AI For Business Cards

AI For Business Cards — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Cybersecurity in space

    Cybersecurity in space

    Cybersecurity in space involves the defense of all space assets (e.g. navigation systems, satellites, ground antennas, networks, etc.). The security of space can be affected by attacks such as disruption, corruption as well as the destruction of depended-upon assets/collected data. Government (e.g. militaries) and non-government sectors (e.g. financial industries) have started to become more reliant on numerous space-based services. Due to the criticality of these services, space security experts have identified these assets as high-value targets (HVT) that can cause detrimental consequences to all of Earth. == Scope and definitions == Space assets are broken down by three sub-sectors: the space component, the ground component, and the individual user component. The architecture of space assets is extremely complex and allows for a frequent attack vector utilized, the disruption by radio frequency (RF) cyber-attacks. In 2020, a memorandum was published by President Donald Trump, Space Policy Directive‑5 (SPD‑5). It established principles to ensure the safeguarding of all space assets. In 2023, the National Institute of Standards and Technology’s (NIST) published IR 8270, Introduction to Cybersecurity for Commercial Satellite Operations. This report established a baseline risk-management framework (RMF) to be implemented into space operations. == History == During the Cold War in the 1950s-1960s, the United States and Russia entered what was called the “Space Race”. By 1957, the Soviet Union successfully launched the first satellite into space named Sputnik. By 1961, the first key milestone was accomplished when the Soviet Union’s Yuri Gagarin became the first human to orbit Earth. This was later followed by the first American, Alan Shepard, to be launched into space; this was followed by John Glenn becoming the first American to orbit Earth in 1962. In 1969, a pinnacle milestone was reached when Apollo 11 launched into space and Neil Armstrong became the first man to walk on the moon. As space operations furthered, Commercial off-the-shelf products became increasingly popular but resulted in a rapid increase to the cyber-attack surface. Public awareness of space security did not increase until 2022, when the Viasat KA-SAT incident occurred, resulting in the disruption of a large number of modems across Europe. The attack was later accredited to Russia by the U.S. and the U.K. Policy and standards started to rapidly increase by 2020. The establishment of SPD-5 was released in 2020 followed by asset hardening instructions in 2022, and NIST’s IR 8270 in 2023. It was not until 2025 that Europe published their own findings in the Space Threat Landscape 2025 Report. This document led to the EU’s security proposals and standards. == Threats == === Radio-frequency Interference and Global Navigation Satellite Systems (GNSS) Spoofing === Space services are highly dependent on RF links for systems such as GNSS, however, a consequence of this dependency on RF is denial of service and deception. In 2017, the Black Sea maritime event occurred when numerous ships were subject to spoofing. Space services depend on RF links susceptible to jamming (denial) and spoofing (deception), including for GNSS/Positioning, Navigation, and Timing (PNT). Annotated incidents include the 2017 Black Sea maritime spoofing event affecting numerous ships, and extensive aviation GNSS spoofing patterns surveyed in various regions during 2024–2025. === Network intrusion and malware === Cyber threats can intrude and infect assets with malware. They do this by finding misconfiguration vulnerabilities, remote-management interfaces, and/or supply-chain vulnerabilities mainly in ground networks and user terminals. When KA-SAT occurred, it resulted from bulk modem disturbances. Forensic analysts later suggested malicious management controls and wiper malware as the root cause. === Supply-chain and lifecycle risks === The outsource of COTS components, external vendors, and software defined payloads allowed for vulnerabilities to emerge in the System/Product Lifecycle. In response, EU recommended the implementation of lifecycle-wide controls as mitigating factors. === Espionage, disruption, and influence === As Advanced Persistent Threats (APTs), Global Positioning System (GPS) intervention, and information warfare increased, assets like transponders became more frequent targets of attack. == Noteworthy incidents == The Viasat KA‑SAT incident of 2022, where a large number of modems in Europe were disrupted, resulted in the loss of telemetry access to a significant amount of wind turbines in Germany. The mass GNSS deception of the Black Sea in 2017 affected numerous ships when they started to convey fake central locations in Russia. Between 2024 and 2025, there was a mass, repetitive aviation GNSS spoofing that affected the aircraft of various regions. == Standards, guidelines, and best practices == SPD‑5 (U.S.) – This established risk-based engineering, verifying and ensuring positive control, and the implementation of risk mitigation controls. NIST IR 8270 – This created a RMF for COTS satellites. CISA/FBI SATCOM Advisory (AA22‑076) – Provided guidance on hardening techniques such as least-privileged, access control, encryption, etc.). ENISA Space Threat Landscape 2025 – It established the categorization of assets to organize threats, ensuring the observation of system/product lifecycle, and an RMF for COTS satellites. ECSS‑E‑ST‑80C (2024) – This established a standard for securing lifecycles in space, covering all segments (e.g. ground, launch, etc.). == Regulation and governance == As of 2025, there is no international regulations established for space assets, but the U.S., EU, and ESA institutional initiatives have published standards to address security concerns. The U.S. implemented SPD-5 and the Federal Communications Commission (FCC); the FCC addressed orbital debris. While the EU created standards to address technological mandates and support the implementation of NIS2. Lastly, the ESA created a special operations center to safeguard their satellites. International governance is still evolving, but forums have been held by the United Nations Committee on the Peaceful Uses of Outer Space. International conversations under forums such as the UN Committee on the Peaceful Uses of Outer Space (COPUOS) progressively note the cyber–space safety relationship, though formal global norms specific to space cybersecurity continue evolving. == Risk management approaches == Through RMF, mitigation controls have been implemented to reduce the risk of exploitation while increasing the security of space. Controls addressing mitigation include proper configuration, system hardening, zero-trust architectures, encryption, etc. Both the government and industries have placed an emphasis on incident response procedures to identify, contain, and remediate breaches.

