AI For Business Cards

AI For Business Cards — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Psychology in cybersecurity

The psychology of cybersecurity (often intersecting with usable security and cyberpsychology) is an interdisciplinary field studying how human behavior, cognitive biases, and social dynamics influence information security. While traditional cybersecurity focuses on hardware and software vulnerabilities, this discipline addresses the "human factor," which is exploited in cyberattacks. Psychology in cybersecurity draws from cognitive psychology and human–computer interaction. == History and evolution == The challenge of human behavior in computing was noted as early as the 1960s with multi-user mainframes like the Compatible Time-Sharing System (CTSS). In 1966, a software error on CTSS caused the system's master password file to be displayed to every user upon login—one of the earliest documented security incidents attributable to a combination of system design and human factors. These behaviors gained broader significance in the 1990s as the Internet became widely accessible. High-profile incidents involving figures like Kevin Mitnick demonstrated how human trust could be exploited through social engineering such as pretexting over the phone. == Cognitive and behavioral factors == Much of the psychology of cybersecurity focuses on decision-making under stress or uncertainty. Researchers apply frameworks like dual process theory to explain why humans fall for phishing or business email compromise. Threat actors design malicious communications to trigger fast, emotional "System 1" thinking—using urgency, authority, or panic, which prompts users to click a link or wire funds before their analytical "System 2" can assess the situation's legitimacy. Industry research has consistently documented the effectiveness of these techniques at scale, pointing to several recurring psychological phenomena that influence daily security practices: Cognitive biases: The optimism bias leads users to believe they are unlikely to be targeted by cybercriminals, resulting in lax password practices or delayed software updates. The availability heuristic causes individuals to focus on highly publicized, sophisticated threats while ignoring common, statistically probable risks like credential reuse. Social influence: Attackers leverage established principles of persuasion, such as those categorized by Robert Cialdini. Impersonating a CEO leverages the psychological trigger of authority, while fake tech support scams use reciprocity (offering to fix a problem before asking for network credentials). == Neurological and pre-cognitive factors == Functional magnetic resonance imaging (fMRI) studies show that neural activation in visual and attentional regions decreases with repeated exposure to the same stimulus, a phenomenon termed repetition suppression. Experiments have confirmed this effect in the context of security warnings: static warning designs produce declines in user attention and adherence. Information processing research on phishing indicates that affective cues, such as artificial urgency or fear, increase cognitive load and elicit automatic heuristic processing, reducing the likelihood of analytical evaluation and facilitating compliance with malicious requests. == Security fatigue and organizational dynamics == Aggressive cybersecurity postures can sometimes lead to mental and emotional exhaustion, a phenomenon known as security fatigue. === Alert fatigue === One example is alert fatigue, which most frequently affects both end-users and security operations center analysts. Continuous exposure to browser warnings or antivirus pop-ups, particularly those that are false positives, conditions users to dismiss alerts automatically due to the volume of notifications rather than their repetitive appearance (see § Neurological and pre-cognitive factors). The scale of this problem is significant in enterprise: SOC teams in large organizations receive thousands of alerts daily, and a survey published in ACM Computer Surveys found that analysts spend over 25% of their time handling false positives, meaning that malicious indicators can be buried in the noise. === Password fatigue === Similarly, password fatigue is the feeling experienced by many people who are required to remember an excessive number of passwords as part of their daily routine, such as to log in to a computer at work. Users cope with the memory burden by making predictable, iterative changes to their passwords (such as updating "Password01!" to "Password02!"), which decreases password security.
Read more →
Artificial intelligence industry in Italy

