AI Grammar Remover

AI Grammar Remover — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Direct voice input

Direct voice input (DVI), sometimes called voice input control (VIC), is a style of human–machine interaction "HMI" in which the user makes voice commands to issue instructions to the machine through speech recognition. In the field of military aviation, DVI has been introduced into the cockpits of several modern military aircraft, such as the Eurofighter Typhoon, the Lockheed Martin F-35 Lightning II, the Dassault Rafale, the KF-21 Boramae and the Saab JAS 39 Gripen. Such systems have also been used for various other purposes, including industry control systems and speech recognition assistance for impaired individuals. == Overview == DVI systems can be divided into two major categories of functionality: "user-dependent" or "user-independent". A user-dependent system requires that a personal voice template to be generated for a specific person; the template for this individual has to be loaded onto their assigned machine prior to use of the DVI system for it to function properly. In contrast, a user-independent system does not require any personal voice template, being intended to respond correctly to the voice of any user. They can also be categorised between "discrete recognition" and "continuous recognition". Users of a discrete recognition system must pause between each word so that the DVI system can identify the separations between each word, while a continuous speech recognition system is capable of understanding a normal rate of speech. During the mid-2000s, researchers at the National Aerospace Laboratory in the Netherlands examined the use of DVI in the "GRACE" simulator; a total of twelve pilots participated in the ensuing experiment. The tests performed reportedly revealed that, while the hardware itself functioned well, several improvements were desirable prior to real-world deployment on aircraft since DVI operations actually consumed more time in comparison to traditional existing methods. Recommendations for improvements included the adoption of simpler syntax, the achievement of a greater recognition rate, and a decrease in response times; all of the issues encountered were determined to be of a technological nature, and were deemed feasible to resolve. The researchers concluded that in cockpits, especially during emergencies where pilots have to operate entirely on their own, a DVI system could be highly relevant, but that it was not of crucial importance during most other conceivable scenarios. Around the same time, evaluations of DVI systems for civil aviation purposes were conducted within the framework of Project SafeSound, coordinated by the European Union. It involved the observation of pilot workloads in real-world cockpits and contrasting them against pilot activity in flight simulators using both conventional systems and DVI assistance. The project aimed to enhance aviation safety and to decrease the workload in both ground and flight operations via the application of enhanced audio functions. == Applications == === Aviation === Prior to its widespread deployment, a handful of conventional military aircraft were converted to trial DVI systems; examples include the Harrier AV-8B and F-16 VISTA. In another case, a General Dynamics F-16 Fighting Falcon simulator was modified with DVI for a voice control study that was undertaken by the Royal Netherlands Air Force. DVI trials have also been conducted on helicopters, including the Boeing AH-64 Apache, showing the potential to improve flight safety and mission effectiveness. Numerous modern fighter aircraft have been outfitted with DVI systems, often in combination with various other man-machine interface schemes, such as HOTAS-compliant controls and other advanced control technologies. The combination of Voice and HOTAS control schemes has sometimes been referred to as the "V-TAS" concept. A prominent fighter aircraft to be furnished with a V-TAS cockpit is the Eurofighter Typhoon. The Lockheed Martin F-35 Lightning II also features a DVI system, which was developed by Adacel. Other examples includes the Dassault Rafale and the Saab JAS 39 Gripen. Numerous aircraft have been planned to use DVI. At one stage, the United States Air Force had sought to integrate DVI upon the Lockheed Martin F-22 Raptor; however, the technology was eventually judged to pose too many technical risks at that point in time, and thus such efforts were abandoned. === Personal === By 1990, working prototypes of speech recognition systems were being demonstrated; these were being promoted for the purpose of providing an effective man-machine interface for individuals with impaired speech. Techniques employed included time-encoded digital speech and automatic token set selection. Investigations of these early DVI systems reportedly included the use of automatic diagnostic routines and limited-scale trials using volunteers. During the 2010s, various companies were offering voice recognition systems to the general public in the form of personal digital assistants. One example is the Google Voice service, which allows users to pose questions via a DVI package installed on either a personal computer, tablet, or mobile phone. Numerous digital assistants have been developed, such as Amazon Echo, Siri, and Cortana, that use DVI to interact with users. === Commercial === DVI technology has enabled automated telephone systems to be widely deployed. Many companies commonly use centralised phone systems that route callers to the correct department via such methods. Various car manufacturers have also furnished their road vehicles with DVI systems; these typically allow drivers to control infotainment systems and interact with mobile phones with more convenience than legacy methods. During the late 1980s, investigations into the use of DVI systems for controlling CNC machines and other manufacturing apparatus were underway. During the 2010s, such systems were being used for logistics and warehouse management purposes.
Read more →
Diia

