AI Generator Girl Image

AI Generator Girl Image — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Auto-defrost

  Auto-defrost, automatic defrost or self-defrosting is a technique which regularly defrosts the evaporator in a refrigerator or freezer. Appliances using this technique are often called frost free, frostless, or no-frost. == Mechanism == The defrost mechanism in a refrigerator heats the cooling element (evaporator coil) for a short period of time and melts the frost that has formed on it. The resulting water drains through a duct at the back of the unit. Defrosting is controlled by an electric or electronic timer. For every 6, 8, 10, 12 or 24 hours of compressor operation, it turns on a defrost heater for 15 minutes to half an hour. The defrost heater, having a typical power rating of 350W to 600W, is often mounted just below the evaporator in top and bottom-freezer models. It can also be located below and in the middle of the evaporator in side-by-side models. It may be protected from short circuits by means of fusible links. In older refrigerators, the timer runs continuously. In newer designs, the timer only runs while the compressor runs, so the longer the refrigerator door is closed, the less time the heater will run for and the more energy is saved. A defrost thermostat opens the heater circuit when the evaporator temperature rises above a preset temperature, 40°F (5°C) or more, thereby preventing excessive heating of the freezer compartment. The defrost timer is such that either the compressor or the defrost heater is on, but not both at the same time. Inside the freezer, air is circulated by means of one or more fans. In a typical design cold air from the freezer compartment is ducted to the fresh food compartment and circulated back into the freezer compartment. Air circulation helps sublimate any ice or frost that may form on frozen items in the freezer compartment. While defrosting, this fan is stopped to prevent heated-up air from reaching the food compartment. Instead of the normal cooling elements being embedded in the freezer liner, auto-defrost elements are behind or beneath the liner. This allows them to be heated for short periods of time to dispose of frost, without heating the contents of the freezer. Alternatively, some systems use the hot gas in the condenser to defrost the evaporator. This is done by means of a circuit that is cross-linked by a three-way valve. The hot gas quickly heats up the evaporator and defrosts it. This system is primarily used in commercial applications such as ice-cream displays. == Application == While this technique was originally applied to the refrigerator compartment, it was later used for freezer compartment as well. A combined refrigerator/freezer which applies self-defrosting to the refrigerator compartment only is usually called "partial frost free" or semi-automatic defrost (some brands call these "Auto Defrost" while Frigidaire referred to their semi-automatic models as "Cycla-Matic," Kelvinator often named these models as "Cyclic Defrost" ). These refrigerators usually have a pan underneath where water from the melted frost in the refrigerator section evaporates. Freezers with automatic defrosting and combined refrigerator/freezer units which also apply self defrosting to their freezer compartment are called "frost free". The latter usually feature an air connection between the two compartments with the air passage to the refrigerator compartment regulated by a damper. By this means, a controlled portion of the air coming from the freezer reaches the refrigerator. Some older models have no air circulation between their freezer and refrigerator sections. Instead, they use an independent cooling system (for example: an evaporator coil with a defrost heater and a circulating fan in the freezer and a cold-plate or open-coil evaporator in the refrigerator. "Frost-Free" refrigerator/freezer units usually use a heating element to defrost their evaporators, a pan to collect and evaporate water from the frost that melts from the cold plate and/or evaporator coil, a timer which turns off the compressor and turns on the defrost element usually from once to 4 times a day for periods usually ranging from 15 to 30 minutes, a defrost limiter thermostat that turns off the heating element before the temperature rises too much while the timer is still in its defrost phase. Some models also feature a drain heater to prevent ice from blocking the drain. Other early types of refrigerators also use hot gas defrost instead of electric heaters. These reverse the evaporator and condenser sides for the defrost cycle. Some newer refrigerator/freezer models have a computer that monitors how many times each door is opened and uses this data to control defrost scheduling thereby reducing power use. == Advantages == No need to manually defrost the frost buildup, therefore power consumption will not increase with time. Food packaging is easier to see. Most frozen food will not stick together. Smells are limited, especially in total frost-free appliances because the air always circulates. Better temperature management. == Disadvantages == The system can be more expensive to run when usage is high and if the fan continues or starts to run when the door is opened. A thermal cutout safety device is required to prevent overheating of the heating element. Increased electrical and mechanical complexity compared to a basic upright freezer or chest freezer, making it more prone to component failure. The temperature of the freezer contents rises during the defrosting cycles, especially if there is a light load in the freezer. This can cause "freezer burn" on articles placed in the freezer, from partially defrosting, then re-freezing On hot, humid days condensation will sometimes form around the refrigerator doors. Defrosting may not be completed by the time the defrost timer cycles back to normal operation (especially in hot, humid conditions with frequent door openings), leaving ice/frost on the evaporator coils. This condition can lead to "icing" which will interfere with the operation of the refrigerator. In laboratories, self-defrosting freezers must not be used to store certain delicate reagents such as enzymes, because the temperature cycling can degrade them. In addition, water can evaporate out of containers that do not have a very tight seal, altering the concentration of the reagents. Self-defrosting freezers should never be used to store flammable chemicals.

  Read more →
• 

  Cartesian genetic programming

  Cartesian genetic programming is a form of genetic programming that uses a graph representation to encode computer programs. It grew from a method of evolving digital circuits developed by Julian F. Miller and Peter Thomson in 1997. The term ‘Cartesian genetic programming’ first appeared in 1999 and was proposed as a general form of genetic programming in 2000. It is called ‘Cartesian’ because it represents a program using a two-dimensional grid of nodes. Miller's keynote explains how CGP works. He edited a book entitled Cartesian Genetic Programming, published in 2011 by Springer. The open source project dCGP implements a differentiable version of CGP developed at the European Space Agency by Dario Izzo, Francesco Biscani and Alessio Mereta able to approach symbolic regression tasks, to find solution to differential equations, find prime integrals of dynamical systems, represent variable topology artificial neural networks and more.

  Read more →
• 

  Rprop

  Rprop, short for resilient backpropagation, is a learning heuristic for supervised learning in feedforward artificial neural networks. This is a first-order optimization algorithm. This algorithm was created by Martin Riedmiller and Heinrich Braun in 1992. Similarly to the Manhattan update rule, Rprop takes into account only the sign of the partial derivative over all patterns (not the magnitude), and acts independently on each "weight". For each weight, if there was a sign change of the partial derivative of the total error function compared to the last iteration, the update value for that weight is multiplied by a factor η−, where η− < 1. If the last iteration produced the same sign, the update value is multiplied by a factor of η+, where η+ > 1. The update values are calculated for each weight in the above manner, and finally each weight is changed by its own update value, in the opposite direction of that weight's partial derivative, so as to minimise the total error function. η+ is empirically set to 1.2 and η− to 0.5. Rprop can result in very large weight increments or decrements if the gradients are large, which is a problem when using mini-batches as opposed to full batches. RMSprop addresses this problem by keeping the moving average of the squared gradients for each weight and dividing the gradient by the square root of the mean square. RPROP is a batch update algorithm. Next to the cascade correlation algorithm and the Levenberg–Marquardt algorithm, Rprop is one of the fastest weight update mechanisms. == Variations == Martin Riedmiller developed three algorithms, all named RPROP. Igel and Hüsken assigned names to them and added a new variant: RPROP+ is defined at A Direct Adaptive Method for Faster Backpropagation Learning: The RPROP Algorithm. RPROP− is defined at Advanced Supervised Learning in Multi-layer Perceptrons – From Backpropagation to Adaptive Learning Algorithms. Backtracking is removed from RPROP+. iRPROP− is defined in Rprop – Description and Implementation Details and was reinvented by Igel and Hüsken. This variant is very popular and most simple. iRPROP+ is defined at Improving the Rprop Learning Algorithm and is very robust and typically faster than the other three variants.

