AI Ease Headshot Generator

AI Ease Headshot Generator — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Language technology

  Language technology, often called human language technology (HLT), studies methods of how computer programs or electronic devices can analyze, produce, modify or respond to human texts and speech. Working with language technology often requires broad knowledge not only about linguistics but also about computer science. It consists of natural language processing (NLP) and computational linguistics (CL) on the one hand, many application oriented aspects of these, and more low-level aspects such as encoding and speech technology on the other hand. Note that these elementary aspects are normally not considered to be within the scope of related terms such as natural language processing and (applied) computational linguistics, which are otherwise near-synonyms. As an example, for many of the world's lesser known languages, the foundation of language technology is providing communities with fonts and keyboard setups so their languages can be written on computers or mobile devices. Other tools also are part of modern language technology and include machine translation, speech recognition, text processing and natural language processing. Large scale AI models have recently advanced the field and enhanced the ability of machines to interpret complex human context.

  Read more →
• 

  Two-phase commit protocol

  In transaction processing, databases, and computer networking, the two-phase commit protocol (2PC, tupac) is a type of atomic commitment protocol (ACP). It is a distributed algorithm that coordinates all the processes that participate in a distributed atomic transaction on whether to commit or abort (roll back) the transaction. This protocol (a specialised type of consensus protocol) achieves its goal even in many cases of temporary system failure (involving either process, network node, communication, etc. failures), and is thus widely used. However, it is not resilient to all possible failure configurations, and in rare cases, manual intervention is needed to remedy an outcome. To accommodate recovery from failure (automatic in most cases) the protocol's participants use logging of the protocol's states. Log records, which are typically slow to generate but survive failures, are used by the protocol's recovery procedures. Many protocol variants exist that primarily differ in logging strategies and recovery mechanisms. Though usually intended to be used infrequently, recovery procedures compose a substantial portion of the protocol, due to many possible failure scenarios to be considered and supported by the protocol. In a "normal execution" of any single distributed transaction (i.e., when no failure occurs, which is typically the most frequent situation), the protocol consists of two phases: The commit-request phase (or voting phase), in which a coordinator process attempts to prepare all the transaction's participating processes (named participants, cohorts, or workers) to take the necessary steps for either committing or aborting the transaction and to vote, either "Yes": commit (if the transaction participant's local portion execution has ended properly), or "No": abort (if a problem has been detected with the local portion), and The commit phase, in which, based on voting of the participants, the coordinator decides whether to commit (only if all have voted "Yes") or abort the transaction (otherwise), and notifies the result to all the participants. The participants then follow with the needed actions (commit or abort) with their local transactional resources (also called recoverable resources; e.g., database data) and their respective portions in the transaction's other output (if applicable). The two-phase commit (2PC) protocol should not be confused with the two-phase locking (2PL) protocol, a concurrency control protocol. == Assumptions == The protocol works in the following manner: one node is a designated coordinator, which is the master site, and the rest of the nodes in the network are designated the participants. The protocol assumes that: there is stable storage at each node with a write-ahead log, no node crashes forever, the data in the write-ahead log is never lost or corrupted in a crash, and any two nodes can communicate with each other. The last assumption is not too restrictive, as network communication can typically be rerouted. The first two assumptions are much stronger; if a node is totally destroyed then data can be lost. The protocol is initiated by the coordinator after the last step of the transaction has been reached. The participants then respond with an agreement message or an abort message depending on whether the transaction has been processed successfully at the participant. == Basic algorithm == === Commit request (or voting) phase === The coordinator sends a query to commit message to all participants and waits until it has received a reply from all participants. The participants execute the transaction up to the point where they will be asked to commit. They each write an entry to their undo log and an entry to their redo log. Each participant replies with: either an agreement message (participant votes Yes to commit), if the participant's actions succeeded; or an abort message (participant votes No to commit), if the participant experiences a failure that will make it impossible to commit. === Commit (or completion) phase === ==== Success ==== If the coordinator received an agreement message from all participants during the commit-request phase: The coordinator sends a commit message to all the participants. Each participant completes the operation, and releases all the locks and resources held during the transaction. Each participant sends an acknowledgement to the coordinator. The coordinator completes the transaction when all acknowledgements have been received. ==== Failure ==== If any participant votes No during the commit-request phase (or the coordinator's timeout expires): The coordinator sends a rollback message to all the participants. Each participant undoes the transaction using the undo log, and releases the resources and locks held during the transaction. Each participant sends an acknowledgement to the coordinator. The coordinator undoes the transaction when all acknowledgements have been received. ==== Message flow ==== Coordinator Participant QUERY TO COMMIT --------------------------------> VOTE YES/NO prepare/abort <------------------------------- commit/abort COMMIT/ROLLBACK --------------------------------> ACKNOWLEDGEMENT commit/abort <-------------------------------- end An next to the record type means that the record is forced to stable storage. == Disadvantages == The greatest disadvantage of the two-phase commit protocol is that it is a blocking protocol. If the coordinator fails permanently, some participants will never resolve their transactions: After a participant has sent an agreement message as a response to the commit-request message from the coordinator, it will block until a commit or rollback is received. A two-phase commit protocol cannot dependably recover from a failure of both the coordinator and a cohort member during the commit phase. If only the coordinator had failed, and no cohort members had received a commit message, it could safely be inferred that no commit had happened. If, however, both the coordinator and a cohort member failed, it is possible that the failed cohort member was the first to be notified, and had actually done the commit. Even if a new coordinator is selected, it cannot confidently proceed with the operation until it has received an agreement from all cohort members, and hence must block until all cohort members respond. == Implementing the two-phase commit protocol == === Common architecture === In many cases the 2PC protocol is distributed in a computer network. It is easily distributed by implementing multiple dedicated 2PC components similar to each other, typically named transaction managers (TMs; also referred to as 2PC agents or Transaction Processing Monitors), that carry out the protocol's execution for each transaction (e.g., The Open Group's X/Open XA). The databases involved with a distributed transaction, the participants, both the coordinator and participants, register to close TMs (typically residing on respective same network nodes as the participants) for terminating that transaction using 2PC. Each distributed transaction has an ad hoc set of TMs, the TMs to which the transaction participants register. A leader, the coordinator TM, exists for each transaction to coordinate 2PC for it, typically the TM of the coordinator database. However, the coordinator role can be transferred to another TM for performance or reliability reasons. Rather than exchanging 2PC messages among themselves, the participants exchange the messages with their respective TMs. The relevant TMs communicate among themselves to execute the 2PC protocol schema above, "representing" the respective participants, for terminating that transaction. With this architecture the protocol is fully distributed (does not need any central processing component or data structure), and scales up with number of network nodes (network size) effectively. This common architecture is also effective for the distribution of other atomic commitment protocols besides 2PC, since all such protocols use the same voting mechanism and outcome propagation to protocol participants. === Protocol optimizations === Database research has been done on ways to get most of the benefits of the two-phase commit protocol while reducing costs by protocol optimizations and protocol operations saving under certain system's behavior assumptions. ==== Presumed abort and presumed commit ==== Presumed abort or Presumed commit are common such optimizations. An assumption about the outcome of transactions, either commit, or abort, can save both messages and logging operations by the participants during the 2PC protocol's execution. For example, when presumed abort, if during system recovery from failure no logged evidence for commit of some transaction is found by the recovery procedure, then it assumes that the transaction has been aborted, and acts accordingly. This means that it does not matter if aborts are logged at all, and such logging can be saved under this assumption. Typical