Diia (Ukrainian: Дія [ˈd⁽ʲ⁾ijɐ] , lit. 'Action'; also an acronym for Держава і Я, Derzhava i Ya, IPA: [derˈʒɑwɐ i ˈjɑ], lit. 'State and Me') is a mobile app, a web portal and a brand of e-governance in Ukraine. Launched in 2020, the Diia app allows Ukrainian citizens to use digital documents on their smartphones instead of physical ones for identification and sharing purposes. The Diia portal allows access to over 130 government services. Eventually, the government plans to make all kinds of state-person interactions available through Diia. Diia was built in partnership with the United States and is poised to be shared with other countries. On the sidelines of the 2023 World Economic Forum in Davos, USAID Administrator Samantha Power said the US hopes to replicate the success of Diia in other countries. == History == Diia was first presented on September 27, 2019, by the Ministry of Digital Transformation of Ukraine as a brand of the State in a Smartphone project. Vice Prime Minister and Minister of Digital Transformation Mykhailo Fedorov announced the creation of a mobile app and a web portal that would unite in a single place all the services provided by the state to citizens and businesses. On February 6, 2020, the mobile app Diia was officially launched. During the presentation, Ukrainian President Volodymyr Zelensky said that 9 million Ukrainians now have access to their driver's license and car registration documents on their phones, while Prime Minister Oleksiy Honcharuk called the implementation of the State in a Smartphone project a priority for the government. In April 2020, the Ukrainian government approved a resolution for experimental usage of digital ID-cards and passports which would be issued to all Ukrainians via the Diia. On October 5, 2020, during the Diia Summit, the government presented a first major update of the app and web portal branded "Diia 2.0". More types of documents were added to the app as well as the ability to share documents with others via a single tap on a push-message. The web portal in turn expanded the number of available services to 27, including the ability to register a private limited company in half an hour. President Zelensky who opened the summit, announced that in 2021 Ukraine will enter the "paper less" mode by prohibiting civil servants from demanding paper documents. By the end of 2020, the app had more than six million users, while the portal had 50 available services. In March 2021, the Ukrainian parliament adopted a bill equating digital identity documents with their physical analogues. Starting on August 23, Ukrainian citizens can use digital ID-cards and passports for all purposes while in Ukraine. According to Minister of Digital Transformation Mykhailo Fedorov, Ukraine will become the first country in the world where digital identity documents are considered legally equivalent to ordinary ones. In September 2024, Diia launched an online marriage registration service, which can be beneficial especially for military personnel who spend much time on the frontline separated from their partners. In October 2024, Diia's online marriage service appeared in Time's Inventions of the 2024 list. In the first month of its operations over 1.1 million Ukrainians tried to make proposals using the technology, and 435 couples got married. == Benefits and challenges == The first and most obvious benefit is the convenience of such a platform. Citizens can have many documents on their smartphones at once, without concern about losing or damaging them. Whenever needed, they can just open an app on their smartphones and show/check the document they need. The idea is that Diia will help cut the bureaucracy associated with public services, which in turn will help fight corruption and increase government savings. Fewer people are needed to be employed in the public sector and fewer human to human interactions are supposed to happen. With the start of the program, already 10% of government employees were reduced, which contributes to hundreds of millions of dollars in savings, but besides this, the initiative also improves the speed, efficiency, and transparency of government services. In addition, the digitalization of the government sector helps to develop the whole IT industry in the country, people become more digitally aware and educated, this affects other sectors as well, increasing the spread of digital infrastructure and expediting the speed of overall digitalization. The UN E-government Development Index, which assesses the capabilities of governments to integrate its functions electronically, such as the use of internet and mobile devices, ranked Ukraine 69th in 193 countries surveyed in 2020. Despite its low ranking in the e-government development index, Ukraine made a big jump on the e-participation index, which they ranked 43rd out of 193 countries from 0.66 in 2018 to 0.81 in 2020 (un.org, 2020), suggesting that the government and its citizens are adapting the IT-based government functions. The main goal of e-government according to Perez-Morote et.al. (2020) is to have accountability and transparency among the countries involved. But to do so, there are several challenges that a country should assess first prior to implementing e-government. In the research written by Heeks (2001), the author identified 2 main challenges that countries face in the development of e-government, first is the strategic challenge which involves the preparedness (e-readiness) of the entire government system for electronic transformation, and second challenge is the tactical challenge where the government must design (e-governance design) a system where it can be understood by every user, it's important that the information that needs to be communicated to the consumers is received clearly. For the first challenge (e-readiness), Ukraine had an internet penetration rate of 76% in 2020 and is expected to grow to 82%, it is important that consumers have the internet access for it to enable the consumers to utilize the service. Another factor is the readiness of its institutional infrastructure, which means that the government has its own organization which is solely focused on implementing the e-government project. In the case of Ukraine, the e-governance team is led by Oleksandr Ryzhenko, and the country's e-governance initiative is even further strengthened by ensuring that the data and legal infrastructure are already prepared. Ukraine has done this by modernizing their legislation that is more appropriate in the digital service, and the data exchange solution used by Ukraine is called Trembita. The human infrastructure is also being updated, as competent individuals must be the one doing the task, hence, EGOV4UKRAINE was launched, this aims to get IT developers for developing a system for administrative services. These efforts by the Ukrainian government did not go unnoticed, and they received an award from the e-Governance Academy as "partner of the year 2017". For the second challenge, which deals with the system design, the success of Ukraine can be seen on the latest data of UNDP, where it shows a high increase in the E-participation index. In 2018, Ukraine ranked 75th it ranked 46th in 2020 (un.org, 2020). Despite visible success, the implementation of the e-government was accompanied by problems. Data leakage became the main one. In May 2020, the data of 26 million driver's licenses appeared in the public domain on the Internet. The Ukrainian government said the Diia app was not linked to a data breach, but it is impossible to say for certain. Any storage of official documents in electronic format is associated with the risk of their leakage. In addition, the Diia application still has data protection issues, as the required protection system has not been implemented. This is also compounded by the country's weak data protection legal regime. In addition, since 2023, Ukrainians are able to register their cars with this app. Issued license plates are not using regional codes, but they are using special codes starting with DI or PD. == Diia City == In May 2020, the government presented Diia City headed by Oleksandr Borniakov, a large-scale project which would establish a virtual model of a free economic zone for representatives of the creative economy. It would provide for special digital residency with a particular taxation regime, intellectual property protection and simplified regulations. Diia City concurrently imposes certain constraints on contracts involving individual entrepreneurs (FOPs). It also offers the benefit of tax rebates. Diia City garners endorsement from the Ukrainian government, believing it will support the country's position in the IT market. As of July 30, 2023, the program had more than 600 residents, including companies like iGama, Avenga, SBRobotiks, and Intellectsoft.
Read more →
Faceu

FaceU (Chinese: 激萌) is a camera app for smartphones running Android or Apple iOS that edits portrait photographs, typically selfies. This app uses AR technology to allow users to add stickers or effects in real-time when taking selfies and videos. It was launched in 2016 and had 250 million registered users in 2017. Most of the users of Faceu are females from 15 to 35 years old. In February 2018, Faceu was acquired by Chinese media startup Toutiao, which is worth about $300 million. The app was banned in India (along with other Chinese apps) on 2 September 2020 by the government, the move came amid the 2020 China-India skirmish. == Online marketing == FaceU is one of several selfie camera apps in China, including MeituPic, Pitu, and Camera360. The app includes social functions such as instant messaging and video chat. Photos and short videos are deleted after a short period. . FaceU has worked with brands to create themed stickers for social media campaigns. In 2016, Faceu collaborated with MeituPic's Meipai and launched a rainbow effect. In October 2017, during the Mid-Autumn Festival and National Day, FaceU released a feature that applied historical or military costumes to selfies. The app has also worked with various social media personalities and celebrities, who have posted content using FaceU effects. Faceu group engages users' emotions utilizing key opinion leaders (KOL) and posters on social media. == Usage and Demographics == FaceU had a large user base. According to industry sources, the app had more than 90 million monthly active users (MAU) and over 11 million daily active users (DAU) at certain points. Most of the users were under 30 and mainly women. The app was especially popular in major Chinese cities like Beijing, Shanghai, and Guangzhou. FaceU also caught on in other parts of East Asia, particularly Japan and South Korea. Some app stores claim the app had hundreds of millions of users worldwide, but these numbers mostly come from the company’s marketing materials and have not been confirmed by independent sources. == Product Features == FaceU includes face recognition and live augmented reality (AR) effects. It allows users to add filters and stickers in real time while they are recording, rather than having to apply them later. The app integrates beauty filters, tools to create emojis and GIFs, and follow-video functionality that automatically tracks the face and movements as it records. Studies and market reports indicate that augmented reality (AR) filters and beautification tools are now common in smartphone photography. These features have influenced the way people take photos and what they expect photos to look like when shared online. Adding AR filters and beautification options has become a standard feature that most mobile photography apps now include.
Read more →
Dabbler

Dabbler is natural media drawing software for beginners. It was initially developed by Fractal Design Corporation. It is a simplified version of Fractal Design Painter, and included multimedia tutorials and a fullscreen interface. Dabbler was released as "Art Dabbler" after the MetaCreations merger, and rights were eventually transferred to Corel. Dabbler operating systems are Mac OS and Microsoft Windows.
Read more →
Nolot