  Read more →
• 

  Inverted pendulum

  An inverted pendulum is a pendulum that has its center of mass above its pivot point. It is unstable and falls over without additional help. It can be suspended stably in this inverted position by using a control system to monitor the angle of the pole and move the pivot point horizontally back under the center of mass when it starts to fall over, keeping it balanced. The inverted pendulum is a classic problem in dynamics and control theory and is used as a benchmark for testing control strategies. It is often implemented with the pivot point mounted on a cart that can move horizontally under control of an electronic servo system as shown in the photo; this is called a cart and pole apparatus. Most applications limit the pendulum to 1 degree of freedom by affixing the pole to an axis of rotation. Whereas a normal pendulum is stable when hanging downward, an inverted pendulum is inherently unstable, and must be actively balanced in order to remain upright; this can be done either by applying a torque at the pivot point, by moving the pivot point horizontally as part of a feedback system, changing the rate of rotation of a mass mounted on the pendulum on an axis parallel to the pivot axis and thereby generating a net torque on the pendulum, or by oscillating the pivot point vertically. A simple demonstration of moving the pivot point in a feedback system is achieved by balancing an upturned broomstick on the end of one's finger. A second type of inverted pendulum is a tiltmeter for tall structures, which consists of a wire anchored to the bottom of the foundation and attached to a float in a pool of oil at the top of the structure that has devices for measuring movement of the neutral position of the float away from its original position. == Overview == A pendulum with its bob hanging directly below the support pivot is at a stable equilibrium point, where it remains motionless because there is no torque on the pendulum. If displaced from this position, it experiences a restoring torque that returns it toward the equilibrium position. A pendulum with its bob in an inverted position, supported on a rigid rod directly above the pivot, 180° from its stable equilibrium position, is at an unstable equilibrium point. At this point again there is no torque on the pendulum, but the slightest displacement away from this position causes a gravitation torque on the pendulum that accelerates it away from equilibrium, causing it to fall over. In order to stabilize a pendulum in this inverted position, a feedback control system can be used, which monitors the pendulum's angle and moves the position of the pivot point sideways when the pendulum starts to fall over, to keep it balanced. The inverted pendulum is a classic problem in dynamics and control theory and is widely used as a benchmark for testing control algorithms (PID controllers, state-space representation, neural networks, fuzzy control, genetic algorithms, etc.). Variations on this problem include multiple links, allowing the motion of the cart to be commanded while maintaining the pendulum, and balancing the cart-pendulum system on a see-saw. The inverted pendulum is related to rocket or missile guidance, where the center of gravity is located behind the center of drag causing aerodynamic instability. The understanding of a similar problem can be shown by simple robotics in the form of a balancing cart. Balancing an upturned broomstick on the end of one's finger is a simple demonstration, and the problem is solved by self-balancing personal transporters such as the Segway PT, the self-balancing hoverboard and the self-balancing unicycle. Another way that an inverted pendulum may be stabilized, without any feedback or control mechanism, is by oscillating the pivot rapidly up and down. This is called Kapitza's pendulum. If the oscillation is sufficiently strong (in terms of its acceleration and amplitude) then the inverted pendulum can recover from perturbations in a strikingly counterintuitive manner. If the driving point moves in simple harmonic motion, the pendulum's motion is described by the Mathieu equation. == Equations of motion == The equations of motion of inverted pendulums are dependent on what constraints are placed on the motion of the pendulum. Inverted pendulums can be created in various configurations resulting in a number of Equations of Motion describing the behavior of the pendulum. === Stationary pivot point === In a configuration where the pivot point of the pendulum is fixed in space, the equation of motion is similar to that for an uninverted pendulum. The equation of motion below assumes no friction or any other resistance to movement, a rigid massless rod, and the restriction to 2-dimensional movement. θ ¨ − g ℓ sin ⁡ θ = 0 {\displaystyle {\ddot {\theta }}-{g \over \ell }\sin \theta =0} Where θ ¨ {\displaystyle {\ddot {\theta }}} is the angular acceleration of the pendulum, g {\displaystyle g} is the standard gravity on the surface of the Earth, ℓ {\displaystyle \ell } is the length of the pendulum, and θ {\displaystyle \theta } is the angular displacement measured from the equilibrium position. When θ ¨ {\displaystyle {\ddot {\theta }}} added to both sides, it has the same sign as the angular acceleration term: θ ¨ = g ℓ sin ⁡ θ {\displaystyle {\ddot {\theta }}={g \over \ell }\sin \theta } Thus, the inverted pendulum accelerates away from the vertical unstable equilibrium in the direction initially displaced, and the acceleration is inversely proportional to the length. Tall pendulums fall more slowly than short ones. Derivation using torque and moment of inertia: The pendulum is assumed to consist of a point mass, of mass m {\displaystyle m} , affixed to the end of a massless rigid rod, of length ℓ {\displaystyle \ell } , attached to a pivot point at the end opposite the point mass. The net torque of the system must equal the moment of inertia times the angular acceleration: τ n e t = I θ ¨ {\displaystyle {\boldsymbol {\tau }}_{\mathrm {net} }=I{\ddot {\theta }}} The torque due to gravity providing the net torque: τ n e t = m g ℓ sin ⁡ θ {\displaystyle {\boldsymbol {\tau }}_{\mathrm {net} }=mg\ell \sin \theta \,\!} Where θ {\displaystyle \theta \ } is the angle measured from the inverted equilibrium position. The resulting equation: I θ ¨ = m g ℓ sin ⁡ θ {\displaystyle I{\ddot {\theta }}=mg\ell \sin \theta \,\!} The moment of inertia for a point mass: I = m R 2 {\displaystyle I=mR^{2}} In the case of the inverted pendulum the radius is the length of the rod, ℓ {\displaystyle \ell } . Substituting in I = m ℓ 2 {\displaystyle I=m\ell ^{2}} m ℓ 2 θ ¨ = m g ℓ sin ⁡ θ {\displaystyle m\ell ^{2}{\ddot {\theta }}=mg\ell \sin \theta \,\!} Mass and ℓ 2 {\displaystyle \ell ^{2}} is divided from each side resulting in: θ ¨ = g ℓ sin ⁡ θ {\displaystyle {\ddot {\theta }}={g \over \ell }\sin \theta } === Inverted pendulum on a cart === An inverted pendulum on a cart consists of a mass m {\displaystyle m} at the top of a pole of length ℓ {\displaystyle \ell } pivoted on a horizontally moving base as shown in the adjacent image. The cart is restricted to linear motion and is subject to forces resulting in or hindering motion. === Essentials of stabilization === The essentials of stabilizing the inverted pendulum can be summarized qualitatively in three steps. 1. If the tilt angle θ {\displaystyle \theta } is to the right, the cart must accelerate to the right and vice versa. 2. The position of the cart x {\displaystyle x} relative to track center is stabilized by slightly modulating the null angle (the angle error that the control system tries to null) by the position of the cart, that is, null angle = θ + k x {\displaystyle =\theta +kx} where k {\displaystyle k} is small. This makes the pole want to lean slightly toward track center and stabilize at track center where the tilt angle is exactly vertical. Any offset in the tilt sensor or track slope that would otherwise cause instability translates into a stable position offset. A further added offset gives position control. 3. A normal pendulum subject to a moving pivot point such as a load lifted by a crane, has a peaked response at the pendulum radian frequency of ω p = g / ℓ {\displaystyle \omega _{p}={\sqrt {g/\ell }}} . To prevent uncontrolled swinging, the frequency spectrum of the pivot motion should be suppressed near ω p {\displaystyle \omega _{p}} . The inverted pendulum requires the same suppression filter to achieve stability. As a consequence of the null angle modulation strategy, the position feedback is positive, that is, a sudden command to move right produces an initial cart motion to the left followed by a move right to rebalance the pendulum. The interaction of the pendulum instability and the positive position feedback instability to produce a stable system is a feature that makes the mathematical analysis an interesting and challenging problem. === From Lagrange's equations === The equations of motion c

