AI Generator Zdjec Za Darmo

AI Generator Zdjec Za Darmo — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Educational robotics

  Educational robotics teaches the design, analysis, application and operation of robots. Robots include articulated robots, mobile robots or autonomous vehicles. Educational robotics can be taught from elementary school to graduate programs. Robotics may also be used to motivate and facilitate the instruction other, often foundational, topics such as computer programming, artificial intelligence or engineering design. == Education and training == Robotics engineers design robots, maintain them, develop new applications for them, and conduct research to expand the potential of robotics. Robots have become a popular educational tool in some middle and high schools, as well as in numerous youth summer camps, raising interest in programming, artificial intelligence and robotics among students. First-year computer science courses at several universities now include programming of a robot in addition to traditional software engineering-based coursework. == Category of Educational robotics == The categories of educational robots seen as having more than one category. It can be alienated into different categories based on their physical design and coding method. Generally they are categorised as arm robots, wheeled mobile robots and humanoid robots. Tangibly, coded robots uses a physical means of coding instead of the screens coding. === Initiatives in schools === Leachim, was a robot teacher programmed with the class curricular, as well as certain biographical information on the 40 students whom it was programmed to teach. Leachim could synthesize human speech using Diphone synthesis. It was invented by Michael J. Freeman in 1974 and was tested in a fourth grade classroom in the Bronx, New York. === Post-secondary degree programs === From approximately 1960 through 2005, robotics education at post-secondary institutions took place through elective courses, thesis experiences and design projects offered as part of degree programs in traditional academic disciplines, such as mechanical engineering, electrical engineering, industrial engineering or computer science. Since 2005, more universities have begun granting degrees in robotics as a discipline in its own right, often under the name "Robotic Engineering". Based on a 2015 web-based survey of robotics educators, the degree programs and their estimates annual graduates are listed alphabetically below. Note that only official degree programs where the word "robotics" appears on the transcript or diploma are listed here; whereas degree programs in traditional disciplines with course concentrations or thesis topics related to robotics are deliberately omitted. === Certification === The Robotics Certification Standards Alliance (RCSA) is an international robotics certification authority that confers various industry- and educational-related robotics certifications. === Summer robotics camp === Several summer camp programs include robotics as part of their core curriculum. In addition, youth summer robotics programs are frequently offered by celebrated museums such as the American Museum of Natural History and The Tech Museum of Innovation in Silicon Valley, CA, just to name a few. There are of benefits that come from attending robotics camps. It teaches students how to use teamwork, resilience and motivation, and decision-making. Students learn teamwork because most camps involve exciting activities requiring teamwork. Resilience and motivation is expected because by completing the challenging programs, students feel talented and accomplished after they complete the program. Also students are given unique situations making them make decisions to further their situation. === Educational robotics in special education === Educational robotics can be a useful tool in early and special education. According to a journal on new perspectives in science education, educational robotics can help to develop abilities that promote autonomy and assist their integration into society. Social and personal skills can also be developed through educational robotics. Using Lego Mindstorms NXT, schoolteachers were able to work with middle school aged children in order to develop programs and improve the children's social and personal skills. Additionally, problem solving skills and creativity were utilized through the creation of artwork and scenery to house the robots. Other studies show the benefits of educational robotics in special education as promoting superior cognitive functions, including executive functions. This can lead to an increased ability in "problem solving, reasoning and planning in typically developing preschool children." Through eight weeks of weekly forty-five-minute group sessions using the Bee-Bot, an increase in interest, attention, and interaction between both peers and adults was found in the school and preschool-aged children with Down Syndrome. This study suggests that educational robotics in the classroom can also lead to an improvement in visuo-spatial memory and mental planning. Furthermore, executive functions seemed to be possible in one child during this study.

  Read more →
• 

  Cancer Likelihood in Plasma

  Cancer Likelihood in Plasma (CLiP) refers to a set of ensemble learning methods for integrating various genomic features useful for the noninvasive detection of early cancers from blood plasma. An application of this technique for early detection of lung cancer (Lung-CLiP) was originally described by Chabon et al. (2020) from the labs of Ash Alizadeh and Max Diehn at Stanford. This method relies on several improvements to cancer personalized profiling by deep sequencing (CAPP-Seq) for analysis of circulating tumor DNA (ctDNA). The CLiP technique integrates multiple distinctive genomic features of a cancer of interest findings within a machine-learning framework for cancer detection. For example, studies have shown that the majority of somatic mutations found in cell-free DNA (cfDNA) are not tumor derived, but instead reflect clonal hematopoeisis (also known as CHIP). Even though CHIP tends to target specific genes, it also involves many generally non-recurrent mutations that can be shed from leukocytes and detected in cfDNA, regardless of whether profiling patients with cancer and healthy adults. However, genuine tumor derived ctDNA mutations can be distinguished from CHIP-derived mutations. This is because unlike tumor-derived mutations, CHIP-derived mutations that are shed from leukocytes into plasma tend to occur on longer cfDNA fragments, and to lack specific mutational signatures such as those associated with tobacco smoking in lung cancer that are also found in tumor derived ctDNA molecules. CLiP integrates these features within hierarchical ensemble machine learning models that consider somatic mutations and copy number alternations, among other features. While the CLiP method is unique in relying exclusively on mutations and copy number alterations, it is related to a variety of other liquid biopsy methods being commercially developed for early cancer detection using ctDNA and proteins (e.g., CancerSEEK / DETECT-A ), cfDNA fragmentation patterns (e.g., DELFI), and DNA methylation (e.g., cfMeDIP-Seq, Grail). While the CLiP method has not yet been broadly applied for population-based cancer screening, it has been shown to distinguish discriminate early-stage lung cancers from risk-matched controls across multiple cohorts of patients enrolled across the US.

