AI Face Swap App

AI Face Swap App — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Closest point method

The closest point method (CPM) is an embedding method for solving partial differential equations on surfaces. The closest point method uses standard numerical approaches such as finite differences, finite element or spectral methods in order to solve the embedding partial differential equation (PDE) which is equal to the original PDE on the surface. The solution is computed in a band surrounding the surface in order to be computationally efficient. In order to extend the data off the surface, the closest point method uses a closest point representation. This representation extends function values to be constant along directions normal to the surface. == Definitions == Closest Point function: Given a surface S , c p ( x ) {\displaystyle {\mathcal {S}},cp(\mathbf {x} )} refers to a (possibly non-unique) point belonging to S {\displaystyle {\mathcal {S}}} , which is closest to x {\displaystyle \mathbf {x} } [SE]. Closest point extension: Let S {\displaystyle {\mathcal {S}}} , be a smooth surface in R d {\displaystyle \mathbb {R} ^{d}} . The closest point extension of a function u : S → R {\displaystyle u:{\mathcal {S}}\rightarrow \mathbb {R} } , to a neighborhood Ω {\displaystyle \Omega } of S {\displaystyle {\mathcal {S}}} , is the function v : Ω → R {\displaystyle v:\Omega \rightarrow \mathbb {R} } , defined by v ( x ) = u ( c p ( x ) ) {\displaystyle v(\mathbf {x} )=u(cp(\mathbf {x} ))} . == Closest point method == Initialization consists of these steps [EW]: If it is not already given, a closest point representation of the surface is constructed. A computational domain is chosen. Typically this is a band around the surface. Replace surface gradients by standard gradients in R 3 {\displaystyle \mathbb {R} ^{3}} . Solution is initialized by extending the initial surface data on to the computational domain using the closest point function. After initialization, alternate between the following two steps: Using the closest point function, extend the solution off the surface to the computational domain. Compute the solution to the embedding PDE on a Cartesian mesh in the computational domain for one time step. == Banding == The surface PDE is extended into R 3 {\displaystyle \mathbb {R} ^{3}} however it is only necessary to solve this new PDE near the surface. Hence, we solve the PDE in a band surrounding the surface for efficient computational purposes. Ω c x : ‖ x − c p ( x ) ‖ 2 ≤ λ {\displaystyle \Omega _{c}{x:\|x-cp(x)\|_{2}\leq \lambda }} where λ {\displaystyle \lambda } is the bandwidth. == Example: Heat equation on a circle == Using initial profile u S ( θ , t ) = sin ⁡ ( θ ) {\displaystyle u_{S}(\theta ,t)=\sin(\theta )} leads to the solution u S ( θ , t ) = exp ⁡ ( − t ) sin ⁡ ( θ ) {\displaystyle u_{S}(\theta ,t)=\exp(-t)\sin(\theta )} for the heat equation. Forward Euler time-stepping is used with relation Δ t = 0.1 Δ x 2 {\displaystyle \Delta t=0.1\Delta x^{2}} and degree-four interpolation polynomials for the interpolations. Second-order centered differences are used for the spatial discretization. The CPM results in the expected second order error in the solution u {\displaystyle u} . == Applications == The closest point method can be applied to various PDEs on surfaces. Reaction–diffusion problems on point clouds [RD], eigenvalue problems [EV], and level set equations [LS] are a few examples.
Read more →
Autonomic computing

