AI For Work Kore

AI For Work Kore — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Texture atlas

In computer graphics, a texture atlas (also called a spritesheet or an image sprite in 2D game development) is an image containing multiple smaller images, usually packed together to reduce overall dimensions. An atlas can consist of uniformly-sized images or images of varying dimensions. A sub-image is drawn using custom texture coordinates to pick it out of the atlas. == Benefits == In an application where many small textures are used frequently, it is often more efficient to store the textures in a texture atlas which is treated as a single unit by the graphics hardware. This reduces both the disk I/O overhead and the overhead of a context switch by increasing memory locality. Careful alignment may be needed to avoid bleeding between sub textures when used with mipmapping and texture compression. In web development, images are packed into a sprite sheet to reduce the number of image resources that need to be fetched in order to display a page. == Gallery ==
Read more →
Conceptions of Library and Information Science

Conceptions of Library and Information Science (CoLIS) is a series of conferences about historical, empirical and theoretical perspectives in Library and Information Science. == CoLIS conferences == CoLIS 1 1991 in Tampere, Finland CoLIS 2 1996 in Copenhagen, Denmark CoLIS 3 1999 in Dubrovnik, Croatia CoLIS 4 2002 in Seattle, US CoLIS 5 2005 in Glasgow, Scotland CoLIS 6 2007 in Borås, Sweden CoLIS 7 June 2010 in London, at City University London. CoLIS 8 August 19–22, 2013, in Copenhagen, Denmark, at The Royal School of Library and Information Science. CoLIS 9 June 27–29, 2016, in Uppsala, Sweden, at Uppsala University. CoLIS 10 June 16–19, 2019, in Ljubljana, Slovenia, Faculty of Arts CoLIS 11 May 29–June 1, 2022, in Oslo, Norway, Oslo Metropolitan University.
Read more →
SQL/PSM

SQL/PSM (SQL/Persistent Stored Modules) is an ISO standard mainly defining an extension of SQL with a procedural language for use in stored procedures. Initially published in 1996 as an extension of SQL-92 (ISO/IEC 9075-4:1996, a version sometimes called PSM-96 or even SQL-92/PSM), SQL/PSM was later incorporated into the multi-part SQL:1999 standard, and has been part 4 of that standard since then, most recently in SQL:2023. The SQL:1999 part 4 covered less than the original PSM-96 because the SQL statements for defining, managing, and invoking routines were actually incorporated into part 2 SQL/Foundation, leaving only the procedural language itself as SQL/PSM. The SQL/PSM facilities are still optional as far as the SQL standard is concerned; most of them are grouped in Features P001-P008. SQL/PSM standardizes syntax and semantics for control flow, exception handling (called "condition handling" in SQL/PSM), local variables, assignment of expressions to variables and parameters, and (procedural) use of cursors. It also defines an information schema (metadata) for stored procedures. SQL/PSM is one language in which methods for the SQL:1999 structured types can be defined. The other is Java, via SQL/JRT. SQL/PSM is derived, seemingly directly, from Oracle's PL/SQL. Oracle developed PL/SQL and released it in 1991, basing the language on the US Department of Defense's Ada programming language. However, Oracle has maintained a distance from the standard in its documentation. IBM's SQL PL (used in DB2) and Mimer SQL's PSM were the first two products officially implementing SQL/PSM. It is commonly thought that these two languages, and perhaps also MySQL/MariaDB's procedural language, are closest to the SQL/PSM standard. However, a PostgreSQL addon implements SQL/PSM (alongside its other procedural languages like the PL/SQL-derived plpgsql), although it is not part of the core product. RDF functionality in OpenLink Virtuoso was developed entirely through SQL/PSM, combined with custom datatypes (e.g., ANY for handling URI and Literal relation objects), sophisticated indexing, and flexible physical storage choices (column-wise or row-wise).
Read more →
OpenSMILE

openSMILE is source-available software for automatic extraction of features from audio signals and for classification of speech and music signals. "SMILE" stands for "Speech & Music Interpretation by Large-space Extraction". The software is mainly applied in the area of automatic emotion recognition and is widely used in the affective computing research community. The openSMILE project exists since 2008 and is maintained by the German company audEERING GmbH since 2013. openSMILE is provided free of charge for research purposes and personal use under a source-available license. For commercial use of the tool, the company audEERING offers custom license options. == Application Areas == openSMILE is used for academic research as well as for commercial applications in order to automatically analyze speech and music signals in real-time. In contrast to automatic speech recognition which extracts the spoken content out of a speech signal, openSMILE is capable of recognizing the characteristics of a given speech or music segment. Examples for such characteristics encoded in human speech are a speaker's emotion, age, gender, and personality, as well as speaker states like depression, intoxication, or vocal pathological disorders. The software further includes music classification technology for automatic music mood detection and recognition of chorus segments, key, chords, tempo, meter, dance-style, and genre. The openSMILE toolkit serves as benchmark in manifold research competitions such as Interspeech ComParE, AVEC, MediaEval, and EmotiW. == History == The openSMILE project was started in 2008 by Florian Eyben, Martin Wöllmer, and Björn Schuller at the Technical University of Munich within the European Union research project SEMAINE. The goal of the SEMAINE project was to develop a virtual agent with emotional and social intelligence. In this system, openSMILE was applied for real-time analysis of speech and emotion. The final SEMAINE software release is based on openSMILE version 1.0.1. In 2009, the emotion recognition toolkit (openEAR) was published based on openSMILE. "EAR" stands for "Emotion and Affect Recognition". In 2010, openSMILE version 1.0.1 was published and was introduced and awarded at the ACM Multimedia Open-Source Software Challenge. Between 2011 and 2013, the technology of openSMILE was extended and improved by Florian Eyben and Felix Weninger in the context of their doctoral thesis at the Technical University of Munich. The software was also applied for the project ASC-Inclusion, which was funded by the European Union. For this project, the software was extended by Erik Marchi in order to teach emotional expression to autistic children, based on automatic emotion recognition and visualization. In 2013, the company audEERING acquired the rights to the code-base from the Technical University of Munich and version 2.0 was published under a source-available research license. Until 2016, openSMILE was downloaded more than 50,000 times worldwide and has established itself as a standard toolkit for emotion recognition. == Awards == openSMILE was awarded in 2010 in the context of the ACM Multimedia Open Source Competition. The software tool is applied in numerous scientific publications on automatic emotion recognition. openSMILE and its extension openEAR have been cited in more than 1000 scientific publications until today.
Read more →
List of monochrome and RGB color formats

