AI Data Analytics

AI Data Analytics — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Language resource

In linguistics and language technology, a language resource is a "[composition] of linguistic material used in the construction, improvement and/or evaluation of language processing applications, (...) in language and language-mediated research studies and applications." According to Bird & Simons (2003), this includes data, i.e. "any information that documents or describes a language, such as a published monograph, a computer data file, or even a shoebox full of handwritten index cards. The information could range in content from unanalyzed sound recordings to fully transcribed and annotated texts to a complete descriptive grammar", tools, i.e., "computational resources that facilitate creating, viewing, querying, or otherwise using language data", and advice, i.e., "any information about what data sources are reliable, what tools are appropriate in a given situation, what practices to follow when creating new data". The latter aspect is usually referred to as "best practices" or "(community) standards". In a narrower sense, language resource is specifically applied to resources that are available in digital form, and then, "encompassing (a) data sets (textual, multimodal/multimedia and lexical data, grammars, language models, etc.) in machine readable form, and (b) tools/technologies/services used for their processing and management". == Typology == As of May 2020, no widely used standard typology of language resources has been established (current proposals include the LREMap, METASHARE, and, for data, the LLOD classification). Important classes of language resources include data lexical resources, e.g., machine-readable dictionaries, linguistic corpora, i.e., digital collections of natural language data, linguistic data bases such as the Cross-Linguistic Linked Data collection, tools linguistic annotations and tools for creating such annotations in a manual or semiautomated fashion (e.g., tools for annotating interlinear glossed text such as Toolbox and FLEx, or other language documentation tools), applications for search and retrieval over such data (corpus management systems), for automated annotation (part-of-speech tagging, syntactic parsing, semantic parsing, etc.), metadata and vocabularies vocabularies, repositories of linguistic terminology and language metadata, e.g., MetaShare (for language resource metadata), the ISO 12620 data category registry (for linguistic features, data structures and annotations within a language resource), or the Glottolog database (identifiers for language varieties and bibliographical database). == Language resource publication, dissemination and creation == A major concern of the language resource community has been to develop infrastructures and platforms to present, discuss and disseminate language resources. Selected contributions in this regard include: a series of International Conferences on Language Resources and Evaluation (LREC), the European Language Resources Association (ELRA, EU-based), and the Linguistic Data Consortium (LDC, US-based), which represent commercial hosting and dissemination platforms for language resources, the Open Languages Archives Community (OLAC), which provides and aggregates language resource metadata, the Language Resources and Evaluation Journal (LREJ), the European Language Grid is a European platform for language technologies (eg services), data and resources. As for the development of standards and best practices for language resources, these are subject of several community groups and standardization efforts, including ISO Technical Committee 37: Terminology and other language and content resources (ISO/TC 37), developing standards for all aspects of language resources, W3C Community Group Best Practices for Multilingual Linked Open Data (BPMLOD), working on best practice recommendations for publishing language resources as Linked Data or in RDF, W3C Community Group Linked Data for Language Technology (LD4LT), working on linguistic annotations on the web and language resource metadata, W3C Community Group Ontology-Lexica (OntoLex), working on lexical resources, the Open Linguistics working group of the Open Knowledge Foundation, working on conventions for publishing and linking open language resources, developing the Linguistic Linked Open Data cloud, the Text Encoding Initiative (TEI), working on XML-based specifications for language resources and digitally edited text.
Read more →
Enterprise resource planning

Enterprise resource planning (ERP) is the integrated management of main business processes, often in real time and mediated by software and technology. ERP is usually referred to as a category of business management software—typically a suite of integrated applications—that an organization can use to collect, store, manage and interpret data from many business activities. The finance module in particular is essential to a suite of applications meeting the definition of an ERP system. The finance module provides the system of record for the organisation; recording the commercial impact of the business operations in the General Ledger. ERP systems can be local-based or cloud-based. Cloud-based applications have grown rapidly since the early 2010s due to the increased efficiencies arising from information being readily available from any location with Internet access. However, ERP differs from integrated business management systems by including planning all resources that are required in the future to meet business objectives. This includes plans for getting suitable staff and manufacturing capabilities for future needs. ERP provides an integrated and continuously updated view of core business processes, typically using a shared database managed by a database management system. ERP systems track business resources—cash, raw materials, production capacity—and the status of business commitments: orders, purchase orders, and payroll. The applications that make up the system share data across various departments (manufacturing, purchasing, sales, accounting, etc.) that provide the data. ERP facilitates information flow between all business functions and manages connections to outside stakeholders. Estimates of the size of the global ERP market range between USD $78 and $81 billion in 2026 . Though early ERP systems focused on large enterprises, smaller enterprises increasingly use ERP systems. The ERP system integrates varied organizational systems and facilitates error-free transactions and production, thereby enhancing the organization's efficiency. However, developing an ERP system differs from traditional system development. ERP systems run on a variety of computer hardware and network configurations, typically using a database as an information repository. == Origin == Business and technology research and advisory firm Gartner is credited for first using the acronym ERP in the 1990s. The term captured a functional extension of two manufacturing-based concepts, material requirements planning (MRP) and manufacturing resource planning (MRP II). Without replacing these terms, ERP came to represent a larger whole that reflected the evolution of application integration beyond manufacturing. Not all ERP packages are developed from a manufacturing core; ERP vendors variously began assembling their packages with finance-and-accounting, maintenance, and human-resource components. By the mid-1990s ERP systems addressed all core enterprise functions. Governments and non–profit organizations also began to use ERP systems. An "ERP system selection methodology" is a formal process for selecting an enterprise resource planning (ERP) system. Existing methodologies include: Kuiper's funnel method, Dobrin's three-dimensional (3D) web-based decision support tool, and the Clarkston Potomac methodology. == Expansion == ERP systems experienced rapid growth in the 1990s. Because of the year 2000 problem many companies took the opportunity to replace their old systems with ERP. ERP systems initially focused on automating back office functions that did not directly affect customers and the public. Front office functions, such as customer relationship management (CRM), dealt directly with customers, or e-business systems such as e-commerce and e-government—or supplier relationship management (SRM) became integrated later, when the internet simplified communicating with external parties. "ERP II" was coined in 2000 in an article by Gartner Publications entitled ERP Is Dead—Long Live ERP II. It describes web–based software that provides real–time access to ERP systems to employees and partners (such as suppliers and customers). The ERP II role expands traditional ERP resource optimization and transaction processing. Rather than just manage buying, selling, etc.—ERP II leverages information in the resources under its management to help the enterprise collaborate with other enterprises. ERP II is more flexible than the first generation ERP. Rather than confine ERP system capabilities within the organization, it goes beyond the corporate walls to interact with other systems. Enterprise application suite is an alternate name for such systems. ERP II systems are typically used to enable collaborative initiatives such as supply chain management (SCM), customer relationship management (CRM) and business intelligence (BI) among business partner organizations through the use of various electronic business technologies. The large proportion of companies are pursuing a strong managerial targets in ERP system instead of acquire an ERP company. Developers now make more effort to integrate mobile devices with the ERP system. ERP vendors are extending ERP to these devices, along with other business applications, so that businesses don't have to rely on third-party applications. As an example, the e-commerce platform Shopify was able to make ERP tools from Microsoft and Oracle available on its app in October 2021. Technical stakes of modern ERP concern integration—hardware, applications, networking, supply chains. ERP now covers more functions and roles—including decision making, stakeholders' relationships, standardization, transparency, globalization, etc. == Functional areas == An ERP system covers the following common functional areas. In many ERP systems, these are called and grouped together as ERP modules: Financial accounting: general ledger, fixed assets, payables including vouchering, matching and payment, receivables and collections, cash management, financial consolidation Management accounting: budgeting, costing, cost management, activity based costing, billing, invoicing (optional) Human resources: recruiting, training, rostering, payroll, benefits, retirement and pension plans, diversity management, retirement, separation Manufacturing: engineering, bill of materials, work orders, scheduling, capacity, workflow management, quality control, manufacturing process, manufacturing projects, manufacturing flow, product life cycle management Order processing: order to cash, order entry, credit checking, pricing, available to promise, inventory, shipping, sales analysis and reporting, sales commissioning Supply chain management: supply chain planning, supplier scheduling, product configurator, order to cash, purchasing, inventory, claim processing, warehousing (receiving, putaway, picking and packing) Project management: project planning, resource planning, project costing, work breakdown structure, billing, time and expense, performance units, activity management Customer relationship management (CRM): sales and marketing, commissions, service, customer contact, call center support – CRM systems are not always considered part of ERP systems but rather business support systems (BSS) Supplier relationship management (SRM): suppliers, orders, payments. Data services: various "self-service" interfaces for customers, suppliers or employees Management of school and educational institutes. Contract management: creating, monitoring, and managing contracts, reducing administrative burdens and minimising legal risks. These modules often feature contract templates, electronic signature capabilities, automated alerts for contract milestones, and advanced search functionality. === GRP – ERP use in government === Government resource planning (GRP) is the equivalent of an ERP for the public sector and an integrated office automation system for government bodies. The software structure, modularization, core algorithms and main interfaces do not differ from other ERPs, and ERP software suppliers manage to adapt their systems to government agencies. Both system implementations, in private and public organizations, are adopted to improve productivity and overall business performance in organizations, but comparisons (private vs. public) of implementations shows that the main factors influencing ERP implementation success in the public sector are cultural. == Best practices == Most ERP systems incorporate best practices. This means the software reflects the vendor's interpretation of the most effective way to perform each business process. Systems vary in how conveniently the customer can modify these practices. Use of best practices eases compliance with requirements such as International Financial Reporting Standards, Sarbanes–Oxley, or Basel II. They can also help comply with de facto industry standards, such as electronic funds transfer. This is because the procedure can be readily
Read more →
Manual override

