AI Data Integration

AI Data Integration — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Automatic scorer

  An automatic scorer is the computerized scoring system to keep track of scoring in ten-pin bowling. It was introduced en masse in bowling alleys in the 1970s and combined with mechanical pinsetters to detect overturned pins. By eliminating the need for manual score-keeping, these systems have introduced new bowlers into the game who otherwise would not participate because they had to count the score themselves, as many do not understand the mathematical formula involved in bowler scoring. At first, people were skeptical about whether a computer could keep an accurate score. In the twenty-first century, automatic scorers are used in most bowling centers around the world. The three manufacturers of these specialty computers have been Brunswick Bowling, AMF Bowling (later QubicaAMF), and RCA. == History == Automatic equipment is considered a cornerstone of the modern bowling center. The traditional bowling center of the early 20th century was advanced in automation when the pinsetter person ("pin boy"), who set back up by hand the bowled down pins, was replaced by a machine that automatically replaced the pins in their proper play positions. This machine came out in the 1950s. A detection system was developed from the pinsetter mechanism in the 1960s that could tell which pins had been knocked down, and that information could be transferred to a digital computer. Automatic electronic scoring was first conceived by Robert Reynolds, who was described by a newspaper story at the time as "a West Coast electronics calculator expert." He worked with the technical staff of Brunswick Bowling to develop it. The goal was realized in the late 1960s when a specialized computer was designed for the purpose of automatic scorekeeping for bowling. The field test for the automatic scorer took place at Village Lanes bowling center, Chicago in 1967. The scoring machine received approval for official use by the American Bowling Congress in August of that year. They were first used in national official league gaming on October 10, 1967. In November, Brunswick announced that they were accepting orders for the new digital computer, which cost around $3,000 per bowling lane. Bowling centers that installed these new automatic scoring devices in the 1970s charged a ten cents extra per line of scoring for the convenience. == Description == Each Automatic Scorer computer unit kept score for four lanes. It had two bowler identification panels serving two lanes each. The bowler pushed it into his named position when his turn came up so the computer knew who was bowling and score accordingly. After the bowler rolled the bowling ball down the lane and knocked down pins, the pinsetter detected which pins were down and relayed this information back to the computer for scoring. The result was then printed on a scoresheet and projected overhead onto a large screen for all to see. The Automatic Scorer digital computer was mathematically accurate, however the detection system at the pinsetter mechanism sometimes reported the wrong number of pins knocked down. The computer could be corrected manually for any errors in the system; similarly, human errors, such as neglecting to move the bowler identification mechanism, could be corrected for by manual action. The scorer could take into account bowlers' handicaps and could adjust for late-arriving bowlers. The automatic scorer is directly connected to the foul detection unit. As a result, foul line violations are automatically scored. Brunswick had put ten years of research and development into the Automatic Scorer, and by 1972 there were over 500 of these computers installed in bowling centers around the world. AMF Bowling, competitor to Brunswick, entered into the automatic scorer computer field during the 1970s and their systems were installed into their brand of bowling centers. By 1974, RCA was also making these computers for automatic scoring. == Reception and further developments == The purposes of the computerized scoring were to avoid errors by human scorers and to prevent cheating. It had the side benefit of speeding up the progress of the game and introducing new bowlers to the game. Score-keeping for bowling is based on a formula that many new to bowling were not familiar with and thought difficult to learn. These casual bowlers unfamiliar with the formula thought the scores given by the computers were confusing. Some bowlers were not comfortable with automatic scorers when they were introduced in the 1970s, so kept score using the traditional method on paper score sheets. The introduction of this device increased the popularity of the sport. Automatic scorers came to be considered a normal part of modern bowling installations worldwide, with owners and managers saying that bowlers expect such equipment to be present in bowling establishments and that business increased following their introduction. Brunswick introduced a color television style automatic scorer in 1983. Bowling center owners could use these style automatic scorers for advertising, management, videos, and live television. By the 2010s, these types of electronic visual displays could show bowler avatars and social media connections to publicize the bowlers' scores. Some are capable of being extended entertainment systems of games for children and adults. Some scoring systems support variations on traditional bowling, such as different kinds of bingo games where certain pins have to be knocked down at certain times or practice regimes where certain spares have to be accomplished. By this point, QubicaAMF Worldwide, an outgrowth of AMF, was one of the leading providers of bowling scoring equipment.

  Read more →
• 

  AI nationalism

  AI nationalism is the idea that nations should develop and control their own artificial intelligence technologies to advance their own interests and ensure technological sovereignty. This concept is gaining traction globally, leading countries to implement new laws, form strategic alliances, and invest significantly in domestic AI capabilities. == Global trends and national strategies == In 2018, British technology investor Ian Hogarth published an influential essay titled AI Nationalism. He argued that as AI gains more power and its economic and military significance expands, governments will take measures to bolster their own domestic AI industries, and predicted that the advancement of machine learning systems would lead to what he termed "AI nationalism." He anticipated that this rise in AI would accelerate a global arms race, resulting in more closed economies, restrictions on foreign acquisitions, and limitations on the movement of talent. Hogarth predicted that AI policy would become a central focus of government agendas. He also criticized Britain’s approach to AI strategy, citing the sale of London-based DeepMind—one of the leading AI laboratories, acquired by Google for a relatively modest £400 million in 2014—as a significant misstep. AI nationalism is chiefly reflected in the escalating rhetoric of an artificial intelligence arms race, portraying AI development as a zero-sum game where the winner gains significant economic, political, and military advantages. This mindset, as highlighted in a 2017 Pentagon report, warns that sharing AI technology could erode technological supremacy and enhance rivals' capabilities. The winner-takes-all mentality of AI nationalism poses risks including unsafe AI development, increased geopolitical tension, and potential military aggression (such as cyberattacks or targeting AI professionals). Several countries, including Canada, France, and India, have formulated national strategies to advance their positions in AI. In the United States, a leading player in the global AI arena, trade policies have been enacted to restrict China's access to critical microchips, reflecting a strategic effort to maintain a technological edge. The United States’ National Security Commission on Artificial Intelligence (NSCAI) frames AI development as a critical aspect of a broader technology competition crucial for national success. It emphasizes the need to outpace China in AI to maintain strategic advantage, reflecting AI nationalism by linking geopolitical power directly to advancements in AI. France has seen notable governmental support for local AI startups, particularly those specializing in language technologies that cater to French and other non-English languages. In Saudi Arabia, Crown Prince Mohammed bin Salman is investing billions in AI research and development. The country has actively collaborated with major technology firms such as Amazon, IBM, and Microsoft to establish itself as a prominent AI hub. == Historical and cultural context == AI nationalism is seen as deeply connected to historical racism and imperialism. It is viewed not merely as a technological competition but as a contest over racial and civilizational superiority. Historically, technological achievements were often used to justify colonialism and racial hierarchies, with Western societies perceiving their advancements as evidence of superiority. In the context of AI, this historical context continues to shape views on intelligence and development. Some argue that AI nationalism reinforces the idea of fundamental civilizational divides, especially between the Western world and China. This perspective often frames China's progress in AI as a direct challenge to Western values, presenting the AI competition as a struggle over values. AI nationalism is said to draw from long-standing anti-Asian stereotypes, such as the "Yellow Peril," which portray Asian nations as threats to Western civilization. This viewpoint links Asian technological advances with dehumanization and artificiality, reflecting persistent anxieties about China's growing role in the global tech landscape. == Implications == AI nationalism is seen as a component of a broader trend towards the fragmentation of the internet, where digital services are increasingly influenced by local regulations and national interests. This shift is creating a new technological landscape in which the impact of artificial intelligence on individuals' lives can vary significantly depending on their geographic location. J. Paul Goode argues that AI nationalism may exacerbate existing societal divisions by promoting the development of systems that embed cultural biases, thereby privileging certain groups while disadvantaging others.

