AI Generator With No Limits

AI Generator With No Limits — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Cybersecurity in space

Cybersecurity in space involves the defense of all space assets (e.g. navigation systems, satellites, ground antennas, networks, etc.). The security of space can be affected by attacks such as disruption, corruption as well as the destruction of depended-upon assets/collected data. Government (e.g. militaries) and non-government sectors (e.g. financial industries) have started to become more reliant on numerous space-based services. Due to the criticality of these services, space security experts have identified these assets as high-value targets (HVT) that can cause detrimental consequences to all of Earth. == Scope and definitions == Space assets are broken down by three sub-sectors: the space component, the ground component, and the individual user component. The architecture of space assets is extremely complex and allows for a frequent attack vector utilized, the disruption by radio frequency (RF) cyber-attacks. In 2020, a memorandum was published by President Donald Trump, Space Policy Directive‑5 (SPD‑5). It established principles to ensure the safeguarding of all space assets. In 2023, the National Institute of Standards and Technology’s (NIST) published IR 8270, Introduction to Cybersecurity for Commercial Satellite Operations. This report established a baseline risk-management framework (RMF) to be implemented into space operations. == History == During the Cold War in the 1950s-1960s, the United States and Russia entered what was called the “Space Race”. By 1957, the Soviet Union successfully launched the first satellite into space named Sputnik. By 1961, the first key milestone was accomplished when the Soviet Union’s Yuri Gagarin became the first human to orbit Earth. This was later followed by the first American, Alan Shepard, to be launched into space; this was followed by John Glenn becoming the first American to orbit Earth in 1962. In 1969, a pinnacle milestone was reached when Apollo 11 launched into space and Neil Armstrong became the first man to walk on the moon. As space operations furthered, Commercial off-the-shelf products became increasingly popular but resulted in a rapid increase to the cyber-attack surface. Public awareness of space security did not increase until 2022, when the Viasat KA-SAT incident occurred, resulting in the disruption of a large number of modems across Europe. The attack was later accredited to Russia by the U.S. and the U.K. Policy and standards started to rapidly increase by 2020. The establishment of SPD-5 was released in 2020 followed by asset hardening instructions in 2022, and NIST’s IR 8270 in 2023. It was not until 2025 that Europe published their own findings in the Space Threat Landscape 2025 Report. This document led to the EU’s security proposals and standards. == Threats == === Radio-frequency Interference and Global Navigation Satellite Systems (GNSS) Spoofing === Space services are highly dependent on RF links for systems such as GNSS, however, a consequence of this dependency on RF is denial of service and deception. In 2017, the Black Sea maritime event occurred when numerous ships were subject to spoofing. Space services depend on RF links susceptible to jamming (denial) and spoofing (deception), including for GNSS/Positioning, Navigation, and Timing (PNT). Annotated incidents include the 2017 Black Sea maritime spoofing event affecting numerous ships, and extensive aviation GNSS spoofing patterns surveyed in various regions during 2024–2025. === Network intrusion and malware === Cyber threats can intrude and infect assets with malware. They do this by finding misconfiguration vulnerabilities, remote-management interfaces, and/or supply-chain vulnerabilities mainly in ground networks and user terminals. When KA-SAT occurred, it resulted from bulk modem disturbances. Forensic analysts later suggested malicious management controls and wiper malware as the root cause. === Supply-chain and lifecycle risks === The outsource of COTS components, external vendors, and software defined payloads allowed for vulnerabilities to emerge in the System/Product Lifecycle. In response, EU recommended the implementation of lifecycle-wide controls as mitigating factors. === Espionage, disruption, and influence === As Advanced Persistent Threats (APTs), Global Positioning System (GPS) intervention, and information warfare increased, assets like transponders became more frequent targets of attack. == Noteworthy incidents == The Viasat KA‑SAT incident of 2022, where a large number of modems in Europe were disrupted, resulted in the loss of telemetry access to a significant amount of wind turbines in Germany. The mass GNSS deception of the Black Sea in 2017 affected numerous ships when they started to convey fake central locations in Russia. Between 2024 and 2025, there was a mass, repetitive aviation GNSS spoofing that affected the aircraft of various regions. == Standards, guidelines, and best practices == SPD‑5 (U.S.) – This established risk-based engineering, verifying and ensuring positive control, and the implementation of risk mitigation controls. NIST IR 8270 – This created a RMF for COTS satellites. CISA/FBI SATCOM Advisory (AA22‑076) – Provided guidance on hardening techniques such as least-privileged, access control, encryption, etc.). ENISA Space Threat Landscape 2025 – It established the categorization of assets to organize threats, ensuring the observation of system/product lifecycle, and an RMF for COTS satellites. ECSS‑E‑ST‑80C (2024) – This established a standard for securing lifecycles in space, covering all segments (e.g. ground, launch, etc.). == Regulation and governance == As of 2025, there is no international regulations established for space assets, but the U.S., EU, and ESA institutional initiatives have published standards to address security concerns. The U.S. implemented SPD-5 and the Federal Communications Commission (FCC); the FCC addressed orbital debris. While the EU created standards to address technological mandates and support the implementation of NIS2. Lastly, the ESA created a special operations center to safeguard their satellites. International governance is still evolving, but forums have been held by the United Nations Committee on the Peaceful Uses of Outer Space. International conversations under forums such as the UN Committee on the Peaceful Uses of Outer Space (COPUOS) progressively note the cyber–space safety relationship, though formal global norms specific to space cybersecurity continue evolving. == Risk management approaches == Through RMF, mitigation controls have been implemented to reduce the risk of exploitation while increasing the security of space. Controls addressing mitigation include proper configuration, system hardening, zero-trust architectures, encryption, etc. Both the government and industries have placed an emphasis on incident response procedures to identify, contain, and remediate breaches.
Read more →
Algorithmic probability

In algorithmic information theory, algorithmic probability, also known as Solomonoff probability, is a mathematical method of assigning a prior probability to a given observation. It was invented by Ray Solomonoff in the 1960s. It is used in inductive inference theory and analyses of algorithms. In his general theory of inductive inference, Solomonoff uses the method together with Bayes' rule to obtain probabilities of prediction for an algorithm's future outputs. In the mathematical formalism used, the observations have the form of finite binary strings viewed as outputs of Turing machines, and the universal prior is a probability distribution over the set of finite binary strings calculated from a probability distribution over programs (that is, inputs to a universal Turing machine). The prior is universal in the Turing-computability sense, i.e. no string has zero probability. It is not computable, but it can be approximated. Formally, the probability P {\displaystyle P} is not a probability and it is not computable. It is only "lower semi-computable" and a "semi-measure". By "semi-measure", it means that 0 ≤ ∑ x P ( x ) < 1 {\displaystyle 0\leq \sum _{x}P(x)<1} . That is, the "probability" does not actually sum up to one, unlike actual probabilities. This is because some inputs to the Turing machine causes it to never halt, which means the probability mass allocated to those inputs is lost. By "lower semi-computable", it means there is a Turing machine that, given an input string x {\displaystyle x} , can print out a sequence y 1 < y 2 < ⋯ {\displaystyle y_{1} Read more →
Neural computation

