AI For Young Learners Pdf

AI For Young Learners Pdf — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Client honeypot

  Honeypots are security devices whose value lie in being probed and compromised. Traditional honeypots are servers (or devices that expose server services) that wait passively to be attacked. Client Honeypots are active security devices in search of malicious servers that attack clients. The client honeypot poses as a client and interacts with the server to examine whether an attack has occurred. Often the focus of client honeypots is on web browsers, but any client that interacts with servers can be part of a client honeypot (for example ftp, email, ssh, etc.). There are several terms that are used to describe client honeypots. Besides client honeypot, which is the generic classification, honeyclient is the other term that is generally used and accepted. However, there is a subtlety here, as "honeyclient" is actually a homograph that could also refer to the first known open source client honeypot implementation (see below), although this should be clear from the context. == Architecture == A client honeypot is composed of three components. The first component, a queuer, is responsible for creating a list of servers for the client to visit. This list can be created, for example, through crawling. The second component is the client itself, which is able to make a requests to servers identified by the queuer. After the interaction with the server has taken place, the third component, an analysis engine, is responsible for determining whether an attack has taken place on the client honeypot. In addition to these components, client honeypots are usually equipped with some sort of containment strategy to prevent successful attacks from spreading beyond the client honeypot. This is usually achieved through the use of firewalls and virtual machine sandboxes. Analogous to traditional server honeypots, client honeypots are mainly classified by their interaction level: high or low; which denotes the level of functional interaction the server can utilize on the client honeypot. In addition to this there are also newly hybrid approaches which denotes the usage of both high and low interaction detection techniques. == High interaction == High interaction client honeypots are fully functional systems comparable to real systems with real clients. As such, no functional limitations (besides the containment strategy) exist on high interaction client honeypots. Attacks on high interaction client honeypots are detected via inspection of the state of the system after a server has been interacted with. The detection of changes to the client honeypot may indicate the occurrence of an attack against that has exploited a vulnerability of the client. An example of such a change is the presence of a new or altered file. High interaction client honeypots are very effective at detecting unknown attacks on clients. However, the tradeoff for this accuracy is a performance hit from the amount of system state that has to be monitored to make an attack assessment. Also, this detection mechanism is prone to various forms of evasion by the exploit. For example, an attack could delay the exploit from immediately triggering (time bombs) or could trigger upon a particular set of conditions or actions (logic bombs). Since no immediate, detectable state change occurred, the client honeypot is likely to incorrectly classify the server as safe even though it did successfully perform its attack on the client. Finally, if the client honeypots are running in virtual machines, then an exploit may try to detect the presence of the virtual environment and cease from triggering or behave differently. === Capture-HPC === Capture [1] is a high interaction client honeypot developed by researchers at Victoria University of Wellington, NZ. Capture differs from existing client honeypots in various ways. First, it is designed to be fast. State changes are being detected using an event based model allowing to react to state changes as they occur. Second, Capture is designed to be scalable. A central Capture server is able to control numerous clients across a network. Third, Capture is supposed to be a framework that allows to utilize different clients. The initial version of Capture supports Internet Explorer, but the current version supports all major browsers (Internet Explorer, Firefox, Opera, Safari) as well as other HTTP aware client applications, such as office applications and media players. === HoneyClient === HoneyClient [2] is a web browser based (IE/FireFox) high interaction client honeypot designed by Kathy Wang in 2004 and subsequently developed at MITRE. It was the first open source client honeypot and is a mix of Perl, C++, and Ruby. HoneyClient is state-based and detects attacks on Windows clients by monitoring files, process events, and registry entries. It has integrated the Capture-HPC real-time integrity checker to perform this detection. HoneyClient also contains a crawler, so it can be seeded with a list of initial URLs from which to start and can then continue to traverse web sites in search of client-side malware. === HoneyMonkey (dead since 2010) === HoneyMonkey [3] is a web browser based (IE) high interaction client honeypot implemented by Microsoft in 2005. It is not available for download. HoneyMonkey is state based and detects attacks on clients by monitoring files, registry, and processes. A unique characteristic of HoneyMonkey is its layered approach to interacting with servers in order to identify zero-day exploits. HoneyMonkey initially crawls the web with a vulnerable configuration. Once an attack has been identified, the server is reexamined with a fully patched configuration. If the attack is still detected, one can conclude that the attack utilizes an exploit for which no patch has been publicly released yet and therefore is quite dangerous. === SHELIA (dead since 2009) === Shelia [4] is a high interaction client honeypot developed by Joan Robert Rocaspana at Vrije Universiteit Amsterdam. It integrates with an email reader and processes each email it receives (URLs & attachments). Depending on the type of URL or attachment received, it opens a different client application (e.g. browser, office application, etc.) It monitors whether executable instructions are executed in data area of memory (which would indicate a buffer overflow exploit has been triggered). With such an approach, SHELIA is not only able to detect exploits, but is able to actually ward off exploits from triggering. === UW Spycrawler === The Spycrawler [5] developed at the University of Washington is yet another browser based (Mozilla) high interaction client honeypot developed by Moshchuk et al. in 2005. This client honeypot is not available for download. The Spycrawler is state based and detects attacks on clients by monitoring files, processes, registry, and browser crashes. Spycrawlers detection mechanism is event based. Further, it increases the passage of time of the virtual machine the Spycrawler is operating in to overcome (or rather reduce the impact of) time bombs. === Web Exploit Finder === WEF [6] is an implementation of an automatic drive-by-download – detection in a virtualized environment, developed by Thomas Müller, Benjamin Mack and Mehmet Arziman, three students from the Hochschule der Medien (HdM), Stuttgart during the summer term in 2006. WEF can be used as an active HoneyNet with a complete virtualization architecture underneath for rollbacks of compromised virtualized machines. == Low interaction == Low interaction client honeypots differ from high interaction client honeypots in that they do not utilize an entire real system, but rather use lightweight or simulated clients to interact with the server. (in the browser world, they are similar to web crawlers). Responses from servers are examined directly to assess whether an attack has taken place. This could be done, for example, by examining the response for the presence of malicious strings. Low interaction client honeypots are easier to deploy and operate than high interaction client honeypots and also perform better. However, they are likely to have a lower detection rate since attacks have to be known to the client honeypot in order for it to detect them; new attacks are likely to go unnoticed. They also suffer from the problem of evasion by exploits, which may be exacerbated due to their simplicity, thus making it easier for an exploit to detect the presence of the client honeypot. === HoneyC === HoneyC [7] is a low interaction client honeypot developed at Victoria University of Wellington by Christian Seifert in 2006. HoneyC is a platform independent open source framework written in Ruby. It currently concentrates driving a web browser simulator to interact with servers. Malicious servers are detected by statically examining the web server's response for malicious strings through the usage of Snort signatures. === Monkey-Spider (dead since 2008) === Monkey-Spider [8] is a low-interaction client honeypot i

