AI Essay Writer — hands-on reviews, top picks, pricing, pros and cons and a practical how-to guide on Aizhi.
The Shepp–Logan phantom is a standard test image created by Larry Shepp and Benjamin F. Logan for their 1974 paper "The Fourier Reconstruction of a Head Section". It serves as the model of a human head in the development and testing of image reconstruction algorithms. == Definition == The function describing the phantom is defined as the sum of 10 ellipses inside a 2×2 square:
Read more →
POODLE (which stands for "Padding Oracle On Downgraded Legacy Encryption") is a security vulnerability which takes advantage of the fallback to SSL 3.0. If attackers successfully exploit this vulnerability, on average, they only need to make 256 SSL 3.0 requests to reveal one byte of encrypted messages. Bodo Möller, Thai Duong and Krzysztof Kotowicz from the Google Security Team discovered this vulnerability; they disclosed the vulnerability publicly on October 14, 2014 (despite the paper being dated "September 2014"). On December 8, 2014, a variation of the POODLE vulnerability that affected TLS was announced. The CVE-ID associated with the original POODLE attack is CVE-2014-3566. F5 Networks filed for CVE-2014-8730 as well, see POODLE attack against TLS section below. == Prevention == To mitigate the POODLE attack, one approach is to completely disable SSL 3.0 on the client side and the server side. However, some old clients and servers do not support TLS 1.0 and above. Thus, the authors of the paper on POODLE attacks also encourage browser and server implementation of TLS_FALLBACK_SCSV, which will make downgrade attacks impossible. Another mitigation is to implement "anti-POODLE record splitting". It splits the records into several parts and ensures none of them can be attacked. However the problem of the splitting is that, though valid according to the specification, it may also cause compatibility issues due to problems in server-side implementations. A full list of browser versions and levels of vulnerability to different attacks (including POODLE) can be found in the article Transport Layer Security. Opera 25 implemented this mitigation in addition to TLS_FALLBACK_SCSV. Google's Chrome browser and their servers had already supported TLS_FALLBACK_SCSV. Google stated in October 2014 it was planning to remove SSL 3.0 support from their products completely within a few months. Fallback to SSL 3.0 has been disabled in Chrome 39, released in November 2014. SSL 3.0 has been disabled by default in Chrome 40, released in January 2015. Mozilla disabled SSL 3.0 in Firefox 34 and ESR 31.3, which were released in December 2014, and added support of TLS_FALLBACK_SCSV in Firefox 35. Microsoft published a security advisory to explain how to disable SSL 3.0 in Internet Explorer and Windows OS, and on October 29, 2014, Microsoft released a fix which disables SSL 3.0 in Internet Explorer on Windows Vista / Server 2003 and above and announced a plan to disable SSL 3.0 by default in their products and services within a few months. Microsoft disabled fallback to SSL 3.0 in Internet Explorer 11 for Protect Mode sites on February 10, 2015, and for other sites on April 14, 2015. Apple's Safari (on OS X 10.8, iOS 8.1 and later) mitigated against POODLE by removing support for all CBC protocols in SSL 3.0, however, this left RC4 which is also completely broken by the RC4 attacks in SSL 3.0. POODLE was completely mitigated in OS X 10.11 (El Capitan 2015) and iOS 9 (2015). To prevent the POODLE attack, some web services dropped support of SSL 3.0. Examples include CloudFlare and Wikimedia. Network Security Services version 3.17.1 (released on October 3, 2014) and 3.16.2.3 (released on October 27, 2014) introduced support for TLS_FALLBACK_SCSV, and NSS will disable SSL 3.0 by default in April 2015. OpenSSL versions 1.0.1j, 1.0.0o and 0.9.8zc, released on October 15, 2014, introduced support for TLS_FALLBACK_SCSV. LibreSSL version 2.1.1, released on October 16, 2014, disabled SSL 3.0 by default. == POODLE attack against TLS == A new variant of the original POODLE attack was announced on December 8, 2014. This attack exploits implementation flaws of CBC encryption mode in the TLS 1.0 - 1.2 protocols. Even though TLS specifications require servers to check the padding, some implementations fail to validate it properly, which makes some servers vulnerable to POODLE even if they disable SSL 3.0. SSL Pulse showed "about 10% of the servers are vulnerable to the POODLE attack against TLS" before this vulnerability was announced. The CVE-ID for F5 Networks' implementation bug is CVE-2014-8730. The entry in NIST's NVD states that this CVE-ID is to be used only for F5 Networks' implementation of TLS, and that other vendors whose products have the same failure to validate the padding mistake in their implementations like A10 Networks and Cisco Systems need to issue their own CVE-IDs for their implementation errors because this is not a flaw in the protocol but in the implementation. The POODLE attack against TLS was found to be easier to initiate than the initial POODLE attack against SSL. There is no need to downgrade clients to SSL 3.0, meaning fewer steps are needed to execute a successful attack.
