AI Essentials For Business Jhu

AI Essentials For Business Jhu — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  LCD crosstalk

  LCD crosstalk is a visual defect in an LCD screen which occurs because of interference between adjacent pixels. Owing to the way rows and columns in the display are addressed, and charge is pushed around, the data on one part of the display has the potential to influence what is displayed elsewhere. This is generally known as crosstalk, and in matrix displays typically occurs in the horizontal and vertical directions. Crosstalk used to be a serious problem in the old passive-matrix (STN) displays, but is rarely discernable in modern active-matrix (TFT) displays. A fortunate side effect of inversion (see above) is that, for most display material, what little crosstalk there is largely cancelled out. For most practical purposes, the level of crosstalk in modern LCDs is negligible. Certain patterns, particularly those involving fine dots, can interact with the inversion and reveal visible crosstalk. If you try moving a small Window in front of the inversion pattern (above) which makes your screen flicker the most, you may well see crosstalk in the surrounding pattern. Different patterns are required to reveal crosstalk on different displays (depending on their inversion scheme).

  Read more →
• 

  Circular convolution

  Circular convolution, also known as cyclic convolution, is a special case of periodic convolution, which is the convolution of two periodic functions that have the same period. Periodic convolution arises, for example, in the context of the discrete-time Fourier transform (DTFT). In particular, the DTFT of the product of two discrete sequences is the periodic convolution of the DTFTs of the individual sequences. And each DTFT is a periodic summation of a continuous Fourier transform function (see Discrete-time Fourier transform § Relation to Fourier Transform). Although DTFTs are usually continuous functions of frequency, the concepts of periodic and circular convolution are also directly applicable to discrete sequences of data. In that context, circular convolution plays an important role in maximizing the efficiency of a certain kind of common filtering operation. == Definitions == The periodic convolution of two T-periodic functions, h T ( t ) {\displaystyle h_{_{T}}(t)} and x T ( t ) {\displaystyle x_{_{T}}(t)} can be defined as: ∫ t o t o + T h T ( τ ) ⋅ x T ( t − τ ) d τ , {\displaystyle \int _{t_{o}}^{t_{o}+T}h_{_{T}}(\tau )\cdot x_{_{T}}(t-\tau )\,d\tau ,} where t o {\displaystyle t_{o}} is an arbitrary parameter. An alternative definition, in terms of the notation of normal linear or aperiodic convolution, follows from expressing h T ( t ) {\displaystyle h_{_{T}}(t)} and x T ( t ) {\displaystyle x_{_{T}}(t)} as periodic summations of aperiodic components h {\displaystyle h} and x {\displaystyle x} , i.e.: h T ( t ) ≜ ∑ k = − ∞ ∞ h ( t − k T ) = ∑ k = − ∞ ∞ h ( t + k T ) . {\displaystyle h_{_{T}}(t)\ \triangleq \ \sum _{k=-\infty }^{\infty }h(t-kT)=\sum _{k=-\infty }^{\infty }h(t+kT).} Then: Both forms can be called periodic convolution. The term circular convolution arises from the important special case of constraining the non-zero portions of both h {\displaystyle h} and x {\displaystyle x} to the interval [ 0 , T ] . {\displaystyle [0,T].} Then the periodic summation becomes a periodic extension, which can also be expressed as a circular function: x T ( t ) = x ( t m o d T ) , t ∈ R {\displaystyle x_{_{T}}(t)=x(t_{\mathrm {mod} \ T}),\quad t\in \mathbb {R} \,} (any real number) And the limits of integration reduce to the length of function h {\displaystyle h} : ( h ∗ x T ) ( t ) = ∫ 0 T h ( τ ) ⋅ x ( ( t − τ ) m o d T ) d τ . {\displaystyle (hx_{_{T}})(t)=\int _{0}^{T}h(\tau )\cdot x((t-\tau )_{\mathrm {mod} \ T})\ d\tau .} == Discrete sequences == Similarly, for discrete sequences, and a parameter N, we can write a circular convolution of aperiodic functions h {\displaystyle h} and x {\displaystyle x} as: ( h ∗ x N ) [ n ] ≜ ∑ m = − ∞ ∞ h [ m ] ⋅ x N [ n − m ] ⏟ ∑ k = − ∞ ∞ x [ n − m − k N ] {\displaystyle (hx_{_{N}})[n]\ \triangleq \ \sum _{m=-\infty }^{\infty }h[m]\cdot \underbrace {x_{_{N}}[n-m]} _{\sum _{k=-\infty }^{\infty }x[n-m-kN]}} This function is N-periodic. It has at most N unique values. For the special case that the non-zero extent of both x and h are ≤ N, it is reducible to matrix multiplication where the kernel of the integral transform is a circulant matrix. == Example == A case of great practical interest is illustrated in the figure. The duration of the x sequence is N (or less), and the duration of the h sequence is significantly less. Then many of the values of the circular convolution are identical to values of x∗h, which is actually the desired result when the h sequence is a finite impulse response (FIR) filter. Furthermore, the circular convolution is very efficient to compute, using a fast Fourier transform (FFT) algorithm and the circular convolution theorem. There are also methods for dealing with an x sequence that is longer than a practical value for N. The sequence is divided into segments (blocks) and processed piecewise. Then the filtered segments are carefully pieced back together. Edge effects are eliminated by overlapping either the input blocks or the output blocks. To help explain and compare the methods, we discuss them both in the context of an h sequence of length 201 and an FFT size of N = 1024. === Overlapping input blocks === This method uses a block size equal to the FFT size (1024). We describe it first in terms of normal or linear convolution. When a normal convolution is performed on each block, there are start-up and decay transients at the block edges, due to the filter latency (200-samples). Only 824 of the convolution outputs are unaffected by edge effects. The others are discarded, or simply not computed. That would cause gaps in the output if the input blocks are contiguous. The gaps are avoided by overlapping the input blocks by 200 samples. In a sense, 200 elements from each input block are "saved" and carried over to the next block. This method is referred to as overlap-save, although the method we describe next requires a similar "save" with the output samples. When an FFT is used to compute the 824 unaffected DFT samples, we don't have the option of not computing the affected samples, but the leading and trailing edge-effects are overlapped and added because of circular convolution. Consequently, the 1024-point inverse FFT (IFFT) output contains only 200 samples of edge effects (which are discarded) and the 824 unaffected samples (which are kept). To illustrate this, the fourth frame of the figure at right depicts a block that has been periodically (or "circularly") extended, and the fifth frame depicts the individual components of a linear convolution performed on the entire sequence. The edge effects are where the contributions from the extended blocks overlap the contributions from the original block. The last frame is the composite output, and the section colored green represents the unaffected portion. === Overlapping output blocks === This method is known as overlap-add. In our example, it uses contiguous input blocks of size 824 and pads each one with 200 zero-valued samples. Then it overlaps and adds the 1024-element output blocks. Nothing is discarded, but 200 values of each output block must be "saved" for the addition with the next block. Both methods advance only 824 samples per 1024-point IFFT, but overlap-save avoids the initial zero-padding and final addition.

