AI Email Edit

AI Email Edit — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  FedRAMP

  The Federal Risk and Authorization Management Program (FedRAMP) is a United States federal government-wide compliance program that provides a standardized approach to security assessment, authorization, and continuous monitoring for cloud products and services. The US government describes FedRAMP as FISMA for the cloud. == Overview == The FedRAMP PMO mission is to promote the adoption of secure cloud services across the federal government by providing a standardized approach to security and risk assessment. Per the OMB memorandum, any cloud services that hold federal data must be FedRAMP authorized. FedRAMP prescribes the security requirements and processes that cloud service providers must follow in order for the government to use their service. There are two ways to authorize a cloud service through FedRAMP: a Joint Authorization Board (JAB) provisional authorization (P-ATO), and through individual agencies. FedRAMP provides accreditation for cloud services for the various cloud offering models which are Infrastructure as a Service (IaaS), Platform as a Service (PaaS), and Software as a Service, (SaaS). == History == In 2011, the Office of Management and Budget (OMB) released a memorandum establishing FedRAMP "to provide a cost-effective, risk-based approach for the adoption and use of cloud services to Executive departments and agencies." The General Services Administration (GSA) established the FedRAMP Program Management Office (PMO) in June 2012. Before the introduction of FedRAMP, individual federal agencies managed their own assessment methodologies following guidance set by the Federal Information Security Management Act of 2002. == Governance and applicable laws == FedRAMP is governed by different Executive Branch entities that collaborate to develop, manage, and operate the program. These entities include: The Office of Management and Budget (OMB): The governing body that issued the FedRAMP policy memo, which defines the key requirements and capabilities of the program The Joint Authorization Board (JAB): The primary governance and decision-making body for FedRAMP comprises the chief information officers (CIOs) from the Department of Homeland Security (DHS), General Services Administration (GSA), and Department of Defense (DOD) The National Institute of Standards and Technology (NIST): Advises FedRAMP on FISMA compliance requirements and assists in developing the standards for the accreditation of independent 3PAOs The Department of Homeland Security (DHS): Manages the FedRAMP continuous monitoring strategy including data feed criteria, reporting structure, threat notification coordination, and incident response The Federal Chief Information Officers (CIO) Council: Disseminates FedRAMP information to Federal CIOs and other representatives through cross-agency communications and events The FedRAMP PMO: Established within GSA and responsible for the development of the FedRAMP program, including the management of day-to-day operations There are several laws, mandates, and policies that are foundational to FedRAMP. FISMA–the Federal Information Security Modernization Act–requires that agencies authorize the information systems that they use. The US government describes FedRAMP as FISMA for the cloud. The FedRAMP Policy Memo requires federal agencies to use FedRAMP when assessing, authorizing, and continuously monitoring cloud services in order to aid agencies in the authorization process as well as save government resources and eliminate duplicative efforts. FedRAMP's security baselines are derived from NIST SP 800-53 (as revised) with a set of control enhancements that pertain to the unique security requirements of cloud computing. == Third-party assessment organizations == Third-party assessment organizations (3PAOs) play a critical role in the FedRAMP security assessment process, as they are the independent assessment organizations that verify cloud providers' security implementations and provide the overall risk posture of a cloud environment for a security authorization decision. Accredited by the American Association for Laboratory Accreditation (A2LA), these assessment organizations must demonstrate independence and the technical competence required to test security implementations and collect representative evidence. == FedRAMP Marketplace == The FedRAMP Marketplace provides a searchable, sortable database of Cloud Service Offerings (CSOs) that have achieved a FedRAMP designation. 3PAOs, accredited auditors that can perform the FedRAMP assessment, are listed within the Marketplace. The FedRAMP Marketplace is maintained by the FedRAMP Program Management Office (PMO). == Security and authorization concerns == A 2026 ProPublica investigation found that FedRAMP entered into a partnership with Microsoft despite considerable concerns about the security of its cloud technology.

  Read more →
• 

  Zero-day vulnerability

  A zero-day (also known as a 0-day) is a vulnerability or security hole in a computer system unknown to its developers or anyone capable of mitigating it. Until the vulnerability is remedied, threat actors can exploit it in a zero-day exploit, or zero-day attack. The term "zero-day" originally referred to the number of days since a new piece of software was released to the public, so "zero-day software" was obtained by hacking into a developer's computer before release. Eventually the term was applied to the vulnerabilities that allowed this hacking, and to the number of days that the vendor has had to fix them. Vendors who discover the vulnerability may create patches or advise workarounds to mitigate it, though users need to deploy that mitigation to eliminate the vulnerability in their systems. Zero-day attacks are severe threats. == Definition == Despite developers' goal of delivering a product that works entirely as intended, virtually all products contain software and hardware bugs. If a bug creates a security risk, it is called a vulnerability. Vulnerabilities vary in their ability to be exploited by malicious actors. Some are not usable at all, while others can be used to disrupt the device with a denial of service attack. The most dangerous allow the attacker to inject and run their own code, without the user being aware of it. Although the term "zero-day" initially referred to the time since the vendor had become aware of the vulnerability, zero-day vulnerabilities can also be defined as the subset of vulnerabilities for which no patch or other fix is available. A zero-day exploit is any exploit that takes advantage of such a vulnerability. == Exploits == An exploit is the delivery mechanism that takes advantage of the vulnerability to penetrate the target's systems, for such purposes as disrupting operations, installing malware, or exfiltrating data. Researchers Lillian Ablon and Andy Bogart write that "little is known about the true extent, use, benefit, and harm of zero-day exploits". Exploits based on zero-day vulnerabilities are considered more dangerous than those that take advantage of a known vulnerability. However, it is likely that most cyberattacks use known vulnerabilities, not zero-days. Governments of states are the primary users of zero-day exploits, not only because of the high cost of finding or buying vulnerabilities, but also the significant cost of writing the attack software. Nevertheless, anyone can use a vulnerability, and according to research by the RAND Corporation, "any serious attacker can always get an affordable zero-day for almost any target". Many targeted attacks and most advanced persistent threats rely on zero-day vulnerabilities. In 2017, the average time to develop an exploit from a zero-day vulnerability was estimated at 22 days. The difficulty of developing exploits has been increasing over time due to increased anti-exploitation features in popular software. === Window of vulnerability === Zero-day vulnerabilities are often classified as alive—meaning that there is no public knowledge of the vulnerability—and dead—the vulnerability has been disclosed, but not patched. If the software's maintainers are actively searching for vulnerabilities, it is a living vulnerability; such vulnerabilities in unmaintained software are called immortal. Zombie vulnerabilities can be exploited in older versions of the software but have been patched in newer versions. Even publicly known and zombie vulnerabilities are often exploitable for an extended period. Security patches can take months to develop, or may never be developed. A patch can have negative effects on the functionality of software and users may need to test the patch to confirm functionality and compatibility. Larger organizations may fail to identify and patch all dependencies, while smaller enterprises and personal users may not install patches. Research suggests that risk of cyberattack increases if the vulnerability is made publicly known or a patch is released. Cybercriminals can reverse engineer the patch to find the underlying vulnerability and develop exploits, often faster than users install the patch. According to research by RAND Corporation published in 2017, zero-day exploits remain usable for 6.9 years on average, although those purchased from a third party only remain usable for 1.4 years on average. The researchers were unable to determine if any particular platform or software (such as open-source software) had any relationship to the life expectancy of a zero-day vulnerability. Although the RAND researchers found that 5.7 percent of a stockpile of secret zero-day vulnerabilities will have been discovered by someone else within a year, another study found a higher overlap rate, as high as 10.8 percent to 21.9 percent per year. == Countermeasures == Because, by definition, there is no patch that can block a zero-day exploit, all systems employing the software or hardware with the vulnerability are at risk. This includes secure systems such as banks and governments that have all patches up to date. Security systems are designed around known vulnerabilities, and repeated exploitations of a zero-day exploit could continue undetected for an extended period of time. Although there have been many proposals for a system that is effective at detecting zero-day exploits, this remains an active area of research in 2023. Many organizations have adopted defense-in-depth tactics so that attacks are likely to require breaching multiple levels of security, which makes it more difficult to achieve. Conventional cybersecurity measures such as training and access control — including multi-factor authentication, least-privilege access, and air-gapping makes it harder to compromise systems with a zero-day exploit. Since writing perfectly secure software is impossible, some researchers argue that driving up the cost of exploits is considered a good strategy to reduce the burden of cyberattacks. == Market == Zero-day exploits can fetch millions of dollars. There are three main types of buyers: White: the vendor, or to third parties such as the Zero Day Initiative that disclose to the vendor. Often such disclosure is in exchange for a bug bounty. Not all companies respond positively to disclosures, as they can cause legal liability and operational overhead. It is not uncommon to receive cease-and-desist letters from software vendors after disclosing a vulnerability for free. Gray: the largest and most lucrative. Government or intelligence agencies buy zero-days and may use it in an attack, stockpile the vulnerability, or notify the vendor. The United States federal government is one of the largest buyers. As of 2013, the Five Eyes (United States, United Kingdom, Canada, Australia, and New Zealand) captured the plurality of the market and other significant purchasers included Russia, India, Brazil, Malaysia, Singapore, North Korea, and Iran. Middle Eastern countries were poised to become the biggest spenders. Black: organized crime, which typically prefers exploit software rather than just knowledge of a vulnerability. These users are more likely to employ "half-days" where a patch is already available. In 2015, the markets for government and crime were estimated at least ten times larger than the white market. Sellers are often hacker groups that seek out vulnerabilities in widely used software for financial reward. Some will only sell to certain buyers, while others will sell to anyone. White market sellers are more likely to be motivated by non pecuniary rewards such as recognition and intellectual challenge. Selling zero-day exploits is legal. Despite calls for more regulation, law professor Mailyn Fidler says there is little chance of an international agreement because key players such as Russia and Israel are not interested. The sellers and buyers that trade in zero-days tend to be secretive, relying on non-disclosure agreements and classified information laws to keep the exploits secret. If the vulnerability becomes known, it can be patched and its value consequently crashes. Because the market lacks transparency, it can be hard for parties to find a fair price. Sellers might not be paid if the vulnerability was disclosed before it was verified, or if the buyer declined to purchase it but used it anyway. With the proliferation of middlemen, sellers could never know to what use the exploits could be put. Buyers could not guarantee that the exploit was not sold to another party. Both buyers and sellers advertise on the dark web. Research published in 2022 based on maximum prices paid as quoted by a single exploit broker found a 44 percent annualized inflation rate in exploit pricing. Remote zero-click exploits could fetch the highest price, while those that require local access to the device are much cheaper. Vulnerabilities in widely used software are also more expensive. They estimated that around 400 to 1,500 people sold exploits to th

