AI Email Response Generator Free

AI Email Response Generator Free — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Neural network Gaussian process

    Neural network Gaussian process

    A Neural Network Gaussian Process (NNGP) is a Gaussian process (GP) obtained as the limit of a certain type of sequence of neural networks. Specifically, a wide variety of network architectures converges to a GP in the infinitely wide limit, in the sense of distribution. The concept constitutes an intensional definition, i.e., a NNGP is just a GP, but distinguished by how it is obtained. == Motivation == Bayesian networks are a modeling tool for assigning probabilities to events, and thereby characterizing the uncertainty in a model's predictions. Deep learning and artificial neural networks are approaches used in machine learning to build computational models which learn from training examples. Bayesian neural networks merge these fields. They are a type of neural network whose parameters and predictions are both probabilistic. While standard neural networks often assign high confidence even to incorrect predictions, Bayesian neural networks can more accurately evaluate how likely their predictions are to be correct. Computation in artificial neural networks is usually organized into sequential layers of artificial neurons. The number of neurons in a layer is called the layer width. When we consider a sequence of Bayesian neural networks with increasingly wide layers (see figure), they converge in distribution to a NNGP. This large width limit is of practical interest, since the networks often improve as layers get wider. And the process may give a closed form way to evaluate networks. NNGPs also appears in several other contexts: It describes the distribution over predictions made by wide non-Bayesian artificial neural networks after random initialization of their parameters, but before training; it appears as a term in neural tangent kernel prediction equations; it is used in deep information propagation to characterize whether hyperparameters and architectures will be trainable. It is related to other large width limits of neural networks. === Scope === The first correspondence result had been established in the 1995 PhD thesis of Radford M. Neal, then supervised by Geoffrey Hinton at University of Toronto. Neal cites David J. C. MacKay as inspiration, who worked in Bayesian learning. Today the correspondence is proven for: Single hidden layer Bayesian neural networks; deep fully connected networks as the number of units per layer is taken to infinity; convolutional neural networks as the number of channels is taken to infinity; transformer networks as the number of attention heads is taken to infinity; recurrent networks as the number of units is taken to infinity. In fact, this NNGP correspondence holds for almost any architecture: Generally, if an architecture can be expressed solely via matrix multiplication and coordinatewise nonlinearities (i.e., a tensor program), then it has an infinite-width GP. This in particular includes all feedforward or recurrent neural networks composed of multilayer perceptron, recurrent neural networks (e.g., LSTMs, GRUs), (nD or graph) convolution, pooling, skip connection, attention, batch normalization, and/or layer normalization. === Illustration === Every setting of a neural network's parameters θ {\displaystyle \theta } corresponds to a specific function computed by the neural network. A prior distribution p ( θ ) {\displaystyle p(\theta )} over neural network parameters therefore corresponds to a prior distribution over functions computed by the network. As neural networks are made infinitely wide, this distribution over functions converges to a Gaussian process for many architectures. The notation used in this section is the same as the notation used below to derive the correspondence between NNGPs and fully connected networks, and more details can be found there. The figure to the right plots the one-dimensional outputs z L ( ⋅ ; θ ) {\displaystyle z^{L}(\cdot ;\theta )} of a neural network for two inputs x {\displaystyle x} and x ∗ {\displaystyle x^{}} against each other. The black dots show the function computed by the neural network on these inputs for random draws of the parameters from p ( θ ) {\displaystyle p(\theta )} . The red lines are iso-probability contours for the joint distribution over network outputs z L ( x ; θ ) {\displaystyle z^{L}(x;\theta )} and z L ( x ∗ ; θ ) {\displaystyle z^{L}(x^{};\theta )} induced by p ( θ ) {\displaystyle p(\theta )} . This is the distribution in function space corresponding to the distribution p ( θ ) {\displaystyle p(\theta )} in parameter space, and the black dots are samples from this distribution. For infinitely wide neural networks, since the distribution over functions computed by the neural network is a Gaussian process, the joint distribution over network outputs is a multivariate Gaussian for any finite set of network inputs. == Discussion == === Infinitely wide fully connected network === This section expands on the correspondence between infinitely wide neural networks and Gaussian processes for the specific case of a fully connected architecture. It provides a proof sketch outlining why the correspondence holds, and introduces the specific functional form of the NNGP for fully connected networks. The proof sketch closely follows the approach by Novak and coauthors. ==== Network architecture specification ==== Consider a fully connected artificial neural network with inputs x {\displaystyle x} , parameters θ {\displaystyle \theta } consisting of weights W l {\displaystyle W^{l}} and biases b l {\displaystyle b^{l}} for each layer l {\displaystyle l} in the network, pre-activations (pre-nonlinearity) z l {\displaystyle z^{l}} , activations (post-nonlinearity) y l {\displaystyle y^{l}} , pointwise nonlinearity ϕ ( ⋅ ) {\displaystyle \phi (\cdot )} , and layer widths n l {\displaystyle n^{l}} . For simplicity, the width n L + 1 {\displaystyle n^{L+1}} of the readout vector z L {\displaystyle z^{L}} is taken to be 1. The parameters of this network have a prior distribution p ( θ ) {\displaystyle p(\theta )} , which consists of an isotropic Gaussian for each weight and bias, with the variance of the weights scaled inversely with layer width. This network is illustrated in the figure to the right, and described by the following set of equations: x ≡ input y l ( x ) = { x l = 0 ϕ ( z l − 1 ( x ) ) l > 0 z i l ( x ) = ∑ j W i j l y j l ( x ) + b i l W i j l ∼ N ( 0 , σ w 2 n l ) b i l ∼ N ( 0 , σ b 2 ) ϕ ( ⋅ ) ≡ nonlinearity y l ( x ) , z l − 1 ( x ) ∈ R n l × 1 n L + 1 = 1 θ = { W 0 , b 0 , … , W L , b L } {\displaystyle {\begin{aligned}x&\equiv {\text{input}}\\y^{l}(x)&=\left\{{\begin{array}{lcl}x&&l=0\\\phi \left(z^{l-1}(x)\right)&&l>0\end{array}}\right.\\z_{i}^{l}(x)&=\sum _{j}W_{ij}^{l}y_{j}^{l}(x)+b_{i}^{l}\\W_{ij}^{l}&\sim {\mathcal {N}}\left(0,{\frac {\sigma _{w}^{2}}{n^{l}}}\right)\\b_{i}^{l}&\sim {\mathcal {N}}\left(0,\sigma _{b}^{2}\right)\\\phi (\cdot )&\equiv {\text{nonlinearity}}\\y^{l}(x),z^{l-1}(x)&\in \mathbb {R} ^{n^{l}\times 1}\\n^{L+1}&=1\\\theta &=\left\{W^{0},b^{0},\dots ,W^{L},b^{L}\right\}\end{aligned}}} ==== ==== z l | y l {\displaystyle z^{l}|y^{l}} is a Gaussian process We first observe that the pre-activations z l {\displaystyle z^{l}} are described by a Gaussian process conditioned on the preceding activations y l {\displaystyle y^{l}} . This result holds even at finite width. Each pre-activation z i l {\displaystyle z_{i}^{l}} is a weighted sum of Gaussian random variables, corresponding to the weights W i j l {\displaystyle W_{ij}^{l}} and biases b i l {\displaystyle b_{i}^{l}} , where the coefficients for each of those Gaussian variables are the preceding activations y j l {\displaystyle y_{j}^{l}} . Because they are a weighted sum of zero-mean Gaussians, the z i l {\displaystyle z_{i}^{l}} are themselves zero-mean Gaussians (conditioned on the coefficients y j l {\displaystyle y_{j}^{l}} ). Since the z l {\displaystyle z^{l}} are jointly Gaussian for any set of y l {\displaystyle y^{l}} , they are described by a Gaussian process conditioned on the preceding activations y l {\displaystyle y^{l}} . The covariance or kernel of this Gaussian process depends on the weight and bias variances σ w 2 {\displaystyle \sigma _{w}^{2}} and σ b 2 {\displaystyle \sigma _{b}^{2}} , as well as the second moment matrix K l {\displaystyle K^{l}} of the preceding activations y l {\displaystyle y^{l}} , z i l ∣ y l ∼ G P ( 0 , σ w 2 K l + σ b 2 ) K l ( x , x ′ ) = 1 n l ∑ i y i l ( x ) y i l ( x ′ ) {\displaystyle {\begin{aligned}z_{i}^{l}\mid y^{l}&\sim {\mathcal {GP}}\left(0,\sigma _{w}^{2}K^{l}+\sigma _{b}^{2}\right)\\K^{l}(x,x')&={\frac {1}{n^{l}}}\sum _{i}y_{i}^{l}(x)y_{i}^{l}(x')\end{aligned}}} The effect of the weight scale σ w 2 {\displaystyle \sigma _{w}^{2}} is to rescale the contribution to the covariance matrix from K l {\displaystyle K^{l}} , while the bias is shared for all inputs, and so σ b 2 {\displaystyle \sigma _{b}^{2}} makes the z i l {\displaystyle z_{i}^{l}} for different datapoints more similar and

