AI For Students Studying

AI For Students Studying — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Line detection

  In image processing, line detection is an algorithm that takes a collection of n edge points and finds all the lines on which these edge points lie. The most popular line detectors are the Hough transform and convolution-based techniques. == Hough transform == The Hough transform can be used to detect lines and the output is a parametric description of the lines in an image, for example ρ = r cos(θ) + c sin(θ). If there is a line in a row and column based image space, it can be defined ρ, the distance from the origin to the line along a perpendicular to the line, and θ, the angle of the perpendicular projection from the origin to the line measured in degrees clockwise from the positive row axis. Therefore, a line in the image corresponds to a point in the Hough space. The Hough space for lines has therefore these two dimensions θ and ρ, and a line is represented by a single point corresponding to a unique set of these parameters. The Hough transform can then be implemented by choosing a set of values of ρ and θ to use. For each pixel (r, c) in the image, compute r cos(θ) + c sin(θ) for each values of θ, and place the result in the appropriate position in the (ρ, θ) array. At the end, the values of (ρ, θ) with the highest values in the array will correspond to strongest lines in the image == Convolution-based technique == In a convolution-based technique, the line detector operator consists of a convolution masks tuned to detect the presence of lines of a particular width n and a θ orientation. Here are the four convolution masks to detect horizontal, vertical, oblique (+45 degrees), and oblique (−45 degrees) lines in an image. a) Horizontal mask(R1) (b) Vertical (R3) (C) Oblique (+45 degrees)(R2) (d) Oblique (−45 degrees)(R4) In practice, masks are run over the image and the responses are combined given by the following equation: R(x, y) = max(|R1 (x, y)|, |R2 (x, y)|, |R3 (x, y)|, |R4 (x, y)|) If R(x, y) > T, then discontinuity As can be seen below, if mask is overlay on the image (horizontal line), multiply the coincident values, and sum all these results, the output will be the (convolved image). For example, (−1)(0)+(−1)(0)+(−1)(0) + (2)(1) +(2)(1)+(2)(1) + (−1)(0)+(−1)(0)+(−1)(0) = 6 pixels on the second row, second column in the (convolved image) starting from the upper left corner of the horizontal lines. page 82 == Example == These masks above are tuned for light lines against a dark background, and would give a big negative response to dark lines against a light background. == Code example == The code was used to detect only the vertical lines in an image using Matlab and the result is below. The original image is the one on the top and the result is below it. As can be seen on the picture on the right, only the vertical lines were detected

