AI For Kids Google

AI For Kids Google — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Interlacing (bitmaps)

  In computing, interlacing (also known as interleaving) is a method of encoding a bitmap image such that a person who has partially received it sees a degraded copy of the entire image. When communicating over a slow communications link, this is often preferable to seeing a perfectly clear copy of one part of the image, as it helps the viewer decide more quickly whether to abort or continue the transmission. Interlacing is supported by the following formats, where it is optional: GIF interlacing stores the lines in the order 0 , 8 , 16 , … , ( 8 n ) , 4 , 12 , … , ( 8 n + 4 ) , 2 , 6 , 10 , 14 , … , ( 4 n + 2 ) , 1 , 3 , 5 , 7 , 9 , … , ( 2 n + 1 ) . {\displaystyle 0,8,16,\dots ,(8n),\ 4,12,\dots ,(8n+4),\ 2,6,10,14,\dots ,(4n+2),\ 1,3,5,7,9,\dots ,(2n+1).} PNG uses the Adam7 algorithm, which interlaces in both the vertical and horizontal direction. TGA uses two optional interlacing algorithms: Two-way: 0 , 2 , 4 , … , ( 2 n ) , 1 , 3 , … , ( 2 n + 1 ) , {\displaystyle 0,2,4,\dots ,(2n),\ 1,3,\dots ,(2n+1),} And four-way: 0 , 4 , 8 , … , ( 4 n ) , 1 , 5 , … , ( 4 n + 1 ) , 2 , 6 , … , ( 4 n + 2 ) , 3 , 7 , … , ( 4 n + 3 ) . {\displaystyle 0,4,8,\dots ,(4n),\ 1,5,\dots ,(4n+1),\ 2,6,\dots ,\ (4n+2),3,7,\dots ,(4n+3).} JPEG, JPEG 2000, and JPEG XR (actually using a frequency decomposition hierarchy rather than interlacing of pixel values) PGF (also using a frequency decomposition) Interlacing is a form of incremental decoding, because the image can be loaded incrementally. Another form of incremental decoding is progressive scan. In progressive scan the loaded image is decoded line for line, so instead of becoming incrementally clearer it becomes incrementally larger. The main difference between the interlace concept in bitmaps and in video is that even progressive bitmaps can be loaded over multiple frames. For example: Interlaced GIF is a GIF image that seems to arrive on your display like an image coming through a slowly opening Venetian blind. A fuzzy outline of an image is gradually replaced by seven successive waves of bit streams that fill in the missing lines until the image arrives at its full resolution. Interlaced graphics were once widely used in web design and before that in the distribution of graphics files over bulletin board systems and other low-speed communications methods. The practice is much less common today, as common broadband internet connections allow most images to be downloaded to the user's screen nearly instantaneously, and interlacing is usually an inefficient method of encoding images. Interlacing has been criticized because it may not be clear to viewers when the image has finished rendering, unlike non-interlaced rendering, where progress is apparent (remaining data appears as blank). Also, the benefits of interlacing to those on low-speed connections may be outweighed by having to download a larger file, as interlaced images typically do not compress as well.

  Read more →
• 

  Linde–Buzo–Gray algorithm

  The Linde–Buzo–Gray algorithm (named after its creators Yoseph Linde, Andrés Buzo and Robert M. Gray, who designed it in 1980) is an iterative vector quantization algorithm to improve a small set of vectors (codebook) to represent a larger set of vectors (training set), such that it will be locally optimal. It combines Lloyd's Algorithm with a splitting technique in which larger codebooks are built from smaller codebooks by splitting each code vector in two. The core idea of the algorithm is that by splitting the codebook such that all code vectors from the previous codebook are present, the new codebook must be as good as the previous one or better. == Description == The Linde–Buzo–Gray algorithm may be implemented as follows: algorithm linde-buzo-gray is input: set of training vectors training, codebook to improve old-codebook output: codebook that is twice the size and better or as good as old-codebook new-codebook ← {} for each old-codevector in old-codebook do insert old-codevector into new-codebook insert old-codevector + 𝜖 into new-codebook where 𝜖 is a small vector return lloyd(new-codebook, training) algorithm lloyd is input: codebook to improve, set of training vectors training output: improved codebook do previous-codebook ← codebook clusters ← divide training into |codebook| clusters, where each cluster contains all vectors in training who are best represented by the corresponding vector in codebook for each cluster cluster in clusters do the corresponding code vector in codebook ← the centroid of all training vectors in cluster while difference in error representing training between codebook and previous-codebook > 𝜖 return codebook

