AI Face Generator From Photo Free

AI Face Generator From Photo Free — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Depth peeling

In computer graphics, depth peeling is an exact multipass method of order-independent transparency that extracts transparent fragments into depth layers and composites those layers in depth order. Depth peeling has the advantage of being able to generate correct results even for complex images containing intersecting transparent objects. == Method == Depth peeling works by rendering the image multiple times. Depth peeling uses two Z buffers, one that works conventionally, and one that is not modified, and sets the minimum distance at which a fragment can be drawn without being discarded. For each pass, the previous pass' conventional Z-buffer is used as the minimal Z-buffer, so each pass removes already-captured nearer fragments and draws the next depth layer behind them. The resulting images can then be composited in depth order to form a single image. A major drawback of classical depth peeling is performance: it requires one geometry pass per peeled layer, so scenes with high depth complexity require many passes that each re-rasterize the transparent geometry. Later variants reduce the number of passes by peeling multiple layers or both front and back layers in a pass. Dual depth peeling reduces the geometry-pass count from N to N/2+1 by peeling one layer from the front and one from the back in each pass, while multi-layer depth peeling peels several layers per pass and reported up to an 8x speed-up in RGBA8 settings.
Read more →
Packard Bell Statesman

The Packard Bell Statesman was an economy line of notebook-sized laptops introduced in 1993 by Packard Bell. They were slower in performance and lacked features compared to most competitor products, but they were lower in price. It was created in a collaboration between Packard Bell and Zenith Data Systems. The Statesman series was essentially a rebrand of Zenith Data Systems Z-Star 433 series, with the only notable difference of the logo in the middle and text on the front bezel. == History == In June 1993 Zenith Data Systems announced an alliance with Packard Bell. Zenith acquired about 20% of Packard Bell and they would both now work together to design and build PC's. Zenith would also provide Packard Bell with private-label versions of their portable PC's. The Packard Bell Statesman was a rebrand of the Zenith Z-Star notebook computer series. While the Statesman was being advertised by Packard Bell, the Z-Star series was also still being sold by Zenith. The Statesman was first introduced on October 4, 1993. Prices started at $1,500 for a monochrome or color DSTN model with a 33 MHz Cyrix Cx486SLC, 4 MB of RAM, 200 MB hard disk drive, internal 1.44 MB floppy disk drive, and MS-DOS 6.0 with Windows 3.1 for the included software. A "J mouse" pointing device was included, similar to the TrackPoint. The Statesman was expected to begin shipping within the next few weeks. == Specifications == === Hardware === CPU The first two models, the 200M and 200C, used the Cyrix Cx486SLC. This was Cyrix's first processor, which was a 386SX pin-compatible chip with on-board L1 cache and 486 instructions, being known as a "hybrid chip". The processor was clocked at 33 MHz and had 1 KB of L1 cache. It was a 16-bit processor and was pin compatible with the Intel 80386SX. On the bottom of the unit, the motherboard had an empty socket for a Cyrix FasMath co-processor, which could improve floating-point math performance. The 200M and 200C plus models had a Cyrix Cx486SLC2 clocked at 50 MHz, which was 50% faster than the original 486SLC. The SLC2 similarly had 1 KB of on-board cache and was pin compatible with the previous model. Graphics & Display For video all models used three versions of the Chips & Technologies 655xx, the CT65520, 65525, and 65530. The 65520 was first introduced in early 1992 as the first controller with Super VGA resolution. It supported resolutions up to 1024x768 in 16 colors or shades of gray. If in 800x600 resolution, it can display up to 256 colors. All 3 chips were the same, with the CT65525 identifying as a CT65530. The CT65530 had an ability of 5V and 3.3V mixed operation and linear video memory addressing. All models used a 9.5in 800x600 resolution DSTN LCD. The 200M and 200M Plus had a monochrome display, while the 200C and 200C Plus had a color display. Audio All models had only basic audio available, with just a piezo speaker soldered onto the motherboard and no sound controller. Memory Standard RAM included was 4-8 MB of EDO RAM. The RAM was on a proprietary SIPP package that could only be upgraded to 12 MB maximum if the user had compatible modules. Storage For storage all models used a hard drive with a size of 100 or 200 MB, and all models had an internal 1.44 MB floppy disk drive located on the side of the unit. The maximum capacity hard drive compatible if the user wanted to upgrade was 500 MB.Ports & Expansion For ports all models had 1x serial, 1x parallel, 1x VGA output, and 1x PS/2 keyboard/mouse input. For expansion all models only had one PCMCIA type II slot. Keyboard & Mouse All models used a small-scale keyboard with control keys. One interesting feature of the keyboard is that the J key also acted as a mouse, working similar to IBM's ThinkPad TrackPoint. On some models additional keys such as S, D, F, G and space let you do other mouse actions such as right click, left click, double click, and middle mouse click. === Software === The series shipped with MS-DOS and Windows 3.1 as the included operating system. == Model Comparison == Statesman 200M — The first Statesman model, it came with a DSTN monochrome screen, and a Nickel-cadmium battery pack which could last up to 4 hours. It weighed 7.4 lb and was $1500. Statesman 200C — The second Statesman model, it was the same as the 200M with the only notable differences of a DSTN color display rather than monochrome and a slightly decreased battery life of about 3 hours. It cost $700 more than the 200M at $2200. Statesman 200M/200C Plus — The 200M/200C Plus were both identical to their previous base models, with the only difference of them having a Cx486SLC2 running at 50 MHz. In 1994 it cost around $2,295 for the 200C plus with 4 MB of ram, with 8 MB costing an extra $400. == Reception == The Statesman received fair reception, with most reviewers giving positivity for the low price and high battery life, but mainly criticizing the performance and screen quality of the model line. A review by PC World writer Rex Farrance and Owen Linderholm said the 200M had a good price, being only $1500, and a good battery life which lasted about 4 hours. In benchmarks however, the 200M performed "noticeably below the average". It was noted that the 200M's worst feature was its monochrome display, being "cloudy and a bit dim for our tastes". The J mouse was considered a decent choice, and was said to be "highly usable" after some practice. The 200M was listed as number 3 on PC World's top 20 budget PC list. PC World also reviewed the 200C, saying the color display is only a "marginal, although an improvement on the monochrome version". The 200C placed 9 on the PC World top 20 budget PC list. Compute! Magazine reviewed the 200C Plus in September 1994 stating it "lagged far behind the others, especially the DXs, but then speed isn't everything". It was given pros for low cost and good display, but criticized for its low performance, not having a trackball, and poor external monitor support.
Read more →
Style sheet (web development)

