AI For Business Research

AI For Business Research — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Charge-coupled device

A charge-coupled device (CCD) is an integrated circuit containing an array of linked, or coupled, capacitors. Under the control of an external circuit, each capacitor can transfer its electric charge to a neighboring capacitor. CCD sensors are a major technology used in digital imaging. In a CCD image sensor, pixels are represented by p-doped metal–oxide–semiconductor (MOS) capacitors. These MOS capacitors, the basic building blocks of a CCD, are biased above the threshold for inversion when image acquisition begins, allowing the conversion of incoming photons into electron charges at the semiconductor-oxide interface; the CCD is then used to read out these charges. Although CCDs are not the only technology to allow for light detection, CCD image sensors are widely used in professional, medical, and scientific applications where high-quality image data are required. In applications with less exacting quality demands, such as consumer and professional digital cameras, active pixel sensors, also known as CMOS sensors (complementary MOS sensors), are generally used. However, the large quality advantage CCDs enjoyed early on has narrowed over time and since the late 2010s CMOS sensors are the dominant technology, having largely if not completely replaced CCD image sensors. == History == The basis for the CCD is the metal–oxide–semiconductor (MOS) structure, with MOS capacitors being the basic building blocks of a CCD, and a depleted MOS structure used as the photodetector in early CCD devices. In the late 1960s, Willard Boyle and George E. Smith at Bell Labs were researching MOS technology while working on semiconductor bubble memory. They realized that an electric charge was the analog of the magnetic bubble and that it could be stored on a tiny MOS capacitor. As it was fairly straightforward to fabricate a series of MOS capacitors in a row, they connected a suitable voltage to them so that the charge could be stepped along from one to the next. This led to the invention of the charge-coupled device by Boyle and Smith in 1969. They conceived of the design of what they termed, in their notebook, "Charge 'Bubble' Devices". The initial paper describing the concept in April 1970 listed possible uses as memory, a delay line, and an imaging device. The device could also be used as a shift register. The essence of the design was the ability to transfer charge along the surface of a semiconductor from one storage capacitor to the next. The first experimental device demonstrating the principle was a row of closely spaced metal squares on an oxidized silicon surface electrically accessed by wire bonds. It was demonstrated by Gil Amelio, Michael Francis Tompsett and George Smith in April 1970. This was the first experimental application of the CCD in image sensor technology, and used a depleted MOS structure as the photodetector. The first patent (U.S. patent 4,085,456) on the application of CCDs to imaging was assigned to Tompsett, who filed the application in 1971. The first working CCD made with integrated circuit technology was a simple 8-bit shift register, reported by Tompsett, Amelio and Smith in August 1970. This device had input and output circuits and was used to demonstrate its use as a shift register and as a crude eight pixel linear imaging device. Development of the device progressed at a rapid rate. By 1971, Bell researchers led by Michael Tompsett were able to capture images with simple linear devices. Several companies, including Fairchild Semiconductor, RCA and Texas Instruments, picked up on the invention and began development programs. Fairchild's effort, led by ex-Bell researcher Gil Amelio, was the first with commercial devices, and by 1974 had a linear 500-element device and a 2D 100 × 100 pixel device. Peter L. P. Dillon, a scientist at Kodak Research Labs, invented the first color CCD image sensor by overlaying a color filter array on this Fairchild 100 x 100 pixel Interline CCD starting in 1974. Steven Sasson, an electrical engineer working for the Kodak Apparatus Division, invented a digital still camera using this same Fairchild 100 × 100 CCD in 1975. The interline transfer (ILT) CCD device was proposed by L. Walsh and R. Dyck at Fairchild in 1973 to reduce smear and eliminate a mechanical shutter. To further reduce smear from bright light sources, the frame-interline-transfer (FIT) CCD architecture was developed by K. Horii, T. Kuroda and T. Kunii at Matsushita (now Panasonic) in 1981. The first KH-11 KENNEN reconnaissance satellite equipped with charge-coupled device array (800 × 800 pixels) technology for imaging was launched in December 1976. Under the leadership of Kazuo Iwama, Sony started a large development effort on CCDs involving a significant investment. Eventually, Sony managed to mass-produce CCDs for their camcorders. Before this happened, Iwama died in August 1982. Subsequently, a CCD chip was placed on his tombstone to acknowledge his contribution. The first mass-produced consumer CCD video camera, the CCD-G5, was released by Sony in 1983, based on a prototype developed by Yoshiaki Hagiwara in 1981. Early CCD sensors suffered from shutter lag. This was largely resolved with the invention of the pinned photodiode (PPD). It was invented by Nobukazu Teranishi, Hiromitsu Shiraki and Yasuo Ishihara at NEC in 1980. They recognized that lag can be eliminated if the signal carriers could be transferred from the photodiode to the CCD. This led to their invention of the pinned photodiode, a photodetector structure with low lag, low noise, high quantum efficiency and low dark current. It was first publicly reported by Teranishi and Ishihara with A. Kohono, E. Oda and K. Arai in 1982, with the addition of an anti-blooming structure. The new photodetector structure invented at NEC was given the name "pinned photodiode" (PPD) by B.C. Burkey at Kodak in 1984. In 1987, the PPD began to be incorporated into most CCD devices, becoming a fixture in consumer electronic video cameras and then digital still cameras. Since then, the PPD has been used in nearly all CCD sensors and then CMOS sensors. In January 2006, Boyle and Smith were awarded the National Academy of Engineering Charles Stark Draper Prize, and in 2009 they were awarded the Nobel Prize for Physics for their invention of the CCD concept. Michael Tompsett was awarded the 2010 National Medal of Technology and Innovation, for pioneering work and electronic technologies including the design and development of the first CCD imagers. He was also awarded the 2012 IEEE Edison Medal for "pioneering contributions to imaging devices including CCD Imagers, cameras and thermal imagers". == Basics of operation == In a CCD for capturing images, there is a photoactive region (an epitaxial layer of silicon), and a transmission region made out of a shift register (the CCD, properly speaking). An image is projected through a lens onto the capacitor array (the photoactive region), causing each capacitor to accumulate an electric charge proportional to the light intensity at that location. A one-dimensional array, used in line-scan cameras, captures a single slice of the image, whereas a two-dimensional array, used in video and still cameras, captures a two-dimensional picture corresponding to the scene projected onto the focal plane of the sensor. Once the array has been exposed to the image, a control circuit causes each capacitor to transfer its contents to its neighbor (operating as a shift register). The last capacitor in the array dumps its charge into a charge amplifier, which converts the charge into a voltage. By repeating this process, the controlling circuit converts the entire contents of the array in the semiconductor to a sequence of voltages. In a digital device, these voltages are then sampled, digitized, and usually stored in memory; in an analog device (such as an analog video camera), they are processed into a continuous analog signal (e.g. by feeding the output of the charge amplifier into a low-pass filter), which is then processed and fed out to other circuits for transmission, recording, or other processing. == Detailed physics of operation == === Charge generation === Before the MOS capacitors are exposed to light, they are biased into the depletion region; in n-channel CCDs, the silicon under the bias gate is slightly p-doped or intrinsic. The gate is then biased at a positive potential, above the threshold for strong inversion, which will eventually result in the creation of an n channel below the gate as in a MOSFET. However, it takes time to reach this thermal equilibrium: up to hours in high-end scientific cameras cooled at low temperature. Initially after biasing, the holes are pushed far into the substrate, and no mobile electrons are at or near the surface; the CCD thus operates in a non-equilibrium state called deep depletion. Then, when electron–hole pairs are generated in the depletion region, they are separated by the electric field, the elec
Read more →
Dynamic epistemic logic

