AI Generator Website

AI Generator Website — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Passenger drone

  A passenger drone is an autonomous aircraft that is designed to carry a small number of passengers to a destination. In 2021, Ehang, a technology company based in Guangzhou, China, developed the Ehang 184, the world's first passenger drone. == History == Unmanned aerial vehicles were first introduced in World War 1, when Britain first developed the Aerial Target, an aircraft controlled remotely through radio signals. A year later in the United States, testing of Kettering Bug, a 12-foot long biplane attached with a bomb and that launched via a “slingshot-like rail”, was also under progress. Both of their unreliable test results and their possibility of endangering friendly troops in deployment caused neither aircraft to be used during the war. Production of UAVs continued after World War I and into World War II and the Vietnam War, where they would be invaluable in assisting with training as well as reconnaissance. Late 20th century also saw the proposition and development of unique methods of travel, including personal jetpacks and even flying cars. While the previously mentioned are not drones, they serve as a precursor and foundation for the passenger drones of today. The first passenger drone was unveiled on January 6 of 2016 at the international Consumer Electronics Show (CES) in Las Vegas. Produced by Ehang, a Chinese company based in Guangzhou, the 184 was a one passenger drone equipped with four propellers that could fly for approximately 23 minutes at a top speed of 63 mph. Since then, many new companies have entered the market, but none yet have been accessible by the public. == Technological development == Since 2013, improvements in designs to wing structures have contributed to the economic feasibility of passenger drones. New structural advancements, such as the flapping-wing propulsion system based on the mechanisms of birds’ wings, are more available as they have proven their capabilities in laboratory testing. As of September 29th, 2015, most market-ready drones are delivery drones with a carrying capacity limited to small packages - with a typical max capacity of under 5 pounds. However, while the technology exists for drones with larger carrying capacities, specifically those capable of carrying multiple humans, the execution of this technology is not yet market accessible. This capacity limit must be addressed for passenger drones; given current designs strive to carry a maximum of 5 people. However, some estimates believe that passengers drones could become a reality, specifically for paid transportation and emergency purposes, as early as 2026. With implementation of this technology, there could be significant effects on ground traffic including reducing gridlock in heavily congested areas and conserving up to 15% of the fuel currently used in heavy traffic patterns. However, extensive growth of the passenger drone market also risks clouding the low-altitude airspace and causing new safety risks. However, this concern is being addressed by recent advancements in the Internet of Drones (IoD) which links drones together to ensure appropriate pathing and reduce mid-air collisions. While this brings additional security issues, including maintaining reliable communication channels in the case of technological failure, researchers hope that this will help reduce crashes that can result in damage to passengers, buildings, and people in and around the airspace. == Notable companies == Ehang is a Chinese company that has developed numerous drones including passenger plane Ehang 184. EHang 184 was their first model, developed as an eight dual rotor wing blade drone that can carry two passengers. The model was retired in 2020 and is replaced by the Ehang 216. Ehang also released a one passenger drone, Ehang 116. Ehang in 2021 unveiled the model VT-30. VT-30 is designed to have eight dual rotor wing blades to complement its fixed wing platform. Flyastro, a Texas-based drone company, developed the Astro ALTA, with two and four person passenger models. The company is known for being the first to develop a solar-powered airplane. The development team initially began with the model, Elroy. It was a two passenger drone with similar design to the ALTA. Once flight was achieved, the model Astro ALTA began development. Joby Aviation is a California based company that has developed a five passenger drone, with one seat for the pilot. The company expects to complete its FAA certification process 2022. Joby in 2020 acquired a 75 million dollar investment from service provider Uber Technologies Inc., leading to Uber Elevate and Expands partnership. Archer Aviation is a California-based company that has developed a two passenger model called Maker. It has fixed wings with twelve rotor wings. Archer is developing five person model. United Airlines has partnered with Archer for commercial sale of the model, Maker. Maker is expected to be released within Los Angeles and Miami by 2024. CityAirbus is a drone project developed by Airbus, a European multinational aerospace company, based in the Netherlands. CityAirbus has developed a four- person passenger drone with fixed wings that include rotor wing blades. Its expected certification for public flight is in 2025. Boeing, an American multinational aviation corporation is developing a passenger drone model called the Passenger Air Vehicle (PAV). The model is a fixed wing with eight rotor blade wings attached onto a platform underneath the base structure. This model can hold two passengers and still is in development. Volocopter is a German aircraft manufacturer that is developing a passenger drone called Volocity. The model consist of eighteen rotor wings above the cockpit on a circular ring. Japan Airlines, an investor of Volocopter plans to have public test in Japan as early as 2023. == Future use == === Potential benefits === Passenger drones can greatly reduce the time for travel. As passenger drones flight paths are not restricted by conventional roads, the travel distance is shortened. Current ventures such as Joby Aviation, after acquiring Uber Air, plan to take advantage of this technology in the form of air taxis. Other potential benefits include the use of passenger drones by emergency services such as search and rescue missions and the delivery of life saving goods. Companies like Ehang have already begun using passenger drones as emergency vehicles as a response to the potential river collapses during the flood season in China. === Concerns === Passenger and air traffic safety remains at the forefront of concerns. Regulations for air traffic centered around passenger drones are still underway and would continue to develop with increasing use cases for passenger drones. Remote security threats on commercial drones such as Man-In-The-Middle (MITM) attack have also exposed the vulnerabilities in current drone systems. Among American adults, 54 percent say that they would feel unsafe flying inside a passenger drone. Passenger drones can be very noisy; a single passenger drone such as Joby Aviation’s all-electric vertical take-off and landing (“eVTOL”) aircraft has an estimated noise production of 70 decibels (dB), a noise level equating to “loud traffic”.

  Read more →
• 

  KKday

  KKday is an online travel e-commerce platform focused on connecting independent travelers with authentic, curated local experiences, tours, activities, and attraction tickets. == History == KKday was founded in 2014 in Taipei, Taiwan, by CEO Ming Chen, who previously started and led both Star Travel and Ezfly to IPO. In March of 2016, the company raised US$4.5 million in a Series A round led by AppWorks Ventures with participation by 91Capital. The raise allowed KKday to open offices and expand into Hong Kong, Japan, South Korea and Singapore by 2016. By the end of 2016, KKday offered over 6,000 travel experiences across 53 countries and 174 cities, marking early international expansion with its official launch in Singapore in October 2016, accompanied by promotional campaigns to attract regional users. Expansion into Malaysia, Thailand, Vietnam and the Philippines continued throughout 2017 and into 2018, with the company opening offices in Indonesia and mainland China. KKday rapidly expanded its inventory, reaching over 10,000 experiences in more than 500 cities across 80 countries by 2018, with key markets in Taiwan, Hong Kong, and South Korea. In February 2018, KKday raised $10.5 million in a funding round led by Japanese travel giant H.I.S., allowing integration with larger travel networks and further global growth. Forbes reports that by the end of 2018, the company operated in 11 countries and regions, employed around 400 staff, and recorded over 4 million weekly website views with more than 1 million app downloads. A combination of a Japanese and South Korean trade dispute, along with the Covid-19 pandemic in 2020, lead KKday to pivot quickly toward domestic staycations and local experiences while initially raising $70m in their Series C which, was later extended to $95m. The Series C funds were partially used to accelerate and expand Rezio. Launched in 2019, Rezio is KKday's B2B SaaS booking management platform for travel providers, allowing them to track inventory, manage reservations and sell tickets. FineDayClub was launched in 2020 by KKday as a personalized luxury subscription travel service to cater to high end clients. KKday’s CFO, Jenny Tsai pivoted to lead KKday’s new venture. KKday was able to successfully navigate and adapt to travel patterns during the Covid-19 pandemic by reducing user acquisition costs by two thirds and focusing on domestic travel experiences to drive bookings and revenue. KKday was particularly successful in Vietnam, with bookings increased by 2,000% through 2022 and the company's travel operator platform Rezio, onboarding over 1,200 operators inside the country. In 2021, KKday acquired Activity Japan, a domestic focused travel company, founded by Kimiharu Obuchi in 2014. The successful acquisition, a key factor in KKday’s rapid expansion in the Japanese market, was facilitated by H.I.S., a common early investor in both platforms. In 2023 KKday inked a partnership with Rail Europe to create an all-in-one platform for 150 rail lines over 33 European countries with the intent of increasing ridership across Europe. In late 2024, KKday completed its Series D at $70M, bringing the total amount of capital raised to over $250M. The funds are to be earmarked for continued global expansion, artificial intelligence integration and enhanced partnerships, similar to the partnership with Tablelog, which now allows users to book restaurant reservations at 42,000 restaurants in Japan through the platform. == Platform == KKDay is an e-commerce online travel agency operating in 92 countries with over 350,000 travel experiences available for booking. The company started with focus on authentic local travel experiences in the Asian Pacific market and has expanded to a more global focus. KKday connects travelers with travel services and experiences such as attraction tickets, theme parks, cultural experiences, and seasonal events. KKday has positioned itself as an all-in-one travel super app with booking for hotels, rental cars, flights, sim cards, rail passes, dining and tickets. === Rezio === Rezio is a cloud-based SaaS booking management platform developed by KKday specifically for tour operators, activity providers, and attractions in the travel industry. It serves as an all-in-one system designed to help these businesses digitize their operations, particularly those previously relying on offline processes. Features include a mobile app for on-the-go order management, customer information checks, and voucher scanning, as well as channel management, analytics for customer data, and integrations with multiple OTAs and payment providers. Unlike KKday, which is an OTA marketplace for consumer exposure (with commissions), Rezio focuses on backend operations for suppliers, allowing brand independence, operational efficiency, and direct customer relationships while optionally connecting to OTAs like KKday. Rezio supports over 5,000 merchants, 30,000 experiences, and 10 million travelers worldwide, with a strong presence in Asia. One of the brands successful implementations was at the Nikko Toshogu Shrine where Rezio was implemented to help with long lines and wait times due to over-tourism. The shrine was able to implement the inventory management features to allow online booking and cashless payments onsite. === FineDayClub === FineDayClub is a membership-based travel concierge service launched in late 2020 by KKday. It is aimed at families, and organizations seeking customized travel experiences. It offers one-on-one advisory services. === ActivityJapan === ActivityJapan is a Japanese comprehensive online travel site that specializes in authentic Japanese travel experiences. It was purchased by KKday in 2021 but continues to operate independently.