A web style sheet is a form of separation of content and presentation for web design in which the markup (i.e., HTML or XHTML) of a webpage contains the page's semantic content and structure, but does not define its visual layout (style). Instead, the style is defined in an external style sheet file using a style sheet language such as CSS or XSLT. This design approach is identified as a "separation" because it largely supersedes the antecedent methodology in which a page's markup defined both style and structure. The philosophy underlying this methodology is a specific case of separation of concerns. == Benefits == Separation of style and content has advantages, but has only become practical after improvements in popular web browsers' CSS implementations. === Speed === Overall, users experience of a site utilising style sheets will generally be quicker than sites that do not use the technology. ‘Overall’ as the first page will probably load more slowly – because the style sheet AND the content will need to be transferred. Subsequent pages will load faster because no style information will need to be downloaded – the CSS file will already be in the browser’s cache. === Maintainability === Holding all the presentation styles in one file can reduce the maintenance time and reduces the chance of error, thereby improving presentation consistency. For example, the font color associated with a type of text element may be specified — and therefore easily modified — throughout an entire website simply by changing one short string of characters in a single file. The alternative approach, using styles embedded in each individual page, would require a cumbersome, time consuming, and error-prone edit of every file. === Accessibility === Sites that use CSS with either XHTML or HTML are easier to tweak so that they appear similar in different browsers (Chrome, Internet Explorer, Mozilla Firefox, Opera, Safari, etc.). Sites using CSS "degrade gracefully" in browsers unable to display graphical content, such as Lynx, or those so very old that they cannot use CSS. Browsers ignore CSS that they do not understand, such as CSS 3 statements. This enables a wide variety of user agents to be able to access the content of a site even if they cannot render the style sheet or are not designed with graphical capability in mind. For example, a browser using a refreshable braille display for output could disregard layout information entirely, and the user would still have access to all page content. === Customization === If a page's layout information is stored externally, a user can decide to disable the layout information entirely, leaving the site's bare content still in a readable form. Site authors may also offer multiple style sheets, which can be used to completely change the appearance of the site without altering any of its content. Most modern web browsers also allow the user to define their own style sheet, which can include rules that override the author's layout rules. This allows users, for example, to bold every hyperlink on every page they visit. Browser extensions like Stylish and Stylus have been created to facilitate management of such user style sheets. === Consistency === Because the semantic file contains only the meanings an author intends to convey, the styling of the various elements of the document's content is very consistent. For example, headings, emphasized text, lists and mathematical expressions all receive consistently applied style properties from the external style sheet. Authors need not concern themselves with the style properties at the time of composition. These presentational details can be deferred until the moment of presentation. === Portability === The deferment of presentational details until the time of presentation means that a document can be easily re-purposed for an entirely different presentation medium with merely the application of a new style sheet already prepared for the new medium and consistent with elemental or structural vocabulary of the semantic document. A carefully authored document for a web page can easily be printed to a hard-bound volume complete with headers and footers, page numbers and a generated table of contents simply by applying a new style sheet.
Read more →
Digital citizen

The term digital citizen is used with different meanings. According to the definition provided by Karen Mossberger, one of the authors of Digital Citizenship: The Internet, Society, and Participation, digital citizens are "those who use the internet regularly and effectively". In this sense, a digital citizen is a person who uses information technology (IT) to engage in society, politics, and government. More recent elaborations of the concept define digital citizenship as the self-enactment of people’s role in society through the use of digital technologies, stressing the empowering and democratizing characteristics of the citizenship idea. These theories aim at taking into account the ever-increasing datafication of contemporary societies (symbolically linked to the Snowden leaks), which has called into question the meaning of “being (digital) citizens in a datafied society”. This condition is also referred to as the “algorithmic society”, characterised by the increasing datafication of social life and the pervasive presence of surveillance practices – see surveillance and surveillance capitalism, the use of artificial intelligence, and Big Data. Datafication presents crucial challenges for the very notion of citizenship, so that data collection can no longer be seen as an issue of privacy alone so that:We cannot simply assume that being a citizen online already means something (whether it is the ability to participate or the ability to stay safe) and then look for those whose conduct conforms to this meaning Instead, the idea of digital citizenship shall reflect the idea that we are no longer mere “users” of technologies since they shape our agency both as individuals and as citizens. Digital citizenship refers to the responsible and respectful use of technology to engage online, evaluate information, and protect human rights. It encompasses skills for communication, collaboration, empathy, privacy protection, and security to prevent data breaches and identity theft. == Digital citizenship in the "algorithmic society" == In the context of the algorithmic society, the question of digital citizenship "becomes one of the extents to which subjects are able to challenge, avoid or mediate their data double in this datafied society”. These reflections put the emphasis on the idea of the digital space (or cyberspace) as a political space where the respect of fundamental rights of the individual shall be granted (with reference both to the traditional ones as well as to new specific rights of the internet [see “digital constitutionalism”]) and where the agency and the identity of the individuals as citizens is at stake. This idea of digital citizenship is thought to be not only active but also performative, in the sense that “in societies that are increasingly mediated through digital technologies, digital acts become important means through which citizens create, enact and perform their role in society.” In particular, for Isin and Ruppert this points towards an active meaning of (digital) citizenship based on the idea that we constitute ourselves as digital citizen by claiming rights on the internet, either by saying or by doing something. == Types of digital participation == People who characterize themselves as digital citizens often use IT extensively—creating blogs, using social networks, and participating in online journalism. Although digital citizenship begins when any child, teen, or adult signs up for an email address, posts pictures online, uses e-commerce to buy merchandise online, and/or participates in any electronic function that is B2B or B2C, the process of becoming a digital citizen goes beyond simple internet activity. According to Thomas Humphrey Marshall, a British sociologist known for his work on social citizenship, a primary framework of citizenship comprises three different traditions: liberalism, republicanism, and ascriptive hierarchy. Within this framework, the digital citizen needs to exist in order to promote equal economic opportunities and increase political participation. In this way, digital technology helps to lower the barriers to entry for participation as a citizen within a society. They also have a comprehensive understanding of digital citizenship, which is the appropriate and responsible behavior when using technology. Since digital citizenship evaluates the quality of an individual's response to membership in a digital community, it often requires the participation of all community members, both visible and those who are less visible. A large part in being a responsible digital citizen encompasses digital literacy, etiquette, online safety, and an acknowledgement of private versus public information. The development of digital citizen participation can be divided into two main stages. The first stage is through information dissemination, which includes subcategories of its own: static information dissemination, characterized largely by citizens who use read-only websites where they take control of data from credible sources in order to formulate judgments or facts. Many of these websites where credible information may be found are provided by the government. dynamic information dissemination, which is more interactive and involves citizens as well as public servants. Both questions and answers can be communicated, and citizens have the opportunity to engage in question-and-answer dialogues through two-way communication platforms The second stage of digital citizen participation is citizen deliberation, which evaluates what type of participation and role that they play when attempting to ignite some sort of policy change. static citizen participants can play a role by engaging in online polls as well as through complaints and recommendations sent up, mainly toward the government who can create changes in policy decisions. dynamic citizen participants can deliberate amongst others on their thoughts and recommendations in town hall meetings or various media sites. One potential advantage of online participation through digital citizenship is increased social inclusion. In a report on civic engagement, citizen-powered democracy can be initiated either through information shared through the web, direct communication signals made by the state toward the public, and social media tactics from both private and public companies. In fact, it was found that the community-based nature of social media platforms allow individuals to feel more socially included and informed about political issues that peers have also been found to engage with, otherwise known as a "second-order effect." Understanding strategic marketing on social media would further explain social media customers’ participation. Two types of opportunities rise as a result, the first being the ability to lower barriers that can make exchanges much easier. In addition, they have the chance to participate in transformative disruption, giving people who have a historically lower political engagement to mobilize in a much easier and convenient fashion. Nonetheless, there are several challenges that face the presence of digital technologies in political participation. Both current as well as potential challenges can create significant risks for democratic processes. Not only is digital technology still seen as relatively ambiguous, it was also seen to have "less inclusivity in democratic life." Demographic groups differ considerably in the use of technology, and thus, one group could potentially be more represented than another as a result of digital participation. Another primary challenge consists in the ideology of a "filter bubble" effect. Alongside a tremendous spread of false information, internet users could reinforce existing prejudices and assist in polarizing disagreements in the public sphere. This can lead to misinformed voting and decisions based on exposure rather than on pure knowledge. A communication technology director, Van Dijk, stated, "Computerized information campaigns and mass public information systems have to be designed and supported in such a way that they help to narrow the gap between the 'information rich' and 'information poor' otherwise the spontaneous development of ICT will widen it." Access and equivalent amounts of knowledge behind digital technology must be equivalent in order for a fair system to put into place. Alongside a lack of evidenced support for technology that can be proven to be safe for citizens, the OECD has identified five struggles for the online engagement of citizens: Scale: To what extent can a society allow every individual's voice to be heard, but also not be lost in the mass debate? This can be extremely challenging for the government, which may not effectively know how to listen and respond to each individual contribution. Capacity: How can digital technology offer citizens more information on public policy-making? The opportunity for citizens to debate with one another is lacking for acti
Read more →
Image tracing