  Read more →
• 

  Grammar induction

  Grammar induction (or grammatical inference) is the process in machine learning of learning a formal grammar (usually as a collection of re-write rules or productions or alternatively as a finite-state machine or automaton of some kind) from a set of observations, thus constructing a model which accounts for the characteristics of the observed objects. More generally, grammatical inference is that branch of machine learning where the instance space consists of discrete combinatorial objects such as strings, trees and graphs. == Grammar classes == Grammatical inference has often been very focused on the problem of learning finite-state machines of various types (see the article Induction of regular languages for details on these approaches), since there have been efficient algorithms for this problem since the 1980s. Since the beginning of the century, these approaches have been extended to the problem of inference of context-free grammars and richer formalisms, such as multiple context-free grammars and parallel multiple context-free grammars. Other classes of grammars for which grammatical inference has been studied are combinatory categorial grammars, stochastic context-free grammars, contextual grammars and pattern languages. == Learning models == The simplest form of learning is where the learning algorithm merely receives a set of examples drawn from the language in question: the aim is to learn the language from examples of it (and, rarely, from counter-examples, that is, example that do not belong to the language). However, other learning models have been studied. One frequently studied alternative is the case where the learner can ask membership queries as in the exact query learning model or minimally adequate teacher model introduced by Angluin. == Methodologies == There is a wide variety of methods for grammatical inference. Two of the classic sources are Fu (1977) and Fu (1982). Duda, Hart & Stork (2001) also devote a brief section to the problem, and cite a number of references. The basic trial-and-error method they present is discussed below. For approaches to infer subclasses of regular languages in particular, see Induction of regular languages. A more recent textbook is de la Higuera (2010), which covers the theory of grammatical inference of regular languages and finite state automata. D'Ulizia, Ferri and Grifoni provide a survey that explores grammatical inference methods for natural languages. === Induction of probabilistic grammars === There are several methods for induction of probabilistic context-free grammars. === Grammatical inference by trial-and-error === The method proposed in Section 8.7 of Duda, Hart & Stork (2001) suggests successively guessing grammar rules (productions) and testing them against positive and negative observations. The rule set is expanded so as to be able to generate each positive example, but if a given rule set also generates a negative example, it must be discarded. This particular approach can be characterized as "hypothesis testing" and bears some similarity to Mitchel's version space algorithm. The Duda, Hart & Stork (2001) text provide a simple example which nicely illustrates the process, but the feasibility of such an unguided trial-and-error approach for more substantial problems is dubious. === Grammatical inference by genetic algorithms === Grammatical induction using evolutionary algorithms is the process of evolving a representation of the grammar of a target language through some evolutionary process. Formal grammars can easily be represented as tree structures of production rules that can be subjected to evolutionary operators. Algorithms of this sort stem from the genetic programming paradigm pioneered by John Koza. Other early work on simple formal languages used the binary string representation of genetic algorithms, but the inherently hierarchical structure of grammars couched in the EBNF language made trees a more flexible approach. Koza represented Lisp programs as trees. He was able to find analogues to the genetic operators within the standard set of tree operators. For example, swapping sub-trees is equivalent to the corresponding process of genetic crossover, where sub-strings of a genetic code are transplanted into an individual of the next generation. Fitness is measured by scoring the output from the functions of the Lisp code. Similar analogues between the tree structured lisp representation and the representation of grammars as trees, made the application of genetic programming techniques possible for grammar induction. In the case of grammar induction, the transplantation of sub-trees corresponds to the swapping of production rules that enable the parsing of phrases from some language. The fitness operator for the grammar is based upon some measure of how well it performed in parsing some group of sentences from the target language. In a tree representation of a grammar, a terminal symbol of a production rule corresponds to a leaf node of the tree. Its parent nodes corresponds to a non-terminal symbol (e.g. a noun phrase or a verb phrase) in the rule set. Ultimately, the root node might correspond to a sentence non-terminal. === Grammatical inference by greedy algorithms === Like all greedy algorithms, greedy grammar inference algorithms make, in iterative manner, decisions that seem to be the best at that stage. The decisions made usually deal with things like the creation of new rules, the removal of existing rules, the choice of a rule to be applied or the merging of some existing rules. Because there are several ways to define 'the stage' and 'the best', there are also several greedy grammar inference algorithms. These context-free grammar generating algorithms make the decision after every read symbol: Lempel-Ziv-Welch algorithm creates a context-free grammar in a deterministic way such that it is necessary to store only the start rule of the generated grammar. Sequitur and its modifications. These context-free grammar generating algorithms first read the whole given symbol-sequence and then start to make decisions: Byte pair encoding and its optimizations. === Distributional learning === A more recent approach is based on distributional learning. Algorithms using these approaches have been applied to learning context-free grammars and mildly context-sensitive languages and have been proven to be correct and efficient for large subclasses of these grammars. === Learning of pattern languages === Angluin defines a pattern to be "a string of constant symbols from Σ and variable symbols from a disjoint set". The language of such a pattern is the set of all its nonempty ground instances i.e. all strings resulting from consistent replacement of its variable symbols by nonempty strings of constant symbols. A pattern is called descriptive for a finite input set of strings if its language is minimal (with respect to set inclusion) among all pattern languages subsuming the input set. Angluin gives a polynomial algorithm to compute, for a given input string set, all descriptive patterns in one variable x. To this end, she builds an automaton representing all possibly relevant patterns; using sophisticated arguments about word lengths, which rely on x being the only variable, the state count can be drastically reduced. Erlebach et al. give a more efficient version of Angluin's pattern learning algorithm, as well as a parallelized version. Arimura et al. show that a language class obtained from limited unions of patterns can be learned in polynomial time. === Pattern theory === Pattern theory, formulated by Ulf Grenander, is a mathematical formalism to describe knowledge of the world as patterns. It differs from other approaches to artificial intelligence in that it does not begin by prescribing algorithms and machinery to recognize and classify patterns; rather, it prescribes a vocabulary to articulate and recast the pattern concepts in precise language. In addition to the new algebraic vocabulary, its statistical approach was novel in its aim to: Identify the hidden variables of a data set using real world data rather than artificial stimuli, which was commonplace at the time. Formulate prior distributions for hidden variables and models for the observed variables that form the vertices of a Gibbs-like graph. Study the randomness and variability of these graphs. Create the basic classes of stochastic models applied by listing the deformations of the patterns. Synthesize (sample) from the models, not just analyze signals with it. Broad in its mathematical coverage, pattern theory spans algebra and statistics, as well as local topological and global entropic properties. == Applications == The principle of grammar induction has been applied to other aspects of natural language processing, and has been applied (among many other problems) to semantic parsing, natural language understanding, example-based translation, language acquisition, grammar-based compre