This list of monochrome and RGB palettes includes generic repertoires of colors (color palettes) to produce black-and-white and RGB color pictures by a computer's display hardware. RGB is the most common method to produce colors for displays; so these complete RGB color repertoires have every possible combination of R-G-B triplets within any given maximum number of levels per component. Each palette is represented by a series of color patches. When the number of colors is low, a 1-pixel-size version of the palette appears below it, for easily comparing relative palette sizes. Huge palettes are given directly in one-color-per-pixel color patches. For each unique palette, an image color test chart and sample image (truecolor original follows) rendered with that palette (without dithering) are given. The test chart shows the full 256 levels of the red, green, and blue (RGB) primary colors and cyan, magenta, and yellow complementary colors, along with a full 256-level grayscale. Gradients of RGB intermediate colors (orange, lime green, sea green, sky blue, violet, and fuchsia), and a full hue spectrum are also present. Color charts are not gamma corrected. These elements illustrate the color depth and distribution of the colors of any given palette, and the sample image indicates how the color selection of such palettes could represent real-life images. These images are not necessarily representative of how the image would be displayed on the original graphics hardware, as the hardware may have additional limitations regarding the maximum display resolution, pixel aspect ratio and color placement. Implementation of these formats is specific to each machine. Therefore, the number of colors that can be simultaneously displayed in a given text or graphic mode might be different. Also, the actual displayed colors are subject to the output format used - PAL or NTSC, composite or component video, etc. - and might be slightly different. For simulated images and specific hardware and alternate methods to produce colors other than RGB (ex: composite), see the List of 8-bit computer hardware palettes, the List of 16-bit computer hardware palettes and the List of video game console palettes. For various software arrangements and sorts of colors, including other possible full RGB arrangements within 8-bit color depth displays, see the List of software palettes. == Monochrome palettes == These palettes only have some shades of gray, from black to white (considered the darkest and lightest "grays", respectively). The general rule is that those palettes have 2n different shades of gray, where n is the number of bits needed to represent a single pixel. === Monochrome (1-bit grayscale) === Monochrome graphics displays typically have a black background with a white or light gray image, though green and amber monochrome monitors were also common. Such a palette requires only one bit per pixel. Where photo-realism was desired, these early computer systems had a heavy reliance on dithering to make up for the limits of the technology. In some systems, as Hercules and CGA graphic cards for the IBM PC, a bit value of 1 represents white pixels (light on) and a value of 0 the black ones (light off); others, like the Playdate and Atari ST and Apple Macintosh with monochrome monitors, a bit value of 0 means a white pixel (no ink) and a value of 1 means a black pixel (dot of ink), which it approximates to the printing logic. === 2-bit Grayscale === In a 2-bit color palette each pixel's value is represented by 2 bits resulting in a 4-value palette (22 = 4). 2-bit dithering: It has black, white and two intermediate levels of gray as follows: A monochrome 2-bit palette is used on: The Monochrome Display Adapter for the IBM PC NeXT Computer, NeXTcube and NeXTstation monochrome graphic displays. Original Game Boy system portable video game console. Macintosh PowerBook 150 monochrome LC displays. Amiga with A2024 monochrome monitor in high-resolution mode. The original Amazon Kindle The original WonderSwan The Tiger Electronics Game.com portable video game console The original Neo Geo Pocket. === 4-bit Grayscale === In a 4-bit color palette each pixel's value is represented by 4 bits resulting in a 16-value palette (24 = 16): 4-bit grayscale dithering does a fairly good job of reducing visible banding of the level changes: A monochrome 4-bit palette is used on: MOS Technology VDC (on the Commodore 128 with monochrome monitor) Amstrad CPC series with a GT64/GT65 Green Monitor (16 unique green shades) Amstrad CPC Plus series with the MM12 Monochrome monitor (16 shades of grey) Some Apple PowerBooks equipped with monochrome displays like the PowerBook 5300 The original VideoNow === 8-bit Grayscale === In an 8-bit color palette each pixel's value is represented by 8 bits resulting in a 256-value palette (28 = 256). This is usually the maximum number of grays in ordinary monochrome systems; each image pixel occupies a single memory byte. Most scanners can capture images in 8-bit grayscale, and image file formats like TIFF and JPEG natively support this monochrome palette size. Alpha channels employed for video overlay also use (conceptually) this palette. The gray level indicates the opacity of the blended image pixel over the background image pixel. == Dichrome palettes == === 16-bit RG palette === The RG or red–green color space is a color space that uses only two primary colors: red and green. It was used on early color processes for films. It was used as an additive format, similar to the RGB color model but without a blue channel, on processes such as Kinemacolor, Prizma, Technicolor I, Raycol, etc., producing shades of black, red, green and yellow. Alternatively, it was used as a subtractive format on Brewster Color I, Kodachrome I, Prizma II, Technicolor II, etc., producing shades of transparent, red, green and black. Until recently, its primary use was in low-cost light-emitting diode displays in which red and green tended to be far more common than the still nascent blue LED technology, but full-color LEDs with blue have become more common in recent years. ColorCode 3-D, a anaglyph stereoscopic color scheme, uses the RG color space to simulate a broad spectrum of color in one eye, while the blue portion of the spectrum transmits a black-and-white (black-and-blue) image to the other eye to give depth perception. === 16-bit RB palette === === 16-bit GB palette === == Regular RGB palettes == Here are grouped those full RGB hardware palettes that have the same number of binary levels (i.e., the same number of bits) for every red, green and blue components using the full RGB color model. Thus, the total number of colors are always the number of possible levels by component, n, raised to a power of 3: n×n×n = n3. === 3-bit RGB === 3-bit RGB dithering: Systems with a 3-bit RGB palette use 1 bit for each of the red, green and blue color components. That is, each component is either "on" or "off" with no intermediate states. This results in an 8-color palette ((21)3 = 23 = 8) that has black, white, the three RGB primary colors red, green and blue and their correspondent complementary colors cyan, magenta and yellow as follows: The color indices vary between implementations; therefore, index numbers are not given. The 3-bit RGB palette is used by: Text terminals following the ECMA-48 standard (sometimes known as the "ANSI standard", although ANSI X3.128 does not define colors) World System Teletext Level 1/1.5 Videotex Oric computers BBC Micro PC-8801 (up to the MkII) PC-9801 (with original 8086 CPU, before the VM/VX models) Sharp X1 (models before the X1 Turbo Z) Sharp MZ 700 FM-7, FM New 7, FM 77 (before the FM77AV) Sinclair QL Space Invaders Part II (arcade hardware) Macintosh SE (with a color printer or external monitor) Atari 2600 (SECAM version) Color Maximite (PIC32 based microcomputer) Arcadia 2001 PV-1000 Monkey Magic (arcade hardware) VIC-20 (high-res mode) Mouse Trap (arcade hardware) Sanyo MBC-550 series Windows 1.0 (includes dithering) === 6-bit RGB === Systems with a 6-bit RGB palette use 2 bits for each of the red, green, and blue color components. This results in a (22)3 = 43 = 64-color palette as follows: 6-bit RGB systems include the following: Enhanced Graphics Adapter (EGA) for IBM PC/AT (16 colors at once) Sega Master System video game console (32 colors at once) GIME for TRS-80 Color Computer 3 (16 colors at once) Pebble Time smartwatch which has a 6-bit (64 color) e-paper display Parallax Propeller using the reference VGA circuit === 9-bit RGB === Systems with a 9-bit RGB palette use 3 bits for each of the red, green, and blue color components. This results in a (23)3 = 83 = 512-color palette as follows: 9-bit RGB systems include the following: Atari ST (Normally 4 to 16 at once without tricks) MSX2 computers (up to 16 at once) Sega Genesis video game console, (64 colors at once) Sega Nomad TurboGrafx-16 (NEC PC-Engine) ZX Spectrum Next The NEC PC-88
Read more →
Open Compute Project