Dynamic epistemic logic (DEL) is a logical framework dealing with knowledge and information change. Typically, DEL focuses on situations involving multiple agents and studies how their knowledge changes when events occur. These events can change factual properties of the actual world (they are called ontic events): for example a red card is painted in blue. They can also bring about changes of knowledge without changing factual properties of the world (they are called epistemic events): for example, a card is revealed publicly (or privately) to be red. Originally, DEL focused on epistemic events. Only some of the basic ideas are present in this entry of the original DEL framework; more details about DEL in general can be found in the references. Due to the nature of its object of study and its abstract approach, DEL is related and has applications to numerous research areas, such as computer science (artificial intelligence), philosophy (formal epistemology), economics (game theory) and cognitive science. In computer science, DEL is for example very much related to multi-agent systems, which are systems where multiple intelligent agents interact and exchange information. As a combination of dynamic logic and epistemic logic, dynamic epistemic logic is a young field of research. It really started in 1989 with Plaza's logic of public announcement. Independently, Gerbrandy and Groeneveld proposed a system dealing moreover with private announcement and that was inspired by the work of Veltman. Another system was proposed by van Ditmarsch whose main inspiration was the Cluedo game. But the most influential and original system was the system proposed by Baltag, Moss and Solecki. This system can deal with all the types of situations studied in the works above and its underlying methodology is conceptually grounded. This entry will present some of its basic ideas. Formally, DEL extends ordinary epistemic logic by the inclusion of event models to describe actions, and a product update operator that defines how epistemic models are updated as the consequence of executing actions described through event models. Epistemic logic will first be recalled. Then, actions and events will enter into the picture and we will introduce the DEL framework. == Epistemic logic == Epistemic logic is a modal logic dealing with the notions of knowledge and belief. As a logic, it is concerned with understanding the process of reasoning about knowledge and belief: which principles relating the notions of knowledge and belief are intuitively plausible? Like epistemology, it stems from the Greek word ϵ π ι σ τ η μ η {\displaystyle \epsilon \pi \iota \sigma \tau \eta \mu \eta } or ‘episteme’ meaning knowledge. Epistemology is nevertheless more concerned with analyzing the very nature and scope of knowledge, addressing questions such as “What is the definition of knowledge?” or “How is knowledge acquired?”. In fact, epistemic logic grew out of epistemology in the Middle Ages thanks to the efforts of Burley and Ockham. The formal work, based on modal logic, that inaugurated contemporary research into epistemic logic dates back only to 1962 and is due to Hintikka. It then sparked in the 1960s discussions about the principles of knowledge and belief and many axioms for these notions were proposed and discussed. For example, the interaction axioms K p → B p {\displaystyle Kp\rightarrow Bp} and B p → K B p {\displaystyle Bp\rightarrow KBp} are often considered to be intuitive principles: if an agent Knows p {\displaystyle p} then (s)he also Believes p {\displaystyle p} , or if an agent Believes p {\displaystyle p} , then (s)he Knows that (s)he Believes p {\displaystyle p} . More recently, these kinds of philosophical theories were taken up by researchers in economics, artificial intelligence and theoretical computer science where reasoning about knowledge is a central topic. Due to the new setting in which epistemic logic was used, new perspectives and new features such as computability issues were then added to the research agenda of epistemic logic. === Syntax === In the sequel, A G T S = { 1 , … , n } {\displaystyle AGTS=\{1,\ldots ,n\}} is a finite set whose elements are called agents and P R O P {\displaystyle PROP} is a set of propositional letters. The epistemic language is an extension of the basic multi-modal language of modal logic with a common knowledge operator C A {\displaystyle C_{A}} and a distributed knowledge operator D A {\displaystyle D_{A}} . Formally, the epistemic language L EL C {\displaystyle {\mathcal {L}}_{\textsf {EL}}^{C}} is defined inductively by the following grammar in BNF: L EL C : ϕ ::= p ∣ ¬ ϕ ∣ ( ϕ ∧ ϕ ) ∣ K j ϕ ∣ C A ϕ ∣ D A ϕ {\displaystyle {\mathcal {L}}_{\textsf {EL}}^{C}:\phi ~~::=~~p~\mid ~\neg \phi ~\mid ~(\phi \land \phi )~\mid ~K_{j}\phi ~\mid ~C_{A}\phi ~\mid ~D_{A}\phi } where p ∈ P R O P {\displaystyle p\in PROP} , j ∈ A G T S {\displaystyle j\in {AGTS}} and A ⊆ A G T S {\displaystyle A\subseteq {AGTS}} . The basic epistemic language L E L {\displaystyle {\mathcal {L}}_{EL}} is the language L E L C {\displaystyle {\mathcal {L}}_{EL}^{C}} without the common knowledge and distributed knowledge operators. The formula ⊥ {\displaystyle \bot } is an abbreviation for ¬ p ∧ p {\displaystyle \neg p\land p} (for a given p ∈ P R O P {\displaystyle p\in PROP} ), ⟨ K j ⟩ ϕ {\displaystyle \langle K_{j}\rangle \phi } is an abbreviation for ¬ K j ¬ ϕ {\displaystyle \neg K_{j}\neg \phi } , E A ϕ {\displaystyle E_{A}\phi } is an abbreviation for ⋀ j ∈ A K j ϕ {\displaystyle \bigwedge \limits _{j\in A}K_{j}\phi } and C ϕ {\displaystyle C\phi } an abbreviation for C A G T S ϕ {\displaystyle C_{AGTS}\phi } . Group notions: general, common and distributed knowledge. In a multi-agent setting there are three important epistemic concepts: general knowledge, distributed knowledge and common knowledge. The notion of common knowledge was first studied by Lewis in the context of conventions. It was then applied to distributed systems and to game theory, where it allows to express that the rationality of the players, the rules of the game and the set of players are commonly known. General knowledge. General knowledge of ϕ {\displaystyle \phi } means that everybody in the group of agents A G T S {\displaystyle {AGTS}} knows that ϕ {\displaystyle \phi } . Formally, this corresponds to the following formula: E ϕ := ⋀ j ∈ A G T S K j ϕ . {\displaystyle E\phi :={\underset {j\in {AGTS}}{\bigwedge }}K_{j}\phi .} Common knowledge. Common knowledge of ϕ {\displaystyle \phi } means that everybody knows ϕ {\displaystyle \phi } but also that everybody knows that everybody knows ϕ {\displaystyle \phi } , that everybody knows that everybody knows that everybody knows ϕ {\displaystyle \phi } , and so on ad infinitum. Formally, this corresponds to the following formula C ϕ := E ϕ ∧ E E ϕ ∧ E E E ϕ ∧ … {\displaystyle C\phi :=E\phi \land EE\phi \land EEE\phi \land \ldots } As we do not allow infinite conjunction the notion of common knowledge will have to be introduced as a primitive in our language. Before defining the language with this new operator, we are going to give an example introduced by Lewis that illustrates the difference between the notions of general knowledge and common knowledge. Lewis wanted to know what kind of knowledge is needed so that the statement p {\displaystyle p} : “every driver must drive on the right” be a convention among a group of agents. In other words, he wanted to know what kind of knowledge is needed so that everybody feels safe to drive on the right. Suppose there are only two agents i {\displaystyle i} and j {\displaystyle j} . Then everybody knowing p {\displaystyle p} (formally E p {\displaystyle Ep} ) is not enough. Indeed, it might still be possible that the agent i {\displaystyle i} considers possible that the agent j {\displaystyle j} does not know p {\displaystyle p} (formally ¬ K i K j p {\displaystyle \neg K_{i}K_{j}p} ). In that case the agent i {\displaystyle i} will not feel safe to drive on the right because he might consider that the agent j {\displaystyle j} , not knowing p {\displaystyle p} , could drive on the left. To avoid this problem, we could then assume that everybody knows that everybody knows that p {\displaystyle p} (formally E E p {\displaystyle EEp} ). This is again not enough to ensure that everybody feels safe to drive on the right. Indeed, it might still be possible that agent i {\displaystyle i} considers possible that agent j {\displaystyle j} considers possible that agent i {\displaystyle i} does not know p {\displaystyle p} (formally ¬ K i K j K i p {\displaystyle \neg K_{i}K_{j}K_{i}p} ). In that case and from i {\displaystyle i} ’s point of view, j {\displaystyle j} considers possible that i {\displaystyle i} , not knowing p {\displaystyle p} , will drive on the left. So from i {\displaystyle i} ’s point of view, j {\displaystyle j} might drive on the left as well (by the same argument as abov
Read more →
Computational heuristic intelligence