  Read more →
• 

  Model

  A model is an informative representation of an object, person, or system. The term originally denoted the plans of a building in 16th-century English, and derived via French and Italian ultimately from Latin modulus, 'a measure'. Models can be divided into physical models (e.g. a ship model) and abstract models (e.g. a set of mathematical equations describing the workings of the atmosphere for the purpose of weather forecasting). Abstract or conceptual models are central to philosophy of science. In scholarly research and applied science, a model should not be confused with a theory: while a model seeks only to represent reality with the purpose of better understanding or predicting the world, a theory is more ambitious in that it claims to be an explanation of reality. == Types of model == === Model in specific contexts === As a noun, model has specific meanings in certain fields, derived from its original meaning of "structural design or layout": Model (art), a person posing for an artist, e.g. a 15th-century criminal representing the biblical Judas in Leonardo da Vinci's painting The Last Supper Model (person), a person who serves as a template for others to copy, as in a role model, often in the context of advertising commercial products; e.g. the first fashion model, Marie Vernet Worth in 1853, wife of designer Charles Frederick Worth. Model (product), a particular design of a product as displayed in a catalogue or show room (e.g. Ford Model T, an early car model) Model (organism) a non-human species that is studied to understand biological phenomena in other organisms, e.g. a guinea pig starved of vitamin C to study scurvy, an experiment that would be immoral to conduct on a person Model (mimicry), a species that is mimicked by another species Model (logic), a structure (a set of items, such as natural numbers 1, 2, 3,..., along with mathematical operations such as addition and multiplication, and relations, such as < {\displaystyle <} ) that satisfies a given system of axioms (basic truisms), i.e. that satisfies the statements of a given theory Model (CGI), a mathematical representation of any surface of an object in three dimensions via specialized software Model (MVC), the information-representing internal component of a software, as distinct from its user interface === Physical model === A physical model (most commonly referred to simply as a model but in this context distinguished from a conceptual model) is a smaller or larger physical representation of an object, person or system. The object being modelled may be small (e.g., an atom) or large (e.g., the Solar System) or life-size (e.g., a fashion model displaying clothes for similarly-built potential customers). The geometry of the model and the object it represents are often similar in the sense that one is a rescaling of the other. However, in many cases the similarity is only approximate or even intentionally distorted. Sometimes the distortion is systematic, e.g., a fixed scale horizontally and a larger fixed scale vertically when modelling topography to enhance a region's mountains. An architectural model permits visualization of internal relationships within the structure or external relationships of the structure to the environment. Another use is as a toy. Instrumented physical models are an effective way of investigating fluid flows for engineering design. Physical models are often coupled with computational fluid dynamics models to optimize the design of equipment and processes. This includes external flow such as around buildings, vehicles, people, or hydraulic structures. Wind tunnel and water tunnel testing is often used for these design efforts. Instrumented physical models can also examine internal flows, for the design of ductwork systems, pollution control equipment, food processing machines, and mixing vessels. Transparent flow models are used in this case to observe the detailed flow phenomenon. These models are scaled in terms of both geometry and important forces, for example, using Froude number or Reynolds number scaling (see Similitude). In the pre-computer era, the UK economy was modelled with the hydraulic model MONIAC, to predict for example the effect of tax rises on employment. === Conceptual model === A conceptual model is a theoretical representation of a system, e.g. a set of mathematical equations attempting to describe the workings of the atmosphere for the purpose of weather forecasting. It consists of concepts used to help understand or simulate a subject the model represents. Abstract or conceptual models are central to philosophy of science, as almost every scientific theory effectively embeds some kind of model of the physical or human sphere. In some sense, a physical model "is always the reification of some conceptual model; the conceptual model is conceived ahead as the blueprint of the physical one", which is then constructed as conceived. Thus, the term refers to models that are formed after a conceptualization or generalization process. === Examples === Conceptual model (computer science), an agreed representation of entities and their relationships, to assist in developing software Economic model, a theoretical construct representing economic processes Language model, a probabilistic model of a natural language, used for speech recognition, language generation, and information retrieval Large language models are artificial neural networks used for generative artificial intelligence (AI), e.g. ChatGPT Mathematical model, a description of a system using mathematical concepts and language Statistical model, a mathematical model that usually specifies the relationship between one or more random variables and other non-random variables Model (CGI), a mathematical representation of any surface of an object in three dimensions via specialized software Medical model, a proposed "set of procedures in which all doctors are trained" Mental model, in psychology, an internal representation of external reality Model (logic), a set along with a collection of finitary operations, and relations that are defined on it, satisfying a given collection of axioms Model (MVC), information-representing component of a software, distinct from the user interface (the "view"), both linked by the "controller" component, in the context of the model–view–controller software design Model act, a law drafted centrally to be disseminated and proposed for enactment in multiple independent legislatures Standard model (disambiguation) == Properties of models, according to general model theory == According to Herbert Stachowiak, a model is characterized by at least three properties: 1. Mapping A model always is a model of something—it is an image or representation of some natural or artificial, existing or imagined original, where this original itself could be a model. 2. Reduction In general, a model will not include all attributes that describe the original but only those that appear relevant to the model's creator or user. 3. Pragmatism A model does not relate unambiguously to its original. It is intended to work as a replacement for the original a) for certain subjects (for whom?) b) within a certain time range (when?) c) restricted to certain conceptual or physical actions (what for?). For example, a street map is a model of the actual streets in a city (mapping), showing the course of the streets while leaving out, say, traffic signs and road markings (reduction), made for pedestrians and vehicle drivers for the purpose of finding one's way in the city (pragmatism). Additional properties have been proposed, like extension and distortion as well as validity. The American philosopher Michael Weisberg differentiates between concrete and mathematical models and proposes computer simulations (computational models) as their own class of models. == Uses of models == According to Bruce Edmonds, there are at least 5 general uses for models: Prediction: reliably anticipating unknown data, including data within the domain of the training data (interpolation), and outside the domain (extrapolation) Explanation: establishing plausible chains of causality by proposing mechanisms that can explain patterns seen in data Theoretical exposition: discovering or proposing new hypotheses, or refuting existing hypotheses about the behaviour of the system being modelled Description: representing important aspects of the system being modelled Illustration: communicating an idea or explanation

  Read more →
• 

  Graphics Turing test

  In computer graphics the graphics Turing test is a variant of the Turing test, the twist being that a human judge viewing and interacting with an artificially generated world should be unable to reliably distinguish it from reality. The original formulation of the test is: "The subject views and interacts with a real or computer generated scene. The test is passed if the subject can not determine reality from simulated reality better than a random guess. (a) The subject operates a remotely controlled (or simulated) robotic arm and views a computer screen. (b) The subject enters a door to a controlled vehicle or motion simulator with computer screens for windows. An eye patch can be worn on one eye, as stereo vision is difficult to simulate." The "graphics Turing scale" of computer power is then defined as the computing power necessary to achieve success in the test. It was estimated in, as 1036.8 TFlops peak and 518.4 TFlops sustained. Actual rendering tests with a Blue Gene supercomputer showed that current supercomputers are not up to the task scale yet. A restricted form of the graphic Turing test has been investigated, where test subjects look into a box, and try to tell whether the contents are real or virtual objects. For the very simple case of scenes with a cardboard pyramid or a styrofoam sphere, subjects were not able to reliably tell reality and graphics apart.