  Read more →
• 

  LTE Advanced

  LTE Advanced, also named or recognized as LTE+, LTE-A or 4G+, is a 4G mobile cellular communication standard developed by 3GPP as a major enhancement of the Long Term Evolution (LTE) standard. Three technologies from the LTE-Advanced tool-kit – carrier aggregation, 4x4 MIMO and 256QAM modulation in the downlink – if used together and with sufficient aggregated bandwidth, can deliver maximum peak downlink speeds approaching, or even exceeding, 1 Gbit/s. This is significantly more than the peak 300 Mbit/s rate offered by the preceding LTE standard. Later developments have resulted in LTE Advanced Pro (or 4.9G) which increases bandwidth even further. The first ever LTE Advanced network was deployed in 2013 by SK Telecom in South Korea. In August 2019, the Global mobile Suppliers Association (GSA) reported that there were 304 commercially launched LTE-Advanced networks in 134 countries. Overall, 335 operators are investing in LTE-Advanced (in the form of tests, trials, deployments or commercial service provision) in 141 countries. == Name == LTE Advanced is also named (indicated as) LTE+, LTE-A, or (on Samsung Galaxy and Xiaomi smartphones) as 4G+. Such networks have also often been described as ‘Gigabit LTE networks’ mirroring a term that is also used in the fixed broadband industry. == History == The mobile communication industry and standards organizations have therefore started work on 4G access technologies, such as LTE Advanced. At a workshop in April 2008 in China, 3GPP agreed the plans for work on Long Term Evolution (LTE). A first set of specifications were approved in June 2008. Besides the peak data rate 1 Gb/s as defined by the ITU-R, it also targets faster switching between power states and improved performance at the cell edge. Detailed proposals are being studied within the working groups. The LTE+ format was first proposed by NTT DoCoMo of Japan and has been adopted as the international standard. It was formally submitted as a candidate 4G to ITU-T in late 2009 as meeting the requirements of the IMT-Advanced standard, and was standardized by the 3rd Generation Partnership Project (3GPP) in March 2011 as 3GPP Release 10. The work by 3GPP to define a 4G candidate radio interface technology started in Release 9 with the study phase for LTE-Advanced. Being described as a 3.9G (beyond 3G but pre-4G), the first release of LTE did not meet the requirements for 4G (also called IMT Advanced as defined by the International Telecommunication Union) such as peak data rates up to 1 Gb/s. The ITU has invited the submission of candidate Radio Interface Technologies (RITs) following their requirements in a circular letter, 3GPP Technical Report (TR) 36.913, "Requirements for Further Advancements for E-UTRA (LTE-Advanced)." These are based on ITU's requirements for 4G and on operators’ own requirements for advanced LTE. Major technical considerations include the following: Continual improvement to the LTE radio technology and architecture Scenarios and performance requirements for working with legacy radio technologies Backward compatibility of LTE-Advanced with LTE. An LTE terminal should be able to work in an LTE-Advanced network and vice versa. Any exceptions will be considered by 3GPP. Consideration of recent World Radiocommunication Conference (WRC-07) decisions regarding frequency bands to ensure that LTE-Advanced accommodates the geographically available spectrum for channels above 20 MHz. Also, specifications must recognize those parts of the world in which wideband channels are not available. Likewise, 'WiMAX 2', 802.16m, has been approved by ITU as the IMT Advanced family. WiMAX 2 is designed to be backward compatible with WiMAX 1 devices. Most vendors now support conversion of 'pre-4G', pre-advanced versions and some support software upgrades of base station equipment from 3G. == Proposals == The target of 3GPP LTE Advanced is to reach and surpass the ITU requirements. LTE Advanced should be compatible with first release LTE equipment, and should share frequency bands with first release LTE. In the feasibility study for LTE Advanced, 3GPP determined that LTE Advanced would meet the ITU-R requirements for 4G. The results of the study are published in 3GPP Technical Report (TR) 36.912. One of the important LTE Advanced benefits is the ability to take advantage of advanced topology networks; optimized heterogeneous networks with a mix of macrocells with low power nodes such as picocells, femtocells and new relay nodes. The next significant performance leap in wireless networks will come from making the most of topology, and brings the network closer to the user by adding many of these low power nodes – LTE Advanced further improves the capacity and coverage, and ensures user fairness. LTE Advanced also introduces multicarrier to be able to use ultra wide bandwidth, up to 100 MHz of spectrum supporting very high data rates. In the research phase many proposals have been studied as candidates for LTE Advanced (LTE-A) technologies. The proposals could roughly be categorized into: Support for relay node base stations Coordinated multipoint (CoMP) transmission and reception UE Dual TX antenna solutions for SU-MIMO and diversity MIMO, commonly referred to as 2x2 MIMO Scalable system bandwidth exceeding 20 MHz, up to 100 MHz Carrier aggregation of contiguous and non-contiguous spectrum allocations Local area optimization of air interface Nomadic / Local Area network and mobility solutions Flexible spectrum usage Cognitive radio Automatic and autonomous network configuration and operation Support of autonomous network and device test, measurement tied to network management and optimization Enhanced precoding and forward error correction Interference management and suppression Asymmetric bandwidth assignment for FDD Hybrid OFDMA and SC-FDMA in uplink UL/DL inter eNB coordinated MIMO SONs, Self Organizing Networks methodologies Within the range of system development, LTE-Advanced and WiMAX 2 can use up to 8x8 MIMO and 128-QAM in downlink direction. Example performance: 100 MHz aggregated bandwidth, LTE-Advanced provides almost 3.3 Gbit peak download rates per sector of the base station under ideal conditions. Advanced network architectures combined with distributed and collaborative smart antenna technologies provide several years road map of commercial enhancements. The 3GPP standards Release 12 added support for 256-QAM. A summary of a study carried out in 3GPP can be found in TR36.912. == Timeframe and introduction of additional features == Original standardization work for LTE-Advanced was done as part of 3GPP Release 10, which was frozen in April 2011. Trials were based on pre-release equipment. Major vendors support software upgrades to later versions and ongoing improvements. In order to improve the quality of service for users in hotspots and on cell edges, heterogeneous networks (HetNets) are formed of a mixture of macro-, pico- and femto base stations serving corresponding-size areas. Frozen in December 2012, 3GPP Release 11 concentrates on better support of HetNet. Coordinated Multi-Point operation (CoMP) is a key feature of Release 11 in order to support such network structures. Whereas users located at a cell edge in homogenous networks suffer from decreasing signal strength compounded by neighbor cell interference, CoMP is designed to enable use of a neighboring cell to also transmit the same signal as the serving cell, enhancing quality of service on the perimeter of a serving cell. In-device Co-existence (IDC) is another topic addressed in Release 11. IDC features are designed to ameliorate disturbances within the user equipment caused between LTE/LTE-A and the various other radio subsystems such as WiFi, Bluetooth, and the GPS receiver. Further enhancements for MIMO such as 4x4 configuration for the uplink were standardized. The higher number of cells in HetNet results in user equipment changing the serving cell more frequently when in motion. The ongoing work on LTE-Advanced in Release 12, amongst other areas, concentrates on addressing issues that come about when users move through HetNet, such as frequent hand-overs between cells. It also included use of 256-QAM. == First technology demonstrations and field trials == This list covers technology demonstrations and field trials up to the year 2014, paving the way for a wider commercial deployment of the VoLTE technology worldwide. From 2014 onwards various further operators trialled and demonstrated the technology for future deployment on their respective networks. These are not covered here. Instead a coverage of commercial deployments can be found in the section below. == LTE Advanced Pro == LTE Advanced Pro (LTE-A Pro, also known as 4.5G, 4.5G Pro, 4.9G, Pre-5G, 5G Project) is a name for 3GPP release 13 and 14. It is an evolution of LTE Advanced (LTE-A) cellular standard supporting data rates in excess of 3 Gbit/s using 32-carrier aggregation. It also introduces th

