AI Detector Free Online

AI Detector Free Online — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Zeuthen strategy

    Zeuthen strategy

    The Zeuthen strategy in cognitive science is a negotiation strategy used by some artificial agents. Its purpose is to measure the willingness to risk conflict. An agent will be more willing to risk conflict if it does not have much to lose in case that the negotiation fails. In contrast, an agent is less willing to risk conflict when it has more to lose. The value of a deal is expressed in its utility. An agent has much to lose when the difference between the utility of its current proposal and the conflict deal is high. When both agents use the monotonic concession protocol, the Zeuthen strategy leads them to agree upon a deal in the negotiation set. This set consists of all conflict free deals, which are individually rational and Pareto optimal, and the conflict deal, which maximizes the Nash product. The strategy was introduced in 1930 by the Danish economist Frederik Zeuthen. == Three key questions == The Zeuthen strategy answers three open questions that arise when using the monotonic concession protocol, namely: Which deal should be proposed at first? On any given round, who should concede? In case of a concession, how much should the agent concede? The answer to the first question is that any agent should start with its most preferred deal, because that deal has the highest utility for that agent. The second answer is that the agent with the smallest value of Risk(i,t) concedes, because the agent with the lowest utility for the conflict deal profits most from avoiding conflict. To the third question, the Zeuthen strategy suggests that the conceding agent should concede just enough raise its value of Risk(i,t) just above that of the other agent. This prevents the conceding agent to have to concede again in the next round. == Risk == Risk ( i , t ) = { 1 U i ( δ ( i , t ) ) = 0 U i ( δ ( i , t ) ) − U i ( δ ( j , t ) ) U i ( δ ( i , t ) ) otherwise {\displaystyle {\text{Risk}}(i,t)={\begin{cases}1&U_{i}(\delta (i,t))=0\\{\frac {U_{i}(\delta (i,t))-U_{i}(\delta (j,t))}{U_{i}(\delta (i,t))}}&{\text{otherwise}}\end{cases}}} Risk(i,t) is a measurement of agent i's willingness to risk conflict. The risk function formalizes the notion that an agent's willingness to risk conflict is the ratio of the utility that agent would lose by accepting the other agent's proposal to the utility that agent would lose by causing a conflict. Agent i is said to be using a rational negotiation strategy if at any step t + 1 that agent i sticks to his last proposal, Risk(i,t) > Risk(j,t). == Sufficient concession == If agent i makes a sufficient concession in the next step, then, assuming that agent j is using a rational negotiation strategy, if agent j does not concede in the next step, he must do so in the step after that. The set of all sufficient concessions of agent i at step t is denoted SC(i, t). == Minimal sufficient concession == δ ′ = arg ⁡ max δ ∈ S C ( A , t ) { U A ( δ ) } {\displaystyle \delta '=\arg \max _{\delta \in {SC(A,t)}}\{U_{A}(\delta )\}} is the minimal sufficient concession of agent A in step t. Agent A begins the negotiation by proposing δ ( A , 0 ) = arg ⁡ max δ ∈ N S U A ( δ ) {\displaystyle \delta (A,0)=\arg \max _{\delta \in {NS}}U_{A}(\delta )} and will make the minimal sufficient concession in step t + 1 if and only if Risk(A,t) ≤ Risk(B,t). Theorem If both agents are using Zeuthen strategies, then they will agree on δ = arg ⁡ max δ ′ ∈ N S { π ( δ ′ ) } , {\displaystyle \delta =\arg \max _{\delta '\in {NS}}\{\pi (\delta ')\},} that is, the deal which maximizes the Nash product. Proof Let δA = δ(A,t). Let δB = δ(B,t). According to the Zeuthen strategy, agent A will concede at step t {\displaystyle t} if and only if R i s k ( A , t ) ≤ R i s k ( B , t ) . {\displaystyle Risk(A,t)\leq Risk(B,t).} That is, if and only if U A ( δ A ) − U A ( δ B ) U A ( δ A ) ≤ U B ( δ B ) − U B ( δ A ) U B ( δ B ) {\displaystyle {\frac {U_{A}(\delta _{A})-U_{A}(\delta _{B})}{U_{A}(\delta _{A})}}\leq {\frac {U_{B}(\delta _{B})-U_{B}(\delta _{A})}{U_{B}(\delta _{B})}}} U B ( δ B ) ( U A ( δ A ) − U A ( δ B ) ) ≤ U A ( δ A ) ( U B ( δ B ) − U B ( δ A ) ) {\displaystyle U_{B}(\delta _{B})(U_{A}(\delta _{A})-U_{A}(\delta _{B}))\leq U_{A}(\delta _{A})(U_{B}(\delta _{B})-U_{B}(\delta _{A}))} U A ( δ A ) U B ( δ B ) − U A ( δ B ) U B ( δ B ) ≤ U A ( δ A ) U B ( δ B ) − U A ( δ A ) U B ( δ A ) {\displaystyle U_{A}(\delta _{A})U_{B}(\delta _{B})-U_{A}(\delta _{B})U_{B}(\delta _{B})\leq U_{A}(\delta _{A})U_{B}(\delta _{B})-U_{A}(\delta _{A})U_{B}(\delta _{A})} − U A ( δ B ) U B ( δ B ) ≤ − U A ( δ A ) U B ( δ A ) {\displaystyle -U_{A}(\delta _{B})U_{B}(\delta _{B})\leq -U_{A}(\delta _{A})U_{B}(\delta _{A})} U A ( δ A ) U B ( δ A ) ≤ U A ( δ B ) U B ( δ B ) {\displaystyle U_{A}(\delta _{A})U_{B}(\delta _{A})\leq U_{A}(\delta _{B})U_{B}(\delta _{B})} π ( δ A ) ≤ π ( δ B ) {\displaystyle \pi (\delta _{A})\leq \pi (\delta _{B})} Thus, Agent A will concede if and only if δ A {\displaystyle \delta _{A}} does not yield the larger product of utilities. Therefore, the Zeuthen strategy guarantees a final agreement that maximizes the Nash Product.

    Read more →
  • Weka (software)

    Weka (software)