  Read more →
• 

  The 2028 Global Intelligence Crisis

  The 2028 Global Intelligence Crisis is a report authored by James van Geelen and Alap Shah and published by Citrini Research in February 2026, on the impact of artificial intelligence on humanity's future. Written in the form of a scenario analysis, it was viewed millions of times online and reportedly caused a fall in the stock market prices of major tech and financial firms. It also received criticism among others, for its allegedly flawed economic logic. The 'thought exercise', as the authors called it, painted a gloomy picture for the near future, where outputs keep growing while consumer's ability to spend collapses. "...driven by ai agents that don’t sleep, take sick days or require health insurance”, "outputs that are shown in national accounts increases, "but never circulates through the real economy"(which the report calls 'Ghost GDP'), the authors argued. In other words, the authors predict a scenario where the owners of the AI firms will accumulate a vast fortune but there will be scant demand from consumers as AI would cause massive unemployment. The authors caution the reader that what they make is a scenario and not a prediction. In the scenario they visualise, any service whose value proposition is “I will navigate complexity that you find tedious” is getting disrupted. The reports argues that the unique ability of human beings to analyse, decide, create, persuade, and coordinate was “the thing that could not be replicated at scale,” and call the historical scarcity of this precious entity 'friction'. When this friction becomes zero, a gamut of changes occur which then triggers a cascading of changes across the economy. ”Travel booking platforms are an early casualty; Financial advice. tax prep., and routine legal work follow suit. National unemployment rate go as high 10.2% and the S&P 500 goes for a massive 38% peak-to-trough crash. In contrast to the previous technological revolutions the high-earning professionals suffers more and get forced to take up roles in the gig economy. Labour supply becomes abundant and this cuts wages all across the economy. The dent in income for the employees then affects other sectors of the economy such as the residential mortgage market. The losses for the software companies triggers loan defaults and heralds peril for the private credit sector.

  Read more →
• 

  Plinian Core

  Plinian Core is a set of vocabulary terms that can be used to describe different aspects of biological species information. Under "biological species Information" all kinds of properties or traits related to taxa—biological and non-biological—are included. Thus, for instance, terms pertaining descriptions, legal aspects, conservation, management, demographics, nomenclature, or related resources are incorporated. == Description == The Plinian Core is aimed to facilitate the exchange of information about the species and upper taxa. What is in scope? Species level catalogs of any kind of biological objects or data. Terminology associated with biological collection data. Striving for compatibility with other biodiversity-related standards. Facilitating the addition of components and attributes of biological data. What is not in scope? Data interchange protocols. Non-biodiversity-related data. Occurrence level data. This standard is named after Pliny the Elder, a very influential figure in the study of the biological species. Plinian Core design requirements includes: ease of use, to be self-contained, able to support data integration from multiple databases, and ability to handle different levels of granularity. Core terms can be grouped in its current version as follows: Metadata Base Elements Record Metadata Nomenclature and Classification Taxonomic description Natural history Invasive species Habitat and Distribution Demography and Threats Uses, Management and Conservation associatedParty, MeasurementOrFact, References, AncillaryData == Background == Plinian Core started as a collaborative project between Instituto Nacional de Biodiversidad and GBIF Spain in 2005. A series of iterations in which elements were defined and implanted in different projects resulted in a "Plinian Core Flat" [deprecated]. As a result, a new development was impulse to overcome them in 2012. New formal requirements, additional input and a will to better support the standard and its documentation, as well as to align it with the processes of TDWG, the world reference body for biodiversity information standards. A new version, Plinian Core v3.x.x was defined. This provides more flexibility to fully represent the information of a species in a variety of scenarios. New elements to deal with aspects such as IPR, related resources, referenced, etc. were introduced, and elements already included were better-defined and documented. Partner for the development of Plinian Core in this new phase incorporated the University of Granada (UG, Spain), the Alexander von Humboldt Institute (IAvH, Colombia), the National Commission for the Knowledge and Use of Biodiversity (Conabio, Mexico) and the University of São Paulo (USP, Brazil). A "Plinian Core Task Group" within TDWG "Interest Group on species Information" was constituted and currently working on its development. == Levels of the standard == Plinian Core is presented in to levels: the abstract model and the application profiles. The abstract model (AM), comprising the abstract model schema(xsd) and the terms' URIs, is the normative part. It is all comprehensive, and allows for different levels of granularity in describing species properties. The AM should be taken as a "menu" from which to choose terms and level of detail needed in any specific project. The subsets of the abstract model intended to be implemented in specific projects are the "application profiles" (APs). Besides containing part of the elements of the AM, APs can impose additional specifications on the included elements, such as controlled vocabularies. Some examples of APs in use follow: Application profile CONABIO Application profile INBIO Application profile GBIF.ES Application profile Banco de Datos de la Naturaleza.Spain Application profile SIB-COLOMBIA == Relation to other standards == Plinian incorporates a number of elements already defined by other standards. The following table summarizes these standards and the elements used in Plinian Core:

  Read more →
• 

  User profile

  A user profile is a collection of settings and information associated with a user. It contains critical information that is used to identify an individual, such as their name, age, portrait photograph and individual characteristics such as knowledge or expertise. User profiles are most commonly present on social media websites such as Facebook, Instagram, and LinkedIn; and serve as voluntary digital identity of an individual, highlighting their key features and traits. In personal computing and operating systems, user profiles serve to categorise files, settings, and documents by individual user environments, known as 'accounts', allowing the operating system to be more friendly and catered to the user. Physical user profiles serve as identity documents such as passports, driving licenses and legal documents that are used to identify an individual under the legal system. A user profile can also be considered as the computer representation of a user model. A user model is a (data) structure that is used to capture certain characteristics about an individual user, and the process of obtaining the user profile is called user modeling or profiling. == Origin == The origin of user profiles can be traced to the origin of the passport, an identity document (ID) made mandatory in 1920, after World War I following negotiations at the League of Nations. The passport served as an official government record of an individual. Consequently, Immigration Act of 1924 was established to identify an individual's country of origin. In the 21st century, passports have now become a highly sought-after commodity as it is widely accepted as a source of verifying an individual's identity under the legal system. With the advent of digital revolution and social media websites, user profiles have transitioned to an organised group of data describing the interaction between a user and a system. Social media sites like Instagram allow individuals to create profiles that are representative of their desired personality and image. Filling all fields of profile information may not be necessary to create a meaningful self-presentation, which grants individual more control over of the identity they wish to present by displaying the most meaningful attributes. A personal user profile is a key aspect of an individual's social networking experience, around which his/her public identity is built. == Types of user profiles == A user profile can be of any format if it contains information, settings and/or characteristics specific to an individual. Most popular user profiles include those on photo and video sharing websites such as Facebook and Instagram, accounts on operating systems, such as those on Windows and MacOS and physical documents such as passports and driving licenses. === Social media === Effectively structured user profiles on social media channels such as Instagram and Facebook offer a way for people to form impressions about someone that is predictive or similarly meeting them offline. The condensed format of social media profiles allows for quick filtering of millions of profiles by matching individuals by similar characteristics and interests; information provided upon sign up. A research conducted highlights that only a "thin slice" of information is required to form an impression about an individual online (Stecher and Counts 2008). Online user profiles eliminate the complexity of interaction that is present in 'face-to-face' meetings such as behavioural, facial, and environmental information, resulting in increased predictiveness of user personality. Dating apps and websites solely rely on an individual's user profile and the information provided to form interactions and communication with others on the platform. Despite having control over presented information, lying is minimal in online dating contexts (Hancock, Toma and Ellison, 2007). Apps such as Bumble allow users to 'match' with other individuals based on their characteristics and selected filters that allow users to narrow the spectrum of search to their preference. Information for a user's profile is voluntarily specified by the user and includes information such as height, interests, photographs, gender or education. The requirement of information varies respective to each platform, and there surrounds little consensus to an appropriate amount of information for a condensed user profile. Universally, all social networking platforms display an individual's profile picture and an "about me" page that allows for self-expression. === Influencers === Influencer user profiles are third party endorsers who shape audience attitudes and decisions through social media content such as photos, blogs and tweets. Social Media Influencers (SMI) often hold a significant following on a social media platform which enables them to be recognised as opinion leaders to shape an information influence to their audience. 'Influencer marketing' industry gained prominence in 2018, when the photo sharing app Instagram crossed 1 billion users, subsequently with approximately 60,000 google search queries for 'influencer marketing' the same year. Influencer user profiles hold a unique selling point, or public personality that is unique and charismatic to the needs and wants of their target audience. SMI profiles advertise product information, latest promotions and regularly engage with their followers to maintain their online persona. Messages endorsed by social media influencers are often perceived as reliable and compelling, as a study conducted found 82% of followers were more inclined to follow the suggestions of their favorite influencer. This allows advertisers to leverage online user profiles and their audience rapport to target younger and niche audiences. According to a market survey, influencer marketing through social media profiles yields a return 11 times higher than traditional marketing, as they are more capable of communicating to a niche segment. Most popular influencers include sport starts such as Cristiano Ronaldo and Hollywood personalities such as Dwayne Johnson and Kylie Jenner each with over 200 million followers respectively. === Ecommerce === Online shopping or Ecommerce websites such as Amazon use information from a customer's user profile and interests to generate a list of recommended items to shop. Recommendation algorithms analyse user demographic data, history, and favourite artists to compile suggestions. The store rapidly adapts to changing user needs and preferences, with generation of real time results required within half of a second. New profiles naturally have limited information for algorithms to analyse, and customer data of each interaction provides valuable information which is stored as a database linked with each individual profile. User profiles on ecommerce websites also serve to improve sales of sellers as individuals are recommend products that other "customers who bought this item also bought" to widen the selection of the buyer. A study conducted found that user profiles and recommendation algorithms have significant impact on related product sales and overall spending of an individual. A process known as "collaborative filtering" tries to analyse common products of interest for an individual on the basis of views expressed by other similar behaving profiles. Features such as product ratings, seller ratings and comments allow individual user profiles to contribute to recommendation algorithms, eliminate adverse selection and contribute to shaping an online marketplace adhering to Amazons zero tolerance policy for misleading products. == Digital user profiles == Modern software and applications account for user profiles as a foundation on which a usable application is built. The structure and layout of an application such as its menus, features and controls are often derived from user's selected settings and preferences. The origin of digital user profiles in computer systems was first initiated by Windows NT that held user settings and information in a separate environment variable named %USERPROFILE% and held the framework to a user's profile root. Consequently, operating systems such as MacOS further accelerated prominence of user profiles in Mac OS X 10.0. Iterations since have been made with each operating system release with the aim to maximise user friendliness with the system. Features such as keyboard layouts, time zones, measurement units, synchronisation of different services and privacy preferences are made available during the setup of a user account on the computer === Types of accounts === ==== Administrator ==== Administrator user profiles have complete access to the system and its permissions. It is often the first user profile on a system by design, and is what allows other accounts to be created. However, since the administrator account has no restrictions, they are highly vulnerable to malware and viruses, with potential to impact all other accounts.

