AI Generator Zdjec Za Darmo

AI Generator Zdjec Za Darmo — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Supermind AI

  Supermind is a state-funded Chinese artificial intelligence platform that tracks scientists and researchers internationally. The platform is the flagship project of Shenzhen's International Science and Technology Information Center. It mines data from science and technology databases such as Springer, Wiley, Clarivate and Elsevier. It is intended to detect technological breakthroughs and to identify possible sources of talent as part of China's efforts to advance technologically. The platform also uses government data security and security intelligence organizations such as Peng Cheng Laboratory, the China National GeneBank, BGI Group and the Key Laboratory of New Technologies of Security Intelligence. According to Hong Kong-based Asia Times, the platform, "While not an overt espionage tool...may be used to identify key personnel who could be bribed, deceived or manipulated into divulging classified information". The Organisation for Economic Co-operation and Development (OECD) flagged the project as an incident, meaning it may be of interest to policymakers and other stakeholders. US technology group American Edge Project criticized the project as a global risk of China's security services using the platform to place agents in jobs with access to important information, recruit technical personnel, and identify targets for hacking operations.

  Read more →
• 

  Locality-sensitive hashing

  In computer science, locality-sensitive hashing (LSH) is a fuzzy hashing technique that hashes similar input items into the same "buckets" with high probability. The number of buckets is much smaller than the universe of possible input items. Since similar items end up in the same buckets, this technique can be used for data clustering and nearest neighbor search. It differs from conventional hashing techniques in that hash collisions are maximized, not minimized. Alternatively, the technique can be seen as a way to reduce the dimensionality of high-dimensional data; high-dimensional input items can be reduced to low-dimensional versions while preserving relative distances between items. Hashing-based approximate nearest-neighbor search algorithms generally use one of two main categories of hashing methods: either data-independent methods, such as locality-sensitive hashing (LSH); or data-dependent methods, such as locality-preserving hashing (LPH). Locality-preserving hashing was initially devised as a way to facilitate data pipelining in implementations of massively parallel algorithms that use randomized routing and universal hashing to reduce memory contention and network congestion. == Definitions == A finite family F {\displaystyle {\mathcal {F}}} of functions h : M → S {\displaystyle h\colon M\to S} is defined to be an LSH family for a metric space M = ( M , d ) {\displaystyle {\mathcal {M}}=(M,d)} , a threshold r > 0 {\displaystyle r>0} , an approximation factor c > 1 {\displaystyle c>1} , and probabilities p 1 > p 2 {\displaystyle p_{1}>p_{2}} if it satisfies the following condition. For any two points a , b ∈ M {\displaystyle a,b\in M} and a hash function h {\displaystyle h} chosen uniformly at random from F {\displaystyle {\mathcal {F}}} : If d ( a , b ) ≤ r {\displaystyle d(a,b)\leq r} , then h ( a ) = h ( b ) {\displaystyle h(a)=h(b)} (i.e., a and b collide) with probability at least p 1 {\displaystyle p_{1}} , If d ( a , b ) ≥ c r {\displaystyle d(a,b)\geq cr} , then h ( a ) = h ( b ) {\displaystyle h(a)=h(b)} with probability at most p 2 {\displaystyle p_{2}} . Such a family F {\displaystyle {\mathcal {F}}} is called ( r , c r , p 1 , p 2 ) {\displaystyle (r,cr,p_{1},p_{2})} -sensitive. === LSH with respect to a similarity measure === Alternatively it is possible to define an LSH family on a universe of items U endowed with a similarity function ϕ : U × U → [ 0 , 1 ] {\displaystyle \phi \colon U\times U\to [0,1]} . In this setting, a LSH scheme is a family of hash functions H coupled with a probability distribution D over H such that a function h ∈ H {\displaystyle h\in H} chosen according to D satisfies P r [ h ( a ) = h ( b ) ] = ϕ ( a , b ) {\displaystyle Pr[h(a)=h(b)]=\phi (a,b)} for each a , b ∈ U {\displaystyle a,b\in U} . === Amplification === Given a ( d 1 , d 2 , p 1 , p 2 ) {\displaystyle (d_{1},d_{2},p_{1},p_{2})} -sensitive family F {\displaystyle {\mathcal {F}}} , we can construct new families G {\displaystyle {\mathcal {G}}} by either the AND-construction or OR-construction of F {\displaystyle {\mathcal {F}}} . To create an AND-construction, we define a new family G {\displaystyle {\mathcal {G}}} of hash functions g, where each function g is constructed from k random functions h 1 , … , h k {\displaystyle h_{1},\ldots ,h_{k}} from F {\displaystyle {\mathcal {F}}} . We then say that for a hash function g ∈ G {\displaystyle g\in {\mathcal {G}}} , g ( x ) = g ( y ) {\displaystyle g(x)=g(y)} if and only if all h i ( x ) = h i ( y ) {\displaystyle h_{i}(x)=h_{i}(y)} for i = 1 , 2 , … , k {\displaystyle i=1,2,\ldots ,k} . Since the members of F {\displaystyle {\mathcal {F}}} are independently chosen for any g ∈ G {\displaystyle g\in {\mathcal {G}}} , G {\displaystyle {\mathcal {G}}} is a ( d 1 , d 2 , p 1 k , p 2 k ) {\displaystyle (d_{1},d_{2},p_{1}^{k},p_{2}^{k})} -sensitive family. To create an OR-construction, we define a new family G {\displaystyle {\mathcal {G}}} of hash functions g, where each function g is constructed from k random functions h 1 , … , h k {\displaystyle h_{1},\ldots ,h_{k}} from F {\displaystyle {\mathcal {F}}} . We then say that for a hash function g ∈ G {\displaystyle g\in {\mathcal {G}}} , g ( x ) = g ( y ) {\displaystyle g(x)=g(y)} if and only if h i ( x ) = h i ( y ) {\displaystyle h_{i}(x)=h_{i}(y)} for one or more values of i. Since the members of F {\displaystyle {\mathcal {F}}} are independently chosen for any g ∈ G {\displaystyle g\in {\mathcal {G}}} , G {\displaystyle {\mathcal {G}}} is a ( d 1 , d 2 , 1 − ( 1 − p 1 ) k , 1 − ( 1 − p 2 ) k ) {\displaystyle (d_{1},d_{2},1-(1-p_{1})^{k},1-(1-p_{2})^{k})} -sensitive family. == Applications == LSH has been applied to several problem domains, including: Near-duplicate detection Hierarchical clustering Genome-wide association study Image similarity identification VisualRank Gene expression similarity identification Audio similarity identification Nearest neighbor search Audio fingerprint Digital video fingerprinting Shared memory organization in parallel computing Physical data organization in database management systems Training fully connected neural networks Computer security Machine learning == Methods == === Bit sampling for Hamming distance === One of the easiest ways to construct an LSH family is by bit sampling. This approach works for the Hamming distance over d-dimensional vectors { 0 , 1 } d {\displaystyle \{0,1\}^{d}} . Here, the family F {\displaystyle {\mathcal {F}}} of hash functions is simply the family of all the projections of points on one of the d {\displaystyle d} coordinates, i.e., F = { h : { 0 , 1 } d → { 0 , 1 } ∣ h ( x ) = x i for some i ∈ { 1 , … , d } } {\displaystyle {\mathcal {F}}=\{h\colon \{0,1\}^{d}\to \{0,1\}\mid h(x)=x_{i}{\text{ for some }}i\in \{1,\ldots ,d\}\}} , where x i {\displaystyle x_{i}} is the i {\displaystyle i} th coordinate of x {\displaystyle x} . A random function h {\displaystyle h} from F {\displaystyle {\mathcal {F}}} simply selects a random bit from the input point. This family has the following parameters: P 1 = 1 − R / d {\displaystyle P_{1}=1-R/d} , P 2 = 1 − c R / d {\displaystyle P_{2}=1-cR/d} . That is, any two vectors x , y {\displaystyle x,y} with Hamming distance at most R {\displaystyle R} collide under a random h {\displaystyle h} with probability at least P 1 {\displaystyle P_{1}} . Any x , y {\displaystyle x,y} with Hamming distance at least c R {\displaystyle cR} collide with probability at most P 2 {\displaystyle P_{2}} . === Min-wise independent permutations === Suppose U is composed of subsets of some ground set of enumerable items S and the similarity function of interest is the Jaccard index J. If π is a permutation on the indices of S, for A ⊆ S {\displaystyle A\subseteq S} let h ( A ) = min a ∈ A { π ( a ) } {\displaystyle h(A)=\min _{a\in A}\{\pi (a)\}} . Each possible choice of π defines a single hash function h mapping input sets to elements of S. Define the function family H to be the set of all such functions and let D be the uniform distribution. Given two sets A , B ⊆ S {\displaystyle A,B\subseteq S} the event that h ( A ) = h ( B ) {\displaystyle h(A)=h(B)} corresponds exactly to the event that the minimizer of π over A ∪ B {\displaystyle A\cup B} lies inside A ∩ B {\displaystyle A\cap B} . As h was chosen uniformly at random, P r [ h ( A ) = h ( B ) ] = J ( A , B ) {\displaystyle Pr[h(A)=h(B)]=J(A,B)\,} and ( H , D ) {\displaystyle (H,D)\,} define an LSH scheme for the Jaccard index. Because the symmetric group on n elements has size n!, choosing a truly random permutation from the full symmetric group is infeasible for even moderately sized n. Because of this fact, there has been significant work on finding a family of permutations that is "min-wise independent" — a permutation family for which each element of the domain has equal probability of being the minimum under a randomly chosen π. It has been established that a min-wise independent family of permutations is at least of size lcm ⁡ { 1 , 2 , … , n } ≥ e n − o ( n ) {\displaystyle \operatorname {lcm} \{\,1,2,\ldots ,n\,\}\geq e^{n-o(n)}} , and that this bound is tight. Because min-wise independent families are too big for practical applications, two variant notions of min-wise independence are introduced: restricted min-wise independent permutations families, and approximate min-wise independent families. Restricted min-wise independence is the min-wise independence property restricted to certain sets of cardinality at most k. Approximate min-wise independence differs from the property by at most a fixed ε. === Open source methods === ==== Nilsimsa Hash ==== Nilsimsa is a locality-sensitive hashing algorithm used in anti-spam efforts. The goal of Nilsimsa is to generate a hash digest of an email message such that the digests of two similar messages are similar to each other. The paper suggests that the Nilsimsa satisfies three requirements: The digest identifying each message should not

