AI Headshot Magisk Module

AI Headshot Magisk Module — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

XLNet

The XLNet was an autoregressive Transformer designed as an improvement over BERT, with 340M parameters and trained on 33 billion words. It was released on 19 June 2019, under the Apache 2.0 license. It achieved state-of-the-art results on a variety of natural language processing tasks, including language modeling, question answering, and natural language inference. == Architecture == The main idea of XLNet is to model language autoregressively like the GPT models, but allow for all possible permutations of a sentence. Concretely, consider the following sentence:My dog is cute.In standard autoregressive language modeling, the model would be tasked with predicting the probability of each word, conditioned on the previous words as its context: We factorize the joint probability of a sequence of words x 1 , … , x T {\displaystyle x_{1},\ldots ,x_{T}} using the chain rule: Pr ( x 1 , … , x T ) = Pr ( x 1 ) Pr ( x 2 | x 1 ) Pr ( x 3 | x 1 , x 2 ) … Pr ( x T | x 1 , … , x T − 1 ) . {\displaystyle \Pr(x_{1},\ldots ,x_{T})=\Pr(x_{1})\Pr(x_{2}|x_{1})\Pr(x_{3}|x_{1},x_{2})\ldots \Pr(x_{T}|x_{1},\ldots ,x_{T-1}).} For example, the sentence "My dog is cute" is factorized as: Pr ( My , dog , is , cute ) = Pr ( My ) Pr ( dog | My ) Pr ( is | My , dog ) Pr ( cute | My , dog , is ) . {\displaystyle \Pr({\text{My}},{\text{dog}},{\text{is}},{\text{cute}})=\Pr({\text{My}})\Pr({\text{dog}}|{\text{My}})\Pr({\text{is}}|{\text{My}},{\text{dog}})\Pr({\text{cute}}|{\text{My}},{\text{dog}},{\text{is}}).} Schematically, we can write it as → My → My dog → My dog is → My dog is cute . {\displaystyle {\texttt {}}{\texttt {}}{\texttt {}}{\texttt {}}\to {\text{My }}{\texttt {}}{\texttt {}}{\texttt {}}\to {\text{My dog }}{\texttt {}}{\texttt {}}\to {\text{My dog is }}{\texttt {}}\to {\text{My dog is cute}}.} However, for XLNet, the model is required to predict the words in a randomly generated order. Suppose we have sampled a randomly generated order 3241, then schematically, the model is required to perform the following prediction task: → is → dog is → dog is cute → My dog is cute {\displaystyle {\texttt {}}{\texttt {}}{\texttt {}}{\texttt {}}\to {\texttt {}}{\texttt {}}{\text{is }}{\texttt {}}\to {\texttt {}}{\text{dog is }}{\texttt {}}\to {\texttt {}}{\text{dog is cute}}\to {\text{My dog is cute}}} By considering all permutations, XLNet is able to capture longer-range dependencies and better model the bidirectional context of words. === Two-Stream Self-Attention === To implement permutation language modeling, XLNet uses a two-stream self-attention mechanism. The two streams are: Content stream: This stream encodes the content of each word, as in standard causally masked self-attention. Query stream: This stream encodes the content of each word in the context of what has gone before. In more detail, it is a masked cross-attention mechanism, where the queries are from the query stream, and the key-value pairs are from the content stream. The content stream uses the causal mask M causal = [ 0 − ∞ − ∞ … − ∞ 0 0 − ∞ … − ∞ 0 0 0 … − ∞ ⋮ ⋮ ⋮ ⋱ ⋮ 0 0 0 … 0 ] {\displaystyle M_{\text{causal}}={\begin{bmatrix}0&-\infty &-\infty &\dots &-\infty \\0&0&-\infty &\dots &-\infty \\0&0&0&\dots &-\infty \\\vdots &\vdots &\vdots &\ddots &\vdots \\0&0&0&\dots &0\end{bmatrix}}} permuted by a random permutation matrix to P M causal P − 1 {\displaystyle PM_{\text{causal}}P^{-1}} . The query stream uses the cross-attention mask P ( M causal − ∞ I ) P − 1 {\displaystyle P(M_{\text{causal}}-\infty I)P^{-1}} , where the diagonal is subtracted away specifically to avoid the model "cheating" by looking at the content stream for what the current masked token is. Like the causal masking for GPT models, this two-stream masked architecture allows the model to train on all tokens in one forward pass. == Training == Two models were released: XLNet-Large, cased: 110M parameters, 24-layer, 1024-hidden, 16-heads XLNet-Base, cased: 340M parameters, 12-layer, 768-hidden, 12-heads. It was trained on a dataset that amounted to 32.89 billion tokens after tokenization with SentencePiece. The dataset was composed of BooksCorpus, and English Wikipedia, Giga5, ClueWeb 2012-B, and Common Crawl. It was trained on 512 TPU v3 chips, for 5.5 days. At the end of training, it still under-fitted the data, meaning it could have achieved lower loss with more training. It took 0.5 million steps with an Adam optimizer, linear learning rate decay, and a batch size of 8192.
Read more →
Viber