  Read more →
• 

  Stochastic Neural Analog Reinforcement Calculator

  The Stochastic Neural Analog Reinforcement Calculator (SNARC) is a neural network machine designed by Marvin Minsky. Prompted by a letter from Minsky, George Armitage Miller gathered the funding (a few thousand dollars) for the project from the Office of Naval Research of the U.S. Department of Defense in the summer of 1951 with the work to be carried out by Minsky, who was then a graduate student in mathematics at Princeton University. At the time, a physics graduate student at Princeton, Dean S. Edmonds, volunteered that he was good with electronics and therefore Minsky brought him onto the project. During undergraduate years, Minsky was inspired by the 1943 Warren McCulloch and Walter Pitts paper on artificial neurons, and decided to build such a machine. The learning was Skinnerian reinforcement learning, and Minsky talked with Skinner extensively during the development of the machine. They tested the machine on a copy of Shannon's maze, and found that it could learn to solve the maze. Unlike Shannon's maze, this machine did not control a physical robot, but simulated rats running in a maze. The simulation is displayed as an "arrangement of lights", and the circuit was reinforced each time the simulated rat reached the goal. The machine surprised its creators. "The rats actually interacted with one another. If one of them found a good path, the others would tend to follow it." The machine itself is a randomly connected network of approximately 40 Hebb synapses. These synapses each have a memory that holds the probability that signal comes in one input and another signal will come out of the output. There is a probability knob that goes from 0 to 1 that shows this probability of the signals propagating. If the probability signal gets through, a capacitor remembers this function and engages an electromagnetic clutch. At this point, the operator will press a button to give a reward to the machine. This activates a motor on a surplus Minneapolis-Honeywell C-1 gyroscopic autopilot from a B-24 bomber. The motor turns a chain that goes to all 40 synapse machines, checking if the clutch is engaged or not. As the capacitor can only "remember" for a certain amount of time, the chain only catches the most recent updates of the probabilities. Each neuron contained 6 vacuum tubes and a motor. The entire machine is "the size of a grand piano" and contained 300 vacuum tubes. The tubes failed regularly, but the machine would still work despite failures. This machine is considered one of the first pioneering attempts at the field of artificial intelligence. Minsky went on to be a founding member of MIT's Project MAC, which split to become the MIT Laboratory for Computer Science and the MIT Artificial Intelligence Lab, and is now the MIT Computer Science and Artificial Intelligence Laboratory. In 1985 Minsky became a founding member of the MIT Media Laboratory. According to Minsky, he loaned the machine to students in Dartmouth, and subsequently lost, except for a single neuron. A photo of Minsky's last neuron can be seen here. The photo shows 6 vacuum tubes, one of which is a Sylvania JAN-CHS-6H6GT/G/VT-90A.

  Read more →
• 

  Security of the Java software platform

  The Java software platform provides a number of features designed for improving the security of Java applications. This includes enforcing runtime constraints through the use of the Java Virtual Machine (JVM), a security manager that sandboxes untrusted code from the rest of the operating system, and a suite of security APIs that Java developers can utilise. Despite this, criticism has been directed at the programming language, and Oracle, due to an increase in malicious programs that revealed security vulnerabilities in the JVM, which were subsequently not properly addressed by Oracle in a timely manner. == Security features == === The JVM === The binary form of programs running on the Java platform is not native machine code but an intermediate bytecode. The JVM performs verification on this bytecode before running it to prevent the program from performing unsafe operations such as branching to incorrect locations, which may contain data rather than instructions. It also allows the JVM to enforce runtime constraints such as array bounds checking. This means that Java programs are significantly less likely to suffer from memory safety flaws such as buffer overflow than programs written in languages such as C which do not provide such memory safety guarantees. The platform does not allow programs to perform certain potentially unsafe operations such as pointer arithmetic or unchecked type casts. It manages memory allocation and initialization and provides automatic garbage collection which in many cases (but not all) relieves the developer from manual memory management. This contributes to type safety and memory safety. === Security manager === The platform provides a security manager which allows users to run untrusted bytecode in a "sandboxed" environment designed to protect them from malicious or poorly written software by preventing the untrusted code from accessing certain platform features and APIs. For example, untrusted code might be prevented from reading or writing files on the local filesystem, running arbitrary commands with the current user's privileges, accessing communication networks, accessing the internal private state of objects using reflection, or causing the JVM to exit. The security manager also allows Java programs to be cryptographically signed; users can choose to allow code with a valid digital signature from a trusted entity to run with full privileges in circumstances where it would otherwise be untrusted. Users can also set fine-grained access control policies for programs from different sources. For example, a user may decide that only system classes should be fully trusted, that code from certain trusted entities may be allowed to read certain specific files, and that all other code should be fully sandboxed. === Security APIs === The Java Class Library provides a number of APIs related to security, such as standard cryptographic algorithms, authentication, and secure communication protocols. === The sun.misc.Unsafe class === sun.misc.Unsafe is an internal utility class in the Java programming language which is a collection of low-level unsafe operations. While it is not a part of the official Java Class Library, it is called internally by the Java libraries. It resides in an unofficial Java module named jdk.unsupported. Beginning in Java 11, it has been partially migrated to jdk.internal.misc.Unsafe (which resides in module java.base). Its primary feature is to allow direct memory management (similar to C memory management) and memory address manipulation, manipulating objects and fields, thread manipulation, and concurrency primitives. Its declaration is: public final class Unsafe;, and it is a singleton class with a private constructor. It contains the following methods, many of which are declared native (invoking Java Native Interface): static Unsafe getUnsafe(): retrieves the Unsafe instance. It uses sun.reflect.Reflection to do so. int getInt(Object o, long offset): fetches a value (a field or array element) in the object at the given offset. (There are corresponding getBoolean(), getByte(), getShort(), getChar(), getLong(), getFloat(), and getDouble() methods as well.) void putInt(Object o, long offset, int x): stores a value into an object at the given offset. (There are corresponding putBoolean(), putByte(), putShort(), putChar(), putLong(), putFloat(), and putDouble() methods as well.) Object getObject(Object o, long offset): fetches a reference value from an object at the given offset. void putObject(Object o, long offset, Object x): stores a reference value into an object at the given offset. int getInt(long address): fetches a value at the given address. (There are corresponding getBoolean(), getByte(), getShort(), getChar(), getLong(), getFloat(), and getDouble() methods as well.) void putInt(long address, int x): stores a value into the given address. (There are corresponding putBoolean(), putByte(), putShort(), putChar(), putLong(), putFloat(), and putDouble() methods as well.) long getAddress(long address): fetches a native pointer from a given address. void putAddress(long address, long x): stores a native pointer into a given address. long allocateMemory(long bytes): allocates a block of native memory of the given size (similar to malloc()). long reallocateMemory(long address, long bytes): resizes a block of native memory to the given size (similar to realloc()). void setMemory(Object o, long offset, long bytes, byte value), void setMemory(long address, long bytes, byte value): sets all bytes in a block of memory to a fixed value (similar to memset()). void copyMemory(Object srcBase, long srcOffset, Object destBase, long destOffset, long bytes), void copyMemory(long srcAddress, long destAddress, long bytes): sets all bytes in a given block of memory to a copy of another block (similar to memcpy()). void freeMemory(long address): deallocates a block of native memory obtained from allocateMemory() or reallocateMemory(), similar to free()). long staticFieldOffset(Field f): obtains the location of a given field in the storage allocation of its class. long objectFieldOffset(Field f): obtains the location of a given static field in conjunction with staticFieldBase(). Object staticFieldBase(Field f): obtains the location of a given static field in conjunction with staticFieldOffset(). void ensureClassInitialized(Class c): ensures the given class has been initialized. int arrayBaseOffset(Class arrayClass): obtains the offset of the first element in the storage allocation of a given array class. int arrayIndexScale(Class arrayClass): obtains the scale factor for addressing elements in the storage allocation of a given array class. static int addressSize(): obtains the size (in bytes) of a native pointer. int pageSize(): obtains the size (in bytes) of a native memory page. Class defineClass(String name, byte[] b, int off, int len, ClassLoader loader, ProtectionDomain protectionDomain): signals to the JVM to define a class without security checks. Class defineAnonymousClass(Class hostClass, byte[] data, Object[] cpPatches): signals to the JVM to define a class but do not make it known to the class loader or system directory. Object allocateInstance(Class cls) throws InstantiationException: allocates an instance of a class without running its constructor. void monitorEnter(Object o): locks an object. void monitorExit(Object o): unlocks an object. boolean tryMonitorEnter(Object o): tries to lock an object, returning whether the lock succeeded. void throwException(Throwable ee): throws an exception without telling the verifier. final boolean compareAndSwapInt(Object o, long offset, int expected, int x): updates a variable to x if it is holding expected, returning whether the operation succeeded. (There are corresponding compareAndSwapLong() and compareAndSwapObject() methods as well.) int getIntVolatile(Object o, long offset): volatile version of getInt(). (There are corresponding getBooleanVolatile(), getByteVolatile(), getShortVolatile(), getCharVolatile(), getLongVolatile(), getFloatVolatile(), getDoubleVolatile(), and getObjectVolatile() methods as well.) void putIntVolatile(Object o, long offset, int x): volatile version of putInt(). (There are corresponding putBooleanVolatile(), putByteVolatile(), putShortVolatile(), putCharVolatile(), putLongVolatile(), putFloatVolatile(), putDoubleVolatile(), and putObjectVolatile() methods as well.) void putOrderedInt(Object o, long offset, int x): version of putIntVolatile() not guaranteeing immediate visibility of storage to other threads. (There are corresponding putOrderedLong() and putOrderedObject() methods as well.) void unpark(Object thread): unblocks a thread. void park(boolean isAbsolute, long time): blocks the current thread. int getLoadAverage(double[] loadavg, int nelems): gets the load average in the system run queue assigned to available processors averaged over various periods of time. void invokeCleaner(ByteBuffe