  Read more →
• 

  Sedona Canada Principles

  The Sedona Canada Principles are a set of authoritative guidelines published by The Sedona Conference to aid members of the Canadian legal community involved in the identification, collection, preservation, review and production of electronically stored information (ESI). The principles were drafted by a small group of lawyers, judges and technologists called the Sedona Working Group 7 or Sedona Canada. Sedona Canada is an offshoot of The Sedona Conference which is an American "non-profit ... research and educational institute dedicated to the advanced study of law and policy in the areas of antitrust law, complex litigation, and intellectual property rights". == Background == Civil procedure in Canada is jurisdictional with each province following its own rules of civil procedure. However, each province must address the fact that due to the advancement of technology the discovery process enshrined in the rules of civil procedure can be potentially derailed due to the sheer volume of electronically stored information (ESI). When dealing with litigation matters that involve electronically stored information (ESI), the discovery process is commonly called e-discovery. The problems associated with e-discovery in Canada led to the creation of the Sedona Canada Principles. Rule 29.1.03(4) of the wikibooks:Ontario Rules of Civil Procedure specifically refers to the Sedona Canada Principles in referencing Principles re Electronic Discovery although it has been reported that this rule has been largely ignored in practice. == Summary == The Sedona Canada Principles largely refer to the processes found in the Electronic Discovery Reference Model. The principles urge proportionality due to the potentially enormous volumes of documents that may be discoverable when dealing with ESI. They also encourage good faith in the document preservation stage and regular meetings between parties to discuss the scope of the litigation. Parties are urged to be aware of the potential costs involved in producing relevant ESI but are advised that only reasonably accessible ESI need be produced. The principles stipulate that parties should not be required to search for or collect deleted material unless there is an agreement or court order related to those terms. The use of electronic tools and processes such as data sampling and web harvesting are acceptable practices. Parties are encouraged to agree early in the litigation process on production format required for the exchange of relevant documents as part of the discovery process (native files, pdf, tiff, metadata requirements etc.). Agreements or direction should be sought, if necessary, with respect to privilege or other confidential information related to production of electronic documents and data. Parties should be aware that legal precedents can be formed as a result of e-discovery practices and sanctions can be considered for a party's failure to meet their discovery obligations unless it can be demonstrated that the failure was not intentional. All parties must bear the “reasonable” costs associated with e-discovery but other arrangements can be agreed upon by the parties or by court order. == Caselaw == In Warman v. National Post Company proportionality was at issue in a case where the plaintiff was suing the defendant for libel. A motion was brought by the defendant to have the plaintiff provide a mirror image of his hard drive in an effort to prove an internet article was indeed authored by the plaintiff. Issues of proportionality and the work of the Sedona Conference and Sedona Canada Principles were factored in to the decision to grant the defendant only limited access to the hard drive. In Innovative Health Group Inc. v. Calgary Health Region the plaintiff's legal obligation to produce imaged hard drives is in question. Justice Conrad refers to the advice of Sedona Canada on proportionality and problems associated with time and expense related to the difficulties associated with electronically stored information. In York University v. Michael Markicevic Justice Brown specifically refers to the need for the parties to agree upon a formal e-discovery plan to be drafted in consultation with Sedona Canada Principles. In Friends of Lansdowne v. Ottawa Master MacLeod refers to the need for Sedona Canada principles and states “This is particularly true in the current information age when e-mail is ubiquitous and multiple copies or variants of messages may be held on various kinds of data storage devices including individual hard drives, e-mail and Blackberry servers. Even documents that ultimately exist in paper form normally begin their life on computers and negotiations frequently involve exchanges of electronic drafts. To find every scrap of paper and every electronic trace of relevant information has become a nightmarish task that threatens to render any kind of litigation extravagantly expensive.” == Criticism == Critics of the Sedona Canada Principles believe they should address system integrity and that the true history of any file preserved cannot be identified without proof of the integrity of the electronic record systems management it comes from. Other criticism is more directed to the Sedona Canada working group and complaints that it is insular and irrelevant.

  Read more →
• 

  Transliteracy

  Transliteracy is "a fluidity of movement across a range of technologies, media and contexts". It is an ability to use diverse techniques to collaborate across different social groups. Transliteracy combines a range of capabilities required to move across a range of contexts, media, technologies and genres. Conceptually, transliteracy is situated across five capabilities: information capabilities (see information literacy), ICT (information and communication technologies), communication and collaboration, creativity and critical thinking. It is underpinned by literacy and numeracy. (See figure below) The concept of transliteracy is impacting the system of education and libraries. == History == While the term appears to come from the prefix trans- ('across') and the word literacy, the scholars who coined it say they developed it from the practice of transliteration, which means to use the letters of one language to write down a different language. The study of transliteracy was first developed in 2005 by the Transliteracies Research Project, directed by University of California at Santa Barbara Professor Alan Liu. The concept of 'transliteracies' was developed as part of research into online reading. It was shared and refined at the Transliteracies conference, held at UC Santa Barbara in 2005. The conference inspired the at the time De Montfort University Professor, Sue Thomas, to create the Production in Research and Transliteracy (PART) group, which evolved into the Transliteracy Research Group. The current meaning of transliteracy was defined in the group's seminal paper Transliteracy: crossing divides as "the ability to read, write, and interact across a range of platforms, tools, and media from signing and orality through handwriting, print, TV, radio, and film, to digital social networks." The concept was enthusiastically adopted by a number of professional groups, notably in the library and information field. Transliteracy Research Group Archive 2006–2013 curates numerous resources from this period. For a number of years, there was a gap between significant interest in transliteracy among professional groups and the scarcity of research. A group of academics from the University of Bordeaux considered transliteracy mainly in the school context. Freelance writer and consultant, Sue Thomas, studied transliteracy and creativity, while Suzana Sukovic, executive director of educational research and evidence-based practice at HETI, researched transliteracy in relation to digital storytelling. The first book on the topic, Transliteracy in complex information environment by Sukovic, is based on research and experience with practice-based projects. == Transliteracy in education == Transliteracy is making an impact on the classroom setting because of how technologically advanced younger generations are today. In 2012, Adam Marcus, a teacher and librarian at the New York City Department of Education (NYCDOE), decided to incorporate transliteracy into his school's public library summer reading program. He had a desire to enhance the experience of reading for his students by allowing them to connect to the text differently by using social media. He used a tool called VoiceThread in order to have his students "take part in conversations, formulate ideas, and share higher-order thinking through a variety of media channels: video, audio, text, images, and music". Students were also enabled to communicate with the book's author through blogs and websites, and were given multiple modes of media to comprehend and engage with the text on a deeper level. Some of these examples include an audio-video glossary and web links that aimed to bring the details of the text to life. The results of his experiment were deemed to have a positive effect on the program as students responded well to this interactive experience they were given. Marcus believes that it is important for educators and librarians to enhance storytelling for children by providing them with a modern and transliterate experience that one could not receive back then. The Agence nationale de la recherche funded a program at a French high school from 2013 to 2015, where the transliteracy skills of students were tested and observed. Students were placed in groups of three or four members and were required to use all sorts of media and tools in order to collect data for their projects. They were not allowed to only use digital sources, and were advised to use a diversity of sources. The focus of this experiment was to observe "the possible diversity of media and tools employed, on the ways of and reasons for switching from one to another, on how these different media and tools are distributed within contexts, according to the academic requirements and tasks individually and collectively performed by the students." The conclusions of the experiment dealt with physical space and organization being an issue for students and teachers to deal with. Spatially, it was challenging for students to navigate through different mediums when their space inside the classroom was limited. It was noticed that students were prone to use something that took up less space, rather than focusing on expanding their diversity of sources. Organizationally, it was challenging for students to organize all of the information they collected since everything was not being search and collected for digitally. In addition, students were not allotted a lot of time to complete their projects which also impacted their final product. == Transliteracy in libraries == In 2009, Dr. Susie Andretta, senior lecturer in Information Management at London Metropolitan University, conducted interviews with four different information professionals including an academic librarian, an outreach librarian, a content manager, and a scholar within the library science and information discipline. She was aiming to explore how transliteracy was colliding and combining with the print-world of libraries. Dr. Andretta defines transliteracy as "an umbrella term encompassing different literacies and multiple communication channels that require active participation with and across a range of platforms, and embracing both linear and non-linear messages (3)." The goals of these interviews ranged from the following: to test the information professional's awareness of transliteracy, to have them identify transliteracy and how it is integrated into their work, and to explain the impact transliteracy has had on they library they work at. Andretta found that out of all the information professionals interviewed, it was only the academic librarian who was vaguely familiar with the concept of transliteracy. Bernadette Daly Swanson, an Academic Librarian at UC Davis, expresses in her interview with Dr. Andretta how she would "like to think that the transliterate library is more of an environment where we do different things [...] I would take maybe about a third of the first floor of our library and transform it into a lab [...] where we can start to evolve [..] explore, and experiment in media development, content development, and do it not just with librarians; so open up the space for other people [...] so you don't get people working in isolation." Although the other three candidates that Dr. Andretta interviewed had not heard of the term transliteracy, they responded well to the concept once it was explained to them and agreed with its impact on the workplace. Dr. Michael Stephens, an assistant professor in the Graduate School of Library and Information Science at Dominican University, explains in his interview how the term transliteracy describes the courses he teaches on libraries and Web 2.0 technologies. Dr. Stephens states that students being educated in Web 2.0 technologies gives them "the opportunity to experience what the channel can be and the potential for that sharing learning, for asking questions, just for out loud thinking – I think it's incredibly valuable. [..] this is where this wonderful concept comes in, it was teaching them transliteracy and the fact that they can move across channels without getting worried about it." Dr. Andretta concluded from her interviews how although transliteracy may not be a very well-known term yet, it has nonetheless established itself into the intuition of libraries while also transforming the traditional library to a world of enhanced and expanded services. "Inherent in this transition are the challenges of having to adapt to a constantly changing technological landscape, the multiple literacies that this generates, and the need to establish a multifaceted library profession that can speak the multiple-media languages of its diverse users." Thomas Ipri, a librarian at the University of Nevada, advocates for libraries needing to make a change in their literary functions. He argues that the divide between digital and print makes it harder for libraries to accommodate their patrons and to share information. He f