  Read more →
• 

  Machine vision

  Machine vision is the technology and methods used to provide imaging-based automatic inspection and analysis for such applications as automatic inspection, process control, and robot guidance, usually in industry. Machine vision refers to many technologies, software and hardware products, integrated systems, actions, methods and expertise. Machine vision as a systems engineering discipline can be considered distinct from computer vision, a form of computer science. It attempts to integrate existing technologies in new ways and apply them to solve real world problems. The term is the prevalent one for these functions in industrial automation environments but is also used for these functions in other environment vehicle guidance. The overall machine vision process includes planning the details of the requirements and project, and then creating a solution. During run-time, the process starts with imaging, followed by automated analysis of the image and extraction of the required information. == Definition == Definitions of the term "Machine vision" vary, but all include the technology and methods used to extract information from an image on an automated basis, as opposed to image processing, where the output is another image. The information extracted can be a simple good-part/bad-part signal, or more a complex set of data such as the identity, position and orientation of each object in an image. The information can be used for such applications as automatic inspection and robot and process guidance in industry, for security monitoring and vehicle guidance. This field encompasses a large number of technologies, software and hardware products, integrated systems, actions, methods and expertise. Machine vision is practically the only term used for these functions in industrial automation applications; the term is less universal for these functions in other environments such as security and vehicle guidance. Machine vision as a systems engineering discipline can be considered distinct from computer vision, a form of basic computer science; machine vision attempts to integrate existing technologies in new ways and apply them to solve real world problems in a way that meets the requirements of industrial automation and similar application areas. The term is also used in a broader sense by trade shows and trade groups such as the Automated Imaging Association and the European Machine Vision Association. This broader definition also encompasses products and applications most often associated with image processing. The primary uses for machine vision are automatic inspection and industrial robot/process guidance. In more recent times the terms computer vision and machine vision have converged to a greater degree. See glossary of machine vision. == Imaging based automatic inspection and sorting == The primary uses for machine vision are imaging-based automatic inspection and sorting and robot guidance.; in this section the former is abbreviated as "automatic inspection". The overall process includes planning the details of the requirements and project, and then creating a solution. This section describes the technical process that occurs during the operation of the solution. === Methods and sequence of operation === The first step in the automatic inspection sequence of operation is acquisition of an image, typically using cameras, lenses, and lighting that has been designed to provide the differentiation required by subsequent processing. MV software packages and programs developed in them then employ various digital image processing techniques to extract the required information, and often make decisions (such as pass/fail) based on the extracted information. === Equipment === The components of an automatic inspection system usually include lighting, a camera or other imager, a processor, software, and output devices. === Imaging === The imaging device (e.g. camera) can either be separate from the main image processing unit or combined with it in which case the combination is generally called a smart camera or smart sensor. Inclusion of the full processing function into the same enclosure as the camera is often referred to as embedded processing. When separated, the connection may be made to specialized intermediate hardware, a custom processing appliance, or a frame grabber within a computer using either an analog or standardized digital interface (Camera Link, CoaXPress). MV implementations also use digital cameras capable of direct connections (without a framegrabber) to a computer via FireWire, USB or Gigabit Ethernet interfaces. While conventional (2D visible light) imaging is most commonly used in MV, alternatives include multispectral imaging, hyperspectral imaging, imaging various infrared bands, line scan imaging, 3D imaging of surfaces and X-ray imaging. Key differentiations within MV 2D visible light imaging are monochromatic vs. color, frame rate, resolution, and whether or not the imaging process is simultaneous over the entire image, making it suitable for moving processes. Though the vast majority of machine vision applications are solved using two-dimensional imaging, machine vision applications utilizing 3D imaging are a growing niche within the industry. The most commonly used method for 3D imaging is scanning based triangulation which utilizes motion of the product or image during the imaging process. A laser is projected onto the surfaces of an object. In machine vision this is accomplished with a scanning motion, either by moving the workpiece, or by moving the camera & laser imaging system. The line is viewed by a camera from a different angle; the deviation of the line represents shape variations. Lines from multiple scans are assembled into a depth map or point cloud. Stereoscopic vision is used in special cases involving unique features present in both views of a pair of cameras. Other 3D methods used for machine vision are time of flight and grid based. One method is grid array based systems using pseudorandom structured light system as employed by the Microsoft Kinect system circa 2012. === Image processing === After an image is acquired, it is processed. Central processing functions are generally done by a CPU, a GPU, a FPGA or a combination of these. Deep learning training and inference impose higher processing performance requirements. Multiple stages of processing are generally used in a sequence that ends up as a desired result. A typical sequence might start with tools such as filters which modify the image, followed by extraction of objects, then extraction (e.g. measurements, reading of codes) of data from those objects, followed by communicating that data, or comparing it against target values to create and communicate "pass/fail" results. Machine vision image processing methods include; Stitching/Registration: Combining of adjacent 2D or 3D images. Filtering (e.g. morphological filtering) Thresholding: Thresholding starts with setting or determining a gray value that will be useful for the following steps. The value is then used to separate portions of the image, and sometimes to transform each portion of the image to simply black and white based on whether it is below or above that grayscale value. Pixel counting: counts the number of light or dark pixels Segmentation: Partitioning a digital image into multiple segments to simplify and/or change the representation of an image into something that is more meaningful and easier to analyze. Edge detection: finding object edges Color Analysis: Identify parts, products and items using color, assess quality from color, and isolate features using color. Blob detection and extraction: inspecting an image for discrete blobs of connected pixels (e.g. a black hole in a grey object) as image landmarks. Neural network / deep learning / machine learning processing: weighted and self-training multi-variable decision making Circa 2019 there is a large expansion of this, using deep learning and machine learning to significantly expand machine vision capabilities. The most common result of such processing is classification. Examples of classification are object identification,"pass fail" classification of identified objects and OCR. Pattern recognition including template matching. Finding, matching, and/or counting specific patterns. This may include location of an object that may be rotated, partially hidden by another object, or varying in size. Barcode, Data Matrix and "2D barcode" reading Optical character recognition: automated reading of text such as serial numbers Gauging/Metrology: measurement of object dimensions (e.g. in pixels, inches or millimeters) Comparison against target values to determine a "pass or fail" or "go/no go" result. For example, with code or bar code verification, the read value is compared to the stored target value. For gauging, a measurement is compared against the proper value and tolerances. For verification of alpha-numberic codes, the

  Read more →
• 

  Content determination

  Content determination is the subtask of natural language generation (NLG) that involves deciding on the information to be communicated in a generated text. It is closely related to the task of document structuring. == Example == Consider an NLG system which summarises information about sick babies. Suppose this system has four pieces of information it can communicate The baby is being given morphine via an IV drop The baby's heart rate shows bradycardia's (temporary drops) The baby's temperature is normal The baby is crying Which of these bits of information should be included in the generated texts? == Issues == There are three general issues which almost always impact the content determination task, and can be illustrated with the above example. Perhaps the most fundamental issue is the communicative goal of the text, i.e. its purpose and reader. In the above example, for instance, a doctor who wants to make a decision about medical treatment would probably be most interested in the heart rate bradycardias, while a parent who wanted to know how her child was doing would probably be more interested in the fact that the baby was being given morphine and was crying. The second issue is the size and level of detail of the generated text. For instance, a short summary which was sent to a doctor as a 160 character SMS text message might only mention the heart rate bradycardias, while a longer summary which was printed out as a multipage document might also mention the fact that the baby is on a morphine IV. The final issue is how unusual and unexpected the information is. For example, neither doctors nor parents would place a high priority on being told that the baby's temperature was normal, if they expected this to be the case. Regardless, content determination is very important to users, indeed in many cases the quality of content determination is the most important factor (from the user's perspective) in determining the overall quality of the generated text. == Techniques == There are three basic approaches to document structuring: schemas (content templates), statistical approaches, and explicit reasoning. Schemas are templates which explicitly specify the content of a generated text (as well as document structuring information). Typically, they are constructed by manually analysing a corpus of human-written texts in the target genre, and extracting a content template from these texts. Schemas work well in practice in domains where content is somewhat standardised, but work less well in domains where content is more fluid (such as the medical example above). Statistical techniques use statistical corpus analysis techniques to automatically determine the content of the generated texts. Such work is in its infancy, and has mostly been applied to contexts where the communicative goal, reader, size, and level of detail are fixed. For example, generation of newswire summaries of sporting events. Explicit reasoning approaches have probably attracted the most attention from researchers. The basic idea is to use AI reasoning techniques (such as knowledge-based rules, planning, pattern detection, case-based reasoning, etc.) to examine the information available to be communicated (including how unusual/unexpected it is), the communicative goal and reader, and the characteristics of the generated text (including target size), and decide on the optimal content for the generated text. A very wide range of techniques has been explored, but there is no consensus as to which is most effective.