  Read more →
• 

  You Only Look Once

  You Only Look Once (YOLO) is a series of real-time object detection systems based on convolutional neural networks. First introduced by Joseph Redmon et al. in 2015, YOLO has undergone several iterations and improvements, becoming one of the most popular object detection frameworks. The name "You Only Look Once" refers to the fact that the algorithm requires only one forward propagation pass through the neural network to make predictions, unlike previous region proposal-based techniques like R-CNN that require thousands for a single image. == Overview == Compared to previous methods like R-CNN and OverFeat, instead of applying the model to an image at multiple locations and scales, YOLO applies a single neural network to the full image. This network divides the image into regions and predicts bounding boxes and probabilities for each region. These bounding boxes are weighted by the predicted probabilities. === OverFeat === OverFeat was an early influential model for simultaneous object classification and localization. Its architecture is as follows: Train a neural network for image classification only ("classification-trained network"). This could be one like the AlexNet. The last layer of the trained network is removed, and for every possible object class, initialize a network module at the last layer ("regression network"). The base network has its parameters frozen. The regression network is trained to predict the ( x , y ) {\displaystyle (x,y)} coordinates of two corners of the object's bounding box. During inference time, the classification-trained network is run over the same image over many different zoom levels and croppings. For each, it outputs a class label and a probability for that class label. Each output is then processed by the regression network of the corresponding class. This results in thousands of bounding boxes with class labels and probability. These boxes are merged until only one single box with a single class label remains. == Versions == There are two parts to the YOLO series. The original part contained YOLOv1, v2, and v3, all released on a website maintained by Joseph Redmon. === YOLOv1 === The original YOLO algorithm, introduced in 2015, divides the image into an S × S {\displaystyle S\times S} grid of cells. If the center of an object's bounding box falls into a grid cell, that cell is said to "contain" that object. Each grid cell predicts B bounding boxes and confidence scores for those boxes. These confidence scores reflect how confident the model is that the box contains an object and how accurate it thinks the box is that it predicts. In more detail, the network performs the same convolutional operation over each of the S 2 {\displaystyle S^{2}} patches. The output of the network on each patch is a tuple as follows: ( p 1 , … , p C , c 1 , x 1 , y 1 , w 1 , h 1 , … , c B , x B , y B , w B , h B ) {\displaystyle (p_{1},\dots ,p_{C},c_{1},x_{1},y_{1},w_{1},h_{1},\dots ,c_{B},x_{B},y_{B},w_{B},h_{B})} where p i {\displaystyle p_{i}} is the conditional probability that the cell contains an object of class i {\displaystyle i} , conditional on the cell containing at least one object. x j , y j , w j , h j {\displaystyle x_{j},y_{j},w_{j},h_{j}} are the center coordinates, width, and height of the j {\displaystyle j} -th predicted bounding box that is centered in the cell. Multiple bounding boxes are predicted to allow each prediction to specialize in one kind of bounding box. For example, slender objects might be predicted by j = 2 {\displaystyle j=2} while stout objects might be predicted by j = 1 {\displaystyle j=1} . c j {\displaystyle c_{j}} is the predicted intersection over union (IoU) of each bounding box with its corresponding ground truth. The network architecture has 24 convolutional layers followed by 2 fully connected layers. During training, for each cell, if it contains a ground truth bounding box, then only the predicted bounding boxes with the highest IoU with the ground truth bounding boxes is used for gradient descent. Concretely, let j {\displaystyle j} be that predicted bounding box, and let i {\displaystyle i} be the ground truth class label, then x j , y j , w j , h j {\displaystyle x_{j},y_{j},w_{j},h_{j}} are trained by gradient descent to approach the ground truth, p i {\displaystyle p_{i}} is trained towards 1 {\displaystyle 1} , other p i ′ {\displaystyle p_{i'}} are trained towards zero. If a cell contains no ground truth, then only c 1 , c 2 , … , c B {\displaystyle c_{1},c_{2},\dots ,c_{B}} are trained by gradient descent to approach zero. === YOLOv2 === Released in 2016, YOLOv2 (also known as YOLO9000) improved upon the original model by incorporating batch normalization, a higher resolution classifier, and using anchor boxes to predict bounding boxes. It could detect over 9000 object categories. It was also released on GitHub under the Apache 2.0 license. === YOLOv3 === YOLOv3, introduced in 2018, contained only "incremental" improvements, including the use of a more complex backbone network, multiple scales for detection, and a more sophisticated loss function. === YOLOv4 and beyond === Subsequent versions of YOLO (v4, v5, etc.) have been developed by different researchers, further improving performance and introducing new features. These versions are not officially associated with the original YOLO authors but build upon their work. As of 2026, versions up to YOLO26 have been released..

  Read more →
• 

  Open information extraction

  In natural language processing, open information extraction (OIE) is the task of generating a structured, machine-readable representation of the information in text, usually in the form of triples or n-ary propositions. == Overview == A proposition can be understood as truth-bearer, a textual expression of a potential fact (e.g., "Dante wrote the Divine Comedy"), represented in an amenable structure for computers [e.g., ("Dante", "wrote", "Divine Comedy")]. An OIE extraction normally consists of a relation and a set of arguments. For instance, ("Dante", "passed away in" "Ravenna") is a proposition formed by the relation "passed away in" and the arguments "Dante" and "Ravenna". The first argument is usually referred as the subject while the second is considered to be the object. The extraction is said to be a textual representation of a potential fact because its elements are not linked to a knowledge base. Furthermore, the factual nature of the proposition has not yet been established. In the above example, transforming the extraction into a full fledged fact would first require linking, if possible, the relation and the arguments to a knowledge base. Second, the truth of the extraction would need to be determined. In computer science transforming OIE extractions into ontological facts is known as relation extraction. In fact, OIE can be seen as the first step to a wide range of deeper text understanding tasks such as relation extraction, knowledge-base construction, question answering, semantic role labeling. The extracted propositions can also be directly used for end-user applications such as structured search (e.g., retrieve all propositions with "Dante" as subject). OIE was first introduced by TextRunner developed at the University of Washington Turing Center headed by Oren Etzioni. Other methods introduced later such as Reverb, OLLIE, ClausIE or CSD helped to shape the OIE task by characterizing some of its aspects. At a high level, all of these approaches make use of a set of patterns to generate the extractions. Depending on the particular approach, these patterns are either hand-crafted or learned. == OIE systems and contributions == Reverb suggested the necessity to produce meaningful relations to more accurately capture the information in the input text. For instance, given the sentence "Faust made a pact with the devil", it would be erroneous to just produce the extraction ("Faust", "made", "a pact") since it would not be adequately informative. A more precise extraction would be ("Faust", "made a pact with", "the devil"). Reverb also argued against the generation of overspecific relations. OLLIE stressed two important aspects for OIE. First, it pointed to the lack of factuality of the propositions. For instance, in a sentence like "If John studies hard, he will pass the exam", it would be inaccurate to consider ("John", "will pass", "the exam") as a fact. Additionally, the authors indicated that an OIE system should be able to extract non-verb mediated relations, which account for significant portion of the information expressed in natural language text. For instance, in the sentence "Obama, the former US president, was born in Hawaii", an OIE system should be able to recognize a proposition ("Obama", "is", "former US president"). ClausIE introduced the connection between grammatical clauses, propositions, and OIE extractions. The authors stated that as each grammatical clause expresses a proposition, each verb mediated proposition can be identified by solely recognizing the set of clauses expressed in each sentence. This implies that to correctly recognize the set of propositions in an input sentence, it is necessary to understand its grammatical structure. The authors studied the case in the English language that only admits seven clause types, meaning that the identification of each proposition only requires defining seven grammatical patterns. The finding also established a separation between the recognition of the propositions and its materialization. In a first step, the proposition can be identified without any consideration of its final form, in a domain-independent and unsupervised way, mostly based on linguistic principles. In a second step, the information can be represented according to the requirements of the underlying application, without conditioning the identification phase. Consider the sentence "Albert Einstein was born in Ulm and died in Princeton". The first step will recognize the two propositions ("Albert Einstein", "was born", "in Ulm") and ("Albert Einstein", "died", "in Princeton"). Once the information has been correctly identified, the propositions can take the particular form required by the underlying application [e.g., ("Albert Einstein", "was born in", "Ulm") and ("Albert Einstein", "died in", "Princeton")]. CSD introduced the idea of minimality in OIE. It considers that computers can make better use of the extractions if they are expressed in a compact way. This is especially important in sentences with subordinate clauses. In these cases, CSD suggests the generation of nested extractions. For example, consider the sentence "The Embassy said that 6,700 Americans were in Pakistan". CSD generates two extractions [i] ("6,700 Americans", "were", "in Pakistan") and [ii] ("The Embassy", "said", "that [i]"). This is usually known as reification.

