AI Email Editor

AI Email Editor — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Image warping

  Image warping is the process of digitally manipulating an image such that any shapes portrayed in the image have been significantly distorted. Warping may be used for correcting image distortion as well as for creative purposes (e.g., morphing). The same techniques are equally applicable to video. While an image can be transformed in various ways, pure warping means that points are mapped to points without changing the colors. This can be based mathematically on any function from (part of) the plane to the plane. If the function is injective the original can be reconstructed. If the function is a bijection any image can be inversely transformed. Some methods are: Images may be distorted through simulation of optical aberrations. Images may be viewed as if they had been projected onto a curved or mirrored surface. (This is often seen in ray traced images.) Images can be partitioned into image polygons and each polygon distorted. Images can be distorted using morphing. The most obvious approach to transforming a digital image is the forward mapping. This applies the transform directly to the source image, typically generating unevenly-spaced points that will then be interpolated to generate the required regularly-spaced pixels. However, for injective transforms reverse mapping is also available. This applies the inverse transform to the target pixels to find the unevenly-spaced locations in the source image that contribute to them. Estimating them from source image pixels will require interpolation of the source image. To work out what kind of warping has taken place between consecutive images, one can use optical flow estimation techniques. == Image warping toolbox == ImWIP is an open-source, image warping tool for modeling deformation and motion in digital images, which contains differentiable image warping operators, together with their exact adjoints and derivatives.

  Read more →
• 

  Mountain car problem

  Mountain Car, a standard testing domain in Reinforcement learning, is a problem in which an under-powered car must drive up a steep hill. Since gravity is stronger than the car's engine, even at full throttle, the car cannot simply accelerate up the steep slope. The car is situated in a valley and must learn to leverage potential energy by driving up the opposite hill before the car is able to make it to the goal at the top of the rightmost hill. The domain has been used as a test bed in various reinforcement learning papers. == Introduction == The mountain car problem, although fairly simple, is commonly applied because it requires a reinforcement learning agent to learn on two continuous variables: position and velocity. For any given state (position and velocity) of the car, the agent is given the possibility of driving left, driving right, or not using the engine at all. In the standard version of the problem, the agent receives a negative reward at every time step when the goal is not reached; the agent has no information about the goal until an initial success. == History == The mountain car problem appeared first in Andrew Moore's PhD thesis (1990). It was later more strictly defined in Singh and Sutton's reinforcement learning paper with eligibility traces. The problem became more widely studied when Sutton and Barto added it to their book Reinforcement Learning: An Introduction (1998). Throughout the years many versions of the problem have been used, such as those which modify the reward function, termination condition, and the start state. == Techniques used to solve mountain car == Q-learning and similar techniques for mapping discrete states to discrete actions need to be extended to be able to deal with the continuous state space of the problem. Approaches often fall into one of two categories, state space discretization or function approximation. === Discretization === In this approach, two continuous state variables are pushed into discrete states by bucketing each continuous variable into multiple discrete states. This approach works with properly tuned parameters but a disadvantage is information gathered from one state is not used to evaluate another state. Tile coding can be used to improve discretization and involves continuous variables mapping into sets of buckets offset from one another. Each step of training has a wider impact on the value function approximation because when the offset grids are summed, the information is diffused. === Function approximation === Function approximation is another way to solve the mountain car. By choosing a set of basis functions beforehand, or by generating them as the car drives, the agent can approximate the value function at each state. Unlike the step-wise version of the value function created with discretization, function approximation can more cleanly estimate the true smooth function of the mountain car domain. === Eligibility traces === One aspect of the problem involves the delay of actual reward. The agent is not able to learn about the goal until a successful completion. Given a naive approach for each trial the car can only backup the reward of the goal slightly. This is a problem for naive discretization because each discrete state will only be backed up once, taking a larger number of episodes to learn the problem. This problem can be alleviated via the mechanism of eligibility traces, which will automatically backup the reward given to states before, dramatically increasing the speed of learning. Eligibility traces can be viewed as a bridge from temporal difference learning methods to Monte Carlo methods. == Technical details == The mountain car problem has undergone many iterations. This section focuses on the standard well-defined version from Sutton (2008). === State variables === Two-dimensional continuous state space. V e l o c i t y = ( − 0.07 , 0.07 ) {\displaystyle Velocity=(-0.07,0.07)} P o s i t i o n = ( − 1.2 , 0.6 ) {\displaystyle Position=(-1.2,0.6)} === Actions === One-dimensional discrete action space. m o t o r = ( l e f t , n e u t r a l , r i g h t ) {\displaystyle motor=(left,neutral,right)} === Reward === For every time step: r e w a r d = − 1 {\displaystyle reward=-1} === Update function === For every time step: A c t i o n = [ − 1 , 0 , 1 ] {\displaystyle Action=[-1,0,1]} V e l o c i t y = V e l o c i t y + ( A c t i o n ) ∗ 0.001 + cos ⁡ ( 3 ∗ P o s i t i o n ) ∗ ( − 0.0025 ) {\displaystyle Velocity=Velocity+(Action)0.001+\cos(3Position)(-0.0025)} P o s i t i o n = P o s i t i o n + V e l o c i t y {\displaystyle Position=Position+Velocity} === Starting condition === Optionally, many implementations include randomness in both parameters to show better generalized learning. P o s i t i o n = − 0.5 {\displaystyle Position=-0.5} V e l o c i t y = 0.0 {\displaystyle Velocity=0.0} === Termination condition === End the simulation when: P o s i t i o n ≥ 0.6 {\displaystyle Position\geq 0.6} == Variations == There are many versions of the mountain car which deviate in different ways from the standard model. Variables that vary include but are not limited to changing the constants (gravity and steepness) of the problem so specific tuning for specific policies become irrelevant and altering the reward function to affect the agent's ability to learn in a different manner. An example is changing the reward to be equal to the distance from the goal, or changing the reward to zero everywhere and one at the goal. Additionally, a 3D mountain car can be used, with a 4D continuous state space.