    Read more →
  • Vujak

    Vujak

    VuJak is an early video sampler, a VJ remix and mashup tool created in 1992 by Brian Kane, Lisa Eisenpresser, and Jay Haynes. The original name of the project was Mideo, but it was later changed to VuJak. VuJak was based on MIDI control of video in real-time. It was created with MAX from Opcode Systems, and utilized the newly released QuickTime 1.0 movie object. The first working version of the program was built on a Mac IIfx with 8 megs of ram, and could jump in real-time across a 160 x 120 pixel QuickTime movie via a midi keyboard. Later versions could manipulate full screen video, included the first real-time video scratch feature, had looping, vari-speed, and random play features, and allowed for recording and editing of video sequences within the application. VuJak also had networking capabilities which allowed artists to "jam" in real time across standard phone lines. The first public exhibition of VuJak was at the Digital Hollywood conference in Beverly Hills in 1993, where it was promoted by Timothy Leary. VuJak was featured in Mondo 2000, CBS Evening News, Wired Magazine, Electronic Musician, Billboard Magazine, The Hollywood Reporter, and it was used to create promotional videos for MTV. In 1994, VuJak was a featured interactive exhibition at the Exploratorium in San Francisco. Development of VuJak ceased in 1995.

    Read more →
  • Motor theory of speech perception

    Motor theory of speech perception

    The motor theory of speech perception is the hypothesis that people perceive spoken words by identifying the vocal tract gestures with which they are pronounced rather than by identifying the sound patterns that speech generates. It originally claimed that speech perception is done through a specialized module that is innate and human-specific. Though the idea of a module has been qualified in more recent versions of the theory, the idea remains that the role of the speech motor system is not only to produce speech articulations but also to detect them. The hypothesis has gained more interest outside the field of speech perception than inside. This has increased particularly since the discovery of mirror neurons that link the production and perception of motor movements, including those made by the vocal tract. The theory was initially proposed in the Haskins Laboratories in the 1950s by Alvin Liberman and Franklin S. Cooper, and developed further by Donald Shankweiler, Michael Studdert-Kennedy, Ignatius Mattingly, Carol Fowler and Douglas Whalen. == Origins and development == The hypothesis has its origins in research using pattern playback to create reading machines for the blind that would substitute sounds for orthographic letters. This led to a close examination of how spoken sounds correspond to the acoustic spectrogram of them as a sequence of auditory sounds. This found that successive consonants and vowels overlap in time with one another (a phenomenon known as coarticulation). This suggested that speech is not heard like an acoustic "alphabet" or "cipher," but as a "code" of overlapping speech gestures. === Associationist approach === Initially, the theory was associationist: infants mimic the speech they hear and that this leads to behavioristic associations between articulation and its sensory consequences. Later, this overt mimicry would be short-circuited and become speech perception. This aspect of the theory was dropped, however, with the discovery that prelinguistic infants could already detect most of the phonetic contrasts used to separate different speech sounds. === Cognitivist approach === The behavioristic approach was replaced by a cognitivist one in which there was a speech module. The module detected speech in terms of hidden distal objects rather than at the proximal or immediate level of their input. The evidence for this was the research finding that speech processing was special such as duplex perception. === Changing distal objects === Initially, speech perception was assumed to link to speech objects that were both the invariant movements of speech articulators the invariant motor commands sent to muscles to move the vocal tract articulators This was later revised to include the phonetic gestures rather than motor commands, and then the gestures intended by the speaker at a prevocal, linguistic level, rather than actual movements. === Modern revision === The "speech is special" claim has been dropped, as it was found that speech perception could occur for nonspeech sounds (for example, slamming doors for duplex perception). === Mirror neurons === The discovery of mirror neurons has led to renewed interest in the motor theory of speech perception, and the theory still has its advocates, although there are also critics. == Support == === Nonauditory gesture information === If speech is identified in terms of how it is physically made, then nonauditory information should be incorporated into speech percepts even if it is still subjectively heard as "sounds". This is, in fact, the case. The McGurk effect shows that seeing the production of a spoken syllable that differs from an auditory cue synchronized with it affects the perception of the auditory one. In other words, if someone hears "ba" but sees a video of someone pronouncing "ga", what they hear is different—some people believe they hear "da". People find it easier to hear speech in noise if they can see the speaker. People can hear syllables better when their production can be felt haptically. === Categorical perception === Using a speech synthesizer, speech sounds can be varied in place of articulation along a continuum from /bɑ/ to /dɑ/ to /ɡɑ/, or in voice onset time on a continuum from /dɑ/ to /tɑ/ (for example). When listeners are asked to discriminate between two different sounds, they perceive sounds as belonging to discrete categories, even though the sounds vary continuously. In other words, 10 sounds (with the sound on one extreme being /dɑ/ and the sound on the other extreme being /tɑ/, and the ones in the middle varying on a scale) may all be acoustically different from one another, but the listener will hear all of them as either /dɑ/ or /tɑ/. Likewise, the English consonant /d/ may vary in its acoustic details across different phonetic contexts (the /d/ in /du/ does not technically sound the same as the one in /di/, for example), but all /d/'s as perceived by a listener fall within one category (voiced alveolar plosive) and that is because "linguistic representations are abstract, canonical, phonetic segments or the gestures that underlie these segments." This suggests that humans identify speech using categorical perception, and thus that a specialized module, such as that proposed by the motor theory of speech perception, may be on the right track. === Speech imitation === If people can hear the gestures in speech, then the imitation of speech should be very fast, as in when words are repeated that are heard in headphones as in speech shadowing. People can repeat heard syllables more quickly than they would be able to produce them normally. === Speech production === Hearing speech activates vocal tract muscles, and the motor cortex and premotor cortex. The integration of auditory and visual input in speech perception also involves such areas. Disrupting the premotor cortex disrupts the perception of speech units such as plosives. The activation of the motor areas occurs in terms of the phonemic features which link with the vocal track articulators that create speech gestures. The perception of a speech sound is aided by pre-emptively stimulating the motor representation of the articulators responsible for its pronunciation . Auditory and motor cortical coupling is restricted to a specific range of neuronal firing frequency. === Perception-action meshing === Evidence exists that perception and production are generally coupled in the motor system. This is supported by the existence of mirror neurons that are activated both by seeing (or hearing) an action and when that action is carried out. Another source of evidence is that for common coding theory between the representations used for perception and action. == Criticisms == The motor theory of speech perception is not widely held in the field of speech perception, though it is more popular in other fields, such as theoretical linguistics. As three of its advocates have noted, "it has few proponents within the field of speech perception, and many authors cite it primarily to offer critical commentary".p. 361 Several critiques of it exist. === Multiple sources === Speech perception is affected by nonproduction sources of information, such as context. Individual words are hard to understand in isolation but easy when heard in sentence context. It therefore seems that speech perception uses multiple sources that are integrated together in an optimal way. === Production === The motor theory of speech perception would predict that speech motor abilities in infants predict their speech perception abilities, but in actuality it is the other way around. It would also predict that defects in speech production would impair speech perception, but they do not. However, this only affects the first and already superseded behaviorist version of the theory, where infants were supposed to learn all production-perception patterns by imitation early in childhood. This is no longer the mainstream view of motor-speech theorists. === Speech module === Several sources of evidence for a specialized speech module have failed to be supported. Duplex perception can be observed with door slams. The McGurk effect can also be achieved with nonlinguistic stimuli, such as showing someone a video of a basketball bouncing but playing the sound of a ping-pong ball bouncing. As for categorical perception, listeners can be sensitive to acoustic differences within single phonetic categories. As a result, this part of the theory has been dropped by some researchers. === Sublexical tasks === The evidence provided for the motor theory of speech perception is limited to tasks such as syllable discrimination that use speech units not full spoken words or spoken sentences. As a result, "speech perception is sometimes interpreted as referring to the perception of speech at the sublexical level. However, the ultimate goal of these studies is presumably to understand the neural processes supporting the ability to process spee