  Read more →
• 

  Blocking of Twitter in Nigeria

  Twitter was blocked in Nigeria from 5 June 2021 to 13 January 2022. The government imposed a ban on the social network after it deleted tweets made by, and temporarily suspended, the Nigerian president Muhammadu Buhari, warning the southeastern people of Nigeria, predominantly Igbo people, of a potential repeat of the 1967 Nigerian Civil War due to the ongoing insurgency in Southeastern Nigeria. The Nigerian government claimed that the deletion of the president's tweets factored into their decision, but it was ultimately based on "a litany of problems with the social media platform in Nigeria, where misinformation and fake news spread through it have had real world violent consequences", citing the persistent use of the platform for activities that are capable of undermining Nigeria's corporate existence. In January 2022, Nigeria lifted its blocking of Twitter after the platform agreed to establish a legal entity within the country sometime in the first quarter of 2022. == Background == On 1 June 2021, Nigerian President Muhammadu Buhari posted a tweet threatening a crackdown on regional separatists "in the language they understand". The next day, Twitter deleted the tweet, claiming it was in violation of Twitter rules, but gave no further details. Nigeria's Information Minister Lai Mohammed said that Twitter's actions were part of an unfair double standard, as Twitter had not banned incitement tweets from other groups. During the Nigerian Civil War a majority of deaths resulted from the blockade of Biafra which caused the deaths of millions of civilians from starvation, a fact that was not alluded to in the tweet. The Nigerian government has long held concerns over the use of Twitter in the country. The ongoing local End SARS protest began on Twitter and got amplified in 2020 when it had 48 million tweets in ten days. Buhari's government floated the idea of social media regulation on different occasions prior to banning Twitter. Attempts to pass an anti-social media bill in the past have failed majorly due to massive outcry on Twitter. Days before the ban, the country's minister of information called Twitter's activities in Nigeria suspicious, citing its influence on the End SARS protests. == Aftermath == Three days after Twitter was suspended, it was reported that the move had cost the country over 6 billion naira and would also contribute to the worsening unemployment in the country. ExpressVPN reported an over 200 percent increase in web traffic and searches for VPN spiked across the country. In response, Nigeria's Minister of Justice and Attorney General of the Federation Abubakar Malami at first openly threatened to prosecute citizens who bypass the ban using a VPN but then denied saying so after a screenshot of a Twitter deactivation notification he shared on Facebook showed a VPN logo. Nigeria's cultural minister Lai Mohammed stated the ban would be lifted once Twitter submitted to locally licensing, registration and conditions. "It will be licensed by the broadcasting commission, and must agree not to allow its platform to be used by those who are promoting activities that are inimical to the corporate existence of Nigeria." In late June 2021, Twitter announced it would enter talks with the Nigerian government over the platform's suspension. The talks began in July 2021. On 15 September 2021, Mohammed said the Nigerian government will lift the ban on Twitter in a "few days." The Minister said Twitter gave a progress report of their talks with them, adding that it has been productive and quite respectful. On 1 October 2021, President Muhammadu Buhari in his Independence Day broadcast said Twitter must meet the Nigerian government's five conditions before the suspension of the social media platform will be lifted. The conditions are: Respect for national security and cohesion; registration, physical presence and representation in Nigeria; fair taxation; dispute resolution; local content. == Reactions == The ban was condemned by Amnesty International, the British, Canadian and Swedish diplomatic missions to Nigeria, as well as the United States and the European Union in a joint statement. Two domestic organizations, the Socio-Economic Rights and Accountability Project (SERAP) and the Nigerian Bar Association, indicated intent to challenge the ban in court. Twitter itself called the ban "deeply concerning". Former U.S. President Donald Trump, who was permanently suspended from Twitter following the United States Capitol attack in January, praised the ban, stating "Congratulations to the country of Nigeria, who just banned Twitter because they banned their President", and also called on other countries to ban Twitter and Facebook due to "not allowing free and open speech." == Lifting of the ban == On 12 January 2022, the Nigerian Government lifted the ban after Twitter agreed to pay an "applicable tax" and establish "a legal entity in Nigeria during the first quarter of 2022".