  Read more →
• 

  Data augmentation

  Data augmentation is a statistical technique which allows maximum likelihood estimation from incomplete data. Data augmentation has important applications in Bayesian analysis, and the technique is widely used in machine learning to reduce overfitting when training machine learning models, achieved by training models on several slightly-modified copies of existing data. == Synthetic oversampling techniques for traditional machine learning == Synthetic Minority Over-sampling Technique (SMOTE) is a method used to address imbalanced datasets in machine learning. In such datasets, the number of samples in different classes varies significantly, leading to biased model performance. For example, in a medical diagnosis dataset with 90 samples representing healthy individuals and only 10 samples representing individuals with a particular disease, traditional algorithms may struggle to accurately classify the minority class. SMOTE rebalances the dataset by generating synthetic samples for the minority class. For instance, if there are 100 samples in the majority class and 10 in the minority class, SMOTE can create synthetic samples by randomly selecting a minority class sample and its nearest neighbors, then generating new samples along the line segments joining these neighbors. This process helps increase the representation of the minority class, improving model performance. == Data augmentation for image classification == When convolutional neural networks grew larger in mid-1990s, there was a lack of data to use, especially considering that some part of the overall dataset should be spared for later testing. It was proposed to perturb existing data with affine transformations to create new examples with the same labels, which were complemented by so-called elastic distortions in 2003, and the technique was widely used as of 2010s. Data augmentation can enhance CNN performance and acts as a countermeasure against CNN profiling attacks. Data augmentation has become fundamental in image classification, enriching training dataset diversity to improve model generalization and performance. The evolution of this practice has introduced a broad spectrum of techniques, including geometric transformations, color space adjustments, and noise injection. === Geometric Transformations === Geometric transformations alter the spatial properties of images to simulate different perspectives, orientations, and scales. Common techniques include: Affine Transformation Rotation: Rotating images by a specified degree to help models recognize objects at various angles. Reflection: Reflecting images horizontally or vertically to introduce variability in orientation. Translation: Shifting images in different directions to teach models positional invariance. Scaling Shear Mapping Cropping: Removing sections of the image to focus on particular features or simulate closer views. Elastic Distortion Morphing within the same class: Generating new samples by applying morphing techniques between two images belonging to the same class, thereby increasing intra-class diversity. === Color Space Transformations === Color space transformations modify the color properties of images, addressing variations in lighting, color saturation, and contrast. Techniques include: Brightness Adjustment: Varying the image's brightness to simulate different lighting conditions. Contrast Adjustment: Changing the contrast to help models recognize objects under various clarity levels. Saturation Adjustment: Altering saturation to prepare models for images with diverse color intensities. Color Jittering: Randomly adjusting brightness, contrast, saturation, and hue to introduce color variability. === Noise Injection === Injecting noise into images simulates real-world imperfections, teaching models to ignore irrelevant variations. Techniques involve: Gaussian Noise: Adding Gaussian noise mimics sensor noise or graininess. Salt and Pepper Noise: Introducing black or white pixels at random simulates sensor dust or dead pixels. == Data augmentation for signal processing == Residual or block bootstrap can be used for time series augmentation. === Biological signals === Synthetic data augmentation is of paramount importance for machine learning classification, particularly for biological data, which tend to be high dimensional and scarce. The applications of robotic control and augmentation in disabled and able-bodied subjects still rely mainly on subject-specific analyses. Data scarcity is notable in signal processing problems such as for Parkinson's Disease Electromyography signals, which are difficult to source - Zanini, et al. noted that it is possible to use a generative adversarial network (in particular, a DCGAN) to perform style transfer in order to generate synthetic electromyographic signals that corresponded to those exhibited by sufferers of Parkinson's Disease. The approaches are also important in electroencephalography (brainwaves). Wang, et al. explored the idea of using deep convolutional neural networks for EEG-Based Emotion Recognition, results show that emotion recognition was improved when data augmentation was used. A common approach is to generate synthetic signals by re-arranging components of real data. Lotte proposed a method of "Artificial Trial Generation Based on Analogy" where three data examples x 1 , x 2 , x 3 {\displaystyle x_{1},x_{2},x_{3}} provide examples and an artificial x s y n t h e t i c {\displaystyle x_{synthetic}} is formed which is to x 3 {\displaystyle x_{3}} what x 2 {\displaystyle x_{2}} is to x 1 {\displaystyle x_{1}} . A transformation is applied to x 1 {\displaystyle x_{1}} to make it more similar to x 2 {\displaystyle x_{2}} , the same transformation is then applied to x 3 {\displaystyle x_{3}} which generates x s y n t h e t i c {\displaystyle x_{synthetic}} . This approach was shown to improve performance of a Linear Discriminant Analysis classifier on three different datasets. Current research shows great impact can be derived from relatively simple techniques. For example, Freer observed that introducing noise into gathered data to form additional data points improved the learning ability of several models which otherwise performed relatively poorly. Tsinganos et al. studied the approaches of magnitude warping, wavelet decomposition, and synthetic surface EMG models (generative approaches) for hand gesture recognition, finding classification performance increases of up to +16% when augmented data was introduced during training. More recently, data augmentation studies have begun to focus on the field of deep learning, more specifically on the ability of generative models to create artificial data which is then introduced during the classification model training process. In 2018, Luo et al. observed that useful EEG signal data could be generated by Conditional Wasserstein Generative Adversarial Networks (GANs) which was then introduced to the training set in a classical train-test learning framework. The authors found classification performance was improved when such techniques were introduced. === Mechanical signals === The prediction of mechanical signals based on data augmentation brings a new generation of technological innovations, such as new energy dispatch, 5G communication field, and robotics control engineering. In 2022, Yang et al. integrate constraints, optimization and control into a deep network framework based on data augmentation and data pruning with spatio-temporal data correlation, and improve the interpretability, safety and controllability of deep learning in real industrial projects through explicit mathematical programming equations and analytical solutions.

  Read more →
• 

  Google Research

  Google Research (also known as Research at Google) is the research division of Google, a subsidiary of Alphabet Inc.. According to its official website, Google Research publishes findings, releases open-source software, and applies research results within Google products and services as well as within the wider scientific community. == Notable contributions == The 2017 landmark paper Attention Is All You Need, which introduced the Transformer architecture, which has subsequently been used to build modern large language models. Advances in neural machine translation powering Google Translate. Time series forecasting. Development of scalable learning systems and infrastructure for large-model training. Flood forecasting. Research into computational discovery via Google Accelerated Science including demonstrating the first below-threshold quantum calculations.

  Read more →
• 

  Predictive text

  Predictive text is an input technology used where one key or button represents many letters, such as on the physical numeric keypads of mobile phones and in accessibility technologies. Each key press results in a prediction rather than repeatedly sequencing through the same group of "letters" it represents, in the same, invariable order. Predictive text could allow for an entire word to be input by a single keypress. Predictive text makes efficient use of fewer device keys to input writing into a text message, an e-mail, an address book, a calendar, and the like. The most widely used, general, predictive text systems are T9, iTap, eZiText, and LetterWise/WordWise. There are many ways to build a device that predicts text, but all predictive text systems have initial linguistic settings that offer predictions that are re-prioritized to adapt to each user. This learning adapts, by way of the device memory, to a user's disambiguating feedback that results in corrective key presses, such as pressing a "next" key to get to the intention. Most predictive text systems have a user database to facilitate this process. Theoretically the number of keystrokes required per desired character in the finished writing is, on average, comparable to using a keyboard. This is approximately true provided that all words used are in its database, punctuation is ignored, and no input mistakes are made when typing or spelling. The theoretical keystrokes per character, KSPC, of a keyboard is KSPC=1.00, and of multi-tap is KSPC=2.03. Eatoni's LetterWise is a predictive multi-tap hybrid, which when operating on a standard telephone keypad achieves KSPC=1.15 for English. The choice of which predictive text system is the best to use involves matching the user's preferred interface style, the user's level of learned ability to operate predictive text software, and the user's efficiency goal. There are various levels of risk in predictive text systems, versus multi-tap systems, because the predicted text that is automatically written provides the speed and mechanical efficiency benefit, which, if the user is not careful to review, results in transmitting misinformation. Predictive text systems take time to learn to use well, and so generally, a device's system has user options to set up the choice of multi-tap or any one of several schools of predictive text methods. == Background == Short message service (SMS) permits a mobile phone user to send text messages (also called messages, SMSes, texts, and txts) as a short message. The most common system of SMS text input is referred to as "multi-tap". Using multi-tap, a key is pressed multiple times to access the list of letters on that key. For instance, pressing the "2" key once displays an "a", twice displays a "b" and three times displays a "c". To enter two successive letters that are on the same key, the user must either pause or hit a "next" button. A user can type by pressing an alphanumeric keypad without looking at the electronic equipment display. Thus, multi-tap is easy to understand and can be used without any visual feedback. However, multi-tap is not very efficient, requiring potentially many keystrokes to enter a single letter. In ideal predictive text entry, all words used are in the dictionary, punctuation is ignored, no spelling mistakes are made, and no typing mistakes are made. The ideal dictionary would include all slang, proper nouns, abbreviations, URLs, foreign-language words and other user-unique words. This ideal circumstance gives predictive text software a reduction in the number of key strokes a user is required to enter a word. The user presses the number corresponding to each letter. As long as the word exists in the predictive text dictionary or is correctly disambiguated by non-dictionary systems, it will appear. For instance, pressing "4663" will typically be interpreted as the word good, provided that a linguistic database in English is currently in use, though alternatives such as home, hood and hoof are also valid interpretations of the sequence of key strokes. The most widely used systems of predictive text are Tegic's T9, Motorola's iTap, and the Eatoni Ergonomics' LetterWise and WordWise. T9 and iTap use dictionaries, but Eatoni Ergonomics' products use a disambiguation process, a set of statistical rules to recreate words from keystroke sequences. All predictive text systems require a linguistic database for every supported input language. == Dictionary vs. non-dictionary systems == Traditional disambiguation works by referencing a dictionary of commonly used words, though Eatoni offers a dictionaryless disambiguation system. In dictionary-based systems, as the user presses the number buttons, an algorithm searches the dictionary for a list of possible words that match the keypress combination and offers up the most probable choice. The user can then confirm the selection and move on, or use a key to cycle through the possible combinations. A non-dictionary system constructs words and other sequences of letters from the statistics of word parts. To attempt predictions of the intended result of keystrokes not yet entered, disambiguation may be combined with a word completion facility. Either system (disambiguation or predictive) may include a user database, which can be further classified as a "learning" system when words or phrases are entered into the user database without direct user intervention. The user database is for storing words or phrases that are not well disambiguated by the pre-supplied database. Some disambiguation systems further attempt to correct spelling, format text or perform other automatic rewrites, with the risky effect of either enhancing or frustrating user efforts to enter text. == History == The predictive text and autocomplete technology was invented out of necessities by Chinese scientists and linguists in the 1950s to solve the input inefficiency of the Chinese typewriter, as the typing process involved finding and selecting thousands of logographic characters on a tray, drastically slowing down the word processing speed. The actuating keys of the Chinese typewriter created by Lin Yutang in the 1940s included suggestions for the characters following the one selected. In 1951, the Chinese typesetter Zhang Jiying arranged Chinese characters in associative clusters, a precursor of modern predictive text entry, and broke speed records by doing so. Predictive entry of text from a telephone keypad has been known at least since the 1970s (Smith and Goodwin, 1971). Predictive text was mainly used to look up names in directories over the phone until mobile phone text messaging came into widespread use. == Example == On a typical phone keypad, if users wished to type the in a "multi-tap" keypad entry system, they would need to: Press 8 (tuv) once to select t. Press 4 (ghi) twice to select h. Press 3 (def) twice to select e. Meanwhile, in a phone with predictive text, they need only: Press 8 once to select the (tuv) group for the first character. Press 4 once to select the (ghi) group for the second character. Press 3 once to select the (def) group for the third character. The system updates the display as each keypress is entered, to show the most probable entry. In this example, prediction reduced the number of button presses from five to three. The effect is even greater with longer words and those composed of letters later in each key's sequence. A dictionary-based predictive system is based on the hope that the desired word is in the dictionary. That hope may be misplaced if the word differs in any way from common usage—in particular, if the word is not spelled or typed correctly, is slang, or is a proper noun. In these cases, some other mechanism must be used to enter the word. Furthermore, the simple dictionary approach fails with agglutinative languages, where a single word does not necessarily represent a single semantic entity. == Companies and products == Predictive text is developed and marketed in a variety of competing products, such as Nuance Communications's T9. Other products include Motorola's iTap; Eatoni Ergonomic's LetterWise (character, rather than word-based prediction); WordWise (word-based prediction without a dictionary); EQ3 (a QWERTY-like layout compatible with regular telephone keypads); Prevalent Devices's Phraze-It; Xrgomics' TenGO (a six-key reduced QWERTY keyboard system); Adaptxt (considers language, context, grammar and semantics); Lightkey (a predictive typing software for Windows); Clevertexting (statistical nature of the language, dictionaryless, dynamic key allocation); and Oizea Type (temporal ambiguity); Intelab's Tauto; WordLogic's Intelligent Input Platform™ (patented, layer-based advanced text prediction, includes multi-language dictionary, spell-check, built-in Web search); Google's Gboard. == Textonyms == Words produced by the same combination of keypresses have been called "textonyms"; also "txtonyms"; or "T9o