  Read more →
• 

  Timeline of artificial intelligence risks in global finance

  The following article is a broad timeline of the course of events related to artificial intelligence risks in global finance. The AI boom has led to concerns including the existential risk from artificial intelligence, as the uptake on applications of artificial intelligence increases. By late 2025, global finance and artificial intelligence were "deeply intertwined". A June 2025 Menlo Ventures report raised concerns about the sustainability of future revenue and long-term profitability of AI, given the relatively low rate of consumer monetization. == 2017 == 30 NovemberThe New York Times said that new AI reports by McKinsey & Company, the National Bureau of Economic Research, and an AI Index created by university researchers, indicated an early AI boom. The Index built on a project—"The One Hundred Year Study on Artificial Intelligence" launched in 2014. == 2018 == 2018 was a year of incremental AI growth in finance. == 2022 == The release of ChatGPT by OpenAI became the catalyst for an artificial intelligence boom that continues to remake the global economy. According to a European Central Bank report, public interest in AI increased rapidly as evidenced with rising Google searches, AI jobs, models, patents, and innovations since late 2022. At that time Europe led the US in the size of its AI workforce. == 2023 == The regulatory body, the International Monetary Fund (IMF), published their report, "Generative Artificial Intelligence in Finance: Risk Considerations", drawing attention to oversight gaps and the need for regulations. The report explores the risks posed by using generative artificial intelligence (GenAI) systems in the financial sector including "broader risks to financial stability." == 2024 == January 12 In January 2024 Bloomberg's published its list of the "Magnificent Seven" Big Tech companies on the stock market based on their strength, size and market capitalization:Apple, Microsoft, Alphabet (Google), Amazon, Meta Platforms (Facebook), Nvidia, and Tesla. 21 June During the AI boom, Nvidia became the world's most valuable company, surpassing Microsoft, as its value increased to over US$4 trillion. In 2023 and 2024, the "Magnificent Seven" stocks were the primary drivers behind the increase in equity indexes, according to Reuters. == 2025 == === January === 23 January President Donald Trump's AI policy was announced calling for United States global leadership in artificial intelligence. The Economist noted that this politic shift in which the United States seeks "global dominance" in AI includes trimming regulations and assisting in expansion of infrastructure and increase in number of AI workers. Governments of Gulf nations were also investing trillions of dollars in AI. 27 January Against the backdrop of a tech war between China and the United States over AI dominance, within days of the launch of China's free DeepSeek App, it was the most downloaded app in the United States, rising to the first place in the Apple app store. President Trump responded immediately, saying this "sudden rise" should be a "wake-up" call to the United States, and called on US companies to be more competitive. === June === 26 June In their June 2025 report, Menlo Ventures estimated that only about 3% of consumers paid for artificial intelligence-related services, representing about $USD12 billion in annual spending. This is relatively low in contrast to the massive capital expenditure by AI infrastructure companies, which raises concerns about revenue sustainability and long-term profitability. === July === 23 July The Trump administration launched the US AI Action Plan, positioning the United States in a high-stakes technological race with China for global dominance in artificial intelligence, emphasizing that neither nation can afford to fall behind due to the exponential nature of AI advancement. The plan, a new government website and policy speech called for accelerated AI adoption across federal agencies, and a number of initiatives to make is easier for AI infrastructure expansion, and other measures to ensure American leadership in AI standards. Some leading experts warned that the administration failed to provide sufficient regulations and safeguards for AI safety. Concerns were raised about the negative impacts of cuts to research funding and tightened visa policies for scientists, potentially undermining public trust and America's ability to compete internationally. === September === 7 September The Economist cautioned that AI revenues are relatively modest compared to the high cost and investments in the creation of new data centers. Even Sam Altman, OpenAI CEO and one of the leading figures of the AI boom,, raised concerns about investors' outsized hopes for financial returns. At the same time, history has shown that new technologies, like railways and electricity, endured and spread after the initial hype faded. 12 September Economists warn that U.S. households' direct and indirect investments—mutual funds or retirement plans—in the stock market reached an unprecedented historically high level, now representing 45% of all financial assets, or about $USD51.2 trillion. Compared to the Dot-com bubble this represents a sharp increase in exposure. This makes U.S. households vulnerable to market downturns which in turn would result in decreasing consumer spending. U.S. household net worth rose to a record $176.3 trillion in the second quarter, an increase of $7.3 trillion since early 2025 and about $46 trillion higher than before the pandemic. Federal Reserve data attribute the surge primarily to gains in stock markets and housing values. However, the rise in wealth on paper coincided with increased household borrowing and growing government debt. 18 September Questions were being raised about how quickly the data centers, chips, servers, and GPUs assets of major AI companies will depreciate in value. Comparisons have been made to the Railway Mania in the aftermath of the stock market bubble where a valuable physical infrastructure remained standing, and the telecoms crash after the dot-com bubble which left fiber networks. 28 September There were warnings that record-high American stock ownership during the AI-fueled market boom is a red flag for systemic risk, as the current concentration in equities exceeds levels seen before the dot-com bubble burst in 2000, and could amplify the impact of any future stock market correction. === October === 3 October In 2025 alone, venture capitalists invested almost $USD200 billion in the artificial intelligence sector. 29 October Nvidia was the first company in the world to be valued at US$5 trillion, largely due to AI demand and strategic partnerships with leading technology and AI firms. Nvidia's increase in value was "meteoric". === November === 2 November Forbes reported that, since April, the 'Magnificent Seven' tech giants together contributed over 40% of the S&P 500's return, highlighting their outsized influence and the growing impact of AI on market valuations. CNN warned that while there is a current benefit to investors, with such a high concentration in the S&P 500, they are highly exposed to the fate of the Mag Seven. 2 November Globally there are 11,000 datacentres—huge campuses for AI infrastructure, including thousands of chips, GPUS, and servers. This represents a 500% increase over the last two decades. It is anticipated that $3USDtn more will be spent on increasing that number over the next two or three years. 5 November Concerns about the potential for a market bubble were raised as six of the AI-related Big Tech "Magnificent Seven"—that contribute to the AI boom—reported losing ground in the stock market. Global markets and artificial intelligence have become "deeply intertwined", according to a Reuters report. As of November 2025, more than 50% of the 20 largest S&P firms were deeply exposed to AI. In contrast, in 2000, the 20 S&P 500 firms represented 39% of its total value only 11 of these companies were exposed to the internet. If AI fails to deliver strong returns on their investments, these top S&P firms would be significantly impacted, according to the Economist. Analysts suggest that the AI market in 2025 may not behave like a traditional one, as investors are simultaneously aware of the risks and driven by the potential for outsized rewards. Leading AI labs may believe that the first company to achieve artificial general intelligence (AGI), when an AI system surpasses all human cognitive abilities and becomes capable of self-improvement—could dominate the future of technology and finance. While some have estimated that the potential value of such a breakthrough could be as high as $1.46 quadrillion, this figure is speculative and widely debated. 5 November Bloomberg described Nvidia's H100 Hopper-Blackwell AI chips as the "King of AI chips". Nvidia dominates the AI chip market with over 78% of the market share because of both speed and cost. According to B

  Read more →
• 

  Token-based replay

  Token-based replay technique is a conformance checking algorithm that checks how well a process conforms with its model by replaying each trace on the model (in Petri net notation ). Using the four counters produced tokens, consumed tokens, missing tokens, and remaining tokens, it records the situations where a transition is forced to fire and the remaining tokens after the replay ends. Based on the count at each counter, we can compute the fitness value between the trace and the model. == The algorithm == Source: The token-replay technique uses four counters to keep track of a trace during the replaying: p: Produced tokens c: Consumed tokens m: Missing tokens (consumed while not there) r: Remaining tokens (produced but not consumed) Invariants: At any time: p + m ≥ c ≥ m {\displaystyle p+m\geq c\geq m} At the end: r = p + m − c {\displaystyle r=p+m-c} At the beginning, a token is produced for the source place (p = 1) and at the end, a token is consumed from the sink place (c' = c + 1). When the replay ends, the fitness value can be computed as follows: 1 2 ( 1 − m c ) + 1 2 ( 1 − r p ) {\displaystyle {\frac {1}{2}}(1-{\frac {m}{c}})+{\frac {1}{2}}(1-{\frac {r}{p}})} == Example == Suppose there is a process model in Petri net notation as follows: === Example 1: Replay the trace (a, b, c, d) on the model M === Step 1: A token is initiated. There is one produced token ( p = 1 {\displaystyle p=1} ). Step 2: The activity a {\displaystyle \mathbf {a} } consumes 1 token to be fired and produces 2 tokens ( p = 1 + 2 = 3 {\displaystyle p=1+2=3} and c = 1 {\displaystyle c=1} ). Step 3: The activity b {\displaystyle \mathbf {b} } consumes 1 token and produces 1 token ( p = 3 + 1 = 4 {\displaystyle p=3+1=4} and c = 1 + 1 = 2 {\displaystyle c=1+1=2} ). Step 4: The activity c {\displaystyle \mathbf {c} } consumes 1 token and produces 1 token ( p = 4 + 1 = 5 {\displaystyle p=4+1=5} and c = 2 + 1 = 3 {\displaystyle c=2+1=3} ). Step 5: The activity d {\displaystyle \mathbf {d} } consumes 2 tokens and produces 1 token ( p = 5 + 1 = 6 {\displaystyle p=5+1=6} , c = 3 + 2 = 5 {\displaystyle c=3+2=5} ). Step 6: The token at the end place is consumed ( c = 5 + 1 = 6 {\displaystyle c=5+1=6} ). The trace is complete. The fitness of the trace ( a , b , c , d {\displaystyle \mathbf {a,b,c,d} } ) on the model M {\displaystyle \mathbf {M} } is: 1 2 ( 1 − m c ) + 1 2 ( 1 − r p ) = 1 2 ( 1 − 0 6 ) + 1 2 ( 1 − 0 6 ) = 1 {\displaystyle {\frac {1}{2}}(1-{\frac {m}{c}})+{\frac {1}{2}}(1-{\frac {r}{p}})={\frac {1}{2}}(1-{\frac {0}{6}})+{\frac {1}{2}}(1-{\frac {0}{6}})=1} === Example 2: Replay the trace (a, b, d) on the model M === Step 1: A token is initiated. There is one produced token ( p = 1 {\displaystyle p=1} ). Step 2: The activity a {\displaystyle \mathbf {a} } consumes 1 token to be fired and produces 2 tokens ( p = 1 + 2 = 3 {\displaystyle p=1+2=3} and c = 1 {\displaystyle c=1} ). Step 3: The activity b {\displaystyle \mathbf {b} } consumes 1 token and produces 1 token ( p = 3 + 1 = 4 {\displaystyle p=3+1=4} and c = 1 + 1 = 2 {\displaystyle c=1+1=2} ). Step 4: The activity d {\displaystyle \mathbf {d} } needs to be fired but there are not enough tokens. One artificial token was produced and the missing token counter is increased by one ( m = 1 {\displaystyle m=1} ). The artificial token and the token at place [ b , d ] {\displaystyle [\mathbf {b,d} ]} are consumed ( c = 2 + 2 = 4 {\displaystyle c=2+2=4} ) and one token is produced at place end ( p = 4 + 1 = 5 {\displaystyle p=4+1=5} ). Step 5: The token in the end place is consumed ( c = 4 + 1 = 5 {\displaystyle c=4+1=5} ). The trace is complete. There is one remaining token at place [ a , c ] {\displaystyle [\mathbf {a,c} ]} ( r = 1 {\displaystyle r=1} ). The fitness of the trace ( a , b , d {\displaystyle \mathbf {a,b,d} } ) on the model M {\displaystyle \mathbf {M} } is: 1 2 ( 1 − m c ) + 1 2 ( 1 − r p ) = 1 2 ( 1 − 1 5 ) + 1 2 ( 1 − 1 5 ) = 0.8 {\displaystyle {\frac {1}{2}}(1-{\frac {m}{c}})+{\frac {1}{2}}(1-{\frac {r}{p}})={\frac {1}{2}}(1-{\frac {1}{5}})+{\frac {1}{2}}(1-{\frac {1}{5}})=0.8}