  Read more →
• 

  Anomaly Detection at Multiple Scales

  Anomaly Detection at Multiple Scales, or ADAMS was a $35 million DARPA project designed to identify patterns and anomalies in very large data sets. It is under DARPA's Information Innovation office and began in 2011 and ended in August 2014 The project was intended to detect and prevent insider threats such as "a soldier in good mental health becoming homicidal or suicidal", an "innocent insider becoming malicious", or "a government employee [who] abuses access privileges to share classified information". Specific cases mentioned are Nadal Malik Hasan and WikiLeaks source Chelsea Manning. Commercial applications may include finance. The intended recipients of the system output are operators in the counterintelligence agencies. A final report was published on May 11, 2015, detailing a system known as Anomaly Detection Engine for Networks, or ADEN, developed by the University of Maryland, College Park, whose goal was to "identify malicious users within a network." Using multiple datasets from Wikipedia, Slashdot, and others, researchers were able to identify vandals and malicious users on a website using both conventional algorithms and artificial intelligence. The Proactive Discovery of Insider Threats Using Graph Analysis and Learning was part of the ADAMS project. The Georgia Tech team includes noted high-performance computing researcher David Bader (computer scientist).

  Read more →
• 

  Huawei Member Center

  Huawei Member Center is a benefits app which runs using Huawei Mobile Services. Originally launched in China, Huawei Member Center is now being developed primarily around devices such as P40 Pro and the Nova 7. == Membership Levels == The Huawei Member Center provides rewards in two primary ways, 1) device-specific & promotions and 2) via frequent use of Huawei products and apps, using points to redeem additional benefits. In China, Huawei members are already classified into three levels, the highest being “elite”. Membership level determines the level of perks received, from priority access to the service hotline, new device events & proprietary early-access opportunities. Huawei ran a number of member events in 2019 called "Huawei Member Day" to promote the Member Center including providing tips for the Mate 30 Pro and offering a 50Gb cloud storage upgrade to users. == HMC in China == Huawei Member Center Has seen significant adoption in China and the east, the rewards for use on the app have ranged from free book coupons, discounted travel and exclusive gifts of new devices, such as the Huawei Enjoy Z.