  Read more →
• 

  AI nationalism

  AI nationalism is the idea that nations should develop and control their own artificial intelligence technologies to advance their own interests and ensure technological sovereignty. This concept is gaining traction globally, leading countries to implement new laws, form strategic alliances, and invest significantly in domestic AI capabilities. == Global trends and national strategies == In 2018, British technology investor Ian Hogarth published an influential essay titled AI Nationalism. He argued that as AI gains more power and its economic and military significance expands, governments will take measures to bolster their own domestic AI industries, and predicted that the advancement of machine learning systems would lead to what he termed "AI nationalism." He anticipated that this rise in AI would accelerate a global arms race, resulting in more closed economies, restrictions on foreign acquisitions, and limitations on the movement of talent. Hogarth predicted that AI policy would become a central focus of government agendas. He also criticized Britain’s approach to AI strategy, citing the sale of London-based DeepMind—one of the leading AI laboratories, acquired by Google for a relatively modest £400 million in 2014—as a significant misstep. AI nationalism is chiefly reflected in the escalating rhetoric of an artificial intelligence arms race, portraying AI development as a zero-sum game where the winner gains significant economic, political, and military advantages. This mindset, as highlighted in a 2017 Pentagon report, warns that sharing AI technology could erode technological supremacy and enhance rivals' capabilities. The winner-takes-all mentality of AI nationalism poses risks including unsafe AI development, increased geopolitical tension, and potential military aggression (such as cyberattacks or targeting AI professionals). Several countries, including Canada, France, and India, have formulated national strategies to advance their positions in AI. In the United States, a leading player in the global AI arena, trade policies have been enacted to restrict China's access to critical microchips, reflecting a strategic effort to maintain a technological edge. The United States’ National Security Commission on Artificial Intelligence (NSCAI) frames AI development as a critical aspect of a broader technology competition crucial for national success. It emphasizes the need to outpace China in AI to maintain strategic advantage, reflecting AI nationalism by linking geopolitical power directly to advancements in AI. France has seen notable governmental support for local AI startups, particularly those specializing in language technologies that cater to French and other non-English languages. In Saudi Arabia, Crown Prince Mohammed bin Salman is investing billions in AI research and development. The country has actively collaborated with major technology firms such as Amazon, IBM, and Microsoft to establish itself as a prominent AI hub. == Historical and cultural context == AI nationalism is seen as deeply connected to historical racism and imperialism. It is viewed not merely as a technological competition but as a contest over racial and civilizational superiority. Historically, technological achievements were often used to justify colonialism and racial hierarchies, with Western societies perceiving their advancements as evidence of superiority. In the context of AI, this historical context continues to shape views on intelligence and development. Some argue that AI nationalism reinforces the idea of fundamental civilizational divides, especially between the Western world and China. This perspective often frames China's progress in AI as a direct challenge to Western values, presenting the AI competition as a struggle over values. AI nationalism is said to draw from long-standing anti-Asian stereotypes, such as the "Yellow Peril," which portray Asian nations as threats to Western civilization. This viewpoint links Asian technological advances with dehumanization and artificiality, reflecting persistent anxieties about China's growing role in the global tech landscape. == Implications == AI nationalism is seen as a component of a broader trend towards the fragmentation of the internet, where digital services are increasingly influenced by local regulations and national interests. This shift is creating a new technological landscape in which the impact of artificial intelligence on individuals' lives can vary significantly depending on their geographic location. J. Paul Goode argues that AI nationalism may exacerbate existing societal divisions by promoting the development of systems that embed cultural biases, thereby privileging certain groups while disadvantaging others.