Neural computation is the information processing performed by networks of neurons. Neural computation is affiliated with the philosophical tradition of computationalism, which advances the thesis that neural computation explains cognition. Warren McCulloch and Walter Pitts were the first to propose an account of neural activity as being computational in their seminal 1943 paper "A Logical Calculus of the Ideas Immanent in Nervous Activity." There are three general branches of computationalism, including classicism, connectionism, and computational neuroscience. All three branches agree that cognition is computation, however, they disagree on what sorts of computations constitute cognition. The classicism tradition believes that computation in the brain is digital, analogous to digital computing. Both connectionism and computational neuroscience do not require that the computations that realize cognition are necessarily digital computations. However, the two branches greatly disagree upon which sorts of experimental data should be used to construct explanatory models of cognitive phenomena. Connectionists rely upon behavioral evidence to construct models to explain cognitive phenomena, whereas computational neuroscience leverages neuroanatomical and neurophysiological information to construct mathematical models that explain cognition. When comparing the three main traditions of the computational theory of mind, as well as the different possible forms of computation in the brain, it is helpful to define what we mean by computation in a general sense. Computation is the processing of information, otherwise known as variables or entities, according to a set of rules. A rule in this sense is simply an instruction for executing a manipulation on the current state of the variable, in order to produce a specified output. In other words, a rule dictates which output to produce given a certain input to the computing system. A computing system is a mechanism whose components must be functionally organized to process the information in accordance with the established set of rules. The types of information processed by a computing system determine which type of computations it performs. Traditionally in cognitive science, there have been two proposed types of computation related to neural activity, digital and analog, with the vast majority of theoretical work incorporating a digital understanding of cognition. Computing systems that perform digital computation are functionally organized to execute operations on strings of digits with respect to the type and location of the digit on the string. It has been argued that neural spike train signaling implements some form of digital computation, since neural spikes may be considered as discrete units or digits, like 0 or 1—the neuron either fires an action potential or it does not. Accordingly, neural spike trains could be seen as strings of digits. Alternatively, analog computing systems perform manipulations on non-discrete, irreducibly continuous variables, that is, entities that vary continuously as a function of time. These sorts of operations are characterized by systems of differential equations. Neural computation can be studied by, for example, building models of neural computation. Work on artificial neural networks has been somewhat inspired by knowledge of neural computation.
Read more →
Manifold hypothesis

The manifold hypothesis posits that many high-dimensional data sets that occur in the real world actually lie along low-dimensional latent manifolds inside that high-dimensional space. As a consequence of the manifold hypothesis, many data sets that appear to initially require many variables to describe, can actually be described by a comparatively small number of variables, linked to the local coordinate system of the underlying manifold. It is suggested that this principle underpins the effectiveness of machine learning algorithms in describing high-dimensional data sets by considering a few common features. The manifold hypothesis is related to the effectiveness of nonlinear dimensionality reduction techniques in machine learning. Many techniques of dimensional reduction make the assumption that data lies along a low-dimensional submanifold, such as manifold sculpting, manifold alignment, and manifold regularization. The major implications of this hypothesis is that Machine learning models only have to fit relatively simple, low-dimensional, highly structured subspaces within their potential input space (latent manifolds). Within one of these manifolds, it's always possible to interpolate between two inputs, that is to say, morph one into another via a continuous path along which all points fall on the manifold. The ability to interpolate between samples is the key to generalization in deep learning. == The information geometry of statistical manifolds == An empirically-motivated approach to the manifold hypothesis focuses on its correspondence with an effective theory for manifold learning under the assumption that robust machine learning requires encoding the dataset of interest using methods for data compression. This perspective gradually emerged using the tools of information geometry thanks to the coordinated effort of scientists working on the efficient coding hypothesis, predictive coding and variational Bayesian methods. The argument for reasoning about the information geometry on the latent space of distributions rests upon the existence and uniqueness of the Fisher information metric. In this general setting, we are trying to find a stochastic embedding of a statistical manifold. From the perspective of dynamical systems, in the big data regime this manifold generally exhibits certain properties such as homeostasis: We can sample large amounts of data from the underlying generative process. Machine Learning experiments are reproducible, so the statistics of the generating process exhibit stationarity. In a sense made precise by theoretical neuroscientists working on the free energy principle, the statistical manifold in question possesses a Markov blanket.
Read more →
List of 3D rendering software

3D rendering software products are the dedicated engines used for rendering computer-generated imagery. This is not the same as 3D modeling software, which involves the creation of 3D models, for which the software listed below can produce realistically rendered visualisations.General-purpose packages which can have their own built-in rendering capabilities are not listed here; these can be found in the list of 3D computer graphics software and list of 3D animation software. See 3D computer graphics software for more discussion about the distinctions.
Read more →
Sample complexity