Read more →
A personal network is a set of human contacts known to an individual, with whom that individual would expect to interact at intervals to support a given set of activities. In other words, a personal network is a group of caring, dedicated people who are committed to maintain a relationship with a person in order to support a given set of activities. Having a strong personal network requires being connected to a network of resources for mutual development and growth. Personal networks can be understood by: who knows you what you know about them what they know about you what are you learning together how you work at that Personal networks are intended to be mutually beneficial, extending the concept of teamwork beyond the immediate peer group. The term is usually encountered in the workplace, though it could apply equally to other pursuits outside work. Personal networking is the practice of developing and maintaining a personal network, which is usually undertaken over an extended period. The concept is related to business networking and is often encouraged by large organizations, in the hope of improving productivity, and so a number of tools exist to support the maintenance of networks. Many of these tools are IT-based, and use Web 2.0 technologies. == History of networking and business success == In the second half of the twentieth century, U.S. advocates for workplace equity popularized the term and concept of networking as part of a larger social capital lexicon—which also includes terms such as glass ceiling, role model, mentoring, and gatekeeper—serving to identify and address the problems barring non-dominant groups from professional success. Mainstream business literature subsequently adopted the terms and concepts, promoting them as pathways to success for all career climbers. In 1970 these terms were not in the general American vocabulary; by the mid-1990s they had become part of everyday speech. Before the mid-twentieth century, what we call networking today was framed in the language of family and friendship. These close personal relationships provided a range of opportunities to preferred subsets of people, such as access to job opportunities, information, credit, and partnerships. Family networks and nepotism have proven particularly strong throughout history. However, other common bonds—from ethnicity and religion to school ties and club memberships—can connect subsets of people as well. Of course people whom insiders consider undesirable have been barred from such networks, with important consequences. Those who tap into influential networks can be nurtured toward success. Those who are shut out from networks can lose hope of success. Numerous business heroes of the past—such as Benjamin Franklin, Andrew Carnegie, Henry Ford, and John D. Rockefeller—exploited networks to great effect. The business networks that seemed natural and transparent to these white men were a closed book to women and minorities for much of American history. Drawing on work from the social sciences, these outsider groups had to identify and then harness the mechanisms behind networking's power. A prominent early example of this process was the formation of corporate caucuses by black men at Xerox starting in 1969. Groups of black salesmen met regularly to share information about Xerox's culture and strategies for navigating it most effectively. Through confrontation and collaboration with a relatively accommodating upper management, the caucuses helped open opportunities for high-performing black employees. The popular and business press began using the terms "network" and "networking" in the mid-1970s in the context of businesswomen consciously pursuing this strategy. Authors encouraged female workers to recognize and exploit the informal workplace systems that provided advancement. They urged women to identify mentors, use social contacts, and build peer and authority networks. The push for networking drew on ideas and relationships from the era's feminist movement, and dictionaries of the time explicitly linked business networking to women's efforts to succeed in the workplace. Since the closing decades of the twentieth century, networking has become a pervasive term and concept in American society. People now invoke networking in relation to everything from business to child rearing to science. While ambitious careerists seek networks as an indispensable talisman, companies purposefully encourage networking among their employees to boost performance and gain competitive advantage. At the same time, Americans are forgetting the workplace activism that first illuminated the power of networking. Unfortunately, this loss of historical context can fuel a backlash against outsider groups who still seek to synthesize networks so they can access the same opportunities enjoyed by insiders. == Characteristics of networks == Broadly speaking, all networks have the following characteristics: Purpose – A network can be established for learning, mission, business, idea, and family or personal reasons. Structure – A network is a group of interlinked entities that form a cluster. Most social structures tend to be characterized by dense clusters of strong connections. Style – The place, space, pace and style of interaction of the networks give an understanding of the style of the networks. Namkee Park, Seungyoon Lee and Jang Hyun Kim examined the relations between personal network characteristics and Facebook use. According to their study, personal networks are investigated through several structural characteristics, which can be categorized into three major dimensions according to the level of analysis: Dyadic tie attributes which include the characteristics of ego-alter ties such as duration, multiplexity, and proximity. Ego-alter tie attributes represent various dimensions of relationships between the focal person and their close contacts. First, tie duration refers to the length of time since the tie was originally initiated, which indicates the duration of relationships. Second, multiplexity includes a focal individual's degree of involvement in various types of interactions with network members. The third dimension is the physical proximity between ego and alter. Theories of proximity suggest that physical proximity between people affects their interaction and subsequently, their formation of network ties. The characteristics of alter-alter ties including personal network density. When moving to ties at the alter-alter level, ego-network density, which refers to the extent to which one's alters are connected with each other, is an important dimension of personal networks. Dense personal network structure indicates close interpersonal contacts among alters, and consequently, is considered to promote the sharing of resources. On the other hand, loose connections, or structural holes in ego-networks, have been found to facilitate the flow of information and to provide advantages in searching and obtaining resources (e.g., getting a job). The composition of alter attributes centered on the heterogeneity of alters in one's personal network. The heterogeneity of alters in one's personal network is associated with access to diverse resources and information It is expected, thus, that the heterogeneity attributes may enhance the focal actor's social activities. Each of these characteristics represents unique aspects of individuals' network relationships. == Types of personal networks == Personal networks can be used for two main reasons: social and professional. In 2012, LinkedIn along with TNS conducted a survey of 6,000 social network users to understand the difference between personal social networks and personal professional networks. The "Mindset Divide" of users of these networks was compared as follows: Emotions: Personal social networks: Nostalgia, fun, distraction. Personal professional networks: Achievement, success, aspiration. Use: Personal social networks: Users are in a casual mindset often just passing time. They use social networks to socialize, stay in touch, be entertained and kill time. Personal professional networks: In this purposeful mindset, users invest time to improve themselves and their future. These networks are used to maintain professional identity, make useful contacts, search for opportunities and stay in touch. Content: Personal professional networks: These provide information about career, brand updates and current affairs. Professional development: Personal development networks: These provide access to those who can provide information, knowledge, advice, support, expertise, guidance, and concrete resources to learn and work effectively—thus those who support the continuing professional development. == Personal network management == Personal network management (PNM) is a crucial aspect of personal information management and can be understood as the practice of managing the links and connections for social and profession
Read more →
MIME Object Security Services (MOSS) is a protocol that uses the multipart/signed and multipart/encrypted framework to apply digital signature and encryption services to MIME objects. == Details == The services are offered through the use of end-to-end cryptography between an originator and a recipient at the application layer. Asymmetric (public key) cryptography is used in support of the digital signature service and encryption key management. Symmetric (secret key) cryptography is used in support of the encryption service. The procedures are intended to be compatible with a wide range of public key management approaches, including both ad hoc and certificate-based schemes. Mechanisms are provided to support many public key management approaches. == Spreading == MOSS was never widely deployed and is now abandoned, largely due to the popularity of PGP.
Read more →
Content Threat Removal (CTR) is a cybersecurity technology intended to defeat the threat posed by handling digital content in the cyberspace. Unlike other defenses, including antivirus software and sandboxed execution, CTR does not rely on being able to detect threats. Similar to Content Disarm and Reconstruction, CTR is designed to remove the threat without knowing whether it has done so and acts without knowing if data contains a threat or not. Detection strategies work by detecting unsafe content, and then blocking or removing that content. Content that is deemed safe is delivered to its destination. In contrast, Content Threat Removal assumes all data is hostile and delivers none of it to the destination, regardless of whether it is actually hostile. Although no data is delivered, the business information carried by the data is delivered using new data created for the purpose. == Threat == Advanced attacks continuously defeat defenses that are based on detection. These are often referred to as zero-day attacks, because as soon as they are discovered attack detection mechanisms must be updated to identify and neutralize the attack, and until they are, all systems are unprotected. These attacks succeed because attackers find new ways of evading detection. Polymorphic code can be used to evade the detection of known unsafe data and sandbox detection allows attacks to evade dynamic analysis. == Method == A Content Threat Removal defence works by intercepting data on its way to its destination. The business information carried by the data is extracted and the data is discarded. Then entirely new, clean and safe data is built to carry the information to its destination. The effect of building new data to carry the business information is that any unsafe elements of the original data are left behind and discarded. This includes executable data, macros, scripts and malformed data that trigger vulnerabilities in applications. While CTR is a form of content transformation, not all transformations provide a complete defence against the content threat. == Applicability == CTR is applicable to user-to-user traffic, such as email and chat, and machine-to-machine traffic, such as web services. Data transfers can be intercepted by in-line application layer proxies and these can transform the way information content is delivered to remove any threat. CTR works by extracting business information from data and it is not possible to extract information from executable code. This means CTR is not directly applicable to web browsing, since most web pages are code. It can, however, be applied to content that is downloaded from, and uploaded to, websites. Although most web pages cannot be transformed to render them safe, web browsing can be isolated and the remote access protocols used to reach the isolated environment can be subjected to CTR. CTR provides a solution to the problem of stegware. It naturally removes detectable steganography and eliminates symbiotic and permutation steganography through normalisation.