  Read more →
• 

  Time series

  In mathematics, a time series is a sequence of data points indexed, listed, or graphed in chronological order. Most commonly, a time series consists of observations recorded at successive equally spaced points in time. Thus, it represents a form of discrete-time data. A time series may describe measurements collected over seconds, days, years, or even centuries. Common examples include heights of ocean tides, counts of sunspots, daily temperature readings, and the closing values of stock market indices such as the Dow Jones Industrial Average. A time series is often visualized using a run chart (a type of temporal line chart), which helps identify patterns such as trends, seasonal effects, and irregular fluctuations. Time series are widely used in statistics, actuarial science, signal processing, pattern recognition, econometrics, mathematical finance, weather forecasting, earthquake prediction, electroencephalography, control engineering, astronomy, communications engineering, and many other areas of applied science and engineering that involve temporal measurements. Time series analysis comprises methods for analyzing time series data in order to extract meaningful statistics and other characteristics of the data. Time series forecasting is the use of a model to predict future values based on previously observed values. Generally, time series data is modeled as a stochastic process. While regression analysis is often employed in such a way as to test relationships between one or more different time series, this type of analysis is not usually called "time series analysis", which refers in particular to relationships between different points in time within a single series. Time series data have a natural temporal ordering. This makes time series analysis distinct from cross-sectional studies, in which there is no natural ordering of the observations (e.g. explaining people's wages by reference to their respective education levels, where the individuals' data could be entered in any order). Time series analysis is also distinct from spatial data analysis where the observations typically relate to geographical locations (e.g. accounting for house prices by the location as well as the intrinsic characteristics of the houses). A stochastic model for a time series will generally reflect the fact that observations close together in time will be more closely related than observations further apart. In addition, time series models will often make use of the natural one-way ordering of time so that values for a given period will be expressed as deriving in some way from past values, rather than from future values (see time reversibility). Time series analysis can be applied to real-valued, continuous data, discrete numeric data, or discrete symbolic data (i.e. sequences of characters, such as letters and words in the English language). == Methods for analysis == Methods for time series analysis may be divided into two classes: frequency-domain methods and time-domain methods. The former include spectral analysis and wavelet analysis; the latter include auto-correlation and cross-correlation analysis. In the time domain, correlation and analysis can be made in a filter-like manner using scaled correlation, thereby mitigating the need to operate in the frequency domain. Additionally, time series analysis techniques may be divided into parametric and non-parametric methods. The parametric approaches assume that the underlying stationary stochastic process has a certain structure which can be described using a small number of parameters (for example, using an autoregressive or moving-average model). In these approaches, the task is to estimate the parameters of the model that describes the stochastic process. By contrast, non-parametric approaches explicitly estimate the covariance or the spectrum of the process without assuming that the process has any particular structure. Methods of time series analysis may also be divided into linear and non-linear, and univariate and multivariate. == Panel data == A time series is one type of panel data. Panel data is the general class, a multidimensional data set, whereas a time series data set is a one-dimensional panel (as is a cross-sectional dataset). A data set may exhibit characteristics of both panel data and time series data. One way to tell is to ask what makes one data record unique from the other records. If the answer is the time data field, then this is a time series data set candidate. If determining a unique record requires a time data field and an additional identifier which is unrelated to time (e.g. student ID, stock symbol, country code), then it is panel data candidate. If the differentiation lies on the non-time identifier, then the data set is a cross-sectional data set candidate. == Analysis == There are several types of motivation and data analysis available for time series which are appropriate for different purposes. === Motivation === In the context of statistics, econometrics, quantitative finance, seismology, meteorology, and geophysics the primary goal of time series analysis is forecasting. In the context of signal processing, control engineering and communication engineering it is used for signal detection. Other applications are in data mining, pattern recognition and machine learning, where time series analysis can be used for clustering, classification, query by content, anomaly detection as well as forecasting. === Exploratory analysis === A simple way to examine a regular time series is manually with a line chart. The datagraphic shows tuberculosis deaths in the United States, along with the yearly change and the percentage change from year to year. The total number of deaths declined in every year until the mid-1980s, after which there were occasional increases, often proportionately - but not absolutely - quite large. A study of corporate data analysts found two challenges to exploratory time series analysis: discovering the shape of interesting patterns, and finding an explanation for these patterns. Visual tools that represent time series data as heat map matrices can help overcome these challenges. === Estimation, filtering, and smoothing === This approach may be based on harmonic analysis and filtering of signals in the frequency domain using the Fourier transform, and spectral density estimation. Its development was significantly accelerated during World War II by mathematician Norbert Wiener, electrical engineers Rudolf E. Kálmán, Dennis Gabor and others for filtering signals from noise and predicting signal values at a certain point in time. An equivalent effect may be achieved in the time domain, as in a Kalman filter; see filtering and smoothing for more techniques. Other related techniques include: Autocorrelation analysis to examine serial dependence Spectral analysis to examine cyclic behavior which need not be related to seasonality. For example, sunspot activity varies over 11 year cycles. Other common examples include celestial phenomena, weather patterns, neural activity, commodity prices, and economic activity. Separation into components representing trend, seasonality, slow and fast variation, and cyclical irregularity: see trend estimation and decomposition of time series === Curve fitting === Curve fitting is the process of constructing a curve, or mathematical function, that has the best fit to a series of data points, possibly subject to constraints. Curve fitting can involve either interpolation, where an exact fit to the data is required, or smoothing, in which a "smooth" function is constructed that approximately fits the data. A related topic is regression analysis, which focuses more on questions of statistical inference such as how much uncertainty is present in a curve that is fit to data observed with random errors. Fitted curves can be used as an aid for data visualization, to infer values of a function where no data are available, and to summarize the relationships among two or more variables. Extrapolation refers to the use of a fitted curve beyond the range of the observed data, and is subject to a degree of uncertainty since it may reflect the method used to construct the curve as much as it reflects the observed data. For processes that are expected to generally grow in magnitude one of the curves in the graphic (and many others) can be fitted by estimating their parameters. The construction of economic time series involves the estimation of some components for some dates by interpolation between values ("benchmarks") for earlier and later dates. Interpolation is estimation of an unknown quantity between two known quantities (historical data), or drawing conclusions about missing information from the available information ("reading between the lines"). Interpolation is useful where the data surrounding the missing data is available and its trend, seasonality, and longer-term cycles are known. This is often done by using a relat

  Read more →
• 

  Inductive bias

  The inductive bias (also known as learning bias) of a learning algorithm is the set of assumptions that the learner uses to predict outputs of given inputs that it has not encountered. Inductive bias is anything which makes the algorithm learn one pattern instead of another pattern (e.g., step-functions in decision trees instead of continuous functions in linear regression models). Learning involves searching a space of solutions for a solution that provides a good explanation of the data. However, in many cases, there may be multiple equally appropriate solutions. An inductive bias allows a learning algorithm to prioritize one solution (or interpretation) over another, independently of the observed data. In machine learning, the aim is to construct algorithms that are able to learn to predict a certain target output. To achieve this, the learning algorithm is presented some training examples that demonstrate the intended relation of input and output values. Then the learner is supposed to approximate the correct output, even for examples that have not been shown during training. Without any additional assumptions, this problem cannot be solved since unseen situations might have an arbitrary output value. The kind of necessary assumptions about the nature of the target function are subsumed in the phrase inductive bias. A classical example of an inductive bias is Occam's razor, assuming that the simplest consistent hypothesis about the target function is actually the best. Here, consistent means that the hypothesis of the learner yields correct outputs for all of the examples that have been given to the algorithm. Approaches to a more formal definition of inductive bias are based on mathematical logic. Here, the inductive bias is a logical formula that, together with the training data, logically entails the hypothesis generated by the learner. However, this strict formalism fails in many practical cases in which the inductive bias can only be given as a rough description (e.g., in the case of artificial neural networks), or not at all. == Types == The following is a list of common inductive biases in machine learning algorithms. Maximum conditional independence: if the hypothesis can be cast in a Bayesian framework, try to maximize conditional independence. This is the bias used in the Naive Bayes classifier. Minimum cross-validation error: when trying to choose among hypotheses, select the hypothesis with the lowest cross-validation error. Although cross-validation may seem to be free of bias, the "no free lunch" theorems show that cross-validation must be biased, for example assuming that there is no information encoded in the ordering of the data. Maximum margin: when drawing a boundary between two classes, attempt to maximize the width of the boundary. This is the bias used in support vector machines. The assumption is that distinct classes tend to be separated by wide boundaries. Minimum description length: when forming a hypothesis, attempt to minimize the length of the description of the hypothesis. Minimum features: unless there is good evidence that a feature is useful, it should be deleted. This is the assumption behind feature selection algorithms. Nearest neighbors: assume that most of the cases in a small neighborhood in feature space belong to the same class. Given a case for which the class is unknown, guess that it belongs to the same class as the majority in its immediate neighborhood. This is the bias used in the k-nearest neighbors algorithm. The assumption is that cases that are near each other tend to belong to the same class. == Shift of bias == Although most learning algorithms have a static bias, some algorithms are designed to shift their bias as they acquire more data. This does not avoid bias, since the bias shifting process itself must have a bias.