  Read more →
• 

  Sentence extraction

  Sentence extraction is a technique used for automatic summarization of a text. In this shallow approach, statistical heuristics are used to identify the most salient sentences of a text. Sentence extraction is a low-cost approach compared to more knowledge-intensive deeper approaches which require additional knowledge bases such as ontologies or linguistic knowledge. In short, sentence extraction works as a filter that allows only meaningful sentences to pass. The major downside of applying sentence-extraction techniques to the task of summarization is the loss of coherence in the resulting summary. Nevertheless, sentence extraction summaries can give valuable clues to the main points of a document and are frequently sufficiently intelligible to human readers. == Procedure == Usually, a combination of heuristics is used to determine the most important sentences within the document. Each heuristic assigns a (positive or negative) score to the sentence. After all heuristics have been applied, the highest-scoring sentences are included in the summary. The individual heuristics are weighted according to their importance. === Early approaches and some sample heuristics === Seminal papers which laid the foundations for many techniques used today have been published by Hans Peter Luhn in 1958 and H. P Edmundson in 1969. Luhn proposed to assign more weight to sentences at the beginning of the document or a paragraph. Edmundson stressed the importance of title-words for summarization and was the first to employ stop-lists in order to filter uninformative words of low semantic content (e.g. most grammatical words such as of, the, a). He also distinguished between bonus words and stigma words, i.e. words that probably occur together with important (e.g. the word form significant) or unimportant information. His idea of using key-words, i.e. words which occur significantly frequently in the document, is still one of the core heuristics of today's summarizers. With large linguistic corpora available today, the tf–idf value which originated in information retrieval, can be successfully applied to identify the key words of a text: If for example the word cat occurs significantly more often in the text to be summarized (TF = "term frequency") than in the corpus (IDF means "inverse document frequency"; here the corpus is meant by document), then cat is likely to be an important word of the text; the text may in fact be a text about cats.

  Read more →
• 

  Margin-infused relaxed algorithm

  Margin-infused relaxed algorithm (MIRA) is a machine learning and online algorithm for multiclass classification problems. It is designed to learn a set of parameters (vector or matrix) by processing all the given training examples one-by-one and updating the parameters according to each training example, so that the current training example is classified correctly with a margin against incorrect classifications at least as large as their loss. The change of the parameters is kept as small as possible. A two-class version called binary MIRA simplifies the algorithm by not requiring the solution of a quadratic programming problem (see below). When used in a one-vs-all configuration, binary MIRA can be extended to a multiclass learner that approximates full MIRA, but may be faster to train. The flow of the algorithm looks as follows: The update step is then formalized as a quadratic programming problem: Find m i n ‖ w ( i + 1 ) − w ( i ) ‖ {\displaystyle min\|w^{(i+1)}-w^{(i)}\|} , so that s c o r e ( x t , y t ) − s c o r e ( x t , y ′ ) ≥ L ( y t , y ′ ) ∀ y ′ {\displaystyle score(x_{t},y_{t})-score(x_{t},y')\geq L(y_{t},y')\ \forall y'} , i.e. the score of the current correct training y {\displaystyle y} must be greater than the score of any other possible y ′ {\displaystyle y'} by at least the loss (number of errors) of that y ′ {\displaystyle y'} in comparison to y {\displaystyle y} .