Nolot is a chess test suite with 11 positions from real games. They were compiled by Pierre Nolot (French: [nɔ.lo]) for the French chess magazine Gambisco and posted on the rec.games.chess Usenet group in 1994. They were designed to be particularly hard to solve for chess engines to solve at the time, although modern engines can find a solution near-instantaneously. == Problem 1 == FEN: r3qb1k/1b4p1/p2pr2p/3n4/Pnp1N1N1/6RP/1B3PP1/1B1QR1K1 w - - 0 1 26.Nxh6!! c3 (26... Rxh6 27.Nxd6 Qh5 (best) 28.Rg5! Qxd1 29.Nf7+ Kg8 30.Nxh6+ Kh8 31.Rxd1 c3 32.Nf7+ Kg8 33.Bg6! Nf4 34.Bxc3 Nxg6 35.Bxb4 Kxf7 36.Rd7+ Kf6 37.Rxg6+ Kxg6 38.Rxb7 ±) 27.Nf5! cxb2 28.Qg4 Bc8 (28... g6!? 29.Kh2! 29.Qd7 30.Nh4 Bc6 31.Nc5! dxc 32.Rxe6 Nf6 33.Nxg6+ Kg7 34.Qg5 Nbd5 35.Ne5 Kh8 36.Nxd7 ±) 29.Qh4+ Rh6 30.Nxh6 gxh6 31.Kh2! Qe5 32.Ng5 Qf6 33.Re8 Bf5 34.Qxh6 (missing a mate in 6: 34.Nf7+ Qxf7 35.Qxh6+ Bh7 36.Rxa8 Nf6 37.Rxf8 Qxf8 38.Qxf8+ Ng8 39.Qg7#) 34...Qxh6 35.Nf7+ Kh7 36.Bxf5+ Qg6 37.Bxg6+ Kg7 38.Rxa8 Be7 39.Rb8 a5 40.Be4+ Kxf7 41.Bxd5+ 1–0 The best Novag computer, the Diablo 68000, finds 26. Nxh6 after seven and a half months (Pierre Nolot has let it run on the position for 14 months and one day, until a power failure stopped an analysis of over 80,000,000,000 nodes.) but for wrong reasons: it evaluates white's position as inferior and thinks this move would enable it to draw. Today Gambit Tiger 2.0 for example can find it quite quickly: Most free engines running on 64-bit processors in 2010 could solve this problem and the others in a few seconds. 1.Qd4 c3 2.Bxc3 Nxc3 3.Qxb4 Nxe4 4.Qxb7 Rb8 5.Qxb8 Qxb8 6.Bxe4 d5 7.Rb1 μ (-1.20) Depth: 12 00:00:09 6055 kN 1.Nxh6 c3 2.Nf5 cxb2 3.Qg4 Rb8 4.Nxg7 Rg6 5.Qxg6 Qxg6 6.Rxg6 Bxg7 7.Nxd6 ³ (-0.48) Depth: 12 00:00:21 14368 kN 1.Nxh6 c3 2.Nf5 cxb2 3.Qg4 Rc8 4.Nxg7 Rg6 5.Nxe8 Rxg4 6.Rxg4 Rxe8 7.Rg6 μ (-0.74) Depth: 13 00:00:55 38455 kN 1.Ne3 Rxe4 2.Bxe4 Qxe4 3.Nxd5 Qxd5 4.Qc1 Qf5 5.Qxh6+ Qh7 6.Qe6 Nd3 7.Re2 Nxb2 8.Rxb2 ³ (-0.58) Depth: 13 00:01:30 62979 kN 1.Ne3 Rxe4 ³ (-0.58) Depth: 14 00:02:02 84941 kN 1.Ne3 Nxe3 2.Rexe3 Bxe4 3.Qg4 Rg6 4.Qxe4 Qxe4 5.Bxe4 Rxg3 6.Rxg3 d5 7.Bf5 Re8 8.Bc3 ³ (-0.30) Depth: 15 00:03:05 128968 kN 1.Nxh6 ² (0.32) Depth: 15 00:07:58 350813 kN With the next ply showing a clear advantage. Stockfish 14dev 64bit 4CPU running on 2020 hardware recognises the significance of Nxh6!! in 1 second. Stockfish_21092606_x64_avx2: NNUE evaluation using nn-13406b1dcbe0.nnue enabled. 19/32 00:01 7708k 4882k +3,00 Nxh6 Rxh6 Nxd6 Qh5 Bg6 Qxd1 Nf7+ Kg8 Nxh6+ gxh6 Bh5+ Kh7 Rxd1 c3 Bxc3 Nxc3 Rd7+ Kh8 Rxb7 Ne4 Re3 Nxf2 Kxf2 Bc5 Ke2 Bxe3 Kxe3 Nd5+ Kf2 49/73 15:02 5118270k 5673k +6,15 Nxh6 Rxh6 Nxd6 Qh5 Rg5 Qxd1 Nf7+ Kg8 Nxh6+ Kh8 Rxd1 c3 Nf7+ Kg8 Bg6 Nf4 Bxc3 Nbd5 Rb1 Bc6 Bd2 Nxg6 Rxg6 Ne7 Rxc6 Nxc6 Rb6 Rc8 Ng5 a5 Ra6 Bb4 Be3 Ne5 Bd4 Nc6 Bb6 Bd2 h4 Kf8 Bc5+ Kg8 Be3 Bxe3 fxe3 Kf8 Kf2 Ke7 Nf3 Kd7 Rb6 Ne7 Rb5 Kd6 Rxa5 Rc2+ Kg3 Re2 Nd4 Rxe3+ Kf4 Rd3 Nf5+ Kc7 Nxe7 == Problem 2 == FEN: r4rk1/pp1n1p1p/1nqP2p1/2b1P1B1/4NQ2/1B3P2/PP2K2P/2R5 w - - 0 1 22.Rxc5!! Nxc5 23.Nf6+ Kh8 24.Qh4 Qb5+ (computers think there is perpetual check here, but...) 25.Ke3! 25... h5 26.Nxh5 Qxb3+ (26... d5+ 27.Bxd5 Qd3 28.Kf2 Ne4+ 29.Bxe4 Qd4+ 30.Kg2 Qxb2+ 31.Kh3 ±) and White won in 41 moves. Today Deep Junior 8.ZX for example finds it very quickly (around 1 minute): 1.Kd1 Rac8 2.Bh6 Qb5 3.Rc3 Qf1+ 4.Kc2 Rc6 5.Bxf8 −+ (-2.11) Depth: 12 00:00:04 10422 kN 1.Nxc5 Nxc5 2.Rxc5 Qxc5 3.e6 Rae8 4.e7 Nc8 5.Kf1 Nxd6 6.Bf6 b5 −+ (-2.10) Depth: 12 00:00:14 25054 kN 1.Bf6! μ (-1.35) Depth: 12 00:00:17 34601 kN 1.Bf6 Qb5+ 2.Ke1 Bb4+ 3.Kf2 Bc5+ = (0.00) Depth: 12 00:00:20 34601 kN 1.Bf6 Qb5+ 2.Ke1 Nxf6 3.Nxf6+ Kg7 4.Nh5+ gxh5 5.Qf6+ Kg8 6.Qg5+ Kh8 7.Qf6+ = (0.00) Depth: 15 00:01:01 130544 kN 1.Rxc5! = (0.15) Depth: 15 00:01:12 145875 kN 1.Rxc5 Nxc5 2.Nf6+ Kh8 3.Qh4 Qb5+ 4.Ke3 h5 5.Nxh5 Qd3+ 6.Kf2 Ne4+ 7.fxe4 Qd4+ 8.Kf1 Qd3+ 9.Ke1 Qb1+ 10.Bd1 ± (2.18) Depth: 15 00:01:18 145875 kN Stockfish 14dev 64bit 4CPU running on 2020 hardware recognises the significance of Rxc5!! in 1 second. Stockfish_21092606_x64_avx2: NNUE evaluation using nn-13406b1dcbe0.nnue enabled. 