AI Detector Free Online

AI Detector Free Online — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Supersampling

  Supersampling or supersampling anti-aliasing (SSAA) is a spatial anti-aliasing method, i.e. a method used to remove aliasing (jagged and pixelated edges, colloquially known as "jaggies") from images rendered in computer games or other computer programs that generate imagery. Aliasing occurs because unlike real-world objects, which have continuous smooth curves and lines, a computer screen shows the viewer a large number of small squares. These pixels all have the same size, and each one has a single color. A line can only be shown as a collection of pixels, and therefore appears jagged unless it is perfectly horizontal or vertical. The aim of supersampling is to reduce this effect. Color samples are taken at several instances inside the pixel (not just at the center as normal)—hence the term "supersampling"—and an average color value is calculated. This can for example be achieved by rendering the image at a much higher resolution than the one being displayed, then shrinking it to the desired size, using the extra pixels for calculation, with the result being a downsampled image with smoother transitions from one line of pixels to another along the edges of objects, but each pixel could also be supersampled using other strategies (see the Supersampling patterns section). The number of samples determines the quality of the output. == Motivation == Aliasing is manifested in the case of 2D images as moiré pattern and pixelated edges, colloquially known as "jaggies". Common signal processing and image processing knowledge suggests that to achieve perfect elimination of aliasing, proper spatial sampling at the Nyquist rate (or higher) after applying a 2D Anti-aliasing filter is required. As this approach would require a forward and inverse fourier transformation, computationally less demanding approximations like supersampling were developed to avoid domain switches by staying in the spatial domain ("image domain"). == Method == === Computational cost and adaptive supersampling === Supersampling is computationally expensive because it requires much greater video card memory and memory bandwidth, since the amount of buffer used is several times larger. A way around this problem is to use a technique known as adaptive supersampling, where only pixels at the edges of objects are supersampled. Initially only a few samples are taken within each pixel. If these values are very similar, only these samples are used to determine the color. If not, more are used. The result of this method is that a higher number of samples are calculated only where necessary, thus improving performance. === Supersampling patterns === When taking samples within a pixel, the sample positions have to be determined in some way. Although the number of ways in which this can be done is infinite, there are a few ways which are commonly used. ==== Grid ==== The simplest algorithm. The pixel is split into several sub-pixels, and a sample is taken from the center of each. It is fast and easy to implement. Although, due to the regular nature of sampling, aliasing can still occur if a low number of sub-pixels is used. ==== Random ==== Also known as stochastic sampling, it avoids the regularity of grid supersampling. However, due to the irregularity of the pattern, samples end up being unnecessary in some areas of the pixel and lacking in others. ==== Poisson disk ==== The Poisson disk sampling algorithm places the samples randomly, but then checks that any two are not too close. The end result is an even but random distribution of samples. The naive "dart throwing" algorithm is extremely slow for large data sets, which once limited its applications for real-time rendering. However, many fast algorithms now exist to generate Poisson disk noise, even those with variable density. The Delone set provides a mathematical description of such sampling. ==== Jittered ==== A modification of the grid algorithm to approximate the Poisson disk. A pixel is split into several sub-pixels, but a sample is not taken from the center of each, but from a random point within the sub-pixel. Congregation can still occur, but to a lesser degree. ==== Rotated grid ==== A 2×2 grid layout is used but the sample pattern is rotated to avoid samples aligning on the horizontal or vertical axis, greatly improving antialiasing quality for the most commonly encountered cases. For an optimal pattern, the rotation angle is arctan (⁠1/2⁠) (about 26.6°) and the square is stretched by a factor of ⁠√5/2⁠, making it also a 4-queens solution.

  Read more →
• 

  Co-Büchi automaton

  In automata theory, a co-Büchi automaton is a variant of Büchi automaton. The only difference is the accepting condition: a Co-Büchi automaton accepts an infinite word w {\displaystyle w} if there exists a run, such that all the states occurring infinitely often in the run are in the final state set F {\displaystyle F} . In contrast, a Büchi automaton accepts a word w {\displaystyle w} if there exists a run, such that at least one state occurring infinitely often in the final state set F {\displaystyle F} . (Deterministic) Co-Büchi automata are strictly weaker than (nondeterministic) Büchi automata. == Formal definition == Formally, a deterministic co-Büchi automaton is a tuple A = ( Q , Σ , δ , q 0 , F ) {\displaystyle {\mathcal {A}}=(Q,\Sigma ,\delta ,q_{0},F)} that consists of the following components: Q {\displaystyle Q} is a finite set. The elements of Q {\displaystyle Q} are called the states of A {\displaystyle {\mathcal {A}}} . Σ {\displaystyle \Sigma } is a finite set called the alphabet of A {\displaystyle {\mathcal {A}}} . δ : Q × Σ → Q {\displaystyle \delta :Q\times \Sigma \rightarrow Q} is the transition function of A {\displaystyle {\mathcal {A}}} . q 0 {\displaystyle q_{0}} is an element of Q {\displaystyle Q} , called the initial state. F ⊆ Q {\displaystyle F\subseteq Q} is the final state set. A {\displaystyle {\mathcal {A}}} accepts exactly those words w {\displaystyle w} with the run ρ ( w ) {\displaystyle \rho (w)} , in which all of the infinitely often occurring states in ρ ( w ) {\displaystyle \rho (w)} are in F {\displaystyle F} . In a non-deterministic co-Büchi automaton, the transition function δ {\displaystyle \delta } is replaced with a transition relation Δ {\displaystyle \Delta } . The initial state q 0 {\displaystyle q_{0}} is replaced with an initial state set Q 0 {\displaystyle Q_{0}} . Generally, the term co-Büchi automaton refers to the non-deterministic co-Büchi automaton. For more comprehensive formalism see also ω-automaton. == Acceptance Condition == The acceptance condition of a co-Büchi automaton is formally ∃ i ∀ j : j ≥ i ρ ( w j ) ∈ F . {\displaystyle \exists i\forall j:\;j\geq i\quad \rho (w_{j})\in F.} The Büchi acceptance condition is the complement of the co-Büchi acceptance condition: ∀ i ∃ j : j ≥ i ρ ( w j ) ∈ F . {\displaystyle \forall i\exists j:\;j\geq i\quad \rho (w_{j})\in F.} == Properties == Co-Büchi automata are closed under union, intersection, projection and determinization.