A manual override (MO) or manual analog override (MAO) is a mechanism where control is taken from an automated system and given to the user. For example, a manual override in photography refers to the ability for the human photographer to turn off the automatic aperture sizing, automatic focusing, or any other automated system on the camera. Some manual overrides can be used to veto an automated system's judgment when the system is in error. An example of this is a printer's ink level detection: in one case, a researcher found that when he overrode the system, up to 38% more pages could be printed at good quality by the printer than the automated system would have allowed. Automated systems are becoming increasingly common and integrated into everyday objects such as automobiles and domestic appliances. This development of ubiquitous computing raises general issues of policy and law about the need for manual overrides for matters of great importance such as life-threatening situations and major economic decisions. The loyalty of such autonomous devices then becomes an issue. If they follow rules installed by the manufacturer or required by law and refuse to cede control in some situations then the owners of the devices may feel disempowered, alienated and lacking true ownership. == Major incidents == China Airlines Flight 140 crashed, causing many deaths, due to a misunderstanding about the manual overrides for the autopilot. The Take-Off/Go Around system had been activated to abort a landing. It was programmed to ignore manual controls in this situation but the human pilots tried to continue the landing. The conflicting control signals from the pilots and autopilot then resulted in the aircraft stalling and crashing. The autopilot for this aircraft type was then reprogrammed so that it would never ignore a manual override.
Read more →
Robinson compass mask

In image processing, a Robinson compass mask is a type of compass mask used for edge detection. It has eight major compass orientations, each will extract the edges in respect to its direction. A combined use of compass masks of different directions could detect the edges from different angles. == Technical explanation == The Robinson compass mask is defined by taking a single mask and rotating it to form eight orientations: North: [ − 1 0 1 − 2 0 2 − 1 0 1 ] {\displaystyle {\text{North:}}{\begin{bmatrix}-1&0&1\\-2&0&2\\-1&0&1\end{bmatrix}}} North West: [ 0 1 2 − 1 0 1 − 2 − 1 0 ] {\displaystyle {\text{North West:}}{\begin{bmatrix}0&1&2\\-1&0&1\\-2&-1&0\end{bmatrix}}} West: [ 1 2 1 0 0 0 − 1 − 2 − 1 ] {\displaystyle {\text{West:}}{\begin{bmatrix}1&2&1\\0&0&0\\-1&-2&-1\end{bmatrix}}} South West: [ 2 1 0 1 0 − 1 0 − 1 − 2 ] {\displaystyle {\text{South West:}}{\begin{bmatrix}2&1&0\\1&0&-1\\0&-1&-2\end{bmatrix}}} South: [ 1 0 − 1 2 0 − 2 1 0 − 1 ] {\displaystyle {\text{South:}}{\begin{bmatrix}1&0&-1\\2&0&-2\\1&0&-1\end{bmatrix}}} South East: [ 0 − 1 − 2 1 0 − 1 2 1 0 ] {\displaystyle {\text{South East:}}{\begin{bmatrix}0&-1&-2\\1&0&-1\\2&1&0\end{bmatrix}}} East: [ − 1 − 2 − 1 0 0 0 1 2 1 ] {\displaystyle {\text{East:}}{\begin{bmatrix}-1&-2&-1\\0&0&0\\1&2&1\end{bmatrix}}} North East: [ − 2 − 1 0 − 1 0 1 0 1 2 ] {\displaystyle {\text{North East:}}{\begin{bmatrix}-2&-1&0\\-1&0&1\\0&1&2\end{bmatrix}}} The direction axis is the line of zeros in the matrix. Robinson compass mask is similar to kirsch compass masks, but is simpler to implement. Since the matrix coefficients only contains 0, 1, 2, and are symmetrical, only the results of four masks need to be calculated, the other four results are the negation of the first four results. An edge, or contour is an tiny area with neighboring distinct pixel values. The convolution of each mask with the image would create a high value output where there is a rapid change of pixel value, thus an edge point is found. All the detected edge points would line up as edges. == Example == An example of Robinson compass masks applied to the original image. Obviously, the edges in the direction of the mask is enhanced.
Read more →
Image analysis