Read more →
Data integration is the process of combining, sharing, or synchronizing data from multiple sources to provide users with a unified view. There are a wide range of possible applications for data integration, from commercial (such as when a business merges multiple databases) to scientific (combining research data from different bioinformatics repositories). The decision to integrate data tends to arise when the volume, complexity (that is, big data) and need to share existing data explodes. It has become the focus of extensive theoretical work, and numerous open problems remain unsolved. Data integration encourages collaboration between internal as well as external users. The data being integrated must be received from a heterogeneous database system and transformed to a single coherent data store that provides synchronous data across a network of files for clients. A common use of data integration is in data mining when analyzing and extracting information from existing databases that can be useful for Business information. == History == Issues with combining heterogeneous data sources, often referred to as information silos, under a single query interface have existed for some time. In the early 1980s, computer scientists began designing systems for interoperability of heterogeneous databases. The first data integration system driven by structured metadata was designed in 1991 at the University of Minnesota for the Integrated Public Use Microdata Series (IPUMS). IPUMS used a data warehousing approach, which extracts, transforms, and loads data from heterogeneous sources into a unique view schema so data from different sources become compatible. By making thousands of population databases interoperable, IPUMS demonstrated the feasibility of large-scale data integration. The data warehouse approach offers a tightly coupled architecture because the data are already physically reconciled in a single queryable repository, so it usually takes little time to resolve queries. The data warehouse approach is less feasible for data sets that are frequently updated, requiring the extract, transform, load (ETL) process to be continuously re-executed for synchronization. Difficulties also arise in constructing data warehouses when one has only a query interface to summary data sources and no access to the full data. This problem frequently emerges when integrating several commercial query services like travel or classified advertisement web applications. A trend began in 2009 favoring the loose coupling of data and providing a unified query-interface to access real time data over a mediated schema (see Figure 2), which allows information to be retrieved directly from original databases. This is consistent with the SOA approach popular in that era. This approach relies on mappings between the mediated schema and the schema of original sources, and translating a query into decomposed queries to match the schema of the original databases. Such mappings can be specified in two ways: as a mapping from entities in the mediated schema to entities in the original sources (the "Global-as-View" (GAV) approach), or as a mapping from entities in the original sources to the mediated schema (the "Local-as-View" (LAV) approach). The latter approach requires more sophisticated inferences to resolve a query on the mediated schema, but makes it easier to add new data sources to a (stable) mediated schema. As of 2010, some of the work in data integration research concerns the semantic integration problem. This problem addresses not the structuring of the architecture of the integration, but how to resolve semantic conflicts between heterogeneous data sources. For example, if two companies merge their databases, certain concepts and definitions in their respective schemas like "earnings" inevitably have different meanings. In one database it may mean profits in dollars (a floating-point number), while in the other it might represent the number of sales (an integer). A common strategy for the resolution of such problems involves the use of ontologies which explicitly define schema terms and thus help to resolve semantic conflicts. This approach represents ontology-based data integration. On the other hand, the problem of combining research results from different bioinformatics repositories requires bench-marking of the similarities, computed from different data sources, on a single criterion such as positive predictive value. This enables the data sources to be directly comparable and can be integrated even when the natures of experiments are distinct. As of 2011, it was determined that current data modeling methods were imparting data isolation into every data architecture in the form of islands of disparate data and information silos. This data isolation is an unintended artifact of the data modeling methodology that results in the development of disparate data models. Disparate data models, when instantiated as databases, form disparate databases. Enhanced data model methodologies have been developed to eliminate the data isolation artifact and to promote the development of integrated data models. One enhanced data modeling method recasts data models by augmenting them with structural metadata in the form of standardized data entities. As a result of recasting multiple data models, the set of recast data models will now share one or more commonality relationships that relate the structural metadata now common to these data models. Commonality relationships are a peer-to-peer type of entity relationships that relate the standardized data entities of multiple data models. Multiple data models that contain the same standard data entity may participate in the same commonality relationship. When integrated data models are instantiated as databases and are properly populated from a common set of master data, then these databases are integrated. Since 2011, data hub approaches have been of greater interest than fully structured (typically relational) Enterprise Data Warehouses. Since 2013, data lake approaches have risen to the level of Data Hubs. (See all three search terms popularity on Google Trends.) These approaches combine unstructured or varied data into one location, but do not necessarily require an (often complex) master relational schema to structure and define all data in the Hub. In recent times, as the number of applications being used have increased many fold and application to application integration have become critical and this has given rise to [Unified APIs] that help application developers integrate their apps with other apps and more recently with [MCP - Model Context Protocol] taking it a step further for AI Agents. Data integration plays a big role in business regarding data collection used for studying the market. Converting the raw data retrieved from consumers into coherent data is something businesses try to do when considering what steps they should take next. Organizations are more frequently using data mining for collecting information and patterns from their databases, and this process helps them develop new business strategies to increase business performance and perform economic analyses more efficiently. Compiling the large amount of data they collect to be stored in their system is a form of data integration adapted for Business intelligence to improve their chances of success. == Example == Consider a web application where a user can query a variety of information about cities (such as crime statistics, weather, hotels, demographics, etc.). Traditionally, the information must be stored in a single database with a single schema. But any single enterprise would find information of this breadth somewhat difficult and expensive to collect. Even if the resources exist to gather the data, it would likely duplicate data in existing crime databases, weather websites, and census data. A data-integration solution may address this problem by considering these external resources as materialized views over a virtual mediated schema, resulting in "virtual data integration". This means application-developers construct a virtual schema—the mediated schema—to best model the kinds of answers their users want. Next, they design "wrappers" or adapters for each data source, such as the crime database and weather website. These adapters simply transform the local query results (those returned by the respective websites or databases) into an easily processed form for the data integration solution (see figure 2). When an application-user queries the mediated schema, the data-integration solution transforms this query into appropriate queries over the respective data sources. Finally, the virtual database combines the results of these queries into the answer to the user's query. This solution offers the convenience of adding new sources by simply constructing an adapter or an application software blade for them. It contrasts with ETL systems or with a si