  Read more →
• 

  Generalized iterative scaling

  In statistics, generalized iterative scaling (GIS) and improved iterative scaling (IIS) are two early algorithms used to fit log-linear models, notably multinomial logistic regression (MaxEnt) classifiers and extensions of it such as MaxEnt Markov models and conditional random fields. These algorithms have been largely surpassed by gradient-based methods such as L-BFGS and coordinate descent algorithms.

  Read more →
• 

  Yooreeka

  Yooreeka is a library for data mining, machine learning, soft computing, and mathematical analysis. The project started with the code of the book "Algorithms of the Intelligent Web". Although the term "Web" prevailed in the title, in essence, the algorithms are valuable in any software application. It covers all major algorithms and provides many examples. Yooreeka 2.x is licensed under the Apache License rather than the somewhat more restrictive LGPL (which was the license of v1.x). The library is written 100% in the Java language. == Algorithms == The following algorithms are covered: Clustering Hierarchical—Agglomerative (e.g. MST single link; ROCK) and Divisive Partitional (e.g. k-means) Classification Bayesian Decision trees Neural Networks Rule based (via Drools) Recommendations Collaborative filtering Content based Search PageRank DocRank Personalization

  Read more →
• 

  AVS Video Editor

  AVS Video Editor is a video editing software published by Online Media Technologies Ltd. It is a part of AVS4YOU software suite which includes video, audio, image editing and conversion, disc editing and burning, document conversion and registry cleaner programs. It offers the opportunity to create and edit videos with a vast variety of video and audio effects, text and transitions; capture video from screen, web or DV cameras and VHS tape; record voice; create menus for discs, as well as to save them to plenty of video file formats, burn to discs or publish on Facebook, YouTube, Flickr, etc. == Description == === Interface === The layout consists of the timeline or storyboard view, preview pane and media library (transitions, video effects, text or disc menus) collections. The storyboard view shows the sequence of video clips with the transitions between them and used to change the order of clips or add transitions. Timeline view consists of main video, audio, effects, video overlay and text lines for editing. Once on the timeline video can be duplicated, split, muted, frozen, cropped, stabilized, its speed can be slowed down or increased, audio and color corrected. === Importing footage === Video, audio and image files necessary for video project can be imported into the program from computer hard disk drive. User can also capture video from computer screen, web or mini DV camera, as well as from VHS tape, record voice. === Output (web, device, disc, format) === AVS Video Editor gives the opportunity to save video to a computer hard drive to one of the video formats: AVI, DVD, Blu-ray, MOV, MP4, M4V, MPEG, WMV, MKV, WebM, M2TS, TS, FLV, SWF, RM, 3GP, GIF, DPG, AMV, MTV; burn to DVD or Blu-ray disc with menus; create a video for mobile players, mobile phones or gaming consoles and upload it right to the device. The most popular devices such as Apple iPod, Apple iPhone, Apple iPad, Sony PSP, Samsung Galaxy, Android and BlackBerry smartphones and tablets are supported. There is also an option to create a video that can be streamed via web and save it into Flash or WebM format or for the popular web services: YouTube, Facebook, Telly (Twitvid), Dailymotion, Flickr and Dropbox. === Features === Single and multithread modes: if a computer supports multi-threading, video creation process is performed faster in multithread mode, especially on a multi-core system. Customization of the output file settings, such as bitrate, frame rate, frame size, video and audio codecs, etc. Transitions - help video clips smoothly go into one another, dissolve or overlap two video or image files. Fade in and fade out video and audio files - dissolve a video to and from a blank image, reduce the audio volume at the end of the video and increase at the beginning. Slideshow creation - create a presentation of a series of still images. Voice recording Projects - once a project is created and saved, the next time saving video to some other format will be fast, projects are also used if a user do not have a possibility to create, edit and save video all at once. Video overlay option - superpose video image over the video clip that is being edited. Disk menu and chapters creation - an option for DVD and Blu-ray video. Freeze frame - make a still shot from a video clip. Stabilization feature - reduce jittering or blurring caused by shaky motions of a camera. Enhanced deinterlacing method - increase video quality for interlaced input file - spots and blurred areas are compensated. Scene detection - search and separate one scene of the video from the other. Loop DVD and SWF - output SWF and DVD video are played back continuously. Caching for processing high definition files - create a duplicate video file smaller in size to use it on the preview window and accelerate processing of HD files. Chroma key option - add video overlay half transparent so that only part of it is visible and all the rest disappears to reveal the video underneath. Capture video material from DV tapes, VHS tapes, web cameras, etc. Movie closing credits - add information on movie editing, e.g. crew, cast, data, etc. Creeping line, subtitles, text - add different captions (static and animated), shapes and images to video. Speech balloons and other graphic objects - geometrical shapes to highlight an object in the video. Zoom effect - magnify or reduce the view of the image. Rotate effect - rotate video image at different degrees, e.g. 90, 180, etc. Grayscale and old movie effects - create a black and white video image. Old movie adds also scratches, noise, shake and dust to video, as if it's being played on an old projector. Blur and sharpen effects - visually smooth and soften an image, or make video image better focused. Snow and particles effects - adds snow or various objects (bubbles, flowers, leaves, butterflies etc.) that are moving, flying or falling on the video. Pan and zoom Timer, countdown effects - add a timepiece that measures or counts down a time interval to the video being edited. Snapshots - capture a particular moment of a video clip. Sound track replacement - mute audio track from video and add another one. Audio amplify, noise removal, equalizer, etc. - make video sound louder, attenuate the noise, change frequency pattern of the audio, make some other audio adjustments. Trim and multi-trim options - change video clip duration cutting out unnecessary parts or detect scenes and cut out parts in any place of the video clip. Color correction (brightness, temperature, contrast, saturation, gamma, etc.) effects - allow adjustment of tonal range, color, and sharpness of video files. Crop scale effect - get rid of mattes that appear after changing aspect ratio of a video file. Adjusting the Playback Speed Volume and balance - change sound volume in the output video. Change volume value proportion for main video and added soundtrack, completely mute main video audio and leave added soundtrack only, etc. === Utilities embedded into AVS Video Editor === AVS Mobile Uploader is used to transfer edited and converted media files to portable devices via Bluetooth, Infrared or USB connection. AVS Video Burner is used to burn converted video files to different disc types: CD, DVD, Blu-ray. AVS Video Recorder is used to capture video from analog video sources and supports different types of devices: capture card, web camera (webcam), DV camera, HDV camera. AVS Video Uploader is used to transfer video files to popular video-sharing websites, like Facebook, Dailymotion, YouTube, Photobucket, TwitVid, MySpace, Flickr. AVS Screen Capture is used to capture any actions on the desktop to make presentations or video tutorials more vivid and easily comprehensible. == Important upgrades == The initial release of AVS Video Editor was in 2003 when the program was offered inside AVS software bundles together with AVS Video Tools, AVS Audio Tools and DVD Copy software. In 2005 the program is offered as a part of multifunctional AVS4YOU software suite. AVS Video Editor is frequently updated. The main updates include adding several important features for video editing