  Read more →
• 

  AI literacy

  AI literacy or artificial intelligence literacy is "a set of competencies that enables individuals to critically evaluate AI technologies; communicate and collaborate effectively with AI; and use AI as a tool online, at home, and in the workplace." AI is employed in a variety of applications, including self-driving automobiles, virtual assistants and text generation by generative AI models. Users of these tools should be able to make informed decisions. AI literacy may have an impact on students' future employment prospects. With the rise of generative AI platforms, AI literacy has become a topic of conversation in the field of education. Some think AI literacy is essential for school and college students, while others restrict or prohibit the use of AI in assignments, viewing it as a form of academic dishonesty. However, many researchers and educational institutions promote a more nuanced approach, encouraging critical engagement with AI while developing policies that balance academic integrity with opportunities for learning. == Definitions == Other definitions of AI literacy include the ability to understand, use, monitor, and critically reflect on AI applications. That use of the term usually refers to teaching skills and knowledge to the general public, particularly those who are not adept in AI and the ability to understand, use, evaluate, and ethically navigate AI. As research into AI literacy is still emerging and focused on developing context-specific skills, there is not yet a single, broadly agreed-upon definition. AI literacy is linked to other forms of literacy. AI literacy requires digital literacy, whereas scientific and computational literacy may inform it. Data literacy also significantly overlaps with it. == Categories == AI literacy encompasses multiple categories, including a theoretical understanding of how artificial intelligence works, the usage of artificial intelligence technologies, and the critical appraisal of artificial intelligence, and its ethics. === Know and understand AI === Knowledge and understanding of AI refers to a basic understanding of what artificial intelligence is and how it works. This includes familiarity with machine learning algorithms and the limitations and biases present in AI systems. Users who know and understand AI should be familiar with various technologies that use artificial intelligence, including cognitive systems, robotics and machine learning. This includes recognizing that large language models (LLMs) are machine learning models trained on extensive datasets which generate new text rather than retrieving pre-written responses. === Use and apply AI === Using and applying AI refers to the ability to use AI tools to solve problems and perform tasks such as programming and analyzing big data. Some consider prompt engineering, the practice of designing effective prompts to guide generative AI platforms more effectively, as another competency within AI literacy. === Evaluate and create AI === Evaluation and creation refers to the ability to critically evaluate the quality and reliability of AI systems. It also refers to designing and building fair and ethical AI systems. To evaluate correctly, users should also learn in which areas AI is strong, and in which areas it is weak. === AI ethics === AI ethics refers to understanding the moral implications of AI, and the making informed decisions regarding the use of AI tools. This area includes considerations such as: Accountability: Hold AI actors accountable for the operation of AI systems and adherence to ethical ideals. Accuracy: Identify and report sources of error and uncertainty in algorithms and data. Auditability: Enable other parties to audit and assess algorithm behavior via transparent information sharing. Explainability: Make sure that algorithmic judgments and the underlying data can be presented in simple language. Fairness: Prevent biases and consider varied viewpoints. To do so, increase the diversity of researchers in the field. Human Centricity and Well-being: Prioritize human well-being in AI development and deployment. Human rights Alignment: Ensure that technology do not infringe internationally recognized human rights. Inclusivity: Make AI accessible to everyone. Progress: Choose high value initiatives. Responsibility, accountability, and transparency: Foster trust via responsibility, accountability, and fairness. Robustness and Security: Make AI systems safe, secure, and resistant to manipulation or data breach. Sustainability: Choose implementations that generate long-term, useful benefits. Environmental Implications: How this tool impacts the environment, any restrictions or laws, if this impact is worth the effects or not. === Enabling AI === Support AI by developing associated knowledge and skills such as programming and statistics. == Promoting AI literacy == Several governments have recognized the need to promote AI literacy, including among adults. Such programs have been published in the United States, China, Germany and Finland. Programs intended for the general public usually consist of short and easy to understand online study units. Programs intended for children are usually project-based. Programs for students at colleges and universities often address the specific professional needs of the student, depending on their field of study. Beyond the education system, AI literacy can also be developed in the community, for example in museums. === Schools === Schools use diverse pedagogies to promote AI literacy. These include: Performing a Turing test with an intelligent agent Creating chatbots Building apps using Blockly-based programming Project-based learning Building robots Data visualization Training AI models Artificial intelligence curricula can improve students' understanding of topics such as machine learning, neural networks, and deep learning. === Higher education === Before the second decade of the 21st century, artificial intelligence was studied mainly in STEM courses. Later, projects emerged to increase artificial intelligence education, specifically to promote AI literacy. Most courses start with one or more study units that deal with basic questions such as what artificial intelligence is, where it comes from, what it can do and what it can't do. Most courses also refer to machine learning and deep learning. Some of the courses deal with moral issues in artificial intelligence. In Ireland, the Higher Education Authority published Generative AI in Higher Education Teaching & Learning: Policy Framework in December 2025, which encouraged higher education institutions to embed AI literacy across programmes as a core graduate attribute. ==== Disciplinary policy ==== As a response to the increase of generative AI use in education, several disciplines formed committees or task forces to examine context-specific approaches toward AI literacy. In spring 2025, the Modern Language Association and Conference on College Composition and Communication Joint Task Force finished development of three working papers, a guide on AI literacy for students, and a collection of resources addressing AI use in writing. The task force emphasized the need for "a culture of critical AI literacy" and included guidelines not only for students but also educators and institutions, highlighting the need for modeling ethical AI use in planning processes. Similarly, a committee formed by the American Historical Association Council published "Guiding Principles for Artificial Intelligence in History Education" which encouraged "clear and transparent engagement with generative AI." The guidelines demonstrate the value of criticality when working with generative AI in thinking and research.

  Read more →
• 

  Wetware computer

  A wetware computer is an organic computer (which can also be known as an artificial organic brain or a neurocomputer) composed of organic material "wetware" such as "living" neurons. Wetware computers composed of neurons are different than conventional computers because they use biological materials, and offer the possibility of substantially more energy-efficient computing. While a wetware computer is still largely conceptual, there has been limited success with construction and prototyping, which has acted as a proof of the concept's realistic application to computing in the future. The most notable prototypes have stemmed from the research completed by biological engineer William Ditto during his time at the Georgia Institute of Technology. His work constructing a simple neurocomputer capable of basic addition from leech neurons in 1999 was a significant discovery for the concept. This research was a primary example driving interest in creating these artificially constructed, but still organic brains. == Origins and theoretical foundations == The term wetware came from cyberpunk fiction, notably through Gibson's Neuromancer, but was quickly taken up in scientific literature to explain computation by biological material. Theories of early biological computation borrowed from Alan Turing's morphogenesis model, which showed that chemical interactions could produce complex patterns without centralized control. Hopfield's associative memory networks also provided a foundation for biological information systems with fault tolerance and self-organization. == Major characteristics and processes == Biological wetware systems demonstrate dynamic reconfigurability underpinned by neuroplasticity and enable continuous learning and adaptation. Reaction-diffusion-based computing and molecular logic gates allow spatially parallel information processing unachievable in conventional systems. These systems also show fault tolerance and self-repair at the cellular and network level. The development of cerebral organoids—miniature lab-grown brains—demonstrates spontaneous learning behavior and suggests biological tissue as a viable computational substrate. == Overview == The concept of wetware is an application of specific interest to the field of computer manufacturing. Moore's law, which states that the number of transistors which can be placed on a silicon chip is doubled roughly every two years, has acted as a goal for the industry for decades, but as the size of computers continues to decrease, the ability to meet this goal has become more difficult, threatening to reach a plateau. Due to the difficulty in reducing the size of computers because of size limitations of transistors and integrated circuits, wetware provides an unconventional alternative. A wetware computer composed of neurons is an ideal concept because, unlike conventional materials which operate in binary (on/off), a neuron can shift between thousands of states, constantly altering its chemical conformation, and redirecting electrical pulses through over 200,000 channels in any of its many synaptic connections. Because of this large difference in the possible settings for any one neuron, compared to the binary limitations of conventional computers, the space limitations are far fewer. == Background == The concept of wetware is distinct and unconventional and draws slight resonance with both hardware and software from conventional computers. While hardware is understood as the physical architecture of traditional computational devices, comprising integrated circuits and supporting infrastructure, software represents the encoded architecture of storage and instructions. Wetware is a separate concept that uses the formation of organic molecules, mostly complex cellular structures (such as neurons), to create a computational device such as a computer. In wetware, the ideas of hardware and software are intertwined and interdependent. The molecular and chemical composition of the organic or biological structure would represent not only the physical structure of the wetware but also the software, being continually reprogrammed by the discrete shifts in electrical pulses and chemical concentration gradients as the molecules change their structures to communicate signals. The responsiveness of a cell, proteins, and molecules to changing conformations, both within their structures and around them, ties the idea of internal programming and external structure together in a way that is alien to the current model of conventional computer architecture. The structure of wetware represents a model where the external structure and internal programming are interdependent and unified; meaning that changes to the programming or internal communication between molecules of the device would represent a physical change in the structure. The dynamic nature of wetware borrows from the function of complex cellular structures in biological organisms. The combination of "hardware" and "software" into one dynamic, and interdependent system which uses organic molecules and complexes to create an unconventional model for computational devices is a specific example of applied biorobotics. === The cell as a model of wetware === Cells in many ways can be seen as their form of naturally occurring wetware, similar to the concept that the human brain is the preexisting model system for complex wetware. In his book Wetware: A Computer in Every Living Cell (2009) Dennis Bray explains his theory that cells, which are the most basic form of life, are just a highly complex computational structure, like a computer. To simplify one of his arguments a cell can be seen as a type of computer, using its structured architecture. In this architecture, much like a traditional computer, many smaller components operate in tandem to receive input, process the information, and compute an output. In an overly simplified, non-technical analysis, cellular function can be broken into the following components: Information and instructions for execution are stored as DNA in the cell, RNA acts as a source for distinctly encoded input, processed by ribosomes and other transcription factors to access and process the DNA and to output a protein. Bray's argument in favor of viewing cells and cellular structures as models of natural computational devices is important when considering the more applied theories of wetware to biorobotics. === Biorobotics === Wetware and biorobotics are closely related concepts, which both borrow from similar overall principles. A biorobotic structure can be defined as a system modeled from a preexisting organic complex or model such as cells (neurons) or more complex structures like organs (brain) or whole organisms. Unlike wetware, the concept of biorobotics is not always a system composed of organic molecules, but instead could be composed of conventional material which is designed and assembled in a structure similar or derived from a biological model. Biorobotics have many applications and are used to address the challenges of conventional computer architecture. Conceptually, designing a program, robot, or computational device after a preexisting biological model such as a cell, or even a whole organism, provides the engineer or programmer the benefits of incorporating into the structure the evolutionary advantages of the model. == Effects on users == Wetware technologies such as BCIs and neuromorphic chips offer new possibilities for user autonomy. For those with disabilities, such systems could restore motor or sensory functions and enhance quality of life. However, these technologies raise ethical questions: cognitive privacy, consent over biological data, and risk of exploitation. Without proper oversight, wetware technologies may also widen inequality, favoring those with access to cognitive enhancements. Open governance frameworks and ethical AI design grounded in neuro ethics will be essential. With the development of wetware devices, disparities in access could exacerbate social inequalities, benefiting those who have resources to enhance cognitive or physical abilities. It is necessary to create strong ethical frameworks, inclusive development practices, and open systems of governance to reduce risks and make sure that wetware advances are beneficial to all segments of society. == Applications and goals == === Basic neurocomputer composed of leech neurons === In 1999 William Ditto and his team of researchers at Georgia Institute of Technology and Emory University created a basic form of a wetware computer capable of simple addition by harnessing leech neurons. Leeches were used as a model organism due to the large size of their neuron, and the ease associated with their collection and manipulation. However, these results have never been published in a peer-reviewed journal, prompting questions about the validity of the claims. The computer was able to complete basic addition through electrical probes