    Read more →
  • Comparison of raster graphics editors

    Comparison of raster graphics editors

    Raster graphics editors can be compared by many variables, including availability. == List == == General information == Basic general information about the editor: creator, company, license, etc. == Operating system support == The operating systems on which the editors can run natively, that is, without emulation, virtual machines or compatibility layers. In other words, the software must be specifically coded for the operation system; for example, Adobe Photoshop for Windows running on Linux with Wine does not fit. == Features == == Color spaces == == File support ==

    Read more →
  • Affinity (software)

    Affinity (software)

    Affinity is a graphics editor developed by Serif, a subsidiary of Canva. It is simultaneously a vector graphics editor, a raster graphics editor and a desktop publishing application. It was first released in 2025 as a successor to Serif's Affinity Designer, Affinity Photo and Affinity Publisher, uniting the three editors into one application. While the previous versions competed individually against Adobe's Illustrator, Photoshop, and InDesign, Affinity 3.0 integrates their functionality into a single application. It uses a freemium model monetized by AI features exclusive to Canva Pro subscribers. == Functionality == Affinity is divided into a number of workspaces ("studios"), which are equivalent to the previous suite of Affinity applications: "vector" for vector graphics (Designer), "pixel" for raster editing (Photo), and "layout" for desktop publishing (Publisher). Additionally, it introduces the ability to create custom workspaces. The application supports real-time previews and non-destructive editing, which are based on GPU acceleration. Supported file formats include Adobe Photoshop, InDesign and Illustrator files, PDF, SVG, and TIFF, as well as a custom .af file format. === Vector editing === === Raster editing === Affinity includes photo editing tools including adjustments, masks, blend modes, batch processing, and retouching facilities. Additionally, the application can develop RAW files, similar to Adobe Lightroom. === Desktop publishing === Publishing features include master pages, text styles, and advanced typography. === AI features === The application supports Canva's existing AI features, such as background removal and generative fill. This requires a Canva subscription. == Development == === Background and acquisition (2014–2024) === Serif launched the original Affinity suite starting with Affinity Designer in 2014, followed by Photo (2015) and Publisher (2019). The software gained popularity for its one-time purchase model, contrasting with Adobe's subscription-based Creative Cloud. In November 2022, Serif released Version 2 of the suite, introducing a "Universal License" that covered all three apps across all platforms. In March 2024, Canva acquired Serif for approximately A$580 million (£300 million). Following user backlash regarding a potential shift to subscriptions, Canva and Serif issued a joint "Pledge" committing to four key principles: fair pricing, no mandatory subscriptions, perpetual licenses for existing products, and continued development of Affinity as a standalone suite. === Unified release (2025) === In September 2025, Serif pulled all existing versions of Affinity Designer, Affinity Photo and Affinity Publisher from sale ahead an upcoming announcement on 30 October; also ahead of the announcement, the iPadOS versions of the Affinity suite became free on App Store. During a "Creative Freedom" keynote on 30 October 2025, Canva released a new version now simply branded as "Affinity" (also known as "Affinity by Canva"), and referred to internally as version 3.0. Version 3 drops the separate applications and integrates their functionality into a singular application, and adds the ability to export directly to the Canva platform. It also adds a Canva AI studio, including background removal, "Expand & Edit", and generative fill. As of version 3, Affinity has switched to a freemium model; it is now available at no charge to users, although access to Canva AI features are locked behind the existing Canva Pro subscription service. Serif stated that the perpetually-licensed version 2 will remain available to existing owners, although it will no longer be actively maintained. The new version is currently available for macOS and Windows only, with an iPadOS version to be released soon. == Reception == The change in business model by Canva in 2025 was met with mixed reception, including concerns about its incorporation of AI features. Some users were concerned that their projects would be used for machine learning purposes, or that future versions would suffer from a lack of maintenance or become adware. Additionally, some felt it turned Affinity into fundamentally subscription-based software, given the prevalence of these features in professional contexts. Affinity publicly stated on social media that it would remain "free forever", users' projects would not be used to train AI models, and that "Canva has built a sustainable business model that allows this kind of generosity. And when more professionals use Affinity, Canva can sell more seats into businesses."