The artificial intelligence industry in Italy is growing and supports industrial development. In 2024 it reached a new record, reaching 1.2 billion euros with a growth of +58% compared to 2023. While in 2025, the growth of artificial intelligence in the industrial application was even greater than in 2024 both in terms of value and application to industrial sectors. == History == The roots of AI research in Italy extend back to the 1970s, when Italian scholars began exploring automated reasoning, programming language semantics, and pattern recognition. Researchers such as those involved in early projects at the National Research Council and various universities laid the groundwork for subsequent academic and industrial developments in the field. During this period, the focus was predominantly on developing algorithms for automated theorem proving and building systems to reason about complex mathematical problems. This era witnessed the birth of methodologies that would later influence numerous AI subfields, from natural language processing (NLP) to robotics. === Institutional milestones and academic contributions === A turning point in the Italian AI landscape was the formation of the Italian Association for Artificial Intelligence (AIxIA) in 1988. Founded by academics, including Luigia Carlucci Aiello, the association established a platform for collaboration between universities, research centers, and industry. Led by Aiello, AIIA played a role in promoting research, organizing national conferences, and fostering international partnerships that connected Italy's AI community to global networks. At the same time, professors such as Roberto Navigli and numerous practitioners contributed to the advancement of AI in Italy. Navigli has worked in multilingual NLP, including the creation of BabelNet, and led the Minerva project. === Industrial AI === Over recent decades, numerous national and European initiatives supported by funding from programs such as the National Recovery and Resilience Plan (PNRR) have spurred the transition from theoretical research to practical applications. Industrial sectors including manufacturing, banking, and healthcare increasingly embraced AI-driven automation, while research institutions collaborated with industrial partners to deploy cutting-edge solutions. In recent years, Italy has also seen the establishment of specialized research centers and institutes aimed at bridging the gap between academic innovation and industrial application. These initiatives indicate a broader national commitment to integrating AI into the fabric of Italian industry. == Recent developments == === Emergence of generative AI === A landmark in Italy's modern AI evolution is the development of Minerva AI. Developed by the Sapienza NLP research group at Sapienza University of Rome and led by Professor Roberto Navigli, Minerva represents the first family of large language models (LLMs) trained from scratch with a primary focus on the Italian language. ==== Minerva 7B ==== The latest iteration, Minerva 7B, has 7 billion parameters and has been trained on an extensive corpus of over 1.5 trillion words. By using advanced instruction tuning techniques, Minerva 7B is able to produce highly accurate, coherent, and contextually sensitive responses addressing common issues such as hallucinations and inappropriate content generation. This breakthrough sets a benchmark for transparent, open-source AI development in the country. Minerva's development, carried out within the FAIR (Future Artificial Intelligence Research) project in collaboration with CINECA and supported by supercomputing resources like the Leonardo (supercomputer), aligns closely with Italy's cultural and linguistic heritage. === Establishment of AI4I === The recent establishment of the Istituto Italiano per l’Intelligenza Artificiale (AI4I) is part of Italy's strategy to improve its industrial competitiveness in AI. This dedicated institute aims to bridge the gap between research institutions and industrial enterprises; promote training and R&D support to nurture the next generation of Italian AI experts; and enhance national competitiveness. This initiative is expected to serve as a hub for applied AI research, driving innovations that are tailored to the specific needs of Italian industry and public administration. === Benefits of InvestAI === Italy's AI industry stands to benefit from the European InvestAI initiative, a plan unveiled at the recent AI Action Summit in Paris. InvestAI is an effort by the European Commission to mobilize €200 billion for AI investments, with a dedicated €20 billion fund earmarked for building AI gigafactories. These gigafactories are planned as large-scale hubs for training advanced, complex AI models using approximately 100,000 last-generation AI chips. For Italy, this investment presents several major opportunities: Access to State-of-the-Art Infrastructure: Italian companies, research institutions, and start-ups can leverage the gigafactories’ immense computational resources, enabling them to train highly sophisticated language models and other AI systems. Enhanced Competitiveness and Collaboration: With InvestAI's layered funding model where EU funds help de-risk private investments Italian firms can access capital more readily. This will bolster public–private partnerships and create a more dynamic AI ecosystem that spans from academic research to industrial applications. Alignment with National and Regional Initiatives: The Istituto Italiano per l’Intelligenza Artificiale (AI4I), based in Turin, is already recognized as a strategic asset by both Italy and the European Union. As the main recipient of InvestAI funds in Italy, AI4I will play a pivotal role in implementing these investments locally, fostering innovation in sectors like manufacturing, healthcare and aerospace. Commission President Ursula von der Leyen emphasized that InvestAI is designed to democratize AI innovation throughout Europe by ensuring that even smaller companies have access to high-performance computing power. For Italy, this means not only keeping pace with global leaders but also harnessing European-scale investments to transform its AI industry and drive economic growth.
Read more →
Information history