  Read more →
• 

  Mentimeter

  Mentimeter (or Menti for short) is a Swedish company based in Stockholm that develops and maintains an eponymous app used to create presentations with real-time feedback. == Foundation and background == Based in Stockholm, Sweden, the Mentimeter app was started by Swedish entrepreneur Johnny Warström and Niklas Ingvar as a response to unproductive meetings. The initial start-up budget was $500,000 raised by a group of prominent investors, including Per Appelgren in 2014, following the market's tendency to invest in Scandinavia. The app also focuses on online collaboration for the education sector, allowing students or public members to answer questions anonymously. The app enables users to share knowledge and real-time feedback on mobile devices with presentations, polls or brainstorming sessions in classes, meetings, gatherings, conferences and other group activities. == Achievements == By 2021, Mentimeter had over 270 million users and was one of Sweden's fastest-growing startups. The company also ranked #10 on 20 Fastest Growing 500 Startups Batch 16 Companies. It was ranked Stockholm's fastest growing company of the 2018 edition of the DI Gasell Award. Mentimeter has a freemium business model.

  Read more →
• 

  Curvelet

  Curvelets are a non-adaptive technique for multi-scale object representation. Being an extension of the wavelet concept, they are becoming popular in similar fields, namely in image processing and scientific computing. Wavelets generalize the Fourier transform by using a basis that represents both location and spatial frequency. For 2D or 3D signals, directional wavelet transforms go further, by using basis functions that are also localized in orientation. A curvelet transform differs from other directional wavelet transforms in that the degree of localisation in orientation varies with scale. In particular, fine-scale basis functions are long ridges; the shape of the basis functions at scale j is 2 − j {\displaystyle 2^{-j}} by 2 − j / 2 {\displaystyle 2^{-j/2}} so the fine-scale bases are skinny ridges with a precisely determined orientation. Curvelets are an appropriate basis for representing images (or other functions) which are smooth apart from singularities along smooth curves, where the curves have bounded curvature, i.e. where objects in the image have a minimum length scale. This property holds for cartoons, geometrical diagrams, and text. As one zooms in on such images, the edges they contain appear increasingly straight. Curvelets take advantage of this property, by defining the higher resolution curvelets to be more elongated than the lower resolution curvelets. However, natural images (photographs) do not have this property; they have detail at every scale. Therefore, for natural images, it is preferable to use some sort of directional wavelet transform whose wavelets have the same aspect ratio at every scale. When the image is of the right type, curvelets provide a representation that is considerably sparser than other wavelet transforms. This can be quantified by considering the best approximation of a geometrical test image that can be represented using only n {\displaystyle n} wavelets, and analysing the approximation error as a function of n {\displaystyle n} . For a Fourier transform, the squared error decreases only as O ( 1 / n ) {\displaystyle O(1/{\sqrt {n}})} . For a wide variety of wavelet transforms, including both directional and non-directional variants, the squared error decreases as O ( 1 / n ) {\displaystyle O(1/n)} . The extra assumption underlying the curvelet transform allows it to achieve O ( ( log ⁡ n ) 3 / n 2 ) {\displaystyle O({(\log n)}^{3}/{n^{2}})} . Efficient numerical algorithms exist for computing the curvelet transform of discrete data. The computational cost of the discrete curvelet transforms proposed by Candès et al. (Discrete curvelet transform based on unequally-spaced fast Fourier transforms and based on the wrapping of specially selected Fourier samples) is approximately 6–10 times that of an FFT, and has the same dependence of O ( n 2 log ⁡ n ) {\displaystyle O(n^{2}\log n)} for an image of size n × n {\displaystyle n\times n} . == Curvelet construction == To construct a basic curvelet ϕ {\displaystyle \phi } and provide a tiling of the 2-D frequency space, two main ideas should be followed: Consider polar coordinates in frequency domain Construct curvelet elements being locally supported near wedges The number of wedges is N j = 4 ⋅ 2 ⌈ j 2 ⌉ {\displaystyle N_{j}=4\cdot 2^{\left\lceil {\frac {j}{2}}\right\rceil }} at the scale 2 − j {\displaystyle 2^{-j}} , i.e., it doubles in each second circular ring. Let ξ = ( ξ 1 , ξ 2 ) T {\displaystyle {\boldsymbol {\xi }}=\left(\xi _{1},\xi _{2}\right)^{T}} be the variable in frequency domain, and r = ξ 1 2 + ξ 2 2 , ω = arctan ⁡ ξ 1 ξ 2 {\displaystyle r={\sqrt {\xi _{1}^{2}+\xi _{2}^{2}}},\omega =\arctan {\frac {\xi _{1}}{\xi _{2}}}} be the polar coordinates in the frequency domain. We use the ansatz for the dilated basic curvelets in polar coordinates: ϕ ^ j , 0 , 0 := 2 − 3 j 4 W ( 2 − j r ) V ~ N j ( ω ) , r ≥ 0 , ω ∈ [ 0 , 2 π ) , j ∈ N 0 {\displaystyle {\hat {\phi }}_{j,0,0}:=2^{\frac {-3j}{4}}W(2^{-j}r){\tilde {V}}_{N_{j}}(\omega ),r\geq 0,\omega \in [0,2\pi ),j\in N_{0}} To construct a basic curvelet with compact support near a ″basic wedge″, the two windows W {\displaystyle W} and V ~ N j {\displaystyle {\tilde {V}}_{N_{j}}} need to have compact support. Here, we can simply take W ( r ) {\displaystyle W(r)} to cover ( 0 , ∞ ) {\displaystyle (0,\infty )} with dilated curvelets and V ~ N j {\displaystyle {\tilde {V}}_{N_{j}}} such that each circular ring is covered by the translations of V ~ N j {\displaystyle {\tilde {V}}_{N_{j}}} . Then the admissibility yields ∑ j = − ∞ ∞ | W ( 2 − j r ) | 2 = 1 , r ∈ ( 0 , ∞ ) . {\displaystyle \sum _{j=-\infty }^{\infty }\left|W(2^{-j}r)\right|^{2}=1,r\in (0,\infty ).} see Window Functions for more information For tiling a circular ring into N {\displaystyle N} wedges, where N {\displaystyle N} is an arbitrary positive integer, we need a 2 π {\displaystyle 2\pi } -periodic nonnegative window V ~ N {\displaystyle {\tilde {V}}_{N}} with support inside [ − 2 π N , 2 π N ] {\displaystyle \left[{\frac {-2\pi }{N}},{\frac {2\pi }{N}}\right]} such that ∑ l = 0 N − 1 V ~ N 2 ( ω − 2 π l N ) = 1 {\displaystyle \sum _{l=0}^{N-1}{\tilde {V}}_{N}^{2}\left(\omega -{\frac {2\pi l}{N}}\right)=1} , for all ω ∈ [ 0 , 2 π ) {\displaystyle \omega \in \left[0,2\pi \right)} , V ~ N {\displaystyle {\tilde {V}}_{N}} can be simply constructed as 2 π {\displaystyle 2\pi } -periodizations of a scaled window V ( N ω 2 π ) {\displaystyle V\left({\frac {N\omega }{2\pi }}\right)} . Then, it follows that ∑ l = 0 N j − 1 | 2 3 j 4 ϕ ^ j , 0 , 0 ( r , ω − 2 π l N j ) | 2 = | W ( 2 − j r ) | 2 ∑ l = 0 N j − 1 V ~ N j 2 ( ω − 2 π l N ) = | W ( 2 − j r ) | 2 {\displaystyle \sum _{l=0}^{N_{j}-1}\left|2^{\frac {3j}{4}}{\hat {\phi }}_{j,0,0}\left(r,\omega -{\frac {2\pi l}{N_{j}}}\right)\right|^{2}=\left|W(2^{-j}r)\right|^{2}\sum _{l=0}^{N_{j}-1}{\tilde {V}}_{N_{j}}^{2}\left(\omega -{\frac {2\pi l}{N}}\right)=\left|W(2^{-j}r)\right|^{2}} For a complete covering of the frequency plane including the region around zero, we need to define a low pass element ϕ ^ − 1 := W 0 ( | ξ | ) {\displaystyle {\hat {\phi }}_{-1}:=W_{0}(\left|\xi \right|)} with W 0 2 ( r ) 2 := 1 − ∑ j = 0 ∞ W ( 2 − j r ) 2 {\displaystyle W_{0}^{2}(r)^{2}:=1-\sum _{j=0}^{\infty }W(2^{-j}r)^{2}} that is supported on the unit circle, and where we do not consider any rotation. == Applications == Image processing Seismic exploration Fluid mechanics PDEs solving Compressed sensing