    Read more →
  • BeeSafe

    BeeSafe

    BeeSafe is a personal safety mobile app launched in 2015 as a Slovak startup. It is a location-based security service that notifies family members and friends in case the user of the app gets in danger. The app has received numerous awards. The app has more than 700 downloads and 250 active logins from more than 60 countries worldwide. == History == BeeSafe was founded on March 20, 2015 by Peter Stražovec and Michal Kačerík. The project was a winner of Žilina’s Startup Weekend 2013 and a StartupAwards.SK 2015 finalist. Later on, the app was released in the Android and iOS marketplace. The whole BeeSafe project was in The Spot booster and incubator in Bratislava for three months. BeeSafe entered into an agreement with the city of Piešťany in November 2015 to increase the security of its citizen by connecting the mobile app with the police platform. It is the first city that started using the BeeSafe platform. Further on, the application tries to help people in other Slovak cities. The cities can see the users only if they are in danger. == Awards == BeeSafe app received the Via Bona award, it is a winner of a Slovak startup and has other nominations too.

    Read more →
  • NeoPaint

    NeoPaint

    NeoPaint is a raster graphics editor for Windows and MS-DOS. It supports several file formats including JPEG, GIF, BMP, PNG, and TIFF. The developer, NeoSoft, advertises NeoPaint as "being simple enough for use by children while remaining powerful enough for the purposes of advanced image editing". The first version, NeoPaint 1.0, was released in 1992 on floppy disks. It supported video modes ranging from 640x350 to 1024x768 and multiple fonts. NeoPaint 2.2 came out for MS-DOS 3.1 in 1993, with support of for 2, 16, or 256 color images in Hercules, EGA, VGA, and Super VGA modes. NeoPaint 3.1 was released in 1995 supporting 24-bit images and formats like PCX, TIFF and BMP. NeoPaint 3.2 was released in 1996. An updated version, NeoPaint 3.2a, supported the GIF file format. NeoPaint 3.2d was released in 1998. A Windows 95 version named NeoPaint for Windows v4.0 was released in 1999 supporting the PNG file format. On September 1, 2018 the program was rebranded as PixelNEO, becoming one of the VisualNEO software products. Formats such as JPEG 2000, ICO, CUR, PSD and RAW are supported.

    Read more →
  • Cyborg

    Cyborg

    A cyborg () is a being with both organic and biomechatronic body parts. It is a portmanteau of cybernetic and organism. The term was coined in 1960 by Manfred Clynes and Nathan S. Kline. In contrast to biorobots and androids, the term cyborg applies to a living organism that has undergone restoration of function or enhancements of abilities due to the integration of some artificial component or technology that relies on feedback. == Description and definition == Alternative names for a cyborg include cybernetic organism, cyber-organism, cyber-organic being, cybernetically enhanced organism, cybernetically augmented organism, technorganic being, techno-organic being, and techno-organism. Unlike bionics, biorobotics, or androids, a cyborg is an organism that has restored function or, especially, enhanced abilities due to the integration of some artificial component or technology that relies on some sort of feedback, for example: prostheses, artificial organs, implants or, in some cases, wearable technology. Cyborg technologies may enable or support collective intelligence. A related idea is the "augmented human". While cyborgs are commonly thought of as mammals, including humans, the term can apply to any organism. === Placement and distinctions === D. S. Halacy's Cyborg: Evolution of the Superman (1965) featured an introduction which spoke of a "new frontier" that was "not merely space, but more profoundly the relationship between 'inner space' to 'outer space' – a bridge...between mind and matter." In "A Cyborg Manifesto", Donna Haraway rejects the notion of rigid boundaries between humanity and technology, arguing that, as humans depend on more technology over time, humanity and technology have become too interwoven to draw lines between them. She believes that since we have allowed and created machines and technology to be so advanced, there should be no reason to fear what we have created, and cyborgs should be embraced because they are part of human identities. However, Haraway has also expressed concern over the contradictions of scientific objectivity and the ethics of technological evolution, and has argued that "There are political consequences to scientific accounts of the world." === Biosocial definition === According to some definitions of the term, the physical attachments that humans have with even the most basic technologies have already made them cyborgs. In a typical example, a human with an artificial cardiac pacemaker or implantable cardioverter-defibrillator would be considered a cyborg, since these devices measure voltage potentials in the body, perform signal processing, and can deliver electrical stimuli, using a synthetic feedback mechanism to keep that person alive. Implants, especially cochlear implants, that combine mechanical modification with any kind of feedback response are also cybernetic enhancements. Some theorists cite such modifications as contact lenses, hearing aids, smartphones, or intraocular lenses as examples of fitting humans with technology to enhance their biological capabilities. The emerging trend of implanting microchips inside the body (mainly the hands), to make financial operations like a contactless payment, or basic tasks like opening a door, has been erroneously marketed as more recent examples of cybernetic enhancement. The latter has not yet seen significant traction outside niche areas in Scandinavia and in actual function is little more than a pre-programmed Radio-frequency identification (RFID) microchip encased in glass that does not interact with the human body (it is the same technology used in the microchips injected into animals for ease of identification), thus not fitting the definition of a cybernetic implant. As cyborgs currently are on the rise, some theorists argue there is a need to develop new definitions of aging. For instance, a bio-techno-social definition of aging has been suggested. The term is also used to address human-technology mixtures in the abstract. This includes not only commonly used pieces of technology such as phones, computers, the Internet, and so on, but also artifacts that are not usually considered technology; for example, pen and paper, and speech and language. When augmented with these technologies and connected in communication with people in other times and places, a person becomes capable of more than they were before. An example is a computer, which gains power by using Internet protocols to connect with other computers. Another example is a social-media bot—either a bot-assisted human or a human-assisted-bot—used to target social media with likes and shares. Cybernetic technologies thus include highways, pipes, electrical wiring, buildings, electrical plants, libraries, and other infrastructural constructs. Bruce Sterling, in his Shaper/Mechanist universe, suggested an idea of an alternative cyborg called 'Lobster', which is made not by using internal implants, but by using an external shell (e.g. a powered exoskeleton). The computer game Deus Ex: Invisible War prominently features cyborgs called Omar, Russian for 'lobster'. === Evolutionary perspective === In 1994, Hans Hass formulated a scientific view of the human-machine hybrids he called "hypercells". They can expand their biological cell body with artificial artifacts and thus expand their performance body. The theory of hypercells or Homo proteus, as Hass called the human-machine hybrid to distinguish Homo sapiens, extends Charles Darwin's theory of evolution and deals with the course of evolution beyond humans. In his 2019 book Novacene, James Lovelock used the term "cyborgs" to refer to the next generation of beings who will become the "understanders of the future" and "lead the cosmos to self-knowledge". While acknowledging the organic component in Clynes' and Kline's definition, he proposed that these cyborgs "will have designed and built themselves from the artificial intelligence systems we have already constructed", and used the term cyborg "to emphasize that the new intelligent beings will have arisen, like us, from Darwinian evolution." == Origins == The concept of a man-machine mixture was widespread in science fiction before World War II. As early as 1843, Edgar Allan Poe described a man with extensive prostheses in the short story "The Man That Was Used Up". In 1911, Jean de La Hire introduced the Nyctalope, a science fiction hero who was perhaps the first literary cyborg, in Le Mystère des XV (later translated as The Nyctalope on Mars). Nearly two decades later, Edmond Hamilton presented space explorers with a mixture of organic and machine parts in his 1928 novel The Comet Doom. He later featured the talking, living brain of an old scientist, Simon Wright, floating in a transparent case, and in all the adventures of his famous hero, Captain Future. In 1944, in the short story "No Woman Born", C. L. Moore wrote of Deirdre, a dancer, whose body was burned completely and whose brain was placed in a faceless but beautiful and supple mechanical body. In 1960, the term "cyborg" was coined by Manfred E. Clynes and Nathan S. Kline to refer to their conception of an enhanced human being who could survive in extraterrestrial environments: For the exogenously extended organizational complex functioning as an integrated homeostatic system unconsciously, we propose the term 'Cyborg'. Their concept was the outcome of thinking about the need for an intimate relationship between human and machine as the new frontier of space exploration was beginning to develop. A designer of physiological instrumentation and electronic data-processing systems, Clynes was the chief research scientist in the Dynamic Simulation Laboratory at Rockland State Hospital in New York. The term first appears in print 5 months earlier when The New York Times reported on the "Psychophysiological Aspects of Space Flight Symposium" where Clynes and Kline first presented their paper: A cyborg is essentially a man-machine system in which the control mechanisms of the human portion are modified externally by drugs or regulatory devices so that the being can live in an environment different from the normal one. Thereafter, Hamilton would first use the term "cyborg" explicitly in the 1962 short story, "After a Judgment Day", to describe the "mechanical analogs" called "Charlies," explaining that "[c]yborgs, they had been called from the first one in the 1960s...cybernetic organisms." The 1972 novel Cyborg by Martin Caidin introduced the character of bionic government agent Steve Austin, and was adapted into the popular television series The Six Million Dollar Man, which ran from 1973 to 1978. In 2001, a book titled Cyborg: Digital Destiny and Human Possibility in the Age of the Wearable computer was published by Doubleday. Some of the ideas in the book were incorporated into the documentary film Cyberman that same year. == Cyborg tissues in engineering == Cyborg tissues structured with carbon nanotubes and plan

