting uses social media profiles, blogs, and other Internet sites to find information on candidates. It also uses social media to advertise jobs either through HR vendors or through crowdsourcing where job seekers and others share job openings within their online social networks. Social recruiting's effectiveness and return on investment have been difficult to determine, since applicants do not usually apply through the social channels which first attracted them. In May 2013, Maximum Employment Marketing Group released the Social Recruitment Monitor, which ranks the reach, engagement, and interactivity of employers' social recruiting efforts around the world. == Social recruitment software == The social recruitment software market (a form of e-recruitment) is often included in the wider talent management software sector. Bersin & Associates valued the wider talent management market at over $2bn in 2007. Social recruitment increasingly sits at an intersection of a number of fast-moving areas including social networking, recruitment and now cloud computing. Additionally, mobile recruiting has become another hot topic, especially with the rise in tablet and smartphone usage. In 2012, there was a rise of tech companies using social recruiting applications to find and screen applicants. As more companies saw value in filling jobs by putting them on the social platforms where millions of people spend at least 37 minutes daily, there developed a much larger focus on social recruiting among the talent acquisition community. By mid-2013, many major enterprise companies such as Pepsi, Gap, AIG, and Oracle had begun effectively utilizing social recruiting software, making it clear that large corporations were open to automating or streamlining (and ultimately investing in) their social recruiting processes.
Read more →
HKDF

HKDF is a multi-purpose key derivation function (KDF) based on the HMAC message authentication code. HKDF follows "extract-then-expand" paradigm, where the KDF logically consists of two modules: the first stage takes the input keying material and "extracts" from it a fixed-length pseudorandom key, and then the second stage "expands" this key into several additional, independent pseudorandom keys as the output of the KDF. == Mechanism == HKDF is the composition of two functions, HKDF-Extract and HKDF-Expand: HKDF(salt, IKM, info, length) = HKDF-Expand(HKDF-Extract(salt, IKM), info, length) === HKDF-Extract === HKDF-Extract (XTR) takes "input key material" or "source key material" (IKM or SKM) such as a shared secret generated using Diffie-Hellman; an optional, non-secret, random or pseudorandom salt (r); and generates a cryptographic key called the PRK ("pseudorandom key"). HKDF-Extract acts as a "randomness extractor", specifically a "computational extractor", taking a potentially non-uniform value of sufficient min-entropy and generating a value indistinguishable from a uniform random value (pseudorandom). Computational extractors assume attackers are computationally bounded and source entropy may only exist in a computational sense. Such extractors can be built using cryptographic functions under suitable assumptions, modeled as universal hash function (in the generic case) or a random oracle (in constrained scenarios like sources with weak entropy). Salt (r) acts as a "source-independent extractor", strengthening HKDF's security guarantees. Using a fixed public r is safe for multiple invocations of HKDF (on "independent" but secret IKMs which may or may not be derived from the same source), provided r isn't chosen or manipulated by an attacker. Ideally, r is a random string of hash function's output length. Even low quality r (weak entropy or shorter length) is recommended as they contribute "significantly" to the security of the OKM. Without or with a low-entropy, non-secret r, if an attacker can influence the IKMs source in a way that specifically exploits HKDF-Extract's underlying hash function (finding a collision or a specific bias), XTR provides no protection. A random r, even if fixed by the application (for example, random number generators using r as seed), would strengthen protections for that specific extractor session. In such a setting, sufficiently long IKMs also provide better entropy extraction. However, allowing the attacker to influence enough of the IKM after seeing r may result in a completely insecure KDF. HKDF-Extract is the result of HMAC with r as the key (all zeros up to length of the underlying extractor hash function, if not provided) and the IKM as the message. The underlying hash function used for HKDF-Extract step may be different to the one used by HKDF-Expand. It is recommended that HKDF-Extract uses strongest hash function available to the application, as it "concentrates" the entropy already present in IKM but may not necessarily "add" to it. Truncated output from a stronger underlying hash function for XTR (for example, SHA512/256) offers stronger extraction properties. The attacker is assumed to have partial knowledge about IKM (publicly known values in the case of Diffie-Hellman) or partial control over it (entropy pools). HKDF-Extract may be skipped if the IKM is itself a cryptographically strong key (and hence can assume the role of PRK), though it is recommended that HKDF-Extract be applied for the sake of compatibility with the general case, especially if r is available to the application. === HKDF-Expand === HKDF-Expand (PRF) takes the PRK (or any random key-derivation key if HKDF-Extract step is skipped), optional info (CTXinfo), and a length (L), to generate output key material (OKM) of length L. Multiple OKMs can be generated from a single PRK by using different values for CTXinfo, which must be "independent" of the IKM passed in HKDF-Extract. Even if an attacker, who knows r and some auxillary information about the secret IKM, can force the use of the same IKM (and PRK, by extension), in two or more HKDF-Expand contexts (represented by CTXinfo), the OKMs output are computationally independent (leak no useful information on each other). HKDF-Expand, acting as a variable-output-length pseudorandom function (PRF) keyed on PRK, calls HMAC on CTXinfo as the message (empty string, if unspecified) appended to a 8-bit counter i initialized to 1. Subsequent calls to HMAC are chained in "feedback mode" by prepending the previous HMAC output to CTXinfo and incrementing i. OKM is a function of the output size (k bits) of HMAC's underlying hash function; i.e., SHA-256 outputs OKM in segments of k=256 bits for up to a maximum of length i × k bits (255 × 256 bits = 8160 bytes) truncated to desired length L. HKDF-Expand may be skipped if PRK is at least desired length L, though it is recommended that HKDF-Expand be applied for additional "smoothing" of the OKM. == Standardization == HKDF was proposed as a building block in various protocols and applications, as well as to discourage the proliferation of multiple KDF mechanisms by its authors. It is formally described in RFC 5869 with detailed analysis in a paper published in 2010. NIST SP800-56Cr2 specifies a parameterizable extract-then-expand scheme, noting that RFC 5869 HKDF is a version of it and citing its paper for the rationale for the recommendations' extract-and-expand mechanisms. == Applications == HKDF is used in the Signal Protocol for end-to-end encrypted messaging where it generates the message keys, in conjunction with the triple Elliptic-curve Diffie-Hellman handshake (X3DH) key agreement protocol. Signal's "Secure Value Recovery" and "Sealed Sender" are based on HKDF. HKDF is a main component in the Noise Protocol Framework, Message Layer Security, and is used in widely deployed protocols like IPsec Internet Key Exchange and TLS 1.3. The "multi-purpose" nature of HKDF is meant to serve applications that require key extraction, key expansion, and key hierarchies in key wrapping, key exchange, PRNG, and password-based key derivation schemes. == Implementations == There are implementations of HKDF for C#, Go, Java, JavaScript, Perl, PHP, Python, Ruby, Rust, and other programming languages. RFC6234 lays out a reference C implementation of HKDF based on the Secure Hash Standard. === Example in Python ===
Read more →
Data security

Data security or data protection is the process of securing digital information to protect it from online threats. Data security or protection means protecting digital data, such as those in a database, from destructive forces and from the unwanted actions of unauthorized users, such as a cyberattack or a data breach. Data security protects computer hardware, software, storage devices, and the data of user devices. Data security also protects the data of organizations, companies and administrative controls. Data security guarantees the protection of individual data, such as identity documents and bank data, and protects against unauthorized access, theft and loss of individual data. Data security also protects data breaches that occurs in companies and industries. Good security measures in industries reduce the probability of data breaches, and employees can rely on the company with their data and private information to be kept secured while companies can continue to maintain a stable reputation. The CIA Triad (Confidentiality, Integrity, and Availability) is what is used to practice what an information security is required to follow. Confidentiality, protects information from being accessed by unauthorized persons. Integrity, makes sure data is trustworthy; and Availability, meaning that data can be accessed by approved users when it is needed; are three goals for data security. Non-repudiation in data security definition, is a device/service that shows where the data originated from and the proof of integrity. == Technologies == === Disk encryption === Disk encryption refers to encryption technology that encrypts data on a hard disk drive. It takes data from a