AI Email Edit

AI Email Edit — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Foveated imaging

  Foveated imaging is a digital image processing technique in which the image resolution, or amount of detail, varies across the image according to one or more "fixation points". A fixation point indicates the highest resolution region of the image and corresponds to the center of the eye's retina, the fovea. The location of a fixation point may be specified in many ways. For example, when viewing an image on a computer monitor, one may specify a fixation using a pointing device, like a computer mouse. Eye trackers which precisely measure the eye's position and movement are also commonly used to determine fixation points in perception experiments. When the display is manipulated with the use of an eye tracker, this is known as a gaze contingent display. Fixations may also be determined automatically using computer algorithms. Some common applications of foveated imaging include imaging sensor hardware and image compression. For descriptions of these and other applications, see the list below. Miniaturized foveated imaging systems can be realized by high-resolution 3D printing of multi-lens objectives directly on a CMOS (Complementary metal-oxide-semiconductor) chip. Foveated imaging is also commonly referred to as space variant imaging or gaze contingent imaging. == Applications == === Compression === Contrast sensitivity falls off dramatically as one moves from the center of the retina to the periphery. In lossy image compression, one may take advantage of this fact in order to compactly encode images. If one knows the viewer's approximate point of gaze, one may reduce the amount of information contained in the image as the distance from the point of gaze increases. Because the fall-off in the eye's resolution is dramatic, the potential reduction in display information can be substantial. Also, foveation encoding may be applied to the image before other types of image compression are applied and therefore can result in a multiplicative reduction. === Foveated sensors === Foveated sensors are multiresolution hardware devices that allow image data to be collected with higher resolution concentrated at a fixation point. An advantage to using foveated sensor hardware is that the image collection and encoding can occur much faster than in a system that post-processes a high resolution image in software. === Simulation === Foveated imaging has been used to simulate visual fields with arbitrary spatial resolution. For example, one may present video containing a blurred region representing a scotoma. By using an eye-tracker and holding the blurred region fixed relative to the viewer's gaze, the viewer will have a visual experience similar to that of a person with an actual scotoma. === Video gaming === Foveated rendering is a rendering optimization technique which uses an eye tracker integrated with a virtual reality headset to reduce the rendering workload by greatly reducing the image quality in the peripheral vision (outside of the zone gazed by the fovea).. However, other than the near-eye displays (e.g., virtual reality headset), foveated rendering is also suitable for large high-resolution display walls, desktop monitor, and even for smart phones. Over the time different foveated rendering techniques are proposed, for instance, adaptive resolution, geometric simplification, shading simplification and chromatic degradation, spatio-temporal deterioration . If we consider the variable sample distribution of physically-based rendering under the shader (e.g., hit/miss etc.), then this degradation strategies are applied on overall foveated rendering. At the CES 2016, SensoMotoric Instruments (SMI) demoed a new 250 Hz eye tracking system and a working foveated rendering solution. It resulted from a partnership with camera sensor manufacturer Omnivision who provided the camera hardware for the new system. The Apple Vision Pro mixed reality headset features dynamic foveated rendering provided by its visionOS operating system. === Quality assessment === Foveated imaging may be useful in providing a subjective image quality measure. Traditional image quality measures, such as peak signal-to-noise ratio, are typically performed on fixed resolution images and do not take into account some aspects of the human visual system, like the change in spatial resolution across the retina. A foveated quality index may therefore more accurately determine image quality as perceived by humans. === Image database retrieval === In databases that contain very high resolution images, such as a satellite image database, it may be desirable to interactively retrieve images in order to reduce retrieval time. Foveated imaging allows one to scan low resolution images and retrieve only high resolution portions as they are needed. This is sometimes called progressive transmission. == Example images ==

  Read more →
• 

  Computer-aided lean management

  Computer-aided lean management, in business management, is a methodology of developing and using software-controlled, lean systems integration. Its goal is to drive innovation towards cost and cycle-time savings. It attempts to create an efficient use of capital and resources through the development and use of one integrated system model to run a business's planning, engineering, design, maintenance, and operations. == Overview == Computer-Aided Lean Management (CALM) is a management philosophy that uses software to reduce risk and inefficiencies. CALM acts on uncertainties and business inefficiencies to increase profitability through the use of computational decision-making tools that enable opportunities for additional value creation. It is based on the application of software to enable continuous improvement through an Integrated System Model (ISM) of the business’s physical assets, business processes, and machine learning. This integration of software applications using lean principles was developed in the aerospace industry and has migrated to the energy industry. The creation of an ISM removes the barriers posed by the silos or stovepipes inherent in the departmentalization of most companies. Integration enables lean uses of information for the creation of actionable knowledge. CALM strives to create such a lean management approach to running the company through the rigors of software enforcement. From this software enforcement comes clear policy and procedures that are adhered to, activity-based costing, measurement of effectiveness, and the capability of using advanced algorithms for dramatic improvements in optimization of resources. CALM creates business capabilities through software to enable technology application, streamlining of processes, and a lean organizational structure. The methodology is based on a common sense approach for running a business, by measuring actions taken and using those measurements to design more efficient processes. == History == CALM was inspired by lean processes and techniques that were already dominant management technologies with a wide diversity of applications and successes. Motorola and General Electric had been known for the concepts of Six Sigma; Boeing had been managing mass (using modular and flexible assembly options), and Toyota combined elements of these methodologies to create the Toyota Production System. Boeing then took the Toyota model and added computer-aided enforcement of lean methodologies throughout the manufacturing process. One of the major sources for CALM's outgrowth was integrated definition (IDEF) modeling in aerospace manufacturing that was pioneered by the U.S. Air Force in the 1970s. IDEF is a methodology designed to model the end-to-end decisions, actions, and activities of an organization or system so that costs, performance, and cycle times can be optimized. IDEF methods have been adapted for wider use in automotive, aerospace, pharmaceuticals, and software development industries. IDEF methods serve as a starting point to understand lean management through semantic data modeling. The IDEF process begins by mapping the existing functions of an enterprise, creating a graphical model, or road map, that shows what controls each important function, who performs it, what resources are required for carrying it out, what it produces, how much it costs, and what relationships it has to other functions of the organization. IDEF simulations have been found to be efficient at streamlining and modernizing both companies and governmental agencies. Perhaps the best-developed evolution of the IDEF model beyond Toyota was at Boeing. Their project life-cycle process has grown into a rigorous software system that links people, tasks, tools, materials, and the environmental impact of any newly planned project, before any building is allowed to begin. Routinely, more than half of the time for any given project is spent building the precedence diagrams, or three-dimensional process maps, integrating with outside suppliers, and designing the implementation plan–all on the computer. Once real activity is initiated, an action tracker is used to monitor inputs and outputs versus the schedule and delivery metrics in real time throughout the organization. When the execution of a new airplane design begins, it is so well organized that it consistently cuts both costs and build time in half for each successive generation of airframe. Boeing created a complex lean management process called 'define and control airplane configuration/manufacturing resource management' (DCAC/MRM). The process was built with the help of the operations research and computer sciences departments of the University of Pittsburgh. The manufacture of the Boeing 777 was ultimately a success, and it became the precursor to succeeding generations of CALM at Boeing. The methodology of CALM has recently been applied to field orientated infrastructure based businesses with highly interdependent systems, such as electric utilities where a smart grid concept is being researched and developed. The management of infrastructure-based industries like oil, gas, electricity, water, transportation, and renewables requires massive investments in interdependent, physical infrastructure, as well as simultaneous attention to disparate market forces. In infrastructure businesses that manage field assets, uncertainty is the biggest impediment to profitability, rather than the maintenance of efficient supply chains or the management of factory assembly lines. These businesses are dominated by risk from uncertainties such as weather, market variations, transportation disruptions, government actions, logistic difficulties, geology, and asset reliability. CALM has been applied to deal with these types of infrastructure based challenges.