  Read more →
• 

  Ibotta

  Ibotta, Inc. is an American mobile technology company headquartered in Denver, Colorado. Founded in 2011, the company offers cash back rewards on various purchases through its Ibotta Performance Network and direct to consumer app. Ibotta partners with CPG (consumer packaged goods) brands and network publishers to provide these rewards. As of 2024, the company operates solely in the United States. The company's rewards-as-a-service offering, the Ibotta Performance Network, went live in 2022. In August 2019, Ibotta received a $1 billion valuation after its Series D funding, and in 2023, the company surpassed $1.5 billion cash rewards paid to over 50 million consumers since the company's founding. Ibotta became a publicly traded company in April 2024 with a listing on the New York Stock Exchange. As of September 2025, Ibotta is trading at approximately $27.13 per share, marking a 69% decline from its initial public offering price of $88 per share on April 18, 2024. == History == === Founding through early 2019 === Ibotta was founded by current CEO Bryan Leach. The company was incorporated in 2011 and the app launched to both the App Store and Google Play stores in 2012. Early investors included entrepreneur and computer scientist Jim Clark and Tom “TJ” Jermoluk, Chairman of @Home Network. In 2015, Ibotta expanded beyond item level grocery, adding the ability to get cash back on in-store retail purchases. In 2016, in-app mobile commerce began, allowing users to navigate from the Ibotta app to its partners' apps to earn cash back on purchases. In 2016 with a Series C investment, Ibotta had raised over $73 million in funding. In March of that year, Ibotta partnered with Anheuser-Busch to offer cash back for adults who purchased its products. In May, the company partnered with LiveRamp so that companies could use their CRM data to create segmented, personalized campaigns. At the time, the company had around 200 full- and part-time employees and moved from offices in Lower Downtown Denver (LoDo) to a 40,000-square-foot office in the central Denver business district. A year later, the company had to expand to a second floor as it added almost another 100 employees. In 2017, Ibotta added cash back for Uber to its app as well as cash back rewards for online and mobile purchases. In 2018, Ibotta was listed on the Inc. 5,000 list as one of the fastest growing private companies in the U.S. A year later, in January 2019, the Ibotta app had been downloaded more than 30 million times with users receiving a reported $500 million in cash back rewards. That year, Ibotta was the largest mobile company in Colorado with six million monthly active users. === August 2019 to present === In August 2019, Ibotta was valued at $1 billion, following a Series D round of funding. The round was led by Koch Disruptive Technologies, a subsidiary of Koch Industries. 2019 was also the year the company introduced Pay with Ibotta, which allowed users to complete purchases at key retailers on the Ibotta app and earn instant cash back in the process. With that new service, users were able to enter their purchase total and use a QR code to checkout and receive immediate cash back. In 2020, the company partnered with Trees for the Future to plant up to 1 million trees as part of an Earth Month campaign to raise awareness about the waste of unused paper coupons. In response to the COVID-19 pandemic, Ibotta partnered with CPG brands in their “Here to Help” campaign and together committed over $10 million in cash back to American consumers. The company added the ability to earn cash back from online grocery pick-up and delivery orders. Later that year, Ibotta started its free Thanksgiving program, providing users with 100% cash back on select groceries needed for a Thanksgiving meal. By 2022, the company had provided approximately 10 million Thanksgiving meals. In 2021, Ibotta acquired the company OctoShop (originally InStok), a shopping browser extension company. The OctoShop app enables users to compare prices across stores and set restock and price-drop alerts. In April 2022, the Ibotta Performance Network (IPN) was launched. The IPN allows brands to deliver digital offers to consumers through third party publishers. Retailers including Walmart, Dollar General and Family Dollar, food delivery services including Instacart, and convenience stores including Shell are all part of the Ibotta Performance Network. This pay-per-sales or success-based performance network reaches over 200 million consumers. On April 18, 2024, Ibotta had its initial public offering (IPO), trading on the New York Stock Exchange (NYSE) under the ticker symbol IBTA. It was the largest technology IPO in Colorado history. In October 2025, Ibotta announced a partnership with technology and analytics company Circana, integrating Circana's Household Lift measurement into Ibotta campaigns to give CPG brands an increased understanding of the impact of their promotional campaigns. On November 3, 2025, Ibotta launched LiveLift, a tool for companies to measure the return on investment of digital promotions, in order to optimize performance marketing goals. === Athletic partnerships === Ibotta became the official jersey patch partner of the New Orleans Pelicans, a professional men's basketball team in the National Basketball Association (NBA), for the 2020–2021 and 2023–2024 seasons. Ibotta became the official jersey patch partner of the 2023 NBA champion Denver Nuggets baskeetball team beginning in the 2023–2024 season. In March 2023, F1 driver Logan Sargeant, the first U.S. racer to compete in F1 since 2015, partnered with Ibotta. The Ibotta logo was displayed on Sargeant's racing helmet throughout his F1 career. In June 2023, UConn Huskies women's basketball player Paige Bueckers entered into a "name, image, and likeness" (NIL) promotional agreement with Ibotta. According to a press release by Ibotta, the company has agreements with The Brandr Group, which finds NIL opportunities for women college athletes, and the Pearpop social media marketing platform to promote Ibotta. == Legal issues == In April 2025, shareholders filed a class action lawsuit—Fortune v. Ibotta, Inc., in the U.S. District Court for the District of Colorado (Case No. 25-cv-01213)—alleging that the registration statement in connection with Ibotta’s April 2024 initial public offering omitted material information. The complaint claims that, although Ibotta disclosed detailed terms for its contract with Walmart Inc., it failed to warn investors that its agreement with The Kroger Co., its second-largest client, was terminable at will and thus could be canceled without warning, creating a misleading impression of stability.