Autonomic computing (AC) is distributed computing resources with self-managing characteristics, adapting to unpredictable changes while hiding intrinsic complexity to operators and users. Initiated by IBM in 2001, this initiative ultimately aimed to develop computer systems capable of self-management, to overcome the rapidly growing complexity of computing systems management, and to reduce the barrier that complexity poses to further growth. == Description == The AC system concept is designed to make adaptive decisions, using high-level policies. It will constantly check and optimize its status and automatically adapt itself to changing conditions. An autonomic computing framework is composed of autonomic components (AC) interacting with each other. An AC can be modeled in terms of two main control schemes (local and global) with sensors (for self-monitoring), effectors (for self-adjustment), knowledge and planner/adapter for exploiting policies based on self- and environment awareness. This architecture is sometimes referred to as Monitor-Analyze-Plan-Execute (MAPE). Driven by such vision, a variety of architectural frameworks based on "self-regulating" autonomic components has been recently proposed. A similar trend has recently characterized significant research in the area of multi-agent systems. However, most of these approaches are typically conceived with centralized or cluster-based server architectures in mind and mostly address the need of reducing management costs rather than the need of enabling complex software systems or providing innovative services. Some autonomic systems involve mobile agents interacting via loosely coupled communication mechanisms. Autonomy-oriented computation is a paradigm proposed by Jiming Liu in 2001 that uses artificial systems imitating social animals' collective behaviours to solve difficult computational problems. For example, ant colony optimization could be studied in this paradigm. == Problem of growing complexity == Forecasts suggested that the computing devices in use would grow at 38% per year and the average complexity of each device was increasing. This volume and complexity was managed by highly skilled humans; but the demand for skilled IT personnel was already outstripping supply, with labour costs exceeding equipment costs by a ratio of up to 18:1. Computing systems have brought great benefits of speed and automation but there is now an overwhelming economic need to automate their maintenance. In a 2003 IEEE Computer article, Kephart and Chess warn that the dream of interconnectivity of computing systems and devices could become the "nightmare of pervasive computing" in which architects are unable to anticipate, design and maintain the complexity of interactions. They state the essence of autonomic computing is system self-management, freeing administrators from low-level task management while delivering better system behavior. A general problem of modern distributed computing systems is that their complexity, and in particular the complexity of their management, is becoming a significant limiting factor in their further development. Large companies and institutions are employing large-scale computer networks for communication and computation. The distributed applications running on these computer networks are diverse and deal with multiple tasks, ranging from internal control processes to presenting web content to customer support. Additionally, mobile computing is pervading these networks at an increasing speed: employees need to communicate with their companies while they are not in their office. They do so by using laptops, personal digital assistants, or mobile phones with diverse forms of wireless technologies to access their companies' data. This creates an enormous complexity in the overall computer network which is hard to control manually by human operators. Manual control is time-consuming, expensive, and error-prone. The manual effort needed to control a growing networked computer-system tends to increase quickly. 80% of such problems in infrastructure happen at the client specific application and database layer. Most 'autonomic' service providers guarantee only up to the basic plumbing layer (power, hardware, operating system, network and basic database parameters). == Characteristics of autonomic systems == A possible solution could be to enable modern, networked computing systems to manage themselves without direct human intervention. The Autonomic Computing Initiative (ACI) aims at providing the foundation for autonomic systems. It is inspired by the autonomic nervous system of the human body. This nervous system controls important bodily functions (e.g. respiration, heart rate, and blood pressure) without any conscious intervention. In a self-managing autonomic system, the human operator takes on a new role: instead of controlling the system directly, he/she defines general policies and rules that guide the self-management process. For this process, IBM defined the following four types of property referred to as self-star (also called self-, self-x, or auto-) properties. Self-configuration: Automatic configuration of components; Self-healing: Automatic discovery, and correction of faults; Self-optimization: Automatic monitoring and control of resources to ensure the optimal functioning with respect to the defined requirements; Self-protection: Proactive identification and protection from arbitrary attacks. Others such as Poslad and Nami and Sharifi have expanded on the set of self-star as follows: Self-regulation: A system that operates to maintain some parameter, e.g., Quality of service, within a reset range without external control; Self-learning: Systems use machine learning techniques such as unsupervised learning which does not require external control; Self-awareness (also called Self-inspection and Self-decision): System must know itself. It must know the extent of its own resources and the resources it links to. A system must be aware of its internal components and external links in order to control and manage them; Self-organization: System structure driven by physics-type models without explicit pressure or involvement from outside the system; Self-creation (also called Self-assembly, Self-replication): System driven by ecological and social type models without explicit pressure or involvement from outside the system. A system's members are self-motivated and self-driven, generating complexity and order in a creative response to a continuously changing strategic demand; Self-management (also called self-governance): A system that manages itself without external intervention. What is being managed can vary dependent on the system and application. Self -management also refers to a set of self-star processes such as autonomic computing rather than a single self-star process; Self-description (also called self-explanation or Self-representation): A system explains itself. It is capable of being understood (by humans) without further explanation. IBM has set forth eight conditions that define an autonomic system: The system must know itself in terms of what resources it has access to, what its capabilities and limitations are and how and why it is connected to other systems; be able to automatically configure and reconfigure itself depending on the changing computing environment; be able to optimize its performance to ensure the most efficient computing process; be able to work around encountered problems by either repairing itself or routing functions away from the trouble; detect, identify and protect itself against various types of attacks to maintain overall system security and integrity; adapt to its environment as it changes, interacting with neighboring systems and establishing communication protocols; rely on open standards and cannot exist in a proprietary environment; anticipate the demand on its resources while staying transparent to users. Even though the purpose and thus the behaviour of autonomic systems vary from system to system, every autonomic system should be able to exhibit a minimum set of properties to achieve its purpose: Automatic: This essentially means being able to self-control its internal functions and operations. As such, an autonomic system must be self-contained and able to start-up and operate without any manual intervention or external help. Again, the knowledge required to bootstrap the system (Know-how) must be inherent to the system. Adaptive: An autonomic system must be able to change its operation (i.e., its configuration, state and functions). This will allow the system to cope with temporal and spatial changes in its operational context either long term (environment customisation/optimisation) or short term (exceptional conditions such as malicious attacks, faults, etc.). Aware: An autonomic system must be able to monitor (sense) its operational context as well as its internal state in order to be able to asses
Read more →
Fuzzy finite element

The fuzzy finite element method combines the well-established finite element method with the concept of fuzzy numbers, the latter being a special case of a fuzzy set. The advantage of using fuzzy numbers instead of real numbers lies in the incorporation of uncertainty (on material properties, parameters, geometry, initial conditions, etc.) in the finite element analysis. One way to establish a fuzzy finite element (FE) analysis is to use existing FE software (in-house or commercial) as an inner-level module to compute a deterministic result, and to add an outer-level loop to handle the fuzziness (uncertainty). This outer-level loop comes down to solving an optimization problem. If the inner-level deterministic module produces monotonic behavior with respect to the input variables, then the outer-level optimization problem is greatly simplified, since in this case the extrema will be located at the vertices of the domain.
Read more →
WebCrow

The WebCrow is a research project carried out at the Information Engineering Department of the University of Siena with the purpose of automatically solving crosswords. == The Project == The scientific relevance of the project can be understood considering that cracking crosswords requires human-level knowledge. Unlike chess and related games and there is no closed world configuration space. A first nucleus of technology, such as search engines, information retrieval, and machine learning techniques enable computers to enfold with semantics real-life concepts. The project is based on a software system whose major assumption is to attack crosswords making use of the Web as its primary source of knowledge. WebCrow is very fast and often thrashes human challengers in competitions, especially on multi language crossword schemes. A distinct feature of the WebCrow software system is to combine properly natural language processing (NLP) techniques, the Google web search engine, and constraint satisfaction algorithms from artificial intelligence to acquire knowledge and to fill the schema. The most important component of WebCrow is the Web Search Module (WSM), which implements a domain specific web based question answering algorithm. The way WebCrow approaches crosswords solving is quite different with respect to humans: Whereas we tend to first answer clues we are sure of and then proceed filling the schema by exploiting the already answered clues as hints, WebCrow uses two clearly distinct stages. In the first one, it processes all the clues and tries to answer them all: For each clue it finds many possible candidates and sorts them according to complex ranking models mainly based on a probability criteria. In the second stage, WebCrow uses constraint satisfaction algorithms to fill the grid with the overall most likely combination of clue answers. In order to interact with Google, first of all, WebCrow needs to compose queries on the basis of the given clues. This is done by query expansion, whose purpose is to convert the clue into a query expressed by a simplified and more appropriate language for Google. The retrieved documents are parsed so as to extract a list of word candidates that are congruent with the crossword length constraints. Crosswords can hardly be faced by using encyclopedic knowledge only, since many clues are wordplays or are otherwise purposefully very ambiguous. This enigmatic component of crosswords is faced by a massive use of database of solved crosswords, and by automatic reasoning on a properly organized knowledge base of wired rules. Last but not the least, the final constraint satisfaction step is very effective to fill the correct candidate, even though, unlike humans, the system can not rely on very high confidence on the correctness of the answer. == Competitions == WebCrow speed and effectiveness has been tested many times in man-machine competitions on Italian, English and multi-language crosswords The outcome of the tests is that WebCrow can successfully compete with average human players on single language schemes and reaches expert level performance in multi-language crosswords. However, WebCrow has not reached expert level in single-language crosswords, yet. === ECAI-06 Competition === On August 30, 2006, at the European Conference on Artificial Intelligence (ECAI2006), 25 conference attendees and 53 internet connected crosswords lovers, competed with WebCrow in an official challenge organized within the conference program. The challenge consisted in 5 different crosswords (2 in Italian, 2 in English and one multi-language in Italian and English) and 15 minutes were assigned for each crossword. WebCrow ranked 21 out of 74 participants in the Italian competition, and won both the bilingual and English competitions. === Other Competitions === Several competitions have been held in Florence, Italy within the Creativity Festival in December 2006, and another official conference competition took place in Hyderabad, India in January 2007, within the International Conference of Artificial Intelligence, where it ranked second out of 25 participants.
Read more →
Fully probabilistic design

