AI Generator Youtube Channel Name

AI Generator Youtube Channel Name — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Gonioreflectometer

  A gonioreflectometer is a device for measuring a bidirectional reflectance distribution function (BRDF). The device consists of a light source illuminating the material to be measured and a sensor that captures light reflected from that material. The light source should be able to illuminate and the sensor should be able to capture data from a hemisphere around the target. The hemispherical rotation dimensions of the sensor and light source are the four dimensions of the BRDF. The 'gonio' part of the word refers to the device's ability to measure at different angles. Several similar devices have been built and used to capture data for similar functions. Most of these devices use a camera instead of the light intensity-measuring sensor to capture a two-dimensional sample of the target. Examples include: a spatial gonioreflectometer for capturing the SBRDF (McAllister, 2002). a camera gantry for capturing the light field (Levoy and Hanrahan, 1996). an unnamed device for capturing the bidirectional texture function (Dana et al., 1999).

  Read more →
• 

  Story (social media)

  In social media, a story is a function in which the user tells a narrative or provides status messages and information in the form of short, time-limited clips in an automatically running sequence. == Definition == A story is a short sequence of images, videos, or other social media content, which can be accompanied by backgrounds, music, text, stickers, animations, filters or emojis. Social media platforms typically advance through the sequence automatically when presenting a story to a viewer. Although the sequential nature of stories can be used to tell a narrative, the pieces of a story can also be unrelated. Social media platforms that offer stories will typically have a primary story for each user which consists of everything the user posted to their story over a certain period of time, usually the most recent 24 hours. Most stories cannot be changed afterwards and are only available for a short time. Stories are almost exclusively created on a mobile device such as a smartphone or tablet computer and are usually displayed vertically. == History == In October 2013, Snapchat first introduced the story function as a series of Snaps that can together tell a narrative through a chronological order, with each Snap being viewable by all of the poster's friends and deleted after 24 hours. Stories soon surpassed private Snaps to become Snapchat's most-viewed type of post. After 2015, Snapchat introduced a feature allowing users to post private stories viewable by a chosen subset of their friends. Later other apps would copy this feature. In August 2016, Instagram introduced a stories function that deletes the content after 24 hours. Various commenters have accused the site of copying Snapchat. In February 2017, the instant messenger WhatsApp introduced the Now Status stories function in beta, which was later renamed Status. In March 2017, a story function was introduced in Facebook Messenger. In February 2018, Google launched AMP Stories, bringing a story-style format to certain Google search results on mobile devices. In August 2018, YouTube introduced a stories function that initially was limited to pictures, but was later expanded to support short video clips. The feature was shut down in June 2023. In August 2018, the GIF website Giphy introduced a story function. In March 2022, TikTok added a story feature which allowed users to create 15 second long videos that delete after 24 hours. In June 2023, Telegram CEO Pavel Durov announced stories for Telegram would be released in July 2023. In July 2023, the feature was released for premium users, and in August 2023 it was rolled out for all users. == User motivations == In 2022, a study performed by Jia-Dai (Evelyn) Lu and Jhih-Syuan (Elaine) Lin examined the various motivations for updating stories on Instagram. The researchers found a new configuration of motivations for using Instagram Stories: exploration, self-enhancement, perceived functionality, entertainment, social sharing, relationship building, novelty, and surveillance. The findings also highlighted that contribution and creation activities are likely to result in positive emotions, while creation alone predicts negative emotions while updating stories on Instagram. == Usage statistics == In 2019, around 1.5 billion people worldwide every day on average used the stories function in a social network or messenger. Younger people in particular use this function. More than 20% of people aged 18 to 24 use Instagram stories, while it is just under 2% of those over 55. In a Facebook survey of 18,000 participants from 12 countries, 68% said they used the stories function at least once a month. Stories in the areas of fashion and tourism are particularly popular. The website Fanpage Karma analyzed several Instagram accounts and determined the average reach of posts and stories per follower, concluding that posts have a higher reach than stories, which often have less than half the reach.

  Read more →
• 

  Death of Molly Russell

  In November 2017, Molly Russell, a fourteen-year-old British schoolgirl from Harrow, London, was found dead in her bedroom by her parents. In an inquest, the coroner stated that she had died from an act of self-harm following depression and the results of social media consumption, including material on Instagram and Pinterest. She also had a Twitter account in which she documented her growing depression. == Life == Russell had been a pupil at Hatch End High School. At the inquest, the school's head teacher expressed shock that she was able to access distressing online content. Her parents stated that she had never shown any previous signs of struggle and was doing very well in school. It was revealed at the inquest that in the six months prior to her death, 2,100 of 16,300 pieces of content she had interacted with on Instagram were on topics such as self-harm, depression, and suicide. It was also noted that throughout her experience on social media, there were never any warning signs about the information she viewed on these platforms. == Subsequent events == Dr. Navin Venugopal, the child psychiatrist assigned to the case investigating her death, called the material she viewed "disturbing and distressing" and said he was unable to sleep well for weeks after viewing it. The coroner Andrew Walker concluded that Molly's death was "an act of self harm suffering from depression and the negative effects of online content". He issued a prevention of future deaths report regarding her death, in which he made a number of recommendations for operators of online platforms, including: separating platforms for adults and children age verification changes in policy on filtering of age-specific content adding features for parental supervision and control data retention of material viewed by children He suggested that this could be accomplished by either legislation or self-regulation. The lawyer representing her family at the inquest stated that the findings "captured all of the elements of why this material is so harmful." The case has been cited as a motivator for the passage of the Online Safety Act. A charity, the Molly Rose Foundation, was set up in her memory, with the goal of suicide prevention for young people. Meta and Pinterest are believed to have made substantial donations to the charity.