  Read more →
• 

  Teaching dimension

  In computational learning theory, the teaching dimension of a concept class C is defined to be max c ∈ C { w C ( c ) } {\displaystyle \max _{c\in C}\{w_{C}(c)\}} , where w C ( c ) {\displaystyle {w_{C}(c)}} is the minimum size of a witness set for c in C. Intuitively, this measures the number of instances that are needed to identify a concept in the class, using supervised learning with examples provided by a helpful teacher who is trying to convey the concept as succinctly as possible. This definition was formulated in 1995 by Sally Goldman and Michael Kearns, based on earlier work by Goldman, Ron Rivest, and Robert Schapire. The teaching dimension of a finite concept class can be used to give a lower and an upper bound on the membership query cost of the concept class. In Stasys Jukna's book "Extremal Combinatorics", a lower bound is given for the teaching dimension in general: Let C be a concept class over a finite domain X. If the size of C is greater than 2 k ( | X | k ) , {\displaystyle 2^{k}{|X| \choose k},} then the teaching dimension of C is greater than k. However, there are more specific teaching models that make assumptions about teacher or learner, and can get lower values for the teaching dimension. For instance, several models are the classical teaching (CT) model, the optimal teacher (OT) model, recursive teaching (RT), preference-based teaching (PBT), and non-clashing teaching (NCT).

  Read more →
• 

  Algorithmic learning theory

  Algorithmic learning theory is a mathematical framework for analyzing machine learning problems and algorithms. Synonyms include formal learning theory and algorithmic inductive inference. Algorithmic learning theory is different from statistical learning theory in that it does not make use of statistical assumptions and analysis. Both algorithmic and statistical learning theory are concerned with machine learning and can thus be viewed as branches of computational learning theory. == Distinguishing characteristics == Unlike statistical learning theory and most statistical theory in general, algorithmic learning theory does not assume that data are random samples, that is, that data points are independent of each other. This makes the theory suitable for domains where observations are (relatively) noise-free but not random, such as language learning and automated scientific discovery. The fundamental concept of algorithmic learning theory is learning in the limit: as the number of data points increases, a learning algorithm should converge to a correct hypothesis on every possible data sequence consistent with the problem space. This is a non-probabilistic version of statistical consistency, which also requires convergence to a correct model in the limit, but allows a learner to fail on data sequences with probability measure 0 . Algorithmic learning theory investigates the learning power of Turing machines. Other frameworks consider a much more restricted class of learning algorithms than Turing machines, for example, learners that compute hypotheses more quickly, for instance in polynomial time. An example of such a framework is probably approximately correct learning . == Learning in the limit == The concept was introduced in E. Mark Gold's seminal paper "Language identification in the limit". The objective of language identification is for a machine running one program to be capable of developing another program by which any given sentence can be tested to determine whether it is "grammatical" or "ungrammatical". The language being learned need not be English or any other natural language - in fact the definition of "grammatical" can be absolutely anything known to the tester. In Gold's learning model, the tester gives the learner an example sentence at each step, and the learner responds with a hypothesis, which is a suggested program to determine grammatical correctness. It is required of the tester that every possible sentence (grammatical or not) appears in the list eventually, but no particular order is required. It is required of the learner that at each step the hypothesis must be correct for all the sentences so far. A particular learner is said to be able to "learn a language in the limit" if there is a certain number of steps beyond which its hypothesis no longer changes. At this point it has indeed learned the language, because every possible sentence appears somewhere in the sequence of inputs (past or future), and the hypothesis is correct for all inputs (past or future), so the hypothesis is correct for every sentence. The learner is not required to be able to tell when it has reached a correct hypothesis, all that is required is that it be true. Gold showed that any language which is defined by a Turing machine program can be learned in the limit by another Turing-complete machine using enumeration. This is done by the learner testing all possible Turing machine programs in turn until one is found which is correct so far - this forms the hypothesis for the current step. Eventually, the correct program will be reached, after which the hypothesis will never change again (but note that the learner does not know that it won't need to change). Gold also showed that if the learner is given only positive examples (that is, only grammatical sentences appear in the input, not ungrammatical sentences), then the language can only be guaranteed to be learned in the limit if there are only a finite number of possible sentences in the language (this is possible if, for example, sentences are known to be of limited length). Language identification in the limit is a highly abstract model. It does not allow for limits of runtime or computer memory which can occur in practice, and the enumeration method may fail if there are errors in the input. However the framework is very powerful, because if these strict conditions are maintained, it allows the learning of any program known to be computable. This is because a Turing machine program can be written to mimic any program in any conventional programming language. See Church-Turing thesis. == Other identification criteria == Learning theorists have investigated other learning criteria, such as the following. Efficiency: minimizing the number of data points required before convergence to a correct hypothesis. Mind Changes: minimizing the number of hypothesis changes that occur before convergence. Mind change bounds are closely related to mistake bounds that are studied in statistical learning theory. Kevin Kelly has suggested that minimizing mind changes is closely related to choosing maximally simple hypotheses in the sense of Occam’s Razor. == Annual conference == Since 1990, there is an International Conference on Algorithmic Learning Theory (ALT), called Workshop in its first years (1990–1997). Between 1992 and 2016, proceedings were published in the LNCS series. Starting from 2017, they are published by the Proceedings of Machine Learning Research. The 34th conference will be held in Singapore in Feb 2023. The topics of the conference cover all of theoretical machine learning, including statistical and computational learning theory, online learning, active learning, reinforcement learning, and deep learning.