  Read more →
• 

  Digistar

  Digistar is the first computer graphics-based planetarium projection and content system. It was designed by Evans & Sutherland and released in 1983. The technology originally focused on accurate and high quality display of stars, including for the first time showing stars from points of view other than Earth's surface, travelling through the stars, and accurately showing celestial bodies from different times in the past and future. Beginning with the Digistar 3 the system now projects full-dome video. == Projector == Unlike modern full-dome systems, which use LCD, DLP, SXRD, or laser projection technology, the Digistar projection system was designed for projecting bright pinpoints of light representing stars. This was accomplished using a calligraphic display, a form of vector graphics, rather than raster graphics. The heart of the Digistar projector is a large cathode-ray tube (CRT). A phosphor plate is mounted atop the tube, and light is then dispersed by a large lens with a 160 degree field of view to cover the planetarium dome. The original lens bore the inscription: "August 1979 mfg. by Lincoln Optical Corp., L.A., CA for Evans and Sutherland Computer Corp., SLC, UT, Digital planetarium CRT projection lens, 43mm, f2.8, 160 degree field of view". The coordinates of the stars and wire-frame models to be displayed by the projector were stored in computer RAM in a display list. The display would read each set of coordinates in turn and drive the CRT's electron beam directly to those coordinates. If the electron beam was enabled while being moved a line would be painted on the phosphor plate. Otherwise, the electron beam would be enabled once at its destination and a star would be painted. Once all coordinates in the display list had been processed, the display would repeat from the top of the display list. Thus, the shorter the display list the more frequently the electron beam would refresh the charge on a given point on the phosphor plate, making the projection of the points brighter. In this way, the stars projected by Digistar were substantially brighter than could be achieved using a raster display, which has to touch every point on the phosphor plate before repeating. Likewise, the calligraphic technology allowed Digistar to have a darker black-level than full-dome projectors, since the portions of the phosphor plate representing dark sky were never hit by the electron beam. As it is only one tube, with no pixelated color filter screen, the Digistar projector is monochromatic. The Digistar projects a bright, phosphorescent green, though many (including both visitors and planetarians) report they cannot distinguish between this green and white. Additionally, unlike a raster display, the calligraphic display is not discretized into pixels, so the displayed stars were a more realistic single spot of light, without the blocky or ropy artifacts that are hard to avoid with raster graphics. Due to the use of vector graphics, as opposed to raster imaging, the Digistar does not have the resolution issues that many full-dome systems have. Thanks to this, and the brightness of the CRT, only one projector is needed to project on the entire dome, whereas most full-dome systems require up to six raster projectors, depending on dome size. The projector in the original Digistar was housed in a square pyramid-shaped sheathing. When powered on, the four sides at the tip of the pyramid would recede into the housing, exposing the lens and appearing as a cut-off pyramid. As Digistar II was being developed, many planetaria were sold Digistar LEA projectors. The LEA, called Digistar 1.5 by many users, was effectively a prototype of the D2 projector, compatible with Digistar and upgradable to Digistar II. There are no significant differences in performance between the LEA and the true D2. == History == Digistar was the brainchild of Stephen McAllister and Brent Watson, both of whom were long-time amateur astronomers and computer graphics engineers. In 1977, E&S had been consulting with Johnson Space Center regarding training simulators for astronauts. McAllister had been writing proof-of-concept software for this consultation and in summer 1977 entered the data for 400 bright stars and wrote the software to display them. Steve and Brent both originally saw the system's purpose as celestial navigation training. Brent, who had until recently worked at Hansen planetarium, asked his planetarium coworkers what they thought of a potential digital planetarium system, and then Steve and Brent both targeted the system toward planetaria. The primary goal of the planetarium system was to use computer graphics to overcome the limitation of traditional star ball technology that only allowed display of star fields from the point of view of Earth's surface. By using computer graphics the stars could be displayed from viewpoints in space, including simulating the appearance of space flight. Likewise, planets and moons within the Solar System could be displayed accurately for any time in history, from any point of view. The system used the location of real stars from the Yale Bright Star Catalogue, as well as random stars. A laboratory prototype of Digistar was used to generate the star fields and tactical displays in the 1982 science fiction film Star Trek II: The Wrath of Khan. Filming was done directly from the Digistar display in the lab. ILM projected the effort would take two weeks, but in fact it took from late November 1981 until mid-February 1982. The last shot recorded was what became the first entirely computer generated feature film sequence. It was the opening scene of the film, a rotating forward translation through a star field that lasted 3.5 minutes. It was recorded in one take, at a rate of one frame every 3.5 seconds, taking four hours for the shoot. The Digistar team members are credited in the film. After prototyping in labs at Evans and Sutherland the team repeatedly used Salt Lake City's Hansen planetarium to beta test the system at the planetarium at night. The Digistar team performed one week of shows at the planetarium as a fund raiser to benefit the planetarium. The company also later gave the planetarium an improved prototype Digistar to replace "Jake", the planetarium's aging Spitz planetarium projector. The first customer installation was to the newly constructed Universe Planetarium at the Science Museum of Virginia in 1983, the largest planetarium dome in the world at the time, for $595,000. By September 1986 there were four installed Digistars. Even at this point the long-term success of the product was very much in doubt, but as of 2019 Digistar has an installed base of over 550 planetaria. === Versions === Digistar (1983) Digistar II (1995) Digistar 3 (2002) Digistar 4 (2010?) Digistar 5 (2012) Digistar 6 (2016) Digistar 7 (2021) == Hardware == Digistar was driven by a VAX-11/780 minicomputer, with custom graphics hardware related to the E&S Picture System 2. Later versions of Digistar 1 used a DEC MicroVAX 2, driving a custom version of a PS/300. The original Digistar and Digistar 2 had a physical control panel that was used for running the star shows. This control panel was approximately 3' x 4' and contained a keyboard, a 6 DOF joystick, and a large array of back-lit buttons. One button that was used for moving the viewpoint forward in space was labeled "Boldly Go". Later iterations of Digistar replaced the physical control panel with a common graphical user interface. Digistar 3 was the first Digistar system to offer full-dome video in 2002, using six projectors. Digistar 4 was able to cover the dome using only two projectors. == System limitations == Though technologically advanced in its day, and the closest system to true full-dome video at the time of its release, the original Digistar and Digistar 2 are limited to only projecting dots and lines—meaning only wireframe models can be projected. To compensate for this, the projector is capable of defocusing specific models, blurring lines and dots together. An example of this is in the Digistar 2's built-in Milky Way model. The model is a circle of parallel lines that, when defocused, appear as the continuous band of the Milky Way across the sky. On more complex models, especially three-dimensional ones, brightness and details may be lost in this process, so it is not useful in all situations. The Digistar and Digistar 2 also suffer focus limitations. Because they use a single lens to cover the entire dome, it is difficult to gain perfect focus across the dome. Coupled with this, stars greater than a certain brightness are "multihit" points, meaning the projector draws two dots at the given position to accommodate the brightness of the star. Errors in the projector can lead the second dot to be slightly out-of-place with the first one. These two issues together, along with other issues that can occur within the projector's focus system, give the stars a blobby look. Some p

  Read more →
• 

  MLOps

  MLOps or ML Ops is a paradigm that aims to deploy and maintain machine learning models in production reliably and efficiently. It bridges the gap between machine learning development and production operations, ensuring that models are robust, scalable, and aligned with business goals. The word is a compound of "machine learning" and the continuous delivery practice (CI/CD) of DevOps in the software field. Machine learning models are tested and developed in isolated experimental systems. When an algorithm is ready to be launched, MLOps is practiced between data scientists, DevOps, and machine learning engineers to transition the algorithm to production systems. Similar to DevOps or DataOps approaches, MLOps seeks to increase automation and improve the quality of production models, while also focusing on business and regulatory requirements. While MLOps started as a set of best practices, it is slowly evolving into an independent approach to ML lifecycle management. MLOps applies to the entire lifecycle - from integrating with model generation (software development lifecycle, continuous integration/continuous delivery), orchestration, and deployment, to health, diagnostics, governance, and business metrics. == Definition == MLOps is a paradigm, including aspects like best practices, sets of concepts, as well as a development culture when it comes to the end-to-end conceptualization, implementation, monitoring, deployment, and scalability of machine learning products. Most of all, it is an engineering practice that leverages three contributing disciplines: machine learning, software engineering (especially DevOps), and data engineering. MLOps is aimed at productionizing machine learning systems by bridging the gap between development (Dev) and operations (Ops). Essentially, MLOps aims to facilitate the creation of machine learning products by leveraging these principles: CI/CD automation, workflow orchestration, reproducibility; versioning of data, model, and code; collaboration; continuous ML training and evaluation; ML metadata tracking and logging; continuous monitoring; and feedback loops. == History == Interest in operationalizing machine learning systems began to grow in the mid-2010s as ML projects started moving from experimentation to production use. The challenges associated with sustaining such systems were highlighted in a 2015 paper. The predicted growth in machine learning included an estimated doubling of ML pilots and implementations from 2017 to 2018, and again from 2018 to 2020. Reports show a majority (up to 88%) of corporate machine learning initiatives are struggling to move beyond test stages. However, those organizations that actually put machine learning into production saw a 3–15% profit margin increases. The MLOps market size was USD 2,191.8 Million in 2024, and is projected to be USD 16,613.4 Million in 2030. == Architecture == Machine Learning systems can be categorized in eight different categories: data collection, data processing, feature engineering, data labeling, model design, model training and optimization, endpoint deployment, and endpoint monitoring. Each step in the machine learning lifecycle is built in its own system, but requires interconnection. These are the minimum systems that enterprises need to scale machine learning within their organization. == Goals == There are a number of goals enterprises want to achieve through MLOps systems successfully implementing ML across the enterprise, including: Deployment and automation Reproducibility of models and predictions Diagnostics Governance and regulatory compliance Scalability Collaboration Business uses Monitoring and management A standard practice, such as MLOps, takes into account each of the aforementioned areas, which can help enterprises optimize workflows and avoid issues during implementation. Vendors such as Adaptive ML deliver commercial reinforcement learning operations (RLOps) and MLOps-infrastructure, targeting organizations deploying large language models in production. A common architecture of an MLOps system would include data science platforms where models are constructed and the analytical engines where computations are performed, with the MLOps tool orchestrating the movement of machine learning models, data and outcomes between the systems.