Information history may refer to the history of each of the categories listed below (or to combinations of them). It should be recognized that the understanding of, for example, libraries as information systems only goes back to about 1950. The application of the term information for earlier systems or societies is a retronym. == Academic discipline == Information history is an emerging discipline related to, but broader than, library history. An important introduction and review was made by Alistair Black (2006). A prolific scholar in this field is also Toni Weller, for example, Weller (2007, 2008, 2010a and 2010b). As part of her work Toni Weller has argued that there are important links between the modern information age and its historical precedents. A description from Russia is Volodin (2000). Alistair Black (2006, p. 445) wrote: "This chapter explores issues of discipline definition and legitimacy by segmenting information history into its various components: The history of print and written culture, including relatively long-established areas such as the histories of libraries and librarianship, book history, publishing history, and the history of reading. The history of more recent information disciplines and practice, that is to say, the history of information management, information systems, and information science. The history of contiguous areas, such as the history of the information society and information infrastructure, necessarily enveloping communication history (including telecommunications history) and the history of information policy. The history of information as social history, with emphasis on the importance of informal information networks." "Bodies influential in the field include the American Library Association’s Round Table on Library History, the Library History Section of the International Federation of Library Associations and Institutions (IFLA), and, in the U.K., the Library and Information History Group of the Chartered Institute of Library and Information Professionals (CILIP). Each of these bodies has been busy in recent years, running conferences and seminars, and initiating scholarly projects. Active library history groups function in many other countries, including Germany (The Wolfenbuttel Round Table on Library History, the History of the Book and the History of Media, located at the Herzog August Bibliothek), Denmark (The Danish Society for Library History, located at the Royal School of Library and Information Science), Finland (The Library History Research Group, University of Tamepere), and Norway (The Norwegian Society for Book and Library History). Sweden has no official group dedicated to the subject, but interest is generated by the existence of a museum of librarianship in Bods, established by the Library Museum Society and directed by Magnus Torstensson. Activity in Argentina, where, as in Europe and the U.S., a "new library history" has developed, is described by Parada (2004)." (Black (2006, p. 447). === Journals === Information & Culture (previously Libraries & the Cultural Record, Libraries & Culture) Library & Information History (until 2008: Library History; until 1967: Library Association. Library History Group. Newsletter) == Information technology (IT) == The term IT is ambiguous although mostly synonym with computer technology. Haigh (2011, pp. 432-433) wrote "In fact, the great majority of references to information technology have always been concerned with computers, although the exact meaning has shifted over time (Kline, 2006). The phrase received its first prominent usage in a Harvard Business Review article (Haigh, 2001b; Leavitt & Whisler, 1958) intended to promote a technocratic vision for the future of business management. Its initial definition was at the conjunction of computers, operations research methods, and simulation techniques. Having failed initially to gain much traction (unlike related terms of a similar vintage such as information systems, information processing, and information science) it was revived in policy and economic circles in the 1970s with a new meaning. Information technology now described the expected convergence of the computing, media, and telecommunications industries (and their technologies), understood within the broader context of a wave of enthusiasm for the computer revolution, post-industrial society, information society (Webster, 1995), and other fashionable expressions of the belief that new electronic technologies were bringing a profound rupture with the past. As it spread broadly during the 1980s, IT increasingly lost its association with communications (and, alas, any vestigial connection to the idea of anybody actually being informed of anything) to become a new and more pretentious way of saying "computer". The final step in this process is the recent surge in references to "information and communication technologies" or ICTs, a coinage that makes sense only if one assumes that a technology can inform without communicating". Some people use the term information technology about technologies used before the development of the computer. This is however to use the term as a retronym. =
Read more →
Pointer algorithm

In computer science, a pointer algorithm (sometimes called a pointer machine, or a reference machine; see the article Pointer machine for a close but non-identical concept) is a type of algorithm that manages a linked data structure. This concept is used as a model for lower-bound proofs and specific restrictions on the linked data structure and on the algorithm's access to the structure vary. This model has been used extensively with problems related to the disjoint-set data structure. Thus, Tarjan and La Poutré used this model to prove lower bounds on the amortized complexity of a disjoint-set data structure (La Poutré also addressed the interval split-find problem). Blum used this model to prove a lower bound on the single operation worst-case time of disjoint set data structure. Blum and Rochow proved a worst-case lower bound for the interval union-find problem. == Example == In Tarjan's lower bound for the disjoint set union problem, the assumptions on the algorithm are: The algorithm maintains a linked structure of nodes. Each element of the problem is associated with a node. Each set is represented by a node. The nodes of each set constitute a distinct connected component in the structure (this property is called separability). The find operation is performed by following links from the element node to the set node. Under these assumptions, the lower bound of Ω ( m α ( m , n ) ) {\displaystyle \Omega (m\alpha (m,n))} on the cost of a sequence of m operations is proven.
Read more →
Text Database and Dictionary of Classic Mayan