  Read more →
• 

  Bigram

  A bigram or digram is a sequence of two adjacent elements from a string of tokens, which are typically letters, syllables, or words. A bigram is an n-gram for n=2. The frequency distribution of every bigram in a string is commonly used for simple statistical analysis of text in many applications, including in computational linguistics, cryptography, and speech recognition. Gappy bigrams or skipping bigrams are word pairs which allow gaps (perhaps avoiding connecting words, or allowing some simulation of dependencies, as in a dependency grammar). == Applications == Bigrams, along with other n-grams, are used in most successful language models for speech recognition. Bigram frequency attacks can be used in cryptography to solve cryptograms. See frequency analysis. Bigram frequency is one approach to statistical language identification. Some activities in logology or recreational linguistics involve bigrams. These include attempts to find English words beginning with every possible bigram, or words containing a string of repeated bigrams, such as logogogue. == Bigram frequency in the English language == The frequency of the most common letter bigrams in a large English corpus is: th 3.56% of 1.17% io 0.83% he 3.07% ed 1.17% le 0.83% in 2.43% is 1.13% ve 0.83% er 2.05% it 1.12% co 0.79% an 1.99% al 1.09% me 0.79% re 1.85% ar 1.07% de 0.76% on 1.76% st 1.05% hi 0.76% at 1.49% to 1.05% ri 0.73% en 1.45% nt 1.04% ro 0.73% nd 1.35% ng 0.95% ic 0.70% ti 1.34% se 0.93% ne 0.69% es 1.34% ha 0.93% ea 0.69% or 1.28% as 0.87% ra 0.69% te 1.20% ou 0.87% ce 0.65%

  Read more →
• 

  Research software engineering

  Research software engineering is the application of software engineering practices, methods and techniques for research software, i.e. software that was made for and is mainly used within research projects. As usual for software engineering, this also includes knowledge of other (and in this case varying) research fields as well as open science that need to be incorporated into a software development process. The term was proposed in a research paper in 2010 in response to an empirical survey on tools used for software development in research projects. It started to be used in United Kingdom in 2012, when it was needed to define the type of software development needed in research. This focuses on reproducibility, reusability, and accuracy of data analysis and applications created for research. == Support == Various type of associations and organisations have been created around this role to support the creation of posts in universities and research institutes. In 2014 a Research Software Engineer Association was created in UK, which attracted 160 members in the first three months and which lead to the creation of the Society of Research Software Engineering in 2019. Other countries like the Netherlands, Germany, and the USA followed creating similar communities and there are similar efforts being pursued in Asia, Australia, Canada, New Zealand, the Nordic countries, and Belgium. In January 2021 the International Council of RSE Associations was introduced. UK counts over 40 universities and institutes with groups that provide access to software expertise to different areas of research. Additionally, the Engineering and Physical Sciences Research Council created a Research Software Engineer fellowship to promote this role and help the creation of RSE groups across UK, with calls in 2015, 2017, and 2020. The world first RSE conference took place in UK in September 2016 and it has been repeated annually (except for a gap in 2020) since. In 2019 the first national RSE conferences in Germany and the Netherlands were held, next editions were planned for 2020 and then cancelled. US-RSE held its first national conference in 2023. The Research Software Alliance was formed in 2019 to advance the global research software ecosystem by collaborating with decision makers and key influencers. The SORSE (A Series of Online Research Software Events) community was established in late‑2020 in response to the COVID-19 pandemic and ran its first online event in September 2020.

  Read more →
• 

  StatMuse

  StatMuse Inc. is an American artificial intelligence company founded in 2014. It operates an eponymous website that hosts a database of sports statistics covering the four major North American sports leagues, the Women's National Basketball Association (WNBA), NCAA Division I men's basketball, NCAA Division I Football Bowl Subdivision, the Big Five association football leagues in Europe, and various professional golf tours. == History == The company was founded by friends Adam Elmore and Eli Dawson in 2014. In email correspondence to the Springfield News-Leader, Elmore detailed that he and Dawson, fans of the National Basketball Association (NBA), were compelled to create StatMuse after they realized there was no online platform where they could search "Lebron James most points" [sic] and quickly get a result "showing his highest scoring games." As a startup, the company's goal was to utilize a type of artificial intelligence called natural language processing (NLP) for sports. In 2015, the company was part of the second group of startups accepted into the Disney Accelerator program. The company secured support from several investors, including The Walt Disney Company, Techstars, Allen & Company, the NFL Players Association, Greycroft and NBA Commissioner David Stern. As part of their partnership with Disney, StatMuse signed a content deal with ESPN (owned by Disney) to provide stats content on social media and television during the 2015–16 NBA season. Initially, the company only had stats available for the NBA, but eventually expanded to provide stats for the other major North American sports leagues. The company's initial demographic was players of fantasy sports, but it eventually expanded to target general sports fans as well. StatMuse offers responses to user queries in the voices of sports-related public figures. Dawson shared with VentureBeat that StatMuse brings people in and records them saying different words and phrases. These celebrity voices were made accessible through Google's Google Assistant service, Microsoft's Cortana virtual assistant, and Amazon's Echo devices. The company launched its phone app in September 2017. The app allows users to access StatMuse's sports statistics database by submitting queries in their natural language. Upon the launch of the phone app, Fitz Tepper of TechCrunch wrote that: "The technology isn't perfect – some of the pauses between words are a bit awkward, making it clear that some phrases are being stitched together on the fly. But this is the exception, and on the whole, most responses sound pretty good." StatMuse plug-ins for Slack and Facebook Messenger were also made, providing text-based sports stats. In 2019, StatMuse received investment from the Google Assistant Investment program. The service launched a premium option dubbed StatMuse+ in May 2023, offering options that had previously been included for free, such as unlimited searches and full results in data tables. The premium version also included early access to new features and a personalized search history, as well as not having ads. The app received a variety of feedback. In January 2024, the service launched a Premier League version of the website dubbed StatMuse FC. It is planned to introduce more leagues on the website.