Decision making (DM) can be seen as a purposeful choice of action sequences. It also covers control, a purposeful choice of input sequences. As a rule, it runs under randomness, uncertainty and incomplete knowledge. A range of prescriptive theories have been proposed how to make optimal decisions under these conditions. They optimise sequence of decision rules, mappings of the available knowledge on possible actions. This sequence is called strategy or policy. Among various theories, Bayesian DM is broadly accepted axiomatically based theory that solves the design of optimal decision strategy. It describes random, uncertain or incompletely known quantities as random variables, i.e. by their joint probability expressing belief in their possible values. The strategy that minimises expected loss (or equivalently maximises expected reward) expressing decision-maker's goals is then taken as the optimal strategy. While the probabilistic description of beliefs is uniquely and deductively driven by rules for joint probabilities, the composition and decomposition of the loss function have no such universally applicable formal machinery. Fully probabilistic design (of decision strategies or control, FPD) removes the mentioned drawback and expresses also the DM goals of by the "ideal" probability, which assigns high (small) values to desired (undesired) behaviours of the closed DM loop formed by the influenced world part and by the used strategy. FPD has axiomatic basis and has Bayesian DM as its restricted subpart. FPD has a range of theoretical consequences , and, importantly, has been successfully used to quite diverse application domains.
Read more →
Generative engine optimization

Generative engine optimization (GEO) is one of the names given to the practice of structuring digital content and managing online presence to improve visibility in responses generated by generative artificial intelligence (AI) systems. The practice influences the way large language models (LLMs) retrieve, summarize, and present information in response to user queries. Related terms include answer engine optimization (AEO) and artificial intelligence optimization (AIO). The concept of GEO first appeared in response to generative AI technologies being integrated into mainstream search and information retrieval systems. Tools are used to monitor how websites and brands are cited, referenced, or incorporated into responses produced by large language models. == Terminology == Several overlapping terms describe related practices, and usage varies across practitioners, vendors, and publications. No consensus definition distinguishing these terms had been established in the academic literature as of early 2026, and the terms are frequently used interchangeably in trade and practitioner contexts. Other terms for the same concept include answer engine optimization (AEO), large language model optimization (LLMO), artificial intelligence optimization (AIO), and AI SEO. In 2026, Google released documentation entitled "Optimizing your website for generative AI features on Google Search." According to this documentation, "optimizing for generative AI search is optimizing for the search experience, and thus still SEO.” This position had previously been shared at conferences, with 2026 being the first time Google released official documentation stating it. == Factors influencing generative engine optimization == By early 2026, the focus of GEO practitioners shifted from simple keyword placement to "semantic relevance", a metric driven by the integration of advertising into conversational AI. OpenAI and Google began monetizing AI search results, which is not currently considered an aspect of generative engine optimization but is adjacent.
Read more →
The Last Question

"The Last Question" is a science fiction short story by American writer Isaac Asimov. It first appeared in the November 1956 issue of Science Fiction Quarterly; and in the anthologies in the collections Nine Tomorrows (1959), The Best of Isaac Asimov (1973), Robot Dreams (1986), The Best Science Fiction of Isaac Asimov (1986), the retrospective Opus 100 (1969), and Isaac Asimov: The Complete Stories, Vol. 1 (1990). While he also considered it one of his best works, "The Last Question" was Asimov's favorite short story of his own authorship, and is one of a loosely connected series of stories concerning a fictional computer called Multivac. Through successive generations, humanity questions Multivac on the subject of entropy. The story blends science fiction, theology, and philosophy. It has been recognized as a counterpoint to Fredric Brown's short short story "Answer", published two years earlier. == History == In conceiving Multivac, Asimov was extrapolating the trend towards centralization that characterized computation technology planning in the 1950s to an ultimate centrally managed global computer. After seeing a planetarium adaptation of his work, Asimov "privately" concluded that the story was his best science fiction yet written. He placed it just higher than "The Ugly Little Boy" (September 1958) and "The Bicentennial Man" (1976). The story asks the question of humanity's fate, and human existence as a whole, highlighting Asimov's focus on important aspects of our future like population growth and environmental issues. "The Last Question" ranks with "Nightfall" (1941) as one of Asimov's best-known and most acclaimed short stories. He wrote in 1973 that he appreciated how easy the story was to write after he had the idea. He was so often approached by fans who remembered the story but not the title, that in one instance he gave the answer, correctly, before the fan had even described the story. == Plot summary == By the year 2061, Multivac, a self-adjusting and self-correcting computer, has allowed mankind to reach beyond the planetary confines of Earth and harness solar energy. Two technicians, Adell and Lupov, celebrate Multivac's role in this development. Over drinks, they discuss that the sun will expire due to the second law of thermodynamics, which states that entropy inevitably increases. When Adell asks Multivac whether this can be reversed, the computer responds that it has insufficient data to answer. In several episodes over ten trillion years, increasingly advanced humans pose the same question to the computers of their time. Each time the computer gives the same response. At the heat death of the universe, the last disembodied consciousness of Man asks the question a final time of a computer that resides in hyperspace before merging with it. After collecting the last data from the dead universe, the computer continues to process it alone and finds an answer to the last question. Having no one to tell it to, it proceeds to demonstrate by saying "LET THERE BE LIGHT!" == Themes == === Philosophy === Although science and religion are frequently presented as having an oppositional relationship, "The Last Question" explores some biblical contexts ("Let there be light"). In Asimov's story, aspects like the great meaning of existence are culminated through both technology and human knowledge. The evolution from Multivac to AC also emulates a sort of cycle of existence. === Dystopian happy ending === Multivac's purpose was conceptualized with a desire for knowledge, promoting the idea that more knowledge will lead to a better and more fruitful future for humanity. However, the computer's answers regarding the future suggest an inevitable exhaustion of the Sun, and this thirst for knowledge becomes an obsession with the future. The story's end displays a dichotomy between annihilation and peace. == Dramatic adaptations == === Planetarium shows === "The Last Question" was first adapted for the Abrams Planetarium at Michigan State University (in 1966), featuring the voice of Leonard Nimoy, as Asimov wrote in his autobiography In Joy Still Felt (1980). It was adapted for the Strasenburgh Planetarium in Rochester, New York (in 1969), under the direction of Ian C. McLennan. It was adapted for the Edmonton Space Sciences Centre in Edmonton, Alberta (early 1970s), under the direction of John Hault. It was adapted for the Gates Planetarium at the Denver Museum of Natural History in 1973 under the direction of Mark B. Peterson It subsequently played at the: Fels Planetarium of the Franklin Institute in Philadelphia in 1973 Planetarium of the Reading School District in Reading, Pennsylvania in 1974 Buhl Planetarium, Pittsburgh in 1974 The Space Transit Planetarium of the Museum of Science in Miami during 1977 Vanderbilt Planetarium in Centerport New York, in 1978, read by singer-songwriter and Long Island resident Harry Chapin. Hansen Planetarium in Salt Lake City, Utah (in 1980 and 1989) A reading of the story was played on BBC Radio 7 in 2008 and 2009. Gates Planetarium in Denver, Colorado (in early 2020) In 1989 Asimov updated the star show adaptation to add in quasars and black holes. The story was adapted as a comic book by Don Thompson and drawn by John Estes in the third issue of ORBiT.
Read more →
Transdermal optical imaging