  Read more →
• 

  Apps to analyse COVID-19 sounds

  Apps to analyse COVID-19 sounds are mobile software applications designed to collect respiratory sounds and aid diagnosis in response to the COVID-19 pandemic. Numerous applications are in development, with different institutions and companies taking various approaches to privacy and data collection. Current efforts are aimed at gathering data. In a later stage, it is possible that sound apps will have the capacity (and ethical approvals) to provide information back to users. In order to develop and train signal analysis approaches, large datasets are required. == History == The COVID-19 outbreak was announced as a global pandemic by the World Health Organization in March 2020 and has affected a growing number of people globally. In this context, advanced artificial intelligence techniques are being considered as tools in aiding our response to global health crisis. Other COVID-19 apps which offer solutions for user tracking have been developed. At the same time a number of approaches which tries to use respiratory sounds and artificial intelligence to understand if the disease can be diagnosed have been proposed. A few studies are available as preprints (i.e. not yet peer-reviewed) documents. == Methodologies == The potential for using speech and sound analysis by artificial intelligence to help in this scenario, by surveying which types of related or contextually significant phenomena can be automatically assessed from speech or sound has been recently overviewed. These include the automatic recognition and monitoring of breathing, dry and wet coughing or sneezing sounds, speech under cold, eating behaviour, sleepiness, or pain. Additionally, the potential use-cases of intelligent speech analysis for COVID-19 diagnosed patients has also been presented. In particular, by analysing speech recordings from these patients, an audio-only-based model to automatically categorise the health state of patients from four aspects, including the severity of illness, sleep quality, fatigue, and anxiety, is constructed. This work shows promise in estimating the severity of illness. Machine learning methods have been explored to recognize and diagnose coughs from different diseases. These included a low complexity, automated recognition and diagnostic tool for screening respiratory infections that utilizes convolutional neural networks (CNNs) to detect cough within environment audio and diagnose three potential illnesses (i.e. bronchitis, bronchiolitis and pertussis) based on their unique cough audio features. A large-scale crowdsourced dataset of respiratory sounds has been collected to aid diagnosis of COVID-19: coughs and breathing sounds are sufficient to distinguish users affected by COVID-19 versus those affected by asthma or healthy controls. Behind these studies is the ambition that automated systems to screen for respiratory diseases based on voice, raw cough or other sound data would have positive medical applications in both clinical and public health arenas. == List of apps to analyse COVID-19 sounds ==

  Read more →
• 

  Artificial intelligence of things

  Artificial Intelligence of Things (AIoT) is the combination of artificial intelligence (AI) technologies with the Internet of things (IoT) infrastructure to create systems capable of sensing, learning, and acting on data without continuous human intervention. While IoT focuses on connectivity and sensor data collection, AI enables IoT devices to analyse data in real time and produce actionable outputs, including automated decisions at the edge. == Applications == === Manufacturing and predictive maintenance === Manufacturing accounts for the largest share of AIoT adoption by industry vertical. A common application is predictive maintenance, where sensors measuring vibration, temperature, current draw, and acoustic emissions feed machine learning models trained to detect signatures that precede equipment failure. These systems can flag developing faults weeks or months in advance, and in more advanced deployments can autonomously adjust machine parameters such as motor speed or cooling cycles to delay or prevent failure. === Other industries === In healthcare, AIoT enables remote patient monitoring through wearable devices that collect vital signs and apply AI models to detect anomalies or predict deterioration. In logistics, GPS and telematics sensors combined with AI models support real-time route optimisation, vehicle maintenance prediction, and fuel cost forecasting. Smart building systems use occupancy, temperature, and energy sensors with AI to dynamically adjust HVAC and lighting, reducing energy consumption. == Architecture == AIoT systems typically operate across three layers: a device layer of sensors and actuators that collect data, a connectivity layer that transmits data via protocols such as MQTT or HTTP, and a compute layer where AI models process the data either in the cloud or at the edge. The trend toward edge-based processing, where inference runs on low-cost processors near the data source rather than in a centralised cloud, has accelerated as hardware costs have fallen and applications increasingly require sub-second response times. == Market == Market sizing estimates for AIoT vary significantly depending on scope and definition. Fortune Business Insights valued the AIoT market at USD 35.65 billion in 2023, projecting growth to USD 253.86 billion by 2030 at a compound annual growth rate of 32.4%. Grand View Research estimated the broader market at USD 171.4 billion in 2024 with a CAGR of 31.7% through 2030, reflecting a wider definition that includes AI-integrated hardware components. North America accounted for approximately 40% of global market share in 2024, with the Asia-Pacific region projected as the fastest-growing market.