Read more →
The Scalable Coherent Interface or Scalable Coherent Interconnect (SCI), is a high-speed interconnect standard for shared memory multiprocessing and message passing. The goal was to scale well, provide system-wide memory coherence and a simple interface; i.e. a standard to replace existing buses in multiprocessor systems with one with no inherent scalability and performance limitations. The IEEE Std 1596-1992, IEEE Standard for Scalable Coherent Interface (SCI) was approved by the IEEE standards board on March 19, 1992. It saw some use during the 1990s, but never became widely used and has been replaced by other systems from the early 2000s. == History == Soon after the Fastbus (IEEE 960) follow-on Futurebus (IEEE 896) project in 1987, some engineers predicted it would already be too slow for the high performance computing marketplace by the time it would be released in the early 1990s. In response, a "Superbus" study group was formed in November 1987. Another working group of the standards association of the Institute of Electrical and Electronics Engineers (IEEE) spun off to form a standard targeted at this market in July 1988. It was essentially a subset of Futurebus features that could be easily implemented at high speed, along with minor additions to make it easier to connect to other systems, such as VMEbus. Most of the developers had their background from high-speed computer buses. Representatives from companies in the computer industry and research community included Amdahl, Apple Computer, BB&N, Hewlett-Packard, CERN, Dolphin Server Technology, Cray Research, Sequent, AT&T, Digital Equipment Corporation, McDonnell Douglas, National Semiconductor, Stanford Linear Accelerator Center, Tektronix, Texas Instruments, Unisys, University of Oslo, University of Wisconsin. The original intent was a single standard for all buses in the computer. The working group soon came up with the idea of using point-to-point communication in the form of insertion rings. This avoided the lumped capacitance, limited physical length/speed of light problems and stub reflections in addition to allowing parallel transactions. The use of insertion rings is credited to Manolis Katevenis who suggested it at one of the early meetings of the working group. The working group for developing the standard was led by David B. Gustavson (chair) and David V. James (Vice Chair). David V. James was a major contributor for writing the specifications including the executable C-code. Stein Gjessing’s group at the University of Oslo used formal methods to verify the coherence protocol and Dolphin Server Technology implemented a node controller chip including the cache coherence logic. Different versions and derivatives of SCI were implemented by companies like Dolphin Interconnect Solutions, Convex, Data General AViiON (using cache controller and link controller chips from Dolphin), Sequent and Cray Research. Dolphin Interconnect Solutions implemented a PCI and PCI-Express connected derivative of SCI that provides non-coherent shared memory access. This implementation was used by Sun Microsystems for its high-end clusters, Thales Group and several others including volume applications for message passing within HPC clustering and medical imaging. SCI was often used to implement non-uniform memory access architectures. It was also used by Sequent Computer Systems as the processor memory bus in their NUMA-Q systems. Numascale developed a derivative to connect with coherent HyperTransport. == The standard == The standard defined two interface levels: The physical level that deals with electrical signals, connectors, mechanical and thermal conditions The logical level that describes the address space, data transfer protocols, cache coherence mechanisms, synchronization primitives, control and status registers, and initialization and error recovery facilities. This structure allowed new developments in physical interface technology to be easily adapted without any redesign on the logical level. Scalability for large systems is achieved through a distributed directory-based cache coherence model. (The other popular models for cache coherency are based on system-wide eavesdropping (snooping) of memory transactions – a scheme which is not very scalable.) In SCI each node contains a directory with a pointer to the next node in a linked list that shares a particular cache line. SCI defines a 64-bit flat address space (16 exabytes) where 16 bits are used for identifying a node (65,536 nodes) and 48 bits for address within the node (256 terabytes). A node can contain many processors and/or memory. The SCI standard defines a packet switched network. === Topologies === SCI can be used to build systems with different types of switching topologies from centralized to fully distributed switching: With a central switch, each node is connected to the switch with a ringlet (in this case a two-node ring). In distributed switching systems, each node can be connected to a ring of arbitrary length and either all or some of the nodes can be connected to two or more rings. The most common way to describe these multi-dimensional topologies is k-ary n-cubes (or tori). The SCI standard specification mentions several such topologies as examples. The 2-D torus is a combination of rings in two dimensions. Switching between the two dimensions requires a small switching capability in the node. This can be expanded to three or more dimensions. The concept of folding rings can also be applied to the Torus topologies to avoid any long connection segments. === Transactions === SCI sends information in packets. Each packet consists of an unbroken sequence of 16-bit symbols. The symbol is accompanied by a flag bit. A transition of the flag bit from 0 to 1 indicates the start of a packet. A transition from 1 to 0 occurs 1 (for echoes) or 4 symbols before the packet end. A packet contains a header with address command and status information, payload (from 0 through optional lengths of data) and a CRC check symbol. The first symbol in the packet header contains the destination node address. If the address is not within the domain handled by the receiving node, the packet is passed to the output through the bypass FIFO. In the other case, the packet is fed to a receive queue and may be transferred to a ring in another dimension. All packets are marked when they pass the scrubber (a node is established as scrubber when the ring is initialized). Packets without a valid destination address will be removed when passing the scrubber for the second time to avoid filling the ring with packets that would otherwise circulate indefinitely. === Cache coherence === Cache coherence ensures data consistency in multiprocessor systems. The simplest form applied in earlier systems was based on clearing the cache contents between context switches and disabling the cache for data that were shared between two or more processors. These methods were feasible when the performance difference between the cache and memory were less than one order of magnitude. Modern processors with caches that are more than two orders of magnitude faster than main memory would not perform anywhere near optimal without more sophisticated methods for data consistency. Bus based systems use eavesdropping (snooping) methods since buses are inherently broadcast. Modern systems with point-to point links use broadcast methods with snoop filter options to improve performance. Since broadcast and eavesdropping are inherently non-scalable, these are not used in SCI. Instead, SCI uses a distributed directory-based cache coherence protocol with a linked list of nodes containing processors that share a particular cache line. Each node holds a directory for the main memory of the node with a tag for each line of memory (same line length as the cache line). The memory tag holds a pointer to the head of the linked list and a state code for the line (three states – home, fresh, gone). Associated with each node is also a cache for holding remote data with a directory containing forward and backward pointers to nodes in the linked list sharing the cache line. The tag for the cache has seven states (invalid, only fresh, head fresh, only dirty, head dirty, mid valid, tail valid). The distributed directory is scalable. The overhead for the directory based cache coherence is a constant percentage of the node’s memory and cache. This percentage is in the order of 4% for the memory and 7% for the cache. == Legacy == SCI is a standard for connecting the different resources within a multiprocessor computer system, and it is not as widely known to the public as for example the Ethernet family for connecting different systems. Different system vendors implemented different variants of SCI for their internal system infrastructure. These different implementations interface to very intricate mechanisms in processors and memory systems and each vendor has to preserve some degrees of