  Read more →
• 

  Clubhouse (app)

  Clubhouse is an American social audio app for iOS and Android developed by Alpha Exploration Co. that enables users to participate in real-time, audio-only communication within virtual "rooms". Launched in March 2020 by Paul Davison and Rohan Seth, the platform is characterized by its "drop-in" nature, where users can join live discussions on a wide range of topics as either listeners or speakers. The application gained attention in early 2021, operating on an invite-only model and featuring appearances from public figures such as Elon Musk, Oprah Winfrey, and Mark Zuckerberg. During this period, Clubhouse reached a reported valuation of approximately $4 billion and contributed to the expansion of similar social audio features like Twitter Spaces and Spotify Greenroom. The app later expanded to Android in May 2021 and removed its waitlist in July 2021, opening access to the general public. == History == Clubhouse began as an invite only social media startup by Paul Davison and Rohan Seth in Fall 2019. Originally designed for podcasts with the name Talkshow, the app was rebranded as "Clubhouse" and officially released for the iOS operating system in March 2020 and as of May 2021 the Android systems as well. Clubhouse was valued at $100 million after receiving funding from notable angel investors. These investors included Ryan Hoover (Founder, Product Hunt), Balaji Srinivasan (Former CTO, Coinbase), James Beshara (Co-Founder, Tilt.com), and several venture capitalists, including a $12 million Series A investment from the venture capital firm, Andreessen Horowitz, in May 2020. The app gained popularity in the early months of the COVID-19 pandemic. It had 600,000 registered users by December 2020. In January 2021, CEO Paul Davison announced that the active weekly user base on the app consisted of approximately 2 million individuals. The company announced that it would start working on an Android version of the app. In that month, the app became widely used in Germany when German podcast hosts Philipp Klöckner and Philipp Gloeckler began an invite-chain over a Telegram group. It brought German influencers, journalists, and politicians to the platform. Clubhouse raised their Series B at a $1 billion valuation. On February 1, 2021, Clubhouse had an estimated 3.5 million downloads on a global level which grew rapidly to 8.1 million downloads by February 15. This significant growth in popularity was because celebrities such as Elon Musk and Mark Zuckerberg made appearances on the app. In the same month, Clubhouse hired an Android Software Developer. A year after the app's release, the number of weekly active users was greater than 10 million, but the user base declined 21% during three weeks from late February to early March. This decline was reportedly caused by a decrease in the number of Clubhouse users after its initial release. During its initial roll out, the app was accessible only by invitation, and invitation codes on eBay were selling at up to $400. On April 5, 2021, Clubhouse partnered with Stripe to launch its first monetizing feature called Clubhouse Payments. Although testing began with only 1,000 users, after a week, the company rolled out the functionality to another 60,000 or more users in the US. In the same month, Twitter entered in discussions to purchase Clubhouse for $4 billion. The talks ended with no acquisition. Later, the company raised their Series C round of funding at a $4 billion valuation. The app also received interest in a partnership, with the National Football League announcing a content deal that month; Twitter Spaces later poached Clubhouse's exclusive NFL deal with 20 official NFL Spaces scheduled for the 2021-22 season. Finally, On May 9, 2021, Clubhouse launched a beta version of the Android app for users in the US, and on May 21, 2021, Clubhouse became available worldwide for Android users. In July 2021, Clubhouse announced a partnership with TED to offer exclusive talks. and on July 21, 2021, the company discarded its invitation system and made the application available to all, though a wait list for registration was still applied in order to manage new traffic. As of the time of the announcement, the company stated it had 10 million users on the wait list. On September 23, 2021, the company announced a new feature named "Wave". In October 2021, Clubhouse rolled out new features called "Replays and Clips". In April 2023, the company announced it was reducing its staff by half amid a "resetting" due to post-pandemic market shifts. == Features == === Rooms === The primary feature of Clubhouse is real-time virtual "rooms" in which users can communicate with each other via audio. Rooms are divided into different categories based on levels of privacy. Moderator roles are denoted by a green star that appears next to the user's name. When a user joins a room, they are initially assigned to the role of a "listener" and cannot unmute themselves. Listeners can notify the moderators of their intent to join the stage and speak by clicking on the "raise hand" icon. Users who are invited to the stage become "speakers" and can unmute themselves. Users can exit a room by tapping the "leave quietly" button or with the help of peace sign emoji. === Houses === In August 2022, Clubhouse announced a feature called Houses, an invite-based version of the rooms. === Events === A lot of conversations in Clubhouse are of spontaneous nature. However, users can schedule conversations by creating events. While scheduling an event, users can first name the event and then set the date and time at which the conversation will begin. Users can also add co-hosts to help moderate the event. Once the event has been created, it is added to the Clubhouse "bulletin". The bulletin shows upcoming scheduled events and allows users to set notifications for events by clicking the bell icon corresponding to the event. Users can access the bulletin by clicking on the calendar icon at the top of the home page. === Clubs === At the Clubhouse, clubs are user communities that regularly discuss a common interest. Many clubs are present in Clubhouse which represents a wide array of topics. Users can find clubs by name under the search tab. A club consists of three categories of users: "Admin", "Leader", and "Member". Members can create private rooms and invite more users into the club. Leaders have all the privileges of a member. Apart from that, they are authorized to create/schedule club-branded open rooms. An admin can modify club settings, add/delete users, change user privileges and create/schedule any type of room. There are three types of clubs: "Open", "By Approval", and "Closed" for membership. Any user can join an open club by pressing the "Join The Club" button on the club profile. In case of approval, users need to apply and wait for membership by clicking the "Apply To Join" button on the club profile. The admins of the respective club are privileged to accept or reject the user's request. In a closed club, membership is limited to users selected by the club admin. All users of a club will be notified when a public room within the club is created. The club creation is restricted to active users and whoever creates the club will become the club admin. Eligible users can create a club by going to their profile, press the "+" sign present in the "Member of" section. Clubs in which a user is a member are shown on their profile page. The first club to half a million members was the Human Behavior Club founded by The Digital Doctor (Dr. Sohaib Imtiaz). === Backchannel === Backchannel is the messaging function which allows users to interact individually or within a group via text. The Backchannel feature was initially leaked on June 18, 2021, in response to the launch of Spotify Greenroom. This is notable step because, until this point, Clubhouse was voice only with no way to hyperlink or message. It was entirely dependent on Instagram and Twitter for text messaging. The feature was initially leaked in the App Store, which the company says was an accident on Twitter. A month later, after multiple failed attempts, the Clubhouse Backchannel finally launched on July 14, 2021. === Explore === The homepage of Clubhouse provides access to ongoing chat rooms, which are recommended based on the people and clubs that are followed by the user. As the users tap on the magnifying glass icon, they will be redirected to the explore page. On that page, users can search for people and clubs to follow and also find conversations categorized by topics. === Clubhouse Payments === This is the direct payment service provided by the app, which allows users to send money to content creators. It includes those users who had enabled this functionality in their profile. Money can be sent from users to the creator by clicking on their profile. Press "Send Money" then enter the amount you want to send. When a user does this for the first time, they'll be prompted to reg