    Read more →
  • Ultra (cryptography)

    Ultra (cryptography)

    Ultra was the designation adopted by British military intelligence in June 1941 for wartime signals intelligence obtained by breaking high-level encrypted enemy radio and teleprinter communications at the Government Code and Cypher School (GC&CS) at Bletchley Park. Ultra eventually became the standard designation among the western Allies for all such intelligence. The name arose because the intelligence obtained was considered more important than that designated by the highest British security classification then used (Most Secret) and so was regarded as being Ultra Secret. Several other cryptonyms had been used for such intelligence. The code name "Boniface" was used as a cover name for Ultra. In order to ensure that the successful code-breaking did not become apparent to the Germans, British intelligence created a fictional MI6 master spy, Boniface, who controlled a fictional series of agents throughout Germany. Information obtained through code-breaking was often attributed to the human intelligence from the Boniface network. The U.S. used the codename Magic for its decrypts from Japanese sources, including the "Purple" cipher. Much of the German cipher traffic was encrypted on the Enigma machine. Used properly, the German military Enigma would have been virtually unbreakable; in practice, shortcomings in operation allowed it to be broken. The term "Ultra" has often been used almost synonymously with "Enigma decrypts". However, Ultra also encompassed decrypts of the German Lorenz SZ 40/42 machines that were used by the German High Command, and the Hagelin machine. Many observers, at the time and later, regarded Ultra as immensely valuable to the Allies. Winston Churchill was reported to have told King George VI, when presenting to him Stewart Menzies (head of the Secret Intelligence Service and the person who controlled distribution of Ultra decrypts to the government): "It is thanks to the secret weapon of General Menzies, put into use on all the fronts, that we won the war!" F. W. Winterbotham quoted the western Supreme Allied Commander, Dwight D. Eisenhower, at war's end describing Ultra as having been "decisive" to Allied victory. Sir Harry Hinsley, Bletchley Park veteran and official historian of British Intelligence in World War II, made a similar assessment of Ultra, saying that while the Allies would have won the war without it, "the war would have been something like two years longer, perhaps three years longer, possibly four years longer than it was." However, Hinsley and others have emphasized the difficulties of counterfactual history in attempting such conclusions, and some historians, such as John Keegan, have said the shortening might have been as little as the three months it took the United States to deploy the atomic bomb. == Sources of intelligence == Most Ultra intelligence was derived from reading radio messages that had been encrypted with cipher machines, complemented by material from radio communications using traffic analysis and direction finding. In the early phases of the war, particularly during the eight-month Phoney War, the Germans could transmit most of their messages using land lines and so had no need to use radio. This meant that those at Bletchley Park had some time to build up experience of collecting and starting to decrypt messages on the various radio networks. German Enigma messages were the main source, with those of the German air force (the Luftwaffe) predominating, as they used radio more and their operators were particularly ill-disciplined. === German === ==== Enigma ==== "Enigma" refers to a family of electro-mechanical rotor cipher machines. These produced a polyalphabetic substitution cipher and were widely thought to be unbreakable in the 1920s, when a variant of the commercial Model D was first used by the Reichswehr. The German Army (Heer), Navy, Air Force, Nazi party, Gestapo and German diplomats used Enigma machines in several variants. Abwehr (German military intelligence) used a four-rotor machine without a plugboard and Naval Enigma used different key management from that of the army or air force, making its traffic far more difficult to cryptanalyse; each variant required different cryptanalytic treatment. The commercial versions were not as secure and Dilly Knox of GC&CS is said to have broken one before the war. German military Enigma was first broken in December 1932 by Marian Rejewski and the Polish Cipher Bureau, using a combination of brilliant mathematics, the services of a spy in the German office responsible for administering encrypted communications, and good luck. The Poles read Enigma to the outbreak of World War II and beyond, in France. At the turn of 1939, the Germans made the systems ten times more complex, which required a tenfold increase in Polish decryption equipment, which they could not meet. On 25 July 1939, the Polish Cipher Bureau handed reconstructed Enigma machines and their techniques for decrypting ciphers to the French and British. Gordon Welchman wrote, Ultra would never have got off the ground if we had not learned from the Poles, in the nick of time, the details both of the German military Enigma machine, and of the operating procedures that were in use. At Bletchley Park, some of the key people responsible for success against Enigma included mathematicians Alan Turing and Hugh Alexander and, at the British Tabulating Machine Company, chief engineer Harold Keen. After the war, interrogation of German cryptographic personnel led to the conclusion that German cryptanalysts understood that cryptanalytic attacks against Enigma were possible but were thought to require impracticable amounts of effort and investment. The Poles' early start at breaking Enigma and the continuity of their success gave the Allies an advantage when World War II began. ==== Lorenz cipher ==== In June 1941, the Germans started to introduce on-line stream cipher teleprinter systems for strategic point-to-point radio links, to which the British gave the code-name Fish. Several systems were used, principally the Lorenz SZ 40/42 (codenamed "Tunny" by the British) and Geheimfernschreiber ("Sturgeon"). These cipher systems were cryptanalysed, particularly Tunny, which the British thoroughly penetrated. It was eventually attacked using Colossus machines, which were the first digital programme-controlled electronic computers. In many respects the Tunny work was more difficult than for the Enigma, since the British codebreakers had no knowledge of the machine producing it and no head-start such as that the Poles had given them against Enigma. Although the volume of intelligence derived from this system was much smaller than that from Enigma, its importance was often far higher because it produced primarily high-level, strategic intelligence that was sent between Wehrmacht high command (Oberkommando der Wehrmacht, OKW). The eventual bulk decryption of Lorenz-enciphered messages contributed significantly, and perhaps decisively, to the defeat of Nazi Germany. Nevertheless, the Tunny story has become much less well known among the public than the Enigma one. At Bletchley Park, some of the key people responsible for success in the Tunny effort included mathematicians W. T. "Bill" Tutte and Max Newman and electrical engineer Tommy Flowers. === Italian === In June 1940, the Italians were using book codes for most of their military messages, except for the Italian Navy, which in early 1941 had started using a version of the Hagelin rotor-based cipher machine C-38. This was broken from June 1941 onwards by the Italian subsection of GC&CS at Bletchley Park. === Japanese === In the Pacific theatre, a Japanese cipher machine, called "Purple" by the Americans, was used for highest-level Japanese diplomatic traffic. It produced a polyalphabetic substitution cipher, but unlike Enigma, was not a rotor machine, being built around electrical stepping switches. It was broken by the US Army Signal Intelligence Service and disseminated as Magic. Detailed reports by the Japanese ambassador to Germany were encrypted on the Purple machine. His reports included reviews of German assessments of the military situation, reviews of strategy and intentions, reports on direct inspections by the ambassador (in one case, of Normandy beach defences), and reports of long interviews with Hitler. The Japanese are said to have obtained an Enigma machine in 1937, although it is debated whether they were given it by the Germans or bought a commercial version, which, apart from the plugboard and internal wiring, was the German Heer/Luftwaffe machine. Having developed a similar machine, the Japanese did not use the Enigma machine for their most secret communications. The chief fleet communications code system used by the Imperial Japanese Navy was called JN-25 by the Americans, and by early 1942 the US Navy had made considerable progress in decrypting Japanese naval messages. The US Army also made progress on the