Image analysis or imagery analysis is the extraction of meaningful information from images; mainly from digital images by means of digital image processing techniques. Image analysis tasks can be as simple as reading bar coded tags or as sophisticated as identifying a person from their face. Computers are indispensable for the analysis of large amounts of data, for tasks that require complex computation, or for the extraction of quantitative information. On the other hand, the human visual cortex is an excellent image analysis apparatus, especially for extracting higher-level information, and for many applications — including medicine, security, and remote sensing — human analysts still cannot be replaced by computers. For this reason, many important image analysis tools such as edge detectors and neural networks are inspired by human visual perception models. == Digital == Digital Image Analysis or Computer Image Analysis is when a computer or electrical device automatically studies an image to obtain useful information from it. Note that the device is often a computer but may also be an electrical circuit, a digital camera or a mobile phone. It involves the fields of computer or machine vision, and medical imaging, and makes heavy use of pattern recognition, digital geometry, and signal processing. This field of computer science developed in the 1950s at academic institutions such as the MIT A.I. Lab, originally as a branch of artificial intelligence and robotics. It is the quantitative or qualitative characterization of two-dimensional (2D) or three-dimensional (3D) digital images. 2D images are, for example, to be analyzed in computer vision, and 3D images in medical imaging. The field was established in the 1950s—1970s, for example with pioneering contributions by Azriel Rosenfeld, Herbert Freeman, Jack E. Bresenham, or King-Sun Fu. == Techniques == There are many different techniques used in automatically analysing images. Each technique may be useful for a small range of tasks, however there still aren't any known methods of image analysis that are generic enough for wide ranges of tasks, compared to the abilities of a human's image analysing capabilities. Examples of image analysis techniques in different fields include: 2D and 3D object recognition, image segmentation, motion detection e.g. Single particle tracking, video tracking, optical flow, medical scan analysis, 3D Pose Estimation. == Deep learning == Since the early 2010s, deep learning methods have substantially advanced the field of image analysis. In 2012, a deep convolutional neural network (CNN) known as AlexNet achieved a significant reduction in error rates on the ImageNet large-scale image classification benchmark, demonstrating the effectiveness of deep learning for visual recognition tasks. Subsequent architectures such as ResNet introduced residual connections that enabled training of much deeper networks, further improving accuracy across image analysis tasks. Real-time object detection became practical with frameworks such as YOLO (You Only Look Once), which unified detection and classification into a single network pass. In 2020, the Vision Transformer (ViT) demonstrated that transformer architectures, originally developed for natural language processing, could achieve competitive results on image classification when applied directly to sequences of image patches. More recently, foundation models trained on large-scale datasets have enabled zero-shot generalisation across image analysis tasks. The Segment Anything Model (SAM), trained on over one billion masks, can segment arbitrary objects in images without task-specific fine-tuning. These advances have made image analysis techniques increasingly accessible through browser-based tools and open-source implementations. == Applications == The applications of digital image analysis are continuously expanding through all areas of science and industry, including: anatomy, allows for precise measurements, visualization, and statistical analysis of anatomical structures. assay micro plate reading, such as detecting where a chemical was manufactured. astronomy, such as calculating the size of a planet. automated species identification (e.g. plant and animal species) defense error level analysis filtering machine vision, such as to automatically count items in a factory conveyor belt. materials science, such as determining if a metal weld has cracks. medicine, such as detecting cancer in a mammography scan. metallography, such as determining the mineral content of a rock sample. microscopy, such as counting the germs in a swab. automatic number plate recognition; optical character recognition, such as automatic license plate detection. remote sensing, such as detecting intruders in a house, and producing land cover/land use maps. robotics, such as to avoid steering into an obstacle. security, such as detecting a person's eye color or hair color. == Object-based == Object-based image analysis (OBIA) involves two typical processes, segmentation and classification. Segmentation helps to group pixels into homogeneous objects. The objects typically correspond to individual features of interest, although over-segmentation or under-segmentation is very likely. Classification then can be performed at object levels, using various statistics of the objects as features in the classifier. Statistics can include geometry, context and texture of image objects. Over-segmentation is often preferred over under-segmentation when classifying high-resolution images. Object-based image analysis has been applied in many fields, such as cell biology, medicine, earth sciences, and remote sensing. For example, it can detect changes of cellular shapes in the process of cell differentiation.; it has also been widely used in the mapping community to generate land cover. When applied to earth images, OBIA is known as geographic object-based image analysis (GEOBIA), defined as "a sub-discipline of geoinformation science devoted to (...) partitioning remote sensing (RS) imagery into meaningful image-objects, and assessing their characteristics through spatial, spectral and temporal scale". The international GEOBIA conference has been held biannually since 2006. OBIA techniques are implemented in software such as eCognition or the Orfeo toolbox.
Read more →
BevQ

BevQ is a queue management mobile application developed by Faircode Technologies of Kochi, Kerala. It is provided by the Kerala State Beverages Corporation under Government of Kerala. == History == This app was released together by the Government of Kerala and the Kerala State Beverages Corporation in order to implement social distancing in the liquor stores Kerala in the case of the COVID-19 pandemic in Kerala and to reduce the congestion of people. The BevQ App was released by Faircode Technologies on 27 May 2020 on the Google Play Store. In January 2021, the app was withdrawn as bars had opened. In June 2021, there was a commitment from the Kerala CM that the App will be relaunched again. It has been reported that over 132,000 new users downloaded the app in the 48 hours after the announcement. == Achievements == The BEVQ app, which works only in the state of Kerala, beat all other Indian food and drink apps in 2020 to see the highest growth in year-on-year sessions, according to the State of Mobile 2021 report by App Annie. The app even beat the likes of Domino’s, which is used all across India. Around 300 government Liquor shops and 900 private liquor shops were enlisted in the platform. More than 200 million unique users registered in the platform. About 250,000 tokens were given out a day.
Read more →
Aphelion (software)

The Aphelion Imaging Software Suite is a software suite that includes three base products - Aphelion Lab, Aphelion Dev, and Aphelion SDK for addressing image processing and image analysis applications. The suite also includes a set of extension programs to implement specific vertical applications that benefit from imaging techniques. The Aphelion software products can be used to prototype and deploy applications, or can be integrated, in whole or in part, into a user's system as processing and visualization libraries whose components are available as both DLLs or .Net components. == History and evolution == The development of Aphelion started in 1995 as a joint project of a French company, ADCIS S.A., and an American company, Amerinex Applied Imaging, Inc. (AAI) Aphelion's image processing and analysis functions were made from operators available from the KBVision software developed and sold by Amerinex's predecessor, Amerinex Artificial Intelligence Inc. In the 1990s, the XLim software library was developed at the Center of Mathematical Morphology of Mines ParisTech, and both companies carried out its development tasks. The first version of Aphelion was completed and released in April 1996. Successive versions were released before the first official stable release in December 1996 at the Photonics East conference in Boston and the Solutions Vision show in Paris in January 1997, where at the latter it competed with Stemmer Imaging's CVB imaging toolbox. In 1998, version 2.3 of Aphelion for Windows 98 was released, and its user base was growing in both France and the United States. Version 3.0, totally rewritten to take advantage of Microsoft's then-recent ActiveX technology, was officially released in 2000. It also became available as a « Developer » version, for rapid prototyping of applications using its intuitive GUI and the macro recording capability, and a « Core » version, including the full library as a set of ActiveX components to be used by software developers, integrators and original equipment manufacturers (OEM). As AAI turned its focus to security, in 2001, ADCIS took the lead on developing Aphelion. AAI focused on millimeter wave scanners for concealed weapon detection at airports, and eventually merged with Millimetrics to become Millivision. In 2004, ADCIS specified version 4.0 of Aphelion. The set of image processing/analysis functions was rewritten one more time to be compatible with the .NET technology and the emergence of 64 bit architecture PCs. In addition, the GUI was redesigned to address two usage types: a semi-automatic use where the user is guided through the different steps of functions, and a fully automatic use where the expert user can quickly invoke imaging functions. Its first release was presented at the IPOT exhibition in Birmingham, UK the same year. During the Vision Show in Paris in October 2008, the new Aphelion Lab product was launched for users that are not specialists in image processing. It is easier to use, and only includes fewer image processing functions. It was then included in the Aphelion Image Processing Suite, consisting of Aphelion Dev (replacing Aphelion Developer), Aphelion Lab, Aphelion SDK (replacing Aphelion Core), and a set of extensions. Nowadays, ADCIS is still working on the suite, and updated versions with new extensions and functionalities continually become available from the websites of both companies. In 2015, support was added for very large images and scan microscope images (virtual slides compound into a very large JPEG 2000 image) for high throughput imaging, and new specific extensions were also added. In late 2015, ADCIS announced Aphelion's port for tablets and smartphones, for vertical applications. The name "Aphelion" comes from the astronomical term of the same name, meaning the point on a planet rotating around the Sun where it lies farthest from it, applying the term in a metaphorical sense. Unix was the operating system used on scientific workstations in the 1990s, such as on the workstations manufactured by market leader Sun Microsystems, which Windows suite Aphelion was quite removed from. == Description == Aphelion is a software suite to be used for image processing and image analysis. It supports 2D and 3D, monochrome, color, and multi-band images. It is developed by ADCIS, a French software house located in Saint-Contest, Calvados, Normandy. Aphelion is widely used in the scientific/industry community to solve basic and complex imaging applications. First, the imaging application is quickly developed from the Graphical User Interface, involving a set of functions that can be automatically recorded into a macro command. The macro languages available in Aphelion (i.e. BasicScript, Python, and C#) help to process batch of images, and prompt the user if needed for specific parameters that are applied to the imaging functions. All Aphelion image processing functions are written in C++, and the Aphelion user interface is written in C#. C++ functions can be called from the C# language thanks the use of dedicated wrappers. The main principle of image processing is to automatically process pixels of a digital image, then extract one or more objects of interest (i.e. cells in the field of biology, inclusions in the field of material science) and compute one or more measurements on those objects to quantify the image and generate a verdict (good image, image with defects, cancerous cells). In other words, starting from an image, pixels are processed by a set of successive functions or operators until only measurements are computed and used as the input of a 3rd party system or a classification software that will classify objects of interest that have been extracted during the imaging process. An acquisition system such as a digital camera, a video camera, an optical or electron microscope, a medical scanner, or a smartphone can be used to capture images. The set of values or pixels can be processed as a 1D image (1D signal), a 2D image (array of pixel values corresponding to a monochrome or color image), or a 3D image displayed using volume rendering (array of voxels in the 3D space) or displaying surfaces by using 3D rendering. A 2D color image is made of 3 value pixels (typically Red, Green, and Blue information or another color space), and a 3D image is made of monochrome, color (indexed color are often used), multispectral, or hyperspectral data. When dealing with videos, an additional band is added corresponding to temporal information. The Aphelion Software Suite includes three base products, and a set of optional extensions for specific applications: Aphelion Lab: Entry-level package for non-experts in image processing. It helps to quickly segment an image in a semi-automatic or manual ways, and compute a set of measurements computed on objects of interest that have been extracted during the segmentation process. A set of wizards guides the user from image acquisition to report generation. Aphelion Dev: Full imaging environment including over 450 functions to develop and deploy an application that involves image processing and analysis. It also includes a set of macro-command languages to automate any application to be invoked from the user interface. It also helps to run the imaging algorithm on more than one image that are stored on disk, available on the network, or captured by an acquisition device. Aphelion libraries for image processing and visualization are provided in Aphelion Dev as DLLs and .Net components. Aphelion SDK: A set of libraries to develop a stand-alone application with a custom interface based on the Aphelion libraries. This software development kit including display, processing and analysis functions that can be used by software developers and OEMs. It is provided as DLLs and .Net components. The stand-alone application is typically developed in C# on one computer, and then deployed on multiple PCs and systems. A set of optional extensions can be added to the « Aphelion Dev » product, depending on the application. An evaluation version of Aphelion can be run on a PC for 30 days. A permanent version of Aphelion is available based on a perpetual license. Upgrades are available through a maintenance agreement based on a yearly fee. Technical support is provided by the engineers who are developing the product. The goal of image processing is usually to extract object(s) of interest in an image, and then to classify them based on some characteristics such as shape, density, position, etc. Using Aphelion, this goal is achieved by performing the following tasks: Load an image from disk or acquire an image using an acquisition device. Enhance the image removing noise or modifying its contrast. Segment the image extracting objects of interest to be measured and analyzed. Typically, for simple applications, a threshold is performed to generate a binary image. Then, morphological operators are applied to clean the image and only keep obj
Read more →
Multiple buffering