  Read more →
• 

  AgMES

  The AgMES (Agricultural Metadata Element set) initiative was developed by the Food and Agriculture Organization (FAO) of the United Nations and aims to encompass issues of semantic standards in the domain of agriculture with respect to description, resource discovery, interoperability, and data exchange for different types of information resources. There are numerous other metadata schemas for different types of information resources. The following list contains a list of a few examples: Document-like Information Objects (DLIOs): Dublin Core, Agricultural Metadata Element Set (AgMES) Events: VCalendar Geographic and Regional Information: Geographic information—Metadata ISO/IEC 11179 Standards Persons: Friend-of-a-friend (FOAF), vCard Plant Production and Protection: Darwin Core (1.0 and 2.0) (DwC) AgMES as a namespace is designed to include agriculture specific extensions for terms and refinements from established standard metadata namespaces like Dublin Core, AGLS etc. Thus, to be used for Document-like Information Objects, for example like publications, articles, books, web sites, papers, etc., it will have to be used in conjunction with the standard namespaces mentioned before. The AgMES initiative strives to achieve improved interoperability between information resources in agricultural domain by enabling means for exchange of information. Describing a DLIO with AgMES means exposing its major characteristics and contents in a standard way that can be reused easily in any information system. The more institutions and organizations in the agricultural domain that use AgMES to describe their DLIOs, the easier it will be to interchange data in between information systems like digital libraries and other repositories of agricultural information. == Use of AgMES == Metadata on agricultural Document-like Information Objects (DLIOs) can be created and stored in various formats: embedded in a web site (in the manner as with the HTML meta tag) in a separate metadata database in an XML file in an RDF file AgMES defines elements that can be used to describe a DLIO that can be used together with other metadata standards such as the Dublin Core, the Australian Government Locator Service. A complete list of all elements, refinements and schemes endorsed by AgMES is available from the AgMES website. === Creating application profiles === Application profiles are defined as schemas which consist of data elements drawn from one or more namespaces, combined by implementers, and optimized for a particular local application. Application profiles share the following four characteristics: They draw upon existing pool of metadata definition standards to extract suitable application- or requirement oriented elements. An application profile cannot create new elements. Application profiles specify the application specific details such as the schemes or controlled vocabularies. An application profile also contains information such as the format for the element value, cardinality or data type. Lastly, an application profile can refine standardized definitions as long as it is "semantically narrower or more specific". This capability of application profiles caters to situations where a domain specific terminology is needed to replace a more general one. === Sample application profiles using AgMES === The AGRIS Application Profile is a standard created specifically to enhance the description, exchange and subsequent retrieval of agricultural Document-like Information Objects (DLIOs). It is a format that allows sharing of information across dispersed bibliographic systems and is based on well-known and accepted metadata standards. The Event Application Profile is a standard created to allow members of the Agricultural community to 'know' about an upcoming event and guide them to the event Web site where they can find further information. The information communicated is thus minimum yet interoperable across domains and organizations. == AgMES and the semantic web == One of the advantages of the AgMES metadata schema is the ability to link between the metadata element and controlled vocabularies. The use of controlled vocabulary provides a "known" set of options to the indexer (and the search programmer) as to how the field can be filled out. Often the values may come from a specific thesaurus (e.g. AGROVOC) or classification schemes (e.g. the AGRIS/CARIS classification scheme) etc. Thanks to the possibility to use controlled vocabularies for metadata elements, the user is provided with the most precise information. In this context, work is also being carried out on exploiting the power of controlled vocabularies expressed as using URIs and machine-understandable semantics. In this context, FAO is promoting the Agricultural Ontology Service (AOS) initiative with the objective of expressing more semantics within the traditional thesaurus AGROVOC and build a Concept Server as a repository from which it will be always possible to extract traditional KOS.