In computer graphics, image tracing, raster-to-vector conversion or raster vectorization is the conversion of raster graphics into vector graphics. == Background == An image does not have any structure: it is just a collection of marks on paper, grains in film, or pixels in a bitmap. While such an image is useful, it has some limits. If the image is magnified enough, its artifacts appear. The halftone dots, film grains, and pixels become apparent. Images of sharp edges become fuzzy or jagged. See, for example, pixelation. Ideally, a vector image does not have the same problem. Edges and filled areas are represented as mathematical curves or gradients, and they can be magnified arbitrarily (though of course the final image must also be rasterized in to be rendered, and its quality depends on the quality of the rasterization algorithm for the given inputs). The task in vectorization is to convert a two-dimensional image into a two-dimensional vector representation of the image. It is not examining the image and attempting to recognize or extract a three-dimensional model that may be depicted; i.e. it is not a vision system. For most applications, vectorization also does not involve optical character recognition; characters are treated as lines, curves, or filled objects without attaching any significance to them. In vectorization, the shape of the character is preserved, so artistic embellishments remain. Vectorization is the inverse operation corresponding to rasterization, as integration is to differentiation. And, just as with these other operations, while rasterization is fairly straightforward and algorithmic, vectorization involves the reconstruction of lost information and therefore requires heuristic methods. Synthetic images such as maps, cartoons, logos, clip art, and technical drawings are suitable for vectorization. Those images could have been originally made as vector images because they are based on geometric shapes or drawn with simple curves. Continuous tone photographs (such as live portraits) are not good candidates for vectorization. The input to vectorization is an image, but an image may come in many forms such as a photograph, a drawing on paper, or one of several raster file formats. Programs that do raster-to-vector conversion may accept bitmap formats such as TIFF, BMP and PNG. The output is a vector file format. Common vector formats are SVG, DXF, EPS, EMF and AI. Vectorization can be used to update images or recover work. Personal computers often come with a simple paint program that produces a bitmap output file. These programs allow users to make simple illustrations by adding text, drawing outlines, and filling outlines with a specific color. Only the results of these operations (the pixels) are saved in the resulting bitmap; the drawing and filling operations are discarded. Vectorization can be used to recapture some of the information that was lost. Vectorization is also used to recover information that was originally in a vector format but has been lost or has become unavailable. A company may have commissioned a logo from a graphic arts firm. Although the graphics firm used a vector format, the client company may not have received a copy of that format. The company may then acquire a vector format by scanning and vectorizing a paper copy of the logo. == Process == Vectorization starts with an image. === Manual === The image can be vectorized manually. A person could look at the image, make some measurements, and then write the output file by hand. That was the case for the vectorization of a technical illustration about neutrinos. The illustration has a few geometric shapes and a lot of text; it was relatively easy to convert the shapes, and the SVG vector format allows the text (even subscripts and superscripts) to be entered easily. The original image did not have any curves (except for the text), so the conversion is straightforward. Curves make the conversion more complicated. Manual vectorization of complicated shapes can be facilitated by the tracing function built into some vector graphics editing programs. If the image is not yet in machine readable form, then it has to be scanned into a usable file format. Once there is a machine-readable bitmap, the image can be imported into a graphics editing program (such as Adobe Illustrator, CorelDRAW, or Inkscape). Then a person can manually trace the elements of the image using the program's editing features. Curves in the original image can be approximated with lines, arcs, and Bézier curves. An illustration program allows spline knots to be adjusted for a close fit. Manual vectorization is possible, but it can be tedious. Although graphics drawing programs have been around for a long time, artists may find the freehand drawing facilities awkward even when a drawing tablet is used. Instead of using a program, Pepper recommends making an initial sketch on paper. Instead of scanning the sketch and tracing it freehand in the computer, Pepper states: "Those proficient with a graphic tablet and stylus could make the following changes directly in CorelDRAW by using a scan of the sketch as an underlay and drawing over it. I prefer to use pen and ink, and a light table"; most of the final image was traced by hand in ink. Later the line-drawing image was scanned at 600 dpi, cleaned up in a paint program, and then automatically traced with a program. Once the black and white image was in the graphics program, some other elements were added and the figure was colored. Similarly, Ploch recreated a design from a digital photograph. The JPEG was imported and some "basic shapes" were traced by hand and colored in the graphics drawing program; more complex shapes were handled differently. Ploch used a bitmap editor to remove the background and crop the more complex image components. He then printed the image and traced it by hand onto tracing paper to get a clean black and white line drawing. That drawing was scanned and then vectorized with a program. === Automatic === Some programs automate the vectorization process. Example programs are Adobe Illustrator, Inkscape, Corel's PowerTRACE, and Potrace. Some of these programs have a command line interface while others are interactive that allow the user to adjust the conversion settings and view the result. Adobe Streamline is not only an interactive program, but it also allows a user to manually edit the input bitmap and the output curves. Corel's PowerTRACE is accessed through CorelDRAW; CorelDRAW can be used to modify the input bitmap and edit the output curves. Adobe Illustrator has a facility to trace individual curves. Automated programs can have mixed results. A program (PowerTRACE) was used to convert a PNG map to SVG. The program did a good job on the map boundaries (the most tedious task in the tracing) and the settings dropped out all the text (small objects). The text was manually re-inserted. Other conversions may not go as well. The results depend on having high-quality scans, reasonable settings, and good algorithms. Scanned images often have a lot of noise, which can require additional work to clean up. == Options == There are many different image styles and possibilities, and no single vectorization method works well on all images. Consequently, vectorization programs have many options that influence the result. One issue is what the predominant shapes are. If the image is of a fill-in form, then it will probably have just vertical and horizontal lines of a constant width. The program's vectorization should take that into account. On the other hand, a CAD drawing may have lines at any angle, there may be curved lines, and there may be several line weights (thick for objects and thin for dimension lines). Instead of (or in addition to) curves, the image may contain outlines filled with the same color. Adobe Streamline allows users to select a combination of line recognition (horizontal and vertical lines), centerline recognition, or outline recognition. Streamline also allows small outline shapes to be thrown out; the notion is such small shapes are noise. The user may set the noise level between 0 and 1000; an outline that has fewer pixels than that setting is discarded. Another issue is the number of colors in the image. Even images that were created as black on white drawings may end up with many shades of gray. Some line-drawing routines employ anti-aliasing; a pixel completely covered by the line will be black, but a pixel that is only partially covered will be gray. If the original image is on paper and is scanned, there is a similar result: edge pixels will be gray. Sometimes images are compressed (e.g., JPEG images), and the compression will introduce gray levels. Many of the vectorization programs will group same-color pixels into lines, curves, or outlined shapes. If each possible color is grouped into its object, there can be an enormous number of objects. Instead, the user is asked to s
Read more →
Electric Literature