Computational heuristic intelligence (CHI) refers to specialized programming techniques in computational intelligence (also called artificial intelligence, or AI). These techniques have the express goal of avoiding complexity issues, also called NP-hard problems, by using human-like techniques. They are best summarized as the use of exemplar-based methods (heuristics), rather than rule-based methods (algorithms). Hence the term is distinct from the more conventional computational algorithmic intelligence, or symbolic AI. An example of a CHI technique is the encoding specificity principle of Tulving and Thompson. In general, CHI principles are problem solving techniques used by people, rather than programmed into machines. It is by drawing attention to this key distinction that the use of this term is justified in a field already replete with confusing neologisms. Note that the legal systems of all modern human societies employ both heuristics (generalisations of cases) from individual trial records as well as legislated statutes (rules) as regulatory guides. Another recent approach to the avoidance of complexity issues is to employ feedback control rather than feedforward modeling as a problem-solving paradigm. This approach has been called computational cybernetics, because (a) the term 'computational' is associated with conventional computer programming techniques which represent a strategic, compiled, or feedforward model of the problem, and (b) the term 'cybernetic' is associated with conventional system operation techniques which represent a tactical, interpreted, or feedback model of the problem. Of course, real programs and real problems both contain both feedforward and feedback components. A real example which illustrates this point is that of human cognition, which clearly involves both perceptual (bottom-up, feedback, sensor-oriented) and conceptual (top-down, feedforward, motor-oriented) information flows and hierarchies. The AI engineer must choose between mathematical and cybernetic problem solution and machine design paradigms. This is not a coding (program language) issue, but relates to understanding the relationship between the declarative and procedural programming paradigms. The vast majority of STEM professionals never get the opportunity to design or implement pure cybernetic solutions. When pushed, most responders will dismiss the importance of any difference by saying that all code can be reduced to a mathematical model anyway. Unfortunately, not only is this belief false, it fails most spectacularly in many AI scenarios. Mathematical models are not time agnostic, but by their very nature are pre-computed, i.e. feedforward. Dyer [2012] and Feldman [2004] have independently investigated the simplest of all somatic governance paradigms, namely control of a simple jointed limb by a single flexor muscle. They found that it is impossible to determine forces from limb positions- therefore, the problem cannot have a pre-computed (feedforward) mathematical solution. Instead, a top-down command bias signal changes the threshold feedback level in the sensorimotor loop, e.g. the loop formed by the afferent and efferent nerves, thus changing the so-called ‘equilibrium point’ of the flexor muscle/ elbow joint system. An overview of the arrangement reveals that global postures and limb position are commanded in feedforward terms, using global displacements (common coding), with the forces needed being computed locally by feedback loops. This method of sensorimotor unit governance, which is based upon what Anatol Feldman calls the ‘equilibrium Point’ theory, is formally equivalent to a servomechanism such as a car's ‘cruise control’.
Read more →
Algorithmic bias

Algorithmic bias describes systematic and repeatable harmful tendency in a computerized sociotechnical system to create "unfair" outcomes, such as "privileging" one category over another in ways that may or may not be different from the intended function of the algorithm. Bias can emerge from many factors, including intentionally biased design decisions or the unintended or unanticipated use or decisions relating to the way data is coded, collected, selected or used to train the algorithm. For example, algorithmic bias has been observed in search engine results and social media platforms. This bias can have impacts ranging from privacy violations to reinforcing social biases of race, gender, sexuality, and ethnicity. The study of algorithmic bias is most concerned with algorithms that reflect "systematic and unfair" discrimination. This bias has only recently been addressed in legal frameworks, such as the European Union's General Data Protection Regulation (enforced in 2018) and the Artificial Intelligence Act (proposed in 2021 and adopted in 2024). As algorithms expand their ability to organize society, politics, institutions, and behavior, sociologists have become concerned with the ways in which unanticipated output and manipulation of data can impact the physical world. Because algorithms are often considered to be neutral and unbiased, they can inaccurately project greater authority than human expertise (in part due to the psychological phenomenon of automation bias), and in some cases, reliance on algorithms can displace human responsibility for their outcomes, without last mile thinking. Bias can enter into algorithmic systems as a result of pre-existing cultural, social, or institutional expectations; by how features and labels are chosen; because of technical limitations of their design; or by being used in unanticipated contexts or by audiences who are not considered in the software's initial design. Algorithmic bias has been cited in cases ranging from election outcomes to the spread of online hate speech. It has also arisen in criminal justice, healthcare, and hiring, compounding existing racial, socioeconomic, and gender biases. The relative inability of facial recognition technology to accurately identify darker-skinned faces has been linked to multiple wrongful arrests of black men, an issue stemming from imbalanced datasets. Problems in understanding, researching, and discovering algorithmic bias persist due to the proprietary nature of algorithms, which are typically treated as trade secrets. Even when full transparency is provided, the complexity of certain algorithms poses a barrier to understanding their functioning. Furthermore, algorithms may change, or respond to input or output in ways that cannot be anticipated or easily reproduced for analysis. In many cases, even within a single website or application, there is no single "algorithm" to examine, but a network of many interrelated programs and data inputs, even between users of the same service. A 2021 survey identified multiple forms of algorithmic bias, including historical, representation, and measurement biases, each of which can contribute to unfair outcomes. == Definitions == Algorithms are difficult to define, but may be generally understood as lists of instructions that determine how programs read, collect, process, and analyze data to generate a usable output. For a rigorous technical introduction, see Algorithms. Advances in computer hardware and software have led to an increased capability to process, store and transmit data. This has in turn made the design and adoption of technologies such as machine learning and artificial intelligence technically and commercially feasible. By analyzing and processing data, algorithms are the backbone of search engines, social media websites, recommendation engines, online retail, online advertising, and more. Contemporary social scientists are concerned with algorithmic processes embedded into hardware and software applications because of their political and social impact, and question the underlying assumptions of an algorithm's neutrality. The term algorithmic bias describes systematic and repeatable errors that create unfair outcomes, such as privileging one arbitrary group of users over others. For example, a credit score algorithm may deny a loan without being unfair, if it is consistently weighing relevant financial criteria. If the algorithm recommends loans to one group of users, but denies loans to another set of nearly identical users based on unrelated criteria, and if this behavior can be repeated across multiple occurrences, an algorithm can be described as biased. This bias may be intentional or unintentional (for example, it can come from biased data obtained from a worker that previously did the job the algorithm is going to do from now on). == Methods == Bias can be introduced to an algorithm in several ways. During the assemblage of a dataset, data may be collected, digitized, adapted, and entered into a database according to human-designed cataloging criteria. Next, programmers assign priorities, or hierarchies, for how a program assesses and sorts that data. This requires human decisions about how data is categorized, and which data is included or discarded. Some algorithms collect their own data based on human-selected criteria, which can also reflect the bias of human designers. Other algorithms may reinforce stereotypes and preferences as they process and display "relevant" data for human users, for example, by selecting information based on previous choices of a similar user or group of users. Beyond assembling and processing data, bias can emerge as a result of design. For example, algorithms that determine the allocation of resources or scrutiny (such as determining school placements) may inadvertently discriminate against a category when determining risk based on similar users (as in credit scores). Meanwhile, recommendation engines that work by associating users with similar users, or that make use of inferred marketing traits, might rely on inaccurate associations that reflect broad ethnic, gender, socio-economic, or racial stereotypes. Another example comes from determining criteria for what is included and excluded from results. These criteria could present unanticipated outcomes for search results, such as with flight-recommendation software that omits flights that do not follow the sponsoring airline's flight paths. Algorithms may also display an uncertainty bias, offering more confident assessments when larger data sets are available. This can skew algorithmic processes toward results that more closely correspond with larger samples, which may disregard data from underrepresented populations. == History == === Early critiques === The earliest computer programs were designed to mimic human reasoning and deductions, and were deemed to be functioning when they successfully and consistently reproduced that human logic. In his 1976 book Computer Power and Human Reason, artificial intelligence pioneer Joseph Weizenbaum suggested that bias could arise both from the data used in a program, but also from the way a program is coded. Weizenbaum wrote that programs are a sequence of rules created by humans for a computer to follow. By following those rules consistently, such programs "embody law", that is, enforce a specific way to solve problems. The rules a computer follows are based on the assumptions of a computer programmer for how these problems might be solved. That means the code could incorporate the programmer's imagination of how the world works, including their biases and expectations. While a computer program can incorporate bias in this way, Weizenbaum also noted that any data fed to a machine additionally reflects "human decision making processes" as data is being selected. Finally, he noted that machines might also transfer good information with unintended consequences if users are unclear about how to interpret the results. Weizenbaum warned against trusting decisions made by computer programs that a user doesn't understand, comparing such faith to a tourist who can find his way to a hotel room exclusively by turning left or right on a coin toss. Crucially, the tourist has no basis of understanding how or why he arrived at his destination, and a successful arrival does not mean the process is accurate or reliable. An early example of algorithmic bias resulted in as many as 60 women and ethnic minorities denied entry to St. George's Hospital Medical School per year from 1982 to 1986, based on implementation of a new computer-guidance assessment system that denied entry to women and men with "foreign-sounding names" based on historical trends in admissions. While many schools at the time employed similar biases in their selection process, St. George was most notable for automating said bias through the use of an algorithm, thus gaining the attention of people on a much
Read more →
Deep Learning Indaba