The Open Compute Project (OCP) is an organization that facilitates the sharing of data center product designs and industry best practices among companies. Founded in 2011, OCP has significantly influenced the design and operation of large-scale computing facilities worldwide. As of February 2025, over 400 companies across the world are members of OCP, including Arm, Meta, IBM, Wiwynn, Intel, Nokia, Google, Microsoft, Seagate Technology, Dell, Rackspace, Hewlett Packard Enterprise, NVIDIA, Cisco, Goldman Sachs, Fidelity, Lenovo, Accton Technology Corporation and Alibaba Group. == Structure == The Open Compute Project Foundation is a 501(c)(6) non-profit incorporated in the state of Delaware, United States. OCP has multiple committees, including the board of directors, advisory board and steering committee to govern its operations. As of July 2020, there are seven members who serve on the board of directors which is made up of one individual member and six organizational members. Mark Roenigk (Facebook) is the Foundation's president and chairman. Andy Bechtolsheim is the individual member. In addition to Mark Roenigk who represents Facebook, other organizations on the Open Compute board of directors include Intel (Rebecca Weekly), Microsoft (Kushagra Vaid), Google (Partha Ranganathan), and Rackspace (Jim Hawkins). A list of members can be found on the OCP website. == History == The Open Compute Project began at Facebook (now Meta) in 2009 as an internal project called "Project Freedom". The hardware designs and engineering teams were led by Amir Michael (Manager, Hardware Design) and sponsored by Jonathan Heiliger (VP, Technical Operations) and Frank Frankovsky (Director, Hardware Design and Infrastructure). The three would later open source the designs of Project Freedom and co-found the Open Compute Project. The project was announced at a press event at Facebook's headquarters in Palo Alto on April 7, 2011. == OCP projects == The Open Compute Project Foundation maintains a number of OCP projects, such as: === Server designs === In 2013, two years after the Open Compute Project had started, it was noted that the goal of a more modular server design was "still a long way from live data centers". However, by then some aspects published had been used in Facebook's Prineville data center to improve energy efficiency, as measured by the power usage effectiveness index defined by The Green Grid. Efforts to advance server compute node designs included one for Intel processors and one for AMD processors. Also in 2013, Calxeda contributed a design with ARM architecture processors. Since then, several generations of OCP server designs have been deployed: Wildcat (Intel), Spitfire (AMD), Windmill (Intel E5-2600), Watermark (AMD), Winterfell (Intel E5-2600 v2) and Leopard (Intel E5-2600 v3). === OCP Accelerator Module === OCP Accelerator Module (OAM) is a design specification for hardware architectures that implement artificial intelligence systems that require high module-to-module bandwidth. OAM is used in some of AMD's Instinct accelerator modules. === Rack and power designs === Designs for a mechanical mounting system to replace standard 19-inch racks have been published, with a cabinet the same outside width (600 mm) and depth as existing racks, but with an interior space allowing for wider equipment chassis with a 537 mm width (21 inches). This allows more equipment to fit in the same volume and improves air flow. Compute chassis sizes are defined in multiples of an OpenU or OU, which is 48 mm, slightly taller than the 44 mm rack unit defined for 19-inch racks. As of March 2026, the most current base mechanical definition is the Open Rack V3.1 Specification. At the time the base specification was released, Meta also defined in greater depth the specifications for the rectifiers and power shelf. Specifications for the power monitoring interface (PMI), a communications interface enabling upstream communications between the rectifiers and battery backup unit(BBU) were published by Meta that same year, with Delta Electronics as the main technical contributor to the BBU spec. However, since 2022 the AI boom in the data center has created higher power requirements in order to satisfy the demands of AI accelerators that have been released. As of September 2024, Meta is in the process of updating its Open Rack v3 rectifier, power shelf, battery backup and power management interface specifications to accommodate this increased energy demand. In May 2024, at an Open Compute regional summit, Meta and Rittal outlined their plans for development of their High Power Rack (HPR) ecosystem in conjunction with rack, power and cable partners, increasing power capacity in the rack to 92 kilowatts or more. At the same meeting, Delta Electronics and Advanced Energy reported on their progress in developing new Open Compute standard specifications for power shelf and rectifier designs for HPR applications. Rittal also outlined their collaboration with Meta in designing airflow containment, busbar designs and grounding schemes for the new HPR requirements. === Data storage === Open Vault storage building blocks (also called "Knox") offer high disk densities, with 30 drives in a 2 OU Open Rack chassis designed for easy disk drive replacement. The 3.5 inch disks are stored in two drawers, five across and three deep in each drawer, with connections via serial attached SCSI. There is a "cold storage" variant where idle disks power down to reduce energy consumption. Another design concept was contributed by Hyve Solutions, a division of Synnex, in 2012. At the OCP Summit 2016 Facebook, together with Taiwanese ODM Wistron's spin-off Wiwynn, introduced "Lightning", a flexible NVMe JBOF (just a bunch of flash), based on the existing Open Vault (Knox) design. === Energy efficient data centers === The OCP has published data center designs for energy efficiency. These include power distribution at three-phase 277/480 VAC, which eliminates one transformer stage in typical North American data centers, a single voltage (12.5 VDC) power supply designed to work with 277/480 VAC input, and 48 VDC battery backup. For European (and other 230V countries) datacenters, there is a specification for 230/400 VAC power distribution and its conversion to 12.5 VDC. === Open networking switches === On May 8, 2013, an effort to define an open network switch was announced. The plan was to allow Facebook to load its own operating system software onto its top-of-rack switches. Press reports predicted that more expensive and higher-performance switches would continue to be popular, while less expensive products treated more like a commodity. The first attempt at an open networking switch by Facebook was designed together with Taiwanese ODM Accton using Broadcom Trident II chip and is called "Wedge"; the Linux OS that it runs is called "FBOSS". Later switch contributions include "6-pack" and Wedge-100, based on Broadcom Tomahawk chips. Similar switch hardware designs have been contributed by: Accton Technology Corporation (and its Edgecore Networks subsidiary), Mellanox Technologies, Interface Masters Technologies, Agema Systems. Capable of running Open Network Install Environment (ONIE)-compatible network operating systems such as Cumulus Linux, Switch Light OS by Big Switch Networks, or PICOS by Pica8. A similar project for a custom switch for the Google platform had been rumored, and evolved to use the OpenFlow protocol. === Servers === A sub-project for Mezzanine (NIC) OCP NIC 3.0 specification 1v00 was released in late 2019 establishing three form factors: SFF, TSFF, and LFF. == Litigation == In March, 2015, BladeRoom Group Limited and Bripco (UK) Limited sued Facebook, Emerson Electric Co. and others alleging that Facebook has disclosed BladeRoom and Bripco's trade secrets for prefabricated data centers in the Open Compute Project. Facebook petitioned for the lawsuit to be dismissed, but this was rejected in 2017. A confidential mid-trial settlement was agreed in April 2018.
Read more →
Magic state distillation