  Read more →
• 

  Witness set

  In combinatorics and computational learning theory, a witness set is a set of elements that distinguishes a given Boolean function from a given class of other Boolean functions. Let C {\displaystyle C} be a concept class over a domain X {\displaystyle X} (that is, a family of Boolean functions over X {\displaystyle X} ) and c {\displaystyle c} be a concept in X {\displaystyle X} (a single Boolean function). A subset S {\displaystyle S} of X {\displaystyle X} is a witness set for c {\displaystyle c} in X {\displaystyle X} if S {\displaystyle S} distinguishes c {\displaystyle c} from all the other functions in C {\displaystyle C} , in the sense that no other function in C {\displaystyle C} has the same values on S {\displaystyle S} . For a concept class with | C | {\displaystyle |C|} concepts, there exists a concept that has a witness of size at most log 2 ⁡ | C | {\displaystyle \log _{2}|C|} ; this bound is tight when C {\displaystyle C} consists of all Boolean functions over X {\displaystyle X} . By a result of Bondy (1972) there exists a single witness set of size at most | C | − 1 {\displaystyle |C|-1} that is valid for all concepts in C {\displaystyle C} ; this bound is tight when C {\displaystyle C} consists of the indicator functions of the empty set and some singleton sets. One way to construct this set is to interpret the concepts as bitstrings, and the domain elements as positions in these bitstrings. Then the set of positions at which a trie of the bitstrings branches forms the desired witness set. This construction is central to the operation of the fusion tree data structure. The minimum size of a witness set for c {\displaystyle c} is called the witness size or specification number and is denoted by w C ( c ) {\displaystyle w_{C}(c)} . The value max { w C ( c ) : c ∈ C } {\displaystyle \max\{w_{C}(c):c\in C\}} is called the teaching dimension of C {\displaystyle C} . It represents the number of examples of a concept that need to be presented by a teacher to a learner, in the worst case, to enable the learner to determine which concept is being presented. Witness sets have also been called teaching sets, keys, specifying sets, or discriminants. The "witness set" terminology is from Kushilevitz et al. (1996), who trace the concept of witness sets to work by Cover (1965).

  Read more →
• 

  Concurrent MetateM

  Concurrent MetateM is a multi-agent language in which each agent is programmed using a set of (augmented) temporal logic specifications of the behaviour it should exhibit. These specifications are executed directly to generate the behaviour of the agent. As a result, there is no risk of invalidating the logic as with systems where logical specification must first be translated to a lower-level implementation. The root of the MetateM concept is Gabbay's separation theorem; any arbitrary temporal logic formula can be rewritten in a logically equivalent past → future form. Execution proceeds by a process of continually matching rules against a history, and firing those rules when antecedents are satisfied. Any instantiated future-time consequents become commitments which must subsequently be satisfied, iteratively generating a model for the formula made up of the program rules. == Temporal Connectives == The Temporal Connectives of Concurrent MetateM can divided into two categories, as follows: Strict past time connectives: '●' (weak last), '◎' (strong last), '◆' (was), '■' (heretofore), 'S' (since), and 'Z' (zince, or weak since). Present and future time connectives: '◯' (next), '◇' (sometime), '□' (always), 'U' (until), and 'W' (unless). The connectives {◎,●,◆,■,◯,◇,□} are unary; the remainder are binary. === Strict past time connectives === ==== Weak last ==== ●ρ is satisfied now if ρ was true in the previous time. If ●ρ is interpreted at the beginning of time, it is satisfied despite there being no actual previous time. Hence "weak" last. ==== Strong last ==== ◎ρ is satisfied now if ρ was true in the previous time. If ◎ρ is interpreted at the beginning of time, it is not satisfied because there is no actual previous time. Hence "strong" last. ==== Was ==== ◆ρ is satisfied now if ρ was true in any previous moment in time. ==== Heretofore ==== ■ρ is satisfied now if ρ was true in every previous moment in time. ==== Since ==== ρSψ is satisfied now if ψ is true at any previous moment and ρ is true at every moment after that moment. ==== Zince, or weak since ==== ρZψ is satisfied now if (ψ is true at any previous moment and ρ is true at every moment after that moment) OR ψ has not happened in the past. === Present and future time connectives === ==== Next ==== ◯ρ is satisfied now if ρ is true in the next moment in time. ==== Sometime ==== ◇ρ is satisfied now if ρ is true now or in any future moment in time. ==== Always ==== □ρ is satisfied now if ρ is true now and in every future moment in time. ==== Until ==== ρUψ is satisfied now if ψ is true at any future moment and ρ is true at every moment prior. ==== Unless ==== ρWψ is satisfied now if (ψ is true at any future moment and ρ is true at every moment prior) OR ψ does not happen in the future.