The project Text Database and Dictionary of Classic Mayan (abbr. TWKM) promotes research on the writing and language of pre-Hispanic Maya culture. It is housed in the Faculty of Arts at the University of Bonn and was established with funding from the North Rhine-Westphalian Academy of Sciences, Humanities and the Arts. The project has a projected run-time of fifteen years and is directed by Nikolai Grube from the Department of Anthropology of the Americas at the University of Bonn. The goal of the project is to conduct computer-based studies of all extant Maya hieroglyphic texts from an epigraphic and cultural-historical standpoint, and to produce and publish a database and a comprehensive dictionary of the Classic Mayan language. == Subject of the Project == The text database, as well as the dictionary that will be compiled by the conclusion of the project, will be assembled based on all known texts from the pre-Hispanic Maya culture. These texts were produced and used between approximately the third century B.C. through A.D. 1500, in a region that today includes parts of the countries of Mexico, Guatemala, Belize, and Honduras. The thousands of hieroglyphic inscriptions on monuments, ceramics, or daily objects that have survived into the present offer insight into the language's vocabulary and structure. The project's database and dictionary will digitally represent original spellings using the logo-syllabic Maya hieroglyphs, as well as their transcription and transliteration in the Roman alphabet. The data will be additionally annotated with various epigraphic analyses, translations, and further object-specific information. == Project Partners == TWKM will employ digital technologies in order to compile and make available the data and metadata, as well as to publish the project's research results. The project thereby methodologically positions itself in the field of the digital humanities. The project will be conducted in cooperation with the project partners (below), the research association for the eHumanities TextGrid, as well as the University and Regional Library of Bonn (ULB). The working environment that is currently under construction, in which the data and metadata will be compiled and annotated, will be realized in theTextGrid Laboratory, a software of the virtual research environment. A further component of this software, the TextGrid Repository, will make the data that are authorized for publication freely available online and ensure their long-term storage. The tools for data compilation and annotation attained from the modularly constructed and extended TextGrid lab thereby provide all the necessary materials for facilitating the research team's the typical epigraphic workflow. The workflow usually begins by documenting the texts and the objects on which they are preserved, and by compiling descriptive data. It then continues with the various levels of epigraphic and linguistic analysis, and concludes in the best case scenario with a translation of the analyzed inscription and a corresponding publication. In cooperation with the ULB, selected data will additionally be made available. The project's Virtual Inscription Archive will present online, in the Digital Collections of the ULB, hieroglyphic inscriptions selected from the published data in the repository, including an image of and brief information about the texts and the objects on which they are written, epigraphic analysis, and translation. == Project Goal == One of the project's goals is to produce a dictionary of Classic Mayan, in both digital and print form, towards the end of the project run-time. Additionally, a database with a corpus of inscriptions, including their translations and epigraphic analyses, will be made freely available online. The database furthermore will provide an ontology-like link of the contextual object data with the inscriptions and with each other, thereby allowing a cultural-historical arrangement of all contents within the periods of pre-Hispanic Maya culture. The contents of the database are additionally linked to citations of relevant literature. As a result, the database will also make freely available to both the scientific community and other interested parties a bibliography representing the research history and a base of knowledge concerning ancient Maya culture and script. In addition, the Classic Maya script, in its temporally defined stages of language development, will be gathered into and documented in a comprehensive language corpus with the aid of the information gathered by the project. In collaboration with all project participants, the corpus data can be used, together with the aid of various comparable analyses and also computational linguistic methods, such as inference-based methods, to confirm readings of some hieroglyphs that are currently only partially confirmed, and to eventually completely decipher the Classic Maya script.
Read more →
Materials informatics

Materials informatics is a field of study that applies the principles of informatics and data science to materials science and engineering to improve the understanding, use, selection, development, and discovery of materials. The term "materials informatics" is frequently used interchangeably with "data science", "machine learning", and "artificial intelligence" by the community. This is an emerging field, with a goal to achieve high-speed and robust acquisition, management, analysis, and dissemination of diverse materials data with the goal of greatly reducing the time and risk required to develop, produce, and deploy new materials, which generally takes longer than 20 years. This field of endeavor is not limited to some traditional understandings of the relationship between materials and information. Some more narrow interpretations include combinatorial chemistry, process modeling, materials databases, materials data management, and product life cycle management. Materials informatics is at the convergence of these concepts, but also transcends them and has the potential to achieve greater insights and deeper understanding by applying lessons learned from data gathered on one type of material to others. By gathering appropriate meta data, the value of each individual data point can be greatly expanded. == Databases == Databases are essential for any informatics research and applications. In material informatics many databases exist containing both empirical data obtained experimentally, and theoretical data obtained computationally. Big data that can be used for machine learning is particularly difficult to obtain for experimental data due to the lack of a standard for reporting data and the variability in the experimental environment. This lack of big data has led to growing effort in developing machine learning techniques that utilize data extremely data sets. On the other hand, large uniform database of theoretical density functional theory (DFT) calculations exists. These databases have proven their utility in high-throughput material screening and discovery. Some common DFT databases and high throughput tools are listed below: Databases: MaterialsProject.org, MaterialsWeb.org (University of Florida) HT software: Pymatgen, MPInterfaces, Matminer == Beyond computational methods? == The concept of materials informatics is addressed by the Materials Research Society. For example, materials informatics was the theme of the December 2006 issue of the MRS Bulletin. The issue was guest-edited by John Rodgers of Innovative Materials, Inc., and David Cebon of Cambridge University, who described the "high payoff for developing methodologies that will accelerate the insertion of materials, thereby saving millions of investment dollars." The editors focused on the limited definition of materials informatics as primarily focused on computational methods to process and interpret data. They stated that "specialized informatics tools for data capture, management, analysis, and dissemination" and "advances in computing power, coupled with computational modeling and simulation and materials properties databases" will enable such accelerated insertion of materials. A broader definition of materials informatics goes beyond the use of computational methods to carry out the same experimentation, viewing materials informatics as a framework in which a measurement or computation is one step in an information-based learning process that uses the power of a collective to achieve greater efficiency in exploration. When properly organized, this framework crosses materials boundaries to uncover fundamental knowledge of the basis of physical, mechanical, and engineering properties. == Challenges == While there are many who believe in the future of informatics in the materials development and scaling process, many challenges remain. Hill, et al., write that "Today, the materials community faces serious challenges to bringing about this data-accelerated research paradigm, including diversity of research areas within materials, lack of data standards, and missing incentives for sharing, among others. Nonetheless, the landscape is rapidly changing in ways that should benefit the entire materials research enterprise." This remaining tension between traditional materials development methodologies and the use of more computationally, machine learning, and analytics approaches will likely exist for some time as the materials industry overcomes some of the cultural barriers necessary to fully embrace such new ways of thinking. == Analogy from Biology == The overarching goals of bioinformatics and systems biology may provide a useful analogy. Andrew Murray of Harvard University expresses the hope that such an approach "will save us from the era of "one graduate student, one gene, one PhD". Similarly, the goal of materials informatics is to save us from one graduate student, one alloy, one PhD. Such goals will require more sophisticated strategies and research paradigms than applying data-science methods to the same tasks set currently undertaken by students.
Read more →
Quality of Data