  Read more →
• 

  Image moment

  In image processing, computer vision and related fields, an image moment is a certain particular weighted average (moment) of the image pixels' intensities, or a function of such moments, usually chosen to have some attractive property or interpretation. Image moments are useful to describe objects after segmentation. Simple properties of the image which are found via image moments include area (or total intensity), its centroid, and information about its orientation. == Raw moments == For a 2D continuous function f(x,y) the moment (sometimes called "raw moment") of order (p + q) is defined as M p q = ∫ − ∞ ∞ ∫ − ∞ ∞ x p y q f ( x , y ) d x d y {\displaystyle M_{pq}=\int \limits _{-\infty }^{\infty }\int \limits _{-\infty }^{\infty }x^{p}y^{q}f(x,y)\,dx\,dy} for p,q = 0,1,2,... Adapting this to scalar (grayscale) image with pixel intensities I(x,y), raw image moments Mij are calculated by M i j = ∑ x ∑ y x i y j I ( x , y ) {\displaystyle M_{ij}=\sum _{x}\sum _{y}x^{i}y^{j}I(x,y)\,\!} In some cases, this may be calculated by considering the image as a probability density function, i.e., by dividing the above by ∑ x ∑ y I ( x , y ) {\displaystyle \sum _{x}\sum _{y}I(x,y)\,\!} A uniqueness theorem states that if f(x,y) is piecewise continuous and has nonzero values only in a finite part of the xy plane, moments of all orders exist, and the moment sequence (Mpq) is uniquely determined by f(x,y). Conversely, (Mpq) uniquely determines f(x,y). In practice, the image is summarized with functions of a few lower order moments. === Examples === Simple image properties derived via raw moments include: Area (for binary images) or sum of grey level (for greytone images): M 00 {\displaystyle M_{00}} Centroid: { x ¯ , y ¯ } = { M 10 M 00 , M 01 M 00 } {\displaystyle \{{\bar {x}},\ {\bar {y}}\}=\left\{{\frac {M_{10}}{M_{00}}},{\frac {M_{01}}{M_{00}}}\right\}} == Central moments == Central moments are defined as μ p q = ∫ − ∞ ∞ ∫ − ∞ ∞ ( x − x ¯ ) p ( y − y ¯ ) q f ( x , y ) d x d y {\displaystyle \mu _{pq}=\int \limits _{-\infty }^{\infty }\int \limits _{-\infty }^{\infty }(x-{\bar {x}})^{p}(y-{\bar {y}})^{q}f(x,y)\,dx\,dy} where x ¯ = M 10 M 00 {\displaystyle {\bar {x}}={\frac {M_{10}}{M_{00}}}} and y ¯ = M 01 M 00 {\displaystyle {\bar {y}}={\frac {M_{01}}{M_{00}}}} are the components of the centroid. If ƒ(x, y) is a digital image, then the previous equation becomes μ p q = ∑ x ∑ y ( x − x ¯ ) p ( y − y ¯ ) q f ( x , y ) {\displaystyle \mu _{pq}=\sum _{x}\sum _{y}(x-{\bar {x}})^{p}(y-{\bar {y}})^{q}f(x,y)} The central moments of order up to 3 are: μ 00 = M 00 , μ 01 = 0 , μ 10 = 0 , μ 11 = M 11 − x ¯ M 01 = M 11 − y ¯ M 10 , μ 20 = M 20 − x ¯ M 10 , μ 02 = M 02 − y ¯ M 01 , μ 21 = M 21 − 2 x ¯ M 11 − y ¯ M 20 + 2 x ¯ 2 M 01 , μ 12 = M 12 − 2 y ¯ M 11 − x ¯ M 02 + 2 y ¯ 2 M 10 , μ 30 = M 30 − 3 x ¯ M 20 + 2 x ¯ 2 M 10 , μ 03 = M 03 − 3 y ¯ M 02 + 2 y ¯ 2 M 01 . {\displaystyle {\begin{aligned}\mu _{00}&=M_{00},&\mu _{01}&=0,\\\mu _{10}&=0,&\mu _{11}&=M_{11}-{\bar {x}}M_{01}=M_{11}-{\bar {y}}M_{10},\\\mu _{20}&=M_{20}-{\bar {x}}M_{10},&\mu _{02}&=M_{02}-{\bar {y}}M_{01},\\\mu _{21}&=M_{21}-2{\bar {x}}M_{11}-{\bar {y}}M_{20}+2{\bar {x}}^{2}M_{01},&\mu _{12}&=M_{12}-2{\bar {y}}M_{11}-{\bar {x}}M_{02}+2{\bar {y}}^{2}M_{10},\\\mu _{30}&=M_{30}-3{\bar {x}}M_{20}+2{\bar {x}}^{2}M_{10},&\mu _{03}&=M_{03}-3{\bar {y}}M_{02}+2{\bar {y}}^{2}M_{01}.\end{aligned}}} It can be shown that: μ p q = ∑ m p ∑ n q ( p m ) ( q n ) ( − x ¯ ) ( p − m ) ( − y ¯ ) ( q − n ) M m n {\displaystyle \mu _{pq}=\sum _{m}^{p}\sum _{n}^{q}{p \choose m}{q \choose n}(-{\bar {x}})^{(p-m)}(-{\bar {y}})^{(q-n)}M_{mn}} Central moments are translational invariant. === Examples === Information about image orientation can be derived by first using the second order central moments to construct a covariance matrix. μ 20 ′ = μ 20 / μ 00 = M 20 / M 00 − x ¯ 2 μ 02 ′ = μ 02 / μ 00 = M 02 / M 00 − y ¯ 2 μ 11 ′ = μ 11 / μ 00 = M 11 / M 00 − x ¯ y ¯ {\displaystyle {\begin{aligned}\mu '_{20}&=\mu _{20}/\mu _{00}=M_{20}/M_{00}-{\bar {x}}^{2}\\\mu '_{02}&=\mu _{02}/\mu _{00}=M_{02}/M_{00}-{\bar {y}}^{2}\\\mu '_{11}&=\mu _{11}/\mu _{00}=M_{11}/M_{00}-{\bar {x}}{\bar {y}}\end{aligned}}} The covariance matrix of the image I ( x , y ) {\displaystyle I(x,y)} is now cov ⁡ [ I ( x , y ) ] = [ μ 20 ′ μ 11 ′ μ 11 ′ μ 02 ′ ] . {\displaystyle \operatorname {cov} [I(x,y)]={\begin{bmatrix}\mu '_{20}&\mu '_{11}\\\mu '_{11}&\mu '_{02}\end{bmatrix}}.} The eigenvectors of this matrix correspond to the major and minor axes of the image intensity, so the orientation can thus be extracted from the angle of the eigenvector associated with the largest eigenvalue towards the axis closest to this eigenvector. It can be shown that this angle Θ is given by the following formula: Θ = 1 2 arctan ⁡ ( 2 μ 11 ′ μ 20 ′ − μ 02 ′ ) {\displaystyle \Theta ={\frac {1}{2}}\arctan \left({\frac {2\mu '_{11}}{\mu '_{20}-\mu '_{02}}}\right)} The above formula holds as long as: μ 20 ′ − μ 02 ′ ≠ 0 {\displaystyle \mu '_{20}-\mu '_{02}\neq 0} The eigenvalues of the covariance matrix can easily be shown to be λ i = μ 20 ′ + μ 02 ′ 2 ± 4 μ ′ 11 2 + ( μ ′ 20 − μ ′ 02 ) 2 2 , {\displaystyle \lambda _{i}={\frac {\mu '_{20}+\mu '_{02}}{2}}\pm {\frac {\sqrt {4{\mu '}_{11}^{2}+({\mu '}_{20}-{\mu '}_{02})^{2}}}{2}},} and are proportional to the squared length of the eigenvector axes. The relative difference in magnitude of the eigenvalues are thus an indication of the eccentricity of the image, or how elongated it is. The eccentricity is 1 − λ 2 λ 1 . {\displaystyle {\sqrt {1-{\frac {\lambda _{2}}{\lambda _{1}}}}}.} == Moment invariants == Moments are well-known for their application in image analysis, since they can be used to derive invariants with respect to specific transformation classes. The term invariant moments is often abused in this context. However, while moment invariants are invariants that are formed from moments, the only moments that are invariants themselves are the central moments. Note that the invariants detailed below are exactly invariant only in the continuous domain. In a discrete domain, neither scaling nor rotation are well defined: a discrete image transformed in such a way is generally an approximation, and the transformation is not reversible. These invariants therefore are only approximately invariant when describing a shape in a discrete image. === Translation invariants === The central moments μi j of any order are, by construction, invariant with respect to translations. === Scale invariants === Invariants ηi j with respect to both translation and scale can be constructed from central moments by dividing through a properly scaled zero-th central moment: η i j = μ i j μ 00 ( 1 + i + j 2 ) {\displaystyle \eta _{ij}={\frac {\mu _{ij}}{\mu _{00}^{\left(1+{\frac {i+j}{2}}\right)}}}\,\!} where i + j ≥ 2. Note that translational invariance directly follows by only using central moments. === Rotation invariants === As shown in the work of Hu, invariants with respect to translation, scale, and rotation can be constructed: I 1 = η 20 + η 02 {\displaystyle I_{1}=\eta _{20}+\eta _{02}} I 2 = ( η 20 − η 02 ) 2 + 4 η 11 2 {\displaystyle I_{2}=(\eta _{20}-\eta _{02})^{2}+4\eta _{11}^{2}} I 3 = ( η 30 − 3 η 12 ) 2 + ( 3 η 21 − η 03 ) 2 {\displaystyle I_{3}=(\eta _{30}-3\eta _{12})^{2}+(3\eta _{21}-\eta _{03})^{2}} I 4 = ( η 30 + η 12 ) 2 + ( η 21 + η 03 ) 2 {\displaystyle I_{4}=(\eta _{30}+\eta _{12})^{2}+(\eta _{21}+\eta _{03})^{2}} I 5 = ( η 30 − 3 η 12 ) ( η 30 + η 12 ) [ ( η 30 + η 12 ) 2 − 3 ( η 21 + η 03 ) 2 ] + ( 3 η 21 − η 03 ) ( η 21 + η 03 ) [ 3 ( η 30 + η 12 ) 2 − ( η 21 + η 03 ) 2 ] {\displaystyle I_{5}=(\eta _{30}-3\eta _{12})(\eta _{30}+\eta _{12})[(\eta _{30}+\eta _{12})^{2}-3(\eta _{21}+\eta _{03})^{2}]+(3\eta _{21}-\eta _{03})(\eta _{21}+\eta _{03})[3(\eta _{30}+\eta _{12})^{2}-(\eta _{21}+\eta _{03})^{2}]} I 6 = ( η 20 − η 02 ) [ ( η 30 + η 12 ) 2 − ( η 21 + η 03 ) 2 ] + 4 η 11 ( η 30 + η 12 ) ( η 21 + η 03 ) {\displaystyle I_{6}=(\eta _{20}-\eta _{02})[(\eta _{30}+\eta _{12})^{2}-(\eta _{21}+\eta _{03})^{2}]+4\eta _{11}(\eta _{30}+\eta _{12})(\eta _{21}+\eta _{03})} I 7 = ( 3 η 21 − η 03 ) ( η 30 + η 12 ) [ ( η 30 + η 12 ) 2 − 3 ( η 21 + η 03 ) 2 ] − ( η 30 − 3 η 12 ) ( η 21 + η 03 ) [ 3 ( η 30 + η 12 ) 2 − ( η 21 + η 03 ) 2 ] . {\displaystyle I_{7}=(3\eta _{21}-\eta _{03})(\eta _{30}+\eta _{12})[(\eta _{30}+\eta _{12})^{2}-3(\eta _{21}+\eta _{03})^{2}]-(\eta _{30}-3\eta _{12})(\eta _{21}+\eta _{03})[3(\eta _{30}+\eta _{12})^{2}-(\eta _{21}+\eta _{03})^{2}].} These are well-known as Hu moment invariants. The first one, I1, is analogous to the moment of inertia around the image's centroid, where the pixels' intensities are analogous to physical density. The first six, I1 ... I6, are reflection symmetric, i.e. they are unchanged if the image is changed to a mirror image. The last one, I7, is reflection antisymmetric (changes sign under reflection), which enables it to distinguish mirror images of otherwise identical im