  Read more →
• 

  Cryptographic Module Testing Laboratory

  Cryptographic Module Testing Laboratory (CMTL) is an information technology (IT) computer security testing laboratory that is accredited to conduct cryptographic module evaluations for conformance to the FIPS 140-2 U.S. Government standard. The National Institute of Standards and Technology (NIST) National Voluntary Laboratory Accreditation Program (NVLAP) accredits CMTLs to meet Cryptographic Module Validation Program (CMVP) standards and procedures. This has been replaced by FIPS 140-2 and the Cryptographic Module Validation Program (CMVP). == CMTL requirements == These laboratories must meet the following requirements: NIST Handbook 150, NVLAP Procedures and General Requirements NIST Handbook 150-17 Information Technology Security Testing - Cryptographic Module Testing NVLAP Specific Operations Checklist for Cryptographic Module Testing == FIPS 140-2 in relation to the Common Criteria == A CMTL can also be a Common Criteria (CC) Testing Laboratory (CCTL). The CC and FIPS 140-2 are different in the abstractness and focus of evaluation. FIPS 140-2 testing is against a defined cryptographic module and provides a suite of conformance tests to four FIPS 140 security levels. FIPS 140-2 describes the requirements for cryptographic modules and includes such areas as physical security, key management, self tests, roles and services, etc. The standard was initially developed in 1994 - prior to the development of the CC. The CC is an evaluation against a Protection Profile (PP), or security target (ST). Typically, a PP covers a broad range of products. A CC evaluation does not supersede or replace a validation to either FIPS 140-1, FIPS140-2 or FIPS 140-3. The four security levels in FIPS 140-1 and FIPS 140-2 do not map directly to specific CC EALs or to CC functional requirements. A CC certificate cannot be a substitute for a FIPS 140-1 or FIPS 140-2 certificate. If the operational environment is a modifiable operational environment, the operating system requirements of the Common Criteria are applicable at FIPS Security Levels 2 and above. FIPS 140-1 required evaluated operating systems that referenced the Trusted Computer System Evaluation Criteria (TCSEC) classes C2, B1 and B2. However, TCSEC is no longer in use and has been replaced by the Common Criteria. Consequently, FIPS 140-2 now references the Common Criteria. FIPS 140-2 or FIPS 140-3 validation efforts can be in some parts reused in Common Criteria evaluations, specifically in areas related to entropy source and cryptographic algorithms.

  Read more →
• 

  Augment (app)

  Augment is an augmented reality SaaS platform that allows users to visualize their products in 3D in real environment and in real-time through tablets or smartphones. The software can be used for retail, e-commerce, architecture, and other purposes. Augment created a mobile app of the same name, used to visualize 3D models in augmented reality and a web application called Augment Manager for 3D content management. The company is based in Paris, France, and was founded in October 2011 by Jean-François Chianetta, Cyril Champier, and Mickaël Jordan. In March 2016, Augment announced €3 million in its series-A round from Salesforce Ventures, which bringing the total funding since launch to $4.7 million. Augment lets businesses and 3D professionals visualize projects in their actual size and environment, on iPhone, iPad, and Android, using the power of augmented reality. Users can print the Augment tracker or create their own tracker to place the 3D models in space and at scale in real time. Common uses of the technology include product presentations, interactive print campaigns and e-Commerce product visualization. Augment has just released its augmented reality SDK solutions for retail and augmented commerce. The SDK solutions, available for both native mobile app and web integrations, allow companies to embed augmented reality product visualization in their existing eCommerce platforms. == Technology == Augment uses the following 3D technologies: Vuforia Augmented Reality SDK OpenGL == Customer cases == Companies such as Coca-Cola, Siemens, Nokia, Nestle, and Boeing are using Augment's solutions. == History == Augment was first created by Jean-François Chianetta in October 2011. Chianetta later teamed up with Cyril Champier and Mickaël Jordan for further development. The co-founding team was among the 12 startups of Season 3 of French accelerator Le Camping. The team raised one million euros (US$1,300,000) in April 2013 and moved its office to Paris. In March 2016, Augment raised US$3M Series A funding from Salesforce and other investors. In 2013, Augment's first service, Boost Business Catalog, was made available to help businesses catalogue and display their product models. Customers can rotate the images in 3D and view augmented content before deciding what to buy. == Awards == "Best Innovation" at Ecommerce Mag Trophy 2013