  Read more →
• 

  Margin classifier

  In machine learning (ML), a margin classifier is a type of classification model which is able to give an associated distance from the decision boundary for each data sample. For instance, if a linear classifier is used, the distance (typically Euclidean, though others may be used) of a sample from the separating hyperplane is the margin of that sample. The notion of margins is important in several ML classification algorithms, as it can be used to bound the generalization error of these classifiers. These bounds are frequently shown using the VC dimension. The generalization error bound in boosting algorithms and support vector machines is particularly prominent. == Margin for boosting algorithms == The margin for an iterative boosting algorithm given a dataset with two classes can be defined as follows: the classifier is given a sample pair ( x , y ) {\displaystyle (x,y)} , where x ∈ X {\displaystyle x\in X} is a domain space and y ∈ Y = { − 1 , + 1 } {\displaystyle y\in Y=\{-1,+1\}} is the sample's label. The algorithm then selects a classifier h j ∈ C {\displaystyle h_{j}\in C} at each iteration j {\displaystyle j} where C {\displaystyle C} is a space of possible classifiers that predict real values. This hypothesis is then weighted by α j ∈ R {\displaystyle \alpha _{j}\in R} as selected by the boosting algorithm. At iteration t {\displaystyle t} , the margin of a sample x {\displaystyle x} can thus be defined as y ∑ j t α j h j ( x ) ∑ | α j | . {\displaystyle {\frac {y\sum _{j}^{t}\alpha _{j}h_{j}(x)}{\sum |\alpha _{j}|}}.} By this definition, the margin is positive if the sample is labeled correctly, or negative if the sample is labeled incorrectly. This definition may be modified and is not the only way to define the margin for boosting algorithms. However, there are reasons why this definition may be appealing. == Examples of margin-based algorithms == Many classifiers can give an associated margin for each sample. However, only some classifiers utilize information of the margin while learning from a dataset. Many boosting algorithms rely on the notion of a margin to assign weight to samples. If a convex loss is utilized (as in AdaBoost or LogitBoost, for instance) then a sample with a higher margin will receive less (or equal) weight than a sample with a lower margin. This leads the boosting algorithm to focus weight on low-margin samples. In non-convex algorithms (e.g., BrownBoost), the margin still dictates the weighting of a sample, though the weighting is non-monotone with respect to the margin. == Generalization error bounds == One theoretical motivation behind margin classifiers is that their generalization error may be bound by the algorithm parameters and a margin term. An example of such a bound is for the AdaBoost algorithm. Let S {\displaystyle S} be a set of m {\displaystyle m} data points, sampled independently at random from a distribution D {\displaystyle D} . Assume the VC-dimension of the underlying base classifier is d {\displaystyle d} and m ≥ d ≥ 1 {\displaystyle m\geq d\geq 1} . Then, with probability 1 − δ {\displaystyle 1-\delta } , we have the bound: P D ( y ∑ j t α j h j ( x ) ∑ | α j | ≤ 0 ) ≤ P S ( y ∑ j t α j h j ( x ) ∑ | α j | ≤ θ ) + O ( 1 m d log 2 ⁡ ( m / d ) / θ 2 + log ⁡ ( 1 / δ ) ) {\displaystyle P_{D}\left({\frac {y\sum _{j}^{t}\alpha _{j}h_{j}(x)}{\sum |\alpha _{j}|}}\leq 0\right)\leq P_{S}\left({\frac {y\sum _{j}^{t}\alpha _{j}h_{j}(x)}{\sum |\alpha _{j}|}}\leq \theta \right)+O\left({\frac {1}{\sqrt {m}}}{\sqrt {d\log ^{2}(m/d)/\theta ^{2}+\log(1/\delta )}}\right)} for all θ > 0 {\displaystyle \theta >0} .

  Read more →
• 

  Probabilistic latent semantic analysis

  Probabilistic latent semantic analysis (PLSA), also known as probabilistic latent semantic indexing (PLSI, especially in information retrieval circles) is a statistical technique for the analysis of two-mode and co-occurrence data. In effect, one can derive a low-dimensional representation of the observed variables in terms of their affinity to certain hidden variables, just as in latent semantic analysis, from which PLSA evolved. Compared to standard latent semantic analysis which stems from linear algebra and downsizes the occurrence tables (usually via a singular value decomposition), probabilistic latent semantic analysis is based on a mixture decomposition derived from a latent class model. == Model == Considering observations in the form of co-occurrences ( w , d ) {\displaystyle (w,d)} of words and documents, PLSA models the probability of each co-occurrence as a mixture of conditionally independent multinomial distributions: P ( w , d ) = ∑ c P ( d ) P ( c | d ) P ( w | c ) = P ( d ) ∑ c P ( c | d ) P ( w | c ) {\displaystyle P(w,d)=\sum _{c}P(d)P(c|d)P(w|c)=P(d)\sum _{c}P(c|d)P(w|c)} with c {\displaystyle c} being the words' topic. Note that the number of topics is a hyperparameter that must be chosen in advance and is not estimated from the data. The first formulation is the symmetric formulation, where w {\displaystyle w} and d {\displaystyle d} are both generated from the latent class c {\displaystyle c} in similar ways (using the conditional probabilities P ( d | c ) {\displaystyle P(d|c)} and P ( w | c ) {\displaystyle P(w|c)} ), whereas the second formulation is the asymmetric formulation, where, for each document d {\displaystyle d} , a latent class is chosen conditionally to the document according to P ( c | d ) {\displaystyle P(c|d)} , and a word is then generated from that class according to P ( w | c ) {\displaystyle P(w|c)} . Although we have used words and documents in this example, the co-occurrence of any couple of discrete variables may be modelled in exactly the same way. So, the number of parameters is equal to c d + w c {\displaystyle cd+wc} . The number of parameters grows linearly with the number of documents. In addition, although PLSA is a generative model of the documents in the collection it is estimated on, it is not a generative model of new documents. Their parameters are learned using the EM algorithm. == Application == PLSA may be used in a discriminative setting, via Fisher kernels. PLSA has applications in information retrieval and filtering, natural language processing, machine learning from text, bioinformatics, and related areas. It is reported that the aspect model used in the probabilistic latent semantic analysis has severe overfitting problems. == Extensions == Hierarchical extensions: Asymmetric: MASHA ("Multinomial ASymmetric Hierarchical Analysis") Symmetric: HPLSA ("Hierarchical Probabilistic Latent Semantic Analysis") Generative models: The following models have been developed to address an often-criticized shortcoming of PLSA, namely that it is not a proper generative model for new documents. Latent Dirichlet allocation – adds a Dirichlet prior on the per-document topic distribution Higher-order data: Although this is rarely discussed in the scientific literature, PLSA extends naturally to higher order data (three modes and higher), i.e. it can model co-occurrences over three or more variables. In the symmetric formulation above, this is done simply by adding conditional probability distributions for these additional variables. This is the probabilistic analogue to non-negative tensor factorisation. == History == This is an example of a latent class model (see references therein), and it is related to non-negative matrix factorization. The present terminology was coined in 1999 by Thomas Hofmann.

  Read more →
• 

  Memtransistor

  The memtransistor (a blend word from Memory Transfer Resistor) is an experimental multi-terminal passive electronic component that might be used in the construction of artificial neural networks. It is a combination of the memristor and transistor technology. This technology is different from the 1T-1R approach since the devices are merged into one single entity. Multiple memristors can be embedded with a single transistor, enabling it to more accurately model a neuron with its multiple synaptic connections. A neural network produced from these would provide hardware-based artificial intelligence with a good foundation. == Applications == These types of devices would allow for a synapse model that could realise a learning rule, by which the synaptic efficacy is altered by voltages applied to the terminals of the device. An example of such a learning rule is spike-timing-dependant-plasticty by which the weight of the synapse, in this case the conductivity, could be modulated based on the timing of pre and post synaptic spikes arriving at each terminal. The advantage of this approach over two terminal memristive devices is that read and write protocols have the possibility to occur simultaneously and distinctly.