    Read more →
  • Tokenization (data security)

    Tokenization (data security)

    Tokenization, when applied to data security, is the process of substituting a sensitive data element with a non-sensitive equivalent, referred to as a token, that has no intrinsic or exploitable meaning or value. The token is a reference (i.e. identifier) that maps back to the sensitive data through a tokenization system. The mapping from original data to a token uses methods that render tokens infeasible to reverse in the absence of the tokenization system, for example using tokens created from random numbers. A one-way cryptographic function is used to convert the original data into tokens, making it difficult to recreate the original data without obtaining entry to the tokenization system's resources. To deliver such services, the system maintains a vault database of tokens that are connected to the corresponding sensitive data. Protecting the system vault is vital to the system, and improved processes must be put in place to offer database integrity and physical security. The tokenization system must be secured and validated using security best practices applicable to sensitive data protection, secure storage, audit, authentication and authorization. The tokenization system provides data processing applications with the authority and interfaces to request tokens, or detokenize back to sensitive data. The security and risk reduction benefits of tokenization require that the tokenization system is logically isolated and segmented from data processing systems and applications that previously processed or stored sensitive data replaced by tokens. Only the tokenization system can tokenize data to create tokens, or detokenize back to redeem sensitive data under strict security controls. The token generation method must be proven to have the property that there is no feasible means through direct attack, cryptanalysis, side channel analysis, token mapping table exposure or brute force techniques to reverse tokens back to live data. Replacing live data with tokens in systems is intended to minimize exposure of sensitive data to those applications, stores, people and processes, reducing risk of compromise or accidental exposure and unauthorized access to sensitive data. Applications can operate using tokens instead of live data, with the exception of a small number of trusted applications explicitly permitted to detokenize when strictly necessary for an approved business purpose. Tokenization systems may be operated in-house within a secure isolated segment of the data center, or as a service from a secure service provider. Tokenization may be used to safeguard sensitive data involving, for example, bank accounts, financial statements, medical records, criminal records, driver's licenses, loan applications, stock trades, voter registrations, and other types of personally identifiable information (PII). Tokenization is often used in credit card processing. The PCI Council defines tokenization as "a process by which the primary account number (PAN) is replaced with a surrogate value called a token. A PAN may be linked to a reference number through the tokenization process. In this case, the merchant simply has to retain the token and a reliable third party controls the relationship and holds the PAN. The token may be created independently of the PAN, or the PAN can be used as part of the data input to the tokenization technique. The communication between the merchant and the third-party supplier must be secure to prevent an attacker from intercepting to gain the PAN and the token. De-tokenization is the reverse process of redeeming a token for its associated PAN value. The security of an individual token relies predominantly on the infeasibility of determining the original PAN knowing only the surrogate value". The choice of tokenization as an alternative to other techniques such as encryption will depend on varying regulatory requirements, interpretation, and acceptance by respective auditing or assessment entities. This is in addition to any technical, architectural or operational constraint that tokenization imposes in practical use. == Concepts and origins == The concept of tokenization, as adopted by the industry today, has existed since the first currency systems emerged centuries ago as a means to reduce risk in handling high value financial instruments by replacing them with surrogate equivalents. In the physical world, coin tokens have a long history of use replacing the financial instrument of minted coins and banknotes. In more recent history, subway tokens and casino chips found adoption for their respective systems to replace physical currency and cash handling risks such as theft. Exonumia and scrip are terms synonymous with such tokens. In the digital world, similar substitution techniques have been used since the 1970s as a means to isolate real data elements from exposure to other data systems. In databases for example, surrogate key values have been used since 1976 to isolate data associated with the internal mechanisms of databases and their external equivalents for a variety of uses in data processing. More recently, these concepts have been extended to consider this isolation tactic to provide a security mechanism for the purposes of data protection. In the payment card industry, tokenization is one means of protecting sensitive cardholder data in order to comply with industry standards and government regulations. Tokenization was applied to payment card data by Shift4 Corporation and released to the public during an industry Security Summit in Las Vegas, Nevada in 2005. The technology is meant to prevent the theft of the credit card information in storage. Shift4 defines tokenization as: "The concept of using a non-decryptable piece of data to represent, by reference, sensitive or secret data. In payment card industry (PCI) context, tokens are used to reference cardholder data that is managed in a tokenization system, application or off-site secure facility." To protect data over its full lifecycle, tokenization is often combined with end-to-end encryption to secure data in transit to the tokenization system or service, with a token replacing the original data on return. For example, to avoid the risks of malware stealing data from low-trust systems such as point of sale (POS) systems, as in the Target breach of 2013, cardholder data encryption must take place prior to card data entering the POS and not after. Encryption takes place within the confines of a security hardened and validated card reading device and data remains encrypted until received by the processing host, an approach pioneered by Heartland Payment Systems as a means to secure payment data from advanced threats, now widely adopted by industry payment processing companies and technology companies. The PCI Council has also specified end-to-end encryption (certified point-to-point encryption—P2PE) for various service implementations in various PCI Council Point-to-point Encryption documents. == The tokenization process == The process of tokenization consists of the following steps: The application sends the tokenization data and authentication information to the tokenization system. It is stopped if authentication fails and the data is delivered to an event management system. As a result, administrators can discover problems and effectively manage the system. The system moves on to the next phase if authentication is successful. Using one-way cryptographic or random generation techniques, a token is generated and kept in a highly secure data vault. The new token is provided to the application for further use, replacing the sensitive data for processing and storage. Tokenization systems share several components according to established standards. Token generation is the process of producing a token using any means, such as one-way nonreversible cryptographic functions (e.g., a hash function with a strong, secret salt) or assignment via a randomly generated number. Random number generator (RNG) techniques are often the best choice for generating token values. Token mapping – this is the process of assigning the created token value to its original value. To enable permitted look-ups of the original value using the token as the index, a secure cross-reference database must be constructed. Token data store – this is a central repository for the token mapping process that holds the original sensitive values and their related token values. Sensitive data and token values must be securely kept in an encrypted format. Management of cryptographic keys. Strong key management procedures are required for sensitive data encryption on token data stores. == Difference from encryption == Tokenization and "classic" encryption effectively protect data if implemented properly, and a computer security system may use both. While similar in certain regards, tokenization and classic encryption differ in a few key aspects. Both are cryptographic data security methods and the

