AI Grammar Remover

AI Grammar Remover — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Vanish (computer science)

  Vanish was a project to "give users control over the lifetime of personal data stored on the web." It was led by Roxana Geambasu at the University of Washington. The project proposed to allow a user to enter information to send across the internet, thereby relinquishing control of it. However, the user can include an "expiration date," after which the information is no longer usable by anyone who may have a copy of it, even the creator. The Vanish approach was found to be vulnerable to a Sybil attack and thus insecure by a team called Unvanish from the University of Texas, University of Michigan, and Princeton. == Theory == Vanish acts by automating the encryption of information entered by the user with an encryption key that is unknown to the user. Along with the information the user enters, the user also enters metadata concerning how long the information should remain available. The system then encrypts the information but does not store either the encryption key or the original information. Instead, it breaks up the decryption key into smaller components that are disseminated across distributed hash tables, or DHTs, via the Internet. The DHTs refresh information within their nodes on a set schedule unless configured to make the information persistent. The time delay entered by the user in the metadata controls how long the DHTs should allow the information to persist, but once that time period is over, the DHTs will reuse those nodes, making the information about the decryption stored irretrievable. As long as the decryption key may be reassembled from the DHTs, the information is retrievable. However, once the period entered by the user has lapsed, the information is no longer recoverable, as the user never possessed the decryption key. == Implementation == Vanish currently exists as a Firefox plug-in which allows a user to enter text into either a standard Gmail email or Facebook message and choose to send the message via Vanish. The message is then encrypted and sent via the normal networking pathways through the cloud to the recipient. The recipient must have the same Firefox plug-in to decrypt the message. The plugin accesses BitTorrent DHTs, which have 8-hour lifespans. This means the user may select an expiration date for the message in increments of 8 hours. After the expiration of the user-defined time span, the information in the DHT is overwritten, thereby eliminating the key. While both the user and recipient may have copies of the original encrypted message, the key used to turn it back into plain text is now gone. Although this particular instance of the data has become inaccessible, it's important to note that the information can always be saved by other means before expiration (copied or even via screen shots) and published again.

  Read more →
• 

  Cozi

  Cozi is a family organization website and mobile app designed to streamline household management. It offers shared calendars, to-do lists, shopping lists, and messaging tools, allowing multiple users to coordinate under one account. Founded in 2005 by former Microsoft employees, Cozi has evolved through acquisitions and now operates under OurFamilyWizard. The app is available in both free and premium versions on iOS, Android, and desktop platforms. == History == Cozi was founded in 2005 by Robbie Cape and Jan Miksovsky, two former Microsoft employees who sought to simplify family logistics with technology. The company's first product, Cozi Central, was released on September 25, 2006, and included a family calendar, shopping lists, family messaging and a photo collage screensaver. The company is based in Seattle, Washington. Cozi has both a freemium version, and a paid version called Cozi Gold. Cozi Gold's additional features include Cozi Contacts, a birthday tracker, more reminders, mobile month view, and change notifications. The software can be used on desktop or mobile applications for iOS and Android. On June 5, 2011, Cozi set a Guinness World Record for the longest line of ducks in a row. The line stretched for one mile and was made up of 17,782 rubber ducks. Cozi was acquired by Time Inc. in 2014. After the Meredith Corporation acquired Time in 2018, Cozi was moved into the Parents Network division. On May 4, 2022, Cozi was acquired by OurFamilyWizard of Minneapolis, Minnesota, reporting more than 20 million registered users.

  Read more →
• 

  Message queuing service

  A message queueing service is a message-oriented middleware or MOM deployed in a compute cloud using software as a service model. Service subscribers access queues and or topics to exchange data using point-to-point or publish and subscribe patterns. It's important to differentiate between event-driven and message-driven (aka queue driven) services: Event-driven services (e.g. AWS SNS) are decoupled from their consumers. Whereas queue / message driven services (e.g. AWS SQS) are coupled with their consumers. Message queues can be a good buffer to handle spiky workloads but they have a finite capacity. According to Gregor Hohpe, message queues require proper mechanisms (aka flow controls) to avoid filling the queue beyond its manageable capacity and to keep the system stable. == Ordering Guarantees in Message Queues == Amazon SQS FIFO and Azure Service Bus sessions are queue-based messaging systems that provide ordering guarantees within a message group or session attempt but do not necessarily guarantee ordered delivery in cases of retries or failures. In SQS FIFO, messages in the same message group are processed in order, with subsequent messages held until the preceding message is successfully processed or moved to the dead-letter queue (DLQ). Once a message is placed in the DLQ, it is no longer retried, creating a gap in the sequence. However, the remaining messages continue to be delivered in order. Azure Service Bus sessions function similarly by maintaining ordering within a session, provided a single consumer processes messages sequentially. The implementation differs from SQS FIFO but follows the same fundamental ordering principle. In contrast, Apache Kafka is a distributed log-based messaging system that guarantees ordering within individual partitions rather than across the entire topic. Unlike queue-based systems, Kafka retains messages in a durable, append-only log, allowing multiple consumers to read at different offsets. Kafka uses manual offset management, giving consumers control over retries and failure handling. If a consumer fails to process a message, it can delay committing the offset, preventing further progress in that partition while other partitions remain unaffected. This partition-based design enables fault isolation and parallel processing while allowing ordering to be maintained within partitions, depending on consumer handling. == Vendors == Apache Kafka Apache Kafka is a distributed system consisting of servers that store and forward messages between producer client and consumer applications. IBM MQ IBM MQ offers a managed service that can be used on IBM Cloud and Amazon Web Services. Microsoft Azure Service Bus Service Bus offers queues, topics & subscriptions, and rules/actions in order to support publish-subscribe, temporal decoupling, and load balancing scenarios. Azure Service Bus is built on AMQP allowing any existing AMQP 1.0 client stack to interact with Service Bus directly or via existing .Net, Java, Node, and Python clients. Standard and Premium tiers allow for pay as you go or isolated resources at massive scale. Oracle Messaging Cloud Service This service provides a messaging solution for applications for asynchronous communication and is influenced by the Java Message Service (JMS) API specification. Any application platform that understands HTTP can also use Oracle Messaging Cloud Service through the REST interface. For Java applications, Oracle Messaging Cloud Service provides a Java library that implements and extends the JMS 1.1 interface. The Java library implements the JMS API by acting as a client of the REST API. Amazon Simple Queue Service Supports messages natively up to 256K, or up to 2GB by transmitting payload via S3. Highly scalable, durable and resilient. Provides loose-FIFO and 'at least once' delivery in order to provide massive scale. Supports REST API and optional Java Message Service client. Low latency. Utilizes Amazon Web Services. IronMQ Supports messages up to 64k; guarantees order; guarantees once only delivery; no delays retrieving messages. Supports REST API and beanstalkd open source protocol. Runs on multiple clouds including AWS and Rackspace. Scaling must be managed by user. RabbitMQ RabbitMQ is a reliable and mature messaging and streaming broker, which is easy to deploy on cloud environments, on-premises, and on your local machine. Supports AMQP, STOMP, MQTT StormMQ Open platform supports messages up to 50Mb. Uses AMQP to avoid vendor lock-in and provide language neutrality. Locate-It Option allows customers to audit the location of their data at all times and satisfy data protection principles. AnypointMQ An enterprise multi-tenant, cloud messaging service that performs advanced asynchronous messaging scenarios between applications. Anypoint MQ is fully integrated with Anypoint Platform, offering role based access control, client application management, and connectors.