Transdermal optical imaging, also known as transdermal optical imagery or TOI, is a method of detecting blood flow of the face by measuring hemoglobin concentration using a digital video camera. Because of the translucent property of skin, light can travel beneath the skin and re-emit. The re-emitted light from underneath the skin is affected by chromophores, mainly hemoglobin and melanin, which differ in color. The color difference allows TOI machine learning software to separate the images into layers, which are known as bitplanes. It extracts signals rich in hemoglobin and signals rich in melanin, then discards the melanin-rich signals to obtain a recording of hemoglobin changes under the skin. Transdermal optical imaging has been proposed as an alternative to cuff-based methods of measuring blood pressure because it is able to measure heart rate accurately in a "contactless and non-invasive" way. Transdermal optical imaging may be able to detect hidden emotions using the patterns of blood flow in the face.
Read more →
Microscope image processing

Microscope image processing is a broad term that covers the use of digital image processing techniques to process, analyze and present images obtained from a microscope. Such processing is now commonplace in a number of diverse fields such as medicine, biological research, cancer research, drug testing, metallurgy, etc. A number of manufacturers of microscopes now specifically design in features that allow the microscopes to interface to an image processing system. == Image acquisition == Until the early 1990s, most image acquisition in video microscopy applications was typically done with an analog video camera, often simply closed circuit TV cameras. While this required the use of a frame grabber to digitize the images, video cameras provided images at full video frame rate (25-30 frames per second) allowing live video recording and processing. While the advent of solid state detectors yielded several advantages, the real-time video camera was actually superior in many respects. Today, acquisition is usually done using a CCD camera mounted in the optical path of the microscope. The camera may be full colour or monochrome. Very often, very high resolution cameras are employed to gain as much direct information as possible. Cryogenic cooling is also common, to minimise noise. Often digital cameras used for this application provide pixel intensity data to a resolution of 12-16 bits, much higher than is used in consumer imaging products. Ironically, in recent years, much effort has been put into acquiring data at video rates, or higher (25-30 frames per second or higher). What was once easy with off-the-shelf video cameras now requires special, high speed electronics to handle the vast digital data bandwidth. Higher speed acquisition allows dynamic processes to be observed in real time, or stored for later playback and analysis. Combined with the high image resolution, this approach can generate vast quantities of raw data, which can be a challenge to deal with, even with a modern computer system. While current CCD detectors allow very high image resolution, often this involves a trade-off because, for a given chip size, as the pixel count increases, the pixel size decreases. As the pixels get smaller, their well depth decreases, reducing the number of electrons that can be stored. In turn, this results in a poorer signal-to-noise ratio. For best results, one must select an appropriate sensor for a given application. Because microscope images have an intrinsic limiting resolution, it often makes little sense to use a noisy, high resolution detector for image acquisition. A more modest detector, with larger pixels, can often produce much higher quality images because of reduced noise. This is especially important in low-light applications such as fluorescence microscopy. Moreover, one must also consider the temporal resolution requirements of the application. A lower resolution detector will often have a significantly higher acquisition rate, permitting the observation of faster events. Conversely, if the observed object is motionless, one may wish to acquire images at the highest possible spatial resolution without regard to the time required to acquire a single image. == 2D image techniques == Image processing for microscopy application begins with fundamental techniques intended to most accurately reproduce the information contained in the microscopic sample. This might include adjusting the brightness and contrast of the image, averaging images to reduce image noise and correcting for illumination non-uniformities. Such processing involves only basic arithmetic operations between images (i.e. addition, subtraction, multiplication and division). The vast majority of processing done on microscope image is of this nature. Another class of common 2D operations called image convolution are often used to reduce or enhance image details. Such "blurring" and "sharpening" algorithms in most programs work by altering a pixel's value based on a weighted sum of that and the surrounding pixels (a more detailed description of kernel based convolution deserves an entry for itself) or by altering the frequency domain function of the image using Fourier Transform. Most image processing techniques are performed in the Frequency domain. Other basic two dimensional techniques include operations such as image rotation, warping, color balancing etc. At times, advanced techniques are employed with the goal of "undoing" the distortion of the optical path of the microscope, thus eliminating distortions and blurring caused by the instrumentation. This process is called deconvolution, and a variety of algorithms have been developed, some of great mathematical complexity. The end result is an image far sharper and clearer than could be obtained in the optical domain alone. This is typically a 3-dimensional operation, that analyzes a volumetric image (i.e. images taken at a variety of focal planes through the sample) and uses this data to reconstruct a more accurate 3-dimensional image. == 3D image techniques == Another common requirement is to take a series of images at a fixed position, but at different focal depths. Since most microscopic samples are essentially transparent, and the depth of field of the focused sample is exceptionally narrow, it is possible to capture images "through" a three-dimensional object using 2D equipment like confocal microscopes. Software is then able to reconstruct a 3D model of the original sample which may be manipulated appropriately. The processing turns a 2D instrument into a 3D instrument, which would not otherwise exist. In recent times this technique has led to a number of scientific discoveries in cell biology. == Analysis == Analysis of images will vary considerably according to application. Typical analysis includes determining where the edges of an object are, counting similar objects, calculating the area, perimeter length and other useful measurements of each object. A common approach is to create an image mask which only includes pixels that match certain criteria, then perform simpler scanning operations on the resulting mask. It is also possible to label objects and track their motion over a series of frames in a video sequence.
Read more →
Fuzzy logic