    Read more →
  • Commit (data management)

    Commit (data management)

    In computer science and data management, a commit is a behavior that marks the end of a transaction and provides Atomicity, Consistency, Isolation, and Durability (ACID) in transactions. The submission records are stored in the submission log for recovery and consistency in case of failure. In terms of transactions, the opposite of committing is giving up tentative changes to the transaction, which is rolled back. Due to the rise of distributed computing and the need to ensure data consistency across multiple systems, commit protocols have been evolving since their emergence in the 1970s. The main developments include the Two-Phase Commit (2PC) first proposed by Jim Gray, which is the fundamental core of distributed transaction management. Subsequently, the Three-phase Commit (3PC), Hypothesis Commit (PC), Hypothesis Abort (PA), and Optimistic Commit protocols gradually emerged, solving the problems of blocking and fault recovery. Today, new fields such as e-commerce payment and blockchain technology are emerging, and submission protocols play a significant role in various business areas. By effectively handling transactions, resolving faults and recovering problems, the commit protocol becomes crucial in ensuring the reliability and consistency of data management. == History == The concept of Commit originated in the late 1960s and early 1970s, when computer technology was rapidly advancing and data management was becoming an important requirement in business and finance. Enterprises have gradually replaced the traditional paper records with computers, which has fully improved the work efficiency. The reliability and consistency of data have become a necessary requirement. Transaction management at this stage is relatively simple, limited to using a single computer for processing. It merely effectively records the changes in data to ensure that the data remains stable after the transaction is completed or terminated. In the late 1970s, as database systems moved from a single calculator operation to multiple distributed collaborations, ensuring data consistency and reliability became a new challenge. In 1978, computer scientist Jim Gray proposed the famous two-phase Commit Protocol (2PC), which became an effective solution for distributed transaction management, successfully managing data synchronization problems between multiple nodes. However, this commit protocol has some potential transaction blocking problems when nodes fail. In the early 1980s, researchers discovered that although the two-step commit protocol was effective at synchronizing data, there could be long waits and even system crashes, with limitations. To improve this problem, people have begun to explore new and effective methods, including enhancing efficiency by reducing message communication during the protocol process. IBM's R database introduced the Assumed Commit and Assumed abort protocols, which contributed significantly to transaction management efficiency. These two protocols have greatly improved the processing efficiency of distributed transactions by reducing communication overhead and have become an important breakthrough in the technology of transaction commit protocols. By the early 1990s, with the increase in business demands and the complexity of transactions, enterprises required higher efficiency in distributed transaction processing. In order to adapt to the needs of different environments, the scientific community has gradually developed various variants of commit protocols to provide more flexible transaction management options for different needs. For example, the three-phase commit protocol promotes the commit of transactions more effectively and reduces the occurrence of blocking problems by adding a pre-commit protocol and a timeout mechanism. In the 21st century, with the popularization of mobile Internet and wireless technology, the commit protocol has been further developed, and researchers have begun to pay attention to how to reduce the blocking in the transaction process to solve the problem of broadband limitation, battery life and network instability in the mobile environment. The proposal of optimistic commit protocol marks the extension of commit technology from traditional database to the emerging mobile data field. This protocol allows transactions to temporarily use unconfirmed data, improving the user experience in cases of poor network conditions. In recent years, with the rise of blockchain and decentralized technologies, submission protocols and consensus mechanisms have gradually merged. These consensus algorithms play a role in tamper-proofing and preventing malicious attacks on node pairs in a decentralized environment. This enables commit to no longer be confined to the scope of traditional database management, but to become the core technology of trust computing and distributed ledgers, further expanding the application field of commit in the digital age. This integration has brought about extensive application impacts. Each transaction can achieve the effect of tracking global submissions through the verification of the consensus mechanism, becoming an important technical foundation for promoting the circulation of digital assets, the operation of cryptocurrencies and decentralized applications. == Commit Protocol Types == In the world of data management, a transaction is a series of database operations, such as bank transfers and order submission. In order to ensure the accuracy, consistency, and security of the data, transactions are usually completed completely, or cancelled completely, leaving no partially completed results. Commit protocol is the method used to coordinate this process. Different protocols are applicable to different submission scenarios and have their own advantages and disadvantages. There are four major commit protocols. === Two-Phase Commit (2PC) === The two-phase commit protocol is the most classic and broadest approach to distributed transactions, which includes both a preparation phase and a commit phase. This commit protocol is designed to allow the database coordinator to determine if all participating nodes agree. The preparation phase is the phase in which the coordination node sends a ready to commit request to all nodes participating in the transaction. The commit phase is a global commit after all participating nodes are ready, and if no agreement is reached, all nodes roll back the transaction and undo all previous operations. Although the two-phase commit protocol is the easiest to operate and widely used, its obvious drawback is that it can cause transactions to be blocked for a long time when nodes fail, resulting in a decline in system performance and making it difficult to terminate or continue immediately. === Three-Phase Commit (3PC) === The three-phase commit protocol is an improved non-blocking protocol based on 2PC, which is divided into three stages: preparation, pre-commit and commit. Firstly, each node sends a "preparation" request. After confirmation, a "pre-submission" stage is added. At this point, each node has completed most of the preparatory work and is waiting for the final confirmation. Finally, in the formal commit stage, after all nodes send the "commit" request, the transaction is completed and committed. Compared with 2PC, it increases the timeout mechanism, avoids the blocking problem caused by single point of failure, and improves the reliability of the system. The three-phase commit protocol significantly optimizes transaction reliability, but adds additional overhead for message transmission and state maintenance. It is more suitable for distributed application scenarios with high transaction sensitivity and no acceptance of long waiting times. === Presumed Commit (PC) and Presumed Abort (PA) === Presumed Commit (PC) is the default that the transaction will be committed successfully and rollback will be notified unless an anomaly is encountered. This commit reduces the message overhead and logging costs of a normal commits. Presumed Abort (PA) is assumed that the default state of the transaction is a rollback and will only be committed when all nodes have explicitly agreed. This commit is applicable to transactions that are not updated frequently or have a low probability of successful commit. The IBM R Distributed Database management System was the first to propose and practice the PC and PA protocols, handling distributed transaction management very efficiently and becoming a classic case in the field of database transaction management. === Optimistic Commit Protocol === With the rise of the Internet, the previous commit protocols are facing new challenges, especially in mobile scenarios with unstable networks. Excessively long transaction waiting times can affect the user experience. The Optimistic Commit Protocol allows a transaction to temporarily access uncommitted data before committing to avoid wait times. This type of commit is suitable f

