AI for Business

Explore the best AI for Business — independent reviews, comparisons, pricing and step-by-step how-to guides, curated by Aizhi.

• 

  Systems development life cycle

  The systems development life cycle (SDLC) describes the typical phases and progression between phases during the development of a computer-based system. These phases progress from inception to retirement. At base, there is just one life cycle, but the taxonomy used to describe it may vary; the cycle may be classified into different numbers of phases and various names may be used for those phases. The SDLC is analogous to the life cycle of a living organism from its birth to its death. In particular, the SDLC varies by system in much the same way that each living organism has a unique path through its life. The SDLC does not prescribe how engineers should go about their work to move the system through its life cycle. Prescriptive techniques are referred to using various terms such as methodology, model, framework, and formal process. Other terms are used for the same concept as SDLC, including software development life cycle (also SDLC), application development life cycle (ADLC), and system design life cycle (also SDLC). These other terms focus on a different scope of development and are associated with different prescriptive techniques, but are about the same essential life cycle. The term "life cycle" is often written without a space, as "lifecycle", with the former more popular in the past and in non-engineering contexts. The acronym SDLC was coined when the longer form was more popular and has remained associated with the expansion, even though the shorter form is popular in engineering. Also, SDLC is relatively unique as opposed to the TLA SDL, which is highly overloaded. == Phases == Depending on the source, the SDLC is described as having different phases and using different terms. Even so, there are common aspects. The following attempts to describe notable phases using notable terminology. The phases are somewhat ordered by the natural sequence of development, although they can be overlapping and iterative. === Conceptualization === During conceptualization (a.k.a. conceptual design, system investigation, feasibility), options and priorities are considered. A feasibility study can determine whether the development effort is worthwhile via activities such as understanding user needs, cost estimation, benefit analysis, and resource analysis. A study should address operational, financial, technical, human factors, and legal/political concerns. === Requirements analysis === Requirements analysis (a.k.a. preliminary design) involves understanding the problem and determining what is needed. Often this involves engaging users to define the requirements and recording them in a document known as a requirements specification. === Design === During the design phase (a.k.a. detail design), a solution is planned. The plan can include relatively high-level information such as describing the major components of the system. The plan can include relatively low-level information such as describing functions, screen layout, business rules, and process flow. The design phase is informed by the requirements of the system. The design must satisfy each requirement. The design may be recorded in textual documents as well as functional hierarchy diagrams, example screen images, business rules, process diagrams, pseudo-code, and data models. === Construction === During construction (a.k.a. implementation, production), the system is realized. Based on the design, hardware and software components are created and integrated. This phase includes testing sub-components, components and the integration of some components, but typically does not include testing at the complete system level. This phase may include the development of training materials, including user manuals and help files. === Acceptance === The acceptance phase (a.k.a. system testing) is about testing the complete system to ensure that it meets customer expectations (requirements). === Deployment === The deployment phase (a.k.a. implementation) involves the logistics of delivery to the customer. Some systems are deployed as a single instance (i.e. in the cloud), and deployment may be ad hoc and manual. Some systems are built in quantity and are associated with manufacturing process and commissioning. This phase may include training users to use the system. It may include transitioning future development to support staff. === Maintenance === During the maintenance phase (a.k.a. operation, utilization, support) development is largely inactive, although this phase does include customer support for resolving user issues and recording suggestions for improvement. Fixes and enhancements are handled by returning to the first phase, conceptualization. For minor changes, the cycle may be significantly abbreviated compared to initial development. === Decommission === Decommission (a.k.a. disposition, retirement, phase-out) is when the system is removed from use, i.e., when it reaches end-of-life. == Practices == === Management and control === SDLC phase objectives are described in this section with key deliverables, a description of recommended tasks, and a summary of related control objectives for effective management. It is critical for the project manager to establish and monitor control objectives while executing projects. Control objectives are clear statements of the desired result or purpose and should be defined and monitored throughout a project. Control objectives can be grouped into major categories (domains), and relate to the SDLC phases as shown in the figure. To manage and control a substantial SDLC initiative, a work breakdown structure (WBS) captures and schedules the work. The WBS and all programmatic material should be kept in the "project description" section of the project notebook. The project manager chooses a WBS format that best describes the project. The diagram shows that coverage spans numerous phases of the SDLC, but the associated MCD (Management Control Domains) shows mappings to SDLC phases. For example, Analysis and Design is primarily performed as part of the Acquisition and Implementation Domain, and System Build and Prototype is primarily performed as part of delivery and support. === Work breakdown structured organization === The upper section of the WBS provides an overview of the project scope and timeline. It should also summarize the major phases and milestones. The middle section is based on the SDLC phases. WBS elements consist of milestones and tasks to be completed rather than activities to be undertaken, and have a deadline. Each task has a measurable output (e.g., an analysis document). A WBS task may rely on one or more activities (e.g., coding). Parts of the project needing support from contractors should have a statement of work (SOW). The development of an SOW does not occur during a specific phase of SDLC but is developed to include the work from the SDLC process that may be conducted by contractors. === Baselines === Baselines are established after four of the five phases of the SDLC, and are critical to the iterative nature of the model. Baselines become milestones. functional baseline: established after the conceptual design phase. allocated baseline: established after the preliminary design phase. product baseline: established after the detailed design and development phase. updated product baseline: established after the production construction phase. In the following diagram, these stages are divided into ten steps, from definition to creation and modification of IT work products:

  Read more →
• 

  Lexalytics

  Lexalytics, Inc. provides sentiment and intent analysis to an array of companies using SaaS and cloud based technology. Salience 6, the engine behind Lexalytics, was built as an on-premises, multi-lingual text analysis engine. It is leased to other companies who use it to power filtering and reputation management programs. In July, 2015 Lexalytics acquired Semantria to be used as a cloud option for its technology. In September, 2021 Lexalytics was acquired by CX company InMoment. == History == Lexalytics spun into existence in January 2003 out of a content management startup called Lightspeed. Lightspeed consolidated on America's West Coast. Jeff Catlin, a Lightspeed General Manager, and Mike Marshall, a Lighstpeed Principal Engineer, convinced investors to give them the East Coast company so as to avoid shutdown costs. Catlin and Marshall renamed the operation Lexalytics. Catlin took on the role of chief executive officer with Marshall working as Chief Technology Officer. Lexalytics opted to not accept venture cash. Instead, the company initially shared sales and marketing expenses with U.K. based document management company Infonic. The partner companies soon formed a joint venture in July 2008, which was later dissolved. Since then, Lexalytics has worked with many other companies, like Bottlenose, Salesforce, Thomson Reuters, Oracle and DataSift. Relationships with social media monitoring companies like Datasift tend to find Lexalytics’ Salience engine baked into the product itself. Lexalytics is used similarly to monitor sentiment as it relates to stock trading. In December 2014, Lexalytics announced the latest iteration to its sentiment analysis engine, Salience 6. Earlier that year Lexalytics acquired Semantria in a bid to appeal to a wider variety of business models. Created by former Lexalytics Marketing Director Oleg Rogynskyy, Semantria is a SaaS text mining service offered as an API and Excel based plugin that measures sentiment. The goal of the acquisition, which cost Lexalytics less than US$10 million, was to expand the customer base both within the United States and abroad with multilingual support. The engine that powers Semantria, Salience, is grounded in its deep learning ability. An example of this is its concept matrix, which allows Salience an understanding of concepts and relationship between concepts based on a detailed reading of the entire repository of Wikipedia. This matrix allows Salience to use Wikipedia for automatic categorization. Along with features like the concept matrix, Salience supports 16 international languages. The engine has earned Lexalytics a spot on EContent's “Top 100 Companies in the Digital Content Industry” List for 2014–2015. In September 2018, Lexalytics launched document data extraction market using natural language processing (NLP).