  Read more →
• 

  IBM remote batch terminals

  The IBM 2780 and the IBM 3780 are devices developed by IBM for performing remote job entry (RJE) and other batch functions over telephone lines; they communicate with the mainframe via Binary Synchronous Communications (BSC or Bisync) and replaced older terminals using synchronous transmit-receive (STR). In addition, IBM has developed workstation programs for the 1130, 360/20, 2922, System/360 other than 360/20, System/370 and System/3. == 2780 Data Transmission Terminal == The 2780 Data Transmission Terminal first shipped in 1967. It consists of: A line printer similar to the IBM 1443 that can print up to 240 lines per minute (lpm), or 300 lpm using an extremely restricted character set. A card reader/punch unit, similar to an IBM 1442, that can read up to 400 cards per minute (cpm) and can punch up to 355 cpm. A line buffer that stores data received or to be transmitted over the communications line. A binary synchronous adapter which controls the flow of data over the communications line. The 2780 is capable of local (offline) card to print operation. It comes in four models: Model 1: Can read punched cards and transmit the data to a remote host computer, and can receive and print data sent by the host. Model 2: Same as Model 1 but adds the ability to punch card data received from the host. Model 3: Can only print data received from the host, but not send data to it. Model 4: Can read and punch card data, but has no printing capabilities. The 2780 uses a dedicated communication line at speeds of 1200, 2000, 2400 or 4800 bits per second. It is a half duplex device, although full duplex lines can be used with some increase in throughput. It can communicate in Transcode (a 6-bit code), 8-bit EBCDIC, or 7-bit ASCII. == 2770 Data Communication System == The 2770, announced in 1969, "was said to surpass all other IBM terminals in the variety of available input-output devices." The 2770 was developed by the IBM General Products Division (GPD) in Rochester, MN. It comes standard with a desktop terminal with keyboard. The printer and other devices (any two in any combination) can be attached to the 2772 Multi-Purpose Control unit. Possible devices include: 50 Magnetic Data Inscriber 545 Card Punch Model 3 (non-printing) or Model 4 (printing) 1017 Paper Tape Reader 1018 Paper Tape Punch 1053 Printer Model 1 1255 Magnetic Character Reader Models 1, 2 or 3 2203 Printer Model A1 or A2 2213 Printer Model 1 or 2 2265 Display Station Model 2 2502 Card Reader Model A1 or A2 5496 Data Recorder == 3780 Data Communications Terminal == In May 1972, IBM announced the IBM 3780, an enhanced version of the 2780. The 3780 was developed by IBM's Data Processing Division (DPD). There is one model, with an optional card punch. The 3780 drops Transcode support and incorporates several performance enhancements. It supports compression of blank fields in data using run-length encoding. It provides the ability to interleave data between devices, introduces double buffering, and adds support for the Wait-before-transmit ACKnowledgement (WACK) and Temporary Text Delay (TTD) Binary Synchronous control characters. The integrated punched card unit can read cards at 600 cards per minute. The integrated printer is rated at 300, 350 or 425 lines per minute based on characters set (63, 52 or 39 characters). The 3781 Card Punch is an optional feature. It punches 160 columns per second, or 91 cards per minute if all 80 columns are punched. The IBM 2780 and 3780 were later emulated on various types of equipment, including eventually the personal computer. A notable early emulation was the DN60, by Digital Equipment Corporation in the late 1970s. == 3770 Data Communications System == In 1974 IBM Data Processing Division (DPD) offered a successor to the 3780, called the 3770 Data Communications System, supporting SDLC, BSC, BSC Multi-leaving and SNA, depending on the configuration. The 3770 is a family of desk console style terminals that offers a variety of keyboard and printer combinations as well as I/O equipment attachment and communications features. The terminals come built into a desk and include the following models: 3771 Communication Terminal (optional card reader, optional card punch, wire matrix printer) Models 1 (40 cps printer), 2 (80 cps printer), and 3 (120 cps printer). 3773 Communication Terminal (diskette, wire matrix printer) Models 1 (40 cps printer), 2 (80 cps printer), and 3 (120 cps printer). Each model has a P version which adds some programming features. 3774 Communication Terminal (optional card reader, optional card punch, optional belt printer, wire matrix printer) Models 1 (80 cps printer), and 2 (120 cps printer). Each model has a P version which adds some programming features, a 480-character display and a non-removable diskette. 3775 Communication Terminal (optional card reader, optional card punch, optional diskette, belt printer) Model 1 (120 lpm printer). The model P1 adds some programming features, a 480-character display and a non-removable diskette. 3776 Communication Terminal (optional card reader, optional card punch, optional diskette, belt printer) Models 1 (300 lpm printer) and 2 (400 lpm printer). Models 3 and 4 are similar to models 1 and 2. 3777 Communication Terminal (optional card reader, optional diskette, train printer) Model 1 (up to 1000 lpm printer depending on character set). Model 2 adds an optional card punch, model 3 adds an optional magnetic tape drive and model 4 replaces the train printer with a slower model called the IBM 3262. The model 4 also allows a second, optional, 3262. The following I/O devices can be attached to a 3770 terminal: IBM 2502 Card Reader: Models A1 (up to 150 card per minute), A2 (up to 300 cards per minute) or A3 (up to 400 cards per minute) IBM 3203 Printer Model 3: 1000 LPM using 48 character set IBM 3501 Card Reader: Up to 50 cards per minute desktop unit IBM 3521 Card Punch: Up to 50 cards per minute IBM 3782 Card Attachment unit, which allows the 2502 or 3521 to be attached to any terminal except the 3777 IBM 3784 Line Printer, can be attached to a 3774 as a second printer. Up to 155 LPM with 48 characters set print belt. == Workstation programs == IBM distributes workstation programs with systems software including OS/360 Attached Support Processor (ASP) Houston Automatic Spooling Priority (HASP and HASP II) Operating System/Virtual Storage 1 (OS/VS1) Operating System/Virtual Storage 2 (OS/VS2 MVS) Release 2 through 3.8 MVS versions from MVS/SP Version 1 through z/OS Priority Output Writers, Execution processors and input Readers (POWER) Remote Spooling Communications Subsystem (RSCS) Except for the RJE workstation programs in OS/360, these programs use a variation of BSC known as Multi-leaving. In addition, IBM provides separately ordered workstation programs using BSC. Systems Network Architecture (SNA) and TCP/IP. Workstation programs are available from IBM and third-party vendors to support all of these protocols: 2770/3770 2780/3780 Multileaving Network Job Entry (NJE) OS/360 RJE SNA TCP/IP

  Read more →
• 

  Embedded analytics

  Embedded analytics enables organisations to integrate analytics capabilities into their own, often software as a service, applications, portals, or websites. This differs from embedded software and web analytics (also commonly known as product analytics). This integration typically provides contextual insights, quickly, easily and conveniently accessible since these insights should be present on the web page right next to the other, operational, parts of the host application. Insights are provided through interactive data visualisations, such as charts, diagrams, filters, gauges, maps and tables often in combination as dashboards embedded within the system. This setup enables easier, in-depth data analysis without the need to switch and log in between multiple applications. Embedded analytics is also known as customer facing analytics. Embedded analytics is the integration of analytic capabilities into a host, typically browser-based, business-to-business, software as a service, application. These analytic capabilities would typically be relevant and contextual to the use-case of the host application. == History == The term "embedded analytics" was first used by Howard Dresner: consultant, author, former Gartner analyst and inventor of the term "business intelligence" said Howard Dresner while he was working for Hyperion Solutions, a company that Oracle bought in 2007. Oracle started then to use the term "embedded analytics" at their press release for Oracle Rapid Planning on 2009 . == Considerations with embedded analytics == When evaluating embedding analytics, consideration would normally be given to integration at various levels, these would likely include: security integration, data integration, application logic integration, business rules integration, and user experience integration. This is in contrast to traditional BI, which expects users to leave their workflow applications to look at data insights in a separate set of tools. This immediacy makes embedded analytics much more intuitive and likely to be valued by users. A December 2016 report from Nucleus Research found that using BI tools, which require toggling between applications, can take up as much as 1–2 hours of an employee's time each week, whereas embedded analytics eliminate the need to toggle between apps.