    Read more →
  • Albert One

    Albert One

    Albert One is an artificial intelligence chatbot created by Robby Garner and designed to mimic the way humans make conversations using a multi-faceted approach in natural language programming. == History == In both 1998 and 1999, Albert One won the Loebner Prize Contest, a competition between chatterbots. Some parts of Albert were deployed on the internet beginning in 1995, to gather information about what kinds of things people would say to a chatterbot. Another element of Albert One involved the building of a large database of human statements, and associated replies. This portion of the project was tested at the 1994-1997 Loebner Prize contests. Albert was the first of Robby Garner's multifaceted bots. The Albert One system was composed of several subsystems. Among those were a version of Eliza, the therapist, Elivs, another Eliza-like bot, and several other helper applications working together in a hierarchical arrangement. As a continuation of the stimulus-response library, various other database queries and assertions were tested to arrive at each of Albert's responses. Robby went on to develop networked examples of this kind of hierarchical "glue" at The Turing Hub.

    Read more →
  • Microsoft Security Development Lifecycle

    Microsoft Security Development Lifecycle

    The Microsoft Security Development Lifecycle (SDL) is the approach Microsoft uses to integrate security into DevOps processes (sometimes called a DevSecOps approach). You can use this SDL guidance and documentation to adapt this approach and practices to your organization. == Overview == The practices outlined in the SDL approach are applicable to all types of software development and across all platforms, ranging from traditional waterfall methodologies to modern DevOps approaches. They can generally be applied to the following: Software – whether you are developing software code for firmware, AI applications, operating systems, drivers, IoT Devices, mobile device apps, web services, plug-ins or applets, hardware microcode, low-code/no-code apps, or other software formats. Note that most practices in the SDL are applicable to secure computer hardware development as well. Platforms – whether the software is running on a ‘serverless’ platform approach, on an on-premises server, a mobile device, a cloud hosted VM, a user endpoint, as part of a Software as a Service (SaaS) application, a cloud edge device, an IoT device, or anywhere else. == Practices == The SDL recommends 10 security practices to incorporate into your development workflows. Applying the 10 security practices of SDL is an ongoing process of improvement so a key recommendation is to begin from some point and keep enhancing as you proceed. This continuous process involves changes to culture, strategy, processes, and technical controls as you embed security skills and practices into DevOps workflows. The 10 SDL practices are: Establish security standards, metrics, and governance Require use of proven security features, languages, and frameworks Perform security design review and threat modeling Define and use cryptography standards Secure the software supply chain Secure the engineering environment Perform security testing Ensure operational platform security Implement security monitoring and response Provide security training == Versions ==