Read more →
SPKAC (Signed Public Key and Challenge, also known as Netscape SPKI) is a format for sending a certificate signing request (CSR): it encodes a public key, that can be manipulated using OpenSSL. It is created using the little documented HTML keygen element inside a number of Netscape compatible browsers. == Standardisation == There exists an ongoing effort to standardise SPKAC through an Internet Draft in the Internet Engineering Task Force (IETF). The purpose of this work has been to formally define what has existed prior as a de facto standard, and to address security deficiencies, particular with respect to historic insecure use of MD5 that has since been declared unsafe for use with digital signatures. == Implementations == HTML5 originally specified the
A system context diagram in engineering is a diagram that defines the boundary between the system, or part of a system, and its environment, showing the entities that interact with it. This diagram is a high level view of a system. It is similar to a block diagram. == Overview == System context diagrams show a system, as a whole and its inputs and outputs from/to external factors. According to Kossiakoff and Sweet (2011): System Context Diagrams ... represent all external entities that may interact with a system ... Such a diagram pictures the system at the center, with no details of its interior structure, surrounded by all its interacting systems, environments and activities. The objective of the system context diagram is to focus attention on external factors and events that should be considered in developing a complete set of systems requirements and constraints. System context diagrams are used early in a project to get agreement on the scope under investigation. Context diagrams are typically included in a requirements document. These diagrams must be read by all project stakeholders and thus should be written in plain language, so the stakeholders can understand items within the document. == Building blocks == Context diagrams can be developed with the use of two types of building blocks: Entities (Actors): labeled boxes; one in the center representing the system, and around it multiple boxes for each external actor Relationships: labeled lines between the entities and system For example, "customer places order." Context diagrams can also use many different drawing types to represent external entities. They can use ovals, stick figures, pictures, clip art or any other representation to convey meaning. Decision trees and data storage are represented in system flow diagrams. A context diagram can also list the classifications of the external entities as one of a set of simple categories (Examples:), which add clarity to the level of involvement of the entity with regards to the system. These categories include: Active: Dynamic to achieve some goal or purpose (Examples: "Article readers" or "customers"). Passive: Static external entities which infrequently interact with the system (Examples: "Article editors" or "database administrator"). Cooperative: Predictable external entities which are used by the system to bring about some desired outcome (Examples: "Internet service providers" or "shipping companies"). Autonomous (Independent): External entities which are separated from the system, but affect the system indirectly, by means of imposed constraints or similar influences (Examples: "regulatory committees" or "standards groups"). == Alternatives == The best system context diagrams are used to display how a system interoperates at a very high level, or how systems operate and interact logically. The system context diagram is a necessary tool in developing a baseline interaction between systems and actors; actors and a system or systems and systems. Alternatives to the system context diagram are: Architecture Interconnect Diagram: The figure gives an example of an Architecture Interconnect Diagram: A representation of the Albuquerque regional ITS architecture interconnects for the Albuquerque Police Department that was generated using the Turbo Architecture tool is shown in the figure. Each block represents an ITS inventory element, including the name of the stakeholder in the top shaded portion. The interconnect lines between elements are solid or dashed, indicating existing or planned connections. Business Model Canvas, a strategic management template for developing new or documenting existing business models. It is a visual chart with elements describing a firm's value proposition, infrastructure, customers, and finances.[1] It assists firms in aligning their activities by illustrating potential trade-offs. Enterprise data model: this type of data model according to Simsion (2005) can contain up to 50 to 200 entity classes, which results from specific "high level of generalization in data modeling". IDEF0 Top Level Context Diagram: The IDEF0 process starts with the identification of the prime function to be decomposed. This function is identified on a "Top Level Context Diagram" that defines the scope of the particular IDEF0 analysis. Problem Diagrams (Problem Frames): In addition to the kinds of things shown on a context diagram, a problem diagram shows requirements and requirements references. Use case diagram: One of the Unified Modeling Language diagrams. They also represent the scope of the project at a similar level of abstraction. - Use Cases, however, tend to focus more on the goals of 'actors' who interact with the system, and do not specify any solution. Use Case diagrams represent a set of Use Cases, which are textual descriptions of how an actor achieves the goal of a use case. for Example Customer Places Order. ArchiMate: ArchiMate is an open and independent enterprise architecture modeling language to support the description, analysis and visualization of architecture within and across business domains in an unambiguous way. Most of these diagrams work well as long as a limited number of interconnects will be shown. Where twenty or more interconnects must be displayed, the diagrams become quite complex and can be difficult to read.
Read more →
Media evaluation is a discipline of the external and logical social sciences and centres on the analysis of media content, rating the exposure using a number of pre-designated criteria commonly including tonal value and presence of key messages. It is said to be one of the fastest-growing areas of mass communications research. The International Association for Measurement and Evaluation of Communication (AMEC) is the industry-appointed trade body for companies and individuals involved in research, measurement, and evaluation in editorial media coverage and related communications issues. To be a full member of AMEC, companies must be able to: a) offer comprehensive media evaluation, research, and interpretation services, b) have been in business for at least two years, and c) have a media evaluation turnover of more than £150,000 when applying. In addition, all companies abide by a strict code of ethics and must implement tight quality control procedures. These requirements guarantee that all media evaluation services provided are of the highest caliber. The Commission on Public Relations Measurement & Evaluation is a different organization that was established in 1998 under the direction of the Institute for Public Relations. The Commission's main functions are to set standards and procedures for research and measurement in public relations and to publish authoritative white papers on best practices.