  Read more →
• 

  Cryptosystem

  In cryptography, a cryptosystem is a suite of cryptographic algorithms needed to implement a particular security service, such as confidentiality (encryption). Typically, a cryptosystem consists of three algorithms: one for key generation, one for encryption, and one for decryption. The term cipher (sometimes cypher) is often used to refer to a pair of algorithms, one for encryption and one for decryption. Therefore, the term cryptosystem is most often used when the key generation algorithm is important. For this reason, the term cryptosystem is commonly used to refer to public key techniques; however both "cipher" and "cryptosystem" are used for symmetric key techniques. == Formal definition == Mathematically, a cryptosystem or encryption scheme can be defined as a tuple ( P , C , K , E , D ) {\displaystyle ({\mathcal {P}},{\mathcal {C}},{\mathcal {K}},{\mathcal {E}},{\mathcal {D}})} with the following properties. P {\displaystyle {\mathcal {P}}} is a set called the "plaintext space". Its elements are called plaintexts. C {\displaystyle {\mathcal {C}}} is a set called the "ciphertext space". Its elements are called ciphertexts. K {\displaystyle {\mathcal {K}}} is a set called the "key space". Its elements are called keys. E = { E k : k ∈ K } {\displaystyle {\mathcal {E}}=\{E_{k}:k\in {\mathcal {K}}\}} is a set of functions E k : P → C {\displaystyle E_{k}:{\mathcal {P}}\rightarrow {\mathcal {C}}} . Its elements are called "encryption functions". D = { D k : k ∈ K } {\displaystyle {\mathcal {D}}=\{D_{k}:k\in {\mathcal {K}}\}} is a set of functions D k : C → P {\displaystyle D_{k}:{\mathcal {C}}\rightarrow {\mathcal {P}}} . Its elements are called "decryption functions". For each e ∈ K {\displaystyle e\in {\mathcal {K}}} , there is d ∈ K {\displaystyle d\in {\mathcal {K}}} such that D d ( E e ( p ) ) = p {\displaystyle D_{d}(E_{e}(p))=p} for all p ∈ P {\displaystyle p\in {\mathcal {P}}} . Note; typically this definition is modified in order to distinguish an encryption scheme as being either a symmetric-key or public-key type of cryptosystem. == Examples == A classical example of a cryptosystem is the Caesar cipher. A more contemporary example is the RSA cryptosystem. Another example of a cryptosystem is the Advanced Encryption Standard (AES). AES is a widely used symmetric encryption algorithm that has become the standard for securing data in various applications. Paillier cryptosystem is another example used to preserve and maintain privacy and sensitive information. It is featured in electronic voting, electronic lotteries and electronic auctions.

  Read more →
• 

  Situated

  In artificial intelligence and cognitive science, the term situated refers to an agent which is embedded in an environment. The term situated is commonly used to refer to robots, but some researchers argue that software agents can also be situated if: they exist in a dynamic (rapidly changing) environment, which they can manipulate or change through their actions, and which they can sense or perceive. Examples might include web-based agents, which can alter data or trigger processes (such as purchases) over the internet, or virtual-reality bots which inhabit and change virtual worlds, such as Second Life. Being situated is generally considered to be part of being embodied, but it is useful to consider each perspective individually. The situated perspective emphasizes that intelligent behaviour derives from the environment and the agent's interactions with it. The nature of these interactions are defined by an agent's embodiment.