21/25 00:01 5822k 5545k +6,61 Rxc5 Qxc5 Nxc5 Nxc5 Bh6 Nbd7 Bxf8 Rxf8 Qe3 Rc8 f4 Nxe5 Qxe5 Ne6 Bxe6 Rc2+ Kd3 Rxh2 46/86 11:27 5057055k 7355k +7,61 Rxc5 Qxc5 Nxc5 Nxc5 Bf6 Ne6 Qh6 Nd4+ Kf2 Nf5 Qg5 Nd7 h4 Nxf6 Qxf6 Ng7 d7 b5 Bd5 Rab8 b4 Nh5 Bxf7+ Rxf7 d8R+ Rxd8 Qxd8+ Rf8 Qd5+ Kg7 e6 Kf6 Qd7 Ng7 Qd4+ Kxe6 Qxg7 Rf7 Qc3 Ke7 Qc5+ Ke8 Qc8+ Ke7 h5 gxh5 Kg3 h4+ Kh2 h6 Qc5+ Kf6 Qxb5 Kg7 f4 Rxf4 Qe5+ Rf6 b5 h3 Qd4 Kg8 Qxf6 h5 Blacks 22. .. Nxc5 is suboptimal and leads faster mate 77/44 09:18 6987714k 12518k +M22 Nf6+ Kh8 Qh4 Qb5+ Ke3 Qxb3+ axb3 h5 Nxh5 Nd5+ Kd4 Ne6+ Kxd5 Nxg5 Qxg5 gxh5 f4 Rad8 f5 f6 Qxh5+ Kg7 Qg6+ Kh8 e6 b6 e7 Rb8 exf8Q+ Rxf8 Ke6 b5 Ke7 Rb8 Qh5+ Kg7 Qf7+ Kh8 Kxf6 Rf8 Qxf8+ Kh7 Qg7+ == Problem 3 == FEN: r2qk2r/ppp1b1pp/2n1p3/3pP1n1/3P2b1/2PB1NN1/PP4PP/R1BQK2R w KQkq - 0 1 12.Nxg5!! Bxd1 13.Nxe6 Qb8 14.Nxg7+!! Kf8 15.Bh6! Bg4 16.0-0+ Kg8 17.Rf4 ± White wins with a queen sac but black has defensive resources. Stockfish 8 64bit 3CPU running on 2016 hardware recognizes the significance of Nxg5!! in 55 seconds. Stockfish 14 dev (Stockfish_21092606_x64_avx2) 64bit 4CPU running on 2020 hardware recognizes the significance of Nxg5!! in 1 second. NNUE evaluation using nn-13406b1dcbe0.nnue enabled. 21/34 00:01 8291k 4530k +2,78 Nxg5 Bxd1 Nxe6 Qb8 Nxg7+ Kd8 Kxd1 b5 N3f5 Bf8 Rf1 Kc8 Nh5 Kb7 Bxb5 Ne7 g4 a6 Ba4 Nxf5 gxf5 Ka7 Nf4 c5 47/59 37:49 10390430k 4578k +3,16 Nxg5 Bxd1 Nxe6 Qb8 Nxg7+ Kd8 Kxd1 b5 Rf1 Kc8 N3f5 Bf8 Ne6 Kd7 Nf4 Ne7 g4 a5 Ke2 Qb7 h4 Ra6 a3 Kc8 Be3 Kb8 Kf3 Rb6 Bd2 Qc8 Kg3 c5 Be3 c4 Nxe7 Bxe7 Bf5 Qd8 h5 Qg8 Kh3 Bg5 Rf3 Ra6 Raf1 b4 Nxd5 Qxd5 Bxg5 bxc3 bxc3 Rb6 Be3 Rb3 Blacks 14 .. Kf8 is suboptimal and leads loss fast 41/68 06:31 3269727k 8350k +9,28 Bh6 Kg8 Rxd1 Bf8 N3h5 Bxg7 Nxg7 Qf8 Nf5 Ne7 Bxf8 Nxf5 Bxf5 Rxf8 Be6+ Kg7 Rd3 Rf4 Bxd5 c6 Rg3+ Kf8 Rf3 Rxf3 Bxf3 Kg7 Rf1 Re8 Be4 Re6 Ke2 a5 Ke3 Rh6 h3 a4 Kf4 Re6 h4 Re8 Ke3 h6 h5 Rf8 Rxf8 Kxf8 == Problem 4 == FEN: r1b1kb1r/1p1n1ppp/p2ppn2/6BB/2qNP3/2N5/PPP2PPP/R2Q1RK1 w kq - 0 1 10.Nxe6!! Qxe6 11.Nd5 Kd8 12.Bg4 Qe5 13.f4 Qxe4 (13...Qxb2 stronger but not sufficient: 14.Bxd7 Bxd7 15.Rb1 Qa3 16.Nxf6 Bb5 17.Qd4 Qc5 18.Rfd1 ±) 14.Bxd7 Bxd7 15.Nxf6 gxf6 16.Bxf6+ Kc7 17.Bxh8 and Black resigned on move 27. Stockfish 14dev 64bit 4CPU running on 2020 hardware recognises the significance of 10.Nxe6 in 1 second. Stockfish_21092606_x64_avx2: NNUE evaluation using nn-13406b1dcbe0.nnue enabled. 22/37 00:01 6955k 5367k +4,00 Nxe6 Qxe6 Nd5 Kd8 Bg4 Qe5 f4 Qxb2 Rb1 Qa3 Bxd7 Bxd7 Nxf6 Bb5 Rf3 Qxa2 c4 Bxc4 Rf2 Qa5 Nd5+ f6 Nxf6 Kc7 Rc1 b5 Qd5 gxf6 Bxf6 Kb8 Rxc4 Qe1+ Rf1 51/70 47:10 14538911k 5137k +5,76 Nxe6 Qxe6 Nd5 Kd8 Bg4 Qe5 f4 Qxe4 Bxd7 Bxd7 Nxf6 Qf5 Qd4 Kc8 Nd5 Bc6 c4 f6 Nb6+ Kb8 Bh4 Be7 Rae1 Bd8 Nxa8 Kxa8 Bf2 Kb8 Qxd6+ Bc7 Ba7+ Kc8 Qe6+ Qxe6 Rxe6 h5 h4 Rd8 Re7 g6 Be3 Ba5 Kf2 Rd6 Rc1 Bd8 Rg7 Be4 Rg8 Kd7 c5 Rd3 Rc4 Bd5 Rg7+ Ke6 Rd4 Rxd4 Bxd4 Kf5 Rd7 Bc6 Rxd8 Kxf4 Bxf6 == Problem 5 == FEN: r2qrb1k/1p1b2p1/p2ppn1p/8/3NP3/1BN5/PPP3QP/1K3RR1 w - - 0 1 21.e5!! dxe5 22.Ne4! Nh5 23.Qg6!? (stronger is 23.Qg4!! Nf4 24.Nf3 Qc7 25.Nh4 ± ) 23...exd4? (23...Nf4 24.Rxf4! exf4 25.Nf3! Qb6 26.Rg5!! covering b5 and threatening Nf6 or Ne5-f7+) 24.Ng5 1−0 Stockfish 8 64bit 3CPU running on 2016 hardware recognises the significance of 21.e5 in 5 seconds. Stockfish 12 dev (Stockfish_20062212_x64_modern) 64bit 1CPU running on 2016 hardware recognizes the significance of 21.e5 in 11 seconds. 25/42 00:06 7 963k 1309k +6,93 e5 Nh5 Ne4 dxe5 Nf3 Nf4 Qg4 Qc7 Nh4 Bc6 Nf6 g5 Rxf4 exf4 Qh5 Qe7 Ng6+ Kg7 Nxe7 Rxe7 Ng4 37/62 03:12 298 083k 1545k +10,70 e5 Ng4 Qxg4 Qg5 Qh3 Qxe5 Nde2 g5 Rxf8+ Kg7 Rff1 Rf8 Re1 Qf5 Qg3 Rad8 Nd4 Qf4 Nxe6+ Bxe6 Rxe6 Qxg3 == Problem 6 == FEN: rnbqk2r/1p3ppp/p7/1NpPp3/QPP1P1n1/P4N2/4KbPP/R1B2B1R b kq - 0 1 13... axb5!! offers an exchange to keep the white queen out of play. 14.Qxa8 Bd4 15.Nxd4 cxd4 16.Qxb8 0-0! 17.Ke1 Qh4 18.g3 Qf6 19.Bf4 g5? (Ivanchuk found 19...d3! during post-game analysis.) 20.Rc1 exf4 21.Qxf4 Qd4 22.Rd1 bxc4 23.e5 Qc3+ 24.Rd2 Re8 25.Bxd3 cxd3 −+ Tasc R30 finds 19... d3! in 2 1/2 hours. 19... Bf5!! is even stronger than 19... d3. Position is already lost at 19... d3 +8.00 for black, ... Bf5 not much better Stockfish 14dev 64bit 4CPU running on 2020 hardware recognises the significance of axb5!! in 1 second. Stockfish_21092606_x64_avx2: NNUE evaluation using nn-13406b1dcbe0.nnue enabled. 21/28 00:01 9264k 4714k -1,22 axb5 Qxa8 Bd4 Nxd4 cxd4 h3 Nf6 Bg5 0-0 cxb5 h6 Bxf6 Qxf6 Re1 Nd7 Kd1 Qg6 Qa4 Qg3 Qc2 Qxa3 Bd3 Qxb4 Qb1 46/67 1:05:00 18113493k 4644k -2,40 axb5 Qxa8 Bd4 h3 Nf6 Nxd4 exd4 Kf2 Nxe4+ Kg1 Nd7 Bg5 Qxg5 Qxc8+ Ke7 Qc7 Qe5 d6+ Qxd6 Qxd6+ Kxd6 bxc5+ Ndxc5 cxb5 d3 h4 d2 Rh3 Ke5 Be2 f5 Ra2 Rd8 Bd1 Rd4 Re3 f4 Re2 b6 a4 Kd6 Rc2 Kd5 Ra2 h6 Rb2 Nxa4 Bxa4 Rxa4 Rexd2+ Nxd2 Rxd2+ Kc4 Rd7 g6 == Problem 7 == FEN 1r1bk2r/2R2ppp/p3p3/1b2P2q/4QP2/4N3/1B4PP/3R2K1 w k - 0 1 1.Rxd8+!! Rxd8 (1...Kxd8 2.Ra7! Qe2 3.Qd4+ Ke8 4.h3 Qe1+ 5.Kh2 Rd8 6.Qc5 Qh4 7.Ba3 Rd7 8.Ra8+ Rd8 9.g3 1−0)
Read more →
Automation integrator