    Read more →
  • Elastix (image registration)

    Elastix (image registration)

    Elastix is an image registration toolbox built upon the Insight Segmentation and Registration Toolkit (ITK). It is entirely open-source and provides a wide range of algorithms employed in image registration problems. Its components are designed to be modular to ease a fast and reliable creation of various registration pipelines tailored for case-specific applications. It was first developed by Stefan Klein and Marius Staring under the supervision of Josien P.W. Pluim at Image Sciences Institute (ISI). Its first version was command-line based, allowing the final user to employ scripts to automatically process big data-sets and deploy multiple registration pipelines with few lines of code. Nowadays, to further widen its audience, a version called SimpleElastix is also available, developed by Kasper Marstal, which allows the integration of elastix with high level languages, such as Python, Java, and R. == Image registration fundamentals == Image registration is a well-known technique in digital image processing that searches for the geometric transformation that, applied to a moving image, obtains a one-to-one map with a target image. Generally, the images acquired from different sensors (multimodal), time instants (multitemporal), and points of view (multiview) should be correctly aligned to proceed with further processing and feature extraction. Even though there are a plethora of different approaches to image registration, the majority is composed of the same macro building blocks, namely the transformation, the interpolator, the metric, and the optimizer. Registering two or more images can be framed as an optimization problem that requires multiple iterations to converge to the best solution. Starting from an initial transformation computed from the image moments the optimization process searches for the best transformation parameters based on the value of the selected similarity metric. The figure on the right shows the high-level representation of the registration of two images, where the reference remains constant during the entire process, while the moving one will be transformed according to the transformation parameters. In other words, the registration ends when the similarity metric, which is a mathematical function with a certain number of parameters to be optimized, reaches the optimal value which is highly dependent on the specific application. == Main building blocks == Following the structure of the image registration workflow, the elastix toolbox proposes a modular solution that implements for each of the building blocks different algorithms, highly employed in medical image registration, and helps the final users to build their specific pipeline by selecting the most suitable algorithm for each of the main building blocks. Each block is easily configurable both by selecting pre-defined initialization values or by trying multiple sets of parameters and then choosing the most performing one. The registration is performed on images, and the elastix toolbox supports all the data formats supported by ITK, ranging from JPEG and PNG to medical standard formats such as DICOM and NIFTI. It also stores physical pixel spacing, the origin and the relative position to an external world reference system, when provided in the metadata, to facilitate the registration process, especially in medical field applications. === Transformation === The transformation is an essential building block, since it defines the allowable transformations. In image registration, the main distinction can be done between parallel-to-parallel and parallel-to-non parallel (deformable) line mapping transformations. In the elastix toolbox, the final users can select one transformation or compose more transformations either through addition or via composition. Below are reported the different transformation models in order of increasing flexibility, along with the corresponding elastix class names between brackets. Translation (TranslationTransform) allows only translations Rigid (EulerTransform) expands the translation adding rotations and the object is seen as a rigid body Similarity (SimilarityTransform) expands the rigid transformation by introducing isotropic scaling Affine (AffineTransform) expands the rigid transformation allowing both scaling and shear B-splines (BSplineTransform) is a deformable transformation usually preceded by a rigid or affine one Thin-plate splines (SplineKernelTransform) is a deformable transformation belonging to the class of kernel-based transformations that is a composition of and affine and a non-rigid part === Metric === The similarity metric is the mathematical function whose parameters should be optimized to reach the desired registration, and, during the process, it is computed multiple times. Below are reported the available metrics computed employing the reference and the transformed images and the corresponding elastix class names between brackets. Mean squared difference (AdvancedMeanSquares) to be used for mono-modal applications Normalized correlation coefficient (AdvancedNormalizedCorrelation) to be used for images that have an intensity linear relationship Mutual information (AdvancedMattesMutualInformation) to be used for both mono- and multi-modal applications and optimized to reach better performance compared to the normalized version Normalized mutual information (NormalizedMutualInformation) for both mono- and multi-modal applications Kappa statistic (AdvancedKappaStatistic) to be used only for binary images === Sampler === For the computation of the similarity metrics, it is not always necessary to consider all the voxels and, sometimes, it can be useful to use only a fraction of the voxels of the images, i.e. to reduce the execution time for big input images. Below are reported the available criteria for selecting a fraction of the voxels for the similarity metric computation and the corresponding elastix class names between brackets. Full (Full) to employ all the voxels Grid (Grid) to employ a regular grid defined by the user to downsample the image Random (Random) to randomly select a percentage of voxels defined by the users (all voxels have equal probability to be selected) Random coordinate (RandomCoordinate) like the random criterion, but in this case also off-grid positions can be selected to simplify the optimization process === Interpolator === After the application of the transformation, it may occur that the voxels used for the similarity metric computation are at non-voxel positions, so intensity interpolation should be performed to ensure the correctness of the computed values. Below are reported the implemented interpolators and the corresponding elastix class names between brackets. Nearest neighbor (NearestNeighborInterpolator) exploits little resources, but gives low quality results Linear (LinearInterpolator) is sufficient in general applications N-th order B-spline (BSplineInterpolator) can be used to increase the order N, increasing quality and computation time. N=0 and N=1 indicate the nearest neighbor and linear cases respectively. === Optimizer === The optimizer defines the strategy employed for searching the best transformation parameter to reach the correct registration, and it is commonly an iterative strategy. Below are reported some of the implemented optimization strategies. Gradient descent Robbins-Monro, similar to the gradient descent, but employing an approximation of the cost function derivatives A wider range of optimizers is also available, such as Quasi-Newton or evolutionary strategies. === Other features === The elastix software also offers other features that can be employed to speed up the registration procedure and to provide more advanced algorithms to the end-users. Some examples are the introduction of blur and Gaussian pyramid to reduce data complexity, and multi-image and multi-metric framework to deal with more complex applications. == Applications == Elastix has applications mainly in the medical field, where image registration is fundamental to get comprehensive information regarding the analysed anatomical region. It is widely employed in image-guided surgery, tumour monitoring, and treatment assessment. For example, in radiotherapy planning, image registration allows to correctly deliver the treatment and evaluate the obtained results. Thanks to the wide range of implemented algorithms, the use of the elastix software allows physicians and researchers to test different registration pipelines from the simplest to more complex ones, and to save the best one as a configuration file. This file and the fact that the software is completely open-source makes it easy to reproduce the work, that can help supporting the open science paradigm, and allows fast reuse on different patients data. In image-guided surgery, registration time and accuracy are critical points, considering that, during the registration, the patient is on the operating table, and the imag