Fuzzy logic is a form of many-valued logic in which the truth value of variables may be any real number between 0 and 1. It is employed to handle the concept of partial truth, where the truth value may range between completely true and completely false. By contrast, in Boolean logic, the truth values of variables may only be the integer values 0 or 1. The term fuzzy logic was introduced with the 1965 proposal of fuzzy set theory by mathematician Lotfi Zadeh. Basic fuzzy logic had, however, been studied since the 1920s, as infinite-valued logic—notably by Łukasiewicz and Tarski. The works of Zadeh and Joseph Goguen in the 1960s and 1970s went further by considering issues such as linguistic variables and lattices. Fuzzy logic is based on the observation that people make decisions based on imprecise and non-numerical information. Fuzzy models or fuzzy sets are mathematical means of representing vagueness and imprecise information (hence the term fuzzy). These models have the capability of recognising, representing, manipulating, interpreting, and using data and information that are vague and lack certainty. Fuzzy logic has been applied to many fields, from control theory to artificial intelligence. == Overview == Classical logic only permits conclusions that are either true or false. However, there are also propositions with variable answers, which one might find when asking a group of people to identify a color. In such instances, the truth appears as the result of reasoning from inexact or partial knowledge in which the sampled answers are mapped on a spectrum. Both degrees of truth and probabilities range between 0 and 1 and hence may seem identical at first, but fuzzy logic uses degrees of truth as a mathematical model of vagueness, while probability is a mathematical model of ignorance. === Applying truth values === A basic application might characterize various sub-ranges of a continuous variable. For instance, a temperature measurement for anti-lock brakes might have several separate membership functions defining particular temperature ranges needed to control the brakes properly. Each function maps the same temperature value to a truth value in the 0 to 1 range. These truth values can then be used to determine how the brakes should be controlled. Fuzzy set theory provides a means for representing uncertainty. === Linguistic variables === In fuzzy logic applications, non-numeric values are often used to facilitate the expression of rules and facts. A linguistic variable such as age may accept values such as young and its antonym old. Because natural languages do not always contain enough value terms to express a fuzzy value scale, it is common practice to modify linguistic values with adjectives or adverbs. For example, we can use the hedges rather and somewhat to construct the additional values rather old or somewhat young. == Fuzzy systems == === Mamdani === The most well-known system is the Mamdani rule-based one. It uses the following rules: Fuzzify all input values into fuzzy membership functions. Execute all applicable rules in the rulebase to compute the fuzzy output functions. De-fuzzify the fuzzy output functions to get "crisp" output values. ==== Fuzzification ==== Fuzzification is the process of assigning the numerical input of a system to fuzzy sets with some degree of membership. This degree of membership may be anywhere within the interval [0,1]. If it is 0 then the value does not belong to the given fuzzy set, and if it is 1 then the value completely belongs within the fuzzy set. Any value between 0 and 1 represents the degree of uncertainty that the value belongs in the set. These fuzzy sets are typically described by words, and so by assigning the system input to fuzzy sets, we can reason with it in a linguistically natural manner. For example, in the image below, the meanings of the expressions cold, warm, and hot are represented by functions mapping a temperature scale. A point on that scale has three "truth values"—one for each of the three functions. The vertical line in the image represents a particular temperature that the three arrows (truth values) gauge. Since the red arrow points to zero, this temperature may be interpreted as "not hot"; i.e. this temperature has zero membership in the fuzzy set "hot". The orange arrow (pointing at 0.2) may describe it as "slightly warm" and the blue arrow (pointing at 0.8) "fairly cold". Therefore, this temperature has 0.2 membership in the fuzzy set "warm" and 0.8 membership in the fuzzy set "cold". The degree of membership assigned for each fuzzy set is the result of fuzzification. Fuzzy sets are often defined as triangle or trapezoid-shaped curves, as each value will have a slope where the value is increasing, a peak where the value is equal to 1 (which can have a length of 0 or greater) and a slope where the value is decreasing. They can also be defined using a sigmoid function. One common case is the standard logistic function defined as S ( x ) = 1 1 + e − x {\displaystyle S(x)={\frac {1}{1+e^{-x}}}} which has the following symmetry property S ( x ) + S ( − x ) = 1. {\displaystyle S(x)+S(-x)=1.} From this it follows that ( S ( x ) + S ( − x ) ) ⋅ ( S ( y ) + S ( − y ) ) ⋅ ( S ( z ) + S ( − z ) ) = 1 {\displaystyle (S(x)+S(-x))\cdot (S(y)+S(-y))\cdot (S(z)+S(-z))=1} ==== Fuzzy logic operators ==== Fuzzy logic works with membership values in a way that mimics Boolean logic. To this end, replacements for basic operators ("gates") AND, OR, NOT must be available. There are several ways to accomplish this. A common replacement is called the Zadeh operators: For TRUE/1 and FALSE/0, the fuzzy expressions produce the same result as the Boolean expressions. There are also other operators, more linguistic in nature, called hedges that can be applied. These are generally adverbs such as very, or somewhat, which modify the meaning of a set using a mathematical formula. However, an arbitrary choice table does not always define a fuzzy logic function. In the paper (Zaitsev, et al), a criterion has been formulated to recognize whether a given choice table defines a fuzzy logic function and a simple algorithm of fuzzy logic function synthesis has been proposed based on introduced concepts of constituents of minimum and maximum. A fuzzy logic function represents a disjunction of constituents of minimum, where a constituent of minimum is a conjunction of variables of the current area greater than or equal to the function value in this area (to the right of the function value in the inequality, including the function value). Another set of AND/OR operators is based on multiplication, where Given any two of AND/OR/NOT, it is possible to derive the third. The generalization of AND is an instance of a t-norm. ==== IF-THEN rules ==== IF-THEN rules map input or computed truth values to desired output truth values. Example: Given a certain temperature, the fuzzy variable hot has a certain truth value, which is copied to the high variable. Should an output variable occur in several THEN parts, the values from the respective IF parts are combined using the OR operator. ==== Defuzzification ==== The goal is to get a continuous variable from fuzzy truth values. This would be easy if the output truth values were exactly those obtained from fuzzification of a given number. Since, however, all output truth values are computed independently, in most cases they do not represent such a set of numbers. One has then to decide for a number that matches best the "intention" encoded in the truth value. For example, for several truth values of fan_speed, an actual speed must be found that best fits the computed truth values of the variables 'slow', 'moderate' and so on. There is no single algorithm for this purpose. A common algorithm is For each truth value, cut the membership function at this value Combine the resulting curves using the OR operator Find the center-of-weight of the area under the curve The x position of this center is then the final output. === Takagi–Sugeno–Kang (TSK) === The Takagi–Sugeno or Takagi–Sugeno–Kang (TSK) system was introduced by Tomohiro Takagi and Michio Sugeno for fuzzy identification of systems and applications to modeling and control. Sugeno and Kang later developed methods for structure identification of such fuzzy models from input-output data. The TSK system is similar to Mamdani, but the defuzzification process is included in the execution of the fuzzy rules. These are also adapted, so that instead the consequent of the rule is represented through a polynomial function, usually constant in a zero-order model or linear in a first-order model. An example of a rule with a constant output would be: In this case, the output will be equal to the constant of the consequent (e.g. 2). In most scenarios we would have an entire rule base, with 2 or more rules. If this is the case, the output of the entire rule base will be the average of the consequent of each rule i (Y
Read more →
Competitions and prizes in artificial intelligence