  Read more →
• 

  Abdul Majid Bhurgri Institute of Language Engineering

  Abdul Majid Bhurgri Institute of Language Engineering (Sindhi: عبدالماجد ڀرڳڙي انسٽيٽيوٽ آف لئنگئيج انجنيئرنگ) is an autonomous body under the administrative control of the Culture, Tourism and Antiquities Department, Government of Sindh established for bringing Sindhi language at par with national and international languages in all computational process and Natural language processing. == Establishment == In recognition to services of Abdul-Majid Bhurgri, who is the founder of Sindhi computing, Government of Sindh has established the institute after his name. The institute was primarily initiated on the concept given by a language engineer and linguist Amar Fayaz Buriro in briefing to the Minister, Culture, Tourism and Antiquities, Government of Sindh, Syed Sardar Ali Shah on 21 February 2017 on celebration of International Mother Language Day in Sindhi Language Authority, Hyderabad, Sindh. After the presentation and concept given by Amar Fayaz Buriro, the minister Syed Sardar Ali Shah had announced the Institute. Then, Government of Sindh added the development scheme in the Budget of fiscal year 2017-2018. == Projects == The Institute has developed several projects aimed at advancing the Sindhi language and promoting linguistic research. Notable initiatives include the AMBILE Hamiz Ali Sindhi Optical character recognition, which allows for the accurate digitization of Sindhi text, and the ongoing Sindhi WordNet System, a project to build a comprehensive lexical database for Natural language processing. The institute has also created the Font, which integrates symbols from the Indus script, Khudabadi script, and modern Perso-Arabic Script Code for Information Interchange into a single resource for researchers]. Additionally, institute has developed online converter tools that automatically transliterate between the Arabic-Perso script and Devanagari script, improving linguistic accessibility. Another key project is Bhittaipedia, a digital platform dedicated to the preservation and dissemination of the poetry of Shah Abdul Latif Bhittai, one of Sindh's most renowned poet. == Location == The institute is established behind Sindh Museum and Sindhi Language Authority, N-5 National Highway, Qasimabad, Hyderabad, Sindh.

  Read more →
• 

  Topological deep learning

  Topological deep learning (TDL) is a research field that extends deep learning to handle complex, non-Euclidean data structures. Traditional deep learning models, such as convolutional neural networks (CNNs) and recurrent neural networks (RNNs), excel in processing data on regular grids and sequences. However, scientific and real-world data often exhibit more intricate data domains encountered in scientific computations, including point clouds, meshes, time series, scalar fields graphs, or general topological spaces like simplicial complexes and CW complexes. TDL addresses this by incorporating topological concepts to process data with higher-order relationships, such as interactions among multiple entities and complex hierarchies. This approach leverages structures like simplicial complexes and hypergraphs to capture global dependencies and qualitative spatial properties, offering a more nuanced representation of data. TDL also encompasses methods from computational and algebraic topology that permit studying properties of neural networks and their training process, such as their predictive performance or generalization properties. The mathematical foundations of TDL are algebraic topology, differential topology, and geometric topology. Therefore, TDL can be generalized for data on differentiable manifolds, knots, links, tangles, curves, etc. == History and motivation == Traditional techniques from deep learning often operate under the assumption that a dataset is residing in a highly-structured space (like images, where convolutional neural networks exhibit outstanding performance over alternative methods) or a Euclidean space. The prevalence of new types of data, in particular graphs, meshes, and molecules, resulted in the development of new techniques, culminating in the field of geometric deep learning, which originally proposed a signal-processing perspective for treating such data types. While originally confined to graphs, where connectivity is defined based on nodes and edges, follow-up work extended concepts to a larger variety of data types, including simplicial complexes and CW complexes, with recent work proposing a unified perspective of message-passing on general combinatorial complexes. An independent perspective on different types of data originated from topological data analysis, which proposed a new framework for describing structural information of data, i.e., their "shape," that is inherently aware of multiple scales in data, ranging from local information to global information. While at first restricted to smaller datasets, subsequent work developed new descriptors that efficiently summarized topological information of datasets to make them available for traditional machine-learning techniques, such as support vector machines or random forests. Such descriptors ranged from new techniques for feature engineering over new ways of providing suitable coordinates for topological descriptors, or the creation of more efficient dissimilarity measures. Contemporary research in this field is largely concerned with either integrating information about the underlying data topology into existing deep-learning models or obtaining novel ways of training on topological domains. == Learning on topological spaces == One of the core concepts in topological deep learning is considering the domain upon which this data is defined and supported. In case of Euclidean data, such as images, this domain is a grid, upon which the pixel value of the image is supported. In a more general setting this domain might be a topological domain. Studying and developing deep learning models that are supported ln topological domains constitute the essence of topological deep learning. Next, we introduce the most common topological domains that are encountered in a deep learning setting. These domains include, but not limited to, graphs, simplicial complexes, cell complexes, combinatorial complexes and hypergraphs. Given a finite set S of abstract entities, a neighborhood function N {\displaystyle {\mathcal {N}}} on S is an assignment that attach to every point x {\displaystyle x} in S a subset of S or a relation. Such a function can be induced by equipping S with an auxiliary structure. Edges provide one way of defining relations among the entities of S. More specifically, edges in a graph allow one to define the notion of neighborhood using, for instance, the one hop neighborhood notion. Edges however, limited in their modeling capacity as they can only be used to model binary relations among entities of S since every edge is connected typically to two entities. In many applications, it is desirable to permit relations that incorporate more than two entities. The idea of using relations that involve more than two entities is central to topological domains. Such higher-order relations allow for a broader range of neighborhood functions to be defined on S to capture multi-way interactions among entities of S. Next we review the main properties, advantages, and disadvantages of some commonly studied topological domains in the context of deep learning, including (abstract) simplicial complexes, regular cell complexes, hypergraphs, and combinatorial complexes. ==== Comparisons among topological domains ==== Each of the enumerated topological domains has its own characteristics, advantages, and limitations: Simplicial complexes Simplest form of higher-order domains. Extensions of graph-based models. Admit hierarchical structures, making them suitable for various applications. Hodge theory can be naturally defined on simplicial complexes. Require relations to be subsets of larger relations, imposing constraints on the structure. Cell Complexes Generalize simplicial complexes. Provide more flexibility in defining higher-order relations. Each cell in a cell complex is homeomorphic to an open ball, attached together via attaching maps. Boundary cells of each cell in a cell complex are also cells in the complex. Represented combinatorially via incidence matrices. Hypergraphs Allow arbitrary set-type relations among entities. Relations are not imposed by other relations, providing more flexibility. Do not explicitly encode the dimension of cells or relations. Useful when relations in the data do not adhere to constraints imposed by other models like simplicial and cell complexes. Combinatorial Complexes : Generalize and bridge the gaps between simplicial complexes, cell complexes, and hypergraphs. Allow for hierarchical structures and set-type relations. Combine features of other complexes while providing more flexibility in modeling relations. Can be represented combinatorially, similar to cell complexes. ==== Hierarchical structure and set-type relations ==== The properties of simplicial complexes, cell complexes, and hypergraphs give rise to two main features of relations on higher-order domains, namely hierarchies of relations and set-type relations. ===== Rank function ===== A rank function on a higher-order domain X is an order-preserving function rk: X → Z, where rk(x) attaches a non-negative integer value to each relation x in X, preserving set inclusion in X. Cell and simplicial complexes are common examples of higher-order domains equipped with rank functions and therefore with hierarchies of relations. ===== Set-type relations ===== Relations in a higher-order domain are called set-type relations if the existence of a relation is not implied by another relation in the domain. Hypergraphs constitute examples of higher-order domains equipped with set-type relations. Given the modeling limitations of simplicial complexes, cell complexes, and hypergraphs, we develop the combinatorial complex, a higher-order domain that features both hierarchies of relations and set-type relations. The learning tasks in TDL can be broadly classified into three categories: Cell classification: Predict targets for each cell in a complex. Examples include triangular mesh segmentation, where the task is to predict the class of each face or edge in a given mesh. Complex classification: Predict targets for an entire complex. For example, predict the class of each input mesh. Cell prediction: Predict properties of cell-cell interactions in a complex, and in some cases, predict whether a cell exists in the complex. An example is the prediction of linkages among entities in hyperedges of a hypergraph. In practice, to perform the aforementioned tasks, deep learning models designed for specific topological spaces must be constructed and implemented. These models, known as topological neural networks, are tailored to operate effectively within these spaces. === Topological neural networks === Central to TDL are topological neural networks (TNNs), specialized architectures designed to operate on data structured in topological domains. Unlike traditional neural networks tailored for grid-like structures, TNNs are adept at handling more intricate data representations, such as graphs