  Read more →
• 

  AI Video Editors: Free vs Paid (2026)

  Trying to pick the best AI video editor? An AI video editor is software that uses machine learning to help you get more done — it scales effortlessly from a single task to thousands. The best picks balance beginner-friendly simplicity with the depth power users need, and they ship updates often. Whether you are a beginner or a pro, the right AI video editor slots into your workflow and pays for itself fast. This guide breaks down the top picks, their pros and cons, and who each one is best for.

  Read more →
• 

  Is an AI Humanizer Worth It in 2026?

  Shopping for the best AI humanizer? An AI humanizer is software that uses machine learning to help you get more done — it keeps getting smarter as the underlying models improve. Pricing, accuracy, and the size of the model behind the tool are the three factors that most affect daily usefulness. Whether you are a beginner or a pro, the right AI humanizer slots into your workflow and pays for itself fast. We tested the leading options and ranked them by quality, value, and ease of use.

  Read more →
• 

  Rendering equation

  In computer graphics, the rendering equation is an integral equation that expresses the amount of light leaving a point on a surface as the sum of emitted light and reflected light. It was independently introduced into computer graphics by David Immel et al. and James Kajiya in 1986. The equation is important in the theory of physically based rendering, describing the relationships between the bidirectional reflectance distribution function (BRDF) and the radiometric quantities used in rendering. The rendering equation is defined at every point on every surface in the scene being rendered, including points hidden from the camera. The incoming light quantities on the right side of the equation usually come from the left (outgoing) side at other points in the scene (ray casting can be used to find these other points). The radiosity rendering method solves a discrete approximation of this system of equations. In distributed ray tracing, the integral on the right side of the equation may be evaluated using Monte Carlo integration by randomly sampling possible incoming light directions. Path tracing improves and simplifies this method. The rendering equation can be extended to handle effects such as fluorescence (in which some absorbed energy is re-emitted at different wavelengths) and can support transparent and translucent materials by using a bidirectional scattering distribution function (BSDF) in place of a BRDF. The theory of path tracing sometimes uses a path integral (integral over possible paths from a light source to a point) instead of the integral over possible incoming directions. == Equation form == The rendering equation may be written in the form L o ( x , ω o , λ , t ) = L e ( x , ω o , λ , t ) + L r ( x , ω o , λ , t ) {\displaystyle L_{\text{o}}(\mathbf {x} ,\omega _{\text{o}},\lambda ,t)=L_{\text{e}}(\mathbf {x} ,\omega _{\text{o}},\lambda ,t)+L_{\text{r}}(\mathbf {x} ,\omega _{\text{o}},\lambda ,t)} L r ( x , ω o , λ , t ) = ∫ Ω f r ( x , ω i , ω o , λ , t ) L i ( x , ω i , λ , t ) ( ω i ⋅ n ) d ⁡ ω i {\displaystyle L_{\text{r}}(\mathbf {x} ,\omega _{\text{o}},\lambda ,t)=\int _{\Omega }f_{\text{r}}(\mathbf {x} ,\omega _{\text{i}},\omega _{\text{o}},\lambda ,t)L_{\text{i}}(\mathbf {x} ,\omega _{\text{i}},\lambda ,t)(\omega _{\text{i}}\cdot \mathbf {n} )\operatorname {d} \omega _{\text{i}}} where L o ( x , ω o , λ , t ) {\displaystyle L_{\text{o}}(\mathbf {x} ,\omega _{\text{o}},\lambda ,t)} is the total spectral radiance of wavelength λ {\displaystyle \lambda } directed outward along direction ω o {\displaystyle \omega _{\text{o}}} at time t {\displaystyle t} , from a particular position x {\displaystyle \mathbf {x} } x {\displaystyle \mathbf {x} } is the location in space ω o {\displaystyle \omega _{\text{o}}} is the direction of the outgoing light λ {\displaystyle \lambda } is a particular wavelength of light t {\displaystyle t} is time L e ( x , ω o , λ , t ) {\displaystyle L_{\text{e}}(\mathbf {x} ,\omega _{\text{o}},\lambda ,t)} is emitted spectral radiance L r ( x , ω o , λ , t ) {\displaystyle L_{\text{r}}(\mathbf {x} ,\omega _{\text{o}},\lambda ,t)} is reflected spectral radiance ∫ Ω … d ⁡ ω i {\displaystyle \int _{\Omega }\dots \operatorname {d} \omega _{\text{i}}} is an integral over Ω {\displaystyle \Omega } Ω {\displaystyle \Omega } is the unit hemisphere centered around n {\displaystyle \mathbf {n} } containing all possible values for ω i {\displaystyle \omega _{\text{i}}} where ω i ⋅ n > 0 {\displaystyle \omega _{\text{i}}\cdot \mathbf {n} >0} f r ( x , ω i , ω o , λ , t ) {\displaystyle f_{\text{r}}(\mathbf {x} ,\omega _{\text{i}},\omega _{\text{o}},\lambda ,t)} is the bidirectional reflectance distribution function, the proportion of light reflected from ω i {\displaystyle \omega _{\text{i}}} to ω o {\displaystyle \omega _{\text{o}}} at position x {\displaystyle \mathbf {x} } , time t {\displaystyle t} , and at wavelength λ {\displaystyle \lambda } ω i {\displaystyle \omega _{\text{i}}} is the negative direction of the incoming light L i ( x , ω i , λ , t ) {\displaystyle L_{\text{i}}(\mathbf {x} ,\omega _{\text{i}},\lambda ,t)} is spectral radiance of wavelength λ {\displaystyle \lambda } coming inward toward x {\displaystyle \mathbf {x} } from direction ω i {\displaystyle \omega _{\text{i}}} at time t {\displaystyle t} n {\displaystyle \mathbf {n} } is the surface normal at x {\displaystyle \mathbf {x} } ω i ⋅ n {\displaystyle \omega _{\text{i}}\cdot \mathbf {n} } is the weakening factor of outward irradiance due to incident angle, as the light flux is smeared across a surface whose area is larger than the projected area perpendicular to the ray. This is often written as cos ⁡ θ i {\displaystyle \cos \theta _{i}} . Two noteworthy features are: its linearity—it is composed only of multiplications and additions, and its spatial homogeneity—it is the same in all positions and orientations. These mean a wide range of factorings and rearrangements of the equation are possible. It is a Fredholm integral equation of the second kind, similar to those that arise in quantum field theory. Note this equation's spectral and time dependence — L o {\displaystyle L_{\text{o}}} may be sampled at or integrated over sections of the visible spectrum to obtain, for example, a trichromatic color sample. A pixel value for a single frame in an animation may be obtained by fixing t ; {\displaystyle t;} motion blur can be produced by averaging L o {\displaystyle L_{\text{o}}} over some given time interval (by integrating over the time interval and dividing by the length of the interval). Note that a solution to the rendering equation is the function L o {\displaystyle L_{\text{o}}} . The function L i {\displaystyle L_{\text{i}}} is related to L o {\displaystyle L_{\text{o}}} via a ray-tracing operation: The incoming radiance from some direction at one point is the outgoing radiance at some other point in the opposite direction. == Applications == Solving the rendering equation for any given scene is the primary challenge in realistic rendering. One approach to solving the equation is based on finite element methods, leading to the radiosity algorithm. Another approach using Monte Carlo methods has led to many different algorithms including path tracing, photon mapping, and Metropolis light transport, among others. == Limitations == Although the equation is very general, it does not capture every aspect of light reflection. Some missing aspects include the following: Transmission, which occurs when light is transmitted through the surface, such as when it hits a glass object or a water surface, Subsurface scattering, where the spatial locations for incoming and departing light are different. Surfaces rendered without accounting for subsurface scattering may appear unnaturally opaque — however, it is not necessary to account for this if transmission is included in the equation, since that will effectively include also light scattered under the surface, Polarization, where different light polarizations will sometimes have different reflection distributions, for example when light bounces at a water surface, Phosphorescence, which occurs when light or other electromagnetic radiation is absorbed at one moment and emitted at a later moment, usually with a longer wavelength (unless the absorbed electromagnetic radiation is very intense), Interference, where the wave properties of light are exhibited, Fluorescence, where the absorbed and emitted light have different wavelengths, Non-linear effects, where very intense light can increase the energy level of an electron with more energy than that of a single photon (this can occur if the electron is hit by two photons at the same time), and emission of light with higher frequency than the frequency of the light that hit the surface suddenly becomes possible, and Doppler effect, where light that bounces off an object moving at a very high speed will get its wavelength changed: if the light bounces off an object that is moving towards it, the light will be blueshifted and the photons will be packed more closely so the photon flux will be increased; if it bounces off an object moving away from it, it will be redshifted and the photon flux will be decreased. This effect becomes apparent only at speeds comparable to the speed of light, which is not the case for most rendering applications. For scenes that are either not composed of simple surfaces in a vacuum or for which the travel time for light is an important factor, researchers have generalized the rendering equation to produce a volume rendering equation suitable for volume rendering and a transient rendering equation for use with data from a time-of-flight camera.