  Read more →
• 

  In-place algorithm

  In computer science, an in-place algorithm is an algorithm that operates directly on the input data structure without requiring extra space proportional to the input size. In other words, it modifies the input in place, without creating a separate copy of the data structure. An algorithm which is not in-place is sometimes called not-in-place or out-of-place. In-place can have slightly different meanings. In its strictest form, the algorithm can only have a constant amount of extra space, counting everything including function calls and pointers. However, this form is very limited as simply having an index to a length n array requires O(log n) bits. More broadly, in-place means that the algorithm does not use extra space for manipulating the input but may require a small though non-constant extra space for its operation. Usually, this space is O(log n), though sometimes anything in o(n) is allowed. Note that space complexity also has varied choices in whether or not to count the index lengths as part of the space used. Often, the space complexity is given in terms of the number of indices or pointers needed, ignoring their length. In this article, we refer to total space complexity (DSPACE), counting pointer lengths. Therefore, the space requirements here have an extra log n factor compared to an analysis that ignores the lengths of indices and pointers. An algorithm may or may not count the output as part of its space usage. Since in-place algorithms usually overwrite their input with output, no additional space is needed. When writing the output to write-only memory or a stream, it may be more appropriate to only consider the working space of the algorithm. In theoretical applications such as log-space reductions, it is more typical to always ignore output space (in these cases it is more essential that the output is write-only). == Examples == Given an array a of n items, suppose we want an array that holds the same elements in reversed order and to dispose of the original. One seemingly simple way to do this is to create a new array of equal size, fill it with copies from a in the appropriate order and then delete a. function reverse(a[0..n - 1]) allocate b[0..n - 1] for i from 0 to n - 1 b[n − 1 − i] := a[i] return b Unfortunately, this requires O(n) extra space for having the arrays a and b available simultaneously. Also, allocation and deallocation are often slow operations. Since we no longer need a, we can instead overwrite it with its own reversal using this in-place algorithm which will only need constant number (2) of integers for the auxiliary variables i and tmp, no matter how large the array is. function reverse_in_place(a[0..n-1]) for i from 0 to floor((n-2)/2) tmp := a[i] a[i] := a[n − 1 − i] a[n − 1 − i] := tmp As another example, many sorting algorithms rearrange arrays into sorted order in-place, including: bubble sort, comb sort, selection sort, insertion sort, heapsort, and Shell sort. These algorithms require only a few pointers, so their space complexity is O(log n). Quicksort operates in-place on the data to be sorted. However, quicksort requires O(log n) stack space pointers to keep track of the subarrays in its divide and conquer strategy. Consequently, quicksort needs O(log2 n) additional space. Although this non-constant space technically takes quicksort out of the in-place category, quicksort and other algorithms needing only O(log n) additional pointers are usually considered in-place algorithms. Most selection algorithms are also in-place, although some considerably rearrange the input array in the process of finding the final, constant-sized result. Some text manipulation algorithms such as trim and reverse may be done in-place. == In computational complexity == In computational complexity theory, the strict definition of in-place algorithms includes all algorithms with O(1) space complexity, the class DSPACE(1). This class is very limited; it equals the regular languages. In fact, it does not even include any of the examples listed above. Algorithms are usually considered in L, the class of problems requiring O(log n) additional space, to be in-place. This class is more in line with the practical definition, as it allows numbers of size n as pointers or indices. This expanded definition still excludes quicksort, however, because of its recursive calls. Identifying the in-place algorithms with L has some interesting implications; for example, it means that there is a (rather complex) in-place algorithm to determine whether a path exists between two nodes in an undirected graph, a problem that requires O(n) extra space using typical algorithms such as depth-first search (a visited bit for each node). This in turn yields in-place algorithms for problems such as determining if a graph is bipartite or testing whether two graphs have the same number of connected components. == Role of randomness == In many cases, the space requirements of an algorithm can be drastically cut by using a randomized algorithm. For example, if one wishes to know if two vertices in a graph of n vertices are in the same connected component of the graph, there is no known simple, deterministic, in-place algorithm to determine this. However, if we simply start at one vertex and perform a random walk of about 20n3 steps, the chance that we will stumble across the other vertex provided that it is in the same component is very high. Similarly, there are simple randomized in-place algorithms for primality testing such as the Miller–Rabin primality test, and there are also simple in-place randomized factoring algorithms such as Pollard's rho algorithm. == In functional programming == Functional programming languages often discourage or do not support explicit in-place algorithms that overwrite data, since this is a type of side effect; instead, they only allow new data to be constructed. However, good functional language compilers will often recognize when an object very similar to an existing one is created and then the old one is thrown away, and will optimize this into a simple mutation "under the hood". Note that it is possible in principle to carefully construct in-place algorithms that do not modify data (unless the data is no longer being used), but this is rarely done in practice.

  Read more →
• 

  Enterprise data planning

  Enterprise data planning is the starting point for enterprise wide change. It states the destination and describes how you will get there. It defines benefits, costs and potential risks. It provides measures to be used along the way to judge progress and adjust the journey according to changing circumstances. Data is fundamental to investment enterprises. Effective, economic management of data underpins operations and enables transformations needed to satisfy customer demands, competition and regulation. Data warehouse(s) and other aspects of the overall data architecture are critical to the enterprise. EDMworks has created a strategic data planning approach for the Investment Sector. It consists of a planning process, planning intranets, templates and training materials. EDMworks planning process is based on the belief that extensive domain knowledge significantly shortens planning iterations and enables progressively higher quality plans to be produced and implemented. This approach drives the development of an effective and economic enterprise data architecture. Enterprise data planning is based on proven business disciplines. Key architectural layers for data and applications are then added in order to provide an enterprise wide understanding of the uses and interdependencies of data. This enables the definition of the core components of the EDM plan: Industry structure and business objectives Assessment of systems and services Target architecture for applications, data and infrastructure Target organization structures Systems, database, infrastructure and organizational plans Business case, costs, benefits, results and risks. EDMworks uses several components from the Open Systems Group TOGAF enterprise systems planning process. TOGAF acts as an extension to good business planning methods to provide a framework for the development of the systems and data architectural components. == History == James Martin was one of the pathfinders in data planning methodologies. He was one of the first to identify data as being an enterprise wide asset that required management. He developed a series of tools and methods to support that process. Most of the large consulting firms developed their own methods to address the same basic issue. Frequently, their approaches were incorporated into their own branded system development methodologies that encompassed the complete systems development life-cycle. Others, such as Ed Tozer, developed more focused offerings that dealt with the complexities of extracting key business needs from senior management and then defining relevant architectural visions for the specific enterprise. From these various sources, the concepts of Business, Data, Applications and Technology Architectures emerged. The Open Group Architectural Framework (TOGAF) has taken this work forward and has established a sound method in TOGAF version 9. EDMworks approach is to adopt these planning and architectural practices as a basis and then add two additional dimensions to the planning and implementation focus: Domain knowledge of the Investments sector. Investments is a complex global industry with a common set of characteristics about clients, information vendors, competition and regulation. Domain knowledge significantly improves the quality of the planning and implementation processes Development of people and teams. Change is a major feature of in any Enterprise Data Management program and people and teams both need development in order to make EDM effective throughout an organization.

