AI For Kids Google

AI For Kids Google — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Voice activity detection

Voice activity detection (VAD), also known as speech activity detection or speech detection, is the detection of the presence or absence of human speech, used in speech processing. The main uses of VAD are in speaker diarization, speech coding and speech recognition. It can facilitate speech processing, and can also be used to deactivate some processes during non-speech section of an audio session: it can avoid unnecessary coding/transmission of silence packets in Voice over Internet Protocol (VoIP) applications, saving on computation and on network bandwidth. VAD is an important enabling technology for a variety of speech-based applications. Therefore, various VAD algorithms have been developed that provide varying features and compromises between latency, sensitivity, accuracy and computational cost. Some VAD algorithms also provide further analysis, for example whether the speech is voiced, unvoiced or sustained. Voice activity detection is usually independent of language. It was first investigated for use on time-assignment speech interpolation (TASI) systems. == Algorithm overview == The typical design of a VAD algorithm is as follows: There may first be a noise reduction stage, e.g. via spectral subtraction. Then some features or quantities are calculated from a section of the input signal. A classification rule is applied to classify the section as speech or non-speech – often this classification rule finds when a value exceeds a certain threshold. There may be some feedback in this sequence, in which the VAD decision is used to improve the noise estimate in the noise reduction stage, or to adaptively vary the threshold(s). These feedback operations improve the VAD performance in non-stationary noise (i.e. when the noise varies a lot). A representative set of recently published VAD methods formulates the decision rule on a frame by frame basis using instantaneous measures of the divergence distance between speech and noise. The different measures which are used in VAD methods include spectral slope, correlation coefficients, log likelihood ratio, cepstral, weighted cepstral, and modified distance measures. Independently from the choice of VAD algorithm, a compromise must be made between having voice detected as noise, or noise detected as voice (between false positive and false negative). A VAD operating in a mobile phone must be able to detect speech in the presence of a range of very diverse types of acoustic background noise. In these difficult detection conditions it is often preferable that a VAD should fail-safe, indicating speech detected when the decision is in doubt, to lower the chance of losing speech segments. The biggest difficulty in the detection of speech in this environment is the very low signal-to-noise ratios (SNRs) that are encountered. It may be impossible to distinguish between speech and noise using simple level detection techniques when parts of the speech utterance are buried below the noise. == Applications == VAD is an integral part of different speech communication systems such as audio conferencing, echo cancellation, speech recognition, speech encoding, speaker recognition and hands-free telephony. In the field of multimedia applications, VAD allows simultaneous voice and data applications. Similarly, in Universal Mobile Telecommunications Systems (UMTS), it controls and reduces the average bit rate and enhances overall coding quality of speech. In cellular radio systems (for instance GSM and CDMA systems) based on Discontinuous Transmission (DTX) mode, VAD is essential for enhancing system capacity by reducing co-channel interference and power consumption in portable digital devices. In speech processing applications, voice activity detection plays an important role since non-speech frames are often discarded. For a wide range of applications such as digital mobile radio, Digital Simultaneous Voice and Data (DSVD) or speech storage, it is desirable to provide a discontinuous transmission of speech-coding parameters. Advantages can include lower average power consumption in mobile handsets, higher average bit rate for simultaneous services like data transmission, or a higher capacity on storage chips. However, the improvement depends mainly on the percentage of pauses during speech and the reliability of the VAD used to detect these intervals. On the one hand, it is advantageous to have a low percentage of speech activity. On the other hand, clipping, that is the loss of milliseconds of active speech, should be minimized to preserve quality. This is the crucial problem for a VAD algorithm under heavy noise conditions. === Use in telemarketing === One controversial application of VAD is in conjunction with predictive dialers used by telemarketing firms. In order to maximize agent productivity, telemarketing firms set up predictive dialers to call more numbers than they have agents available, knowing most calls will end up in either "Ring – No Answer" or answering machines. When a person answers, they typically speak briefly ("Hello", "Good evening", etc.) and then there is a brief period of silence. Answering machine messages are usually 3–15 seconds of continuous speech. By setting VAD parameters correctly, dialers can determine whether a person or a machine answered the call and, if it's a person, transfer the call to an available agent. If it detects an answering machine message, the dialer hangs up. Often, even when the system correctly detects a person answering the call, no agent may be available, resulting in a "silent call". Call screening with a multi-second message like "please say who you are, and I may pick up the phone" will frustrate such automated calls. == Performance evaluation == To evaluate a VAD, its output using test recordings is compared with those of an "ideal" VAD – created by hand-annotating the presence or absence of voice in the recordings. The performance of a VAD is commonly evaluated on the basis of the following four parameters: FEC (Front End Clipping): clipping introduced in passing from noise to speech activity; MSC (Mid Speech Clipping): clipping due to speech misclassified as noise; OVER: noise interpreted as speech due to the VAD flag remaining active in passing from speech activity to noise; NDS (Noise Detected as Speech): noise interpreted as speech within a silence period. Although the method described above provides useful objective information concerning the performance of a VAD, it is only an approximate measure of the subjective effect. For example, the effects of speech signal clipping can at times be hidden by the presence of background noise, depending on the model chosen for the comfort noise synthesis, so some of the clipping measured with objective tests is in reality not audible. It is therefore important to carry out subjective tests on VADs, the main aim of which is to ensure that the clipping perceived is acceptable. In VoIP applications, front-end clipping can be reduced by rewinding to shortly before the detection and sending very slightly delayed data. This kind of test requires a certain number of listeners to judge recordings containing the processing results of the VADs being tested, giving marks to several speech sequences on the following features: Quality; Comprehension difficulty; Audibility of clipping. These marks are then used to calculate average results for each of the features listed above, thus providing a global estimate of the behavior of the VAD being tested. To conclude, whereas objective methods are very useful in an initial stage to evaluate the quality of a VAD, subjective methods are more significant. As they require the participation of several people for a few days, increasing cost, they are generally only used when a proposal is about to be standardized. == Implementations == One early standard VAD is that developed by British Telecom for use in the Pan-European digital cellular mobile telephone service in 1991. It uses inverse filtering trained on non-speech segments to filter out background noise, so that it can then more reliably use a simple power-threshold to decide if a voice is present. The G.729 standard calculates the following features for its VAD: line spectral frequencies, full-band energy, low-band energy (<1 kHz), and zero-crossing rate. It applies a simple classification using a fixed decision boundary in the space defined by these features, and then applies smoothing and adaptive correction to improve the estimate. The GSM standard includes two VAD options developed by ETSI. Option 1 computes the SNR in nine bands and applies a threshold to these values. Option 2 calculates different parameters: channel power, voice metrics, and noise power. It then thresholds the voice metrics using a threshold that varies according to the estimated SNR. The Speex audio compression library uses a procedure named Improved Minima Controlled Recursive Averaging, which uses a smoothed representation of spectral pow
Read more →
Vector-field consistency