  Read more →
• 

  Ashutosh Saxena

  Ashutosh Saxena is an Indian-American computer scientist, researcher, and entrepreneur known for his contributions to the field of artificial intelligence and large-scale robot learning. His interests include building enterprise AI agents and embodied AI. Saxena is the co-founder and CEO of Caspar.AI, where generative AI parses data from ambient 3D radar sensors to predict 20+ health & wellness markers for pro-active patient care. Prior to Caspar.AI, Ashutosh co-founded Cognical Katapult (NSDQ: KPLT), which provides a no credit required alternative to traditional financing for online and omni-channel retail. Before Katapult, Saxena was an assistant professor in the Computer Science Department and faculty director of the RoboBrain Project (a large-scale AI model for robotics) at Cornell University. == Education == In 2009, with artificial intelligence pioneer Andrew Ng as his advisor, Saxena received both his M.S. and Ph.D. in computer science with an emphasis on artificial intelligence from Stanford University. Saxena received his bachelor's degree in electrical engineering from the Indian Institute of Technology, Kanpur in 2004. == Career == Saxena was the chief scientist of New York-based Holopad, where he worked with Steven Spielberg's team to create walkthroughs and 3D experiences for his movie TinTin. His past experiences include building acoustic AI models at Bose Corporation. Once Ashutosh completed his undergraduate degree, he became a researcher at the Commonwealth Scientific and Industrial Research Organization, where he developed AI models for medical devices. Before Caspar, Saxena pursued other entrepreneurial ventures, such as ZunaVision, an artificial intelligence startup he co-founded with Andrew Ng that uses AI to embed advertising space within videos. Ashutosh served as the CTO of ZunaVision from 2008 to 2010. After ZunaVision, Saxena co-founded Cognical Katapult, which provided financing solutions to nonprime and underbanked consumers powered by artificial intelligence. From 2014 to 2016, Saxena served as the faculty director of the RoboBrain project, which was a joint venture that he started between Stanford University, Cornell University, Brown University, and the University of California, Berkeley that made a knowledge engine for robots. Saxena co-founded Brain of Things in 2015 with David Cheriton, who serves as chief scientist, and was listed as the fastest growing private company reaching an annual recurring revenue of $8 million in three years. It has been widely covered in several outlets including Forbes Japan, and MIT Technology Review. Saxena's work on deep learning won test of time award in 2023 by Robotics Science and Systems. Ashutosh has been recognized for his work by receiving the Alfred P. Sloan Fellow in 2011, Google Faculty Research Award in 2012, Microsoft Faculty Fellowship in 2012, NSF Career award in 2013, One of the Eight Innovators to Watch by the Smithsonian Institution in 2015, and received TR35 Innovator Award by MIT Technology Review in 2018. He was named by San Francisco Business Times as a 40 under 40 young business leader. == Research == Saxena has authored over 100 published papers in the areas of large-scale robot learning and artificial intelligence, with 20,000+ citations. His work in the fields of computer vision and deep learning have been featured in press releases and academic journal reviews. Ashutosh's early work includes the Stanford Artificial Intelligence Robot (STAIR), an AI models that enables to perform tasks such as unload items from a dishwasher, which was covered on the front-page of New York Times. His work on Make3D, was the first work that estimated 3D depth from a single still image. At Cornell University, Ashutosh led the Robot Learning Lab, which used a machine learning approach to train robots to perform tasks in human environments such as generalizing manipulation in 3D point-clouds where robots learn to transfer manipulation trajectories to novel objects utilizing a large sample of demonstrations from crowdsourcing.

  Read more →
• 

  The Best Free AI Content Generator for Beginners

  Looking for the best AI content generator? An AI content generator is software that uses machine learning to help you get more done — it can save you hours every week by automating repetitive work. Most options offer a generous free tier, with paid plans unlocking higher limits, faster processing, and team features. Whether you are a beginner or a pro, the right AI content generator slots into your workflow and pays for itself fast. This guide breaks down the top picks, their pros and cons, and who each one is best for.

  Read more →
• 

  Aslı Çelikyılmaz

  Aslı Çelikyılmaz is an engineer specializing in natural language processing, and particularly in natural language generation for software agents with advanced reasoning and real-world modeling capabilities. Educated in Turkey and Canada, she works in the US as senior research lead at Fundamentals AI Research, Meta. She also holds an affiliate faculty position in computer science at the University of Washington, and is co-editor-in-chief of the journal Transactions of the Association for Computational Linguistics. == Education and career == Çelikyılmaz is a 1997 graduate of Istanbul Technical University, where she studied industrial engineering. After a 2002 master's degree in computer and information science from Seneca Polytechnic in Toronto, and a second master's degree in information science from the University of Toronto in 2005, she completed a Ph.D. in information science at the University of Toronto in 2008. She worked as a postdoctoral researcher in California, at the University of California, Berkeley, from 2008 to 2010. In 2010 she joined Microsoft in Sunnyvale, California, where she became a senior scientist and later a senior principal researcher in Redmond, Washington. She added her affiliation with the University of Washington in 2018, and moved to Meta in Seattle in 2021. == Recognition == Çelikyılmaz was named to the 2026 class of IEEE Fellows, "for contributions to conversational systems and language generation".