  Read more →
• 

  Uniphore

  Uniphore is an American software company that develops artificial intelligence platforms for business use. The company is headquartered in Palo Alto, California, with offices in the United States, United Kingdom, Spain, Israel, United Arab Emirates, and India. Uniphore is known for its "Business AI Cloud," an enterprise AI platform that combines data, knowledge, models, and software agents for use in sales, marketing, and service. The company has also acquired firms in video emotion AI, AI agents, low-code automation, knowledge automation, voice and screen capture, customer data platforms, and data engineering. == History == Uniphore Software Systems was founded by Umesh Sachdev and Ravi Saraogi in 2008 and was incubated at IIT Madras. The company received an initial grant of $100,000 from the National Research Development Corporation. Early work focused on speech technologies for emerging markets. Uniphore partnered with companies that specialized in English and European languages, and adapting the technology for Indian languages and dialects. In 2014, Uniphore released its first flagship products, auMina, along with two other products, Akeira and amVoice. Uniphore raised series A funding, led by Kris Gopalakrishnan (cofounder of Infosys), in April 2015. The next month, Uniphore received additional investment from IDG Ventures. With input from its investors, Uniphore changed its business model from license fee-based income to a software as a service-based subscription fee model in 2015. By June 2016, it had added more than 70 global languages and expanded its services to Southeast Asia, the Middle East, and the United States. The company opened operations in Singapore in October 2016. The company raised Series B funding in October 2017, led by John Chambers and existing investors. Series C funding of $51 million was announced in August 2019 and led by March Capital. Uniphore acquired an exclusive third-party license for robotic process automation technology from NTT DATA in October 2020. In January 2021, Uniphore acquired Emotion Research Lab, a startup based in Spain that uses artificial intelligence and machine learning to analyze video and interpret emotions. The company received $140 million in Series D funding, led by Sorenson Capital Partners, in March 2021, bringing total funding to $210 million. In January 2021, Uniphore acquired Emotion Research Lab. In July 2021, it agreed to acquire Jacada, a provider of low-code/no-code automation; the transaction closed in October 2021. On February 16, 2022, Uniphore announced a $400 million Series E financing led by NEA, which valued the company at $2.5 billion. Hilarie Koplow-McAdams, an NEA venture partner and former Salesforce/New Relic executive, joined Uniphore's board in 2022. Uniphore's board has also included former Cisco CEO John Chambers, former Convergys CEO Andrea J. Ayers, and CrowdStrike CFO Burt Podbere (appointed January 2021). In February 2023, Uniphore acquired UK-based Red Box, a platform for capturing voice and screen recordings used in regulated and large-scale environments. It also acquired France-based Hexagone, a behavioral analytics firm combining computer vision and natural-language techniques. On December 5, 2024, Uniphore announced agreements to acquire ActionIQ, a customer data platform (CDP) vendor, and Infoworks, an enterprise data engineering platform. Uniphore launched the Business AI Cloud on June 9, 2025. The Business AI Cloud consists of a single, unified platform that includes data, knowledge, AI models, and AI agents. Uniphore announced in August 2025 that it had acquired Orby AI and intended to acquire Autonom8 to extend multi-agent and workflow automation capabilities. As of September 2025, Uniphore's customers included the United States Coast Guard, Singapore Police Force, London Underground, DirecTV, JPMorgan Chase, LG, DHL, UPS, Vodafone, Verizon, NTT Data, and as of May 2021, Firstsource. In October 2025, Uniphore raised $260 million in a Series F round at a reported valuation of $2.5 billion. Investors included March Capital, NEA, Nvidia, AMD, Snowflake, and Databricks. In January 2026, KPMG and Uniphore announced a collaboration focused on deploying AI agents powered by specialized small language models. The announcement was made at the World Economic Forum held in Davos. Cognizant and Uniphore announced a partnership in February 2026 to develop industry-specific AI tools for regulated sectors, which would initially focus on life sciences and finance. Uniphore and Rackspace also announced a partnership in March 2026. This partnership was announced in order to create an "Infrastructure-to-Agents" architecture, focusing on Business AI as a private cloud service. == Products == As of 2025, Uniphore's core offering is the Business AI Cloud and Business AI Suite of agentic AI applications. === Business AI Cloud === Uniphore’s Business AI Cloud is a full-stack platform that organizes enterprise data and knowledge for agentic AI applications. The platform enables deployment across clouds and existing data sources. Key layers and capabilities include the following. Agentic layer: Includes prebuilt agents, a natural-language agent builder, and orchestration based on Business Process Model and Notation (BPMN) to run AI workflows across business units. Model layer: Supports an open, interoperable mix of closed and open-source large language models (LLMs). Models can be orchestrated, governed, and replaced as needed. Knowledge layer: Organizes raw data into structured knowledge used for retrieval, explainability, and fine-tuning of small language models (SLMs). Data layer: Connects to data across multiple platforms and clouds through a zero-copy, composable fabric, enabling in-place preparation and supporting data residency and sovereignty requirements. === Business AI Suite === The Uniphore Business AI Suite has various prebuilt AI agents that can be used in customer service, sales, marketing, and human resources. The Uniphore Business AI Suite includes several LOBs (Lines of Business) for business functions with intelligent agents that are prebuilt, but composable. Built on the Uniphore Business AI Cloud, each application combines agentic automation and fine-tuned models. Marketing AI, Customer Service AI, Sales AI, and People AI (for human resources) are included. Competitors include Palantir, Microsoft Azure, Amazon Bedrock, Google's Vertex AI, Databricks, and Snowflake. == Recognition == Deloitte Technology Fast 50 India identified Uniphore as the 17th fastest-growing technology company in India in 2012 and one of the top 500 fastest growing companies in the Asia-Pacific region in 2014. In 2016, Time included Sachdev on its list of "10 millennials who are changing the world" for “building a phone that can understand almost any language”. NASSCOM named Uniphore to its "League of 10" emerging Indian technology companies in 2017. In 2020, the San Francisco Business Times ranked Uniphore as No. 7 among small companies in its list of the best places to work in the San Francisco Bay Area. In 2022, the company was featured on the Forbes AI 50 list. Uniphore was mentioned in the Deloitte Technology Fast 500 list in 2023, 2024, and 2025. In 2025, Inc. included Uniphore in its Best in Business program.

  Read more →
• 

  How to Solve it by Computer

  How to Solve it by Computer is a computer science book by R. G. Dromey, first published by Prentice-Hall in 1982. It is occasionally used as a textbook, especially in India. It is an introduction to the whys of algorithms and data structures. Features of the book: The design factors associated with problems, The creative process behind coming up with innovative solutions for algorithms and data structures, The line of reasoning behind the constraints, factors and the design choices made. The very fundamental algorithms portrayed by this book are mostly presented in pseudocode and/or Pascal notation.