Vector-Field Consistency is a consistency model for replicated data (for example, objects), initially described in a paper which was awarded the best-paper prize in the ACM/IFIP/Usenix Middleware Conference 2007. It has since been enhanced for increased scalability and fault-tolerance in a recent paper. == Description == This consistency model was initially designed for replicated data management in ad hoc gaming in order to minimize bandwidth usage without sacrificing playability. Intuitively, it captures the notion that although players require, wish, and take advantage of information regarding the whole of the game world (as opposed to a restricted view to rooms, arenas, etc. of limited size employed in many multiplayer video games), they need to know information with greater freshness, frequency, and accuracy as other game entities are located closer and closer to the player's position. It prescribes a multidimensional divergence bounding scheme, based on a vector field that employs consistency vectors k=(θ,σ,ν), standing for maximum allowed time - or replica staleness, sequence - or missing updates, and value - or user-defined measured replica divergence, applied to all space coordinates in game scenario or world. The consistency vector-fields emanate from field-generators designated as pivots (for example, players) and field intensity attenuates as distance grows from these pivots in concentric or square-like regions. This consistency model unifies locality-awareness techniques employed in message routing and consistency enforcement for multiplayer games, with divergence bounding techniques traditionally employed in replicated database and web scenarios.
Read more →
Umbrella review

In medical research, an umbrella review is a review of systematic reviews or meta-analyses. They may also be called overviews of reviews, reviews of reviews, summaries of systematic reviews, or syntheses of reviews. Umbrella reviews are among the highest levels of evidence currently available in medicine. By summarizing information from multiple overview articles, umbrella reviews make it easier to review the evidence and allow for comparison of results between each of the individual reviews. Umbrella reviews may address a broader question than a typical review, such as discussing multiple different treatment comparisons instead of only one. They are especially useful for developing guidelines and clinical practice, and when comparing competing interventions.
Read more →
Metadirectory

A metadirectory system provides for the flow of data between one or more directory services and databases in order to maintain synchronization of that data. It is an important part of identity management systems. The data being synchronized typically are collections of entries that contain user profiles and possibly authentication or policy information. Most metadirectory deployments synchronize data into at least one LDAP-based directory server, to ensure that LDAP-based applications such as single sign-on and portal servers have access to recent data, even if the data is mastered in a non-LDAP data source. Metadirectory products support filtering and transformation of data in transit. Most identity management suites from commercial vendors include a metadirectory product, or a user provisioning product.
Read more →
Scale space

Scale-space theory is a framework for multi-scale signal representation developed by the computer vision, image processing and signal processing communities with complementary motivations from physics and biological vision. It is a formal theory for handling image structures at different scales, by representing an image as a one-parameter family of smoothed images, the scale-space representation, parametrized by the size of the smoothing kernel used for suppressing fine-scale structures. The parameter t {\displaystyle t} in this family is referred to as the scale parameter, with the interpretation that image structures of spatial size smaller than about t {\displaystyle {\sqrt {t}}} have largely been smoothed away in the scale-space level at scale t {\displaystyle t} . The main type of scale space is the linear (Gaussian) scale space, which has wide applicability as well as the attractive property of being possible to derive from a small set of scale-space axioms. The corresponding scale-space framework encompasses a theory for Gaussian derivative operators, which can be used as a basis for expressing a large class of visual operations for computerized systems that process visual information. This framework also allows visual operations to be made scale invariant, which is necessary for dealing with the size variations that may occur in image data, because real-world objects may be of different sizes and in addition the distance between the object and the camera may be unknown and may vary depending on the circumstances. == Definition == The notion of scale space applies to signals of arbitrary numbers of variables. The most common case in the literature applies to two-dimensional images, which is what is presented here. Consider a given image f {\displaystyle f} where f ( x , y ) {\displaystyle f(x,y)} is the greyscale value of the pixel at position ( x , y ) {\displaystyle (x,y)} . The linear (Gaussian) scale-space representation of f {\displaystyle f} is a family of derived signals L ( x , y ; t ) {\displaystyle L(x,y;t)} defined by the convolution of f ( x , y ) {\displaystyle f(x,y)} with the two-dimensional Gaussian kernel g ( x , y ; t ) = 1 2 π t e − ( x 2 + y 2 ) / 2 t {\displaystyle g(x,y;t)={\frac {1}{2\pi t}}e^{-(x^{2}+y^{2})/2t}\,} such that L ( ⋅ , ⋅ ; t ) = g ( ⋅ , ⋅ ; t ) ∗ f ( ⋅ , ⋅ ) , {\displaystyle L(\cdot ,\cdot ;t)\ =g(\cdot ,\cdot ;t)f(\cdot ,\cdot ),} where the semicolon in the argument of L {\displaystyle L} implies that the convolution is performed only over the variables x , y {\displaystyle x,y} , while the scale parameter t {\displaystyle t} after the semicolon just indicates which scale level is being defined. This definition of L {\displaystyle L} works for a continuum of scales t ≥ 0 {\displaystyle t\geq 0} , but typically only a finite discrete set of levels in the scale-space representation would be actually considered. The scale parameter t = σ 2 {\displaystyle t=\sigma ^{2}} is the variance of the Gaussian filter and as a limit for t = 0 {\displaystyle t=0} the filter g {\displaystyle g} becomes an impulse function such that L ( x , y ; 0 ) = f ( x , y ) , {\displaystyle L(x,y;0)=f(x,y),} that is, the scale-space representation at scale level t = 0 {\displaystyle t=0} is the image f {\displaystyle f} itself. As t {\displaystyle t} increases, L {\displaystyle L} is the result of smoothing f {\displaystyle f} with a larger and larger filter, thereby removing more and more of the details that the image contains. Since the standard deviation of the filter is σ = t {\displaystyle \sigma ={\sqrt {t}}} , details that are significantly smaller than this value are to a large extent removed from the image at scale parameter t {\displaystyle t} , see the following figures and for graphical illustrations. === Why a Gaussian filter? === When faced with the task of generating a multi-scale representation one may ask: could any filter g of low-pass type and with a parameter t which determines its width be used to generate a scale space? The answer is no, as it is of crucial importance that the smoothing filter does not introduce new spurious structures at coarse scales that do not correspond to simplifications of corresponding structures at finer scales. In the scale-space literature, a number of different ways have been expressed to formulate this criterion in precise mathematical terms. The conclusion from several different axiomatic derivations that have been presented is that the Gaussian scale space constitutes the canonical way to generate a linear scale space, based on the essential requirement that new structures must not be created when going from a fine scale to any coarser scale. Conditions, referred to as scale-space axioms, that have been used for deriving the uniqueness of the Gaussian kernel include linearity, shift invariance, semi-group structure, non-enhancement of local extrema, scale invariance and rotational invariance. In the works, the uniqueness claimed in the arguments based on scale invariance has been criticized, and alternative self-similar scale-space kernels have been proposed. The Gaussian kernel is, however, a unique choice according to the scale-space axiomatics based on causality or non-enhancement of local extrema. === Alternative definition === Equivalently, the scale-space family can be defined as the solution of the diffusion equation (for example in terms of the heat equation), ∂ t L = 1 2 ∇ 2 L , {\displaystyle \partial _{t}L={\frac {1}{2}}\nabla ^{2}L,} with initial condition L ( x , y ; 0 ) = f ( x , y ) {\displaystyle L(x,y;0)=f(x,y)} . This formulation of the scale-space representation L means that it is possible to interpret the intensity values of the image f as a "temperature distribution" in the image plane and that the process that generates the scale-space representation as a function of t corresponds to heat diffusion in the image plane over time t (assuming the thermal conductivity of the material equal to the arbitrarily chosen constant ⁠1/2⁠). Although this connection may appear superficial for a reader not familiar with differential equations, it is indeed the case that the main scale-space formulation in terms of non-enhancement of local extrema is expressed in terms of a sign condition on partial derivatives in the 2+1-D volume generated by the scale space, thus within the framework of partial differential equations. Furthermore, a detailed analysis of the discrete case shows that the diffusion equation provides a unifying link between continuous and discrete scale spaces, which also generalizes to nonlinear scale spaces, for example, using anisotropic diffusion. Hence, one may say that the primary way to generate a scale space is by the diffusion equation, and that the Gaussian kernel arises as the Green's function of this specific partial differential equation. == Motivations == The motivation for generating a scale-space representation of a given data set originates from the basic observation that real-world objects are composed of different structures at different scales. This implies that real-world objects, in contrast to idealized mathematical entities such as points or lines, may appear in different ways depending on the scale of observation. For example, the concept of a "tree" is appropriate at the scale of meters, while concepts such as leaves and molecules are more appropriate at finer scales. For a computer vision system analysing an unknown scene, there is no way to know a priori what scales are appropriate for describing the interesting structures in the image data. Hence, the only reasonable approach is to consider descriptions at multiple scales in order to be able to capture the unknown scale variations that may occur. Taken to the limit, a scale-space representation considers representations at all scales. Another motivation to the scale-space concept originates from the process of performing a physical measurement on real-world data. In order to extract any information from a measurement process, one has to apply operators of non-infinitesimal size to the data. In many branches of computer science and applied mathematics, the size of the measurement operator is disregarded in the theoretical modelling of a problem. The scale-space theory on the other hand explicitly incorporates the need for a non-infinitesimal size of the image operators as an integral part of any measurement as well as any other operation that depends on a real-world measurement. There is a close link between scale-space theory and biological vision. Many scale-space operations show a high degree of similarity with receptive field profiles recorded from the mammalian retina and the first stages in the visual cortex. In these respects, the scale-space framework can be seen as a theoretically well-founded paradigm for early vision, which in addition has been thoroughly tested by algorithms and experiments. == Gaussian derivatives == At any scale in scale space, we c
Read more →
Information flow