An automation integrator is a systems integrator company or individual who makes different versions of automation hardware and software work together, generally combining several subsystems to work together as one large system. The title may refer to those who only integrate hardware, although these will often work with software integrators. Software created by automation integrators allows devices to communicate with each other, as well as collecting and reporting data. The magazine Control Engineering publishes an annual “Automation Integrator Guide” which lists over 2,000 automation integrators. They also give an annual system integrator of the year award to three automation integration firms. The Control System Integrators Association (CSIA) maintains a buyers' guide of over 1200 member and nonmember systems integrators known as the Industrial Automation Exchange, or CSIA Exchange for short. == Certification == The Control System Integrators Association (CSIA) certifies automation integrators, through an audit based on 79 critical criteria from the best practices manual. Companies must be associate members of the CSIA to be eligible for certification. Integrators can also receive certification through a program launched in 2012 by the Robotics Industries Association. == Industries == Automation Integrators work in a wide variety of industries which use robotics and automation. Some of the most common include:
Read more →
Jaggies

Jaggies are visual artifacts in raster images, most frequently from aliasing, which in turn is often caused by non-linear mixing effects producing high-frequency components, or missing or poor anti-aliasing filtering prior to sampling. Jaggies are stair-like lines that appear where there should be "smooth" straight lines or curves. For example, when a nominally straight, un-aliased line steps across one pixel either horizontally or vertically, a "dogleg" occurs halfway through the line, where it crosses the threshold from one pixel to the other. Jaggies should not be confused with most compression artifacts, which are a different phenomenon. == Causes == Jaggies occur due to the "staircase effect". This is because a line represented in raster mode is approximated by a sequence of pixels. Jaggies can occur for a variety of reasons, the most common being that the output device (display monitor or printer) does not have sufficient resolution to portray a smooth line. In addition, jaggies often occur when a bit-mapped image is scaled to a higher resolution. This is one of the advantages that vector graphics have over bitmapped graphics – a vector image can be losslessly scaled to any arbitrary resolution or stretched infinitely in either axis without introducing jaggies. == Solutions == The effect of jaggies can be reduced by a graphics technique known as spatial anti-aliasing. Anti-aliasing smooths out jagged lines by surrounding them with transparent pixels to simulate the appearance of fractionally-filled pixels when viewed at a distance. The downside of anti-aliasing is that it reduces contrast – rather than sharp black/white transitions, there are shades of gray – and the resulting image can appear fuzzy. This is an inescapable trade-off: if the resolution is insufficient to display the desired detail, the output will either be jagged, fuzzy, or some combination thereof. While machine learning-based upscaling techniques such as DLSS can be used to infer this missing information, other types of artifacts may be introduced in the process. In real-time 3D rendering such as in video games, various anti-aliasing techniques are used to remove jaggies created by the edges of polygons and other contrasting lines. Since anti-aliasing can impose a significant performance overhead, games for home computers often allow users to choose the level and type of anti-aliasing in use in order to optimize their experience, whereas on consoles this setting is typically fixed for each title to ensure a consistent experience. While anti-aliasing is generally implemented through graphics APIs like DirectX and Vulkan, some consoles such as the Xbox 360 and PlayStation 3 are also capable of anti-aliasing to little direct performance cost by way of dedicated hardware which performs anti-aliasing on the contents of the framebuffer once it has been rendered by the GPU. Jaggies in bitmaps, such as sprites and surface materials, are most often dealt with by separate texture filtering routines, which are far easier to perform than anti-aliasing filtering. Texture filtering became ubiquitous on PCs after the introduction of 3Dfx's Voodoo GPU. == Notable uses of the term == In the 1985 game Rescue on Fractalus! for the Atari 8-bit computers, the graphics depicting the cockpit of the player's spacecraft contains two window struts, which are not anti-aliased and are therefore very "jagged". The developers made fun of this and named the in-game enemies "Jaggi", and also initially titled the game Behind Jaggi Lines!. The latter idea was scrapped by the marketing department before release.
Read more →
Control engineering

Control engineering, also known as control systems engineering and, in some European countries, automation engineering, is an engineering discipline that deals with control systems, applying control theory to design equipment and systems with desired behaviors in control environments. The discipline of controls overlaps and is usually taught along with electrical engineering, chemical engineering and mechanical engineering at many institutions around the world. The practice uses sensors and detectors to measure the output performance of the process being controlled; these measurements are used to provide corrective feedback helping to achieve the desired performance. Systems designed to perform without requiring human input are called automatic control systems (such as cruise control for regulating the speed of a car). Multi-disciplinary in nature, control systems engineering activities focus on implementation of control systems mainly derived by mathematical modeling of a diverse range of systems. == Overview == Modern day control engineering is a relatively new field of study that gained significant attention during the 20th century with the advancement of technology. It can be broadly defined or classified as practical application of control theory. Control engineering plays an essential role in a wide range of control systems, from simple household washing machines to high-performance fighter aircraft. It seeks to understand physical systems, using mathematical modelling, in terms of inputs, outputs and various components with different behaviors; to use control system design tools to develop controllers for those systems; and to implement controllers in physical systems employing available technology. A system can be mechanical, electrical, fluid, chemical, financial or biological, and its mathematical modelling, analysis and controller design uses control theory in one or many of the time, frequency and complex-s domains, depending on the nature of the design problem. Control engineering is the engineering discipline that focuses on the modeling of a diverse range of dynamic systems (e.g. mechanical systems) and the design of controllers that will cause these systems to behave in the desired manner. Although such controllers need not be electrical, many are and hence control engineering is often viewed as a subfield of electrical engineering. Electrical circuits, digital signal processors and microcontrollers can all be used to implement control systems. Control engineering has a wide range of applications from the flight and propulsion systems of commercial airliners to the cruise control present in many modern automobiles. In most cases, control engineers utilize feedback when designing control systems. This is often accomplished using a proportional–integral–derivative controller (PID controller) system. For example, in an automobile with cruise control the vehicle's speed is continuously monitored and fed back to the system, which adjusts the motor's torque accordingly. Where there is regular feedback, control theory can be used to determine how the system responds to such feedback. In practically all such systems stability is important and control theory can help ensure stability is achieved. Although feedback is an important aspect of control engineering, control engineers may also work on the control of systems without feedback. This is known as open loop control. A classic example of open loop control is a washing machine that runs through a pre-determined cycle without the use of sensors. == History == Automatic control systems were first developed over two thousand years ago. The first feedback control device on record is thought to be the ancient Ktesibios's water clock in Alexandria, Egypt, around the third century BCE. It kept time by regulating the water level in a vessel and, therefore, the water flow from that vessel. This certainly was a successful device as water clocks of similar design were still being made in Baghdad when the Mongols captured the city in 1258 CE. A variety of automatic devices have been used over the centuries to accomplish useful tasks or simply just to entertain. The latter includes the automata, popular in Europe in the 17th and 18th centuries, featuring dancing figures that would repeat the same task over and over again; these automata are examples of open-loop control. Milestones among feedback, or "closed-loop" automatic control devices, include the temperature regulator of a furnace attributed to Drebbel, circa 1620, and the centrifugal flyball governor used for regulating the speed of steam engines by James Watt in 1788. In his 1868 paper "On Governors", James Clerk Maxwell was able to explain instabilities exhibited by the flyball governor using differential equations to describe the control system. This demonstrated the importance and usefulness of mathematical models and methods in understanding complex phenomena, and it signaled the beginning of mathematical control and systems theory. Elements of control theory had appeared earlier but not as dramatically and convincingly as in Maxwell's analysis. Control theory made significant strides over the next century. New mathematical techniques, as well as advances in electronic and computer technologies, made it possible to control significantly more complex dynamical systems than the original flyball governor could stabilize. New mathematical techniques included developments in optimal control in the 1950s and 1960s followed by progress in stochastic, robust, adaptive, nonlinear control methods in the 1970s and 1980s. Applications of control methodology have helped to make possible space travel and communication satellites, safer and more efficient aircraft, cleaner automobile engines, and cleaner and more efficient chemical processes. Before it emerged as a unique discipline, control engineering was practiced as a part of mechanical engineering and control theory was studied as a part of electrical engineering since electrical circuits can often be easily described using control theory techniques. In the first control relationships, a current output was represented by a voltage control input. However, not having adequate technology to implement electrical control systems, designers were left with the option of less efficient and slow responding mechanical systems. A very effective mechanical controller that is still widely used in some hydro plants is the governor. Later on, previous to modern power electronics, process control systems for industrial applications were devised by mechanical engineers using pneumatic and hydraulic control devices, many of which are still in use today. === Mathematical modelling === David Quinn Mayne, (1930–2024) was among the early developers of a rigorous mathematical method for analysing Model predictive control algorithms (MPC). It is currently used in tens of thousands of applications and is a core part of the advanced control technology by hundreds of process control producers. MPC's major strength is its capacity to deal with nonlinearities and hard constraints in a simple and intuitive fashion. His work underpins a class of algorithms that are probably correct, heuristically explainable, and yield control system designs which meet practically important objectives. == Control systems == == Control theory == == Education == At many universities around the world, control engineering courses are taught primarily in electrical engineering and mechanical engineering, but some courses can be instructed in mechatronics engineering, and aerospace engineering. In others, control engineering is connected to computer science, as most control techniques today are implemented through computers, often as embedded systems (as in the automotive field). The field of control within chemical engineering is often known as process control. It deals primarily with the control of variables in a chemical process in a plant. It is taught as part of the undergraduate curriculum of any chemical engineering program and employs many of the same principles in control engineering. Other engineering disciplines also overlap with control engineering as it can be applied to any system for which a suitable model can be derived. However, specialised control engineering departments do exist, for example, in Italy there are several master in Automation & Robotics that are fully specialised in Control engineering or the Department of Automatic Control and Systems Engineering at the University of Sheffield or the Department of Robotics and Control Engineering at the United States Naval Academy and the Department of Control and Automation Engineering at the Istanbul Technical University. Control engineering has diversified applications that include science, finance management, and even human behavior. Students of control engineering may start with a linear control system course dealing with the time and complex-s domain, which req
Read more →
Aporia (company)