  Read more →
• 

  Automated essay scoring

  Automated essay scoring (AES) is the use of specialized computer programs to assign grades to essays written in an educational setting. It is a form of educational assessment and an application of natural language processing. Its objective is to classify a large set of textual entities into a small number of discrete categories, corresponding to the possible grades, for example, the numbers 1 to 6. Therefore, it can be considered a problem of statistical classification. Several factors have contributed to a growing interest in AES. Among them are cost, accountability, standards, and technology. Rising education costs have led to pressure to hold the educational system accountable for results by imposing standards. The advance of information technology promises to measure educational achievement at reduced cost. The use of AES for high-stakes testing in education has generated significant backlash, with opponents pointing to research that computers cannot yet grade writing accurately and arguing that their use for such purposes promotes teaching writing in reductive ways (i.e. teaching to the test). == History == Most historical summaries of AES trace the origins of the field to the work of Ellis Batten Page. In 1966, he argued for the possibility of scoring essays by computer, and in 1968 he published his successful work with a program called Project Essay Grade (PEG). Using the technology of that time, computerized essay scoring would not have been cost-effective, so Page abated his efforts for about two decades. Eventually, Page sold PEG to Measurement Incorporated. By 1990, desktop computers had become so powerful and so widespread that AES was a practical possibility. As early as 1982, a UNIX program called Writer's Workbench was able to offer punctuation, spelling and grammar advice. In collaboration with several companies (notably Educational Testing Service), Page updated PEG and ran some successful trials in the early 1990s. Peter Foltz and Thomas Landauer developed a system using a scoring engine called the Intelligent Essay Assessor (IEA). IEA was first used to score essays in 1997 for their undergraduate courses. It is now a product from Pearson Educational Technologies and used for scoring within a number of commercial products and state and national exams. IntelliMetric is Vantage Learning's AES engine. Its development began in 1996. It was first used commercially to score essays in 1998. Educational Testing Service offers "e-rater", an automated essay scoring program. It was first used commercially in February 1999. Jill Burstein was the team leader in its development. ETS's Criterion Online Writing Evaluation Service uses the e-rater engine to provide both scores and targeted feedback. Lawrence Rudner has done some work with Bayesian scoring, and developed a system called BETSY (Bayesian Essay Test Scoring sYstem). Some of his results have been published in print or online, but no commercial system incorporates BETSY as yet. Under the leadership of Howard Mitzel and Sue Lottridge, Pacific Metrics developed a constructed response automated scoring engine, CRASE. Currently utilized by several state departments of education and in a U.S. Department of Education-funded Enhanced Assessment Grant, Pacific Metrics’ technology has been used in large-scale formative and summative assessment environments since 2007. Measurement Inc. acquired the rights to PEG in 2002 and has continued to develop it. In 2012, the Hewlett Foundation sponsored a competition on Kaggle called the Automated Student Assessment Prize (ASAP). 201 challenge participants attempted to predict, using AES, the scores that human raters would give to thousands of essays written to eight different prompts. The intent was to demonstrate that AES can be as reliable as human raters, or more so. The competition also hosted a separate demonstration among nine AES vendors on a subset of the ASAP data. Although the investigators reported that the automated essay scoring was as reliable as human scoring, this claim was not substantiated by any statistical tests because some of the vendors required that no such tests be performed as a precondition for their participation. Moreover, the claim that the Hewlett Study demonstrated that AES can be as reliable as human raters has since been strongly contested, including by Randy E. Bennett, the Norman O. Frederiksen Chair in Assessment Innovation at the Educational Testing Service. Some of the major criticisms of the study have been that five of the eight datasets consisted of paragraphs rather than essays, four of the eight data sets were graded by human readers for content only rather than for writing ability, and that rather than measuring human readers and the AES machines against the "true score", the average of the two readers' scores, the study employed an artificial construct, the "resolved score", which in four datasets consisted of the higher of the two human scores if there was a disagreement. This last practice, in particular, gave the machines an unfair advantage by allowing them to round up for these datasets. In 1966, Page hypothesized that, in the future, the computer-based judge will be better correlated with each human judge than the other human judges are. Despite criticizing the applicability of this approach to essay marking in general, this hypothesis was supported for marking free text answers to short questions, such as those typical of the British GCSE system. Results of supervised learning demonstrate that the automatic systems perform well when marking by different human teachers is in good agreement. Unsupervised clustering of answers showed that excellent papers and weak papers formed well-defined clusters, and the automated marking rule for these clusters worked well, whereas marks given by human teachers for the third cluster ('mixed') can be controversial, and the reliability of any assessment of works from the 'mixed' cluster can often be questioned (both human and computer-based). == Different dimensions of essay quality == According to a recent survey, modern AES systems try to score different dimensions of an essay's quality in order to provide feedback to users. These dimensions include the following items: Grammaticality: following grammar rules Usage: using of prepositions, word usage Mechanics: following rules for spelling, punctuation, capitalization Style: word choice, sentence structure variety Relevance: how relevant of the content to the prompt Organization: how well the essay is structured Development: development of ideas with examples Cohesion: appropriate use of transition phrases Coherence: appropriate transitions between ideas Thesis Clarity: clarity of the thesis Persuasiveness: convincingness of the major argument == Procedure == From the beginning, the basic procedure for AES has been to start with a training set of essays that have been carefully hand-scored. The program evaluates surface features of the text of each essay, such as the total number of words, the number of subordinate clauses, or the ratio of uppercase to lowercase letters—quantities that can be measured without any human insight. It then constructs a mathematical model that relates these quantities to the scores that the essays received. The same model is then applied to calculate scores of new essays. Recently, one such mathematical model was created by Isaac Persing and Vincent Ng. which not only evaluates essays on the above features, but also on their argument strength. It evaluates various features of the essay, such as the agreement level of the author and reasons for the same, adherence to the prompt's topic, locations of argument components (major claim, claim, premise), errors in the arguments, cohesion in the arguments among various other features. In contrast to the other models mentioned above, this model is closer in duplicating human insight while grading essays. Due to the growing popularity of deep neural networks, deep learning approaches have been adopted for automated essay scoring, generally obtaining superior results, often surpassing inter-human agreement levels. The various AES programs differ in what specific surface features they measure, how many essays are required in the training set, and most significantly in the mathematical modeling technique. Early attempts used linear regression. Modern systems may use linear regression or other machine learning techniques often in combination with other statistical techniques such as latent semantic analysis and Bayesian inference. The automated essay scoring task has also been studied in the cross-domain setting using machine learning models, where the models are trained on essays written for one prompt (topic) and tested on essays written for another prompt. Successful approaches in the cross-domain scenario are based on deep neural networks or models that combine deep and shallow features. == Criteria for success == Any method of a

  Read more →
• 

  Is an AI Bug Finder Worth It in 2026?

  In search of the best AI bug finder? An AI bug finder is software that uses machine learning to help you get more done — it turns a rough idea into a polished result in seconds. When choosing one, weigh output quality, pricing, export formats, and how well it fits the tools you already use. Whether you are a beginner or a pro, the right AI bug finder slots into your workflow and pays for itself fast. Below we compare features, pricing, and real output so you can choose with confidence.