In discourse-based grammatical theory, information flow is any tracking of referential information by speakers. Information may be new, i.e., just introduced into the conversation; given, i.e., already active in the speakers' consciousness; or old, i.e., no longer active. The various types of activation, and how these are defined, are model-dependent. Information flow affects grammatical structures such as: Word order (topic, focus, and afterthought constructions). Active, passive, or middle voice. Choice of deixis, such as articles; "medial" deictics such as Spanish ese and Japanese sore are generally determined by the familiarity of a referent rather than by physical distance. Overtness of information, such as whether an argument of a verb is indicated by a lexical noun phrase, a pronoun, or not mentioned at all. Clefting: Splitting a single clause into two clauses, each with its own verb, e.g. ‘The chicken turtles tasted like chicken.’ becomes ‘It was the chicken turtle | that tasted like chicken.’ In this case, clefting is used to shift the focus of the sentence to the subject, the chicken turtle. Front focus: Placing at the start (front) of a sentence information that would normally occur later in the sentence, to give it extra prominence. For example, in pop culture, Yoda's speech often utilizes such syntactic construction, such as when he says 'much to learn you still have' to Luke Skywalker. End focus (or end weight): Given or familiar information followed by new information. This gives prominence to the final part of the sentences and can enable suspense to build, e.g. ‘Through the door came a gigantic wolf’.(Umer Prince)
Read more →
Technical data management system