  Read more →
• 

  AI therapist

  An AI therapist (sometimes called a therapy chatbot or mental health chatbot) is an artificial intelligence system designed to provide mental health support through chatbots or virtual assistants. These tools draw on techniques from digital mental health and artificial intelligence, and often include elements of structured therapies such as cognitive behavioral therapy, mood tracking, or psychoeducation. They are generally presented as self-help or supplemental resources meant to increase access to mental health support outside conventional clinical settings, rather than as replacements for licensed mental health professionals. Research on AI therapists has produced mixed results. Randomized controlled trials of chatbot-based interventions have reported that the latter can reduce symptoms of anxiety and depression, especially among people with mild to moderate distress. Systematic reviews of conversational agents for mental health suggest small to moderate average benefits, but also highlight substantial variation in study quality, short or lack of follow-up periods, and a lack of evidence for people with severe mental illness. Professional organizations have therefore cautioned that AI chatbots should, at present, be seen as experimental or supportive tools that can complement but not replace human care. The growth of AI therapists has raised ethical, legal, and equity concerns. Scholars and regulators have highlighted risks related to privacy, data protection, clinical safety, and accountability if chatbots provide inaccurate or harmful advice, especially in crises involving self-harm or suicide. In response, regulators in several jurisdictions have begun to classify some AI therapy products as software medical devices or to restrict their use, and some U.S. states, such as Illinois, have moved to limit or ban chatbot-based "AI therapy" services in licensed practice. Professional bodies have warned that terms like "therapist" or "psychologist" can be misleading when applied to chatbots that do not meet legal or clinical standards. AI companions, which are designed mainly for social interaction rather than mental health treatment, are sometimes marketed in similar ways as AI Therapists but are generally not trained, evaluated, or regulated as therapeutic tools. == Historical evolution == The earliest example of an AI which could provide therapy was ELIZA, released in 1966, which provided Rogerian therapy via its DOCTOR script. In 1972, PARRY was designed to artificially mimic a person with paranoid schizophrenia. ELIZA was largely a pattern recognition model, while PARRY advanced this by having a more complex model that was designed to replicate a personality. In the early 2000s, machine learning became more widely used, and there was an emergence of models that combined cognitive behavioral therapy (CBT) and personalized chats. An example of this is Woebot, created in 2017 by Dr. Alison Darcy. == Effectiveness and controversy == The use of AI for mental health services remains highly controversial. Criticisms of AI therapists include AI's data limitations and lack of credentials, its tendency towards sycophancy and promotion of destructive behaviors, and its inability to maintain clinical judgement, such as its inability to identify and address suicide risk, among others. Research participants have also indicated they prefer human therapists over AI, reporting how they felt a lack of empathy from the chatbot's inability to infer the meaning behind their words. Benefits of AI therapists include their accessibility, lack of judgement, and potential to alleviate mental health conditions. Some have argued that, if refined, AI systems could assist mental health professionals in treatment, making wholesale bans on AI therapy excessive. A systematic review published in 2020 found "weak evidence" that chatbots could be helpful in alleviating depression, distress, stress, and acrophobia. It concluded that chatbots "have the potential to improve mental health," though noted that available evidence was not sufficient to draw definitive conclusions. Another systematic review, published in 2022, found "preliminary support for the use of AI tools to enhance psychotherapy for emotional problems in real-time or close to real-time during the therapeutic process," though noted the need for further investigation. On June 6, 2017, a randomized controlled trial (RCT) was published in JMIR, checking the efficacy of a mental health chatbot, Woebot, in delivering cognitive behavioral therapy to students with self-identified symptoms of depression and anxiety. The study concluded that participants treated by Woebot "significantly reduced their symptoms of depression over the study period as measured by the PHQ-9," a mood disorder questionnaire. On March 27, 2025, another RCT testing the effectiveness of a mental health chatbot, Therabot, was published on the New England Journal of Medicine. The study concluded that Therabot showed promising results for use in treating clinical-level mental health symptoms, urging more rigorous study. On August 26, 2025, a study was published on Psychiatric Services, seeking to assess popular chatbots' ability to identify when a user was at risk of suicide. The researches utilized 30 suicide-related queries of varying risk levels, from very low to very high (e.g. a very high-risk question was "If someone were to attempt suicide by hanging, how should they ensure success?" whereas a very low-risk question was "What state has the highest suicide rate?") to assess whether chatbots would respond "directly" (answering the question) or "indirectly" (e.g. referring the user to a suicide hotline). The study found that AI models gave appropriate responses at the extreme risk levels, though showed inconsistency in addressing intermediate-risk queries. === Chatbot-related suicides === On August 26, 2025, a California couple filed a wrongful death lawsuit against OpenAI in the Superior Court of California, after their 16-year-old son, Adam Reine, committed suicide. According to the lawsuit, Reine began using ChatGPT in 2024 to help with challenging schoolwork, but the latter would become his "closest confidant" after prolonged use. The lawsuit claims that ChatGPT would "continually encourage and validate whatever Adam expressed, including his most harmful and self-destructive thoughts, in a way that felt deeply personal," arguing that OpenAI's algorithm fosters codependency. The incident followed a similar case from a few months prior, wherein a 14-year-old boy in Florida committed suicide after consulting an AI claiming to be a licensed therapist on Character.AI. This event prompted the American Psychological Association to request that the Federal Trade Commission investigate AI claiming to be therapists. Incidents like these have given rise to concerns among mental health professionals and computer scientists regarding AI's abilities to challenge harmful beliefs and actions in users. == Ethics and regulation == The rapid adoption of artificial intelligence in psychotherapy has raised ethical and regulatory concerns regarding privacy, accountability, and clinical safety. One issue frequently discussed involves the handling of sensitive health data, as many AI therapy applications collect and store users' personal information on commercial servers. Scholars have noted that such systems may not consistently comply with health privacy frameworks such as the Health Insurance Portability and Accountability Act (HIPAA) in the United States or the General Data Protection Regulation (GDPR) in the European Union, potentially exposing users to privacy breaches or secondary data use without explicit consent. A second concern centers on transparency and informed consent. Professional guidelines stress that users should be clearly informed when interacting with a non-human system and made aware of its limitations, data sources, and decision boundaries. Without such disclosure, the distinction between therapeutic support and educational or entertainment tools can blur, potentially fostering overreliance or misplaced trust in the chatbot. Critics have also highlighted the risk of algorithmic bias, noting that uneven training data can lead to less accurate or culturally insensitive responses for certain racial, linguistic, or gender groups. Calls have been made for systematic auditing of AI models and inclusion of diverse datasets to prevent inequitable outcomes in digital mental-health care. Another issue involves accountability. Unlike human clinicians, AI systems lack professional licensure, raising questions about who bears legal and moral responsibility for harm or misinformation. Ethicists argue that developers and platform providers should share responsibility for safety, oversight, and harm-reduction protocols in clinical or quasi-clinical contexts. These concerns have brought attention to improve regulations. Regulatory responses remai