  Read more →
• 

  Rclone

  Rclone is an open source, multi threaded, command line computer program to manage or migrate content on cloud and other high latency storage. Its capabilities include sync, transfer, crypt, cache, union, compress and mount. The rclone website lists supported backends including S3 and Google Drive. Descriptions of rclone often carry the strapline "Rclone syncs your files to cloud storage". Those prior to 2020 include the alternative "Rsync for Cloud Storage". Rclone is well known for its rclone sync and rclone mount commands. It provides further management functions analogous to those ordinarily used for files on local disks, but which tolerate some intermittent and unreliable service. Rclone is commonly used with media servers such as Plex, Emby or Jellyfin to stream content direct from consumer file storage services. Official Ubuntu, Debian, Fedora, Gentoo, Arch, Brew, Chocolatey, and other package managers include rclone. == History == Nick Craig-Wood was inspired by rsync. Concerns about the noise and power costs arising from home computer servers prompted him to embrace cloud storage and he began developing rclone as open source software in 2012 under the name swiftsync. Rclone was promoted to stable version 1.00 in July 2014. In May 2017, Amazon Drive barred new users of rclone and other upload utilities, citing security concerns. Amazon Drive had been advertised as offering unlimited storage for £55 per year. Amazon's AWS S3 service continues to support new rclone users. The original rclone logo was updated in September 2018. In March 2020, Nick Craig-Wood resigned from Memset Ltd, a cloud hosting company he founded, to focus on open source software. Amazon's AWS April 2020 public sector blog explained how the Fred Hutch Cancer Research Center were using rclone in their Motuz tool to migrate very large biomedical research datasets in and out of AWS S3 object stores. In November 2020, rclone was updated to correct a weakness in the way it generated passwords. Passwords for encrypted remotes can be generated randomly by rclone or supplied by the user. In all versions of rclone from 1.49.0 to 1.53.2 the seed value for generated passwords was based on the number of seconds elapsed in the day, and therefore not truly random. CVE-2020-28924 recommended users upgrade to the latest version of rclone and check the passwords protecting their encrypted remotes. Release 1.55 of rclone in March 2021 included features sponsored by CERN and their CS3MESH4EOSC project. The work was EU funded to promote vendor-neutral application programming interfaces and protocols for synchronisation and sharing of academic data on cloud storage. == Backends and commands == Rclone supports the following services as backends. There are others, built on standard protocols such as WebDAV or S3, that work. WebDAV backends do not support rclone functionality dependent on server side checksum or modtime. Remotes are usually defined interactively from these backends, local disk, or memory (as S3), with rclone config. Rclone can further wrap those remotes with one or more of alias, chunk, compress, crypt or union, remotes. Once defined, the remotes are referenced by other rclone commands interchangeably with the local drive. Remote names are followed by a colon to distinguish them from local drives. For example, a remote example_remote containing a folder, or pseudofolder, myfolder is referred to within a command as a path example_remote:/myfolder. Rclone commands directly apply to remotes, or mount them for file access or streaming. With appropriate cache options the mount can be addressed as if a conventional, block level disk. Commands are provided to serve remotes over SFTP, HTTP, WebDAV, FTP and DLNA. Commands can have sub-commands and flags. Filters determine which files on a remote that rclone commands are applied to. rclone rc passes commands or new parameters to existing rclone sessions and has an experimental web browser interface. === Crypt remotes === Rclone's crypt implements encryption of files at rest in cloud storage. It layers an encrypted remote over a pre-existing, cloud or other remote. Crypt is commonly used to encrypt / decrypt media, for streaming, on consumer storage services such as Google Drive. Rclone's configuration file contains the crypt password. The password can be lightly obfuscated, or the whole rclone.conf file can be encrypted. Crypt can either encrypt file content and name, or additionally full paths. In the latter case there is a potential clash with encryption for cloud backends, such as Microsoft OneDrive, having limited path lengths. Crypt remotes do not encrypt object modification time or size. The encryption mechanism for content, name and path is available, for scrutiny, on the rclone website. Key derivation is with scrypt. === Example syntax (Linux) === These examples describe paths and file names but object keys behave similarly. To recursively copy files from directory remote_stuff, at the remote xmpl, to directory stuff in the home folder:- -v enables logging and -P, progress information. By default rclone checks the file integrity (hash) after copy; can retry each file up to three times if the operation is interrupted; uses up to four parallel transfer threads, and does not apply bandwidth throttling. Running the above command again copies any new or changed files at the remote to the local folder but, like default rsync behaviour, will not delete from the local directory, files which have been removed from the remote. To additionally delete files from the local folder which have been removed from the remote - more like the behaviour of rsync with a --delete flag:- And to delete files from the source after they have been transferred to the local directory - more like the behaviour of rsync with a --remove-source-file flag:- To mount the remote directory at a mountpoint in the pre-existing, empty stuff directory in the home directory (the ampersand at the end makes the mount command run as a background process):- Default rclone syntax can be modified. Alternative transfer, filter, conflict and backend specific flags are available. Performance choices include number of concurrent transfer threads; chunk size; bandwidth limit profiling, and cache aggression. == Academic evaluation == In 2018, University of Kentucky researchers published a conference paper comparing use of rclone and other command line, cloud data transfer agents for big data. The paper was published as a result of funding by the National Science Foundation. Later that year, University of Utah's Center for High Performance Computing examined the impact of rclone options on data transfer rates. == Rclone use at HPC research sites == Examples are University of Maryland, Iowa State University, Trinity College Dublin, NYU, BYU, Indiana University, CSC Finland, Utrecht University, University of Nebraska, University of Utah, North Carolina State University, Stony Brook, Tulane University, Washington State University, Georgia Tech, National Institutes of Health, Wharton, Yale, Harvard, Minnesota, Michigan State, Case Western Reserve University, University of South Dakota, Northern Arizona University, University of Pennsylvania, Stanford, University of Southern California, UC Santa Barbara, UC Irvine, UC Berkeley, and SURFnet. == Rclone and cybercrime == May 2020 reports stated rclone had been used by hackers to exploit Diebold Nixdorf ATMs with ProLock ransomware. The FBI issued a Flash Alert MI-000125-MW on May 4, 2020, in relation to the compromise. They issued a further, related alert 20200901–001 in September 2020. Attackers had exfiltrated / encrypted data from organisations involved in healthcare, construction, finance, and legal services. Multiple US government agencies, and industrial entities were affected. Researchers established the hackers spent about a month exploring the breached networks, using rclone to archive stolen data to cloud storage, before encrypting the target system. Reported targets included LaSalle County, and the city of Novi Sad. The FBI warned January 2021, in Private Industry Notification 20210106–001, of extortion activity using Egregor ransomware and rclone. Organisations worldwide had been threatened with public release of exfiltrated data. In some cases rclone had been disguised under the name svchost. Bookseller Barnes & Noble, US retailer Kmart, games developer Ubisoft and the Vancouver metro system have been reported as victims. An April 2021, cybersecurity investigation into SonicWall VPN zero-day vulnerability SNWLID-2021-0001 by FireEye's Mandiant team established attackers UNC2447 used rclone for reconnaissance and exfiltration of victims' files. Cybersecurity and Infrastructure Security Agency Analysis Report AR21-126A confirmed this use of rclone in FiveHands ransomware attacks. A June 2021, Microsoft Security Intelligence Twitter post identified use of rclone in BazaCall cyber attacks. The attackers sent emails e