    Waikato Environment for Knowledge Analysis (Weka) is a collection of machine learning and data analysis free software licensed under the GNU General Public License. It was developed at the University of Waikato, New Zealand, and is the companion software to the book "Data Mining: Practical Machine Learning Tools and Techniques". == Description == Weka contains a collection of visualization tools and algorithms for data analysis and predictive modeling, together with graphical user interfaces for easy access to these functions. The original non-Java version of Weka was a Tcl/Tk front-end to (mostly third-party) modeling algorithms implemented in other programming languages, plus data preprocessing utilities in C, and a makefile-based system for running machine learning experiments. This original version was primarily designed as a tool for analyzing data from agricultural domains, but the more recent fully Java-based version (Weka 3), for which development started in 1997, is now used in many different application areas, in particular for educational purposes and research. Advantages of Weka include: Free availability under the GNU General Public License. Portability, since it is fully implemented in the Java programming language and thus runs on almost any modern computing platform. A comprehensive collection of data preprocessing and modeling techniques. Ease of use due to its graphical user interfaces. Weka supports several standard data mining tasks, more specifically, data preprocessing, clustering, classification, regression, visualization, and feature selection. Input to Weka is expected to be formatted according the Attribute-Relational File Format and with the filename bearing the .arff extension. All of Weka's techniques are predicated on the assumption that the data is available as one flat file or relation, where each data point is described by a fixed number of attributes (normally, numeric or nominal attributes, but some other attribute types are also supported). Weka provides access to SQL databases using Java Database Connectivity and can process the result returned by a database query. Weka provides access to deep learning with Deeplearning4j. It is not capable of multi-relational data mining, but there is separate software for converting a collection of linked database tables into a single table that is suitable for processing using Weka. Another important area that is currently not covered by the algorithms included in the Weka distribution is sequence modeling. == Extension packages == In version 3.7.2, a package manager was added to allow the easier installation of extension packages. Some functionality that used to be included with Weka prior to this version has since been moved into such extension packages, but this change also makes it easier for others to contribute extensions to Weka and to maintain the software, as this modular architecture allows independent updates of the Weka core and individual extensions. == History == In 1993, the University of Waikato in New Zealand began development of the original version of Weka, which became a mix of Tcl/Tk, C, and makefiles. In 1997, the decision was made to redevelop Weka from scratch in Java, including implementations of modeling algorithms. In 2005, Weka received the SIGKDD Data Mining and Knowledge Discovery Service Award. In 2006, Pentaho Corporation acquired an exclusive licence to use Weka for business intelligence. It forms the data mining and predictive analytics component of the Pentaho business intelligence suite. Pentaho has since been acquired by Hitachi Vantara, and Weka now underpins the PMI (Plugin for Machine Intelligence) open source component. == Related tools == Auto-WEKA is an automated machine learning system for Weka. Environment for DeveLoping KDD-Applications Supported by Index-Structures (ELKI) is a similar project to Weka with a focus on cluster analysis, i.e., unsupervised methods. H2O.ai is an open-source data science and machine learning platform KNIME is a machine learning and data mining software implemented in Java. Massive Online Analysis (MOA) is an open-source project for large scale mining of data streams, also developed at the University of Waikato in New Zealand. Neural Designer is a data mining software based on deep learning techniques written in C++. Orange is a similar open-source project for data mining, machine learning and visualization based on scikit-learn. RapidMiner is a commercial machine learning framework implemented in Java which integrates Weka. scikit-learn is a popular machine learning library in Python.

    Read more →
  • Neural Networks (journal)

    Neural Networks (journal)

    Neural Networks is a monthly peer-reviewed scientific journal and an official journal of the International Neural Network Society, European Neural Network Society, and Japanese Neural Network Society. == History == The journal was established in 1988 and is published by Elsevier. It covers all aspects of research on artificial neural networks. The founding editor-in-chief was Stephen Grossberg (Boston University). The current editors-in-chief are DeLiang Wang (Ohio State University) and Taro Toyoizumi (RIKEN Center for Brain Science). == Abstracting and indexing == The journal is abstracted and indexed in Scopus and the Science Citation Index Expanded. According to the Journal Citation Reports, the journal has a 2022 impact factor of 7.8.

    Read more →
  • Log-linear model

    Log-linear model

    A log-linear model is a mathematical model that takes the form of a function whose logarithm equals a linear combination of the parameters of the model, which makes it possible to apply (possibly multivariate) linear regression. That is, it has the general form exp ⁡ ( c + ∑ i w i f i ( X ) ) {\displaystyle \exp \left(c+\sum _{i}w_{i}f_{i}(X)\right)} , in which the fi(X) are quantities that are functions of the variable X, in general a vector of values, while c and the wi stand for the model parameters. The term may specifically be used for: A log-linear plot or graph, which is a type of semi-log plot. Poisson regression for contingency tables, a type of generalized linear model. The specific applications of log-linear models are where the output quantity lies in the range 0 to ∞, for values of the independent variables X, or more immediately, the transformed quantities fi(X) in the range −∞ to +∞. This may be contrasted to logistic models, similar to the logistic function, for which the output quantity lies in the range 0 to 1. Thus the contexts where these models are useful or realistic often depends on the range of the values being modelled.

    Read more →
  • TensorFlow Hub

    TensorFlow Hub

    TensorFlow Hub (also styled TF Hub) is an open-source machine learning library and online repository that provides TensorFlow model components, called modules. It is maintained by Google as part of the TensorFlow ecosystem and allows developers to discover, publish, and reuse pretrained models for tasks such as computer vision, natural language processing, and transfer learning. == Overview == TensorFlow Hub provides a central platform where developers and researchers can access pre-trained models and integrate them directly into TensorFlow workflows. Each module encapsulates a computation graph and its trained weights, with standardized input and output signatures. Modules can be loaded using the hub.load() function or through Keras integration via hub.KerasLayer, enabling users to perform transfer learning or feature extraction. == History == TensorFlow Hub was announced by Google in March 2018, with the first public version released shortly after. Its introduction coincided with the growing adoption of transfer learning techniques and the need for standardized model packaging. Over time, the hub expanded to include models such as the BERT family, MobileNet, EfficientNet, and the Universal Sentence Encoder. In 2020, research on “Regret selection in TensorFlow Hub” explored the problem of identifying optimal models for downstream tasks given a large repository of alternatives. == Applications == TensorFlow Hub hosts a variety of models across machine learning domains: Natural language processing: BERT, ALBERT language model, and Universal Sentence Encoder. Computer vision: ResNet, Inception (deep learning), MobileNet, EfficientNet. Speech and audio: spectrogram feature extractors and automatic speech recognition models. Multilingual embeddings: cross-lingual and sentence-level representations for machine translation and semantic similarity. Modules are widely used in education, academic research, and industry for prototyping and production deployment.

    Read more →
  • ARKA descriptors in QSAR

    ARKA descriptors in QSAR

    In computational chemistry and cheminformatics, ARKA descriptors in QSAR are a class of molecular descriptors used in quantitative structure–activity relationship (QSAR) modeling (or related approaches such as QSPR and QSTR), a computational method for predicting the biological activity or toxicity of chemical compounds based on their molecular structure. Molecular descriptors are numerical values that summarize information about a molecule's structure, topology, geometry, or physicochemical properties in a form suitable for machine learning or statistical modeling. ARKA (Arithmetic Residuals in K-Groups Analysis) descriptors differ from traditional descriptors by encoding atomic-level information through recursive autoregression techniques, which aim to capture subtle structural patterns and improve predictive accuracy. They are designed to be both interpretable and well-suited to modeling nonlinear relationships in QSAR studies. == Comparisons == While QSAR is essentially a similarity-based approach, the occurrence of activity/property cliffs may greatly reduce the predictive accuracy of the developed models. The novel Arithmetic Residuals in K-groups Analysis (ARKA) approach is a supervised dimensionality reduction technique developed by the DTC Laboratory, Jadavpur University that can easily identify activity cliffs in a data set. Activity cliffs are similar in their structures but differ considerably in their activity. The basic idea of the ARKA descriptors is to group the conventional QSAR descriptors based on a predefined criterion and then assign weightage to each descriptor in each group. ARKA descriptors have also been used to develop classification-based and regression-based QSAR models with acceptable quality statistics. The ARKA descriptors have been used for the identification of activity cliffs in QSAR studies and/or model development by multiple researchers. A tutorial presentation on the ARKA descriptors is available. Recently a multi-class ARKA framework has been proposed for improved q-RASAR model generation.