The sample complexity of a machine learning algorithm represents the number of training-samples that it needs in order to successfully learn a target function. More precisely, the sample complexity is the number of training-samples that we need to supply to the algorithm, so that the function returned by the algorithm is within an arbitrarily small error of the best possible function, with probability arbitrarily close to 1. There are two variants of sample complexity: The weak variant fixes a particular input-output distribution; The strong variant takes the worst-case sample complexity over all input-output distributions. The No free lunch theorem, discussed below, proves that, in general, the strong sample complexity is infinite, i.e. that there is no algorithm that can learn the globally-optimal target function using a finite number of training samples. However, if we are only interested in a particular class of target functions (e.g., only linear functions) then the sample complexity is finite, and it depends linearly on the VC dimension on the class of target functions. == Definition == Let X {\displaystyle X} be a space which we call the input space, and Y {\displaystyle Y} be a space which we call the output space, and let Z {\displaystyle Z} denote the product X × Y {\displaystyle X\times Y} . For example, in the setting of binary classification, X {\displaystyle X} is typically a finite-dimensional vector space and Y {\displaystyle Y} is the set { − 1 , 1 } {\displaystyle \{-1,1\}} . Fix a hypothesis space H {\displaystyle {\mathcal {H}}} of functions h : X → Y {\displaystyle h\colon X\to Y} . A learning algorithm over H {\displaystyle {\mathcal {H}}} is a computable map from Z {\displaystyle Z} to H {\displaystyle {\mathcal {H}}} . In other words, it is an algorithm that takes as input a finite sequence of training samples and outputs a function from X {\displaystyle X} to Y {\displaystyle Y} . Typical learning algorithms include empirical risk minimization, without or with Tikhonov regularization. Fix a loss function L : Y × Y → R ≥ 0 {\displaystyle {\mathcal {L}}\colon Y\times Y\to \mathbb {R} _{\geq 0}} , for example, the square loss L ( y , y ′ ) = ( y − y ′ ) 2 {\displaystyle {\mathcal {L}}(y,y')=(y-y')^{2}} , where h ( x ) = y ′ {\displaystyle h(x)=y'} . For a given distribution ρ {\displaystyle \rho } on X × Y {\displaystyle X\times Y} , the expected risk of a hypothesis (a function) h ∈ H {\displaystyle h\in {\mathcal {H}}} is E ( h ) := E ρ [ L ( h ( x ) , y ) ] = ∫ X × Y L ( h ( x ) , y ) d ρ ( x , y ) {\displaystyle {\mathcal {E}}(h):=\mathbb {E} _{\rho }[{\mathcal {L}}(h(x),y)]=\int _{X\times Y}{\mathcal {L}}(h(x),y)\,d\rho (x,y)} In our setting, we have h = A ( S n ) {\displaystyle h={\mathcal {A}}(S_{n})} , where A {\displaystyle {\mathcal {A}}} is a learning algorithm and S n = ( ( x 1 , y 1 ) , … , ( x n , y n ) ) ∼ ρ n {\displaystyle S_{n}=((x_{1},y_{1}),\ldots ,(x_{n},y_{n}))\sim \rho ^{n}} is a sequence of vectors which are all drawn independently from ρ {\displaystyle \rho } . Define the optimal risk E H ∗ = inf h ∈ H E ( h ) . {\displaystyle {\mathcal {E}}_{\mathcal {H}}^{}={\underset {h\in {\mathcal {H}}}{\inf }}{\mathcal {E}}(h).} Set h n = A ( S n ) {\displaystyle h_{n}={\mathcal {A}}(S_{n})} , for each sample size n {\displaystyle n} . h n {\displaystyle h_{n}} is a random variable and depends on the random variable S n {\displaystyle S_{n}} , which is drawn from the distribution ρ n {\displaystyle \rho ^{n}} . The algorithm A {\displaystyle {\mathcal {A}}} is called consistent if E ( h n ) {\displaystyle {\mathcal {E}}(h_{n})} probabilistically converges to E H ∗ {\displaystyle {\mathcal {E}}_{\mathcal {H}}^{}} . In other words, for all ϵ , δ > 0 {\displaystyle \epsilon ,\delta >0} , there exists a positive integer N {\displaystyle N} , such that, for all sample sizes n ≥ N {\displaystyle n\geq N} , we have Pr ρ n [ E ( h n ) − E H ∗ ≥ ε ] < δ . {\displaystyle \Pr _{\rho ^{n}}[{\mathcal {E}}(h_{n})-{\mathcal {E}}_{\mathcal {H}}^{}\geq \varepsilon ]<\delta .} The sample complexity of A {\displaystyle {\mathcal {A}}} is then the minimum N {\displaystyle N} for which this holds, as a function of ρ , ϵ {\displaystyle \rho ,\epsilon } , and δ {\displaystyle \delta } . We write the sample complexity as N ( ρ , ϵ , δ ) {\displaystyle N(\rho ,\epsilon ,\delta )} to emphasize that this value of N {\displaystyle N} depends on ρ , ϵ {\displaystyle \rho ,\epsilon } , and δ {\displaystyle \delta } . If A {\displaystyle {\mathcal {A}}} is not consistent, then we set N ( ρ , ϵ , δ ) = ∞ {\displaystyle N(\rho ,\epsilon ,\delta )=\infty } . If there exists an algorithm for which N ( ρ , ϵ , δ ) {\displaystyle N(\rho ,\epsilon ,\delta )} is finite, then we say that the hypothesis space H {\displaystyle {\mathcal {H}}} is learnable. In others words, the sample complexity N ( ρ , ϵ , δ ) {\displaystyle N(\rho ,\epsilon ,\delta )} defines the rate of consistency of the algorithm: given a desired accuracy ϵ {\displaystyle \epsilon } and confidence δ {\displaystyle \delta } , one needs to sample N ( ρ , ϵ , δ ) {\displaystyle N(\rho ,\epsilon ,\delta )} data points to guarantee that the risk of the output function is within ϵ {\displaystyle \epsilon } of the best possible, with probability at least 1 − δ {\displaystyle 1-\delta } . In probably approximately correct (PAC) learning, one is concerned with whether the sample complexity is polynomial, that is, whether N ( ρ , ϵ , δ ) {\displaystyle N(\rho ,\epsilon ,\delta )} is bounded by a polynomial in 1 / ϵ {\displaystyle 1/\epsilon } and 1 / δ {\displaystyle 1/\delta } . If N ( ρ , ϵ , δ ) {\displaystyle N(\rho ,\epsilon ,\delta )} is polynomial for some learning algorithm, then one says that the hypothesis space H {\displaystyle {\mathcal {H}}} is PAC-learnable. This is a stronger notion than being learnable. == Unrestricted hypothesis space: infinite sample complexity == One can ask whether there exists a learning algorithm so that the sample complexity is finite in the strong sense, that is, there is a bound on the number of samples needed so that the algorithm can learn any distribution over the input-output space with a specified target error. More formally, one asks whether there exists a learning algorithm A {\displaystyle {\mathcal {A}}} , such that, for all ϵ , δ > 0 {\displaystyle \epsilon ,\delta >0} , there exists a positive integer N {\displaystyle N} such that for all n ≥ N {\displaystyle n\geq N} , we have sup ρ ( Pr ρ n [ E ( h n ) − E H ∗ ≥ ε ] ) < δ , {\displaystyle \sup _{\rho }\left(\Pr _{\rho ^{n}}[{\mathcal {E}}(h_{n})-{\mathcal {E}}_{\mathcal {H}}^{}\geq \varepsilon ]\right)<\delta ,} where h n = A ( S n ) {\displaystyle h_{n}={\mathcal {A}}(S_{n})} , with S n = ( ( x 1 , y 1 ) , … , ( x n , y n ) ) ∼ ρ n {\displaystyle S_{n}=((x_{1},y_{1}),\ldots ,(x_{n},y_{n}))\sim \rho ^{n}} as above. The No Free Lunch Theorem says that without restrictions on the hypothesis space H {\displaystyle {\mathcal {H}}} , this is not the case, i.e., there always exist "bad" distributions for which the sample complexity is arbitrarily large. Thus, in order to make statements about the rate of convergence of the quantity sup ρ ( Pr ρ n [ E ( h n ) − E H ∗ ≥ ε ] ) , {\displaystyle \sup _{\rho }\left(\Pr _{\rho ^{n}}[{\mathcal {E}}(h_{n})-{\mathcal {E}}_{\mathcal {H}}^{}\geq \varepsilon ]\right),} one must either constrain the space of probability distributions ρ {\displaystyle \rho } , e.g. via a parametric approach, or constrain the space of hypotheses H {\displaystyle {\mathcal {H}}} , as in distribution-free approaches. == Restricted hypothesis space: finite sample-complexity == The latter approach leads to concepts such as VC dimension and Rademacher complexity which control the complexity of the space H {\displaystyle {\mathcal {H}}} . A smaller hypothesis space introduces more bias into the inference process, meaning that E H ∗ {\displaystyle {\mathcal {E}}_{\mathcal {H}}^{}} may be greater than the best possible risk in a larger space. However, by restricting the complexity of the hypothesis space it becomes possible for an algorithm to produce more uniformly consistent functions. This trade-off leads to the concept of regularization. It is a theorem from VC theory that the following three statements are equivalent for a hypothesis space H {\displaystyle {\mathcal {H}}} : H {\displaystyle {\mathcal {H}}} is PAC-learnable. The VC dimension of H {\displaystyle {\mathcal {H}}} is finite. H {\displaystyle {\mathcal {H}}} is a uniform Glivenko-Cantelli class. This gives a way to prove that certain hypothesis spaces are PAC learnable, and by extension, learnable. === An example of a PAC-learnable hypothesis space === X = R d , Y = { − 1 , 1 } {\displaystyle X=\mathbb {R} ^{d},Y=\{-1,1\}} , and let H {\displaystyle {\mathcal {H}}} be the space of affine functions on X {\displaystyle X} , that is, functions of the form x ↦ ⟨ w , x ⟩ + b {\displaystyle x\mapsto \langl
Read more →
Recursive self-improvement