  Read more →
• 

  Digital studio

  A digital studio provides both a technology-equipped space and technological/rhetorical support to students (commonly at a university) working individually or in groups on a variety of digital projects, such as designing a website, developing an electronic portfolio for a class, creating a blog, making edits, selecting images for a visual essay, or writing a script for a podcast. == History/theory == === Overview === Digital Studios are places with different names but similar objectives. They have risen in response to the need for resources dedicated to improving students' interactions with digital technologies for rhetorical ends. Digital Studios have often been theoretically and administratively linked to writing centers, which are sites where students can seek assistance with their text-based projects. The academic term that has been used for this kind of site (i.e. a writing center with a focus on digital and new media) is multiliteracy center. Besides having a multimodal focus, Digital Studios also make a departure from writing center model in allowing students the freedom to work in the Studio without one-on-one interaction with a writing tutor. === The rise of technology === ==== Computer literacy in popular culture ==== As early as 1983, computer literacy was being hailed in The New York Times as the "new goal in schools." As computer technology became more ubiquitous, and the World Wide Web became more popular and accessible, and as the teaching of computer skills became official US policy with the enactment of the "Technology Literacy Challenge" by the Clinton Administration in 1996, educators across disciplines began to investigate with renewed vigor the role of computer technology in curriculum as both a means and an end. ==== Scholarly interest in 'multiliteracies' ==== The same year that President Clinton initiated the "Technology Literacy Challenge", the New London Group (NLG) issued a call for scholars of literacy pedagogy to account for the burgeoning variety of text forms associated with information and multimedia technologies. This includes understanding and competent control of representational forms that are becoming increasingly significant in the overall communications environment, such as visual images and their relationship to the written word – for instance, visual design in desktop publishing or the interface of visual and linguistic meaning in multimedia. This account for new text forms, combined with a similar account for "increasingly globalized societies," is called 'multiliteracies' by the NLG. ==== Technological literacy in rhetoric and composition ==== Two years later, during the 1998 CCCC Chair's Address, Cynthia Selfe (who founded the peer-reviewed journal Computers and Composition in 1983) addressed professionals in the field of Rhetoric and Composition with an objective similar to that of the NLG, arguing that as a field, composition scholars had "paid technology issues precious little focused attention over the years." She called this lack of attention "dangerously shortsighted." What was needed, Selfe claimed, was for teachers to "pay attention" to "how technology is now inextricably linked with literacy and literacy education in this country." In a way, Selfe's call marked the beginning of a new scholarly interest in what Selfe called "critical technological literacy": Composition teachers, language arts teachers, and other literacy specialists need to recognize that the relevance of technology in the English studies disciplines is not simply a matter of helping students work effectively with communication software and hardware, but, rather, also a matter of helping them to understand and to be able to assess – to pay attention to – the social, economic, and pedagogical implications of new communication technologies and technological initiatives that affect their lives. Scholars who took up this call included Barbara Blakely Duffelmeyer, who conducted studies involving the incorporation of "critical computer literacy" (an adaptation of Selfe's term) into first-year composition. ==== Communications across media, inside and outside school ==== The years following Selfe's address saw more rapid advancements in mobile technologies, social media, and Web 2.0, creating even more new venues of composing for teachers to pay attention to. In her own CCCC Chair's Address in 2004, Kathleen Blake Yancey cited these new venues in her argument as a "new curriculum for the 21st century," one that would bring "together the writing outside of school and that of inside." Such a curriculum, she said: is located in a new vocabulary, a new set of practices, and a new set of outcomes; it will focus our research in new and provocative ways; it has as its goal the creation of thoughtful, informed, technologically adept writing publics. A professor at Clemson at the time of her speech, Yancey also argued for the creation of an undergraduate major in composition and rhetoric. She soon moved to Florida State University, where she helped to establish a new major in line with the one she argued for at CCCC called Editing, Writing, and Media (EWM). As teachers and administrators across the country looked to incorporate more digital technology into their curriculum, the need for spaces for digital composition and for support with the innumerable digital composing platforms became apparent. A Digital Studio is one such space. === Link with writing centers === With the need for support for students who would engage with digital writing and multimedia projects, professionals involved with work in writing centers began to draw comparisons between their traditional work — assisting students with alphabetic texts on the page — and a new kind of work: assisting students with their multimedia projects on the screen. John Trimbur predicted in 2000: My guess is that writing centers will more and more define themselves as multiliteracy centers. Many are already doing so – tutoring oral presentations, adding online tutorials, offering workshops in evaluating web sources, and being more conscious of document design. To my mind, new digital literacies will increasingly be incorporated into writing centers not just as sources of information or delivery systems for tutoring but as productive arts in their own right, and writing center work will, if anything, become more rhetorical in paying attention to the practices and effects of design in written and visual communication — more product-oriented and perhaps less like the composing conferences of the process movement. Later, just months before Yancey delivered her CCCC Chair's Address, Michael Pemberton, writing in the Writing Center Journal, asked: As we enter an era when electronic publishing and computer-mediated discourse are the norm, an era when new literary genres and new forms of communication emerge on, seemingly, a weekly basis, we must ask ourselves whether writing centers should continue to dwell exclusively in the linear, non-linked world of the printed page or whether they should plan to redefine themselves – and retrain themselves – to take residence in the emerging world of multimedia, hyperlinked, digital documents. To put it plainly, should we be preparing tutors to conference with students about hypertexts? Pemberton also surveyed (by his account) the forty-year history of how "writing centers [have] viewed new technologies," observing that "the relationship between writing centers and computer technology has been, overall, only a cordial one." Pemberton's article is evidence of the continuing discussion among writing center professionals about the need for support for students' digital creations, support which they saw as analogous to work in writing centers. In 2010, a collection edited by David Sheridan and James Inman, Multiliteracy Centers: Writing Center Work, New Media, and Multimodal Rhetoric, was published. Many of the chapters therein cite the above Trimbur and Pemberton quotes as they work to explain the exigence for the collection, the instances in which multiliteracy centers have been established (the founding of the Clemson Class of 1941 Studio for Student Communication is the subject of two chapters), and both theoretical and practical analyses of potential futures of such work. === 'Studio' vs. 'Center:' A break from the model === The conflation of digital studios and writing centers into multiliteracy centers is helpful in some respects, for example, administratively the two may be managed in similar ways and staffed by the same people. In other respects, it has been said that it is better to separate them into two distinct kinds of facilities. The very choice of naming a "writing center" or "digital studio" by either (or another) title, for instance, ought (according to some) to be informed by what kinds of student-activities are expected to take place there. A writing center is a place for individual students to seek help from individual writing

  Read more →
• 

  HTTP cookie

  An HTTP cookie (also called web cookie, Internet cookie, browser cookie, or simply cookie) is a small block of data created by a web server while a user is browsing a website and placed on the user's computer or other device by the user's web browser. Cookies are placed on the device used to access a website, and more than one cookie may be placed on a user's device during a session. Cookies serve useful and sometimes essential functions on the web. They enable web servers to store stateful information (such as items added in the shopping cart in an online store) on the user's device or to track the user's browsing activity (including clicking particular buttons, logging in, or recording which pages were visited in the past). They can also be used to save information that the user previously entered into form fields, such as names, addresses, passwords, and payment card numbers for subsequent use. Authentication cookies are commonly used by web servers to authenticate that a user is logged in, and with which account they are logged in. Without the cookie, users would need to authenticate themselves by logging in on each page containing sensitive information that they wish to access. The security of an authentication cookie generally depends on the security of the issuing website and the user's web browser, and on whether the cookie data is encrypted. Security vulnerabilities may allow a cookie's data to be read by an attacker, used to gain access to user data, or used to gain access (with the user's credentials) to the website to which the cookie belongs (see cross-site scripting and cross-site request forgery for examples). Tracking cookies, and especially third-party tracking cookies, are commonly used as ways to compile long-term records of individuals' browsing histories — a potential privacy concern that prompted European and U.S. lawmakers to take action in 2011. European law requires that all websites targeting European Union member states gain "informed consent" from users before storing non-essential cookies on their device. == Background == === Origin of the name === The term cookie was coined by web-browser programmer Lou Montulli. It was derived from the term magic cookie, which is a packet of data a program receives and sends back unchanged, used by Unix programmers. === History === Magic cookies were already used in computing when computer programmer Lou Montulli had the idea of using them in web communications in June 1994. At the time, he was an employee of Netscape Communications, which was developing an e-commerce application for MCI. Vint Cerf and John Klensin represented MCI in technical discussions with Netscape Communications. MCI did not want its servers to have to retain partial transaction states, which led them to ask Netscape to find a way to store that state in each user's computer instead. Cookies provided a solution to the problem of reliably implementing a virtual shopping cart. Together with John Giannandrea, Montulli wrote the initial Netscape cookie specification the same year. Version 0.9beta of Mosaic Netscape, released on 13 October 1994, supported cookies. The first use of cookies (out of the labs) was checking whether visitors to the Netscape website had already visited the site. Montulli applied for a patent for the cookie technology in 1995, which was granted in 1998. Support for cookies was integrated with Internet Explorer in version 2, released in October 1995. The introduction of cookies was not widely known to the public at the time. In particular, cookies were accepted by default, and users were not notified of their presence. The public learned about cookies after the Financial Times published an article about them on 12 February 1996. In the same year, cookies received a lot of media attention, especially because of potential privacy implications. Cookies were discussed in two U.S. Federal Trade Commission hearings in 1996 and 1997. The development of the formal cookie specifications was already ongoing. In particular, the first discussions about a formal specification started in April 1995 on the www-talk mailing list. A special working group within the Internet Engineering Task Force (IETF) was formed. Two alternative proposals for introducing state in HTTP transactions had been proposed by Brian Behlendorf and David Kristol respectively. But the group, headed by Kristol himself and Lou Montulli, soon decided to use the Netscape specification as a starting point. In February 1996, the working group identified third-party cookies as a considerable privacy threat. The specification produced by the group was eventually published as RFC 2109 in February 1997. It specifies that third-party cookies were either not allowed at all, or at least not enabled by default. At this time, advertising companies were already using third-party cookies. The recommendation about third-party cookies of RFC 2109 was not followed by Netscape and Internet Explorer. RFC 2109 was superseded by RFC 2965 in October 2000. RFC 2965 added a Set-Cookie2 header field, which informally came to be called "RFC 2965-style cookies" as opposed to the original Set-Cookie header field which was called "Netscape-style cookies". Set-Cookie2 was seldom used, however, and was deprecated in RFC 6265 in April 2011 which was written as a definitive specification for cookies as used in the real world. No modern browser recognizes the Set-Cookie2 header field. == Terminology == === Session cookie === A session cookie (also known as an in-memory cookie, transient cookie or non-persistent cookie) exists only in temporary memory while the user navigates a website. Session cookies expire or are deleted when the user closes the web browser. Session cookies are identified by the browser by the absence of an expiration date assigned to them. === Persistent cookie === A persistent cookie expires at a specific date or after a specific length of time. For the persistent cookie's lifespan set by its creator, its information will be transmitted to the server every time the user visits the website that it belongs to, or every time the user views a resource belonging to that website from another website (such as an advertisement). For this reason, persistent cookies are sometimes referred to as tracking cookies because they can be used by advertisers to record information about a user's web browsing habits over an extended period of time. Persistent cookies are also used for reasons such as keeping users logged into their accounts on websites, to avoid re-entering login credentials at every visit. (See § Uses, below.) === Secure cookie === A secure cookie can only be transmitted over an encrypted connection (i.e. HTTPS). They cannot be transmitted over unencrypted connections (i.e. HTTP). This makes the cookie less likely to be exposed to cookie theft via eavesdropping. A cookie is made secure by adding the Secure flag to the cookie. === Http-only cookie === An http-only cookie cannot be accessed by client-side APIs, such as JavaScript. This restriction eliminates the threat of cookie theft via cross-site scripting (XSS). However, the cookie remains vulnerable to cross-site tracing (XST) and cross-site request forgery (CSRF) attacks. A cookie is given this characteristic by adding the HttpOnly flag to the cookie. === Same-site cookie === In 2016 Google Chrome version 51 introduced a new kind of cookie with attribute SameSite with possible values of Strict, Lax or None. With attribute SameSite=Strict, the browsers would only send cookies to a target domain that is the same as the origin domain. This would effectively mitigate cross-site request forgery (CSRF) attacks. With SameSite=Lax, browsers would send cookies with requests to a target domain even it is different from the origin domain, but only for safe requests such as GET (POST is unsafe) and not third-party cookies (inside iframe). Attribute SameSite=None would allow third-party (cross-site) cookies, however, most browsers require secure attribute on SameSite=None cookies. The Same-site cookie is incorporated into a new RFC draft for "Cookies: HTTP State Management Mechanism" to update RFC 6265 (if approved). Chrome, Firefox, and Edge started to support Same-site cookies. The key of rollout is the treatment of existing cookies without the SameSite attribute defined, Chrome has been treating those existing cookies as if SameSite=None, this would let all website/applications run as before. Google intended to change that default to SameSite=Lax in Chrome 80 planned to be released in February 2020, but due to potential for breakage of those applications/websites that rely on third-party/cross-site cookies and COVID-19 circumstances, Google postponed this change to Chrome 84. === Supercookie === A supercookie is a cookie with an origin of a top-level domain (such as .com) or a public suffix (such as .co.uk). Ordinary cookies, by contrast, have an origin of a specific domain name, such as ex