Magic state distillation is a method for creating more accurate quantum states from multiple noisy ones, which is important for building fault tolerant quantum computers. It has also been linked to quantum contextuality, a concept thought to contribute to quantum computers' power. The technique was first proposed by Emanuel Knill in 2004, and further analyzed by Sergey Bravyi and Alexei Kitaev the same year. Thanks to the Gottesman–Knill theorem, it is known that some quantum operations (operations in the Clifford group) can be perfectly simulated in polynomial time on a classical computer. In order to achieve universal quantum computation, a quantum computer must be able to perform operations outside this set. Magic state distillation achieves this, in principle, by concentrating the usefulness of imperfect resources, represented by mixed states, into states that are conducive for performing operations that are difficult to simulate classically. A variety of qubit magic state distillation routines and distillation routines for qubits with various advantages have been proposed. == Stabilizer formalism == The Clifford group consists of a set of n {\displaystyle n} -qubit operations generated by the gates {H, S, CNOT} (where H is Hadamard and S is [ 1 0 0 i ] {\displaystyle {\begin{bmatrix}1&0\\0&i\end{bmatrix}}} ) called Clifford gates. The Clifford group generates stabilizer states which can be efficiently simulated classically, as shown by the Gottesman–Knill theorem. This set of gates with a non-Clifford operation is universal for quantum computation. == Magic states == Magic states are purified from n {\displaystyle n} copies of a mixed state ρ {\displaystyle \rho } . These states are typically provided via an ancilla to the circuit. A magic state for the π / 6 {\displaystyle \pi /6} rotation operator is | M ⟩ = cos ⁡ ( β / 2 ) | 0 ⟩ + e i π 4 sin ⁡ ( β / 2 ) | 1 ⟩ {\displaystyle |M\rangle =\cos(\beta /2)|0\rangle +e^{i{\frac {\pi }{4}}}\sin(\beta /2)|1\rangle } where β = arccos ⁡ ( 1 3 ) {\displaystyle \beta =\arccos \left({\frac {1}{\sqrt {3}}}\right)} . A non-Clifford gate can be generated by combining (copies of) magic states with Clifford gates. Since a set of Clifford gates combined with a non-Clifford gate is universal for quantum computation, magic states combined with Clifford gates are also universal. == Purification algorithm for distilling |M〉 == The first magic state distillation algorithm, invented by Sergey Bravyi and Alexei Kitaev, is as follows. Input: Prepare 5 imperfect states. Output: An almost pure state having a small error probability. repeat Apply the decoding operation of the five-qubit error correcting code and measure the syndrome. If the measured syndrome is | 0000 ⟩ {\displaystyle |0000\rangle } , the distillation attempt is successful. else Get rid of the resulting state and restart the algorithm. until The states have been distilled to the desired purity.
Read more →
Learning augmented algorithm