  Read more →
• 

  Initialization vector

  In cryptography, an initialization vector (IV) or starting variable is an input to a cryptographic primitive being used to provide the initial state. The IV is typically required to be random or pseudorandom, but sometimes an IV only needs to be unpredictable or unique. Randomization is crucial for some encryption schemes to achieve semantic security, a property whereby repeated usage of the scheme under the same key does not allow an attacker to infer relationships between (potentially similar) segments of the encrypted message. For block ciphers, the use of an IV is described by the modes of operation. Some cryptographic primitives require the IV only to be non-repeating, and the required randomness is derived internally. In this case, the IV is commonly called a nonce (a number used only once), and the primitives (e.g. CBC) are considered stateful rather than randomized. This is because an IV need not be explicitly forwarded to a recipient but may be derived from a common state updated at both sender and receiver side. (In practice, a short nonce is still transmitted along with the message to consider message loss.) An example of stateful encryption schemes is the counter mode of operation, which has a sequence number for a nonce. The IV size depends on the cryptographic primitive used; for block ciphers it is generally the cipher's block-size. In encryption schemes, the unpredictable part of the IV has at best the same size as the key to compensate for time/memory/data tradeoff attacks. When the IV is chosen at random, the probability of collisions due to the birthday problem must be taken into account. Traditional stream ciphers such as RC4 do not support an explicit IV as input, and a custom solution for incorporating an IV into the cipher's key or internal state is needed. Some designs realized in practice are known to be insecure; the WEP protocol is a notable example, and is prone to related-IV attacks. == Motivation == A block cipher is one of the most basic primitives in cryptography, and frequently used for data encryption. However, by itself, it can only be used to encode a data block of a predefined size, called the block size. For example, a single invocation of the AES algorithm transforms a 128-bit plaintext block into a ciphertext block of 128 bits in size. The key, which is given as one input to the cipher, defines the mapping between plaintext and ciphertext. If data of arbitrary length is to be encrypted, a simple strategy is to split the data into blocks each matching the cipher's block size, and encrypt each block separately using the same key. This method is not secure as equal plaintext blocks get transformed into equal ciphertexts, and a third party observing the encrypted data may easily determine its content even when not knowing the encryption key. To hide patterns in encrypted data while avoiding the re-issuing of a new key after each block cipher invocation, a method is needed to randomize the input data. In 1980, the NIST published a national standard document designated Federal Information Processing Standard (FIPS) PUB 81, which specified four so-called block cipher modes of operation, each describing a different solution for encrypting a set of input blocks. The first mode implements the simple strategy described above, and was specified as the electronic codebook (ECB) mode. In contrast, each of the other modes describe a process where ciphertext from one block encryption step gets intermixed with the data from the next encryption step. To initiate this process, an additional input value is required to be mixed with the first block, and which is referred to as an initialization vector. For example, the cipher-block chaining (CBC) mode requires an unpredictable value, of size equal to the cipher's block size, as additional input. This unpredictable value is added to the first plaintext block before subsequent encryption. In turn, the ciphertext produced in the first encryption step is added to the second plaintext block, and so on. The ultimate goal for encryption schemes is to provide semantic security: by this property, it is practically impossible for an attacker to draw any knowledge from observed ciphertext. It can be shown that each of the three additional modes specified by the NIST are semantically secure under so-called chosen-plaintext attacks. == Properties == Properties of an IV depend on the cryptographic scheme used. A basic requirement is uniqueness, which means that no IV may be reused under the same key. For block ciphers, repeated IV values devolve the encryption scheme into electronic codebook mode: equal IV and equal plaintext result in equal ciphertext. In stream cipher encryption uniqueness is crucially important as plaintext may be trivially recovered otherwise. Example: Stream ciphers encrypt plaintext P to ciphertext C by deriving a key stream K from a given key and IV and computing C as C = P xor K. Assume that an attacker has observed two messages C1 and C2 both encrypted with the same key and IV. Then knowledge of either P1 or P2 reveals the other plaintext since C1 xor C2 = (P1 xor K) xor (P2 xor K) = P1 xor P2. Many schemes require the IV to be unpredictable by an adversary. This is effected by selecting the IV at random or pseudo-randomly. In such schemes, the chance of a duplicate IV is negligible, but the effect of the birthday problem must be considered. As for the uniqueness requirement, a predictable IV may allow recovery of (partial) plaintext. Example: Consider a scenario where a legitimate party called Alice encrypts messages using the cipher-block chaining mode. Consider further that there is an adversary called Eve that can observe these encryptions and is able to forward plaintext messages to Alice for encryption (in other words, Eve is capable of a chosen-plaintext attack). Now assume that Alice has sent a message consisting of an initialization vector IV1 and starting with a ciphertext block CAlice. Let further PAlice denote the first plaintext block of Alice's message, let E denote encryption, and let PEve be Eve's guess for the first plaintext block. Now, if Eve can determine the initialization vector IV2 of the next message she will be able to test her guess by forwarding a plaintext message to Alice starting with (IV2 xor IV1 xor PEve); if her guess was correct this plaintext block will get encrypted to CAlice by Alice. This is because of the following simple observation: CAlice = E(IV1 xor PAlice) = E(IV2 xor (IV2 xor IV1 xor PAlice)). Depending on whether the IV for a cryptographic scheme must be random or only unique the scheme is either called randomized or stateful. While randomized schemes always require the IV chosen by a sender to be forwarded to receivers, stateful schemes allow sender and receiver to share a common IV state, which is updated in a predefined way at both sides. == Block ciphers == Block cipher processing of data is usually described as a mode of operation. Modes are primarily defined for encryption as well as authentication, though newer designs exist that combine both security solutions in so-called authenticated encryption modes. While encryption and authenticated encryption modes usually take an IV matching the cipher's block size, authentication modes are commonly realized as deterministic algorithms, and the IV is set to zero or some other fixed value. == Stream ciphers == In stream ciphers, IVs are loaded into the keyed internal secret state of the cipher, after which a number of cipher rounds are executed prior to releasing the first bit of output. For performance reasons, designers of stream ciphers try to keep that number of rounds as small as possible, but because determining the minimal secure number of rounds for stream ciphers is not a trivial task, and considering other issues such as entropy loss, unique to each cipher construction, related-IVs and other IV-related attacks are a known security issue for stream ciphers, which makes IV loading in stream ciphers a serious concern and a subject of ongoing research. == WEP IV == The 802.11 encryption algorithm called WEP (short for Wired Equivalent Privacy) used a short, 24-bit IV, leading to reused IVs with the same key, which led to it being easily cracked. Packet injection allowed for WEP to be cracked in times as short as several seconds. This ultimately led to the deprecation of WEP. == SSL 2.0 IV == In cipher-block chaining mode (CBC mode), the IV need not be secret, but must be unpredictable (In particular, for any given plaintext, it must not be possible to predict the IV that will be associated to the plaintext in advance of the generation of the IV.) at encryption time. Additionally for the output feedback mode (OFB mode), the IV must be unique. In particular, the (previously) common practice of re-using the last ciphertext block of a message as the IV for the next message is insecure (for example, this method was used by SSL 2.0). If an attacker knows