There are a number of competitions and prizes to promote research in artificial intelligence. == General machine intelligence == The David E. Rumelhart Prize is an annual award for making a "significant contemporary contribution to the theoretical foundations of human cognition". The prize is $100,000. The Human-Competitive Award is an annual challenge started in 2004 to reward results "competitive with the work of creative and inventive humans". The prize is $10,000. Entries are required to use evolutionary computing. The Intel AI Global Impact Festival is an international annual competition held by Intel Corporation for school, and college students with prizes upwards of $15,000. It is about artificial intelligence technology. There are two age brackets in this competition, 13-18 Age Group, and 18 and Above Age Group. The IJCAI Award for Research Excellence is a biannual award given at the International Joint Conference on Artificial Intelligence (IJCAI) to researchers in artificial intelligence as a recognition of excellence of their career. The 2011 Federal Virtual World Challenge, advertised by The White House and sponsored by the U.S. Army Research Laboratory's Simulation and Training Technology Center, held a competition offering a total of US$52,000 in cash prize awards for general artificial intelligence applications, including "adaptive learning systems, intelligent conversational bots, adaptive behavior (objects or processes)" and more. The Machine Intelligence Prize is awarded annually by the British Computer Society for progress towards machine intelligence. The Kaggle – "the world's largest community of data scientists compete to solve most valuable problems". == Conversational behaviour == The Loebner prize is an annual competition to determine the best Turing test competitors. The winner is the computer system that, in the judges' opinions, demonstrates the "most human" conversational behaviour, they have an additional prize for a system that in their opinion passes a Turing test. This second prize has not yet been awarded. == Automatic control == === Pilotless aircraft === The International Aerial Robotics Competition is a long-running event begun in 1991 to advance the state of the art in fully autonomous air vehicles. This competition is restricted to university teams (although industry and governmental sponsorship of teams is allowed). Key to this event is the creation of flying robots which must complete complex missions without any human intervention. Successful entries are able to interpret their environment and make real-time decisions based only on a high-level mission directive (e.g., "find a particular target inside a building having certain characteristics which is among a group of buildings 3 kilometers from the aerial robot launch point"). In 2000, a $30,000 prize was awarded during the 3rd Mission (search and rescue), and in 2008, $80,000 in prize money was awarded at the conclusion of the 4th Mission (urban reconnaissance). === Driverless cars === The DARPA Grand Challenge is a series of competitions to promote driverless car technology, aimed at a congressional mandate stating that by 2015 one-third of the operational ground combat vehicles of the US Armed Forces should be unmanned. While the first race had no winner, the second awarded a $2 million prize for the autonomous navigation of a hundred-mile trail, using GPS, computers and a sophisticated array of sensors. In November 2007, DARPA introduced the DARPA Urban Challenge, a sixty-mile urban area race requiring vehicles to navigate through traffic. In November 2010 the US Armed Forces extended the competition with the $1.6 million prize Multi Autonomous Ground-robotic International Challenge to consider cooperation between multiple vehicles in a simulated-combat situation. Roborace will be a global motorsport championship with autonomously driving, electric vehicles. The series will be run as a support series during the Formula E championship for electric vehicles. This will be the first global championship for driverless cars. == Data-mining and prediction == The Netflix Prize was a competition for the best collaborative filtering algorithm that predicts user ratings for films, based on previous ratings. The competition was held by Netflix, an online DVD-rental service. The prize was $1,000,000. The Pittsburgh Brain Activity Interpretation Competition will reward analysis of fMRI data "to predict what individuals perceive and how they act and feel in a novel Virtual Reality world involving searching for and collecting objects, interpreting changing instructions, and avoiding a threatening dog." The prize in 2007 was $22,000. The Face Recognition Grand Challenge (May 2004 to March 2006) aimed to promote and advance face recognition technology. The American Meteorological Society's artificial intelligence competition involves learning a classifier to characterise precipitation based on meteorological analyses of environmental conditions and polarimetric radar data. == Cooperation and coordination == === Robot football === The RoboCup and Federation of International Robot-soccer Association (FIRA) are annual international robot soccer competitions. The International RoboCup Federation challenge is by 2050 "a team of fully autonomous humanoid robot soccer players shall win the soccer game, comply with the official rule of the FIFA, against the winner of the most recent World Cup." == Logic, reasoning and knowledge representation == The Herbrand Award is a prize given by Conference on Automated Deduction (CADE) Inc. to honour persons or groups for important contributions to the field of automated deduction. The prize is $1000. The CADE ATP System Competition (CASC) is a yearly competition of fully automated theorem provers for classical first order logic associated with the Conference on Automated Deduction (CADE) and International Joint Conference on Automated Reasoning (IJCAR). The competition was part of the Alan Turing Centenary Conference in 2012, with total prizes of 9000 GBP given by Google. The SUMO prize is an annual prize for the best open source ontology extension of the Suggested Upper Merged Ontology (SUMO), a formal theory of terms and logical definitions describing the world. The prize is $3000. The Hutter Prize for lossless compression of human knowledge is a cash prize which rewards compression improvements on a specific 100 MB English text file. The prize awards 500 euros for each one percent improvement, up to €50,000. The organizers believe that text compression and AI are equivalent problems and 3 prizes have been given, at around € 2k. The Cyc TPTP Challenge is a competition to develop reasoning methods for the Cyc comprehensive ontology and database of everyday common sense knowledge. The prize is 100 euros for "each winner of two related challenges". The Eternity II challenge was a constraint satisfaction problem very similar to the Tetravex game. The objective is to lay 256 tiles on a 16x16 grid while satisfying a number of constraints. The problem is known to be NP-complete. The prize was US$2,000,000. The competition ended in December 2010. == Games == The World Computer Chess Championship has been held since 1970. The International Computer Games Association continues to hold an annual Computer Olympiad which includes this event plus computer competitions for many other games. The Ing Prize was a substantial money prize attached to the World Computer Go Congress, starting from 1985 and expiring in 2000. It was a graduated set of handicap challenges against young professional players with increasing prizes as the handicap was lowered. At the time it expired in 2000, the unclaimed prize was 400,000 NT dollars for winning a 9-stone handicap match. The AAAI General Game Playing Competition is a competition to develop programs that are effective at general game playing. Given a definition of a game, the program must play it effectively without human intervention. Since the game is not known in advance the competitors cannot especially adapt their programs to a particular scenario. The prize in 2006 and 2007 was $10,000. The General Video Game AI Competition (GVGAI) poses the problem of creating artificial intelligence that can play a wide, and in principle unlimited, range of games. Concretely, it tackles the problem of devising an algorithm that is able to play any game it is given, even if the game is not known a priori. Additionally, the contests poses the challenge of creating level and rule generators for any game is given. This area of study can be seen as an approximation of General Artificial Intelligence, with very little room for game dependent heuristics. The competition runs yearly in different tracks: single player planning, two-player planning, single player learning, level and rule generation, and each track prizes ranging from 200 to 500 US dollars for winners and runner-ups. The 2007 Ultimate Computer Ches
Read more →
Deep learning speech synthesis