  Read more →
• 

  Scenery generator

  A scenery generator (or terrain generator) is a software used to create landscape images, 3D models, and animations. These programs often use procedural generation to generate the landscapes, or sometimes created and rendered by a 3D artist. These programs are often used in video games or movies. Basic elements of landscapes created by scenery generators include terrain, water, foliage, and clouds. The process for basic random generation uses a diamond square algorithm. == Common features == Most scenery generators can create basic heightmaps to simulate the variation of elevation in basic terrain. Common techniques include Simplex noise, fractals, or the diamond-square algorithm, which can generate 2-dimensional heightmaps. A version of scenery generator can be very simplistic. Using a diamond-square algorithm with some extra steps involving fractals, an algorithm for random generation of terrain can be made with only 120 lines of code. The program in example takes a grid and then divides the grid repeatedly. Each smaller grid is then split into squares and diamonds and the algorithm then makes the randomized terrain for each square and diamond. Most programs for creating landscapes also allow for adjustment and editing of the landscape. For example, World Creator allows for terrain sculpting, which uses a similar brush system as Photoshop, and allows for additional terrain enhancement with its procedural techniques such as erosion, sediments, and more. Other tools in the World Creator program include terrain stamping, which allows you to import elevation maps and use them as a base. The programs tend to also allow for additional placement of rocks, trees, etc. These can be done procedurally or by hand depending on the program. Typically the models used for the placement objects are the same as to lessen the amount of work that would be done if the user was to create a multitude of different trees. The terrain generated the computer does a generation of multifractals then integrates them until finally rendering them onto the screen. These techniques are typically done “on-the-fly” which typically for a 128 × 128 resolution terrain would mean 1.5 seconds on a CPU from the early 1990s. == Applications == Scenery generators are commonly used in movies, animations, 3D rendering, and video games. For example, Industrial Light & Magic used E-on Vue to create the fictional environments for Pirates of the Caribbean: Dead Man's Chest. In such live-action cases, a 3D model of the generated environment is rendered and blended with live-action footage. Scenery generated by the software may also be used to create completely computer-generated scenes. In the case of animated movies such as Kung Fu Panda, the raw generation is assisted by hand-painting to accentuate subtle details. Environmental elements not commonly associated with landscapes, such as ocean waves, have also been handled by the software. Scenery generation is used in most 3D based video-games. These typically use either custom or purchased engines that contain their own scenery generators. For some games they tend to use a procedurally generated terrain. These typically use a form of height mapping and use of Perlin noise. This will create a grid that with one point in a 2D coordinate will create the same heightmap as it is pseudorandom, meaning it will result in the same output with the same input. This can then easily be translated into the product 3D image. These can then be changed from the editor tools in most engines if the terrain will be custom built. With recent developments neural networks can be built to create or texture the terrain based on previously suggested artwork or heightmap data. These would be generated using algorithms that have been able to identify images and similarities between them. With the info the machine can take other heightmaps and render a very similar looking image to the style image. This can be used to create similar images in example a Studio Ghibli or Van Gogh art-style. == Software == Most game engines, whether custom or proprietary, will have terrain generation built in. Some terrain generator programs include, Terragen, which can create terrain, water, atmosphere and lighting; L3DT, which provides similar functions to Terragen, and has a 2048 × 2048 resolution limit; and World Creator, which can create terrain, and is fully GPU powered. === List of 3D terrain generation software ===

  Read more →
• 

  DevOps toolchain

  A DevOps toolchain is a set or combination of tools that aid in the delivery, development, and management of software applications throughout the systems development life cycle, as coordinated by an organization that uses DevOps practices. Generally, DevOps tools fit into one or more activities, which supports specific DevOps initiatives: Plan, Create, Verify, Package, Release, Configure, Monitor, and Version Control. == Toolchains == In software, a toolchain is the set of programming tools that is used to perform a complex software development task or to create a software product, which is typically another computer program or a set of related programs. In general, the tools forming a toolchain are executed consecutively so the output or resulting environment state of each tool becomes the input or starting environment for the next one, but the term is also used when referring to a set of related tools that are not necessarily executed consecutively. As DevOps is a set of practices that emphasizes the collaboration and communication of both software developers and other information technology (IT) professionals, while automating the process of software delivery and infrastructure changes, its implementation can include the definition of the series of tools used at various stages of the lifecycle; because DevOps is a cultural shift and collaboration between development and operations, there is no one product that can be considered a single DevOps tool. Instead a collection of tools, potentially from a variety of vendors, are used in one or more stages of the lifecycle. == Stages of DevOps == === Plan === Plan consists of two elements: "define" and "plan". This activity refers to the business value and application requirements. Specifically "Plan" activities include: Production metrics, objects and feedback Requirements Business metrics Update release metrics Release plan, timing and business case Security policy and requirement A combination of the IT personnel will be involved in these activities: business application owners, software development, software architects, continual release management, security officers and the organization responsible for managing the production of IT infrastructure. === Create === Create consists of the building, coding, and configuring of the software development process. The specific activities are: Design of the software and configuration Coding including code quality and performance Software build and build performance Release candidate Tools and vendors in this category often overlap with other categories. Because DevOps is about breaking down silos, this is reflective in the activities and product solutions. === Verify === Verify is directly associated with ensuring the quality of the software release; activities designed to ensure code quality is maintained and the highest quality is deployed to production. The main activities in this are: Acceptance testing Regression testing Security and vulnerability analysis Performance Configuration testing Solutions for verify-related activities generally fall under four main categories: Test automation, Static analysis, Test Lab, and Security. === Package === Package refers to the activities involved once the release is ready for deployment, often also referred to as staging or Preproduction / "preprod". This often includes tasks and activities such as: Approval/preapprovals Package configuration Triggered releases Release staging and holding === Release === Release related activities include schedule, orchestration, provisioning and deploying software into production and targeted environment. The specific Release activities include: Release coordination Deploying and promoting applications Fallbacks and recovery Scheduled/timed releases Solutions that cover this aspect of the toolchain include application release automation, deployment automation and release management. === Configure === Configure activities fall under the operation side of DevOps. Once software is deployed, there may be additional IT infrastructure provisioning and configuration activities required. Specific activities including: Infrastructure storage, database and network provisioning and configuring Application provision and configuration. The main types of solutions that facilitate these activities are continuous configuration automation, configuration management, and infrastructure as code tools. === Monitor === Monitoring is an important link in a DevOps toolchain. It allows IT organization to identify specific issues of specific releases and to understand the impact on end-users. A summary of Monitor related activities are: Performance of IT infrastructure End-user response and experience Production metrics and statistics Information from monitoring activities often impacts Plan activities required for changes and for new release cycles. === Version Control === Version Control is an important link in a DevOps toolchain and a component of software configuration management. Version Control is the management of changes to documents, computer programs, large web sites, and other collections of information. A summary of Version Control related activities are: Non-linear development Distributed development Compatibility with existent systems and protocols Toolkit-based design Information from Version Control often supports Release activities required for changes and for new release cycles.

  Read more →
• 

  Trigger list

  Trigger list in its most general meaning refers to a list whose items are used to initiate ("trigger") certain actions. == United States: Private financial information == In the United States, when a person applies for a mortgage loan, the lender makes a credit inquiry about the potential borrower from the national credit bureaus, Equifax, Experian and TransUnion. Unless the borrower is opted out, the credit bureaus put the applicants onto a "trigger list" of "leads" about persons who are interested in new loans. These lists are sold to numerous lenders all over the United States, and soon after the application the applicant starts receiving offers from all parts of the country. The trigger lists contain a significant amount of personal financial information. Among the buyers of trigger lists are "lead generators" which resell filtered information to borrowers, e.g., of people who live in a certain area and have a certain credit score. While the Federal Trade Commission considers the market of "trigger lists" to be a legal business, many people and organizations (such as the National Association of Mortgage Brokers) consider this a serious breach of privacy and lobby for putting this practice under regulatory controls. As of now, American consumers may opt-out from "trigger lists" by calling 1-888-5-OPTOUT (1-888-567-8688). == Nuclear non-proliferation == The Zangger Committee and the Nuclear Suppliers Group maintain lists of items that may contribute to nuclear proliferation; The nuclear non-proliferation treaty forbids its members to export such items to non-treaty members. these items are said to trigger the countries' responsibilities under the NPT, hence the name.