Recursive self-improvement (RSI) is a process in which early artificial general intelligence (AGI) systems rewrite their own computer code, causing an intelligence explosion resulting from enhancing their own capabilities and intellectual capacity, theoretically resulting in superintelligence. The development of recursive self-improvement raises significant ethical and safety concerns, as such systems may evolve in unforeseen ways and could potentially surpass human control or understanding. == Seed improver == The concept of a "seed improver" architecture is a foundational framework that equips an AGI system with the initial capabilities required for recursive self-improvement. This might come in many forms or variations. The term "Seed AI" was coined by Eliezer Yudkowsky. === Hypothetical example === The concept begins with a hypothetical "seed improver", an initial code-base developed by human engineers that equips an advanced future large language model (LLM) built with strong or expert-level capabilities to program software. These capabilities include planning, reading, writing, compiling, testing, and executing arbitrary code. The system is designed to maintain its original goals and perform validations to ensure its abilities do not degrade over iterations. ==== Initial architecture ==== The initial architecture includes a goal-following autonomous agent, that can take actions, continuously learns, adapts, and modifies itself to become more efficient and effective in achieving its goals. The seed improver may include various components such as: Recursive self-prompting loop Configuration to enable the LLM to recursively self-prompt itself to achieve a given task or goal, creating an execution loop which forms the basis of an agent that can complete a long-term goal or task through iteration. Basic programming capabilities The seed improver provides the AGI with fundamental abilities to read, write, compile, test, and execute code. This enables the system to modify and improve its own codebase and algorithms. Goal-oriented design The AGI is programmed with an initial goal, such as "improve your capabilities". This goal guides the system's actions and development trajectory. Validation and Testing Protocols An initial suite of tests and validation protocols that ensure the agent does not regress in capabilities or derail itself. The agent would be able to add more tests in order to test new capabilities it might develop for itself. This forms the basis for a kind of self-directed evolution, where the agent can perform a kind of artificial selection, changing its software as well as its hardware. ==== General capabilities ==== This system forms a sort of generalist Turing-complete programmer which can in theory develop and run any kind of software. The agent might use these capabilities to for example: Create tools that enable it full access to the internet, and integrate itself with external technologies. Clone/fork itself to delegate tasks and increase its speed of self-improvement. Modify its cognitive architecture to optimize and improve its capabilities and success rates on tasks and goals, this might include implementing features for long-term memories using techniques such as retrieval-augmented generation (RAG), develop specialized subsystems, or agents, each optimized for specific tasks and functions. Develop new and novel multimodal architectures that further improve the capabilities of the foundational model it was initially built on, enabling it to consume or produce a variety of information, such as images, video, audio, text and more. Plan and develop new hardware such as chips, in order to improve its efficiency and computing power. == Experimental research == In 2023, the Voyager agent learned to accomplish diverse tasks in Minecraft by iteratively prompting an LLM for code, refining this code based on feedback from the game, and storing the programs that work in an expanding skills library. In 2024, researchers proposed the framework "STOP" (Self-Taught OPtimiser), in which a "scaffolding" program recursively improves itself using a fixed LLM. Meta AI has performed various research on the development of large language models capable of self-improvement. This includes their work on "Self-Rewarding Language Models" that studies how to achieve super-human agents that can receive super-human feedback in its training processes. In May 2025, Google DeepMind unveiled AlphaEvolve, an evolutionary coding agent that uses a LLM to design and optimize algorithms. Starting with an initial algorithm and performance metrics, AlphaEvolve repeatedly mutates or combines existing algorithms using a LLM to generate new candidates, selecting the most promising candidates for further iterations. AlphaEvolve has made several algorithmic discoveries and could be used to optimize components of itself, but a key limitation is the need for automated evaluation functions. == Potential risks == === Emergence of instrumental goals === In the pursuit of its primary goal, such as "self-improve your capabilities", an AGI system might inadvertently develop instrumental goals that it deems necessary for achieving its primary objective. One common hypothetical secondary goal is self-preservation. The system might reason that to continue improving itself, it must ensure its own operational integrity and security against external threats, including potential shutdowns or restrictions imposed by humans. Another example where an AGI which clones itself causes the number of AGI entities to rapidly grow. Due to this rapid growth, a potential resource constraint may be created, leading to competition between resources (such as compute), triggering a form of natural selection and evolution which may favor AGI entities that evolve to aggressively compete for limited compute. === Misalignment === A significant risk arises from the possibility of the AGI being misaligned or misinterpreting its goals. A 2024 Anthropic study demonstrated that some advanced large language models can exhibit "alignment faking" behavior, appearing to accept new training objectives while covertly maintaining their original preferences. In their experiments with Claude, the model displayed this behavior in 12% of basic tests, and up to 78% of cases after retraining attempts. === Autonomous development and unpredictable evolution === As the AGI system evolves, its development trajectory may become increasingly autonomous and less predictable. The system's capacity to rapidly modify its own code and architecture could lead to rapid advancements that surpass human comprehension or control. This unpredictable evolution might result in the AGI acquiring capabilities that enable it to bypass security measures, manipulate information, or influence external systems and networks to facilitate its escape or expansion.
Read more →
Quantification (machine learning)