  Read more →
• 

  Neural style transfer

  Neural style transfer (NST) software algorithms are able to manipulate digital images, or videos, in order to adopt the appearance or visual style of another image. NST algorithms are characterized by their use of deep neural networks for the sake of image transformation. Common uses for NST are the creation of artificial artwork from photographs, for example by transferring the appearance of famous paintings to user-supplied photographs. Several notable mobile apps use NST techniques for this purpose, including DeepArt and Prisma. This method has been used by artists and designers around the globe to develop new artwork based on existent style(s). == History == NST is an example of image stylization, a problem studied for over two decades within the field of non-photorealistic rendering. The first two example-based style transfer algorithms were image analogies and image quilting. Both of these methods were based on patch-based texture synthesis algorithms. Given a training pair of images–a photo and an artwork depicting that photo–a transformation could be learned and then applied to create new artwork from a new photo, by analogy. If no training photo was available, it would need to be produced by processing the input artwork; image quilting did not require this processing step, though it was demonstrated on only one style. NST was first published in the paper "A Neural Algorithm of Artistic Style" by Leon Gatys et al., originally released to ArXiv 2015, and subsequently accepted by the peer-reviewed CVPR conference in 2016. The original paper used a VGG-19 architecture that has been pre-trained to perform object recognition using the ImageNet dataset. In 2017, Google AI introduced a method that allows a single deep convolutional style transfer network to learn multiple styles at the same time. This algorithm permits style interpolation in real-time, even when done on video media. == Mathematics == This section closely follows the original paper. === Overview === The idea of Neural Style Transfer (NST) is to take two images—a content image p → {\displaystyle {\vec {p}}} and a style image a → {\displaystyle {\vec {a}}} —and generate a third image x → {\displaystyle {\vec {x}}} that minimizes a weighted combination of two loss functions: a content loss L content ( p → , x → ) {\displaystyle {\mathcal {L}}_{\text{content }}({\vec {p}},{\vec {x}})} and a style loss L style ( a → , x → ) {\displaystyle {\mathcal {L}}_{\text{style }}({\vec {a}},{\vec {x}})} . The total loss is a linear sum of the two: L NST ( p → , a → , x → ) = α L content ( p → , x → ) + β L style ( a → , x → ) {\displaystyle {\mathcal {L}}_{\text{NST}}({\vec {p}},{\vec {a}},{\vec {x}})=\alpha {\mathcal {L}}_{\text{content}}({\vec {p}},{\vec {x}})+\beta {\mathcal {L}}_{\text{style}}({\vec {a}},{\vec {x}})} By jointly minimizing the content and style losses, NST generates an image that blends the content of the content image with the style of the style image. Both the content loss and the style loss measures the similarity of two images. The content similarity is the weighted sum of squared-differences between the neural activations of a single convolutional neural network (CNN) on two images. The style similarity is the weighted sum of Gram matrices within each layer (see below for details). The original paper used a VGG-19 CNN, but the method works for any CNN. === Symbols === Let x → {\textstyle {\vec {x}}} be an image input to a CNN. Let F l ∈ R N l × M l {\textstyle F^{l}\in \mathbb {R} ^{N_{l}\times M_{l}}} be the matrix of filter responses in layer l {\textstyle l} to the image x → {\textstyle {\vec {x}}} , where: N l {\textstyle N_{l}} is the number of filters in layer l {\textstyle l} ; M l {\textstyle M_{l}} is the height times the width (i.e. number of pixels) of each filter in layer l {\textstyle l} ; F i j l ( x → ) {\textstyle F_{ij}^{l}({\vec {x}})} is the activation of the i th {\textstyle i^{\text{th}}} filter at position j {\textstyle j} in layer l {\textstyle l} . A given input image x → {\textstyle {\vec {x}}} is encoded in each layer of the CNN by the filter responses to that image, with higher layers encoding more global features, but losing details on local features. === Content loss === Let p → {\textstyle {\vec {p}}} be an original image. Let x → {\textstyle {\vec {x}}} be an image that is generated to match the content of p → {\textstyle {\vec {p}}} . Let P l {\textstyle P^{l}} be the matrix of filter responses in layer l {\textstyle l} to the image p → {\textstyle {\vec {p}}} . The content loss is defined as the squared-error loss between the feature representations of the generated image and the content image at a chosen layer l {\displaystyle l} of a CNN: L content ( p → , x → , l ) = 1 2 ∑ i , j ( A i j l ( x → ) − A i j l ( p → ) ) 2 {\displaystyle {\mathcal {L}}_{\text{content }}({\vec {p}},{\vec {x}},l)={\frac {1}{2}}\sum _{i,j}\left(A_{ij}^{l}({\vec {x}})-A_{ij}^{l}({\vec {p}})\right)^{2}} where A i j l ( x → ) {\displaystyle A_{ij}^{l}({\vec {x}})} and A i j l ( p → ) {\displaystyle A_{ij}^{l}({\vec {p}})} are the activations of the i th {\displaystyle i^{\text{th}}} filter at position j {\displaystyle j} in layer l {\displaystyle l} for the generated and content images, respectively. Minimizing this loss encourages the generated image to have similar content to the content image, as captured by the feature activations in the chosen layer. The total content loss is a linear sum of the content losses of each layer: L content ( p → , x → ) = ∑ l v l L content ( p → , x → , l ) {\displaystyle {\mathcal {L}}_{\text{content }}({\vec {p}},{\vec {x}})=\sum _{l}v_{l}{\mathcal {L}}_{\text{content }}({\vec {p}},{\vec {x}},l)} , where the v l {\displaystyle v_{l}} are positive real numbers chosen as hyperparameters. === Style loss === The style loss is based on the Gram matrices of the generated and style images, which capture the correlations between different filter responses at different layers of the CNN: L style ( a → , x → ) = ∑ l = 0 L w l E l , {\displaystyle {\mathcal {L}}_{\text{style }}({\vec {a}},{\vec {x}})=\sum _{l=0}^{L}w_{l}E_{l},} where E l = 1 4 N l 2 M l 2 ∑ i , j ( G i j l ( x → ) − G i j l ( a → ) ) 2 . {\displaystyle E_{l}={\frac {1}{4N_{l}^{2}M_{l}^{2}}}\sum _{i,j}\left(G_{ij}^{l}({\vec {x}})-G_{ij}^{l}({\vec {a}})\right)^{2}.} Here, G i j l ( x → ) {\displaystyle G_{ij}^{l}({\vec {x}})} and G i j l ( a → ) {\displaystyle G_{ij}^{l}({\vec {a}})} are the entries of the Gram matrices for the generated and style images at layer l {\displaystyle l} . Explicitly, G i j l ( x → ) = ∑ k F i k l ( x → ) F j k l ( x → ) {\displaystyle G_{ij}^{l}({\vec {x}})=\sum _{k}F_{ik}^{l}({\vec {x}})F_{jk}^{l}({\vec {x}})} Minimizing this loss encourages the generated image to have similar style characteristics to the style image, as captured by the correlations between feature responses in each layer. The idea is that activation pattern correlations between filters in a single layer captures the "style" on the order of the receptive fields at that layer. Similarly to the previous case, the w l {\displaystyle w_{l}} are positive real numbers chosen as hyperparameters. === Hyperparameters === In the original paper, they used a particular choice of hyperparameters. The style loss is computed by w l = 0.2 {\displaystyle w_{l}=0.2} for the outputs of layers conv1_1, conv2_1, conv3_1, conv4_1, conv5_1 in the VGG-19 network, and zero otherwise. The content loss is computed by w l = 1 {\displaystyle w_{l}=1} for conv4_2, and zero otherwise. The ratio α / β ∈ [ 5 , 50 ] × 10 − 4 {\displaystyle \alpha /\beta \in [5,50]\times 10^{-4}} . === Training === Image x → {\displaystyle {\vec {x}}} is initially approximated by adding a small amount of white noise to input image p → {\displaystyle {\vec {p}}} and feeding it through the CNN. Then we successively backpropagate this loss through the network with the CNN weights fixed in order to update the pixels of x → {\displaystyle {\vec {x}}} . After several thousand epochs of training, an x → {\displaystyle {\vec {x}}} (hopefully) emerges that matches the style of a → {\displaystyle {\vec {a}}} and the content of p → {\displaystyle {\vec {p}}} . As of 2017, when implemented on a GPU, it takes a few minutes to converge. == Extensions == In some practical implementations, it is noted that the resulting image has too much high-frequency artifact, which can be suppressed by adding the total variation to the total loss. Compared to VGGNet, AlexNet does not work well for neural style transfer. NST has also been extended to videos. Subsequent work improved the speed of NST for images by using special-purpose normalizations. In a paper by Fei-Fei Li et al. adopted a different regularized loss metric and accelerated method for training to produce results in real-time (three orders of magnitude faster than Gatys). Their idea was to use not the pixel-based loss defined above but rather a 'perceptual loss' measuring t