  Read more →
• 

  Graphics address remapping table

  The graphics address remapping table (GART), also known as the graphics aperture remapping table, or graphics translation table (GTT), is an I/O memory management unit (IOMMU) used by Accelerated Graphics Port (AGP) and PCI Express (PCIe) graphics cards. The GART allows the graphics card direct memory access (DMA) to the host system memory, through which buffers of textures, polygon meshes and other data are loaded. AMD later reused the same mechanism for I/O virtualization with other peripherals including disk controllers and network adapters. A GART is used as a means of data exchange between the main memory and video memory through which buffers (i.e. paging/swapping) of textures, polygon meshes and other data are loaded, but can also be used to expand the amount of video memory available for systems with only integrated or shared graphics (i.e. no discrete or inbuilt graphics processor), such as Intel HD Graphics processors. However, this type of memory (expansion) remapping has a caveat that affects the entire system: specifically, any GART, pre-allocated memory becomes pooled and cannot be utilised for any other purposes but graphics memory and display rendering. Since PCI Express, the GART is extended to the GTT (Graphics Translation Table), which act as a buffer or cache between system memory and graphics card, and in PCI Express, the GTT buffer size is changeable by the GPU driver. == Operating system support == === Windows === Support for AGP GART was added since Windows 95 OSR2. Later, support for GTT was added since Windows XP SP2 and Windows Vista. === Linux === Jeff Hartmann served as the primary maintainer of the Linux kernel's agpgart driver, which began as part of Brian Paul's Utah GLX accelerated Mesa 3D driver project. The developers primarily targeted Linux 2.4.x kernels, but made patches available against older 2.2.x kernels. Dave Jones heavily reworked agpgart for the Linux 2.6.x kernels, along with more contributions from Jeff Hartmann. === FreeBSD === In FreeBSD, the agpgart driver appeared in its 4.1 release. === Solaris === AGPgart support was introduced into Solaris Express Developer Edition as of its 7/05 release.

  Read more →
• 

  Transduction (machine learning)

  In logic, statistical inference, and supervised learning, transduction or transductive inference is reasoning from observed, specific (training) cases to specific (test) cases. In contrast, induction is reasoning from observed training cases to general rules, which are then applied to the test cases. The distinction is most interesting in cases where the predictions of the transductive model are not achievable by any inductive model. Note that this is caused by transductive inference on different test sets producing mutually inconsistent predictions. Transduction was introduced in a computer science context by Vladimir Vapnik in the 1990s, motivated by his view that transduction is preferable to induction since, according to him, induction requires solving a more general problem (inferring a function) before solving a more specific problem (computing outputs for new cases): "When solving a problem of interest, do not solve a more general problem as an intermediate step. Try to get the answer that you really need but not a more general one.". An example of learning which is not inductive would be in the case of binary classification, where the inputs tend to cluster in two groups. A large set of test inputs may help in finding the clusters, thus providing useful information about the classification labels. The same predictions would not be obtainable from a model which induces a function based only on the training cases. Some people may call this an example of the closely related semi-supervised learning, since Vapnik's motivation is quite different. The most well-known example of a case-bases learning algorithm is the k-nearest neighbor algorithm, which is related to transductive learning algorithms. Another example of an algorithm in this category is the Transductive Support Vector Machine (TSVM). A third possible motivation of transduction arises through the need to approximate. If exact inference is computationally prohibitive, one may at least try to make sure that the approximations are good at the test inputs. In this case, the test inputs could come from an arbitrary distribution (not necessarily related to the distribution of the training inputs), which wouldn't be allowed in semi-supervised learning. An example of an algorithm falling in this category is the Bayesian Committee Machine (BCM). == Historical context == The mode of inference from particulars to particulars, which Vapnik came to call transduction, was already distinguished from the mode of inference from particulars to generalizations in part III of the Cambridge philosopher and logician W.E. Johnson's 1924 textbook, Logic. In Johnson's work, the former mode was called 'eduction' and the latter was called 'induction'. Bruno de Finetti developed a purely subjective form of Bayesianism in which claims about objective chances could be translated into empirically respectable claims about subjective credences with respect to observables through exchangeability properties. An early statement of this view can be found in his 1937 La Prévision: ses Lois Logiques, ses Sources Subjectives and a mature statement in his 1970 Theory of Probability. Within de Finetti's subjective Bayesian framework, all inductive inference is ultimately inference from particulars to particulars. == Example problem == The following example problem contrasts some of the unique properties of transduction against induction. A collection of points is given, such that some of the points are labeled (A, B, or C), but most of the points are unlabeled (?). The goal is to predict appropriate labels for all of the unlabeled points. The inductive approach to solving this problem is to use the labeled points to train a supervised learning algorithm, and then have it predict labels for all of the unlabeled points. With this problem, however, the supervised learning algorithm will only have five labeled points to use as a basis for building a predictive model. It will certainly struggle to build a model that captures the structure of this data. For example, if a nearest-neighbor algorithm is used, then the points near the middle will be labeled "A" or "C", even though it is apparent that they belong to the same cluster as the point labeled "B", compared to semi-supervised learning. Transduction has the advantage of being able to consider all of the points, not just the labeled points, while performing the labeling task. In this case, transductive algorithms would label the unlabeled points according to the clusters to which they naturally belong. The points in the middle, therefore, would most likely be labeled "B", because they are packed very close to that cluster. An advantage of transduction is that it may be able to make better predictions with fewer labeled points, because it uses the natural breaks found in the unlabeled points. One disadvantage of transduction is that it builds no predictive model. If a previously unknown point is added to the set, the entire transductive algorithm would need to be repeated with all of the points in order to predict a label. This can be computationally expensive if the data is made available incrementally in a stream. Further, this might cause the predictions of some of the old points to change (which may be good or bad, depending on the application). A supervised learning algorithm, on the other hand, can label new points instantly, with very little computational cost. == Transduction algorithms == Transduction algorithms can be broadly divided into two categories: those that seek to assign discrete labels to unlabeled points, and those that seek to regress continuous labels for unlabeled points. Algorithms that seek to predict discrete labels tend to be derived by adding partial supervision to a clustering algorithm. Two classes of algorithms can be used: flat clustering and hierarchical clustering. The latter can be further subdivided into two categories: those that cluster by partitioning, and those that cluster by agglomerating. Algorithms that seek to predict continuous labels tend to be derived by adding partial supervision to a manifold learning algorithm. === Partitioning transduction === Partitioning transduction can be thought of as top-down transduction. It is a semi-supervised extension of partition-based clustering. It is typically performed as follows: Consider the set of all points to be one large partition. While any partition P contains two points with conflicting labels: Partition P into smaller partitions. For each partition P: Assign the same label to all of the points in P. Of course, any reasonable partitioning technique could be used with this algorithm. Max flow min cut partitioning schemes are very popular for this purpose. === Agglomerative transduction === Agglomerative transduction can be thought of as bottom-up transduction. It is a semi-supervised extension of agglomerative clustering. It is typically performed as follows: Compute the pair-wise distances, D, between all the points. Sort D in ascending order. Consider each point to be a cluster of size 1. For each pair of points {a,b} in D: If (a is unlabeled) or (b is unlabeled) or (a and b have the same label) Merge the two clusters that contain a and b. Label all points in the merged cluster with the same label. === Continuous Label Transduction === These methods seek to regress continuous labels, often via manifold learning techniques. The idea is to learn a low-dimensional representation of the data and infer values smoothly across the manifold. == Applications and related concepts == Transduction is closely related to: Semi-supervised learning – uses both labeled and unlabeled data but typically induces a model. Case-based reasoning – such as the k-nearest neighbor (k-NN) algorithm, often considered a transductive method. Transductive Support Vector Machines (TSVM) – extend standard SVMs to incorporate unlabeled test data during training. Bayesian Committee Machine (BCM) – an approximation method that makes transductive predictions when exact inference is too costly.