  Read more →
• 

  Semantic compression

  In natural language processing, semantic compression is a process of compacting a lexicon used to build a textual document (or a set of documents) by reducing language heterogeneity, while maintaining text semantics. As a result, the same ideas can be represented using a smaller set of words. In most applications, semantic compression is a lossy compression. Increased prolixity does not compensate for the lexical compression and an original document cannot be reconstructed in a reverse process. == By generalization == Semantic compression is basically achieved in two steps, using frequency dictionaries and semantic network: determining cumulated term frequencies to identify target lexicon, replacing less frequent terms with their hypernyms (generalization) from target lexicon. Step 1 requires assembling word frequencies and information on semantic relationships, specifically hyponymy. Moving upwards in word hierarchy, a cumulative concept frequency is calculating by adding a sum of hyponyms' frequencies to frequency of their hypernym: c u m f ( k i ) = f ( k i ) + ∑ j c u m f ( k j ) {\displaystyle cumf(k_{i})=f(k_{i})+\sum _{j}cumf(k_{j})} where k i {\displaystyle k_{i}} is a hypernym of k j {\displaystyle k_{j}} . Then a desired number of words with top cumulated frequencies are chosen to build a target lexicon. In the second step, compression mapping rules are defined for the remaining words in order to handle every occurrence of a less frequent hyponym as its hypernym in output text. Example The below fragment of text has been processed by the semantic compression. Words in bold have been replaced by their hypernyms. They are both nest building social insects, but paper wasps and honey bees organize their colonies in very different ways. In a new study, researchers report that despite their differences, these insects rely on the same network of genes to guide their social behavior.The study appears in the Proceedings of the Royal Society B: Biological Sciences. Honey bees and paper wasps are separated by more than 100 million years of evolution, and there are striking differences in how they divvy up the work of maintaining a colony. The procedure outputs the following text: They are both facility building insect, but insects and honey insects arrange their biological groups in very different structure. In a new study, researchers report that despite their difference of opinions, these insects act the same network of genes to steer their party demeanor. The study appears in the proceeding of the institution bacteria Biological Sciences. Honey insects and insect are separated by more than hundred million years of organic processes, and there are impinging differences of opinions in how they divvy up the work of affirming a biological group. == Implicit semantic compression == A natural tendency to keep natural language expressions concise can be perceived as a form of implicit semantic compression, by omitting unmeaningful words or redundant meaningful words (especially to avoid pleonasms). == Applications and advantages == In the vector space model, compacting a lexicon leads to a reduction of dimensionality, which results in less computational complexity and a positive influence on efficiency. Semantic compression is advantageous in information retrieval tasks, improving their effectiveness (in terms of both precision and recall). This is due to more precise descriptors (reduced effect of language diversity – limited language redundancy, a step towards a controlled dictionary). As in the example above, it is possible to display the output as natural text (re-applying inflexion, adding stop words).