  Read more →
• 

  AI nationalism

  AI nationalism is the idea that nations should develop and control their own artificial intelligence technologies to advance their own interests and ensure technological sovereignty. This concept is gaining traction globally, leading countries to implement new laws, form strategic alliances, and invest significantly in domestic AI capabilities. == Global trends and national strategies == In 2018, British technology investor Ian Hogarth published an influential essay titled AI Nationalism. He argued that as AI gains more power and its economic and military significance expands, governments will take measures to bolster their own domestic AI industries, and predicted that the advancement of machine learning systems would lead to what he termed "AI nationalism." He anticipated that this rise in AI would accelerate a global arms race, resulting in more closed economies, restrictions on foreign acquisitions, and limitations on the movement of talent. Hogarth predicted that AI policy would become a central focus of government agendas. He also criticized Britain’s approach to AI strategy, citing the sale of London-based DeepMind—one of the leading AI laboratories, acquired by Google for a relatively modest £400 million in 2014—as a significant misstep. AI nationalism is chiefly reflected in the escalating rhetoric of an artificial intelligence arms race, portraying AI development as a zero-sum game where the winner gains significant economic, political, and military advantages. This mindset, as highlighted in a 2017 Pentagon report, warns that sharing AI technology could erode technological supremacy and enhance rivals' capabilities. The winner-takes-all mentality of AI nationalism poses risks including unsafe AI development, increased geopolitical tension, and potential military aggression (such as cyberattacks or targeting AI professionals). Several countries, including Canada, France, and India, have formulated national strategies to advance their positions in AI. In the United States, a leading player in the global AI arena, trade policies have been enacted to restrict China's access to critical microchips, reflecting a strategic effort to maintain a technological edge. The United States’ National Security Commission on Artificial Intelligence (NSCAI) frames AI development as a critical aspect of a broader technology competition crucial for national success. It emphasizes the need to outpace China in AI to maintain strategic advantage, reflecting AI nationalism by linking geopolitical power directly to advancements in AI. France has seen notable governmental support for local AI startups, particularly those specializing in language technologies that cater to French and other non-English languages. In Saudi Arabia, Crown Prince Mohammed bin Salman is investing billions in AI research and development. The country has actively collaborated with major technology firms such as Amazon, IBM, and Microsoft to establish itself as a prominent AI hub. == Historical and cultural context == AI nationalism is seen as deeply connected to historical racism and imperialism. It is viewed not merely as a technological competition but as a contest over racial and civilizational superiority. Historically, technological achievements were often used to justify colonialism and racial hierarchies, with Western societies perceiving their advancements as evidence of superiority. In the context of AI, this historical context continues to shape views on intelligence and development. Some argue that AI nationalism reinforces the idea of fundamental civilizational divides, especially between the Western world and China. This perspective often frames China's progress in AI as a direct challenge to Western values, presenting the AI competition as a struggle over values. AI nationalism is said to draw from long-standing anti-Asian stereotypes, such as the "Yellow Peril," which portray Asian nations as threats to Western civilization. This viewpoint links Asian technological advances with dehumanization and artificiality, reflecting persistent anxieties about China's growing role in the global tech landscape. == Implications == AI nationalism is seen as a component of a broader trend towards the fragmentation of the internet, where digital services are increasingly influenced by local regulations and national interests. This shift is creating a new technological landscape in which the impact of artificial intelligence on individuals' lives can vary significantly depending on their geographic location. J. Paul Goode argues that AI nationalism may exacerbate existing societal divisions by promoting the development of systems that embed cultural biases, thereby privileging certain groups while disadvantaging others.

  Read more →
• 

  Machine-learned interatomic potential

  Machine-learned interatomic potentials (MLIPs), or simply machine learning potentials (MLPs), are interatomic potentials constructed using machine learning. Beginning in the 1990s, researchers have employed such programs to construct interatomic potentials by mapping atomic structures to their potential energies. These potentials are referred to as MLIPs or MLPs. Such machine learning potentials promised to fill the gap between density functional theory, a highly accurate but computationally intensive modelling method, and empirically derived or intuitively-approximated potentials, which were far lighter computationally but substantially less accurate. Improvements in artificial intelligence technology heightened the accuracy of MLPs while lowering their computational cost, increasing the role of machine learning in fitting potentials. Machine learning potentials began by using neural networks to tackle low-dimensional systems. While promising, these models could not systematically account for interatomic energy interactions; they could be applied to small molecules in a vacuum, or molecules interacting with frozen surfaces, but not much else – and even in these applications, the models often relied on force fields or potentials derived empirically or with simulations. These models thus remained confined to academia. Modern neural networks construct highly accurate and computationally light potentials, as theoretical understanding of materials science was increasingly built into their architectures and preprocessing. Almost all are local, accounting for all interactions between an atom and its neighbor up to some cutoff radius. There exist some nonlocal models, but these have been experimental for almost a decade. For most systems, reasonable cutoff radii enable highly accurate results. Almost all neural networks intake atomic coordinates and output potential energies. For some, these atomic coordinates are converted into atom-centered symmetry functions. From this data, a separate atomic neural network is trained for each element; each atomic network is evaluated whenever that element occurs in the given structure, and then the results are pooled together at the end. This process – in particular, the atom-centered symmetry functions which convey translational, rotational, and permutational invariances – has greatly improved machine learning potentials by significantly constraining the neural network search space. Other models use a similar process but emphasize bonds over atoms, using pair symmetry functions and training one network per atom pair. Other models to learn their own descriptors rather than using predetermined symmetry-dictating functions. These models, called message-passing neural networks (MPNNs), are graph neural networks. Treating molecules as three-dimensional graphs (where atoms are nodes and bonds are edges), the model takes feature vectors describing the atoms as input, and iteratively updates these vectors as information about neighboring atoms is processed through message functions and convolutions. These feature vectors are then used to predict the final potentials. The flexibility of this method often results in stronger, more generalizable models. In 2017, the first-ever MPNN model (a deep tensor neural network) was used to calculate the properties of small organic molecules. == Gaussian Approximation Potential (GAP) == One popular class of machine-learned interatomic potential is the Gaussian Approximation Potential (GAP), which combines compact descriptors of local atomic environments with Gaussian process regression to machine learn the potential energy surface of a given system. To date, the GAP framework has been used to successfully develop a number of MLIPs for various systems, including for elemental systems such as carbon, silicon, phosphorus, and tungsten, as well as for multicomponent systems such as Ge2Sb2Te5 and austenitic stainless steel, Fe7Cr2Ni. == Equivariant graph neural networks == A significant limitation of early MPNNs was that they were not inherently equivariant to rotations and reflections of atomic structures — meaning predictions could change depending on how a molecule was oriented in space. Beginning around 2021, a new class of models addressed this by incorporating equivariance directly into the message-passing layers using spherical harmonics and irreducible representations. Notable examples include NequIP (2021), MACE (2022), and GemNet-OC (2022). These equivariant architectures proved substantially more data-efficient and accurate than their predecessors, and became the dominant paradigm for high-accuracy MLIPs. == Universal MLIPs and large-scale datasets == Early MLIPs were system-specific, trained on a few thousand structures of a single material. A major shift occurred with the creation of large, chemically diverse datasets enabling models that generalize across many elements, bonding environments, and application domains — so-called universal MLIPs. A key driver was the Open Catalyst Project (OC20, OC22), a collaboration between Meta AI (FAIR) and Carnegie Mellon University launched in 2020. OC20 comprises approximately 1.3 million DFT relaxations across 82 elements, designed to accelerate the discovery of catalysts for renewable energy applications. It was among the first datasets large enough to train GNNs that generalize across diverse chemical systems, and established a widely-used benchmark for the field. A subsequent dataset, Open Direct Air Capture (OpenDAC 2023 and OpenDAC 2025), applied the same approach to carbon capture, providing a large computational database of metal-organic frameworks and sorbent candidates evaluated for CO₂ capture, generated using nearly 400 million CPU hours of quantum chemistry calculations in collaboration with Georgia Tech. These datasets revealed a new challenge: the GNN architectures most effective for atomic simulations were memory-intensive, as they model higher-order interactions between triplets or quadruplets of atoms, making it difficult to scale model size. Graph Parallelism, introduced by Sriram et al. (ICLR 2022), addressed this by distributing a single input graph across multiple GPUs — a distinct strategy from data parallelism (which distributes training examples) or model parallelism (which distributes layers). This enabled training GNNs with hundreds of millions to billions of parameters for the first time. Building on these foundations, Meta FAIR released the Universal Model for Atoms (UMA) in 2025, trained on approximately 500 million unique 3D atomic structures spanning molecules, materials, and catalysts — the largest training run to date for an MLIP. UMA introduced a Mixture of Linear Experts (MoLE) architecture, enabling one model to learn from datasets generated by different DFT codes and settings without significant inference overhead. It matches or surpasses specialized models across catalysis, materials, and molecular benchmarks without task-specific fine-tuning, and has been described as marking a "pre/post-UMA" divide in the field. == Applications == Catalyst discovery: MLIPs have significantly accelerated the computational screening of heterogeneous catalysts by replacing expensive DFT relaxations with fast neural network surrogates. The Open Catalyst Project explicitly targets this application, aiming to identify new catalysts for green hydrogen production and other renewable energy reactions. Carbon capture: The OpenDAC project applies universal MLIPs to screening sorbent materials for direct air capture of CO₂, a key technology for climate change mitigation. AI-accelerated screening allows evaluation of orders of magnitude more candidate materials than traditional DFT workflows. Drug discovery and molecular design: MLIPs are increasingly used in pharmaceutical research to model molecular conformations and binding energies. The Open Molecules 2025 (OMol25) dataset, released by Meta FAIR in 2025, provides high-accuracy calculations for a large set of molecular systems to support this use case. Materials discovery: Universal MLIPs enable high-throughput screening of novel inorganic materials, including battery electrolytes, semiconductors, and superconductors, by rapidly estimating stability and properties across large chemical spaces.