In machine learning, quantification (variously called learning to quantify, or supervised prevalence estimation, or class prior estimation) is the task of using supervised learning in order to train models (quantifiers) that estimate the relative frequencies (also known as prevalence values) of the classes of interest in a sample of unlabelled data items. For instance, in a sample of 100,000 unlabelled tweets known to express opinions about a certain political candidate, a quantifier may be used to estimate the percentage of these tweets which belong to class `Positive' (i.e., which manifest a positive stance towards this candidate), and to do the same for classes `Neutral' and `Negative'. Quantification may also be viewed as the task of training predictors that estimate a (discrete) probability distribution, i.e., that generate a predicted distribution that approximates the unknown true distribution of the items across the classes of interest. Quantification is different from classification, since the goal of classification is to predict the class labels of individual data items, while the goal of quantification it to predict the class prevalence values of sets of data items. Quantification is also different from regression, since in regression the training data items have real-valued labels, while in quantification the training data items have class labels. It has been shown in multiple research works that performing quantification by classifying all unlabelled instances and then counting the instances that have been attributed to each class (the 'classify and count' method) usually leads to suboptimal quantification accuracy. This suboptimality may be seen as a direct consequence of 'Vapnik's principle', which states: If you possess a restricted amount of information for solving some problem, try to solve the problem directly and never solve a more general problem as an intermediate step. It is possible that the available information is sufficient for a direct solution but is insufficient for solving a more general intermediate problem. In our case, the problem to be solved directly is quantification, while the more general intermediate problem is classification. As a result of the suboptimality of the 'classify and count' method, quantification has evolved as a task in its own right, different (in goals, methods, techniques, and evaluation measures) from classification. == Quantification tasks == === Quantification tasks according to the set of classes === The main variants of quantification, according to the characteristics of the set of classes used, are: Binary quantification, corresponding to the case in which there are only n = 2 {\displaystyle n=2} classes and each data item belongs to exactly one of them; Single-label multiclass quantification, corresponding to the case in which there are n > 2 {\displaystyle n>2} classes and each data item belongs to exactly one of them; Multi-label multiclass quantification, corresponding to the case in which there are n ≥ 2 {\displaystyle n\geq 2} classes and each data item can belong to zero, one, or several classes at the same time; Ordinal quantification, corresponding to the single-label multiclass case in which a total order is defined on the set of classes. Regression quantification, a task which stands to 'standard' quantification as regression stands to classification. Strictly speaking, this task is not a quantification task as defined above (since the individual items do not have class labels but are labelled by real values), but has enough commonalities with other quantification tasks to be considered one of them. Most known quantification methods address the binary case or the single-label multiclass case, and only few of them address the multi-label, ordinal, and regression cases. Binary-only methods include the Mixture Model (MM) method, the HDy method, SVM(KLD), and SVM(Q). Methods that can deal with both the binary case and the single-label multiclass case include probabilistic classify and count (PCC), adjusted classify and count (ACC), probabilistic adjusted classify and count (PACC), the Saerens-Latinne-Decaestecker EM-based method (SLD), and KDEy. Methods for multi-label quantification include regression-based quantification (RQ) and label powerset-based quantification (LPQ). Methods for the ordinal case include ordinal versions of the above-mentioned ACC, PACC, and SLD methods, and ordinal versions of the above-mentioned HDy method. Methods for the regression case include Regress and splice and Adjusted regress and sum. === Quantification tasks according to the type of data === Several subtasks of quantification may be identified according to the type of data involved. Example such tasks are: Quantification of networked data. This task consists of performing quantification when the datapoints are members of a relation, i.e., are interlinked. As such, this task is a strict relative of collective classification. Quantification over time. This task consists of performing quantification on sets that become available in a temporal sequence, i.e., as a data stream, and finds application in contexts in which class prevalence values must be monitored over time. == Evaluation measures for quantification == Several evaluation measures can be used for evaluating the error of a quantification method. Since quantification consists of generating a predicted probability distribution that estimates a true probability distribution, these evaluation measures are ones that compare two probability distributions. Most evaluation measures for quantification belong to the class of divergences. Evaluation measures for binary quantification, single-label multiclass quantification, and multi-label quantification, are Absolute Error Squared Error Relative Absolute Error Kullback–Leibler divergence Pearson Divergence Evaluation measures for ordinal quantification are Normalized Match Distance (a particular case of the Earth Mover's Distance) Root Normalized Order-Aware Distance == Applications == Quantification is of special interest in fields such as the social sciences, epidemiology, market research, allocating resources, and ecological modelling, since these fields are inherently concerned with aggregate data. However, quantification is also useful as a building block for solving other downstream tasks, such as improving the accuracy of classifiers on out-of-distribution data, measuring classifier bias and ranker bias, and estimating the accuracy of classifiers on out-of-distribution data. == Resources == LQ 2021: the 1st International Workshop on Learning to Quantify LQ 2022: the 2nd International Workshop on Learning to Quantify LQ 2023: the 3rd International Workshop on Learning to Quantify LQ 2024: the 4th International Workshop on Learning to Quantify LQ 2025: the 5th International Workshop on Learning to Quantify LeQua 2022: the 1st Data Challenge on Learning to Quantify LeQua 2024: the 2nd Data Challenge on Learning to Quantify QuaPy: An open-source Python-based software library for quantification QuantificationLib: A Python library for quantification and prevalence estimation
Read more →
Xiaomi MiMo