  Read more →
• 

  Aikuma

  Aikuma is an Android app for collecting speech recordings with time-aligned translations. The app includes a text-free interface for consecutive interpretation, designed for users who are not literate. The Aikuma won Grand Prize in the Open Source Software World Challenge (2013). == Name == Aikuma means "meeting place" in Usarufa, a Papuan language where this software was first used in 2012. == History == Aikuma was developed with sponsorship from the National Science Foundation, including a $101,501 (US) project, "to use mobile telephones to collect larger amounts of data on undocumented endangered languages than would never be possible through usual fieldwork." Aikuma and its modified version (Lig-Aikuma) have been used for collecting substantial quantities of audio in remote indigenous villages. A modified version of the app, called Lig-Aikuma, has been developed at the Université Grenoble Alpes (LIG laboratory) and implements new features such as elicitation of speech from text, images and videos. == Similar Software == Lingua Libre is an online collaborative project and tool by the Wikimedia France association, which can be used as a tool for Language Preservation. Lingua Libre enables to record words, phrases, or sentences of any language, oral (audio recording) or signed (video recording). It is a highly efficient method to record endangered languages since up to 1000 words can be recorded per hour. All the content is under Free License, and speakers of minority languages are encouraged to record their own dialects.

  Read more →
• 

  INDECT

  INDECT is a research project in the area of intelligent security systems performed by several European universities since 2009 and funded by the European Union. The purpose of the project is to involve European scientists and researchers in the development of solutions to and tools for automatic threat detection through e.g. processing of CCTV camera data streams, standardization of video sequence quality for user applications, threat detection in computer networks as well as data and privacy protection. The area of research, applied methods, and techniques are described in the public deliverables which are available to the public on the project's website. Practically, all information related to the research is public. Only documents that comprise information related to financial data or information that could negatively influence the competitiveness and law enforcement capabilities of parties involved in the project are not published. This follows regulations and practices applied in EU research projects. == Application and target users == The main end-user of INDECT solutions are police forces and security services. The principle of operation of the project is detecting threats and identifying sources of threats, without monitoring and searching for particular citizens or groups of citizens. Then, the system operator (i.e. police officer) decides whether an intervention of services responsible for public security are required or not. Further investigation eventually leading to persons related to threats is performed, preserving the presumption of innocence, based on existing procedures already used by police services and prosecutors. As it can be found in the project deliverables, INDECT does not involve storage of personal data (such as names, addresses, identity document numbers, etc.). A similar, behavior-based surveillance program was SAMURAI (Suspicious and Abnormal behavior Monitoring Using a netwoRk of cAmeras & sensors for sItuation awareness enhancement). == Expected results == The main expected results of the INDECT project are: Trial of intelligent analysis of video and audio data for threat detection in urban environments Creation of tools and technology for privacy and data protection during storage and transmission of information using quantum cryptography and new methods of digital watermarking Performing computer-aided detection of threats and targeted crimes in Internet resources with privacy-protecting solutions Construction of a search engine for rapid semantic search based on watermarking of content related to child pornography and human organ trafficking Implementation of a distributed computer system that is capable of effective intelligent processing == Controversy == Some media and other sources accuse INDECT of privacy abuse, collecting personal data, and keeping information from the public. Consequently, these issues have been commented and discussed by some Members of the European Parliament. As seen in the project's documentation, INDECT does not involve mobile phone tracking or call interception. The rumors about testing INDECT during 2012 UEFA European Football Championship also turned out to be false. The mid-term review of the Seventh Framework Programme to the European Parliament strongly urges the European Commission to immediately make all documents available and to define a clear and strict mandate for the research goal, the application, and the end users of INDECT, and stresses a thorough investigation of the possible impact on fundamental rights. Nevertheless, according to Mr. Paweł Kowal, MEP, the project had the ethical review on 15 March 2011 in Brussels with the participation of ethics experts from Austria, France, Netherlands, Germany and Great Britain.

  Read more →
• 

  Environmental impact of AI

  The environmental impact of the design, training, deployment and use of artificial intelligence includes the greenhouse gas emissions from generating electricity for data centres and computing hardware, operational and upstream water use, and material impacts from hardware manufacturing, mining and electronic waste. Estimating AI's environmental effects can be difficult because results depend on how impacts are measured, including whether accounting includes only model computation or also data-centre overhead, idle capacity, hardware manufacture, and local electricity supply. As these issues have received greater attention, governments and regulators have increasingly considered data-centre reporting requirements, energy-efficiency standards, and broader transparency measures for AI-related resource use. == Carbon footprint and energy use == AI-related energy use arises at multiple stages, including model training, fine-tuning, inference, storage, networking, and supporting infrastructure such as cooling and power conversion. === Individual level === Published estimates of energy use per AI request vary widely across models, tasks and measurement methods. A benchmark study presented at the 2024 ACM Conference on Fairness, Accountability, and Transparency found substantial differences between task types, with lower energy use for some text tasks and much higher energy use for image generation in the study's test conditions. In that benchmark, simple classification tasks consumed about 0.002–0.007 Wh per prompt on average (about 9% of a smartphone charge for 1,000 prompts), while text generation and text summarisation each used about 0.05 Wh per prompt; image generation averaged 2.91 Wh per prompt, and the least efficient image model in the study used 11.49 Wh per image (roughly equivalent to half a smartphone charge). First-party measurements in production environments have also been published. A 2025 Google study on Gemini assistant serving reported median per-prompt energy, emissions, and water-use estimates under the authors' accounting framework, while noting that different system boundaries can produce substantially different results. The study reported a median text-prompt estimate of about 0.24 Wh, which is roughly as much energy as watching nine seconds of television. The study also stated that software and infrastructure improvements reduced energy use by a factor of 33 and carbon emissions by a factor of 44 for a typical prompt over one year within the authors' framework. Researchers at the University of Michigan measured the energy consumption of various Meta Llama 3.1 models released in 2024 and found that smaller language models (8 billion parameters) use about 114 joules (0.03167 Wh) per response, while larger models (405 billion parameters) require up to 6,700 joules (1.861 Wh) per response. This corresponds to the energy needed to run a microwave oven for roughly one-tenth of a second and eight seconds, respectively. Comparisons between AI systems and human labour for specific tasks have produced mixed results and remain sensitive to assumptions about output quality, workload and system boundaries. A 2024 study in Scientific Reports reported 130 to 2900 times lower estimated carbon emissions for selected AI systems than for human writers and illustrators under its assumptions. A later Scientific Reports paper reported a counterexample for programming tasks under its assumptions, finding 5 to 19 times higher estimated emissions for the evaluated AI system than for human programmers on the benchmark used in that study. === System level === ==== Energy use and efficiency ==== AI electricity intensity depends not only on model architecture but also on hardware and facility efficiency. Data-centre operators commonly report Power usage effectiveness (PUE), which measures the ratio of total facility energy to IT equipment energy; a lower PUE indicates less overhead energy for cooling and other supporting infrastructure. Operators may also publish metrics and case studies on hardware efficiency, cooling systems and power sourcing. In its 2024 environmental report, Google stated that its 2023 total greenhouse gas emissions increased 13% year over year, primarily because of increased data-centre energy consumption and supply-chain emissions, while also reporting lower PUE than industry averages for its own facilities. The International Energy Agency has also reported that data centres remain a relatively small share of global electricity use overall, but that their local effects can be much more pronounced because demand is geographically concentrated. ==== Carbon footprint ==== At system level, AI contributes to rising electricity demand in data centres and related infrastructure. The International Energy Agency estimated that data centres used about 415 TWh of electricity in 2024, or around 1.5% of global electricity consumption, and projected that data-centre electricity use could rise to about 945 TWh by 2030, with AI identified as the main driver of that growth alongside other digital services. The carbon footprint of AI systems depends strongly on electricity sources, hardware efficiency, utilisation rates, and what stages are included in the accounting. Training large models can require substantial electricity, while total lifecycle impacts also depend on deployment scale and the amount of inference performed after training. Early analyses of frontier-model development reported rapid historical growth in training compute for selected systems, although later trends have depended on changes in model design, hardware and efficiency gains. Accounting methods that include upstream or embodied impacts, such as hardware manufacture and facilities construction, can materially affect estimates of AI-related emissions. === Decisions and strategies by individual companies === Large technology companies have reported that the expansion of AI and cloud infrastructure affects their sustainability targets, electricity demand, and resource use. Google, for example, attributed part of its emissions growth in 2023 to increased data-centre energy consumption and supply-chain emissions in its 2024 environmental report. Cloud and AI companies have also announced measures intended to reduce environmental impacts, including investment in more efficient hardware, low-carbon electricity procurement, alternative cooling systems, and water stewardship programmes. The extent, comparability, and third-party verification of such disclosures vary between firms and jurisdictions. == Water usage == Data centres can use water directly for cooling and indirectly through the water used in electricity generation, depending on the local energy mix. Public reporting on data-centre water use has often been inconsistent, making comparisons between operators and regions difficult. To standardise operational reporting, The Green Grid proposed the metric water usage effectiveness (WUE), defined as annual site water use divided by IT equipment energy use. WUE does not by itself measure local water stress, source sustainability, or all upstream water impacts. Studies of AI water use also distinguish between water withdrawal and water consumption. Research on AI-specific water use has argued that the water footprint of AI systems can be difficult to observe and may vary substantially by location, cooling design, and electricity source. A 2025 Communications of the ACM article summarised methods for estimating AI water footprints and emphasised the distinction between water withdrawal and water consumption. Li and colleagues estimated that global AI water withdrawal could reach 4.2–6.6 billion cubic metres in 2027 under the scenarios examined in their article. Using GPT-3, released by OpenAI in 2020, as an example, they estimated that training the model in Microsoft's U.S. data centres could consume about 700,000 litres of onsite water and about 5.4 million litres in total when offsite electricity-related water use was included; they also estimated that 10–50 medium-length GPT-3 responses could consume about 500 mL of water, depending on when and where the model was deployed. Published prompt-level estimates have also varied by system and accounting framework: the 2025 Google study on Gemini assistant serving reported a median text-prompt estimate of about 0.26 mL under its framework. Location can materially affect the significance of data-centre water use. Research on U.S. data centres found that one-fifth of servers' direct water footprint came from moderately to highly water-stressed watersheds, while nearly half of servers were fully or partially powered by plants located in water-stressed regions. A 2025 Reuters report, citing data from Verisk Maplecroft and NatureFinance, said that an average mid-sized data centre uses about 1.4 million litres of water per day for cooling and that Phoenix would experience a 32% increase in annual water stress if currently pl