  Read more →
• 

  Run-time algorithm specialization

  In computer science, run-time algorithm specialization is a methodology for creating efficient algorithms for costly computation tasks of certain kinds. The methodology originates in the field of automated theorem proving and, more specifically, in the Vampire theorem prover project. The idea is inspired by the use of partial evaluation in optimising program translation. Many core operations in theorem provers exhibit the following pattern. Suppose that we need to execute some algorithm a l g ( A , B ) {\displaystyle {\mathit {alg}}(A,B)} in a situation where a value of A {\displaystyle A} is fixed for potentially many different values of B {\displaystyle B} . In order to do this efficiently, we can try to find a specialization of a l g {\displaystyle {\mathit {alg}}} for every fixed A {\displaystyle A} , i.e., such an algorithm a l g A {\displaystyle {\mathit {alg}}_{A}} , that executing a l g A ( B ) {\displaystyle {\mathit {alg}}_{A}(B)} is equivalent to executing a l g ( A , B ) {\displaystyle {\mathit {alg}}(A,B)} . The specialized algorithm may be more efficient than the generic one, since it can exploit some particular properties of the fixed value A {\displaystyle A} . Typically, a l g A ( B ) {\displaystyle {\mathit {alg}}_{A}(B)} can avoid some operations that a l g ( A , B ) {\displaystyle {\mathit {alg}}(A,B)} would have to perform, if they are known to be redundant for this particular parameter A {\displaystyle A} . In particular, we can often identify some tests that are true or false for A {\displaystyle A} , unroll loops and recursion, etc. == Difference from partial evaluation == The key difference between run-time specialization and partial evaluation is that the values of A {\displaystyle A} on which a l g {\displaystyle {\mathit {alg}}} is specialised are not known statically, so the specialization takes place at run-time. There is also an important technical difference. Partial evaluation is applied to algorithms explicitly represented as codes in some programming language. At run-time, we do not need any concrete representation of a l g {\displaystyle {\mathit {alg}}} . We only have to imagine a l g {\displaystyle {\mathit {alg}}} when we program the specialization procedure. All we need is a concrete representation of the specialized version a l g A {\displaystyle {\mathit {alg}}_{A}} . This also means that we cannot use any universal methods for specializing algorithms, which is usually the case with partial evaluation. Instead, we have to program a specialization procedure for every particular algorithm a l g {\displaystyle {\mathit {alg}}} . An important advantage of doing so is that we can use some powerful ad hoc tricks exploiting peculiarities of a l g {\displaystyle {\mathit {alg}}} and the representation of A {\displaystyle A} and B {\displaystyle B} , which are beyond the reach of any universal specialization methods. == Specialization with compilation == The specialized algorithm has to be represented in a form that can be interpreted. In many situations, usually when a l g A ( B ) {\displaystyle {\mathit {alg}}_{A}(B)} is to be computed on many values of B {\displaystyle B} in a row, a l g A {\displaystyle {\mathit {alg}}_{A}} can be written as machine code instructions for a special abstract machine, and it is typically said that A {\displaystyle A} is compiled. The code itself can then be additionally optimized by answer-preserving transformations that rely only on the semantics of instructions of the abstract machine. The instructions of the abstract machine can usually be represented as records. One field of such a record, an instruction identifier (or instruction tag), would identify the instruction type, e.g. an integer field may be used, with particular integer values corresponding to particular instructions. Other fields may be used for storing additional parameters of the instruction, e.g. a pointer field may point to another instruction representing a label, if the semantics of the instruction require a jump. All instructions of the code can be stored in a traversable data structure such as an array, linked list, or tree. Interpretation (or execution) proceeds by fetching instructions in some order, identifying their type, and executing the actions associated with said type. In many programming languages, such as C and C++, a simple switch statement may be used to associate actions with different instruction identifiers. Modern compilers usually compile a switch statement with constant (e.g. integer) labels from a narrow range by storing the address of the statement corresponding to a value i {\displaystyle i} in the i {\displaystyle i} -th cell of a special array, as a means of efficient optimisation. This can be exploited by taking values for instruction identifiers from a small interval of values. == Data-and-algorithm specialization == There are situations when many instances of A {\displaystyle A} are intended for long-term storage and the calls of a l g ( A , B ) {\displaystyle {\mathit {alg}}(A,B)} occur with different B {\displaystyle B} in an unpredictable order. For example, we may have to check a l g ( A 1 , B 1 ) {\displaystyle {\mathit {alg}}(A_{1},B_{1})} first, then a l g ( A 2 , B 2 ) {\displaystyle {\mathit {alg}}(A_{2},B_{2})} , then a l g ( A 1 , B 3 ) {\displaystyle {\mathit {alg}}(A_{1},B_{3})} , and so on. In such circumstances, full-scale specialization with compilation may not be suitable due to excessive memory usage. However, we can sometimes find a compact specialized representation A ′ {\displaystyle A^{\prime }} for every A {\displaystyle A} , that can be stored with, or instead of, A {\displaystyle A} . We also define a variant a l g ′ {\displaystyle {\mathit {alg}}^{\prime }} that works on this representation and any call to a l g ( A , B ) {\displaystyle {\mathit {alg}}(A,B)} is replaced by a l g ′ ( A ′ , B ) {\displaystyle {\mathit {alg}}^{\prime }(A^{\prime },B)} , intended to do the same job faster.

  Read more →
• 

  Universal Data Element Framework

  The Universal Data Element Framework (UDEF) was a controlled vocabulary developed by The Open Group. It provided a framework for categorizing, naming, and indexing data. It assigned to every item of data a structured alphanumeric tag plus a controlled vocabulary name that describes the meaning of the data. This allowed relating data elements to similar elements defined by other organizations. UDEF defined a Dewey-decimal like code for each concept. For example, an "employee number" is often used in human resource management. It has a UDEF tag a.5_12.35.8 and a controlled vocabulary description "Employee.PERSON_Employer.Assigned.IDENTIFIER". UDEF has been superseded by the Open Data Element Framework (ODEF). == Examples == In an application used by a hospital, the last name and first name of several people could include the following example concepts: Patient Person Family Name – find the word “Patient” under the UDEF object “Person” and find the word “Family” under the UDEF property “Name” Patient Person Given Name – find the word “Patient” under the UDEF object “Person” and find the word “Given” under the UDEF property “Name” Doctor Person Family Name – find the word “Doctor” under the UDEF object “Person” and find the word “Family” under the UDEF property “Name” Doctor Person Given Name – find the word “Doctor” under the UDEF object “Person” and find the word “Given” under the UDEF property “Name” For the examples above, the following UDEF IDs are available: “Patient Person Family Name” the UDEF ID is “au.5_11.10” “Patient Person Given Name” the UDEF ID is “au.5_12.10” “Doctor Person Family Name” the UDEF ID is “aq.5_11.10” “Doctor Person Given Name” the UDEF ID is “aq.5_12.10”

  Read more →
• 

  Autonomous things

  Autonomous things, abbreviated AuT, or the Internet of autonomous things, abbreviated as IoAT, is an emerging term for the technological developments that are expected to bring computers into the physical environment as autonomous entities without human direction, freely moving and interacting with humans and other objects. Self-navigating drones are the first AuT technology in (limited) deployment. It is expected that the first mass-deployment of AuT technologies will be the autonomous car, generally expected to be available around 2020. Other currently expected AuT technologies include home robotics (e.g., machines that provide care for the elderly, infirm or young), and military robots (air, land or sea autonomous machines with information-collection or target-attack capabilities). AuT technologies share many common traits, which justify the common notation. They are all based on recent breakthroughs in the domains of (deep) machine learning and artificial intelligence. They all require extensive and prompt regulatory developments to specify the requirements from them and to license and manage their deployment (see the further reading below). And they all require unprecedented levels of safety (e.g., automobile safety) and security, to overcome concerns about the potential negative impact of the new technology. As an example, the autonomous car both addresses the main existing safety issues and creates new issues. It is expected to be much safer than existing vehicles, by eliminating the single most dangerous element – the driver. The US's National Highway Traffic Safety Administration estimates 94 percent of US accidents were the result of human error and poor decision-making, including speeding and impaired driving, and the Center for Internet and Society at Stanford Law School claims that "Some ninety percent of motor vehicle crashes are caused at least in part by human error". So while safety standards like the ISO 26262 specify the required safety, there is still a burden on the industry to demonstrate acceptable safety. While car accidents claim every year 35,000 lives in the US, and 1.25 million worldwide, some believe that even "a car that's 10 times as safe, which means 3,500 people die on the roads each year [in the US alone]" would not be accepted by the public. The acceptable level may be closer to the current figures on aviation accidents and incidents, with under a thousand worldwide deaths in most years – three orders of magnitude lower than cars. This underscores the unprecedented nature of the safety requirements that will need to be met for cars, with similar levels of safety expected for other Autonomous Things.