  Read more →
• 

  Spatiotemporal reservoir resampling

  Spatiotemporal reservoir resampling, commonly known as ReSTIR (from "Reservoir-based SpatioTemporal Importance Resampling"), is a collection of computer graphics techniques for reusing samples during rendering. It was developed primarily to allow more realistic lighting in real-time rendering, because relatively few rays can be traced per pixel while maintaining an acceptable frame rate. It can also be used to speed up off-line path tracing. The first ReSTIR paper, published in 2020, provided algorithms for direct lighting, allowing scenes containing thousands of lights to be rendered in real time on a high-end GPU. Researchers later proposed versions for rendering indirect lighting (and more recently, motion blur and depth of field) and built up a framework of mathematical concepts and notation conventions that help analyze such algorithms. A major focus of this work is removing or reducing the bias that could be introduced when samples from other pixels or frames are reused—or selectively allowing some bias in order to speed up rendering and reduce variance (visible as "noise" in the image). Versions for path tracing apply transformations called shift mappings to samples, typically reusing parts of paths closer to the light and modifying the portion closer to the camera. ReSTIR-related papers and talks have been presented every year at the SIGGRAPH conference since 2020. One of the first games to incorporate ReSTIR into its rendering was Cyberpunk 2077. == Overview and motivation == According to Chris Wyman, one of the co-authors of the original paper, although developers commonly thought that bias was acceptable for real-time rendering, end users (e.g. gamers) are well-aware of the artifacts caused by bias and many have a negative opinion of common sample-reuse techniques such as temporal anti-aliasing (TAA), which may cause "ghosting" when the camera moves, and denoising, which causes blurring and other artifacts. ReSTIR techniques can reduce or avoid these types of bias by reusing samples of the set of possible paths taken by light to reach the camera, instead of reusing rendered pixel color values (which are typically the average of multiple samples, discarding information such as the direction of the light). While other techniques reuse samples in a generic post-processing step, ReSTIR passes can test for shadowing, and reused samples are converted into pixel color values by rendering code that takes the characteristics of different materials into account (e.g. by implementing BRDFs). However the output of ReSTIR is noisy, and a denoising pass is typically still used. Stochastic ray tracing techniques such as path tracing need to average multiple samples (produced by tracing individual rays) in order to render a visually acceptable image. When using a simple unbiased renderer based on Monte Carlo integration, halving the deviation of the result (apparent as "noise" in the image) requires multiplying the number of samples by four, meaning that a rapidly increasingly number of samples is needed to improve quality, Standard ways to mitigate this problem include importance sampling (which requires finding improved sampling distributions for specific situations), and quasi-Monte Carlo integration (which usually still requires tracing a large number of rays). ReSTIR offers a solution that multiplies the effective number of samples while tracing a fixed number of additional rays per frame. Temporal reuse multiplies the effective sample count by the number of frames rendered. Spatial reuse multiplies the effective count by the number of neighboring pixels examined. These two types of reuse can be combined, allowing spatial reuse to be applied recursively, which appears to offer an exponentially increasing effective sample count, however this is quickly limited by the size of the neighborhood used for spatial reuse. Spatial reuse is also potentially less effective near shadow and object edges, especially for objects with fine geometric detail, and temporal reuse is limited by movement of the camera and scene elements. == Variations == Many variations of ReSTIR have been proposed that generalize or improve the original technique (which builds on an earlier method called RIS), specialize it for particular types of illumination or other visual effects, or allow incorporation into rendering algorithms other than standard path tracing. Some published versions are listed below. == Algorithms == === Basic algorithm === ReSTIR uses a combination of resampled importance sampling (RIS) and weighted reservoir sampling (WRS) which the authors call streaming RIS. RIS processes samples from an initial probability distribution (e.g. a probability distribution for which a cheap sampling method exists) and generates samples in a new probability distribution (e.g. a sampling distribution that is optimal for rendering but is impractical to draw samples from directly). WRS allows this to be done while storing only a small number of samples in memory, which is especially helpful on a GPU. Information about the samples is stored in a data structure called a reservoir. WRS also allows samples from multiple reservoirs to be combined ("merged") into a single reservoir; this is crucial for sample reuse. Each pixel has a reservoir, typically containing only a single sample when ReSTIR is used for real-time rendering (some implementations use a larger number, e.g. four samples). The reservoir is typically initialized to a sample drawn using a simple method and is then updated by RIS steps and by reservoir merging, so that the pixel value produced by shading using the sample(s) currently in the reservoir, times the weight for the sample, is always an unbiased estimate of the correct pixel value. If appropriate resampling steps are used, the variance of this estimate (or some function of it, typically the luminance of the RGB color value) decreases with each step. A possible sequence of steps performed for each frame, suitable for computing unbiased direct illumination (DI) is: Perform reservoir resampling by drawing multiple light samples and using streaming RIS to choose one, using probabilities based on a target function, e.g. the luminance of the sample's contribution to the pixel. A weight is also computed for the sample. Typically, a single visibility check is performed here, after choosing a sample, setting the weight to 0 if the light is shadowed. Resampling (combined with the visibility check) ensures that the expected value of the weight times the sample brightness is the correct (unbiased) value for the pixel. (temporal reuse) For each pixel, merge the sample(s) from the previous frame into the current reservoir. Multiple importance sampling (MIS) weights are used to avoid bias due to the fact that the samples in the previous frame's reservoirs may have a different target probability distribution if the objects, lights, or camera have moved. (spatial reuse) For each pixel, choose one or more neighboring pixels and merge their samples into the current pixel's reservoir. Multiple importance sampling (MIS) weights are used to avoid bias due to the fact that the samples in each pixel's reservoir have a different target probability distribution. Because computing unbiased MIS weights requires tracing additional rays (along with other work such as evaluating BRDFs), real-time rendering often uses only a single neighboring pixel. Use the sample in each pixel's reservoir, along with its weight, to determine the color of the pixel for the current frame. Alternatively, multiple samples examined during the preceding steps may be averaged and used to shade the pixel instead (decoupled shading and sampling). For direct lighting, the initial samples used in step 1 are typically drawn by importance sampling from the set of lights in a scene. The algorithm above (from the original ReSTIR paper) draws many lower-quality light samples (e.g. 32) using a fast method, without considering visibility, and chooses one using streaming RIS. Visibility is then tested for the final chosen sample. Considering visibility for each sample drawn would require tracing 32 rays, which would make it much more expensive. The intent is to reduce the number of rays traced, relying on the sample reuse in steps 2 and 3 to make up for the loss of quality caused by rejecting many of the rays due to shadowing. A large part of the initial efforts to optimize ReSTIR (to make it run in real-time on available hardware) went into reducing the cost of randomly sampling the lights. Glossy surfaces may require a larger number of samples, and combining light sampling with BRDF sampling (using MIS) may increase quality. Step 2 (temporal reuse) is sometimes skipped for off-line rendering, and the output of multiple repetitions of initial sampling and spatial reuse is averaged instead; this helps avoids artifacts due to correlations. Step 3 (spatial reuse) may be repeated multiple times in a single frame.