  Read more →
• 

  Chinchilla (language model)

  Chinchilla is a family of large language models (LLMs) developed by the research team at Google DeepMind, presented in March 2022. == Models == It is named "chinchilla" because it is a further development over a previous model family named Gopher. Both model families were trained in order to investigate the scaling laws of large language models. It claimed to outperform GPT-3. It considerably simplifies downstream utilization because it requires much less computer power for inference and fine-tuning. Based on the training of previously employed language models, it has been determined that if one doubles the model size, one must also have twice the number of training tokens. This hypothesis has been used to train Chinchilla by DeepMind. Similar to Gopher in terms of cost, Chinchilla has 70B parameters and four times as much data. Chinchilla has an average accuracy of 67.5% on the Measuring Massive Multitask Language Understanding (MMLU) benchmark, which is 7% higher than Gopher's performance. Chinchilla was still in the testing phase as of January 12, 2023. Chinchilla contributes to developing an effective training paradigm for large autoregressive language models with limited compute resources. The Chinchilla team recommends that the number of training tokens is twice for every model size doubling, meaning that using larger, higher-quality training datasets can lead to better results on downstream tasks. It has been used for the Flamingo vision-language model. == Architecture == Both the Gopher family and Chinchilla family are families of transformer models. In particular, they are essentially the same as GPT-2, with different sizes and minor modifications. Gopher family uses RMSNorm instead of LayerNorm; relative positional encoding rather than absolute positional encoding. The Chinchilla family is the same as the Gopher family, but trained with AdamW instead of Adam optimizer. The Gopher family contains six models of increasing size, from 44 million parameters to 280 billion parameters. They refer to the largest one as "Gopher" by default. Similar naming conventions apply for the Chinchilla family. Table 1 of shows the entire Gopher family: Table 4 of compares the 70-billion-parameter Chinchilla with Gopher 280B.

  Read more →
• 

  EXAPT

  EXAPT (a portmanteau of "Extended Subset of APT") is a production-oriented programming language that allows users to generate NC programs with control information for machining tools and facilitates decision-making for production-related issues that may arise during various machining processes. EXAPT was first developed to address industrial requirements. Through the years, the company created additional software for the manufacturing industry. Today, EXAPT offers a suite of SAAS products and services for the manufacturing industry. The trade name, EXAPT, is most commonly associated with the CAD/CAM-System, production data, and tool management software of the German company EXAPT Systemtechnik GmbH based in Aachen, DE. == General == EXAPT is a modularly built programming system for all NC machining operations as Drilling Turning Milling Turn-Milling Nibbling Flame-, laser-, plasma- and water jet cutting Wire eroding Operations with industrial robots Due to the modular structure, the main product groups, EXAPTcam and EXAPTpdo, are gradually expandable and permit individual software for the manufacturing industry used individually and also in a compound with an existing IT environment. == Functionality == EXAPTcam meets the requirements for NC planning, especially for the cutting operations such as turning, drilling, and milling up to 5-axis simultaneous machining. Thereby new process technologies, tool, and machine concepts are constantly involved. In the NC programming data from different sources such as 3D CAD models, drawings or tables can flow in. The possibilities of NC programming reaches from language-oriented to feature-oriented NC programming. The integrated EXAPT knowledge database and intelligent and scalable automatisms support the user. The EXAPT NC planning also covers the generation of production information as clamping and tool plans, presetting data or time calculations. The realistic simulation possibilities of NC planning and NC control data provide with production reliability. EXAPTpdo (EXAPT ProductionsDataOrganization) provides a neutrally applicable technology platform for the information compound of the NC planning - to the shop floor. This applies to all NC production data that are necessary for the set-up of NC machines, for the provision, presetting, and stocking of manufacturing resources and provided by EXAPTpdo in a central database. Besides classical functions of the tool management system (TMS) as the management of cutting tools, measuring, testing and clamping devices the technology data management and tool lifecycle management (TLM) is also included. System-supported "where-used lists" helps to handle the manufacturing resource cycle by secured requirement determination and requirement fulfillment. Unnecessary transports and unplanned dispositive adjustments are dropped, stocks are reduced, set-up times reduced and the throughput is increased. EXAPTpdo synchronizes involved systems within the value chain. Stock systems, MES systems or ERP systems (e.g. from the purchasing or production areas) do not work in isolation from each other but they interact with each other. EXAPTpdo provides the base to Smart Factory, for more flexibility in production and faster communication. == History == With the foundation of the EXAPT-Verein in 1967 as spin-off of the universities Aachen, Berlin and Stuttgart the further development "EXAPT (EXtended Subset of APT)" of the programming language "APT (Automatically Programmed Tool)" was focused and so the first milestone for the EXAPT history was set. In the same year the system EXAPT 1 for drilling and simple milling tasks became available. 1969 The industrial application of EXAPT 2 for the programming of NC machines with 2-axis linear and path control begins. In the following year, the development of the EXAPT modular system starts. 1972 BASIC-EXAPT is provided for the universal, homogeneous programming of all NC tasks. The support is made by the EXAPT applications consultancy. 1973 EXAPT 1.1 is provided for the programming of straight-cut and continuous-path controlled drilling and milling machines and machining centers. At the Hanover Fair (IHA 73) the interactive access to a mainframe via a time-sharing terminal for the part program entry and correction is presented and starts the replacement of the punch card. 1974 The possibilities for the use of process computers for the NC data transfer are leveled out. EXAPT offers the possibility of the result simulation when using plotters with display of tool paths and tools in assignment to the workpiece. In April 1975, the EXAPT NC Systemtechnik GmbH was founded with the aim, of enabling entry into the NC technique for small and medium-sized companies by a complete product and service program. In the following year, the system portfolio is extended with further system modules and service programs and the provision of postprocessors. 1978 The development activities on the EXAPT module system started in 1970 are completed. Using modern software techniques, the different system parts BASIC-EXAPT, EXAPT 1, EXAPT 1.1, and EXAPT 2 are composed of a total system. System support and applications consultancy become a new working focus. From the beginning to the middle of the 1980s Beside new portable software modules for CAD/CAM applications (e. g. CAPEX, NESTEX, CADEX, CADCPL), the first version of the EXAPT DNC system and extensions of the EXAPT NC programming system for the machining of sculptured surfaces are presented. 1988 EXAPT expands the software product range by systems for tool data management (BMO) and production data management (FDO). EXAPT trains more than 1,300 course participants including company-specific courses. 1992 The first version of the completely new product generation EXAPTplus is presented and the agency in Dresden is opened. 1993 The company name "EXAPT NC Systemtechnik GmbH" is changed to "EXAPT Systemtechnik GmbH." EXAPTplus is presented on PC under Windows NT at the EMO '93. The decentralization of the use of EXAPT systems expands the range of applications. In the following year, EXAPT-DNC is executable under Windows on a customary PC. Special hardware is not needed and so it can be used in compound with the database-supported EXAPT production data management system (FDO). 1995 EXAPTplus is also ready for complex application cases such as machining of tubes at extrusion tools. EXAPT-CADI provides the transfer of 2D CAD data to EXAPTplus. With the new office Gießen the marketing is strengthened. In the following year the EXAPT NC editor is developed for the direct processing of NC control data with tool path display and visualization of the tools. In the course of the market entry of more comfortable 3D CAD systems for the solid modelling of components a detailed evaluation of current systems is made in 1997. It is decided to use SolidWorks as a reference system for the solid-oriented NC planning with EXAPT. 1998 The first solution for the transfer of geometry data between SolidWorks and EXAPTplus is generated. The EXAPT organization systems are (beside SQL) also executable under Oracle now. The use of client server solutions supports the data flow in the production. 1999 AFR functions are provided in connection with EXAPTsolid to support a workpiece modelling for NC. The millennium capability is ensured for all EXAPT systems. AFR is a ground-breaking for the integration of third-party products. 2002 EXAPT-BMG is developed for the generation and visualization of tools with additional functions for the assembly from components. The acquisition of tools with their geometric and technological presentation offers extensive support of the NC planning with EXAPT systems. 2003 EXAPTpdo is available to optimize the process chains in production planning and production execution optimally regarding the increasing requirements of changing production conditions. 2004 Diverse system extensions are made in EXAPTplus, EXAPTsolid, EXAPT NC editor, EXAPTpdo for the complete machining on turning/milling centres with result reliability because of more extensive simulation based on realNC (Tecnomatix), for the use of new complex tool systems and the compound use between ERP systems as SAP and intelligent CNC systems. In the following year, EXAPTpdo is extended for the cross-order set-up optimization and provision of manufacturing re-sources especially for single and small series production with connection to purchase and physical portfolio management. 2006 The EXAPT systems are available for extended use as an information platform for production, the time management, and similar requirements. EXAPTsolid is extended for the feature-oriented milling operation and machine simulation. The NC programming of complex machine tools, e.g. three-turret-turning/milling centers is supported by EXAPT systems, as well as the use of multi-functional tools. 2007 A module for 3-5-axis simultaneous milling machining is presented.