    Read more →
  • G'MIC

    G'MIC

    G'MIC (GREYC's Magic for Image Computing) is a free and open-source framework for image processing. It defines a script language that allows the creation of complex macros. Originally usable only through a command line interface, it is currently mostly popular as a GIMP plugin, and is also included in Krita. G'MIC is dual-licensed under CECILL-2.1 or CECILL-C. == Features == G'MIC's graphical interface is notable for its noise removal filters, which came from an earlier project called GREYCstoration by the same authors. G'MIC offers many built-in commands for image processing, including basic mathematical manipulations, look up tables, and filtering operations. More complex macros and pipelines built out of those commands are defined in its library files. == Interpreters == === Command line === G'MIC is primarily a script language callable from a shell. For example, to display an image: This command displays the image contained in the file image.jpg and allows zooming in to examine values. Several filters can be applied in succession. For example, to crop and resize an image: === Graphical interface === G'MIC comes with a Qt-based graphical interface, which may be integrated as a Gimp or Krita plugin. It contains several hundred filters written in the G'MIC language, dynamically updated through an internet feed. The interface provides a preview and setting sliders for each filter. G'MIC is one of the most popular Gimp plugins. === G'MIC Online === Most of the filters available for the graphical interface are also available online. === ZArt === ZArt is a graphical interface for real-time manipulation of webcam images. === libgmic === Libgmic is a C++ library that can be linked to third-party applications. It sees integration in Flowblade and Veejay.

    Read more →
  • PANGU (software)

    PANGU (software)

    The PANGU (Planet and Asteroid Natural scene Generation Utility) is a computer graphics utility of which the development was funded by ESA and performed by University of Dundee. It generates scenes of planets, moons, asteroids, spacecraft and rovers. The main purpose of the tool is to test and validate navigation techniques based on the processing of images coming from on-board sensors, such as a camera or imaging LIDAR on a planetary lander.