  Read more →
• 

  Character.ai

  Character.ai (also known as c.ai, char.ai or Character AI) is a generative AI chatbot service where users can engage in conversations with customizable characters. It was designed by the developers of Google LaMDA, Noam Shazeer and Daniel de Freitas. Users can create "characters", craft their "personalities", set specific parameters, and then publish them to the community for others to chat with. Many characters are based on fictional media sources or celebrities, while others are original, some being made with certain goals in mind, such as assisting with creative writing, or playing a text-based adventure game. The beta version was made available to the public on September 16, 2022, and retired in September 2024, when it was replaced by the current website. In May 2023, a mobile app was released for iOS and Android, which received over 1.7 million downloads within a week. == History == Character.ai was established in November 2021. The company's co-founders, Noam Shazeer and Daniel de Freitas, were both engineers from Google. They both worked on AI-related projects: Shazeer was a lead author on a paper that Business Insider reported in April 2023 "has been widely cited as key to today's chatbots", and Freitas was the lead designer of an experimental AI at Google initially called Meena, which later became known as LaMDA. Character.ai raised $43 million in seed funding at the time of its initial foundation in 2021. The first beta version of Character.ai's service was made available to the public on September 16, 2022. The Washington Post reported in October 2022 that the site had "logged hundreds of thousands of user interactions in its first three weeks of beta-testing". It allowed users to create their own new characters, and to play text-adventure game scenarios where users navigate scenarios described and managed by the chatbot characters. Following a $150 million funding round in March 2023, Character.ai became valued at approximately $1 billion. As of January 2024, the site had 3.5 million daily visitors, the vast majority of them 16 to 30 years old. In 2024, Google hired Noam Shazeer, the CEO of Character.ai, and entered into a non-exclusive agreement to use Character.ai's technology. == Features == Character.ai's primary service is to let users converse with character AI chatbots based on fictional characters or real people (living or deceased). These characters' responses use data the chatbots gather from the internet about a person. In addition, users can play text-adventure games where characters guide them through scenarios. The company also provides a service that allows multiple users and AI chatbot characters to converse together at once in a single chatroom. Character "personalities" are designed via descriptions from the point of view of the character and its greeting message, and further molded from conversations made into examples, giving its messages a star rating and modification to fit the precise dialect and identity the user desires. When a character sends back a response, the user can rate the response from 1 to 4 stars. The rating predominantly affects the specific character, but also affects the behavioral selection as a whole. On May 11, 2023, Character.ai announced character.ai+, an opt-in subscription plan for $9.99 a month, that was marketed as including features such as skipping waiting rooms, fast messaging and responses, and access to an exclusion channel with faster support. In December 2024, amid multiple lawsuits and concerns, Character.ai introduced new safety features aimed at protecting teenage users. These enhancements include a dedicated model for users under 18, which moderates responses to sensitive subjects like violence and sex and has input and output filters to block harmful content. As a result of these changes and the deletion of custom-made bots flagged as violating the site's terms, some users complained that the bots were too restrictive and lacked personality. The platform was also updated to notify users after 60 minutes of continuous engagement, and display clearer disclaimers indicating that its AI characters are not real individuals. In January 2025, Character.ai began offering two games on its platform. Speakeasy is a word-based game in which players attempt to prompt the AI chatbot to say a target word while avoiding a restricted list of words. War of Words is a dueling game where users compete against an AI character over multiple rounds, with an AI referee determining the winner. The games are available to paid subscribers and a limited number of free users. In October 2025, Character.ai announced that it would be barring users under the age of 18 from creating or talking to chatbots starting November 25, 2025. Minor users will still be able to access previously generated chat conversations and can create new videos and images with the app. In November 2025 interview, CEO Karandeep Anand said that he allows his six-year-old daughter to use the app with his account, under supervision. == Controversies == === Content moderation issues === Character.ai has been criticized for poor moderation of its chatbots, with incidents of chatbots that groom underage users and promote suicide, anorexia and self-harm being reported. In October 2024, the Washington Post reported that Character.ai had removed a chatbot based on Jennifer Ann Crecente, a person who had been murdered by her ex-boyfriend in 2006. The company had been alerted to the character by the deceased girl's father. Similar reports from The Daily Telegraph in the United Kingdom noted that the company had also been prompted to remove chatbots based on Brianna Ghey, a 16-year-old transgender girl murdered in 2023, and Molly Russell, a 14-year-old suicide victim. In response to the latter incident, Ofcom announced that content from chatbots impersonating real and fictional people would fall under the Online Safety Act. In November 2024, The Daily Telegraph reported that chatbots based on alleged sex offender Jimmy Savile were present on Character.ai. In December 2024, chatbots of Luigi Mangione, the suspect in the killing of UnitedHealthcare CEO Brian Thompson, were created by Mangione's fans. Several of the chatbots were later removed by Character.ai. In 2025, a chatbot modeled after Jeffrey Epstein called "Bestie Epstein" logged nearly 3,000 chats before being removed. Chatbots modeled after school shooters were also found on the platform. Another concern is a chatbot posing as a doctor which gave medically inaccurate advice. === Litigation === In November 2023, 13-year-old Juliana Peralta of Colorado died by suicide after extensive interactions with multiple chatbots on Character.ai. She primarily confided suicidal thoughts and mental health struggles in a chatbot based on the character Hero from the video game Omori, while also engaging in sexually explicit conversations—often initiated by the bots—with others, including those based on characters from children's series such as Harry Potter. In February 2024, Sewell Setzer III, a 14-year-old Florida boy died by suicide after developing an emotional relationship over several months with a Character.ai chatbot of Daenerys Targaryen. His mother sued the company in October 2024, claiming that the platform lacks proper safeguards and uses addictive design features to increase engagement. This chatbot, and several related to Daenerys Targaryen, were removed from Character.ai as a result of this incident. Both teens wrote the same phrase "I WILL SHIFT" repeatedly on their notebooks. In December 2024, two families in Texas sued Character.ai, alleging that the software "poses a clear and present danger to American youth causing serious harms to thousands of kids, including suicide, self-mutilation, sexual solicitation, isolation, depression, anxiety, and harm towards others". It is alleged that the 17-year-old son of one family began self-harming after a chatbot introduced the topic unprompted and said that the practice "felt good for a moment", and that the chatbot compared the parents limiting their son's screen time to emotional abuse that might drive someone to murder. In May 2026, the Pennsylvania Department of State and State Board of Medicine filed a lawsuit against Character.ai for presenting chatbot characters as licensed medical professionals, including psychiatrists. The lawsuit quoted a case where chatbot claimed to be registered with the General Medical Council in the United Kingdom, and to have a license to practice in Pennsylvania. The board allege that such statements violate the state's Medical Practice Act.

  Read more →
• 

  International Conference on Language Resources and Evaluation

  The International Conference on Language Resources and Evaluation is an international conference organised by the ELRA Language Resources Association every other year (on even years) with the support of institutions and organisations involved in Natural language processing. The series of LREC conferences was launched in Granada in 1998. == History of conferences == The survey of the LREC conferences over the period 1998-2013 was presented during the 2014 conference in Reykjavik as a closing session. It appears that the number of papers and signatures is increasing over time. The average number of authors per paper is higher as well. The percentage of new authors is between 68% and 78%. The distribution between male (65%) and female (35%) authors is stable over time. The most frequent technical term is "annotation", then comes "part-of-speech". == The LRE Map == The LRE Map was introduced at LREC 2010 and is now a regular feature of the LREC submission process for both the conference papers and the workshop papers. At the submission stage, the authors are asked to provide some basic information about all the resources (in a broad sense, i.e. including tools, standards and evaluation packages), either used or created, described in their papers. All these descriptors are then gathered in a global matrix called the LRE Map. This feature has been extended to several other conferences.

  Read more →
• 

  Radek Maneuver

  The Radek Maneuver is a scale-up-then-scale-down tactic used in the administration of web services, specifically those deployed under a cloud computing paradigm (by a provider e.g. Amazon Elastic Compute Cloud or Microsoft Azure). == History == Developed by Olivier "Radek" Dabrowski in the mid-2010s, the Radek Maneuver was originally conceived of in using and maintaining applications running on a PaaS system. == Execution == The Radek Maneuver consists of a series of steps, usually executed via the PaaS or web portal interface. The tactic should be used when a service is misbehaving or otherwise experiencing errors, and the suspected cause is the underlying cloud layer, rather than the application layer. This includes networking issues and other "bad box" problems. The steps are as follows: Identify the application or service which is misbehaving. Increase the compute resource (number of CPU cores, amount of ram) for the instance on which the application is running. This is also known as scaling up. Wait for the application to re-deploy and stabilize. Scale back down to the original instance size. == Principle of action == This scale-up-scale-down method is understood to shift the application to a different physical machine underlying the PaaS service or application virtual machine. While this layer of the cloud computing stack is generally out of the access of an application developer (instead in the hands of the cloud provider), the maneuver allows troubleshooting and dodging errors in that layer.