    Read more →
  • Variable kernel density estimation

    Variable kernel density estimation

    In statistics, adaptive or "variable-bandwidth" kernel density estimation is a form of kernel density estimation in which the size of the kernels used in the estimate are varied depending upon either the location of the samples or the location of the test point. It is a particularly effective technique when the sample space is multi-dimensional. == Rationale == Given a set of samples, { x → i } {\displaystyle \lbrace {\vec {x}}_{i}\rbrace } , we wish to estimate the density, P ( x → ) {\displaystyle P({\vec {x}})} , at a test point, x → {\displaystyle {\vec {x}}} : P ( x → ) ≈ W n h D {\displaystyle P({\vec {x}})\approx {\frac {W}{nh^{D}}}} W = ∑ i = 1 n w i {\displaystyle W=\sum _{i=1}^{n}w_{i}} w i = K ( x → − x → i h ) {\displaystyle w_{i}=K\left({\frac {{\vec {x}}-{\vec {x}}_{i}}{h}}\right)} where n is the number of samples, K is the "kernel", h is its width and D is the number of dimensions in x → {\displaystyle {\vec {x}}} . The kernel can be thought of as a simple, linear filter. Using a fixed filter width may mean that in regions of low density, all samples will fall in the tails of the filter with very low weighting, while regions of high density will find an excessive number of samples in the central region with weighting close to unity. To fix this problem, we vary the width of the kernel in different regions of the sample space. There are two methods of doing this: balloon and pointwise estimation. In a balloon estimator, the kernel width is varied depending on the location of the test point. In a pointwise estimator, the kernel width is varied depending on the location of the sample. For multivariate estimators, the parameter, h, can be generalized to vary not just the size, but also the shape of the kernel. This more complicated approach will not be covered here. == Balloon estimators == A common method of varying the kernel width is to make it inversely proportional to the density at the test point: h = k [ n P ( x → ) ] 1 / D {\displaystyle h={\frac {k}{\left[nP({\vec {x}})\right]^{1/D}}}} where k is a constant. If we back-substitute the estimated PDF, and assuming a Gaussian kernel function, we can show that W is a constant: W = k D ( 2 π ) D / 2 {\displaystyle W=k^{D}(2\pi )^{D/2}} A similar derivation holds for any kernel whose normalising function is of the order hD, although with a different constant factor in place of the (2 π)D/2 term. This produces a generalization of the k-nearest neighbour algorithm. That is, a uniform kernel function will return the KNN technique. There are two components to the error: a variance term and a bias term. The variance term is given as: e 1 = P ∫ K 2 n h D {\displaystyle e_{1}={\frac {P\int K^{2}}{nh^{D}}}} . The bias term is found by evaluating the approximated function in the limit as the kernel width becomes much larger than the sample spacing. By using a Taylor expansion for the real function, the bias term drops out: e 2 = h 2 n ∇ 2 P {\displaystyle e_{2}={\frac {h^{2}}{n}}\nabla ^{2}P} An optimal kernel width that minimizes the error of each estimate can thus be derived. == Use for statistical classification == The method is particularly effective when applied to statistical classification. There are two ways we can proceed: the first is to compute the PDFs of each class separately, using different bandwidth parameters, and then compare them as in Taylor. Alternatively, we can divide up the sum based on the class of each sample: P ( j , x → ) ≈ 1 n ∑ i = 1 , c i = j n w i {\displaystyle P(j,{\vec {x}})\approx {\frac {1}{n}}\sum _{i=1,c_{i}=j}^{n}w_{i}} where ci is the class of the ith sample. The class of the test point may be estimated through maximum likelihood.

    Read more →
  • Julia (programming language)

    Julia (programming language)