  Read more →
• 

  Modes of variation

  In statistics, modes of variation are a continuously indexed set of vectors or functions that are centered at a mean and are used to depict the variation in a population or sample. Typically, variation patterns in the data can be decomposed in descending order of eigenvalues with the directions represented by the corresponding eigenvectors or eigenfunctions. Modes of variation provide a visualization of this decomposition and an efficient description of variation around the mean. Both in principal component analysis (PCA) and in functional principal component analysis (FPCA), modes of variation play an important role in visualizing and describing the variation in the data contributed by each eigencomponent. In real-world applications, the eigencomponents and associated modes of variation aid to interpret complex data, especially in exploratory data analysis (EDA). == Formulation == Modes of variation are a natural extension of PCA and FPCA. === Modes of variation in PCA === If a random vector X = ( X 1 , X 2 , ⋯ , X p ) T {\displaystyle \mathbf {X} =(X_{1},X_{2},\cdots ,X_{p})^{T}} has the mean vector μ p {\displaystyle {\boldsymbol {\mu }}_{p}} , and the covariance matrix Σ p × p {\displaystyle \mathbf {\Sigma } _{p\times p}} with eigenvalues λ 1 ≥ λ 2 ≥ ⋯ ≥ λ p ≥ 0 {\displaystyle \lambda _{1}\geq \lambda _{2}\geq \cdots \geq \lambda _{p}\geq 0} and corresponding orthonormal eigenvectors e 1 , e 2 , ⋯ , e p {\displaystyle \mathbf {e} _{1},\mathbf {e} _{2},\cdots ,\mathbf {e} _{p}} , by eigendecomposition of a real symmetric matrix, the covariance matrix Σ {\displaystyle \mathbf {\Sigma } } can be decomposed as Σ = Q Λ Q T , {\displaystyle \mathbf {\Sigma } =\mathbf {Q} \mathbf {\Lambda } \mathbf {Q} ^{T},} where Q {\displaystyle \mathbf {Q} } is an orthogonal matrix whose columns are the eigenvectors of Σ {\displaystyle \mathbf {\Sigma } } , and Λ {\displaystyle \mathbf {\Lambda } } is a diagonal matrix whose entries are the eigenvalues of Σ {\displaystyle \mathbf {\Sigma } } . By the Karhunen–Loève expansion for random vectors, one can express the centered random vector in the eigenbasis X − μ = ∑ k = 1 p ξ k e k , {\displaystyle \mathbf {X} -{\boldsymbol {\mu }}=\sum _{k=1}^{p}\xi _{k}\mathbf {e} _{k},} where ξ k = e k T ( X − μ ) {\displaystyle \xi _{k}=\mathbf {e} _{k}^{T}(\mathbf {X} -{\boldsymbol {\mu }})} is the principal component associated with the k {\displaystyle k} -th eigenvector e k {\displaystyle \mathbf {e} _{k}} , with the properties E ⁡ ( ξ k ) = 0 , Var ⁡ ( ξ k ) = λ k , {\displaystyle \operatorname {E} (\xi _{k})=0,\operatorname {Var} (\xi _{k})=\lambda _{k},} and E ⁡ ( ξ k ξ l ) = 0 for l ≠ k . {\displaystyle \operatorname {E} (\xi _{k}\xi _{l})=0\ {\text{for}}\ l\neq k.} Then the k {\displaystyle k} -th mode of variation of X {\displaystyle \mathbf {X} } is the set of vectors, indexed by α {\displaystyle \alpha } , m k , α = μ ± α λ k e k , α ∈ [ − A , A ] , {\displaystyle \mathbf {m} _{k,\alpha }={\boldsymbol {\mu }}\pm \alpha {\sqrt {\lambda _{k}}}\mathbf {e} _{k},\alpha \in [-A,A],} where A {\displaystyle A} is typically selected as 2 or 3 {\displaystyle 2\ {\text{or}}\ 3} . === Modes of variation in FPCA === For a square-integrable random function X ( t ) , t ∈ T ⊂ R p {\displaystyle X(t),t\in {\mathcal {T}}\subset R^{p}} , where typically p = 1 {\displaystyle p=1} and T {\displaystyle {\mathcal {T}}} is an interval, denote the mean function by μ ( t ) = E ⁡ ( X ( t ) ) {\displaystyle \mu (t)=\operatorname {E} (X(t))} , and the covariance function by G ( s , t ) = Cov ⁡ ( X ( s ) , X ( t ) ) = ∑ k = 1 ∞ λ k φ k ( s ) φ k ( t ) , {\displaystyle G(s,t)=\operatorname {Cov} (X(s),X(t))=\sum _{k=1}^{\infty }\lambda _{k}\varphi _{k}(s)\varphi _{k}(t),} where λ 1 ≥ λ 2 ≥ ⋯ ≥ 0 {\displaystyle \lambda _{1}\geq \lambda _{2}\geq \cdots \geq 0} are the eigenvalues and { φ 1 , φ 2 , ⋯ } {\displaystyle \{\varphi _{1},\varphi _{2},\cdots \}} are the orthonormal eigenfunctions of the linear Hilbert–Schmidt operator G : L 2 ( T ) → L 2 ( T ) , G ( f ) = ∫ T G ( s , t ) f ( s ) d s . {\displaystyle G:L^{2}({\mathcal {T}})\rightarrow L^{2}({\mathcal {T}}),\,G(f)=\int _{\mathcal {T}}G(s,t)f(s)ds.} By the Karhunen–Loève theorem, one can express the centered function in the eigenbasis, X ( t ) − μ ( t ) = ∑ k = 1 ∞ ξ k φ k ( t ) , {\displaystyle X(t)-\mu (t)=\sum _{k=1}^{\infty }\xi _{k}\varphi _{k}(t),} where ξ k = ∫ T ( X ( t ) − μ ( t ) ) φ k ( t ) d t {\displaystyle \xi _{k}=\int _{\mathcal {T}}(X(t)-\mu (t))\varphi _{k}(t)dt} is the k {\displaystyle k} -th principal component with the properties E ⁡ ( ξ k ) = 0 , Var ⁡ ( ξ k ) = λ k , {\displaystyle \operatorname {E} (\xi _{k})=0,\operatorname {Var} (\xi _{k})=\lambda _{k},} and E ⁡ ( ξ k ξ l ) = 0 for l ≠ k . {\displaystyle \operatorname {E} (\xi _{k}\xi _{l})=0{\text{ for }}l\neq k.} Then the k {\displaystyle k} -th mode of variation of X ( t ) {\displaystyle X(t)} is the set of functions, indexed by α {\displaystyle \alpha } , m k , α ( t ) = μ ( t ) ± α λ k φ k ( t ) , t ∈ T , α ∈ [ − A , A ] {\displaystyle m_{k,\alpha }(t)=\mu (t)\pm \alpha {\sqrt {\lambda _{k}}}\varphi _{k}(t),\ t\in {\mathcal {T}},\ \alpha \in [-A,A]} that are viewed simultaneously over the range of α {\displaystyle \alpha } , usually for A = 2 or 3 {\displaystyle A=2\ {\text{or}}\ 3} . == Estimation == The formulation above is derived from properties of the population. Estimation is needed in real-world applications. The key idea is to estimate mean and covariance. === Modes of variation in PCA === Suppose the data x 1 , x 2 , ⋯ , x n {\displaystyle \mathbf {x} _{1},\mathbf {x} _{2},\cdots ,\mathbf {x} _{n}} represent n {\displaystyle n} independent drawings from some p {\displaystyle p} -dimensional population X {\displaystyle \mathbf {X} } with mean vector μ {\displaystyle {\boldsymbol {\mu }}} and covariance matrix Σ {\displaystyle \mathbf {\Sigma } } . These data yield the sample mean vector x ¯ {\displaystyle {\overline {\mathbf {x} }}} , and the sample covariance matrix S {\displaystyle \mathbf {S} } with eigenvalue-eigenvector pairs ( λ ^ 1 , e ^ 1 ) , ( λ ^ 2 , e ^ 2 ) , ⋯ , ( λ ^ p , e ^ p ) {\displaystyle ({\hat {\lambda }}_{1},{\hat {\mathbf {e} }}_{1}),({\hat {\lambda }}_{2},{\hat {\mathbf {e} }}_{2}),\cdots ,({\hat {\lambda }}_{p},{\hat {\mathbf {e} }}_{p})} . Then the k {\displaystyle k} -th mode of variation of X {\displaystyle \mathbf {X} } can be estimated by m ^ k , α = x ¯ ± α λ ^ k e ^ k , α ∈ [ − A , A ] . {\displaystyle {\hat {\mathbf {m} }}_{k,\alpha }={\overline {\mathbf {x} }}\pm \alpha {\sqrt {{\hat {\lambda }}_{k}}}{\hat {\mathbf {e} }}_{k},\alpha \in [-A,A].} === Modes of variation in FPCA === Consider n {\displaystyle n} realizations X 1 ( t ) , X 2 ( t ) , ⋯ , X n ( t ) {\displaystyle X_{1}(t),X_{2}(t),\cdots ,X_{n}(t)} of a square-integrable random function X ( t ) , t ∈ T {\displaystyle X(t),t\in {\mathcal {T}}} with the mean function μ ( t ) = E ⁡ ( X ( t ) ) {\displaystyle \mu (t)=\operatorname {E} (X(t))} and the covariance function G ( s , t ) = Cov ⁡ ( X ( s ) , X ( t ) ) {\displaystyle G(s,t)=\operatorname {Cov} (X(s),X(t))} . Functional principal component analysis provides methods for the estimation of μ ( t ) {\displaystyle \mu (t)} and G ( s , t ) {\displaystyle G(s,t)} in detail, often involving point wise estimate and interpolation. Substituting estimates for the unknown quantities, the k {\displaystyle k} -th mode of variation of X ( t ) {\displaystyle X(t)} can be estimated by m ^ k , α ( t ) = μ ^ ( t ) ± α λ ^ k φ ^ k ( t ) , t ∈ T , α ∈ [ − A , A ] . {\displaystyle {\hat {m}}_{k,\alpha }(t)={\hat {\mu }}(t)\pm \alpha {\sqrt {{\hat {\lambda }}_{k}}}{\hat {\varphi }}_{k}(t),t\in {\mathcal {T}},\alpha \in [-A,A].} == Applications == Modes of variation are useful to visualize and describe the variation patterns in the data sorted by the eigenvalues. In real-world applications, modes of variation associated with eigencomponents allow to interpret complex data, such as the evolution of function traits and other infinite-dimensional data. To illustrate how modes of variation work in practice, two examples are shown in the graphs to the right, which display the first two modes of variation. The solid curve represents the sample mean function. The dashed, dot-dashed, and dotted curves correspond to modes of variation with α = ± 1 , ± 2 , {\displaystyle \alpha =\pm 1,\pm 2,} and ± 3 {\displaystyle \pm 3} , respectively. The first graph displays the first two modes of variation of female mortality data from 41 countries in 2003. The object of interest is log hazard function between ages 0 and 100 years. The first mode of variation suggests that the variation of female mortality is smaller for ages around 0 or 100, and larger for ages around 25. An appropriate and intuitive interpretation is that mortality around 25 is driven by accidental death, while around 0 or 100, mortality is related to congenital disease or natural death. Compared to female mortality