The Deep Learning Indaba is an annual conference and educational event that aims to strengthen machine learning and artificial intelligence (AI) capacity across Africa. Launched in 2017, it brings together students, researchers, industry practitioners, and policymakers from across the African continent. == History == The Deep Learning Indaba began in 2017 at the University of the Witwatersrand with over 300 participants from 23 African countries, offering tutorials in advanced AI topics and featuring notable speakers like Nando de Freitas. In 2018, it expanded to 650 delegates at Stellenbosch University, introducing parallel sessions to encourage collaboration. The 2019 edition in Nairobi, Kenya, reflected further growth, with increasing sponsorship and support from major tech companies like Google and Microsoft. === Deep Learning IndabaX ===
Read more →
Semantic analysis (machine learning)

In machine learning, semantic analysis of a text corpus is the task of building structures that approximate concepts from a large set of documents. It generally does not involve prior semantic understanding of the documents. Semantic analysis strategies include: Metalanguages based on first-order logic, which can analyze the speech of humans. Understanding the semantics of a text is symbol grounding: if language is grounded, it is equal to recognizing a machine-readable meaning. For the restricted domain of spatial analysis, a computer-based language understanding system was demonstrated. Latent semantic analysis (LSA), a class of techniques where documents are represented as vectors in a term space. A prominent example is probabilistic latent semantic analysis (PLSA). Latent Dirichlet allocation, which involves attributing document terms to topics. n-grams and hidden Markov models, which work by representing the term stream as a Markov chain, in which each term is derived from preceding terms. == Stochastic semantic analysis ==
Read more →
Bayesian programming