  Read more →
• 

  Question answering

  Question answering (QA) is a computer science discipline within the fields of information retrieval and natural language processing (NLP) that is concerned with building systems that automatically answer questions that are posed by humans in a natural language. A question-answering implementation, usually a computer program, may construct its answers by querying a structured database of knowledge or information, usually a knowledge base. More commonly, question-answering systems can pull answers from an unstructured collection of natural language documents. Some examples of natural language document collections used for question answering systems include reference texts, compiled newswire reports, Wikipedia pages and other World Wide Web pages. == History == Two early question answering systems were BASEBALL and LUNAR. BASEBALL answered questions about Major League Baseball over a period of one year. LUNAR answered questions about the geological analysis of rocks returned by the Apollo Moon missions. Both question answering systems were very effective in their chosen domains. LUNAR was demonstrated at a lunar science convention in 1971 and it was able to answer 90% of the questions in its domain that were posed by people untrained on the system. Further restricted-domain question answering systems were developed in the following years. The common feature of all these systems is that they had a core database or knowledge system that was hand-written by experts of the chosen domain. The language abilities of BASEBALL and LUNAR used techniques similar to ELIZA and DOCTOR, the first chatterbot programs. SHRDLU was a successful question-answering program developed by Terry Winograd in the late 1960s and early 1970s. It simulated the operation of a robot in a toy world (the "blocks world"), and it offered the possibility of asking the robot questions about the state of the world. The strength of this system was the choice of a very specific domain and a very simple world with rules of physics that were easy to encode in a computer program. In the 1970s, knowledge bases were developed that targeted narrower domains of knowledge. The question answering systems developed to interface with these expert systems produced more repeatable and valid responses to questions within an area of knowledge. These expert systems closely resembled modern question answering systems except in their internal architecture. Expert systems rely heavily on expert-constructed and organized knowledge bases, whereas many modern question answering systems rely on statistical processing of a large, unstructured, natural language text corpus. The 1970s and 1980s saw the development of comprehensive theories in computational linguistics, which led to the development of ambitious projects in text comprehension and question answering. One example was the Unix Consultant (UC), developed by Robert Wilensky at U.C. Berkeley in the late 1980s. The system answered questions pertaining to the Unix operating system. It had a comprehensive, hand-crafted knowledge base of its domain, and it aimed at phrasing the answer to accommodate various types of users. Another project was LILOG, a text-understanding system that operated on the domain of tourism information in a German city. The systems developed in the UC and LILOG projects never went past the stage of simple demonstrations, but they helped the development of theories on computational linguistics and reasoning. Specialized natural-language question answering systems have been developed, such as EAGLi for health and life scientists. Question answering systems have been extended in recent years to encompass additional domains of knowledge For example, systems have been developed to automatically answer temporal and geospatial questions, questions of definition and terminology, biographical questions, multilingual questions, and questions about the content of audio, images, and video. Current question answering research topics include: interactivity—clarification of questions or answers answer reuse or caching semantic parsing answer presentation knowledge representation and semantic entailment social media analysis with question answering systems sentiment analysis utilization of thematic roles Image captioning for visual question answering Embodied question answering In 2011, Watson, a question answering computer system developed by IBM, competed in two exhibition matches of Jeopardy! against Brad Rutter and Ken Jennings, winning by a significant margin. Facebook Research made their DrQA system available under an open source license. This system uses Wikipedia as knowledge source. The open source framework Haystack by deepset combines open-domain question answering with generative question answering and supports the domain adaptation of the underlying language models for industry use cases. Large Language Models (LLMs)[36] like GPT-4[37], Gemini[38] are examples of successful QA systems that are enabling more sophisticated understanding and generation of text. When coupled with Multimodal[39] QA Systems, which can process and understand information from various modalities like text, images, and audio, LLMs significantly improve the capabilities of QA systems. == Types == Question-answering research attempts to develop ways of answering a wide range of question types, including fact, list, definition, how, why, hypothetical, semantically constrained, and cross-lingual questions. Answering questions related to an article in order to evaluate reading comprehension is one of the simpler form of question answering, since a given article is relatively short compared to the domains of other types of question-answering problems. An example of such a question is "What did Albert Einstein win the Nobel Prize for?" after an article about this subject is given to the system. Closed-book question answering is when a system has memorized some facts during training and can answer questions without explicitly being given a context. This is similar to humans taking closed-book exams. Closed-domain question answering deals with questions under a specific domain (for example, medicine or automotive maintenance) and can exploit domain-specific knowledge frequently formalized in ontologies. Alternatively, "closed-domain" might refer to a situation where only a limited type of questions are accepted, such as questions asking for descriptive rather than procedural information. Question answering systems in the context of machine reading applications have also been constructed in the medical domain, for instance related to Alzheimer's disease. Open-domain question answering deals with questions about nearly anything and can only rely on general ontologies and world knowledge. Systems designed for open-domain question answering usually have much more data available from which to extract the answer. An example of an open-domain question is "What did Albert Einstein win the Nobel Prize for?" while no article about this subject is given to the system. Another way to categorize question-answering systems is by the technical approach used. There are a number of different types of QA systems, including: rule-based systems, statistical systems, and hybrid systems. Rule-based systems use a set of rules to determine the correct answer to a question. Statistical systems use statistical methods to find the most likely answer to a question. Hybrid systems use a combination of rule-based and statistical methods. == Architecture == As of 2001, question-answering systems typically included a question classifier module that determined the type of question and the type of answer. Different types of question-answering systems employ different architectures. For example, modern open-domain question answering systems may use a retriever-reader architecture. The retriever is aimed at retrieving relevant documents related to a given question, while the reader is used to infer the answer from the retrieved documents. Systems such as GPT-3, T5, and BART use an end-to-end architecture in which a transformer-based architecture stores large-scale textual data in the underlying parameters. Such models can answer questions without accessing any external knowledge sources. == Methods == Question answering is dependent on a good search corpus; without documents containing the answer, there is little any question answering system can do. Larger collections generally mean better question answering performance, unless the question domain is orthogonal to the collection. Data redundancy in massive collections, such as the web, means that nuggets of information are likely to be phrased in many different ways in differing contexts and documents, leading to two benefits: If the right information appears in many forms, the question answering system needs to perform fewer complex NLP techniques to understand the text. Correct answers can be filtered from false positives because the syst