    Read more →
  • Pinoy baiting

    Pinoy baiting

    Pinoy baiting is a phrase that has been used to refer to acts by non-Filipino individuals, usually celebrities or YouTubers, of posting content online purportedly with the intention of getting the attention of Filipinos, by being surprised about the Philippines or its people. Pinoy baiters are defined as giving superficial and allegedly insincere praises and similar reactions that give recognition to the Philippines or its people. Subsequent responses by Filipinos to what have been referred to as acts of Pinoy baiting have been criticized as a form of cultural cringe. This criticism would subsequently give the advice that Filipinos should not constantly require validation from non-Filipinos about themselves or their country. == Pinoy baiting mediums == === Reaction videos === On social media such as YouTube, channels with specific focus on showing their reaction towards and opinions about certain videos or topics are called reaction channels. Reaction videos are very popular and require minimal effort to create, and thus made it easy for alleged Pinoy baiting to thrive within this video-making genre. === Travel vlogs === Vlogging, short for video blogging, grew in popularity in the 2020s. Most of the popular alleged Pinoy-baiting channels tend to be vlog channels, normally following the same script under such titles as "The Philippines changed us/me", "First impression of the Philippines", "Is this really Manila?" and "Filipinos are such Kind/Good People!", and made while travelling to touristy areas such as Boracay or Bonifacio Global City and taste-testing the fast food chain Jollibee, among others. == Criticism of the phrase == Philippines-based Korean vlogger Jessica Lee had been accused by some YouTube viewers of engaging in Pinoy baiting. In a response vlog, Lee acknowledged that there may be individuals engaging in this "business strategy" of gaining views and subscribers from one of the largest communities online. However, she questioned the objectivity of some use of the phrase, citing any vlogging subject as fair game for a negative impression of being a "baiting" tool for the vlogger treating of that subject. She also invoked vloggers' freedom to choose whatever subject they want to talk about in a deep or shallow manner, while enjoining citizens to exercise their free-market right to unfollow vloggers they hate and follow those vloggers that "make them happy". She also gave her critics an explanation why she ended up vlogging about Philippine and Filipino subjects.

    Read more →
  • Social network game

    Social network game

    A social network game (sometimes simply referred to as a social media game, social gaming, or online social game) is a type of online game that is played through social networks or social media. They typically feature gamification systems with multiplayer gameplay mechanics. Social network games were originally implemented as browser games. As mobile gaming took off, the games moved to mobile as well. While they share many aspects of traditional video games, social network games often employ additional ones that make them distinct. Traditionally they are oriented to be social games and casual games. The first cross-platform "Facebook-to-Mobile" social network game was developed in 2011 by a Finnish company Star Arcade. Social network games are amongst the most popular games played in the world, with several products with tens of millions of players. (Lil) Green Patch, Happy Farm, and Mob Wars were some of the first successful games of this genre. FarmVille, Mafia Wars, Kantai Collection, and The Sims Social are more recent examples of popular social network game. Major companies that made or published social network games include Zynga, Wooga and Bigpoint Games. == Demographics == As of 2010, it was reported that 55 percent of the social network gaming demographic in the United States consisted of women while in the United Kingdom, women made up nearly 60 percent of the demographic. In addition, most social gamers were around the 30 to 59 age range, with the average social gamer being 43 years old. Social gaming may appeal more to the older demographic because it is free, easier to advance through in a short period, does not involve as much violence as traditional video games, and is easier to grasp. Other games target certain demographics that use social media, such as Pot Farm creating a community by involving elements of cannabis subculture in its gameplay. == Technology and platforms == A social network video game is a client-server application. The client in the web era was implemented with a mix of web technologies like Flash, HTML5, PHP and JavaScript. When mobile games moved to mobile, social game front ends were developed using mobile platform technologies like Java, Objective-C, Swift and C++. The back end was a mix of programming languages and systems, including PHP, Ruby, C++ and go. Where social network video games diverged from traditional game development was the combination of real-time analytics to continuously optimize game mechanics to drive growth, revenue, and engagement. == Distinct features == The following table outlines common characteristics of social games, mentioned by Björk at the 2010 GCO Games Convention Online: A social network game may employ any of the following features: asynchronous gameplay, which allows rules to be resolved without needing players to play at the same time. gamification, which video game mechanics such as achievements and points are applied to those experienced when playing games in order to motivate and engage users. community, as one of the most distinct features of social video games is in leveraging the player's social network. Quests or game goals may only be possible if a player "shares" with friends connected by the social network hosting the game or gets them to play, as well as "neighbors" or "allies". a lack of victory conditions: there are generally no victory conditions since most developers count on users playing their games often. The game never ends and no one is ever declared winner. Instead, many casual games have "quests" or "missions" for players to complete. This is not true for board game-like social games, such as Scrabble. a virtual currency which players usually must purchase with real-world money. With the in-game currency, players can buy upgrades that would otherwise take much longer to earn through in-game achievements. In many cases, some upgrades are only available with the virtual currency. == Engagement strategies == Since social network games are often less challenging than console games and they have relatively shorter game play, they use different techniques to stretch game play and tools to retain users. Continuous goals: The games assign specific goals for users to achieve. As they advance in the game, the goals become more challenging and time-consuming. They also provide frequent feedback with their performance. Every action will translate towards a certain goal that will be used to attain higher gaming capitals. Gaming capitals: Players are encouraged to earn different badges, trophies, and accolades that indicate their progress and accomplishments. Some achievements are unlocked just by advancing in the game while others may significantly alter the rationale behind the game and require extensive investment from players. The ways of gaining gaming capital are not limited to playing games but the games-related productive activities that are appreciated in the player's social circle too. By accumulating gaming capitals, they provide an intrinsic benefit to gamers as there is an avenue to boost their accomplishment and showcase their expertise of the game. The achievements are visible to their network of friends. Gaming capitals are a way for developers to increase replay value provides extended play time, and players get more value from the game. Motivation for collecting gaming capitals: 1. Legitimization: refers to society's willingness to approve or condone certain behavior. Collecting is about channeling one's materialistic desires into more meaningful pursuits. Game achievements serve a similar purpose, allowing players to justify the hours spent playing the game. 2. Self-extension: Gathering and controlling meaningful objects or experiences can work to gain one an improved sense of self. The collector's goal to complete a collection is symbolically about completing the self too. Events timed to real world: Popular games such as Dragon City and Wild Ones require users to wait a certain time period before their "energy bars" replenish. Without energy, they are unable to conduct any form of action. Gamers are forced to wait and return after their energy replenishes to continue playing. == Monetization == Social network games frequently monetize based on virtual good transactions, but other games are emerging that utilize newer economic models. === Virtual goods === Gamers will be able to purchase in game items like power-ups, avatar accessories, or decorative items users purchase within the game itself. This is realized by monetize products that do not technically exist. Virtual goods account for over 90% of all revenue generated by the world's top social game developers. Designers optimize user experience through additional gameplay, missions, and quests, without having to worry about overhead or unused stock. == Advertising == The following are common ways of advertising in social network games: === Banner advertisements === As banner ads within social networks tend to be where ad response is low, they tend to be priced at bottom-of-the-barrel CPMs of around $2. However, because social games generate so many page views, they are the biggest part of advertising revenue for the social gaming industry. === Video ads === Videos are the ad format with the most revenue per view. They tend to be higher-priced, either by CPMs ($35+ CPM in social games) or cost-per-completed-view. According to studies, video ads result in highest brand recall thus a good return on investment for advertisers. Video ads are shown either in in-game interstitials (e.g. when the game is loading a new screen) or through incentive-based advertising, i.e. you will get either an in-game reward or Facebook credits for watching an advertisement. === Product placement === A brand or product will be injected in a game in some way. Due to the variety of ways in which product placement can be accomplished in any media, and because the category is nascent, this category is not standardized at all, but some examples include branded in-game goods or even in-game quests. For example, in a game where you run a restaurant, you might be asked to collect ingredients to make a Starbucks Frappuccino, and receive in-game rewards for doing so. As these product placement deals are non-standard, they are largely charged with a production fee, which can be $350,000 to $750,000 depending on the type of placement and the popularity of the game. === Lead generation offers === Another form of advertising that is prevalent in many social games are lead generation offers. In this form of advertising, companies, usually from different industries, aim to convince players to sign up for their goods or services and in exchange, players will receive virtual gifts or advance in the game as a reward. === Sponsorship === ==== White label games ==== Applications that are built once, then individualized and licensed again and again. Developer can create a quality app focused on fun while leaving the edge