  Read more →
• 

  Learning curve (machine learning)

  In machine learning (ML), a learning curve (or training curve) is a graphical representation that shows how a model's performance on a training set (and usually a validation set) changes with the number of training iterations (epochs) or the amount of training data. Typically, the number of training epochs or training set size is plotted on the x-axis, and the value of the loss function (and possibly some other metric such as the cross-validation score) on the y-axis. Synonyms include error curve, experience curve, improvement curve and generalization curve. More abstractly, learning curves plot the difference between learning effort and predictive performance, where "learning effort" usually means the number of training samples, and "predictive performance" means accuracy on testing samples. Learning curves have many useful purposes in ML, including: choosing model parameters during design, adjusting optimization to improve convergence, and diagnosing problems such as overfitting (or underfitting). Learning curves can also be tools for determining how much a model benefits from adding more training data, and whether the model suffers more from a variance error or a bias error. If both the validation score and the training score converge to a certain value, then the model will no longer significantly benefit from more training data. == Formal definition == When creating a function to approximate the distribution of some data, it is necessary to define a loss function L ( f θ ( X ) , Y ) {\displaystyle L(f_{\theta }(X),Y)} to measure how good the model output is (e.g., accuracy for classification tasks or mean squared error for regression). We then define an optimization process which finds model parameters θ {\displaystyle \theta } such that L ( f θ ( X ) , Y ) {\displaystyle L(f_{\theta }(X),Y)} is minimized, referred to as θ ∗ {\displaystyle \theta ^{}} . === Training curve for amount of data === If the training data is { x 1 , x 2 , … , x n } , { y 1 , y 2 , … y n } {\displaystyle \{x_{1},x_{2},\dots ,x_{n}\},\{y_{1},y_{2},\dots y_{n}\}} and the validation data is { x 1 ′ , x 2 ′ , … x m ′ } , { y 1 ′ , y 2 ′ , … y m ′ } {\displaystyle \{x_{1}',x_{2}',\dots x_{m}'\},\{y_{1}',y_{2}',\dots y_{m}'\}} , a learning curve is the plot of the two curves i ↦ L ( f θ ∗ ( X i , Y i ) ( X i ) , Y i ) {\displaystyle i\mapsto L(f_{\theta ^{}(X_{i},Y_{i})}(X_{i}),Y_{i})} i ↦ L ( f θ ∗ ( X i , Y i ) ( X i ′ ) , Y i ′ ) {\displaystyle i\mapsto L(f_{\theta ^{}(X_{i},Y_{i})}(X_{i}'),Y_{i}')} where X i = { x 1 , x 2 , … x i } {\displaystyle X_{i}=\{x_{1},x_{2},\dots x_{i}\}} === Training curve for number of iterations === Many optimization algorithms are iterative, repeating the same step (such as backpropagation) until the process converges to an optimal value. Gradient descent is one such algorithm. If θ i ∗ {\displaystyle \theta _{i}^{}} is the approximation of the optimal θ {\displaystyle \theta } after i {\displaystyle i} steps, a learning curve is the plot of i ↦ L ( f θ i ∗ ( X , Y ) ( X ) , Y ) {\displaystyle i\mapsto L(f_{\theta _{i}^{}(X,Y)}(X),Y)} i ↦ L ( f θ i ∗ ( X , Y ) ( X ′ ) , Y ′ ) {\displaystyle i\mapsto L(f_{\theta _{i}^{}(X,Y)}(X'),Y')}

  Read more →
• 

  Grammar systems theory

  Grammar systems theory is a field of theoretical computer science that studies systems of finite collections of formal grammars generating a formal language. Each grammar works on a string, a so-called sequential form that represents an environment. Grammar systems can thus be used as a formalization of decentralized or distributed systems of agents in artificial intelligence. Let A {\displaystyle \mathbb {A} } be a simple reactive agent moving on the table and trying not to fall down from the table with two reactions, t for turning and ƒ for moving forward. The set of possible behaviors of A {\displaystyle \mathbb {A} } can then be described as formal language L A = { ( f m t n f r ) + : 1 ≤ m ≤ k ; 1 ≤ n ≤ ℓ ; 1 ≤ r ≤ k } , {\displaystyle \mathbb {L_{A}} =\{(f^{m}t^{n}f^{r})^{+}:1\leq m\leq k;1\leq n\leq \ell ;1\leq r\leq k\},} where ƒ can be done maximally k times and t can be done maximally ℓ times considering the dimensions of the table. Let G A {\displaystyle \mathbb {G_{A}} } be a formal grammar which generates language L A {\displaystyle \mathbb {L_{A}} } . The behavior of A {\displaystyle \mathbb {A} } is then described by this grammar. Suppose the A {\displaystyle \mathbb {A} } has a subsumption architecture; each component of this architecture can be then represented as a formal grammar, too, and the final behavior of the agent is then described by this system of grammars. The schema on the right describes such a system of grammars which shares a common string representing an environment. The shared sequential form is sequentially rewritten by each grammar, which can represent either a component or generally an agent. If grammars communicate together and work on a shared sequential form, it is called a Cooperating Distributed (DC) grammar system. Shared sequential form is a similar concept to the blackboard approach in AI, which is inspired by an idea of experts solving some problem together while they share their proposals and ideas on a shared blackboard. Each grammar in a grammar system can also work on its own string and communicate with other grammars in a system by sending their sequential forms on request. Such a grammar system is then called a Parallel Communicating (PC) grammar system. PC and DC are inspired by distributed AI. If there is no communication between grammars, the system is close to the decentralized approaches in AI. These kinds of grammar systems are sometimes called colonies or Eco-Grammar systems, depending (besides others) on whether the environment is changing on its own (Eco-Grammar system) or not (colonies).

  Read more →
• 

  Doubao

  Doubao (Chinese: 豆包) is an artificial intelligence assistant developed by ByteDance. == History == The chatbot was launched in August 2023. By November 2024, it had become China's most popular AI chatbot, with approximately 60 million monthly active users according to industry analytics. == Design == Doubao is powered by Volcano Engine (Volcengine), 120 trillion tokens consumed per day. == Variants == === Dola === The international version of Doubao is Dola which was launched in August 2023 as Cici. Dola is powered by OpenAI's GPT series of large language models and by Google's Gemini.