  Read more →
• 

  Synthetic data

  Synthetic data are artificially generated data not produced by real-world events. Typically created using algorithms, synthetic data can be deployed to validate mathematical models and to train machine learning models. Data generated by a computer simulation can be seen as synthetic data. This encompasses most applications of physical modeling, such as music synthesizers or flight simulators. The output of such systems approximates the real thing, but is fully algorithmically generated. Synthetic data is used in a variety of fields as a filter for information that would otherwise compromise the confidentiality of particular aspects of the data. In many sensitive applications, datasets theoretically exist but cannot be released to the general public; synthetic data sidesteps the privacy issues that arise from using real consumer information without permission or compensation. == Usefulness == Synthetic data is generated to meet specific needs or certain conditions that may not be found in the original, real data. One of the hurdles in applying up-to-date machine learning approaches for complex scientific tasks is the scarcity of labeled data, a gap effectively bridged by the use of synthetic data, which closely replicates real experimental data. This can be useful when designing many systems, from simulations based on theoretical value, to database processors, etc. This helps detect and solve unexpected issues such as information processing limitations. Synthetic data are often generated to represent the authentic data and allows a baseline to be set. Another benefit of synthetic data is to protect the privacy and confidentiality of authentic data, while still allowing for use in testing systems. Computer security experts claim generated synthetic data "... enables us to create realistic behavior profiles for users and attackers. The data is used to train the fraud detection system itself, thus creating the necessary adaptation of the system to a specific environment." In defense and military contexts, synthetic data is seen as a potentially valuable tool to develop and improve complex AI systems, particularly in contexts where high-quality real-world data is scarce. At the same time, synthetic data together with the testing approach can give the ability to model real-world scenarios. == History == Scientific modelling of physical systems has a long history that runs concurrent with the history of physics. For example, research into synthesis of audio and voice can be traced back to the 1930s and before, driven forward by the developments of the telephone and audio recording technologies. Digitization gave rise to software synthesizers from the 1970s onwards. In the context of privacy-preserving statistical analysis, in 1993, the idea of original fully synthetic data was created by Donald Rubin. Rubin originally designed this to synthesize the Decennial Census long form responses for the short form households. He then released samples that did not include any actual long form records - in this he preserved anonymity of the household. Later that year, the idea of original partially synthetic data was created by Little. Little used this idea to synthesize the sensitive values on the public use file. A 1993 work fitted a statistical model to 60,000 MNIST digits, then it was used to generate over 1 million examples. Those were used to train a LeNet-4 to reach state of the art performance. In 1994, Stephen Fienberg introduced 'critical refinement', in which a parametric posterior predictive distribution (instead of a Bayes bootstrap) is used to do the sampling. Later, other important contributors to the development of synthetic data generation were Trivellore Raghunathan, Jerry Reiter, Donald Rubin, John M. Abowd, and Jim Woodcock. Collectively they came up with a solution for how to treat partially synthetic data with missing data. Similarly, they developed the technique of Sequential Regression Multivariate Imputation. == Calculations == Researchers test the framework on synthetic data, which is "the only source of ground truth on which they can objectively assess the performance of their algorithms". Synthetic data can be generated through the use of random lines, having different orientations and starting positions. Datasets can get fairly complicated. A more complicated dataset can be generated by using a synthesizer build. To create a synthesizer build, first use the original data to create a model or equation that fits the data the best. This model or equation will be called a synthesizer build. This build can be used to generate more data. Constructing a synthesizer build involves constructing a statistical model. In a linear regression line example, the original data can be plotted, and a best fit linear line can be created from the data. This line is a synthesizer created from the original data. The next step will be generating more synthetic data from the synthesizer build or from this linear line equation. In this way, the new data can be used for studies and research, and it protects the confidentiality of the original data. David Jensen from the Knowledge Discovery Laboratory explains how to generate synthetic data: "Researchers frequently need to explore the effects of certain data characteristics on their data model." To help construct datasets exhibiting specific properties, such as auto-correlation or degree disparity, proximity can generate synthetic data having one of several types of graph structure: random graphs that are generated by some random process; lattice graphs having a ring structure; lattice graphs having a grid structure, etc. In all cases, the data generation process follows the same process: Generate the empty graph structure. Generate attribute values based on user-supplied prior probabilities. Since the attribute values of one object may depend on the attribute values of related objects, the attribute generation process assigns values collectively. == Applications == === Fraud detection and confidentiality systems === Testing and training fraud detection and confidentiality systems are devised using synthetic data. Specific algorithms and generators are designed to create realistic data, which then assists in teaching a system how to react to certain situations or criteria. For example, intrusion detection software is tested using synthetic data. This data is a representation of the authentic data and may include intrusion instances that are not found in the authentic data. The synthetic data allows the software to recognize these situations and react accordingly. If synthetic data was not used, the software would only be trained to react to the situations provided by the authentic data and it may not recognize another type of intrusion. === Scientific research === Researchers doing clinical trials or any other research may generate synthetic data to aid in creating a baseline for future studies and testing. Real data can contain information that researchers may not want released, so synthetic data is sometimes used to protect the privacy and confidentiality of a dataset. Using synthetic data reduces confidentiality and privacy issues since it holds no personal information and cannot be traced back to any individual. Beyond privacy protection, synthetic data is also being explored for methodological innovation in drug development. For instance, synthetic data may be used to construct synthetic control arms as an alternative to conventional external control arms based on real-world data (RWD) or randomized controlled trials (RCTs). Collectively, regulatory agencies such as the FDA and EMA appear to be at various stages of recognizing and integrating AI-generated synthetic data into their methodologies. While there is growing consensus on the potential of such data to support model development and the broader lifecycle of medicinal products, to date no drug or medical device has been approved using solely or predominantly synthetic data—particularly not as a comparator arm generated entirely via data-driven algorithms. The quality and statistical handling of synthetic data are expected to become more prominent in future regulatory discussions, particularly in contexts such as predictive modeling (e.g., digital twins), where innovative approaches have already been referenced. === Machine learning === Synthetic data is increasingly being used for machine learning applications: a model is trained on a synthetically generated dataset with the intention of transfer learning to real data. Efforts have been made to enable more data science experiments via the construction of general-purpose synthetic data generators, such as the Synthetic Data Vault. In general, synthetic data has several natural advantages: once the synthetic environment is ready, it is fast and cheap to produce as much data as needed; synthetic data can have perfectly accurate labels, including labeling that may be very expensive or impo

  Read more →
• 

  Reservoir sampling

  Reservoir sampling is a family of randomized algorithms for choosing a simple random sample, without replacement, of k items from a population of unknown size n in a single pass over the items. The size of the population n is not known to the algorithm and is typically too large for all n items to fit into main memory. The population is revealed to the algorithm over time, and the algorithm cannot look back at previous items. At any point, the current state of the algorithm must permit extraction of a simple random sample without replacement of size k over the part of the population seen so far. == Motivation == Suppose we see a sequence of items, one at a time. We want to keep 10 items in memory, and we want them to be selected at random from the sequence. If we know the total number of items n and can access the items arbitrarily, then the solution is easy: select 10 distinct indices i between 1 and n with equal probability, and keep the i-th elements. The problem is that we do not always know the exact n in advance. == Simple: Algorithm R == A simple and popular but slow algorithm, Algorithm R, was created by Jeffrey Vitter. Initialize an array R {\displaystyle R} indexed from 1 {\displaystyle 1} to k {\displaystyle k} , containing the first k items of the input x 1 , . . . , x k {\displaystyle x_{1},...,x_{k}} . This is the reservoir. For each new input x i {\displaystyle x_{i}} , generate a random number j uniformly in { 1 , . . . , i } {\displaystyle \{1,...,i\}} . If j ∈ { 1 , . . . , k } {\displaystyle j\in \{1,...,k\}} , then set R [ j ] := x i . {\displaystyle R[j]:=x_{i}.} Otherwise, discard x i {\displaystyle x_{i}} . Return R {\displaystyle R} after all inputs are processed. This algorithm works by induction on i ≥ k {\displaystyle i\geq k} . While conceptually simple and easy to understand, this algorithm needs to generate a random number for each item of the input, including the items that are discarded. The algorithm's asymptotic running time is thus O ( n ) {\displaystyle O(n)} . Generating this amount of randomness and the linear run time causes the algorithm to be unnecessarily slow if the input population is large. This is Algorithm R, implemented as follows: == Optimal: Algorithm L == If we generate n {\displaystyle n} random numbers u 1 , . . . , u n ∼ U [ 0 , 1 ] {\displaystyle u_{1},...,u_{n}\sim U[0,1]} independently, then the indices of the smallest k {\displaystyle k} of them is a uniform sample of the k {\displaystyle k} -subsets of { 1 , . . . , n } {\displaystyle \{1,...,n\}} . The process can be done without knowing n {\displaystyle n} : Keep the smallest k {\displaystyle k} of u 1 , . . . , u i {\displaystyle u_{1},...,u_{i}} that has been seen so far, as well as w i {\displaystyle w_{i}} , the index of the largest among them. For each new u i + 1 {\displaystyle u_{i+1}} , compare it with u w i {\displaystyle u_{w_{i}}} . If u i + 1 < u w i {\displaystyle u_{i+1} Read more →