Electric Literature is an American literary magazine. == History == Founded by Andy Hunter and Scott Lindenbaum in 2009 as a print quarterly journal, Electric Literature transitioned to a daily website in 2012 under the helm of Halimah Marcus and Benjamin Samuel. Electric Literature publishes essays, reading lists, interviews, fiction, poetry, graphic narratives, humor, and book news, all available to read online for free without a paywall. It launched the first fiction magazine on the iPhone and iPad. Work published has been recognized by Best American Short Stories, Essays, Poetry, and Comics, the Pushcart Prize, Best Canadian Short Stories, The Best of the Small Presses, and the O. Henry Prize. in 2014, Electric Literature became a registered non-profit. In 2016, Halimah Marcus was appointed the first executive director of Electric Literature. She has been with the magazine since 2010. In 2021, Denne Michele Norris became editor-in-chief of Electric Literature, the first Black and openly trans editor-in-chief of a major U.S. literary publication. In 2022, Electric Literature was the Digital Prize Winner of the Whiting Literary Magazine Prizes. In 2023, Electric Literature partnered with Banned Books USA to offer free banned and challenged books to residents of Florida. In 2025, Electric Literature published their first book, edited by Norris and published by HarperOne: Both/And: Essays by Trans and Gender-Nonconforming Writers of Color. It builds on a prior essay series that Electric Literature sponsored for trans writers of color. Both/And became a finalist for the 2026 Lambda Literary Award for Transgender Nonfiction. == Recommended reading == In May 2012, Electric Literature launched Recommended Reading, a weekly fiction magazine. Each issue is curated by a well known editor or writer. == The Commuter == The Commuter, a weekly magazine for poetry, flash, graphic, or experimental narrative, debuted in January 2018, helmed by writer Kelly Luce.
Read more →
Digital goods

Digital goods or e-goods are intangible goods that exist in digital form. Examples are Wikipedia articles; digital media, such as e-books, downloadable music, internet radio, internet television and streaming media; fonts, logos, photos and graphics; digital subscriptions; online ads (as purchased by the advertiser); internet coupons; electronic tickets; electronically treated documentation in many different fields; downloadable software (Digital Distribution) and mobile apps; cloud-based applications and online games; virtual goods used within the virtual economies of online games and communities; community access; workbooks; worksheets; planners; e-learning (online courses); webinars, video tutorials, blog posts; cards; patterns; website themes and templates. == Legal concerns about digital goods == Special legal concerns regarding digital goods include copyright infringement and taxation. Also the question of the ownership (versus licensed use or service only) of purely digital goods is not finally resolved. For instance, the software installers of the digital software distributor gog.com are technically independent to the account but are still subject to the EULA, where a "licensed, not sold" formulation is used. Therefore, it is not clear if the software can be legally used after a hypothetical loss of the account; a question which was also raised before in practice for the similar service Steam. In July 2012, the European Court of Justice ruled in the case UsedSoft GMbH v. Oracle International Corp. that the sale of a software product, either through a physical support or download, constituted a transfer of ownership in EU law, thus the first sale doctrine applies; the ruling thereby breaks the "licensed, not sold" legal theory, but leaves open numerous questions. Therefore, it is also permissible to resell software licenses even if the digital good has been downloaded directly from the Internet, as the first-sale doctrine applied whenever software was originally sold to a customer for an unlimited amount of time, thus prohibiting any software maker from preventing the resale of their software by any of their legitimate owners. The court requires that the previous owner must no longer be able to use the licensed software after the resale, but finds that the practical difficulties in enforcing this clause should not be an obstacle to authorizing resale, as they are also present for software which can be installed from physical supports, where the first-sale doctrine is in force. In several cases, content providers have faced criticism for revoking access to digital goods due to expired licenses or the discontinuation of a product, such as ebooks (which resulted in a lawsuit against Amazon.com, Inc.), digital video (with Sony Interactive Entertainment revoking access to purchased StudioCanal content from its now-defunct PlayStation video store; a similar move involving Warner Bros. Discovery content was averted by an updated license agreement), and video games (such as Ubisoft discontinuing and revoking access to its game The Crew without providing refunds or the ability to redownload the game) In September 2024, the U.S. state of California implemented a consumer protection law that prohibits the use of terms such as "buy" or "purchase" during transactions involving digital goods if there is no way to obtain the purchases in a manner that cannot be revoked by the seller (such as allowing it to be downloaded for permanent, offline access), and requires a disclaimer to be displayed to the customer at the time of purchase.
Read more →
CSS box model