  Read more →
• 

  Sanchar Saathi

  Sanchar Saathi (lit. 'Communication Partner' or 'Communication Companion') is an Indian state-owned app and web portal, operated by the Department of Telecommunications, designed to assist Indian mobile users in tracking and blocking stolen or lost mobile devices. In late 2025, a government order requiring Sanchar Saathi to be pre-installed on all mobile devices sold nationwide, with explicit provisions on preventing users from deleting the app or disabling any of its broad functionalities, triggered widespread backlash. The order was subsequently withdrawn. == Background == The Telecommunications Act 2023 introduced an exceptionally broad definition of the term "telecommunications" and conferred wide-ranging powers on the government. Although the Department of Telecommunications (DoT) assured reporters that this definition would not be used to justify government overreach, a November 2024 amendment to the Telecom Cyber Security Rules expanded it further and introduced the concept of the Telecommunication Identifier User Entity (TIEU), enabling users to be personally identified through their phone numbers. Sanchar Saathi was launched amid a widespread rise in cybercrime and hacking, as part of the Indian government's effort to prevent stolen phones from being used for fraud and to promote a state-backed application. In an official statement, the DoT said, "India has big second-hand mobile device market. Cases have also been observed where stolen or blacklisted devices are being re-sold. It makes the purchaser abettor in crime and causes financial loss to them." == Launch == Sanchar Saathi was originally launched as a web portal in May 2023. It was later launched as a mobile app in January 2025. Describing itself as a "citizen-centric" safety tool, Sanchar Saathi allows users to check a device's IMEI, report and block lost or stolen phones, and flag suspected fraud communications. Under Sanchar Saathi's privacy policy, it can make and manage phone calls, view and send messages, read call logs, access photos and files, access the location and camera of the device in which the app is used, as well as read and write into the device's storage. According to official government data, by December 2025, the Sanchar Saathi app had helped recover more than 700,000 lost and stolen mobile devices across India. Users report around 2,000 fraud incidents through the app each day. == Pre-installation controversy == On 28 November 2025, the Bharatiya Janata Party government, led by prime minister Narendra Modi, privately ordered phone manufacturers, including Apple, Samsung, Xiaomi, Vivo, Oppo, among others, to pre-install the Sanchar Saathi app on new devices sold in the country, alongside mandating that old devices get issued a software update for the installation of the app. The order had a 90-day deadline and further included explicit provisions to ensure that the app is to be "readily visible and accessible to the end users at the time of first use or device setup" and that users should neither be able to delete the app nor disable or restrict any of its broad functionalities. The order caused widespread political backlash. K. C. Venugopal, a general secretary of the main opposition party, the Indian National Congress (or simply the Congress), called the order "beyond unconstitutional" and said, "A pre-loaded government app that cannot be uninstalled is a dystopian tool to monitor every Indian. It is a means to watch over every movement, interaction and decision of each citizen", adding, "Big Brother cannot watch us." Another Congress general secretary, Priyanka Gandhi, termed Sanchar Saathi a "snooping app", and attacked the government for "turning this country into a dictatorship". Uddhav Thackeray, former chief minister of Maharashtra, compared Sanchar Saathi to the Pegasus spyware. Sanjay Hegde, a senior advocate at the Supreme Court of India, said "Here in the garb of security, the intrusion is vast, unfettered, unguided and is totally disproportionate. The app ought to be struck down on that account". The Internet Freedom Foundation (IFF), an Indian digital rights advocacy organisation, said, "Forcing every smartphone to carry a permanent government app for a simple verification task is excessive and violates the Puttaswamy proportionality standard", referring to Puttaswamy v. Union of India, a 2017 landmark decision of the Supreme Court, which asserted that the right to privacy should be protected as a fundamental right. The IFF further said, "For this to work in practice, the app will almost certainly need system level or root level access, similar to carrier or OEM system apps, so that it cannot be disabled. That design choice erodes the protections that normally prevent one app from peering into the data of others, and turns Sanchar Saathi into a permanent, non-consensual point of access sitting inside the operating system of every Indian smartphone user." Moreover, the organisation said that while the app was being "framed as a benign IMEI checker", a server-side update could allow the app to engage in "client side scanning for 'banned' applications, flag VPN usage, correlate SIM activity, or trawl SMS logs in the name of fraud detection. Nothing in the order constrains these possibilities." In reaction to the controversy, Jyotiraditya Scindia, the union minister of communications, said, "There is no snooping or call monitoring", adding, "Obviously you can delete it. There is no problem. This is a matter of customer protection. It is not mandatory. If you don't want to register, and don't want to use the app, don't use it; don't register, and it will lay dormant." Scindia compared the app to other pre-installed mobile apps such as Google Maps, which he said could be deleted if users wished so. However, contrary to Scindia's statement, on many phone brands, such pre-installed apps cannot be deleted, although users can disable them. Furthermore, upon enquiry, Scindia did not clarify whether his remarks applied to the app after the order took effect, making no comment on the provision in the order that would prevent users from deleting the app. When Congress member Renuka Chowdhury submitted an adjournment motion notice in the Rajya Sabha seeking the suspension of all other matters to discuss the Sanchar Saathi issue, Kiren Rijiju, the union minister of parliamentary affairs, accused the opposition of "manufacturing issues" to stall session proceedings. By 2 December, it had been reported that Apple did not plan to comply with the order, citing privacy and security concerns for the iOS ecosystem and the fact that the order would violate its internal policy against the pre-installation of third-party software in iPhones. Although it was clarified that Apple did not intend to take the matter to court or publicly oppose the government, it was said that Apple "can't do this. Period." The order would have also required Google to create a custom version of Android solely for India which would include the Sanchar Saathi app, a requirement described to "not be acceptable to the company". Following the backlash, the order was revoked on 3 December 2025. In a press release, the government said, "Given Sanchar Saathi's increasing acceptance, Government has decided not to make the pre-installation mandatory for mobile manufacturers".

  Read more →
• 

  Digital Michelangelo Project

  The Digital Michelangelo Project was a pioneering initiative undertaken during the 1998–1999 academic year to digitize the sculptures and architecture of Michelangelo using advanced laser scanning technology. The project was led by a team of 30 faculty, staff, and students from Stanford University and the University of Washington, with the aim of creating high-resolution 3D models of Michelangelo's works for scholarly, educational, and preservation purposes. == Objectives == The primary goals of the Digital Michelangelo Project were: To apply recent advancements in laser rangefinder technology for digitizing large cultural artifacts. To create detailed digital archives of Michelangelo's sculptures and architectural spaces for future study and analysis. To explore potential educational and curatorial applications for 3D scanned data. === Artworks digitized === The project involved scanning several iconic works by Michelangelo, including: David The Unfinished Slaves (Atlas, Awakening, Bearded, and Youthful) St. Matthew The allegorical statues from the Medici tombs (Night, Day, Dawn, and Dusk) The architectural interiors of the Tribuna del David at the Galleria dell'Accademia and the New Sacristy in the Medici Chapels. == Technology and methodology == === 3D scanning === The project's primary scanner was a laser triangulation rangefinder mounted on a motorized gantry, custom-built by Cyberware Inc. The scanner used a laser sheet to project onto an object, capturing its shape through triangulation. Multiple scans were taken from various angles and combined into a single, detailed 3D mesh. The resolution achieved was fine enough to capture even Michelangelo's chisel marks, with triangles approximately 0.25 mm on each side. In addition to shape data, color data was captured using a spotlight and a secondary camera, enabling the creation of textured 3D models. === Data processing === The project developed a software suite for processing the scanned data. This included: Aligning and merging multiple scans into a seamless 3D model. Filling holes in the geometry caused by inaccessible areas. Correcting color data for lighting inconsistencies and shadowing. Non-photorealistic rendering techniques were also applied, highlighting surface features such as Michelangelo’s chisel marks for enhanced visualization. == Logistical challenges == The scale and complexity of the project presented several challenges: Data size: The dataset for David alone comprised 2 billion polygons and 7,000 color images, occupying 60 GB of storage. Artifact safety: Ensuring the safety of the statues during scanning required extensive crew training, foam-encased equipment, and collision-prevention mechanisms. == Applications and impact == The digitized models have numerous potential applications: Art history: Allowing precise measurements and geometric analysis, such as determining chisel types or evaluating structural balance. Education: Providing new ways to study art, including interactive viewing from unconventional angles and with custom lighting. Museum curation: Enhancing visitor experiences through interactive kiosks and virtual models. The project demonstrated the potential for 3D technology to preserve and disseminate cultural heritage. == Data distribution == The project's models are available through Stanford University for scholarly purposes, under strict licensing due to Italian intellectual property laws. === ScanView === To provide public access to the 3D models while respecting usage restrictions, the project developed ScanView, a client/server rendering system. ScanView allows users to view and interact with high-resolution 3D models without downloading the data. The client component consists of a freely available viewer program and simplified 3D models. Users can navigate these models locally, adjusting position, orientation, lighting, and surface appearance. When a user finalizes a view, the client queries a remote server for a high-resolution rendering of the model, which is sent back to overwrite the simplified version on the user’s screen. A typical query-response cycle takes 1–2 seconds, depending on network conditions. To protect the models from unauthorized reconstruction, the system employs several security measures, including: Encrypting queries Perturbing viewpoint and lighting parameters Adding noise and warping rendered images Compressing images before transmission ScanView operates on Windows-based PCs and provides access to selected models, including David and St. Matthew, as well as other artifacts such as fragments of the Forma Urbis Romae and items from the Stanford 3D Scanning Repository. == Sponsors == The Digital Michelangelo Project was supported by Stanford University, Interval Research Corporation, and the Paul G. Allen Foundation for the Arts.

  Read more →
• 

  Intrapixel and Interpixel processing

  Intrapixel and Interpixel processing is used in the processing of computers graphics, as well as sensors and images in equipment such as cameras. For computer graphics, CMOS sensor processing is done in pixel level. This process includes two general categories: intrapixel processing, where the processing is performed on the individual pixel signals, and interpixel processing, where the processing is performed locally or globally on signals from several pixels. The purpose of interpixel processing is to perform early vision processing, not merely to capture images. Intrapixel and Interpixel processing is an integral part of spatial processing within the earth Mixed Spatial Attraction Model. This also includes use within hyperspectral image processing.