    Julia is a dynamic general-purpose programming language. As a high-level language, distinctive aspects of Julia's design include a type system with parametric polymorphism, the use of multiple dispatch as a core programming paradigm, just-in-time compilation and a parallel garbage collection implementation. Notably, Julia does not support classes with encapsulated methods but instead relies on the types of all of a function's arguments to determine which method will be called. By default, Julia is run similarly to scripting languages, using its runtime, and allows for interactions, but Julia programs can also be compiled to small binary standalone executables (or to small libraries for e.g. Python), with e.g. the JuliaC.jl compiler. Julia programs can reuse libraries from other languages, and vice versa. Julia has interoperability with C, C++, Fortran, Rust, Python, and R. Additionally, some Julia packages have bindings to be used from Python and R as libraries. Julia is supported by programmer tools like IDEs (see below) and by notebooks like Pluto.jl, Jupyter, and since 2025, Google Colab officially supports Julia natively. Julia is sometimes used in embedded systems (e.g. has been used in a satellite in space on a Raspberry Pi Compute Module 4; 64-bit Pis work best with Julia, and Julia is supported in Raspbian). == History == Work on Julia began in 2009, when Jeff Bezanson, Stefan Karpinski, Viral B. Shah, and Alan Edelman set out to create a free language that was both high-level and fast. On 14 February 2012, the team launched a website with a blog post explaining the language's mission. In an interview with InfoWorld in April 2012, Karpinski said about the name of the language, Julia: "There's no good reason, really. It just seemed like a pretty name." Bezanson said he chose the name on the recommendation of a friend, then years later wrote: Maybe julia stands for "Jeff's uncommon lisp is automated"? Julia's syntax is stable, since version 1.0 in 2018, and Julia has a backward compatibility guarantee for 1.x and also a stability promise for the documented (stable) API, while in the years before in the early development prior to 0.7 the syntax (and semantics) was changed in new versions. All of the (registered package) ecosystem uses the new and improved syntax, and in most cases relies on new APIs that have been added regularly, and in some cases minor additional syntax added in a forward compatible way e.g. in Julia 1.7. In the 10 years since the 2012 launch of pre-1.0 Julia, the community has grown. The Julia package ecosystem has over 11.8 million lines of code (including docs and tests). The JuliaCon academic conference for Julia users and developers has been held annually since 2014 with JuliaCon2020 welcoming over 28,900 unique viewers, and then JuliaCon2021 breaking all previous records (with more than 300 JuliaCon2021 presentations available for free on YouTube, up from 162 the year before), and 43,000 unique viewers during the conference. Three of the Julia co-creators are the recipients of the 2019 James H. Wilkinson Prize for Numerical Software (awarded every four years) "for the creation of Julia, an innovative environment for the creation of high-performance tools that enable the analysis and solution of computational science problems." Also, Alan Edelman, professor of applied mathematics at MIT, has been selected to receive the 2019 IEEE Computer Society Sidney Fernbach Award "for outstanding breakthroughs in high-performance computing, linear algebra, and computational science and for contributions to the Julia programming language." Version 0.3 was released in August 2014. Both Julia 0.7 and version 1.0 were released on 8 August 2018. Julia 1.4 added syntax for generic array indexing to handle e.g. 0-based arrays. The memory model was also changed. Julia 1.5 released in August 2020 added record and replay debugging support, for Mozilla's rr tool. The release changed the behavior in the REPL (to soft scope) to the one used in Jupyter, but keeps full compatible with non-REPL code (that retains hard scope). Julia 1.6 was the largest release since 1.0, and it was the long-term support (LTS) version for the longest time. Since Julia 1.7 development is back to time-based releases, and it was released in November 2021 with e.g. a new default random-number generator and Julia 1.7.3 fixed at least one security issue. Julia 1.8 added options for hiding source code when compiling Julia source code to executables. Julia 1.9 has added the ability to precompile packages to native machine code, done automatically; to improve precompilation of packages a new package PrecompileTools.jl was introduced, for use by package developers. Julia 1.10 was released on 25 December 2023 with new features such as parallel garbage collection. Julia 1.11 was released on 7 October 2024, and with it 1.10.5 became the next long-term support (LTS) version (i.e. those became the only two supported versions), since replaced by 1.10.10 released on 27 June, and 1.6 is no longer an LTS version. Julia 1.11 adds e.g. the new public keyword to signal safe public API (Julia users are advised to use such API, not internals, of Julia or packages, and package authors advised to use the keyword, generally indirectly, e.g. prefixed with the @compat macro, from Compat.jl, to also support older Julia versions, at least the LTS version). Julia 1.12 was released on 7 October 2025 (and 1.12.5 on 9 February 2026), and with it a JuliaC.jl package including the juliac compiler that works with it, for making rather small binary executables (much smaller than was possible before; through the use of new so-called trimming feature). Julia 1.10 LTS is an officially still-supported branch, but the 1.11 branch has also been maintained after 1.12 release, with 1.11.8 released and then 1.11.9 released on 8 February 2026. === JuliaCon === Since 2014, the Julia Community has hosted an annual Julia Conference focused on developers and users. The first JuliaCon took place in Chicago and kickstarted the annual occurrence of the conference. Since 2014, the conference has taken place across a number of locations including MIT and the University of Maryland, Baltimore. The event audience has grown from a few dozen people to over 28,900 unique attendees during JuliaCon 2020, which took place virtually. JuliaCon 2021 also took place virtually with keynote addresses from professors William Kahan, the primary architect of the IEEE 754 floating-point standard (which virtually all CPUs and languages, including Julia, use), Jan Vitek, Xiaoye Sherry Li, and Soumith Chintala, a co-creator of PyTorch. JuliaCon grew to 43,000 unique attendees and more than 300 presentations (still freely accessible, plus for older years). JuliaCon 2022 will also be virtual held between July 27 and July 29, 2022, for the first time in several languages, not just in English. === Sponsors === The Julia language became a NumFOCUS fiscally sponsored project in 2014 in an effort to ensure the project's long-term sustainability. Jeremy Kepner at MIT Lincoln Laboratory was the founding sponsor of the Julia project in its early days. In addition, funds from the Gordon and Betty Moore Foundation, the Alfred P. Sloan Foundation, Intel, and agencies such as NSF, DARPA, NIH, NASA, and FAA have been essential to the development of Julia. Mozilla, the maker of Firefox web browser, with its research grants for H1 2019, sponsored "a member of the official Julia team" for the project "Bringing Julia to the Browser", meaning to Firefox and other web browsers. The Julia language is also supported by individual donors on GitHub. === The Julia company === JuliaHub, Inc. was founded in 2015 as Julia Computing, Inc. by Viral B. Shah, Deepak Vinchhi, Alan Edelman, Jeff Bezanson, Stefan Karpinski and Keno Fischer. In June 2017, Julia Computing raised US$4.6 million in seed funding from General Catalyst and Founder Collective, the same month was "granted $910,000 by the Alfred P. Sloan Foundation to support open-source Julia development, including $160,000 to promote diversity in the Julia community", and in December 2019 the company got $1.1 million funding from the US government to "develop a neural component machine learning tool to reduce the total energy consumption of heating, ventilation, and air conditioning (HVAC) systems in buildings". In July 2021, Julia Computing announced they raised a $24 million Series A round led by Dorilton Ventures, which also owns Formula One team Williams Racing, that partnered with Julia Computing. Williams' Commercial Director said: "Investing in companies building best-in-class cloud technology is a strategic focus for Dorilton and Julia's versatile platform, with revolutionary capabilities in simulation and modelling, is hugely relevant to our business. We look forward to embedding Julia Computing in the world's most technologically advanced sport". In June 2023, JuliaHub received (again, now

    Read more →
  • The 2028 Global Intelligence Crisis

    The 2028 Global Intelligence Crisis

    The 2028 Global Intelligence Crisis is a report authored by James van Geelen and Alap Shah and published by Citrini Research in February 2026, on the impact of artificial intelligence on humanity's future. Written in the form of a scenario analysis, it was viewed millions of times online and reportedly caused a fall in the stock market prices of major tech and financial firms. It also received criticism among others, for its allegedly flawed economic logic. The 'thought exercise', as the authors called it, painted a gloomy picture for the near future, where outputs keep growing while consumer's ability to spend collapses. "...driven by ai agents that don’t sleep, take sick days or require health insurance”, "outputs that are shown in national accounts increases, "but never circulates through the real economy"(which the report calls 'Ghost GDP'), the authors argued. In other words, the authors predict a scenario where the owners of the AI firms will accumulate a vast fortune but there will be scant demand from consumers as AI would cause massive unemployment. The authors caution the reader that what they make is a scenario and not a prediction. In the scenario they visualise, any service whose value proposition is “I will navigate complexity that you find tedious” is getting disrupted. The reports argues that the unique ability of human beings to analyse, decide, create, persuade, and coordinate was “the thing that could not be replicated at scale,” and call the historical scarcity of this precious entity 'friction'. When this friction becomes zero, a gamut of changes occur which then triggers a cascading of changes across the economy. ”Travel booking platforms are an early casualty; Financial advice. tax prep., and routine legal work follow suit. National unemployment rate go as high 10.2% and the S&P 500 goes for a massive 38% peak-to-trough crash. In contrast to the previous technological revolutions the high-earning professionals suffers more and get forced to take up roles in the gig economy. Labour supply becomes abundant and this cuts wages all across the economy. The dent in income for the employees then affects other sectors of the economy such as the residential mortgage market. The losses for the software companies triggers loan defaults and heralds peril for the private credit sector.