Quality of Data (QoD) is a designation coined by L. Veiga, that specifies and describes the required Quality of Service of a distributed storage system from the Consistency point of view of its data. It can be used to support big data management frameworks, Workflow management, and HPC systems (mainly for data replication and consistency). It takes into account data semantics, namely the Time interval of data freshness, the Sequence of tolerable number of outstanding versions of the data read before ore refresh, and the Value divergence allowed before displaying it. Initially it was based on a model from an existing research work regarding vector-field Consistency, awarded the best-paper prize in the ACM/IFIP/Usenix Middleware Conference 2007 and later enhanced for increased scalability and fault-tolerance. This consistency model has been successfully applied and proven in big data key/value store Apache HBase, initially designed as a middleware module seating between clusters from separate data centres. The HBase-QoD coupling minimises bandwidth usage and optimises resources allocation during replication achieving the desired consistency level at a more fine-grained level. QoD is defined by the three-dimensions of vector k=(θ,σ,ν), but with a broader view of the issue, applicable also to large-scale data management techniques in regards to their timely delivery. == Other descriptions == Quality of Data should not be confused with other definitions for data quality such as completeness, validity, and accuracy.
Read more →
Run-to-completion scheduling

Run-to-completion scheduling or nonpreemptive scheduling is a scheduling model in which each task runs until it either finishes, or explicitly yields control back to the scheduler. Run-to-completion systems typically have an event queue which is serviced either in strict order of admission by an event loop, or by an admission scheduler which is capable of scheduling events out of order, based on other constraints such as deadlines. Some preemptive multitasking scheduling systems behave as run-to-completion schedulers in regard to scheduling tasks at one particular process priority level, at the same time as those processes still preempt other lower priority tasks and are themselves preempted by higher priority tasks.
Read more →
Alerts.in.ua