  Read more →
• 

  Kruskal count

  The Kruskal count (also known as Kruskal's principle, Dynkin–Kruskal count, Dynkin's counting trick, Dynkin's card trick, coupling card trick or shift coupling) is a probabilistic concept originally demonstrated by the Russian mathematician Evgenii Borisovich Dynkin in the 1950s or 1960s discussing coupling effects and rediscovered as a card trick by the American mathematician Martin David Kruskal in the early 1970s as a side-product while working on another problem. It was published by Kruskal's friend Martin Gardner and magician Karl Fulves in 1975. This is related to a similar trick published by magician Alexander F. Kraus in 1957 as Sum total and later called Kraus principle. Besides uses as a card trick, the underlying phenomenon has applications in cryptography, code breaking, software tamper protection, code self-synchronization, control-flow resynchronization, design of variable-length codes and variable-length instruction sets, web navigation, object alignment, and others. == Card trick == The trick is performed with cards, but is more a magical-looking effect than a conventional magic trick. The magician has no access to the cards, which are manipulated by members of the audience. Thus sleight of hand is not possible. Rather the effect is based on the mathematical fact that the output of a Markov chain, under certain conditions, is typically independent of the input. A simplified version using the hands of a clock performed by David Copperfield is as follows. A volunteer picks a number from one to twelve and does not reveal it to the magician. The volunteer is instructed to start from 12 on the clock and move clockwise by a number of spaces equal to the number of letters that the chosen number has when spelled out. This is then repeated, moving by the number of letters in the new number. The output after three or more moves does not depend on the initially chosen number and therefore the magician can predict it.

  Read more →
• 

  Social film

  A social film is a type of interactive film that is presented through the lens of social media. A social film is distributed digitally and integrates with a social networking service, such as Facebook or YouTube. It combines features of web video, social network games and social media. == Key elements == Social films are a more recent phenomenon, and, in turn, there are few precedents for their format. Although there are not many examples of this genre of film, the medium has certain identifiable elements: Casual entertainment Social media User-generated content Game mechanics Using just one of these factors or a combination of them, a social film engages viewers to interact directly with the work. This can be done through usual social media functionality like comments and ranking or adding directly to the narrative itself. Just as with memes, social film distribution relies on the viral spread enabled by social media. This is based on the viral expansion loops model, in which a viewer benefits from sharing the application with friends, exponentially creating new viewers compelled to share the application. == History == One of the first social films to be created was from the YouTube channel lonelygirl15. This social film started in 2006 and was created by Miles Beckett , Mesh Flinders, and Greg Goodfried. They used YouTube posts to create an interactive video series about a fictional character who showcased her life in a vlog format. As the videos went on, more bizarre things would keep happening to the main character, Bree, before she just stopped uploading. This channel was not only the first viral social film, but went on to be one of the first viral YouTube channels to be created. It did take a few years to see any more films in this genre, but 2011 saw many people start to try their hand at making these films. The first social film in this year was a film called Him, Her and Them which was produced and released by Murmur in April 2011. It was distributed exclusively through Facebook and promoted as the first “Facebook film.” The film is composed of short video clips and interactive slideshows, integrating Facebook's Social Graph API. Users participate via text-based additions to the story, which are viewable only by friends within their social network. In May 2011, Canon and Ron Howard teamed up to create Project Imagin8ion, which was a photo contest where photographers submitted photos and the top 8 photos would be the inspiration for a short film. This short film was called "When You Find Me" and could be found exclusively on YouTube. In July 2011, Intel and Toshiba partnered together to create Hollywood's first Social Film experience, a thriller called Inside, directed by D.J. Caruso and starring Emmy Rossum. The project is broken up into several segments across multiple social media platforms including Facebook, YouTube, and Twitter. In this instance, the audience is challenged to help Emmy Rossum's character, Christina, safely make it out of the room she's been trapped in. This particular form of social film is a major undertaking in that it combines social media activity with A-list acting talent to create a user experience that all happens in real time. Although not quite the same idea, Hollywood also started experimenting with the idea of interactive and crowd-sourced films. One of the first examples of this was a short film called "Life In A Day" directed by Kevin Macdonald and produced by Ridley Scott. Kevin asked people from all over the world to submit videos onto YouTube of what they were doing on July 24th, 2010. They combined all of the best videos that were submitted together to create one film of people doing different things all around the world, no matter how boring or simple those things seemed. They took this short to film festivals before releasing it to the public on YouTube in 2011. In August 2012, Intel and Toshiba partnered again to create The Beauty Inside, directed by Drake Doremus, starring Mary Elizabeth Winstead and Topher Grace. It's Hollywood's first social film that gives everyone in the audience a chance to play Alex, the lead role. The experience will be broken up into six filmed episodes interspersed with real-time interactive storytelling that all takes place on Alex's Facebook timeline. In August 2013, Intel and Toshiba released their third entry into the category, The Power Inside, directed by Will Speck and Josh Gordon and starring Harvey Keitel, Analeigh Tipton, and Craig Roberts. It's Hollywood's first social film that asks the audience to audition to help save or destroy the world. The experience is broken up into six filmed episodes interspersed with user-generated content and interactive storytelling on the main character's Facebook timeline. In 2015, Intel partnered with Dell for their fourth entry, What Lives Inside directed by Robert Stromberg and starring Colin Hanks, Catherine O'Hara, and J. K. Simmons. The first of four episodes was released on Hulu on March 25, 2015.

  Read more →
• 

  Security and Privacy in Computer Systems

  Security and Privacy in Computer Systems is a paper by Willis Ware that was first presented to the public at the 1967 Spring Joint Computer Conference. == Significance == Ware's presentation was the first public conference session about information security and privacy in respect of computer systems, especially networked or remotely-accessed ones. The IEEE Annals of the History of Computing said that Ware's 1967 Spring Joint Computer Conference session, together with 1970's Ware report, marked the start of the field of computer security.