A learning augmented algorithm (also called algorithm with predictions) is an algorithm that can make use of a prediction to improve its performance. Whereas in regular algorithms just the problem instance is inputted, learning augmented algorithms accept an extra parameter. This extra parameter often is a prediction of some property of the solution. This prediction is then used by the algorithm to improve its running time or the quality of its output. The most common application are online algorithms, where a prediction on the uncertain instance is provided. == Description == A learning augmented algorithm typically takes an input ( I , A ) {\displaystyle ({\mathcal {I}},{\mathcal {A}})} . Here I {\displaystyle {\mathcal {I}}} is a problem instance and A {\displaystyle {\mathcal {A}}} is the prediction. A prediction can be any object. Common are the following types: Prediction of an optimal solution. The prediction gives a solution to the problem or characterizes an optimal solution. Prediction of the input. This is mainly used for online problems. Prediction of algorithmic actions. A prediction tailored to a specific algorithm that suggests a specific algorithm execution. Learning augmented algorithms usually satisfy the following three properties: Consistency. A learning augmented algorithm is said to be consistent if the algorithm can be proven to have a good performance when it is provided with an accurate prediction. Smoothness. A learning augmented algorithm is called smooth if its performance can be bounded by a function of the quality of the prediction. Here, the quality can be measured in a problem specific way. This is also called the prediction error. Robustness. A learning augmented algorithm is called robust if its worst-case performance can be bounded even if the given prediction is inaccurate. Learning augmented algorithms generally do not prescribe how the prediction should be done. For this purpose machine learning can be used. == Applications == A few examples of problems where learning augmented algorithms have been applied are the following. === Online algorithms === The ski rental problem The weighted paging problem The set cover problem Nonclairvoyant scheduling The online bipartite matching problem === Warm starting === ==== Data structures ==== The binary search algorithm is an algorithm for finding elements of a sorted list x 1 , … , x n {\displaystyle x_{1},\ldots ,x_{n}} . It needs O ( log ⁡ ( n ) ) {\displaystyle O(\log(n))} steps to find an element with some known value y {\displaystyle y} in a list of length n {\displaystyle n} . With a prediction i {\displaystyle i} for the position of y {\displaystyle y} , the following learning augmented algorithm can be used. First, look at position i {\displaystyle i} in the list. If x i = y {\displaystyle x_{i}=y} , the element has been found. If x i < y {\displaystyle x_{i} y {\displaystyle x_{i}>y} , do the same as in the previous case, but instead consider i − 1 , i − 2 , i − 4 , … {\displaystyle i-1,i-2,i-4,\ldots } . The error is defined to be η = | i − i ∗ | {\displaystyle \eta =|i-i^{}|} , where i ∗ {\displaystyle i^{}} is the real index of y {\displaystyle y} . In the learning augmented algorithm, probing the positions i + 1 , i + 2 , i + 4 , … {\displaystyle i+1,i+2,i+4,\ldots } takes log 2 ⁡ ( η ) {\displaystyle \log _{2}(\eta )} steps. Then a binary search is performed on a list of size at most 2 η {\displaystyle 2\eta } , which takes log 2 ⁡ ( η ) {\displaystyle \log _{2}(\eta )} steps. This makes the total running time of the algorithm 2 log 2 ⁡ ( η ) {\displaystyle 2\log _{2}(\eta )} . So, when the error is small, the algorithm is faster than a normal binary search. This shows that the algorithm is consistent. Even in the worst case, the error will be at most n {\displaystyle n} . Then the algorithm takes at most O ( log ⁡ ( n ) ) {\displaystyle O(\log(n))} steps, so the algorithm is robust. ==== More examples ==== The maximum weight matching problem === Approximation algorithms === The maximum cut problem The vertex cover problem === Mechanism Design === The facility location problem
Read more →
Solomonoff's theory of inductive inference