  Read more →
• 

  WinFIG

  WinFIG is a proprietary shareware vector graphics editor application. The file format and rendering are as close to Xfig as possible, but the program takes advantage of Windows features like clipboard, printer preview, multiple documents etc. As of 2011, WinFIG is under active development, with new features being added regularly. == History == The first release was in March 2003 and based on the Amiga program AmiFIG by the same author, which is also an Xfig compatible vector drawing application. WinFIG was not created by porting the Xfig source code to Windows. It is an independent implementation. Starting with release 4.0 WinFIG was ported from MFC to the Qt toolkit as the application framework and thereby enabling the first release of a Linux version. After Version 7.8 the Version scheme changes to years with version 2021.1. == Interface and usability == WinFIG is designed to provide a clear, efficient and convenient graphical user interface. It allows working on multiple documents using an MDI user interface and provides unlimited undo and redo of actions. == Features == === Object creation === The basic types of objects in WinFIG are: Open and closed Splines Ellipses Polylines and Polygons Texts LaTeX formatted texts Arcs Images: PNG, GIF, JPEG, EPS and more Compound objects, which are hierarchical compositions of objects Objects can have several attributes, which depend on the object type: Line width Line style Line cap style Line join style Arrows Outline color, fill color and fill pattern === Object manipulation === move copy scale rotate align add/delete points from lines or splines copy object attributes Numerical input of point coordinates === Exports === WinFIG can export into various formats: Raster formats: GIF, JPEG, PNG, PPM, XBM, XPM, PCX, TIFF, SLD Formats for printed documents: PostScript, PDF, LaTeX, HP-GL (printer control language used by Hewlett-Packard plotters), Vector graphics formats: EPS, SVG, PSTricks, TPIC, PIC, CGM, Metafont, MetaPost, EMF, Tk. === Miscellaneous === Winfig can handle smart links. A smart link is a moving connection from a source to a target object. It is established by connecting the end point of a line or spline to another object. The connecting line or spline segment follows the movements of the target object. Smart links are useful for diagrams, graphs etc. WinFIG can show a grid and provides several magnet modes for constraining editing operations to discrete coordinates. Objects can be organized in layers to control their Z-order. This is important to control overlapping of filled shapes. Object library: drawings can be stored in a special sub-folder in the program installation directory, which makes them available in the library dialog for easy reuse.

  Read more →
• 

  FastTrack Automation Studio

  FastTrack Automation Studio (formerly known as FastTrack Scripting Host), often referred to as just FastTrack, is a scripting language for Windows IT System Administrators. The product’s goal is to handle any kind of scripting that might be required to automate processes with Microsoft Windows networks. == Manufacturer == FastTrack is produced by FastTrack Software, which is headquartered in Aalborg, Denmark. The product is promoted by the manufacturer as a one-stop shop for Windows script writers and its development paradigm is “one operation = one script line”. Script writers use a purpose-built editor to create scripts, inserting script lines via menus, drag’n drop, or simply typing them in. Scripts may be used out of the box, created from scratch, imported from forums or other users, or customized from product documentation. == Types of scripts == Simple scripts include: Outlook Signatures Login scripts Backup and replication scripts Inventory and asset management Automated Windows OS installation and deployment Automated application software deployment Active Directory scripts More advanced scripts include: SCCM task sequences Citrix ICA and RDP Clients built-in Deploying applications to server farms Deploying GPO MSI files SQL Server scripts == Basic structure == Under the hood, scripts comprise commands, functions, collections, and conditions. When a script is executed these components are converted into many lines of C# code, sometimes hundreds of lines, depending on the particular script operation. Scripts can be compiled into EXE files or MSI packages and treated as standalone Windows applications. == History == FastTrack Scripting Host (FastTrack) was first developed around 2006 to ease the administration burden of IT System Administrators on Windows networks. === Product idea === The idea for the product came from founder and President of FastTrack Software, Lars Pedersen, who has a background in systems administration. Previously with Telenor, Denmark’s major telephone company, Pedersen performed various roles in systems administration, programming and web development. He also worked as a consultant and developer on several major projects at various companies in Europe. Dissatisfied from his own experiences and frustrations administering Windows networks, Pederson looked for a way to make life easier for system administrators. In particular, he wanted something that could minimize the amount of time needed each day to perform routine and mundane tasks, which was a waste of time and expertise that should have been committed to other projects. === Development === Leading a small team of developers, Pedersen developed FastTrack Scripting Host to simplify and automate the routine tasks of system administrators. The resulting product is definitely a scripting language, but it can be used intuitively like a programming language, without requiring users to learn syntax or other concepts typically associated with programming languages. === Marketing === In April 2010, FastTrack Software entered into an agreement with Binary Research International Archived 2008-10-15 at the Wayback Machine, based in the city of Milwaukee, United States to market and sell the product globally. === Awards === FSH received a Windows IT Pro Community Choice award in 2012. == Versions == The first version was produced in June 2006 and contained 51 components, which are the commands, functions, conditions and collections making up FastTrack. The following table summarizes dates and components for major releases. Companies and organizations such as NOAA, Kawasaki, and Goodyear have used and implemented the FastTrack Scripting Host. == Comparison with other scripting software == FastTrack Scripting Host Kixtart PowerShell ScriptLogic VBScript