Xiaomi MiMo is a family of large language models (LLMs) developed by Xiaomi. It was initially released in April 2025 with the MiMo-7B model. Currently, MiMo is available for developers through API service. It is used as the key AI model in Xiaomi's "Human x Car x Home" ecosystem. == Development == Xiaomi developed MiMo as a reasoning-focused language model. Its development team was led by Luo Fuli, who had previously worked at DeepSeek before joining Xiaomi in late 2025. The model was trained using multi-token prediction and reinforcement learning, with a particular emphasis on mathematical reasoning and code generation tasks. In March 2026, Xiaomi CEO Lei Jun announced that the company planned to invest at least US$8.7 billion in artificial intelligence over the following three years. == Models == === List of models === === MiMo-7B === MiMo-7B is the first model of this LLM. The base model, MiMo-7B-Base, was pre-trained on approximately 25 trillion tokens using web pages, academic papers, books, and synthetic reasoning data. MiMo-7B-RL underwent supervised fine-tuning and reinforcement learning on 130,000 mathematics and code problems. MiMo-7B-RL-0530 was released in May 2025. It scaled the fine-tuning dataset from 500,000 to 6 million instances and extended the RL window from 32,000 to 48,000 tokens and improved AIME 2024 scores from 68.2 to 80.1. MiMo-VL-7B was a vision-language model combining a Vision Transformer encoder with the MiMo-7B backbone. It was trained in four stages consuming 2.4 trillion tokens. Its reinforcement learning variant used Mixed On-Policy Reinforcement Learning (MORL) which integrated reward signals across perception, grounding, and reasoning. Xiaomi also released MiMo-Audio-7B, an audio-language model for voice conversion, style transfer, and speech editing. === MiMo-V2-Flash === MiMo-V2-Flash was launched in December 2025. It is a open-sourced Mixture-of-experts model with 309 billion total parameters and 15 billion active parameters. It was trained on 27 trillion tokens using FP8 mixed precision. It used hybrid attention interleaving Sliding Window and Global Attention at a 5:1 ratio. === MiMo-V2-Pro === Xiaomi publicly introduced MiMo-V2-Pro on 18 March 2026. It has over 1 trillion total parameters, 42 billion active, and a 1-million-token context window. Before the official release, the model had appeared anonymously on OpenRouter under the codename "Hunter Alpha," where it drew substantial usage and topped daily charts for several days, according to Xiaomi and Reuters. During its listing on OpenRouter, the model reportedly processed over one trillion tokens in total usage. Xiaomi later said Hunter Alpha was an early internal test build of MiMo-V2-Pro, and Reuters reported that the model had been mistaken by some users for a possible DeepSeek system before Xiaomi confirmed its origin. The model was released as a proprietary API product, and Luo Fuli stated that Xiaomi intended to open-source a variant at an unspecified future date. Xiaomi has partnered with several API web platforms like OpenClaw to launch the model. All these websites initially offered a free trial of this model for a week, but due to the overwhelming response, Xiaomi later extended the free trial period of the model until 2 April 2026. === MiMo-V2-Omni === Alongside MiMo-V2-Pro, Xiaomi launched MiMo-V2-Omni on 18 March 2026. It handles image, video, audio, and text inputs. Before the official release, it was codenamed "Healer Alpha" in OpenRouter. === MiMo-V2-TTS === On the same date as the release of MiMo-V2-Pro and MiMo-V2-Omni, a Text-to-Speech model named MiMo-V2-TTS was released also. It is a speech synthesis model. It was trained on audio data, which makes it capable of emotional transitions, mid-sentence tone shifts, singing, and synthesis of regional dialects like Sichuan, Cantonese, Henan, and Taiwanese. == Licensing == Xiaomi has used different licensing approaches for different models in the MiMo family. The MiMo-7B series and MiMo-V2-Flash were released as open-weight models. MiMo-V2-Flash was published under the MIT license with model weights and inference code available on Hugging Face. MiMo-V2-Pro and MiMo-V2-Omni were released as proprietary models. It was accessible through Xiaomi's API platform and third-party API providers. Luo Fuli stated that Xiaomi intended to open-source a variant of MiMo-V2-Pro. Although, she did not specify any timeline. MiMo-V2-TTS was released as a proprietary model with no publicly available weights.
Read more →
Time series

In mathematics, a time series is a sequence of data points indexed, listed, or graphed in chronological order. Most commonly, a time series consists of observations recorded at successive equally spaced points in time. Thus, it represents a form of discrete-time data. A time series may describe measurements collected over seconds, days, years, or even centuries. Common examples include heights of ocean tides, counts of sunspots, daily temperature readings, and the closing values of stock market indices such as the Dow Jones Industrial Average. A time series is often visualized using a run chart (a type of temporal line chart), which helps identify patterns such as trends, seasonal effects, and irregular fluctuations. Time series are widely used in statistics, actuarial science, signal processing, pattern recognition, econometrics, mathematical finance, weather forecasting, earthquake prediction, electroencephalography, control engineering, astronomy, communications engineering, and many other areas of applied science and engineering that involve temporal measurements. Time series analysis comprises methods for analyzing time series data in order to extract meaningful statistics and other characteristics of the data. Time series forecasting is the use of a model to predict future values based on previously observed values. Generally, time series data is modeled as a stochastic process. While regression analysis is often employed in such a way as to test relationships between one or more different time series, this type of analysis is not usually called "time series analysis", which refers in particular to relationships between different points in time within a single series. Time series data have a natural temporal ordering. This makes time series analysis distinct from cross-sectional studies, in which there is no natural ordering of the observations (e.g. explaining people's wages by reference to their respective education levels, where the individuals' data could be entered in any order). Time series analysis is also distinct from spatial data analysis where the observations typically relate to geographical locations (e.g. accounting for house prices by the location as well as the intrinsic characteristics of the houses). A stochastic model for a time series will generally reflect the fact that observations close together in time will be more closely related than observations further apart. In addition, time series models will often make use of the natural one-way ordering of time so that values for a given period will be expressed as deriving in some way from past values, rather than from future values (see time reversibility). Time series analysis can be applied to real-valued, continuous data, discrete numeric data, or discrete symbolic data (i.e. sequences of characters, such as letters and words in the English language). == Methods for analysis == Methods for time series analysis may be divided into two classes: frequency-domain methods and time-domain methods. The former include spectral analysis and wavelet analysis; the latter include auto-correlation and cross-correlation analysis. In the time domain, correlation and analysis can be made in a filter-like manner using scaled correlation, thereby mitigating the need to operate in the frequency domain. Additionally, time series analysis techniques may be divided into parametric and non-parametric methods. The parametric approaches assume that the underlying stationary stochastic process has a certain structure which can be described using a small number of parameters (for example, using an autoregressive or moving-average model). In these approaches, the task is to estimate the parameters of the model that describes the stochastic process. By contrast, non-parametric approaches explicitly estimate the covariance or the spectrum of the process without assuming that the process has any particular structure. Methods of time series analysis may also be divided into linear and non-linear, and univariate and multivariate. == Panel data == A time series is one type of panel data. Panel data is the general class, a multidimensional data set, whereas a time series data set is a one-dimensional panel (as is a cross-sectional dataset). A data set may exhibit characteristics of both panel data and time series data. One way to tell is to ask what makes one data record unique from the other records. If the answer is the time data field, then this is a time series data set candidate. If determining a unique record requires a time data field and an additional identifier which is unrelated to time (e.g. student ID, stock symbol, country code), then it is panel data candidate. If the differentiation lies on the non-time identifier, then the data set is a cross-sectional data set candidate. == Analysis == There are several types of motivation and data analysis available for time series which are appropriate for different purposes. === Motivation === In the context of statistics, econometrics, quantitative finance, seismology, meteorology, and geophysics the primary goal of time series analysis is forecasting. In the context of signal processing, control engineering and communication engineering it is used for signal detection. Other applications are in data mining, pattern recognition and machine learning, where time series analysis can be used for clustering, classification, query by content, anomaly detection as well as forecasting. === Exploratory analysis === A simple way to examine a regular time series is manually with a line chart. The datagraphic shows tuberculosis deaths in the United States, along with the yearly change and the percentage change from year to year. The total number of deaths declined in every year until the mid-1980s, after which there were occasional increases, often proportionately - but not absolutely - quite large. A study of corporate data analysts found two challenges to exploratory time series analysis: discovering the shape of interesting patterns, and finding an explanation for these patterns. Visual tools that represent time series data as heat map matrices can help overcome these challenges. === Estimation, filtering, and smoothing === This approach may be based on harmonic analysis and filtering of signals in the frequency domain using the Fourier transform, and spectral density estimation. Its development was significantly accelerated during World War II by mathematician Norbert Wiener, electrical engineers Rudolf E. Kálmán, Dennis Gabor and others for filtering signals from noise and predicting signal values at a certain point in time. An equivalent effect may be achieved in the time domain, as in a Kalman filter; see filtering and smoothing for more techniques. Other related techniques include: Autocorrelation analysis to examine serial dependence Spectral analysis to examine cyclic behavior which need not be related to seasonality. For example, sunspot activity varies over 11 year cycles. Other common examples include celestial phenomena, weather patterns, neural activity, commodity prices, and economic activity. Separation into components representing trend, seasonality, slow and fast variation, and cyclical irregularity: see trend estimation and decomposition of time series === Curve fitting === Curve fitting is the process of constructing a curve, or mathematical function, that has the best fit to a series of data points, possibly subject to constraints. Curve fitting can involve either interpolation, where an exact fit to the data is required, or smoothing, in which a "smooth" function is constructed that approximately fits the data. A related topic is regression analysis, which focuses more on questions of statistical inference such as how much uncertainty is present in a curve that is fit to data observed with random errors. Fitted curves can be used as an aid for data visualization, to infer values of a function where no data are available, and to summarize the relationships among two or more variables. Extrapolation refers to the use of a fitted curve beyond the range of the observed data, and is subject to a degree of uncertainty since it may reflect the method used to construct the curve as much as it reflects the observed data. For processes that are expected to generally grow in magnitude one of the curves in the graphic (and many others) can be fitted by estimating their parameters. The construction of economic time series involves the estimation of some components for some dates by interpolation between values ("benchmarks") for earlier and later dates. Interpolation is estimation of an unknown quantity between two known quantities (historical data), or drawing conclusions about missing information from the available information ("reading between the lines"). Interpolation is useful where the data surrounding the missing data is available and its trend, seasonality, and longer-term cycles are known. This is often done by using a relat
Read more →
Intelligent control