• 

  Autognostics

  Autognostics is a new paradigm that describes the capacity for computer networks to be self-aware. It is considered one of the major components of Autonomic Networking. == Introduction == One of the most important characteristics of today's Internet that has contributed to its success is its basic design principle: a simple and transparent core with intelligence at the edges (the so-called "end-to-end principle"). Based on this principle, the network carries data without knowing the characteristics of that data (e.g., voice, video, etc.) - only the end-points have application-specific knowledge. If something goes wrong with the data, only the edge may be able to recognize that since it knows about the application and what the expected behavior is. The core has no information about what should happen with that data - it only forwards packets. Although an effective and beneficial attribute, this design principle has also led to many of today's problems, limitations, and frustrations. Currently, it is almost impossible for most end-users to know why certain network-based applications do not work well and what they need to do to make it better. Also, network operators who interact with the core in low-level terms such as router configuration have problems expressing their high-level goals into low-level actions. In high-level terms, this may be summarized as a weak coupling between the network and application layers of the overall system. As a consequence of the Internet end-to-end principle, the network performance experienced by a particular application is difficult to attribute based on the behavior of the individual elements. At any given moment, the measure of performance between any two points is typically unknown and applications must operate blindly. As a further consequence, changes to the configuration of given element, or changes in the end-to-end path, cannot easily be validated. Optimization and provisioning cannot then be automated except against only the simplest design specifications. There is an increasing interest in Autonomic Networking research, and a strong conviction that an evolution from the current networking status quo is necessary. Although to date there have not been any practical implementations demonstrating the benefits of an effective autonomic networking paradigm, there seems to be a consensus as to the characteristics which such implementations would need to demonstrate. These specifically include continuous monitoring, identifying, diagnosing and fixing problems based on high-level policies and objectives. Autognostics, as a major part of the autonomic networking concept, intends to bring networks to a new level of awareness and eliminate the lack of visibility which currently exists in today's networks. == Definition == Autognostics is a new paradigm that describes the capacity for computer networks to be self-aware, in part and as a whole, and dynamically adapt to the applications running on them by autonomously monitoring, identifying, diagnosing, resolving issues, subsequently verifying that any remediation was successful, and reporting the impact with respect to the application's use (i.e., providing visibility into the changes to networks and their effects). Although similar to the concept of network awareness, i.e., the capability of network devices and applications to be aware of network characteristics (see References section below), it is noteworthy that autognostics takes that concept one step further. The main difference is the auto part of autognostics, which entails that network devices are self-aware of network characteristics, and have the capability to adapt themselves as a result of continuous monitoring and diagnostics. == Path to autognostics == Autognostics, or in other words deep self-knowledge, can be best described as the ability of a network to know itself and the applications that run on it. This knowledge is used to autonomously adapt to dynamic network and application conditions such as utilization, capacity, quality of service/application/user experience, etc. In order to achieve autognosis, networks need a means to: Continuously monitor/test the network for application-specific performance Analyze the monitoring/test data to detect problems (e.g., performance degradation) Diagnose, identify and localize sources of degradation Automatically take actions to resolve problems via remediation/provisioning Verify the problems have been resolved (potentially rolling back changes if ineffective) Subsequently, continue to monitor/test for performance

  Read more →
• 

  Sparse identification of non-linear dynamics

  Sparse identification of nonlinear dynamics (SINDy) is a data-driven algorithm for obtaining dynamical systems from data. Given a series of snapshots of a dynamical system and its corresponding time derivatives, SINDy performs a sparsity-promoting regression (such as LASSO and sparse Bayesian inference) on a library of nonlinear candidate functions of the snapshots against the derivatives to find the governing equations. This procedure relies on the assumption that most physical systems only have a few dominant terms which dictate the dynamics, given an appropriately selected coordinate system and quality training data. It has been applied to identify the dynamics of fluids, based on proper orthogonal decomposition, as well as other complex dynamical systems, such as biological networks. == Mathematical Overview == First, consider a dynamical system of the form x ˙ = d d t x ( t ) = f ( x ( t ) ) , {\displaystyle {\dot {\textbf {x}}}={\frac {d}{dt}}{\textbf {x}}(t)={\textbf {f}}({\textbf {x}}(t)),} where x ( t ) ∈ R n {\displaystyle {\textbf {x}}(t)\in \mathbb {R} ^{n}} is a state vector (snapshot) of the system at time t {\displaystyle t} and the function f ( x ( t ) ) {\displaystyle {\textbf {f}}({\textbf {x}}(t))} defines the equations of motion and constraints of the system. The time derivative may be either prescribed or numerically approximated from the snapshots. With x {\displaystyle {\textbf {x}}} and x ˙ {\displaystyle {\dot {\textbf {x}}}} sampled at m {\displaystyle m} equidistant points in time ( t 1 , t 2 , ⋯ , t m {\displaystyle t_{1},t_{2},\cdots ,t_{m}} ), these can be arranged into matrices of the form X = [ x T ( t 1 ) x T ( t 2 ) ⋮ x T ( t m ) ] = [ x 1 ( t 1 ) x 2 ( t 1 ) ⋯ x n ( t 1 ) x 1 ( t 2 ) x 2 ( t 2 ) ⋯ x n ( t 2 ) ⋮ ⋮ ⋱ ⋮ x 1 ( t m ) x 2 ( t m ) ⋯ x n ( t m ) ] , {\displaystyle {\bf {{X}={\begin{bmatrix}\mathbf {x} ^{\mathsf {T}}(t_{1})\\\mathbf {x} ^{\mathsf {T}}(t_{2})\\\vdots \\\mathbf {x} ^{\mathsf {T}}(t_{m})\end{bmatrix}}={\begin{bmatrix}x_{1}(t_{1})&x_{2}(t_{1})&\cdots &x_{n}(t_{1})\\x_{1}(t_{2})&x_{2}(t_{2})&\cdots &x_{n}(t_{2})\\\vdots &\vdots &\ddots &\vdots \\x_{1}(t_{m})&x_{2}(t_{m})&\cdots &x_{n}(t_{m})\end{bmatrix}},}}} and similarly for X ˙ {\displaystyle {\dot {\mathbf {X} }}} . Next, a library Θ ( X ) {\displaystyle \mathbf {\Theta } (\mathbf {X} )} of nonlinear candidate functions of the columns of X {\displaystyle {\textbf {X}}} is constructed, which may be constant, polynomial, or more exotic functions (like trigonometric and rational terms, and so on): Θ ( X ) = [ | | | | | | 1 X X 2 X 3 ⋯ sin ⁡ ( X ) cos ⁡ ( X ) ⋯ | | | | | | ] {\displaystyle \ \ \ {\bf {{\Theta }({\bf {{X})={\begin{bmatrix}\vline &\vline &\vline &\vline &&\vline &\vline &\\1&{\bf {X}}&{\bf {{X}^{2}}}&{\bf {{X}^{3}}}&\cdots &\sin({\bf {{X})}}&\cos({\bf {{X})}}&\cdots \\\vline &\vline &\vline &\vline &&\vline &\vline &\end{bmatrix}}}}}}} The number of possible model structures from this library is combinatorially high. f ( x ( t ) ) {\displaystyle {\textbf {f}}({\textbf {x}}(t))} is then substituted by Θ ( X ) {\displaystyle {\bf {{\Theta }({\textbf {X}})}}} and a vector of coefficients Ξ = [ ξ 1 ξ 2 ⋯ ξ n ] {\displaystyle {\bf {{\Xi }=\left[{\bf {{\xi }_{1}{\bf {{\xi }_{2}\cdots {\bf {{\xi }_{n}}}}}}}\right]}}} determining the active terms in f ( x ( t ) ) {\displaystyle {\textbf {f}}({\textbf {x}}(t))} : X ˙ = Θ ( X ) Ξ {\displaystyle {\dot {\bf {X}}}={\bf {{\Theta }({\bf {{X}){\bf {\Xi }}}}}}} Because only a few terms are expected to be active at each point in time, an assumption is made that f ( x ( t ) ) {\displaystyle {\textbf {f}}({\textbf {x}}(t))} admits a sparse representation in Θ ( X ) {\displaystyle {\bf {{\Theta }({\textbf {X}})}}} . This then becomes an optimization problem in finding a sparse Ξ {\displaystyle {\bf {\Xi }}} which optimally embeds X ˙ {\displaystyle {\dot {\textbf {X}}}} . In other words, a parsimonious model is obtained by performing least squares regression on the system (4) with sparsity-promoting ( L 1 {\displaystyle L_{1}} ) regularization ξ k = arg ⁡ min ξ k ′ | | X ˙ k − Θ ( X ) ξ k ′ | | 2 + λ | | ξ k ′ | | 1 , {\displaystyle {\bf {{\xi }_{k}={\underset {\bf {{\xi }'_{k}}}{\arg \min }}\left|\left|{\dot {\bf {X}}}_{k}-{\bf {{\Theta }({\bf {{X}){\bf {{\xi }'_{k}}}}}}}\right|\right|_{2}+\lambda \left|\left|{\bf {{\xi }'_{k}}}\right|\right|_{1},}}} where λ {\displaystyle \lambda } is a regularization parameter. Finally, the sparse set of ξ k {\displaystyle {\bf {{\xi }_{k}}}} can be used to reconstruct the dynamical system: x ˙ k = Θ ( x ) ξ k {\displaystyle {\dot {x}}_{k}={\bf {{\Theta }({\bf {{x}){\bf {{\xi }_{k}}}}}}}}