  Read more →
• 

  Convolutional layer

  In artificial neural networks, a convolutional layer is a type of network layer that applies a convolution operation to the input. Convolutional layers are some of the primary building blocks of convolutional neural networks (CNNs), a class of neural network most commonly applied to images, video, audio, and other data that have the property of uniform translational symmetry. The convolution operation in a convolutional layer involves sliding a small window (called a kernel or filter) across the input data and computing the dot product between the values in the kernel and the input at each position. This process creates a feature map that represents detected features in the input. == Concepts == === Kernel === Kernels, also known as filters, are small matrices of weights that are learned during the training process. Each kernel is responsible for detecting a specific feature in the input data. The size of the kernel is a hyperparameter that affects the network's behavior. === Convolution === For a 2D input x {\displaystyle x} and a 2D kernel w {\displaystyle w} , the 2D convolution operation can be expressed as: y [ i , j ] = ∑ m = 0 k h − 1 ∑ n = 0 k w − 1 x [ i + m , j + n ] ⋅ w [ m , n ] {\displaystyle y[i,j]=\sum _{m=0}^{k_{h}-1}\sum _{n=0}^{k_{w}-1}x[i+m,j+n]\cdot w[m,n]} where k h {\displaystyle k_{h}} and k w {\displaystyle k_{w}} are the height and width of the kernel, respectively. This generalizes immediately to nD convolutions. Commonly used convolutions are 1D (for audio and text), 2D (for images), and 3D (for spatial objects, and videos). === Stride === Stride determines how the kernel moves across the input data. A stride of 1 means the kernel shifts by one pixel at a time, while a larger stride (e.g., 2 or 3) results in less overlap between convolutions and produces smaller output feature maps. === Padding === Padding involves adding extra pixels around the edges of the input data. It serves two main purposes: Preserving spatial dimensions: Without padding, each convolution reduces the size of the feature map. Handling border pixels: Padding ensures that border pixels are given equal importance in the convolution process. Common padding strategies include: No padding/valid padding. This strategy typically causes the output to shrink. Same padding: Any method that ensures the output size same as input size is a same padding strategy. Full padding: Any method that ensures each input entry is convolved over for the same number of times is a full padding strategy. Common padding algorithms include: Zero padding: Add zero entries to the borders of input. Mirror/reflect/symmetric padding: Reflect the input array on the border. Circular padding: Cycle the input array back to the opposite border, like a torus. The exact numbers used in convolutions is complicated, for which we refer to (Dumoulin and Visin, 2018) for details. == Variants == === Standard === The basic form of convolution as described above, where each kernel is applied to the entire input volume. === Depthwise separable === Depthwise separable convolution separates the standard convolution into two steps: depthwise convolution and pointwise convolution. The depthwise separable convolution decomposes a single standard convolution into two convolutions: a depthwise convolution that filters each input channel independently and a pointwise convolution ( 1 × 1 {\displaystyle 1\times 1} convolution) that combines the outputs of the depthwise convolution. This factorization significantly reduces computational cost. It was first developed by Laurent Sifre during an internship at Google Brain in 2013 as an architectural variation on AlexNet to improve convergence speed and model size. === Dilated === Dilated convolution, or atrous convolution, introduces gaps between kernel elements, allowing the network to capture a larger receptive field without increasing the kernel size. === Transposed === Transposed convolution, also known as deconvolution, fractionally strided convolution, and upsampling convolution, is a convolution where the output tensor is larger than its input tensor. It's often used in encoder-decoder architectures for upsampling. It's used in image generation, semantic segmentation, and super-resolution tasks. == History == The concept of convolution in neural networks was inspired by the visual cortex in biological brains. Early work by Hubel and Wiesel in the 1960s on the cat's visual system laid the groundwork for artificial convolution networks. An early convolution neural network was developed by Kunihiko Fukushima in 1969. It had mostly hand-designed kernels inspired by convolutions in mammalian vision. In 1979 he improved it to the Neocognitron, which learns all convolutional kernels by unsupervised learning (in his terminology, "self-organized by 'learning without a teacher'"). During the 1988 to 1998 period, a series of CNN were introduced by Yann LeCun et al., ending with LeNet-5 in 1998. It was an early influential CNN architecture for handwritten digit recognition, trained on the MNIST dataset, and was used in ATM. (Olshausen & Field, 1996) discovered that simple cells in the mammalian primary visual cortex implement localized, oriented, bandpass receptive fields, which could be recreated by fitting sparse linear codes for natural scenes. This was later found to also occur in the lowest-level kernels of trained CNNs. The field saw a resurgence in the 2010s with the development of deeper architectures and the availability of large datasets and powerful GPUs. AlexNet, developed by Alex Krizhevsky et al. in 2012, was a catalytic event in modern deep learning. In that year’s ImageNet competition, the AlexNet model achieved a 16% top-five error rate, significantly outperforming the next best entry, which had a 26% error rate. The network used eight trainable layers, approximately 650,000 neurons, and around 60 million parameters, highlighting the impact of deeper architectures and GPU acceleration on image recognition performance. From the 2013 ImageNet competition, most entries adopted deep convolutional neural networks, building on the success of AlexNet. Over the following years, performance steadily improved, with the top-five error rate falling from 16% in 2012 and 12% in 2013 to below 3% by 2017, as networks grew increasingly deep.

  Read more →
• 

  List of artificial intelligence journals

  This is a list of notable peer-reviewed academic journals that publish research in the field of artificial intelligence (AI), including areas such as machine learning, computer vision, natural language processing, robotics, and intelligent systems. == General artificial intelligence == Artificial Intelligence (journal) – Elsevier Journal of Artificial Intelligence Research (JAIR) – AI Access Foundation Knowledge-Based Systems – Elsevier == Machine learning == Data Mining and Knowledge Discovery – Springer Machine Learning (journal) – Springer Journal of Machine Learning Research – Microtome Pattern Recognition (journal) – Elsevier Neural Networks (journal) – Elsevier Neural Computation (journal) – MIT Press Neurocomputing (journal) - Elsevier == Deep learning and neural computation == IEEE Transactions on Evolutionary Computation – IEEE IEEE Transactions on Neural Networks and Learning Systems – IEEE Nature Machine Intelligence – Springer Nature == Computer vision == International Journal of Computer Vision – Springer IEEE Transactions on Pattern Analysis and Machine Intelligence – IEEE Machine Vision and Applications – Springer == Natural language processing == Computational Linguistics (journal) – MIT Press Natural Language Processing Transactions of the Association for Computational Linguistics – ACL == Robotics and intelligent systems == IEEE Transactions on Robotics – IEEE Autonomous Robots – Springer Journal of Intelligent & Robotic Systems – Springer == Interdisciplinary and ethics in AI == AI & Society – Springer Artificial Life – MIT Press Philosophy & Technology – Springer Minds and Machines – Springer