    Read more →
  • State–action–reward–state–action

    State–action–reward–state–action

    State–action–reward–state–action (SARSA) is an algorithm for learning a Markov decision process policy, used in the reinforcement learning area of machine learning. It was proposed by Rummery and Niranjan in a technical note with the name "Modified Connectionist Q-Learning" (MCQ-L). The alternative name SARSA, proposed by Rich Sutton, was only mentioned as a footnote. This name reflects the fact that the main function for updating the Q-value depends on the current state of the agent "S1", the action the agent chooses "A1", the reward "R2" the agent gets for choosing this action, the state "S2" that the agent enters after taking that action, and finally the next action "A2" the agent chooses in its new state. The acronym for the quintuple (St, At, Rt+1, St+1, At+1) is SARSA. Some authors use a slightly different convention and write the quintuple (St, At, Rt, St+1, At+1), depending on which time step the reward is formally assigned. The rest of the article uses the former convention. == Algorithm == Q new ( S t , A t ) ← ( 1 − α ) Q ( S t , A t ) + α [ R t + 1 + γ Q ( S t + 1 , A t + 1 ) ] {\displaystyle Q^{\textrm {new}}(S_{t},A_{t})\leftarrow (1-\alpha )Q(S_{t},A_{t})+\alpha \,[R_{t+1}+\gamma \,Q(S_{t+1},A_{t+1})]} A SARSA agent interacts with the environment and updates the policy based on actions taken, hence this is known as an on-policy learning algorithm. The Q value for a state-action is updated by an error, adjusted by the learning rate α. Q values represent the possible reward received in the next time step for taking action a in state s, plus the discounted future reward received from the next state-action observation. Watkin's Q-learning updates an estimate of the optimal state-action value function Q ∗ {\displaystyle Q^{}} based on the maximum reward of available actions. While SARSA learns the Q values associated with taking the policy it follows itself, Watkin's Q-learning learns the Q values associated with taking the optimal policy while following an exploration/exploitation policy. Some optimizations of Watkin's Q-learning may be applied to SARSA. == Hyperparameters == === Learning rate (alpha) === The learning rate determines to what extent newly acquired information overrides old information. A factor of 0 will make the agent not learn anything, while a factor of 1 would make the agent consider only the most recent information. === Discount factor (gamma) === The discount factor determines the importance of future rewards. A discount factor of 0 makes the agent "opportunistic", or "myopic", e.g., by only considering current rewards, while a factor approaching 1 will make it strive for a long-term high reward. If the discount factor meets or exceeds 1, the Q {\displaystyle Q} values may diverge. === Initial conditions (Q(S0, A0)) === Since SARSA is an iterative algorithm, it implicitly assumes an initial condition before the first update occurs. A high (infinite) initial value, also known as "optimistic initial conditions", can encourage exploration: no matter what action takes place, the update rule causes it to have higher values than the other alternative, thus increasing their choice probability. In 2013 it was suggested that the first reward r {\displaystyle r} could be used to reset the initial conditions. According to this idea, the first time an action is taken the reward is used to set the value of Q {\displaystyle Q} . This allows immediate learning in case of fixed deterministic rewards. This resetting-of-initial-conditions (RIC) approach seems to be consistent with human behavior in repeated binary choice experiments.

    Read more →
  • Q-learning

    Q-learning

    Q-learning is a reinforcement learning algorithm that trains an agent to assign values to its possible actions based on its current state, without requiring a model of the environment (model-free). It can handle problems with stochastic transitions and rewards without requiring adaptations. For example, in a grid maze, an agent learns to reach an exit worth 10 points. At a junction, Q-learning might assign a higher value to moving right than left if right gets to the exit faster, improving this choice by trying both directions over time. For any finite Markov decision process, Q-learning finds an optimal policy in the sense of maximizing the expected value of the total reward over any and all successive steps, starting from the current state. Q-learning can identify an optimal action-selection policy for any given finite Markov decision process, given infinite exploration time and a partly random policy. "Q" refers to the function that the algorithm computes: the expected reward—that is, the quality—of an action taken in a given state. == Reinforcement learning == Reinforcement learning involves an agent, a set of states S {\displaystyle {\mathcal {S}}} , and a set A {\displaystyle {\mathcal {A}}} of actions per state. By performing an action a ∈ A {\displaystyle a\in {\mathcal {A}}} , the agent transitions from state to state. Executing an action in a specific state provides the agent with a reward (a numerical score). The goal of the agent is to maximize its total reward. It does this by adding the maximum reward attainable from future states to the reward for achieving its current state, effectively influencing the current action by the potential future reward. This potential reward is a weighted sum of expected values of the rewards of all future steps starting from the current state. As an example, consider the process of boarding a train, in which the reward is measured by the negative of the total time spent boarding (alternatively, the cost of boarding the train is equal to the boarding time). One strategy is to enter the train door as soon as they open, minimizing the initial wait time for yourself. If the train is crowded, however, then you will have a slow entry after the initial action of entering the door as people are fighting you to depart the train as you attempt to board. The total boarding time, or cost, is then: 0 seconds wait time + 15 seconds fight time On the next day, by random chance (exploration), you decide to wait and let other people depart first. This initially results in a longer wait time. However, less time is spent fighting the departing passengers. Overall, this path has a higher reward than that of the previous day, since the total boarding time is now: 5 second wait time + 0 second fight time Through exploration, despite the initial (patient) action resulting in a larger cost (or negative reward) than in the forceful strategy, the overall cost is lower, thus revealing a more rewarding strategy. == Algorithm == After Δ t {\displaystyle \Delta t} steps into the future the agent will decide some next step. The weight for this step is calculated as γ Δ t {\displaystyle \gamma ^{\Delta t}} , where γ {\displaystyle \gamma } (the discount factor) is a number between 0 and 1 ( 0 ≤ γ ≤ 1 {\displaystyle 0\leq \gamma \leq 1} ). Assuming γ < 1 {\displaystyle \gamma <1} , it has the effect of valuing rewards received earlier higher than those received later (reflecting the value of a "good start"). γ {\displaystyle \gamma } may also be interpreted as the probability to succeed (or survive) at every step Δ t {\displaystyle \Delta t} . The algorithm, therefore, has a function that calculates the quality of a state–action combination: Q : S × A → R {\displaystyle Q:{\mathcal {S}}\times {\mathcal {A}}\to \mathbb {R} } . Before learning begins, ⁠ Q {\displaystyle Q} ⁠ is initialized to a possibly arbitrary fixed value (chosen by the programmer). Then, at each time t {\displaystyle t} the agent selects an action A t {\displaystyle A_{t}} , observes a reward R t + 1 {\displaystyle R_{t+1}} , enters a new state S t + 1 {\displaystyle S_{t+1}} (that may depend on both the previous state S t {\displaystyle S_{t}} and the selected action), and Q {\displaystyle Q} is updated. The core of the algorithm is a Bellman equation as a simple value iteration update, using the weighted average of the current value and the new information: Q n e w ( S t , A t ) ← ( 1 − α ⏟ learning rate ) ⋅ Q ( S t , A t ) ⏟ current value + α ⏟ learning rate ⋅ ( R t + 1 ⏟ reward + γ ⏟ discount factor ⋅ max a Q ( S t + 1 , a ) ⏟ estimate of optimal future value ⏟ new value (temporal difference target) ) {\displaystyle Q^{new}(S_{t},A_{t})\leftarrow (1-\underbrace {\alpha } _{\text{learning rate}})\cdot \underbrace {Q(S_{t},A_{t})} _{\text{current value}}+\underbrace {\alpha } _{\text{learning rate}}\cdot {\bigg (}\underbrace {\underbrace {R_{t+1}} _{\text{reward}}+\underbrace {\gamma } _{\text{discount factor}}\cdot \underbrace {\max _{a}Q(S_{t+1},a)} _{\text{estimate of optimal future value}}} _{\text{new value (temporal difference target)}}{\bigg )}} where R t + 1 {\displaystyle R_{t+1}} is the reward received when moving from the state S t {\displaystyle S_{t}} to the state S t + 1 {\displaystyle S_{t+1}} , and α {\displaystyle \alpha } is the learning rate ( 0 < α ≤ 1 ) {\displaystyle (0<\alpha \leq 1)} . Note that Q n e w ( S t , A t ) {\displaystyle Q^{new}(S_{t},A_{t})} is the sum of three terms: ( 1 − α ) Q ( S t , A t ) {\displaystyle (1-\alpha )Q(S_{t},A_{t})} : the current value (weighted by one minus the learning rate) α R t + 1 {\displaystyle \alpha \,R_{t+1}} : the reward R t + 1 {\displaystyle R_{t+1}} to obtain if action A t {\displaystyle A_{t}} is taken when in state S t {\displaystyle S_{t}} (weighted by learning rate) α γ max a Q ( S t + 1 , a ) {\displaystyle \alpha \gamma \max _{a}Q(S_{t+1},a)} : the maximum reward that can be obtained from state S t + 1 {\displaystyle S_{t+1}} (weighted by learning rate and discount factor) An episode of the algorithm ends when state S t + 1 {\displaystyle S_{t+1}} is a final or terminal state. However, Q-learning can also learn in non-episodic tasks (as a result of the property of convergent infinite series). If the discount factor is lower than 1, the action values are finite even if the problem can contain infinite loops or paths. For all final states s f {\displaystyle s_{f}} , Q ( s f , a ) {\displaystyle Q(s_{f},a)} is never updated, but is set to the reward value r {\displaystyle r} observed for state s f {\displaystyle s_{f}} . In most cases, Q ( s f , a ) {\displaystyle Q(s_{f},a)} can be taken to equal zero. == Influence of variables == === Learning rate === The learning rate or step size determines to what extent newly acquired information overrides old information. A factor of 0 makes the agent learn nothing (exclusively exploiting prior knowledge), while a factor of 1 makes the agent consider only the most recent information (ignoring prior knowledge to explore possibilities). In fully deterministic environments, a learning rate of α t = 1 {\displaystyle \alpha _{t}=1} is optimal. When the problem is stochastic, the algorithm converges under some technical conditions on the learning rate that require it to decrease to zero. In practice, often a constant learning rate is used, such as α t = 0.1 {\displaystyle \alpha _{t}=0.1} for all t {\displaystyle t} . === Discount factor === The discount factor ⁠ γ {\displaystyle \gamma } ⁠ determines the importance of future rewards. A factor of 0 will make the agent "myopic" (or short-sighted) by only considering current rewards, i.e. r t {\displaystyle r_{t}} (in the update rule above), while a factor approaching 1 will make it strive for a long-term high reward. If the discount factor meets or exceeds 1, the action values may diverge. For ⁠ γ = 1 {\displaystyle \gamma =1} ⁠, without a terminal state, or if the agent never reaches one, all environment histories become infinitely long, and utilities with additive, undiscounted rewards generally become infinite. Even with a discount factor only slightly lower than 1, Q-function learning leads to propagation of errors and instabilities when the value function is approximated with an artificial neural network. In that case, starting with a lower discount factor and increasing it towards its final value accelerates learning. === Initial conditions (Q0) === Since Q-learning is an iterative algorithm, it implicitly assumes an initial condition before the first update occurs. High initial values, also known as "optimistic initial conditions", can encourage exploration: no matter what action is selected, the update rule will cause it to have lower values than the other alternative, thus increasing their choice probability. The first reward r {\displaystyle r} can be used to reset the initial conditions. According to this idea, the first time an action is taken the reward is used to set the value