  Read more →
• 

  Santa Fe Trail problem

  The Santa Fe Trail problem is a genetic programming exercise in which artificial ants search for food pellets according to a programmed set of instructions. The layout of food pellets in the Santa Fe Trail problem has become a standard for comparing different genetic programming algorithms and solutions. One method for programming and testing algorithms on the Santa Fe Trail problem is by using the NetLogo application. There is at least one case of a student creating a Lego robotic ant to solve the problem.

  Read more →
• 

  H (company)

  H Company, also known simply as H, is a French artificial intelligence startup which develops "action-oriented" artificial intelligence agents for enterprise automation and productivity. In May 2024, H Company closed a record-setting $220 million seed round, at the time the largest AI raise in Europe. In 2026, H Company released Holo 3, the latest generation of its computer-use AI models. The update marked a major advance in agentic AI, enabling agents to navigate any user interface, interpret screens, and complete complex, multi-step tasks across enterprise systems—much like a human user. This breakthrough positioned H Company at the frontier of computer-use autonomy, accelerating the integration of AI in enterprise workflows. == History == H Company was founded in 2023 in Paris by Laurent Sifre, Charles Kantor, and three DeepMind veterans: Daan Wiestra, Karl Tuyls, Julien Perollat. In May 2024, the firm secured what was then the largest European AI seed round, totaling $220 million led by US investors including Eric Schmidt (former Google CEO), Amazon, and backed by Accel, Bpifrance, UiPath, Eurazeo, Xavier Niel, Yuri Milner, Bernard Arnault, Samsung and others. In August 2024, three cofounders (Wiestra, Tuyls, Perollat) left the company over operational disagreements. In November 2024, H launched Runner H, its first agentic-API platform, which combined a large language model (LLM) and a reduced, 2-billion parameter vision-language model (VLM). In May 2025, H Company acquired Mithril Security, and in June 2025 the company widened its offering for agentic models. In June 2025, Gautier Cloix (formerly CEO Palantir France) replaced Charles Kantor as CEO of H Company, aiming to pivot the company towards a "forward deployed engineers" model. In July 2025, H Company introduced Surfer-H-CLI, an open-source, web-native Chrome agent designed for browser-based automation—able to search, scroll, click, and type on behalf of users and controllable via any visual language model (VLM). When paired with its June 2025 open-sourced 3B-parameter Holo-1 model, Surfer-H-CLI achieved 92.2% WebVoyager benchmark accuracy. == Activity == H Company creates enterprise AI models and agents (agentic AI) to automate and optimize complex workflows. H Company specifically designs AI agents called computer use capable of autonomously interfacing with any software (local or cloud-based) to detect and automate repetitive operations. H Company is based in Paris, France, with international offices in London and New York. H Company raised $220 million since its inception. Gautier Cloix is president and CEO of the company. H Company client include the French national lottery FDJ United. In March 2026, H Company released Holo3, a family of artificial intelligence models designed to operate digital systems by interacting directly with user interfaces. Holo3 enables agents ("virtual humanoids") to understand what is displayed in front-end environments—such as web pages, desktop applications, and other graphical user interfaces—and perform actions such as clicking, typing, and navigating across them to complete multi-step tasks. On the OSWorld-Verified benchmark, Holo3 reportedly achieved about 78.9%, surpassing the scores of OpenAI’s GPT‑5.4 and Anthropic’s Claude Opus 4.6 on this specific test, at roughly one-tenth of the inference cost of these proprietary systems. The release has been presented as a significant step toward automating routine digital workflows, allowing organizations to offload repetitive on-screen work, such as data entry and reconciliation across multiple tools, to AI-based agents.

  Read more →
• 

  ARKA descriptors in QSAR

  In computational chemistry and cheminformatics, ARKA descriptors in QSAR are a class of molecular descriptors used in quantitative structure–activity relationship (QSAR) modeling (or related approaches such as QSPR and QSTR), a computational method for predicting the biological activity or toxicity of chemical compounds based on their molecular structure. Molecular descriptors are numerical values that summarize information about a molecule's structure, topology, geometry, or physicochemical properties in a form suitable for machine learning or statistical modeling. ARKA (Arithmetic Residuals in K-Groups Analysis) descriptors differ from traditional descriptors by encoding atomic-level information through recursive autoregression techniques, which aim to capture subtle structural patterns and improve predictive accuracy. They are designed to be both interpretable and well-suited to modeling nonlinear relationships in QSAR studies. == Comparisons == While QSAR is essentially a similarity-based approach, the occurrence of activity/property cliffs may greatly reduce the predictive accuracy of the developed models. The novel Arithmetic Residuals in K-groups Analysis (ARKA) approach is a supervised dimensionality reduction technique developed by the DTC Laboratory, Jadavpur University that can easily identify activity cliffs in a data set. Activity cliffs are similar in their structures but differ considerably in their activity. The basic idea of the ARKA descriptors is to group the conventional QSAR descriptors based on a predefined criterion and then assign weightage to each descriptor in each group. ARKA descriptors have also been used to develop classification-based and regression-based QSAR models with acceptable quality statistics. The ARKA descriptors have been used for the identification of activity cliffs in QSAR studies and/or model development by multiple researchers. A tutorial presentation on the ARKA descriptors is available. Recently a multi-class ARKA framework has been proposed for improved q-RASAR model generation.