Read more →
Data Transformation Services (DTS) is a Microsoft database tool with a set of objects and utilities to allow the automation of extract, transform and load operations to or from a database. The objects are DTS packages and their components, and the utilities are called DTS tools. DTS was included with earlier versions of Microsoft SQL Server, and was almost always used with SQL Server databases, although it could be used independently with other databases. DTS allows data to be transformed and loaded from heterogeneous sources using OLE DB, ODBC, or text-only files, into any supported database. DTS can also allow automation of data import or transformation on a scheduled basis, and can perform additional functions such as FTPing files and executing external programs. In addition, DTS provides an alternative method of version control and backup for packages when used in conjunction with a version control system, such as Microsoft Visual SourceSafe. DTS has been superseded by SQL Server Integration Services in later releases of Microsoft SQL Server though there was some backwards compatibility and ability to run DTS packages in the new SSIS for a time. == History == In SQL Server versions 6.5 and earlier, database administrators (DBAs) used SQL Server Transfer Manager and Bulk Copy Program, included with SQL Server, to transfer data. These tools had significant shortcomings, and many DBAs used third-party tools such as Pervasive Data Integrator to transfer data more flexibly and easily. With the release of SQL Server 7 in 1998, "Data Transformation Services" was packaged with it to replace all these tools. The concept, design, and implementation of the Data Transformation Services was led by Stewart P. MacLeod (SQL Server Development Group Program Manager), Vij Rajarajan (SQL Server Lead Developer), and Ted Hart (SQL Server Lead Developer). The goal was to make it easier to import, export, and transform heterogeneous data and simplify the creation of data warehouses from operational data sources. SQL Server 2000 expanded DTS functionality in several ways. It introduced new types of tasks, including the ability to FTP files, move databases or database components, and add messages into Microsoft Message Queue. DTS packages can be saved as a Visual Basic file in SQL Server 2000, and this can be expanded to save into any COM-compliant language. Microsoft also integrated packages into Windows 2000 security and made DTS tools more user-friendly; tasks can accept input and output parameters. DTS comes with all editions of SQL Server 7 and 2000, but was superseded by SQL Server Integration Services in the Microsoft SQL Server 2005 release in 2005. == DTS packages == The DTS package is the fundamental logical component of DTS; every DTS object is a child component of the package. Packages are used whenever one modifies data using DTS. All the metadata about the data transformation is contained within the package. Packages can be saved directly in a SQL Server, or can be saved in the Microsoft Repository or in COM files. SQL Server 2000 also allows a programmer to save packages in a Visual Basic or other language file (when stored to a VB file, the package is actually scripted—that is, a VB script is executed to dynamically create the package objects and its component objects). A package can contain any number of connection objects, but does not have to contain any. These allow the package to read data from any OLE DB-compliant data source, and can be expanded to handle other sorts of data. The functionality of a package is organized into tasks and steps. A DTS Task is a discrete set of functionalities executed as a single step in a DTS package. Each task defines a work item to be performed as part of the data movement and data transformation process or as a job to be executed. Data Transformation Services supplies a number of tasks that are part of the DTS object model and that can be accessed graphically through the DTS Designer or accessed programmatically. These tasks, which can be configured individually, cover a wide variety of data copying, data transformation and notification situations. For example, the following types of tasks represent some actions that you can perform by using DTS: executing a single SQL statement, sending an email, and transferring a file with FTP. A step within a DTS package describes the order in which tasks are run and the precedence constraints that describe what to do in the case damage or of failure. These steps can be executed sequentially or in parallel. Packages can also contain global variables which can be used throughout the package. SQL Server 2000 allows input and output parameters for tasks, greatly expanding the usefulness of global variables. DTS packages can be edited, password protected, scheduled for execution, and retrieved by version. == DTS tools == DTS tools packaged with SQL Server include the DTS wizards, DTS Designer, and DTS Programming Interfaces. === DTS wizards === The DTS wizards can be used to perform simple or common DTS tasks. These include the Import/Export Wizard and the Copy of Database Wizard. They provide the simplest method of copying data between OLE DB data sources. There is a great deal of functionality that is not available by merely using a wizard. However, a package created with a wizard can be saved and later altered with one of the other DTS tools. A Create Publishing Wizard is also available to schedule packages to run at certain times. This only works if SQL Server Agent is running; otherwise the package will be scheduled, but will not be executed. === DTS Designer === The DTS Designer is a graphical tool used to build complex DTS Packages with workflows and event-driven logic. DTS Designer can also be used to edit and customize DTS Packages created with the DTS wizard. Each connection and task in DTS Designer is shown with a specific icon. These icons are joined with precedence constraints, which specify the order and requirements for tasks to be run. One task may run, for instance, only if another task succeeds (or fails). Other tasks may run concurrently. The DTS Designer has been criticized for having unusual quirks and limitations, such as the inability to visually copy and paste multiple tasks at one time. Many of these shortcomings have been overcome in SQL Server Integration Services, DTS's successor. === DTS Query Designer === A graphical tool used to build queries in DTS. === DTS Run Utility === DTS Packages can be run from the command line using the DTSRUN Utility. The utility is invoked using the following syntax: dtsrun /S server_name[\instance_name] { {/[~]U user_name [/[~]P password]} | /E } ] { {/[~]N package_name } | {/[~]G package_guid_string} | {/[~]V package_version_guid_string} } [/[~]M package_password] [/[~]F filename] [/[~]R repository_database_name] [/A global_variable_name:typeid=value] [/L log_file_name] [/W NT_event_log_completion_status] [/Z] [/!X] [/!D] [/!Y] [/!C] ] When passing in parameters which are mapped to Global Variables, you are required to include the typeid. This is rather difficult to find on the Microsoft site. Below are the TypeIds used in passing in these values.
Read more →