  Read more →
• 

  Ubiquitous computing

  Ubiquitous computing (or "ubicomp") is a concept in software engineering, hardware engineering and computer science where computing is made to appear seamlessly anytime and everywhere. In contrast to desktop computing, ubiquitous computing implies use on any device, in any location, and in any format. A user interacts with the computer, which can exist in many different forms, including laptop computers, tablets, smart phones and terminals in everyday objects such as a refrigerator or a pair of glasses. The underlying technologies to support ubiquitous computing include the Internet, advanced middleware, kernels, operating systems, mobile codes, sensors, microprocessors, new I/Os and user interfaces, computer networks, mobile protocols, global navigational systems, and new materials. This paradigm is also described as pervasive computing, ambient intelligence, or "everyware". Each term emphasizes slightly different aspects. When primarily concerning the objects involved, it is also known as physical computing, the Internet of Things, haptic computing, and "things that think". Rather than propose a single definition for ubiquitous computing and for these related terms, a taxonomy of properties for ubiquitous computing has been proposed, from which different kinds or flavors of ubiquitous systems and applications can be described. Ubiquitous computing themes include: distributed computing, mobile computing, location computing, mobile networking, sensor networks, human–computer interaction, context-aware smart home technologies, and artificial intelligence. == Core concepts == Ubiquitous computing is the concept of using small internet connected and inexpensive computers to help with everyday functions in an automated fashion. Mark Weiser proposed three basic forms for ubiquitous computing devices: Tabs: a wearable device that is approximately a centimeter in size Pads: a hand-held device that is approximately a decimeter in size Boards: an interactive larger display device that is approximately a meter in size Ubiquitous computing devices proposed by Mark Weiser are all based around flat devices of different sizes with a visual display. These conceptual device categories were later implemented at Xerox PARC in experimental systems including the PARCTab, PARCPad, and LiveBoard, which served as early prototypes of handheld, tablet-style, and large interactive display computing environments. Expanding beyond those concepts there is a large array of other ubiquitous computing devices that could exist. == History == Mark Weiser coined the phrase "ubiquitous computing" around 1988, during his tenure as Chief Technologist of the Xerox Palo Alto Research Center (PARC). Both alone and with PARC Director and Chief Scientist John Seely Brown, Weiser wrote some of the earliest papers on the subject, largely defining it and sketching out its major concerns. == Recognizing the effects of extending processing power == Recognizing that the extension of processing power into everyday scenarios would necessitate understandings of social, cultural and psychological phenomena beyond its proper ambit, Weiser was influenced by many fields outside computer science, including "philosophy, phenomenology, anthropology, psychology, post-Modernism, sociology of science and feminist criticism". He was explicit about "the humanistic origins of the 'invisible ideal in post-modernist thought'", referencing as well the ironically dystopian Philip K. Dick novel Ubik. Andy Hopper from Cambridge University UK proposed and demonstrated the concept of "Teleporting" – where applications follow the user wherever he/she moves. Roy Want (now at Google), while at Olivetti Research Ltd, designed the first "Active Badge System", which is an advanced location computing system where personal mobility is merged with computing. Later at Xerox PARC, he designed and built the "PARCTab" or simply "Tab", widely recognized as the world's first Context-Aware computer, which has great similarity to the modern smartphone. Bill Schilit (now at Google) also did some earlier work in this topic, and participated in the early Mobile Computing workshop held in Santa Cruz in 1996. Ken Sakamura of the University of Tokyo, Japan leads the Ubiquitous Networking Laboratory (UNL), Tokyo as well as the T-Engine Forum. The joint goal of Sakamura's Ubiquitous Networking specification and the T-Engine forum, is to enable any everyday device to broadcast and receive information. MIT has also contributed significant research in this field, notably Things That Think consortium (directed by Hiroshi Ishii, Joseph A. Paradiso and Rosalind Picard) at the Media Lab and the CSAIL effort known as Project Oxygen. Other major contributors include University of Washington (Shwetak Patel, Anind Dey and James Landay), Dartmouth College's HealthX Lab (directed by Andrew Campbell), Georgia Tech's College of Computing (Gregory Abowd and Thad Starner), Cornell Tech's People Aware Computing Lab (directed by Tanzeem Choudhury), NYU's Interactive Telecommunications Program, UC Irvine's Department of Informatics, Microsoft Research, Intel Research and Equator, Ajou University UCRi & CUS. == Examples == One of the earliest ubiquitous systems was artist Natalie Jeremijenko's "Live Wire", also known as "Dangling String", installed at Xerox PARC during Mark Weiser's time there. This was a piece of string attached to a stepper motor and controlled by a LAN connection; network activity caused the string to twitch, yielding a peripherally noticeable indication of traffic. Weiser called this an example of calm technology. A present manifestation of this trend is the widespread diffusion of mobile phones. Many mobile phones support high speed data transmission, video services, and other services with powerful computational ability. Although these mobile devices are not necessarily manifestations of ubiquitous computing, there are examples, such as Japan's Yaoyorozu ("Eight Million Gods") Project in which mobile devices, coupled with radio frequency identification tags demonstrate that ubiquitous computing is already present in some form. Ambient Devices has produced an "orb", a "dashboard", and a "weather beacon": these decorative devices receive data from a wireless network and report current events, such as stock prices and the weather, like the Nabaztag, which was invented by Rafi Haladjian and Olivier Mével, and manufactured by the company Violet. The Australian futurist Mark Pesce has produced a highly configurable 52-LED LAMP enabled lamp which uses Wi-Fi named MooresCloud after Gordon Moore. The Unified Computer Intelligence Corporation launched a device called Ubi – The Ubiquitous Computer designed to allow voice interaction with the home and provide constant access to information. Ubiquitous computing research has focused on building an environment in which computers allow humans to focus attention on select aspects of the environment and operate in supervisory and policy-making roles. Ubiquitous computing emphasizes the creation of a human computer interface that can interpret and support a user's intentions. For example, MIT's Project Oxygen seeks to create a system in which computation is as pervasive as air: In the future, computation will be human centered. It will be freely available everywhere, like batteries and power sockets, or oxygen in the air we breathe...We will not need to carry our own devices around with us. Instead, configurable generic devices, either handheld or embedded in the environment, will bring computation to us, whenever we need it and wherever we might be. As we interact with these "anonymous" devices, they will adopt our information personalities. They will respect our desires for privacy and security. We won't have to type, click, or learn new computer jargon. Instead, we'll communicate naturally, using speech and gestures that describe our intent... This is a fundamental transition that does not seek to escape the physical world and "enter some metallic, gigabyte-infested cyberspace" but rather brings computers and communications to us, making them "synonymous with the useful tasks they perform". Network robots link ubiquitous networks with robots, contributing to the creation of new lifestyles and solutions to address a variety of social problems including the aging of population and nursing care. The "Continuity" set of features, introduced by Apple in OS X Yosemite, can be seen as an example of ubiquitous computing. == Issues == Privacy is easily the most often-cited criticism of ubiquitous computing (ubicomp), and may be the greatest barrier to its long-term success. == Research centres == This is a list of notable institutions who claim to have a focus on Ubiquitous computing sorted by country: Canada Topological Media Lab, Concordia University, Canada Finland Community Imaging Group, University of Oulu, Finland Germany Telecooperation Office (TECO), Karlsruhe Institute of Technology, Ger