    Read more →
  • GeneXus

    GeneXus

    GeneXus is a low code, cross-platform, knowledge representation-based development tool, mainly oriented towards enterprise-class applications for web applications, smart devices, and the Microsoft Windows platform. GeneXus uses mostly declarative language to generate native code for multiple environments. It includes a normalization module, which creates and maintains an optimal database structure based on user views. The languages for which code can be generated include COBOL, Java, Objective-C, RPG, Ruby, Visual Basic, and Visual FoxPro. Some of the DBMSs supported are Microsoft SQL Server, Oracle, IBM Db2, Informix, PostgreSQL, and MySQL. GeneXus was developed by Uruguayan company ARTech Consultores SRL which later renamed to Genexus SA. The latest version is GeneXus 18, which was released on November 10, 2022.

    Read more →
  • Chaotic cryptology

    Chaotic cryptology

    Chaotic cryptology is the application of mathematical chaos theory to the practice of cryptography, the study or techniques used to privately and securely transmit information with the presence of a third-party or adversary. Since first being investigated by Robert Matthews in 1989, the use of chaos in cryptography has attracted much interest. However, long-standing concerns about its security and implementation speed continue to limit its implementation. Chaotic cryptology consists of two opposite processes: Chaotic cryptography and Chaotic cryptanalysis. Cryptography refers to encrypting information for secure transmission, whereas cryptanalysis refers to decrypting and deciphering encoded encrypted messages. In order to use chaos theory efficiently in cryptography, the chaotic maps are implemented such that the entropy generated by the map can produce required Confusion and diffusion. Properties in chaotic systems and cryptographic primitives share unique characteristics that allow for the chaotic systems to be applied to cryptography. If chaotic parameters, as well as cryptographic keys, can be mapped symmetrically or mapped to produce acceptable and functional outputs, it will make it next to impossible for an adversary to find the outputs without any knowledge of the initial values. Since chaotic maps in a real life scenario require a set of numbers that are limited, they may, in fact, have no real purpose in a cryptosystem if the chaotic behavior can be predicted. One of the most important issues for any cryptographic primitive is the security of the system. However, in numerous cases, chaos-based cryptography algorithms are proved insecure. The main issue in many of the cryptanalyzed algorithms is the inadequacy of the chaotic maps implemented in the system. == Types == Chaos-based cryptography has been divided into two major groups: Symmetric chaos cryptography, where the same secret key is used by sender and receiver. Asymmetric chaos cryptography, where one key of the cryptosystem is public. Some of the few proposed systems have been broken. The majority of chaos-based cryptographic algorithms are symmetric. Many use discrete chaotic maps in their process. == Applications == === Image encryption === Bourbakis and Alexopoulos in 1991 proposed supposedly the earliest fully intended digital image encryption scheme which was based on SCAN language. Later on, with the emergence of chaos-based cryptography hundreds of new image encryption algorithms, all with the aim of improving the security of digital images were proposed. However, there were three main aspects of the design of an image encryption that was usually modified in different algorithms (chaotic map, application of the map and structure of algorithm). The initial and perhaps most crucial point was the chaotic map applied in the design of the algorithms. The speed of the cryptosystem is always an important parameter in the evaluation of the efficiency of a cryptography algorithm, therefore, the designers were initially interested in using simple chaotic maps such as tent map, and the logistic map. However, in 2006 and 2007, the new image encryption algorithms based on more sophisticated chaotic maps proved that application of chaotic map with higher dimension could improve the quality and security of the cryptosystems. === Hash function === Chaotic behavior can generate hash functions, such as applying the Chirikov/Julia 3D trajectory translation into a SHA-512 hash. === Random number generation === The unpredictable behavior of the chaotic maps can be used in the generation of random numbers. Some of the earliest chaos-based random number generators tried to directly generate random numbers from the logistic map. Many more recent works did so using the numerical solutions of hyperchaotic systems of differential equations, either at the integer-order, or the fractional-order.

    Read more →
  • AS1 (networking)

    AS1 (networking)

    AS1 (Applicability Statement 1) is a specification about how to transport structured business-to-business data securely and reliably over the Internet. Security is achieved by using digital certificates and encryption. == AS1 technical overview == The AS1 protocol is based on SMTP and S/MIME. It was the first AS protocol developed and uses signing, encryption and MDN conventions. In other words: Files are sent as "attachments" in a specially coded SMIME email message Messages can be signed, but do not have to be Messages can be encrypted, but do not have to be Messages may request an MDN back if all went well, but do not have to request such a message If the original AS1 message requested an MDN... Upon the receipt of the message and its successful decryption or signature validation (as necessary) a "success" MDN will be sent back to the original sender. This MDN is typically signed but not encrypted. Upon the receipt and successful verification of the signature on the MDN, the original sender will "know" that the recipient got their message (this provides the "Non-repudiation" element of AS1) If there are any problems receiving or interpreting the original AS1 message, a "failed" MDN may be sent back. Like any other AS file transfer, AS1 file transfers typically require both sides of the exchange to trade X.509 certificates and specific "trading partner" names before any transfers can take place.