  Read more →
• 

  Ancient text corpora

  Ancient text corpora are the entire collection of texts from the period of ancient history, defined in this article as the period from the beginning of writing up to 300 AD. These corpora are important for the study of literature, history, linguistics, and other fields, and are a fundamental component of the world's cultural heritage. Chinese, Latin, and Greek are examples of ancient languages with significant text corpora, although much of these corpora are known to us via transmission (frequently via medieval manuscript copies) rather than in their original form. These texts – both transmitted and original – provide valuable insights into the history and culture of different regions of the world, and have been studied for centuries by scholars and researchers. Other ancient texts – particularly stone inscriptions and papyrus scrolls – have been published following archaeological research, notably the cuneiform corpus of c.10 million words and the c.5 million words in ancient Egyptian. Through advances in technology and digitization, ancient text corpora are more accessible than ever before. Tools such as the Perseus Digital Library and the Digital Corpus of Sanskrit have made it easier for researchers to access and analyze these texts. == Quantifying the corpora == Two types of ancient texts are known to modern scholars – those that have only survived in younger manuscripts, but whose great age is undisputed (this applies to the bulk of the Chinese, Brahmi, Greek, Latin, Hebrew and Avestan tradition), and those known from original inscriptions, papyri and other manuscripts. Counting of the words in each corpus presents significant methodological challenges – in principle, every single occurrence of a word in the text is counted separately, but in the case of parallel transmission of literary texts, only a single transmission is taken into account. Just as the Book of the Dead and the coffin texts are only included once in the number given for the Egyptian, the Greek and Latin literary works should only be counted according to one manuscript. If, on the other hand, tombs, royal inscriptions or economic documents of certain ancient languages often show a more or less identical form, this is not evaluated as a purely "parallel tradition". Attached prepositions are counted as separate words, except in the case of the definite article in Hebrew, Aramaic and Greek since it has no equivalent in most languages, so its frequency would significantly affect the comparability of numbers. === Languages with known size estimates === === South Asian === Sanskrit (Vedic Sanskrit and Classical Sanskrit) Indus script (3,800 items, c.20,000 characters) Brahmi script Old Tamil Early Indian epigraphy and Indian epic poetry Kharosthi Pali literature List of historic Indian texts === Mesoamerican === Olmec hieroglyphs Maya script === East Asian === Old Chinese Chinese classics The pre-Qin corpus: a collection of ancient Chinese texts written before the Qin dynasty (221 BCE). The corpus includes texts from Confucianism, Taoism, Legalism, and other schools of thought. The pre-Han corpus: a collection of ancient Chinese texts written before the Han dynasty (202 BCE). The corpus includes texts from Confucianism, Taoism, Legalism, and other schools of thought. See the Chinese Text Project Chinese bronze inscriptions, Oracle bone script, Seal script, Clerical script === Central Iranian languages === Prior to 300 AD, the Central Iranian languages are mainly in the form of Sassanid stone inscriptions in the two closely related idioms Middle Persian (Pahlavi scripts and Inscriptional Parthian), there are 5000 for the corpus of Middle Persian (mostly 3rd, but also 4th/5th centuries) and for the corpus of Parthian (3rd century) 3000 words. To what extent some of the Manichaean Middle Persian literary texts may date back to the 3rd century is difficult to estimate; Mani is said to have personally written the Shabuhragan totaling about 5000 words. In any case, if we combine Middle Persian and Parthian, we come to over 10,000 words. === Proto-Sinaitic === Proto-Sinaitic script has no more than about 400 letters (number of words is unknown since the script has not been fully interpreted). To a similar extent, there are probably approximately contemporaneous Proto-Canaanite inscriptions (ibid.). === Anatolian === Luwian cuneiform, approx. 3000 words the Palaic language few hundred words. Hieroglyphic Luwian the Lycian alphabet (the best attested Anatolian successor language written in alphabetic script) with about 5000 words The Lydian alphabet 109 inscriptions comprising about 1500 words The Phrygian alphabet the in-tomb inscriptions from the 2nd and 3rd centuries AD (approx. 1000 words) and in the so-called "old Phrygian" inscriptions less than 300 words The Carian alphabets whose texts, mainly from Egypt, contain around 600 words. === Old Italic === the Umbrian language attested essentially by the sacrificial instructions of the Iguvinian Tables with 5000 words the Oscan language (ibid.) with 2000 words the Messapic language with probably a good 1000 words (the estimate is difficult because most texts in this hardly understandable language do not use word separators) the Venetic language a few hundred words the Faliscan language a few hundred words Cisalpine Celtic inscriptions amount to approximately 2000 words, to which are added a number of glosses by classical authors === Iberia === Iberian scripts, more rarely written in Greek or Latin script, approx. 2500 words Celtiberian script, which refers to Celtic language testimonies in Iberian, but also in Latin script from Spain (approx. 1000 words) Southwest Paleohispanic script, 78 inscriptions, a few hundred words Lusitanian language, three monuments in Latin script, approx. 60 words === Germanic Northern Europe === Runic inscriptions dated before the 4th century amount to about 30 pieces, which contain no more than 50 words in total === Africa === Geʽez script: comparatively few inscriptions with a total of around 1,000 words before 300 AD. Following Christianization in the 4th century, more extensive texts are known. Libyco-Berber alphabet: over 1,000 inscriptions from the Maghreb, which are dated to Roman times. Most texts do not use a word separator; Peust estimates that the total number of words could be around 5,000 Meroitic script (Ancient Nubian): about 900 texts are known, which Peust estimates may contain approximately 10,000 words, albeit with uncertainty from the fact that the word separator is not used consistently in the Meroitic script. === Aegean === The Cretan Linear A inscriptions that have not yet been deciphered are available in about 2500 texts, which contain a total of around 20,000 characters. The total number of words can hardly be determined; Peust tentatively put it in the same order of magnitude as in Meroitic. In addition to the Linear A texts, there are also inscriptions Cretan hieroglyphs of a few hundred characters and texts written in the Greek alphabet, but not in Greek, with a few dozen words Cypriot syllabary in the first millennium BC, in which mostly Greek texts were recorded. The relevant texts comprise around 100 to 200 words. === Micro corpora === There are a significant number of ancient micro-corpus languages. Estimating the total number of attested ancient languages may be as difficult as estimating their corpus size. For example, Greek and Latin sources hand down an enormous amount of foreign-language glosses, the seriousness of which is not always certain. == Preservation and curation == Historic preservation and maintaining ancient text corpora presents several challenges, including issues with preservation, translation, and digitization. Many ancient texts have been lost over time, and those that survive may be damaged or fragmented. Translating ancient languages and scripts requires specialized expertise, and digitizing texts can be time-consuming and resource-intensive. == Corpus linguistics == The field of corpus linguistics studies language as expressed in text corpora. This includes the analysis of word frequency, collocations, grammar, and semantics. Ancient text corpora provide a valuable resource for corpus linguistics research, enabling scholars to explore the evolution of language and culture over time.