  Read more →
• 

  Chinese speech synthesis

  Chinese speech synthesis is the application of speech synthesis to the Chinese language (usually Standard Chinese). It poses additional difficulties due to Chinese characters frequently having different pronunciations in different contexts and the complex prosody, which is essential to convey the meaning of words, and sometimes the difficulty in obtaining agreement among native speakers concerning what the correct pronunciation is of certain phonemes. == Concatenation (Ekho and KeyTip) == Recordings can be concatenated in any desired combination, but the joins sound forced (as is usual for simple concatenation-based speech synthesis) and this can severely affect prosody; these synthesizers are also inflexible in terms of speed and expression. However, because these synthesizers do not rely on a corpus, there is no noticeable degradation in performance when they are given more unusual or awkward phrases. Ekho is an open source TTS which simply concatenates sampled syllables. It currently supports Cantonese, Mandarin, and experimentally Korean. Some of the Mandarin syllables have been pitched-normalised in Praat. A modified version of these is used in Gradint's "synthesis from partials". cjkware.com used to ship a product called KeyTip Putonghua Reader which worked similarly; it contained 120 Megabytes of sound recordings (GSM-compressed to 40 Megabytes in the evaluation version), comprising 10,000 multi-syllable dictionary words plus single-syllable recordings in 6 different prosodies (4 tones, neutral tone, and an extra third-tone recording for use at the end of a phrase). == Lightweight synthesizers (eSpeak and Yuet) == The lightweight open-source speech project eSpeak, which has its own approach to synthesis, has experimented with Mandarin and Cantonese. eSpeak was used by Google Translate from May 2010 until December 2010. The commercial product "Yuet" is also lightweight (it is intended to be suitable for resource-constrained environments like embedded systems); it was written from scratch in ANSI C starting from 2013. Yuet claims a built-in NLP model that does not require a separate dictionary; the speech synthesised by the engine claims clear word boundaries and emphasis on appropriate words. Communication with its author is required to obtain a copy. Both eSpeak and Yuet can synthesis speech for Cantonese and Mandarin from the same input text, and can output the corresponding romanisation (for Cantonese, Yuet uses Yale and eSpeak uses Jyutping; both use Pinyin for Mandarin). eSpeak does not concern itself with word boundaries when these don't change the question of which syllable should be spoken. == Corpus-based == A "corpus-based" approach can sound very natural in most cases but can err in dealing with unusual phrases if they can't be matched with the corpus. The synthesiser engine is typically very large (hundreds or even thousands of megabytes) due to the size of the corpus. === iFlyTek === Anhui USTC iFlyTek Co., Ltd (iFlyTek) published a W3C paper in which they adapted Speech Synthesis Markup Language to produce a mark-up language called Chinese Speech Synthesis Markup Language (CSSML) which can include additional markup to clarify the pronunciation of characters and to add some prosody information. The amount of data involved is not disclosed by iFlyTek but can be seen from the commercial products that iFlyTek have licensed their technology to; for example, Bider's SpeechPlus is a 1.3 Gigabyte download, 1.2 Gigabytes of which is used for the highly compressed data for a single Chinese voice. iFlyTek's synthesiser can also synthesise mixed Chinese and English text with the same voice (e.g. Chinese sentences containing some English words); they claim their English synthesis to be "average". The iFlyTek corpus appears to be heavily dependent on Chinese characters, and it is not possible to synthesize from pinyin alone. It is sometimes possible by means of CSSML to add pinyin to the characters to disambiguate between multiple possible pronunciations, but this does not always work. === NeoSpeech === There is an online interactive demonstration for NeoSpeech speech synthesis, which accepts Chinese characters and also pinyin if it's enclosed in their proprietary "VTML" markup. === Mac OS === Mac OS had Chinese speech synthesizers available up to version 9. This was removed in 10.0 and reinstated in 10.7 (Lion). === Historical corpus-based synthesizers (no longer available) === A corpus-based approach was taken by Tsinghua University in SinoSonic, with the Harbin dialect voice data taking 800 Megabytes. This was planned to be offered as a download but the link was never activated. Nowadays, only references to it can be found on Internet Archive. Bell Labs' approach, which was demonstrated online in 1997 but subsequently removed, was described in a monograph "Multilingual Text-to-Speech Synthesis: The Bell Labs Approach" (Springer, October 31, 1997, ISBN 978-0-7923-8027-6), and the former employee who was responsible for the project, Chilin Shih (who subsequently worked at the University of Illinois) put some notes about her methods on her website.

  Read more →
• 

  Aidoc

  Aidoc Medical is an Israeli technology company that develops computer-aided simple triage and notification systems. Aidoc has obtained U.S. Food and Drug Administration and CE mark approval for its stroke, pulmonary embolism, cervical fracture, intracranial hemorrhage, intra-abdominal free gas, and incidental pulmonary embolism algorithms. Aidoc algorithms are in use in more than 900 hospitals and imaging centers, including Montefiore Nyack Hospital, LifeBridge Health, LucidHealth, Yale New Haven Hospital, Cedars-Sinai Medical Center, University of Rochester Medical Center, and Sheba Medical Center. == History == Aidoc was founded in 2016 by Elad Walach as the CEO, Michael Braginsky as the CTO and Guy Reiner as the VP. In April 2017, the company raised $7M, led by TLV Partners, and in April 2019, the company raised another $27M, led by Square Peg capital. There have been several additional rounds of funding as well, bringing Aidoc's total investment to $370M as of July 2025. In August 2018, Aidoc gained FDA clearance for its intracranial hemorrhage system, and in May 2019 it received clearance for the pulmonary embolism system. In January 2020, the system for detecting large-vessel occlusions (LVOs) in head CTA examinations obtained FDA clearance. In October 2024, it was reported that Aidoc is working with NVIDIA to develop a framework for deployment and integration of artificial intelligence tools in healthcare. The Blueprint for Resilient Integration and Deployment of Guided Excellence (BRIDGE) is a guideline to facilitate AI adoption in the healthcare industry. == Products and market == Aidoc has developed a suite of artificial intelligence products that flag both time-sensitive and time-consuming (for the radiologist) abnormalities across the body. The algorithms are developed with large quantities of data to provide diagnostic aid for a broad set of pathologies. The company offers an array of algorithms that span across the body, including for intracranial hemorrhage, spine fractures (C, T & L), free air in the abdomen, pulmonary embolism, and more. It developed "Always-on AI", a term coined by Elad Walach that refers to a type of artificial intelligence that is "Always-on—constantly running in the background and automatically analyzing medical imaging data, identifying urgent findings, and sparing radiologists from "drowning" in vast amounts of irrelevant data. Aidoc's solutions cover medical conditions prevalent in all settings (ED/inpatient/outpatient), including level 1 trauma centers, outpatient imaging centers, teleradiology groups and, are set up in over 200 medical centers worldwide. Notable customers include the University of Rochester Medical Center and Global Diagnostics Australia. Aidoc announced in 2024 that its new Clinical AI Reasoning Engine (CARE1) had been submitted for FDA approval. In September 2025 Aidoc received a "Breakthrough Device Designation" from the FDA for a new multi-triage solution that spans numerous acute findings in CT scans. Aidoc's CARE1 foundation model was the basis of the workflow on which the designation was made, enabling simultaneous coverage of multiple pathologies. This new designation allows parallel FDA review of multiple indications under a single submission. In April 2026, Aidoc raised million in a Series E funding round led by Growth Equity at Goldman Sachs Alternatives, with participation from General Catalyst and NVentures. The financing brought the company's total funding to over million. == Clinical Research == A clinical study on Aidoc’ accuracy of deep convolutional neural networks for the detection of pulmonary embolism (PE) on CT pulmonary angiograms (CTPAs) was performed by the University Hospital of Basel and presented at the European Congress of Radiology, showing that the Aidoc algorithm reached 93% sensitivity and 95% specificity. Clinical research has also been performed to test the diagnostic performance of Aidoc's deep learning-based triage system for the flagging of acute findings in abdominal computed tomography (CT) examinations. Overall, the algorithm achieved 93% sensitivity (91/98, 7 false negatives) and 97% specificity (93/96, 3 false-positive) in the detection of acute abdominal findings. Additional clinical research on Aidoc's Intracranial hemorrhage algorithm accuracy was presented at the European Congress of Radiology by Antwerp University Hospital, evaluating the use of its deep learning algorithm for the detection of intracranial hemorrhage on non-contrast enhanced CT of the brain. The University of Washington completed a study on the accuracy of Aidoc's intracranial hemorrhage algorithm.