In computer science, multiple buffering is the use of more than one buffer to hold a block of data, so that a "reader" will see a complete (though perhaps old) version of the data instead of a partially updated version of the data being created by a "writer". It is very commonly used for computer display images. It is also used to avoid the need to use dual-ported RAM (DPRAM) when the readers and writers are different devices. == Description == === Double buffering Petri net === The Petri net in the illustration shows double buffering. Transitions W1 and W2 represent writing to buffer 1 and 2 respectively while R1 and R2 represent reading from buffer 1 and 2 respectively. At the beginning, only the transition W1 is enabled. After W1 fires, R1 and W2 are both enabled and can proceed in parallel. When they finish, R2 and W1 proceed in parallel and so on. After the initial transient where W1 fires alone, this system is periodic and the transitions are enabled – always in pairs (R1 with W2 and R2 with W1 respectively). == Double buffering in computer graphics == In computer graphics, double buffering is a technique for drawing graphics that shows less stutter, tearing, and other artifacts. It is difficult for a program to draw a display so that pixels do not change more than once. For instance, when updating a page of text, it is much easier to clear the entire page and then draw the letters than to somehow erase only the pixels that are used in old letters but not in new ones. However, this intermediate image is seen by the user as flickering. In addition, computer monitors constantly redraw the visible video page (traditionally at around 60 times a second), so even a perfect update may be visible momentarily as a horizontal divider between the "new" image and the un-redrawn "old" image, known as tearing. === Software double buffering === A software implementation of double buffering has all drawing operations store their results in some region of system RAM; any such region is often called a "back buffer". When all drawing operations are considered complete, the whole region (or only the changed portion) is copied into the video RAM (the "front buffer"); this copying is usually synchronized with the monitor's raster beam in order to avoid tearing. Software implementations of double buffering necessarily require more memory and CPU time than single buffering because of the system memory allocated for the back buffer, the time for the copy operation, and the time waiting for synchronization. Compositing window managers often combine the "copying" operation with "compositing" used to position windows, transform them with scale or warping effects, and make portions transparent. Thus, the "front buffer" may contain only the composite image seen on the screen, while there is a different "back buffer" for every window containing the non-composited image of the entire window contents. === Page flipping === In the page-flip method, instead of copying the data, both buffers are capable of being displayed. At any one time, one buffer is actively being displayed by the monitor, while the other, background buffer is being drawn. When the background buffer is complete, the roles of the two are switched. The page-flip is typically accomplished by modifying a hardware register in the video display controller—the value of a pointer to the beginning of the display data in the video memory. The page-flip is much faster than copying the data and can guarantee that tearing will not be seen as long as the pages are switched over during the monitor's vertical blanking interval—the blank period when no video data is being drawn. The currently active and visible buffer is called the front buffer, while the background page is called the back buffer. == Triple buffering == In computer graphics, triple buffering is similar to double buffering but can provide improved performance. In double buffering, the program must wait until the finished drawing is copied or swapped before starting the next drawing. This waiting period could be several milliseconds during which neither buffer can be touched. In triple buffering, the program has two back buffers and can immediately start drawing in the one that is not involved in such copying. The third buffer, the front buffer, is read by the graphics card to display the image on the monitor. Once the image has been sent to the monitor, the front buffer is flipped with (or copied from) the back buffer holding the most recent complete image. Since one of the back buffers is always complete, the graphics card never has to wait for the software to complete. Consequently, the software and the graphics card are completely independent and can run at their own pace. Finally, the displayed image was started without waiting for synchronization and thus with minimum lag. Due to the software algorithm not polling the graphics hardware for monitor refresh events, the algorithm may continuously draw additional frames as fast as the hardware can render them. For frames that are completed much faster than interval between refreshes, it is possible to replace a back buffers' frames with newer iterations multiple times before copying. This means frames may be written to the back buffer that are never used at all before being overwritten by successive frames. Nvidia has implemented this method under the name "Fast Sync". An alternative method sometimes referred to as triple buffering is a swap chain three buffers long. After the program has drawn both back buffers, it waits until the first one is placed on the screen, before drawing another back buffer (i.e. it is a 3-long first in, first out queue). Most Windows games seem to refer to this method when enabling triple buffering. == Quad buffering == The term quad buffering is the use of double buffering for each of the left and right eye images in stereoscopic implementations, thus four buffers total (if triple buffering was used then there would be six buffers). The command to swap or copy the buffer typically applies to both pairs at once, so at no time does one eye see an older image than the other eye. Quad buffering requires special support in the graphics card drivers which is disabled for most consumer cards. AMD's Radeon HD 6000 Series and newer support it. 3D standards like OpenGL and Direct3D support quad buffering. == Double buffering for DMA == The term double buffering is used for copying data between two buffers for direct memory access (DMA) transfers, not for enhancing performance, but to meet specific addressing requirements of a device (particularly 32-bit devices on systems with wider addressing provided via Physical Address Extension). Windows device drivers are a place where the term "double buffering" is likely to be used. Linux and BSD source code calls these "bounce buffers". Some programmers try to avoid this kind of double buffering with zero-copy techniques. == Other uses == Double buffering is also used as a technique to facilitate interlacing or deinterlacing of video signals.
Read more →
Cloud-based quantum computing