  Read more →
• 

  Automated storage and retrieval system

  An automated storage and retrieval system (ASRS or AS/RS) consists of a variety of computer-controlled systems for automatically placing and retrieving loads from defined storage locations. Automated storage and retrieval systems (AS/RS) are typically used in applications where: There is a very high volume of loads being moved into and out of storage Storage density is important because of space constraints No value is added in this process (no processing, only storage and transport) Accuracy is critical because of potential expensive damages to the load An AS/RS can be used with standard loads as well as nonstandard loads, meaning that each standard load can fit in a uniformly-sized volume; for example, the film canisters in the image of the Defense Visual Information Center are each stored as part of the contents of the uniformly sized metal boxes, which are shown in the image. Standard loads simplify the handling of a request of an item. In addition, audits of the accuracy of the inventory of contents can be restricted to the contents of an individual metal box, rather than undergoing a top-to-bottom search of the entire facility, for a single item. They can also be used in self storage places. == Overview == AS/RS systems are designed for automated storage and retrieval of parts and items in manufacturing, distribution, retail, wholesale and institutions. They first originated in the 1960s, initially focusing on heavy pallet loads but with the evolution of the technology the handled loads have become smaller. The systems operate under computerized control, maintaining an inventory of stored items. Retrieval of items is accomplished by specifying the item type and quantity to be retrieved. The computer determines where in the storage area the item can be retrieved from and schedules the retrieval. It directs the proper automated storage and retrieval machine (SRM) to the location where the item is stored and directs the machine to deposit the item at a location where it is to be picked up. A system of conveyors and or automated guided vehicles is sometimes part of the AS/RS system. These take loads into and out of the storage area and move them to the manufacturing floor or loading docks. To store items, the pallet or tray is placed at an input station for the system, the information for inventory is entered into a computer terminal and the AS/RS system moves the load to the storage area, determines a suitable location for the item, and stores the load. As items are stored into or retrieved from the racks, the computer updates its inventory accordingly. The benefits of an AS/RS system include reduced labor for transporting items into and out of inventory, reduced inventory levels, more accurate tracking of inventory, and space savings. Items are often stored more densely than in systems where items are stored and retrieved manually. Within the storage, items can be placed on trays or hang from bars, which are attached to chains/drives in order to move up and down. The equipment required for an AS/RS include a storage & retrieval machine (SRM) that is used for rapid storage and retrieval of material. SRMs are used to move loads vertically or horizontally, and can also move laterally to place objects in the correct storage location. The trend towards Just In Time production often requires sub-pallet level availability of production inputs, and AS/RS is a much faster way of organizing the storage of smaller items next to production lines. The Material Handling Institute of America (MHIA), the non-profit trade association for the material handling world, and its members have categorised AS/RS into two primary segments: Fixed Aisle and Carousels/Vertical Lift Modules (VLMs). Both sets of technologies provide automated storage and retrieval for parts and items, but use different technologies. Each technology has its unique set of benefits and disadvantages. Fixed Aisle systems are characteristically larger systems whereas carousels and Vertical Lift Modules are used individually or grouped, but in small to medium-sized applications. A fixed-aisle AS/R machine (stacker crane) is one of two main designs: single-masted or double masted. Most are supported on a track and ceiling guided at the top by guide rails or channels to ensure accurate vertical alignment, although some are suspended from the ceiling. The 'shuttles' that make up the system travel between fixed storage shelves to deposit or retrieve a requested load (ranging from a single book in a library system to a several ton pallet of goods in a warehouse system). The entire unit moves horizontally within an aisle, while the shuttles are able to elevate up to the necessary height to reach the load, and can extend and retract to store or retrieve loads that are several positions deep in the shelving. A semi-automated system can be achieved by utilizing only specialized shuttles within an existing rack system. Another AS/RS technology is known as shuttle technology. In this technology the horizontal movement is made by independent shuttles each operating on one level of the rack while a lift at a fixed position within the rack is responsible for the vertical movement. By using two separate machines for these two axes the shuttle technology is able to provide higher throughput rates than stacker cranes. Storage and Retrieval Machines pick up or drop off loads to the rest of the supporting transportation system at specific stations, where inbound and outbound loads are precisely positioned for proper handling. In addition, there are several types of Automated Storage & Retrieval Systems (AS/RS) devices called Unit-load AS/RS, Mini-load AS/RS, Mid-Load AS/RS, Vertical Lift Modules (VLMs), Horizontal Carousels and Vertical Carousels. These systems are used either as stand-alone units or in integrated workstations called pods or systems. These units are usually integrated with various types of pick to light systems and use either a microprocessor controller for basic usage or inventory management software. These systems are ideal for increasing space utilization up to 90%, productivity levels by 90%, accuracy to 99.9%+ levels and throughput up to 750 lines per hour/per operator or more depending on the configuration of the system. == Horizontal carousels == Robotic Inserter/Extractor devices can be used for horizontal carousels. The robotic device is positioned in the front or rear of up to three horizontal carousels tiered high. The robot grabs the tote required in the order and often replenishes at the same time to speed up throughput. The tote(s) are then delivered to a conveyor, which routes it to a work station for picking or replenishing. Up to eight transactions per minute per unit can be done. Totes or containers up to 36" x 36" x 36" can be used in a system. On a simplistic level, horizontal carousels are also often used as "rotating shelving". With simple "fetch" command, items are brought to the operator and otherwise wasted space is eliminated. AS/RS Applications: Most applications of AS/RS technology have been associated with warehousing and distribution operations. An AS/RS can also be used to store raw materials and work in process in manufacturing. Three application areas can be distinguished for AS/RS: (1) Unit load storage and handling, (2) Order picking, and (3) Work in process storage. Unit load storage and retrieval applications are represented by unit load AS/RS and deep-lane storage systems. These kinds of applications are commonly found in warehousing for finishing goods in a distribution center, rarely in manufacturing. Deep-lane systems are used in the food industry. As described above, order picking involves retrieving materials in less than full unit load quantities. Minilpass, man-on board, and items retrieval systems are used for this second application area. Work in process storage is a more recent application of automated storage technology. While it is desirable to minimize the amount of work in process, WIP is unavoidable and must be effectively managed. Automated storage systems, either automated storage/retrieval systems or carousel systems, represent an efficient way to store materials between processing steps, particularly in batch and job shop production. In high production, work in process is often carried between operations by conveyor system, which this serve both storage and transport functions. === Inventory Category-specific AS/RS === Each inventory category—raw materials, work-in-process, and finished goods—requires its own specialized Automated Storage and Retrieval System (AS/RS). Particularly for work-in-process (WIP) inventories, due to variations in manufacturing processes, the AS/RS systems are significantly different in design and function, tailored specifically to match unique handling, storage, and retrieval requirements === Installed applications === Installed applications of this technology can be wide-ranging. In some librarie