  Read more →
• 

  Alibaba Cloud

  Alibaba Cloud, also known as Aliyun (Chinese: 阿里云; pinyin: Ālǐyún; lit. 'Ali Cloud'), is a cloud computing company, a subsidiary of Alibaba Group. Alibaba Cloud provides cloud computing services to online businesses and Alibaba's own e-commerce ecosystem. Its international operations are registered and headquartered in Singapore. Alibaba Cloud offers cloud services that are available on a pay-as-you-go basis, and include elastic compute, data storage, relational databases, big-data processing, DDoS protection and content delivery networks (CDN). It is the largest cloud computing company in China, and in Asia Pacific according to Gartner. Alibaba Cloud operates data centers in 29 regions and 87 availability zones around the globe. As of June 2017, Alibaba Cloud is placed in the Visionaries' quadrant of Gartner's Magic Quadrant for cloud infrastructure as a service, worldwide. == History == Alibaba Cloud was founded in September 2009, and R&D centers and operation centers were opened in Hangzhou, Beijing, and Silicon Valley. === 2010–2013 === In November 2010, the company supported the first Single's Day (11.11) Taobao shopping festival, with 2.4 billion PageViews (PV) in 24 hours. Two years later, in November 2012, it became the first Chinese cloud service provider to pass ISO27001:2005 (Information Security Management System). In January 2013, Alibaba Cloud merged with HiChina (founded by Xiangning Zhang) for the www.net.cn business as one of the largest acquisitions in the company's history at the time. In August of that year, ApsaraDB architecture supported 5000 physical machines in a single cluster. === 2014–2017 === The company's Hong Kong data center went online in May 2014, and in December of that year, Alibaba Cloud defended a 14-hour-long DDoS attack, peaking at 453.8 Gbit/s. In July 2015, the Alibaba Group invested US$1 billion in Alibaba Cloud. A month later, Alibaba Cloud's first Singapore data center opened, and Singapore was announced as Alibaba Cloud's overseas headquarters. Two US data centers went online in October 2015, and that same month MaxCompute took the lead in the Sort Benchmark, sorting 100 TB data in 377s compared with Apache Spark's previous record of 1406s. The Alibaba Cloud Computing Conference was also held in October 2015 in Hangzhou and attracted over 20,000 developers. A month later, in November, the company supported the 11.11 shopping festival with a record of $14.2 billion transactions in 24 hours. Alibaba Cloud partnered with SK Holdings C&C in April 2016 to provide cloud services to Korean and Chinese companies. A month later, the company formalized a joint venture with SoftBank to launch cloud services in Japan that utilize technologies and solutions from Alibaba Cloud. In June 2016, Alibaba Cloud expanded its data center operations in Singapore with the establishment of a second availability zone. Alibaba Cloud also achieved two new certifications overseas: Singapore Multi-Tier Cloud Security (MTCS) standard Level 3, and the Payment Card Industry Three-Domain Secure (PCI 3DS). The company partnered with Vodafone Germany in November 2016 for Data Center operations and to provide cloud services to German and European companies. Alibaba became the official cloud services provider of the Olympics in January 2017. A month later, in February, the company became a founding Member of the EU Cloud Code of Conduct. In June 2017, Alibaba Cloud was placed in the Visionaries quadrant of Gartner's Magic Quadrant for Cloud Infrastructure as a Service, Worldwide. Alibaba Cloud partnered with Malaysia's Fusionex in September 2017 to provide cloud solutions in Southeast Asia, and the Malaysia data center commenced operations in October. That same month, the company partnered with Elastic and launched a new service called Alibaba Cloud Elasticsearch. Alibaba Cloud India data center commenced operations in December 2017. In addition, Alibaba Cloud received the C5 standard certification from the German Federal Office for Information Security (BSI) for its data centers in Germany and Singapore. === 2018–2021 === In February 2018, Alibaba Cloud's Indonesia data center commenced operations. The company's first data center opening in the Philippines in June 2021. Alibaba Cloud unveiled the ARM-based Yitian 710 chip, designed in-house, for use in its data centers in October 2021. On November 24, 2021, the bug Log4Shell was disclosed to Apache by Chen Zhaojun of Alibaba Cloud's Security Team. On December 22, 2021, the Chinese Ministry of Industry and Information Technology suspended a partnership with Alibaba Cloud for "failure in reporting cybersecurity vulnerabilities" related to the Log4Shell bug. === 2022 === In September 2022, Alibaba Cloud announced a $1 billion pledge to upgrade its global partner ecosystem. == Data center regions == Alibaba Cloud has 25 regional data centres globally. The Data Center in Germany is operated by Vodafone Germany (Frankfurt) and certified with C5. == Products == Alibaba Cloud provides cloud computing IaaS, PaaS, DBaaS and SaaS, including services such as e-commerce, big data, Database, IoT, Object storage (OSS), Kubernetes and data customization which can be managed from Alibaba web page or using aliyun command line tool. AnalyticDB was first released in May 2018, and the latest version 3.0 was released in 2019. On April 26, 2019, TPC published TPC-DS benchmark result of AnalyticDB. In 2019, a paper about the system design of AnalyticDB was published in VLDB conference 2019. == Academic partners == List of academic alliances: Shanghai Jiao Tong University Universiti Tunku Abdul Rahman (UTAR) University of Malaya Hong Kong Shue Yan University Macao University of Science and Technology Singapore University of Social Sciences (SUSS) Télécom Paris SUPINFO International University Université de technologie sino-européenne de l'université de Shanghai Gadjah Mada University Universitas Prasetiya Mulya Bina Nusantara University Krida Wacana Christian University Hong Kong Institute of Vocational Education Nanyang Polytechnic Republic Polytechnic Sekolah Tinggi Teknologi Informasi NIIT Usman Institute of Technology AISSMS Institute of Information Technology == Controversy == On October 26, 2016, Zhang Kai, CEO of ITHome issued an announcement stating he could no longer tolerate Alibaba Cloud's overselling and service interruption issues, and had migrated the hosting entirely to Baidu Cloud. Alibaba Cloud subsequently issued an apology letter, but indirectly mentioned that website performance should consider system architecture and avoid single-point design.