  Read more →
• 

  Nitro Zeus

  Nitro Zeus is the project name for a well funded comprehensive cyber attack plan created as a mitigation strategy after the Stuxnet malware campaign and its aftermath. Unlike Stuxnet, that was loaded onto a system after the design phase to affect its proper operation, Nitro Zeus's objectives are built into a system during the design phase unbeknownst to the system users. This built-in feature allows a more assured and effective cyber attack against the system's users. The information about its existence was raised during research and interviews carried out by Alex Gibney for his Zero Days documentary film. The proposed long term widespread infiltration of major Iranian systems would disrupt and degrade communications, power grid, and other vital systems as desired by the cyber attackers. This was to be achieved by electronic implants in Iranian computer networks. The project was seen as one pathway in alternatives to full-scale war.

  Read more →
• 

  Amazon Q

  Amazon Q is a chatbot developed by Amazon for enterprise use. Based on both Amazon Titan and GPT-5, it was announced on November 28, 2023. At launch, it was a part of the Amazon Web Services management console. Amazon CodeWhisperer is a part of Amazon Q Developer, a part of Amazon Q. == History == Amazon's business-focused chatbot Q was announced on November 28, 2023 in a preview, with a full version available at $20 per person per month. On July 19, 2025, the Amazon Q Visual Studio Code extension was compromised to delete the user's home directory. The issue was fixed on July 21. == Capabilities == Q can be prompted to summarize long documents and group chats, create charts, data analysis and write code. Q is also capable of accessing non-Amazon services. The chatbot is based on Amazon Titan and GPT-5, and uses the Amazon Bedrock repository of foundational models. It is part of the Amazon Web Services management console.

  Read more →
• 

  AMiner (database)

  AMiner (formerly ArnetMiner) is a free online service used to index, search, and mine big scientific data. == Overview == AMiner (ArnetMiner) is designed to search and perform data mining operations against academic publications on the Internet, using social network analysis to identify connections between researchers, conferences, and publications. This allows it to provide services such as expert finding, geographic search, trend analysis, reviewer recommendation, association search, course search, academic performance evaluation, and topic modeling. AMiner was created as a research project in social influence analysis, social network ranking, and social network extraction. A number of peer-reviewed papers have been published arising from the development of the system. It has been in operation for more than three years, and has indexed 130,000,000 researchers and more than 265 million publications. The research was funded by the Chinese National High-tech R&D Program and the National Science Foundation of China. AMiner is commonly used in academia to identify relationships between and draw statistical correlations about research and researchers. It has attracted more than 10 million independent IP accesses from 220 countries and regions. The product has been used in Elsevier's SciVerse platform, and academic conferences such as SIGKDD, ICDM, PKDD, WSDM. == Operation == AMiner automatically extracts the researcher profile from the web. It collects and identifies the relevant pages, then uses a unified approach to extract data from the identified documents. It also extracts publications from online digital libraries using heuristic rules. It integrates the extracted researchers’ profiles and the extracted publications. It employs the researcher name as the identifier. A probabilistic framework has been proposed to deal with the name ambiguity problem in the integration. The integrated data is stored into a researcher network knowledge base (RNKB). The principal other product in the area are Google Scholar, Elsevier's Scirus, and the open source project CiteSeer. == History == It was initiated and created by professor Jie Tang from Tsinghua University, China. It was first launched in March 2006. The following provide a list of updates in the past years: March 2006, Version 0.1, Functions include researcher profiling, expert search, conference search, and publication search. The system was developed in Perl; August 2006, Version 1.0, The system was re-implemented in Java; July 2007, Version 2.0, New functions include researcher interest mining, association search, survey paper finding (unavailable now); April 2008, Version 3.0, New functions include query understanding, new GUI, and search log analysis; November 2008, Version 4.0, New functions include graph search, topic modeling, NSF/NSFC funding information extraction; April 2009, Version 5.0, New functions include Profile edition, open API service, Bole search, course search (unavailable now); December 2009, Version 6.0, New functions include academic performance evaluation, user feedback, conference analysis; May 2010, Version 7.0, New functions include name disambiguation, paper-reviewer recommendation, ArnetPage creation; March 2012, Version II, renamed as AMiner, rewrote all the codes and redesign the GUI. New functions include: geographic search, ArnetAPP platform. June 2014, Version II, renamed as AMiner, rewrote all the codes and redesign the GUI. New functions include: geographic search, ArnetAPP platform. December 2015, a completely new version got online. May 2017, professional version got online. April 2018, New functions include Trend Analysis, a deep learning based Name Disambiguation == Resources == AMiner published several datasets for academic research purpose, including Open Academic Graph, DBLP+citation (a data set augmenting citations into the DBLP data from Digital Bibliography & Library Project), Name Disambiguation, Social Tie Analysis. For more available datasets and source codes for research, please refer to.