Solomonoff's theory of inductive inference proves that, under its common sense assumptions (axioms), the best possible scientific model is the shortest algorithm that generates the empirical data under consideration. In addition to the choice of data, other assumptions are that, to avoid the post-hoc fallacy, the programming language must be chosen prior to the data and that the environment being observed is generated by an unknown algorithm. This is also called a theory of induction. Due to its basis in the dynamical (state-space model) character of Algorithmic Information Theory, it encompasses statistical as well as dynamical information criteria for model selection. It was introduced by Ray Solomonoff, based on probability theory and theoretical computer science. In essence, Solomonoff's induction derives the posterior probability of any computable theory, given a sequence of observed data. This posterior probability is derived from Bayes' rule and some universal prior, that is, a prior that assigns a positive probability to any computable theory. Solomonoff proved that this induction is incomputable (or more precisely, lower semi-computable), but noted that "this incomputability is of a very benign kind", and that it "in no way inhibits its use for practical prediction" (as it can be approximated from below more accurately with more computational resources). It is only "incomputable" in the benign sense that no scientific consensus is able to prove that the best current scientific theory is the best of all possible theories. However, Solomonoff's theory does provide an objective criterion for deciding among the current scientific theories explaining a given set of observations. Solomonoff's induction naturally formalizes Occam's razor by assigning larger prior credences to theories that require a shorter algorithmic description. == Origin == === Philosophical === The theory is based in philosophical foundations, and was founded by Ray Solomonoff around 1960. It is a mathematically formalized combination of Occam's razor and the Principle of Multiple Explanations. All computable theories which perfectly describe previous observations are used to calculate the probability of the next observation, with more weight put on the shorter computable theories. Marcus Hutter's universal artificial intelligence builds upon this to calculate the expected value of an action. === Principle === Solomonoff's induction has been argued to be the computational formalization of pure Bayesianism. To understand, recall that Bayesianism derives the posterior probability P [ T | D ] {\displaystyle \mathbb {P} [T|D]} of a theory T {\displaystyle T} given data D {\displaystyle D} by applying Bayes rule, which yields P [ T | D ] = P [ D | T ] P [ T ] P [ D | T ] P [ T ] + ∑ A ≠ T P [ D | A ] P [ A ] {\displaystyle \mathbb {P} [T|D]={\frac {\mathbb {P} [D|T]\mathbb {P} [T]}{\mathbb {P} [D|T]\mathbb {P} [T]+\sum _{A\neq T}\mathbb {P} [D|A]\mathbb {P} [A]}}} where theories A {\displaystyle A} are alternatives to theory T {\displaystyle T} . For this equation to make sense, the quantities P [ D | T ] {\displaystyle \mathbb {P} [D|T]} and P [ D | A ] {\displaystyle \mathbb {P} [D|A]} must be well-defined for all theories T {\displaystyle T} and A {\displaystyle A} . In other words, any theory must define a probability distribution over observable data D {\displaystyle D} . Solomonoff's induction essentially boils down to demanding that all such probability distributions be computable. Interestingly, the set of computable probability distributions is a subset of the set of all programs, which is countable. Similarly, the sets of observable data considered by Solomonoff were finite. Without loss of generality, we can thus consider that any observable data is a finite bit string. As a result, Solomonoff's induction can be defined by only invoking discrete probability distributions. Solomonoff's induction then allows to make probabilistic predictions of future data F {\displaystyle F} , by simply obeying the laws of probability. Namely, we have P [ F | D ] = E T [ P [ F | T , D ] ] = ∑ T P [ F | T , D ] P [ T | D ] {\displaystyle \mathbb {P} [F|D]=\mathbb {E} _{T}[\mathbb {P} [F|T,D]]=\sum _{T}\mathbb {P} [F|T,D]\mathbb {P} [T|D]} . This quantity can be interpreted as the average predictions P [ F | T , D ] {\displaystyle \mathbb {P} [F|T,D]} of all theories T {\displaystyle T} given past data D {\displaystyle D} , weighted by their posterior credences P [ T | D ] {\displaystyle \mathbb {P} [T|D]} . === Mathematical === The proof of the "razor" is based on the known mathematical properties of a probability distribution over a countable set. These properties are relevant because the infinite set of all programs is a denumerable set. The sum S of the probabilities of all programs must be exactly equal to one (as per the definition of probability) thus the probabilities must roughly decrease as we enumerate the infinite set of all programs, otherwise S will be strictly greater than one. To be more precise, for every ϵ {\displaystyle \epsilon } > 0, there is some length l such that the probability of all programs longer than l is at most ϵ {\displaystyle \epsilon } . This does not, however, preclude very long programs from having very high probability. Fundamental ingredients of the theory are the concepts of algorithmic probability and Kolmogorov complexity. The universal prior probability of any prefix p of a computable sequence x is the sum of the probabilities of all programs (for a universal computer) that compute something starting with p. Given some p and any computable but unknown probability distribution from which x is sampled, the universal prior and Bayes' theorem can be used to predict the yet unseen parts of x in optimal fashion. == Mathematical guarantees == === Solomonoff's completeness === The remarkable property of Solomonoff's induction is its completeness. In essence, the completeness theorem guarantees that the expected cumulative errors made by the predictions based on Solomonoff's induction are upper-bounded by the Kolmogorov complexity of the (stochastic) data generating process. The errors can be measured using the Kullback–Leibler divergence or the square of the difference between the induction's prediction and the probability assigned by the (stochastic) data generating process. === Solomonoff's uncomputability === Unfortunately, Solomonoff also proved that Solomonoff's induction is uncomputable. In fact, he showed that computability and completeness are mutually exclusive: any complete theory must be uncomputable. The proof of this is derived from a game between the induction and the environment. Essentially, any computable induction can be tricked by a computable environment, by choosing the computable environment that negates the computable induction's prediction. This fact can be regarded as an instance of the no free lunch theorem. == Modern applications == === Artificial intelligence === Though Solomonoff's inductive inference is not computable, several AIXI-derived algorithms approximate it in order to make it run on a modern computer. The more computing power they are given, the closer their predictions are to the predictions of inductive inference (their mathematical limit is Solomonoff's inductive inference). Another direction of inductive inference is based on E. Mark Gold's model of learning in the limit from 1967 and has developed since then more and more models of learning. The general scenario is the following: Given a class S of computable functions, is there a learner (that is, recursive functional) which for any input of the form (f(0),f(1),...,f(n)) outputs a hypothesis (an index e with respect to a previously agreed on acceptable numbering of all computable functions; the indexed function may be required consistent with the given values of f). A learner M learns a function f if almost all its hypotheses are the same index e, which generates the function f; M learns S if M learns every f in S. Basic results are that all recursively enumerable classes of functions are learnable while the class REC of all computable functions is not learnable. Many related models have been considered and also the learning of classes of recursively enumerable sets from positive data is a topic studied from Gold's pioneering paper in 1967 onwards. A far reaching extension of the Gold’s approach is developed by Schmidhuber's theory of generalized Kolmogorov complexities, which are kinds of super-recursive algorithms.
Read more →
OpenSMILE