Rakuten Viber, commonly known as Viber, is a cross-platform voice over IP (VoIP) and instant messaging (IM) software application owned by the Japanese technology company Rakuten Group. The service is available as freeware for Android, iOS, Microsoft Windows, macOS and Linux. Users are registered and identified through a mobile phone number, although the service can also be accessed on desktop platforms without mobile connectivity. In addition to instant messaging, the platform allows users to exchange media such as images, videos and files, and provides a paid international calling service called Viber Out. The software was launched in 2010 by the company Viber Media, founded by Talmon Marco and Igor Magazinnik. Rakuten acquired Viber Media in 2014 and later renamed the company Rakuten Viber. The company is headquartered in Cyprus and maintains offices in London, Manila, Paris, San Francisco, Singapore, Tokyo and Beijing. == History == === Founding (2010) === Viber Media was founded in Tel Aviv, Israel, in 2010 by Talmon Marco and Igor Magazinnik. Marco and Magazinnik are also co-founders of the peer-to-peer media and file-sharing client iMesh. The company was run from Israel and was registered in Cyprus. Sani Maroli and Ofer Smocha soon joined the company as well. Marco said Viber allows instant calling and synchronization with contacts because the ID is the user's cell number. In its early days, Viber relied on a patchwork of outsourcing partners from different countries, commissioning specific solutions from external vendors — including teams based in Cyprus and Belarus. According to the company's statements, development of Viber's core functionality historically originated from its Tel Aviv office — a testament to its roots — even though the legal entity was registered elsewhere. === Early monetisation (2011) === In its first two years of availability, Viber did not generate revenues. It began doing so in 2013, via user payments for Viber Out voice calling and the Viber graphical messaging "sticker market". The company was originally funded by individual investors, described by Marco as "friends and family". They invested $20 million in the company, which had 120 employees as of May 2013. On 24 July 2013, Viber's support system was defaced by the Syrian Electronic Army. According to Viber, no sensitive user information was accessed. By the time Rakuten came forward with its acquisition deal in 2014, Viber had already stopped working with external vendors, choosing instead to consolidate development under its own offices. === Rakuten acquires Viber (2014) === On 13 February 2014, Rakuten announced they had acquired Viber Media for $900 million, and since then Viber has been owned by Rakuten, Inc., an e-commerce conglomerate headquartered in Tokyo. The sale of Viber earned the Shabtai family (Benny, his brother Gilad, and Gilad's son Ofer) some $500 million from their 55.2% stake in the company. At that sale price, the founders each realized over 30 times return on their investments. Later that year, the company established a UK presence with the incorporation of Viber UK Limited in London. Djamel Agaoua became Viber Media CEO in February 2017, replacing co-founder Marco who left in 2015. In July 2017 the corporate name of Viber Media was changed to Rakuten Viber and a new wordmark logo was introduced. Its legal name remains Viber Media, S.à r.l. based in Luxembourg. === Post-acquisition === In August 2015 Viber opened a regional office for Central and Eastern Europe in Sofia to support growth in the region. In 2017, Rakuten Viber and the World Wildlife Fund engaged in a commercial transaction aimed at raising awareness and protecting wildlife. After first using Viber to spread its message in June 2020, the International Federation of the Red Cross launched an official chatbot and community on the messaging app to combat the spread of false information, which they termed an infodemic, about COVID-19. The chatbot is still active as of June 2022, with over 1.4 million subscribers. In 2020, Rakuten Viber and the World Health Organization (the WHO) engaged in a commercial transaction for a chatbot to inform users of issues such as women's health. and an anti-smoking campaign. In the wake of the July–August 2020 Belarusian election protests, to avoid sanctions and harassment from monopolies the company closed its office in Minsk. In 2022, Ofir Eyal became Viber CEO, replacing Djamel Agaoua. Eyal is a Viber veteran; he worked as Vice President of Product in 2014 before his promotion to Chief Operating Officer in 2019. Shortly after the appointment of a new CEO, Viber continued its international expansion. In March 2022, Rakuten announced the opening of a development center in Tbilisi, Georgia, intended to support work on mobile applications and technology projects in the region. In July 2022, Rakuten Viber partnered with Rapyd to launch instant cross-border P2P payments. The company launched payments on the Viber app first in Greece and Germany, and then in other countries. In August, Mineski teamed up with Viber to develop a social minigame platform that can play off Viber's application. In May 2022, Rakuten Viber launched the premium chat service Viber Plus that offers exclusive features, including sticker market privileges, ad-free use, priority Viber support, exclusive badge, unique Viber icon, large file sharing, and more. In 2022, Viber joined the European Union’s Code of Conduct on countering illegal hate speech online. As part of this framework, the company undertook to review reported content and remove material identified as hate speech in accordance with the Code and its platform rules. In January 2024 Rakuten (the company behind Viber) established an office in Kyiv to bring together engineering and marketing departments. Alongside launching its Kyiv office the company joined Diia.City as a resident. Subsequently in October 2024 Rakuten Viber inaugurated an office in Manila to broaden its operations, in the Philippines. The company’s legal entity remains Viber Media S.à r.l., registered in Luxembourg. Viber’s engineering work has been carried out across multiple countries and through external partners, including outsourcing and near-shore vendors. As a result, its development operations are distributed internationally rather than concentrated in a single location. In December 2024, Viber was blocked in Russia. Roskomnadzor announced the nationwide blocking of the messaging app due to non-compliance with local legal requirements. == Security audit == On 4 November 2014, Viber scored 1 out of 7 points on the Electronic Frontier Foundation's "Secure Messaging Scorecard". Viber received a point for encryption during transit but lost points because communications were not encrypted with keys that the provider did not have access to (i.e. the communications were not end-to-end encrypted), users could not verify contacts' identities, past messages were not secure if the encryption keys were stolen (i.e. the service did not provide forward secrecy), the code was not open to independent review (i.e. the code was not open-source), the security design was not properly documented, and there had not been a recent independent security audit. On 14 November 2014, the EFF changed Viber's score to 2 out of 7 after it had received an external security audit from Ernst & Young's Advanced Security Centre. On 19 April 2016, with the announcement of Viber version 6.0, Rakuten added end-to-end encryption to their service. The company said that the encryption protocol had only been audited internally, and promised to commission external audits "in the coming weeks". In May 2016, Viber published an overview of their encryption protocol, saying that it is a custom implementation that "uses the same concepts" as the Signal Protocol. In 2022, Rakuten Viber won a Security Award, by test.de, a tech firm based in Germany where there are over 3 million Viber users. In 2024, Rakuten Viber received SOC certification following an audit conducted by Ernst & Young. The certification relates to the company’s controls for data protection and information security. == Market share == As of December 2016, Viber had 800 million registered users. According to Statista, there are 260 million monthly active users as of January 2019. The Viber messenger is very popular in the Philippines, Greece, Eastern Europe, Russia, the Middle East, and some Asian markets. India was the largest market for Viber as of December 2014 with 33 million registered users, the fifth most popular instant messenger in the country. At the same time there were 30 million users in the United States, 28 million in Russia and 18 million in Brazil. Viber is particularly popular in Eastern Europe, being the most downloaded messaging app on Android in Belarus, Moldova and Ukraine as of 2016. It is also popular in Iraq, Libya and Nepal. Viber is translated in 44 languages and used in more than 190 co
Read more →
Undeniable signature