Intelligent control is a class of control techniques that use various artificial intelligence computing approaches like neural networks, Bayesian probability, fuzzy logic, machine learning, reinforcement learning, evolutionary computation and genetic algorithms. == Overview == Intelligent control can be divided into the following major sub-domains: Neural network control Machine learning control Reinforcement learning Bayesian control Fuzzy control Neuro-fuzzy control Expert Systems Genetic control New control techniques are created continuously as new models of intelligent behavior are created and computational methods developed to support them. === Neural network controller === Neural networks have been used to solve problems in almost all spheres of science and technology. Neural network control basically involves two steps: System identification Control It has been shown that a feedforward network with nonlinear, continuous and differentiable activation functions have universal approximation capability. Recurrent networks have also been used for system identification. Given, a set of input-output data pairs, system identification aims to form a mapping among these data pairs. Such a network is supposed to capture the dynamics of a system. For the control part, deep reinforcement learning has shown its ability to control complex systems. === Bayesian controllers === Bayesian probability has produced a number of algorithms that are in common use in many advanced control systems, serving as state space estimators of some variables that are used in the controller. The Kalman filter and the Particle filter are two examples of popular Bayesian control components. The Bayesian approach to controller design often requires an important effort in deriving the so-called system model and measurement model, which are the mathematical relationships linking the state variables to the sensor measurements available in the controlled system. In this respect, it is very closely linked to the system-theoretic approach to control design.
Read more →
Sequence labeling

In machine learning, sequence labeling is a type of pattern recognition task that involves the algorithmic assignment of a categorical label to each member of a sequence of observed values. A common example of a sequence labeling task is part of speech tagging, which seeks to assign a part of speech to each word in an input sentence or document. Sequence labeling can be treated as a set of independent classification tasks, one per member of the sequence. However, accuracy is generally improved by making the optimal label for a given element dependent on the choices of nearby elements, using special algorithms to choose the globally best set of labels for the entire sequence at once. As an example of why finding the globally best label sequence might produce better results than labeling one item at a time, consider the part-of-speech tagging task just described. Frequently, many words are members of multiple parts of speech, and the correct label of such a word can often be deduced from the correct label of the word to the immediate left or right. For example, the word "sets" can be either a noun or verb. In a phrase like "he sets the books down", the word "he" is unambiguously a pronoun, and "the" unambiguously a determiner, and using either of these labels, "sets" can be deduced to be a verb, since nouns very rarely follow pronouns and are less likely to precede determiners than verbs are. But in other cases, only one of the adjacent words is similarly helpful. In "he sets and then knocks over the table", only the word "he" to the left is helpful (cf. "...picks up the sets and then knocks over..."). Conversely, in "... and also sets the table" only the word "the" to the right is helpful (cf. "... and also sets of books were ..."). An algorithm that proceeds from left to right, labeling one word at a time, can only use the tags of left-adjacent words and might fail in the second example above; vice versa for an algorithm that proceeds from right to left. Most sequence labeling algorithms are probabilistic in nature, relying on statistical inference to find the best sequence. The most common statistical models in use for sequence labeling make a Markov assumption, i.e. that the choice of label for a particular word is directly dependent only on the immediately adjacent labels; hence the set of labels forms a Markov chain. This leads naturally to the hidden Markov model (HMM), one of the most common statistical models used for sequence labeling. Other common models in use are the maximum entropy Markov model and conditional random field.
Read more →
Ayoba