  Read more →
• 

  Cygwin

  Cygwin ( SIG-win) is a free and open-source Unix-like environment and command-line interface (CLI) for Microsoft Windows. The project also provides a software repository containing open-source packages. Cygwin allows source code for Unix-like operating systems to be compiled and run on Windows. Cygwin provides native integration of Windows-based applications. The terminal emulator mintty is the default command-line interface provided to interact with the environment. The Cygwin installation directory layout mimics the root file system of Unix-like systems, with directories such as /bin, /home, /etc, /usr, and /var. Cygwin is released under the GNU Lesser General Public License version 3. It was originally developed by Cygnus Solutions, which was later acquired by Red Hat (now part of IBM), to port the GNU toolchain to Win32, including the GNU Compiler Suite. Rather than rewrite the tools to use the Win32 runtime environment, Cygwin implemented a POSIX-compatible environment in the form of a DLL. The brand motto is "Get that Linux feeling – on Windows", although Cygwin doesn't have Linux in it. == History == Cygwin began in 1995 as a project of Steve Chamberlain, a Cygnus engineer who observed that Windows NT and 95 used COFF as their object file format, and that GNU already included support for x86 and COFF, and the C library newlib. He thought that it would be possible to retarget GCC and produce a cross compiler generating executables that could run on Windows. A prototype was later developed. Chamberlain bootstrapped the compiler on a Windows system, to emulate Unix to let the GNU configure shell script run. Initially, Cygwin was called Cygwin32. When Microsoft registered the trademark Win32, the "32" was dropped to simply become Cygwin. In 1999, Cygnus offered Cygwin 1.0 as a commercial product. Subsequent versions have not been released, instead relying on continued open source releases. Geoffrey Noer was the project lead from 1996 to 1999. Christopher Faylor was lead from 1999 to 2004; he left Red Hat and became co-lead with Corinna Vinschen. Corinna Vinschen has been the project lead from mid-2014 to date (as of September, 2024). From June 23, 2016, the Cygwin library version 2.5.2 was licensed under the GNU Lesser General Public License (LGPL) version 3. == Description == Cygwin is provided in two versions: the full 64-bit version and a stripped-down 32-bit version, whose final version was released in 2022. Cygwin consists of a library that implements the POSIX system call API in terms of Windows system calls to enable the running of a large number of application programs equivalent to those on Unix systems, and a GNU development toolchain (including GCC and GDB). Programmers have ported the X Window System, K Desktop Environment 3, GNOME, Apache, and TeX. Cygwin permits installing inetd, syslogd, sshd, Apache, and other daemons as standard Windows services. Cygwin programs have full access to the Windows API and other Windows libraries. Cygwin programs are installed by running Cygwin's "setup" program, which downloads them from repositories on the Internet. The Cygwin API library is licensed under the GNU Lesser General Public License version 3 (or later), with an exception to allow linking to any free and open-source software whose license conforms to the Open Source Definition. Cygwin consists of two parts: A dynamic-link library in the form of a C standard library that acts as a compatibility layer for the POSIX API and A collection of software tools and applications that provide a Unix-like look and feel. Cygwin supports POSIX symbolic links, representing them as plain-text files with the system attribute set. Cygwin 1.5 represented them as Windows Explorer shortcuts, but this was changed for reasons of performance and POSIX correctness. Cygwin also recognises NTFS junction points and symbolic links and treats them as POSIX symbolic links, but it does not create them. The POSIX API for handling access control lists (ACLs) is supported. === Technical details === A Cygwin-specific version of the Unix mount command allows mounting Windows paths as "filesystems" in the Unix file space. Initial mount points can be configured in /etc/fstab, which has a format very similar to Unix systems, except that Windows paths appear in place of devices. Filesystems can be mounted in binary mode (by default), or in text mode, which enables automatic conversion between LF and CRLF endings (which only affects programs that open files without explicitly specifying text or binary mode). Cygwin 1.7 introduced comprehensive support for POSIX locales, and the UTF-8 Unicode encoding became the default. The fork system call for duplicating a process is fully implemented, but the copy-on-write optimization strategy could not be used. Cygwin's default user interface is the bash shell running in the mintty terminal emulator. The DLL also implements pseudo terminal (pty) devices, and Cygwin ships with a number of terminal emulators that are based on them, including rxvt/urxvt and xterm. The version of GCC that comes with Cygwin has various extensions for creating Windows DLLs, such as specifying whether a program is a windowing or console-mode program. Support for compiling programs that do not require the POSIX compatibility layer provided by the Cygwin DLL used to be included in the default GCC, but as of 2014, it is provided by cross-compilers contributed by the MinGW-w64 project. == Software packages == Cygwin's base package selection is approximately 100MB, containing the bash (interactive user) and dash (installation) shells and the core file and text manipulation utilities. Additional packages are available as optional installs from within the Cygwin "setup" program and package manager ("setup-x86_64.exe" – 64 bit). The Cygwin Ports project provided additional packages that were not available in the Cygwin distribution itself. Examples included GNOME, K Desktop Environment 3, MySQL database, and the PHP scripting language. Most ports have been adopted by volunteer maintainers as Cygwin packages, and Cygwin Ports are no longer maintained. Cygwin ships with GTK+ and Qt. The Cygwin/X project allows graphical Unix programs to display their user interfaces on the Windows desktop for both local and remote programs.