Cloud-based quantum computing refers to the remote access of quantum computing resources—such as quantum emulators, simulators, or processors—via the internet. Cloud access enables users to develop, test, and execute quantum algorithms without the need for direct interaction with specialized hardware, facilitating broader participation in quantum software development and experimentation. In 2016, IBM launched the IBM Quantum Experience, one of the first publicly accessible quantum processors connected to the cloud. In early 2017, researchers at Rigetti Computing demonstrated programmable quantum cloud access through their software platform Forest, which included the pyQuil Python library. Since the early-2020s, cloud-based quantum computing has grown significantly, with multiple providers offering access to a variety of quantum hardware modalities, including superconducting qubits, trapped ions, neutral atoms, and photonic systems. Major platforms such as Amazon Braket, Azure Quantum, and qBraid aggregate quantum devices from hardware developers like IonQ, Rigetti Computing, QuEra, Pasqal, Oxford Quantum Circuits, and IBM Quantum. These platforms provide unified interfaces for users to write and execute quantum algorithms across diverse backends, often supporting open-source SDKs such as Qiskit, Cirq, and PennyLane. The proliferation of cloud-based access has played a key role in accelerating quantum education, algorithm research, and early-stage application development by lowering the barrier to experimentation with real quantum hardware. Cloud-based quantum computing has expanded access to quantum hardware and tools beyond traditional research laboratories. These platforms support educational initiatives, algorithm development, and early-stage commercial applications. == Applications == Cloud-based quantum computing is used across education, research, and software development, offering remote access to quantum systems without the need for on-site infrastructure. === Education === Quantum cloud platforms have become valuable tools in education, allowing students and instructors to engage with real quantum processors through user-friendly interfaces. Educators use these platforms to teach foundational concepts in quantum mechanics and quantum computing, as well as to demonstrate and implement quantum algorithms in a classroom or laboratory setting. === Scientific Research === Cloud-based access to quantum hardware has enabled researchers to conduct experiments in quantum information, test quantum algorithms, and compare quantum hardware platforms. Experiments such as testing Bell's theorem or evaluating quantum teleportation protocols have been performed on publicly available quantum processors. === Software Development and Prototyping === Developers use cloud-based platforms to prototype quantum software applications across fields such as optimization, machine learning, and chemistry. These platforms offer SDKs and APIs that integrate classical and quantum workflows, enabling experimentation with quantum algorithms in real-world or simulated environments. === Public Engagement and Games === Quantum cloud tools have also been used to create educational games and interactive applications aimed at increasing public understanding of quantum concepts. These efforts help bridge the gap between theoretical content and intuitive learning. == Existing platforms == qBraid Lab by qBraid is a cloud-based platform for quantum computing. It provides software tools for researchers and developers in quantum, as well as access to quantum hardware. qBraid provides cloud based access to Microsoft Azure Quantum and Amazon Braket devices including IQM, QuEra, Pasqal, Rigetti, IonQ, QIR simulators, Amazon Braket simulators, and the NEC Vector Annealer, as of August 2025. qBraid's base version is free, where unlimited hardware and simulator access is available with the purchase of credits. Quandela Cloud by Quandela is the platform to access first cloud-accessible European photonic quantum computer. The computer is interfaced using the Perceval scripting language, with tutorials and documentation available online for free. Xanadu Quantum Cloud by Xanadu is a platform with cloud-based access to three fully programmable photonic quantum computers. Forest by Rigetti Computing is a tool suite for cloud-based quantum computing. It includes a programming language, development tools and example algorithms. LIQUi> by Microsoft is a software architecture and tool suite for quantum computing. It includes a programming language, example optimization and scheduling algorithms, and quantum simulators. Q#, a quantum programming language by Microsoft on the .NET Framework seen as a successor to LIQUi|>. IBM Quantum Platform by IBM, providing access to quantum hardware as well as HPC simulators. These can be accessed programmatically using the Python-based Qiskit framework, or via graphical interface with the IBM Q Experience GUI. Both are based on the OpenQASM standard for representing quantum operations. There is also a tutorial and online community. Quantum in the Cloud by The University of Bristol, which consists of a quantum simulator and a four qubit optical quantum system. Quantum Playground by Google is an educational resource which features a simulator with a simple interface, and a scripting language and 3D quantum state visualization. Quantum in the Cloud is an experimental quantum cloud platform for access to a four-qubit nuclear magnetic resonance-NMRCloudQ computer, managed by Tsinghua University. Quantum Inspire by Qutech is the first platform in Europe providing cloud-based quantum computing to two hardware chips. Next to a 5-qubit transmon processor, Quantum Inspire is the first platform in the world to provide online access to a fully programmable 2-qubit electron spin quantum processor. Amazon Braket is a cloud-based quantum computing platform hosted by AWS which, as of June 2025, provides access to quantum computers built by IonQ, Rigetti, IQM, and QuEra. Braket also provides a quantum algorithm development environment and simulator. Forge by QC Ware is a cloud-based quantum computing platform that provides access to D-Wave hardware, as well as Google and IBM simulators. The platform offers a 30-day free trial, including one minute of quantum computing time. Quantum-as-a-Service by Scaleway is a cloud-based platform created in 2022 to access to real quantum hardware from IQM Quantum Computers, Alpine Quantum Technologies, Quandela and Pasqal. It also include access to GPU-powered emulators such as Aer, Qsim and Quandela proprietary emulation.
Read more →
Articulatory speech recognition

Articulatory speech recognition means the recovery of speech (in forms of phonemes, syllables or words) from acoustic signals with the help of articulatory modeling or an extra input of articulatory movement data. Speech recognition (or automatic speech recognition, acoustic speech recognition) means the recovery of speech from acoustics (sound wave) only. Articulatory information is extremely helpful when the acoustic input is in low quality, perhaps because of noise or missing data. Measurable information from the articulatory system (e.g. tongue, jaw movements) can supplement acoustic signals to improve phone recognition accuracy by 2%. However, attempts to estimate articulatory data from acoustic signals alone have not significantly enhanced recognition performance.
Read more →
Semi-automation

Semi-automation is a process or procedure that is performed by the combined activities of man and machine with both human and machine steps typically orchestrated by a centralized computer controller. Within manufacturing, production processes may be fully manual, semi-automated, or fully automated. In this case, semi-automation may vary in its degree of manual and automated steps. Semi-automated manufacturing processes are typically orchestrated by a computer controller which sends messages to the worker at the time in which he/she should perform a step. The controller typically waits for feedback that the human performed step has been completed via either a human-machine interface or via electronic sensors distributed within the process. Controllers within semi-automated processes may either directly control machinery or send signals to machinery distributed within the process. Centralized computer controllers within semi-automated processes orchestrate processes by instructing the worker, providing electronic communication and control to process equipment, tools, or machines, as well as perform data management to record and ensure that the process meets established process criteria. Many manufacturers choose not to fully automate a process, and instead implement semi-automation due to the complexity of the task, or the number of products produced is too low to justify the investment in full automation. Other processes may not be fully automated because it may reduce the flexibility to easily adapt the processes to reflect production needs.
Read more →
AdBlock