  Read more →
• 

  Opponent process

  The opponent process is a hypothesis of color vision that states that the human visual system interprets information about color by processing signals from the three types of photoreceptor cells in an antagonistic manner. The three types of cones are called L, M, and S. The names stand for "Long wavelength sensitive,” "middle wavelength sensitive," and "short wavelength sensitive." The opponent-process theory implicates three opponent channels: L versus M, S versus (L+M), and a luminance channel (+ versus -). These cone-opponent mechanisms were at one time thought to be the neural substrate for a psychological theory called Hering's Opponent Colors Theory, which calls for three psychologically important opponent color processes: red versus green, blue versus yellow, and black versus white (luminance). The Opponent Colors Theory is named for the German physiologist Ewald Hering who proposed the idea in the late 19th century. However, it has been argued that Hering’s Opponent Colors Theory lacks adequate phenomenological and empirical support, and may not be a necessary feature of normal human color experience. Correspondingly, considerable physiological and behavioral evidence proves that the physiological cone opponent mechanisms do not constitute the neurobiological basis for Hering's Opponent Colors Theory. == Color theory == === Complementary colors === When staring at a bright color for a while (e.g. red), then looking away at a white field, an afterimage is perceived, such that the original color will evoke its complementary color (cyan, in the case of red input). When complementary colors are combined or mixed, they "cancel each other out" and become neutral (white or gray). That is, complementary colors are never perceived as a mixture; there is no "greenish red" or "yellowish blue", despite claims to the contrary. The strongest color contrast that a color can have is its complementary color. Complementary colors may also be called "opposite colors" and they were originally considered the primary evidence in support of Hering's Opponent Colors Theory. There are two fatal problems with this evidence. First, the complement of red is not green, as called for by Hering's theory; it is bluish-green. And second, there exists a complementary color for every color, so there is nothing special about the set of complementary pairs picked out by Hering's theory. === Unique hues === The colors that define the extremes for each opponent channel are called unique hues, as opposed to composite (mixed) hues. Ewald Hering first defined the unique hues as red, green, blue, and yellow, and based them on the concept that these colors could not be simultaneously perceived. For example, a color cannot appear both red and green. These definitions have been experimentally refined and are represented today by average hue angles of 353° (carmine red), 128° (cobalt green), 228° (cobalt blue), 58° (yellow). The unique hues are a defining feature of many psychological color spaces, but there is substantial evidence showing that the unique hues are not hard wired in the nervous system, contrary to the stipulations of Hering's Opponent Colors Theory. Unique hues can differ between individuals and are often used in psychophysical research to measure variations in color perception due to color-vision deficiencies or color adaptation. While there is considerable inter-subject variability when defining unique hues experimentally, an individual's unique hues are very consistent, to within a few nanometers of wavelength. == Physiological basis == === Relation to LMS color space === The trichromatic theory is in conflict with Hering's Opponent Colors Theory, although it is compatible with a physiological opponent process that compares the outputs of the different classes of cone types. The poles of these cone opponent mechanisms do not correspond to the unique hues of Hering's Opponent Colors Theory and unlike the unique hues, have no privilege in color perception. Most humans have three different cone cells in their retinas that facilitate trichromatic color vision. Colors are determined by the proportional excitation of these three cone types, i.e. their quantum catch. The levels of excitation of each cone type are the parameters that define LMS color space. To calculate the opponent process tristimulus values from the LMS color space, the cone excitations must be compared: The luminous (achromatic) opponent channel is a weighted sum of all three cone cells (plus the rod cells in some conditions). The red–green opponent channel is equal to the difference of the L- and M-cones. The blue–yellow opponent channel is equal to the difference of the S-cone and the average/weighted sum of the L- and M-cones. Most mammals have no L cone (the primate L cone arose from a gene duplication of the M cone opsin gene). These mammals still show two kinds of opponent channels in their retinal ganglion cells: the achromatic channel and the blue-yellow opponency channel. === Cone opponent mechanisms are encoded in the retina === The output of different types of cones are compared by cells in the retina including retina bipolar cells (which compare signals from L and M cones) and bistratified retinal ganglion cells (which compare S cone signals with L and M cone signals). The output of bipolar cells is relayed to the visual cortex by the retinal ganglion cells (RGCs) by way of a thalamic relay station called the lateral geniculate nucleus (LGN) of the thalamus. Much of the scientific knowledge of retinal ganglion cell physiology was obtained by neural recordings of cells in the LGN. The cone-opponent mechanisms in the retina and LGN represent a fundamental physiological opponent process but do not represent the unique hues (or Hering's Opponent Colors Theory). For example, the colors that best elicit responses of the bistratified S-(L+M)-opponent neurons are best described as purplish (or lavender) and lime-green, not "blue" and "yellow". The neurons are sometimes referred to as "blue–yellow" neurons, but this is a historical artifact dating to the time when it was thought that Hering's Opponent Colors Theory was hardwired by the retina and the mismatch between the colors to which they are optimally tuned and Hering's Opponent Colors was overlooked. Cone opponent mechanisms exist in the retinas of many mammals, including monkeys, mice, and cats. In primates, the LGN contains three major classes of layers: Magnocellular layers (M, large-cell) – responsible largely for the luminance channel Parvocellular layers (P, small-cell) – responsible largely for red–green opponency Koniocellular layers (K) – responsible largely for blue–yellow opponency, poor spatial resolution, long latency Other mammals such as cats also have three cell types denoted as X (magno), Y (parvo), and W (konio). The W type is beyond most doubt homologous to the primate K type. There are some subtle differences between the M and X types as well as the Y and P types to make the correspondence unclear. === Advantage === Transmitting information in opponent-channel color space could be advantageous over transmitting it in LMS color space ("raw" signals from each cone type). There is some overlap in the wavelengths of light to which the three types of cones (L for long-wave, M for medium-wave, and S for short-wave light) respond, so it is more efficient for the visual system (from a perspective of dynamic range) to record differences between the responses of cones, rather than each type of cone's individual response. Hurvich and Jameson argued that the use of opponent-channel color space would increase color contrast, making the information easier to process by later stages of vision. === Color blindness === Color blindness can be classified by the cone cell that is affected (protan, deutan, tritan) or by the opponent channel that is affected (red–green or blue–yellow). In either case, the channel can either be inactive (in the case of dichromacy) or have a lower dynamic range (in the case of anomalous trichromacy). For example, individuals with deuteranopia see little difference between the red and green unique hues. == History == Johann Wolfgang von Goethe first studied the physiological effect of opposed colors in his Theory of Colours in 1810. Goethe arranged his color wheel symmetrically "for the colours diametrically opposed to each other in this diagram are those which reciprocally evoke each other in the eye. Thus, yellow demands purple; orange, blue; red, green; and vice versa: Thus again all intermediate gradations reciprocally evoke each other." Ewald Hering proposed opponent color theory in 1892. He thought that the colors red, yellow, green, and blue are special in that any other color can be described as a mix of them, and that they exist in opposite pairs. That is, either red or green is perceived and never greenish-red: Even though yellow is a mixture of red and green in the RGB color theory, humans