An undeniable signature is a digital signature scheme which allows the signer to be selective to whom they allow to verify signatures. The scheme adds explicit signature repudiation, preventing a signer later refusing to verify a signature by omission; a situation that would devalue the signature in the eyes of the verifier. It was invented by David Chaum and Hans van Antwerpen in 1989. == Overview == In this scheme, a signer possessing a private key can publish a signature of a message. However, the signature reveals nothing to a recipient/verifier of the message and signature without taking part in either of two interactive protocols: Confirmation protocol, which confirms that a candidate is a valid signature of the message issued by the signer, identified by the public key. Disavowal protocol, which confirms that a candidate is not a valid signature of the message issued by the signer. The motivation for the scheme is to allow the signer to choose to whom signatures are verified. However, that the signer might claim the signature is invalid at any later point, by refusing to take part in verification, would devalue signatures to verifiers. The disavowal protocol distinguishes these cases removing the signer's plausible deniability. It is important that the confirmation and disavowal exchanges are not transferable. They achieve this by having the property of zero-knowledge; both parties can create transcripts of both confirmation and disavowal that are indistinguishable, to a third-party, of correct exchanges. The designated verifier signature scheme improves upon deniable signatures by allowing, for each signature, the interactive portion of the scheme to be offloaded onto another party, a designated verifier, reducing the burden on the signer. == Zero-knowledge protocol == The following protocol was suggested by David Chaum. A group, G, is chosen in which the discrete logarithm problem is intractable, and all operation in the scheme take place in this group. Commonly, this will be the finite cyclic group of order p contained in Z/nZ, with p being a large prime number; this group is equipped with the group operation of integer multiplication modulo n. An arbitrary primitive element (or generator), g, of G is chosen; computed powers of g then combine obeying fixed axioms. Alice generates a key pair, randomly chooses a private key, x, and then derives and publishes the public key, y = gx. === Message signing === Alice signs the message, m, by computing and publishing the signature, z = mx. === Confirmation (i.e., avowal) protocol === Bob wishes to verify the signature, z, of m by Alice under the key, y. Bob picks two random numbers: a and b, and uses them to blind the message, sending to Alice: c = magb. Alice picks a random number, q, uses it to blind, c, and then signing this using her private key, x, sending to Bob: s1 = cgq ands2 = s1x. Note that s1x = (cgq)x = (magb)xgqx = (mx)a(gx)b+q = zayb+q. Bob reveals a and b. Alice verifies that a and b are the correct blind values, then, if so, reveals q. Revealing these blinds makes the exchange zero knowledge. Bob verifies s1 = cgq, proving q has not been chosen dishonestly, and s2 = zayb+q, proving z is valid signature issued by Alice's key. Note that zayb+q = (mx)a(gx)b+q. Alice can cheat at step 2 by attempting to randomly guess s2. === Disavowal protocol === Alice wishes to convince Bob that z is not a valid signature of m under the key, gx; i.e., z ≠ mx. Alice and Bob have agreed an integer, k, which sets the computational burden on Alice and the likelihood that she should succeed by chance. Bob picks random values, s ∈ {0, 1, ..., k} and a, and sends: v1 = msga and v2 = zsya, where exponentiating by a is used to blind the sent values. Note that v2 = zsya = (mx)s(gx)a = v1x. Alice, using her private key, computes v1x and then the quotient, v1xv2−1 = (msga)x(zsgxa)−1 = msxz−s = (mxz−1)s. Thus, v1xv2−1 = 1, unless z ≠ mx. Alice then tests v1xv2−1 for equality against the values: (mxz−1)i for i ∈ {0, 1, …, k}; which are calculated by repeated multiplication of mxz−1 (rather than exponentiating for each i). If the test succeeds, Alice conjectures the relevant i to be s; otherwise, she conjectures random value. Where z = mx, (mxz−1)i = v1xv2−1 = 1 for all i, s is unrecoverable. Alice commits to i: she picks a random r and sends hash(r, i) to Bob. Bob reveals a. Alice confirms that a is the correct blind (i.e., v1 and v2 can be generated using it), then, if so, reveals r. Revealing these blinds makes the exchange zero knowledge. Bob checks hash(r, i) = hash(r, s), proving Alice knows s, hence z ≠ mx. If Alice attempts to cheat at step 3 by guessing s at random, the probability of succeeding is 1/(k + 1). So, if k = 1023 and the protocol is conducted ten times, her chances are 1 to 2100.
Read more →
ACTS Gigabit Satellite Network