storage device and coverts it into an unreadable format. Disk encryption typically takes form in either software (see disk encryption software) or hardware (see disk encryption hardware) which can be used together. Disk encryption is often referred to as on-the-fly encryption (OTFE) or transparent encryption. Full disk encryption encrypts each individual sector of a disk volume. Files and user data are encrypted to hinder unauthorized users from accessing without a decryption key. A diversifier permits a plaintext of a specific disk sector to be encrypted into different ciphertexts, which does not require additional storage, such as an initialization vector (IV) or message authentication code (MAC). === Software versus hardware-based mechanisms for protecting data === Software-based security solutions encrypt the data to protect it from theft. However, a malicious program or a hacker could corrupt the data to make it unrecoverable, making the system unusable. Hardware-based security solutions prevent read and write access to data, which provides very strong protection against tampering and unauthorized access. Hardware-based security or assisted computer security offers an alternative to software-only computer security. Security tokens such as those using PKCS#11 or a mobile phone may be more secure due to the physical access required in order to be compromised. Access is enabled only when the token is connected and the correct PIN is entered (see two-factor authentication). However, dongles can be used by anyone who can gain physical access to it. Newer technologies in hardware-based security solve this problem by offering full proof of security for data. Working off hardware-based security: A hardware device allows a user to log in, log out and set different levels through manual actions. Many devices use biometric technology to prevent malicious users from logging in, logging out, and changing privilege levels. The current state of a user of the device is read by controllers in peripheral devices such as hard disks. Illegal access by a malicious user or a malicious program is interrupted based on the current state of a user by hard disk and DVD controllers making illegal access to data impossible. Hardware-based access control is more secure than the protection provided by the operating systems as operating systems are vulnerable to malicious attacks by viruses and hackers. The data on hard disks can be corrupted after malicious access is obtained. With hardware-based protection, the software cannot manipulate the user privilege levels. A hacker or a malicious program cannot gain access to secure data protected by hardware or perform unauthorized privileged operations. This assumption is broken only if the hardware itself is malicious or contains a backdoor. The hardware protects the operating system image and file system privileges from being tampered with. Therefore, a completely secure system can be created using a combination of hardware-based security and secure system administration policies. === Backups === Backup is the process of reproducing copies of essential data and storing in a separate, secured place. It is used to ensure data that is lost can be recovered from another source. Backups contains a minimum of one copy of the data that requires preservation. It is considered essential to keep a backup of any data in most industries and the process is recommended for any files of importance to a user. There are 3 types of backups; full backups, incremental backups, and differential backups. Full backups secure all data from a production system, such as a server, database, or other connected data source. It is impossible to lose all data in a full backup if a breach or corruption were to occur. Full backups require a significantly large amount of time to back up and may be time-consuming taking hours to days to complete. Incremental backups only secures changed data since last backup. While all backups are done in full backups, incremental backups only save data that is recently or frequently changed. Incremental backups require lower storage costs making it a prominent solution for growing datasets. === Data Privacy === Data privacy (or information privacy) is the right for individual's data to be secured to obstruct the use of unauthorized access. It gives individuals control over their data and how it can be shared to third parties. The U.S Privacy Protection Law (see Privacy laws of the United States) requires organizations to inform individuals of how their data is collected and when a data breach occurs. By implementing an encryption, it ensures that private data is unreadable to cybercriminals. === Data masking === Data masking of structured data is the process of obscuring (masking) specific data within a database table or cell to ensure that data security is maintained and sensitive information is not exposed to unauthorized personnel. This may include masking the data from users (for example so banking customer representatives can only see the last four digits of a customer's national identity number), developers (who need real production data to test new software releases but should not be able to see sensitive financial data), outsourcing vendors, etc. Data masking is a form of encryption, as it obscures data by modifying particular letters and numbers to keep data concealed and protected from potential hackers. The individual that has access to the code that decrypts the replaced characters are the only ones that can uncover the data. === Data erasure === Data erasure (or data deletion, data destruction) is a method of software-based overwriting that permanently clears all electronic data residing on a hard drive or other digital media to ensure that no sensitive data is lost when an asset is retired or reused. Article 17: Right to be Forgotten states that users have the right to permanently remove all of their private information from their old devices/services to give people more control over their data. Users are able to switch between devices efficiently. == Threats == === Malware === Malware (or malicious software) is designed to destroy, corrupt or gain unauthorized access to a computer for the purpose of stealing, or destroying data. Hackers who use malware typically utilize many types of malware, which includes computer virus, computer worms, ransomware, spyware and Trojan horse to create a vast system of disruption and cause easy data theft. One of the victims of the vast system of disruption includes healthcare workers, who are targeted by compromised systems by infections and then having their data attacked. === Phishing === Phishing is a type of scam that allows hackers to hoax people using psychological and social engineering (using human emotions such as their trust and fear) tactics into giving personal data through emails and messages, and install computer viruses if the individual were to click on a malicious link unknowingly. Attackers are able to create websites that are very similar to original websites, which makes it difficult to detect a fake website, causing individuals to fall for giving in information. Phishing attackers use human emotion to exploit them, such as making them feel fear, urgency, sympathy with the message
Read more →
Structural risk minimization

Structural risk minimization (SRM) is an inductive principle of use in machine learning. Commonly in machine learning, a generalized model must be selected from a finite data set, with the consequent problem of overfitting – the model becoming too strongly tailored to the particularities of the training set and generalizing poorly to new data. The SRM principle addresses this problem by balancing the model's complexity against its success at fitting the training data. This principle was first set out in a 1974 book by Vladimir Vapnik and Alexey Chervonenkis and uses the VC dimension. In practical terms, Structural Risk Minimization is implemented by minimizing E t r a i n + β H ( W ) {\displaystyle E_{train}+\beta H(W)} , where E t r a i n {\displaystyle E_{train}} is the train error, the function H ( W ) {\displaystyle H(W)} is called a regularization function, and β {\displaystyle \beta } is a constant. H ( W ) {\displaystyle H(W)} is chosen such that it takes large values on parameters W {\displaystyle W} that belong to high-capacity subsets of the parameter space. Minimizing H ( W ) {\displaystyle H(W)} in effect limits the capacity of the accessible subsets of the parameter space, thereby controlling the trade-off between minimizing the training error and minimizing the expected gap between the training error and test error. The SRM problem can be formulated in terms of data. Given n data points consisting of data x and labels y, the objective J ( θ ) {\displaystyle J(\theta )} is often expressed in the following manner: J ( θ ) = 1 2 n ∑ i = 1 n ( h θ ( x i ) − y i ) 2 + λ 2 ∑ j = 1 d θ j 2 {\displaystyle J(\theta )={\frac {1}{2n}}\sum _{i=1}^{n}(h_{\theta }(x^{i})-y^{i})^{2}+{\frac {\lambda }{2}}\sum _{j=1}^{d}\theta _{j}^{2}} The first term is the mean squared error (MSE) term between the value of the learned model, h θ {\displaystyle h_{\theta }} , and the given labels y {\displaystyle y} . This term is the training error, E t r a i n {\displaystyle E_{train}} , that was discussed earlier. The second term, places a prior over the weights, to favor sparsity and penalize larger weights. The trade-off coefficient, λ {\displaystyle \lambda } , is a hyperparameter that places more or less importance on the regularization term. Larger λ {\displaystyle \lambda } encourages sparser weights at the expense of a more optimal MSE, and smaller λ {\displaystyle \lambda } relaxes regularization allowing the model to fit to data. Note that as λ → ∞ {\displaystyle \lambda \to \infty } the weights become zero, and as λ → 0 {\displaystyle \lambda \to 0} , the model typically suffers from overfitting.