A technical data management system (TDMS) is a document management system (DMS) pertaining to the management of technical and engineering drawings and documents. Often the data are contained in 'records' of various forms, such as on paper, microfilms or digital media. Hence technical data management is also concerned with record management involving technical data. Technical document management systems are used within large organisations with large scale projects involving engineering. For example, a TDMS can be used for integrated steel plants (ISP), automobile factories, aero-space facilities, infrastructure companies, city corporations, research organisations, etc. In such organisations, technical archives or technical documentation centres are created as central facilities for effective management of technical data and records. TDMS functions are similar to that of conventional archive functions in concepts, except that the archived materials in this case are essentially engineering drawings, survey maps, technical specifications, plant and equipment data sheets, feasibility reports, project reports, operation and maintenance manuals, standards, etc. Document registration, indexing, repository management, reprography, etc. are parts of TDMS. Various kinds of sophisticated technologies such as document scanners, microfilming and digitization camera units, wide format printers, digital plotters, software, etc. are available, making TDMS functions an easier process than previous times. == Constituents of a technical data management system == Technical data refers to both scientific and technical information recorded and presented in any form or manner (excluding financial and management information). A Technical Data Management System is created within an organisation for archiving and sharing information such as technical specifications, datasheets and drawings. Similar to other types of data management system, a Technical Data Management System consists of the 4 crucial constituents mentioned below. === Data planning === Data plans (long-term or short-term) are constructed as the first essential step of a proper and complete TDMS. It is created to ultimately help with the 3 other constituents, data acquisition, data management and data sharing. A proper data plan should not exceed 2 pages and should address the following basics: Types of data (samples, experiment results, reports, drawings, etc.) and metadata (data that summarizes and describes other data. In this case, it refers to details such as sample sizes, experiment conditions and procedures, dates of reports, explanations of drawings, etc.) Means of researches and collections of data (field works, experiments in production lines, etc.) Costs of researches Policies for access, sharing (re-use within the organisation and re-distribution to the public) Proposals for archiving data and maintaining access to it === Data acquisition === Raw data is collected from primary sites of the organisations through the use of modern technologies. Please reference the table below for examples. The data collected is then transferred to technical data centres for data management. === Data management === After data acquisition, data is sorted out, whilst useful data is archived, unwanted data is disposed. When managing and archiving data, the features below of the data are considered. Names, labels, values and descriptions for variables and records. (In the case of TDMS, one example is names of equipments on an equipment datasheet) Derived data from the original data, with code, algorithm or command file used to create them. (In the case of TDMS, one example is an expectation report derived from the analysis of an equipment datasheet) Metadata associates with the data being archived === Data sharing === Archived and managed data are accessible to rightful entities. A proper and complete TDMS should share data to a suitable extent, under suitable security, in order to achieve optimal usage of data within the organisation. It aims for easy access when reused by other researchers and hence it enhances other research processes. Data is often referred in other tests and technical specifications, where new analysis is generated, managed and archived again. As a result, data is flowing within the organisation under effective management through the use of TDMS. == Advantages and disadvantages of usage of technical data management systems == There are strengths and weakness when using technical data management systems (TDMS) to archive data. Some of the advantages and disadvantages are listed below. === Advantages === ==== 1. Faster and easier data management ==== Since TDMS is integrated into the organisation's systems, whenever workers develop data files (SolidWorks, AutoCAD, Microsoft Word, etc.), they can also archive and manage data, linking what they need to their current work, at the same time they can also update the archives with useful data. This speeds up working processes and makes them more efficient. ==== 2. Increased security ==== All data files are centralized, hence internal and external data leakages are less likely to happen, and the data flow is more closely monitored. As a result, data in the organisation is more secured. ==== 3. Increased collaboration within the organisation ==== Since the data files are centralized and the data flow within the organisation increases, researchers and workers within the organisation are able to work on joint projects. More complex tasks can be performed for higher yields. ==== 4. Compatible to various formats of data ==== TDMS is compatible to many formats of data, from basic data like Microsoft Words to complex data like voice data. This enhances the quality of the management of data archived. === Disadvantages === ==== 1. Higher financial costs ==== Implementing TDMS into the organisation's systems involves monetary costs. Maintenance costs certain amount of human resources and money as well. These resources involve opportunity costs as they can be utilized in other aspects. ==== 2. Lower stability ==== Since TDMS manages and centralizes all the data the organisation processes, it links the working processes within the whole organisation together. It also increases the vulnerability of the organisation data network. If TDMS is not stable enough or when it is exposed to hacker and virus attacks, the organisation's data flow might shut down completely, affecting the work in an organisation-wide scale and leading to a lower stability as results. == Comparison between traditional data management approaches and technical data management systems == Test engineers and researchers are facing great challenges in turning complex test results and simulation data into usable information for higher yields of firms. These challenges are listed below. Increase in complication of designs Reduced in time and budgets available Higher quality is demanded === Traditional data management approaches === Many organisations are still applying the conventional file management systems, due to the difficulty in building a proper and complete archives for data management. The first approach is the simple file-folder system. This costs the problem of ineffectiveness as workers and researchers have to manually go through numerous layers of systems and files for the target data. Moreover, the target data may contain files with different formats and these files may not be stored in the same machine. These files are also easily lost if renamed or moved to another location. The second approach is conventional databases such as Oracle. These databases are capable of enabling easy search and access of data. However, a great drawback is that huge effort for preparing and modeling the data is required. For large-scale projects, huge monetary costs are induced, and extra IT human resources must be employed for constant handling, expanding and maintaining the inflexible system, which is custom for specific tasks, instead of all tasks. In the long-term, it is not cost-effective. === Technical data management systems (TDMS) === TDMS is developed based on 3 principles, flexible and organized file storage, self-scaling hybrid data index, and an interactive post-processing environment. The system in practical, mainly consists of 3 components, data files with essential and relevant Metadata, data finders for organizing and managing data regardless of files formats, and, a software of searching, analyzing and reporting. With metadata attached to original data files, the data finder can identify different related data files during searches, even if they are in different file formats. TDMS hence allows researchers to search for data like browsing the Internet. Last but not least, it can adapt to changes and update itself according to the changes, unlike databases. == Comparison between strong information systems and weak information systems == Complex organizations may need large amounts
Read more →
Wiki survey

Wiki surveys or wikisurveys are a software-based survey method that crowdsource discussions and help participants to find areas of agreement. Other names include bridging systems and collective response systems. The approach, inspired by Wikipedia, is to open up surveys where participants can shape the questions, instead of traditional 'closed' surveys where participants can only respond to the questions asked. Wiki surveys have been used for purposes including facilitating deliberative democracy, crowdsourcing opinions from experts and figuring out common beliefs on a given topic. A notable usage of wiki surveys is in Taiwan's government system, where citizens can participate in crowdsourced lawmaking through Pol.is wiki surveys. == Implementations == === All Our Ideas === All Our Ideas founders coined the term "wiki survey," explaining how they took inspiration from the organic evolution of Wikipedia and hoped to create something similar for surveys. They hosted 5000 surveys between 2010 and 2014. A 2020 survey using the tool found 3 of its top 10 findings were user-generated. === Decidim === Decidim has been used by governments throughout Spain and Europe to help with participatory budgeting and other public policy decisions. === Polis === Polis (also known as Pol.is) was developed in 2012. The focus of Polis is to project participants into an 'opinion space' where they can see how their voting behavior compares to other participants. The opinion space clusters participants into groups of similar opinion and is designed in a way to avoid tyranny of the majority by being able to include groups that have small numbers of participants. The questions participants are presented with are agree/disagree/pass on a single 'comment' submitted by a participant. The code for Polis is free and open-source software under the GNU AGPL. === Remesh === Remesh was founded in 2013 and has partnered with the United Nations and Alliance for Middle East Peace efforts to bring peaceful resolutions to conflicts. Participants are anonymous and the algorithm can be fine-tuned to better understand local dialects in specific regions. == Examples == PlaNYC used All Our Ideas to gather ideas on how to establish New York City's sustainability plan vTaiwan, a citizen-lead government process in Taiwan, uses Polis for enabling large amounts of citizens to deliberate and consequently provide input on Taiwan's legislative decisions OECD used All Our Ideas to gather ideas from the public prior to meeting for a forum and meeting on which skills are most important to invest in for the 21st century March On, an offshoot of the Women's March Movement, used Polis to understand the opinions of people wanting to support the movement Residents of Harrogate use Polis to debate issues in their community, with the results being released publicly to everyone == Characteristics == Wiki surveys often have these three characteristics: === Collaborativeness === Wiki surveys allow participants to contribute questions, as well as answer questions created by its participants. === Adaptivity === Wiki surveys adapt to elicit the most useful information from its participants. One example involves changing the ordering of questions based on the voting behavior of previous participants so as to maximize consensus. The heuristic determining the ordering of questions highly values showing the comments that have been voted on the least. === 'Greediness' === In the context of wiki surveys, 'greediness' simply means making full use of information that participants are willing to provide. Wiki surveys do not require participants to answer a fixed amount of questions, so participants can answer as little or as much as they want. This is intended to be more efficient in capturing participants' preferences by allowing more organic sharing of their perspectives. == Traditional survey methods vs. wiki surveys == Questions in traditional survey methods fall into two categories: Open and closed questions. Open questions ask the person taking the survey to write an open response while closed questions give a fixed set of responses to select from. Wiki surveys are like a hybrid of the two, enabling insightful consensus in certain situations where traditional survey methods may lack. Closed questions are easy to analyze quantitively, but the limited options to select from for a given question may cause bias. Open questions are not as subject to bias, but are difficult to analyze quantitatively at scale. Wiki surveys allow for open responses by the users' contribution of survey questions (also called 'items'), and uses machine learning techniques to (at least partially) automate the quantitative analysis of the responses to those questions.
Read more →
Object co-segmentation