AdBlock is an ad-blocking browser extension for Google Chrome, Apple Safari (desktop and mobile), Firefox, Samsung Internet, Microsoft Edge and Opera. AdBlock allows users to prevent page elements, such as advertisements, from being displayed. It is free to download and use, and it includes optional donations to the developers. The AdBlock extension was created on December 8, 2009, which is the day that supports for extensions was added to Google Chrome. It was one of the first Google Chrome extensions that was made. Since 2016, AdBlock has been based on the Adblock Plus source code. In July 2018, AdBlock acquired uBlock, a commercial ad-blocker owned by uBlock LLC and based on uBlock Origin. In April 2021, eyeo GmbH (developer of Adblock Plus) announced its purchase of AdBlock, Inc (formerly BetaFish, Inc). == Crowdfunding == Gundlach launched a crowdfunding campaign on Crowdtilt in August 2013 in order to fund an ad campaign to raise awareness of ad-blocking and to rent a billboard at Times Square. After the one-month campaign, it raised $55,000. == Sales and acceptable ads == AdBlock was sold to an anonymous buyer in 2015 and on October 15, 2015, Gundlach's name was taken down from the site. In the terms of the deal, the original developer Michael Gundlach left operations to Adblock's continuing director, Gabriel Cubbage, and as of October 2, 2015, AdBlock began participating in the Acceptable Ads program. Acceptable Ads identifies "non-annoying" ads, which AdBlock shows by default. The intent is to allow non-invasive advertising, to either maintain support for websites that rely on advertising as a main source of revenue or for websites that have an agreement with the program. == Filters == AdBlock uses EasyList, the same filter syntax as Adblock Plus for Firefox, and natively supports the use of a number of filter lists. == Partnership with Amnesty International == On March 12, 2016, in support of World Day Against Cyber Censorship, and in partnership with Amnesty International, instead of blocking ads, AdBlock replaced ads with banners linked to articles on Amnesty's website, written by prominent free speech advocates such as Edward Snowden, to raise awareness of government-imposed online censorship and digital privacy issues around the world. The campaign was met with both praise and criticism, with AdBlock's CEO, Gabriel Cubbage, defending the decision in an essay on AdBlock's website, saying "We’re showing you Amnesty banners, just for today, because we believe users should be part of the conversation about online privacy. Tomorrow, those spaces will be vacant again. But take a moment to consider that in an increasingly information-driven world, when your right to digital privacy is threatened, so is your right to free expression." Meanwhile, Simon Sharwood of The Register characterized Cubbage's position as "'You should control your computer except when we feel political', says AdBlock CEO". == AdBlock for Firefox == On September 13, 2014, the AdBlock team released a version for Firefox users, ported from the code for Google Chrome, released under the same free software license as the original Adblock. The extension was removed on April 2, 2015, by an administrator on Mozilla Add-ons. On December 7, 2015, the official AdBlock site's knowledge base article stated that with version 44 or higher of Firefox desktop and Firefox Mobile, AdBlock will not be supported. The last version of Adblock for those platforms will work on older versions of Firefox. AdBlock was released again on Mozilla Add-ons on November 17, 2016. On April 1, 2012, Adblock developer Michael Gundlach tweaked the code to display LOLcats instead of simply blocking ads. Initially developed as a short-lived April Fools joke, the response was so positive that CatBlock was continued to be offered as an optional add-on supported by a monthly subscription. On October 23, 2014, the developer decided to end official support for CatBlock, and made it open-source, under GPLv3 licensing, as the original extension.
Read more →
Workplace impact of artificial intelligence

The impact of artificial intelligence on workers includes both applications to improve worker safety and health, and potential hazards that must be controlled. One potential application is using AI to eliminate hazards by removing humans from hazardous situations that involve risk of stress, overwork, or musculoskeletal injuries. Predictive analytics may also be used to identify conditions that may lead to hazards such as fatigue, repetitive strain injuries, or toxic substance exposure, leading to earlier interventions. Another is to streamline workplace safety and health workflows through automating repetitive tasks, enhancing safety training programs through virtual reality, or detecting and reporting near misses. When used in the workplace, AI also presents the possibility of new hazards. These may arise from machine learning techniques leading to unpredictable behavior and inscrutability in their decision-making, or from cybersecurity and information privacy issues. Many hazards of AI are psychosocial due to its potential to cause changes in work organization. These include increased monitoring leading to micromanagement, algorithms unintentionally or intentionally mimicking undesirable human biases, and assigning blame for machine errors to the human operator instead. AI may also lead to physical hazards in the form of human–robot collisions, and ergonomic risks of control interfaces and human–machine interactions. Hazard controls include cybersecurity and information privacy measures, communication and transparency with workers about data usage, and limitations on collaborative robots. From a workplace safety and health perspective, only "weak" or "narrow" AI that is tailored to a specific task is relevant, as there are many examples that are currently in use or expected to come into use in the near future. Certain digital technologies are predicted to result in job losses. Starting in the 2020s, the adoption of modern robotics has led to net employment growth. However, many businesses anticipate that automation, or employing robots would result in job losses in the future. This is especially true for companies in Central and Eastern Europe. Other digital technologies, such as platforms or big data, are projected to have a more neutral impact on employment. A large number of tech workers have been laid off starting in 2023; many such job cuts have been attributed to artificial intelligence. == Health and safety applications == In order for any potential AI health and safety application to be adopted, it requires acceptance by both managers and workers. For example, worker acceptance may be diminished by concerns about information privacy, or from a lack of trust and acceptance of the new technology, which may arise from inadequate transparency or training. Alternatively, managers may emphasize increases in economic productivity rather than gains in worker safety and health when implementing AI-based systems. === Eliminating hazardous tasks === AI may increase the scope of work tasks where a worker can be removed from a situation that carries risk. In a sense, while traditional automation can replace the functions of a worker's body with a robot, AI effectively replaces the functions of their brain with a computer. Hazards that can be avoided include stress, overwork, musculoskeletal injuries, and boredom. This can expand the range of affected job sectors into white-collar and service sector jobs such as in medicine, finance, and information technology. === Analytics to reduce risk === Machine learning is used for people analytics to make predictions about worker behavior to assist management decision-making, such as hiring and performance assessment. These could also be used to improve worker health. The analytics may be based on inputs such as online activities, monitoring of communications, location tracking, and voice analysis and body language analysis of filmed interviews. For example, sentiment analysis may be used to spot fatigue to prevent overwork. Decision support systems have a similar ability to be used to, for example, prevent industrial disasters or make disaster response more efficient. For manual material handling workers, predictive analytics and artificial intelligence may be used to reduce musculoskeletal injury. Traditional guidelines are based on statistical averages and are geared towards anthropometrically typical humans. The analysis of large amounts of data from wearable sensors may allow real-time, personalized calculation of ergonomic risk and fatigue management, as well as better analysis of the risk associated with specific job roles. Wearable sensors may also enable earlier intervention against exposure to toxic substances than is possible with area or breathing zone testing on a periodic basis. Furthermore, the large data sets generated could improve workplace health surveillance, risk assessment, and research. === Streamlining safety and health workflows === AI has also been used to attempt to make the workplace safety and health workflow more efficient. One example is coding of workers' compensation claims, which are submitted in a prose narrative form and must manually be assigned standardized codes. AI is being investigated to perform this task faster, more cheaply, and with fewer errors. == Hazards == There are several broad aspects of AI that may give rise to specific hazards. The risks depend on implementation rather than the mere presence of AI. Systems using sub-symbolic AI such as machine learning may behave unpredictably and are more prone to inscrutability in their decision-making. This is especially true if a situation is encountered that was not part of the AI's training dataset, and is exacerbated in environments that are less structured. Undesired behavior may also arise from flaws in the system's perception (arising either from within the software or from sensor degradation), knowledge representation and reasoning, or from software bugs. They may arise from improper training, such as a user applying the same algorithm to two problems that do not have the same requirements. Machine learning applied during the design phase may have different implications than that applied at runtime. Systems using symbolic AI are less prone to unpredictable behavior. The use of AI also increases cybersecurity risks relative to platforms that do not use AI, and information privacy concerns about collected data may pose a hazard to workers. === Psychosocial === Psychosocial hazards are those that arise from the way work is designed, organized, and managed, or its economic and social contexts, rather than arising from a physical substance or object. They cause not only psychiatric and psychological outcomes such as occupational burnout, anxiety disorders, and depression, but they can also cause physical injury or illness such as cardiovascular disease or musculoskeletal injury. Many hazards of AI are psychosocial in nature due to its potential to cause changes in work organization, in terms of increasing complexity and interaction between different organizational factors. However, psychosocial risks are often overlooked by designers of advanced manufacturing systems. Einola and Khoreva explore how different organizational groups perceive and interact with AI technologies. Their research shows that successful AI integration depends on human ownership and contextual understanding. They caution against blind technological optimism and stress the importance of tailoring AI use to specific workplace ecosystems. This perspective reinforces the need for inclusive design and transparent implementation strategies. ==== Changes in work practices ==== Over-reliance on AI tools may lead to deskilling of some professions. When AI becomes a substitute for traditional peer collaboration and mentorship, there is a risk of diminishing opportunities for interpersonal skill development and team-based learning. Increased monitoring may lead to micromanagement and thus to stress and anxiety. A perception of surveillance may also lead to stress. Controls for these include consultation with worker groups, extensive testing, and attention to introduced bias. Wearable sensors, activity trackers, and augmented reality may also lead to stress from micromanagement, both for assembly line workers and gig workers. Gig workers also lack the legal protections and rights of formal workers. Newell & Marabelli argue that AI alters power dynamics and employee autonomy, requiring a more nuanced understanding of its social and organizational implications. There is also the risk of people being forced to work at a robot's pace, or to monitor robot performance at nonstandard hours. A 2025 preprint paper based on users' interactions with the AI chatbot Microsoft Copilot identified forty jobs that the author's claimed had high overlaps with the capabilities of AI. Some media outlets used this paper to report on jobs becoming obsolete. Cri
Read more →
Richardson–Lucy deconvolution