  Read more →
• 

  Imaging

  Imaging is the process of creating visual representations of objects, scenes, or phenomena. The term encompasses both the formation of images through physical processes and the technologies used to capture, store, process, and display them. While traditional imaging relies on visible light, modern imaging systems can visualize information across the electromagnetic spectrum and through other physical phenomena such as sound waves, magnetic fields, and particle emissions, enabling the visualization of subjects invisible to the human eye. Imaging science is the multidisciplinary field concerned with the theoretical foundations and practical applications of image creation and analysis. The field draws on physics, mathematics, electrical engineering, computer science, computer vision, and perceptual psychology to develop systems that generate, collect, duplicate, analyze, modify, and visualize images. == Principles == === The imaging chain === The imaging chain is a conceptual framework describing the interconnected components of any imaging system. Understanding each link in this chain allows engineers and scientists to optimize system performance for specific applications. The chain begins with the subject and its observable properties, typically energy that is emitted, reflected, or transmitted. A light source or other energy source may illuminate the subject to make these properties detectable. The capture device then collects this energy using appropriate sensors: optical systems for electromagnetic radiation, transducers for acoustic waves, or antenna arrays for radio frequencies. In digital systems, a processor converts the captured signals into a format suitable for rendering, applying algorithms for noise reduction, enhancement, or reconstruction. Finally, a display renders the processed information as a visible image on media such as paper, screens, or projection surfaces. Throughout this process, the characteristics of the human visual system inform design decisions, as the ultimate purpose of most imaging systems is to convey information to human observers. === Coherent and non-coherent imaging === Imaging systems are often classified by whether they use coherent or non-coherent illumination. Coherent imaging employs an active source that produces waves with a consistent phase relationship, as in radar, synthetic aperture radar, medical ultrasound, and optical coherence tomography. These systems can capture phase information in addition to amplitude, enabling techniques such as holography and interferometry. Non-coherent imaging systems, including conventional photography, fluorescence microscopy, and telescopes, rely on illumination sources where light waves have random phase relationships. == Methods and applications == Imaging methods span a wide range of physical principles, each suited to particular applications. Optical imaging encompasses photography, cinematography, microscopy, and telescopic observation. These methods capture electromagnetic radiation in or near the visible spectrum and form the basis of most consumer and scientific imaging. Extensions include thermography, which visualizes infrared radiation to reveal temperature distributions, and multispectral imaging, which captures data across multiple wavelength bands for applications in remote sensing and materials analysis. Medical imaging comprises techniques designed to visualize the interior of the human body for diagnostic and therapeutic purposes. Radiography and computed tomography use X-rays to image dense structures such as bone. Magnetic resonance imaging exploits nuclear magnetic properties to produce detailed soft-tissue images without ionizing radiation. Ultrasound imaging uses high-frequency sound waves and is particularly valuable for real-time imaging and fetal monitoring. Nuclear medicine techniques such as positron emission tomography track radioactive tracers to reveal metabolic activity. Emerging modalities include photoacoustic imaging, which combines optical and acoustic principles, and Magneto-acousto-electrical tomography, which maps electrical conductivity in biological tissues. Acoustic imaging uses sound waves to create images. Beyond medical ultrasound, applications include sonar for underwater navigation and mapping, seismic imaging for geological exploration, and industrial non-destructive testing. Radar and microwave imaging employ radio waves to detect and image objects. Synthetic aperture radar produces high-resolution images from aircraft or satellites regardless of weather or lighting conditions, making it essential for Earth observation and reconnaissance. Ground-penetrating radar images subsurface structures for archaeological and engineering applications. Electron and particle imaging use beams of electrons or other particles to achieve resolutions far beyond the diffraction limit of visible light. Electron microscopes can image individual atoms, enabling advances in materials science and structural biology. Chemical imaging combines spectroscopy with spatial imaging to map the chemical composition of samples, with applications in pharmaceutical development, food safety, and forensics. LIDAR (Light Detection and Ranging) measures distances using laser pulses to create three-dimensional representations of surfaces and objects, widely used in autonomous vehicles, topographic mapping, and forestry. Computational and digital imaging encompasses image processing, computer graphics, three-dimensional rendering, and digital image restoration. Computer vision applies algorithmic analysis to extract information from images automatically. == History == Photography and imaging have always been intertwined. When Joseph Nicéphore Niépce created the first permanent photograph using heliography in 1826, and Louis Daguerre refined the process into the daguerreotype a decade later, they weren't just inventing a new art form, they were laying the groundwork for an entire scientific discipline built on silver halide chemistry. For most of the nineteenth century, photography remained the province of specialists. That changed with George Eastman's Kodak camera, introduced in 1888 with the slogan "You press the button, we do the rest." Suddenly, anyone could take pictures. Around the same time, Wilhelm Röntgen stumbled onto X-rays in 1895, an accident that would spawn the entire field of medical imaging. World War II proved to be a turning point. Radar technology, developed frantically on both sides of the conflict, introduced concepts that engineers would later adapt for synthetic aperture radar and medical ultrasound. Then the charge-coupled device came: Willard Boyle and George E. Smith built the first one at Bell Labs in 1969, and within a few decades it had made film nearly obsolete. Magnetic resonance imaging arrived in the 1970s, offering doctors something X-rays never could, detailed views of soft tissue without any radiation. Digital cameras took over fast. By the 2000s, film was already in decline; by the 2010s, smartphones had put a surprisingly capable camera in nearly every pocket. Features that once required real skill, proper exposure, sharp focus, accurate color, became automatic. Today, billions of photos get uploaded to social media every day. As a result, a growing issue is that generative artificial intelligence can fabricate photorealistic images from scratch. What counts as a "real" photograph is no longer necessarily obvious.

  Read more →
• 

  Microsoft To Do

  Microsoft To Do (previously styled as Microsoft To-Do) is a cloud-based task management application. It allows users to manage their tasks from a smartphone, tablet and computer. The technology is produced by the team behind Wunderlist, which was acquired by Microsoft, and the stand-alone apps feed into the existing Tasks feature of the Outlook product range. == History == Microsoft To Do was first launched as a preview with basic features in April 2017. Later more features were added including Task list sharing in June 2018. In September 2019, a major update to the app was unveiled, adopting a new user interface with a closer resemblance to Wunderlist. The name was also slightly updated by removing the hyphen from To-Do. In May 2020, Microsoft officially closed the doors on Wunderlist, ending its active service in favor of improving and expanding Microsoft To Do.

  Read more →
• 

  Hybrid machine translation

  Hybrid machine translation is a method of machine translation that is characterized by the use of multiple machine translation approaches within a single machine translation system. The motivation for developing hybrid machine translation systems stems from the failure of any single technique to achieve a satisfactory level of accuracy. Many hybrid machine translation systems have been successful in improving the accuracy of the translations, and there are several popular machine translation systems which employ hybrid methods. == Approaches == === Multi-engine === This approach to hybrid machine translation involves running multiple machine translation systems in parallel. The final output is generated by combining the output of all the sub-systems. Most commonly, these systems use statistical and rule-based translation subsystems, but other combinations have been explored. For example, researchers at Carnegie Mellon University have had some success combining example-based, transfer-based, knowledge-based and statistical translation sub-systems into one machine translation system. === Statistical rule generation === This approach involves using statistical data to generate lexical and syntactic rules. The input is then processed with these rules as if it were a rule-based translator. This approach attempts to avoid the difficult and time-consuming task of creating a set of comprehensive, fine-grained linguistic rules by extracting those rules from the training corpus. This approach still suffers from many problems of normal statistical machine translation, namely that the accuracy of the translation will depend heavily on the similarity of the input text to the text of the training corpus. As a result, this technique has had the most success in domain-specific applications, and has the same difficulties with domain adaptation as many statistical machine translation systems. === Multi-Pass === This approach involves serially processing the input multiple times. The most common technique used in multi-pass machine translation systems is to pre-process the input with a rule-based machine translation system. The output of the rule-based pre-processor is passed to a statistical machine translation system, which produces the final output. This technique is used to limit the amount of information a statistical system need consider, significantly reducing the processing power required. It also removes the need for the rule-based system to be a complete translation system for the language, significantly reducing the amount of human effort and labor necessary to build the system. === Confidence-Based === This approach differs from the other hybrid approaches in that in most cases only one translation technology is used. A confidence metric is produced for each translated sentence from which a decision can be made whether to try a secondary translation technology or to proceed with the initial translation output. SMT is also used when common error patterns such as multiple repeat words appear in sequence, as is common with NMT when the attention mechanism is confused.