  Read more →
• 

  Machine translation software usability

  The sections below give objective criteria for evaluating the usability of machine translation software output. == Stationarity or canonical form == Do repeated translations converge on a single expression in both languages? I.e. does the translation method show stationarity or produce a canonical form? Does the translation become stationary without losing the original meaning? This metric has been criticized as not being well correlated with BLEU (BiLingual Evaluation Understudy) scores. == Adaptive to colloquialism, argot or slang == Is the system adaptive to colloquialism, argot or slang? The French language has many rules for creating words in the speech and writing of popular culture. Two such rules are: (a) The reverse spelling of words such as femme to meuf. (This is called verlan.) (b) The attachment of the suffix -ard to a noun or verb to form a proper noun. For example, the noun faluche means "student hat". The word faluchard formed from faluche colloquially can mean, depending on context, "a group of students", "a gathering of students" and "behavior typical of a student". The Google translator as of 28 December 2006 doesn't derive the constructed words as for example from rule (b), as shown here: Il y a une chorale falucharde mercredi, venez nombreux, les faluchards chantent des paillardes! ==> There is a choral society falucharde Wednesday, come many, the faluchards sing loose-living women! French argot has three levels of usage: familier or friendly, acceptable among friends, family and peers but not at work grossier or swear words, acceptable among friends and peers but not at work or in family verlan or ghetto slang, acceptable among lower classes but not among middle or upper classes The United States National Institute of Standards and Technology conducts annual evaluations [1] Archived 2009-03-22 at the Wayback Machine of machine translation systems based on the BLEU-4 criterion [2]. A combined method called IQmt which incorporates BLEU and additional metrics NIST, GTM, ROUGE and METEOR has been implemented by Gimenez and Amigo [3]. == Well-formed output == Is the output grammatical or well-formed in the target language? Using an interlingua should be helpful in this regard, because with a fixed interlingua one should be able to write a grammatical mapping to the target language from the interlingua. Consider the following Arabic language input and English language translation result from the Google translator as of 27 December 2006 [4]. This Google translator output doesn't parse using a reasonable English grammar: وعن حوادث التدافع عند شعيرة رمي الجمرات -التي كثيرا ما يسقط فيها العديد من الضحايا- أشار الأمير نايف إلى إدخال "تحسينات كثيرة في جسر الجمرات ستمنع بإذن الله حدوث أي تزاحم". ==> And incidents at the push Carbuncles-throwing ritual, which often fall where many of the victims - Prince Nayef pointed to the introduction of "many improvements in bridge Carbuncles God would stop the occurrence of any competing." == Semantics preservation == Do repeated re-translations preserve the semantics of the original sentence? For example, consider the following English input passed multiple times into and out of French using the Google translator as of 27 December 2006: Better a day earlier than a day late. ==> Améliorer un jour plus tôt qu'un jour tard. ==> To improve one day earlier than a day late. ==> Pour améliorer un jour plus tôt qu'un jour tard. ==> To improve one day earlier than a day late. As noted above and in, this kind of round-trip translation is a very unreliable method of evaluation. == Trustworthiness and security == An interesting peculiarity of Google Translate as of 24 January 2008 (corrected as of 25 January 2008) is the following result when translating from English to Spanish, which shows an embedded joke in the English-Spanish dictionary which has some added poignancy given recent events: Heath Ledger is dead ==> Tom Cruise está muerto This raises the issue of trustworthiness when relying on a machine translation system embedded in a Life-critical system in which the translation system has input to a Safety Critical Decision Making process. Conjointly it raises the issue of whether in a given use the software of the machine translation system is safe from hackers. It is not known whether this feature of Google Translate was the result of a joke/hack or perhaps an unintended consequence of the use of a method such as statistical machine translation. Reporters from CNET Networks asked Google for an explanation on January 24, 2008; Google said only that it was an "internal issue with Google Translate". The mistranslation was the subject of much hilarity and speculation on the Internet. If it is an unintended consequence of the use of a method such as statistical machine translation, and not a joke/hack, then this event is a demonstration of a potential source of critical unreliability in the statistical machine translation method. In human translations, in particular on the part of interpreters, selectivity on the part of the translator in performing a translation is often commented on when one of the two parties being served by the interpreter knows both languages. This leads to the issue of whether a particular translation could be considered verifiable. In this case, a converging round-trip translation would be a kind of verification.

  Read more →
• 

  Bottlenose (company)

  Bottlenose.com, also known as Bottlenose, is an enterprise trend intelligence company that analyzes big data and business data to detect trends for brands. It helps Fortune 500 enterprises discover, and track emerging trends that affect their brands. The company uses natural language processing, sentiment analysis, statistical algorithms, data mining, and machine learning heuristics to determine trends, and has a search engine that gathers information from social networks. KPMG Capital has invested a "substantial amount" in the company. Bottlenose processed 72 billion messages per day, in real-time, from across social and broadcast media, as of December 2014. == History == The company is based in Los Angeles, CA. Bottlenose is a real-time trend intelligence tool that measures social media campaigns and trends. The company also provides a free version of its Sonar tool that shows real-time trends across social media. In October 2012, the company received $1 million of funding from ff Venture Capital and Prosper Capital. By 2014, the company raised about $7 million in funding. In December 2014, KPMG Capital announced further investment in the company. In February 2015, the company confirmed it had raised $13.4 million in Series B funding led by KPMG Capital. Bottlenose partnered with the nonprofit No Labels during the 2014 State of the Union Address to analyze Twitter conversations for bipartisanship. The company also partnered with media monitoring company Critical Mention to analyze broadcast analytics. The Bottlenose Nerve Center integrated with the Critical Mention API to analyze real-time trends in television and radio broadcasts. In June 2014, Bottlenose updated its trend detection product to Nerve Center 2.0. It creates a newsfeed to show changes in trends and sends alerts when trends occur. It also has "emotion detection," which will display the emotions associated with specific comments on trending topics. In 2016, Bottlenose released its Nerve Center 3.0 platform, which was designed to automate the work of data scientists and lower the cost of artificial intelligence for businesses.

  Read more →
• 

  Amazon Q

  Amazon Q is a chatbot developed by Amazon for enterprise use. Based on both Amazon Titan and GPT-5, it was announced on November 28, 2023. At launch, it was a part of the Amazon Web Services management console. Amazon CodeWhisperer is a part of Amazon Q Developer, a part of Amazon Q. == History == Amazon's business-focused chatbot Q was announced on November 28, 2023 in a preview, with a full version available at $20 per person per month. On July 19, 2025, the Amazon Q Visual Studio Code extension was compromised to delete the user's home directory. The issue was fixed on July 21. == Capabilities == Q can be prompted to summarize long documents and group chats, create charts, data analysis and write code. Q is also capable of accessing non-Amazon services. The chatbot is based on Amazon Titan and GPT-5, and uses the Amazon Bedrock repository of foundational models. It is part of the Amazon Web Services management console.