Deep learning speech synthesis refers to the application of deep learning models to generate natural-sounding human speech from written text (text-to-speech) or spectrum (vocoder). Deep neural networks are trained using large amounts of recorded speech and, in the case of a text-to-speech system, the associated labels and/or input text. == Formulation == Given an input text or some sequence of linguistic units Y {\displaystyle Y} , the target speech X {\displaystyle X} can be derived by X = arg ⁡ max P ( X | Y , θ ) {\displaystyle X=\arg \max P(X|Y,\theta )} where θ {\displaystyle \theta } is the set of model parameters. Typically, the input text will first be passed to an acoustic feature generator, then the acoustic features are passed to the neural vocoder. For the acoustic feature generator, the loss function is typically L1 loss (Mean Absolute Error, MAE) or L2 loss (Mean Square Error, MSE). These loss functions impose a constraint that the output acoustic feature distributions must be Gaussian or Laplacian. In practice, since the human voice band ranges from approximately 300 to 4000 Hz, the loss function will be designed to have more penalty on this range: l o s s = α loss human + ( 1 − α ) loss other {\displaystyle loss=\alpha {\text{loss}}_{\text{human}}+(1-\alpha ){\text{loss}}_{\text{other}}} where loss human {\displaystyle {\text{loss}}_{\text{human}}} is the loss from human voice band and α {\displaystyle \alpha } is a scalar, typically around 0.5. The acoustic feature is typically a spectrogram or Mel scale. These features capture the time-frequency relation of the speech signal, and thus are sufficient to generate intelligent outputs. The Mel-frequency cepstrum feature used in the speech recognition task is not suitable for speech synthesis, as it reduces too much information. == History == In September 2016, DeepMind released WaveNet, which demonstrated that deep learning-based models are capable of modeling raw waveforms and generating speech from acoustic features like spectrograms or mel-spectrograms. Although WaveNet was initially considered to be computationally expensive and slow to be used in consumer products at the time, a year after its release, DeepMind unveiled a modified version of WaveNet known as "Parallel WaveNet," a production model 1,000 faster than the original. This was followed by Google AI's Tacotron 2 in 2018, which demonstrated that neural networks could produce highly natural speech synthesis but required substantial training data—typically tens of hours of audio—to achieve acceptable quality. Tacotron 2 used an autoencoder architecture with attention mechanisms to convert input text into mel-spectrograms, which were then converted to waveforms using a separate neural vocoder. When trained on smaller datasets, such as 2 hours of speech, the output quality degraded while still being able to maintain intelligible speech, and with just 24 minutes of training data, Tacotron 2 failed to produce intelligible speech. In 2019, Microsoft Research introduced FastSpeech, which addressed speed limitations in autoregressive models like Tacotron 2. FastSpeech utilized a non-autoregressive architecture that enabled parallel sequence generation, significantly reducing inference time while maintaining audio quality. Its feedforward transformer network with length regulation allowed for one-shot prediction of the full mel-spectrogram sequence, avoiding the sequential dependencies that bottlenecked previous approaches. The same year saw the release of HiFi-GAN, a generative adversarial network (GAN)-based vocoder that improved the efficiency of waveform generation while producing high-fidelity speech. In 2020, the release of Glow-TTS introduced a flow-based approach that allowed for fast inference and voice style transfer capabilities. In March 2020, the free text-to-speech website 15.ai was launched. 15.ai gained widespread international attention in early 2021 for its ability to synthesize emotionally expressive speech of fictional characters from popular media with minimal amount of data. The creator of 15.ai (known pseudonymously as 15) stated that 15 seconds of training data is sufficient to perfectly clone a person's voice (hence its name, "15.ai"), a significant reduction from the previously known data requirement of tens of hours. 15.ai is credited as the first platform to popularize AI voice cloning in memes and content creation. 15.ai used a multi-speaker model that enabled simultaneous training of multiple voices and emotions, implemented sentiment analysis using DeepMoji, and supported precise pronunciation control via ARPABET. The 15-second data efficiency benchmark was later corroborated by OpenAI in 2024. == Semi-supervised learning == Currently, self-supervised learning has gained much attention through better use of unlabelled data. Research has shown that, with the aid of self-supervised loss, the need for paired data decreases. == Zero-shot speaker adaptation == Zero-shot speaker adaptation is promising because a single model can generate speech with various speaker styles and characteristic. In June 2018, Google proposed to use pre-trained speaker verification models as speaker encoders to extract speaker embeddings. The speaker encoders then become part of the neural text-to-speech models, so that it can determine the style and characteristics of the output speech. This procedure has shown the community that it is possible to use only a single model to generate speech with multiple styles. == Neural vocoder == In deep learning-based speech synthesis, neural vocoders play an important role in generating high-quality speech from acoustic features. The WaveNet model proposed in 2016 achieves excellent performance on speech quality. Wavenet factorised the joint probability of a waveform x = { x 1 , . . . , x T } {\displaystyle \mathbf {x} =\{x_{1},...,x_{T}\}} as a product of conditional probabilities as follows p θ ( x ) = ∏ t = 1 T p ( x t | x 1 , . . . , x t − 1 ) {\displaystyle p_{\theta }(\mathbf {x} )=\prod _{t=1}^{T}p(x_{t}|x_{1},...,x_{t-1})} where θ {\displaystyle \theta } is the model parameter including many dilated convolution layers. Thus, each audio sample x t {\displaystyle x_{t}} is conditioned on the samples at all previous timesteps. However, the auto-regressive nature of WaveNet makes the inference process dramatically slow. To solve this problem, Parallel WaveNet was proposed. Parallel WaveNet is an inverse autoregressive flow-based model which is trained by knowledge distillation with a pre-trained teacher WaveNet model. Since such inverse autoregressive flow-based models are non-auto-regressive when performing inference, the inference speed is faster than real-time. Meanwhile, Nvidia proposed a flow-based WaveGlow model, which can also generate speech faster than real-time. However, despite the high inference speed, parallel WaveNet has the limitation of needing a pre-trained WaveNet model, so that WaveGlow takes many weeks to converge with limited computing devices. This issue has been solved by Parallel WaveGAN, which learns to produce speech through multi-resolution spectral loss and GAN learning strategies.
Read more →
Color clock