  Read more →
• 

  Cybersecurity in space

  Cybersecurity in space involves the defense of all space assets (e.g. navigation systems, satellites, ground antennas, networks, etc.). The security of space can be affected by attacks such as disruption, corruption as well as the destruction of depended-upon assets/collected data. Government (e.g. militaries) and non-government sectors (e.g. financial industries) have started to become more reliant on numerous space-based services. Due to the criticality of these services, space security experts have identified these assets as high-value targets (HVT) that can cause detrimental consequences to all of Earth. == Scope and definitions == Space assets are broken down by three sub-sectors: the space component, the ground component, and the individual user component. The architecture of space assets is extremely complex and allows for a frequent attack vector utilized, the disruption by radio frequency (RF) cyber-attacks. In 2020, a memorandum was published by President Donald Trump, Space Policy Directive‑5 (SPD‑5). It established principles to ensure the safeguarding of all space assets. In 2023, the National Institute of Standards and Technology’s (NIST) published IR 8270, Introduction to Cybersecurity for Commercial Satellite Operations. This report established a baseline risk-management framework (RMF) to be implemented into space operations. == History == During the Cold War in the 1950s-1960s, the United States and Russia entered what was called the “Space Race”. By 1957, the Soviet Union successfully launched the first satellite into space named Sputnik. By 1961, the first key milestone was accomplished when the Soviet Union’s Yuri Gagarin became the first human to orbit Earth. This was later followed by the first American, Alan Shepard, to be launched into space; this was followed by John Glenn becoming the first American to orbit Earth in 1962. In 1969, a pinnacle milestone was reached when Apollo 11 launched into space and Neil Armstrong became the first man to walk on the moon. As space operations furthered, Commercial off-the-shelf products became increasingly popular but resulted in a rapid increase to the cyber-attack surface. Public awareness of space security did not increase until 2022, when the Viasat KA-SAT incident occurred, resulting in the disruption of a large number of modems across Europe. The attack was later accredited to Russia by the U.S. and the U.K. Policy and standards started to rapidly increase by 2020. The establishment of SPD-5 was released in 2020 followed by asset hardening instructions in 2022, and NIST’s IR 8270 in 2023. It was not until 2025 that Europe published their own findings in the Space Threat Landscape 2025 Report. This document led to the EU’s security proposals and standards. == Threats == === Radio-frequency Interference and Global Navigation Satellite Systems (GNSS) Spoofing === Space services are highly dependent on RF links for systems such as GNSS, however, a consequence of this dependency on RF is denial of service and deception. In 2017, the Black Sea maritime event occurred when numerous ships were subject to spoofing. Space services depend on RF links susceptible to jamming (denial) and spoofing (deception), including for GNSS/Positioning, Navigation, and Timing (PNT). Annotated incidents include the 2017 Black Sea maritime spoofing event affecting numerous ships, and extensive aviation GNSS spoofing patterns surveyed in various regions during 2024–2025. === Network intrusion and malware === Cyber threats can intrude and infect assets with malware. They do this by finding misconfiguration vulnerabilities, remote-management interfaces, and/or supply-chain vulnerabilities mainly in ground networks and user terminals. When KA-SAT occurred, it resulted from bulk modem disturbances. Forensic analysts later suggested malicious management controls and wiper malware as the root cause. === Supply-chain and lifecycle risks === The outsource of COTS components, external vendors, and software defined payloads allowed for vulnerabilities to emerge in the System/Product Lifecycle. In response, EU recommended the implementation of lifecycle-wide controls as mitigating factors. === Espionage, disruption, and influence === As Advanced Persistent Threats (APTs), Global Positioning System (GPS) intervention, and information warfare increased, assets like transponders became more frequent targets of attack. == Noteworthy incidents == The Viasat KA‑SAT incident of 2022, where a large number of modems in Europe were disrupted, resulted in the loss of telemetry access to a significant amount of wind turbines in Germany. The mass GNSS deception of the Black Sea in 2017 affected numerous ships when they started to convey fake central locations in Russia. Between 2024 and 2025, there was a mass, repetitive aviation GNSS spoofing that affected the aircraft of various regions. == Standards, guidelines, and best practices == SPD‑5 (U.S.) – This established risk-based engineering, verifying and ensuring positive control, and the implementation of risk mitigation controls. NIST IR 8270 – This created a RMF for COTS satellites. CISA/FBI SATCOM Advisory (AA22‑076) – Provided guidance on hardening techniques such as least-privileged, access control, encryption, etc.). ENISA Space Threat Landscape 2025 – It established the categorization of assets to organize threats, ensuring the observation of system/product lifecycle, and an RMF for COTS satellites. ECSS‑E‑ST‑80C (2024) – This established a standard for securing lifecycles in space, covering all segments (e.g. ground, launch, etc.). == Regulation and governance == As of 2025, there is no international regulations established for space assets, but the U.S., EU, and ESA institutional initiatives have published standards to address security concerns. The U.S. implemented SPD-5 and the Federal Communications Commission (FCC); the FCC addressed orbital debris. While the EU created standards to address technological mandates and support the implementation of NIS2. Lastly, the ESA created a special operations center to safeguard their satellites. International governance is still evolving, but forums have been held by the United Nations Committee on the Peaceful Uses of Outer Space. International conversations under forums such as the UN Committee on the Peaceful Uses of Outer Space (COPUOS) progressively note the cyber–space safety relationship, though formal global norms specific to space cybersecurity continue evolving. == Risk management approaches == Through RMF, mitigation controls have been implemented to reduce the risk of exploitation while increasing the security of space. Controls addressing mitigation include proper configuration, system hardening, zero-trust architectures, encryption, etc. Both the government and industries have placed an emphasis on incident response procedures to identify, contain, and remediate breaches.

  Read more →
• 

  MultiValue database

  A MultiValue database is a type of NoSQL and multidimensional database. It is typically considered synonymous with PICK, a database originally developed as the Pick operating system. MultiValue databases include commercial products from Rocket Software, Revelation, InterSystems, Northgate Information Solutions, ONgroup, and other companies. These databases differ from a relational database in that they have features that support and encourage the use of attributes which can take a list of values, rather than all attributes being single-valued. They are often categorized with MUMPS within the category of post-relational databases, although the data model actually pre-dates the relational model. Unlike SQL-DBMS tools, most MultiValue databases can be accessed both with or without SQL. == History == Don Nelson designed the MultiValue data model in the early to mid-1960s. Dick Pick, a developer at TRW, worked on the first implementation of this model for the US Army in 1965. Pick considered the software to be in the public domain because it was written for the military, this was but the first dispute regarding MultiValue databases that was addressed by the courts. Ken Simms wrote DataBASIC, sometimes known as S-BASIC, in the mid-1970s. It was based on Dartmouth BASIC, but had enhanced features for data management. Simms played a lot of Star Trek (a text-based early computer game originally written in Dartmouth BASIC) while developing the language, to ensure that DataBASIC functioned to his satisfaction. Three of the implementations of MultiValue - PICK version R77, Microdata Reality 3.x, and Prime Information 1.0 - were very similar. In spite of attempts to standardize, particularly by International Spectrum and the Spectrum Manufacturers Association, who designed a logo for all to use, there are no standards across MultiValue implementations. Subsequently, these flavors diverged, although with some cross-over. These streams of MultiValue database development could be classified as one stemming from PICK R83, one from Microdata Reality, and one from Prime Information. Because of the differences, some implementations have provisions for supporting several flavors of the languages. An attempt to document the similarities and differences can be found at the Post-Relational Database Reference (PRDB). One reasonable hypothesis for this data model lasting 50 years, with new database implementations of the model even in the 21st century is that it provides inexpensive database solutions. == Data model example == In a MultiValue database system: a database or schema is called an "account" a table or collection is called a "file" a column or field is called a field or an "attribute", which is composed of "multi-value attributes" and "sub-value attributes" to store multiple values in the same attribute. a row or document is called a "record" or "item" Data is stored using two separate files: a "file" to store raw data and a "dictionary" to store the format for displaying the raw data. For example, assume there's a file (table) called "PERSON". In this file, there is an attribute called "eMailAddress". The eMailAddress field can store a variable number of email address values in a single record. The list [[email protected], [email protected], [email protected]] can be stored and accessed via a single query when accessing the associated record. Achieving the same (one-to-many) relationship within a traditional relational database system would include creating an additional table to store the variable number of email addresses associated with a single "PERSON" record. However, modern relational database systems support this multi-value data model too. For example, in PostgreSQL, a column can be an array of any base type. == MultiValue Basic Language == Multivalue Basic (now commonly styled as mvBasic) is a family of programming languages more or less common (and portable) to all the multivalue databases derived from the original Pick Operating System. The variations between implementations are known as flavours. The language originates from Dartmouth Basic and the earliest implementation of PickBASIC (now D3 FlashBasic). Over time various customisations and extensions have been added to take advantage of capabilities added to the different flavours while staying mainly in sync. mvBasic statements and functions are designed to access and take advantage of the multivalue database model and providing the usual capabilities of most modern languages. For example, cryptography and communications. mvBasic is typeless and lends itself to structured programming techniques. Example code is available but limited. Whilst there are commercial applications and tools available, the multivalue database community has not embraced the open source library/package model to the degree seen with other languages. The typical mvBasic compiler compiles program source to a P-code executable object and runs in an interpreter, with D3 FlashBasic and jBASE being notable exceptions. == MultiValue Query Language == Known as ENGLISH, ACCESS, AQL, UniQuery, Retrieve, CMQL, and by many other names over the years, corresponding to the different MultiValue implementations, the MultiValue query language differs from SQL in several respects. Each query is issued against a single dictionary within the schema, which could be understood as a virtual file or a portal to the database through which to view the data. LIST PEOPLE LAST_NAME FIRST_NAME EMAIL_ADDRESSES WITH LAST_NAME LIKE "Van..." The above statement would list all e-mail addresses for each person whose last name starts with "Van". A single entry would be output for each person, with multiple lines showing the multiple e-mail addresses (without repeating other data about the person).