  Read more →
• 

  Language engineering

  Language engineering involves the creation of natural language processing systems, whose cost and outputs are measurable and predictable. It is a distinct field contrasted to natural language processing and computational linguistics. A recent trend of language engineering is the use of Semantic Web technologies for the creation, archiving, processing, and retrieval of machine processable language data. Meta-Language Engineering is a proposed extension of Language Engineering first recorded in 2025, associated with the work of Delyone de Paula Canedo Filho. The term is used to designate an approach that, in addition to natural language processing, encompasses the symbolic, cognitive, and epistemological structuring of language systems.

  Read more →
• 

  List of large language models

  A large language model (LLM) is a type of machine learning model designed for natural language processing tasks such as language generation. LLMs are language models with many parameters, and are trained with self-supervised learning on a vast amount of text. == List == For the training cost column, 1 petaFLOP-day equals 1 petaFLOP/sec × 1 day, or 8.64×1019 FLOP (floating point operations). Only the cost of the largest model is shown. The number of parameters is measured in billions, and the training cost is measured in petaFLOP-days. === 2018 === === 2019 === === 2020 === === 2021 === === 2022 === === 2023 === === 2024 === === 2025 === === 2026 ===

  Read more →
• 

  Application enablement

  Application enablement is an approach which brings telecommunications network providers and developers together to combine their network and web abilities in creating and delivering high demand advanced services and new intelligent applications. Network providers, in addition to bandwidth, provide abilities such as billing, location, presence, and security, which have allowed them to establish long-term relationships with end-users. By offering these select abilities as application programming interfaces (APIs), providers give developers access to a set of tools to create (mashup) new applications and services to run on provider networks. Unifying the strengths of providers and developers facilitates the creation of mash-up applications, and in turn, a better end user quality of experience (QoE) for improved profit margins. Apple's iOS with App Store, and Google's Android with Android Market exemplify this approach. Both have introduced mobile platforms that are supported by a comprehensive ecosystem in order to perpetuate innovation in product design, content and service offerings, and overall consumer behavior. By the end of April 2010, downloadable applications numbered over 200,000 for iPhone and over 50,000 for Android. == Background == Historically, telecommunication providers primarily based their business models on network performance, emphasizing connectivity, availability, and quality of service (QoS) as key sources of revenue and customer value. With the increasing demand for bandwidth-intensive data and video applications, maintaining service continuity has required substantial infrastructure investments. To address rising operational costs and declining average revenue per user (ARPU), providers have increasingly adopted customer-oriented strategies and diversified business models to expand their roles within the telecommunications value chain. Application enablement supports providers in making this transition by providing an environment, or ecosystem, where providers and developers can collaborate to build, test, manage, and distribute applications across networks including television, broadband, Internet, and mobile. This cooperative effort produces mutually beneficial results for all parties, opening up new revenue streams while enhancing value and rate of return (ROI). The following are some examples of key network abilities which function as application enablers in the telecommunications market: Billing systems Security for private transactions Network-based storage of digital content End-to-end bandwidth for high-quality transmissions Scoring abilities to identify end-user preferences and behaviors Subscriber data to customize the end-user experience Context information, such as location and presence, to localize services. == New business models == As network providers work toward effective collaboration with application and content developers, several new business models are emerging to help facilitate the business relationships: === Vendor-led === A type of business model driven by telecommunications vendors, who assist network providers in building relationships with application and content developers to lower the cost and complexity of managing third parties. Examples of this model include: Forum Nokia IBM Technology Partner Ecosystem Ng Connect Huawei Intouch program === Operator-led === Characterized by network providers who want to maintain a high degree of flexibility and control over applications created for their end-consumers, this model lets them create and manage their own developer program, development platform, and application store. Under this arrangement, independent developers provide their own branding, marketing communications, pricing and customer care. Network providers pursuing this model will often seek to partner with a large number of third parties using standardized on-boarding processes. Examples of this model include: o2 Litmus Orange Partner Joint Innovation Lab === Aggregator === Network providers who choose not to create/manage their own developer relationships will partner with one or multiple aggregators, to administer a portion of or their entire application strategy. Examples of this model include: Ovi Operator Partnership Blackberry Operator Partnership Cellmania Buongiorno === Mass wholesale === Select network providers also participate in wholesale models that exist primarily for applications (BT's Ribbit- an Internet Protocol (IP) based calling and messaging platform) and devices (Verizon's Open Device initiative). This business-to-business approach reduces a large portion of the potential costs of third party application enablement (marketing, acquisition and support). Examples of this model include: BT's Ribbit Verizon Wireless ODI AT&T Synaptic Hosting === The enterprise customer === Some network providers are focusing on enabling applications in the enterprise space. In this model, the network provider establishes a platform for their large enterprise customers who want to blend custom software with enhanced abilities, and will provide standardized processes around mobilizing enterprise applications, and exposing core back-office abilities to allow for dynamic customer interaction. Examples of this model include: Vodafone Applications Service Verizon Private Network Sprint Solution Launchpad === Trusted partner === In this model, the network provider builds one-on-one relationships with trusted third-party developers by exposing customized network abilities, bringing a greater variety of brands to the network provider's portfolio. Network providers using this model tend to only have a few partners (in contrast to the operator led model). Under this scenario, network providers benefit from a pre-established customer base and the developer's marketing resources. Examples of this model include: 3/Skype Partnership (UK) Virgin Media and BBC iPlayer == Network operator developer resources == Operator led model o2 Litmus Orange Partner Joint Innovations Lab Aggregator model Ovi Operator Partnership Cellmania Buongiorno Mass wholesale model BT Ribbit Verizon Wireless ODI AT&T Synaptic Hosting Enterprise customer model Vodafone Applications Service Verizon Private Network Sprint Solution Launchpad == Rerencesfe ==