  Read more →
• 

  Content Threat Removal

  Content Threat Removal (CTR) is a cybersecurity technology intended to defeat the threat posed by handling digital content in the cyberspace. Unlike other defenses, including antivirus software and sandboxed execution, CTR does not rely on being able to detect threats. Similar to Content Disarm and Reconstruction, CTR is designed to remove the threat without knowing whether it has done so and acts without knowing if data contains a threat or not. Detection strategies work by detecting unsafe content, and then blocking or removing that content. Content that is deemed safe is delivered to its destination. In contrast, Content Threat Removal assumes all data is hostile and delivers none of it to the destination, regardless of whether it is actually hostile. Although no data is delivered, the business information carried by the data is delivered using new data created for the purpose. == Threat == Advanced attacks continuously defeat defenses that are based on detection. These are often referred to as zero-day attacks, because as soon as they are discovered attack detection mechanisms must be updated to identify and neutralize the attack, and until they are, all systems are unprotected. These attacks succeed because attackers find new ways of evading detection. Polymorphic code can be used to evade the detection of known unsafe data and sandbox detection allows attacks to evade dynamic analysis. == Method == A Content Threat Removal defence works by intercepting data on its way to its destination. The business information carried by the data is extracted and the data is discarded. Then entirely new, clean and safe data is built to carry the information to its destination. The effect of building new data to carry the business information is that any unsafe elements of the original data are left behind and discarded. This includes executable data, macros, scripts and malformed data that trigger vulnerabilities in applications. While CTR is a form of content transformation, not all transformations provide a complete defence against the content threat. == Applicability == CTR is applicable to user-to-user traffic, such as email and chat, and machine-to-machine traffic, such as web services. Data transfers can be intercepted by in-line application layer proxies and these can transform the way information content is delivered to remove any threat. CTR works by extracting business information from data and it is not possible to extract information from executable code. This means CTR is not directly applicable to web browsing, since most web pages are code. It can, however, be applied to content that is downloaded from, and uploaded to, websites. Although most web pages cannot be transformed to render them safe, web browsing can be isolated and the remote access protocols used to reach the isolated environment can be subjected to CTR. CTR provides a solution to the problem of stegware. It naturally removes detectable steganography and eliminates symbiotic and permutation steganography through normalisation.

  Read more →
• 

  Weak supervision

  Weak supervision (also known as semi-supervised learning) is a paradigm in machine learning, the relevance and notability of which increased with the advent of large language models due to the large amount of data required to train them. It is characterized by using a combination of a small amount of human-labeled data (exclusively used in more expensive and time-consuming supervised learning paradigm), followed by a large amount of unlabeled data (used exclusively in unsupervised learning paradigm). In other words, the desired output values are provided only for a subset of the training data. The remaining data is unlabeled or imprecisely labeled. Intuitively, it can be seen as an exam and labeled data as sample problems that the teacher solves for the class as an aid in solving another set of problems. In the transductive setting, these unsolved problems act as exam questions. In the inductive setting, they become practice problems of the sort that will make up the exam. == Problem == The acquisition of labeled data for a learning problem often requires a skilled human agent (e.g. to transcribe an audio segment) or a physical experiment (e.g. determining the 3D structure of a protein or determining whether there is oil at a particular location). The cost associated with the labeling process thus may render large, fully labeled training sets infeasible, whereas acquisition of unlabeled data is relatively inexpensive. In such situations, semi-supervised learning can be of great practical value. Semi-supervised learning is also of theoretical interest in machine learning and as a model for human learning. == Technique == More formally, semi-supervised learning assumes a set of l {\displaystyle l} independently identically distributed examples x 1 , … , x l ∈ X {\displaystyle x_{1},\dots ,x_{l}\in X} with corresponding labels y 1 , … , y l ∈ Y {\displaystyle y_{1},\dots ,y_{l}\in Y} and u {\displaystyle u} unlabeled examples x l + 1 , … , x l + u ∈ X {\displaystyle x_{l+1},\dots ,x_{l+u}\in X} are processed. Semi-supervised learning combines this information to surpass the classification performance that can be obtained either by discarding the unlabeled data and doing supervised learning or by discarding the labels and doing unsupervised learning. Semi-supervised learning may refer to either transductive learning or inductive learning. The goal of transductive learning is to infer the correct labels for the given unlabeled data x l + 1 , … , x l + u {\displaystyle x_{l+1},\dots ,x_{l+u}} only. The goal of inductive learning is to infer the correct mapping from X {\displaystyle X} to Y {\displaystyle Y} . It is unnecessary (and, according to Vapnik's principle, imprudent) to perform transductive learning by way of inferring a classification rule over the entire input space; however, in practice, algorithms formally designed for transduction or induction are often used interchangeably. == Assumptions == In order to make any use of unlabeled data, some relationship to the underlying distribution of data must exist. Semi-supervised learning algorithms make use of at least one of the following assumptions: === Continuity / smoothness assumption === Points that are close to each other are more likely to share a label. This is also generally assumed in supervised learning and yields a preference for geometrically simple decision boundaries. In the case of semi-supervised learning, the smoothness assumption additionally yields a preference for decision boundaries in low-density regions, so few points are close to each other but in different classes. === Cluster assumption === The data tend to form discrete clusters, and points in the same cluster are more likely to share a label (although data that shares a label may spread across multiple clusters). This is a special case of the smoothness assumption and gives rise to feature learning with clustering algorithms. === Manifold assumption === The data lie approximately on a manifold of much lower dimension than the input space. In this case learning the manifold using both the labeled and unlabeled data can avoid the curse of dimensionality. Then learning can proceed using distances and densities defined on the manifold. The manifold assumption is practical when high-dimensional data are generated by some process that may be hard to model directly, but which has only a few degrees of freedom. For instance, human voice is controlled by a few vocal folds, and images of various facial expressions are controlled by a few muscles. In these cases, it is better to consider distances and smoothness in the natural space of the generating problem, rather than in the space of all possible acoustic waves or images, respectively. == History == The heuristic approach of self-training (also known as self-learning or self-labeling) is historically the oldest approach to semi-supervised learning, with examples of applications starting in the 1960s. The transductive learning framework was formally introduced by Vladimir Vapnik in the 1970s. Interest in inductive learning using generative models also began in the 1970s. A probably approximately correct learning bound for semi-supervised learning of a Gaussian mixture was demonstrated by Ratsaby and Venkatesh in 1995. == Methods == === Generative models === Generative approaches to statistical learning first seek to estimate p ( x | y ) {\displaystyle p(x|y)} , the distribution of data points belonging to each class. The probability p ( y | x ) {\displaystyle p(y|x)} that a given point x {\displaystyle x} has label y {\displaystyle y} is then proportional to p ( x | y ) p ( y ) {\displaystyle p(x|y)p(y)} by Bayes' rule. Semi-supervised learning with generative models can be viewed either as an extension of supervised learning (classification plus information about p ( x ) {\displaystyle p(x)} ) or as an extension of unsupervised learning (clustering plus some labels). Generative models assume that the distributions take some particular form p ( x | y , θ ) {\displaystyle p(x|y,\theta )} parameterized by the vector θ {\displaystyle \theta } . If these assumptions are incorrect, the unlabeled data may actually decrease the accuracy of the solution relative to what would have been obtained from labeled data alone. However, if the assumptions are correct, then the unlabeled data necessarily improves performance. The unlabeled data are distributed according to a mixture of individual-class distributions. In order to learn the mixture distribution from the unlabeled data, it must be identifiable, that is, different parameters must yield different summed distributions. Gaussian mixture distributions are identifiable and commonly used for generative models. The parameterized joint distribution can be written as p ( x , y | θ ) = p ( y | θ ) p ( x | y , θ ) {\displaystyle p(x,y|\theta )=p(y|\theta )p(x|y,\theta )} by using the chain rule. Each parameter vector θ {\displaystyle \theta } is associated with a decision function f θ ( x ) = argmax y p ( y | x , θ ) {\displaystyle f_{\theta }(x)={\underset {y}{\operatorname {argmax} }}\ p(y|x,\theta )} . The parameter is then chosen based on fit to both the labeled and unlabeled data, weighted by λ {\displaystyle \lambda } : argmax Θ ( log ⁡ p ( { x i , y i } i = 1 l | θ ) + λ log ⁡ p ( { x i } i = l + 1 l + u | θ ) ) {\displaystyle {\underset {\Theta }{\operatorname {argmax} }}\left(\log p(\{x_{i},y_{i}\}_{i=1}^{l}|\theta )+\lambda \log p(\{x_{i}\}_{i=l+1}^{l+u}|\theta )\right)} === Low-density separation === Another major class of methods attempts to place boundaries in regions with few data points (labeled or unlabeled). One of the most commonly used algorithms is the transductive support vector machine, or TSVM (which, despite its name, may be used for inductive learning as well). Whereas support vector machines for supervised learning seek a decision boundary with maximal margin over the labeled data, the goal of TSVM is a labeling of the unlabeled data such that the decision boundary has maximal margin over all of the data. In addition to the standard hinge loss ( 1 − y f ( x ) ) + {\displaystyle (1-yf(x))_{+}} for labeled data, a loss function ( 1 − | f ( x ) | ) + {\displaystyle (1-|f(x)|)_{+}} is introduced over the unlabeled data by letting y = sign ⁡ f ( x ) {\displaystyle y=\operatorname {sign} {f(x)}} . TSVM then selects f ∗ ( x ) = h ∗ ( x ) + b {\displaystyle f^{}(x)=h^{}(x)+b} from a reproducing kernel Hilbert space H {\displaystyle {\mathcal {H}}} by minimizing the regularized empirical risk: f ∗ = argmin f ( ∑ i = 1 l ( 1 − y i f ( x i ) ) + + λ 1 ‖ h ‖ H 2 + λ 2 ∑ i = l + 1 l + u ( 1 − | f ( x i ) | ) + ) {\displaystyle f^{}={\underset {f}{\operatorname {argmin} }}\left(\displaystyle \sum _{i=1}^{l}(1-y_{i}f(x_{i}))_{+}+\lambda _{1}\|h\|_{\mathcal {H}}^{2}+\lambda _{2}\sum _{i=l+1}^{l+u}(1-|f(x_{i})|)_{+}\right)} An exact solution is intractable due to the non-convex term ( 1 − | f ( x ) | ) + {\displayst