  Read more →
• 

  DryvIQ

  DryvIQ is a software application that enables businesses to migrate on-site system files and associated data across storage and content management platforms, as well as create synchronized hybrid storage systems. == History == Before it was DryvIQ, the software SkySync was released in 2013 by Ann Arbor, Michigan based company, Portal Architects, Inc. The company created SkySync, a back-end, administrative application designed to transfer content across storage platforms, after abandoning 18 months of development on a desktop application called SkyBrary in 2011. Between 2014 and 2015, Portal Architects established partnerships with the following companies: Autodesk, Box, Dropbox, Egnyte, EMC, Google, Syncplicity, Huddle, IBM, Microsoft, OpenText, Oracle, Citrix ShareFile, Hightail and Internet2. SkySync (currently DryvIQ) was named a "Cool Vendor in Content Management" by Gartner in 2015. In 2022, SkySync changed its name to DryvIQ, which is now what the company is currently known as. == Overview == DryvIQ is a software application that syncs, migrates or backs up files including their associated properties, metadata, versions, user accounts and permissions across on-premises and Cloud-based storage platforms. The software deploys on a server, virtual machine or within Microsoft Azure, Amazon Web Services or other cloud computing services.

  Read more →
• 

  Application software

  Application software is software that is intended for end-user use – not operating, administering or programming a computer. It includes programs such as word processors, web browsers, media players, and mobile applications used in daily tasks. An application (app, application program, software application) is any program that can be categorized as application software. Application is a subjective classification that is often used to differentiate from system and utility software. Application software represents the user-facing layer of computing systems, designed to translate complex system capabilities into task-oriented, goal-driven workflows. Unlike system software, which focuses on hardware orchestration and resource management, application software is centered on problem abstraction, user interaction, and domain-specific functionality. The abbreviation app became popular with the 2008 introduction of the iOS App Store, to refer to applications for mobile devices such as smartphones and tablets. Later, with the release of the Mac App Store in 2010 and the Windows Store in 2011, it began to be used to refer to end-user software in general, regardless of platform. Applications may be bundled with the computer and its system software or published separately. Applications may be proprietary or open-source. == Terminology == === Meaning program and software === When used as an adjective, application can have a broader meaning than that described in this article. For example, concepts such as application programming interface (API), application server, application virtualization, application lifecycle management and portable application refer to programs and software in general. === Distinction between system and application software === The distinction between system and application software is subjective and has been the subject of controversy. For example, one of the key questions in the United States v. Microsoft Corp. antitrust trial was whether Microsoft's Internet Explorer web browser was part of its Windows operating system or a separate piece of application software. As another example, the GNU/Linux naming controversy is, in part, due to disagreement about the relationship between the Linux kernel and the operating systems built over this kernel. In some types of embedded systems, the application software and the operating system software may be indistinguishable by the user, as in the case of software used to control a VCR, DVD player, or microwave oven. The above definitions may exclude some applications that may exist on some computers in large organizations. For an alternative definition of an app: see Application Portfolio Management. === Killer application === A killer application (killer app, coined in the late 1980s) is an application that is so popular that it causes demand for its host platform to increase. For example, VisiCalc was the first modern spreadsheet software for the Apple II and helped sell the then-new personal computers into offices. For the BlackBerry, it was its email software. === Software suite === As software suite consists of multiple applications bundled together. They usually have related functions, features, and user interfaces, and may be able to interact with each other, e.g. open each other's files. Business applications often come in suites, e.g. Microsoft Office, LibreOffice and iWork, which bundle together a word processor, a spreadsheet, etc.; but suites exist for other purposes, e.g. graphics or music. == Ways to classify == As there so many applications and since their attributes vary so dramatically, there are many different ways to classify them. === By legal aspects === Proprietary software is protected under an exclusive copyright, and a software license grants limited usage rights. Such applications may allow add-ons from third parties. Free and open-source software (FOSS) can be run, distributed, sold, and extended for any purpose. FOSS software released under a free license may be perpetual and also royalty-free. Perhaps, the owner, the holder or third-party enforcer of any right (copyright, trademark, patent, or ius in re aliena) are entitled to add exceptions, limitations, time decays or expiring dates to the license terms of use. Public-domain software is a type of FOSS that is royalty-free and can be run, distributed, modified, reversed, republished, or created in derivative works without any copyright attribution and therefore revocation. It can even be sold, but without transferring the public domain property to other single subjects. Public-domain software can be released under a (un)licensing legal statement, which enforces those terms and conditions for an indefinite duration (for a lifetime, or forever). === By platform === An application can be categorized by the host platform on which it runs. Notable platforms include operating system (native), web browser, cloud computing and mobile. For example a web application runs in a web browser whereas a more traditional, native application runs in the environment of a computer's operating system. There has been a contentious debate regarding web applications replacing native applications for many purposes, especially on mobile devices such as smartphones and tablets. Web apps have indeed greatly increased in popularity for some uses, but the advantages of applications make them unlikely to disappear soon, if ever. Furthermore, the two can be complementary, and even integrated. === Horizontal vs. vertical === Application software can be seen as either horizontal or vertical. Horizontal applications are more popular and widespread, because they are general purpose, for example word processors or databases. Vertical applications are niche products, designed for a particular type of industry or business, or department within an organization. Integrated suites of software will try to handle every specific aspect possible of, for example, manufacturing or banking worker, accounting, or customer service. === By purpose === There are many types of application software: Enterprise Addresses the needs of an entire organization's processes and data flows, across several departments, often in a large distributed environment. Examples include enterprise resource planning systems, customer relationship management (CRM) systems, data replication engines, and supply chain management software. Departmental Software is a sub-type of enterprise software with a focus on smaller organizations or groups within a large organization. (Examples include travel expense management and IT Helpdesk.) Enterprise infrastructure Provides common capabilities needed to support enterprise software systems. (Examples include databases, email servers, and systems for managing networks and security.) Application platform as a service (aPaaS) A cloud computing service that offers development and deployment environments for application services. Knowledge worker Lets users create and manage information, often for and individual media editors may aid in multiple information worker tasks. Content access Used primarily to access content without editing, but may include software that allows for content editing. Such software addresses the needs of individuals and groups to consume digital entertainment and published digital content. (Examples include media players, web browsers, and help browsers.) Educational Related to content access software, but has the content or features adapted for use by educators or students. For example, it may deliver evaluations (tests), track progress through material, or include collaborative capabilities. Simulation Simulates physical or abstract systems for either research, training, or entertainment purposes. Media development Generates print and electronic media for others to consume, most often in a commercial or educational setting. This includes graphic-art software, desktop publishing software, multimedia development software, HTML editors, digital-animation editors, digital audio and video composition, and many others. Engineering Used in developing hardware and software products. This includes computer-aided design (CAD), computer-aided engineering (CAE), computer language editing and compiling tools, integrated development environments, and application programmer interfaces. Entertainment Refers to video games, screen savers, programs to display motion pictures or play recorded music, and other forms of entertainment which can be experienced through the use of a computing device. == Taxonomy == This section is a taxonomy of kinds of applications. This organization is but one of many different ways to organize them. A kind is included in only one category even if it logically fits in multiple. === General-purpose === Calculator Spreadsheet Web browser Web mapping E-commerce Social media === Communication === Chat Email Presentation software Phone Messages Networking software Web conferencing === Documentation === Desktop