Aporia is a machine learning observability platform based in Tel Aviv, Israel. The company has a US office located in San Jose, California. Aporia has developed software for monitoring and controlling undetected defects and failures used by other companies to detect and report anomalies, and warn in the early stages of faults. == History == Aporia was founded in 2019 by Liran Hason and Alon Gubkin. In April 2021, the company raised a $5 million seed round for its monitoring platform for ML models. In February 2022, the company closed a Series A round of $25 million for its ML observability platform. Aporia was named by Forbes as the Next Billion-Dollar Company in June 2022. In November, the company partnered with ClearML, an MLOPs platform, to improve ML pipeline optimization. In January 2023, Aporia launched Direct Data Connectors, a novel technology allowing organizations to monitor their ML models in minutes (previously the process of integrating ML monitoring into a customer’s cloud environment took weeks or more.) DDC (Direct Data Connectors) enables users to connect Aporia to their preferred data source and monitor all of their data at once, without data sampling or data duplication (which is a huge security risk for major organizations. In April 2023, Aporia announced the company partnered with Amazon Web Services (AWS) to provide more reliable ML observability to AWS consumers by deploying Aporia's architecture to their AWS environment, this will allow customers to monitor their models in production regardless of platform.
Read more →
Automated attendant

In telephony, an automated attendant (also auto attendant, auto-attendant, autoattendant, automatic phone menus, AA, or virtual receptionist) allows callers to be automatically transferred to an extension without the intervention of an operator/receptionist. Many AAs will also offer a simple menu system ("for sales, press 1, for service, press 2," etc.). An auto attendant may also allow a caller to reach a live operator by dialing a number, usually "0". Typically the auto attendant is included in a business's phone system such as a PBX, but some services allow businesses to use an AA without such a system. Modern AA services (which now overlap with more complicated interactive voice response or IVR systems) can route calls to mobile phones, VoIP virtual phones, other AAs/IVRs, or other locations using traditional land-line phones or voice message machines. == Feature description == Telephone callers will recognize an automated attendant system as one that greets calls incoming to an organization with a recorded greeting of the form, "Thank you for calling .... If you know your party's extension, you may dial it any time during this message." Callers who have a touch-tone (DTMF) phone can dial an extension number or, in most cases, wait for operator ("attendant") assistance. Since the telephone network does not transmit the DC signals from rotary dial telephones (except for audible clicks), callers who have rotary dial phones have to wait for assistance. On a purely technical level it could be argued that an automated attendant is a very simple kind of IVR however, in the telecom industry the terms IVR and auto attendant are generally considered distinct. An automated attendant serves a very specific purpose (replace live operator and route calls), whereas an IVR can perform all sorts of functions (telephone banking, account inquiries, etc.). An AA will often include a directory which will allow a caller to dial by name in order to find a user on a system. There is no standard format to these directories, and they can use combinations of first name, last name, or both. The following lists common routing steps that are components of an automated attendant: Transfer to extension Transfer to voicemail Play message (i.e., "our address is ...") Go to a sub-menu Repeat choices In addition, an automated attendant would be expected to have values for the following: '0' – where to go when the caller dials '0' Timeout – what to do if the caller does nothing (usually go to the same place as '0') Default mailbox – where to send calls if '0' is not answered (or is not pointing to a live person) == Background == PBXs (private branch exchanges) or PABXs (private automatic branch exchanges) are telephone systems that serve an organization that has many telephone extensions but fewer telephone lines (sometimes called "trunks") that connect that organization to the rest of the global telecommunications network. While persons within an enterprise served by a PBX can call each other by dialing their extension numbers, incoming calls, i.e., calls originating from a telephone not served by the PBX but intended for a party served by the PBX, required assistance from a switchboard operator (also called a "switchboard attendant") or a telephone service called DID ("direct inward dialing"). Direct inward dialing has advantages such as rapid connection to the destination party and disadvantages including cost, lack of identification of the called organization and use of ten-digit telephone numbers. Automated attendants provide, among many other things, a way for an external caller to be directed to an extension or department served by a PBX system without using direct inward dialing or without switchboard attendant assistance. == History == Automated attendants are not part of voicemail systems. Voice messaging (or voicemail or VM) technology has existed since the late 1970s; in the early 1980s companies provided voice-prompting systems that allowed callers to reach (route the call) to an intended party, not necessarily to leave a message. Automated attendant systems are also referred to as automated menu systems and much early work in this field was done by Michael J. Freeman, Ph.D. == Time-based routing == Many auto attendants will have options to allow for time-of-day routing, as well as weekend and holiday routing. The specifics of these features will depend entirely on the particular automated attendant, but typically there would be a normal greeting and routing steps that would take place during normal business hours, and a different greeting and routing for non-business hours.
Read more →
Continuum robot