  Read more →
• 

  OpenFog Consortium

  The OpenFog Consortium (sometimes stylized as Open Fog Consortium) was a consortium of high tech industry companies and academic institutions across the world aimed at the standardization and promotion of fog computing in various capacities and fields. The consortium was founded by Cisco Systems, Intel, Microsoft, Princeton University, Dell, and ARM Holdings in 2015 and now has 57 members across the North America, Asia, and Europe, including Forbes 500 companies and noteworthy academic institutions. The OpenFog consortium merged with the Industrial Internet Consortium, now the Industry IoT Consortium, on January 31, 2019. == History == OpenFog was created on November 19, 2015, by ARM Holdings, Cisco Systems, Dell, Intel, Microsoft, and Princeton University. The idea for a consortium centered on the advancement and dissemination of fog computing was thought up by Helder Antunes, a Cisco executive with a history in IoT, Mung Chiang, then a Princeton University professor and now President of Purdue University, and Dr. Tao Zhang, a Cisco Distinguished Engineer and CIO for the IEEE Communications Society then and now a manager at the National Institute of Standards and Technologies (NIST). The project was executed from concept to launch by Armando Pereira at PVentures Consulting, a Silicon Valley–based high-tech consulting firm. OpenFog released its reference architecture for fog computing on February 13, 2017. The Fog World Congress 2017, with Dr. Tao Zhang as its General Chair, was hosted in October 2017 by OpenFog, in conjunction with the IEEE Communications Society, as the first congress devoted to fog computing. == Administration == The OpenFog Consortium was governed by its board of directors, which is chaired by Cisco Senior Director Helder Antunes. The board of directors is made up of 11 seats, each representing one of the following companies and institutions: ARM, AT&T, Cisco, Dell, Intel, Microsoft, Princeton University, IEEE, GE, ZTE and Shanghai Tech University. The consortium's general membership comprised 13 academic members: Aalto University, Arizona State University, California Institute of Technology, Georgia State University, National Chiao Tung University, National Taiwan University, Shanghai Research Centre for Wireless Communication, Chinese University of Hong Kong, University of Colorado Boulder, University of Southern California, University of Pisa, Vanderbilt University, Wayne State University, and 20 additional members: Hitachi, Internet Initiative Japan, Itochu, Kii, Nebbiolo, PrismTech, NEC, NGD Systems, NTT Communications, OSIsoft, Real-time Innovations, relayr, Sakura Internet, Stichting imec Nederland, Toshiba, TTT Tech, Fujitsu, FogHorn Systems, TTTech and MARSEC. == Published work == The OpenFog Consortium published the white paper, "OpenFog Reference Architecture". This document outlines the eight pillars of an OpenFog architecture:Security; Scalability; Open; Autonomy; Programmability; RAS (reliability, availability and serviceability); Agility; and Hierarchy. It also incorporates a glossary for fog computing terms. In July 2018, the IEEE Standards Association announced it had adopted the OpenFog Reference Architecture as the first standard for fog computing.