Read more →
Public Services Network

The Public Services Network (PSN) is a UK government's high-performance network, which helps public sector organisations work together, reduce duplication and share resources. It unified the provision of network infrastructure across the United Kingdom public sector into an interconnected "network of networks" to increase efficiency and reduce overall public expenditure. It is now a legacy network and public sector organisations are being migrated to using services on the public internet. == Origins == The Public Services Network (PSN) was launched officially as part of the Transformational Government Strategy commencing in 2005, under the original name of the Public Sector Network. Prior to this, some parts of local government had already successfully implemented the concept. The Hampshire Public Services Network (HPSN) was the first PSN, launched in 1999, followed closely by Kent County Councils partnerships with the KPSN. The HPSN, encompassing all of the borough, district and unitary councils, with the County Council, as well as the Fire Services, the Isle of Wight Council and 540 schools. National PSN technical and architecture compliance criteria were established from 2007, by GDS working with local government leaders from Socitm (the Society of Information Technology Management) on the National CIO Council and the Local CIO Council. The PSN's aim was to bring public services organisations with a common interest onto a single, coherent and standards-based ‘network of networks’. This would create influence, economies of scale and a commonality of standards for secure and easy inter-connection between public service organisations. The original concept of a network of networks strategy was based upon the work already undertaken in local government and recognition of Communities of Interest (COI) within the Criminal Justice Sector during work by the Office for Criminal Justice Reform (OCJR) between 2005 and 2007 to enable data sharing across business units. In this context a COI was defined as groups of Government departments and external partners who in combination provided services within a specific area of operation and used the same data, with a similar risk profile, shared risk appetite and common governance framework. Historically each group member had implemented their own networks and standards of operation in isolation with little or no consideration as to how services and data may be shared and resulting in increased costs of operation. The Network of Networks strategy proposed within OCJR recommended the creation of specific networks based upon these Communities of Interest which were joined together through data interchange gateways supporting common standards. Under this approach networks would be arranged by data type and business functions such as Criminal Justice, Health and Social Care, Defence and Intelligence or Public Finance rather than solely on established departmental boundaries. Within a COI, trust relationships and data interchange are readily supported, enabling data sharing without a need to cross network boundaries and providing benefits of scale without the challenges and compromises intrinsic to homogeneous cross sector networks. Data is made available without a need to transport it between organisations and control is retained by the data originator. In early 2007 a group of UK Government department CTOs in conjunction with the Office for Government Commerce Buying Solutions (OGC BS) established the vision for a single commonly provided, procured and managed public sector voice and data network infrastructure to replace the multitude of separately procured and managed networks serving various segments of the UK public sector; Education, Health, Central Government, Local Government etc. In 2008 an Industry Working Group was established to document the objectives and requirements more clearly. Their report set out the architectural and commercial principles as well as anticipated security, service management, governance and transition arrangements. == Architecture == The PSN comprises a core network, the Government Conveyancing Network or GCN provided by GCN Service Providers or GCNSPs. The GCN interconnects multiple operator networks, termed Direct Network Service Providers or DNSPs. Subscriber organisations contract to a connection from a local participating DNSP, connect via that to GCN and hence onwards to other interconnected networks and services. The GCN network is entirely based on IPv4 and MPLS and the GCNSPs are not currently mandated to provide IPv6, though they should have a roadmap to implementing it if and when required. == Commercial framework == In 2010 Virgin Media Business, BT, Cable & Wireless and Global Crossing signed Deeds of Undertaking (DoU) and subsequently achieved accreditation for providing GCN and IP VPN services. In March 2012, BT, Cable & Wireless, Capita Business Services, Eircom, Fujitsu, Kcom, Level 3, Logicalis, MDNX, Thales, Updata and Virgin Media Business were successful bidders for the initial two-year PSN Connectivity framework. In June 2012, 29 companies were confirmed as suppliers of ICT services to the UK public sector under the Government's PSN Services framework contract. Apart from most of the previous suppliers, additional companies also included 2e2, Airwave Solutions, Azzurri Communications, Cassidian, CSC Computer Sciences, Computacenter, Daisy Communications, Easynet Global Services, EE, Freedom Communications, Icom Holdings, NextiraOne, PageOne Communications, Phoenix IT Group, Siemens Communications, Specialist Computer Centres, Telefónica, telent Technology Services, Uniworld Communications and Vodafone. == Governance == The PSN is managed within the Cabinet Office where it is part of the Government Digital Service. == Early implementations == There were already notable initiatives in progress in county council areas, demonstrating public sector network integration in both the Hampshire HPSN2 network and in Kent's community network. Project Pathway was established as a pilot linking these two county-wide networks, with Virgin Media Business and Global Crossing the subscriber and GCN network elements. Staffordshire County Council was the first council in England to establish a PSN that included the county's NHS Health partners. Other county councils have since followed the leads of these councils. == Transition == Centrally procured public sector networks are expected to migrate across to the PSN framework as they reach the end of their contract terms, either through an interim framework or directly. The Government Secure Intranet (GSi) contracts expired in September 2011, running on to 12 February 2012 and were replaced by the transitional Government Secure Intranet Convergence Framework (GCF). The Managed Telephony Service (MTS) contract expired on 31 December 2011 and was replaced by the Managed Telephony Convergence Framework (MTCF). == Future plan == In a blog post published on 20 January 2017, Government Digital Service announced that the Technology Leaders Network (TLN) had agreed that government was starting a journey away from the PSN. This was because using the Internet was considered suitable for the vast majority of the work that the public sector does. The blog post confirmed that the 'move was not going to happen immediately' and stated that 'there's quite a bit of work to do across the public sector to prepare for the changes'. It also stated that it was too early for a full timeline to be provided, although all PSN-connected organisations would be updated as the process evolved. The blog post confirmed that organisations that need to access services that are only available on the PSN would still need to connect to it for the time being and continue to meet its assurance requirements. In a blog post published on 16 March 2017, Government Digital Service (GDS) set out its plans for PSN assurance. The blog post confirmed that the PSN compliance process wasn't 'going anywhere, certainly for a while yet'. It explained that the TLN agreed that – as one of the only recognised, externally accredited, cross-government common assurance standards – it 'needs to live on far beyond the end of the physical PSN network'. Government Digital Service, along with the National Cyber Security Centre (NCSC) and the Cyber and Government Security Directorate, are now looking at ways to expand and reframe PSN compliance in a new context that, while retaining the assurance principles that are the basis of the existing process, will aim to improve the process. A GDS blog post titled 'The road to closing down the PSN' published on 8 September 2020 describes how the public sector will migrate away from the PSN. The Cabinet Office has set up a programme called Future Networks for Government (FN4G) to help organisations move away from the PSN.