  Read more →
• 

  Outline of machine learning

  The following outline is provided as an overview of, and topical guide to, machine learning: Machine learning (ML) is a subfield of artificial intelligence within computer science that evolved from the study of pattern recognition and computational learning theory. In 1959, Arthur Samuel defined machine learning as a "field of study that gives computers the ability to learn without being explicitly programmed". ML involves the study and construction of algorithms that can learn from and make predictions on data. These algorithms operate by building a model from a training set of example observations to make data-driven predictions or decisions expressed as outputs, rather than following strictly static program instructions. == How can machine learning be categorized? == An academic discipline A branch of science An applied science A subfield of computer science A branch of artificial intelligence A subfield of soft computing Application of statistics === Paradigms of machine learning === Supervised learning, where the model is trained on labeled data Unsupervised learning, where the model tries to identify patterns in unlabeled data Reinforcement learning, where the model learns to make decisions by receiving rewards or penalties. == Applications of machine learning == Applications of machine learning Bioinformatics Biomedical informatics Computer vision Customer relationship management Data mining Earth sciences Email filtering Inverted pendulum (balance and equilibrium system) Natural language processing Named Entity Recognition Automatic summarization Automatic taxonomy construction Dialog system Grammar checker Language recognition Handwriting recognition Optical character recognition Speech recognition Text to Speech Synthesis Speech Emotion Recognition Machine translation Question answering Speech synthesis Text mining Term frequency–inverse document frequency Text simplification Pattern recognition Facial recognition system Handwriting recognition Image recognition Optical character recognition Speech recognition Recommendation system Collaborative filtering Content-based filtering Hybrid recommender systems Search engine Search engine optimization Social engineering == Machine learning hardware == Graphics processing unit Tensor processing unit Vision processing unit == Machine learning tools == Comparison of machine learning software Comparison of deep learning software === Machine learning frameworks === ==== Proprietary machine learning frameworks ==== Amazon Machine Learning Microsoft Azure Machine Learning Studio DistBelief (replaced by TensorFlow) ==== Open source machine learning frameworks ==== Apache Singa Apache MXNet Caffe PyTorch mlpack TensorFlow Torch CNTK Accord.Net Jax MLJ.jl – A machine learning framework for Julia === Machine learning libraries === Deeplearning4j Theano scikit-learn Keras === Machine learning algorithms === == Machine learning methods == === Instance-based algorithm === K-nearest neighbors algorithm (KNN) Learning vector quantization (LVQ) Self-organizing map (SOM) === Regression analysis === Logistic regression Ordinary least squares regression (OLSR) Linear regression Stepwise regression Multivariate adaptive regression splines (MARS) Regularization algorithm Ridge regression Least Absolute Shrinkage and Selection Operator (LASSO) Elastic net Least-angle regression (LARS) Classifiers Probabilistic classifier Naive Bayes classifier Binary classifier Linear classifier Hierarchical classifier === Dimensionality reduction === Dimensionality reduction Canonical correlation analysis (CCA) Factor analysis Feature extraction Feature selection Independent component analysis (ICA) Linear discriminant analysis (LDA) Multidimensional scaling (MDS) Non-negative matrix factorization (NMF) Partial least squares regression (PLSR) Principal component analysis (PCA) Principal component regression (PCR) Projection pursuit Sammon mapping t-distributed stochastic neighbor embedding (t-SNE) === Ensemble learning === Ensemble learning AdaBoost Boosting Bootstrap aggregating (also "bagging" or "bootstrapping") Ensemble averaging Gradient boosted decision tree (GBDT) Gradient boosting Random Forest Stacked Generalization === Meta-learning === Meta-learning Inductive bias Metadata === Reinforcement learning === Reinforcement learning Q-learning State–action–reward–state–action (SARSA) Temporal difference learning (TD) Learning Automata === Supervised learning === Supervised learning Averaged one-dependence estimators (AODE) Artificial neural network Case-based reasoning Gaussian process regression Gene expression programming Group method of data handling (GMDH) Inductive logic programming Instance-based learning Lazy learning Learning Automata Learning Vector Quantization Logistic Model Tree Minimum message length (decision trees, decision graphs, etc.) Nearest Neighbor Algorithm Analogical modeling Probably approximately correct learning (PAC) learning Ripple down rules, a knowledge acquisition methodology Symbolic machine learning algorithms Support vector machines Random Forests Ensembles of classifiers Bootstrap aggregating (bagging) Boosting (meta-algorithm) Ordinal classification Conditional Random Field ANOVA Quadratic classifiers k-nearest neighbor Boosting SPRINT Bayesian networks Naive Bayes Hidden Markov models Hierarchical hidden Markov model ==== Bayesian ==== Bayesian statistics Bayesian knowledge base Naive Bayes Gaussian Naive Bayes Multinomial Naive Bayes Averaged One-Dependence Estimators (AODE) Bayesian Belief Network (BBN) Bayesian Network (BN) ==== Decision tree algorithms ==== Decision tree algorithm Decision tree Classification and regression tree (CART) Iterative Dichotomiser 3 (ID3) C4.5 algorithm C5.0 algorithm Chi-squared Automatic Interaction Detection (CHAID) Decision stump Conditional decision tree ID3 algorithm Random forest SLIQ ==== Linear classifier ==== Linear classifier Fisher's linear discriminant Linear regression Logistic regression Multinomial logistic regression Naive Bayes classifier Perceptron Support vector machine === Unsupervised learning === Unsupervised learning Expectation-maximization algorithm Vector Quantization Generative topographic map Information bottleneck method Association rule learning algorithms Apriori algorithm Eclat algorithm ==== Artificial neural networks ==== Artificial neural network Feedforward neural network Extreme learning machine Convolutional neural network Recurrent neural network Long short-term memory (LSTM) Logic learning machine Self-organizing map ==== Association rule learning ==== Association rule learning Apriori algorithm Eclat algorithm FP-growth algorithm ==== Hierarchical clustering ==== Hierarchical clustering Single-linkage clustering Conceptual clustering ==== Cluster analysis ==== Cluster analysis BIRCH DBSCAN Expectation–maximization (EM) Fuzzy clustering Hierarchical clustering k-means clustering k-medians Mean-shift OPTICS algorithm ==== Anomaly detection ==== Anomaly detection k-nearest neighbors algorithm (k-NN) Local outlier factor === Semi-supervised learning === Semi-supervised learning Active learning Generative models Low-density separation Graph-based methods Co-training Transduction === Deep learning === Deep learning Deep belief networks Deep Boltzmann machines Deep Convolutional neural networks Deep Recurrent neural networks Hierarchical temporal memory Generative Adversarial Network Style transfer Transformer Stacked Auto-Encoders === Other machine learning methods and problems === Anomaly detection Association rules Bias-variance dilemma Classification Multi-label classification Clustering Data Pre-processing Empirical risk minimization Feature engineering Feature learning Learning to rank Occam learning Online machine learning PAC learning Regression Reinforcement Learning Semi-supervised learning Statistical learning Structured prediction Graphical models Bayesian network Conditional random field (CRF) Hidden Markov model (HMM) Unsupervised learning VC theory == Machine learning research == List of artificial intelligence projects List of datasets for machine learning research == History of machine learning == History of machine learning Timeline of machine learning == Machine learning projects == Machine learning projects: DeepMind Google Brain OpenAI Meta AI Hugging Face == Machine learning organizations == === Machine learning conferences and workshops === Artificial Intelligence and Security (AISec) (co-located workshop with CCS) Conference on Neural Information Processing Systems (NIPS) ECML PKDD International Conference on Machine Learning (ICML) ML4ALL (Machine Learning For All) == Machine learning publications == === Books on machine learning === Mathematics for Machine Learning Hands-On Machine Learning Scikit-Learn, Keras, and TensorFlow The Hundred-Page Machine Learning Book === Machine learning journals === Machine Learning Journal of Machine Learning Research (JMLR) Neural Computation == Pe

  Read more →
• 

  Web intelligence

  Web intelligence is the area of scientific research and development that explores the roles and makes use of artificial intelligence and information technology for new products, services and frameworks that are empowered by the World Wide Web. The term was coined in a paper written by Ning Zhong, Jiming Liu Yao and Y.Y. Ohsuga in the Computer Software and Applications Conference in 2000. == Research == The research about the web intelligence covers many fields – including data mining (in particular web mining), information retrieval, pattern recognition, predictive analytics, the semantic web, web data warehousing – typically with a focus on web personalization and adaptive websites.

  Read more →