  Read more →
• 

  Simulation decomposition

  SimDec, or Simulation decomposition, is a hybrid uncertainty and sensitivity analysis method, for visually examining the relationships between the output and input variables of a computational model. SimDec maps multivariable scenarios onto the distribution of the model output. This visual analytics approach exposes the underlying nature of the model behavior, including its nonlinear and multivariate interaction effects. SimDec can be used in any range of science, engineering, and social domains. Existing applications include business and environmental issues. == Method == SimDec operates on Monte Carlo simulation (or measured) data where both output and input values are recorded. At least one thousand observations (or simulated iterations) are typically recommended to preserve the readability of the resulting histograms. An outline of the decomposition algorithm, which is readily available in multiple programming languages, proceeds as follows: Select the input variables for decomposition. One can use sensitivity indices (see variance-based sensitivity analysis) to define the most influential variables for decomposition or choose them manually according to the decision-problem context (for example, only those input variables that the decision-maker can act upon). Two to three input variables, ordered by decreasing value of their sensitivity indices, usually provide the most meaningful decomposition results. Divide the inputs into states. The numeric ranges of the inputs are split into several intervals with an equal number of observations in each. For categorical variables, the categories represent states. Form scenarios. All combinations of states of the selected input variables produce unique scenarios or subsets of the data. For example, if the range of X2 is divided into low, medium and high, and X3 takes values of 1 or 2, six scenarios are formed: (i) X2 low & X3 = 1, (ii) X2 low & X3 = 2, (iii) X2 medium & X3 = 1, (iv) X2 medium & X3 = 2, (v) X2 high & X3 = 1, and (vi) X2 high & X3 = 2. Assign scenarios to each output value. The simulation data is used to define the scenario index for each simulation run. For example, if an X2 value falls into the low state and X3 is equal to 2, the corresponding scenario, defined in Step 3, is (ii). Color-code the output distribution. When all output values are assigned scenario indices, they are plotted as series in a stacked histogram, visually separated by color-coding. For ease of visual perception, the states of the most influential input variable are assigned distinct colors, and all the remaining partitions take shades of those colors (see Figure). All of these steps can be run automatically on the given data using the open-source SimDec packages currently available in Python, R, Julia, and Matlab. A SimDec template in Excel runs a Monte Carlo simulation of a spreadsheet model but possesses only a manual option for input selection. == How to read SimDec == === Histogram === Histogram is an approximate representation of the distribution of numerical data. Its horizontal axis shows the range of the variable of interest, and its vertical axis denotes count, also called frequency, or, if divided by the total number of data points, probability. The distribution alone can supply only limited information about the data – its minimum, maximum, and shape (where the most of data occurs). === Judging the importance of inputs === If an input variable has no effect on the output, its states (e.g., low & high) would lie on top of each other on the SimDec histogram, occupying fully overlapping ranges of the output. If an input variable has a strong effect and explains most of the variance of the output, the border between its states on the SimDec histogram would be vertical. Such visualization has an important decision-making implication – e.g., if the high state of X can be achieved, it would guarantee a certain range of Y. All cases in-between with low-to-strong effects would show a diagonal border between the states. The less they overlap, the larger the effect of X on Y. While the horizontal displacement of sub-distributions on the SimDec histogram is the key to interpreting the results, the vertical disposition of sub-distributions is just a technical matter of the order of plotting the series of the stacked histogram. === Exploring the interaction of inputs === When two or more input variables are used for decomposition, it becomes possible to examine their joint effects. A schematic visualization portrays how different types of joint effects of input variables on the output appear on SimDec visualization. Understanding the nature of interaction effects in a computational model and its behavior in general is crucial for effective decision-making. == Limitations == The SimDec method has several limitations: It is based on Monte Carlo simulation and thus requires running a computational model a thousand of times or more. To models that take hours to evaluate once, it would be impossible to use SimDec (unless a supercomputer and/or large of time are available). SimDec is based on a histogram, thus, for binary or categorical output variables, the visualization would be very limited (e.g., only a few bins). The more input variables one selects for the decomposition, the less readable the histogram becomes. Only cases with two and three input variables are presented in.

  Read more →
• 

  Semantic similarity network

  A semantic similarity network (SSN) is a special form of semantic network. designed to represent concepts and their semantic similarity. Its main contribution is reducing the complexity of calculating semantic distances. Bendeck (2004, 2008) introduced the concept of semantic similarity networks (SSN) as the specialization of a semantic network to measure semantic similarity from ontological representations. Implementations include genetic information handling. The concept is formally defined (Bendeck 2008) as a directed graph, with concepts represented as nodes and semantic similarity relations as edges. The relationships are grouped into relation types. The concepts and relations contain attribute values to evaluate the semantic similarity between concepts. The semantic similarity relationships of the SSN represent several of the general relationship types of the standard Semantic network, reducing the complexity of the (normally, very large) network for calculations of semantics. SSNs define relation types as templates (and taxonomy of relations) for semantic similarity attributes that are common to relations of the same type. SSN representation allows propagation algorithms to faster calculate semantic similarities, including stop conditions within a specified threshold. This reduces the computation time and power required for calculation. A more recent publications on Semantic Matching and Semantic Similarity Networks could be found in (Bendeck 2019). Specific Semantic Similarity Network application on healthcare was presented at the Healthcare information exchange Format (FHIR European Conference) 2019. The latest evolution in Artificial Intelligence (like ChatGPT, based on Large language model), relay strongly on evolutionary computation, the next level will be to include semantic unification (like in the Semantic Networks and this Semantic similarity network) to extend the current models with more powerful understanding tools.