The Richardson–Lucy algorithm, also known as Lucy–Richardson deconvolution, is an iterative procedure for recovering an underlying image that has been blurred by a known point spread function. It was named after William Richardson and Leon B. Lucy, who described it independently. == Description == When an image is produced using an optical system and detected using photographic film, a charge-coupled device or a CMOS sensor, for example, it is inevitably blurred, with an ideal point source not appearing as a point but being spread out into what is known as the point spread function. Extended sources can be decomposed into the sum of many individual point sources, thus the observed image can be represented in terms of a transition matrix p operating on an underlying image: d i = ∑ j p i , j u j , {\displaystyle d_{i}=\sum _{j}p_{i,j}u_{j},} where u j {\displaystyle u_{j}} is the intensity of the underlying image at pixel j {\displaystyle j} , and d i {\displaystyle d_{i}} is the detected intensity at pixel i {\displaystyle i} . In general, a matrix whose elements are p i , j {\displaystyle p_{i,j}} describes the portion of light from source pixel j that is detected in pixel i. In most good optical systems (or in general, linear systems that are described as shift-invariant) the transfer function p can be expressed simply in terms of the spatial offset between the source pixel j and the observation pixel i: p i , j = P ( i − j ) , {\displaystyle p_{i,j}=P(i-j),} where P ( Δ i ) {\displaystyle P(\Delta i)} is called a point spread function. In that case the above equation becomes a convolution. This has been written for one spatial dimension, but most imaging systems are two-dimensional, with the source, detected image, and point spread function all having two indices. So a two-dimensional detected image is a convolution of the underlying image with a two-dimensional point spread function P ( Δ x , Δ y ) {\displaystyle P(\Delta x,\Delta y)} plus added detection noise. In order to estimate u j {\displaystyle u_{j}} given the observed d i {\displaystyle d_{i}} and a known P ( Δ i x , Δ j y ) {\displaystyle P(\Delta i_{x},\Delta j_{y})} , the following iterative procedure is employed in which the estimate of u j {\displaystyle u_{j}} (called u ^ j ( t ) {\displaystyle {\hat {u}}_{j}^{(t)}} ) for iteration number t is updated as follows: u ^ j ( t + 1 ) = u ^ j ( t ) ∑ i d i c i p i j , {\displaystyle {\hat {u}}_{j}^{(t+1)}={\hat {u}}_{j}^{(t)}\sum _{i}{\frac {d_{i}}{c_{i}}}p_{ij},} where c i = ∑ j p i j u ^ j ( t ) , {\displaystyle c_{i}=\sum _{j}p_{ij}{\hat {u}}_{j}^{(t)},} and ∑ j p i j = 1 {\displaystyle \sum _{j}p_{ij}=1} is assumed. It has been shown empirically that if this iteration converges, it converges to the maximum likelihood solution for u j {\displaystyle u_{j}} . Writing this more generally for two (or more) dimensions in terms of convolution with a point spread function P: u ^ ( t + 1 ) = u ^ ( t ) ⋅ ( d u ^ ( t ) ⊗ P ⊗ P ∗ ) , {\displaystyle {\hat {u}}^{(t+1)}={\hat {u}}^{(t)}\cdot \left({\frac {d}{{\hat {u}}^{(t)}\otimes P}}\otimes P^{}\right),} where the division and multiplication are element-wise, ⊗ {\displaystyle \otimes } indicates a 2D convolution, and P ∗ {\displaystyle P^{}} is the mirrored point spread function, or the inverse Fourier transform of the Hermitian transpose of the optical transfer function. In problems where the point spread function p i j {\displaystyle p_{ij}} is not known a priori, a modification of the Richardson–Lucy algorithm has been proposed, in order to accomplish blind deconvolution. == Derivation == In the context of fluorescence microscopy, the probability of measuring a set of number of photons (or digitalization counts proportional to detected light) m = [ m 0 , … , m K ] {\displaystyle \mathbf {m} =[m_{0},\dots ,m_{K}]} for expected values E = [ E 0 , … , E K ] {\displaystyle \mathbf {E} =[E_{0},\dots ,E_{K}]} for a detector with K + 1 {\displaystyle K+1} pixels is given by P ( m ∣ E ) = ∏ i K Poisson ⁡ ( E i ) = ∏ i K E i m i e − E i m i ! . {\displaystyle P(\mathbf {m} \mid \mathbf {E} )=\prod _{i}^{K}\operatorname {Poisson} (E_{i})=\prod _{i}^{K}{\frac {E_{i}^{m_{i}}e^{-E_{i}}}{m_{i}!}}.} Since in the context of maximum-likelihood estimation the aim is to locate the maximum of the likelihood function without concern for its absolute value, it is convenient to work with ln ⁡ ( P ) {\displaystyle \ln(P)} : ln ⁡ P ( m ∣ E ) = ∑ i K [ ( m i ln ⁡ E i − E i ) − ln ⁡ ( m i ! ) ] . {\displaystyle \ln P(\mathbf {m} \mid \mathbf {E} )=\sum _{i}^{K}[(m_{i}\ln E_{i}-E_{i})-\ln(m_{i}!)].} Moreover, since ln ⁡ ( m i ! ) {\displaystyle \ln(m_{i}!)} is a constant, it does not give any additional information regarding the position of the maximum, so consider α ( m ∣ E ) = ∑ i K [ m i ln ⁡ E i − E i ] , {\displaystyle \alpha (\mathbf {m} \mid \mathbf {E} )=\sum _{i}^{K}[m_{i}\ln E_{i}-E_{i}],} where α {\displaystyle \alpha } is something that shares the same maximum position as P ( m ∣ E ) {\displaystyle P(\mathbf {m} \mid \mathbf {E} )} . Now consider that E {\displaystyle \mathbf {E} } comes from a ground truth x {\displaystyle \mathbf {x} } and a measurement H {\displaystyle \mathbf {H} } which is assumed to be linear. Then E = H x , {\displaystyle \mathbf {E} =\mathbf {H} \mathbf {x} ,} where a matrix multiplication is implied. This can also be written in the form E m = ∑ n K H m n x n , {\displaystyle E_{m}=\sum _{n}^{K}H_{mn}x_{n},} where it can be seen how H {\displaystyle H} mixes or blurs the ground truth. It can also be shown that the derivative of an element of E {\displaystyle \mathbf {E} } , ( E i ) {\displaystyle (E_{i})} with respect to some other element of x j {\displaystyle x_{j}} can be written as It is easy to see this by writing a matrix H {\displaystyle \mathbf {H} } of, say, 5 × 5 and two arrays E {\displaystyle \mathbf {E} } and x {\displaystyle \mathbf {x} } of 5 elements and check it. This last equation can be interpreted as how much one element of x {\displaystyle \mathbf {x} } , say element i {\displaystyle i} , influences the other elements j ≠ i {\displaystyle j\neq i} (and of course the case i = j {\displaystyle i=j} is also taken into account). For example, in a typical case an element of the ground truth x {\displaystyle \mathbf {x} } will influence nearby elements in E {\displaystyle \mathbf {E} } but not the very distant ones (a value of 0 {\displaystyle 0} is expected on those matrix elements). Now, the key and arbitrary step: x {\displaystyle \mathbf {x} } is not known but may be estimated by x ^ {\displaystyle {\hat {\mathbf {x} }}} . Let's call x ^ old {\displaystyle {\hat {\mathbf {x} }}_{\text{old}}} and x ^ new {\displaystyle {\hat {\mathbf {x} }}_{\text{new}}} the estimated ground truths while using the RL algorithm, where the hat symbol is used to distinguish ground truth from estimator of the ground truth where ∂ ∂ x {\displaystyle {\frac {\partial }{\partial \mathbf {x} }}} stands for a K {\displaystyle K} -dimensional gradient. Performing the partial derivative of α ( m ∣ E ( x ) ) {\displaystyle \alpha (\mathbf {m} \mid \mathbf {E} (\mathbf {x} ))} yields the following expression: ∂ α ( m ∣ E ( x ) ) ∂ x j = ∂ ∂ x j ∑ i K [ m i ln ⁡ E i − E i ] = ∑ i K [ m i E i ∂ ∂ x j E i − ∂ ∂ x j E i ] = ∑ i K ∂ E i ∂ x j [ m i E i − 1 ] . {\displaystyle {\frac {\partial \alpha (\mathbf {m} \mid \mathbf {E} (\mathbf {x} ))}{\partial x_{j}}}={\frac {\partial }{\partial x_{j}}}\sum _{i}^{K}[m_{i}\ln E_{i}-E_{i}]=\sum _{i}^{K}\left[{\frac {m_{i}}{E_{i}}}{\frac {\partial }{\partial x_{j}}}E_{i}-{\frac {\partial }{\partial x_{j}}}E_{i}\right]=\sum _{i}^{K}{\frac {\partial E_{i}}{\partial x_{j}}}\left[{\frac {m_{i}}{E_{i}}}-1\right].} By substituting (1), it follows that ∂ α ( m ∣ E ( x ) ) ∂ x j = ∑ i K H i j [ m i E i − 1 ] . {\displaystyle {\frac {\partial \alpha (\mathbf {m} \mid \mathbf {E} (\mathbf {x} ))}{\partial x_{j}}}=\sum _{i}^{K}H_{ij}\left[{\frac {m_{i}}{E_{i}}}-1\right].} Note that H j i T = H i j {\displaystyle H_{ji}^{T}=H_{ij}} by the definition of a matrix transpose. And hence Since this equation is true for all j {\displaystyle j} spanning all the elements from 1 {\displaystyle 1} to K {\displaystyle K} , these K {\displaystyle K} equations may be compactly rewritten as a single vectorial equation ∂ α ( m ∣ E ( x ) ) ∂ x = H T [ m E − 1 ] , {\displaystyle {\frac {\partial \alpha (\mathbf {m} \mid \mathbf {E} (\mathbf {x} ))}{\partial \mathbf {x} }}=\mathbf {H} ^{T}\left[{\frac {\mathbf {m} }{\mathbf {E} }}-\mathbf {1} \right],} where H T {\displaystyle \mathbf {H} ^{T}} is a matrix, and m {\displaystyle \mathbf {m} } , E {\displaystyle \mathbf {E} } and 1 {\displaystyle \mathbf {1} } are vectors. Now, as a seemingly arbitrary but key step, let where 1 {\displaystyle \mathbf {1} } is a vector of ones of size K {\displaystyle K} (same as m {\displaystyle \mathbf {m} } , E {\displaystyle \mathbf {E} } and x {\displaystyle \mathbf {x} } ), and the d
Read more →
Layers (digital image editing)