  Read more →
• 

  Evolutionary attractor

  An evolutionary attractor is a point in an evolutionary space where a selection process will always drive trait values towards that point from the region around it. Because of the importance of evolution through natural selection, often such an evolutionary space will be defined by genetic or phenotypic traits, or possibly both. In this case the selection process will be a form of natural selection. The existence of an evolutionary attractor in a biological evolutionary space does not always imply that it can be reached from all points in that evolutionary space, nor does it identify what will happen when the evolutionary attractor is reached. While an evolutionary attractor may represent a point in evolutionary space that is resistant to further selection, such as an evolutionarily stable strategy, other possibilities are available. Because identification of an evolutionary attractor on its own does not describe everything about the evolutionary space in which it lies, this has led to interest in the evolutionary dynamics surrounding evolutionary attractors and in evolutionary spaces in general. (Theoretical biologists and mathematicians working in the area may prefer the terms adaptive dynamics or evolutionary invasion analysis to evolutionary dynamics.) These fields use differential equations which allows a more complete understanding of the dynamics in evolutionary spaces including the existence or otherwise of evolutionary attractors. Advances in the study of molecular evolution have also led to the identification of evolutionary attractors at a molecular level. Because biological evolutionary processes have been studied using evolutionary game theory, a technique inspired by game theory originally derived to address economic problems, not only can evolutionary attractors be found in biology but economists studying evolutionary economic models have also identified evolutionary attractors. Evolution in biology has also inspired evolutionary computation in computer science. Many algorithms in this field use a form of selection inspired by natural selection to generate results through evolutionary algorithms. This is therefore another area in which evolutionary attractors have been identified. == Evolutionary attractors in biology == It is not probably not surprising that biology is the field where most examples of evolutionary attractors have been identified, given the importance of evolution through natural selection. === Evolutionary attractors in adaptive landscapes === An evolutionary attractor is a point in genetic and/or phenotypic trait space, that evolution will always drive trait values towards via a selection process. The concept of an evolutionary attractor arose in population genetics following the origin of the adaptive landscape originally proposed by Sewall Wright in 1932. The height of a point in an adaptive landscape is a measure of evolutionary fitness. If a point in an adaptive landscape is a peak, then selection will always drive traits towards it and it will be an evolutionary attractor. While population genetics deals with discrete genetic traits, quantitative genetics extended such concepts to deal with continuous genetic traits, where the concept of evolutionary attractor is also valid. === Evolutionary attractors in evolutionary game models === Evolutionary game theory introduced into evolutionary biology concepts originally used in economics, with the advantage that evolution could be studied in relation to strategic choices made in animal conflicts. This is of particular interest because of the concept of the evolutionarily stable strategy or ESS, a strategy that once established is resistant to invasion by other strategies. ESSs will not always be evolutionary attractors, but if they are they will persist over evolutionary time. === Dynamics around evolutionary attractors in biology === Evolutionary attractors in biology do not exist in isolation. By definition they must exist in an evolutionary trait space where selection drives all traits towards them from a region immediately around them. That is, they must be convergence stable. Eshel (1983) modified the definition of an ESS by considering individually advantageous reduction from a majority deviation: he created the term continuous stability. A continuously stable ESS can be shown to be convergence stable, therefore it will act as an evolutionary attractor. But the nature of evolutionary trait spaces in biology means that it is not possible to guarantee that the region of convergence to the evolutionary attractor covers the whole of the trait space, nor that there is only one evolutionary attractor in a particular trait space. These issues have led to the emergence of the related fields of evolutionary dynamics, adaptive dynamics and evolutionary invasion analysis, all of which use differential equations to understand the dynamics in evolutionary trait spaces. Hence, if one or more evolutionary attractor exists in an evolutionary trait space, they provide techniques to understand the dynamics in that trait space around the evolutionary attractor. === Evolutionary attractors in an ecological context === Evolution in biology does not take place in single species in isolation. Ecological interaction of species leads to coevolution. Important examples of this are host-parasite or host-pathogen interaction, which can make both the dynamics around evolutionary attractors more complex, and the occurrence and number of evolutionary attractors more diverse. Evolutionary attractors have been identified in the analysis of evolutionary epidemiology of plant pathogens. In the above study working on plant populations the authors were able to identify evolutionary attractors using methods from adaptive dynamics. A model applied to the analysis of a maize (Zea mays L.) virus identified convergence stable equilibria through simulation modelling. A related model identified evolutionary attractors in the interaction of plants with fungal pathogens. === Evolutionary attractors in molecular genetics === As mentioned above much of the consideration of evolutionary attractors in biology has been through investigation of selection at a genetic or phenotypic level or both, in a single species or in coevolving species. Advances in the study of molecular genetics now allow the study of evolutionary attractors to be taken to a molecular genetic level. Wilson et. al (2019) studied the evolution of gene regulatory networks and identified the emergence of evolutionary attractors. == Evolutionary attractors in economics == Evolutionary game theory as applied in biology was inspired by game theory originally devised for applications in economics. Game theory remains an active field of research outside of biology, and thus it is not surprising that researchers in evolutionary economics use evolutionary game theory. Evolutionary attractors have been demonstrated by economists studying the evolutionary dynamics of market entry with market dynamics based on the replicator dynamics of biological evolutionary games. == Evolutionary attractors in computing == Evolutionary computation is a branch of computer science inspired by biological evolution. Many algorithms in evolutionary computation use a form of selection. Thus evolutionary attractors have been identified in computer science as well as in biology and economics. Evolutionary algorithms have generated evolutionary attractors, probably because of the similarity between adaptive hill-climbing in evolutionary heuristics and the adaptive landscape originated to explain evolution through natural selection.