  Read more →
• 

  ImageNet

  The ImageNet project is a large visual database designed for use in visual object recognition software research. More than 14 million images have been hand-annotated by the project to indicate what objects are pictured and in at least one million of the images, bounding boxes are also provided. ImageNet contains more than 20,000 categories, with a typical category, such as "balloon" or "strawberry", consisting of several hundred images. The database of annotations of third-party image URLs is freely available directly from ImageNet, though the actual images are not owned by ImageNet. Since 2010, the ImageNet project runs an annual software contest, the ImageNet Large Scale Visual Recognition Challenge (ILSVRC), where software programs compete to correctly classify and detect objects and scenes. The challenge uses a "trimmed" list of one thousand non-overlapping classes. == History == AI researcher Fei-Fei Li began working on the idea for ImageNet in 2006. At a time when most AI research focused on models and algorithms, Li wanted to expand and improve the data available to train AI algorithms. In 2007, Li met with Princeton professor Christiane Fellbaum, one of the creators of WordNet, to discuss the project. As a result of this meeting, Li went on to build ImageNet starting from the roughly 22,000 nouns of WordNet and using many of its features. She was also inspired by a 1987 estimate that the average person recognizes roughly 30,000 different kinds of objects. As an assistant professor at Princeton, Li assembled a team of researchers to work on the ImageNet project. They used Amazon Mechanical Turk to help with the classification of images. Labeling started in July 2008 and ended in April 2010. It took 49K workers from 167 countries filtering and labeling over 160M candidate images. They had enough budget to have each of the 14 million images labelled three times. The original plan called for 10,000 images per category, for 40,000 categories at 400 million images, each verified 3 times. They found that humans can classify at most 2 images/sec. At this rate, it was estimated to take 19 human-years of labor (without rest). They presented their database for the first time as a poster at the 2009 Conference on Computer Vision and Pattern Recognition (CVPR) in Florida, titled "ImageNet: A Preview of a Large-scale Hierarchical Dataset". The poster was reused at Vision Sciences Society 2009. In 2009, Alex Berg suggested adding object localization as a task. Li approached PASCAL Visual Object Classes contest in 2009 for a collaboration. It resulted in the subsequent ImageNet Large Scale Visual Recognition Challenge starting in 2010, which has 1000 classes and object localization, as compared to PASCAL VOC which had just 20 classes and 19,737 images (in 2010). === Significance for deep learning === On 30 September 2012, a convolutional neural network (CNN) called AlexNet achieved a top-5 error of 15.3% in the ImageNet 2012 Challenge, more than 10.8 percentage points lower than that of the runner-up. Using convolutional neural networks was feasible due to the use of graphics processing units (GPUs) during training, an essential ingredient of the deep learning revolution. According to The Economist, "Suddenly people started to pay attention, not just within the AI community but across the technology industry as a whole." In 2015, AlexNet was outperformed by Microsoft's very deep CNN with over 100 layers, which won the ImageNet 2015 contest, having 3.57% error on the test set. Andrej Karpathy estimated in 2014 that with concentrated effort, he could reach 5.1% error rate, and ~10 people from his lab reached ~12-13% with less effort. It was estimated that with maximal effort, a human could reach 2.4%. == Dataset == ImageNet crowdsources its annotation process. Image-level annotations indicate the presence or absence of an object class in an image, such as "there are tigers in this image" or "there are no tigers in this image". Object-level annotations provide a bounding box around the (visible part of the) indicated object. ImageNet uses a variant of the broad WordNet schema to categorize objects, augmented with 120 categories of dog breeds to showcase fine-grained classification. In 2012, ImageNet was the world's largest academic user of Mechanical Turk. The average worker identified 50 images per minute. The original plan of the full ImageNet would have roughly 50M clean, diverse and full resolution images spread over approximately 50K synsets. This was not achieved. The summary statistics given on April 30, 2010: Total number of non-empty synsets: 21841 Total number of images: 14,197,122 Number of images with bounding box annotations: 1,034,908 Number of synsets with SIFT features: 1000 Number of images with SIFT features: 1.2 million === Categories === The categories of ImageNet were filtered from the WordNet concepts. Each concept, since it can contain multiple synonyms (for example, "kitty" and "young cat"), so each concept is called a "synonym set" or "synset". There were more than 100,000 synsets in WordNet 3.0, majority of them are nouns (80,000+). The ImageNet dataset filtered these to 21,841 synsets that are countable nouns that can be visually illustrated. Each synset in WordNet 3.0 has a "WordNet ID" (wnid), which is a concatenation of part of speech and an "offset" (a unique identifying number). Every wnid starts with "n" because ImageNet only includes nouns. For example, the wnid of synset "dog, domestic dog, Canis familiaris" is "n02084071". The categories in ImageNet fall into 9 levels, from level 1 (such as "mammal") to level 9 (such as "German shepherd"). === Image format === The images were scraped from online image search (Google, Picsearch, MSN, Yahoo, Flickr, etc) using synonyms in multiple languages. For example: German shepherd, German police dog, German shepherd dog, Alsatian, ovejero alemán, pastore tedesco, 德国牧羊犬. ImageNet consists of images in RGB format with varying resolutions. For example, in ImageNet 2012, "fish" category, the resolution ranges from 4288 x 2848 to 75 x 56. In machine learning, these are typically preprocessed into a standard constant resolution, and whitened, before further processing by neural networks. For example, in PyTorch, ImageNet images are by default normalized by dividing the pixel values so that they fall between 0 and 1, then subtracting by [0.485, 0.456, 0.406], then dividing by [0.229, 0.224, 0.225]. These are the mean and standard deviations for ImageNet, so this whitens the input data. === Labels and annotations === Each image is labelled with exactly one wnid. Dense SIFT features (raw SIFT descriptors, quantized codewords, and coordinates of each descriptor/codeword) for ImageNet-1K were available for download, designed for bag of visual words. The bounding boxes of objects were available for about 3000 popular synsets with on average 150 images in each synset. Furthermore, some images have attributes. They released 25 attributes for ~400 popular synsets: Color: black, blue, brown, gray, green, orange, pink, red, violet, white, yellow Pattern: spotted, striped Shape: long, round, rectangular, square Texture: furry, smooth, rough, shiny, metallic, vegetation, wooden, wet === ImageNet-21K === The full original dataset is referred to as ImageNet-21K. ImageNet-21k contains 14,197,122 images divided into 21,841 classes. Some papers round this up and name it ImageNet-22k. The full ImageNet-21k was released in Fall of 2011, as fall11_whole.tar. There is no official train-validation-test split for ImageNet-21k. Some classes contain only 1-10 samples, while others contain thousands. === ImageNet-1K === There are various subsets of the ImageNet dataset used in various context, sometimes referred to as "versions". One of the most highly used subsets of ImageNet is the "ImageNet Large Scale Visual Recognition Challenge (ILSVRC) 2012–2017 image classification and localization dataset". This is also referred to in the research literature as ImageNet-1K or ILSVRC2017, reflecting the original ILSVRC challenge that involved 1,000 classes. ImageNet-1K contains 1,281,167 training images, 50,000 validation images and 100,000 test images. Each category in ImageNet-1K is a leaf category, meaning that there are no child nodes below it, unlike ImageNet-21K. For example, in ImageNet-21K, there are some images categorized as simply "mammal", whereas in ImageNet-1K, there are only images categorized as things like "German shepherd", since there are no child-words below "German shepherd". === Later developments === In the WordNet they built ImageNet on, there were 2832 synsets in the "person" subtree. During 2018--2020 period, they removed the download of the ImageNet-21k as they went through extensive filtering in these person synsets. Out of these 2832 synsets, 1593 were deemed "potentially offensive". Out of the remaining 1239, 1081 were deemed not really "visual". The result was that only 158 syn