A continuum robot is a type of robot that is characterised by infinite degrees of freedom and number of joints. These characteristics allow continuum manipulators to adjust and modify their shape at any point along their length, granting them the possibility to work in confined spaces and complex environments where standard rigid-link robots cannot operate. In particular, we can define a continuum robot as an actuatable structure whose constitutive material forms curves with continuous tangent vectors. This is a fundamental definition that allows to distinguish between continuum robots and snake-arm robots or hyper-redundant manipulators: the presence of rigid links and joints allows them to only approximately perform curves with continuous tangent vectors. The design of continuum robots is bioinspired, as the intent is to resemble biological trunks, snakes and tentacles. Several concepts of continuum robots have been commercialised and can be found in many different domains of application, ranging from the medical field to undersea exploration. == Classification == Continuum robots can be categorised according to two main criteria: structure and actuation. === Structure === The main characteristic of the design of continuum robots is the presence of a continuously curving core structure, named backbone, whose shape can be actuated. The backbone must also be compliant, meaning that the backbone yields smoothly to external loads. According to the design principles chosen for the continuum manipulator, we can distinguish between: single-backbone: these continuum manipulators have one central elastic backbone through which actuation/transmission elements can run. multi-backbone: the structure of these continuum robots has two or more elastic elements (either rods or tubes) parallel to each other and constrained with one another in some way. concentric-tube: the backbone is made of concentric tubes that are free to rotate and translate between each other, depending on the actuation happening at the base of the robot. === Actuation === The actuation strategy of continuum manipulators can be distinguished between extrinsic or intrinsic actuation, depending on where the actuation happens: extrinsic actuation: the actuation happens outside the main structure of the robot and the forces are transmitted via mechanical transmission; among these techniques, there are cable/tendon driven actuators and multi-backbone strategies. intrinsic actuation: the actuation mechanism operates within the structure of the robot; these strategies include pneumatic or hydraulic chambers and the shape memory effect. The Actuated Flexible Manifold (AFM), introduced by Medina, Shapiro, and Shvalb (2016), models flexible grid-based robots that approximate smooth manifolds using discrete segments, each contributing one degree of freedom. Their work provides forward and inverse kinematics for planar and spatial configurations, bridging hyper-redundant and continuum robotics. == Advantages == The particular design of continuum robots offers several advantages with respect to rigid-link robots. First of all, as already said, continuum robots can more easily operate in environments that require a high level of dexterity, adaptability and flexibility. Moreover, the simplicity of their structure makes continuum robots more prone to miniaturisation. The rise of continuum robots has also paved the way for the development of soft continuum manipulators. These continuum manipulators are made of highly compliant materials that are flexible and can adapt and deform according to the surrounding environment. The "softness" of their material grants higher safety in human-robot interactions. == Disadvantages == The particular design of continuum robots also introduces many challenges. To properly and safely use continuum robots, it is crucial to have an accurate force and shape sensing system. Traditionally, this is done using cameras that are not suitable for some of the applications of continuum robots (e.g. minimally invasive surgery), or using electromagnetic sensors that are however disturbed by the presence of magnetic objects in the environment. To solve this issue, in the last years fiber-Bragg-grating sensors have been proposed as a possible alternative and have shown promising results. It is also necessary to notice that while the mechanical properties of rigid-link robots are fully understood, the comprehension of the behaviour and properties of continuum robots is still subject of study and debate. This poses new challenges in developing accurate models and control algorithms for this kind of robots. == Modelling == Creating an accurate model that can predict the shape of a continuum robot allows to properly control the robot's shape. There are three main approaches to model continuum robots: Cosserat rod theory: this approach is an exact solution to the static of a continuum robot, as it is not subject to any assumption. It solves a set of equilibrium equations between position, orientation, internal force and torque of the robot. This method requires to be solved numerically and it is therefore computationally expensive, due to its high complexity. Constant curvature: this technique assumes the backbone to be made of a series of mutually tangent sections that can be approximated as arcs with constant curvature. This approach is also known as piecewise constant-curvature. This assumption can be applied to the entire segment of the backbone or to its subsegments. This model has shown promising results, however it must be taken into account that the segment/subsegments of the backbone may not comply to the constant curvature assumption and therefore the model's behaviour may not entirely reflect the behaviour of the robot. Rigid-link model: this approach is based on the assumption that the continuum robot can be divided in small segments with rigid links. This is a strong assumption, since if the number of segments is too low, the model hardly behaves like the continuum robot, while increasing the number of segments means increasing the number of variables, and thus complexity. Despite this limitation, rigid-link modelling allows the use of the standard control techniques that are well known for rigid-link robots. It has been proven that this model can be coupled with shape and force sensing to mitigate its inaccuracy and can lead to promising results. == Sensing == To develop accurate control algorithms, it is necessary to complement the presented modelling techniques with real time shape sensing. The following options are currently available: Electromagnetic (EM) sensing: shape is reconstructed thanks to the mutual induction between a magnetic field generator and a magnetic field sensor. The most common external EM tracking system is the commercially available NDI Aurora: small sensors can be placed on the robot and their position is tracked in an external generated magnetic field. The validity of this method has been extensively assessed, however its performance is hindered by the limited workspace, whose dimension depends on the magnetic field. Another alternative is to embed the sensors internally in the continuum robot, combining magnetic sensors with Hall effect sensors: the magnetic field is measured at the level of the Hall effect sensors in order to estimate the deflection of the robot. However, it has been noticed that the higher the bending of the manipulator, the higher is the estimation error, due to crosstalk between sensors and magnets. Optical sensing: fiber Bragg grating sensors incorporated in an optical fiber can be embedded into the backbone of the continuum robot to estimate its shape; these sensors can only reflect a small range of the input light spectrum depending on their strain; therefore, by measuring the strain on each sensor it is possible to obtain the shape of the robot. This type of sensor is however expensive and is more prone to breaking in case of excessive strain, and this can happen in robots that can perform high deflections. == Control strategies == The control strategies can be distinguished in static and dynamic; the first one is based on the steady-state assumption, while the latter also considers the dynamic behaviour of the continuum robot. We can also differentiate between model-based controllers, that depend on a model of the robot, and model-free, that learn the robot's behaviour from data. Model-based static controllers: they rely on one of the modelling approaches presented above; once the model is defined, the kinematics must be inverted to obtain the desired actuator or configuration space variables. There are several ways to do this, like differential inverse kinematics, direct inversion or optimization. Model-free static controllers: these approaches learn directly, via machine learning techniques (e.g. regression methods and neural networks), the inverse kinematic or the direct kinematic representation of the con
Read more →
CinePlayer

CinePlayer is a software based media player used to review Digital Cinema Packages (DCP) without the need for a digital cinema server by Doremi Labs. CinePlayer can play back any DCP, not just those created by Doremi Mastering products. In addition to playing DCPs, CinePlayer can also playback JPEG2000 image sequences and many popular multimedia file types. There are two versions of CinePlayer available, standard and Pro. The standard version supports playback of non-encrypted, 2D DCP's up to 2K resolution. The Pro version supports playback of encrypted, 2D or 3D DCP's with subtitles up to 4K resolution. == Supported formats == === Containers === AVI MOV MXF MPG TS WMV M2TS MTS MP4 MKV === Video codecs === JPEG2000 ProRes 422 DNxHD YUV Uncompressed 8-10 bits DIVX XVID MPEG4 AVC / H-264 VC-1 MPEG2 === Supported image sequences === BMP TIFF TGA DPX JPG J2C === Supported audio files === WAV MP3 WMA MP2
Read more →
LTX (text-to-video model)