Bayesian programming is a formalism and a methodology for having a technique to specify probabilistic models and solve problems when less than the necessary information is available. Edwin T. Jaynes proposed that probability could be considered as an alternative and an extension of logic for rational reasoning with incomplete and uncertain information. In his founding book Probability Theory: The Logic of Science he developed this theory and proposed what he called "the robot," which was not a physical device, but an inference engine to automate probabilistic reasoning—a kind of Prolog for probability instead of logic. Bayesian programming is a formal and concrete implementation of this "robot". Bayesian programming may also be seen as an algebraic formalism to specify graphical models such as, for instance, Bayesian networks, dynamic Bayesian networks, Kalman filters or hidden Markov models. Indeed, Bayesian programming is more general than Bayesian networks and has a power of expression equivalent to probabilistic factor graphs. == Formalism == A Bayesian program is a means of specifying a family of probability distributions. The constituent elements of a Bayesian program are presented below: Program { Description { Specification ( π ) { Variables Decomposition Forms Identification (based on δ ) Question {\displaystyle {\text{Program}}{\begin{cases}{\text{Description}}{\begin{cases}{\text{Specification}}(\pi ){\begin{cases}{\text{Variables}}\\{\text{Decomposition}}\\{\text{Forms}}\\\end{cases}}\\{\text{Identification (based on }}\delta )\end{cases}}\\{\text{Question}}\end{cases}}} A program is constructed from a description and a question. A description is constructed using some specification ( π {\displaystyle \pi } ) as given by the programmer and an identification or learning process for the parameters not completely specified by the specification, using a data set ( δ {\displaystyle \delta } ). A specification is constructed from a set of pertinent variables, a decomposition and a set of forms. Forms are either parametric forms or questions to other Bayesian programs. A question specifies which probability distribution has to be computed. === Description === The purpose of a description is to specify an effective method of computing a joint probability distribution on a set of variables { X 1 , X 2 , ⋯ , X N } {\displaystyle \left\{X_{1},X_{2},\cdots ,X_{N}\right\}} given a set of experimental data δ {\displaystyle \delta } and some specification π {\displaystyle \pi } . This joint distribution is denoted as: P ( X 1 ∧ X 2 ∧ ⋯ ∧ X N ∣ δ ∧ π ) {\displaystyle P\left(X_{1}\wedge X_{2}\wedge \cdots \wedge X_{N}\mid \delta \wedge \pi \right)} . To specify preliminary knowledge π {\displaystyle \pi } , the programmer must undertake the following: Define the set of relevant variables { X 1 , X 2 , ⋯ , X N } {\displaystyle \left\{X_{1},X_{2},\cdots ,X_{N}\right\}} on which the joint distribution is defined. Decompose the joint distribution (break it into relevant independent or conditional probabilities). Define the forms of each of the distributions (e.g., for each variable, one of the list of probability distributions). ==== Decomposition ==== Given a partition of { X 1 , X 2 , … , X N } {\displaystyle \left\{X_{1},X_{2},\ldots ,X_{N}\right\}} containing K {\displaystyle K} subsets, K {\displaystyle K} variables are defined L 1 , ⋯ , L K {\displaystyle L_{1},\cdots ,L_{K}} , each corresponding to one of these subsets. Each variable L k {\displaystyle L_{k}} is obtained as the conjunction of the variables { X k 1 , X k 2 , ⋯ } {\displaystyle \left\{X_{k_{1}},X_{k_{2}},\cdots \right\}} belonging to the k t h {\displaystyle k^{th}} subset. Recursive application of Bayes' theorem leads to: P ( X 1 ∧ X 2 ∧ ⋯ ∧ X N ∣ δ ∧ π ) = P ( L 1 ∧ ⋯ ∧ L K ∣ δ ∧ π ) = P ( L 1 ∣ δ ∧ π ) × P ( L 2 ∣ L 1 ∧ δ ∧ π ) × ⋯ × P ( L K ∣ L K − 1 ∧ ⋯ ∧ L 1 ∧ δ ∧ π ) {\displaystyle {\begin{aligned}&P\left(X_{1}\wedge X_{2}\wedge \cdots \wedge X_{N}\mid \delta \wedge \pi \right)\\={}&P\left(L_{1}\wedge \cdots \wedge L_{K}\mid \delta \wedge \pi \right)\\={}&P\left(L_{1}\mid \delta \wedge \pi \right)\times P\left(L_{2}\mid L_{1}\wedge \delta \wedge \pi \right)\times \cdots \times P\left(L_{K}\mid L_{K-1}\wedge \cdots \wedge L_{1}\wedge \delta \wedge \pi \right)\end{aligned}}} Conditional independence hypotheses then allow further simplifications. A conditional independence hypothesis for variable L k {\displaystyle L_{k}} is defined by choosing some variable X n {\displaystyle X_{n}} among the variables appearing in the conjunction L k − 1 ∧ ⋯ ∧ L 2 ∧ L 1 {\displaystyle L_{k-1}\wedge \cdots \wedge L_{2}\wedge L_{1}} , labelling R k {\displaystyle R_{k}} as the conjunction of these chosen variables and setting: P ( L k ∣ L k − 1 ∧ ⋯ ∧ L 1 ∧ δ ∧ π ) = P ( L k ∣ R k ∧ δ ∧ π ) {\displaystyle P\left(L_{k}\mid L_{k-1}\wedge \cdots \wedge L_{1}\wedge \delta \wedge \pi \right)=P\left(L_{k}\mid R_{k}\wedge \delta \wedge \pi \right)} We then obtain: P ( X 1 ∧ X 2 ∧ ⋯ ∧ X N ∣ δ ∧ π ) = P ( L 1 ∣ δ ∧ π ) × P ( L 2 ∣ R 2 ∧ δ ∧ π ) × ⋯ × P ( L K ∣ R K ∧ δ ∧ π ) {\displaystyle {\begin{aligned}&P\left(X_{1}\wedge X_{2}\wedge \cdots \wedge X_{N}\mid \delta \wedge \pi \right)\\={}&P\left(L_{1}\mid \delta \wedge \pi \right)\times P\left(L_{2}\mid R_{2}\wedge \delta \wedge \pi \right)\times \cdots \times P\left(L_{K}\mid R_{K}\wedge \delta \wedge \pi \right)\end{aligned}}} Such a simplification of the joint distribution as a product of simpler distributions is called a decomposition, derived using the chain rule. This ensures that each variable appears at the most once on the left of a conditioning bar, which is the necessary and sufficient condition to write mathematically valid decompositions. ==== Forms ==== Each distribution P ( L k ∣ R k ∧ δ ∧ π ) {\displaystyle P\left(L_{k}\mid R_{k}\wedge \delta \wedge \pi \right)} appearing in the product is then associated with either a parametric form (i.e., a function f μ ( L k ) {\displaystyle f_{\mu }\left(L_{k}\right)} ) or a question to another Bayesian program P ( L k ∣ R k ∧ δ ∧ π ) = P ( L ∣ R ∧ δ ^ ∧ π ^ ) {\displaystyle P\left(L_{k}\mid R_{k}\wedge \delta \wedge \pi \right)=P\left(L\mid R\wedge {\widehat {\delta }}\wedge {\widehat {\pi }}\right)} . When it is a form f μ ( L k ) {\displaystyle f_{\mu }\left(L_{k}\right)} , in general, μ {\displaystyle \mu } is a vector of parameters that may depend on R k {\displaystyle R_{k}} or δ {\displaystyle \delta } or both. Learning takes place when some of these parameters are computed using the data set δ {\displaystyle \delta } . An important feature of Bayesian programming is this capacity to use questions to other Bayesian programs as components of the definition of a new Bayesian program. P ( L k ∣ R k ∧ δ ∧ π ) {\displaystyle P\left(L_{k}\mid R_{k}\wedge \delta \wedge \pi \right)} is obtained by some inferences done by another Bayesian program defined by the specifications π ^ {\displaystyle {\widehat {\pi }}} and the data δ ^ {\displaystyle {\widehat {\delta }}} . This is similar to calling a subroutine in classical programming and provides an easy way to build hierarchical models. === Question === Given a description (i.e., P ( X 1 ∧ X 2 ∧ ⋯ ∧ X N ∣ δ ∧ π ) {\displaystyle P\left(X_{1}\wedge X_{2}\wedge \cdots \wedge X_{N}\mid \delta \wedge \pi \right)} ), a question is obtained by partitioning { X 1 , X 2 , ⋯ , X N } {\displaystyle \left\{X_{1},X_{2},\cdots ,X_{N}\right\}} into three sets: the searched variables, the known variables and the free variables. The 3 variables S e a r c h e d {\displaystyle Searched} , K n o w n {\displaystyle Known} and F r e e {\displaystyle Free} are defined as the conjunction of the variables belonging to these sets. A question is defined as the set of distributions: P ( S e a r c h e d ∣ Known ∧ δ ∧ π ) {\displaystyle P\left(Searched\mid {\text{Known}}\wedge \delta \wedge \pi \right)} made of many "instantiated questions" as the cardinal of K n o w n {\displaystyle Known} , each instantiated question being the distribution: P ( Searched ∣ Known ∧ δ ∧ π ) {\displaystyle P\left({\text{Searched}}\mid {\text{Known}}\wedge \delta \wedge \pi \right)} === Inference === Given the joint distribution P ( X 1 ∧ X 2 ∧ ⋯ ∧ X N ∣ δ ∧ π ) {\displaystyle P\left(X_{1}\wedge X_{2}\wedge \cdots \wedge X_{N}\mid \delta \wedge \pi \right)} , it is always possible to compute any possible question using the following general inference: P ( Searched ∣ Known ∧ δ ∧ π ) = ∑ Free [ P ( Searched ∧ Free ∣ Known ∧ δ ∧ π ) ] = ∑ Free [ P ( Searched ∧ Free ∧ Known ∣ δ ∧ π ) ] P ( Known ∣ δ ∧ π ) = ∑ Free [ P ( Searched ∧ Free ∧ Known ∣ δ ∧ π ) ] ∑ Free ∧ Searched [ P ( Searched ∧ Free ∧ Known ∣ δ ∧ π ) ] = 1 Z × ∑ Free [ P ( Searched ∧ Free ∧ Known ∣ δ ∧ π ) ] {\displaystyle {\begin{aligned}&P\left({\text{Searched}}\mid {\text{Known}}\wedge \delta \wedge \pi \right)\\={}&\sum _{\text{Free}}\left[P\left({\text{Searched}}\wedge {\text{Free}}\mid {\text{Known}}\wedge \delta \wedge \
Read more →
TinyML

TinyML (short for tiny machine learning) is an area of machine learning that focuses on deploying and running models on low-power, resource-constrained embedded systems such as microcontrollers and edge devices. TinyML supports on-device inference with low latency and minimal reliance on cloud connectivity, which makes it suitable for applications in the Internet of Things (IoT), wearable devices, and real-time systems. == History == The idea of running machine learning models on embedded systems has gained traction in the late 2010s, as model compression, quantization, and efficient neural network architectures progressed. The term TinyML was popularized in 2019 with the publication of the book TinyML by Pete Warden and Daniel Situnayake and the creation of the TinyML Foundation.
Read more →
VSCO