In web development, the CSS box model refers to how HTML elements are modeled in browser engines and how the dimensions of those HTML elements are derived from CSS properties. It is a fundamental concept for the composition of HTML webpages. The guidelines of the box model are described by web standards World Wide Web Consortium (W3C) specifically the CSS Working Group. For much of the late-1990s and early 2000s there had been non-standard compliant implementations of the box model in mainstream browsers. With the advent of CSS2 in 1998, which introduced the box-sizing property, the problem had mostly been resolved. == Specifics == The Cascading Style Sheets (CSS) specification describes how elements of web pages are displayed by graphical browsers. Section 4 of the CSS1 specification defines a "formatting model" that gives block-level elements—such as p and blockquote—a width and height, and three levels of boxes surrounding it: padding, borders, and margins. While the specification never uses the term "box model" explicitly, the term has become widely used by web developers and web browser vendors. All HTML elements can be considered "boxes", this includes div tag, p tag, or a tag. Each of those boxes has five modifiable dimensions: the height and width describe dimensions of the actual content of the box (text, images, ...) the padding describes the space between this content and the border of the box the border is any kind of line (solid, dotted, dashed...) surrounding the box, if present the margin is the space around the border According to the CSS1 specification, released by W3C in 1996 and revised in 1999, when a width or height is explicitly specified for any block-level element, it should determine only the width or height of the visible element, with the padding, borders, and margins applied afterward. Before CSS3, this box model was known as W3C box model, in CSS3, it is known as the content-box. The total width of a box is therefore margin-left + border-left + padding-left + width + padding-right + border-right + margin-right. Similarly, the total height of a box equals margin-top + border-top + padding-top + height + padding-bottom + border-bottom + margin-bottom. For example, the following CSS code would specify the box dimensions of each block belonging to 'my-class'. Moreover, each such box will have total height 140px and width 240px. CSS3 introduced the Internet Explorer box model to the standard, known referred to as border-box. == History == Before HTML 4 and CSS, very few HTML elements supported both border and padding, so the definition of the width and height of an element was not very contentious. However, it varied depending on the element. The HTML width attribute of a table defined the width of the table including its border. On the other hand, the HTML width attribute of an image defined the width of the image itself (inside any border). The only element to support padding in those early days was the table cell. Width for the cell was defined as "the suggested width for a cell content in pixels excluding the cell padding." In 1996, CSS introduced margin, border and padding for many more elements. It adopted a definition width in relation to content, border, margin and padding similar to that for a table cell. This has since become known as the W3C box model. At the time, very few browser vendors implemented the W3C box model to the letter. The two major browsers at the time, Netscape 4.0 and Internet Explorer 4.0 both defined width and height as the distance from border to border. This has been referred to as the traditional or the Internet Explorer box model. Internet Explorer in "quirks mode" includes the content, padding and borders within a specified width or height; this results in a narrower or shorter rendering of a box than would result following the standard behavior. The Internet Explorer box model behavior was often considered a bug, because of the way in which earlier versions of Internet Explorer handle the box model or sizing of elements in a web page, which differs from the standard way recommended by the W3C for the Cascading Style Sheets language. As of Internet Explorer 6, the browser supports an alternative rendering mode (called the "standards-compliant mode") which solves this discrepancy. However, for backward compatibility reasons, all versions still behave in the usual, non-standard way by default (see quirks mode). Internet Explorer for Mac is not affected by this non-standard behavior. === Workarounds === Internet Explorer versions 6 and onward are not affected by the bug if the page contains certain HTML document type declarations. These versions maintain the buggy behavior when in quirks mode for reasons of backward compatibility. For example, quirks mode is triggered: When the document type declaration is absent or incomplete; When an HTML 3 or earlier document is encountered; When an HTML 4.0 Transitional or Frameset document type declaration is used and a system identifier (URI) is not present; When an SGML comment or other unrecognized content appears before the document type declaration Internet Explorer 6 also uses quirks mode if there is an XML declaration prior to the document type declaration. Various workarounds have been devised to force Internet Explorer versions 5 and earlier to display Web pages using the W3C box model. These workarounds generally exploit unrelated bugs in Internet Explorer's CSS selector processing in order to hide certain rules from the browser. The best known of these workarounds is the "box model hack" developed by Tantek Çelik, a former Microsoft employee who developed this idea while working on Internet Explorer for the Macintosh. It involves specifying a width declaration for Internet Explorer for Windows, and then overriding it with another width declaration for CSS-compliant browsers. This second declaration is hidden from Internet Explorer for Windows by exploiting other bugs in the way that it parses CSS rules. The implementation of these CSS “hacks” has been further complicated by the public release of Internet Explorer 7, which has had some issues fixed, but not others, causing undesired results in pages using these hacks. Box model hacks have proven unreliable because they rely on bugs in browsers' CSS support that may be fixed in later versions. For this reason, some Web developers have instead recommended either avoiding specifying both width and padding for the same element or using conditional comment and/or CSS filters to work around the box model bug in older versions of Internet Explorer. == Support for Internet Explorer's box model == Web designer Doug Bowman has said that the original Internet Explorer box model represents a better, more logical approach. Peter-Paul Koch gives the example of a physical box, whose dimensions always refer to the box itself, including potential padding, but never its content. He says that this box model is more useful for graphic designers, who create designs based on the visible width of boxes rather than the width of their content. Bernie Zimmermann says that the Internet Explorer box model is closer to the definition of cell dimensions and padding used in the HTML table model. The W3C has included a "box-sizing" property in CSS3. When box-sizing: border-box; is specified for an element, any padding or border of the element is drawn inside the specified width and height, "as commonly implemented by legacy HTML user agents". Internet Explorer 8, WebKit browsers such as Apple Safari 5.1+ and Google Chrome, Gecko-based browsers such as Mozilla Firefox 29.0 and later, Opera 7.0 and later, and Konqueror 3.3.2 and later support the CSS3 box-sizing property. Gecko browsers previous than 29.0 support the same functionality using the browser-specific -moz-box-sizing property. border-box is the default box model used in Bootstrap framework.
Read more →
AsoSoft text corpus

The AsoSoft text corpus is the first large-scale Kurdish text corpus, collected and processed by the AsoSoft research and development group. It contains 458,000 documents (188 million tokens) that are collected from sources such as websites, news agencies, books, and magazines. The corpus is partially tagged by topic, so it can be used for topic identification tasks. Also, it is applicable for extracting language model and computational lexicon information. Part of the corpus (75 million tokens) is available online for non-commercial use. The corpus uses the TEI format.
Read more →
LTE Advanced