openSMILE is source-available software for automatic extraction of features from audio signals and for classification of speech and music signals. "SMILE" stands for "Speech & Music Interpretation by Large-space Extraction". The software is mainly applied in the area of automatic emotion recognition and is widely used in the affective computing research community. The openSMILE project exists since 2008 and is maintained by the German company audEERING GmbH since 2013. openSMILE is provided free of charge for research purposes and personal use under a source-available license. For commercial use of the tool, the company audEERING offers custom license options. == Application Areas == openSMILE is used for academic research as well as for commercial applications in order to automatically analyze speech and music signals in real-time. In contrast to automatic speech recognition which extracts the spoken content out of a speech signal, openSMILE is capable of recognizing the characteristics of a given speech or music segment. Examples for such characteristics encoded in human speech are a speaker's emotion, age, gender, and personality, as well as speaker states like depression, intoxication, or vocal pathological disorders. The software further includes music classification technology for automatic music mood detection and recognition of chorus segments, key, chords, tempo, meter, dance-style, and genre. The openSMILE toolkit serves as benchmark in manifold research competitions such as Interspeech ComParE, AVEC, MediaEval, and EmotiW. == History == The openSMILE project was started in 2008 by Florian Eyben, Martin Wöllmer, and Björn Schuller at the Technical University of Munich within the European Union research project SEMAINE. The goal of the SEMAINE project was to develop a virtual agent with emotional and social intelligence. In this system, openSMILE was applied for real-time analysis of speech and emotion. The final SEMAINE software release is based on openSMILE version 1.0.1. In 2009, the emotion recognition toolkit (openEAR) was published based on openSMILE. "EAR" stands for "Emotion and Affect Recognition". In 2010, openSMILE version 1.0.1 was published and was introduced and awarded at the ACM Multimedia Open-Source Software Challenge. Between 2011 and 2013, the technology of openSMILE was extended and improved by Florian Eyben and Felix Weninger in the context of their doctoral thesis at the Technical University of Munich. The software was also applied for the project ASC-Inclusion, which was funded by the European Union. For this project, the software was extended by Erik Marchi in order to teach emotional expression to autistic children, based on automatic emotion recognition and visualization. In 2013, the company audEERING acquired the rights to the code-base from the Technical University of Munich and version 2.0 was published under a source-available research license. Until 2016, openSMILE was downloaded more than 50,000 times worldwide and has established itself as a standard toolkit for emotion recognition. == Awards == openSMILE was awarded in 2010 in the context of the ACM Multimedia Open Source Competition. The software tool is applied in numerous scientific publications on automatic emotion recognition. openSMILE and its extension openEAR have been cited in more than 1000 scientific publications until today.
Read more →
Umbrella review

In medical research, an umbrella review is a review of systematic reviews or meta-analyses. They may also be called overviews of reviews, reviews of reviews, summaries of systematic reviews, or syntheses of reviews. Umbrella reviews are among the highest levels of evidence currently available in medicine. By summarizing information from multiple overview articles, umbrella reviews make it easier to review the evidence and allow for comparison of results between each of the individual reviews. Umbrella reviews may address a broader question than a typical review, such as discussing multiple different treatment comparisons instead of only one. They are especially useful for developing guidelines and clinical practice, and when comparing competing interventions.
Read more →
Behavior selection algorithm

In artificial intelligence, a behavior selection algorithm, or action selection algorithm, is an algorithm that selects appropriate behaviors or actions for one or more intelligent agents. In game artificial intelligence, it selects behaviors or actions for one or more non-player characters. Common behavior selection algorithms include: Finite-state machines Hierarchical finite-state machines Decision trees Behavior trees Hierarchical task networks Hierarchical control systems Utility systems Dialogue tree (for selecting what to say) == Related concepts == In application programming, run-time selection of the behavior of a specific method is referred to as the strategy design pattern.
Read more →
Computer Graphics International

Computer Graphics International (CGI) is one of the oldest annual international conferences on computer graphics. It is organized by the Computer Graphics Society (CGS). Researchers across the whole world are invited to share their experiences and novel achievements in various fields - like computer graphics and human-computer interaction. Former conferences have been held recently in Hong Kong (China), Geneva (Switzerland), Shanghai (China), Geneva (virtually), Calgary (Canada), Bintan (Indonesia) and Yokohama (Japan). == Awards == Starting in the year of 2013, CGI has given yearly a Best Paper Award and a Career Achievement Award. == Venues ==
Read more →
Algorithmic logic