    Read more →
  • L-1 Identity Solutions

    L-1 Identity Solutions

    L-1 Identity Solutions, Inc. was an American biometric technology company headquartered in Stamford, Connecticut, specializing in identity management products and services including facial recognition systems, fingerprint readers, and secure credentialing solutions for governments and commercial enterprises. The company's shares traded on the New York Stock Exchange under the ticker symbol "ID." == History == L-1 Identity Solutions was formed on August 29, 2006, from a merger of Viisage Technology, Inc. and Identix Incorporated. Prior to the Safran acquisition, L-1 divested its Intelligence Services Group (ISG) comprising SpecTal LLC, Advanced Concepts Inc., and McClendon LLC to BAE Systems, Inc. for approximately $297 million. The transaction, initially announced in September 2010, closed on February 15, 2011, with more than 1,000 ISG employees joining BAE Systems' Intelligence & Security sector. It specializes in selling face recognition systems, electronic passports, such as Fly Clear, and other biometric technology to governments such as the United States and Saudi Arabia. It also licenses technology to other companies internationally, including China. On July 26, 2011, Safran (NYSE Euronext Paris: SAF) acquired L-1 Identity Solutions, Inc. for a total cash amount of USD 1.09 billion. L-1 was part of Morpho's MorphoTrust department which rebranded to Idemia in 2017. Bioscrypt is a biometrics research, development and manufacturing company purchased by L-1 Identity Solutions. It provides fingerprint IP readers for physical access control systems, Facial recognition system readers for contactless access control authentication and OEM fingerprint modules for embedded applications. According to IMS Research, Bioscrypt has been the world market leader in biometric access control for enterprises (since 2006) with a worldwide market share of over 13%. In 2011, Bioscrypt was sold to Safran Morpho.