LTE Advanced, also named or recognized as LTE+, LTE-A or 4G+, is a 4G mobile cellular communication standard developed by 3GPP as a major enhancement of the Long Term Evolution (LTE) standard. Three technologies from the LTE-Advanced tool-kit – carrier aggregation, 4x4 MIMO and 256QAM modulation in the downlink – if used together and with sufficient aggregated bandwidth, can deliver maximum peak downlink speeds approaching, or even exceeding, 1 Gbit/s. This is significantly more than the peak 300 Mbit/s rate offered by the preceding LTE standard. Later developments have resulted in LTE Advanced Pro (or 4.9G) which increases bandwidth even further. The first ever LTE Advanced network was deployed in 2013 by SK Telecom in South Korea. In August 2019, the Global mobile Suppliers Association (GSA) reported that there were 304 commercially launched LTE-Advanced networks in 134 countries. Overall, 335 operators are investing in LTE-Advanced (in the form of tests, trials, deployments or commercial service provision) in 141 countries. == Name == LTE Advanced is also named (indicated as) LTE+, LTE-A, or (on Samsung Galaxy and Xiaomi smartphones) as 4G+. Such networks have also often been described as ‘Gigabit LTE networks’ mirroring a term that is also used in the fixed broadband industry. == History == The mobile communication industry and standards organizations have therefore started work on 4G access technologies, such as LTE Advanced. At a workshop in April 2008 in China, 3GPP agreed the plans for work on Long Term Evolution (LTE). A first set of specifications were approved in June 2008. Besides the peak data rate 1 Gb/s as defined by the ITU-R, it also targets faster switching between power states and improved performance at the cell edge. Detailed proposals are being studied within the working groups. The LTE+ format was first proposed by NTT DoCoMo of Japan and has been adopted as the international standard. It was formally submitted as a candidate 4G to ITU-T in late 2009 as meeting the requirements of the IMT-Advanced standard, and was standardized by the 3rd Generation Partnership Project (3GPP) in March 2011 as 3GPP Release 10. The work by 3GPP to define a 4G candidate radio interface technology started in Release 9 with the study phase for LTE-Advanced. Being described as a 3.9G (beyond 3G but pre-4G), the first release of LTE did not meet the requirements for 4G (also called IMT Advanced as defined by the International Telecommunication Union) such as peak data rates up to 1 Gb/s. The ITU has invited the submission of candidate Radio Interface Technologies (RITs) following their requirements in a circular letter, 3GPP Technical Report (TR) 36.913, "Requirements for Further Advancements for E-UTRA (LTE-Advanced)." These are based on ITU's requirements for 4G and on operators’ own requirements for advanced LTE. Major technical considerations include the following: Continual improvement to the LTE radio technology and architecture Scenarios and performance requirements for working with legacy radio technologies Backward compatibility of LTE-Advanced with LTE. An LTE terminal should be able to work in an LTE-Advanced network and vice versa. Any exceptions will be considered by 3GPP. Consideration of recent World Radiocommunication Conference (WRC-07) decisions regarding frequency bands to ensure that LTE-Advanced accommodates the geographically available spectrum for channels above 20 MHz. Also, specifications must recognize those parts of the world in which wideband channels are not available. Likewise, 'WiMAX 2', 802.16m, has been approved by ITU as the IMT Advanced family. WiMAX 2 is designed to be backward compatible with WiMAX 1 devices. Most vendors now support conversion of 'pre-4G', pre-advanced versions and some support software upgrades of base station equipment from 3G. == Proposals == The target of 3GPP LTE Advanced is to reach and surpass the ITU requirements. LTE Advanced should be compatible with first release LTE equipment, and should share frequency bands with first release LTE. In the feasibility study for LTE Advanced, 3GPP determined that LTE Advanced would meet the ITU-R requirements for 4G. The results of the study are published in 3GPP Technical Report (TR) 36.912. One of the important LTE Advanced benefits is the ability to take advantage of advanced topology networks; optimized heterogeneous networks with a mix of macrocells with low power nodes such as picocells, femtocells and new relay nodes. The next significant performance leap in wireless networks will come from making the most of topology, and brings the network closer to the user by adding many of these low power nodes – LTE Advanced further improves the capacity and coverage, and ensures user fairness. LTE Advanced also introduces multicarrier to be able to use ultra wide bandwidth, up to 100 MHz of spectrum supporting very high data rates. In the research phase many proposals have been studied as candidates for LTE Advanced (LTE-A) technologies. The proposals could roughly be categorized into: Support for relay node base stations Coordinated multipoint (CoMP) transmission and reception UE Dual TX antenna solutions for SU-MIMO and diversity MIMO, commonly referred to as 2x2 MIMO Scalable system bandwidth exceeding 20 MHz, up to 100 MHz Carrier aggregation of contiguous and non-contiguous spectrum allocations Local area optimization of air interface Nomadic / Local Area network and mobility solutions Flexible spectrum usage Cognitive radio Automatic and autonomous network configuration and operation Support of autonomous network and device test, measurement tied to network management and optimization Enhanced precoding and forward error correction Interference management and suppression Asymmetric bandwidth assignment for FDD Hybrid OFDMA and SC-FDMA in uplink UL/DL inter eNB coordinated MIMO SONs, Self Organizing Networks methodologies Within the range of system development, LTE-Advanced and WiMAX 2 can use up to 8x8 MIMO and 128-QAM in downlink direction. Example performance: 100 MHz aggregated bandwidth, LTE-Advanced provides almost 3.3 Gbit peak download rates per sector of the base station under ideal conditions. Advanced network architectures combined with distributed and collaborative smart antenna technologies provide several years road map of commercial enhancements. The 3GPP standards Release 12 added support for 256-QAM. A summary of a study carried out in 3GPP can be found in TR36.912. == Timeframe and introduction of additional features == Original standardization work for LTE-Advanced was done as part of 3GPP Release 10, which was frozen in April 2011. Trials were based on pre-release equipment. Major vendors support software upgrades to later versions and ongoing improvements. In order to improve the quality of service for users in hotspots and on cell edges, heterogeneous networks (HetNets) are formed of a mixture of macro-, pico- and femto base stations serving corresponding-size areas. Frozen in December 2012, 3GPP Release 11 concentrates on better support of HetNet. Coordinated Multi-Point operation (CoMP) is a key feature of Release 11 in order to support such network structures. Whereas users located at a cell edge in homogenous networks suffer from decreasing signal strength compounded by neighbor cell interference, CoMP is designed to enable use of a neighboring cell to also transmit the same signal as the serving cell, enhancing quality of service on the perimeter of a serving cell. In-device Co-existence (IDC) is another topic addressed in Release 11. IDC features are designed to ameliorate disturbances within the user equipment caused between LTE/LTE-A and the various other radio subsystems such as WiFi, Bluetooth, and the GPS receiver. Further enhancements for MIMO such as 4x4 configuration for the uplink were standardized. The higher number of cells in HetNet results in user equipment changing the serving cell more frequently when in motion. The ongoing work on LTE-Advanced in Release 12, amongst other areas, concentrates on addressing issues that come about when users move through HetNet, such as frequent hand-overs between cells. It also included use of 256-QAM. == First technology demonstrations and field trials == This list covers technology demonstrations and field trials up to the year 2014, paving the way for a wider commercial deployment of the VoLTE technology worldwide. From 2014 onwards various further operators trialled and demonstrated the technology for future deployment on their respective networks. These are not covered here. Instead a coverage of commercial deployments can be found in the section below. == LTE Advanced Pro == LTE Advanced Pro (LTE-A Pro, also known as 4.5G, 4.5G Pro, 4.9G, Pre-5G, 5G Project) is a name for 3GPP release 13 and 14. It is an evolution of LTE Advanced (LTE-A) cellular standard supporting data rates in excess of 3 Gbit/s using 32-carrier aggregation. It also introduces th
Read more →
Computer aided transceiver

Computer aided transceiver (CAT) is a non-generic serial protocol used by radio amateurs for (remotely) controlling a transceiver radio receiver equipment using a computer. Conventional transmitters are manually controlled and used to transmit voice using buttons, dials, etc. However, advances in electronics have come to market devices that can be controlled by a computer and allow digital modes such as packet radio and also the use of satellite tracking, because it can continuously change the device's frequency according to the Doppler effect. This is done by connecting a Radio receiver and a PC using a CAT interface and a CAT Program Additionally, CAT interfaces can also be used to position tracking antennas, in controllers. As a satellite moves overhead. A CAT interface is a piece of hardware that connects the PC and radio that provides a connection to allows the radio and the PC to communicate with each other. The CAT interface provides the signals to and fro via correct voltage levels and in the case of a Universal Serial Bus (USB) CAT interface it requires a "protocol" for communication but communication itself is down to the radio and the software on the PC. Software that may be called a CAT program allows a radio to be controlled through the PC. Changes made on the radio through user interactions on the CAT Program are (generally) shown on the PC's screen. The functionality of CAT equipment (software & interface) depends on the radio and what features the software writers included in the CAT software. Modern radio systems do have more CAT functionality If you run a logging program that supports CAT, then that software may take advantage of the CAT system by retrieving information from the radio to help fill in log details, such as the frequency that the contact was made. CAT is also useful on many radios where there are many sub-menus in the radios menu system, and many of the sub-menu items can be easily changed via the PC. On many HF radios, the CAT system is also used to program the memories on the radio, but you would need to use appropriate programming software. A CAT interface does not receive or transmit any DATA mode, that is the purpose of a DATA interface. Although, both may be used at the same time with the correct CAT Equipment. DATA modes, and getting audio to and from the PC is the function of a DATA interface. A completely different thing but it is easier and more useful when CAT and DATA are used at the same time. Wouldn't it be nice to have an interface that could operate Frequency-shift keying (FSK), Audio FSK (AFSK), (real) Morse Code (CW), with a CAT interface and its own sound card..... (eg. The DigiMaster Pro3).
Read more →
COVFEFE Act