  Read more →
• 

  Amazon Rekognition

  Amazon Rekognition is a cloud-based software as a service (SaaS) computer vision platform that was launched in 2016. It has been sold to, and used by, a number of United States government agencies, including U.S. Immigration and Customs Enforcement (ICE) and Orlando, Florida police, as well as private entities. == Capabilities == Rekognition provides a number of computer vision capabilities, which can be divided into two categories: Algorithms that are pre-trained on data collected by Amazon or its partners, and algorithms that a user can train on a custom dataset. As of July 2019, Rekognition provides the following computer vision capabilities. === Pre-trained algorithms === Celebrity recognition in images Facial attribute detection in images, including gender, age range, emotions (e.g. happy, calm, disgusted), whether the face has a beard or mustache, whether the face has eyeglasses or sunglasses, whether the eyes are open, whether the mouth is open, whether the person is smiling, and the location of several markers such as the pupils and jaw line. People Pathing enables tracking of people through a video. An advertised use-case of this capability is to track sports players for post-game analysis. Text detection and classification in images Unsafe visual content detection === Algorithms that a user can train on a custom dataset === SearchFaces enables users to import a database of images with pre-labeled faces, to train a machine learning model on this database, and to expose the model as a cloud service with an API. Then, the user can post new images to the API and receive information about the faces in the image. The API can be used to expose a number of capabilities, including identifying faces of known people, comparing faces, and finding similar faces in a database. Face-based user verification == History and use == === 2017 === In late 2017, the Washington County, Oregon Sheriff's Office began using Rekognition to identify suspects' faces. Rekognition was marketed as a general-purpose computer vision tool, and an engineer working for Washington County decided to use the tool for facial analysis of suspects. Rekognition was offered to the department for free, and Washington County became the first US law enforcement agency known to use Rekognition. In 2018, the agency logged over 1,000 facial searches. The county, according to the Washington Post, by 2019 was paying about $7 a month for all of its searches. The relationship was unknown to the public until May 2018. In 2018, Rekognition was also used to help identify celebrities during a royal wedding telecast. === 2018 === In April 2018, it was reported that FamilySearch was using Rekognition to enable their users to "see which of their ancestors they most resemble based on family photographs". In early 2018, the FBI also began using it as a pilot program for analyzing video surveillance. In May 2018, it was reported by the ACLU that Orlando, Florida was running a pilot using Rekognition for facial analysis in law enforcement, with that pilot ending in July 2019. After the report, on June 22, 2018, Gizmodo reported that Amazon workers had written a letter to CEO Jeff Bezos requesting he cease selling Rekognition to US law enforcement, particularly ICE and Homeland Security. A letter was also sent to Bezos by the ACLU. On June 26, 2018, it was reported that the Orlando police force had ceased using Rekognition after their trial contract expired, reserving the right to use it in the future. The Orlando Police Department said that they had "never gotten to the point to test images" due to old infrastructure and low bandwidth. In July 2018, the ACLU released a test showing that Rekognition had falsely matched 28 members of Congress with mugshot photos, particularly Congresspeople of color. 25 House members afterwards sent a letter to Bezos, expressing concern about Rekognition. Amazon responded saying the Rekognition test had generated 80 percent confidence, while it recommended law enforcement only use matches rated at 99 percent confidence. The Washington Post states that Oregon instead has officers pick a "best of five" result, instead of adhering to the recommendation. In September 2018, it was reported that Mapillary was using Rekognition to read the text on parking signs (e.g. no stopping, no parking, or specific parking hours) in cities. In October 2018, it was reported that Amazon had earlier that year pitched Rekognition to U.S. Immigration and Customs Enforcement agency. Amazon defended government use of Rekognition. On December 1, 2018, it was reported that 8 Democratic lawmakers had said in a letter that Amazon had "failed to provide sufficient answers" about Rekognition, writing that they had "serious concerns that this type of product has significant accuracy issues, places disproportionate burdens on communities of color, and could stifle Americans' willingness to exercise their First Amendment rights in public." === 2019 === In January 2019, MIT researchers published a peer-reviewed study asserting that Rekognition had more difficulty in identifying dark-skinned females than competitors such as IBM and Microsoft. In the study, Rekognition misidentified darker-skinned women as men 31% of the time, but made no mistakes for light-skinned men. Amazon called the report "misinterpreted results" of the research with an improper "default confidence threshold." In January 2019, Amazon's shareholders "urged Amazon to stop selling Rekognition software to law enforcement agencies." Amazon in response defended its use of Rekognition, but supported new federal oversight and guidelines to "make sure facial recognition technology cannot be used to discriminate." In February 2019, it was reported that Amazon was collaborating with the National Institute of Standards and Technology (NIST) on developing standardized tests to improve accuracy and remove bias with facial recognition. In March 2019, an open letter regarding Rekognition was sent by a group of prominent AI researchers to Amazon, criticizing its sale to law enforcement with around 50 signatures. In April 2019, Amazon was told by the Securities and Exchange Commission that they had to vote on two shareholder proposals seeking to limit Rekognition. Amazon argued that the proposals were an "insignificant public policy issue for the Company" not related to Amazon's ordinary business, but their appeal was denied. The vote was set for May. The first proposal was tabled by shareholders. On May 24, 2019, 2.4% of shareholders voted to stop selling Rekognition to government agencies, while a second proposal calling for a study into Rekognition and civil rights had 27.5% support. In August 2019, the ACLU again used Rekognition on members of government, with 26 of 120 lawmakers in California flagged as matches to mugshots. Amazon stated the ACLU was "misusing" the software in the tests, by not dismissing results that did not meet Amazon's recommended accuracy threshold of 99%. By August 2019, there had been protests against ICE's use of Rekognition to surveil immigrants. In March 2019, Amazon announced a Rekognition update that would improve emotional detection, and in August 2019, "fear" was added to emotions that Rekognition could detect. === 2020 === In June 2020, Amazon announced it was implementing a one-year moratorium on police use of Rekognition, in response to the George Floyd protests. === 2024 === The Department of Justice disclosed that the FBI is initiating the use of Amazon Rekognition. The DOJ's AI inventory revealed the FBI's "Project Tyr" aims to customize Rekognition to identify nudity, weapons, explosives, and other information from lawfully acquired media. === 2025 === In late 2025, the New York Times reported that scientist, Dr. Jürgen Matthäus, retired from as the head of research at the U.S. Holocaust Memorial Museum in Washington, D.C., used Amazon Rekognition to identify the shooter in the Holocaust photograph known as The Last Jew in Vinnitsa "with more than 99 percent certainty" — as Jakobus Onnen (1906–1943), a teacher from Tichelwarf near Weener in East Frisia who had been a member of the SS since 1934 and was later killed in action near Zhitomir in 1943. The photographer and victim remain unidentified. == Controversy regarding facial analysis == === Racial and gender bias === In 2018, MIT researchers Joy Buolamwini and Timnit Gebru published a study called Gender Shades. In this study, a set of images was collected, and faces in the images were labeled with face position, gender, and skin tone information. The images were run through SaaS facial recognition platforms from Face++, IBM, and Microsoft. In all three of these platforms, the classifiers performed best on male faces (with error rates on female faces being 8.1% to 20.6% higher than error rates on male faces), and they performed worst on dark female faces (with error rates ranging from 20.8% to 30.4%). The authors hypothesized that this discr

  Read more →
• 

  Generalized iterative scaling

  In statistics, generalized iterative scaling (GIS) and improved iterative scaling (IIS) are two early algorithms used to fit log-linear models, notably multinomial logistic regression (MaxEnt) classifiers and extensions of it such as MaxEnt Markov models and conditional random fields. These algorithms have been largely surpassed by gradient-based methods such as L-BFGS and coordinate descent algorithms.