Read more →
Forward anonymity

Forward anonymity is a property of a cryptographic system which prevents an attacker who has recorded past encrypted communications from discovering its contents and participants in the future. This property is analogous to forward secrecy. An example of a system which uses forward anonymity is a public key cryptography system, where the public key is well-known and used to encrypt a message, and an unknown private key is used to decrypt it. In this system, one of the keys is always said to be compromised, but messages and their participants are still unknown by anyone without the corresponding private key. In contrast, an example of a system which satisfies the perfect forward secrecy property is one in which a compromise of one key by an attacker (and consequent decryption of messages encrypted with that key) does not undermine the security of previously used keys. Forward secrecy does not refer to protecting the content of the message, but rather to the protection of keys used to decrypt messages. == History == Originally introduced by Whitfield Diffie, Paul van Oorschot, and Michael James Wiener to describe a property of STS (station-to-station protocol) involving a long term secret, either a private key or a shared password. == Public Key Cryptography == Public Key Cryptography is a common form of a forward anonymous system. It is used to pass encrypted messages, preventing any information about the message from being discovered if the message is intercepted by an attacker. It uses two keys, a public key and a private key. The public key is published, and is used by anyone to encrypt a plaintext message. The Private key is not well known, and is used to decrypt cyphertext. Public key cryptography is known as an asymmetric decryption algorithm because of different keys being used to perform opposing functions. Public key cryptography is popular because, while it is computationally easy to create a pair of keys, it is extremely difficult to determine the private key knowing only the public key. Therefore, the public key being well known does not allow messages which are intercepted to be decrypted. This is a forward anonymous system because one compromised key (the public key) does not compromise the anonymity of the system. == Web of Trust == A variation of the public key cryptography system is a Web of trust, where each user has both a public and private key. Messages sent are encrypted using the intended recipient's public key, and only this recipient's private key will decrypt the message. They are also signed with the senders private key. This creates added security where it becomes more difficult for an attacker to pretend to be a user, as the lack of a private key signature indicates a non-trusted user. == Limitations == A forward anonymous system does not necessarily mean a wholly secure system. A successful cryptanalysis of a message or sequence of messages can still decode the information without the use of a private key or long term secret. == News == Forward anonymity, along with other privacy-protecting measures, received a burst of media attention after the leak of classified information by Edward Snowden, beginning in June, 2013, which indicated that the NSA and FBI, through specially crafted backdoors in software and computer systems, were conducting mass surveillance over large parts of the population of both the United States (see Mass surveillance in the United States), Europe, Asia, and other parts of the world. They justified this practice as an aid to catch predatory pedophiles. Opponents to this practice argue that leaving in a back door to law enforcement increases the risk of attackers being able to decrypt information, as well as questioning its legality under the US Constitution, specifically being a form of illegal Search and Seizure.
Read more →
Scalable Coherent Interface

The Scalable Coherent Interface or Scalable Coherent Interconnect (SCI), is a high-speed interconnect standard for shared memory multiprocessing and message passing. The goal was to scale well, provide system-wide memory coherence and a simple interface; i.e. a standard to replace existing buses in multiprocessor systems with one with no inherent scalability and performance limitations. The IEEE Std 1596-1992, IEEE Standard for Scalable Coherent Interface (SCI) was approved by the IEEE standards board on March 19, 1992. It saw some use during the 1990s, but never became widely used and has been replaced by other systems from the early 2000s. == History == Soon after the Fastbus (IEEE 960) follow-on Futurebus (IEEE 896) project in 1987, some engineers predicted it would already be too slow for the high performance computing marketplace by the time it would be released in the early 1990s. In response, a "Superbus" study group was formed in November 1987. Another working group of the standards association of the Institute of Electrical and Electronics Engineers (IEEE) spun off to form a standard targeted at this market in July 1988. It was essentially a subset of Futurebus features that could be easily implemented at high speed, along with minor additions to make it easier to connect to other systems, such as VMEbus. Most of the developers had their background from high-speed computer buses. Representatives from companies in the computer industry and research community included Amdahl, Apple Computer, BB&N, Hewlett-Packard, CERN, Dolphin Server Technology, Cray Research, Sequent, AT&T, Digital Equipment Corporation, McDonnell Douglas, National Semiconductor, Stanford Linear Accelerator Center, Tektronix, Texas Instruments, Unisys, University of Oslo, University of Wisconsin. The original intent was a single standard for all buses in the computer. The working group soon came up with the idea of using point-to-point communication in the form of insertion rings. This avoided the lumped capacitance, limited physical length/speed of light problems and stub reflections in addition to allowing parallel transactions. The use of insertion rings is credited to Manolis Katevenis who suggested it at one of the early meetings of the working group. The working group for developing the standard was led by David B. Gustavson (chair) and David V. James (Vice Chair). David V. James was a major contributor for writing the specifications including the executable C-code. Stein Gjessing’s group at the University of Oslo used formal methods to verify the coherence protocol and Dolphin Server Technology implemented a node controller chip including the cache coherence logic. Different versions and derivatives of SCI were implemented by companies like Dolphin Interconnect Solutions, Convex, Data General AViiON (using cache controller and link controller chips from Dolphin), Sequent and Cray Research. Dolphin Interconnect Solutions implemented a PCI and PCI-Express connected derivative of SCI that provides non-coherent shared memory access. This implementation was used by Sun Microsystems for its high-end clusters, Thales Group and several others including volume applications for message passing within HPC clustering and medical imaging. SCI was often used to implement non-uniform memory access architectures. It was also used by Sequent Computer Systems as the processor memory bus in their NUMA-Q systems. Numascale developed a derivative to connect with coherent HyperTransport. == The standard == The standard defined two interface levels: The physical level that deals with electrical signals, connectors, mechanical and thermal conditions The logical level that describes the address space, data transfer protocols, cache coherence mechanisms, synchronization primitives, control and status registers, and initialization and error recovery facilities. This structure allowed new developments in physical interface technology to be easily adapted without any redesign on the logical level. Scalability for large systems is achieved through a distributed directory-based cache coherence model. (The other popular models for cache coherency are based on system-wide eavesdropping (snooping) of memory transactions – a scheme which is not very scalable.) In SCI each node contains a directory with a pointer to the next node in a linked list that shares a particular cache line. SCI defines a 64-bit flat address space (16 exabytes) where 16 bits are used for identifying a node (65,536 nodes) and 48 bits for address within the node (256 terabytes). A node can contain many processors and/or memory. The SCI standard defines a packet switched network. === Topologies === SCI can be used to build systems with different types of switching topologies from centralized to fully distributed switching: With a central switch, each node is connected to the switch with a ringlet (in this case a two-node ring). In distributed switching systems, each node can be connected to a ring of arbitrary length and either all or some of the nodes can be connected to two or more rings. The most common way to describe these multi-dimensional topologies is k-ary n-cubes (or tori). The SCI standard specification mentions several such topologies as examples. The 2-D torus is a combination of rings in two dimensions. Switching between the two dimensions requires a small switching capability in the node. This can be expanded to three or more dimensions. The concept of folding rings can also be applied to the Torus topologies to avoid any long connection segments. === Transactions === SCI sends information in packets. Each packet consists of an unbroken sequence of 16-bit symbols. The symbol is accompanied by a flag bit. A transition of the flag bit from 0 to 1 indicates the start of a packet. A transition from 1 to 0 occurs 1 (for echoes) or 4 symbols before the packet end. A packet contains a