In computer vision, object co-segmentation is a special case of image segmentation, which is defined as jointly segmenting semantically similar objects in multiple images or video frames. == Challenges == It is often challenging to extract segmentation masks of a target/object from a noisy collection of images or video frames, which involves object discovery coupled with segmentation. A noisy collection implies that the object/target is present sporadically in a set of images or the object/target disappears intermittently throughout the video of interest. Early methods typically involve mid-level representations such as object proposals. == Dynamic Markov networks-based methods == A joint object discover and co-segmentation method based on coupled dynamic Markov networks has been proposed recently, which claims significant improvements in robustness against irrelevant/noisy video frames. Unlike previous efforts which conveniently assumes the consistent presence of the target objects throughout the input video, this coupled dual dynamic Markov network based algorithm simultaneously carries out both the detection and segmentation tasks with two respective Markov networks jointly updated via belief propagation. Specifically, the Markov network responsible for segmentation is initialized with superpixels and provides information for its Markov counterpart responsible for the object detection task. Conversely, the Markov network responsible for detection builds the object proposal graph with inputs including the spatio-temporal segmentation tubes. == Graph cut-based methods == Graph cut optimization is a popular tool in computer vision, especially in earlier image segmentation applications. As an extension of regular graph cuts, multi-level hypergraph cut is proposed to account for more complex high order correspondences among video groups beyond typical pairwise correlations. With such hypergraph extension, multiple modalities of correspondences, including low-level appearance, saliency, coherent motion and high level features such as object regions, could be seamlessly incorporated in the hyperedge computation. In addition, as a core advantage over co-occurrence based approach, hypergraph implicitly retains more complex correspondences among its vertices, with the hyperedge weights conveniently computed by eigenvalue decomposition of Laplacian matrices. == CNN/LSTM-based methods == In action localization applications, object co-segmentation is also implemented as the segment-tube spatio-temporal detector. Inspired by the recent spatio-temporal action localization efforts with tubelets (sequences of bounding boxes), Le et al. present a new spatio-temporal action localization detector Segment-tube, which consists of sequences of per-frame segmentation masks. This Segment-tube detector can temporally pinpoint the starting/ending frame of each action category in the presence of preceding/subsequent interference actions in untrimmed videos. Simultaneously, the Segment-tube detector produces per-frame segmentation masks instead of bounding boxes, offering superior spatial accuracy to tubelets. This is achieved by alternating iterative optimization between temporal action localization and spatial action segmentation. The proposed segment-tube detector is illustrated in the flowchart on the right. The sample input is an untrimmed video containing all frames in a pair figure skating video, with only a portion of these frames belonging to a relevant category (e.g., the DeathSpirals). Initialized with saliency based image segmentation on individual frames, this method first performs temporal action localization step with a cascaded 3D CNN and LSTM, and pinpoints the starting frame and the ending frame of a target action with a coarse-to-fine strategy. Subsequently, the segment-tube detector refines per-frame spatial segmentation with graph cut by focusing on relevant frames identified by the temporal action localization step. The optimization alternates between the temporal action localization and spatial action segmentation in an iterative manner. Upon practical convergence, the final spatio-temporal action localization results are obtained in the format of a sequence of per-frame segmentation masks (bottom row in the flowchart) with precise starting/ending frames.
Read more →
Novell File Reporter

Novell File Reporter (NFR) is software that allows network administrators to identify files stored on the network and generates reports regarding the size of individual files, file type, when files were last accessed, and where duplicates exist. Additionally, the File Reporter tracks storage volume capacity and usage. It is a component of the Novell File Management Suite. == How it works == Novell File Reporter examines and reports on terabytes of data via a central reporting engine (NFR Engine) and distributed agents (NFR Agents). The NFR Engine schedules the scans of file instances conducted by NFR Agents, processes and compiles the scans for reporting purposes, and provides report information to the user interface. In addition to the standard reports it can generate, the NFR Engine can also produce "trigger reports" in response to specific events (a server volume crossing a capacity threshold, for example). Accordingly, the NFR Engine monitors the data gathered by the NFR Agents in order to identify these "triggers." The NFR Engine when working in either eDirectory or Active Directory connects to the directory via a Directory Services Interface (DSI) and thus can monitor and check file permissions.
Read more →
Relational data stream management system

A relational data stream management system (RDSMS) is a distributed, in-memory data stream management system (DSMS) that is designed to use standards-compliant SQL queries to process unstructured and structured data streams in real-time. Unlike SQL queries executed in a traditional RDBMS, which return a result and exit, SQL queries executed in a RDSMS do not exit, generating results continuously as new data become available. Continuous SQL queries in a RDSMS use the SQL Window function to analyze, join and aggregate data streams over fixed or sliding windows. Windows can be specified as time-based or row-based. == RDSMS SQL Query Examples == Continuous SQL queries in a RDSMS conform to the ANSI SQL standards. The most common RDSMS SQL query is performed with the declarative SELECT statement. A continuous SQL SELECT operates on data across one or more data streams, with optional keywords and clauses that include FROM with an optional JOIN subclause to specify the rules for joining multiple data streams, the WHERE clause and comparison predicate to restrict the records returned by the query, GROUP BY to project streams with common values into a smaller set, HAVING to filter records resulting from a GROUP BY, and ORDER BY to sort the results. The following is an example of a continuous data stream aggregation using a SELECT query that aggregates a sensor stream from a weather monitoring station. The SELECTquery aggregates the minimum, maximum and average temperature values over a one-second time period, returning a continuous stream of aggregated results at one second intervals. RDSMS SQL queries also operate on data streams over time or row-based windows. The following example shows a second continuous SQL query using the WINDOW clause with a one-second duration. The WINDOW clause changes the behavior of the query, to output a result for each new record as it arrives. Hence the output is a stream of incrementally updated results with zero result latency.
Read more →
Source criticism