  Read more →
• 

  ISO 15765-2

  ISO 15765-2, or ISO-TP (Transport Layer), is an international standard for sending data packets over a CAN bus. The protocol allows for the transport of messages that exceed the eight byte maximum payload of CAN frames. ISO-TP segments longer messages into multiple frames, adding metadata (CAN-TP Header) that allows the interpretation of individual frames and reassembly into a complete message packet by the recipient. It can carry up to 232-1 (4294967295) bytes of payload per message packet starting from the 2016 version. Prior versions were limited to a maximum payload size of 4095 bytes. In the OSI model, ISO-TP covers the layer 3 (network layer) and 4 (transport layer). The most common application for ISO-TP is the transfer of diagnostic messages with OBD-II equipped vehicles using KWP2000 and UDS, but is used broadly in other application-specific CAN implementations where one might need to send messages longer than what the CAN protocol physical layer allows (eight bytes for CAN, 64 bytes for CAN FD, and 2048 bytes for CAN-XL). ISO-TP can be operated with its own addressing as so-called Extended Addressing or without address using only the CAN ID (so-called Normal Addressing). Extended addressing uses the first data byte of each frame as an additional element of the address, reducing the application payload by one byte. For clarity the protocol description below is based on Normal Addressing with eight byte CAN frames. In total, six types of addressing are allowed by the ISO 15765-2 Protocol. ISO-TP prepends one or more metadata bytes to the payload data in the eight byte CAN frame, reducing the payload to seven or fewer bytes per frame. The metadata is called the Protocol Control Information, or PCI. The PCI is one, two or three bytes. The initial field is four bits indicating the frame type, and implicitly describing the PCI length. ISO 15765-2 is a part of ISO 15765 (headlined Road vehicles — Diagnostic communication over Controller Area Network (DoCAN)), which has the following parts: ISO 15765-1 Part 1: General information and use case definition ISO 15765-2 Part 2: Transport protocol and network layer services ISO 15765-3 Part 3: Implementation of unified diagnostic services (UDS on CAN) – replaced by ISO 14229-3 Road vehicles — Unified diagnostic services ISO 15765-4 Part 4: Requirements for emissions-related systems == List of protocol control information (PCI) field types == The ISO-TP defines four frame types: A message of seven bytes or less is sent in a single frame, with the initial byte containing the type (0) and payload length (1-7 bytes). With the 0 in the type field, this can also pass as a simpler protocol with a length-data format and is often misinterpreted as such. A message longer than 7 bytes requires segmenting the message packet over multiple frames. A segmented transfer starts with a First Frame. The PCI is two bytes in this case, with the first 4 bit field the type (type 1) and the following 12 bits the message length (excluding the type and length bytes). The recipient confirms the transfer with a flow control frame. The flow control frame has three PCI bytes specifying the interval between subsequent frames and how many consecutive frames may be sent (Block Size). For CAN FD, the ISO 15765-2 protocol has been extended for Single and First frame, to allow larger size values, but still backwards compatible with traditional ISO 15765. See CAN FD. The initial byte contains the type (type = 3) in the first four bits, and a flag in the next four bits indicating if the transfer is allowed (0 = Continue To Send, 1 = Wait, 2 = Overflow/abort). The next byte is the block size, the count of frames that may be sent before waiting for the next flow control frame. A value of zero allows the remaining frames to be sent without flow control or delay. The third byte is the minimum Separation Time (STmin), the minimum delay time between frames. STmin values up to 127 (0x7F) specify the minimum number of milliseconds to delay between frames, while values in the range 241 (0xF1) to 249 (0xF9) specify delays increasing from 100 to 900 microseconds. Note that the Separation Time is defined as the minimum time between the end of one frame to the beginning of the next. Robust implementations should be prepared to accept frames from a sender that misinterprets this as the frame repetition rate i.e. from start-of-frame to start-of-frame. Even careful implementations may fail to account for the minor effect of bit-stuffing in the physical layer. The sender transmits the rest of the message using Consecutive Frames. Each Consecutive Frame has a one byte PCI, with a four bit type (type = 2) followed by a 4-bit sequence number. The sequence number starts at 1 and increments with each frame sent (1, 2,..., F, 0, 1,...), with which lost or discarded frames can be detected. Each consecutive frame starts at 0, initially for the first set of data in the first frame will be considered as 0th data. So the first set of CF(Consecutive frames) start from 0x1. There afterwards when it reaches 0x2F, will be started from 0x20 (e.g. 0x21, 0x22, 0x23...0x2F, 0x20, 0x21...). The 12-bit length field (as indicated in the First Frame) allows up to 4095 bytes of user data in a segmented message, but in practice the typical application-specific limit is considerably lower because of receive buffer or hardware limitations. == Timing parameters == Timing parameters, such as P1 and P2 timers, have to be mentioned. == Standards == ISO 15765-2:2016 Road vehicles -- Diagnostic communication over Controller Area Network (DoCAN) -- Part 2: Transport protocol and network layer services