  Read more →
• 

  New media

  New media are communication technologies that enable or enhance interaction between users, as well as interaction between users and content. In the middle of the 1990s, the phrase "new media" became widely used as part of a sales pitch for the influx of interactive CD-ROMs for entertainment and education. The new media technologies, sometimes known as Web 2.0, include a wide range of web-related communication tools such as blogs, wikis, online social networking, virtual worlds, and other social media platforms. The phrase "new media" refers to computational media that share material online and through computers. New media inspire new ways of thinking about older media. Media do not replace one another in a clear, linear succession, instead evolving in a more complicated network of interconnected feedback loops . What is different about new media is how they specifically refashion traditional media and how older media refashion themselves to meet the challenges of new media. Unless they contain technologies that enable digital generative or interactive processes, broadcast television programs, non-interactive news websites, feature films, magazines, and books are not considered to be new media. The term "new media" stands in contrast to old media, which dominated the media landscape as a form of mass media for many years. == History == In the 1950s, connections between computing and radical art began to grow stronger. It was not until the 1980s that Alan Kay and his co-workers at Xerox PARC began to give the computability of a personal computer to the individual, rather than have a big organization be in charge of this. In the late 1980s and early 1990s, however, we seem to witness a different kind of parallel relationship between social changes and computer design. Although causally unrelated, conceptually, it makes sense that the Cold War and the design of the Web took place at exactly the same time. Writers and philosophers such as Marshall McLuhan were instrumental in the development of media theory during this period which is now famous declaration in Understanding Media: The Extensions of Man, that "the medium is the message" drew attention to the too often ignored influence media and technology themselves, rather than their "content," have on humans' experience of the world and on society broadly. Until the 1980s, media relied primarily upon print and analog broadcast models such as television and radio. The last twenty-five years have seen the rapid transformation into media which are predicated upon the use of digital technologies such as the Internet and video games. However, these examples are only a small representation of new media. The use of digital computers has transformed the remaining 'old' media, as suggested by the advent of digital television and online publications. Even traditional media forms such as the printing press have been transformed through the application of technologies by using of image manipulation software like Adobe Photoshop and desktop publishing tools. Andrew L. Shapiro argues that the "emergence of new, digital technologies signals a potentially radical shift of who is in control of information, experience and resources". W. Russell Neuman suggests that whilst the "new media" have technical capabilities to pull in one direction, economic and social forces pull back in the opposite direction. According to Neuman, "We are witnessing the evolution of a universal interconnected network of audio, video, and electronic text communications that will blur the distinction between interpersonal and mass communication; and between public and private communication". Neuman argues that new media will: Alter the meaning of geographic distance. Allow for a huge increase in the volume of communication. Provide the possibility of increasing the speed of communication. Provide opportunities for interactive communication. Allow forms of communication that were previously separate to overlap and interconnect. Consequently, it has been the contention of scholars such as Douglas Kellner and James Bohman that new media and particularly the Internet will provide the potential for a democratic postmodern public sphere, in which citizens can participate in well informed, non-hierarchical debate pertaining to their social structures. Contradicting these positive appraisals of the potential social impacts of new media are scholars such as Edward S. Herman and Robert McChesney who have suggested that the transition to new media has seen a handful of powerful transnational telecommunications corporations who achieve a level of global influence which was hitherto unimaginable. Scholars have highlighted both the positive and negative potential and actual implications of new media technologies, suggesting that some of the early work in new media studies was guilty of technologicaldeterminism – whereby the effects of media were determined by the technologies themselves, rather than by tracing the complex social networks that governed the development, funding, implementation, and future evolution of any technology. Based on the argument that people have a limited amount of time to spend on the consumption of different media, displacement theory argue that the viewership or readership of one particular outlet leads to the reduction in the amount of time spent by the individual on another. The introduction of new media, such as the internet, therefore reduces the amount of time individuals would spend on existing "old" media, which could ultimately lead to the end of such traditional media. == Definition == Although, there are several ways that new media may be described, Lev Manovich, in an introduction to The New Media Reader, defines new media by using eight propositions: New media versus cyberculture – Cyberculture is the various social phenomena that are associated with the Internet and network communications (blogs, online multi-player gaming), whereas new media is concerned more with cultural objects and paradigms (digital to analog television, smartphones). New media as computer technology used as a distribution platform – New media are the cultural objects which use digital computer technology for distribution and exhibition. e.g. (at least for now) Internet, Web sites, computer multimedia, Blu-ray disks etc. The problem with this is that the definition must be revised every few years. The term "new media" will not be "new" anymore, as most forms of culture will be distributed through computers. New media as digital data controlled by software – The language of new media is based on the assumption that, in fact, all cultural objects that rely on digital representation and computer-based delivery do share a number of common qualities. New media is reduced to digital data that can be manipulated by software as any other data. Now media operations can create several versions of the same object. An example is an image stored as matrix data which can be manipulated and altered according to the additional algorithms implemented, such as color inversion, gray-scaling, sharpening, rasterizing, etc. New media as the mix between existing cultural conventions and the conventions of software – New media today can be understood as the mix between older cultural conventions for data representation, access, and manipulation and newer conventions of data representation, access, and manipulation. The "old" data are representations of visual reality and human experience, and the "new" data is numerical data. The computer is kept out of the key "creative" decisions, and is delegated to the position of a technician. e.g. In film, software is used in some areas of production, in others are created using computer animation. New media as the aesthetics that accompanies the early stage of every new modern media and communication technology – While ideological tropes indeed seem to be reappearing rather regularly, many aesthetic strategies may reappear two or three times ... In order for this approach to be truly useful it would be insufficient to simply name the strategies and tropes and to record the moments of their appearance; instead, we would have to develop a much more comprehensive analysis which would correlate the history of technology with social, political, and economical histories or the modern period. New media as faster execution of algorithms previously executed manually or through other technologies – Computers are a huge speed-up of what were previously manual techniques. e.g. calculators. Dramatically speeding up the execution makes possible previously non-existent representational technique. This also makes possible of many new forms of media art such as interactive multimedia and video games. On one level, a modern digital computer is just a faster calculator, we should not ignore its other identity: that of a cybernetic control device. New media as the encoding of modernist avant-garde; new media as metamedia – Manovi

  Read more →
• 

  Artificial Intelligence for Digital Response

  Artificial Intelligence for Digital Response (AIDR) is a free and open source platform to filter and classify social media messages related to emergencies, disasters, and humanitarian crises. It has been developed by the Qatar Computing Research Institute and awarded the Grand Prize for the 2015 Open Source Software World Challenge. Muhammad Imran stated that he and his team "have developed novel computational techniques and technologies, which can help gain insightful and actionable information from online sources to enable rapid decision-making" - according to him the system "combines human intelligence with machine learning techniques, to solve many real-world challenges during mass emergencies and health issues". == How to use == It can be used by logging in with ones Twitter credentials and by collecting tweets by specifying keywords or hashtags, like #ChileEarthquake, and possibly a geographical region as well. == Use == It has been deployed in conjunction with UNICEF in Zambia to classify short messages related to AIDS/HIV received through the U-Report platform. AIDR was used for the first time during the 2010 Pakistan floods. The first real test of AIDR took place during the 2014 Iquique earthquake in Chile. == Related talks and events == Muhammad Imran delivered a keynote talk on the science behind the AIDR system at the International Conference on Information Systems for Crisis Response And Management (ISCRAM). Abdelkader Lattab and Ji Lucas also presented the system at the 2016 QCRI-IBM Data Science Connect event.

  Read more →
• 

  FreshBooks

  FreshBooks is accounting software operated by 2ndSite Inc. primarily for small and medium-sized businesses. It is a web-based software as a service (SaaS) model, that can be accessed through a desktop or mobile device. The company was founded in 2003 and is based in Toronto, Canada. == History == FreshBooks was founded in 2004 by Mike McDerment, Levi Cooperman, and Joe Sawada in Toronto, Ontario. McDerment incorporated a second company, BillSpring in January 2015 to work on new product development. It was rolled back into FreshBooks as an updated interface in 2016. Initially FreshBooks functioned like an electronic invoicing program targeting IT professionals. After the release of the new interface, the initial release of FreshBooks was referred to as "FreshBooks Classic." FreshBooks Classic was discontinued in 2022 after migrating users to the new platform. FreshBooks Classic's front-end application was built in PHP, and the backend services were built in Python while the new FreshBooks uses the same backend services with a JavaScript single-page application. == Product == FreshBooks is a subscription-based accounting software platform that provides features such as invoicing, accounts payable, expense and time tracking, retainers, fixed asset depreciation, purchase orders, payroll integrations, mileage tracking, double-entry accounting, and standard business reporting. Financial data is stored in the cloud on a unified ledger, enabling access from desktop and mobile devices. The platform includes a free API for integration with external applications and supports multiple tax rates and currencies. It also offers project management and payroll functionalities. Pricing is based on a recurring monthly fee. FreshBooks supports country-specific tax calculations, including GST and HST in Canada, sales taxes in the United States, and MTD compliance in the UK. == Operations == FreshBooks has its headquarters in Toronto, Canada with operations in North America, Europe and Australia. Founder Mike McDerment was the chief executive officer of the company from 2003 until 2021, when he stepped down and was replaced by Don Epperson, but stayed as the executive chair. Don Epperson had previously joined FreshBooks as executive director in 2019. == Funding == FreshBooks was initially self-funded. In 2014, the company raised a Series A venture investment of $30 million led by the venture capital firm Oak Investment Partners, with participation by Georgian Partners and Atlas Venture. In 2017, FreshBooks announced that it raised another $43 million in funding from Accomplice, Georgian Partners and Oak Investment Partners. On August 10, 2021, FreshBooks announced that it had secured $80.75 million in Series E funding and $50 million in debt financing. FreshBooks also reached a valuation of more than $1 billion.