  Read more →
• 

  Regulation of algorithms

  Regulation of algorithms, or algorithmic regulation, is the creation of laws, rules and public sector policies for promotion and regulation of algorithms, particularly in artificial intelligence and machine learning. For the subset of AI algorithms, the term regulation of artificial intelligence is used. The regulatory and policy landscape for artificial intelligence (AI) is an emerging issue in jurisdictions globally, including in the European Union. Regulation of AI is considered necessary to both encourage AI and manage associated risks, but challenging. Another emerging topic is the regulation of blockchain algorithms (Use of the smart contracts must be regulated) and is mentioned along with regulation of AI algorithms. Many countries have enacted regulations of high frequency trades, which is shifting due to technological progress into the realm of AI algorithms. The motivation for regulation of algorithms is the apprehension of losing control over the algorithms, whose impact on human life increases. Multiple countries have already introduced regulations in case of automated credit score calculation—right to explanation is mandatory for those algorithms. For example, The IEEE has begun developing a new standard to explicitly address ethical issues and the values of potential future users. Bias, transparency, and ethics concerns have emerged with respect to the use of algorithms in diverse domains ranging from criminal justice to healthcare—many fear that artificial intelligence could replicate existing social inequalities along race, class, gender, and sexuality lines. == Regulation of artificial intelligence == === Public discussion === In 2016, Joy Buolamwini founded Algorithmic Justice League after a personal experience with biased facial detection software in order to raise awareness of the social implications of artificial intelligence through art and research. In 2017 Elon Musk advocated regulation of algorithms in the context of the existential risk from artificial general intelligence. According to NPR, the Tesla CEO was "clearly not thrilled" to be advocating for government scrutiny that could impact his own industry, but believed the risks of going completely without oversight are too high: "Normally the way regulations are set up is when a bunch of bad things happen, there's a public outcry, and after many years a regulatory agency is set up to regulate that industry. It takes forever. That, in the past, has been bad but not something which represented a fundamental risk to the existence of civilisation." In response, some politicians expressed skepticism about the wisdom of regulating a technology that is still in development. Responding both to Musk and to February 2017 proposals by European Union lawmakers to regulate AI and robotics, Intel CEO Brian Krzanich has argued that artificial intelligence is in its infancy and that it is too early to regulate the technology. Instead of trying to regulate the technology itself, some scholars suggest to rather develop common norms including requirements for the testing and transparency of algorithms, possibly in combination with some form of warranty. One suggestion has been for the development of a global governance board to regulate AI development. In 2020, the European Union published its draft strategy paper for promoting and regulating AI. Algorithmic tacit collusion is a legally dubious antitrust practise committed by means of algorithms, which the courts are not able to prosecute. This danger concerns scientists and regulators in EU, US and beyond. European Commissioner Margrethe Vestager mentioned an early example of algorithmic tacit collusion in her speech on "Algorithms and Collusion" on March 16, 2017, described as follows: "A few years ago, two companies were selling a textbook called The Making of a Fly. One of those sellers used an algorithm which essentially matched its rival’s price. That rival had an algorithm which always set a price 27% higher than the first. The result was that prices kept spiralling upwards, until finally someone noticed what was going on, and adjusted the price manually. By that time, the book was selling – or rather, not selling – for 23 million dollars a copy." In 2018, the Netherlands employed an algorithmic system SyRI (Systeem Risico Indicatie) to detect citizens perceived being high risk for committing welfare fraud, which quietly flagged thousands of people to investigators. This caused a public protest. The district court of Hague shut down SyRI referencing Article 8 of the European Convention on Human Rights (ECHR). In 2020, algorithms assigning exam grades to students in the UK sparked open protest under the banner "Fuck the algorithm." This protest was successful and the grades were taken back. In 2024, the Munich Convention on AI, Data and Human Rights was introduced as part of growing international efforts to regulate artificial intelligence through a human rights lens. Developed through a collaborative drafting process involving scholars from the Technical University of Munich, Stellenbosch University, Ulster University, and KNUST, the initiative calls for an international conversation on a binding treaty to safeguard human rights and the principles enshrined in the UN Charter in the age of AI. === Implementation === AI law and regulations can be divided into three main topics, namely governance of autonomous intelligence systems, responsibility and accountability for the systems, and privacy and safety issues. The development of public sector strategies for management and regulation of AI has been increasingly deemed necessary at the local, national, and international levels and in fields from public service management to law enforcement, the financial sector, robotics, the military, and international law. There are many concerns that there is not enough visibility and monitoring of AI in these sectors. In the United States financial sector, for example, there have been calls for the Consumer Financial Protection Bureau to more closely examine source code and algorithms when conducting audits of financial institutions' non-public data. In the United States, on January 7, 2019, following an Executive Order on 'Maintaining American Leadership in Artificial Intelligence', the White House's Office of Science and Technology Policy released a draft Guidance for Regulation of Artificial Intelligence Applications, which includes ten principles for United States agencies when deciding whether and how to regulate AI. In response, the National Institute of Standards and Technology has released a position paper, the National Security Commission on Artificial Intelligence has published an interim report, and the Defense Innovation Board has issued recommendations on the ethical use of AI. In April 2016, for the first time in more than two decades, the European Parliament adopted a set of comprehensive regulations for the collection, storage, and use of personal information, the General Data Protection Regulation (GDPR)1 (European Union, Parliament and Council 2016). The GDPR's policy on the right of citizens to receive an explanation for algorithmic decisions highlights the pressing importance of human interpretability in algorithm design. In 2016, China published a position paper questioning the adequacy of existing international law to address the eventuality of fully autonomous weapons, becoming the first permanent member of the U.N. Security Council to broach the issue, and leading to proposals for global regulation. In the United States, steering on regulating security-related AI is provided by the National Security Commission on Artificial Intelligence. In 2017, the U.K. Vehicle Technology and Aviation Bill imposes liability on the owner of an uninsured automated vehicle when driving itself and makes provisions for cases where the owner has made "unauthorized alterations" to the vehicle or failed to update its software. Further ethical issues arise when, e.g., a self-driving car swerves to avoid a pedestrian and causes a fatal accident. In 2021, the European Commission proposed the Artificial Intelligence Act. == Algorithm certification == There is a concept of algorithm certification emerging as a method of regulating algorithms. Algorithm certification involves auditing whether the algorithm used during the life cycle 1) conforms to the protocoled requirements (e.g., for correctness, completeness, consistency, and accuracy); 2) satisfies the standards, practices, and conventions; and 3) solves the right problem (e.g., correctly model physical laws), and satisfies the intended use and user needs in the operational environment. == Regulation of blockchain algorithms == Blockchain systems provide transparent and fixed records of transactions and hereby contradict the goal of the European GDPR, which is to give individuals full control of their private data. By implementing the Decree on Development of Digital Economy, Bel