alerts.in.ua is an online service that visualizes information about air alerts and other threats on the map of Ukraine. == History == The idea of the site appeared in the first weeks of the 2022 Russian invasion of Ukraine, during the development of other projects related to alerting the population about alarms. So, on March 2, 2022, the "Lviv Siren" bot was created, which reported on air alarms in Lviv on Twitter. Later, the idea arose to monitor alarms all over Ukraine and display them on a map. However, the lack of a single official source reporting alarms made this task much more difficult. On March 15, 2022, the Ajax Systems company announced the creation of the official Telegram channel "Air Alarm". This channel receives signals from the "Air Alarm" application and instantly publishes messages about the start and end of alarms in different regions of Ukraine. This immediately solved the problem with the source of information and gave impetus to the further implementation of the project. On March 22, 2022, the first version of the "Air Alarm Map" website was published, located on the war.ukrzen.in.ua domain. The map quickly gained popularity in social networks. It, like several other similar projects, began to be widely distributed by the mass media: Suspilne, Novyi Kanal, UNIAN, DW, Fakty ICTV, Vikna TV, Ukrainian Radio, STB, Espresso, dev.ua, itc.ua and state bodies: Center for Countering Disinformation at the National Security and Defense Council of Ukraine, Verkhovna Rada of Ukraine, Khmelnytska OVA, etc. On April 8, 2022, the site moved to the alerts.in.ua domain, where it is still available today. On August 25, 2022, the service began monitoring local official channels in addition to the main "Air Alarm". On September 11, 2022, the English version of the site was published. On March 22, 2023, its own Android application was published. The project is actively developing and has its own community. == Description == The main part of the site is a map of Ukraine, on which the regions where an air alert or other threats have been declared are highlighted in real time. As of October 16, 2022, 5 types of threats are supported: Air alarm. The threat of artillery fire. The threat of street fighting. Chemical threat. Nuclear threat. Additionally, based on media reports, information is published about other dangerous events, such as explosions, demining, etc. On the site, you can view the history of announced alarms with links to sources. Alarm statistics for different time periods are also available. For developers, there is an API that allows you to develop your own services based on information about declared alarms. The site is available in Ukrainian, English, Polish and Japanese. == Use == The map is used by: To monitor the situation in the country and the region. To illustrate the alarms announced in the mass media: TSN, Ukrainian truth, Channel 24, Suspilne, RBC Ukraine, Gromadske, Glavkom. As a map of alarms in mobile applications, there is Alarm and AirAlert. As an API for its services, including alternative alarm maps, Telegram, Viber channels, Discord bots, IoT projects, etc. == Statistics == 89.5% of users use the map from a mobile phone, 10% from a PC and 1% from a tablet. Top 6 countries by visit: Ukraine, United States, Poland, Germany, Great Britain and Japan . == Alternative projects == eMap was created by the developer Vadym Klymenko. AlarmMap is an online from the Ukrainian office of Agroprep. The official map of air alarms was developed by Ajax Systems together with the developer Artem Lemeshev, Stfalcon with the support of the Ministry of Statistics.
Read more →
Metadata management

Metadata management involves managing metadata about other data, whereby this "other data" is generally referred to as content data. The term is used most often in relation to digital media, but older forms of metadata are catalogs, dictionaries, and taxonomies. For example, the Dewey Decimal Classification is a metadata management system developed in 1876 for libraries. == Metadata schema == Metadata management goes by the end-to-end process and governance framework for creating, controlling, enhancing, attributing, defining and managing a metadata schema, model or other structured aggregation system, either independently or within a repository and the associated supporting processes (often to enable the management of content). For web-based systems, URLs, images, video etc. may be referenced from a triples table of object, attribute and value. == Scope == With specific knowledge domains, the boundaries of the metadata for each must be managed, since a general ontology is not useful to experts in one field whose language is knowledge-domain specific. == Metadata Manager == In the process of developing a knowledge management solution, creating a metadata schema, and a system in which metadata is managed, a dedicated resource may be appointed to maintain adherence to metadata standards as defined by data owners as well as general best practice. This person is responsible for curation of the business and technical layers of the metadata schema, and commonly involved with strategy and implementation. A metadata manager is not required to master all aspects, or be involved with everything concerning the solution, but an understanding of as much of the process as possible to ensure a relevant schema is developed. == Metadata management over time == Managing the metadata in a knowledge management solution is an important step in a metadata strategy. It is part of the strategy to make sure that the metadata are complete, current and correct at any given time. Managing a metadata project is also about making sure that users of the system are aware of the possibilities allowed by a well-designed metadata system and how to maximize the benefits of metadata. Regularly monitoring the metadata to ensure that the schema remains relevant is advised. === Wikipedia metadata === Wikipedia is a project that actively manages metadata for its articles and files. For example, volunteer editors carefully curate new biographical articles based on the notability (claim to fame), name, birth, and/or death dates. Similarly, volunteer editors carefully curate new architectural articles based on name, municipality, or geo coordinates. When new articles with a valid alternate spelling are added to Wikipedia that match up to existing articles based on metadata, these are then manually checked and if needed, tagged for merging. When new articles are added that are considered out of scope or otherwise unfit for Wikipedia, these are nominated for deletion. To help keep track of metadata on Wikipedia, the new Wikimedia project Wikidata was established in 2012. Click on the pictures to view more metadata about these images:
Read more →
Proof of authority

Proof of authority (PoA) is a category of consensus protocols used with blockchains based on reputation and identity as a stake that delivers comparatively fast and efficient transactions (compared to proof-of-work and proof-of-stake). The most notable platforms using PoA are VeChain, Bitgert, Palm Network and Xodex. == Description == Proof-of-authority is a category of consensus protocols for networks and blockchains where transactions and blocks are built and validated by approved entities known as validators. Their permissions are often granted through a centralized authority, but they can also be granted through a council or decentralized organization. The term "proof-of-authority" was coined by Gavin Wood, co-founder of Ethereum and Parity Technologies. With PoA, validators are incentivized to maintain good behavior and honesty when validating blocks to avoid developing a negative reputation. PoA can have higher security than PoW and even PoS due to validators wanting to avoid damaging their reputation. Because PoA is permissioned, it is not fully trustless. Validators without good reputation may risk having their validator permissions removed. PoA is generally more efficient than PoW and PoS because it operates with fewer nodes and validators, thus requiring fewer duplicated resources.
Read more →
Paper data storage