  Read more →
• 

  DeepL Translator

  DeepL is a German AI research company known for its language AI platform, which includes DeepL Translator and DeepL Voice, and for DeepL Agent, an AI agent capable of planning workflows and using office systems and tools autonomously, in response to natural language instructions. Its algorithm uses the transformer architecture. It offers a paid subscription for additional features and access to its translation application programming interface. DeepL was founded in 2017 by Jaroslaw Kutylowski and is a unicorn, valued at $2 billion after a Series C funding round raised $300 million in May 2024. Its more than 200,000 business customers include a large proportion of the Fortune 500. == History == The translating system was first developed within Linguee by a team led by Chief Technology Officer Jarosław Kutyłowski in 2016. It was launched as DeepL Translator on 28 August 2017 and offered translations between English, German, French, Spanish, Italian, Polish and Dutch. At its launch, it claimed to have surpassed its competitors in blind tests and BLEU scores, including Google Translate, Amazon Translate, Microsoft Translator and Facebook's translation feature. With the release of DeepL in 2017, Linguee's company name was changed to DeepL GmbH, and it is also financed by advertising on its sister site, linguee.com. Support for Portuguese and Russian was added on 5 December 2018. In July 2019, Jarosław Kutyłowski became the CEO of DeepL GmbH and restructured the company into a Societas Europaea in 2021. Translation software for Microsoft Windows and macOS was released in September 2019. Support for Chinese (simplified) and Japanese was added on 19 March 2020, which the company claimed to have surpassed the aforementioned competitors as well as Baidu and Youdao. Then, 13 more European languages were added in March 2021: Bulgarian, Czech, Danish, Estonian, Finnish, Greek, Hungarian, Latvian, Lithuanian, Romanian, Slovak, Slovenian, and Swedish, bringing the total number of supported languages to 24. On 25 May 2022, support for Indonesian and Turkish was added, and support for Ukrainian was added on 14 September 2022. In January 2023, the company reached a valuation of 1 billion euro and became the most valued startup company in Cologne. At the end of the month, support for Korean and Norwegian (Bokmål) was also added. In May 2024, the company announced an investment of US$300 million at AI. In January 2026, more languages were supported, including Luxembourgish and Irish. == Services == === Translation method === The service uses a proprietary algorithm with convolutional neural networks (CNNs) that have been trained with the Linguee database. According to the developers, the service uses a newer improved architecture of neural networks, resulting in a more natural sound of translations than by competing services. The translation is generated using a supercomputer that reaches 5.1 petaflops and is operated in Iceland with hydropower. DeepL's data centers are located at the EcoDataCenter in Falun, Sweden, which is a data center for sustainability. In general, CNNs are slightly more suitable for long coherent word sequences, but they have so far not been used by the competition because of their weaknesses compared to recurrent neural networks. The weaknesses of DeepL are compensated for by supplemental techniques, some of which are publicly known. === Translator and subscription === The translator can be used for free with a maximum limit of 1,500 characters per translation. Microsoft Word and PowerPoint files in Office Open XML file formats (.docx and .pptx) and PDF files up to 5MB in size can also be translated. It offers paid subscription DeepL Pro, which has been available since March 2018 and includes application programming interface access and a software plug-in for computer-assisted translation tools, including SDL Trados Studio. Unlike the free version, translated texts are stated to not be saved on the server; also, the character limit is removed. The monthly pricing model includes a set amount of text, with texts beyond that being calculated according to the number of characters. ==== Supported languages ==== As of May 2026, the translation service supports the following languages: Additionally, these languages are currently in beta, indicated by an asterisk after their name in the language picker: === DeepL Write === In November 2022, DeepL launched a tool to improve monolingual texts in English and German, called DeepL Write. In December, the company removed access and informed journalists that it was only for internal use and that DeepL Write would be relaunched in early 2023. The public beta version was then released on January 17, 2023. In the summer of 2024, DeepL announced the availability of two more languages in DeepL Write: French and Spanish. By January 2024, DeepL had added an additional two: Portuguese (European and Brazilian) and Italian. === DeepL Agent === In November 2025, DeepL launched an AI agent called DeepL Agent which is capable of operating business applications in a human-like manner. == Reception == The reception of DeepL has been generally positive. TechCrunch appreciates it for the accuracy of its translations and stating that it was more accurate and nuanced than Google Translate. Le Monde thanks its developers for translating French text into more "French-sounding" expressions. RTL Z stated that DeepL Translator "offers better translations […] when it comes to Dutch to English and vice versa". La Repubblica, and a Latin American website, "WWWhat's new?", showed praise as well. A 2018 paper by the University of Bologna evaluated the Italian-to-German translation capabilities and found the preliminary results to be similar in quality to Google Translate. In September 2021, Slator remarked that the language industry response was more measured than the press and noted that DeepL is still highly regarded by users. A reviewer noted in 2018 that DeepL had far fewer languages available for translation than competing products. == Awards and honors == DeepL won the 2020 Webby Award for Best Practices and the 2020 Webby Award for Technical Achievement (Apps, Mobile, and Features), both in the category Apps, Mobile & Voice. In April 2025, DeepL was featured in the Forbes AI 50 list.