  Read more →
• 

  Penril

  Penril DataComm Networks, Inc. was a computer telecommunications hardware company that made some acquisitions and was eventually split into two parts: one was acquired by Bay Networks and the other was a newly formed company named Access Beyond. The focus of both company's products was end-to-end data transfer. By the mid-1990s, with the popularization of the internet, this was no longer of wide interest. == History == Penril, whose earnings reports and other financials were followed by The New York Times in the 1990s, made several acquisitions but also grew internally. Following its Datability acquisition it renamed itself Penril Datability Networks. By the time the 1968-founded Penril was acquired by Bay their name was Penril DataComm Networks. The company, which as of 1985 "had made 14 acquisitions in 12 years," also had done extensive work regarding quality control, and leveraged their product line by what The Washington Post called clever packaging: "software, cables, instructions and telephone support" sold to those less technically skilled as "Network in a Box." == Datability == Datability Software Systems Inc. was the initial name of what by 1991 became 'Datability, Inc.', "a manufacturer of hardware that links computer networks." The 1977-founded firm began as a software consulting company, especially in the area of databases. To speed up project development they built a program generator, which they marketed as Control 10/20 (targeted at users of Digital Equipment Corporation's DECsystem-10 and DECSYSTEM-20). After trying their hand at time-sharing they built hardware to enhance bridging these computers to DEC's VAX product line. In particular they focused on Digital's LAT protocol, selling "boxes" that reimplemented the protocol, at a lower price than DEC's. They later expanded into other areas of telecommunications hardware The firm relocated to a larger manufacturing plant in 1991 and was acquired by Penril in 1993. == Access Beyond == Access Beyond was initially housed by Penril, from which it was spun off. A securities analyst noted that Access began operations with no debt. They subsequently merged with Hayes Corporation. Some of the funds brought to the merger came from a sale by Penril of two of its divisions, each bringing about $4 million. == Ron Howard == Ron Howard, founder of Datability, became part of Penril when the latter acquired the former, and was CEO of Access Beyond when it was spun off by Penril. Access merged with Hayes Microcomputer Products and was renamed Hayes Corp, at which time Howard became executive VP of business development and corporate vice chairman of Hayes. == People == In the matter of hiring immigrants, in an industry where recent arrivals came from a culture of six day work weeks, and subcontracting was then common, these assembly line workers at Penril comprised about 25%, compared to double in other firms. Placement was overseen by government agencies. == Controversy == Penril had a joint development agreement, beginning in 1990, with a Standard Microsystems Corporation (SMSC) subsidiary. A dispute arose, and the matter was brought to court. Penril was awarded $3.5 million in 1996.

  Read more →
• 

  Semantic folding

  Semantic folding theory describes a procedure for encoding the semantics of natural language text in a semantically grounded binary representation. This approach provides a framework for modelling how language data is processed by the neocortex. == Theory == Semantic folding theory draws inspiration from Douglas R. Hofstadter's Analogy as the Core of Cognition which suggests that the brain makes sense of the world by identifying and applying analogies. The theory hypothesises that semantic data must therefore be introduced to the neocortex in such a form as to allow the application of a similarity measure and offers, as a solution, the sparse binary vector employing a two-dimensional topographic semantic space as a distributional reference frame. The theory builds on the computational theory of the human cortex known as hierarchical temporal memory (HTM), and positions itself as a complementary theory for the representation of language semantics. A particular strength claimed by this approach is that the resulting binary representation enables complex semantic operations to be performed simply and efficiently at the most basic computational level. == Two-dimensional semantic space == Analogous to the structure of the neocortex, Semantic Folding theory posits the implementation of a semantic space as a two-dimensional grid. This grid is populated by context-vectors in such a way as to place similar context-vectors closer to each other, for instance, by using competitive learning principles. This vector space model is presented in the theory as an equivalence to the well known word space model described in the information retrieval literature. Given a semantic space (implemented as described above) a word-vector can be obtained for any given word Y by employing the following algorithm: For each position X in the semantic map (where X represents cartesian coordinates) if the word Y is contained in the context-vector at position X then add 1 to the corresponding position in the word-vector for Y else add 0 to the corresponding position in the word-vector for Y The result of this process will be a word-vector containing all the contexts in which the word Y appears and will therefore be representative of the semantics of that word in the semantic space. It can be seen that the resulting word-vector is also in a sparse distributed representation (SDR) format [Schütze, 1993] & [Sahlgreen, 2006]. Some properties of word-SDRs that are of particular interest with respect to computational semantics are: high noise resistance: As a result of similar contexts being placed closer together in the underlying map, word-SDRs are highly tolerant of false or shifted "bits". boolean logic: It is possible to manipulate word-SDRs in a meaningful way using boolean (OR, AND, exclusive-OR) and/or arithmetical (SUBtract) functions . sub-sampling: Word-SDRs can be sub-sampled to a high degree without any appreciable loss of semantic information. topological two-dimensional representation: The SDR representation maintains the topological distribution of the underlying map therefore words with similar meanings will have similar word-vectors. This suggests that a variety of measures can be applied to the calculation of semantic similarity, from a simple overlap of vector elements, to a range of distance measures such as: Euclidean distance, Hamming distance, Jaccard distance, cosine similarity, Levenshtein distance, Sørensen-Dice index, etc. == Semantic spaces == Semantic spaces in the natural language domain aim to create representations of natural language that are capable of capturing meaning. The original motivation for semantic spaces stems from two core challenges of natural language: Vocabulary mismatch (the fact that the same meaning can be expressed in many ways) and ambiguity of natural language (the fact that the same term can have several meanings). The application of semantic spaces in natural language processing (NLP) aims at overcoming limitations of rule-based or model-based approaches operating on the keyword level. The main drawback with these approaches is their brittleness, and the large manual effort required to create either rule-based NLP systems or training corpora for model learning. Rule-based and machine learning-based models are fixed on the keyword level and break down if the vocabulary differs from that defined in the rules or from the training material used for the statistical models. Research in semantic spaces dates back more than 20 years. In 1996, two papers were published that raised a lot of attention around the general idea of creating semantic spaces: latent semantic analysis from Microsoft and Hyperspace Analogue to Language from the University of California. However, their adoption was limited by the large computational effort required to construct and use those semantic spaces. A breakthrough with regard to the accuracy of modelling associative relations between words (e.g. "spider-web", "lighter-cigarette", as opposed to synonymous relations such as "whale-dolphin", "astronaut-driver") was achieved by explicit semantic analysis (ESA) in 2007. ESA was a novel (non-machine learning) based approach that represented words in the form of vectors with 100,000 dimensions (where each dimension represents an Article in Wikipedia). However practical applications of the approach are limited due to the large number of required dimensions in the vectors. More recently, advances in neural networking techniques in combination with other new approaches (tensors) led to a host of new recent developments: Word2vec from Google and GloVe from Stanford University. Semantic folding represents a novel, biologically inspired approach to semantic spaces where each word is represented as a sparse binary vector with 16,000 dimensions (a semantic fingerprint) in a 2D semantic map (the semantic universe). Sparse binary representation are advantageous in terms of computational efficiency, and allow for the storage of very large numbers of possible patterns. == Visualization == The topological distribution over a two-dimensional grid (outlined above) lends itself to a bitmap type visualization of the semantics of any word or text, where each active semantic feature can be displayed as e.g. a pixel. As can be seen in the images shown here, this representation allows for a direct visual comparison of the semantics of two (or more) linguistic items. Image 1 clearly demonstrates that the two disparate terms "dog" and "car" have, as expected, very obviously different semantics. Image 2 shows that only one of the meaning contexts of "jaguar", that of "Jaguar" the car, overlaps with the meaning of Porsche (indicating partial similarity). Other meaning contexts of "jaguar" e.g. "jaguar" the animal clearly have different non-overlapping contexts. The visualization of semantic similarity using Semantic Folding bears a strong resemblance to the fMRI images produced in a research study conducted by A.G. Huth et al., where it is claimed that words are grouped in the brain by meaning. voxels, little volume segments of the brain, were found to follow a pattern were semantic information is represented along the boundary of the visual cortex with visual and linguistic categories represented on posterior and anterior side respectively.