header with address command and status information, payload (from 0 through optional lengths of data) and a CRC check symbol. The first symbol in the packet header contains the destination node address. If the address is not within the domain handled by the receiving node, the packet is passed to the output through the bypass FIFO. In the other case, the packet is fed to a receive queue and may be transferred to a ring in another dimension. All packets are marked when they pass the scrubber (a node is established as scrubber when the ring is initialized). Packets without a valid destination address will be removed when passing the scrubber for the second time to avoid filling the ring with packets that would otherwise circulate indefinitely. === Cache coherence === Cache coherence ensures data consistency in multiprocessor systems. The simplest form applied in earlier systems was based on clearing the cache contents between context switches and disabling the cache for data that were shared between two or more processors. These methods were feasible when the performance difference between the cache and memory were less than one order of magnitude. Modern processors with caches that are more than two orders of magnitude faster than main memory would not perform anywhere near optimal without more sophisticated methods for data consistency. Bus based systems use eavesdropping (snooping) methods since buses are inherently broadcast. Modern systems with point-to point links use broadcast methods with snoop filter options to improve performance. Since broadcast and eavesdropping are inherently non-scalable, these are not used in SCI. Instead, SCI uses a distributed directory-based cache coherence protocol with a linked list of nodes containing processors that share a particular cache line. Each node holds a directory for the main memory of the node with a tag for each line of memory (same line length as the cache line). The memory tag holds a pointer to the head of the linked list and a state code for the line (three states – home, fresh, gone). Associated with each node is also a cache for holding remote data with a directory containing forward and backward pointers to nodes in the linked list sharing the cache line. The tag for the cache has seven states (invalid, only fresh, head fresh, only dirty, head dirty, mid valid, tail valid). The distributed directory is scalable. The overhead for the directory based cache coherence is a constant percentage of the node’s memory and cache. This percentage is in the order of 4% for the memory and 7% for the cache. == Legacy == SCI is a standard for connecting the different resources within a multiprocessor computer system, and it is not as widely known to the public as for example the Ethernet family for connecting different systems. Different system vendors implemented different variants of SCI for their internal system infrastructure. These different implementations interface to very intricate mechanisms in processors and memory systems and each vendor has to preserve some degrees of
Read more →
List of security assessment tools

This is a list of available software and hardware tools that are designed for or are particularly suited to various kinds of security assessment and security testing. == Operating systems and tool suites == Several operating systems and tool suites provide bundles of tools useful for various types of security assessment. === Operating system distributions === Kali Linux (formerly BackTrack), a penetration-test-focused Linux distribution based on Debian Pentoo, a penetration-test-focused Linux distribution based on Gentoo ParrotOS, a Linux distro focused on penetration testing, forensics, and online anonymity. == Tools ==
Read more →
Social media reach

Social media reach is a media analytics metric that refers to the number of users who have come across a particular content on a particular social media platform. Social media platforms have their own individual ways of tracking, analyzing and reporting the traffic on each of the individual platforms. As these platforms are a main source of communication between companies and their target audiences, by conducting research, companies are able to utilize analytical information, such as the reach of their posts, to better understand the interactions between the users and their content. There are multiple underlying factors that will determine what shows up on a newsfeed or timeline. Algorithms, for example, are a type of factor that can alter the reach of a post due to the way the algorithm is coded, which can affect who sees a post and when. Other examples of factors that can impede the reach can include the time at which posts are made, as well as how frequent the posts are between one another. In comparison, an impression is the total number of circumstances where content has been shown on a social timeline, meanwhile, engagement looks at how people interact with the content that they see on a social platform such as like, share or retweet. == Reach on Facebook == Facebook has their own analytic platform which allows the user to see how other users are interacting with their posts, with the use of multiple metrics. This is not something the average user uses, but rather a tool that is used by pages or public figures. For example, Facebook pages that represent a business often look at the activity their posts have generated. There are three types of reach that can be looked at on the Facebook analytic platform. === Types of reach === ==== Organic Reach ==== This type of reach regards the number of distinct users that have seen a specific post on their feed. Organic reach, in other words is the number of people who have seen the post being analyzed on their Facebook newsfeed. Data gathered from this type of reach can give intel to those doing the analysis, such as the demographics of those who have seen the post. ==== Paid Reach ==== This type of reach regards the number of times that distinct users have come across sponsored posts, ads or content. In other words, paid reach is the number of times Facebook users have seen a post that has been paid for by a company. Data collected can give insight, to advertisers or marketers for example, on the activity based around the reach of their post. ==== Viral Reach ==== This type of reach regards the number of views by distinct users on posts that have been commented on or shared by their friends on Facebook. In other words, viral reach looks at the number of people who have seen a post after a friend of theirs commented or shared the original post, therefore it showed on their timeline. Viral reach can be looked at in terms of a collective number of times that the post has been on individual user's timelines. Data collected from viral reach can be used in multiple ways, for example, it can be used to analyze the type of content that gets shared or commented on and can be further used to compare to other posts. === Engaged users === This refers to the number of individual users who have clicked and interacted with a post on Facebook. == Reach on Twitter == Twitter gives access to any of their users to analytics of their tweets as well as their followers. Their dashboard is user friendly, which allows anyone to take a look at the analytics behind their Twitter account. This open access is useful for both the average user and companies as it can provide a quick glance or general outlook of who has seen their tweets. The way that Twitter works is slightly different than the way of Facebook in terms of the reach. On Twitter, especially for users with a higher profile, they are not only engaging with the people who follow them, but also with the followers of their own followers. The reach metric on Twitter looks at the quantity of Twitter users who have been engaged, but also the number of users that follow them as well. This metric is useful to see the if the tweets/content being shared on Twitter are contributing to the growth of audience on this platform. == Reach on Instagram == Instagram gives their users access to their reach, in the Instagram Insights section. Instagram insights can be used to learn more about an account's followers and performance. Reach indicates the total number of unique Instagram accounts that have seen your Instagram post or story. You can find this data by looking at each individual post insights. == Uses of reach == The reach can be a useful metric to analyze for marketers and advertisers. Social media is a platform that is used by marketers to directly target their intended audience with ease. These platforms not only allow marketers to get a better understanding of their audience, but also allow advertisers to insert their ads onto the timelines of specific users to later be able to conduct research to see the reach of their posts/content. The basic goal of marketers is to increase their reach as much as possible to impact bigger audiences of their dream customers and, in the end, make more sales. When doing organic social media marketing, using paid methods like ads or doing influencer marketing whether it is paid or free, it allows marketers to track the performance of their strategy and tweak it based on what works and what does not. == Analytics and reach == Social analytics looks at the data collected based on the interactions of users on social media platforms. A lot of information can be gathered which can provide intel based on user activities on social media. When looking into analytics in regard to social media, each company or group has a different goal in mind to engage their audience. At a glance, the three might seem as if they are very similar, however the differences between them are significant. There are many aspects that can be analyzed from the