  Read more →
• 

  Tresorit

  Tresorit is a Swiss company providing end-to-end encrypted cloud storage and secure content collaboration services. Founded in 2011, the company primarily serves businesses and organizations with elevated data protection and compliance requirements. Since 2021, Tresorit has been part of Swiss Post's digital business services, which, under the name 'Swiss Post Digital' offer secure communication platforms and connectable software solutions for SMEs, public authorities, and the healthcare sector, among others. == History == Tresorit was founded in 2011 by Hungarian software developers Istvan Lam, Szilveszter Szebeni and Gyorgy Szilagyi with the aim of providing a secure alternative to traditional cloud storage solutions. The company developed a cloud collaboration platform based on client-side end-to-end encryption and a zero-knowledge architecture. In its early years, Tresorit gained attention through a public security challenge inviting researchers to attempt to compromise its encryption system. The initiative received coverage in technology and cybersecurity media. The company initially positioned itself as a secure alternative to conventional cloud storage services and gradually expanded its offering toward enterprise-focused collaboration tools. In 2021, Swiss Post Communications Services acquired a majority stake in Tresorit. The company is now part of Swiss Post, and continues to operate independently within Swiss Post’s digital division, while benefiting from the broader infrastructure and institutional framework of its parent organization. Tresorit has offices in Zurich, Munich, and Budapest. == Products and Services == Tresorit provides a cloud-based platform for secure file storage and collaboration. Its services include encrypted file sharing, email encryption, electronic signatures, and encrypted data rooms for managing sensitive documents and workflows. The platform is available on Windows, macOS, Linux, Android, and iOS. == Technology == Tresorit uses client-side end-to-end encryption based on a zero-knowledge model. Files are encrypted on the user’s device before being uploaded to company servers. According to the company, encryption keys remain under user control, meaning that Tresorit and third parties cannot access the content of stored files. == Security challenge == Between 2013 and 2014, Tresorit organized a public challenge inviting security researchers to attempt to compromise the service's encryption implementation. The challenge received coverage in technology and cybersecurity media. == Acquisition by Swiss Post == In 2021, Swiss Post Communications Services acquired a majority stake in Tresorit as part of Swiss Post’s broader digital services strategy. The company is now part of Swiss Post. == Reception == Tresorit has been covered by international technology and business publications in the context of secure cloud storage and encrypted collaboration services. TechCrunch described the company as an early European provider of end-to-end encrypted cloud services, while The New York Times included it in discussions of secure file-sharing tools. Other publications such as TechRadar and ITPro have reviewed Tresorit in the context of enterprise security and confidential data handling.

  Read more →
• 

  Flexidraw

  Flexidraw is a 1985 graphics computer program published by Inkwell Systems. == Gameplay == Flexidraw is a graphics program that allows users to produce drawings using a light pen and print them. == Reception == Roy Wagner reviewed the product for Computer Gaming World, and stated that "Of the many graphics programs available Flexidraw is certainly the best supported by it's [sic] parent company."

  Read more →
• 

  Teleradiology

  Teleradiology is the transmission of radiological patient images from procedures such as x-rays, Computed tomography (CT), and MRI imaging, from one location to another for the purposes of sharing studies with other radiologists and physicians. Teleradiology allows radiologists to provide services without actually having to be at the location of the patient. This is particularly important when a sub-specialist such as an MRI radiologist, neuroradiologist, pediatric radiologist, or musculoskeletal radiologist is needed, since these professionals are generally only located in large metropolitan areas working during daytime hours. Teleradiology allows for specialists to be available at all times. Teleradiology utilizes standard network technologies such as the Internet, telephone lines, wide area networks, local area networks (LAN) and the latest advanced technologies such as medical cloud computing. Specialized software is used to transmit the images and enable the radiologist to effectively analyze potentially hundreds of images of a given study. Technologies such as advanced graphics processing, voice recognition, artificial intelligence, and image compression are often used in teleradiology. Through teleradiology and mobile DICOM viewers, images can be sent to another part of the hospital or to other locations around the world with equal effort. Teleradiology is a growth technology given that imaging procedures are growing approximately 15% annually against an increase of only 2% in the radiologist population. == Reports == Teleradiology services commonly provide either preliminary or final interpretations of medical imaging studies. Preliminary reads are frequently used in emergency settings to support immediate clinical decisions and may include direct communication of critical findings to the referring physician. Some providers report turnaround times of approximately 30 minutes for emergency cases, with faster processing for time-sensitive conditions such as stroke. Final reads are definitive and used in official patient records and billing. These reports typically include all relevant findings and may require access to prior imaging and clinical data. Teleradiology is also employed to provide off-hour or overflow coverage for healthcare institutions lacking continuous on-site radiology staffing. == Subspecialties == Some teleradiologists are fellowship trained and have a wide variety of subspecialty expertise including such difficult-to-find areas as neuroradiology, pediatric neuroradiology, thoracic imaging, musculoskeletal radiology, mammography, and nuclear cardiology. There are also various medical practitioners who are not radiologists that take on studies in radiology to become sub specialists in their respected fields, an example of this is dentistry where oral and maxillofacial radiology allows those in dentistry to specialize in the acquisition and interpretation of radiographic imaging studies performed for diagnosis of treatment guidance for conditions affecting the maxillofacial region. == Teleultrasound == Teleradiology infrastructure has also been adapted to support point-of-care ultrasound (POCUS) in remote and austere environments. In teleultrasound—also known as telementored ultrasound—a remote expert guides a non-specialist in real time during image acquisition. This technique has been successfully demonstrated in extreme settings, including aboard the International Space Station, on Mount Everest, and during helicopter flight. == Regulations == In the United States, Medicare and Medicaid laws require the teleradiologist to be on U.S. soil in order to qualify for reimbursement of the Final Read. In addition, advanced teleradiology systems must also be HIPAA compliant, which helps to ensure patients' privacy. HIPAA (Health Insurance Portability and Accountability Act of 1996) is a uniform, federal floor of privacy protections for consumers. It limits the ways that entities can use patients' personal information and protects the privacy of all medical information no matter what form it is in. Quality teleradiology must abide by important HIPAA rules to ensure patients' privacy is protected. Also State laws governing the licensing requirements and medical malpractice insurance coverage required for physicians vary from state to state. Ensuring compliance with these laws is a significant overhead expense for larger multi-state teleradiology groups. Medicare (Australia) has identical requirements to that of the United States, where the guidelines are provided by the Department of Health and Ageing, and government based payments fall under the Health Insurance Act. The regulations in Australia are also conducted at both federal and state levels, ensuring that strict guidelines are adhered to at all times, with regular yearly updates and amendments are introduced (usually around March and November of every year), ensuring that the legislation is kept up to date with changes in the industry. One of the most recent changes to Medicare and radiology / teleradiology in Australia was the introduction of the Diagnostic Imaging Accreditation Scheme (DIAS) on 1 July 2008. DIAS was introduced to further improve the quality of Diagnostic Imaging and to amend the Health Insurance Act. == Industry growth == Until the late 1990s teleradiology was primarily used by individual radiologists to interpret occasional emergency studies from offsite locations, often in the radiologists home. The connections were made through standard analog phone lines. Teleradiology expanded rapidly as the growth of the internet and broad band combined with new CT scanner technology to become an essential tool in trauma cases in emergency rooms throughout the country. The occasional 2–3 x-ray studies a week soon became 3–10 CT scans, or more, a night. Because ER physicians are not trained to read CT scans or MRIs, radiologists went from working 8–10 hours a day, five and half days a week to a schedule of 24 hours a day, 7 days a week coverage. This became a particularly acute challenge in smaller rural facilities that only had one solo radiologist with no other to share call. These circumstances spawned a post-dot.com boom of firms and groups that provided medical outsourcing, off-site teleradiology on-call services to hospitals and Radiology Groups around the country. As an example, a teleradiology firm might cover trauma at a hospital in Indiana with doctors based in Texas. Some firms even used overseas doctors in locations like Australia and India. Nighthawk, founded by Paul Berger, was the first to station U.S. licensed radiologists overseas (initially Australia and later Switzerland) to maximize the time zone difference to provide nightcall in U.S. hospitals. Currently, teleradiology firms are facing pricing pressures. Industry consolidation is likely as there are more than 500 of these firms, large and small, throughout the United States.