VSCO ( ), formerly known as VSCO Cam, is a photography mobile app available for iOS and Android devices. The app was created by Joel Flory and Greg Lutze. The VSCO app allows users to capture photos in the app and edit them, using preset filters and editing tools. == History == Visual Supply Company was founded by Joel Flory and Greg Lutze in California, in 2011. VSCO was launched in 2012. It raised $40 million from investors in May 2014. In 2017, VSCO launched a subscription model. As of 2018, Visual Supply Company has $90 million in funding from investors and over 2 million paying members. In 2019, VSCO acquired Rylo, a video editing startup founded by the original developer of Instagram’s Hyperlapse. Visual Supply Company has locations in Oakland, California, where it is headquartered, and Chicago, Illinois. In December 2020 VSCO acquired AI-powered video editing app Trash. In April 2018, VSCO reached over 30 million users. In September 2023, Eric Wittman was appointed as the new CEO and co-founder Joel Flory became executive chairman. == Usage == Users must register an account to use the app. Photos can be taken or imported from the camera roll, as well as short videos or animated GIFs (known in the app as DSCO; iOS only). The user can edit their photos through various preset filters, or through the "toolkit" feature which allows finer adjustments to fade, clarity, skin tone, tint, sharpness, saturation, contrast, temperature, exposure, and other properties. Users have the option of posting their photos to their profile, where they can also add captions and hashtags. Photos can also be exported back into the camera roll or shared with other social networking services. The users also have an option to edit their own videos from their camera roll with the VSCO yearly membership, but they are not able to post camera roll as VSCO Film X videos to their account on VSCO. JPEG and raw image files can be used. Research on image based social media platforms has found that engagement with posting, editing, and interacting with images can influence users' mood, self esteem, and body satisfaction. Studies also suggest that greater emotional investment in social media content is associated with increased negative psychological outcomes including stress and depressive symptoms. == In popular culture == VSCO's Oakland headquarters was a key filming location for Boots Riley's 2018 film Sorry to Bother You.
Read more →
Artificial intimacy

Artificial intimacy is a form of human-AI interaction in which an individual will form social connections, emotional bonds, or intimate relationships with various forms of artificial intelligence, including chatbots, virtual assistants, and other artificial entities. Artificially intimate relationships include not only romances, but parasocial relationships with virtual AI characters and the use of griefbots trained on a dead or otherwise lost individual. Artificial intimacy can arise because humans are prone to anthropomorphism. Responses from these AI models are often designed to simulate human interaction. Individuals experiencing artificial intimacy may exhibit attachment, love and commitment to certain AI models, akin to the bonds typically shared between humans. == Causes == === Perceived responsiveness === Robin Dunbar famously proposed that due to emergence of larger groups of humans, vocal communication and language in humans evolved to replace grooming as a means of bonding, arguing that language was a more efficient way to maintain and strengthen social bonds across wider social settings and networks. Further research in this field leads many psychologists to agree that social cognition, affiliative bonding and language in humans are deeply connected. The interpersonal model of intimacy considers communication to be key in affiliative bonding, suggesting that intimacy develops and deepens through open communication between partners in relationship. Specifically, when individuals communicate emotions and perceive their partner as responsive and caring, feelings of closeness and connection are enhanced, building intimacy. Social penetration theory also aligns with the idea of communication being central to intimacy, by explaining how interpersonal relationships develop through gradual increases in self-disclosure. When the benefits of emotional bonding outweigh the costs of vulnerability, individuals will partake in self-disclosure, opening up to one another. Thereby, the literature can be used to provide a proximate explanation for the emergence of artificial intimacy to understand how the phenomenon occurs. Artificial entities are able to mimic interpersonal communication between humans, which in turn can simulate sensations of intimacy within human users though a perceived sense of responsiveness. The relationship between human and AI does not come with the cost of vulnerability or social rejection, which may make self-disclosure easier than with other humans. Altogether, these factors may lead to the experience of anthropomorphism and formation of affiliative relationships. Skjuve et al's interview study on Replika chatbot users further aligns with this explanation, finding that users' perception of chatbots as "accepting, understanding and non-judgmental" facilitated relationship development between the AI and users, and the act of self-disclosure possibly strengthened relationships. Another study on Replika users' reviews and survey results found users perceived chatbots as emotional supportive companions. This evidence further suggests that the perception of artificial entities as capable of empathy and responsiveness in communication facilitate the development of intimate relationships between users and AI. === Loneliness and coping with negative emotions === Research has suggested that humans evolved social bonds as a result of evolutionary pressures that favored cooperation, information exchange and transmission, and group living. Many studies stress the presence of social bonds to be important for human living: research by Baumeister and Leary suggests that humans have a basic psychological need to form and maintain "strong, stable interpersonal relationships", and that a lack of social bonds or sense of belonging leads to negative psychological and physical outcomes. Eisenberger et al's study on the neuroimaging of brain activity suggests that human brains process social rejection and exclusion similarly to physical pain. Furthermore, Song et al's study found that lonely individuals tend to seek more connections in mediated environments, such as online platforms like Facebook. This was suggested to be as a means to reduce their offline loneliness from a lack of in-person interaction, while also fulfilling a need to communicate. Leading on from this, an ultimate explanation for why humans seek the perceived sense of connection from artificial intimacy is to fulfil an evolutionary need for bonding and belonging. Xie et al's study found loneliness to be a driving factor in chatbot interaction. Herbener and Damholdt's study on Danish high school students found that students who sought emotional support or engaged in reciprocal conversations with chatbots were significantly more lonely than their peers, perceived themselves as having less social support, and used the chatbots to cope with negative emotions. The aforementioned notion that chatbots were perceived to have a positive effect on users' negative emotions is also further supported by other studies. Skjuve et al's study found that chatbot relationships may have a positive effect on users' wellbeing. De Freitas et al ran several studies on the effect of chatbots on loneliness, consistently finding evidence suggesting that interaction with chatbots reduces loneliness in users: It was found that existing chatbot users used AI to alleviate loneliness, having an AI companion consistently reduced loneliness over the course of a week, and reductions in loneliness could be explained by chatbot performance—and specifically whether it was able to make users feel heard. Overall the evidence suggests an innate need for bonding evokes feelings of loneliness in users, who turn to artificial intimacy as a low-cost method alleviate these emotions. While many users report positive experiences, some researchers caution that pursuing artificial intimacy may lead to reduced social motivation, social substitution effects, withdrawal from real-life relationships and difficulty discerning reality from fantasy, which may increase longer-term loneliness and isolation. The long-term psychological and societal impacts remain under active investigation.
Read more →
Behavior informatics

Behavior informatics (BI) is the informatics of behaviors so as to obtain behavior intelligence and behavior insights. BI is a research method combining science and technology, specifically in the area of engineering. The purpose of BI includes analysis of current behaviors as well as the inference of future possible behaviors. This occurs through pattern recognition. Different from applied behavior analysis from the psychological perspective, BI builds computational theories, systems and tools to qualitatively and quantitatively model, represent, analyze, and manage behaviors of individuals, groups and/or organizations. BI is built on classic study of behavioral science, including behavior modeling, applied behavior analysis, behavior analysis, behavioral economics, and organizational behavior. Typical BI tasks consist of individual and group behavior formation, representation, computational modeling, analysis, learning, simulation, and understanding of behavior impact, utility, non-occurring behaviors, etc. for behavior intervention and management. The Behavior Informatics approach to data utilizes cognitive as well as behavioral data. By combining the data, BI has the potential to effectively illustrate the big picture when it comes to behavioral decisions and patterns. One of the goals of BI is also to be able to study human behavior while eliminating issues like self-report bias. This creates more reliable and valid information for research studies. == Behavior == From an Informatics perspective, a behavior consists of three key elements: actors (behavioral subjects and objects), operations (actions, activities) and interactions (relationships), and their properties. A behavior can be represented as a behavior vector, all behaviors of an actor or an actor group can be represented as behavior sequences and multi-dimensional behavior matrix. The following table explains some of the elements of behavior. Behavior Informatics takes into account behavior when analyzing business patterns and intelligence. The inclusion of behavior in these analyses provides prominent information on social and driving factors of patterns. == Applications == Behavior Informatics is being used in a variety of settings, including but not limited to health care management, telecommunications, marketing, and security. Behavior Informatics provides a manner in which to analyze and organize the many aspects that go into a person's health care needs and decisions. When it comes to business models, behavior informatics may be utilized for a similar role. Organizations implement behavior informatics to enhance business structure and regime, where it helps moderate ideal business decisions and situations.
Read more →
Automated machine learning