data gathered from social media platforms, depending on what is being observed, the correct metric would then be selected to further analyze. One example of the many metrics that can be used through social analytics is the reach. == Reach formula == To calculate social media reach one can use the following formula: R = I f ¯ {\displaystyle R={\frac {I}{\bar {f}}}} where R {\displaystyle R} — is social media reach, I {\displaystyle I} stands for the number of impressions, f ¯ {\displaystyle {\bar {f}}} is the average frequency of impressions per user. f ¯ {\displaystyle {\bar {f}}} represents the number of events when the ad is shown to a particular user. The average value should be calculated over the time period with stable settings of advertisement campaign. == Commenting For Better Reach == Commenting For Better Reach also known as "CFBR" is a widely used strategy for organically boosting post reach on social media platforms. Algorithms tend to favor posts with substantial likes and comments, granting them broader exposure compared to less engaging content. Primarily seen on LinkedIn, a platform geared toward professional networking and business connections, the use of CFBR signals active engagement aimed at enhancing post visibility. It is important to note that genuine and meaningful comments are key to effective engagement. Spammy or irrelevant comments not only detract from the conversation but may also limit a post's potential reach and impact.
Read more →
ServerNet

ServerNet is a switched fabric communications link primarily used in proprietary computers made by Tandem Computers, Compaq, and HP. Its features include good scalability, clean fault containment, error detection and failover. The ServerNet architecture specification defines a connection between nodes, either processor or high performance I/O nodes such as storage devices. == History == Tandem Computers developed the original ServerNet architecture and protocols for use in its own proprietary computer systems starting in 1992, and released the first ServerNet systems in 1995. Early attempts to license the technology and interface chips to other companies failed, due in part to a disconnect between the culture of selling complete hardware / software / middleware computer systems and that needed for selling and supporting chips and licensing technology. A follow-on development effort ported the Virtual Interface Architecture to ServerNet with PCI interface boards connecting personal computers. Infiniband directly inherited many ServerNet features. As of 2017, systems still ship based on the ServerNet architecture.
Read more →
Social computing

Social computing is an area of computer science that is concerned with the intersection of social behavior and computational systems. It is based on creating or fostering existing social conventions and social contexts through the use of software and technology. Blogs, email, instant messaging, social network services, wikis, social bookmarking and other instances of what is often called social software illustrate ideas from social computing. The rise in social computing is attributed to the prevalence of personal devices and increased overall computing power. This enables a growing number of users to participate in sharing content and interact with another. == Definitions == Humans—and human behavior—are profoundly social. Humans tend to orient to one another and develop abilities to interact with each other and other species. This ranges from expression and gesture through spoken, written, and body language. Humans are influenced by the behavior of those around them and can rely on social context and cues to make decisions. An example of a behavior relying on social contexts is applauding at the end of the play. This is based on the context that the show ended, and other audience members are applauding. Social information provides a basis for inferences, planning, and coordinating activity. == Examples == Common tools include blogs, email, instant messaging, social networking sites, wikis, and social bookmarking platforms. These technologies enable users to generate content, share knowledge, and interact in real time. == Applications == The rise of social computing has highlighted opportunities for businesses. Businesses are interacting on social computing platforms and investing in facilities to support and research social computing.Business models can leverage the massive customer bases that accumulate through social computing channels. Some organizations have started their own blogs and networks (McAfee, 2006, Joe, 2005). Organizations from diverse industry sectors such as Google, Cisco, and Fox, have sought to acquire or invest in successful social computing enterprises. A business blog can serve as a source of information and promotion for the company. This allows the company to share content about the company and their initiatives. Businesses have also interacted with social computing to market themselves and interact with customers. A notable example is Wendy's with their X (formerly Twitter) account. The account was primarily used to promote business promotions and interact with users in a playful or meaningful way. E-commerce web sites have allowed users to leave reviews and feedback on purchases which has improved online shopping experience for sellers and consumers.As another example of social computing’s business applications, many e-commerce Web sites have adopted online product/vendor feedback/reputation systems. Such systems provide an asynchronous platform for the consumer community to share experiences collectively and influence their purchasing behavior. They also provide a vehicle for eliciting feedback information valuable to the vendors and e-commerce site operators.Consumers can use the feedback systems to make a more educated choice on a purchase by comparing reviews between products or vendors. Sellers can track consumer behaviors and trends regarding a product and adjust their supply according to the demand. == Challenges and criticism == Social computing raises several concerns related to privacy, data security, and algorithmic bias. The widespread collection and analysis of user-generated data can lead to ethical dilemmas, especially when users are unaware of how their information is used. Critics also highlight issues of digital labor, surveillance, and the spread of misinformation, which can influence public opinion and social dynamics. === Term appearance === The term appeared in the mid 1990s after technology advancements and development of the web. In 1994, the concept of social computing was first proposed by Schuler. He thought, "Social computing is a computing application, with software as the medium or focus of social relationships." === Premise === The premise of social computing is that it is possible to design digital systems that support useful functionality by making socially produced information available to their users. This information may be provided directly, as when systems show the number of users who have rated a review as helpful or not. Or the information may be provided after being filtered and aggregated, as is done when systems recommend a product based on what else people with similar purchase history have purchased. Alternatively, the information may be provided indirectly, as is the case with Google's page rank algorithms which orders search results based on the number of pages that (recursively) point to them. In all of these cases, information that is produced by a group of people is used to provide or enhance the functioning of a system. Social computing is concerned with systems of this sort and the mechanisms and principles that underlie them. Social computing can be defined as follows: "Social Computing" refers to systems that support the gathering, representation, processing, use, and dissemination of information that is distributed across social collectivities such as teams, communities, organizations, and markets. Moreover, the information is not "anonymous" but is significantly precise because it is linked to people, who are in turn linked to other people. More recent definitions, however, have foregone the restrictions regarding anonymity of information, acknowledging the continued spread and increasing pervasiveness of social computing. As an example, Hemmatazad, N. (2014) defined social computing as "the use of computational devices to facilitate or augment the social interactions of their users, or to evaluate those interactions in an effort to obtain new information." Social computing has to do with supporting "computations" that are carried out by groups of people, an idea that has been popularized in James Surowiecki's book, The Wisdom of Crowds. Examples of social computing in this sense include collaborative filtering, online auctions, reputation systems, computational social choice, tagging, and verification games. The social information processing page focuses on this sense of social computing. == History == === Technology infrastructure === Users were able to interact more with websites after the development of Web 2.0. This was an advancement from Web 1.0. Comode G. and Krishnamurthy B. (2008) note that "content creators were few in Web 1.0 with the vast majority of users simply acting as consumers of content." Web 2.0 provided functionalities that allowed for low-cost web-hosting services and introduced features with browser windows that used basic information structure and expanded it to as many devices as possible using HTTP, or Hypertext Transfer Protocol. Sometimes referred to as "Enterprise 2.0", a term derived from Web 2.0, social software for enterprise generally refers to the use of social computing in corporate intranets and in other medium- and