The color clock, or color timer, is a part of the video circuitry of computer graphics hardware that works with analog color television systems. The clock is timed to match the timing of the color standard it works with, typically NTSC or PAL, ensuring that the data being read from the computer memory to create the image on-screen is in sync with the display. Depending on the speed of the color clock, the product of the resolution and number of colors is defined. Slow color clocks of many early games consoles and home computers resulted in limited color palettes at the highest resolutions.
Read more →
Mata v. Avianca, Inc.

Mata v. Avianca, Inc. was a U.S. District Court for the Southern District of New York case in which the Court dismissed a personal injury case against the airline Avianca and issued a $5,000 fine to the plaintiffs' lawyers who had submitted fake precedents generated by ChatGPT in their legal briefs. == Background == In February 2022, Roberto Mata filed a personal injury lawsuit in the U.S. District Court for the Southern District of New York against Avianca, alleging that he was injured when a metal serving cart struck his knee during an international flight. The plaintiff's lawyers used ChatGPT to generate a legal motion, which contained numerous fake legal cases involving fictitious airlines with fabricated quotations and internal citations. Avianca's lawyers notified the Court that they had been "unable to locate" a few legal cases cited in the legal motion. The Court could not locate the cases either and ordered the plaintiff's lawyers to provide copies of the cited legal cases. Mata's lawyers provided copies of documents purportedly containing all but one of the legal cases, after ChatGPT assured that the cases "indeed exist" and "can be found in reputable legal databases such as LexisNexis and Westlaw." == Opinion == In May 2023, Judge P. Kevin Castel dismissed the personal injury case against Avianca and ordered the plaintiff's attorneys to pay a $5,000 fine. Judge Castel noted numerous inconsistencies in the opinion summaries, describing one of the legal analyses as "gibberish." Judge Castel held that Mata's lawyers had acted with "subjective bad faith" sufficient for sanctions under Federal Rule of Civil Procedure Rule 11. == Impact == In July 2024, the American Bar Association issued its first formal ethics opinion on the responsibilities of lawyers using generative AI (GAI). The 15-page opinion outlines how the Rules of Professional Conduct apply to the use of GAI in the practice of law. Experts caution that lawyers cannot reasonably rely on the accuracy, completeness, or validity of content generated by GAI tools. Due to the continued usage of GAI in the practice of law, Mata has been described as a landmark case by legal professionals, as it is frequently cited by courts in cases where usage of GAI during the course of proceedings leads to the creation and citation of nonexistent caselaw.
Read more →
Adaptive neuro fuzzy inference system

An adaptive neuro-fuzzy inference system or adaptive network-based fuzzy inference system (ANFIS) is a kind of artificial neural network that is based on Takagi–Sugeno fuzzy inference system, a class of fuzzy models introduced by Tomohiro Takagi and Michio Sugeno for system identification and control. The technique was developed in the early 1990s. Since it integrates both neural networks and fuzzy logic principles, it has potential to capture the benefits of both in a single framework. Its inference system corresponds to a set of fuzzy IF–THEN rules that have learning capability to approximate nonlinear functions. Hence, ANFIS is considered to be a universal estimator. For using the ANFIS in a more efficient and optimal way, one can use the best parameters obtained by genetic algorithm. It has uses in intelligent situational aware energy management system. == ANFIS architecture == It is possible to identify two parts in the network structure, namely premise and consequence parts. In more details, the architecture is composed by five layers. The first layer takes the input values and determines the membership functions belonging to them. It is commonly called fuzzification layer. The membership degrees of each function are computed by using the premise parameter set, namely {a,b,c}. The second layer is responsible of generating the firing strengths for the rules. Due to its task, the second layer is denoted as "rule layer". The role of the third layer is to normalize the computed firing strengths, by dividing each value for the total firing strength. The fourth layer takes as input the normalized values and the consequence parameter set {p,q,r}. The values returned by this layer are the defuzzificated ones and those values are passed to the last layer to return the final output. === Fuzzification layer === The first layer of an ANFIS network describes the difference to a vanilla neural network. Neural networks in general are operating with a data pre-processing step, in which the features are converted into normalized values between 0 and 1. An ANFIS neural network doesn't need a sigmoid function, but it's doing the preprocessing step by converting numeric values into fuzzy values. Here is an example: Suppose, the network gets as input the distance between two points in the 2d space. The distance is measured in pixels and it can have values from 0 up to 500 pixels. Converting the numerical values into fuzzy numbers is done with the membership function which consists of semantic descriptions like near, middle and far. Each possible linguistic value is given by an individual neuron. The neuron “near” fires with a value from 0 until 1, if the distance is located within the category "near". While the neuron “middle” fires, if the distance in that category. The input value “distance in pixels” is split into three different neurons for near, middle and far.
Read more →