  Read more →
• 

  Environmental impact of AI

  The environmental impact of the design, training, deployment and use of artificial intelligence includes the greenhouse gas emissions from generating electricity for data centres and computing hardware, operational and upstream water use, and material impacts from hardware manufacturing, mining and electronic waste. Estimating AI's environmental effects can be difficult because results depend on how impacts are measured, including whether accounting includes only model computation or also data-centre overhead, idle capacity, hardware manufacture, and local electricity supply. As these issues have received greater attention, governments and regulators have increasingly considered data-centre reporting requirements, energy-efficiency standards, and broader transparency measures for AI-related resource use. == Carbon footprint and energy use == AI-related energy use arises at multiple stages, including model training, fine-tuning, inference, storage, networking, and supporting infrastructure such as cooling and power conversion. === Individual level === Published estimates of energy use per AI request vary widely across models, tasks and measurement methods. A benchmark study presented at the 2024 ACM Conference on Fairness, Accountability, and Transparency found substantial differences between task types, with lower energy use for some text tasks and much higher energy use for image generation in the study's test conditions. In that benchmark, simple classification tasks consumed about 0.002–0.007 Wh per prompt on average (about 9% of a smartphone charge for 1,000 prompts), while text generation and text summarisation each used about 0.05 Wh per prompt; image generation averaged 2.91 Wh per prompt, and the least efficient image model in the study used 11.49 Wh per image (roughly equivalent to half a smartphone charge). First-party measurements in production environments have also been published. A 2025 Google study on Gemini assistant serving reported median per-prompt energy, emissions, and water-use estimates under the authors' accounting framework, while noting that different system boundaries can produce substantially different results. The study reported a median text-prompt estimate of about 0.24 Wh, which is roughly as much energy as watching nine seconds of television. The study also stated that software and infrastructure improvements reduced energy use by a factor of 33 and carbon emissions by a factor of 44 for a typical prompt over one year within the authors' framework. Researchers at the University of Michigan measured the energy consumption of various Meta Llama 3.1 models released in 2024 and found that smaller language models (8 billion parameters) use about 114 joules (0.03167 Wh) per response, while larger models (405 billion parameters) require up to 6,700 joules (1.861 Wh) per response. This corresponds to the energy needed to run a microwave oven for roughly one-tenth of a second and eight seconds, respectively. Comparisons between AI systems and human labour for specific tasks have produced mixed results and remain sensitive to assumptions about output quality, workload and system boundaries. A 2024 study in Scientific Reports reported 130 to 2900 times lower estimated carbon emissions for selected AI systems than for human writers and illustrators under its assumptions. A later Scientific Reports paper reported a counterexample for programming tasks under its assumptions, finding 5 to 19 times higher estimated emissions for the evaluated AI system than for human programmers on the benchmark used in that study. === System level === ==== Energy use and efficiency ==== AI electricity intensity depends not only on model architecture but also on hardware and facility efficiency. Data-centre operators commonly report Power usage effectiveness (PUE), which measures the ratio of total facility energy to IT equipment energy; a lower PUE indicates less overhead energy for cooling and other supporting infrastructure. Operators may also publish metrics and case studies on hardware efficiency, cooling systems and power sourcing. In its 2024 environmental report, Google stated that its 2023 total greenhouse gas emissions increased 13% year over year, primarily because of increased data-centre energy consumption and supply-chain emissions, while also reporting lower PUE than industry averages for its own facilities. The International Energy Agency has also reported that data centres remain a relatively small share of global electricity use overall, but that their local effects can be much more pronounced because demand is geographically concentrated. ==== Carbon footprint ==== At system level, AI contributes to rising electricity demand in data centres and related infrastructure. The International Energy Agency estimated that data centres used about 415 TWh of electricity in 2024, or around 1.5% of global electricity consumption, and projected that data-centre electricity use could rise to about 945 TWh by 2030, with AI identified as the main driver of that growth alongside other digital services. The carbon footprint of AI systems depends strongly on electricity sources, hardware efficiency, utilisation rates, and what stages are included in the accounting. Training large models can require substantial electricity, while total lifecycle impacts also depend on deployment scale and the amount of inference performed after training. Early analyses of frontier-model development reported rapid historical growth in training compute for selected systems, although later trends have depended on changes in model design, hardware and efficiency gains. Accounting methods that include upstream or embodied impacts, such as hardware manufacture and facilities construction, can materially affect estimates of AI-related emissions. === Decisions and strategies by individual companies === Large technology companies have reported that the expansion of AI and cloud infrastructure affects their sustainability targets, electricity demand, and resource use. Google, for example, attributed part of its emissions growth in 2023 to increased data-centre energy consumption and supply-chain emissions in its 2024 environmental report. Cloud and AI companies have also announced measures intended to reduce environmental impacts, including investment in more efficient hardware, low-carbon electricity procurement, alternative cooling systems, and water stewardship programmes. The extent, comparability, and third-party verification of such disclosures vary between firms and jurisdictions. == Water usage == Data centres can use water directly for cooling and indirectly through the water used in electricity generation, depending on the local energy mix. Public reporting on data-centre water use has often been inconsistent, making comparisons between operators and regions difficult. To standardise operational reporting, The Green Grid proposed the metric water usage effectiveness (WUE), defined as annual site water use divided by IT equipment energy use. WUE does not by itself measure local water stress, source sustainability, or all upstream water impacts. Studies of AI water use also distinguish between water withdrawal and water consumption. Research on AI-specific water use has argued that the water footprint of AI systems can be difficult to observe and may vary substantially by location, cooling design, and electricity source. A 2025 Communications of the ACM article summarised methods for estimating AI water footprints and emphasised the distinction between water withdrawal and water consumption. Li and colleagues estimated that global AI water withdrawal could reach 4.2–6.6 billion cubic metres in 2027 under the scenarios examined in their article. Using GPT-3, released by OpenAI in 2020, as an example, they estimated that training the model in Microsoft's U.S. data centres could consume about 700,000 litres of onsite water and about 5.4 million litres in total when offsite electricity-related water use was included; they also estimated that 10–50 medium-length GPT-3 responses could consume about 500 mL of water, depending on when and where the model was deployed. Published prompt-level estimates have also varied by system and accounting framework: the 2025 Google study on Gemini assistant serving reported a median text-prompt estimate of about 0.26 mL under its framework. Location can materially affect the significance of data-centre water use. Research on U.S. data centres found that one-fifth of servers' direct water footprint came from moderately to highly water-stressed watersheds, while nearly half of servers were fully or partially powered by plants located in water-stressed regions. A 2025 Reuters report, citing data from Verisk Maplecroft and NatureFinance, said that an average mid-sized data centre uses about 1.4 million litres of water per day for cooling and that Phoenix would experience a 32% increase in annual water stress if currently pl