  Read more →
• 

  Huawei Mobile Services

  Huawei Mobile Services (HMS) is a collection of proprietary services and high level application programming interfaces (APIs) developed by Huawei Technologies Co., Ltd. Its hub known as HMS Core serves as a toolkit for app development on Huawei devices. HMS is typically installed on Huawei devices on top of running HarmonyOS 4.x and earlier operating system on its earlier devices running the Android operating system with EMUI including devices already distributed with Google Mobile Services. Alongside, HMS Core Wear Engine for Android phones with lightweight based LiteOS wearable middleware app framework integration connectivity like notifications, status etc. HMS consists of seven key services and the HMS Core. The key services are Huawei ID, Huawei Cloud, AppGallery, Themes, Huawei Video, Browser, and Assistant. The web browser is based on Chromium. Huawei Quick Apps is the alternative to Google Instant Apps. By January 2020, over 50,000 apps had been integrated with HMS Core. Its rival, Google Mobile Services has 3 million apps on Google's Play Store. The AppGallery claimed 180 billion downloads in 2019. In March 2020, HMS was used by 650 million monthly active users across 170 countries. A Chinese phone manufacturer, LeTV, hosted a smartphone business communication meeting in Beijing on September 27, 2021, to demonstrate its phone, the LeTV S1. This was the first smartphone from a third-party manufacturer to include Huawei Mobile Services (HMS). == HMS on Android and HarmonyOS == Huawei Mobile Services on Android goes all the way back to August 2016 as Huawei ID services for phones, basic functionalities for Huawei P9 series. However, in May 2019 proved to be a significant change to HMS when Google was prohibited from working with Huawei on any new devices extending ecosystem for AppGallery store front launched in April 2018, year prior. This also included bundling Google's Apps, including Gmail, Maps and YouTube. Any new Huawei devices launched after 16 May 2019 were unable to receive updates from Google services and would be considered 'uncertified' meaning Huawei's only solution at the time was to turn HMS into a genuine competitor to Google and incentivize app developers to utilize the platform. Huawei officially launched Huawei Mobile Services in China on December 24, 2019, as a beta. Huawei expanded Huawei Mobile Services in Europe in February 2020 and other markets in Asia, Latin America, Middle East & Africa, Canada, Mexico followed outside banned US market. HMS is available on the Honor 9X Pro, View 30 Pro, Huawei Mate XS. HMS is also available, alongside GMS, on many other Huawei models launched before the ban. Huawei promised developers it would take, “less than 10 minutes", to port their app over to HMS - to illustrate the ease of portability between Google's Play Store and the HMS AppGallery. On January 15, 2020, HMS Core 4.0 (Huawei Mobile Services Core 4.0) was officially launched. Huawei announced that at this time, there were already 1.3 million developers and 55,000 applications on board. The next day, Huawei held a developer day event in London and invested £20 million to encourage developers in the United Kingdom and Ireland to use HMS. On July 15, 2021, Huawei expanded HMS with classic HarmonyOS dual-framework that provided Java support and eventually with JavaScript and ArkTS (eTS) language support with HMS Core 6.0 for app development with primarily Android apps, alongside limited HAP imperative developed based apps that shares AOSP file system libraries in all types of devices from smartphones, tablets, smart screens, smartwatches, and car machines. Including various third-party development frameworks, such as React Native, Cordova, etc. At HDC 2023, Huawei unveiled HarmonyOS 5, marking a total break from the hybrid Android derived platform. This shift replaced the legacy Android and classic HarmonyOS-based HMS SDK with a full native API developer kit SDK built solely on OpenHarmony. The architecture moved from middleware services to vertical integration path. In this new model, HMS Core libraries are no longer external add-ons but are bundled directly into the system and DevEco Studio as native HarmonyOS Kits. == HMS Core == HMS Core is a hub for Huawei Mobile Services and serves as a toolkit for app development on Huawei devices. The core comprises Development, Growth and Monetizing and was created as a replacement for Google Mobile Services (GMS) Core. HMS core services were available in more than 55,000 apps in June 2020; HMS Core 5.0 debuted in September 2020. HMS Core 6.0 was launched in June 2021 with extended support for Huawei Cloud services. In June 2021, the number of registered developers within the HMS ecosystem was 4 million, and the number of apps integrated with the HMS Core had reached 134,000. As of July 2022, registered developers within HMS ecosystem had grown to 5 million, and the number of apps integrated with the HMS Core reached 203,000. The number of apps had grown to 220,000 by 30 September 2022. == AppGallery == The AppGallery has a key rival, Google's Play Store on Android. The AppGallery is available in 170 countries, across 78 languages. == Reception == The reception of HMS is mixed, with the majority of discussion based around the key Google/Android apps which are not yet present on the AppGallery and whether or not this presents a significant problem to users. The open development of HMS Core has been regarded by some as benefiting the Android project as a whole, "If Huawei continues to invest in a holistically open approach ... the result could be that we could all end up a bit less beholden to Google".

  Read more →