    Read more →
  • Transparent decryption

    Transparent decryption

    Transparent decryption is a method of decrypting data which unavoidably produces evidence that the decryption operation has taken place. The idea is to prevent the covert decryption of data. In particular, transparent decryption protocols allow a user Alice to share with Bob the right to access data, in such a way that Bob may decrypt at a time of his choosing, but only while simultaneously leaving evidence for Alice of the fact that decryption occurred. Transparent decryption supports privacy, because this evidence alerts data subjects to the fact that information about them has been decrypted and disincentivises data misuse. Recent work further formalizes transparent decryption and explores practical implementations based on cryptographic protocols and blockchain systems. == Applications == Transparent decryption has been proposed for several systems where there is a need to simultaneously achieve accountability and secrecy. For example: In lawful interception, law enforcement agencies can access private messages and emails. Transparent decryption can make such accesses accountable, giving citizens guarantees about how their private information is accessed. Data arising from vehicles and IoT devices may contain personal information about the vehicle or device owners and their activities. Nevertheless, the data is typically processed in order to provide user functionality and also to investigate and fight crime. Transparent decryption can be used to help users monitor when and how data about them is being accessed and used. == Implementation == In transparent decryption, the decryption key is distributed among a set of agents (called trustees); they use their key share only if the required transparency conditions have been satisfied. Typically, the transparency condition can be formulated as the presence of the decryption request in a distributed ledger. == Alternative solutions == Besides transparent decryption, some other techniques have been proposed for achieving law enforcement while preserving privacy. Solutions that allow competing parties to unify their data access policies. Attribute-based encryption with oblivious attribute translation (OTABE) is an extension of attribute-based encryption that allows translation between proprietary attributes belonging to different organisations, and it has been applied to the problem of law-enforcement access to phone call metadata. Solutions that rely on sophisticated cryptography, such as zero-knowledge proofs that the actions of law enforcement is consistent with judge rulings and the actions of companies, and multi-party computation to compute results.

    Read more →
  • Tresorit

    Tresorit

    Tresorit is a Swiss company providing end-to-end encrypted cloud storage and secure content collaboration services. Founded in 2011, the company primarily serves businesses and organizations with elevated data protection and compliance requirements. Since 2021, Tresorit has been part of Swiss Post's digital business services, which, under the name 'Swiss Post Digital' offer secure communication platforms and connectable software solutions for SMEs, public authorities, and the healthcare sector, among others. == History == Tresorit was founded in 2011 by Hungarian software developers Istvan Lam, Szilveszter Szebeni and Gyorgy Szilagyi with the aim of providing a secure alternative to traditional cloud storage solutions. The company developed a cloud collaboration platform based on client-side end-to-end encryption and a zero-knowledge architecture. In its early years, Tresorit gained attention through a public security challenge inviting researchers to attempt to compromise its encryption system. The initiative received coverage in technology and cybersecurity media. The company initially positioned itself as a secure alternative to conventional cloud storage services and gradually expanded its offering toward enterprise-focused collaboration tools. In 2021, Swiss Post Communications Services acquired a majority stake in Tresorit. The company is now part of Swiss Post, and continues to operate independently within Swiss Post’s digital division, while benefiting from the broader infrastructure and institutional framework of its parent organization. Tresorit has offices in Zurich, Munich, and Budapest. == Products and Services == Tresorit provides a cloud-based platform for secure file storage and collaboration. Its services include encrypted file sharing, email encryption, electronic signatures, and encrypted data rooms for managing sensitive documents and workflows. The platform is available on Windows, macOS, Linux, Android, and iOS. == Technology == Tresorit uses client-side end-to-end encryption based on a zero-knowledge model. Files are encrypted on the user’s device before being uploaded to company servers. According to the company, encryption keys remain under user control, meaning that Tresorit and third parties cannot access the content of stored files. == Security challenge == Between 2013 and 2014, Tresorit organized a public challenge inviting security researchers to attempt to compromise the service's encryption implementation. The challenge received coverage in technology and cybersecurity media. == Acquisition by Swiss Post == In 2021, Swiss Post Communications Services acquired a majority stake in Tresorit as part of Swiss Post’s broader digital services strategy. The company is now part of Swiss Post. == Reception == Tresorit has been covered by international technology and business publications in the context of secure cloud storage and encrypted collaboration services. TechCrunch described the company as an early European provider of end-to-end encrypted cloud services, while The New York Times included it in discussions of secure file-sharing tools. Other publications such as TechRadar and ITPro have reviewed Tresorit in the context of enterprise security and confidential data handling.

    Read more →
  • Cypherpunks (book)

    Cypherpunks (book)

    Cypherpunks: Freedom and the Future of the Internet is a 2012 book by Julian Assange, in discussion with Internet activists and cypherpunks Jacob Appelbaum, Andy Müller-Maguhn and Jérémie Zimmermann. Its primary topic is society's relationship with information security. In the book, the authors warn that the Internet has become a tool of the police state, and that the world is inadvertently heading toward a form of totalitarianism. They promote the use of cryptography to protect against state surveillance. In the introduction, Assange says that the book is "not a manifesto [...] [but] a warning". He told Guardian journalist Decca Aitkenhead: A well-defined mathematical algorithm can encrypt something quickly, but to decrypt it would take billions of years – or trillions of dollars' worth of electricity to drive the computer. So cryptography is the essential building block of independence for organisations on the Internet, just like armies are the essential building blocks of states, because otherwise one state just takes over another. There is no other way for our intellectual life to gain proper independence from the security guards of the world, the people who control physical reality. Assange later wrote in The Guardian: "Strong cryptography is a vital tool in fighting state oppression." saying that was the message of his book, Cypherpunks. Cypherpunks is published by OR Books. It is primarily a transcript of World Tomorrow episode eight, a two-part interview between Assange, Jacob Appelbaum, Andy Müller-Maguhn, and Jérémie Zimmermann. In the foreword, Assange said, "the Internet, our greatest tool for emancipation, has been transformed into the most dangerous facilitator of totalitarianism we have ever seen".

    Read more →
  • Conjugate coding

    Conjugate coding

    Conjugate coding is a cryptographic tool, introduced by Stephen Wiesner in the late 1960s. It is part of the two applications Wiesner described for quantum coding, along with a method for creating fraud-proof banking notes. The application that the concept was based on was a method of transmitting multiple messages in such a way that reading one destroys the others. This is called quantum multiplexing and it uses photons polarized in conjugate bases as "qubits" to pass information. Conjugate coding also is a simple extension of a random number generator. At the behest of Charles Bennett, Wiesner published the manuscript explaining the basic idea of conjugate coding with a number of examples but it was not embraced because it was significantly ahead of its time. Because its publication has been rejected, it was developed to the world of public-key cryptography in the 1980s as oblivious transfer, first by Michael Rabin and then by Shimon Even. It is used in the field of quantum computing. The initial concept of quantum cryptography developed by Bennett and Gilles Brassard was also based on this concept.

    Read more →