  Read more →
• 

  Adversarial machine learning

  Adversarial machine learning is the study of the attacks on machine learning algorithms, and of the defenses against such attacks. Machine learning techniques are mostly designed to work on specific problem sets, under the assumption that the training and test data are generated from the same statistical distribution (IID). However, this assumption is often violated in practical high-stake applications, where users may intentionally supply fabricated data that violates the statistical assumption. Most common attacks in adversarial machine learning include evasion attacks, data poisoning attacks, Byzantine attacks and model extraction. == History == At the MIT Spam Conference in January 2004, John Graham-Cumming showed that a machine-learning spam filter could be used to defeat another machine-learning spam filter by automatically learning which words to add to a spam email to get the email classified as not spam. In 2004, Nilesh Dalvi and others noted that linear classifiers used in spam filters could be defeated by simple "evasion attacks" as spammers inserted "good words" into their spam emails. (Around 2007, some spammers added random noise to fuzz words within "image spam" in order to defeat OCR-based filters.) In 2006, Marco Barreno and others published "Can Machine Learning Be Secure?", outlining a broad taxonomy of attacks. As late as 2013 many researchers continued to hope that non-linear classifiers (such as support vector machines and neural networks) might be robust to adversaries, until Battista Biggio and others demonstrated the first gradient-based attacks on such machine-learning models (2012–2013). In 2012, deep neural networks began to dominate computer vision problems; starting in 2014, Christian Szegedy and others demonstrated that deep neural networks could be fooled by adversaries, again using a gradient-based attack to craft adversarial perturbations. Further work would show that adversarial attacks are harder to produce in uncontrolled environments, due to the different environmental constraints that cancel out the effect of noise. For example, any small rotation or slight illumination on an adversarial image can destroy the adversariality. In addition, researchers such as Google Brain's Nick Frosst point out that it is much easier to make self-driving cars miss stop signs by physically removing the sign itself, rather than creating adversarial examples. Frosst also believes that the adversarial machine learning community incorrectly assumes models trained on a certain data distribution will also perform well on a completely different data distribution. He suggests that a new approach to machine learning should be explored, and is currently working on a unique neural network that has characteristics more similar to human perception than state-of-the-art approaches. While adversarial machine learning continues to be heavily rooted in academia, large tech companies such as Google, Microsoft, and IBM have begun curating documentation and open source code bases to allow others to concretely assess the robustness of machine learning models and minimize the risk of adversarial attacks. === Examples === Examples include attacks in spam filtering, where spam messages are obfuscated through the misspelling of "bad" words or the insertion of "good" words; attacks in computer security, such as obfuscating malware code within network packets or modifying the characteristics of a network flow to mislead intrusion detection; attacks in biometric recognition where fake biometric traits may be exploited to impersonate a legitimate user; or to compromise users' template galleries that adapt to updated traits over time. Researchers showed that by changing only one-pixel it was possible to fool deep learning algorithms. Others 3-D printed a toy turtle with a texture engineered to make Google's object detection AI classify it as a rifle regardless of the angle from which the turtle was viewed. Creating the turtle required only low-cost commercially available 3-D printing technology. A machine-tweaked image of a dog was shown to look like a cat to both computers and humans. A 2019 study reported that humans can guess how machines will classify adversarial images. Researchers discovered methods for perturbing the appearance of a stop sign such that an autonomous vehicle classified it as a merge or speed limit sign. A data poisoning filter called Nightshade was released in 2023 by researchers at the University of Chicago. It was created for use by visual artists to put on their artwork to corrupt the data set of text-to-image models, which usually scrape their data from the internet without the consent of the image creator. McAfee attacked Tesla's former Mobileye system, fooling it into driving 50 mph over the speed limit, simply by adding a two-inch strip of black tape to a speed limit sign. Adversarial patterns on glasses or clothing designed to deceive facial-recognition systems or license-plate readers, have led to a niche industry of "stealth streetwear". An adversarial attack on a neural network can allow an attacker to inject algorithms into the target system. Researchers can also create adversarial audio inputs to disguise commands to intelligent assistants in benign-seeming audio; a parallel literature explores human perception of such stimuli. Clustering algorithms are used in security applications. Malware and computer virus analysis aims to identify malware families, and to generate specific detection signatures. In the context of malware detection, researchers have proposed methods for adversarial malware generation that automatically craft binaries to evade learning-based detectors while preserving malicious functionality. Optimization-based attacks such as GAMMA use genetic algorithms to inject benign content (for example, padding or new PE sections) into Windows executables, framing evasion as a constrained optimization problem that balances misclassification success with the size of the injected payload and showing transferability to commercial antivirus products. Complementary work uses generative adversarial networks (GANs) to learn feature-space perturbations that cause malware to be classified as benign; Mal-LSGAN, for instance, replaces the standard GAN loss with a least-squares objective and modified activation functions to improve training stability and produce adversarial malware examples that substantially reduce true positive rates across multiple detectors. == Challenges in applying machine learning to security == Researchers have observed that the constraints under which machine-learning techniques function in the security domain are different from those of common benchmark domains. Security data may change over time, include mislabeled samples, or reflect adversarial behavior, which complicates evaluation and reproducibility. === Data collection issues === Security datasets vary across formats, including binaries, network traces, and log files. Studies have reported that the process of converting these sources into features can introduce bias or inconsistencies. In addition, time-based leakage can occur when related malware samples are not properly separated across training and testing splits, which may lead to overly optimistic results. === Labeling and ground truth challenges === Malware labels are often unstable because different antivirus engines may classify the same sample in conflicting ways. Ceschin et al. note that families may be renamed or reorganized over time, causing further discrepancies in ground truth and reducing the reliability of benchmarks. === Concept drift === Because malware creators continuously adapt their techniques, the statistical properties of malicious samples also change. This form of concept drift has been widely documented and may reduce model performance unless systems are updated regularly or incorporate mechanisms for incremental learning. === Feature robustness === Researchers differentiate between features that can be easily manipulated and those that are more resistant to modification. For example, simple static attributes, such as header fields, may be altered by attackers, while structural features, such as control-flow graphs, are generally more stable but computationally expensive to extract. === Class imbalance === In realistic deployment environments, the proportion of malicious samples can be extremely low, ranging from 0.01% to 2% of total data. This unbalanced distribution causes models to develop a bias towards the majority class, achieving high accuracy but failing to identify malicious samples. Prior approaches to this problem have included both data-level solutions and sequence-specific models. Methods like n-gram and Long Short-Term Memory (LSTM) networks can model sequential data, but their performance has been shown to decline significantly when malware samples are realistically proportioned in the training set, demonstrating the limitations in

  Read more →
• 

  Data augmentation

  Data augmentation is a statistical technique which allows maximum likelihood estimation from incomplete data. Data augmentation has important applications in Bayesian analysis, and the technique is widely used in machine learning to reduce overfitting when training machine learning models, achieved by training models on several slightly-modified copies of existing data. == Synthetic oversampling techniques for traditional machine learning == Synthetic Minority Over-sampling Technique (SMOTE) is a method used to address imbalanced datasets in machine learning. In such datasets, the number of samples in different classes varies significantly, leading to biased model performance. For example, in a medical diagnosis dataset with 90 samples representing healthy individuals and only 10 samples representing individuals with a particular disease, traditional algorithms may struggle to accurately classify the minority class. SMOTE rebalances the dataset by generating synthetic samples for the minority class. For instance, if there are 100 samples in the majority class and 10 in the minority class, SMOTE can create synthetic samples by randomly selecting a minority class sample and its nearest neighbors, then generating new samples along the line segments joining these neighbors. This process helps increase the representation of the minority class, improving model performance. == Data augmentation for image classification == When convolutional neural networks grew larger in mid-1990s, there was a lack of data to use, especially considering that some part of the overall dataset should be spared for later testing. It was proposed to perturb existing data with affine transformations to create new examples with the same labels, which were complemented by so-called elastic distortions in 2003, and the technique was widely used as of 2010s. Data augmentation can enhance CNN performance and acts as a countermeasure against CNN profiling attacks. Data augmentation has become fundamental in image classification, enriching training dataset diversity to improve model generalization and performance. The evolution of this practice has introduced a broad spectrum of techniques, including geometric transformations, color space adjustments, and noise injection. === Geometric Transformations === Geometric transformations alter the spatial properties of images to simulate different perspectives, orientations, and scales. Common techniques include: Affine Transformation Rotation: Rotating images by a specified degree to help models recognize objects at various angles. Reflection: Reflecting images horizontally or vertically to introduce variability in orientation. Translation: Shifting images in different directions to teach models positional invariance. Scaling Shear Mapping Cropping: Removing sections of the image to focus on particular features or simulate closer views. Elastic Distortion Morphing within the same class: Generating new samples by applying morphing techniques between two images belonging to the same class, thereby increasing intra-class diversity. === Color Space Transformations === Color space transformations modify the color properties of images, addressing variations in lighting, color saturation, and contrast. Techniques include: Brightness Adjustment: Varying the image's brightness to simulate different lighting conditions. Contrast Adjustment: Changing the contrast to help models recognize objects under various clarity levels. Saturation Adjustment: Altering saturation to prepare models for images with diverse color intensities. Color Jittering: Randomly adjusting brightness, contrast, saturation, and hue to introduce color variability. === Noise Injection === Injecting noise into images simulates real-world imperfections, teaching models to ignore irrelevant variations. Techniques involve: Gaussian Noise: Adding Gaussian noise mimics sensor noise or graininess. Salt and Pepper Noise: Introducing black or white pixels at random simulates sensor dust or dead pixels. == Data augmentation for signal processing == Residual or block bootstrap can be used for time series augmentation. === Biological signals === Synthetic data augmentation is of paramount importance for machine learning classification, particularly for biological data, which tend to be high dimensional and scarce. The applications of robotic control and augmentation in disabled and able-bodied subjects still rely mainly on subject-specific analyses. Data scarcity is notable in signal processing problems such as for Parkinson's Disease Electromyography signals, which are difficult to source - Zanini, et al. noted that it is possible to use a generative adversarial network (in particular, a DCGAN) to perform style transfer in order to generate synthetic electromyographic signals that corresponded to those exhibited by sufferers of Parkinson's Disease. The approaches are also important in electroencephalography (brainwaves). Wang, et al. explored the idea of using deep convolutional neural networks for EEG-Based Emotion Recognition, results show that emotion recognition was improved when data augmentation was used. A common approach is to generate synthetic signals by re-arranging components of real data. Lotte proposed a method of "Artificial Trial Generation Based on Analogy" where three data examples x 1 , x 2 , x 3 {\displaystyle x_{1},x_{2},x_{3}} provide examples and an artificial x s y n t h e t i c {\displaystyle x_{synthetic}} is formed which is to x 3 {\displaystyle x_{3}} what x 2 {\displaystyle x_{2}} is to x 1 {\displaystyle x_{1}} . A transformation is applied to x 1 {\displaystyle x_{1}} to make it more similar to x 2 {\displaystyle x_{2}} , the same transformation is then applied to x 3 {\displaystyle x_{3}} which generates x s y n t h e t i c {\displaystyle x_{synthetic}} . This approach was shown to improve performance of a Linear Discriminant Analysis classifier on three different datasets. Current research shows great impact can be derived from relatively simple techniques. For example, Freer observed that introducing noise into gathered data to form additional data points improved the learning ability of several models which otherwise performed relatively poorly. Tsinganos et al. studied the approaches of magnitude warping, wavelet decomposition, and synthetic surface EMG models (generative approaches) for hand gesture recognition, finding classification performance increases of up to +16% when augmented data was introduced during training. More recently, data augmentation studies have begun to focus on the field of deep learning, more specifically on the ability of generative models to create artificial data which is then introduced during the classification model training process. In 2018, Luo et al. observed that useful EEG signal data could be generated by Conditional Wasserstein Generative Adversarial Networks (GANs) which was then introduced to the training set in a classical train-test learning framework. The authors found classification performance was improved when such techniques were introduced. === Mechanical signals === The prediction of mechanical signals based on data augmentation brings a new generation of technological innovations, such as new energy dispatch, 5G communication field, and robotics control engineering. In 2022, Yang et al. integrate constraints, optimization and control into a deep network framework based on data augmentation and data pruning with spatio-temporal data correlation, and improve the interpretability, safety and controllability of deep learning in real industrial projects through explicit mathematical programming equations and analytical solutions.