  Read more →
• 

  Digital art

  Digital art, or the digital arts, is artistic work that uses digital technology as part of the creative or presentational process. It can also refer to computational art that uses and engages with digital media. Since the 1960s, various names have been used to describe digital art, including computer art, electronic art, multimedia art, and new media art. Digital art includes pieces stored on physical media, such as with digital painting, as well as digital galleries on websites. Digital art also extends to the field of visual computing. == History == In the early 1960s, John Whitney developed the first computer-generated art using mathematical operations. In 1963, Ivan Sutherland invented the first user interactive computer-graphics interface known as Sketchpad. Between 1974 and 1977, Salvador Dalí created two big canvases of Gala Contemplating the Mediterranean Sea which at a distance of 20 meters is transformed into the portrait of Abraham Lincoln (Homage to Rothko) and prints of Lincoln in Dalivision based on a portrait of Abraham Lincoln processed on a computer by Leon Harmon published in "The Recognition of Faces". The technique is similar to what later became known as photographic mosaics. Andy Warhol created digital art using an Amiga where the computer was publicly introduced at the Lincoln Center in July 1985. An image of Debbie Harry was captured in monochrome from a video camera and digitized into a graphics program called ProPaint. Warhol manipulated the image by adding color using flood fills. == Art made for digital media == Artwork that is highly computational, presented through digital media, and explicitly engages with digital technologies are categorized as "art made for digital media". This differs from art using digital tools, which incorporate digital technology in the creation process but may exist outside the digital world. Digital art historian Christiane Paul writes that it "is highly problematic to classify all art that makes use of digital technologies somewhere in its production and dissemination process as digital art since it makes it almost impossible to arrive at any unifying statement about the art form". == Art that uses digital tools == Digital art can be purely computer-generated (such as fractals and algorithmic art) or taken from other sources, such as a scanned photograph or an image drawn using vector graphics software using a mouse or graphics tablet. Artworks are considered digital paintings when created similarly to non-digital paintings but using software on a computer platform and digitally outputting the resulting image as painted on canvas. Despite differing viewpoints on digital technology's impact on the arts, a consensus exists within the digital art community about its significant contribution to expanding the creative domain, i.e., that it has greatly broadened the creative opportunities available to professional and non-professional artists alike. == Art theorists and art historians == Notable art theorists and historians in this field include: Oliver Grau, Jon Ippolito, Christiane Paul, Frank Popper, Jasia Reichardt, Mario Costa, Christine Buci-Glucksmann, Dominique Moulon, Roy Ascott, Catherine Perret, Margot Lovejoy, Edmond Couchot, Tina Rivers Ryan, Fred Forest and Edward A. Shanken. === Digital painting === Digital painting is either a physical painting made with the use of digital electronics and spray paint robotics within the digital art fine art context or pictorial art imagery made with pixels on a computer screen that mimics artworks from the traditional histories of painting and illustration. === Artificial intelligence art === Artists have used artificial intelligence to create artwork since at least the 1960s. Since their design in 2014, some artists have created artwork using a generative adversarial network (GAN), which is a machine learning framework that allows two "algorithms" to compete with each other and iterate. It can be used to generate pictures that have visual effects similar to traditional fine art. The essential idea of image generators is that people can use text descriptions to let AI convert their text into visual picture content. Anyone can turn their language into a painting through a picture generator. == Digital art education == Digital art education has become more common with the advancement of digital hardware and software. From hardware such as graphics tablets, styluses, tablets, 3D scanners, virtual reality headsets, and digital cameras; to software such as digital art software, 3D modeling software, 3D rendering, digital sculpting, 2D graphics software, digital painting, 3D terrain generation, 2D animation software, 3D animation software, raster graphics editors, vector graphics editors, mathematical art software, and video editing software. == Scholarship and archives == In addition to the creation of original art, research methods that utilize AI have been generated to quantitatively analyze digital art collections. This has been made possible due to the large-scale digitization of artwork in the past few decades. Although the main goal of digitization was to allow for accessibility and exploration of these collections, the use of AI in analyzing them has brought about new research perspectives. Two computational methods, close reading and distant viewing, are the typical approaches used to analyze digitized art. Close reading focuses on specific visual aspects of one piece. Some tasks performed by machines in close reading methods include computational artist authentication and analysis of brushstrokes or texture properties. In contrast, through distant viewing methods, the similarity across an entire collection for a specific feature can be statistically visualized. Common tasks relating to this method include automatic classification, object detection, multimodal tasks, knowledge discovery in art history, and computational aesthetics. Whereas distant viewing includes the analysis of large collections, close reading involves one piece of artwork. Whilst 2D and 3D digital art is beneficial as it allows the preservation of history that would otherwise have been destroyed by events like natural disasters and war, there is the issue of who should own these 3D scans – i.e., who should own the digital copyrights. === Computer demos === Computer demos are based on computer programs, usually non-interactive. It produces audiovisual presentations. They are a novel form of art, which emerged as a consequence of the home computer revolution in the early 1980s. In the classification of digital art, they can be best described as real-time procedurally generated animated audio-visuals. This form of art does not concentrate only on the aesthetics of the final presentation, but also on the complexities and skills involved in creating the presentation. As such, it can be fully enjoyed only by persons with a relatively high knowledge level of relevant computer technologies. An example is that, as said by Hua Jin and Jie Yang, Using computer-aided design software to present the class content in art design teaching," is not to advocate computer-aided design instead of hand-drawn performance, but to make it serve the profession earlier through a more reasonable course arrangement." On the other hand, many of the created pieces of art are primarily aesthetic or amusing, and those can be enjoyed by the general public. === Digital installation art === Digital installation art constitutes a broad field of artistic practices and a variety of forms. Some resemble video installations, especially large-scale works involving projections and live video capture. By using projection techniques that enhance an audience's impression of sensory envelopment, many digital installations attempt to create immersive environments. While others go even further and attempt to facilitate a complete immersion in virtual realms. This type of installation is generally site-specific, scalable, and without fixed dimensionality, meaning it can be reconfigured to accommodate different presentation spaces. Scott Snibbe's "Boundary Functions" is an example of augmented reality digital installation art, which responds to people who enter the installation by drawing lines between people, indicating their personal space.Noah Wardrip-Fruin's "Screen"(2003) utilizes a Cave Automatic Virtual Environment (CAVE) to create an interactive, text-based digital experience that engages the viewer in a multi-sensory interaction. === Internet art and net.art === Internet art is digital art that uses the specific characteristics of the Internet and is exhibited on the Internet. The term "internet art" is included by "net art" for which artists assume that network will be refreshed through history. So the term "post-internet art" is used to exclude artworks outside of the internet media. A representative example is Protocols for Achievements, which is a digital photo frame that confronts the aestheti