Paper data storage refers to the use of paper as a data storage device. This includes writing, illustrating, and the use of data that can be interpreted by a machine or is the result of the functioning of a machine. A defining feature of paper data storage is the ability of humans to produce it with only simple tools and interpret it visually. Though now mostly obsolete, paper was once an important form of computer data storage as both paper tape and punch cards were a common staple of working with computers before the 1980s. == History == Before paper was used for storing data, it had been used in several applications for storing instructions to specify a machine's operation. The earliest use of paper to store instructions for a machine was the work of Basile Bouchon who, in 1725, used punched paper rolls to control textile looms. This technology was later developed into the wildly successful Jacquard loom. The 19th century saw several other uses of paper for controlling machines. In 1846, telegrams could be prerecorded on punched tape and rapidly transmitted using Alexander Bain's automatic telegraph. Several inventors took the concept of a mechanical organ and used paper to represent the music. In the late 1880s Herman Hollerith invented the recording of data on a medium that could then be read by a machine. Prior uses of machine readable media, above, had been for control (automatons, piano rolls, looms, ...), not data. "After some initial trials with paper tape, he settled on punched cards..." Hollerith's method was used in the 1890 census. Hollerith's company eventually became the core of IBM. Other technologies were also developed that allowed machines to work with marks on paper instead of punched holes. This technology was widely used for tabulating votes and grading standardized tests. Banks used magnetic ink on checks, supporting MICR scanning. In an early electronic computing device, the Atanasoff–Berry Computer, electric sparks were used to singe small holes in paper cards to represent binary data. The altered dielectric constant of the paper at the location of the holes could then be used to read the binary data back into the machine by means of electric sparks of lower voltage than the sparks used to create the holes. This form of paper data storage was never made reliable and was not used in any subsequent machine. == Modern techniques == === 1D barcodes === Barcodes make it possible for any object that was to be sold or transported to have some computer readable information securely attached to it. Universal Product Code barcodes, first used in 1974, are ubiquitous today. Some people recommend a width of at least 3 pixels for each minimum-width gap and each minimum-width bar for 1D barcodes. The density is about 50 bits per linear inch (about 2 bit/mm). === 2D barcodes === 2D barcodes allow to store much more data on paper, up to 2.9 kbyte per barcode. It is recommended to have a width of at least 4 pixels—e.g., a 4 × 4 pixel = 16 pixel module. == Limits == The limits of data storage depend on the technology to write and read such data. The theoretical limits assume a scanner that can perfectly reproduce the printed image at its printing resolution, and a program which can accurately interpret such an image. For example, an 8 in × 10 in (200 mm × 250 mm) 600 dpi black-and-white image contains 3.43 MiB of data, as does a 300 dpi CMYK printed image. A 2,400 ppi True color (24-bit) image contains about 1.29 GiB of information; printing an image maintaining this data would require a printing resolution of about 120,000 dpi in black and white, or 60,000 dpi with CMYK dots.
Read more →
Closest point method