  Read more →
• 

  Apache Pig

  Apache Pig is a high-level platform for creating programs that run on Apache Hadoop. The language for this platform is called Pig Latin. Pig can execute its Hadoop jobs in MapReduce, Apache Tez, or Apache Spark. Pig Latin abstracts the programming from the Java MapReduce idiom into a notation which makes MapReduce programming high level, similar to that of SQL for relational database management systems. Pig Latin can be extended using user-defined functions (UDFs) which the user can write in Java, Python, JavaScript, Ruby or Groovy and then call directly from the language. == History == Apache Pig was originally developed at Yahoo Research around 2006 for researchers to have an ad hoc way of creating and executing MapReduce jobs on very large data sets. In 2007, it was moved into the Apache Software Foundation. === Naming === Regarding the naming of the Pig programming language, the name was chosen arbitrarily and stuck because it was memorable, easy to spell, and for novelty. The story goes that the researchers working on the project initially referred to it simply as 'the language'. Eventually they needed to call it something. Off the top of his head, one researcher suggested Pig, and the name stuck. It is quirky yet memorable and easy to spell. While some have hinted that the name sounds coy or silly, it has provided us with an entertaining nomenclature, such as Pig Latin for the language, Grunt for the shell, and PiggyBank for the CPAN-like shared repository. == Example == Below is an example of a "Word Count" program in Pig Latin: The above program will generate parallel executable tasks which can be distributed across multiple machines in a Hadoop cluster to count the number of words in a dataset such as all the webpages on the internet. == Pig vs SQL == In comparison to SQL, Pig has a nested relational model, uses lazy evaluation, uses extract, transform, load (ETL), is able to store data at any point during a pipeline, declares execution plans, supports pipeline splits, thus allowing workflows to proceed along DAGs instead of strictly sequential pipelines. On the other hand, it has been argued DBMSs are substantially faster than the MapReduce system once the data is loaded, but that loading the data takes considerably longer in the database systems. It has also been argued RDBMSs offer out of the box support for column-storage, working with compressed data, indexes for efficient random data access, and transaction-level fault tolerance. Pig Latin is procedural and fits very naturally in the pipeline paradigm while SQL is instead declarative. In SQL users can specify that data from two tables must be joined, but not what join implementation to use (You can specify the implementation of JOIN in SQL, thus "... for many SQL applications the query writer may not have enough knowledge of the data or enough expertise to specify an appropriate join algorithm."). Pig Latin allows users to specify an implementation or aspects of an implementation to be used in executing a script in several ways. In effect, Pig Latin programming is similar to specifying a query execution plan, making it easier for programmers to explicitly control the flow of their data processing task. SQL is oriented around queries that produce a single result. SQL handles trees naturally, but has no built in mechanism for splitting a data processing stream and applying different operators to each sub-stream. Pig Latin script describes a directed acyclic graph (DAG) rather than a pipeline. Pig Latin's ability to include user code at any point in the pipeline is useful for pipeline development. If SQL is used, data must first be imported into the database, and then the cleansing and transformation process can begin.