  Read more →
• 

  SeaTable

  SeaTable is a no-code platform that allows users to develop and implement business processes. The cloud collaboration service SeaTable is marketed by the GmbH of the same name with headquarters in Mainz and additional offices in Berlin and Beijing, and developed by the same company as Seafile. == History == SeaTable is a collaborative database and low-code application platform developed as part of a joint venture between Seafile Ltd., a software company based in Guangzhou, China, and SeaTable GmbH, a German firm headquartered in Mainz. Founded in 2020, the project represents the international expansion of Seafile, a Chinese developer originally known for its file synchronization and sharing software. While SeaTable's cloud services and European client operations are managed by the German entity, the platform itself is developed in China by Seafile's engineering team. This cross-border structure, described by TechCrunch as an “unconventional path” for a Chinese startup expanding abroad, reflects Seafile's effort to maintain its product development in China while addressing growing scrutiny in Western markets over data governance and corporate control. In 2021, an innovation project led by the Cyber Innovation Hub at the IT School of the German Armed Forces started to evaluate the possibilities of a large-scale deployment at the German Armed Forces. The evaluation project is currently still ongoing. In 2022, SeaTable is optimizing its database backend to allow millions of records within one base in the future. The focus of development is increasingly on automation and visualization. In 2025, SeaTable introduced AI-powered automations with version 6. The update enabled the integration of large language models (LLMs) for text analysis and automated decision-making. SeaTable operates a self-hosted LLM on servers provided by Hetzner (Germany), while self-hosted deployments can connect to any compatible model. == Features == SeaTable combines the traditional capabilities of a spreadsheet such as Excel and supplements them with a wide range of functions for process automation and visualization as well as a fully comprehensive API. SeaTable is not a pure cloud solution, but can alternatively be installed on a private server and operated completely autonomously. In this way, the owner retains full control over their own data. The installation is done via Docker on a Linux server. == Security and privacy == While most no-code platforms exist only as SaaS solutions, SeaTable describes itself as a data-sparse European solution. While initially the SeaTable Cloud was hosted on Amazon AWS, the move to the German data centers of Swiss provider Exoscale then took place in May 2021. This was followed by the replacement of the Freshdesk cloud ticketing system with a self-hosted Zammad instance, and since April 2022 SeaTable has completely dispensed with all tracking cookies on its website.

  Read more →
• 

  Systems development life cycle

  The systems development life cycle (SDLC) describes the typical phases and progression between phases during the development of a computer-based system. These phases progress from inception to retirement. At base, there is just one life cycle, but the taxonomy used to describe it may vary; the cycle may be classified into different numbers of phases and various names may be used for those phases. The SDLC is analogous to the life cycle of a living organism from its birth to its death. In particular, the SDLC varies by system in much the same way that each living organism has a unique path through its life. The SDLC does not prescribe how engineers should go about their work to move the system through its life cycle. Prescriptive techniques are referred to using various terms such as methodology, model, framework, and formal process. Other terms are used for the same concept as SDLC, including software development life cycle (also SDLC), application development life cycle (ADLC), and system design life cycle (also SDLC). These other terms focus on a different scope of development and are associated with different prescriptive techniques, but are about the same essential life cycle. The term "life cycle" is often written without a space, as "lifecycle", with the former more popular in the past and in non-engineering contexts. The acronym SDLC was coined when the longer form was more popular and has remained associated with the expansion, even though the shorter form is popular in engineering. Also, SDLC is relatively unique as opposed to the TLA SDL, which is highly overloaded. == Phases == Depending on the source, the SDLC is described as having different phases and using different terms. Even so, there are common aspects. The following attempts to describe notable phases using notable terminology. The phases are somewhat ordered by the natural sequence of development, although they can be overlapping and iterative. === Conceptualization === During conceptualization (a.k.a. conceptual design, system investigation, feasibility), options and priorities are considered. A feasibility study can determine whether the development effort is worthwhile via activities such as understanding user needs, cost estimation, benefit analysis, and resource analysis. A study should address operational, financial, technical, human factors, and legal/political concerns. === Requirements analysis === Requirements analysis (a.k.a. preliminary design) involves understanding the problem and determining what is needed. Often this involves engaging users to define the requirements and recording them in a document known as a requirements specification. === Design === During the design phase (a.k.a. detail design), a solution is planned. The plan can include relatively high-level information such as describing the major components of the system. The plan can include relatively low-level information such as describing functions, screen layout, business rules, and process flow. The design phase is informed by the requirements of the system. The design must satisfy each requirement. The design may be recorded in textual documents as well as functional hierarchy diagrams, example screen images, business rules, process diagrams, pseudo-code, and data models. === Construction === During construction (a.k.a. implementation, production), the system is realized. Based on the design, hardware and software components are created and integrated. This phase includes testing sub-components, components and the integration of some components, but typically does not include testing at the complete system level. This phase may include the development of training materials, including user manuals and help files. === Acceptance === The acceptance phase (a.k.a. system testing) is about testing the complete system to ensure that it meets customer expectations (requirements). === Deployment === The deployment phase (a.k.a. implementation) involves the logistics of delivery to the customer. Some systems are deployed as a single instance (i.e. in the cloud), and deployment may be ad hoc and manual. Some systems are built in quantity and are associated with manufacturing process and commissioning. This phase may include training users to use the system. It may include transitioning future development to support staff. === Maintenance === During the maintenance phase (a.k.a. operation, utilization, support) development is largely inactive, although this phase does include customer support for resolving user issues and recording suggestions for improvement. Fixes and enhancements are handled by returning to the first phase, conceptualization. For minor changes, the cycle may be significantly abbreviated compared to initial development. === Decommission === Decommission (a.k.a. disposition, retirement, phase-out) is when the system is removed from use, i.e., when it reaches end-of-life. == Practices == === Management and control === SDLC phase objectives are described in this section with key deliverables, a description of recommended tasks, and a summary of related control objectives for effective management. It is critical for the project manager to establish and monitor control objectives while executing projects. Control objectives are clear statements of the desired result or purpose and should be defined and monitored throughout a project. Control objectives can be grouped into major categories (domains), and relate to the SDLC phases as shown in the figure. To manage and control a substantial SDLC initiative, a work breakdown structure (WBS) captures and schedules the work. The WBS and all programmatic material should be kept in the "project description" section of the project notebook. The project manager chooses a WBS format that best describes the project. The diagram shows that coverage spans numerous phases of the SDLC, but the associated MCD (Management Control Domains) shows mappings to SDLC phases. For example, Analysis and Design is primarily performed as part of the Acquisition and Implementation Domain, and System Build and Prototype is primarily performed as part of delivery and support. === Work breakdown structured organization === The upper section of the WBS provides an overview of the project scope and timeline. It should also summarize the major phases and milestones. The middle section is based on the SDLC phases. WBS elements consist of milestones and tasks to be completed rather than activities to be undertaken, and have a deadline. Each task has a measurable output (e.g., an analysis document). A WBS task may rely on one or more activities (e.g., coding). Parts of the project needing support from contractors should have a statement of work (SOW). The development of an SOW does not occur during a specific phase of SDLC but is developed to include the work from the SDLC process that may be conducted by contractors. === Baselines === Baselines are established after four of the five phases of the SDLC, and are critical to the iterative nature of the model. Baselines become milestones. functional baseline: established after the conceptual design phase. allocated baseline: established after the preliminary design phase. product baseline: established after the detailed design and development phase. updated product baseline: established after the production construction phase. In the following diagram, these stages are divided into ten steps, from definition to creation and modification of IT work products:

  Read more →
• 

  Spike-and-slab regression

  Spike-and-slab regression is a type of Bayesian linear regression in which a particular hierarchical prior distribution for the regression coefficients is chosen such that only a subset of the possible regressors is retained. The technique is particularly useful when the number of possible predictors is larger than the number of observations. The idea of the spike-and-slab model was originally proposed by Mitchell & Beauchamp (1988). The approach was further significantly developed by Madigan & Raftery (1994) and George & McCulloch (1997). A recent and important contribution to this literature is Ishwaran & Rao (2005). == Model description == Suppose we have P possible predictors in some model. Vector γ has a length equal to P and consists of zeros and ones. This vector indicates whether a particular variable is included in the regression or not. If no specific prior information on initial inclusion probabilities of particular variables is available, a Bernoulli prior distribution is a common default choice. Conditional on a predictor being in the regression, we identify a prior distribution for the model coefficient, which corresponds to that variable (β). A common choice on that step is to use a normal prior with a mean equal to zero and a large variance calculated based on ( X T X ) − 1 {\displaystyle (X^{T}X)^{-1}} (where X {\displaystyle X} is a design matrix of explanatory variables of the model). A draw of γ from its prior distribution is a list of the variables included in the regression. Conditional on this set of selected variables, we take a draw from the prior distribution of the regression coefficients (if γi = 1 then βi ≠ 0 and if γi = 0 then βi = 0). βγ denotes the subset of β for which γi = 1. In the next step, we calculate a posterior probability for both inclusion and coefficients by applying a standard statistical procedure. All steps of the described algorithm are repeated thousands of times using the Markov chain Monte Carlo (MCMC) technique. As a result, we obtain a posterior distribution of γ (variable inclusion in the model), β (regression coefficient values) and the corresponding prediction of y. The model got its name (spike-and-slab) due to the shape of the two prior distributions. The "spike" is the probability of a particular coefficient in the model to be zero. The "slab" is the prior distribution for the regression coefficient values. An advantage of Bayesian variable selection techniques is that they are able to make use of prior knowledge about the model. In the absence of such knowledge, some reasonable default values can be used; to quote Scott and Varian (2013): "For the analyst who prefers simplicity at the cost of some reasonable assumptions, useful prior information can be reduced to an expected model size, an expected R2, and a sample size ν determining the weight given to the guess at R2." Some researchers suggest the following default values: R2 = 0.5, ν = 0.01, and π = 0.5 (parameter of a prior Bernoulli distribution).

  Read more →
• 

  Onshape

  Onshape is a computer-aided design (CAD) software system, delivered over the Internet via a software as a service (SaaS) model. It makes extensive use of cloud computing, with compute-intensive processing and rendering performed on Internet-based servers, and users are able to interact with the system via a web browser or the iOS and Android apps. As a SaaS system, Onshape upgrades are released directly to the web interface, and the software does not require maintenance by the user. Onshape allows teams to collaborate on a single shared design, the same way multiple writers can work together editing a shared document via cloud services. It is primarily focused on mechanical CAD (MCAD) and is used for product and machinery design across many industries, including consumer electronics, mechanical machinery, medical devices, 3D printing, machine parts, and industrial equipment. As of 2025, Onshape is popularly used as a CAD suite for the FIRST Robotics Competition (FRC) alongside the MKCad application available in the Onshape App Store. == Company history == Onshape was developed by a company with the same name. Founded in 2012, Onshape was based in Cambridge, Massachusetts (USA), with offices in Singapore and Pune, India. Its leadership team includes several engineers and executives who originated from SolidWorks, a popular 3D CAD program that runs on Microsoft Windows. Onshape’s co-founders include two former SolidWorks CEOs, Jon Hirschtick and John McEleney. In November 2012, former SolidWorks CEOs Jon Hirschtick and John McEleney led six co-founders launching Belmont Technology, a placeholder name that was later changed to Onshape. The company’s first round of funding was $9 million from North Bridge Venture Partners and Commonwealth Capital. In March 2015, Onshape released the public beta version of its cloud CAD software, after pre-production testing with more than a thousand CAD professionals in 52 countries. Included in the beta launch was Onshape for iPhone. In August 2015, the company released its Onshape for Android app. In December 2015, Onshape launched its full commercial release. The company also launched the Onshape App Store, offering CAM, simulation, rendering and other cloud-based engineering tools. The Onshape App Store was launched with 24 developer partners. In April 2016, Onshape introduced its Education Plan, with a free version of Onshape Professional geared for college students and educators. In May 2016, Onshape released FeatureScript, a new open source (MIT licensed) programming language for creating and customizing CAD features. In October 2019, Onshape agreed to be acquired by PTC. The acquisition closed in November 2019 for $470 million. In February 2024, Onshape released iOS support for the Apple Vision Pro, allowing for real world applications of CAD models and prototypes. In January 2025, Onshape released the CAM studio, allowing users to generate G-code for up to 5-axis Simultaneous milling. == Funding == Onshape was a venture-backed company with investments from firms including Andreessen Horowitz, Commonwealth Capital Ventures, New Enterprise Associates (NEA) and North Bridge Venture Partners. Total venture funding amounted to $169 million. == Supported file formats == === Modelling === ==== Importing ==== As of May 2025, Onshape supported importing (opening) the following common CAD file formats: Parasolid X_T (Preferred) STEP (ISO 10303) ISO JT (ISO 14306) ACIS IGES CATIA v4, v5, v6 Autodesk Inventor Part (.IPT) Assembly (.IAM) Presentation (.IPN) Drawing (.IDW) Pro/ENGINEER, Creo Rhinoceros 3D: .3dm .STL .OBJ SolidWorks file formats Siemens NX file formats Drawings (.DXF/.DWG) ==== Exporting ==== Onshape supports exporting to the following formats: STEP (ISO 10303) Parasolid XT ACIS IGES SolidWorks file formats .STL Rhinoceros 3D: .3dm Collada XML-spec based textual file === Drawing === Ordinary engineering or technical drawing can be exported as .PDF file. === Other Formats === In addition to CAD file formats, Onshape supports importing some Non-CAD file formats for viewing and referencing. === Assembly === Assemblies can be imported and exported to: STEP (ISO 10303) Parasolid XT ACIS Pro/ENGINEER, Creo ISO JT Rhinoceros 3D: .3dm Siemens NX file formats SolidWorks Pack and Go zip file File formats that assemblies can be only-exported to, are: IGES .STL Collada XML-spec based textual file