  Read more →
• 

  Tumblr

  Tumblr ( TUM-blər) is a microblogging and social media platform founded by David Karp in 2007 and operated by American company Tumblr, Inc., a subsidiary of Automattic. The service allows users to post multimedia and other content to a short-form blog. It has attracted significant attention and controversy for hosting a wide range of progressive user-generated content. == History == === Beginnings (2006–2012) === Development of Tumblr began in 2006 during a two-week gap between contracts at David Karp's software consulting company, Davidville. Karp had been interested in tumblelogs (short-form blogs, hence the name Tumblr) for some time and was waiting for one of the established blogging platforms to introduce their own tumblelogging platform. As none had done so after a year of waiting, Karp and developer Marco Arment began working on their own platform. Tumblr was launched in February 2007, and within two weeks had gained 75,000 users. Arment left the company in September 2010 to work on Instapaper. In June 2012, Tumblr featured its first major brand advertising campaign in collaboration with Adidas, who launched an official soccer Tumblr blog and bought ad placements on the user dashboard. This launch came only two months after Tumblr announced it would be moving towards paid advertising on its site. === Ownership by Yahoo! (2013–2018) === On May 20, 2013, it was announced that Yahoo and Tumblr had reached an agreement for Yahoo! Inc. to acquire Tumblr for $1.1 billion in cash. Many of Tumblr's users were unhappy with the news, causing some to start a petition, achieving nearly 170,000 signatures. David Karp remained CEO and the deal was finalized on June 20, 2013. Advertising sales goals were not met and in 2016 Yahoo wrote down $712 million of Tumblr's value. Verizon Communications acquired Yahoo in June 2017, and placed Yahoo and Tumblr under its Oath subsidiary. Karp announced in November 2017 that he would be leaving Tumblr by the end of the year. Jeff D'Onofrio, Tumblr's president and COO, took over leading the company. The site, along with the rest of the Oath division (renamed Verizon Media Group in 2019), continued to struggle under Verizon. In March 2019, Similarweb estimated Tumblr had lost 30% of its user traffic since December 2018, when the site had introduced a stricter content policy with heavier restrictions on adult content (which had been a notable draw to the service). In May 2019, it was reported that Verizon was considering selling the site due to its continued struggles since the purchase (as it had done with another Yahoo property, Flickr, via its sale to SmugMug). Following this news, Pornhub's vice president publicly expressed interest in purchasing Tumblr, with a promise to reinstate the previous adult content policies. === Automattic (2019–present) === On August 12, 2019, Verizon Media announced that it would sell Tumblr to Automattic, the operator of blog service WordPress.com and corporate backer of the open source blog software of the same name. The sale was for an undisclosed amount, but Axios reported that the sale price was less than $3 million, less than 0.3% of Yahoo's original purchase price. Automattic CEO Matt Mullenweg stated that the site will operate as a complementary service to WordPress.com, and that there were no plans to reverse the content policy decisions made during Verizon ownership. In November 2022, Mullenweg stated that Tumblr will add support for the decentralized social networking protocol ActivityPub. In November 2023, most of Tumblr's product development and marketing teams were transferred to other groups within Automattic. Mullenweg stated that focus would shift to core functionality and streamlining existing features. In February 2024, Automattic announced that it would begin selling user data from Tumblr and WordPress.com to Midjourney and OpenAI. Tumblr users are opted-in by default, with an option to opt out. In August 2024, Automattic announced that it would migrate Tumblr's backend to an architecture derived from WordPress, in order to ease development and code sharing between the platforms. The company stated that this migration would not impact the service's user experience and content, and that users "won't even notice a difference from the outside". In January 2025, Mullenweg stated that the migration, once completed, would also "unlock" ActivityPub access for Tumblr, including native support for the company's official ActivityPub plugin for WordPress. In April 2025, Automattic announced layoffs for 16% of its workforce, reducing a large portion of Tumblr staff. On March 16, 2026, Tumblr implemented a change to how notes were assigned to reblogs, making it more similar to sites like Twitter and Bluesky. The change was rolled back the next day after heavy user backlash. == Features == === Blog management === Dashboard: The dashboard is the primary tool for the typical Tumblr user. It is a live feed of recent posts from blogs that they follow. Through the dashboard, users are able to comment, reblog, and like posts from other blogs that appear on their dashboard. The dashboard allows the user to upload text posts, images, videos, quotes, or links to their blog with a click of a button displayed at the top of the dashboard. Users are also able to connect their blogs to their Twitter and Facebook accounts, so that whenever they make a post, it will also be sent as a tweet and a status update. As of June 2022, users can also turn off reblogs on specific posts through the dashboard. Queue: Users are able to set up a schedule to delay posts that they make. They can spread their posts over several hours or even days. Tags: Users can help their audience find posts about certain topics by adding tags. If someone were to upload a picture to their blog and wanted their viewers to find pictures, they would add the tag #picture, and their viewers could use that word to search for posts with the tag #picture. HTML editing: Tumblr allows users to edit their blog's theme using HTML to control the appearance of their blog. Custom themes are able to be shared and used by other users, or sold. Custom domains: Tumblr allows users to use custom domains for their blogs. Users must purchase a domain from Tumblr Domains, an in-house registrar that provides domains that can only be used with Tumblr unless removed from the user's blog and transferred to another registrar. Blogs previously were able to be linked with any domain/subdomain from any registrar, however following the introduction of the Tumblr Domains service, now requires you to purchase a domain directly from Tumblr to be used with a blog. Users who kept their blogs connected to a domain after the introduction got to keep their custom domain, as long as they do not disconnect it from Tumblr or let the domain expire. === Tags === The tagging system on the website operates on a hybrid tagging system, involving both self-tagging (user write their own tags on their posts) and an auto-manual function (the website will recommend popular tags and ones that the user has used before.) Only the first 20 tags added to any post will be indexed by the site. The tags are prefaced by a hashtag and separated by commas, and spaces and special characters are allowed, but only up to 140 characters total per tag. There are two main types used by Tumblr users: descriptive tagging, and opinion or commentary tagging. Descriptive tags are usually introduced by the original poster, and describe what is in the post (e.g. #art, #sky). These are important for the original poster to use, so their post will be indexed and searchable by others wishing to view that subject of content. Tags used as a form of communication are unique to Tumblr, and are typically more personal, expressing opinions, reactions, meta-commentary, background information, and more. Instead of adding onto the reblogged post (with their comments becoming an addition to each subsequent reblog from them) a user may add their comments in the tags, not changing the content or appearance of the original post in any way. Not all users choose to use tags this way, but those who do use tags for commentary may prefer it over adding a comment on the actual post. === Mobile === With Tumblr's 2009 acquisition of Tumblerette, an iOS application created by Jeff Rock and Garrett Ross, the service launched its official iPhone app. The site became available to BlackBerry smartphones on April 17, 2010, via a Mobelux application in BlackBerry World. In June 2012, Tumblr released a new version of its iOS app, Tumblr 3.0, allowing support for Spotify integration, hi-res images and offline access. An app for Android is also available. A Windows Phone app was released on April 23, 2013. An app for Google Glass was released on May 16, 2013. === Inbox and messaging === Tumblr blogs have the option to allow users to submit questions, either as themselves or anonymously, to the blog for a response. Tumblr

  Read more →