  Read more →
• 

  Underwater computer vision

  Underwater computer vision is a subfield of computer vision. In recent years, with the development of underwater vehicles ( ROV, AUV, gliders), the need to be able to record and process huge amounts of information has become increasingly important. Applications range from inspection of underwater structures for the offshore industry to the identification and counting of fishes for biological research. However, no matter how big the impact of this technology can be to industry and research, it still is in a very early stage of development compared to traditional computer vision. One reason for this is that, the moment the camera goes into the water, a whole new set of challenges appear. On one hand, cameras have to be made waterproof, marine corrosion deteriorates materials quickly and access and modifications to experimental setups are costly, both in time and resources. On the other hand, the physical properties of the water make light behave differently, changing the appearance of a same object with variations of depth, organic material, currents, temperature etc. == Applications == Seafloor survey Vehicle navigation and positioning Biological monitoring {possibly aquatic biomonitoring) Video mosaics as visual navigation maps Submarine pipeline inspection Wreckage visualization Maintenance of underwater structures Drowning detection systems == Medium differences == === Illumination === In air, light comes from the whole hemisphere on cloudy days, and is dominated by the sun. In water direct lighting comes from a cone about 96° wide above the scene. This phenomenon is called Snell's window. Artificial lighting can be used where natural light levels are insufficient and where the light path is too long to produce acceptable colour, as the loss of colour is a function of the total distance through water from the source to the camera lens port. === Light attenuation === Unlike air, water attenuates light exponentially. This results in hazy images with very low contrast. The main reasons for light attenuation are light absorption (where energy is removed from the light) and light scattering, by which the direction of light is changed. Light scattering can further be divided into forward scattering, which results in an increased blurriness and backward scattering that limits the contrast and is responsible for the characteristic veil of underwater images. Both scattering and attenuation are heavily influenced by the amount of organic matter dissolved or suspended in the water. Light attenuation in water is also a function of the wavelength. This means that different colours are attenuated at different rates, leading to colour degradation.with depth and distance. Red and orange light are attenuated faster, followed by yellows and greens. Blue is the least attenuated visible wavelength. === Artificial lighting === == Challenges == In high level computer vision, human structures are frequently used as image features for image matching in different applications. However, the sea bottom lacks such features, making it hard to find correspondences in two images. In order to be able to use a camera in the water, a watertight housing is required. However, refraction will happen at the water-glass and glass-air interface due to differences in density of the materials. This has the effect of introducing a non-linear image deformation. The motion of the vehicle presents another special challenge. Underwater vehicles are constantly moving due to currents and other phenomena. This introduces another uncertainty to algorithms, where small motions may appear in all directions. This can be specially important for video tracking. In order to reduce this problem image stabilization algorithms may be applied. == Relevant technology == === Image restoration === Image restoration< techniques are intended to model the degradation process and then invert it, obtaining the new image after solving. It is generally a complex approach that requires plenty of parameters that vary a lot between different water conditions. === Image enhancement === Image enhancement only tries to provide a visually more appealing image without taking the physical image formation process into account. These methods are usually simpler and less computational intensive. === Color correction === Various algorithms exist that perform automatic color correction. The UCM (Unsupervised Color Correction Method), for example, does this in the following steps: It firstly reduces the color cast by equalizing the color values. Then it enhances contrast by stretching the red histogram towards the maximum and finally saturation and intensity components are optimized. == Underwater stereo vision == It is usually assumed that stereo cameras have been calibrated previously, geometrically and radiometrically. This leads to the assumption that corresponding pixels should have the same color. However this can not be guaranteed in an underwater scene, because of dispersion and backscatter. However, it is possible to digitally model this phenomenon and create a virtual image with those effects removed == Other application fields == Imaging sonars have become more and more accessible and gained resolution, delivering better images. Sidescan sonars are used to produce complete maps of regions of the sea floor stitching together sequences of sonar images. However, sonar images often lack proper contrast and are degraded by artefacts and distortions due to noise, attitude changes of the AUV/ROV carrying the sonar or non uniform beam patterns. Another common problem with sonar computer vision is the comparatively low frame rate of sonar images.

  Read more →
• 

  Outline of deep learning

  The following outline is provided as an overview of, and topical guide to, deep learning: Deep learning is a subfield of machine learning and artificial intelligence based on artificial neural networks with multiple processing layers. It emphasizes representation learning and is widely used in areas such as computer vision, natural language processing, speech recognition, recommender systems, robotics, and generative artificial intelligence. == Ways to categorize deep learning == A field of study A branch of artificial intelligence A subfield of machine learning A subfield of computer science A form of representation learning A class of methods based on artificial neural networks An approach used in computational statistics == History == === Precursors === Cybernetics Perceptron Connectionism Neocognitron Backpropagation === Milestones === LeNet Long short-term memory Deep belief network AlexNet Sequence to sequence learning Generative adversarial network Residual neural network Transformer BERT Generative pre-trained transformer Diffusion model === Related histories === History of artificial intelligence History of machine learning Timeline of machine learning == Core concepts == == Learning settings == Supervised learning Unsupervised learning Self-supervised learning Semi-supervised learning Reinforcement learning Transfer learning Multitask learning Multimodal learning Online machine learning Continual learning == Common tasks == Image classification Object detection Image segmentation Automatic speech recognition Neural machine translation Question answering Automatic summarization Text-to-image model Protein structure prediction == Architectures == === Feedforward and convolutional architectures === Feedforward neural network Multilayer perceptron Convolutional neural network Radial basis function network Residual neural network U-Net === Recurrent and sequence architectures === Recurrent neural network Long short-term memory Gated recurrent unit Sequence to sequence learning Recursive neural network === Representation-learning architectures === Autoencoder Denoising autoencoder Sparse autoencoder Variational autoencoder Restricted Boltzmann machine Deep belief network === Attention and transformer architectures === Attention (machine learning) Transformer BERT Generative pre-trained transformer Vision transformer === Generative and probabilistic architectures === Autoregressive model Diffusion model Energy-based model Generative adversarial network Mixture of experts === Graph and memory architectures === Graph neural network Graph convolutional network Siamese network Neural Turing machine Memory network Echo state network Capsule neural network == Neural network components and techniques == Artificial neuron Activation function Rectified linear unit Sigmoid function Softmax function Embedding Convolution Pooling layer Attention Batch normalization Layer normalization Residual connections == Training and optimization == Backpropagation Gradient descent Stochastic gradient descent Adam optimization Learning rate Loss function Cross-entropy Mean squared error Regularization Dropout Early stopping Batch normalization Data augmentation Transfer learning Knowledge distillation Ensemble learning Curriculum learning == Datasets and benchmarks == CIFAR-10 ImageNet MNIST database Common Objects in Context (COCO) General Language Understanding Evaluation (GLUE) benchmark LibriSpeech SQuAD == Applications == === Computer vision === Computer vision Facial recognition system Image classification Image segmentation Medical imaging Object detection Optical character recognition === Natural language processing === Automatic summarization Chatbot Information retrieval Large language model Natural language processing Neural machine translation Question answering Sentiment analysis === Speech and audio === Automatic speech recognition Music information retrieval Speaker recognition Speech synthesis === Science and medicine === Bioinformatics Computational biology Drug discovery Medical diagnosis Protein structure prediction === Robotics and control === Autonomous car Computer game bot Control theory Robotics === Recommendation, search, and forecasting === Anomaly detection Forecasting Fraud detection Recommender system Search engine === Generative artificial intelligence === Deepfake Generative artificial intelligence Large language model Speech synthesis Text-to-image model === Computer graphics and video games === Deep Learning Anti-Aliasing (DLAA) Deep Learning Super Sampling (DLSS) == Hardware == AMD Instinct AMD XDNA Application-specific integrated circuit Deep learning processor, Neural processing unit (NPU), or Neural Engine Field-programmable gate array General-purpose computing on graphics processing units (GPGPU) Graphics processing unit NVIDIA Deep Learning Accelerator (NVDLA) Tensor processing unit Vision processing unit Wafer-scale integration === Supporting software platforms === CUDA Metal ROCm == Software == === Open-source frameworks and libraries === === Neural network software === EDLUT Emergent Encog JOONE Neuroph NeuroSolutions OpenNN Peltarion Synapse SNNS === Platforms, tools, and deployment === Amazon SageMaker Google Colab Hugging Face Kaggle Kubeflow MLflow ONNX OpenVINO TensorFlow Hub == Algorithms for deep learning and neural networks == Backpropagation Conjugate gradient method Generalized Hebbian algorithm Gradient descent Levenberg–Marquardt algorithm Perceptron Quasi-Newton method Wake-sleep algorithm == Methods and related topics == === Representation and metric learning === Contrastive learning Embedding Feature learning Manifold learning Metric learning === Generative modeling === Autoregressive model Diffusion model Generative adversarial network Generative model Variational inference === Efficient and scalable deep learning === Knowledge distillation Low-rank approximation Mixture of experts Quantization Sparsity === Reliability, safety, and interpretability === Adversarial machine learning AI alignment Algorithmic bias Catastrophic forgetting Differential privacy Explainable artificial intelligence Federated learning Hallucination (artificial intelligence) == Conferences and workshops == Annual Meeting of the Association for Computational Linguistics Conference on Computer Vision and Pattern Recognition Conference on Neural Information Processing Systems International Conference on Computer Vision International Conference on Learning Representations International Conference on Machine Learning == Organizations == === Research laboratories and institutions === Allen Institute for AI Alberta Machine Intelligence Institute European Laboratory for Learning and Intelligent Systems Google DeepMind Meta AI Mila Microsoft Research Vector Institute === Companies === Anthropic Cerebras Cohere DeepSeek Mistral AI OpenAI Stability AI xAI == Publications == === Books === Deep Learning – Ian Goodfellow and Yoshua Bengio Neural Networks and Deep Learning – Michael Nielsen Perceptrons – Marvin Minsky and Seymour Papert === Journals === IEEE Transactions on Neural Networks and Learning Systems Neural Networks Neural Computation == Influential persons ==