    Read more →
  • EditDV

    EditDV

    EditDV was a video editing software released by Radius, Inc. in late 1997 as an evolution of their earlier Radius Edit product. EditDV was one of the first products providing professional-quality editing of the then new DV format at a relatively affordable cost ($999 including Radius FireWire capture card) and was named "The Best Video Tool of 1998". Originally EditDV was available for Macintosh only but in February 2000 EditDV 2.0 for Windows was released. With version 3.0 EditDV's name was changed to CineStream. == Features == Originally bundled with a FireWire card, EditDV 1.5 got updated into a less expensive software only package for use with the newer PowerMac G3 that came with a FireWire interface. Later, a scaled down version named EditDV 1.6.1 Unplugged was released as a freeware version next to EditDV 2.0. Unlike many other applications at the time which transcoded video to M-JPEG for editing, EditDV provided lossless native editing of the DV format. Only transitions (such as dissolves or wipes), effects (such as rotating or scaling the video, adjusting the audio level, or adding titles) and filters (such as changing the brightness or color balance) needed to be rendered. This also had the disadvantage to not work with analogue video capture. EditDV was built on top of QuickTime and supported QuickTime filters as well as its own built-in effects and transitions. Effects could be animated using keyframes. EditDV 2.0 worked natively with Quicktime MOV format. For Microsoft Windows users, where the standard was AVI, this required the use of a provided external conversion tool afterwards when AVI was wanted. The user interface had a Project window for organising clips into bins, a Sequence window with a multi-track timeline for arranging clips into a program using three-point editing, and Source and Program monitor windows. A finished program could either be exported as a QuickTime movie or written back to DV tape using the "print to video" command. Version 3.0, then renamed CineStream, shifted towards web designers who wanted to add video streaming interactivity to a website. The new feature called EventStream allowed setting clickable hot spots to link to another location, either to another page with a URL or to another video. This feature distinguished CineStream from the rest of the competition. == Products == The EditDV product family included a number of related products, all sharing a similar name: EditDV Video editing software (Mac and Windows) SoftDV A QuickTime software codec for playing DV media, included as part of EditDV (Mac and Windows) MotoDV PCI-based FireWire interface with DV capture software (Mac and Windows) PhotoDV Software to capture high-quality stills from a DV tape using MotoDV hardware (Mac and Windows) RotoDV Software for rotoscoping (painting over video), released in Sept 1999 (Macintosh only) == Name changes and eventual demise == In 1999, the company Radius Inc. changed its name to Digital Origin. In 2000, Digital Origin Inc (and EditDV) was bought by Media 100. In early 2001, Media 100 released an updated version of EditDV under the new name CineStream 3.0. Later that year (October 2001) Media 100 was bought by Autodesk's Discreet Division. CineStream for Macintosh required classic Mac OS. It was never ported to Mac OS X and faced increasing competition on that platform from Apple's own Final Cut Pro application. Development of EditDV/Cinestream was officially discontinued in 2002.

    Read more →
  • Telligent Community

    Telligent Community

    Telligent Community is a community and collaboration software platform developed by Telligent Systems and was first released in 2004. Telligent Community is built on the Telligent Evolution platform, with a variety of core applications running on top of it such as blogs, forums, media galleries, and wikis. Additional applications from third parties using the API's and REST stack can be installed or integrated with the platform. Telligent Community is built with ASP.NET, C#, and Microsoft SQL Server. It is available as downloadable software that can be installed on a web server or via hosting providers. The current version is Verint Community 12.0 which was released February 2012. The product used to be named Community Server before being rebranded as part of the 5.0 release. == History == Telligent Systems was founded by Rob Howard in 2004, who was previously part of Microsoft's ASP.NET team. Telligent introduced its first product, Community Server, in the fall of 2004. Community Server was one of the first integrated community platforms that brought together blogs, photo galleries, wikis, forums, user profiles and more. Community Server was based on the merger of three then-widely used open source ASP.NET projects: the ASP.NET Forums, nGallery photo gallery, and .Text blog engine. The people behind those projects (Scott Watermasysk, Jason Alexander, and Rob Howard) joined together as Telligent Systems and along with several other software developers created Community Server 1.0. Between 2004 and 2009 Community Server steadily grew in scope, features, and capabilities. In 2008 Telligent Systems released a second version of Community Server that targeted as an Enterprise Social Software platform used to create and manage internal employee communities and intranets. Originally branded as Community Server Evolution this was later renamed Telligent Enterprise. Telligent also announced a new Enterprise Reporting platform at its first Community Server Developers Conference in 2008, which was later renamed Harvest. It was one of the first analytics suites for enterprise collaboration software, and provides social analytics including sentiment analysis, social fingerprints, and buzz analysis on social networking sites such as Twitter. Telligent rebranded all of its products on June 23, 2009 at the Enterprise 2.0 conference when it launched its new Evolution platform product suite. Community Server became known as Telligent Community, Community Server Evolution became known as Telligent Enterprise and the underlying platform that both run on is now referred to as Telligent Evolution. The Social Analytics suite was renamed Telligent Analytics.