large-scale business environments. It consisted of a class of tools that allowed for networking and social changes to businesses at the time. It was a layering of the business tools on Web 2.0 and brought forth several applications and collaborative software with specific uses. FinanceElectronic negotiation, which first came up in 1969 and was adapted over time to suit financial markets networking needs, represents an important and desirable coordination mechanism for electronic markets. Negotiation between agents (software agents as well as humans) allows cooperative and competitive sharing of information to determine a proper price. Recent research and practice has also shown that electronic negotiation is beneficial for the coordination of complex interactions among organizations. Electronic negotiation has recently emerged as a very dynamic, interdisciplinary research area covering aspects from disciplines such as Economics, Information Systems, Computer Science, Communication Theory, Sociology and Psychology.Social computing has become more widely known because of its relationship to a number of recent trends. These include the growing popularity of social software and Web 3.0, increased academic interest in social network analysis, the rise of open source as a viable method of production, and a growing conviction that all of this can have a profound impact on daily life. A February 13, 2006 paper by market research company Forrester Research suggested that: === Developments === PLATO was one of the earliest examples of social computing in a live production environment with initially hundreds and soon thousands of users. The PLATO computer system was developed by the University of Illinois at Urbana Champaign in 1960s. In the 70s, the system supported social software applications for multi-us
Read more →
List of robotics journals

List of robotics journals includes notable academic and scientific journals that focus on research in the field of robotics and automation. == Journals == Acta Mechanica et Automatica Advanced Robotics Annual Review of Control, Robotics, and Autonomous Systems IEEE Robotics and Automation Letters IEEE Transactions on Robotics IEEE Transactions on Field Robotics The International Journal of Advanced Manufacturing Technology International Journal of Humanoid Robotics International Journal of Robotics Research Journal of Cognitive Engineering and Decision Making Journal of Field Robotics Journal of Intelligent & Robotic Systems Paladyn Robotics and Autonomous Systems Robotics Science Robotics SLAS Technology
Read more →
Electronic lab notebook

An electronic lab notebook or electronic laboratory notebook (ELN) is a computer program designed to replace paper laboratory notebooks. Lab notebooks in general are used by scientists, engineers, and technicians to document research, experiments, and procedures performed in a laboratory. A lab notebook is often maintained to be a legal document and may be used in a court of law as evidence. Similar to an inventor's notebook, the lab notebook is also often referred to in patent prosecution and intellectual property litigation. Electronic lab notebooks offer many benefits to the user as well as organizations; they are easier to search upon, simplify data copying and backups, and support collaboration amongst many users. ELNs can have fine-grained access controls, and can be more secure than their paper counterparts. They also allow the direct incorporation of data from instruments, replacing the practice of printing out data to be stapled into a paper notebook. == Types == ELNs can be divided into two categories: "Specific ELNs" contain features designed to work with specific applications, scientific instrumentation or data types. "Cross-disciplinary ELNs" or "Generic ELNs" are designed to support access to all data and information that needs to be recorded in a lab notebook. Lab Platforms that combine an ELN, LIMS, and scientific data management together, all-in-one configurable software environment. Solutions range from specialized programs designed from the ground up for use as an ELN, to modifications or direct use of more general programs. Examples of using more general software as an ELN include using OpenWetWare, a MediaWiki install (running the same software that Wikipedia uses), WordPress, or the use of general note taking software such as OneNote as an ELN. ELN's come in many different forms. They can be standalone programs, use a client-server model, or be entirely web-based. Some use a lab-notebook approach, others resemble a blog. ELNs are embracing artificial intelligence and LLM technology to provide scientific AI chat assistants. A good many variations on the "ELN" acronym have appeared. Differences between systems with different names are often subtle, with considerable functional overlap between them. Examples include "ERN" (Electronic Research Notebook), "ERMS" (Electronic Resource (or Research or Records) Management System (or Software) and SDMS (Scientific Data (or Document) Management System (or Software). Ultimately, these types of systems all strive to do the same thing: Capture, record, centralize and protect scientific data in a way that is highly searchable, historically accurate, and legally stringent, and which also promotes secure collaboration, greater efficiency, reduced mistakes and lowered total research costs. == Objectives == A good electronic laboratory notebook should offer a secure environment to protect the integrity of both data and process, whilst also affording the flexibility to adopt new processes or changes to existing processes without recourse to further software development. The package architecture should be a modular design, so as to offer the benefit of minimizing validation costs of any subsequent changes that you may wish to make in the future as your needs change. A good electronic laboratory notebook should be an "out of the box" solution that, as standard, has fully configurable forms to comply with the requirements of regulated analytical groups through to a sophisticated ELN for inclusion of structures, spectra, chromatograms, pictures, text, etc. where a preconfigured form is less appropriate. All data within the system may be stored in a database (e.g. MySQL, MS-SQL, Oracle) and be fully searchable. The system should enable data to be collected, stored and retrieved through any combination of forms or ELN that best meets the requirements of the user. The application should enable secure forms to be generated that accept laboratory data input via PCs and/or laptops / palmtops, and should be directly linked to electronic devices such as laboratory balances, pH meters, etc. Networked or wireless communications should be accommodated for by the package which will allow data to be interrogated, tabulated, checked, approved, stored and archived to comply with the latest regulatory guidance and legislation. A system should also include a scheduling option for routine procedures such as equipment qualification and study related timelines. It should include configurable qualification requirements to automatically verify that instruments have been cleaned and calibrated within a specified time period, that reagents have been quality-checked and have not expired, and that workers are trained and authorized to use the equipment and perform the procedures. == Regulatory and legal aspects == The laboratory accreditation criteria found in the ISO 17025 standard needs to be considered for the protection and computer backup of electronic records. These criteria can be found specifically in clause 4.13.1.4 of the standard. Electronic lab notebooks used for development or research in regulated industries, such as medical devices or pharmaceuticals, are expected to comply with FDA regulations related to software validation. The purpose of the regulations is to ensure the integrity of the entries in terms of time, authorship, and content. Unlike ELNs for patent protection, FDA is not concerned with patent interference proceedings, but is concerned with avoidance of falsification. Typical provisions related to software validation are included in the medical device regulations at 21 CFR 820 (et seq.) and Title 21 CFR Part 11. Essentially, the requirements are that the software has been designed and implemented to be suitable for its intended purposes. Evidence to show that this is the case is often provided by a Software Requirements Specification (SRS) setting forth the intended uses and the needs that the ELN will meet; one or more testing protocols that, when followed, demonstrate that the ELN meets the requirements of the specification and that the requirements are satisfied under worst-case conditions. Security, audit trails, prevention of unauthorized changes without substantial collusion of otherwise independent personnel (i.e., those having no interest in the content of the ELN such as independent quality unit personnel) and similar tests are fundamental. Finally, one or more reports demonstrating the results of the testing in accordance with the predefined protocols are required prior to release of the ELN software for use. If the reports show that the software failed to satisfy any of the SRS requirements, then corrective and preventive action ("CAPA") must be undertaken and documented. Such CAPA may extend to minor software revisions, or changes in architecture or major revisions. CAPA activities need to be documented as well. Aside from the requirements to follow such steps for regulated industry, such an approach is generally a good practice in terms of development and release of any software to assure its quality and fitness for use. There are standards related to software development and testing that can be applied (see ref.).