The Communications Over Various Feeds Electronically for Engagement Act (COVFEFE Act), House Bill H.R. 2884, was introduced in the United States House of Representatives on June 12, 2017, during the 115th United States Congress. The bill was intended to amend the Presidential Records Act to preserve Twitter posts and other social media interactions of the President of the United States and require the National Archives to store such items. H.R. 2884 was assigned to the House Oversight and Reform Committee for consideration. While in committee, there were no roll call votes related to the bill. The bill died in committee. U.S. Representative Mike Quigley, Democrat of Illinois, introduced the legislation due to Donald Trump's routine use of Twitter, stating "In order to maintain public trust in government, elected officials must answer for what they do and say; this includes 140-character tweets. If the president is going to take to social media to make sudden public policy proclamations, we must ensure that these statements are documented and preserved for future reference". If enacted, the bill "would bar the prolifically tweeting president from deleting his posts, as he has sometimes done". The COVFEFE Act would have also treated a president's personal social media accounts (e.g., Trump's "@realDonaldTrump" Twitter account) the same as official social media accounts (e.g., the "@POTUS" Twitter account). == Background == The bill title refers to "covfefe", a word in a May 31, 2017 tweet that Trump sent at 12:06 AM EDT, reading "Despite the constant negative press covfefe". This incomplete tweet was liked and retweeted hundreds of thousands of times, making it one of the most popular tweets of 2017, as people speculated on its meaning. The tweet was deleted at 5:48 AM EDT. At 6:09 AM EDT, Trump's account tweeted "Who can figure out the true meaning of 'covfefe' ??? Enjoy!" During the May 31 White House press briefing, Hunter Walker of Yahoo! News asked White House press secretary Sean Spicer about the tweet and if there was any concern about the president sending out incoherent tweets that stay up for hours. Spicer responded, "I think the president and a small group of people know exactly what he meant" and offered no other explanation. This unexpected response spawned additional media attention and criticism for its cryptic meaning, with commentators unsure whether or not Spicer was joking. Callum Borchers of The Washington Post's The Fix noted that the Trump administration deliberately responded in a way that encouraged the media and the public to focus on covfefe instead of other controversies like the Russia investigation, resignation of White House communications director Michael Dubke, or U.S.-Germany relations. == Legal significance of Trump's tweeting == Trump's tweets have been legally significant in the past. White House Press Secretary Sean Spicer stated that Trump's tweets are "considered official statements by the President of the United States". Some of his tweets have contradicted his agenda by undercutting or contradicting statements of public officials as well as the arguments of U.S. Department of Justice attorneys seeking to defend Trump's decisions in court. A federal appellate court cited one of Trump's tweets in upholding a lower court's order blocking Trump's Executive Order 13780 from going into effect in 2017. Courts have been clear that Twitter statements can be used as evidence of intent. Before Trump's "@realDonaldTrump" Twitter account was suspended, he blocked a number of users, preventing them from viewing his tweets or posting public replies. A group associated with Columbia University filed a lawsuit on behalf of blocked users, called Knight First Amendment Institute v. Trump. Plaintiffs successfully argued that @realDonaldTrump reply threads constituted a "designated public forum" akin to a public meeting, and therefore blocking users based on their political viewpoints violated their constitutional right to freedom of speech. The Second Circuit upheld this ruling on July 9, 2019. Regardless of the failure of the bill, Trump's tweets have been archived in accordance with the Presidential and Federal Records Act Amendments of 2014.
Read more →
CamScanner

CamScanner is a Chinese mobile app first released in 2010 that allows iOS and Android devices to be used as image scanners. It allows users to 'scan' documents (by taking a photo with the device's camera) and share the photo as either a JPEG or PDF. This app is available free of charge on the Google Play Store and the Apple App Store. The app is based on freemium model, with ad-supported free version and a premium version with additional functions. == History == On August 27, 2019, Russian cyber security company Kaspersky Lab discovered that recent versions of the Android app distributed an advertising library containing a Trojan Dropper, which was also included in some apps preinstalled on several Chinese mobiles. The advertising library decrypts a Zip archive which subsequently downloads additional files from servers controlled by hackers, allowing the hackers to control the device, including by showing intrusive advertising or charging paid subscriptions. Google took the app down after Kaspersky reported its findings. An updated version of the app with the advertising library removed was made available on the Google Play Store as of September 5, 2019. Kaspersky later acknowledged "We appreciate the willingness to cooperate that we've seen from CamScanner representatives, as well as the responsible attitude to user safety they demonstrated while eliminating the threat…The malicious modules were removed from the app immediately upon Kaspersky's warning, and Google Play has restored the app." In June 2020, as tensions along the Line of Actual Control between China and India continued, the Government of India decided to ban 118 Chinese apps, including TikTok and CamScanner citing data and privacy issues. On January 5, 2021, US President Donald Trump signed Executive Order 13971 banning Alipay, Tencent's QQ, QQ Wallet, WeChat Pay, CamScanner, Shareit, VMate and WPS Office to conduct US transactions. The Trump administration explained this act by saying that this move helps prevent personal information such as text, phone calls and photos collected from rivals. However, the Biden administration did not meet the February 2021 deadline for implementing the executive order, allowing these apps to operate in the US and revoked the previous executive order Executive Order 14034 of June 9, 2021.
Read more →
Dynamic web page