  Read more →
• 

  Plotting algorithms for the Mandelbrot set

  There are many programs and algorithms used to plot the Mandelbrot set and other fractals, some of which are described in fractal-generating software. These programs use a variety of algorithms to determine the color of individual pixels efficiently. == Escape time algorithm == The simplest algorithm for generating a representation of the Mandelbrot set is known as the "escape time" algorithm. A repeating calculation is performed for each x, y point in the plot area and based on the behavior of that calculation, a color is chosen for that pixel. === Unoptimized naïve escape time algorithm === In both the unoptimized and optimized escape time algorithms, the x and y locations of each point are used as starting values in a repeating, or iterating calculation (described in detail below). The result of each iteration is used as the starting values for the next. The values are checked during each iteration to see whether they have reached a critical "escape" condition, or "bailout". If that condition is reached, the calculation is stopped, the pixel is drawn, and the next x, y point is examined. For some starting values, escape occurs quickly, after only a small number of iterations. For starting values very close to but not in the set, it may take hundreds or thousands of iterations to escape. For values within the Mandelbrot set, escape will never occur. The programmer or user must choose how many iterations–or how much "depth"–they wish to examine. The higher the maximal number of iterations, the more detail and subtlety emerge in the final image, but the longer time it will take to calculate the fractal image. Escape conditions can be simple or complex. Because no complex number with a real or imaginary part greater than 2 can be part of the set, a common bailout is to escape when either coefficient exceeds 2. A more computationally complex method that detects escapes sooner, is to compute distance from the origin using the Pythagorean theorem, i.e., to determine the absolute value, or modulus, of the complex number. If this value exceeds 2, or equivalently, when the sum of the squares of the real and imaginary parts exceed 4, the point has reached escape. More computationally intensive rendering variations include the Buddhabrot method, which finds escaping points and plots their iterated coordinates. The color of each point represents how quickly the values reached the escape point. Often black is used to show values that fail to escape before the iteration limit, and gradually brighter colors are used for points that escape. This gives a visual representation of how many cycles were required before reaching the escape condition. To render such an image, the region of the complex plane we are considering is subdivided into a certain number of pixels. To color any such pixel, let c {\displaystyle c} be the midpoint of that pixel. We now iterate the critical point 0 under P c {\displaystyle P_{c}} , checking at each step whether the orbit point has modulus larger than 2. When this is the case, we know that c {\displaystyle c} does not belong to the Mandelbrot set, and we color our pixel according to the number of iterations used to find out. Otherwise, we keep iterating up to a fixed number of steps, after which we decide that our parameter is "probably" in the Mandelbrot set, or at least very close to it, and color the pixel black. In pseudocode, this algorithm would look as follows. The algorithm does not use complex numbers and manually simulates complex-number operations using two real numbers, for those who do not have a complex data type. The program may be simplified if the programming language includes complex-data-type operations. for each pixel (Px, Py) on the screen do x0 := scaled x coordinate of pixel (scaled to lie in the Mandelbrot X scale (-2.00, 0.47)) y0 := scaled y coordinate of pixel (scaled to lie in the Mandelbrot Y scale (-1.12, 1.12)) x := 0.0 y := 0.0 iteration := 0 max_iteration := 1000 while (xx + yy ≤ 22 AND iteration < max_iteration) do xtemp := xx - yy + x0 y := 2xy + y0 x := xtemp iteration := iteration + 1 color := palette[iteration] plot(Px, Py, color) Here, relating the pseudocode to c {\displaystyle c} , z {\displaystyle z} and P c {\displaystyle P_{c}} : z = x + i y {\displaystyle z=x+iy\ } z 2 = x 2 + 2 i x y {\displaystyle z^{2}=x^{2}+2ixy} - y 2 {\displaystyle y^{2}\ } c = x 0 + i y 0 {\displaystyle c=x_{0}+iy_{0}\ } and so, as can be seen in the pseudocode in the computation of x and y: x = R e ⁡ ( z 2 + c ) = x 2 − y 2 + x 0 {\displaystyle x=\mathop {\mathrm {Re} } (z^{2}+c)=x^{2}-y^{2}+x_{0}} and y = I m ⁡ ( z 2 + c ) = 2 x y + y 0 . {\displaystyle y=\mathop {\mathrm {Im} } (z^{2}+c)=2xy+y_{0}.\ } To get colorful images of the set, the assignment of a color to each value of the number of executed iterations can be made using one of a variety of functions (linear, exponential, etc.). One practical way, without slowing down calculations, is to use the number of executed iterations as an entry to a palette initialized at startup. If the color table has, for instance, 500 entries, then the color selection is n mod 500, where n is the number of iterations. === Optimized escape time algorithms === The code in the previous section uses an unoptimized inner while loop for clarity. In the unoptimized version, one must perform five multiplications per iteration. To reduce the number of multiplications the following code for the inner while loop may be used instead: x2:= 0 y2:= 0 w:= 0 while (x2 + y2 ≤ 4 and iteration < max_iteration) do x:= x2 - y2 + x0 y:= w - x2 - y2 + y0 x2:= x x y2:= y y w:= (x + y) (x + y) iteration:= iteration + 1 The above code works via some algebraic simplification of the complex multiplication: ( i y + x ) 2 = − y 2 + 2 i y x + x 2 = x 2 − y 2 + 2 i y x {\displaystyle {\begin{aligned}(iy+x)^{2}&=-y^{2}+2iyx+x^{2}\\&=x^{2}-y^{2}+2iyx\end{aligned}}} Using the above identity, the number of multiplications can be reduced to three instead of five. The above inner while loop can be further optimized by expanding w to w = x 2 + 2 x y + y 2 {\displaystyle w=x^{2}+2xy+y^{2}} Substituting w into y = w − x 2 − y 2 + y 0 {\displaystyle y=w-x^{2}-y^{2}+y_{0}} yields y = 2 x y + y 0 {\displaystyle y=2xy+y_{0}} and hence calculating w is no longer needed. The further optimized pseudocode for the above is: x:= 0 y:= 0 x2:= 0 y2:= 0 while (x2 + y2 ≤ 4 and iteration < max_iteration) do x2:= x x y2:= y y y:= 2 x y + y0 x:= x2 - y2 + x0 iteration:= iteration + 1 Note that in the above pseudocode, 2 x y {\displaystyle 2xy} seems to increase the number of multiplications by 1, but since 2 is the multiplier the code can be optimized via ( x + x ) y {\displaystyle (x+x)y} . == Coloring algorithms == In addition to plotting the set, a variety of algorithms have been developed to efficiently color the set in an aesthetically pleasing way show structures of the data (scientific visualisation) === Histogram coloring === A more complex coloring method involves using a histogram which pairs each pixel with said pixel's maximum iteration count before escape/bailout. This method will equally distribute colors to the same overall area, and, importantly, is independent of the maximum number of iterations chosen. This algorithm has four passes. The first pass involves calculating the iteration counts associated with each pixel (but without any pixels being plotted). These are stored in an array IterationCounts[x][y], where x and y are the x and y coordinates of said pixel on the screen respectively. The first step of the second pass is to create an array NumIterationsPerPixel[n], where the array size n is the maximum iteration count. Next, one must iterate over the array of pixel-iteration count pairs IterationCounts[x][y], and retrieve each pixel's saved iteration count, i, via e.g. i = IterationCounts[x][y]. After each pixel's iteration count i is retrieved, it is necessary to index the NumIterationsPerPixel array at i and increment the indexed value (which is initially zero) -- e.g. NumIterationsPerPixel[i] = NumIterationsPerPixel[i] + 1. for (x = 0; x < width; x++) do for (y = 0; y < height; y++) do i:= IterationCounts[x][y] NumIterationsPerPixel[i]++ The third pass iterates through the NumIterationsPerPixel array and adds up all the stored values, saving them in total. The array index represents the number of pixels that reached that iteration count before bailout. total: = 0 for (i = 0; i < max_iterations; i++) do total += NumIterationsPerPixel[i] After this, the fourth pass begins and all the values in the IterationCounts array are indexed, and, for each iteration count i, associated with each pixel, the count is added to a global sum of all the iteration counts from 1 to i in the NumIterationsPerPixel array . This value is then normalized by dividing the sum by the total value computed earlier. hue[][]:= 0.0 for (x = 0; x < width; x++) do for (y = 0; y < height; y++) do iteration:= Iteration

  Read more →
• 

  Adobe Encore

  Adobe Encore (previously Adobe Encore DVD) was a DVD authoring software tool produced by Adobe Systems and targeted at professional video producers. Video and audio resources could be used in their current format for development, allowing the user to transcode them to MPEG-2 video and Dolby Digital audio upon project completion. DVD menus could be created and edited in Adobe Photoshop using special layering techniques. Adobe Encore did not support writing to a Blu-ray Disc using AVCHD 2.0. Encore is bundled with Adobe Premiere Pro CS6. Adobe Encore CS6 was the last release. While Premiere Pro CC has moved to the Creative Cloud, Encore has now been discontinued. == Licensing == All forms of Adobe Encore used a proprietary licensing system from its developer, Adobe Systems. Versions 1.0 and 1.5 required a separate license fee (rather than making 1.5 available as a free update). Version 3, also known as CS3, was sold only in bundle with Premiere CS3. Encore CS4, CS5, CS5.5 and CS6 were only sold in the Premiere Pro CS4, CS5, CS5.5 and CS6 bundles, respectively. Adobe CC subscribers no longer have access to Adobe Encore CS6. Adobe Encore is not included with Premiere Pro CC. == Functionality == Adobe Encore allowed for creating interactive DVD menus from Photoshop documents, which could be tweaked from within Encore. Video and audio streams could be embedded in the DVD and be made to play when certain elements of the menu are interacted with. It had similar functionality to Adobe Flash and Premiere Pro, due to its ability to both edit video on a timeline and embed interactive content.

  Read more →