  Read more →
• 

  Multiple kernel learning

  Multiple kernel learning refers to a set of machine learning methods that use a predefined set of kernels and learn an optimal linear or non-linear combination of kernels as part of the algorithm. Reasons to use multiple kernel learning include a) the ability to select for an optimal kernel and parameters from a larger set of kernels, reducing bias due to kernel selection while allowing for more automated machine learning methods, and b) combining data from different sources (e.g. sound and images from a video) that have different notions of similarity and thus require different kernels. Instead of creating a new kernel, multiple kernel algorithms can be used to combine kernels already established for each individual data source. Multiple kernel learning approaches have been used in many applications, such as event recognition in video, object recognition in images, and biomedical data fusion. == Algorithms == Multiple kernel learning algorithms have been developed for supervised, semi-supervised, as well as unsupervised learning. Most work has been done on the supervised learning case with linear combinations of kernels, however, many algorithms have been developed. The basic idea behind multiple kernel learning algorithms is to add an extra parameter to the minimization problem of the learning algorithm. As an example, consider the case of supervised learning of a linear combination of a set of n {\displaystyle n} kernels K {\displaystyle K} . We introduce a new kernel K ′ = ∑ i = 1 n β i K i {\displaystyle K'=\sum _{i=1}^{n}\beta _{i}K_{i}} , where β {\displaystyle \beta } is a vector of coefficients for each kernel. Because the kernels are additive (due to properties of reproducing kernel Hilbert spaces), this new function is still a kernel. For a set of data X {\displaystyle X} with labels Y {\displaystyle Y} , the minimization problem can then be written as min β , c E ( Y , K ′ c ) + R ( K , c ) {\displaystyle \min _{\beta ,c}\mathrm {E} (Y,K'c)+R(K,c)} where E {\displaystyle \mathrm {E} } is an error function and R {\displaystyle R} is a regularization term. E {\displaystyle \mathrm {E} } is typically the square loss function (Tikhonov regularization) or the hinge loss function (for SVM algorithms), and R {\displaystyle R} is usually an ℓ n {\displaystyle \ell _{n}} norm or some combination of the norms (i.e. elastic net regularization). This optimization problem can then be solved by standard optimization methods. Adaptations of existing techniques such as the Sequential Minimal Optimization have also been developed for multiple kernel SVM-based methods. === Supervised learning === For supervised learning, there are many other algorithms that use different methods to learn the form of the kernel. The following categorization has been proposed by Gonen and Alpaydın (2011) ==== Fixed rules approaches ==== Fixed rules approaches such as the linear combination algorithm described above use rules to set the combination of the kernels. These do not require parameterization and use rules like summation and multiplication to combine the kernels. The weighting is learned in the algorithm. Other examples of fixed rules include pairwise kernels, which are of the form k ( ( x 1 i , x 1 j ) , ( x 2 i , x 2 j ) ) = k ( x 1 i , x 2 i ) k ( x 1 j , x 2 j ) + k ( x 1 i , x 2 j ) k ( x 1 j , x 2 i ) {\displaystyle k((x_{1i},x_{1j}),(x_{2i},x_{2j}))=k(x_{1i},x_{2i})k(x_{1j},x_{2j})+k(x_{1i},x_{2j})k(x_{1j},x_{2i})} . These pairwise approaches have been used in predicting protein-protein interactions. ==== Heuristic approaches ==== These algorithms use a combination function that is parameterized. The parameters are generally defined for each individual kernel based on single-kernel performance or some computation from the kernel matrix. Examples of these include the kernel from Tenabe et al. (2008). Letting π m {\displaystyle \pi _{m}} be the accuracy obtained using only K m {\displaystyle K_{m}} , and letting δ {\displaystyle \delta } be a threshold less than the minimum of the single-kernel accuracies, we can define β m = π m − δ ∑ h = 1 n ( π h − δ ) {\displaystyle \beta _{m}={\frac {\pi _{m}-\delta }{\sum _{h=1}^{n}(\pi _{h}-\delta )}}} Other approaches use a definition of kernel similarity, such as A ( K 1 , K 2 ) = ⟨ K 1 , K 2 ⟩ ⟨ K 1 , K 1 ⟩ ⟨ K 2 , K 2 ⟩ {\displaystyle A(K_{1},K_{2})={\frac {\langle K_{1},K_{2}\rangle }{\sqrt {\langle K_{1},K_{1}\rangle \langle K_{2},K_{2}\rangle }}}} Using this measure, Qui and Lane (2009) used the following heuristic to define β m = A ( K m , Y Y T ) ∑ h = 1 n A ( K h , Y Y T ) {\displaystyle \beta _{m}={\frac {A(K_{m},YY^{T})}{\sum _{h=1}^{n}A(K_{h},YY^{T})}}} ==== Optimization approaches ==== These approaches solve an optimization problem to determine parameters for the kernel combination function. This has been done with similarity measures and structural risk minimization approaches. For similarity measures such as the one defined above, the problem can be formulated as follows: max β , tr ⁡ ( K t r a ′ ) = 1 , K ′ ≥ 0 A ( K t r a ′ , Y Y T ) . {\displaystyle \max _{\beta ,\operatorname {tr} (K'_{tra})=1,K'\geq 0}A(K'_{tra},YY^{T}).} where K t r a ′ {\displaystyle K'_{tra}} is the kernel of the training set. Structural risk minimization approaches that have been used include linear approaches, such as that used by Lanckriet et al. (2002). We can define the implausibility of a kernel ω ( K ) {\displaystyle \omega (K)} to be the value of the objective function after solving a canonical SVM problem. We can then solve the following minimization problem: min tr ⁡ ( K t r a ′ ) = c ω ( K t r a ′ ) {\displaystyle \min _{\operatorname {tr} (K'_{tra})=c}\omega (K'_{tra})} where c {\displaystyle c} is a positive constant. Many other variations exist on the same idea, with different methods of refining and solving the problem, e.g. with nonnegative weights for individual kernels and using non-linear combinations of kernels. ==== Bayesian approaches ==== Bayesian approaches put priors on the kernel parameters and learn the parameter values from the priors and the base algorithm. For example, the decision function can be written as f ( x ) = ∑ i = 0 n α i ∑ m = 1 p η m K m ( x i m , x m ) {\displaystyle f(x)=\sum _{i=0}^{n}\alpha _{i}\sum _{m=1}^{p}\eta _{m}K_{m}(x_{i}^{m},x^{m})} η {\displaystyle \eta } can be modeled with a Dirichlet prior and α {\displaystyle \alpha } can be modeled with a zero-mean Gaussian and an inverse gamma variance prior. This model is then optimized using a customized multinomial probit approach with a Gibbs sampler. These methods have been used successfully in applications such as protein fold recognition and protein homology problems ==== Boosting approaches ==== Boosting approaches add new kernels iteratively until some stopping criteria that is a function of performance is reached. An example of this is the MARK model developed by Bennett et al. (2002) f ( x ) = ∑ i = 1 N ∑ m = 1 P α i m K m ( x i m , x m ) + b {\displaystyle f(x)=\sum _{i=1}^{N}\sum _{m=1}^{P}\alpha _{i}^{m}K_{m}(x_{i}^{m},x^{m})+b} The parameters α i m {\displaystyle \alpha _{i}^{m}} and b {\displaystyle b} are learned by gradient descent on a coordinate basis. In this way, each iteration of the descent algorithm identifies the best kernel column to choose at each particular iteration and adds that to the combined kernel. The model is then rerun to generate the optimal weights α i {\displaystyle \alpha _{i}} and b {\displaystyle b} . === Semisupervised learning === Semisupervised learning approaches to multiple kernel learning are similar to other extensions of supervised learning approaches. An inductive procedure has been developed that uses a log-likelihood empirical loss and group LASSO regularization with conditional expectation consensus on unlabeled data for image categorization. We can define the problem as follows. Let L = ( x i , y i ) {\displaystyle L={(x_{i},y_{i})}} be the labeled data, and let U = x i {\displaystyle U={x_{i}}} be the set of unlabeled data. Then, we can write the decision function as follows. f ( x ) = α 0 + ∑ i = 1 | L | α i K i ( x ) {\displaystyle f(x)=\alpha _{0}+\sum _{i=1}^{|L|}\alpha _{i}K_{i}(x)} The problem can be written as min f L ( f ) + λ R ( f ) + γ Θ ( f ) {\displaystyle \min _{f}L(f)+\lambda R(f)+\gamma \Theta (f)} where L {\displaystyle L} is the loss function (weighted negative log-likelihood in this case), R {\displaystyle R} is the regularization parameter (Group LASSO in this case), and Θ {\displaystyle \Theta } is the conditional expectation consensus (CEC) penalty on unlabeled data. The CEC penalty is defined as follows. Let the marginal kernel density for all the data be g m π ( x ) = ⟨ ϕ m π , ψ m ( x ) ⟩ {\displaystyle g_{m}^{\pi }(x)=\langle \phi _{m}^{\pi },\psi _{m}(x)\rangle } where ψ m ( x ) = [ K m ( x 1 , x ) , … , K m ( x L , x ) ] T {\displaystyle \psi _{m}(x)=[K_{m}(x_{1},x),\ldots ,K_{m}(x_{L},x)]^{T}} (the kernel distance between the labe

  Read more →