  Read more →
• 

  Service-oriented software engineering

  Service-oriented software engineering (SOSE), also referred to as service engineering, is a software engineering methodology focused on the development of software systems by composition of reusable services (service-orientation) often provided by other service providers. Since it involves composition, it shares many characteristics of component-based software engineering, the composition of software systems from reusable components, but it adds the ability to dynamically locate necessary services at run-time. These services may be provided by others as web services, but the essential element is the dynamic nature of the connection between the service users and the service providers. == Service-oriented interaction pattern == There are three types of actors in a service-oriented interaction: service providers, service users and service registries. They participate in a dynamic collaboration which can vary from time to time. Service providers are software services that publish their capabilities and availability with service registries. Service users are software systems (which may be services themselves) that accomplish some task through the use of services provided by service providers. Service users use service registries to discover and locate the service providers they can use. This discovery and location occurs dynamically when the service user requests them from a service registry.

  Read more →
• 

  Leela Zero

  Leela Zero is a free and open-source computer Go program released on 25 October 2017. It is developed by Belgian programmer Gian-Carlo Pascutto, the author of chess engine Sjeng and Go engine Leela. Leela Zero's algorithm is based on DeepMind's 2017 paper about AlphaGo Zero. Unlike the original Leela, which has a lot of human knowledge and heuristics programmed into it, the program code in Leela Zero only knows the basic rules and nothing more. The knowledge that makes Leela Zero a strong player is contained in a neural network, which is trained based on the results of previous games that the program played. Leela Zero is trained by a distributed effort, which is coordinated at the Leela Zero website. Members of the community provide computing resources by running the client, which generates self-play games and submits them to the server. The self-play games are used to train newer networks. Generally, over 500 clients have connected to the server to contribute resources. The community has provided high quality code contributions as well. == Version history == Leela Zero finished third at the BerryGenomics Cup World AI Go Tournament in Fuzhou, Fujian, China on 28 April 2018. The New Yorker at the end of 2018 characterized Leela and Leela Zero as "the world’s most successful open-source Go engines". In early 2018, another team branched Leela Chess Zero from the same code base, also to verify the methods in the AlphaZero paper as applied to the game of chess. AlphaZero's use of Google TPUs was replaced by a crowd-sourcing infrastructure and the ability to use graphics card GPUs via the OpenCL library. Even so, it is expected to take a year of crowd-sourced training to make up for the dozen hours that AlphaZero was allowed to train for its chess match in the paper. The distributed training server was shut down on 2021-02-15, marking the end of Leela Zero project. The page now directs visitors to KataGo and SAI. The model sizes increased steadily over time. The first released model has hash name d645af97, size 1x8 (1 layer, 8 channels), and released at 2017-11-10 13:04. The last released model has hash name 0e9ea880, size 40x256, and was released at 2021-02-15 09:04. == Technology == Leela Zero is an (almost) exact replication of AlphaGo Zero in both training process and architecture. The training process is Monte-Carlo Tree Search with self-play, exactly the same as AlphaGo Zero. The architecture is the same as AlphaGo Zero (with one difference). Consider the last released model, 0e9ea880. It has 47 million parameters, and the following architecture: The stem of the network takes as input a 18x19x19 tensor representation of the Go board. 8 channels are the positions of the current player's stones from the last eight time steps. (1 if there is a stone, 0 otherwise. If the time step go before the beginning of the game, then 0 in all positions.) 8 channels are the positions of the other player's stones from the last eight time steps. 1 channel is all 1 if black is to move, and 0 otherwise. 1 channel is all 1 if white is to move, and 0 otherwise. (This channel is not present in the original AlphaGo Zero) The body is a ResNet with 40 residual blocks and 256 channels. There are two heads, a policy head and a value head. Policy head outputs a logit array of size 19 × 19 + 1 {\displaystyle 19\times 19+1} , representing the logit of making a move in one of the points, plus the logit of passing. Value head outputs a number in the range ( − 1 , + 1 ) {\displaystyle (-1,+1)} , representing the expected score for the current player. -1 represents current player losing, and +1 winning.

  Read more →
• 

  Radiant AI

  The Radiant AI is a technology developed by Bethesda Softworks for The Elder Scrolls video games. It allows non-player characters (NPCs) to make choices and engage in behaviors more complex than in past titles. The technology was developed for The Elder Scrolls IV: Oblivion and expanded in The Elder Scrolls V: Skyrim; it is also used in Fallout 3, Fallout: New Vegas and Fallout 4, also published by Bethesda, with 3 and 4 being developed by them as well. == Technology == The Radiant AI technology, as it evolved in its iteration developed for Skyrim, comprises two parts: === Radiant AI === The Radiant AI system deals with NPC interactions and behavior. It allows non-player characters to dynamically react to and interact with the world around them. General goals, such as "Eat in this location at 2pm" are given to NPCs, and NPCs are left to determine how to achieve them. The absence of individual scripting for each character allows for the construction of a world on a much larger scale than other games had developed, and aids in the creation of what Todd Howard described as an "organic feel" for the game. === Radiant Story === The Radiant Story system deals with how the game itself reacts to the player behavior, such as the creation of new dynamic quests. Dynamically generated quests are placed by the game in locations the player hasn't visited yet and are related to earlier adventures.

  Read more →