  Read more →
• 

  XLeratorDB

  XLeratorDB is a suite of database function libraries that enable Microsoft SQL Server to perform a wide range of additional (non-native) business intelligence and ad hoc analytics. The libraries, which are embedded and run centrally on the database, include more than 450 individual functions similar to those found in Microsoft Excel spreadsheets. The individual functions are grouped and sold as six separate libraries based on usage: finance, statistics, math, engineering, unit conversions and strings. WestClinTech, the company that developed XLeratorDB, claims it is "the first commercial function package add-in for Microsoft SQL Server." == Company history == WestClinTech (LLC), founded by software industry veterans Charles Flock and Joe Stampf in 2008, is located in Irvington, New York, United States. Flock was a co-founder of The Frustum Group, developer of the OPICS enterprise banking and trading platform, which was acquired by London-based Misys, PLC in 1996. Stampf joined Frustum in 1994 and with Flock remained active with the company after acquisition, helping to develop successive generations of OPICS now employed by over 150 leading financial institutions worldwide. Following a full year of research, development and testing, WestClinTech introduced and recorded its first commercial sale of XLeratorDB in April 2009. In September 2009, XLeratorDB became available to all Federal agencies through NASA's Strategic Enterprise-Wide Procurement (SEWP-IV) program, a government-wide acquisition contract. == Technology == XLeratorDB uses Microsoft SQL CLR(Common Language Runtime) technology. SQL CLR allows managed code to be hosted by, and run in, the Microsoft SQL Server environment. SQL CLR relies on the creation, deployment and registration of .NET Framework assemblies that are physically stored in managed code dynamic-link libraries (DLL). The assemblies may contain .NET namespaces, classes, functions, and properties. Because managed code compiles to native code prior to execution, functions using SQL CLR can achieve significant performance increases versus the equivalent functions written in T-SQL in some scenarios. XLeratorDB requires Microsoft SQL Server 2005 or SQL Server 2005 Express editions, or later (compatibility mode 90 or higher). The product installs with PERMISSION_SET=SAFE. SAFE mode, the most restrictive permission set, is accessible by all users. Code executed by an assembly with SAFE permissions cannot access external system resources such as files, the network, the internet, environment variables, or the registry. == Functions == In computer science, a function is a portion of code within a larger program which performs a specific task and is relatively independent of the remaining code. As used in database and spreadsheet applications these functions generally represent mathematical formulas widely used across a variety of fields. While this code may be user-generated, it is also embedded as a pre-written sub-routine in applications. These functions are typically identified by common nomenclature which corresponds to their underlying operations: e.g. IRR identifies the function which calculates Internal Rate of Return on a series of periodic cash flows. === Function uses === As subroutines, functions can be integrated and used in a variety of ways, and as part of larger, more complicated applications. Within large enterprise applications they may, for example, play an important role in defining business rules or risk management parameters, while remaining virtually invisible to end users. Within database management systems and spreadsheets, however, these kinds of functions also represent discrete sets of tools; they can be accessed directly and utilized on a stand-alone basis, or in more complex, user-defined configurations. In this context, functions can be used for business intelligence and ad hoc analysis of data in fields such as finance, statistics, engineering, math, etc. === Function types === XLeratorDB uses three kinds of functions to perform analytic operations: scalar, aggregate, and a hybrid form which WestClinTech calls Range Queries. Scalar functions take a single value, perform an operation and return a single value. An example of this type of function is LOG, which returns the logarithm of a number to a specified base. Aggregate functions operate on a series of values but return a single, summarizing value. An example of this type of function is AVG, which returns the average of values in a specified group. In XLeratorDB there are some functions which have characteristics of aggregate functions (operating on multiple series of values) but cannot be processed in SQL CLR using single column inputs, such as AVG does. For example, irregular internal rate of return (XIRR), a financial function, operates on a collection of cash flow values from one column, but must also apply variable period lengths from another column and an initial iterative assumption from a third, in order to return a single, summarizing value. WestClinTech documentation notes that Range Queries specify the data to be included in the result set of the function independently of the WHERE clause associated with the T-SQL statement, by incorporating a SELECT statement into the function as a string argument; the function then traps that SELECT statement, executes it internally and processes the result. Some XLeratorDB functions that employ Range Queries are: NPV, XNPV, IRR, XIRR, MIRR, MULTINOMIAL, and SERIESSUM. Within the application these functions are identified by a "_q" naming convention: e.g. NPV_q, IRR_q, etc. == Analytic functions == === SQL Server functions === Microsoft SQL Server is the #3 selling database management system (DBMS), behind Oracle and IBM. (While versions of SQL Server have been on the market since 1987, XLeratorDB is compatible with only the 2005 edition and later.) Like all major DBMS, SQL Server performs a variety of data mining operations by returning or arraying data in different views (also known as drill-down). In addition, SQL Server uses Transact-SQL (T-SQL) to execute four major classes of pre-defined functions in native mode. Functions operating on the DBMS offer several advantages over client layer applications like Excel: they utilize the most up-to-date data available; they can process far larger quantities of data; and, the data is not subject to exporting and transcription errors. SQL Server 2008 includes a total of 58 functions that perform relatively basic aggregation (12), math (23) and string manipulation (23) operations useful for analytics; it includes no native functions that perform more complex operations directly related to finance, statistics or engineering. === Excel functions === Microsoft Excel, a component of Microsoft Office suite, is one of the most widely used spreadsheet applications on the market today. In addition to its inherent utility as a stand-alone desktop application, Excel overlaps and complements the functionality of DBMS in several ways: storing and arraying data in rows and columns; performing certain basic tasks such as pivot table and aggregating values; and facilitating sharing, importing and exporting of database data. Excel's chief limitation relative to a true database is capacity; Excel 2003 is limited to some 65k rows and 256 columns; Excel 2007 extends this capacity to roughly 1million rows and 16k columns. By comparison, SQL Server is able to manage over 500k terabytes of memory. Excel offers, however, an extensive library of specialized pre-written functions which are useful for performing ad hoc analysis on database data. Excel 2007 includes over 300 of these pre-defined functions, although customized functions can also be created by users, or imported from third party developers as add-ons. Excel functions are grouped by type: === Excel business intelligence functions === Operating on the client computing layer Excel plays an important role as a business intelligence tool because it: performs a wide array of complex analytic functions not native to most DBMS software offers far greater ad hoc reporting and analytic flexibility than most enterprise software provides a medium for sharing and collaborating because of its ubiquity throughout the enterprise Microsoft reinforces this positioning with Business Intelligence documentation that positions Excel in a clearly pivotal role. === XLeratorDB vs. Excel functions === While operating within the database environment, XLeratorDB functions utilize the same naming conventions and input formats, and in most cases, return the same calculation results as Excel functions. XLeratorDB, coupled with SQL Server's native capabilities, compares to Excel's function sets as follows:

  Read more →
• 

  Machine translation software usability

  The sections below give objective criteria for evaluating the usability of machine translation software output. == Stationarity or canonical form == Do repeated translations converge on a single expression in both languages? I.e. does the translation method show stationarity or produce a canonical form? Does the translation become stationary without losing the original meaning? This metric has been criticized as not being well correlated with BLEU (BiLingual Evaluation Understudy) scores. == Adaptive to colloquialism, argot or slang == Is the system adaptive to colloquialism, argot or slang? The French language has many rules for creating words in the speech and writing of popular culture. Two such rules are: (a) The reverse spelling of words such as femme to meuf. (This is called verlan.) (b) The attachment of the suffix -ard to a noun or verb to form a proper noun. For example, the noun faluche means "student hat". The word faluchard formed from faluche colloquially can mean, depending on context, "a group of students", "a gathering of students" and "behavior typical of a student". The Google translator as of 28 December 2006 doesn't derive the constructed words as for example from rule (b), as shown here: Il y a une chorale falucharde mercredi, venez nombreux, les faluchards chantent des paillardes! ==> There is a choral society falucharde Wednesday, come many, the faluchards sing loose-living women! French argot has three levels of usage: familier or friendly, acceptable among friends, family and peers but not at work grossier or swear words, acceptable among friends and peers but not at work or in family verlan or ghetto slang, acceptable among lower classes but not among middle or upper classes The United States National Institute of Standards and Technology conducts annual evaluations [1] Archived 2009-03-22 at the Wayback Machine of machine translation systems based on the BLEU-4 criterion [2]. A combined method called IQmt which incorporates BLEU and additional metrics NIST, GTM, ROUGE and METEOR has been implemented by Gimenez and Amigo [3]. == Well-formed output == Is the output grammatical or well-formed in the target language? Using an interlingua should be helpful in this regard, because with a fixed interlingua one should be able to write a grammatical mapping to the target language from the interlingua. Consider the following Arabic language input and English language translation result from the Google translator as of 27 December 2006 [4]. This Google translator output doesn't parse using a reasonable English grammar: وعن حوادث التدافع عند شعيرة رمي الجمرات -التي كثيرا ما يسقط فيها العديد من الضحايا- أشار الأمير نايف إلى إدخال "تحسينات كثيرة في جسر الجمرات ستمنع بإذن الله حدوث أي تزاحم". ==> And incidents at the push Carbuncles-throwing ritual, which often fall where many of the victims - Prince Nayef pointed to the introduction of "many improvements in bridge Carbuncles God would stop the occurrence of any competing." == Semantics preservation == Do repeated re-translations preserve the semantics of the original sentence? For example, consider the following English input passed multiple times into and out of French using the Google translator as of 27 December 2006: Better a day earlier than a day late. ==> Améliorer un jour plus tôt qu'un jour tard. ==> To improve one day earlier than a day late. ==> Pour améliorer un jour plus tôt qu'un jour tard. ==> To improve one day earlier than a day late. As noted above and in, this kind of round-trip translation is a very unreliable method of evaluation. == Trustworthiness and security == An interesting peculiarity of Google Translate as of 24 January 2008 (corrected as of 25 January 2008) is the following result when translating from English to Spanish, which shows an embedded joke in the English-Spanish dictionary which has some added poignancy given recent events: Heath Ledger is dead ==> Tom Cruise está muerto This raises the issue of trustworthiness when relying on a machine translation system embedded in a Life-critical system in which the translation system has input to a Safety Critical Decision Making process. Conjointly it raises the issue of whether in a given use the software of the machine translation system is safe from hackers. It is not known whether this feature of Google Translate was the result of a joke/hack or perhaps an unintended consequence of the use of a method such as statistical machine translation. Reporters from CNET Networks asked Google for an explanation on January 24, 2008; Google said only that it was an "internal issue with Google Translate". The mistranslation was the subject of much hilarity and speculation on the Internet. If it is an unintended consequence of the use of a method such as statistical machine translation, and not a joke/hack, then this event is a demonstration of a potential source of critical unreliability in the statistical machine translation method. In human translations, in particular on the part of interpreters, selectivity on the part of the translator in performing a translation is often commented on when one of the two parties being served by the interpreter knows both languages. This leads to the issue of whether a particular translation could be considered verifiable. In this case, a converging round-trip translation would be a kind of verification.

  Read more →
• 

  ReactiveX

  ReactiveX (Rx, also known as Reactive Extensions) is a software library originally created by Microsoft that allows imperative programming languages to operate on sequences of data regardless of whether the data is synchronous or asynchronous. It provides a set of sequence operators that operate on each item in the sequence. It is an implementation of reactive programming and provides a blueprint for the tools to be implemented in multiple programming languages. == Overview == ReactiveX is an API for asynchronous programming with observable streams. Asynchronous programming allows programmers to call functions and then have the functions "callback" when they are done, usually by giving the function the address of another function to execute when it is done. Programs designed in this way often avoid the overhead of having many threads constantly starting and stopping. Observable streams (i.e. streams that can be observed) in the context of Reactive Extensions are like event emitters that emit three events: next, error, and complete. An observable emits next events until it either emits an error event or a complete event. However, at that point it will not emit any more events, unless it is subscribed to again. The examples below use the RxJS implementation of Reactive Extensions for the JavaScript programming language. === Motivation === For sequences of data, it combines the advantages of iterators with the flexibility of event-based asynchronous programming. It also works as a simple promise, eliminating the pyramid of doom that results from multiple layers of callbacks. === Observables and observers === ReactiveX is a combination of ideas from the observer and the iterator patterns and from functional programming. An observer subscribes to an observable sequence. The sequence then sends the items to the observer one at a time, usually by calling the provided callback function. The observer handles each one before processing the next one. If many events come in asynchronously, they must be stored in a queue or dropped. In ReactiveX, an observer will never be called with an item out of order or (in a multi-threaded context) called before the callback has returned for the previous item. Asynchronous calls remain asynchronous and may be handled by returning an observable. It is similar to the iterators pattern in that if a fatal error occurs, it notifies the observer separately (by calling a second function). When all the items have been sent, it completes (and notifies the observer by calling a third function). The Reactive Extensions API also borrows many of its operators from iterator operators in other programming languages. Reactive Extensions is different from functional reactive programming as the Introduction to Reactive Extensions explains: It is sometimes called "functional reactive programming" but this is a misnomer. ReactiveX may be functional, and it may be reactive, but "functional reactive programming" is a different animal. One main point of difference is that functional reactive programming operates on values that change continuously over time, while ReactiveX operates on discrete values that are emitted over time. (See Conal Elliott's work for more-precise information on functional reactive programming.) === Reactive operators === An operator is a function that takes one observable (the source) as its first argument and returns another observable (the destination, or outer observable). Then for every item that the source observable emits, it will apply a function to that item, and then emit it on the destination Observable. It can even emit another Observable on the destination observable. This is called an inner observable. An operator that emits inner observables can be followed by another operator that in some way combines the items emitted by all the inner observables and emits the item on its outer observable. Examples include: switchAll – subscribes to each new inner observable as soon as it is emitted and unsubscribes from the previous one. mergeAll – subscribes to all inner observables as they are emitted and outputs their values in whatever order it receives them. concatAll – subscribes to each inner observable in order and waits for it to complete before subscribing to the next observable. Operators can be chained together to create complex data flows that filter events based on certain criteria. Multiple operators can be applied to the same observable. Some of the operators that can be used in Reactive Extensions may be familiar to programmers who use functional programming language, such as map, reduce, group, and zip. There are many other operators available in Reactive Extensions, though the operators available in a particular implementation for a programming language may vary. ==== Reactive operator examples ==== Here is an example of using the map and reduce operators. We create an observable from a list of numbers. The map operator will then multiply each number by two and return an observable. The reduce operator will then sum up all the numbers provided to it (the value of 0 is the starting point). Calling subscribe will register an observer that will observe the values from the observable produced by the chain of operators. With the subscribe method, we are able to pass in an error-handling function, called whenever an error is emitted in the observable, and a completion function when the observable has finished emitting items. ==== Usage in stream-oriented programming ==== Certain RxJS primitives such as BehaviorSubject make it possible to create pure stateful streams to track application state of arbitrary complexity in simple terms. The button below will feed an event to the stream, which in turn will re-emit the next natural number every time, back into the tag that follows and displays the count of clicks detected. Libraries such as Rimmel.js, designed around RxJS Observables, enable integration between reactive streams and the HTML DOM: == History == Reactive Extensions was created by the Cloud Programmability Team at Microsoft around 2011, as a byproduct of a larger effort called Volta. It was originally intended to provide an abstraction for events across different tiers in an application to support tier splitting in Volta. The project's logo represents an electric eel, which is a reference to Volta. The extensions suffix in the name is a reference to the Parallel Extensions technology which was invented around the same time; the two are considered complementary. The initial implementation of Rx was for .NET Framework and was released on June 21, 2011. Later, the team started the implementation of Rx for other platforms, including JavaScript and C++. The technology was released as open source in late 2012, initially on CodePlex. Later, the code moved to GitHub and has been ported to several other languages, including Go, Java, Kotlin, PHP and Rust.