Layers are used in digital image editing to separate different elements of an image. A layer can be compared to a transparency on which imaging effects or images are applied and placed over or under an image. Today they are an integral feature of image editors. In the early days of computing, memory was at a premium and the idea of using multi-layered images was considered infeasible in personal computer applications as the tradeoffs were image size and color depth. As the price of memory fell it became feasible to apply the concept of layering to raster images. The first software known to apply the concept of layers was LALF, which was released in 1989 for the NEC PC-9801. LALF's terminology for layers is "cells", after the concept of drawing animation frames over-top of a stencil. Layers were introduced in Western markets by Fauve Matisse (later Macromedia xRes), and then available in Adobe Photoshop 3.0, in 1994, which lead to widespread adoption. In vector image editors that support animation, layers are used to further enable manipulation along a common timeline for the animation; in SVG images, the equivalent to layers are "groups". == Layer types == There are different kinds of layers, and not all of them exist in all programs. They represent a part of a picture, either as pixels or as modification instructions. They are stacked on top of each other, and depending on the order, determine the appearance of the final picture. In graphics software, layers are the different levels at which one can place an object or image file. In the program, layers can be stacked, merged, or defined when creating a digital image. Layers can be partially obscured allowing portions of images within a layer to be hidden or shown in a translucent manner within another image. Layers can also be used to combine two or more images into a single digital image. For the purpose of editing, working with layers allows for applying changes to just one specific layer. == Layer (basic) == The standard layer available to most programs consists of a rectangular, semitransparent picture which may be superimposed over other layers. Some programs require that layers cover the same area as the final canvas, but others offer layers of multiple sizes. Each layer may bear individual settings, such as opacity, blending modes, dynamic filters, and potentially hundreds of other properties. == Layer mask == A layer mask is linked to a layer and hides part of the layer from the picture. What is painted black on the layer mask will not be visible in the final picture. What is grey will be more or less transparent depending on the shade of grey. As the layer mask can be both edited and moved around independently of both the background layer and the layer it applies to, it gives the user the ability to test a lot of different combinations of overlay. == Adjustment layer == An adjustment layer typically applies a common effect like brightness or saturation to other layers. However, as the effect is stored in a separate layer, it is easy to try it out and switch between different alternatives, without changing the original layer. In addition, an adjustment layer can easily be edited, just like a layer mask, so an effect can be applied to just part of the image.
Read more →