Algorithmic logic is a calculus of programs that allows the expression of semantic properties of programs by appropriate logical formulas. It provides a framework that enables proving the formulas from the axioms of program constructs such as assignment, iteration and composition instructions and from the axioms of the data structures in question see Mirkowska & Salwicki (1987), Banachowski et al. (1977). The following diagram helps to locate algorithmic logic among other logics. [ P r o p o s i t i o n a l l o g i c o r S e n t e n t i a l c a l c u l u s ] ⊂ [ P r e d i c a t e c a l c u l u s o r F i r s t o r d e r l o g i c ] ⊂ [ C a l c u l u s o f p r o g r a m s o r Algorithmic logic ] {\displaystyle \qquad \left[{\begin{array}{l}\mathrm {Propositional\ logic} \\or\\\mathrm {Sentential\ calculus} \end{array}}\right]\subset \left[{\begin{array}{l}\mathrm {Predicate\ calculus} \\or\\\mathrm {First\ order\ logic} \end{array}}\right]\subset \left[{\begin{array}{l}\mathrm {Calculus\ of\ programs} \\or\\{\mbox{Algorithmic logic}}\end{array}}\right]} The formalized language of algorithmic logic (and of algorithmic theories of various data structures) contains three types of well formed expressions: Terms - i.e. expressions denoting operations on elements of data structures, formulas - i.e. expressions denoting the relations among elements of data structures, programs - i.e. algorithms - these expressions describe the computations. For semantics of terms and formulas consult pages on first-order logic and Tarski's semantics. The meaning of a program K {\displaystyle K} is the set of possible computations of the program. Algorithmic logic is one of many logics of programs. Another logic of programs is dynamic logic, see dynamic logic, Harel, Kozen & Tiuryn (2000).
Read more →
Information professional

The term information professional or information specialist refers to professionals responsible for the collection, documentation, organization, storage, preservation, retrieval, and dissemination of printed and digital information. The service delivered to the client is known as an information service. The term "information professional" is a versatile one, used to describe similar and sometimes overlapping professions, such as librarians, archivists, information managers, information systems specialists, information scientists, records managers, and information consultants. However, terminology differs among sources and organisations. Information professionals are employed in a variety of private, public, and academic institutions, as well as independently. == Skills == Since the term information professional is broad, the skills required for this profession are also varied. A Gartner report in 2011 pointed out that "Professional roles focused on information management will be different to that of established IT roles. An 'information professional' will not be one type of role or skill set, but will in fact have a number of specializations". Thus, an information professional can possess a variety of different skills, depending on the sector in which the person is employed. Some essential cross-sector skills are: IT skills, such as word-processing and spreadsheets, digitisation skills, and conducting Internet searches, together with skills loan systems, databases, content management systems, and specially designed programmes and packages. Customer service. An information professional should have the ability to address the information needs of customers. Language proficiency. This is essential in order to manage the information at hand and deal with customer needs. Soft skills. These include skills such as negotiating, conflict resolution, and time management. Management training. An information professional should be familiar with notions such as strategic planning and project management. Moreover, an information professional should be skilled in planning and using relevant systems, in capturing and securing information, and in accessing it to deliver service whenever the information is required. == Associations == Most countries have a professional association who oversee the professional and academic standards of librarians and other information professionals. There are also international associations related to LIS (library and information science), the most prominent of which is the International Federation of Library Associations and Institutions (IFLA). In many countries, LIS courses are accredited by the relevant professional association, as the American Library Association (ALA) in the USA, the Chartered Institute of Library and Information Professionals (CILIP) in the UK, and the Australian Library and Information Association (ALIA) in Australia. == Qualifications == Educational institutions around the world offer academic degrees, or degrees on related subjects such as Archival Studies, Information Systems, Information Management, and Records Management. Some of the institutions offering information science education refer to themselves as an iSchool, such as the CiSAP (Consortium of iSchools Asia Pacific, founded 2006) in Asia and the iSchool Caucus in the USA. There are also online e-learning resources, some of which offer certification for information professionals. === Africa === Information development in Africa started later than in other continents, mainly due to a lack of internet access, expertise and resources to manage digital infrastructure, and "opportunities for capacity development and knowledge-sharing". Nowadays, academic degrees in information studies are available at many universities of African countries, such as the University of Pretoria (South Africa), University of Nairobi (Kenya), Makerere University (Uganda), University of Botswana (Botswana), and University of Nigeria (Nigeria). === Asia === LIS-related studies are available in more than 30 Asian countries. Some examples listed by iSchools Inc. are the University of Hong Kong, University of Tsukuba, Japan, Yonsei University, South Korea, National Taiwan University and Wuhan University, China. Centre of Library and Information Management Science (CLIMS) at Tata Institute of Social Science in Mumbai, India. In Southeast Asia, the Congress of Southeast Asian Librarians (CONSAL) connects librarians and libraries in more than 10 countries with resources, networking opportunities, and support for growing library systems. === Australasia === The Australian Library and Information Association (ALIA) as of 2021 lists six schools offering undergraduate and postgraduate accredited university courses for "Librarian and Information Specialists" on their website. In New Zealand, the Open Polytechnic of New Zealand and the Victoria University of Wellington offer undergraduate and postgraduate degree courses for information professionals. === Europe === The majority of European countries have universities, colleges, or schools which offer bachelor's degrees in LIS studies. Over 40 universities offer master's degrees in LIS-related fields, and many institutions, such as the Swedish School of Library and Information Science at the University of Borås (Sweden), the University of Barcelona (Spain), Loughborough University (UK), and Aberystwyth University (Wales, UK) also offer PhD degrees. === North America === Information studies and degrees are available at numerous academic institutions throughout the U.S. and Canada. U.S. professional associations, together with their European counterparts, have undertaken many educational initiatives and pioneered many advances in the field of Information studies, such as increased interdisciplinarity and more effective delivery of distance learning. The Association for Intelligent Information Management, based in Silver Spring, Maryland, offers a qualification called Certified Information Professional (CIP), earned upon passing an examination, with certification remaining valid for three years. === South America === There are many schools and colleges in Latin America, which offer courses in Library Science, Archival Studies, and Information Studies, however these subjects are taught completely separately.
Read more →