  Read more →
• 

  Point-set registration

  In computer vision, pattern recognition, and robotics, point-set registration, also known as point-cloud registration or scan matching, is the process of finding a spatial transformation (e.g., scaling, rotation and translation) that aligns two point clouds. The purpose of finding such a transformation includes merging multiple data sets into a globally consistent model (or coordinate frame), and mapping a new measurement to a known data set to identify features or to estimate its pose. Raw 3D point cloud data are typically obtained from Lidars and RGB-D cameras. 3D point clouds can also be generated from computer vision algorithms such as triangulation, bundle adjustment, and more recently, monocular image depth estimation using deep learning. For 2D point set registration used in image processing and feature-based image registration, a point set may be 2D pixel coordinates obtained by feature extraction from an image, for example corner detection. Point cloud registration has extensive applications in autonomous driving, motion estimation and 3D reconstruction, object detection and pose estimation, robotic manipulation, simultaneous localization and mapping (SLAM), panorama stitching, virtual and augmented reality, and medical imaging. As a special case, registration of two point sets that only differ by a 3D rotation (i.e., there is no scaling and translation), is called the Wahba Problem and also related to the orthogonal procrustes problem. == Formulation == The problem may be summarized as follows: Let { M , S } {\displaystyle \lbrace {\mathcal {M}},{\mathcal {S}}\rbrace } be two finite size point sets in a finite-dimensional real vector space R d {\displaystyle \mathbb {R} ^{d}} , which contain M {\displaystyle M} and N {\displaystyle N} points respectively (e.g., d = 3 {\displaystyle d=3} recovers the typical case of when M {\displaystyle {\mathcal {M}}} and S {\displaystyle {\mathcal {S}}} are 3D point sets). The problem is to find a transformation to be applied to the moving "model" point set M {\displaystyle {\mathcal {M}}} such that the difference (typically defined in the sense of point-wise Euclidean distance) between M {\displaystyle {\mathcal {M}}} and the static "scene" set S {\displaystyle {\mathcal {S}}} is minimized. In other words, a mapping from R d {\displaystyle \mathbb {R} ^{d}} to R d {\displaystyle \mathbb {R} ^{d}} is desired which yields the best alignment between the transformed "model" set and the "scene" set. The mapping may consist of a rigid or non-rigid transformation. The transformation model may be written as T {\displaystyle T} , using which the transformed, registered model point set is: The output of a point set registration algorithm is therefore the optimal transformation T ⋆ {\displaystyle T^{\star }} such that M {\displaystyle {\mathcal {M}}} is best aligned to S {\displaystyle {\mathcal {S}}} , according to some defined notion of distance function dist ⁡ ( ⋅ , ⋅ ) {\displaystyle \operatorname {dist} (\cdot ,\cdot )} : where T {\displaystyle {\mathcal {T}}} is used to denote the set of all possible transformations that the optimization tries to search for. The most popular choice of the distance function is to take the square of the Euclidean distance for every pair of points: where ‖ ⋅ ‖ 2 {\displaystyle \|\cdot \|_{2}} denotes the vector 2-norm, s m {\displaystyle s_{m}} is the corresponding point in set S {\displaystyle {\mathcal {S}}} that attains the shortest distance to a given point m {\displaystyle m} in set M {\displaystyle {\mathcal {M}}} after transformation. Minimizing such a function in rigid registration is equivalent to solving a least squares problem. == Types of algorithms == When the correspondences (i.e., s m ↔ m {\displaystyle s_{m}\leftrightarrow m} ) are given before the optimization, for example, using feature matching techniques, then the optimization only needs to estimate the transformation. This type of registration is called correspondence-based registration. On the other hand, if the correspondences are unknown, then the optimization is required to jointly find out the correspondences and transformation together. This type of registration is called simultaneous pose and correspondence registration. === Rigid registration === Given two point sets, rigid registration yields a rigid transformation which maps one point set to the other. A rigid transformation is defined as a transformation that does not change the distance between any two points. Typically such a transformation consists of translation and rotation. In rare cases, the point set may also be mirrored. In robotics and computer vision, rigid registration has the most applications. === Non-rigid registration === Given two point sets, non-rigid registration yields a non-rigid transformation which maps one point set to the other. Non-rigid transformations include affine transformations such as scaling and shear mapping. However, in the context of point set registration, non-rigid registration typically involves nonlinear transformation. If the eigenmodes of variation of the point set are known, the nonlinear transformation may be parametrized by the eigenvalues. A nonlinear transformation may also be parametrized as a thin plate spline. === Other types === Some approaches to point set registration use algorithms that solve the more general graph matching problem. However, the computational complexity of such methods tend to be high and they are limited to rigid registrations. In this article, we will only consider algorithms for rigid registration, where the transformation is assumed to contain 3D rotations and translations (possibly also including a uniform scaling). The PCL (Point Cloud Library) is an open-source framework for n-dimensional point cloud and 3D geometry processing. It includes several point registration algorithms. == Correspondence-based registration == Correspondence-based methods assume the putative correspondences m ↔ s m {\displaystyle m\leftrightarrow s_{m}} are given for every point m ∈ M {\displaystyle m\in {\mathcal {M}}} . Therefore, we arrive at a setting where both point sets M {\displaystyle {\mathcal {M}}} and S {\displaystyle {\mathcal {S}}} have N {\displaystyle N} points and the correspondences m i ↔ s i , i = 1 , … , N {\displaystyle m_{i}\leftrightarrow s_{i},i=1,\dots ,N} are given. === Outlier-free registration === In the simplest case, one can assume that all the correspondences are correct, meaning that the points m i , s i ∈ R 3 {\displaystyle m_{i},s_{i}\in \mathbb {R} ^{3}} are generated as follows:where l > 0 {\displaystyle l>0} is a uniform scaling factor (in many cases l = 1 {\displaystyle l=1} is assumed), R ∈ SO ( 3 ) {\displaystyle R\in {\text{SO}}(3)} is a proper 3D rotation matrix ( SO ( d ) {\displaystyle {\text{SO}}(d)} is the special orthogonal group of degree d {\displaystyle d} ), t ∈ R 3 {\displaystyle t\in \mathbb {R} ^{3}} is a 3D translation vector and ϵ i ∈ R 3 {\displaystyle \epsilon _{i}\in \mathbb {R} ^{3}} models the unknown additive noise (e.g., Gaussian noise). Specifically, if the noise ϵ i {\displaystyle \epsilon _{i}} is assumed to follow a zero-mean isotropic Gaussian distribution with standard deviation σ i {\displaystyle \sigma _{i}} , i.e., ϵ i ∼ N ( 0 , σ i 2 I 3 ) {\displaystyle \epsilon _{i}\sim {\mathcal {N}}(0,\sigma _{i}^{2}I_{3})} , then the following optimization can be shown to yield the maximum likelihood estimate for the unknown scale, rotation and translation:Note that when the scaling factor is 1 and the translation vector is zero, then the optimization recovers the formulation of the Wahba problem. Despite the non-convexity of the optimization (cb.2) due to non-convexity of the set SO ( 3 ) {\displaystyle {\text{SO}}(3)} , seminal work by Berthold K.P. Horn showed that (cb.2) actually admits a closed-form solution, by decoupling the estimation of scale, rotation and translation. Similar results were discovered by Arun et al. In addition, in order to find a unique transformation ( l , R , t ) {\displaystyle (l,R,t)} , at least N = 3 {\displaystyle N=3} non-collinear points in each point set are required. More recently, Briales and Gonzalez-Jimenez have developed a semidefinite relaxation using Lagrangian duality, for the case where the model set M {\displaystyle {\mathcal {M}}} contains different 3D primitives such as points, lines and planes (which is the case when the model M {\displaystyle {\mathcal {M}}} is a 3D mesh). Interestingly, the semidefinite relaxation is empirically tight, i.e., a certifiably globally optimal solution can be extracted from the solution of the semidefinite relaxation. === Robust registration === The least squares formulation (cb.2) is known to perform arbitrarily badly in the presence of outliers. An outlier correspondence is a pair of measurements s i ↔ m i {\displaystyle s_{i}\leftrightarrow m_{i}} that departs from the generative model (cb.1). In this case, one can consider a differen