Talim (Kashmiri: تعليم, Kashmiri pronunciation: [t̪əːliːm], Urdu: تَعْلِیم, Arabic: تعليم, pronounced [taʕ.liːm] ) in textiles is a symbolic code and system of notation that facilitates the creation of intricate patterns in fabrics, such as shawls and carpets, and the written coded plans that include colour schemes and weaving instructions. The term is used in traditional hand-weaving in the Indian subcontinent. Talim was initially used to create certain types of patterns in Kashmiri shawls, and later came to be applied in the production of carpets. == Etymology and origin == The term talim, which refers to a symbolic code and system of notation used by shawl and carpet artisans in their weaving processes, came to the Urdu language from the Arabic noun taʻlim (تعليم), which means "authoritative instruction", "teaching", or "edification". It means the same in Urdu and Kashmiri. The Arabic noun originated from the second form of the Arabic root verb ʻalima (علم), which means "to know". According to a local belief in Kashmir, talim was introduced to them by Persian scholar and Sufi Muslim saint Mir Sayyid Ali Hamadani. The belief notwithstanding, talim might have originated from Kashmir; Amritsar was the only place outside of Srinagar where talim was used, by migrated Kashmiri artisans. == Technique == Whereas carpets are generally woven horizontally, providing weavers with a clear view of the progress they are making in creating designs, in Kashmir, carpets are woven vertically, so the weaver is reliant on the talim. The talim technique forms fabrics by passing the weft thread as per a given script that has design codes. Weavers use talim to weave the desired pattern with planned colours. Talim involves teamwork when applying the technique, as the process of creating intricate fabric designs in weaving begins with the Naqash (designer, who designs using pencils on graphs) meticulously crafting the design on a blank sheet of paper called a naska, and the master, Talim guru, making the colour codes and symbols for weft yarns that would interlace the warp to construct the desired design. He writes on a long strip of paper, in specific symbols, the colour codes, and the number of knots to be woven with each colour. Taraha guru collaborates with talim guru and is known as the artisan responsible for determining the colours. Talim uthana is a process or the act of "picking the codes" from the graph. A clerk called the Talim Navis would record the step-by-step instructions for these numbers and colours, and thousands of low-paid and interchangeable weavers would read or recite the record to carry out the design. Afterward, a talim copyist makes copies, which are needed when multiple looms weave the same product. The script, which has been encoded, is deciphered and translated according to the specific guidelines of weavers in order to incorporate the design that is included within it. Talim has been compared to "hieroglyphics" or as a "notational-cum-cryptographic system", as it is challenging to decipher and is unique to the shawls of Kashmir, which requires expertise to comprehend. According to researcher Gagan Deep Kaur, "The talim is widely held to be a trade secret of the community and has always been fiercely guarded by the owners." Those who use talim for shawl-making do not assign important tasks to women, because of the fear that the technique and knowledge may be divulged to other communities when the women are sent there to be married. The coded cards known as talim in the Kashmiri language were used for creating certain types of patterns in shawl weaving. The talim technique is employed in the creation of kani shawls, which originated from the Kanihama region of the Kashmir valley. Carpet weaving adapted the technique from shawl making. When Kashmiri artisans started to create carpets, they chose to continue using the talim rather than switching to a different method. The resurgence of the carpet industry in Amritsar during the last century resulted in the prevalent use of the talim technique among the local weavers, a majority of whom hailed from the region of Kashmir. === Recitation of codes === Talim was also communicated through recitation accompanied by a melodic chant or song. In traditional weaving practices, the use of chanting was common. The movement of the shuttles was synchronised with the song of the weaver, adding a musical rhythm to the instructions represented through hieroglyphics. The weaver's chant, "Two blue, one red, three yellow, two blue," served as a guide as they wove and replicated the designated pattern. == Usage == The first factories established in Amritsar around 1860 utilised Bokhara designs. However, Kashmiri weavers maintained their traditional techniques and employed the talim, instead of a cartoon, for tying knots. As a result, Amritsar became the second location in the Indian subcontinent to use the talim. The traditional weaving practices are still carried out in some parts of the Indian subcontinent. The exact date when talim was last used in the subcontinent varies depending on the region and the specific weaving community. Indian textile historian Jasleen Dhamija wrote in her 1989 book Handwoven Fabrics of India that there were still some weavers in the Kashmiri village of Kanihama who applied talim in weaving shawls. As of 2022, the carpet weavers in Kashmir were the only remaining users of talim in carpets, according to Zubair Ahmed, director of the Indian Institute of Carpet Technology. The institute aims to preserve traditional Kashmiri carpet designs by digitising talim and training weavers in the technique. == Gallery ==
Read more →
Prequel, Inc. is an American technology company and mobile app developer known for developing the Prequel mobile application, which enables editing photos and videos with filters and effects generated using artificial intelligence. Prequel was founded in 2018 by Serge Aliseenko and Timur Khabirov, who currently serves as the company's CEO. It is headquartered in New York City. As of August 2022, it had been downloaded more than 100 million times. == History == In 2016, entrepreneur Timur Khabirov and investor Serge Aliseenko registered a US corporation named AIAR Labs Inc, which was developing AR solutions as an outsourced contractor. Of several proprietary products, Prequel was selected for beta-testing as a product focused on editing photos and videos. In 2018, Prequel was released on the Apple App Store. The launch cost $3 million USD, financed with the founders’ personal funds. The first release included approximately 10 filters for photos and the same amount of effects that augmented images with rose petals, rain and snow, VHS and film reel simulations, glitch, grain, sun puddles, and lomography. By June 2020, the app had also been released for Android. In 2021, Prequel founders Timur Khabirov and Serge Aliseenko launched a venture studio for startups working with artificial, computer vision, and AR-based visual art. In December 2022, Prequel reached the number 14 slot on the global rankings for Apple App Store’s Top Charts and the number 5 slot on the App Store’s U.S. charts. In March 2023, Prequel launched a new app called Artique, which is an AI-powered image editing app for businesses. Artique provides advertising and marketing graphic design using ready-made templates that users can customize, while giving suggestions and visual cues through artificial intelligence. Prequel was also one of the companies participating in discussions about artificial intelligence at SXSW 2023. == Features == Prequel describes its app as an "Aesthetic Pic Editor. The app uses artificial intelligence to create and edit content. Prequel can be used to touch up faces on images and videos and can also tie various decorative elements to certain points on the human body and face. Prequel filters include the "Cartoon" filter, which converts selfies into cartoon-style pictures. Other filters include Kidcore, Dust, Grain, Fisheye, Retro Style, Miami, Disco, and VHS-style filters, as well as the ability to create Renaissance-style pictures. Prequel also gives users the ability to apply color correction tools and to make moving images with 3D effects out of 2D images. Prequel allows users to take photos and videos directly through the app and apply filters and effects in real time. The app also comes with manual editing options for photos, such as adjusting the brightness and/or exposure and cropping photos, as well as an option to automatically apply adjustments. The Prequel app uses the Core ML, MNN, and TFLight frameworks to work with its neural networks. Some AI solutions are launched server-side, and some on the user's mobile device. A resulting photo or video edited with the app is called "a prequel." The app daily generates over 2 million such prequels, which are published by users in Instagram, TikTok, and other social media. As of 2022, the app has more than 800 filters and effects, along with video templates and support for GIFs and stickers. Prequel is free-to-use, but has a premium version that gives users access to more effects, filters, and beauty tools. Since its launch in 2018, Prequel has been downloaded more than 100 million times.