  Read more →
• 

  Enterprise architecture

  Enterprise architecture (EA) is a business function concerned with the structures and behaviours of a business, especially business roles and processes that create and use business data. The international definition according to the Federation of Enterprise Architecture Professional Organizations is "a well-defined practice for conducting enterprise analysis, design, planning, and implementation, using a comprehensive approach at all times, for the successful development and execution of strategy. Enterprise architecture applies architecture principles and practices to guide organizations through the business, information, process, and technology changes necessary to execute their strategies. These practices utilize the various aspects of an enterprise to identify, motivate, and achieve these changes." The United States Federal Government is an example of an organization that practices EA, in this case with its Capital Planning and Investment Control processes. Companies such as Independence Blue Cross, Intel, Volkswagen AG, and InterContinental Hotels Group also use EA to improve their business architectures as well as to improve business performance and productivity. Additionally, the Federal Enterprise Architecture's reference guide aids federal agencies in the development of their architectures. == Introduction == As a discipline, EA "proactively and holistically lead[s] enterprise responses to disruptive forces by identifying and analyzing the execution of change" towards organizational goals. EA gives business and IT leaders recommendations for policy adjustments and provides best strategies to support and enable business development and change within the information systems the business depends on. EA provides a guide for decision making towards these objectives. The National Computing Centre's EA best practice guidance states that an EA typically "takes the form of a comprehensive set of cohesive models that describe the structure and functions of an enterprise. The individual models in an EA are arranged in a logical manner that provides an ever-increasing level of detail about the enterprise." Important players within EA include enterprise architects and solutions architects. Enterprise architects are at the top level of the architect hierarchy, meaning they have more responsibilities than solutions architects. While solutions architects focus on their own relevant solutions, enterprise architects focus on solutions for and the impact on the whole organization. Enterprise architects oversee many solution architects and business functions. As practitioners of EA, enterprise architects support an organization's strategic vision by acting to align people, process, and technology decisions with actionable goals and objectives that result in quantifiable improvements toward achieving that vision. The practice of EA "analyzes areas of common activity within or between organizations, where information and other resources are exchanged to guide future states from an integrated viewpoint of strategy, business, and technology." === Definitions === The term enterprise can be defined as an organizational unit, organization, or collection of organizations that share a set of common goals and collaborate to provide specific products or services to customers. In that sense, the term enterprise covers various types of organizations, regardless of their size, ownership model, operational model, or geographical distribution. It includes those organizations' complete sociotechnical system, including people, information, processes, and technologies. Enterprise as a sociotechnical system defines the scope of EA. The term architecture refers to fundamental concepts or properties of a system in its environment; and embodied in its elements, relationships, and in the principles of its design and evolution. A methodology for developing and using architecture to guide the transformation of a business from a baseline state to a target state, sometimes through several transition states, is usually known as an enterprise architecture framework. A framework provides a structured collection of processes, techniques, artifact descriptions, reference models, and guidance for the production and use of an enterprise-specific architecture description. Open-source tools supporting EA practice, such as the Essential Project, have also been evaluated for suitability in academic and commercial training contexts. Paramount to changing the EA is the identification of a sponsor. Their mission, vision, strategy, and the governance framework define all roles, responsibilities, and relationships involved in the anticipated transformation. Changes considered by enterprise architects typically include innovations in the structure or processes of an organization; innovations in the use of information systems or technologies; the integration and/or standardization of business processes; and improvement of the quality and timeliness of business information. According to the standard ISO/IEC/IEEE 42010, the product used to describe the architecture of a system is called an architectural description. In practice, an architectural description contains a variety of lists, tables, and diagrams. These are models known as views. In the case of EA, these models describe the logical business functions or capabilities, business processes, human roles and actors, the physical organization structure, data flows and data stores, business applications and platform applications, hardware, and communications infrastructure. The first use of the term "enterprise architecture" is often incorrectly attributed to John Zachman's 1987 A framework for information systems architecture. The first publication to use it was instead a National Institute of Standards (NIST) Special Publication on the challenges of information system integration. The NIST article describes EA as consisting of several levels. Business unit architecture is the top level and might be a total corporate entity or a sub-unit. It establishes for the whole organization necessary frameworks for "satisfying both internal information needs" as well as the needs of external entities, which include cooperating organizations, customers, and federal agencies. The lower levels of the EA that provide information to higher levels are more attentive to detail on behalf of their superiors. In addition to this structure, business unit architecture establishes standards, policies, and procedures that either enhance or stymie the organization's mission. The main difference between these two definitions is that Zachman's concept was the creation of individual information systems optimized for business, while NIST's described the management of all information systems within a business unit. The definitions in both publications, however, agreed that due to the "increasing size and complexity of the [i]mplementations of [i]nformation systems... logical construct[s] (or architecture) for defining and controlling the interfaces and... [i]ntegration of all the components of a system" is necessary. Zachman in particular urged for a "strategic planning methodology." == Overview == === Schools of thought === Within the field of enterprise architecture, there are three overarching schools: Enterprise IT Design, Enterprise Integrating, and Enterprise Ecosystem Adaption. Which school one subscribes to will impact how they see the EA's purpose and scope, as well as the means of achieving it, the skills needed to conduct it, and the locus of responsibility for conducting it. Under Enterprise IT Design, the main purpose of EA is to guide the process of planning and designing an enterprise's IT/IS capabilities to meet the desired organizational objectives, often by greater alignment between IT/IS and business concerns. Architecture proposals and decisions are limited to the IT/IS aspects of the enterprise and other aspects service only as inputs. The Enterprise Integrating school believes that the purpose of EA is to create a greater coherency between the various concerns of an enterprise (HR, IT, Operations, etc.), including the link between strategy formulation and execution. Architecture proposals and decisions here encompass all aspects of the enterprise. The Enterprise Ecosystem Adaption school states that the purpose of EA is to foster and maintain the learning capabilities of enterprises so they may be sustainable. Consequently, a great deal of emphasis is put on improving the capabilities of the enterprise to improve itself, to innovate, and to coevolve with its environment. Typically, proposals and decisions encompass both the enterprise and its environment. === Benefits, challenges, and criticisms === The benefits of EA are achieved through its direct and indirect contributions to organizational goals. Notable benefits include support in the areas related to design and re-design of the organizational structures during mergers, acquisitions, or

  Read more →
• 

  SciDB

  SciDB is a column-oriented database management system (DBMS) designed for multidimensional data management and analytics common to scientific, geospatial, financial, and industrial applications. It is developed by Paradigm4 and co-created by Michael Stonebraker. == History == Stonebraker claims that arrays are 100 times faster in SciDB than in a relational DBMS on a class of problems. It is swapping rows and columns for mathematical arrays that put fewer restrictions on the data and can work in any number of dimensions unlike the conventionally widely used relational database management system model, in which each relation supports only one dimension of records. A 2011 conference presentation on SciDB promoted it as "not Hadoop". Marilyn Matz became chief executive Paradigm4 in 2014.

  Read more →