  Read more →
• 

  Logical Machine Corporation

  Logical Machine Corporation (LOMAC) was an American computer company active from the mid-1970s to the 1980s and based in the San Francisco Bay Area. It was founded as John Peers and Company by the British entrepreneur John Peers in 1974. LOMAC developed the ADAM, a minicomputer which ran a specialized compiler for the company's natural English programming language. Throughout the late 1970s, the company acquired several technology firms, including Byte, Inc., the owner of the Byte Shop retail chain. Despite its unique approach to computing and earning $5 million in revenue in 1977, LOMAC struggled as the industry began to standardize around the IBM Personal Computer (IBM PC). Following Peers's departure in 1980, the company rebranded as Logical Business Machines, Inc. (LBM, or simply Logical), and attempted to pivot toward IBM PC–compatible hardware. However, financial difficulties led to the company filing for Chapter 11 bankruptcy in 1984. After emerging from bankruptcy in 1985 with new investment, Logical ceased hardware manufacturing to focus exclusively on software development and value-added reselling. == History == John Peers (born 1942) founded Logical Machine Corporation as John Peers and Company in September 1974. The company originally occupied a 4,500-square-foot office in Burlingame, California. The company was Peers' fourth; he had recently sold off Allied Business Systems of London to Trafalgar House in 1974. Peers sought to set up manufacturing in an agricultural zone in Ukiah, California. Following a delay, caused in part by concerned residents, a 30,000-square-foot plant was raised in Burke Hill, three miles south of Ukiah. The Ukiah plant was built to mass manufacture the company's ADAM minicomputer. The ADAM computer ran a specialized compiler for the company's natural English programming language; that is to say, the programming language attempted to closely emulate English syntax. Prototypes of the ADAM were built in May 1974, based on specifications devised in October 1973. Peers had yet to patent the technology as of June 1975. The ADAM's central processing unit was bolted onto an 7-by-6-foot L-shaped desk, on which rested its terminal. Twenty units of the ADAM were installed between April 1975 and February 1976, out of a backlog of orders for 3,500 from 500 clients, manufactured out of the company's Burlingame headquarters. It cost US$40,000. A controversial print advertisement featuring a naked woman seated at an ADAM terminal—as a pastiche of Adam and Eve—was recalled in early 1976 as a result of outcry from the National Organization for Women. The company changed its name to Logical Machine Corporation (LOMAC) in October 1976 and moved its headquarters to a 26,000-square-foot building in Sunnyvale, California, in anticipation of a ramping up of orders for the ADAM. The company originally occupied half of the building; they later purchased the other half from the tenant in July 1977 to double its manufacturing output. For fiscal year 1977, the company earned $5 million in revenue. In December 1977, LOMAC acquired Byte, Inc.—the proprietor of The Byte Shop, the first computer retail chain—from Paul Terrell and Boyd Wilson for an unspecified amount. The Byte Shop had 65 locations in the San Francisco Bay Area in 1978; it catered mainly to hobbyists with low cost microcomputer kits, in contrast to the high cost of LOMAC's ADAM. By July 1978, however, LOMAC were able to reduce the price of the ADAM down to $15,000. The company by that point had shipped their 50th ADAM and expanded to 14 countries. Also in 1978, LOMAC acquired Mass Memory—a high-tech optical storage company based in Phoenix, Arizona, whose products had storage capacities on the order gigabytes and terabytes—and Centigram, makers of the Mike—a computer with speech recognition. Later that year, the company introduced Tina, a low-cost version of the ADAM. LOMAC suffered losses that year and appointed Jerry Brandt to the board of directions, naming him chief operating officer, in August 1978. Brandt had Logical absorb Mass Memory and Centigram into the parent operations, shutting down their respective plants in the process, converted 10 Byte Shops to franchises and opened 25 more franchised Byte locations, and stopped direct sales of LOMAC's business computer products. By the beginning of 1979, LOMAC was profitable once more, and Brandt was let go from LOMAC. Peers left LOMAC in 1980, following a slump in the company's sales. He became an executive director of the United States Robotics Society, a consortium for industrial automation companies, that year. Following Peers' departure, LOMAC changed its name to Logical Business Machines, adopting the name of its European subsidiary. In 1983, the company announced a 16-bit clone of the IBM PC, called the Logical L-XT, which featured a 10-MB hard drive, 320-KB floppy drive and 192 KB of RAM, and a real-time clock, and came shipped with various software (including MS-DOS, a word processor, and a spreadsheet application) and an amber CRT monitor. The following year, the company introduced L-NET, a local area network system based on the L-XT that could link up to 64 computers. L-NET came shipped with a natural programming language, Diplomat—a descendant of the programming language used on the ADAM. In June 1983, Logical sued Coleco Industries over trademark infringement with the latter's to-be-released Adam microcomputer. Logical cited confusion from their existing ADAM customer base caused by the announcement of the Coleco Adam as the basis for the suit. Coleco challenged Logical in the press, writing that Logical's rights to the Adam trademark for use in computers had lapsed earlier in the year. The two settled out of court, with Coleco agreeing to license the Adam name from Logical in exchange for unlimited rights to the Adam trademark. Logical halted development of the L-XT when they filed for Chapter 11 bankruptcy in July 1984. The company had been $4 million in debt. They emerged from bankruptcy in September 1985, after being infused with $2 million from Carat Ltd. The latter immediately received a little less than 50 percent ownership in Logical—this stake set to grow to over 50 percent over the next six months. As part of the terms of exiting bankruptcy, Logical stopped manufacturing hardware and strictly became a software development company and value-added reseller of computer systems.

  Read more →