  Read more →
• 

  Webmail

  Webmail (or web-based email) is an email service that can be accessed using a standard web browser. It contrasts with email service accessible through a specialised email client software. Additionally, many internet service providers (ISP) provide webmail as part of their internet service package. Similarly, some web hosting providers also provide webmail as a part of their hosting package. As with any web application, webmail's main advantage over the use of a desktop email client is the ability to send and receive email anywhere from a web browser. == History == === Early implementations === The first Web Mail implementation was developed at CERN in 1993 by Phillip Hallam-Baker as a test of the HTTP protocol stack, but was not developed further. In the next two years, however, several people produced working webmail applications. In Europe, there were three implementations, Søren Vejrum's "WWW Mail", Luca Manunza's "WebMail", and Remy Wetzels' "WebMail". Søren Vejrum's "WWW Mail" was written when he was studying and working at the Copenhagen Business School in Denmark, and was released on February 28, 1995. Luca Manunza's "WebMail" was written while he was working at CRS4 in Sardinia, from an idea of Gianluigi Zanetti, with the first source release on March 30, 1995. Remy Wetzels' "WebMail" was written while he was studying at the Eindhoven University of Technology in the Netherlands for the DSE and was released early January 1995. In the United States, Matt Mankins wrote "Webex", and Bill Fitler, while at Lotus cc:Mail, began working on an implementation which he demonstrated publicly at Lotusphere on January 24, 1995. Customers who saw the cc:Mail demonstration were very enthusiastic, one recalling that they were "like an angry mob. People were yelling, 'We want this now!'". Matt Mankins, under the supervision of Dr. Burt Rosenberg at the University of Miami, released his "Webex" application source code in a post to comp.mail.misc on August 8, 1995, although it had been in use as the primary email application at the School of Architecture where Mankins worked for some months prior. Bill Fitler's webmail implementation was further developed as a commercial product, which Lotus announced and released in the fall of 1995 as cc:Mail for the World Wide Web 1.0; thereby providing an alternative means of accessing a cc:Mail message store (the usual means being a cc:Mail desktop application that operated either via dialup or within the confines of a local area network). Early commercialization of webmail was also achieved when "Webex" began to be sold by Mankins' company, DotShop, Inc., at the end of 1995. Within DotShop, "Webex" changed its name to "EMUmail"; which would be sold to companies like UPS and Rackspace until its sale to Accurev in 2001. EMUmail was one of the first applications to feature a free version that included embedded advertising, as well as a licensed version that did not. Hotmail and Four11's RocketMail both launched in 1996 as free services and immediately became very popular. === Widespread deployment === As the 1990s progressed, and into the 2000s, it became more common for the general public to have access to webmail because: many Internet service providers (such as EarthLink) and web hosting providers (such as Verio) began bundling webmail into their service offerings (often in parallel with POP/SMTP services); many other enterprises (such as universities and large corporations) also started offering webmail as a way for their user communities to access their email (either locally managed or outsourced); webmail service providers (such as Hotmail and RocketMail) emerged in 1996 as a free service to the general public, and rapidly gained in popularity. In some cases, webmail application software is developed in-house by the organizations running and managing the application, and in some cases it is obtained from software companies that develop and sell such applications, usually as part of an integrated mail server package (an early example being Netscape Messaging Server). The market for webmail application software has continued into the 2010s. == Rendering and compatibility == Email users may find the use of both a webmail client and a desktop client using the POP3 protocol presents some difficulties. For example, email messages that are downloaded by the desktop client and are removed from the server will no longer be available on the webmail client. The user is limited to previewing messages using the web client before they are downloaded by the desktop email client. However, one may choose to leave the emails on the server, in which case this problem does not occur. The use of both a webmail client and a desktop client using the IMAP4 protocol allows the contents of the mailbox to be consistently displayed in both the webmail and desktop clients and any action the user performs on messages in one interface will be reflected when the email is accessed via the other interface. There are significant differences in rendering capabilities for many popular webmail services such as Gmail, Outlook.com and Yahoo! Mail. Due to the varying treatment of HTML tags, such as