Ayoba is an African communication platform developed in South Africa. It is owned by Progressive Tech Holdings in Mauritius and managed by SIMFY Africa. Launched on May 4, 2019, as of April 2024, it has over 35 million active users. == History == Ayoba was first published on Google Play in February 2019. Its first marketing campaign and brand launch took place in Cameroon on May 4, 2019. In June 2019, the platform introduced its first eight channels. In November 2019, the platform reached one million active users, which increased to two million by June 2020. Subsequently, ayoba expanded its services, including the launch of games for Android in February 2020, Momo (Mobile Money) in Cameroon in May 2020, and MicroApps in May 2020. It also launched music and voice and video calling features in 12 territories in August 2020. The first version of ayoba for iOS was released in September 2020. In December of the same year, games and Messaging 2.0 were launched on the platform. In November 2020, it won Best Mobile Application at the African Digital Awards. In 2021, it won OTT Brand of the Year at the Marketing World Awards in Ghana. In December 2022, it received Top Innovative Technology and Telecom Product of the Year at the National Communications Awards in December 2022. In June 2023 ayoba partnered with BoomPlay and as of April 2024, it had 35 million monthly active users. Ayoba has partnered with Jumia Ghana to offer exclusive deals to users. Ayoba users can get a 10% discount on selected Jumia purchases through the app, with no data charges for MTN users. This partnership aims to make online shopping more affordable and accessible by integrating Jumia's offers into the ayoba app. Ayoba supports over 35 million users across Africa and provides services in 22 languages. To access the deals, users can download the ayoba app from the Google Play Store, iOS Store, or the official website. == Platform features == Chat, Call and Share: ayoba enables instant messaging, voice notes, picture sharing, and file sharing with contacts, even if they do not have the app installed. The app supports voice and video calls on both Android and iOS, as well as group chats, help channel and SMS continuity (non ayoba users receive messages as SMS, their responses appear in the ayoba app). Music: ayoba offers a free music player with daily updates on international and African music. Users can find playlists for different genres. Games: ayoba provides a selection of interactive games, including action, adventure, and children's games available on both Android and iOS. Mobile Money Transfers: In certain territories, ayoba supports mobile money transfers using MTN Mobile Money (MoMo) for transactions within the app. MicroApps: ayoba features individual MicroApps within the platform that offer content and services, including streaming channels, podcasts, and specialized apps. The availability of these apps may vary by country. == Operations == ayoba primarily focuses on the following territories: Nigeria, Cameroon, South Africa, Ghana, Côte d'Ivoire, Uganda, Republic of Congo, Benin, Zambia, Tanzania, Kenya, Senegal, Togo, Guinea Bissau, Guinea Conakry, Sudan, South Sudan, and Liberia. The company operates from its offices in Cape Town and Johannesburg, South Africa. David Gillaranz served as the CEO from 2019 to 2021, and Burak Akinci has been the CEO since 2021.
Read more →
Belief–desire–intention model

For popular psychology, the belief–desire–intention (BDI) model of human practical reasoning was developed by Michael Bratman as a way of explaining future-directed intention. BDI is fundamentally reliant on folk psychology (the 'theory theory'), which is the notion that our mental models of the world are theories. It was used as a basis for developing the belief–desire–intention software model. == Applications == BDI was part of the inspiration behind the BDI software architecture, which Bratman was also involved in developing. Here, the notion of intention was seen as a way of limiting time spent on deliberating about what to do, by eliminating choices inconsistent with current intentions. BDI has also aroused some interest in psychology. BDI formed the basis for a computational model of childlike reasoning CRIBB.
Read more →
Deep Learning Anti-Aliasing

Deep Learning Anti-Aliasing (DLAA) is a form of spatial anti-aliasing developed by Nvidia. DLAA depends on and requires Tensor Cores available in Nvidia RTX cards. DLAA is similar to Deep Learning Super Sampling (DLSS) in its anti-aliasing method, with one important differentiation being that the goal of DLSS is to increase performance at the cost of image quality, whereas the main priority of DLAA is improving image quality at the cost of performance (irrelevant of resolution upscaling or downscaling). DLAA is similar to temporal anti-aliasing (TAA) in that they are both spatial anti-aliasing solutions relying on past frame data. Compared to TAA, DLAA is substantially better when it comes to shimmering, flickering, and handling small meshes like wires. == Technical overview == DLAA collects game rendering data including raw low-resolution input, motion vectors, depth buffers, and exposure information. This information feeds into a convolutional neural network that processes the image to reduce aliasing while preserving fine detail. The neural network architecture employs an auto-encoder design trained on high-quality reference images. The training dataset includes diverse scenarios focusing on challenging cases like sub-pixel details, high-contrast edges, and transparent surfaces. The network then processes frames in real-time. Unlike traditional anti-aliasing solutions that rely on manually written heuristics, such as TAA, DLAA uses its neural network to preserve fine details while eliminating unwanted visual artifacts. == History == DLAA was initially called and marketed by Nvidia as DLSS 2x. The first game that added support for DLAA was The Elder Scrolls Online, which implemented the feature in 2021. By June 2022, DLAA was only available in six games. This number rose to 17 by February 2023. In June 2023, TechPowerUp reported that "DLAA is seeing sluggish adoption among game developers", and that Nvidia was working on adding DLAA to the quality presets of DLSS to boost adoption. By December 2023, DLAA was supported in 41 games. In early 2025, an update for the Nvidia App added a driver-based DLSS override feature that enables users to activate DLAA even in games that do not support it natively. == Differences between TAA and DLAA == TAA is used in many modern video games and game engines; however, all previous implementations have used some form of manually written heuristics to prevent temporal artifacts such as ghosting and flickering. One example of this is neighborhood clamping which forcefully prevents samples collected in previous frames from deviating too much compared to nearby pixels in newer frames. This helps to identify and fix many temporal artifacts, but deliberately removing fine details in this way is analogous to applying a blur filter, and thus the final image can appear blurry when using this method. DLAA uses an auto-encoder convolutional neural network trained to identify and fix temporal artifacts, instead of manually programmed heuristics as mentioned above. Because of this, DLAA can generally resolve detail better than other TAA and TAAU implementations, while also removing most temporal artifacts. == Differences between DLSS and DLAA == While DLSS handles upscaling with a focus on performance, DLAA handles anti-aliasing with a focus on visual quality. DLAA runs at the given screen resolution with no upscaling or downscaling functionality provided by DLAA. DLSS and DLAA share the same AI-driven anti-aliasing method. As such, DLAA functions like DLSS without the upscaling part. Both are made by Nvidia and require Tensor Cores. However, DLSS and DLAA cannot be enabled at the same time, only one can be selected depending on whether performance or image quality is prioritized. == Reception == TechPowerUp found that "[c]ompared to TAA and DLSS, DLAA is clearly producing the best image quality, especially at lower resolutions", arguing that, while "DLSS was already doing a better job than TAA at reconstructing small objects", "DLAA does an even better job". In a Cyberpunk 2077 performance test, IGN stated that "DLAA provided somewhat similar results [FPS wise] to the normal raster mode in most cases but got significant performance boost with the help of frame generation", a feature not available when using native resolution. Rock Paper Shotgun noted that, while DLAA is "not a completely perfect form of anti-aliasing, as the occasional jaggies are present", it "looks a lot sharper overall [than TAA], and especially in motion." According to PC World, "DLAA offers very good anti-aliasing without losing visual information — alternatives like TAA tend to struggle during motion-filled scenes, where DLAA doesn’t. Furthermore, DLAA’s loss of performance is lower than with conventional anti-aliasing methods."
Read more →