    Read more →
  • Kernel-phase

    Kernel-phase

    Kernel-phases are observable quantities used in high resolution astronomical imaging used for superresolution image creation. It can be seen as a generalization of closure phases for redundant arrays. For this reason, when the wavefront quality requirement are met, it is an alternative to aperture masking interferometry that can be executed without a mask while retaining phase error rejection properties. The observables are computed through linear algebra from the Fourier transform of direct images. They can then be used for statistical testing, model fitting, or image reconstruction. == Prerequisites == In order to extract kernel-phases from an image, some requirements must be met: Images are nyquist-sampled (at least 2 pixels per resolution element ( λ D {\displaystyle {\frac {\lambda }{D}}} )) Images are taken in near monochromatic light Exposure time is shorter than the timescale of aberrations Strehl ratio is high (good adaptive optics) Linearity of the pixel response (i.e. no saturation) Deviations from these requirements are known to be acceptable, but lead to observational bias that should be corrected by the observation of calibrators. == Definition == The method relies on a discrete model of the instrument's pupil plane and the corresponding list of baselines to provide corresponding vectors φ {\displaystyle \varphi } of pupil plane errors and Φ {\displaystyle \Phi } of image plane Fourier Phases. When the wavefront error in the pupil plane is small enough (i.e. when the Strehl ratio of the imaging system is sufficiently high), the complex amplitude associated to the instrumental phase in one point of the pupil φ k {\displaystyle \varphi _{k}} , can be approximated by e i φ k ≈ 1 + i φ k {\displaystyle e^{i\varphi _{k}}\approx 1+{\mathit {i}}\varphi _{k}} . This permits the expression of the pupil-plane phase aberrations φ {\displaystyle \varphi } to the image plane Fourier phase as a linear transformation described by the matrix A {\displaystyle A} : Φ = Φ 0 + A ⋅ φ {\displaystyle \Phi =\Phi _{0}+A\cdot \varphi } Where Φ 0 {\displaystyle \Phi _{0}} is the theoretical Fourier phase vector of the object. In this formalism, singular value decomposition can be used to find a matrix K {\displaystyle K} satisfying K ⋅ A = 0 {\displaystyle K\cdot A=0} . The rows of K {\displaystyle K} constitute a basis of the kernel of A T {\displaystyle A^{T}} . K ⋅ Φ = K ⋅ Φ 0 + K ⋅ A ⋅ φ {\displaystyle K\cdot \Phi =K\cdot \Phi _{0}+{\cancel {K\cdot A\cdot \varphi }}} The vector K . Φ {\displaystyle K.\Phi } is called the kernel-phase vector of observables. This equation can be used for model-fitting as it represents the interpretation of a sub-space of the Fourier phase that is immune to the instrumental phase errors to the first order. == Applications == The technique was first used in the re-analysis of archival images from the Hubble Space Telescope where it enabled the discovery of a number of brown dwarf in close binary systems. The technique is used as an alternative to aperture masking interferometry, especially for fainter stars because it does not require the use of masks that typically block 90% of the light, and therefore allows higher throughput. It is also considered to be an alternative to coronagraphy for direct detection of exoplanets at very small separations (below 2 λ D {\displaystyle 2{\frac {\lambda }{D}}} ) where coronagraphs are limited by the wavefront errors of adaptive optics. The same framework can be used for wavefront sensing. In the case of an asymmetric aperture, a pseudo-inverse of A {\displaystyle A} can be used to reconstruct the wavefront errors directly from the image. A Python library called xara is available on GitHub and maintained by Frantz Martinache to facilitate the extraction and interpretation of kernel-phases. The KERNEL project, has received funding from the European Research Council to explore the potential of these observables for a number of use-cases, including direct detection of exoplanets, image reconstruction, and image plane wavefront sensing for adaptive optics.

    Read more →
  • Constellation model

    Constellation model

    The constellation model is a probabilistic, generative model for category-level object recognition in computer vision. Like other part-based models, the constellation model attempts to represent an object class by a set of N parts under mutual geometric constraints. Because it considers the geometric relationship between different parts, the constellation model differs significantly from appearance-only, or "bag-of-words" representation models, which explicitly disregard the location of image features. The problem of defining a generative model for object recognition is difficult. The task becomes significantly complicated by factors such as background clutter, occlusion, and variations in viewpoint, illumination, and scale. Ideally, we would like the particular representation we choose to be robust to as many of these factors as possible. In category-level recognition, the problem is even more challenging because of the fundamental problem of intra-class variation. Even if two objects belong to the same visual category, their appearances may be significantly different. However, for structured objects such as cars, bicycles, and people, separate instances of objects from the same category are subject to similar geometric constraints. For this reason, particular parts of an object such as the headlights or tires of a car still have consistent appearances and relative positions. The Constellation Model takes advantage of this fact by explicitly modeling the relative location, relative scale, and appearance of these parts for a particular object category. Model parameters are estimated using an unsupervised learning algorithm, meaning that the visual concept of an object class can be extracted from an unlabeled set of training images, even if that set contains "junk" images or instances of objects from multiple categories. It can also account for the absence of model parts due to appearance variability, occlusion, clutter, or detector error. == History == The idea for a "parts and structure" model was originally introduced by Fischler and Elschlager in 1973. This model has since been built upon and extended in many directions. The Constellation Model, as introduced by Dr. Perona and his colleagues, was a probabilistic adaptation of this approach. In the late '90s, Burl et al. revisited the Fischler and Elschlager model for the purpose of face recognition. In their work, Burl et al. used manual selection of constellation parts in training images to construct a statistical model for a set of detectors and the relative locations at which they should be applied. In 2000, Weber et al. made the significant step of training the model using a more unsupervised learning process, which precluded the necessity for tedious hand-labeling of parts. Their algorithm was particularly remarkable because it performed well even on cluttered and occluded image data. Fergus et al. then improved upon this model by making the learning step fully unsupervised, having both shape and appearance learned simultaneously, and accounting explicitly for the relative scale of parts. == The method of Weber and Welling et al. == In the first step, a standard interest point detection method, such as Harris corner detection, is used to generate interest points. Image features generated from the vicinity of these points are then clustered using k-means or another appropriate algorithm. In this process of vector quantization, one can think of the centroids of these clusters as being representative of the appearance of distinctive object parts. Appropriate feature detectors are then trained using these clusters, which can be used to obtain a set of candidate parts from images. As a result of this process, each image can now be represented as a set of parts. Each part has a type, corresponding to one of the aforementioned appearance clusters, as well as a location in the image space. === Basic generative model === Weber & Welling here introduce the concept of foreground and background. Foreground parts correspond to an instance of a target object class, whereas background parts correspond to background clutter or false detections. Let T be the number of different types of parts. The positions of all parts extracted from an image can then be represented in the following "matrix," X o = ( x 11 , x 12 , ⋯ , x 1 N 1 x 21 , x 22 , ⋯ , x 2 N 2 ⋮ x T 1 , x T 2 , ⋯ , x T N T ) {\displaystyle X^{o}={\begin{pmatrix}x_{11},x_{12},{\cdots },x_{1N_{1}}\\x_{21},x_{22},{\cdots },x_{2N_{2}}\\\vdots \\x_{T1},x_{T2},{\cdots },x_{TN_{T}}\end{pmatrix}}} where N i {\displaystyle N_{i}\,} represents the number of parts of type i ∈ { 1 , … , T } {\displaystyle i\in \{1,\dots ,T\}} observed in the image. The superscript o indicates that these positions are observable, as opposed to missing. The positions of unobserved object parts can be represented by the vector x m {\displaystyle x^{m}\,} . Suppose that the object will be composed of F {\displaystyle F\,} distinct foreground parts. For notational simplicity, we assume here that F = T {\displaystyle F=T\,} , though the model can be generalized to F > T {\displaystyle F>T\,} . A hypothesis h {\displaystyle h\,} is then defined as a set of indices, with h i = j {\displaystyle h_{i}=j\,} , indicating that point x i j {\displaystyle x_{ij}\,} is a foreground point in X o {\displaystyle X^{o}\,} . The generative probabilistic model is defined through the joint probability density p ( X o , x m , h ) {\displaystyle p(X^{o},x^{m},h)\,} . === Model details === The rest of this section summarizes the details of Weber & Welling's model for a single component model. The formulas for multiple component models are extensions of those described here. To parametrize the joint probability density, Weber & Welling introduce the auxiliary variables b {\displaystyle b\,} and n {\displaystyle n\,} , where b {\displaystyle b\,} is a binary vector encoding the presence/absence of parts in detection ( b i = 1 {\displaystyle b_{i}=1\,} if h i > 0 {\displaystyle h_{i}>0\,} , otherwise b i = 0 {\displaystyle b_{i}=0\,} ), and n {\displaystyle n\,} is a vector where n i {\displaystyle n_{i}\,} denotes the number of background candidates included in the i t h {\displaystyle i^{th}} row of X o {\displaystyle X^{o}\,} . Since b {\displaystyle b\,} and n {\displaystyle n\,} are completely determined by h {\displaystyle h\,} and the size of X o {\displaystyle X^{o}\,} , we have p ( X o , x m , h ) = p ( X o , x m , h , n , b ) {\displaystyle p(X^{o},x^{m},h)=p(X^{o},x^{m},h,n,b)\,} . By decomposition, p ( X o , x m , h , n , b ) = p ( X o , x m | h , n , b ) p ( h | n , b ) p ( n ) p ( b ) {\displaystyle p(X^{o},x^{m},h,n,b)=p(X^{o},x^{m}|h,n,b)p(h|n,b)p(n)p(b)\,} The probability density over the number of background detections can be modeled by a Poisson distribution, p ( n ) = ∏ i = 1 T 1 n i ! ( M i ) n i e − M i {\displaystyle p(n)=\prod _{i=1}^{T}{\frac {1}{n_{i}!}}(M_{i})^{n_{i}}e^{-M_{i}}} where M i {\displaystyle M_{i}\,} is the average number of background detections of type i {\displaystyle i\,} per image. Depending on the number of parts F {\displaystyle F\,} , the probability p ( b ) {\displaystyle p(b)\,} can be modeled either as an explicit table of length 2 F {\displaystyle 2^{F}\,} , or, if F {\displaystyle F\,} is large, as F {\displaystyle F\,} independent probabilities, each governing the presence of an individual part. The density p ( h | n , b ) {\displaystyle p(h|n,b)\,} is modeled by p ( h | n , b ) = { 1 ∏ f = 1 F N f b f , if h ∈ H ( b , n ) 0 , for other h {\displaystyle p(h|n,b)={\begin{cases}{\frac {1}{\textstyle \prod _{f=1}^{F}N_{f}^{b_{f}}}},&{\mbox{if }}h\in H(b,n)\\0,&{\mbox{for other }}h\end{cases}}} where H ( b , n ) {\displaystyle H(b,n)\,} denotes the set of all hypotheses consistent with b {\displaystyle b\,} and n {\displaystyle n\,} , and N f {\displaystyle N_{f}\,} denotes the total number of detections of parts of type f {\displaystyle f\,} . This expresses the fact that all consistent hypotheses, of which there are ∏ f = 1 F N f b f {\displaystyle \textstyle \prod _{f=1}^{F}N_{f}^{b_{f}}} , are equally likely in the absence of information on part locations. And finally, p ( X o , x m | h , n ) = p f g ( z ) p b g ( x b g ) {\displaystyle p(X^{o},x^{m}|h,n)=p_{fg}(z)p_{bg}(x_{bg})\,} where z = ( x o x m ) {\displaystyle z=(x^{o}x^{m})\,} are the coordinates of all foreground detections, observed and missing, and x b g {\displaystyle x_{bg}\,} represents the coordinates of the background detections. Note that foreground detections are assumed to be independent of the background. p f g ( z ) {\displaystyle p_{fg}(z)\,} is modeled as a joint Gaussian with mean μ {\displaystyle \mu \,} and covariance Σ {\displaystyle \Sigma \,} . === Classification === The ultimate objective of this model is to classify images into classes "object present" (class C 1 {\displaystyle C_{1}\,} ) and "object absent" (class C 0 {\displaystyle C_{0}\,} ) given t