The closest point method (CPM) is an embedding method for solving partial differential equations on surfaces. The closest point method uses standard numerical approaches such as finite differences, finite element or spectral methods in order to solve the embedding partial differential equation (PDE) which is equal to the original PDE on the surface. The solution is computed in a band surrounding the surface in order to be computationally efficient. In order to extend the data off the surface, the closest point method uses a closest point representation. This representation extends function values to be constant along directions normal to the surface. == Definitions == Closest Point function: Given a surface S , c p ( x ) {\displaystyle {\mathcal {S}},cp(\mathbf {x} )} refers to a (possibly non-unique) point belonging to S {\displaystyle {\mathcal {S}}} , which is closest to x {\displaystyle \mathbf {x} } [SE]. Closest point extension: Let S {\displaystyle {\mathcal {S}}} , be a smooth surface in R d {\displaystyle \mathbb {R} ^{d}} . The closest point extension of a function u : S → R {\displaystyle u:{\mathcal {S}}\rightarrow \mathbb {R} } , to a neighborhood Ω {\displaystyle \Omega } of S {\displaystyle {\mathcal {S}}} , is the function v : Ω → R {\displaystyle v:\Omega \rightarrow \mathbb {R} } , defined by v ( x ) = u ( c p ( x ) ) {\displaystyle v(\mathbf {x} )=u(cp(\mathbf {x} ))} . == Closest point method == Initialization consists of these steps [EW]: If it is not already given, a closest point representation of the surface is constructed. A computational domain is chosen. Typically this is a band around the surface. Replace surface gradients by standard gradients in R 3 {\displaystyle \mathbb {R} ^{3}} . Solution is initialized by extending the initial surface data on to the computational domain using the closest point function. After initialization, alternate between the following two steps: Using the closest point function, extend the solution off the surface to the computational domain. Compute the solution to the embedding PDE on a Cartesian mesh in the computational domain for one time step. == Banding == The surface PDE is extended into R 3 {\displaystyle \mathbb {R} ^{3}} however it is only necessary to solve this new PDE near the surface. Hence, we solve the PDE in a band surrounding the surface for efficient computational purposes. Ω c x : ‖ x − c p ( x ) ‖ 2 ≤ λ {\displaystyle \Omega _{c}{x:\|x-cp(x)\|_{2}\leq \lambda }} where λ {\displaystyle \lambda } is the bandwidth. == Example: Heat equation on a circle == Using initial profile u S ( θ , t ) = sin ⁡ ( θ ) {\displaystyle u_{S}(\theta ,t)=\sin(\theta )} leads to the solution u S ( θ , t ) = exp ⁡ ( − t ) sin ⁡ ( θ ) {\displaystyle u_{S}(\theta ,t)=\exp(-t)\sin(\theta )} for the heat equation. Forward Euler time-stepping is used with relation Δ t = 0.1 Δ x 2 {\displaystyle \Delta t=0.1\Delta x^{2}} and degree-four interpolation polynomials for the interpolations. Second-order centered differences are used for the spatial discretization. The CPM results in the expected second order error in the solution u {\displaystyle u} . == Applications == The closest point method can be applied to various PDEs on surfaces. Reaction–diffusion problems on point clouds [RD], eigenvalue problems [EV], and level set equations [LS] are a few examples.
Read more →
Novell Storage Manager

Novell Storage Manager is a system software package released by Novell in 2004 that uses identity, policy and directory events to automate full lifecycle management of file storage for individual users and organizational groups. By tying storage management to an organization's existing identity infrastructure, it has been pointed out, Novell Storage Manager enables the administration of users across all file servers "as a single pool rather than [in] separate independently managed domains." Novell Storage Manager is a component of the Novell File Management Suite. == How It Works == Novell Storage Manager dynamically manages and provisions storage based on user and group events that occur in the directory, including user creations, group assignments, moves, renames, and deletions. When a change happens in the directory that affects a user’s file storage needs or user storage policy, Storage Manager applies the appropriate policy and makes the necessary changes at the file system level to address those storage needs. The following key components comprise Novell Storage Manager's identity and policy-driven state machine architecture: Directory services; Storage policies; Novell Storage Manager event monitors; Novell Storage Manager policy engine; Novell Storage Manager agents; and Action objects. This state machine architecture enables the engine to properly deal with transient waits with directory synchronization issues. It also allows recovery from failures involving network communications, a target server or a server running a component of Storage Manager—including the policy engine itself. If a failure or interruption occurs at any point during operation, Storage Manager will be able to successfully continue the operation from where it was when the interruption occurred. == Reviews == Jon Toigo called Novell Storage Manager "a robust and smart approach to corralling user files... into an organized and efficient management scheme". He also said it was "best in class" of the products he'd reviewed.
Read more →
MaPS S.A.

MaPS S.A. is a software editor founded in 2011 by Thierry Muller. The company is headquartered in Luxembourg. Its platform, called MaPS System, provides Data Management software for Multichannel Marketing. == History and funding == The first version of MaPS System was released under the agency Prem1um S.A. in 2005 in the partnership with Pingroom agency. In combination with MaPS System, Prem1um also provided various consulting services in Marketing, Publishing and Sales. This is where MaPS System takes its names (M stands for Marketing, P for Publishing and S for Sales). In 2011, after being successful, Prem1um S.A. decided to enable the software MaPS System to operate independently under MaPS S.A., as a separate company and editor of the software. The first financial supports were provided by Malta ICI, a Venture Capital firm, and the local partner Chameleon Invest, a seed-capital fund led by Business Angels, who invested €900,000. In a second investment round in 2014 led by Newion Investments, a Venture Capital firm, €1.4 Million were raised, thus amounting to total assets of €2.2 Million. In 2016, the company was taken over by three private investors. In 2018, after two years of continuous growth and European expansion in Belgium, Germany and Switzerland, MaPS S.A acquired Awevo, an e-commerce web agency. == Products == The services included in MaPS System range from the data centralization, Data Governance to an optimized Multichannel Marketing. The software currently includes more than 35 modules for Master Data Management, Product Information Management, Digital Asset Management, Business Process Management including catalogue Publishing features. == Certifications == In 2019, MaPS System and Awevo received "Made in Luxembourg" label, given to the companies whose services are entirely designed in Luxembourg, without any production or development offshoring. MaPS System is a member of ICT Cluster by Luxinnovation.
Read more →