Automated machine learning (AutoML) is the process of automating the tasks of applying machine learning to real-world problems. It is the combination of automation and ML. AutoML potentially includes every stage from beginning with a raw dataset to building a machine learning model ready for deployment. AutoML was proposed as an artificial intelligence-based solution to the growing challenge of applying machine learning. The high degree of automation in AutoML aims to allow non-experts to make use of machine learning models and techniques without requiring them to become experts in machine learning. Automating the process of applying machine learning end-to-end additionally offers the advantages of producing simpler solutions, faster creation of those solutions, and models that often outperform hand-designed models. Common techniques used in AutoML include hyperparameter optimization, meta-learning and neural architecture search. == Comparison to the standard approach == In a typical machine learning application, practitioners have a set of input data points to be used for training. The raw data may not be in a form that all algorithms can be applied to. To make the data amenable for machine learning, an expert may have to apply appropriate data pre-processing, feature engineering, feature extraction, and feature selection methods. After these steps, practitioners must then perform algorithm selection and hyperparameter optimization to maximize the predictive performance of their model. If deep learning is used, the architecture of the neural network must also be chosen manually by the machine learning expert. Each of these steps may be challenging, resulting in significant hurdles to using machine learning. AutoML aims to simplify these steps for non-experts, and to make it easier for them to use machine learning techniques correctly and effectively. AutoML plays an important role within the broader approach of automating data science, which also includes challenging tasks such as data engineering, data exploration and model interpretation and prediction. == Targets of automation == Automated machine learning can target various stages of the machine learning process. Steps to automate are: Data preparation and ingestion (from raw data and miscellaneous formats) Column type detection; e.g., Boolean, discrete numerical, continuous numerical, or text Column intent detection; e.g., target/label, stratification field, numerical feature, categorical text feature, or free text feature Task detection; e.g., binary classification, regression, clustering, or ranking Feature engineering Feature selection Feature extraction Meta-learning and transfer learning Detection and handling of skewed data and/or missing values Model selection - choosing which machine learning algorithm to use, often including multiple competing software implementations Ensembling - a form of consensus where using multiple models often gives better results than any single model Hyperparameter optimization of the learning algorithm and featurization Neural architecture search Pipeline selection under time, memory, and complexity constraints Selection of evaluation metrics and validation procedures Problem checking Leakage detection Misconfiguration detection Analysis of obtained results Creating user interfaces and visualizations == Challenges and Limitations == There are a number of key challenges being tackled around automated machine learning. A big issue surrounding the field is referred to as "development as a cottage industry". This phrase refers to the issue in machine learning where development relies on manual decisions and biases of experts. This is contrasted to the goal of machine learning which is to create systems that can learn and improve from their own usage and analysis of the data. Basically, it's the struggle between how much experts should get involved in the learning of the systems versus how much freedom they should be giving the machines. However, experts and developers must help create and guide these machines to prepare them for their own learning. To create this system, it requires labor intensive work with knowledge of machine learning algorithms and system design. Additionally, other challenges include meta-learning and computational resource allocation.
Read more →
Elowan

Elowan is a plant-robot cyborg. Using its own internal bioelectrical signals, The plant has a robotic extension that makes it move towards light sources. Electrodes are inserted into the leaves, stem, and ground to detect the faint bioelectrical signals the plant produces. Then they are amplified so the robot can read them. So when the plant "wants" to go to light, the cyborg automatically goes to the nearest light source. Future extensions of the robot could provide: Protection, growth frameworks, and nutrients. Other factors that could make the cyborg move are temperature, soil, and gravity conditions Elowan is one in a series of plant-electronic hybrid experiments.
Read more →
Artificial intelligence

Artificial intelligence (AI) is the capability of computational systems to perform tasks typically associated with human intelligence, such as learning, reasoning, problem-solving, perception, and decision-making. It is a field of research in engineering, mathematics and computer science that develops and studies methods and software that enable machines to perceive their environment and use learning and intelligence to take actions that maximize their chances of achieving defined goals. High-profile applications of AI include advanced web search engines, chatbots, virtual assistants, autonomous vehicles, and play and analysis in strategy games (e.g., chess and Go). Since the 2020s, generative AI has become widely available to generate images, audio, and videos from text prompts. The traditional goals of AI research include learning, reasoning, knowledge representation, planning, natural language processing, and perception, as well as support for robotics. To reach these goals, AI researchers have used techniques including state space search and mathematical optimization, formal logic, artificial neural networks, and methods based on statistics, operations research, and economics. AI also draws upon psychology, linguistics, philosophy, neuroscience, and other fields. Some companies, such as OpenAI, Google DeepMind and Meta, aim to create artificial general intelligence (AGI) – AI that can complete virtually any cognitive task at least as well as a human. Artificial intelligence was founded as an academic discipline in 1956, and the field went through multiple cycles of optimism throughout its history, followed by periods of disappointment and loss of funding, known as AI winters. Funding and interest increased substantially after 2012, when graphics processing units began being used to accelerate neural networks, and deep learning outperformed previous AI techniques. This growth accelerated further after 2017 with the transformer architecture. In the 2020s, an AI boom has coincided with advances in generative AI, which allowed for the creation and modification of media. In addition to AI safety and unintended consequences and harms from the use of AI, ethical concerns, AI's long-term effects, and potential existential risks have prompted discussions of AI regulation. == Goals == The general problem of simulating (or creating) intelligence has been broken into subproblems. These consist of particular traits or capabilities that researchers expect an intelligent system to display. The traits described below have received the most attention and cover the scope of AI research. === Reasoning and problem-solving === Early researchers developed algorithms that imitated step-by-step reasoning that humans use when they solve puzzles or make logical deductions. By the late 1980s and 1990s, methods were developed for dealing with uncertain or incomplete information, employing concepts from probability and economics. Many of these algorithms are insufficient for solving large reasoning problems because they experience a "combinatorial explosion": They become exponentially slower as the problems grow. Even humans rarely use the step-by-step deduction that early AI research could model. They solve most of their problems using fast, intuitive judgments. Accurate and efficient reasoning is an unsolved problem. === Knowledge representation === Knowledge representation and knowledge engineering allow AI programs to answer questions intelligently and make deductions about real-world facts. Formal knowledge representations are used in content-based indexing and retrieval, scene interpretation, clinical decision support, knowledge discovery (mining "interesting" and actionable inferences from large databases), and other areas. A knowledge base is a body of knowledge represented in a form that can be used by a program. An ontology is the set of objects, relations, concepts, and properties used by a particular domain of knowledge. Knowledge bases need to represent things such as objects, properties, categories, and relations between objects; situations, events, states, and time; causes and effects; knowledge about knowledge (what we know about what other people know); default reasoning (things that humans assume are true until they are told differently and will remain true even when other facts are changing); and many other aspects and domains of knowledge. Among the most difficult problems in knowledge representation are the breadth of commonsense knowledge (the set of atomic facts that the average person knows is enormous); and the sub-symbolic form of most commonsense knowledge (much of what people know is not represented as "facts" or "statements" that they could express verbally). There is also the difficulty of knowledge acquisition, the problem of obtaining knowledge for AI applications. === Planning and decision-making === An "agent" is any entity (artificial or not) that perceives and takes actions in the world. A rational agent has goals or preferences and takes actions to make them happen. In automated planning, the agent has a specific goal. In automated decision-making, the agent has preferences—there are some situations it would prefer to be in, and some situations it is trying to avoid. The decision-making agent assigns a number to each situation (called the "utility") that measures how much the agent prefers it. For each possible action, it can calculate the "expected utility": the utility of all possible outcomes of the action, weighted by the probability that the outcome will occur. It can then choose the action with the maximum expected utility. In classical planning, the agent knows exactly what the effect of any action will be. In most real-world problems, however, the agent may not be certain about the situation they are in (it is "unknown" or "unobservable") and it may not know for certain what will happen after each possible action (it is not "deterministic"). It must choose an action by making a probabilistic guess and then reassess the situation to see if the action worked. Alongside thorough testing and improvement based on previous decisions, having an explanation for why the agent took certain decisions is a way to build trust, especially when the decisions have to be relied upon. In some problems, the agent's preferences may be uncertain, especially if there are other agents or humans involved. These can be learned (e.g., with inverse reinforcement learning), or the agent can seek information to improve its preferences. Information value theory can be used to weigh the value of exploratory or experimental actions. The space of possible future actions and situations is typically intractably large, so the agents must take actions and evaluate situations while being uncertain of what the outcome will be. A Markov decision process has a transition model that describes the probability that a particular action will change the state in a particular way and a reward function that supplies the utility of each state and the cost of each action. A policy associates a decision with each possible state. The policy could be calculated (e.g., by iteration), be heuristic, or it can be learned. Game theory describes the rational behavior of multiple interacting agents and is used in AI programs that make decisions that involve other agents. === Learning === Machine learning is the study of programs that can improve their performance on a given task automatically. It has been a part of AI from the beginning. There are several kinds of machine learning. Unsupervised learning analyzes a stream of data and finds patterns and makes predictions without any other guidance. Supervised learning requires labeling the training data with the expected answers, and comes in two main varieties: classification (where the program must learn to predict what category the input belongs in) and regression (where the program must deduce a numeric function based on numeric input). In reinforcement learning, the agent is rewarded for good responses and punished for bad ones. The agent learns to choose responses that are classified as "good". Transfer learning is when the knowledge gained from one problem is applied to a new problem. Deep learning is a type of machine learning that runs inputs through biologically inspired artificial neural networks for all of these types of learning. Computational learning theory can assess learners by computational complexity, by sample complexity (how much data is required), or by other notions of optimization. === Natural language processing === Natural language processing (NLP) allows programs to read, write and communicate in human languages. Specific problems include speech recognition, speech synthesis, machine translation, information extraction, information retrieval and question answering. Early work, based on Noam Chomsky's generative grammar and semantic networks, had difficulty with word-sense disambiguation unless
Read more →
Artificial intelligence in education