LTX is a family of open source artificial intelligence video foundation models developed by Lightricks, and first released in November 2024. The latest models, LTX-2, create videos based on user prompts. They were preceded by LTX Video, which was released in 2024 as the company's first text-to-video model. LTX-2 is part of the LTX family of video generation models, which form the core technology, alongside LTX Studio, of the LTX ecosystem. == History == === Origins: LTX Video (2024–2025) === In November 2024 Lightricks publicly released its first text-to-video model, LTX Video. It was a 2-billion parameter model, available as open source. In May 2025 Lightricks launched LTXV-13b, a version with 13-billion parameters. Two months later, the model broke the 60 second barrier for generated video. === Release of LTX-2 (2025) === In October 2025 Lightricks announced its latest model, and renamed it LTX-2. The model was described as capable of generating synchronized audio and video at native 4K resolution and up to 50 frames per second (fps), using a variety of conditions and prompts, including text-to-video and image-to-video. Google highlighted the fact that LTX-2 was trained on its infrastructure, and saying it was "The first open source AI video generation model, powered by Google Cloud". Upon its release it was ranked in the top-3 models for image-to-video creation by Artificial Analysis, behind Kling 3.5 by Kling AI and Veo 3.1 by Google. Its text-to-image option was ranked 7th. In addition to its open-source release, Lightricks offers API access to LTX-2, allowing developers to generate videos from text and image prompts through a hosted service without running the model locally. === Open Source Release (2026) === In January 2026, Lightricks officially released the full open-source version of LTX-2, making the model’s complete codebase, weights, and associated tooling publicly available. In March 2026 the company released LTX-2.3, which was accompanied by a desktop video editor enabling the entire model to run locally on consumer hardware. == Technical features == === Advancements over LTX Video === LTX-2 builds upon the LTX Video architecture with several major improvements: Unified audio-video generation producing synchronized dialogue, ambience, and motion Native 4K rendering 50-fps output for cinematic motion Three operational modes (Fast, Pro, Ultra) More efficient diffusion pipelines enabling high fidelity on consumer GPUs === Core capabilities === Text-to-video generation Image-to-video generation Multimodal audiovisual synthesis High-resolution spatial and temporal coherence Configurable quality/performance settings Open-source distribution of weights and datasets == Reception == Initial reception to LTX-2 was broadly positive, with several technology and media outlets highlighting its open-source approach and multimodal capabilities. Open Source For You described LTX-2 as “one of the first AI video systems to combine 4K output, synchronized audio, and an open model release,” noting that it positioned Lightricks as a significant competitor to proprietary systems such as OpenAI's Sora and Google's Veo. IEA Green said that the model “could rewrite the AI filmmaking game,” emphasizing that its 50-fps rendering and unified audio-video generation made it suitable for professional studios and independent creators alike. AI News characterized LTX-2 as a “major step forward in the democratization of cinematic-quality video generation,” praising its consumer-grade hardware efficiency and multi-tier generation modes, while also noting ongoing challenges in long-form temporal stability. FinancialContent reported strong interest among creative agencies, attributing the attention to Lightricks’ decision to release model weights and datasets, which reviewers said enabled “a level of transparency not typically seen in commercial AI video models.” === Benchmarks and rankings === Upon release, LTX-2 ranked third for image-to-video creation in the Artificial Analysis benchmark, behind Kling 3.5 and Veo 3.1, while its text-to-video option ranked seventh. As of early 2026, it was the highest-ranked open-source model in the benchmark. === Limitations === Some early reviewers also pointed out quality limitations. The Ray3 technical review noted occasional inconsistencies in lip-sync and motion tracking during long scenes, though it stated these were “in line with the challenges faced by all current AI video diffusion models” and expected to improve with continued iteration. Like other diffusion-based video generators, LTX-2 can produce artifacts in complex multi-person scenes and may struggle with precise text rendering within generated video.
Read more →
List of speech recognition software

Speech recognition software is available for many computing platforms, operating systems, use models, and software licenses. Here is a listing of such, grouped in various useful ways. == Acoustic models and speech corpus (compilation) == The following list presents notable speech recognition software engines with a brief synopsis of characteristics. == Macintosh == == Cross-platform web apps based on Chrome == The following list presents notable speech recognition software that operate in a Chrome browser as web apps. They make use of HTML5 Web-Speech-API. == Mobile devices and smartphones == Many mobile phone handsets, including feature phones and smartphones such as iPhones and BlackBerrys, have basic dial-by-voice features built in. Many third-party apps have implemented natural-language speech recognition support, including: == Windows == === Windows built-in speech recognition === The Windows Speech Recognition version 8.0 by Microsoft comes built into Windows Vista, Windows 7, Windows 8 and Windows 10. Speech Recognition is available only in English, French, Spanish, German, Japanese, Simplified Chinese, and Traditional Chinese and only in the corresponding version of Windows; meaning you cannot use the speech recognition engine in one language if you use a version of Windows in another language. Windows 7 Ultimate and Windows 8 Pro allow you to change the system language, and therefore change which speech engine is available. Windows Speech Recognition evolved into Cortana (software), a personal assistant included in Windows 10. === Windows 7, 8, 10, 11 third-party speech recognition === Braina – Dictate into third party software and websites, fill web forms and execute vocal commands. Dragon NaturallySpeaking from Nuance Communications – Successor to the older DragonDictate product. Focus on dictation. 64-bit Windows support since version 10.1. Tazti – Create speech command profiles to play PC games and control applications – programs. Create speech commands to open files, folders, webpages, applications. Windows 7, Windows 8 and Windows 8.1 versions. Voice Finger – software that improves the Windows speech recognition system by adding several extensions to it. The software enables controlling the mouse and the keyboard by only using the voice. It is especially useful for aiding users to overcome disabilities or to heal from computer injuries. === Microsoft Speech API === The first version of the Microsoft Speech API was released for Windows NT 3.51 and Windows 95 in 1995, it was then part of Windows up to Windows Vista. This initial version already contained Direct Speech Recognition and Direct Text To Speech APIs which applications could use to directly control engines, as well as simplified 'higher-level' Voice Command and Voice Talk APIs. Speech recognition functionality included as part of Microsoft Office and on Tablet PCs running Microsoft Windows XP Tablet PC Edition. It can also be downloaded as part of the Speech SDK 5.1 for Windows applications, but since that is aimed at developers building speech applications, the pure SDK form lacks any user interface (numerous applications were available), and thus is unsuitable for end users. == Built-in software == Microsoft Kinect includes built-in software which allows speech recognition of commands. Older generations of Nokia phones like Nokia N Series (before using Windows 7 mobile technology) used speech-recognition with family names from contact list and a few commands. Siri, originally implemented in the iPhone 4S, Apple's personal assistant for iOS, which uses technology from Nuance Communications. Cortana (software), Microsoft's personal assistant built into Windows Phone and Windows 10. == Interactive voice response == The following are interactive voice response (IVR) systems: CSLU Toolkit Genesys HTK – copyrighted by Microsoft, but allows altering software for licensee's internal use LumenVox ASR Tellme Networks; acquired by Microsoft == Unix-like x86 and x86-64 speech transcription software == Janus Recognition Toolkit (JRTk) Mozilla DeepSpeech was developing an open-source Speech-To-Text engine based on Baidu's deep speech research paper. Weesper Neon Flow – professional voice-dictation software that provides offline speech-to-text processing on macOS and Windows using local AI models. It is not open source and offers a paid subscription after a 15‑day free trial. Vocalinux – open-source speech transcription software for Linux. == Discontinued software == IBM VoiceType (formerly IBM Personal Dictation System) IBM ViaVoice – Embedded version still maintained by IBM. No longer supported for versions above Windows Vista. Untested above macOS 10.4 or on Macintoshes with an Intel chipset. Quack.com; acquired by AOL; the name has now been reused for an iPad search app. SpeechWorks from Nuance Communications. Yap Speech Cloud – Speech-to-text platform acquired by Amazon.com.
Read more →
ArcSoft ShowBiz

ShowBiz is a video editor by ArcSoft for the Windows operating system. It can create VCD and DVDs and can also export to the formats AVI, MPEG, WMV, and MOV. ShowBiz also contains a DVD burning and menu building feature. As of 2003, it was one of the three most dominant bundled titles. == Reception == PC Magazine reviewer Jan Ozer states: "ArcSoft's ShowBiz has evolved into a competent editor that's generally more usable than Dazzle's MovieStar program, providing more configuration controls, better preview features, and a much greater range of fun effects." John Virata, senior editor of Digital Media Online, says in his three page review of ShowBiz DVD 2, "It is an easy editor to work with and has a logically laid out interface that takes you step by step through the video creation and DVD creation process"
Read more →