Source criticism (or information evaluation) is the process of evaluating an information source, i.e.: a document, a person, a speech, a fingerprint, a photo, an observation, or anything used in order to obtain knowledge. In relation to a given purpose, a given information source may be more or less valid, reliable or relevant. Broadly, "source criticism" is the interdisciplinary study of how information sources are evaluated for given tasks. == Meaning == Problems in translation: The Danish word kildekritik, like the Norwegian word kildekritikk and the Swedish word källkritik, derived from the German Quellenkritik and is closely associated with the German historian Leopold von Ranke (1795–1886). Historian Wolfgang Hardtwig wrote: His [Ranke's] first work Geschichte der romanischen und germanischen Völker von 1494–1514 (History of the Latin and Teutonic Nations from 1494 to 1514) (1824) was a great success. It already showed some of the basic characteristics of his conception of Europe, and was of historiographical importance particularly because Ranke made an exemplary critical analysis of his sources in a separate volume, Zur Kritik neuerer Geschichtsschreiber (On the Critical Methods of Recent Historians). In this work he raised the method of textual criticism used in the late eighteenth century, particularly in classical philology to the standard method of scientific historical writing. (Hardtwig, 2001, p. 12739) Historical theorist Chris Lorenz wrote: The larger part of the nineteenth and twentieth centuries would be dominated by the research-oriented conception of historical method of the so-called Historical School in Germany, led by historians as Leopold Ranke and Berthold Niebuhr. Their conception of history, long been regarded as the beginning of modern, 'scientific' history, harked back to the 'narrow' conception of historical method, limiting the methodical character of history to source criticism. (Lorenz, 2001) In the early 21st century, source criticism is a growing field in, among other fields, library and information science. In this context source criticism is studied from a broader perspective than just, for example, history, classical philology, or biblical studies (but there, too, it has more recently received new attention). == Principles == The following principles are from two Scandinavian textbooks on source criticism, written by the historians Olden-Jørgensen (1998) and Thurén (1997): Human sources may be relics (e.g. a fingerprint) or narratives (e.g. a statement or a letter). Relics are more credible sources than narratives. A given source may be forged or corrupted; strong indications of the originality of the source increases its reliability. The closer a source is to the event which it purports to describe, the more one can trust it to give an accurate description of what really happened A primary source is more reliable than a secondary source, which in turn is more reliable than a tertiary source and so on. If a number of independent sources contain the same message, the credibility of the message is strongly increased. The tendency of a source is its motivation for providing some kind of bias. Tendencies should be minimized or supplemented with opposite motivations. If it can be demonstrated that the witness (or source) has no direct interest in creating bias, the credibility of the message is increased. Two other principles are: Knowledge of source criticism cannot substitute for subject knowledge: "Because each source teaches you more and more about your subject, you will be able to judge with ever-increasing precision the usefulness and value of any prospective source. In other words, the more you know about the subject, the more precisely you can identify what you must still find out". (Bazerman, 1995, p. 304). The reliability of a given source is relative to the questions put to it. "The empirical case study showed that most people find it difficult to assess questions of cognitive authority and media credibility in a general sense, for example, by comparing the overall credibility of newspapers and the Internet. Thus these assessments tend to be situationally sensitive. Newspapers, television and the Internet were frequently used as sources of orienting information, but their credibility varied depending on the actual topic at hand" (Savolainen, 2007). The following questions are often good ones to ask about any source according to the American Library Association (1994) and Engeldinger (1988): How was the source located? What type of source is it? Who is the author and what are the qualifications of the author in regard to the topic that is discussed? When was the information published? In which country was it published? What is the reputation of the publisher? Does the source show a particular cultural or political bias? For literary sources complementing criteria are: Does the source contain a bibliography? Has the material been reviewed by a group of peers, or has it been edited? How does the article/book compare with similar articles/books? == Levels of generality == Some principles of source criticism are universal, other principles are specific for certain kinds of information sources. There is today no consensus about the similarities and differences between source criticism in the natural science and humanities. Logical positivism claimed that all fields of knowledge were based on the same principles. Much of the criticism of logical positivism claimed that positivism is the basis of the sciences, whereas hermeneutics is the basis of the humanities. This was, for example, the position of Jürgen Habermas. A newer position, in accordance with, among others, Hans-Georg Gadamer and Thomas Kuhn, understands both science and humanities as determined by researchers' preunderstanding and paradigms. Hermeneutics is thus a universal theory. The difference is, however, that the sources of the humanities are themselves products of human interests and preunderstanding, whereas the sources of the natural sciences are not. Humanities are thus "doubly hermeneutic". Natural scientists, however, are also using human products (such as scientific papers) which are products of preunderstanding (and can lead to, for example, academic fraud). == Contributing fields == === Epistemology === Epistemological theories are the basic theories about how knowledge is obtained and are thus the most general theories about how to evaluate information sources. Empiricism evaluates sources by considering the observations (or sensations) on which they are based. Sources without basis in experience are not seen as valid. Rationalism provides low priority to sources based on observations. In order to be meaningful, observations must be explained by clear ideas or concepts. It is the logical structure and the well definedness that is in focus in evaluating information sources from the rationalist point of view. Historicism evaluates information sources on the basis of their reflection of their sociocultural context and their theoretical development. Pragmatism evaluate sources on the basis of how their values and usefulness to accomplish certain outcomes. Pragmatism is skeptical about claimed neutral information sources. The evaluation of knowledge or information sources cannot be more certain than is the construction of knowledge. If one accepts the principle of fallibilism then one also has to accept that source criticism can never 100% verify knowledge claims. As discussed in the next section, source criticism is intimately linked to scientific methods. The presence of fallacies of argument in sources is another kind of philosophical criterion for evaluating sources. Fallacies are presented by Walton (1998). Among the fallacies are the ad hominem fallacy (the use of personal attack to try to undermine or refute a person's argument) and the straw man fallacy (when one arguer misrepresents another's position to make it appear less plausible than it really is, in order more easily to criticize or refute it.) === Research methodology === Research methods are methods used to produce scholarly knowledge. The methods that are relevant for producing knowledge are also relevant for evaluating knowledge. An example of a book that turns methodology upside-down and uses it to evaluate produced knowledge is Katzer; Cook & Crouch (1998). === Science studies === Studies of quality evaluation processes such as peer review, book reviews and of the normative criteria used in evaluation of scientific and scholarly research. Another field is the study of scientific misconduct. Harris (1979) provides a case study of how a famous experiment in psychology, Little Albert, has been distorted throughout the history of psychology, starting with the author (Watson) himself, general textbook authors, behavior therapists, and a prominent learning theorist. Harris proposes possible causes for these distortions and analyzes the Albert study as an ex
Read more →
Tensor operator