    Read more →
  • XGBoost

    XGBoost

    XGBoost (eXtreme Gradient Boosting) is an open-source software library which provides a regularizing gradient boosting framework for C++, Java, Python, R, Julia, Perl, and Scala. It works on Linux, Microsoft Windows, and macOS. From the project description, it aims to provide a "Scalable, Portable and Distributed Gradient Boosting (GBM, GBRT, GBDT) Library". It runs on a single machine, as well as the distributed processing frameworks Apache Hadoop, Apache Spark, Apache Flink, and Dask. XGBoost gained much popularity and attention in the mid-2010s as the algorithm of choice for many winning teams of machine learning competitions. == History == XGBoost initially started as a research project by Tianqi Chen as part of the Distributed (Deep) Machine Learning Community (DMLC) group at the University of Washington. Initially, it began as a terminal application which could be configured using a libsvm configuration file. It became well known in the ML competition circles after its use in the winning solution of the Higgs Machine Learning Challenge. Soon after, the Python and R packages were built, and XGBoost now has package implementations for Java, Scala, Julia, Perl, and other languages. This brought the library to more developers and contributed to its popularity among the Kaggle community, where it has been used for a large number of competitions. It was soon integrated with a number of other packages making it easier to use in their respective communities. It has now been integrated with scikit-learn for Python users and with the caret package for R users. It can also be integrated into Data Flow frameworks like Apache Spark, Apache Hadoop, and Apache Flink using the abstracted Rabit and XGBoost4J. XGBoost is also available on OpenCL for FPGAs. An efficient, scalable implementation of XGBoost has been published by Tianqi Chen and Carlos Guestrin. While the XGBoost model often achieves higher accuracy than a single decision tree, it sacrifices the intrinsic interpretability of decision trees. For example, following the path that a decision tree takes to make its decision is trivial and self-explained, but following the paths of hundreds or thousands of trees is much harder. == Features == Salient features of XGBoost which make it different from other gradient boosting algorithms include: Clever penalization of trees A proportional shrinking of leaf nodes Newton Boosting Extra randomization parameter Implementation on single, distributed systems and out-of-core computation Automatic feature selection Theoretically justified weighted quantile sketching for efficient computation Parallel tree structure boosting with sparsity Efficient cacheable block structure for decision tree training == The algorithm == XGBoost works as Newton–Raphson in function space unlike gradient boosting that works as gradient descent in function space, a second order Taylor approximation is used in the loss function to make the connection to Newton–Raphson method. A generic unregularized XGBoost algorithm is: == Parameters == XGBoost has parameters which can be specified to affect how it functions and performs. Some parameters include: Learning rate (also known as the "step size" or “"shrinkage"), it is a number between 0 and 1 (default is 0.3), which determines the rate the algorithm learns from each iteration. n_estimators, sets the number of trees to be built in the ensemble, where more trees generally increases the complexity of the model, but can lead to overfitting with too many trees. Gamma (also known as Lagrange multiplier or the minimum loss reduction parameter), controls the minimum amount of loss reduction required to make a further split on a leaf node of the tree. The default in XGBoost is 0 . max_depth, represents how deeply each tree in the boosting process can grow during training, where the default is 6. == Awards == John Chambers Award (2016) High Energy Physics meets Machine Learning award (HEP meets ML) (2016)

    Read more →