  Read more →
• 

  Clue (mobile app)

  Clue is a menstrual health app developed by the Berlin-based technology company BioWink GmbH. The app has over 15 million users from 180 countries. The startup has raised over $17 million from backers that include Union Square Ventures and Mosaic Ventures. == History == Clue was co-founded by Ida Tin, Hans Raffauf, Mike LaVigne and Moritz von Buttlar in 2012. BioWink GmbH launched the app in 2013. Ida Tin's stated goal was to take female reproductive health “out of taboo land” and to start “a reproductive health revolution.” Tin previously led motorbike tours around the world and wrote a book about her experience. By July 2017, the Clue app had more than 8 million active users on both Android and iOS. Users were representative of more than 180 countries. In 2015, BioWink GmbH closed a $7 million Series A funding round led by Union Square Ventures and Mosaic Ventures, bringing the company's total funding to $10 million. The company was listed as one of Europe's Hottest Startups in 2015 by Wired UK, with Clue being named one of the best apps in 2015 by both Apple and Google. In March 2018, the company launched an editorial site to serve as a resource for accessible and scientific menstrual health information. == Mobile app == The Clue mobile application calculates and predicts a user's period, fertile window, and premenstrual syndrome. It also informs users the most or least likely time for becoming pregnant and allows them to track more than 30 health categories, including sex, sleep, pain, exercise, hair, skin, digestion, emotions and energy. The app can also explain how pill dosages impact fertility and includes an alarm system to allow for reminders for taking pills. In 2015, the company closed a Series A funding round and announced plans to use the proceeds to expand features of the mobile app and hire more staff. Clue also partnered with universities such as Stanford University, Columbia University, University of Washington, and University of Oxford to advance female health research. Clue integrated with Apple Inc.'s HealthKit for iOS 9 in September 2015, allowing data such as body temperature, cervical mucus quality, menstruation, ovulation test results, sexual activity, and spotting directly to the app. In 2016, Clue was available in 15 languages on both iOS and Android. That same year, Clue introduced a cycle-sharing feature and in 2017 a pill-tracking option. In February 2018, Clue made its app available on the Fitbit Ionic smartwatch. In 2026, Clue partnered with UK-based digital healthcare platform Evaro, an NHS-licensed provider, to offer embedded prescription services within the app.

  Read more →
• 

  AI Photo Editors Reviews: What Actually Works in 2026

  Curious about the best AI photo editor? An AI photo editor is software that uses machine learning to help you get more done — it combines speed, accuracy, and an interface that just works. Hands-on testing shows real-world results vary, so a short free trial is the smartest way to decide. Whether you are a beginner or a pro, the right AI photo editor slots into your workflow and pays for itself fast. This guide breaks down the top picks, their pros and cons, and who each one is best for.

  Read more →
• 

  Levenshtein automaton

  In computer science, a Levenshtein automaton for a string w and a number n is a finite-state automaton that can recognize the set of all strings whose Levenshtein distance from w is at most n. That is, a string x is in the formal language recognized by the Levenshtein automaton if and only if x can be transformed into w by at most n single-character insertions, deletions, and substitutions. == Applications == Levenshtein automata may be used for spelling correction, by finding words in a given dictionary that are close to a misspelled word. In this application, once a word is identified as being misspelled, its Levenshtein automaton may be constructed, and then applied to all of the words in the dictionary to determine which ones are close to the misspelled word. If the dictionary is stored in compressed form as a trie, the time for this algorithm (after the automaton has been constructed) is proportional to the number of nodes in the trie, significantly faster than using dynamic programming to compute the Levenshtein distance separately for each dictionary word. It is also possible to find words in a regular language, rather than a finite dictionary, that are close to a given target word, by computing the Levenshtein automaton for the word, and then using a Cartesian product construction to combine it with an automaton for the regular language, giving an automaton for the intersection language. Alternatively, rather than using the product construction, both the Levenshtein automaton and the automaton for the given regular language may be traversed simultaneously using a backtracking algorithm. Levenshtein automata are used in Lucene for full-text searches that can return relevant documents even if the query is misspelled. == Construction == For any fixed constant n, the Levenshtein automaton for w and n may be constructed in time O(|w|). Mitankin studies a variant of this construction called the universal Levenshtein automaton, determined only by a numeric parameter n, that can recognize pairs of words (encoded in a certain way by bitvectors) that are within Levenshtein distance n of each other. Touzet proposed an effective algorithm to build this automaton. Yet a third finite automaton construction of Levenshtein (or Damerau–Levenshtein) distance are the Levenshtein transducers of Hassan et al., who show finite state transducers implementing edit distance one, then compose these to implement edit distances up to some constant.

  Read more →