In pure and applied mathematics, quantum mechanics and computer graphics, a tensor operator generalizes the notion of operators which are scalars and vectors. A special class of these are spherical tensor operators which apply the notion of the spherical basis and spherical harmonics. The spherical basis closely relates to the description of angular momentum in quantum mechanics and spherical harmonic functions. The coordinate-free generalization of a tensor operator is known as a representation operator. == The general notion of scalar, vector, and tensor operators == In quantum mechanics, physical observables that are scalars, vectors, and tensors, must be represented by scalar, vector, and tensor operators, respectively. Whether something is a scalar, vector, or tensor depends on how it is viewed by two observers whose coordinate frames are related to each other by a rotation. Alternatively, one may ask how, for a single observer, a physical quantity transforms if the state of the system is rotated. Consider, for example, a system consisting of a molecule of mass M {\displaystyle M} , traveling with a definite center of mass momentum, p z ^ {\displaystyle p{\mathbf {\hat {z}} }} , in the z {\displaystyle z} direction. If we rotate the system by 90 ∘ {\displaystyle 90^{\circ }} about the y {\displaystyle y} axis, the momentum will change to p x ^ {\displaystyle p{\mathbf {\hat {x}} }} , which is in the x {\displaystyle x} direction. The center-of-mass kinetic energy of the molecule will, however, be unchanged at p 2 / 2 M {\displaystyle p^{2}/2M} . The kinetic energy is a scalar and the momentum is a vector, and these two quantities must be represented by a scalar and a vector operator, respectively. By the latter in particular, we mean an operator whose expected values in the initial and the rotated states are p z ^ {\displaystyle p{\mathbf {\hat {z}} }} and p x ^ {\displaystyle p{\mathbf {\hat {x}} }} . The kinetic energy on the other hand must be represented by a scalar operator, whose expected value must be the same in the initial and the rotated states. In the same way, tensor quantities must be represented by tensor operators. An example of a tensor quantity (of rank two) is the electrical quadrupole moment of the above molecule. Likewise, the octupole and hexadecapole moments would be tensors of rank three and four, respectively. Other examples of scalar operators are the total energy operator (more commonly called the Hamiltonian), the potential energy, and the dipole-dipole interaction energy of two atoms. Examples of vector operators are the momentum, the position, the orbital angular momentum, L {\displaystyle {\mathbf {L} }} , and the spin angular momentum, S {\displaystyle {\mathbf {S} }} . (Fine print: Angular momentum is a vector as far as rotations are concerned, but unlike position or momentum it does not change sign under space inversion, and when one wishes to provide this information, it is said to be a pseudovector.) Scalar, vector and tensor operators can also be formed by products of operators. For example, the scalar product L ⋅ S {\displaystyle {\mathbf {L} }\cdot {\mathbf {S} }} of the two vector operators, L {\displaystyle {\mathbf {L} }} and S {\displaystyle {\mathbf {S} }} , is a scalar operator, which figures prominently in discussions of the spin–orbit interaction. Similarly, the quadrupole moment tensor of our example molecule has the nine components Q i j = ∑ α q α ( 3 r α , i r α , j − r α 2 δ i j ) . {\displaystyle Q_{ij}=\sum _{\alpha }q_{\alpha }\left(3r_{\alpha ,i}r_{\alpha ,j}-r_{\alpha }^{2}\delta _{ij}\right).} Here, the indices i {\displaystyle i} and j {\displaystyle j} can independently take on the values 1, 2, and 3 (or x {\displaystyle x} , y {\displaystyle y} , and z {\displaystyle z} ) corresponding to the three Cartesian axes, the index α {\displaystyle \alpha } runs over all particles (electrons and nuclei) in the molecule, q α {\displaystyle q_{\alpha }} is the charge on particle α {\displaystyle \alpha } , and r α , i {\displaystyle r_{\alpha ,i}} is the i {\displaystyle i} -th component of the position of this particle. Each term in the sum is a tensor operator. In particular, the nine products r α , i r α , j {\displaystyle r_{\alpha ,i}r_{\alpha ,j}} together form a second rank tensor, formed by taking the outer product of the vector operator r α {\displaystyle {\mathbf {r} }_{\alpha }} with itself. == Rotations of quantum states == === Quantum rotation operator === The rotation operator about the unit vector n (defining the axis of rotation) through angle θ is U [ R ( θ , n ^ ) ] = exp ⁡ ( − i θ ℏ n ^ ⋅ J ) {\displaystyle U[R(\theta ,{\hat {\mathbf {n} }})]=\exp \left(-{\frac {i\theta }{\hbar }}{\hat {\mathbf {n} }}\cdot \mathbf {J} \right)} where J = (Jx, Jy, Jz) are the rotation generators (also the angular momentum matrices): J x = ℏ 2 ( 0 1 0 1 0 1 0 1 0 ) J y = ℏ 2 ( 0 i 0 − i 0 i 0 − i 0 ) J z = ℏ ( − 1 0 0 0 0 0 0 0 1 ) {\displaystyle J_{x}={\frac {\hbar }{\sqrt {2}}}{\begin{pmatrix}0&1&0\\1&0&1\\0&1&0\end{pmatrix}}\,\quad J_{y}={\frac {\hbar }{\sqrt {2}}}{\begin{pmatrix}0&i&0\\-i&0&i\\0&-i&0\end{pmatrix}}\,\quad J_{z}=\hbar {\begin{pmatrix}-1&0&0\\0&0&0\\0&0&1\end{pmatrix}}} and let R ^ = R ^ ( θ , n ^ ) {\displaystyle {\widehat {R}}={\widehat {R}}(\theta ,{\hat {\mathbf {n} }})} be a rotation matrix. According to the Rodrigues' rotation formula, the rotation operator then amounts to U [ R ( θ , n ^ ) ] = 1 1 − i sin ⁡ θ ℏ n ^ ⋅ J − 1 − cos ⁡ θ ℏ 2 ( n ^ ⋅ J ) 2 . {\displaystyle U[R(\theta ,{\hat {\mathbf {n} }})]=1\!\!1-{\frac {i\sin \theta }{\hbar }}{\hat {\mathbf {n} }}\cdot \mathbf {J} -{\frac {1-\cos \theta }{\hbar ^{2}}}({\hat {\mathbf {n} }}\cdot \mathbf {J} )^{2}.} An operator Ω ^ {\displaystyle {\widehat {\Omega }}} is invariant under a unitary transformation U if Ω ^ = U † Ω ^ U ; {\displaystyle {\widehat {\Omega }}={U}^{\dagger }{\widehat {\Omega }}U;} in this case for the rotation U ^ ( R ) {\displaystyle {\widehat {U}}(R)} , Ω ^ = U ( R ) † Ω ^ U ( R ) = exp ⁡ ( i θ ℏ n ^ ⋅ J ) Ω ^ exp ⁡ ( − i θ ℏ n ^ ⋅ J ) . {\displaystyle {\widehat {\Omega }}={U(R)}^{\dagger }{\widehat {\Omega }}U(R)=\exp \left({\frac {i\theta }{\hbar }}{\hat {\mathbf {n} }}\cdot \mathbf {J} \right){\widehat {\Omega }}\exp \left(-{\frac {i\theta }{\hbar }}{\hat {\mathbf {n} }}\cdot \mathbf {J} \right).} === Angular momentum eigenkets === The orthonormal basis set for total angular momentum is | j , m ⟩ {\displaystyle |j,m\rangle } , where j is the total angular momentum quantum number and m is the magnetic angular momentum quantum number, which takes values −j, −j + 1, ..., j − 1, j. A general state within the j subspace | ψ ⟩ = ∑ m c j m | j , m ⟩ {\displaystyle |\psi \rangle =\sum _{m}c_{jm}|j,m\rangle } rotates to a new state by: | ψ ¯ ⟩ = U ( R ) | ψ ⟩ = ∑ m c j m U ( R ) | j , m ⟩ {\displaystyle |{\bar {\psi }}\rangle =U(R)|\psi \rangle =\sum _{m}c_{jm}U(R)|j,m\rangle } Using the completeness condition: I = ∑ m ′ | j , m ′ ⟩ ⟨ j , m ′ | {\displaystyle I=\sum _{m'}|j,m'\rangle \langle j,m'|} we have | ψ ¯ ⟩ = I U ( R ) | ψ ⟩ = ∑ m m ′ c j m | j , m ′ ⟩ ⟨ j , m ′ | U ( R ) | j , m ⟩ {\displaystyle |{\bar {\psi }}\rangle =IU(R)|\psi \rangle =\sum _{mm'}c_{jm}|j,m'\rangle \langle j,m'|U(R)|j,m\rangle } Introducing the Wigner D matrix elements: D ( R ) m ′ m ( j ) = ⟨ j , m ′ | U ( R ) | j , m ⟩ {\displaystyle {D(R)}_{m'm}^{(j)}=\langle j,m'|U(R)|j,m\rangle } gives the matrix multiplication: | ψ ¯ ⟩ = ∑ m m ′ c j m D m ′ m ( j ) | j , m ′ ⟩ ⇒ | ψ ¯ ⟩ = D ( j ) | ψ ⟩ {\displaystyle |{\bar {\psi }}\rangle =\sum _{mm'}c_{jm}D_{m'm}^{(j)}|j,m'\rangle \quad \Rightarrow \quad |{\bar {\psi }}\rangle =D^{(j)}|\psi \rangle } For one basis ket: | j , m ¯ ⟩ = ∑ m ′ D ( R ) m ′ m ( j ) | j , m ′ ⟩ {\displaystyle |{\overline {j,m}}\rangle =\sum _{m'}{D(R)}_{m'm}^{(j)}|j,m'\rangle } For the case of orbital angular momentum, the eigenstates | ℓ , m ⟩ {\displaystyle |\ell ,m\rangle } of the orbital angular momentum operator L and solutions of Laplace's equation on a 3d sphere are spherical harmonics: Y ℓ m ( θ , ϕ ) = ⟨ θ , ϕ | ℓ , m ⟩ = ( 2 ℓ + 1 ) 4 π ( ℓ − m ) ! ( ℓ + m ) ! P ℓ m ( cos ⁡ θ ) e i m ϕ {\displaystyle Y_{\ell }^{m}(\theta ,\phi )=\langle \theta ,\phi |\ell ,m\rangle ={\sqrt {{(2\ell +1) \over 4\pi }{(\ell -m)! \over (\ell +m)!}}}\,P_{\ell }^{m}(\cos {\theta })\,e^{im\phi }} where Pℓm is an associated Legendre polynomial, ℓ is the orbital angular momentum quantum number, and m is the orbital magnetic quantum number which takes the values −ℓ, −ℓ + 1, ... ℓ − 1, ℓ The formalism of spherical harmonics have wide applications in applied mathematics, and are closely related to the formalism of spherical tensors, as shown below. Spherical harmonics are functions of the polar and azimuthal angles, ϕ and θ respectively, which can be conveniently collected into a unit vector n(θ, ϕ) pointing in the direction of those angles, in the Cartesian basis it is: n ^ ( θ , ϕ ) = cos ⁡ ϕ sin ⁡ θ e x + s
Read more →
International Philosophical Bibliography