  Read more →
• 

  Bioz

  Bioz is a search engine for life science experimentation. == History == Bioz was founded by Karin Lachmi and Daniel Levitt. Lachmi is a scientist who completed her postdoc in molecular and cellular biology at the Stanford University School of Medicine. During her lab work she found little available data regarding preferable lab tools, reagents and related products for experimentation. There are 50,000 vendors selling 300 million scientific products. She decided to start the company in order to provide researchers with adequate information for that purpose. Co-founder Daniel Levitt is an entrepreneur who sold his company WebAppoint to Microsoft in the year 2000. He also co-founded the company StemRad. At Bioz, Lachmi serves as the Chief Scientific Officer and Levitt serves as the chief executive officer. Bioz claims to have over a million researcher-users from 196 countries. Among the investors are Esther Dyson and the Stanford-StartX Fund. The company's advisory board includes Nobel Laureates in Chemistry Michael Levitt, Roger Kornberg, and Ada Yonath. == Technology == The company uses artificial intelligence, machine learning and natural language processing in order to extract experimentation data from scientific articles, such as the products that researchers used, the companies that supply the products, the protocol conditions that researchers selected, and the types of experiments and techniques. The algorithm ranks products based on how frequently they were used by researchers in their experiments, how recently a product was used, and the impact factor of the journal. The algorithm's output is a Bioz stars score for each product that was mentioned in an article. Bioz is a data-driven platform for product recommendations, which is contrary to platforms such as TripAdvisor and OpenTable that are based on user-generated reviews and ratings. The recommendations and scoring system that the company has developed are meant to assist researchers with the process of developing future medications and finding cures for diseases. They are guided towards products and techniques that were previously used by other researchers when planning and performing experiments. The company's revenue is based on selling SaaS subscriptions to researchers in biopharma companies. They also charge product suppliers for content syndication.

  Read more →
• 

  World Programming System

  The World Programming System, also known as WPS Analytics or WPS, is a software product developed by a company called World Programming (acquired by Altair Engineering). WPS Analytics supports users of mixed ability to access and process data and to perform data science tasks. It has interactive visual programming tools using data workflows, and it has coding tools supporting the use of the SAS language mixed with Python, R and SQL. == About == WPS can use programs written in the language of SAS without the need for translating them into any other language. In this regard WPS is compatible with the SAS system. WPS has a built-in language interpreter able to process the language of SAS and produce similar results. WPS is available to run on z/OS, Windows, macOS, Linux (x86, Armv8 64-bit, IBM Power LE, IBM Z), and AIX. On all supported platforms, programs written in the language of SAS can be executed from a WPS command line interface, often referred to as running in batch mode. WPS can also be used from a graphical user interface known as the WPS Workbench for managing, editing and running programs written in the language of SAS. The WPS Workbench user interface is based on Eclipse. WPS version 4 (released in March 2018) introduced a drag-and-drop workflow canvas providing interactive blocks for data retrieval, blending and preparation, data discovery and profiling, predictive modelling powered by machine learning algorithms, model performance validation and scorecards. WPS version 3 (released in February 2012) provided a new client/server architecture that allows the WPS Workbench GUI to execute SAS programs on remote server installations of WPS in a network or cloud. The resulting output, data sets, logs, etc., can then all be viewed and manipulated from inside the Workbench as if the workloads had been executed locally. SAS programs do not require any special language statements to use this feature. == Summary of main features == Runs on Windows, macOS, z/OS, Linux (x86, Armv8 64-bit, IBM Power LE, IBM Z), and AIX An integrated development environment based on Eclipse for Linux, macOS and Windows. Support for language of SAS elements. Support for the language of SAS Macros. Matrix Programming support using PROC IML. Support for generating band plots, bar charts, box plots, bubble plots, contour plots, dendrogram plots, ellipse plots, fringe plots, heat maps, high-low plots, histograms, loess plots, needle plots, pie charts, penalised b-spline, radar charts, reference lines, scatter plots, series plots, step plots, regression plots and vector plots. Support for statistical procedures ACECLUS, ASSOCRULES, ANOVA, BIN, BOXPLOT, CANCORR, CANDISC, CLUSTER, CORRESP, DISCRIM, DISTANCE, FACTOR, FASTCLUS, FREQ, GAM, GANNO, GENMOD, GLIMMIX, GLM, GLMMOD, GLMSELECT, ICLIFETEST, KDE, LIFEREG, LIFETEST, LOESS, LOGISTIC, MDS, MEANS, MI, MIANALYSE, MIXED, MODECLUS, NESTED, NLIN, NPAR1WAY, PHREG, PLAN, PLS, POWER, PRINCOMP, PROBIT, QUANTREG, RBF, REG, ROBUSTREG, RSREG, SCORE, SEGMENT, SIMNORMAL, STANDARD, STDSIZE, STDRATE, STEPDISC, SUMMARY, SURVEYMEANS, SURVEYSELECT, TPSPLINE, TRANSREG, TREE, TTEST, UNIVARIATE, VARCLUS, VARCOMP Support for time series procedures ARIMA, AUTOREG, ESM, EXPAND, FORECAST, LOAN, SEVERITY, SPECTRA, TIMESERIES, X12 Support for machine learning procedures DECISIONFOREST, DECISIONTREE, GMM, MLP, OPTIMALBIN, SEGMENT, SVM Support for ODS. Reads and writes SAS datasets (compressed or uncompressed). Access: Actian Matrix (previously known as ParAccel), DASD, DB2, Excel, Greenplum, Hadoop, Informix, Kognitio Archived 2012-08-24 at the Wayback Machine, MariaDB, MySQL, Netezza, ODBC, OLEDB, Oracle, PostgreSQL, SAND, Snowflake, SPSS/PSPP, SQL Server, Sybase, Sybase IQ, Teradata, VSAM, Vertica and XML. Support for SAS Tape Format. Direct output of reports to CSV, PDF and HTML. Support to connect WPS systems programmatically, remote submit parts of a program to execute on connected remote servers, upload and download data between the connected systems. Support for Hadoop Support for R Support for Python == Industry recognition == Gartner recognized World Programming in their Cool Vendors in Data Science, 2014 Report. == Lawsuit == In 2010 World Programming defended its use of the language of SAS in the High Court of England and Wales in SAS Institute Inc. v World Programming Ltd. The software was the subject of a lawsuit by SAS Institute. The EU Court of Justice ruled in favor of World Programming, stating that the copyright protection does not extend to the software functionality, the programming language used and the format of the data files used by the program. It stated that there is no copyright infringement when a company which does not have access to the source code of a program studies, observes and tests that program to create another program with the same functionality.

  Read more →