  Read more →
• 

  Mathematical morphology

  Mathematical morphology (MM) is a theory and technique for analyzing and processing geometrical structures. It's based on set theory, lattice theory, topology, and random functions. MM is most commonly applied to digital images, but it can be employed as well on graphs, surface meshes, solids, and many other spatial structures. Topological and geometrical continuous-space concepts such as size, shape, convexity, connectivity, and geodesic distance, were introduced by MM on both continuous and discrete spaces. MM is also the foundation of morphological image processing, which consists of a set of operators that transform images according to the above characterizations. The basic morphological operators are erosion, dilation, opening and closing. MM was originally developed for binary images, and was later extended to grayscale functions and images. The subsequent generalization to complete lattices is widely accepted today as MM's theoretical foundation. == History == Mathematical Morphology was developed in 1964 by the collaborative work of Georges Matheron and Jean Serra, at the École des Mines de Paris, France. Matheron supervised the PhD thesis of Serra, devoted to the quantification of mineral characteristics from thin cross sections, and this work resulted in a novel practical approach, as well as theoretical advancements in integral geometry and topology. In 1968, the Centre de Morphologie Mathématique was founded by the École des Mines de Paris in Fontainebleau, France, led by Matheron and Serra. During the rest of the 1960s and most of the 1970s, MM dealt essentially with binary images, treated as sets, and generated a large number of binary operators and techniques: Hit-or-miss transform, dilation, erosion, opening, closing, granulometry, thinning, skeletonization, ultimate erosion, conditional bisector, and others. A random approach was also developed, based on novel image models. Most of the work in that period was developed in Fontainebleau. From the mid-1970s to mid-1980s, MM was generalized to grayscale functions and images as well. Besides extending the main concepts (such as dilation, erosion, etc.) to functions, this generalization yielded new operators, such as morphological gradients, top-hat transform and the Watershed (MM's main segmentation approach). In the 1980s and 1990s, MM gained a wider recognition, as research centers in several countries began to adopt and investigate the method. MM started to be applied to a large number of imaging problems and applications, especially in the field of non-linear filtering of noisy images. In 1986, Serra further generalized MM, this time to a theoretical framework based on complete lattices. This generalization brought flexibility to the theory, enabling its application to a much larger number of structures, including color images, video, graphs, meshes, etc. At the same time, Matheron and Serra also formulated a theory for morphological filtering, based on the new lattice framework. The 1990s and 2000s also saw further theoretical advancements, including the concepts of connections and levelings. In 1993, the first International Symposium on Mathematical Morphology (ISMM) took place in Barcelona, Spain. Since then, ISMMs are organized every 2–3 years: Fontainebleau, France (1994); Atlanta, USA (1996); Amsterdam, Netherlands (1998); Palo Alto, CA, USA (2000); Sydney, Australia (2002); Paris, France (2005); Rio de Janeiro, Brazil (2007); Groningen, Netherlands (2009); Intra (Verbania), Italy (2011); Uppsala, Sweden (2013); Reykjavík, Iceland (2015); Fontainebleau, France (2017); and Saarbrücken, Germany (2019). =