  Read more →
• 

  Threat actor

  In cybersecurity and risk assessment, a threat actor (or threat agents, attackers, or adversaries) is a person, group, organisation, state, or other entity with the ability to cause, carry, transmit, support, or exploit a threat. Threat actors are commonly analysed according to their motivations, resources, technical capability, access to systems, relationship to a target, and degree of connection to state authority. They may exploit vulnerabilities, conduct social engineering, steal or monetise data, disrupt operations, or support other actors who carry out such activity. Because the term covers a wide range of actors, researchers and security organisations use taxonomies that distinguish between groups such as cybercriminals, state-linked actors, ideologically motivated actors, thrill seekers or trolls, insiders, and competitors. Threat actor classifications are used in risk management, cyber threat intelligence, and incident response to connect observed behaviour with possible objectives and likely future activity. The categories are not always mutually exclusive: the same actor may combine criminal, ideological, commercial, or state-linked motivations, and different organisations may use different names for similar actors. == Risk assessment and security management == In risk assessment, threat actor analysis is used to identify who or what may create, carry, transmit, support, or exploit a threat, and how that actor relates to the system being assessed. Rausand and Haugen classify threat actors by their relationship to the system, distinguishing between internal and external actors, and by intent, distinguishing between intentional and unintentional actors. Threat actor classification may also support incident investigation. Rogers argued that actor categories could be inferred from observable case points, such as tools used, messages left, data targeted, forensic knowledge, and the degree of damage, allowing investigators to assess likely motivation and skill level. Later work similarly linked actor classification to operational analysis. Chng, Lu, Kumar and Yau proposed a framework connecting hacker types, motivations and typical strategies, arguing that observed behaviour before or during an attack can help analysts infer the likely type of actor involved. At the strategic level, actor analysis may consider an actor's resources, capabilities, degree of state involvement, motivations and objectives. == Landscape == The United Nations Institute for Disarmament Research has described the contemporary cyberthreat landscape as involving an increasingly diverse and interconnected set of actors, including state-led operations, cybercriminal syndicates, ideological hacktivists, commercial cyber mercenaries, private companies and civilian volunteers. Its 2026 report argued that these actors vary in resources, technical sophistication and relationships with states, making it traditional distinctions between state, civilian combatant roles, and legitimate and illegitimate conduct harder to apply. == Academic taxonomies == Early taxonomies classified hackers by activity, skill, motivation, or criminal profile. Landreth proposed six categories based on activity: novice, student, tourist, crasher, and thief. Hollinger classified computer misuse into pirates, browsers, and crackers, describing a progression from less-skilled activity to more technically serious offences. Chantler used attributes including activity, skill, knowledge, motivation, and duration of involvement to distinguish between an elite group, neophytes, and "losers and lamers". Parker proposed seven profiles of cybercriminals: pranksters, hacksters, malicious hackers, personal problem solvers, career criminals, extreme advocates, and malcontents, addicts, and irrational or incompetent people. In 2000, Marc Rogers proposed a taxonomy of hackers with seven, non-mutually-exclusive categories: newbie/tool kit users, cyber-punks, internals, coders, old guard hackers, professional criminals, and cyber-terrorists. Rausand and Haugen distinguish between internal and external threat actors, and between intentional and unintentional threat actors. Internal actors have some relationship with, access to, or position inside the system or organisation, while external actors operate from outside it. Intentional actors seek to create, exploit, or support a threat event, whereas unintentional actors may cause or enable a threat event through error, negligence, accident, or lack of awareness. Rogers later revised his hacker taxonomy into Novices, Cyber-punks, Internals, Petty Thieves, Virus Writers, Old Guard hackers, Professional Criminals, Information Warriors, and, more tentatively, Political Activists. In the model, motivation is grouped into four broad domains: curiosity, notoriety, revenge, and financial gain. A 2022 review by Chng, Lu, Kumar and Yau examined 11 hacker typologies published over three decades and proposed a unified framework linking hacker types, motivations, and strategies. The framework identified 13 hacker types and seven motivations, and argued that observed strategies during an attack can help analysts infer the likely type of actor involved. == Government taxonomies == Taxonomies of threat actors by governments are much more likely to include state-level threat actors. In the United States the National Institute of Standards and Technology (NIST) uses the term threat source in its risk-assessment guidance: organisations are directed to identify and characterise threat sources of concern, including capability, intent and targeting for adversarial threat sources, and the range of effects for non-adversarial threat sources. NIST treats threat-source identification as part of the risk-assessment process, alongside identifying threat events, vulnerabilities, likelihood and impact. In the EU, European Union Agency for Cybersecurity publishes the annual ENISA Threat Landscape, which analyses cyber incidents and adversary behaviour affecting the European Union. The 2025 report analysed selected incidents from the previous year and grouped activity around cybercrime, state-aligned activity, foreign information manipulation and interference, and hacktivism. In ENISA's 2025 analysis, hacktivist activity dominated reporting, representing almost 80% of recorded incidents and consisting mainly of low-level distributed denial-of-service operations. ENISA also reported increasing convergence between hacktivism, cybercrime and state-nexus activity, including state-aligned use of hacktivist personas, hacktivist adoption of ransomware, and false-flag or impersonation activity. At the UN level, A 2026 report by the United Nations Institute for Disarmament Research described the cyberthreat landscape as involving state-led operations, cybercriminal syndicates, ideological hacktivists, commercial cyber mercenaries, and civilian volunteers, with actors varying in resources, technical sophistication, and links to states. Canada defines threat actors as states, groups, or individuals who aim to cause harm by exploiting a vulnerability with malicious intent. A threat actor must be trying to gain access to information systems to access or alter data, devices, systems, or networks. The Japanese government's National Centre of Incident Readiness and Strategy (NISC) was established in 2015 to create a "free, fair and secure cyberspace" in Japan. The NICS created a cybersecurity strategy in 2018 that outlines nation-states and cybercrime to be some of the most key threats. It also indicates that terrorist usage of the cyberspace needs to be monitored and understood. The Security Council of the Russian Federation published the cyber security strategy doctrine in 2016. This strategy highlights the following threat actors as a risk to cyber security measures: nation-state actors, cyber criminals, and terrorists. == Techniques == Threat actors use techniques like Social engineering (security), and Phishing, alongside technical exploits like Cross-site scripting, SQL injection, and denial-of-service attacks. == Limitations == In practice, actor categories may overlap (Edward Snowden for example), and the same activity may combine features associated with hacktivism, cybercrime and state-linked operations. The lines between hacktivism, cybercrime and state-nexus activity had continued to blur, with shared toolsets, overlapping methods, fake personas, hacktivist adoption of ransomware, and cybercriminal or state-linked actors masquerading as other groups. Threat actor analysis also has limits as a risk-management method. NIST notes that risk assessments depend on their purpose, scope, assumptions, constraints, information sources, risk model and analytic approach, and that assessments are tied to particular time frames and organisational contexts. NIST also warns that simple threat-vulnerability pairing may be undesirable or problematic where there are many threats and vulnerabilities, and recom

  Read more →
• 

  Vx-underground

  vx-underground, also known as VXUG, is an educational website about malware and cybersecurity. It claims to have the largest online repository of malware. The site was launched in May, 2019 and has grown to host over 35 million pieces of malware samples. On their account on Twitter, VXUG reports on and verifies cybersecurity breaches. == Reception == Kim Crawley compared the site to VirusTotal and states that vx-underground is more susceptible to suspicion for law enforcement. == Data breach reports == In May 2024, the International Baccalaureate organizations faced allegations over supposed breaches in their IT infrastructure after an incident of examination leaks. Upon inspecting leaked data, VXUG were the first to report that the breach seemed legitimate on the morning of May 6.

  Read more →