Read more →
Social media in the financial services sector refers to the use of social media by the financial services sector to promote and distribute financial services. Social media is used in various aspects of the financial industry including customer service, marketing, and product development. It has enabled financial institutions to extend their reach through direct and real-time communication with customers, fostering more personal connections. It also allows individuals to talk to other individuals creating lending and trading via social groups as well as developing new financial services by fintech startup companies. In terms of marketing, social media is utilized by both traditional financial companies as well as disruptive fintech companies such as peer-to-peer lending (P2P) companies. The financial industry has used information technology since its inception in the 1960s and social media fits in with this ongoing development. Larger, traditional financial firms have integrated social media into their marketing strategies. Companies in the financial sector are subject to strict regulations that include how they use social media. In the United States, the Financial Industry Regulatory Authority (FINRA) is a key regulator that sets rules how financial firms can interact with consumers. This includes ensuring that social media posts follow financial advertising rules, such as being fair and balanced and not providing misleading information, and that financial advice is not provided by unqualified personnel, such as influencers. == History == In 2003, at the beginning of social media development, MySpace was founded as a "social networking service." It allowed people to create a profile, connect with other people, and post videos, pictures, and songs. As MySpace grew in popularity, it attracted interest from companies wishing to promote their brands on the social platform. They were joined by Facebook and in 2010 by Instagram. Financial service firms were initially slow to adapt to promotion via social media but soon joined other big firms after they saw the success other industries had in engaging with younger people. == Uses == === Branding === While companies are able to connect with more people remotely through providing online financial services, their branding strategy has shifted from customized to standardized. Prior to the outbreak of technology, most banks used customized branding where they targeted only customers in their regions. Businesses can now use technology to operate beyond their geographic location and maintain a consistent image across multiple countries with standardized branding. By being able to extend a consistent brand reputation across a wider geographic location, financial services companies can take advantage of economies of scale in advertising cost, lower administrative complexity, lower entry into new markets, and improved cross-border learning within the company. === Customer engagement === Online banking reduced face-to-face interaction between customers and their banks. Most banking transactions can now be conducted online or through mobile devices, rather than at a local branch with a teller. Social media provides a channel for firms to maintain personal contact with customers, replicating some of the interaction that was previously available at local branches. For example, a bank's Facebook page may feature an employee profile describing their job duties, which serves to present a more human face for larger institutions. === Lending === Social media is a core marketing channel for online peer-to-peer lending as well as small business lenders. Since these companies operate exclusively online, it makes sense for them to market online through social media channels. They are able to grow and find new lenders and buyers by utilizing social networks. === Trading === Social trading is an alternative way of analyzing financial data by looking at what other traders are doing and comparing, copying and discussing their techniques and strategies. Prior to the advent of social trading, investors and traders were relying on fundamental or technical analysis to form their investment decisions. Using social trading investors and traders could integrate into their investment decision-process social indicators from trading data-feeds of other traders. Investors also use platform like Reddit, Signal messaging or WeChat to create social communities to discuss investments and finance. In some cases they use this to join together using meme stocks to move financial markets, such as the 2021 GameStop short squeeze incident. They can also use social groups to launch and promote new products such as cryptocurrencies. Investing application like WeBull incorporate a forum style messaging system on each stock that is available for trading. Financial brokers such as Fidelity Investments, Interactive Brokers, and E-Trade have moved to incorporate community features in their investment apps. == Regulations == The use of social media by investors and financial services professionals for business purposes is subject to regulatory oversight, in the United States this is done primarily by the Financial Industry Regulatory Authority (FINRA). FINRA's rules, designed to protect investors from misleading information in all communications and this also applies to social media communications. This includes ensuring that social media posts follow financial advertising rules, such as being fair and balanced and not providing misleading information, and that advice is not provided by unqualified personnel, such as influencers and bank staff acting in a personal capacity. Financial firms have to maintain books and records of all interaction with customers and this includes social media. == New products and services == Social media has created entirely new products for the financial services sector, revolutionizing products and developing new industries through the merging of social technology and financial services. Fintech startups use social media to promote products to get them established. Several developing nations have used social media to leapfrog traditional financial technology; for example, WeChat Pay, which developed from the Chinese WeChat social media platform, became a major payment system in China within a few years. In 2015, according to consulting firm Accenture, 390 million people in China had registered to use mobile banking. This figure is more than the population of the United States. In the United States, the fintech company Venmo combines technology and financial services on a social platform. Other financial technology companies that have used social media to develop or promote financial products include: Lending Club – One of the first peer-to-peer lending businesses OnDeck Capital – A US online-only lending business Funding Circle – A UK-based online lending company Wise – A global online money transfers company Kabbage – A US online unsecured loan company later acquired by American Express Avant – A US online unsecured loan company Zopa – A UK online neobank providing peer-to-peer lending == Risks == === Reputational damage === Due to the real-time nature of social media, financial services companies can be impacted by potential reputational issues. Any negative experience by customers can easily be shared online and could become a viral phenomenon, those comments could likely have a detrimental effect on the company’s stock price and reputation. On the other hand, any positive experience a customer has can also be shared online. However, positive experiences are much less likely to become viral. === Scams === The nature of social media makes it easy to target individuals without being seen by the wider community, this allows scammers to target individuals. Example include romance scams such as the pig butchering scam where an individual is tricked to transfer funds or assets to the scammer over social media making it hard for law enforcement to track them or recover funds. === Customer privacy === Customer privacy is important for the financial services industry. It is critical that customer information such as a bank account numbers and other personal information is kept private. However, this information can be leaked if for example, a customer is unhappy with a bank’s service, they may tweet at the bank expressing their frustrations and include their name and account number.
Read more →
Bitcoin Satoshi Vision (BSV) is a cryptocurrency that is a hard fork of Bitcoin Cash. Bitcoin Satoshi Vision was created in November 2018 by a group of individuals led by Craig Steven Wright, who has claimed since 2015 to be Satoshi Nakamoto, the creator of the original bitcoin. == History == === 2018 split from Bitcoin Cash === On 15 November 2018, a hard fork chain split of Bitcoin Cash occurred between two rival factions called Bitcoin Cash and Bitcoin SV. On 15 November 2018 Bitcoin Cash traded at about $289, and Bitcoin SV traded at about $96.50, down from $425.01 on 14 November for the un-split Bitcoin Cash. The split originated from what was described as a "civil war" in two competing Bitcoin Cash camps. The first camp, supported by entrepreneur Roger Ver and Jihan Wu of Bitmain, promoted the software entitled Bitcoin ABC (short for Adjustable Blocksize Cap), which would maintain the block size at 32 MB. The second camp led by Craig Steven Wright and billionaire Calvin Ayre put forth a competing software version Bitcoin SV, short for "Bitcoin Satoshi Vision", which would increase the block size limit to 128 MB. === 2019 de-listing from Binance === In April 2019, an online feud broke out between those who supported the claims of Bitcoin SV supporter Craig Wright that he was Satoshi Nakamoto, and those who did not. The feud resulted in cryptocurrency exchange Binance de-listing Bitcoin SV from their platform, stating that: At Binance, we periodically review each digital asset we list to ensure that it continues to meet the high level of standard we expect. When a coin or token no longer meets this standard, or the industry changes, we conduct a more in-depth review and potentially delist it. We believe this best protects all of our users. When we conduct these reviews, we consider a variety of factors. Here are some that drive whether we decide to delist a digital asset: Commitment of team to project Level and quality of development activity Network / smart contract stability Level of public communication Responsiveness to our periodic due diligence requests Evidence of unethical / fraudulent conduct Contribution to a healthy and sustainable crypto ecosystem === 2021 network attack === In August 2021, Bitcoin SV suffered a 51% attack, after previously suffering attacks in June and July of the same year. Such an attack involves cryptocurrency miners gaining control of more than half of a network's computing power; these kinds of network attacks have the goal of preventing new transactions from gaining confirmations, allowing the attackers to double-spend coins. Adam James, senior editor at OKEx Insights claimed that "In the intermediate term, the attack has seemingly somewhat-negligible impact on its current price action," however "Faith in [Bitcoin SV] will likely be reduced following the incident." === 2024 high court ruling === In March 2024, Mr Justice James Mellor in the British High Court ruled that Wright is not Satoshi Nakamoto.
Read more →