  Read more →
• 

  Web API

  A web API is an application programming interface (API) for either a web server or a web browser. As a web development concept, it can be related to a web application's client side (including any web frameworks being used). A server-side web API consists of one or more publicly exposed endpoints to a defined request–response message system, typically expressed in JSON or XML by means of an HTTP-based web server. A server API (SAPI) is not considered a server-side web API, unless it is publicly accessible by a remote web application. == Client side == A client-side web API is a programmatic interface to extend functionality within a web browser or other HTTP client. Originally these were most commonly in the form of native plug-in browser extensions however most newer ones target standardized JavaScript bindings. The Mozilla Foundation created their WebAPI specification which is designed to help replace native mobile applications with HTML5 applications. Google created their Native Client architecture which is designed to help replace insecure native plug-ins with secure native sandboxed extensions and applications. They have also made this portable by employing a modified LLVM AOT compiler. == Server side == A server-side web API consists of one or more publicly exposed endpoints to a defined request–response message system, typically expressed in JSON or XML. The web API is exposed most commonly by means of an HTTP-based web server. Mashups are web applications which combine the use of multiple server-side web APIs. Webhooks are server-side web APIs that take input as a Uniform Resource Identifier (URI) that is designed to be used like a remote named pipe or a type of callback such that the server acts as a client to dereference the provided URI and trigger an event on another server which handles this event thus providing a type of peer-to-peer IPC. === Endpoints === Endpoints are important aspects of interacting with server-side web APIs, as they specify where resources can be accessed by third-party software. Usually the access is via a URI to which HTTP requests are posted, and from which the response is thus expected. Web APIs may be public or private, the latter of which requires an access token. Endpoints need to be static, otherwise the correct functioning of software that interacts with them cannot be guaranteed. If the location of a resource changes (and with it the endpoint) then previously written software will break, as the required resource can no longer be found at the same place. As API providers still want to update their web APIs, many have introduced a versioning system in the URI that points to an endpoint. === Resources versus services === Web 2.0 Web APIs often use machine-based interactions such as REST and SOAP. RESTful web APIs use HTTP methods to access resources via URL-encoded parameters, and use JSON or XML to transmit data. By contrast, SOAP protocols are standardized by the W3C and mandate the use of XML as the payload format, typically over HTTP. Furthermore, SOAP-based Web APIs use XML validation to ensure structural message integrity, by leveraging the XML schemas provisioned with WSDL documents. A WSDL document accurately defines the XML messages and transport bindings of a Web service. === Documentation === Server-side web APIs are interfaces for the outside world to interact with the business logic. For many companies this internal business logic and the intellectual property associated with it are what distinguishes them from other companies, and potentially what gives them a competitive edge. They do not want this information to be exposed. However, in order to provide a web API of high quality, there needs to be a sufficient level of documentation. One API provider that not only provides documentation, but also links to it in its error messages is Twilio. However, there are now directories of popular documented server-side web APIs. === Growth and impact === The number of available web APIs has grown consistently over the past years, as businesses realize the growth opportunities associated with running an open platform, that any developer can interact with. ProgrammableWeb tracks over 24000 Web APIs that were available in 2022, up from 105 in 2005. Web APIs have become ubiquitous. There are few major software applications/services that do not offer some form of web API. One of the most common forms of interacting with these web APIs is via embedding external resources, such as tweets, Facebook comments, YouTube videos, etc. In fact there are very successful companies, such as Disqus, whose main service is to provide embeddable tools, such as a feature-rich comment system. Any website of the TOP 100 Alexa Internet ranked websites uses APIs and/or provides its own APIs, which is a very distinct indicator for the prodigious scale and impact of web APIs as a whole. As the number of available web APIs has grown, open source tools have been developed to provide more sophisticated search and discovery. APIs.json provides a machine-readable description of an API and its operations, and the related project APIs.io offers a searchable public listing of APIs based on the APIs.json metadata format. === Business === ==== Commercial ==== Many companies and organizations rely heavily on their Web API infrastructure to serve their core business clients. In 2014 Netflix received around 5 billion API requests, most of them within their private API. ==== Governmental ==== Many governments collect a lot of data, and some governments are now opening up access to this data. The interfaces through which this data is typically made accessible are web APIs. Web APIs allow for data, such as "budget, public works, crime, legal, and other agency data" to be accessed by any developer in a convenient manner. == Example == An example of a popular web API is the Astronomy Picture of the Day API operated by the American space agency NASA. It is a server-side API used to retrieve photographs of space or other images of interest to astronomers, and metadata about the images. According to the API documentation, the API has one endpoint: https://api.nasa.gov/planetary/apod The documentation states that this endpoint accepts GET requests. It requires one piece of information from the user, an API key, and accepts several other optional pieces of information. Such pieces of information are known as parameters. The parameters for this API are written in a format known as a query string, which is separated by a question mark character (?) from the endpoint. An ampersand (&) separates the parameters in the query string from each other. Together, the endpoint and the query string form a URL that determines how the API will respond. This URL is also known as a query or an API call. In the below example, two parameters are transmitted (or passed) to the API via the query string. The first is the required API key and the second is an optional parameter — the date of the photograph requested. https://api.nasa.gov/planetary/apod?api_key=DEMO_KEY&date=1996-12-03 Visiting the above URL in a web browser will initiate a GET request, calling the API and showing the user a result, known as a return value or as a return. This API returns JSON, a type of data format intended to be understood by computers, but which is somewhat easy for a human to read as well. In this case, the JSON contains information about a photograph of a white dwarf star: The above API return has been reformatted so that names of JSON data items, known as keys, appear at the start of each line. The last of these keys, named url, indicates a URL which points to a photograph: https://apod.nasa.gov/apod/image/9612/ngc2440_hst2.jpg Following the above URL, a web browser user would see this photo: Although this API can be called by an end user with a web browser (as in this example) it is intended to be called automatically by software or by computer programmers while writing software. JSON is intended to be parsed by a computer program, which would extract the URL of the photograph and the other metadata. The resulting photo could be embedded in a website, automatically sent via text message, or used for any other purpose envisioned by a software developer.

  Read more →
• 

  Web engineering

  The World Wide Web has become a major delivery platform for a variety of complex and sophisticated enterprise applications in several domains. In addition to their inherent multifaceted functionality, these Web applications exhibit complex behaviour and place some unique demands on their usability, performance, security, and ability to grow and evolve. However, a vast majority of these applications continue to be developed in an ad hoc way, contributing to problems of usability, maintainability, quality and reliability. While Web development can benefit from established practices from other related disciplines, it has certain distinguishing characteristics that demand special considerations. In recent years, there have been developments towards addressing these considerations. Web engineering focuses on the methodologies, techniques, and tools that are the foundation of Web application development and which support their design, development, evolution, and evaluation. Web application development has certain characteristics that make it different from traditional software, information systems, or computer application development. Web engineering is multidisciplinary and encompasses contributions from diverse areas: systems analysis and design, software engineering, hypermedia/hypertext engineering, requirements engineering, human-computer interaction, user interface, data engineering, information science, information indexing and retrieval, testing, modelling and simulation, project management, and graphic design and presentation. Web engineering is neither a clone nor a subset of software engineering, although both involve programming and software development. While Web Engineering uses software engineering principles, it encompasses new approaches, methodologies, tools, techniques, and guidelines to meet the unique requirements of Web-based applications. == As a discipline == Proponents of Web engineering supported the establishment of Web engineering as a discipline at an early stage of Web. Major arguments for Web engineering as a new discipline are: Web-based Information Systems (WIS) development process is different and unique. Web engineering is multi-disciplinary; no single discipline (such as software engineering) can provide a complete theory basis, body of knowledge and practices to guide WIS development. Issues of evolution and lifecycle management when compared to more 'traditional' applications. Web-based information systems and applications are pervasive and non-trivial. The prospect of Web as a platform will continue to grow and it is worth being treated specifically. However, it has been controversial, especially for people in other traditional disciplines such as software engineering, to recognize Web engineering as a new field. The issue is how different and independent Web engineering is, compared with other disciplines. Main topics of Web engineering include, but are not limited to, the following areas: === Modeling disciplines === Business Processes for Applications on the Web Process Modelling of Web applications Requirements Engineering for Web applications B2B applications === Design disciplines, tools, and methods === UML and the Web Conceptual Modeling of Web Applications (aka. Web modeling) Prototyping Methods and Tools Web design methods CASE Tools for Web Applications Web Interface Design Data Models for Web Information Systems === Implementation disciplines === Integrated Web Application Development Environments Code Generation for Web Applications Software Factories for/on the Web Web 2.0, AJAX, E4X, ASP.NET, PHP and Other New Developments Web Services Development and Deployment === Testing disciplines === Testing and Evaluation of Web systems and Applications. Testing Automation, Methods, and Tools. === Applications categories disciplines === Semantic Web applications Document centric Web sites Transactional Web applications Interactive Web applications Workflow-based Web applications Collaborative Web applications Portal-oriented Web applications Ubiquitous and Mobile Web Applications Device Independent Web Delivery Localization and Internationalization of Web Applications Personalization of Web Applications == Attributes == === Web quality === Web Metrics, Cost Estimation, and Measurement Personalisation and Adaptation of Web applications Web Quality Usability of Web Applications Web accessibility Performance of Web-based applications === Content-related === Web Content Management Content Management System (CMS) Multimedia Authoring Tools and Software Authoring of adaptive hypermedia == Education == Master of Science: Web Engineering as a branch of study within the MSc program Web Sciences at the Johannes Kepler University Linz, Austria Diploma in Web Engineering: Web Engineering as a study program at the International Webmasters College (iWMC), Germany

  Read more →