The International Philosophical Bibliography (IPB), also known in French as Répertoire bibliographique de la philosophie (RBP), is a bibliographic database covering publications on the history of philosophy and continental philosophy. The database comprises records of publications in over 30 languages. Annually, about 12,000 records are added. The indexes include, among other elements, over 84,000 names of authors, editors, translators, reviewers, and collaborators, as well as more than 3,000 commentaries on philosophical works, making it the world's most complete index in Philosophy. Since 1934, the IPB has been developed by the Higher Institute of Philosophy at the University of Louvain (UCLouvain), first in Leuven and since 1978 in Louvain-la-Neuve. The online version was launched by Peeters Publishers in 1997 and continues to be updated quarterly.
Read more →
Magic state distillation

Magic state distillation is a method for creating more accurate quantum states from multiple noisy ones, which is important for building fault tolerant quantum computers. It has also been linked to quantum contextuality, a concept thought to contribute to quantum computers' power. The technique was first proposed by Emanuel Knill in 2004, and further analyzed by Sergey Bravyi and Alexei Kitaev the same year. Thanks to the Gottesman–Knill theorem, it is known that some quantum operations (operations in the Clifford group) can be perfectly simulated in polynomial time on a classical computer. In order to achieve universal quantum computation, a quantum computer must be able to perform operations outside this set. Magic state distillation achieves this, in principle, by concentrating the usefulness of imperfect resources, represented by mixed states, into states that are conducive for performing operations that are difficult to simulate classically. A variety of qubit magic state distillation routines and distillation routines for qubits with various advantages have been proposed. == Stabilizer formalism == The Clifford group consists of a set of n {\displaystyle n} -qubit operations generated by the gates {H, S, CNOT} (where H is Hadamard and S is [ 1 0 0 i ] {\displaystyle {\begin{bmatrix}1&0\\0&i\end{bmatrix}}} ) called Clifford gates. The Clifford group generates stabilizer states which can be efficiently simulated classically, as shown by the Gottesman–Knill theorem. This set of gates with a non-Clifford operation is universal for quantum computation. == Magic states == Magic states are purified from n {\displaystyle n} copies of a mixed state ρ {\displaystyle \rho } . These states are typically provided via an ancilla to the circuit. A magic state for the π / 6 {\displaystyle \pi /6} rotation operator is | M ⟩ = cos ⁡ ( β / 2 ) | 0 ⟩ + e i π 4 sin ⁡ ( β / 2 ) | 1 ⟩ {\displaystyle |M\rangle =\cos(\beta /2)|0\rangle +e^{i{\frac {\pi }{4}}}\sin(\beta /2)|1\rangle } where β = arccos ⁡ ( 1 3 ) {\displaystyle \beta =\arccos \left({\frac {1}{\sqrt {3}}}\right)} . A non-Clifford gate can be generated by combining (copies of) magic states with Clifford gates. Since a set of Clifford gates combined with a non-Clifford gate is universal for quantum computation, magic states combined with Clifford gates are also universal. == Purification algorithm for distilling |M〉 == The first magic state distillation algorithm, invented by Sergey Bravyi and Alexei Kitaev, is as follows. Input: Prepare 5 imperfect states. Output: An almost pure state having a small error probability. repeat Apply the decoding operation of the five-qubit error correcting code and measure the syndrome. If the measured syndrome is | 0000 ⟩ {\displaystyle |0000\rangle } , the distillation attempt is successful. else Get rid of the resulting state and restart the algorithm. until The states have been distilled to the desired purity.
Read more →