Read more →
HKDF

HKDF is a multi-purpose key derivation function (KDF) based on the HMAC message authentication code. HKDF follows "extract-then-expand" paradigm, where the KDF logically consists of two modules: the first stage takes the input keying material and "extracts" from it a fixed-length pseudorandom key, and then the second stage "expands" this key into several additional, independent pseudorandom keys as the output of the KDF. == Mechanism == HKDF is the composition of two functions, HKDF-Extract and HKDF-Expand: HKDF(salt, IKM, info, length) = HKDF-Expand(HKDF-Extract(salt, IKM), info, length) === HKDF-Extract === HKDF-Extract (XTR) takes "input key material" or "source key material" (IKM or SKM) such as a shared secret generated using Diffie-Hellman; an optional, non-secret, random or pseudorandom salt (r); and generates a cryptographic key called the PRK ("pseudorandom key"). HKDF-Extract acts as a "randomness extractor", specifically a "computational extractor", taking a potentially non-uniform value of sufficient min-entropy and generating a value indistinguishable from a uniform random value (pseudorandom). Computational extractors assume attackers are computationally bounded and source entropy may only exist in a computational sense. Such extractors can be built using cryptographic functions under suitable assumptions, modeled as universal hash function (in the generic case) or a random oracle (in constrained scenarios like sources with weak entropy). Salt (r) acts as a "source-independent extractor", strengthening HKDF's security guarantees. Using a fixed public r is safe for multiple invocations of HKDF (on "independent" but secret IKMs which may or may not be derived from the same source), provided r isn't chosen or manipulated by an attacker. Ideally, r is a random string of hash function's output length. Even low quality r (weak entropy or shorter length) is recommended as they contribute "significantly" to the security of the OKM. Without or with a low-entropy, non-secret r, if an attacker can influence the IKMs source in a way that specifically exploits HKDF-Extract's underlying hash function (finding a collision or a specific bias), XTR provides no protection. A random r, even if fixed by the application (for example, random number generators using r as seed), would strengthen protections for that specific extractor session. In such a setting, sufficiently long IKMs also provide better entropy extraction. However, allowing the attacker to influence enough of the IKM after seeing r may result in a completely insecure KDF. HKDF-Extract is the result of HMAC with r as the key (all zeros up to length of the underlying extractor hash function, if not provided) and the IKM as the message. The underlying hash function used for HKDF-Extract step may be different to the one used by HKDF-Expand. It is recommended that HKDF-Extract uses strongest hash function available to the application, as it "concentrates" the entropy already present in IKM but may not necessarily "add" to it. Truncated output from a stronger underlying hash function for XTR (for example, SHA512/256) offers stronger extraction properties. The attacker is assumed to have partial knowledge about IKM (publicly known values in the case of Diffie-Hellman) or partial control over it (entropy pools). HKDF-Extract may be skipped if the IKM is itself a cryptographically strong key (and hence can assume the role of PRK), though it is recommended that HKDF-Extract be applied for the sake of compatibility with the general case, especially if r is available to the application. === HKDF-Expand === HKDF-Expand (PRF) takes the PRK (or any random key-derivation key if HKDF-Extract step is skipped), optional info (CTXinfo), and a length (L), to generate output key material (OKM) of length L. Multiple OKMs can be generated from a single PRK by using different values for CTXinfo, which must be "independent" of the IKM passed in HKDF-Extract. Even if an attacker, who knows r and some auxillary information about the secret IKM, can force the use of the same IKM (and PRK, by extension), in two or more HKDF-Expand contexts (represented by CTXinfo), the OKMs output are computationally independent (leak no useful information on each other). HKDF-Expand, acting as a variable-output-length pseudorandom function (PRF) keyed on PRK, calls HMAC on CTXinfo as the message (empty string, if unspecified) appended to a 8-bit counter i initialized to 1. Subsequent calls to HMAC are chained in "feedback mode" by prepending the previous HMAC output to CTXinfo and incrementing i. OKM is a function of the output size (k bits) of HMAC's underlying hash function; i.e., SHA-256 outputs OKM in segments of k=256 bits for up to a maximum of length i × k bits (255 × 256 bits = 8160 bytes) truncated to desired length L. HKDF-Expand may be skipped if PRK is at least desired length L, though it is recommended that HKDF-Expand be applied for additional "smoothing" of the OKM. == Standardization == HKDF was proposed as a building block in various protocols and applications, as well as to discourage the proliferation of multiple KDF mechanisms by its authors. It is formally described in RFC 5869 with detailed analysis in a paper published in 2010. NIST SP800-56Cr2 specifies a parameterizable extract-then-expand scheme, noting that RFC 5869 HKDF is a version of it and citing its paper for the rationale for the recommendations' extract-and-expand mechanisms. == Applications == HKDF is used in the Signal Protocol for end-to-end encrypted messaging where it generates the message keys, in conjunction with the triple Elliptic-curve Diffie-Hellman handshake (X3DH) key agreement protocol. Signal's "Secure Value Recovery" and "Sealed Sender" are based on HKDF. HKDF is a main component in the Noise Protocol Framework, Message Layer Security, and is used in widely deployed protocols like IPsec Internet Key Exchange and TLS 1.3. The "multi-purpose" nature of HKDF is meant to serve applications that require key extraction, key expansion, and key hierarchies in key wrapping, key exchange, PRNG, and password-based key derivation schemes. == Implementations == There are implementations of HKDF for C#, Go, Java, JavaScript, Perl, PHP, Python, Ruby, Rust, and other programming languages. RFC6234 lays out a reference C implementation of HKDF based on the Secure Hash Standard. === Example in Python ===
Read more →