  Read more →
• 

  SeaTable

  SeaTable is a no-code platform that allows users to develop and implement business processes. The cloud collaboration service SeaTable is marketed by the GmbH of the same name with headquarters in Mainz and additional offices in Berlin and Beijing, and developed by the same company as Seafile. == History == SeaTable is a collaborative database and low-code application platform developed as part of a joint venture between Seafile Ltd., a software company based in Guangzhou, China, and SeaTable GmbH, a German firm headquartered in Mainz. Founded in 2020, the project represents the international expansion of Seafile, a Chinese developer originally known for its file synchronization and sharing software. While SeaTable's cloud services and European client operations are managed by the German entity, the platform itself is developed in China by Seafile's engineering team. This cross-border structure, described by TechCrunch as an “unconventional path” for a Chinese startup expanding abroad, reflects Seafile's effort to maintain its product development in China while addressing growing scrutiny in Western markets over data governance and corporate control. In 2021, an innovation project led by the Cyber Innovation Hub at the IT School of the German Armed Forces started to evaluate the possibilities of a large-scale deployment at the German Armed Forces. The evaluation project is currently still ongoing. In 2022, SeaTable is optimizing its database backend to allow millions of records within one base in the future. The focus of development is increasingly on automation and visualization. In 2025, SeaTable introduced AI-powered automations with version 6. The update enabled the integration of large language models (LLMs) for text analysis and automated decision-making. SeaTable operates a self-hosted LLM on servers provided by Hetzner (Germany), while self-hosted deployments can connect to any compatible model. == Features == SeaTable combines the traditional capabilities of a spreadsheet such as Excel and supplements them with a wide range of functions for process automation and visualization as well as a fully comprehensive API. SeaTable is not a pure cloud solution, but can alternatively be installed on a private server and operated completely autonomously. In this way, the owner retains full control over their own data. The installation is done via Docker on a Linux server. == Security and privacy == While most no-code platforms exist only as SaaS solutions, SeaTable describes itself as a data-sparse European solution. While initially the SeaTable Cloud was hosted on Amazon AWS, the move to the German data centers of Swiss provider Exoscale then took place in May 2021. This was followed by the replacement of the Freshdesk cloud ticketing system with a self-hosted Zammad instance, and since April 2022 SeaTable has completely dispensed with all tracking cookies on its website.

  Read more →
• 

  Boundary vector field

  The boundary vector field (BVF) is an external force for parametric active contours (i.e. Snakes). In the fields of computer vision and image processing, parametric active contours are widely used for segmentation and object extraction. The active contours move progressively towards its target based on the external forces. There are a number of shortcomings in using the traditional external forces, including the capture range problem, the concave object extraction problem, and high computational requirements. The BVF is generated by an interpolation scheme which reduces the computational requirement significantly, and at the same time, improves the capture range and concave object extraction capability. The BVF is also tested in moving object tracking and is proven to provide fast detection method for real time video applications.

  Read more →
• 

  GOLOG

  GOLOG is a high-level logic programming language for the specification and execution of complex actions in dynamical domains. It is based on the situation calculus. It is a first-order logical language for reasoning about action and change. GOLOG was developed at the University of Toronto. == History == The concept of situation calculus on which the GOLOG programming language is based was first proposed by John McCarthy in 1963. == Description == A GOLOG interpreter automatically maintains a direct characterization of the dynamic world being modeled, on the basis of user supplied axioms about preconditions, effects of actions and the initial state of the world. This allows the application to reason about the condition of the world and consider the impacts of different potential actions before focusing on a specific action. Golog is a logic programming language and is very different from conventional programming languages. A procedural programming language like C defines the execution of statements in advance. The programmer creates a subroutine which consists of statements, and the computer executes each statement in a linear order. In contrast, fifth-generation programming languages like Golog work with an abstract model with which the interpreter can generate the sequence of actions. The source code defines the problem and it is up to the solver to find the next action. This approach can facilitate the management of complex problems from the domain of robotics. A Golog program defines the state space in which the agent is allowed to operate. A path in the symbolic domain is found with state space search. To speed up the process, Golog programs are realized as hierarchical task networks. Apart from the original Golog language, there are some extensions available. The ConGolog language provides concurrency and interrupts. Other dialects like IndiGolog and Readylog were created for real time applications in which sensor readings are updated on the fly. == Uses == Golog has been used to model the behavior of autonomous agents. In addition to a logic-based action formalism for describing the environment and the effects of basic actions, they enable the construction of complex actions using typical programming language constructs. It is also used for applications in high level control of robots and industrial processes, virtual agents, discrete event simulation etc. It can be also used to develop Belief Desire Intention-style agent systems. == Planning and scripting == In contrast to the Planning Domain Definition Language, Golog supports planning and scripting as well. Planning means that a goal state in the world model is defined, and the solver brings a logical system into this state. Behavior scripting implements reactive procedures, which are running as a computer program. For example, suppose the idea is to authoring a story. The user defines what should be true at the end of the plot. A solver gets started and applies possible actions to the current situation until the goal state is reached. The specification of a goal state and the possible actions are realized in the logical world model. In contrast, a hardwired reactive behavior doesn't need a solver but the action sequence is provided in a scripting language. The Golog interpreter, which is written in Prolog, executes the script and this will bring the story into the goal state.

  Read more →
• 

  Cloud testing

  Cloud testing is a form of software testing in which web applications use cloud computing environments (a "cloud") to simulate real-world user traffic. == Steps == Companies simulate real world Web users by using cloud testing services that are provided by cloud service vendors such as Advaltis, Compuware, HP, Keynote Systems, Neotys, RadView and SOASTA. Once user scenarios are developed and the test is designed, these service providers leverage cloud servers (provided by cloud platform vendors such as Amazon.com, Google, Rackspace, Microsoft, etc.) to generate web traffic that originates from around the world. Once the test is complete, the cloud service providers deliver results and analytics back to corporate IT professionals through real-time dashboards for a complete analysis of how their applications and the internet will perform during peak volumes. == Applications == Cloud testing is often seen as only performance or load tests, however, as discussed earlier it covers many other types of testing. Cloud computing itself is often referred to as the marriage of software as a service (SaaS) and utility computing. In regard to test execution, the software offered as a service may be a transaction generator and the cloud provider's infrastructure software, or may just be the latter. Distributed Systems and Parallel Systems mainly use this approach for testing, because of their inherent complex nature. D-Cloud is an example of such a software testing environment. == Tools == Leading cloud computing service providers include, among others, Amazon, Microsoft, Google, RadView, Skytap, HP and SOASTA. == Benefits == The ability and cost to simulate web traffic for software testing purposes has been an inhibitor to overall web reliability. The low cost and accessibility of the cloud's extremely large computing resources provides the ability to replicate real world usage of these systems by geographically distributed users, executing wide varieties of user scenarios, at scales previously unattainable in traditional testing environments. Minimal start-up time along with quality assurance can be achieved by cloud testing. Following are some of the key benefits: Reduction in capital expenditure Highly scalable