  Read more →
• 

  Case-based reasoning

  Case-based reasoning (CBR), broadly construed, is the process of solving new problems based on the solutions of similar past problems. In everyday life, an auto mechanic who fixes an engine by recalling another car that exhibited similar symptoms is using case-based reasoning. A lawyer who advocates a particular outcome in a trial based on legal precedents or a judge who creates case law is using case-based reasoning. So, too, an engineer copying working elements of nature (practicing biomimicry) is treating nature as a database of solutions to problems. Case-based reasoning is a prominent type of analogy solution making. It has been argued that case-based reasoning is not only a powerful method for computer reasoning, but also a pervasive behavior in everyday human problem solving; or, more radically, that all reasoning is based on past cases personally experienced. This view is related to prototype theory, which is most deeply explored in cognitive science. == Process == Case-based reasoning has been formalized for purposes of computer reasoning as a four-step process: Retrieve: Given a target problem, retrieve cases relevant to solving it from memory. A case consists of a problem, its solution, and, typically, annotations about how the solution was derived. For example, suppose Fred wants to prepare blueberry pancakes. Being a novice cook, the most relevant experience he can recall is one in which he successfully made plain pancakes. The procedure he followed for making the plain pancakes, together with justifications for decisions made along the way, constitutes Fred's retrieved case. Reuse: Map the solution from the previous case to the target problem. This may involve adapting the solution as needed to fit the new situation. In the pancake example, Fred must adapt his retrieved solution to include the addition of blueberries. Revise: Having mapped the previous solution to the target situation, test the new solution in the real world (or a simulation) and, if necessary, revise. Suppose Fred adapted his pancake solution by adding blueberries to the batter. After mixing, he discovers that the batter has turned blue – an undesired effect. This suggests the following revision: delay the addition of blueberries until after the batter has been ladled into the pan. Retain: After the solution has been successfully adapted to the target problem, store the resulting experience as a new case in memory. Fred, accordingly, records his new-found procedure for making blueberry pancakes, thereby enriching his set of stored experiences, and better preparing him for future pancake-making demands. == Comparison to other methods == At first glance, CBR may seem similar to the rule induction algorithms of machine learning. Like a rule-induction algorithm, CBR starts with a set of cases or training examples; it forms generalizations of these examples, albeit implicit ones, by identifying commonalities between a retrieved case and the target problem. If for instance a procedure for plain pancakes is mapped to blueberry pancakes, a decision is made to use the same basic batter and frying method, thus implicitly generalizing the set of situations under which the batter and frying method can be used. The key difference, however, between the implicit generalization in CBR and the generalization in rule induction lies in when the generalization is made. A rule-induction algorithm draws its generalizations from a set of training examples before the target problem is even known; that is, it performs eager generalization. For instance, if a rule-induction algorithm were given recipes for plain pancakes, Dutch apple pancakes, and banana pancakes as its training examples, it would have to derive, at training time, a set of general rules for making all types of pancakes. It would not be until testing time that it would be given, say, the task of cooking blueberry pancakes. The difficulty for the rule-induction algorithm is in anticipating the different directions in which it should attempt to generalize its training examples. This is in contrast to CBR, which delays (implicit) generalization of its cases until testing time – a strategy of lazy generalization. In the pancake example, CBR has already been given the target problem of cooking blueberry pancakes; thus it can generalize its cases exactly as needed to cover this situation. CBR therefore tends to be a good approach for rich, complex domains in which there are myriad ways to generalize a case. In law, there is often explicit delegation of CBR to courts, recognizing the limits of rule based reasons: limiting delay, limited knowledge of future context, limit of negotiated agreement, etc. While CBR in law and cognitively inspired CBR have long been associated, the former is more clearly an interpolation of rule based reasoning, and judgment, while the latter is more closely tied to recall and process adaptation. The difference is clear in their attitude toward error and appellate review. Another name for case-based reasoning in problem solving is symptomatic strategies. It does require à priori domain knowledge that is gleaned from past experience which established connections between symptoms and causes. This knowledge is referred to as shallow, compiled, evidential, history-based as well as case-based knowledge. This is the strategy most associated with diagnosis by experts. Diagnosis of a problem transpires as a rapid recognition process in which symptoms evoke appropriate situation categories. An expert knows the cause by virtue of having previously encountered similar cases. Case-based reasoning is the most powerful strategy, and that used most commonly. However, the strategy won't work independently with truly novel problems, or where deeper understanding of whatever is taking place is sought. An alternative approach to problem solving is the topographic strategy which falls into the category of deep reasoning. With deep reasoning, in-depth knowledge of a system is used. Topography in this context means a description or an analysis of a structured entity, showing the relations among its elements. Also known as reasoning from first principles, deep reasoning is applied to novel faults when experience-based approaches aren't viable. The topographic strategy is therefore linked to à priori domain knowledge that is developed from a more a fundamental understanding of a system, possibly using first-principles knowledge. Such knowledge is referred to as deep, causal or model-based knowledge. Hoc and Carlier noted that symptomatic approaches may need to be supported by topographic approaches because symptoms can be defined in diverse terms. The converse is also true – shallow reasoning can be used abductively to generate causal hypotheses, and deductively to evaluate those hypotheses, in a topographical search. == Criticism == Critics of CBR argue that it is an approach that accepts anecdotal evidence as its main operating principle. Without statistically relevant data for backing and implicit generalization, there is no guarantee that the generalization is correct. However, all inductive reasoning where data is too scarce for statistical relevance is inherently based on anecdotal evidence. == History == CBR traces its roots to the work of Roger Schank and his students at Yale University in the early 1980s. Schank's model of dynamic memory was the basis for the earliest CBR systems: Janet Kolodner's CYRUS and Michael Lebowitz's IPP. Other schools of CBR and closely allied fields emerged in the 1980s, which directed at topics such as legal reasoning, memory-based reasoning (a way of reasoning from examples on massively parallel machines), and combinations of CBR with other reasoning methods. In the 1990s, interest in CBR grew internationally, as evidenced by the establishment of an International Conference on Case-Based Reasoning in 1995, as well as European, German, British, Italian, and other CBR workshops. CBR technology has resulted in the deployment of a number of successful systems, the earliest being Lockheed's CLAVIER, a system for laying out composite parts to be baked in an industrial convection oven. CBR has been used extensively in applications such as the Compaq SMART system and has found a major application area in the health sciences, as well as in structural safety management. There is recent work that develops CBR within a statistical framework and formalizes case-based inference as a specific type of probabilistic inference. Thus, it becomes possible to produce case-based predictions equipped with a certain level of confidence. One description of the difference between CBR and induction from instances is that statistical inference aims to find what tends to make cases similar while CBR aims to encode what suffices to claim similarly.

  Read more →