A dynamic web page is a web page constructed at runtime (during software execution), as opposed to a static web page, delivered as it is stored. A server-side dynamic web page is a web page whose construction is controlled by an application server processing server-side scripts. In server-side scripting, parameters determine how the assembly of every new web page proceeds, and including the setting up of more client-side processing. A client-side dynamic web page processes the web page using JavaScript running in the browser as it loads. JavaScript can interact with the page via Document Object Model (DOM), to query page state and modify it. Even though a web page can be dynamic on the client-side, it can still be hosted on a static hosting service such as GitHub Pages or Amazon S3 as long as there is not any server-side code included. A dynamic web page is then reloaded by the user or by a computer program to change some variable content. The updating information could come from the server, or from changes made to that page's DOM. This may or may not truncate the browsing history or create a saved version to go back to, but a dynamic web page update using AJAX technologies will neither create a page to go back to, nor truncate the web browsing history forward of the displayed page. Using AJAX, the end user gets one dynamic page managed as a single page in the web browser while the actual web content rendered on that page can vary. The AJAX engine sits only on the browser requesting parts of its DOM, the DOM, for its client, from an application server. A particular application server could offer a standardized REST style interface to offer services to the web application. DHTML is the umbrella term for technologies and methods used to create web pages that are not static web pages, though it has fallen out of common use since the popularization of AJAX, a term which is now itself rarely used. Client-side-scripting, server-side scripting, or a combination of these make for the dynamic web experience in a browser. == Basic concepts == Classical hypertext navigation, with HTML or XHTML alone, provides "static" content, meaning that the user requests a web page and simply views the page and the information on that page. However, a web page can also provide a "live", "dynamic", or "interactive" user experience. Content (text, images, form fields, etc.) on a web page can change, in response to different contexts or conditions. There are two ways to create this kind of effect: Using client-side scripting to change interface behaviors within a specific web page, in response to mouse or keyboard actions, data received from a web API, websocket or at specified timing events. In this case the dynamic behavior occurs within the presentation. Using server-side scripting to change the supplied page source code between pages, adjusting the sequence or reload of the web pages or web content supplied to the browser. Server responses may be determined by such conditions as data in a posted HTML form, parameters in the URL, the type of browser being used, the passage of time, or a database or server state. Web pages that use client-side scripting must use presentation technology broadly called rich interfaced pages. Client-side scripting languages like JavaScript or ActionScript, used for Dynamic HTML (DHTML) and Flash technologies respectively, are frequently used to orchestrate media types (sound, animations, changing text, etc.) of the presentation. The scripting also allows use of remote scripting, a technique by which the DHTML page requests additional information from a server, using a hidden Frame, XMLHttpRequests, or a web service. It is also possible to use a web framework to create a web API, which the client, via the use of JavaScript, uses to obtain data and alter its appearance or behavior dynamically depending on the data. Web pages that use server-side scripting are often created with the help of server-side languages such as PHP, Perl, ASP, JSP, ColdFusion and other languages. These server-side languages typically use the Common Gateway Interface (CGI) to produce dynamic web pages. These kinds of pages can also use, on the client-side, the first kind (DHTML, etc.). == History == It is difficult to be precise about "dynamic web page beginnings" or chronology because the precise concept makes sense only after the "widespread development of web pages". HTTP has existed since 1989, HTML, publicly standardized since 1996. The web browser's rise in popularity started with Mosaic in 1993. Between 1995 and 1996, multiple dynamic web products were introduced to the market, including Coldfusion, WebObjects, PHP, and Active Server Pages. The introduction of JavaScript (then known as LiveScript) enabled the production of client-side dynamic web pages, with JavaScript code executed in the client's browser. The letter "J" in the term AJAX originally indicated the use of JavaScript, as well as XML. With the rise of server side JavaScript processing, for example, Node.js, originally developed in 2009, JavaScript is also used to dynamically create pages on the server that are sent fully formed to clients. MediaWiki, the content management system that powers Wikipedia, is an example for an originally server-side dynamic web page, interacted with through form submissions and URL parameters. Throughout time, progressively enhancing extensions such as the visual editor have also added elements that are dynamic on the client side, while the original dynamic server-side elements such as the classic edit form remain available to be fallen back on (graceful degradation) in case of error or incompatibility. == Server-side scripting == A program running on a web server is used to generate the web content on various web pages, manage user sessions, and control workflow. Server responses may be determined by such conditions as data in a posted HTML form, parameters in the URL, the type of browser being used, the passage of time, or a database or server state. Such web pages are often created with the help of server-side languages such as ASP, ColdFusion, Java, JavaScript, Perl, PHP, Ruby, Python, and other languages, by a support server that can run on the same hardware as the web server. These server-side languages often use the Common Gateway Interface (CGI) to produce dynamic web pages. Two notable exceptions are ASP.NET, and JSP, which reuse CGI concepts in their APIs but actually dispatch all web requests into a shared virtual machine. The server-side languages are used to embed tags or markers within the source file of the web page on the web server. When a user on a client computer requests that web page, the web server interprets these tags or markers to perform actions on the server. For example, the server may be instructed to insert information from a database or information such as the current date. Dynamic web pages are often cached when there are few or no changes expected and the page is anticipated to receive considerable amount of web traffic that would wastefully strain the server and slow down page loading if it had to generate the pages on the fly for each request. == Client-side scripting == Client-side scripting is changing interface behaviors within a specific web page in response to input device actions, or at specified timing events. In this case, the dynamic behavior occurs within the presentation. The client-side content is generated on the user's local computer system. Such web pages use presentation technology called rich interfaced pages. Client-side scripting languages like JavaScript or ActionScript, used for Dynamic HTML (DHTML) and Flash technologies respectively, are frequently used to orchestrate media types (sound, animations, changing text, etc.) of the presentation. Client-side scripting also allows the use of remote scripting, a technique by which the DHTML page requests additional information from a server, using a hidden frame, XMLHttpRequests, or a Web service. The first public use of JavaScript was in 1995, when the language was implemented in Netscape Navigator 2, standardized as ECMAScript two years later. Example The client-side content is generated on the client's computer. The web browser retrieves a page from the server, then processes the code embedded in the page (typically written in JavaScript) and displays the retrieved page's content to the user. The innerHTML property (or write command) can illustrate the client-side dynamic page generation: two distinct pages, A and B, can be regenerated (by an "event response dynamic") as document.innerHTML = A and document.innerHTML = B; or "on load dynamic" by document.write(A) and document.write(B). == Combination technologies == All of the client and server components that collectively build a dynamic web page are called a web application. Web applications manage user interactions, state, security, and performance. Ajax uses a combination of both client-side script
Read more →
Europa-Lehrmittel

The Verlag Europa-Lehrmittel Nourney, Vollmer GmbH & Co. KG (English: European educational media), based in Haan (district Gruiten) near Düsseldorf, Germany, develops educational media for vocational training and further education as used in vocational schools, universities, companies and further education institutions for industrial-technical, business, social, health as well as gastronomic professions. The contents are delivered in print as well as in digital formats, including offered as apps, simulations, software and through an exam preparation portal. The publisher has its own digital learning platform, the Europathek. General partner is Nourney, Vollmer & Co. GmbH, a school and specialist book publisher. == History == The publishing house was founded in Wuppertal in 1948, when the first books were published. In Eislingen/Fils a construction office was set up to create the technical drawings for the textbooks - today the drawing office of the publisher in Ostfildern. A little over 40 years later, in 1989, a new company building was built in Haan-Gruiten. In 1997, Europa-Lehrmittel acquired the Fachbuchverlag Pfanneberg with its program aimed at gastronomic professions. Further program expansions in vocational training were realized by adding titles of the publishing houses Lau, Gerber, Pluspunkt, parts of the Verlag Handwerk und Technik program and that of the Gildebuchverlag. In 2013, the scientific and technical university titles of Verlag Harri Deutsch were taken over, including the bestselling "Handbook of Mathematics" by Ilya Nikolaevich Bronstein and Konstantin Adolfovic Semendyayev. In addition, Europa-Lehrmittel's first exam apps appeared. In 2017, the publisher introduced its own digital learning platform named Europathek. The Prüfungsdoc (English: Examination Doc) platform, which enables targeted online preparation for exams, went online the same year. In 2018, the titles of the Düsseldorf publishing house SOL for self-organized learning were incorporated into Europa-Lehrmittel's program. == Program == The program meanwhile includes well over 2000 print and digital publications, including specialist titles on metal technology, automotive and electrical engineering (like "Tabellenbuch Metall" (English: Metal Book of Tables)), on business administration, as well as works for the gastronomic profession (e.g. "Der junge Koch" (English: The Young Cook)). Many titles also appear as licensed editions in over 20 different languages on all continents. All contents are presented in an annual catalog, on the website, in schools, in companies, and at trade fairs and congresses. The publisher is a member of the Deutscher Hauswirtschaftsrat. == Digital educational media == Europathek: In addition to digital books, Europathek also provides media packages, additional materials and e-learning contents. The online contents of the 'media shelf' can be used per web browser. There are also software versions and apps for offline use, with the help of which the obtained titles can be viewed after downloading. Prüfungsdoc (English: Examination Doc): Prüfungsdoc offers web-based learning, practice and repetition to prepare for the intermediate and final examinations. This includes simulations of the exams with direct evaluation of the results.
Read more →