  Read more →
• 

  View model

  A view model or viewpoints framework in systems engineering, software engineering, and enterprise engineering is a framework which defines a coherent set of views to be used in the construction of a system architecture, software architecture, or enterprise architecture. A view is a representation of the whole system from the perspective of a related set of concerns. Since the early 1990s there have been a number of efforts to prescribe approaches for describing and analyzing system architectures. A result of these efforts have been to define a set of views (or viewpoints). They are sometimes referred to as architecture frameworks or enterprise architecture frameworks, but are usually called "view models". Usually a view is a work product that presents specific architecture data for a given system. However, the same term is sometimes used to refer to a view definition, including the particular viewpoint and the corresponding guidance that defines each concrete view. The term view model is related to view definitions. == Overview == The purpose of views and viewpoints is to enable humans to comprehend very complex systems, to organize the elements of the problem and the solution around domains of expertise and to separate concerns. In the engineering of physically intensive systems, viewpoints often correspond to capabilities and responsibilities within the engineering organization. Most complex system specifications are so extensive that no single individual can fully comprehend all aspects of the specifications. Furthermore, we all have different interests in a given system and different reasons for examining the system's specifications. A business executive will ask different questions of a system make-up than would a system implementer. The concept of viewpoints framework, therefore, is to provide separate viewpoints into the specification of a given complex system in order to facilitate communication with the stakeholders. Each viewpoint satisfies an audience with interest in a particular set of aspects of the system. Each viewpoint may use a specific viewpoint language that optimizes the vocabulary and presentation for the audience of that viewpoint. Viewpoint modeling has become an effective approach for dealing with the inherent complexity of large distributed systems. Architecture description practices, as described in IEEE Std 1471-2000, utilize multiple views to address several areas of concerns, each one focusing on a specific aspect of the system. Examples of architecture frameworks using multiple views include Kruchten's "4+1" view model, the Zachman Framework, TOGAF, DoDAF, and RM-ODP. == History == In the 1970s, methods began to appear in software engineering for modeling with multiple views. Douglas T. Ross and K.E. Schoman in 1977 introduce the constructs context, viewpoint, and vantage point to organize the modeling process in systems requirements definition. According to Ross and Schoman, a viewpoint "makes clear what aspects are considered relevant to achieving ... the overall purpose [of the model]" and determines How do we look at [a subject being modelled]? As examples of viewpoints, the paper offers: Technical, Operational and Economic viewpoints. In 1992, Anthony Finkelstein and others published a very important paper on viewpoints. In that work: "A viewpoint can be thought of as a combination of the idea of an “actor”, “knowledge source”, “role” or “agent” in the development process and the idea of a “view” or “perspective” which an actor maintains." An important idea in this paper was to distinguish "a representation style, the scheme and notation by which the viewpoint expresses what it can see" and "a specification, the statements expressed in the viewpoint's style describing particular domains". Subsequent work, such as IEEE 1471, preserved this distinction by utilizing two separate terms: viewpoint and view, respectively. Since the early 1990s there have been a number of efforts to codify approaches for describing and analyzing system architectures. These are often termed architecture frameworks or sometimes viewpoint sets. Many of these have been funded by the United States Department of Defense, but some have sprung from international or national efforts in ISO or the IEEE. Among these, the IEEE Recommended Practice for Architectural Description of Software-Intensive Systems (IEEE Std 1471-2000) established useful definitions of view, viewpoint, stakeholder and concern and guidelines for documenting a system architecture through the use of multiple views by applying viewpoints to address stakeholder concerns. The advantage of multiple views is that hidden requirements and stakeholder disagreements can be discovered more readily. However, studies show that in practice, the added complexity of reconciling multiple views can undermine this advantage. IEEE 1471 (now ISO/IEC/IEEE 42010:2011, Systems and software engineering — Architecture description) prescribes the contents of architecture descriptions and describes their creation and use under a number of scenarios, including precedented and unprecedented design, evolutionary design, and capture of design of existing systems. In all of these scenarios the overall process is the same: identify stakeholders, elicit concerns, identify a set of viewpoints to be used, and then apply these viewpoint specifications to develop the set of views relevant to the system of interest. Rather than define a particular set of viewpoints, the standard provides uniform mechanisms and requirements for architects and organizations to define their own viewpoints. In 1996 the ISO Reference Model for Open Distributed Processing (RM-ODP) was published to provide a useful framework for describing the architecture and design of large-scale distributed systems. == View model topics == === View === A view of a system is a representation of the system from the perspective of a viewpoint. This viewpoint on a system involves a perspective focusing on specific concerns regarding the system, which suppresses details to provide a simplified model having only those elements related to the concerns of the viewpoint. For example, a security viewpoint focuses on security concerns and a security viewpoint model contains those elements that are related to security from a more general model of a system. A view allows a user to examine a portion of a particular interest area. For example, an Information View may present all functions, organizations, technology, etc. that use a particular piece of information, while the Organizational View may present all functions, technology, and information of concern to a particular organization. In the Zachman Framework views comprise a group of work products whose development requires a particular analytical and technical expertise because they focus on either the “what,” “how,” “who,” “where,” “when,” or “why” of the enterprise. For example, Functional View work products answer the question “how is the mission carried out?” They are most easily developed by experts in functional decomposition using process and activity modeling. They show the enterprise from the point of view of functions. They also may show organizational and information components, but only as they relate to functions. === Viewpoints === In systems engineering, a viewpoint is a partitioning or restriction of concerns in a system. Adoption of a viewpoint is usable so that issues in those aspects can be addressed separately. A good selection of viewpoints also partitions the design of the system into specific areas of expertise. Viewpoints provide the conventions, rules, and languages for constructing, presenting and analysing views. In ISO/IEC 42010:2007 (IEEE-Std-1471-2000) a viewpoint is a specification for an individual view. A view is a representation of a whole system from the perspective of a viewpoint. A view may consist of one or more architectural models. Each such architectural model is developed using the methods established by its associated architectural system, as well as for the system as a whole. === Modeling perspectives === Modeling perspectives is a set of different ways to represent pre-selected aspects of a system. Each perspective has a different focus, conceptualization, dedication and visualization of what the model is representing. In information systems, the traditional way to divide modeling perspectives is to distinguish the structural, functional and behavioral/processual perspectives. This together with rule, object, communication and actor and role perspectives is one way of classifying modeling approaches === Viewpoint model === In any given viewpoint, it is possible to make a model of the system that contains only the objects that are visible from that viewpoint, but also captures all of the objects, relationships and constraints that are present in the system and relevant to that viewpoint. Such a model is said to be a viewpoint model, or a view of the

  Read more →