  Read more →
• 

  Spell checker

  In software, a spell checker (or spelling checker or spell check) is a software feature that checks for misspellings in a text. Spell-checking features are often embedded in software or services, such as a word processor, email client, electronic dictionary, or search engine. == Design == A basic spell checker carries out the following processes: It scans the text and extracts the words contained in it. It then compares each word with a known list of correctly spelled words (i.e. a dictionary). This might contain just a list of words, or it might also contain additional information, such as hyphenation points or lexical and grammatical attributes. An additional step is a language-dependent algorithm for handling morphology. Even for a lightly inflected language like English, the spell checker will need to consider different forms of the same word, such as plurals, verbal forms, contractions, and possessives. For many other languages, such as those featuring agglutination and more complex declension and conjugation, this part of the process is more complicated. It is unclear whether morphological analysis—allowing for many forms of a word depending on its grammatical role—provides a significant benefit for English, though its benefits for highly synthetic languages such as German, Hungarian, or Turkish are clear. As an adjunct to these components, the program's user interface allows users to approve or reject replacements and modify the program's operation. Spell checkers can use approximate string matching algorithms such as Levenshtein distance to find correct spellings of misspelled words. An alternative type of spell checker uses solely statistical information, such as n-grams, to recognize errors instead of correctly-spelled words. This approach usually requires a lot of effort to obtain sufficient statistical information. Key advantages include needing less runtime storage and the ability to correct errors in words that are not included in a dictionary. In some cases, spell checkers use a fixed list of misspellings and suggestions for those misspellings; this less flexible approach is often used in paper-based correction methods, such as the see also entries of encyclopedias. Clustering algorithms have also been used for spell checking combined with phonetic information. == History == === Pre-PC === In 1961, Les Earnest, who headed the research on this budding technology, saw it necessary to include the first spell checker that accessed a list of 10,000 acceptable words. Ralph Gorin, a graduate student under Earnest at the time, created the first true spelling checker program written as an applications program (rather than research) for general English text: SPELL for the DEC PDP-10 at Stanford University's Artificial Intelligence Laboratory, in February 1971. Gorin wrote SPELL in assembly language, for faster action; he made the first spelling corrector by searching the word list for plausible correct spellings that differ by a single letter or adjacent letter transpositions and presenting them to the user. Gorin made SPELL publicly accessible, as was done with most SAIL (Stanford Artificial Intelligence Laboratory) programs, and it soon spread around the world via the new ARPAnet, about ten years before personal computers came into general use. SPELL, its algorithms and data structures inspired the Unix ispell program. The first spell checkers were widely available on mainframe computers in the late 1970s. A group of six linguists from Georgetown University developed the first spell-check system for the IBM corporation. Henry Kučera invented one for the VAX machines of Digital Equipment Corp in 1981. === Unix === The International Ispell program commonly used in Unix is based on R. E. Gorin's SPELL. It was converted to C by Pace Willisson at MIT. The GNU project has its spell checker GNU Aspell. Aspell's main improvement is that it can more accurately suggest correct alternatives for misspelled English words. Due to the inability of traditional spell checkers to check words in complex inflected languages, Hungarian László Németh developed Hunspell, a spell checker that supports agglutinative languages and complex compound words. Hunspell also uses Unicode in its dictionaries. Hunspell replaced the previous MySpell in OpenOffice.org in version 2.0.2. Enchant is another general spell checker, derived from AbiWord. Its goal is to combine programs supporting different languages such as Aspell, Hunspell, Nuspell, Hspell (Hebrew), Voikko (Finnish), Zemberek (Turkish) and AppleSpell under one interface. === PCs === The first spell checkers for personal computers appeared in 1980, such as "WordCheck" for Commodore systems which was released in late 1980 in time for advertisements to go to print in January 1981. Developers such as Maria Mariani and Random House rushed OEM packages or end-user products into the rapidly expanding software market. On the pre-Windows PCs, these spell checkers were standalone programs, many of which could be run in terminate-and-stay-resident mode from within word-processing packages on PCs with sufficient memory. However, the market for standalone packages was short-lived, as by the mid-1980s developers of popular word-processing packages like WordStar and WordPerfect had incorporated spell checkers in their packages, mostly licensed from the above companies, who quickly expanded support from just English to many European and eventually even Asian languages. However, this required increasing sophistication in the morphology routines of the software, particularly with regard to heavily-agglutinative languages like Hungarian and Finnish. Although the size of the word-processing market in a country like Iceland might not have justified the investment of implementing a spell checker, companies like WordPerfect nonetheless strove to localize their software for as many national markets as possible as part of their global marketing strategy. When Apple developed "a system-wide spelling checker" for Mac OS X so that "the operating system took over spelling fixes," it was a first: one "didn't have to maintain a separate spelling checker for each" program. Mac OS X's spellcheck coverage includes virtually all bundled and third party applications. Visual Tools' VT Speller, introduced in 1994, was "designed for developers of applications that support Windows." It came with a dictionary but had the ability to build and incorporate use of secondary dictionaries. === Browsers === Web browsers such as Firefox and Google Chrome offer spell checking support, using Hunspell. Prior to using Hunspell, Firefox and Chrome used MySpell and GNU Aspell, respectively. === Specialties === Some spell checkers have separate support for medical dictionaries to help prevent medical errors. == Functionality == The first spell checkers were "verifiers" instead of "correctors." They offered no suggestions for incorrectly spelled words. This was helpful for typos but it was not so helpful for logical or phonetic errors. The challenge the developers faced was the difficulty in offering useful suggestions for misspelled words. This requires reducing words to a skeletal form and applying pattern-matching algorithms. It might seem logical that where spell-checking dictionaries are concerned, "the bigger, the better," so that correct words are not marked as incorrect. In practice, however, an optimal size for English appears to be around 90,000 entries. If there are more than this, incorrectly spelled words may be skipped because they are mistaken for others. For example, a linguist might determine on the basis of corpus linguistics that the word baht is more frequently a misspelling of bath or bat than a reference to the Thai currency. Hence, it would typically be more useful if a few people who write about Thai currency were slightly inconvenienced than if the spelling errors of the many more people who discuss baths were overlooked. The first MS-DOS spell checkers were mostly used in proofing mode from within word processing packages. After preparing a document, a user scanned the text looking for misspellings. Later, however, batch processing was offered in such packages as Oracle's short-lived CoAuthor and allowed a user to view the results after a document was processed and correct only the words that were known to be wrong. When memory and processing power became abundant, spell checking was performed in the background in an interactive way, such as has been the case with the Sector Software produced Spellbound program released in 1987 and Microsoft Word since Word 95. Spell checkers became increasingly sophisticated; now capable of recognizing grammatical errors. However, even at their best, they rarely catch all the errors in a text (such as homophone errors) and will flag neologisms and foreign words as misspellings. Nonetheless, spell checkers can be considered as a type of foreign language writing aid that non-native language lea

  Read more →
• 

  Living lab

  The concept of the living lab has been defined in multiple ways. A definition from the European Network of Living Labs (ENoLL) is used most widely, describing them as "user-centred open innovation ecosystems” that integrate research and innovation through co-creation in real-world environments.[1] Emerging at the intersection of ambient intelligence research and user experience methodologies in the late 1990s, the concept was pioneered at the Massachusetts Institute of Technology (MIT) as a way to study human interaction with new technologies in natural settings. Over time, living labs have evolved beyond their origins as controlled research environments, becoming dynamic platforms for participatory design, collaborative experimentation, and iterative innovation across various domains, including urban development, healthcare, sustainability, and digital technology. Characterized by principles such as real-world experimentation, active user involvement, and multi-stakeholder collaboration, living labs enable the continuous adaptation and validation of solutions in everyday contexts. Today, they are implemented globally, supported by networks like the European Network of Living Labs (ENoLL), and increasingly recognized as vital tools for addressing local and global transformation agendas. == Background == The term "living lab" has emerged in parallel from the ambient intelligence (AmI) research communities context and from the discussion on experience and application research (EAR). The emergence of the term is based on the concept of user experience and ambient intelligence. The term dates back to the late 1990s when Professor William J. Mitchell, Kent Larson, and Alex (Sandy) Pentland at the Massachusetts Institute of Technology were credited with first exploring the concept of a living laboratory. It was first associated with MIT's Media Lab as a concept for studying real-life contexts, where they described a living lab as a controlled environment designed to test new information and communication technology (ICT) innovations in a simulated home setting. This was also when some of the key characteristics often assigned to living labs today began to take shape. They argued that a living lab represents a user-centric research methodology for sensing, prototyping, validating and refining complex solutions in multiple and evolving real-life contexts. Research on living labs has expanded since the 1990s, especially in the 2010s, with growing interest in co-creation and participatory design. Particularly in Europe, the living lab evolved into a model that focused on studying user interactions with technology in real-world environments. This shift was influenced by earlier experiences in participatory design and social experiments with ICT. As interest grew, the term began to encompass a broader array of initiatives and projects, leading to variations in its interpretation and implementation. Today, living labs are used in various fields, such as technology, healthcare, and urban sustainability, showing a transition from a narrow focus on their role as controlled environments to a more wide-ranging understanding of collaborative innovation addressing real societal challenges, while also being referred to with various descriptions and definitions available from different sources. == Description == The ENoLL definition that refers to living labs as "user-centred open innovation ecosystems” that integrate research and innovation through co-creation in real-world environments is the most widely accepted description of living labs in academic literature. In simple terms, living labs can be described as an organization or experimental space, that can be both virtually or physically located, bringing different stakeholders from research, business, government, and citizens together to design and test solutions to be implemented in a real world environment. A common definition for the living lab term still does not exist to this day, which is due to the fact that living labs are interpreted and implemented across different contexts and can cover a wide range of activities and organizations, leading to different understandings of how living labs should function. Living labs also often operate in various territorial contexts (e.g. city, agglomeration, region, campus), and can vary in their methodological approach integrating concurrent research and innovation processes within a public-private-people partnership. Despite these variations, common characteristics include user-centricity, real-world experimentation, multi-stakeholder collaboration, and iterative innovation processes. The systematic user co-creation approach refers to integrating research and innovation processes through the co-creation, exploration, experimentation and evaluation of innovative ideas, scenarios, concepts and related technological artefacts in real life use cases. Such use cases involve user communities, not only as observed subjects but also as a source of creation. This approach allows all involved stakeholders to concurrently consider both the global performance of a product or service and its potential adoption by users. This consideration may be made at the earlier stage of research and development and through all elements of the product life-cycle, from design up to recycling. User-centred research methods, such as action research, community informatics, contextual design, user-centered design, participatory design, empathic design, emotional design, and other usability methods, already exist but fail to sufficiently empower users for co-creating into open development environments. More recently, the Web 2.0 has demonstrated the positive impact of involving user communities in new product development (NPD) such as mass collaboration projects (e.g. crowdsourcing, Wisdom of Crowds) in collectively creating new contents and applications. Real-world experimentation emphasizes conducting activities in real-life settings to ensure that the results of the projects and solutions are applicable to actual market conditions. Multi-stakeholder collaboration refers to an approach that involved various stakeholders, such as users, businesses, researchers, and government entities, working together towards a common goal. This is an important characteristics of living lab because collaboration of these diverse groups allows for exchange of ideas and perspectives, which are thought to enhance innovation processes. Iterative innovation processes involve a cyclical method of developing products or services, where stages such as research, development, testing, and implementation are revisited multiple times based on feedback and evaluation. This process allows for continuous improvement of the innovation, product, or service being developed. In particular, the ongoing involvement of the user creates feedback mechanisms that are ultimately key to successful development and implementation of products and services. A living lab is not similar to a testbed as its philosophy is to turn users, from being traditionally considered as observed subjects for testing modules against requirements, into value creation in contributing to the co-creation and exploration of emerging ideas, breakthrough scenarios, innovative concepts and related artefacts. Hence, a living lab rather constitutes an experiential environment, which could be compared to the concept of experiential learning, where users are immersed in a creative social space for designing and experiencing their own future. Living labs could also be used by policy makers and users/citizens for designing, exploring, experiencing and refining new policies and regulations in real-life scenarios for evaluating their potential impacts before their implementations. == European Network of Living Labs (ENoLL) == The European Network of Living Labs (ENoLL) is an international, non-profit, independent association of certified living labs, which popularized the living lab concept in the aim to increase user involvement in innovation. Formed in November 2006 under the guidance of the Finnish European Presidency, ENoLL is composed of a variety of stakeholders, including municipalities and research institutes, businesses, and users. Its primary role is to support the collaboration among living labs across Europe and includes many living labs focused on user-driven innovation across sectors. ENoLL focuses on facilitating knowledge exchange, joint actions and project partnerships among its historically labelled +/- 500 members, influencing EU policies, promoting living labs and enabling their implementation worldwide. ENoLL serves as a platform for linking living labs around the globe, which enables knowledge sharing and collaborative learning among diverse cultural environments. Membership to the platform is open to organizations worldwide, and ENoLL has expanded beyond Europe to include global members. ENoLL follows an application and accreditation pro