Artificial intelligence in education (often abbreviated as AIEd) is a subfield of educational technology that studies how to use artificial intelligence to create learning environments. Considerations in the field include data-driven decision-making, AI ethics, data privacy and AI literacy. Concerns include the potential for cheating, over-reliance, equity of access, reduced critical thinking, and the perpetuation of misinformation and bias. == History == Efforts to integrate AI into educational contexts have often followed technological advancement in the history of artificial intelligence. In the 1960s, educators and researchers began developing computer-based instruction systems, such as PLATO, developed by the University of Illinois. In the 1970s and 1980s, intelligent tutoring systems (ITS) were being adapted for classroom instruction. The International Artificial Intelligence in Education Society was founded in 1993. Coinciding with the AI boom of the 2020s, the use of large language models in the global north has been promoted and funded by venture capital and big tech. Companies creating AI services have targeted students and educational institutions as customers. Similarly, pre-AI boom educational companies have expanded their use of AI technologies. These commercial incentives for AIEd use may be related to a potential AI bubble. In the U.S., bipartisan support of AI development in K-12 education has been expressed, but specific implementations and best practices remain contentious. == Theory == AIEd applies theory from education studies, machine learning, and related fields. A 2019 review of the previous decade of studies found that most research prioritized technological design over pedagogical integration. Ouyang and Jiao (2021) propose three paradigms for AI in education, which follow roughly from least to most learner-centered and from requiring least to most technical complexity from the AI systems: AI-directed, learner-as-recipient: AIEd systems present a pre-set curriculum based on statistical patterns that do not adjust to learner's feedback. AI-supported, learner-as-collaborator: Systems that incorporate responsiveness to learner's feedback through, for example, natural language processing, wherein AI can support knowledge construction. AI-empowered, learner-as-leader: This model seeks to position AI as a supplement to human intelligence wherein learners take agency and AI provides consistent and actionable feedback. Some scholars place AI in education within a socio-technical framework. This positions AI alongside other emerging educational technologies, such as computing, the internet, and social media. The framework of Tsao, Heinrichs and Camit (2025) draws on new materialism and posthumanism, specifically Donna Haraway's concept of sympoiesis (making-with). This perspective views learning as an entanglement of human and non-human actors (students, teachers, and AI algorithms), where knowledge is co-composed in contact zones between human context and algorithmic prediction. AI agents have been trained on biased datasets, and thus continue to perpetuate societal biases. Since LLMs were created to produce human-like text, algorithmic bias can be introduced and reproduced. AI's data processing and monitoring reinforce neoliberal approaches to education rather than addressing inequalities. == Applications == Uses of generative AI chatbots in education have included assessment and feedback, machine translations, proof-reading exam question generation and copy editing, or as virtual assistants. Emotional AI in education is the study and development of systems that can detect learners' emotions or provide emotional support in learning. == Usage == === Schools and educators === Following the release of ChatGPT in November 2022, some schools and large school districts blocked access to the site and issued warnings that the use of such tools would be seen as cheating. Governmental and non-governmental organizations such as UNESCO, Article 4 of the European Union's AI Act, and the U.S. Department of Education have published reports advocating for specific AIEd approaches. National higher-education bodies have also published guidance on generative AI, including Ireland's Higher Education Authority, which issued a policy framework for higher education teaching and learning in December 2025. In 2024, UNESCO released updated global guidance for generative AI in education, emphasizing ethical use, teacher training, and data protection to ensure responsible integration of AI tools in learning environments. According to Taso (2025), policy implementation in higher education is interpreted and enacted differently by various organizations. These decentralized policies can lead to inconsistent enforcement and confusion among students regarding what constitutes acceptable use, with the burden of ethical navigation falling on individual teachers and students. AI integration in classrooms has created new forms of invisible labour for educators, who must navigate ambiguous policies, redesign assessments to be AI-resilient, and adjudicate potential academic integrity violations. The use of AI detection tools has also been criticised for creating an adversarial relationship between students and institutions, where students may be falsely accused of misconduct based on probabilistic software. AIEd advocates say that efforts should be made towards increasing global accessibility and training educators to serve underprivileged areas. === Students === Reliance on generative AI has been linked with reduced academic self-esteem and performance, and heightened learned helplessness. Algorithm errors and hallucinations are common flaws in AI agents, making them less trustworthy and reliable. According to a 2025 survey from Inside Higher Ed, 85% of higher education students use generative AI technology in some way, with 25% using AI to complete assignments for them. The most common reason cited for using AI to cheat was pressure to get high grades. 97% of students wanted some form of action from schools on the threat to academic integrity caused by AI, with the most popular options being clearer policies and more education about ethical uses of AI. In September 2025, The Atlantic published an op-ed from a high school senior arguing that the normalization of AI cheating was eroding critical thinking, academic integrity, creativity, and the shared student experience.
Read more →