    Read more →
  • Comparison of vector graphics editors

    Comparison of vector graphics editors

    A number of vector graphics editors exist for various platforms. Potential users of these editors will make comparisons based on factors such as the availability for the user's platform, the software license, the feature set, the merits of the user interface (UI) and the focus of the program. Some programs are more suitable for artistic work while others are better for technical drawings. Another important factor is the application's support of various vector and bitmap image formats for import and export. The tables in this article compare general and technical information for a number of vector graphics editors. See the article on each editor for further information. This article is neither all-inclusive nor necessarily up-to-date. == Some editors in detail == Adobe Fireworks (formerly Macromedia Fireworks) is a vector editor with bitmap editing capabilities with its main purpose being the creation of graphics for Web and screen. Fireworks supports RGB color scheme and has no CMYK support. This means it is mostly used for screen design. The native Fireworks file format is editable PNG (FWPNG or PNG). Adobe Fireworks has a competitive price, but its features can seem limited in comparison with other products. It is easier to learn than other products and can produce complex vector artwork. The Fireworks editable PNG file format is not supported by other Adobe products. Fireworks can manage the PSD and AI file formats which enables it to be integrated with other Adobe apps. Fireworks can also open FWPNG/PNG, PSD, AI, EPS, JPG, GIF, BMP, TIFF file formats, and save/export to FWPNG/PNG, PSD, AI (v.8), FXG (v.2.0), JPG, GIF, PDF, SWF and some others. Some support for exporting to SVG is available via a free Export extension. On May 6, 2013, Adobe announced that Fireworks would be phased out. Adobe Flash (formerly a Macromedia product) has straightforward vector editing tools that make it easier for designers and illustrators to use. The most important of these tools are vector lines and fills with bitmap-like selectable areas, simple modification of curves via the "selection" or the control points/handles through "direct selection" tools. Flash uses Actionscript for OOP, and has full XML functionality through E4X support. Adobe FreeHand (formerly Macromedia Freehand and Aldus Freehand) is mainly used by professional graphic designers. The functionality of FreeHand includes the flexibility of the application in the wide design environment, catering to the output needs of both traditional image reproduction methods and to contemporary print and digital media with its page-layout capabilities and text attribute controls. Specific functions of FreeHand include a superior image-tracing operation for vector editing, page layout features within multiple-page documents, and embedding custom print-settings (such as variable halftone-screen specifications within a single graphic, etc.) to each document independent of auxiliary printer-drivers. User-operation is considered to be more suited for designers with an artistic background compared to designers with a technical background. When being marketed, FreeHand lacked the promotional backing, development and PR support in comparison to other similar products. FreeHand was transferred to the classic print group after Macromedia was purchased by Adobe in 2005. On May 16, 2007, Adobe announced that no further updates to Freehand would be developed but continues to sell FreeHand MX as a Macromedia product. FreeHand continues to run on Mac OS X Snow Leopard (using an Adobe fix) and on Windows 7. For macOS, Affinity Designer is able to open version 10 & MX Freehand files. Adobe Illustrator is a commonly used editor because of Adobe's market dominance, but is more expensive than other similar products. It is primarily developed consistently in line with other Adobe products and is best integrated with Adobe's Creative Suite packages. The ai file format is proprietary, but some vector editors can open and save in that format. Illustrator imports over two dozen formats, including PSD, PDF and SVG, and exports AI, PDF, SVG, SVGZ, GIF, JPG, PNG, WBMP, and SWF. However, the user must be aware of unchecking the "Preserve Illustrator Editing Capabilities" option if generating interoperable SVG files is desired. Affinity Designer by Serif Europe (the successor to their previous product, DrawPlus) is non-subscription-based software that is often described as an alternative to Adobe Illustrator. The application can open Portable Document Format (PDF), Adobe Photoshop, and Adobe Illustrator files, as well as export to those formats and to the Scalable Vector Graphics (SVG) and Encapsulated PostScript (EPS) formats. It also supports import from some Adobe Freehand files (specifically versions 10 & MX). Apache OpenOffice Draw is the vector graphics editor of the Apache OpenOffice open source office suite. It supports many import and export file formats and is available for multiple desktop operating systems. Boxy SVG is a chromium-based vector graphics editor for creating illustrations, as well as logos, icons, and other elements of graphic design. It is primarily focused on editing drawings in the SVG file format. The program is available as both a web app and a desktop application for Windows, macOS, ChromeOS, and Linux-based operating systems. Collabora Online Draw is the vector graphics editor of the Collabora Online open source office suite. It supports many import and export file formats and is accessible via any modern web browser, it also supports desktop editing features, Collabora Office is available for desktop and mobile operating systems, it is the enterprise ready version of LibreOffice. ConceptDraw PRO is a business diagramming tool and vector graphics editor available for both Windows and macOS. It supports multi-page documents, and includes an integrated presentation mode. ConceptDraw PRO supports imports and exports several formats, including Microsoft Visio and Microsoft PowerPoint. Corel Designer (originally Micrografx Designer) is one of the earliest vector-based graphics editors for the Microsoft Windows platform. The product is mainly used for the creation of engineering drawings and is shipped with extensive libraries for the needs of engineers. It is also flexible enough for most vector graphics design applications. CorelDRAW is an editor used in the graphic design, sign making and fashion design industries. CorelDRAW is capable of limited interoperation by reading file formats from Adobe Illustrator. CorelDRAW has over 50 import and export filters, on-screen and dialog box editing and the ability to create multi-page documents. It can also generate TrueType and Type 1 fonts, although refined typographic control is better suited to a more specific application. Some other features of CorelDRAW include the creation and execution of VBA macros, viewing of colour separations in print preview mode and integrated professional imposing options. Dia is a free and open-source diagramming and vector graphics editor available for Windows, Linux and other Unix-based computer operating systems. Dia has a modular design and several shape packages for flowcharting, network diagrams and circuit diagrams. Its design was inspired by Microsoft Visio, although it uses a Single Document Interface similar to other GNOME software (such as GIMP). DrawPlus, first built for the Windows platform in 1993, has matured into a full featured vector graphics editor for home and professional users. Also available as a feature-limited free 'starter edition': DrawPlus SE. DrawPlus developers, Serif Europe, have now ceased its development in order to focus on its successor, Affinity Designer. Edraw Max is a cross-platform diagram software and vector graphics editor available for Windows, Mac and Linux. It supports kinds of diagram types. It supports imports and exports SVG, PDF, HTML, Multiple page TIFF, Microsoft Visio and Microsoft PowerPoint. Embroidermodder is a free machine embroidery software tool that supports a variety of formats and allows the user to add custom modifications to their embroidery designs. Fatpaint is a free, light-weight, browser-based graphic design application with built-in vector drawing tools. It can be accessed through any browser with Flash 9 installed. Its integration with Zazzle makes it particularly suitable for people who want to create graphics for custom printed products such as T-shirts, mugs, iPhone cases, flyers and other promotional products. Figma is a collaborative web-based online vector graphics editor, used primarily for UX design and prototyping. GIMP, which works mainly with raster images, offers a limited set of features to create and record SVG files. It can also load and handle SVG files created with other software like Inkscape. Inkscape is a free and open-source vector editor with the primary native format being SVG. Inkscape is available for Linux, Windows, Mac OS X, and

    Read more →
  • FuseBase

    FuseBase

    FuseBase (previously Nimbus Note and Nimbus Platform) is a B2B SaaS platform. It is among the first to support the Model Context Protocol (MCP), an open standard enabling seamless integration of AI agents with external tools, systems, and data sources. == History == The platform was founded in 2014 as Nimbus Note, the platform started as a cross-platform note-taking and information management tool. As it evolved into Nimbus Platform, it added project management and client portal capabilities. In 2023, the company rebranded as FuseBase, pivoting to connect and automate both internal and external collaboration through AI Agents and cutting-edge protocol adoption like MCP. At the same time, FuseBase was named Product of the Year on Product Hunt. == Technical overview == The platform integrates the Model Context Protocol (MCP), an open-source framework created by Anthropic. MCP allows AI models to securely access and interact with external data, tools, and systems. This enables FuseBase AI Agents to gather relevant context, perform actions, and provide more advanced automation.

    Read more →