  Read more →
• 

  Storage area network

  A storage area network (SAN) or storage network is a computer network which provides access to consolidated, block-level data storage. SANs are primarily used to access data storage devices, such as disk arrays and tape libraries from servers so that the devices appear to the operating system as direct-attached storage. A SAN typically is a dedicated network of storage devices not accessible through the local area network (LAN). Although a SAN provides only block-level access, file systems built on top of SANs do provide file-level access and are known as shared-disk file systems. Newer SAN configurations enable hybrid SAN and allow traditional block storage that appears as local storage but also object storage for web services through APIs. == Storage architectures == Storage area networks (SANs) are sometimes referred to as network behind the servers and historically developed out of a centralized data storage model, but with its own data network. A SAN is, at its simplest, a dedicated network for data storage. In addition to storing data, SANs allow for the automatic backup of data, and the monitoring of the storage as well as the backup process. A SAN is a combination of hardware and software. It grew out of data-centric mainframe architectures, where clients in a network can connect to several servers that store different types of data. To scale storage capacities as the volumes of data grew, direct-attached storage (DAS) was developed, where disk arrays or just a bunch of disks (JBODs) were attached to servers. In this architecture, storage devices can be added to increase storage capacity. However, the server through which the storage devices are accessed is a single point of failure, and a large part of the LAN network bandwidth is used for accessing, storing and backing up data. To solve the single point of failure issue, a direct-attached shared storage architecture was implemented, where several servers could access the same storage device. DAS was the first network storage system and is still widely used where data storage requirements are not very high. Out of it developed the network-attached storage (NAS) architecture, where one or more dedicated file server or storage devices are made available in a LAN. Therefore, the transfer of data, particularly for backup, still takes place over the existing LAN. If more than a terabyte of data was stored at any one time, LAN bandwidth became a bottleneck. Therefore, SANs were developed, where a dedicated storage network was attached to the LAN, and terabytes of data are transferred over a dedicated high speed and bandwidth network. Within the SAN, storage devices are interconnected. Transfer of data between storage devices, such as for backup, happens behind the servers and is meant to be transparent. In a NAS architecture data is transferred using the TCP and IP protocols over Ethernet. Distinct protocols were developed for SANs, such as Fibre Channel, iSCSI, Infiniband. Therefore, SANs often have their own network and storage devices, which have to be bought, installed, and configured. This makes SANs inherently more expensive than NAS architectures. == Components == SANs have their own networking devices, such as SAN switches. To access the SAN, so-called SAN servers are used, which in turn connect to SAN host adapters. Within the SAN, a range of data storage devices may be interconnected, such as SAN-capable disk arrays, JBODs and tape libraries. === Host layer === Servers that allow access to the SAN and its storage devices are said to form the host layer of the SAN. Such servers have host adapters, which are cards that attach to slots on the server motherboard (usually PCI slots) and run with a corresponding firmware and device driver. Through the host adapters the operating system of the server can communicate with the storage devices in the SAN. In Fibre channel deployments, a cable connects to the host adapter through the gigabit interface converter (GBIC). GBICs are also used on switches and storage devices within the SAN, and they convert digital bits into light impulses that can then be transmitted over the Fibre Channel cables. Conversely, the GBIC converts incoming light impulses back into digital bits. The predecessor of the GBIC was called gigabit link module (GLM). === Fabric layer === The fabric layer consists of SAN networking devices that include SAN switches, routers, protocol bridges, gateway devices, and cables. SAN network devices move data within the SAN, or between an initiator, such as an HBA port of a server, and a target, such as the port of a storage device. When SANs were first built, hubs were the only devices that were Fibre Channel capable, but Fibre Channel switches were developed and hubs are now rarely found in SANs. Switches have the advantage over hubs that they allow all attached devices to communicate simultaneously, as a switch provides a dedicated link to connect all its ports with one another. When SANs were first built, Fibre Channel had to be implemented over copper cables, these days multimode optical fibre cables are used in SANs. SANs are usually built with redundancy, so SAN switches are connected with redundant links. SAN switches connect the servers with the storage devices and are typically non-blocking allowing transmission of data across all attached wires at the same time. SAN switches are for redundancy purposes set up in a meshed topology. A single SAN switch can have as few as 8 ports and up to 32 ports with modular extensions. So-called director-class switches can have as many as 128 ports. In switched SANs, the Fibre Channel switched fabric protocol FC-SW-6 is used under which every device in the SAN has a hardcoded World Wide Name (WWN) address in the host bus adapter (HBA). If a device is connected to the SAN its WWN is registered in the SAN switch name server. In place of a WWN, or worldwide port name (WWPN), SAN Fibre Channel storage device vendors may also hardcode a worldwide node name (WWNN). The ports of storage devices often have a WWN starting with 5, while the bus adapters of servers start with 10 or 21. === Storage layer === The serialized Small Computer Systems Interface (SCSI) protocol is often used on top of the Fibre Channel switched fabric protocol in servers and SAN storage devices. The Internet Small Computer Systems Interface (iSCSI) over Ethernet and the Infiniband protocols may also be found implemented in SANs, but are often bridged into the Fibre Channel SAN. However, Infiniband and iSCSI storage devices, in particular, disk arrays, are available. The various storage devices in a SAN are said to form the storage layer. It can include a variety of hard disk and magnetic tape devices that store data. In SANs, disk arrays are joined through a RAID which makes a lot of hard disks look and perform like one big storage device. Every storage device, or even partition on that storage device, has a logical unit number (LUN) assigned to it. This is a unique number within the SAN. Every node in the SAN, be it a server or another storage device, can access the storage by referencing the LUN. The LUNs allow for the storage capacity of a SAN to be segmented and for the implementation of access controls. A particular server, or a group of servers, may, for example, be only given access to a particular part of the SAN storage layer, in the form of LUNs. When a storage device receives a request to read or write data, it will check its access list to establish whether the node, identified by its LUN, is allowed to access the storage area, also identified by a LUN. LUN masking is a technique whereby the host bus adapter and the SAN software of a server restrict the LUNs for which commands are accepted. In doing so LUNs that should never be accessed by the server are masked. Another method to restrict server access to particular SAN storage devices is fabric-based access control, or zoning, which is enforced by the SAN networking devices and servers. Under zoning, server access is restricted to storage devices that are in a particular SAN zone. == Network protocols == A mapping layer to other protocols is used to form a network: ATA over Ethernet (AoE), mapping of AT Attachment (ATA) over Ethernet Fibre Channel Protocol (FCP), a mapping of SCSI over Fibre Channel Fibre Channel over Ethernet (FCoE) ESCON over Fibre Channel (FICON), used by mainframe computers HyperSCSI, mapping of SCSI over Ethernet iFCP or SANoIP mapping of FCP over IP iSCSI, mapping of SCSI over TCP/IP iSCSI Extensions for RDMA (iSER), mapping of iSCSI over InfiniBand Network block device, mapping device node requests on UNIX-like systems over stream sockets like TCP/IP SCSI RDMA Protocol (SRP), another SCSI implementation for remote direct memory access (RDMA) transports Storage networks may also be built using Serial Attached SCSI (SAS) and Serial ATA (SATA) technologies. SAS evolved from SCSI direct-attached storage. SATA evolved from Para

  Read more →