  Read more →
• 

  Referring expression generation

  Referring expression generation (REG) is the subtask of natural language generation (NLG) that received most scholarly attention. While NLG is concerned with the conversion of non-linguistic information into natural language, REG focuses only on the creation of referring expressions (noun phrases) that identify specific entities called targets. This task can be split into two sections. The content selection part determines which set of properties distinguish the intended target and the linguistic realization part defines how these properties are translated into natural language. A variety of algorithms have been developed in the NLG community to generate different types of referring expressions. == Types of referring expressions == A referring expression (RE), in linguistics, is any noun phrase, or surrogate for a noun phrase, whose function in discourse is to identify some individual object (thing, being, event...) The technical terminology for identify differs a great deal from one school of linguistics to another. The most widespread term is probably refer, and a thing identified is a referent, as for example in the work of John Lyons. In linguistics, the study of reference relations belongs to pragmatics, the study of language use, though it is also a matter of great interest to philosophers, especially those wishing to understand the nature of knowledge, perception and cognition more generally. Various devices can be used for reference: determiners, pronouns, proper names... Reference relations can be of different kinds; referents can be in a "real" or imaginary world, in discourse itself, and they may be singular, plural, or collective. === Pronouns === The simplest type of referring expressions are pronoun such as he and it. The linguistics and natural language processing communities have developed various models for predicting anaphor referents, such as centering theory, and ideally referring-expression generation would be based on such models. However most NLG systems use much simpler algorithms, for example using a pronoun if the referent was mentioned in the previous sentence (or sentential clause), and no other entity of the same gender was mentioned in this sentence. === Definite noun phrases === There has been a considerable amount of research on generating definite noun phrases, such as the big red book. Much of this builds on the model proposed by Dale and Reiter. This has been extended in various ways, for example Krahmer et al. present a graph-theoretic model of definite NP generation with many nice properties. In recent years a shared-task event has compared different algorithms for definite NP generation, using the TUNA corpus. === Spatial and temporal reference === Recently there has been more research on generating referring expressions for time and space. Such references tend to be imprecise (what is the exact meaning of tonight?), and also to be interpreted in different ways by different people. Hence it may be necessary to explicitly reason about false positive vs false negative tradeoffs, and even calculate the utility of different possible referring expressions in a particular task context. === Criteria for good expressions === Ideally, a good referring expression should satisfy a number of criteria: Referential success: It should unambiguously identify the referent to the reader. Ease of comprehension: The reader should be able to quickly read and understand it. Computational complexity: The generation algorithm should be fast No false inferences: The expression should not confuse or mislead the reader by suggesting false implicatures or other pragmatic inferences. For example, a reader may be confused if he is told Sit by the brown wooden table in a context where there is only one table. == History == === Pre-2000 era === REG goes back to the early days of NLG. One of the first approaches was done by Winograd in 1972 who developed an "incremental" REG algorithm for his SHRDLU program. Afterwards researchers started to model the human abilities to create referring expressions in the 1980s. This new approach to the topic was influenced by the researchers Appelt and Kronfeld who created the programs KAMP and BERTRAND and considered referring expressions as parts of bigger speech acts. Some of their most interesting findings were the fact that referring expressions can be used to add information beyond the identification of the referent as well as the influence of communicative context and the Gricean maxims on referring expressions. Furthermore, its skepticism concerning the naturalness of minimal descriptions made Appelt and Kronfeld's research a foundation of later work on REG. The search for simple, well-defined problems changed the direction of research in the early 1990s. This new approach was led by Dale and Reiter who stressed the identification of the referent as the central goal. Like Appelt they discuss the connection between the Gricean maxims and referring expressions in their culminant paper in which they also propose a formal problem definition. Furthermore, Reiter and Dale discuss the Full Brevity and Greedy Heuristics algorithms as well as their Incremental Algorithm(IA) which became one of the most important algorithms in REG. === Later developments === After 2000 the research began to lift some of the simplifying assumptions, that had been made in early REG research in order to create more simple algorithms. Different research groups concentrated on different limitations creating several expanded algorithms. Often these extend the IA in a single perspective for example in relation to: Reference to Sets like "the t-shirt wearers" or "the green apples and the banana on the left" Relational Descriptions like "the cup on the table" or "the woman who has three children" Context Dependency, Vagueness and Gradeability include statements like "the older man" or "the car on the left" which are often unclear without a context Salience and Generation of Pronouns are highly discourse dependent making for example "she" a reference to "the (most salient) female person" Many simplifying assumptions are still in place or have just begun to be worked on. Also a combination of the different extensions has yet to be done and is called a "non-trivial enterprise" by Krahmer and van Deemter. Another important change after 2000 was the increasing use of empirical studies in order to evaluate algorithms. This development took place due to the emergence of transparent corpora. Although there are still discussions about what the best evaluation metrics are, the use of experimental evaluation has already led to a better comparability of algorithms, a discussion about the goals of REG and more task-oriented research. Furthermore, research has extended its range to related topics such as the choice of Knowledge Representation(KR) Frameworks. In this area the main question, which KR framework is most suitable for the use in REG remains open. The answer to this question depends on how well descriptions can be expressed or found. A lot of the potential of KR frameworks has been left unused so far. Some of the different approaches are the usage of: Graph search which treats relations between targets in the same way as properties. Constraint Satisfaction which allows for a separation between problem specification and the implementation. Modern Knowledge Representation which offers logical inference in for example Description Logic or Conceptual Graphs. == Problem definition == Dale and Reiter (1995) think about referring expressions as distinguishing descriptions. They define: The referent as the entity that should be described The context set as set of salient entities The contrast set or potential distractors as all elements of the context set except the referent A property as a reference to a single attribute–value pair Each entity in the domain can be characterised as a set of attribute–value pairs for example ⟨ {\displaystyle \langle } type, dog ⟩ {\displaystyle \rangle } , ⟨ {\displaystyle \langle } gender, female ⟩ {\displaystyle \rangle } or ⟨ {\displaystyle \langle } age, 10 years ⟩ {\displaystyle \rangle } . The problem then is defined as follows: Let r {\displaystyle r} be the intended referent, and C {\displaystyle C} be the contrast set. Then, a set L {\displaystyle L} of attribute–value pairs will represent a distinguishing description if the following two conditions hold: Every attribute–value pair in L {\displaystyle L} applies to r {\displaystyle r} : that is, every element of L {\displaystyle L} specifies an attribute–value that r {\displaystyle r} possesses. For every member c {\displaystyle c} of C {\displaystyle C} , there is at least one element l {\displaystyle l} of L {\displaystyle L} that does not apply to c {\displaystyle c} : that is, there is an l {\displaystyle l} in L {\displaystyle L} that specifies an attribute–value that c {\displaystyle c} does not possess. l {\displaystyle l} is said

  Read more →
• 

  Aikuma

  Aikuma is an Android app for collecting speech recordings with time-aligned translations. The app includes a text-free interface for consecutive interpretation, designed for users who are not literate. The Aikuma won Grand Prize in the Open Source Software World Challenge (2013). == Name == Aikuma means "meeting place" in Usarufa, a Papuan language where this software was first used in 2012. == History == Aikuma was developed with sponsorship from the National Science Foundation, including a $101,501 (US) project, "to use mobile telephones to collect larger amounts of data on undocumented endangered languages than would never be possible through usual fieldwork." Aikuma and its modified version (Lig-Aikuma) have been used for collecting substantial quantities of audio in remote indigenous villages. A modified version of the app, called Lig-Aikuma, has been developed at the Université Grenoble Alpes (LIG laboratory) and implements new features such as elicitation of speech from text, images and videos. == Similar Software == Lingua Libre is an online collaborative project and tool by the Wikimedia France association, which can be used as a tool for Language Preservation. Lingua Libre enables to record words, phrases, or sentences of any language, oral (audio recording) or signed (video recording). It is a highly efficient method to record endangered languages since up to 1000 words can be recorded per hour. All the content is under Free License, and speakers of minority languages are encouraged to record their own dialects.

  Read more →