The ACTS Gigabit Satellite Network was a pioneering, high-speed communications satellite network in the years 1993-2004, created as a prototype system to explore high-speed networking of digital endpoints. The system was jointly sponsored by NASA and ARPA, implemented by BBN Technologies and Motorola, and was inducted into the Space Technology Hall of Fame in April 1997. The Advanced Communications Technology Satellite (ACTS) network was designed to provide fiber-compatible SONET service to remote nodes and networks through a wideband satellite system, and provided long-haul, point-to-point and point-to-multipoint full-duplex SONET services, at rates up to 622 Mbit/s, over NASA's Advanced Communication Technology Satellite (ACTS). The Advanced Communications Technology Satellite itself, built and operated by Lockheed Martin, was launched on STS-51 on September 12, 1993, by the Space Shuttle Discovery, and occupied a geostationary orbit at 100° west longitude. It was the first communication satellite to operate in the 20–30 GHz frequency band (Ka band), with 30 GHz uplink and 20 GHz downlink signals. The satellite incorporated advanced on-board switching and multiple dynamically-hopping spot-beam antennas for selected areas of the United States including Hawaii. Up to 3 uplink and 3 downlink antenna beams could be active simultaneously. The ACTS network ground terminals were transportable Gigabit Earth Stations (GES) with fiber-optic SONET interfaces (OC-3 and OC-12), which also supported the Asynchronous Transfer Mode (ATM) protocol suite. The network control and management functions are distributed in the various Gigabit Earth Stations, with the operator's interface being centralized in a Network Management Terminal (NMT), which could be collocated at a GES, or anywhere in the Internet. The system was operational and used for experiments for 127 months, instead of the originally planned 24–48 months. In all, 53 terminals were built and used by more than 100 experimenters to test ACTS abilities. In Nov. 1997 a record data rate of 520 Mbit/s TCP/IP throughput was achieved using ATM between several ground stations via ACTS. On May 31, 2000 the ACTS experiments program officially came to a close, but the system continued to support experiments until it was deactivated on April 28, 2004.
Read more →
Discovery system (artificial intelligence)

A discovery system is an artificial intelligence system that attempts to discover new scientific concepts or laws. The aim of discovery systems is to automate scientific data analysis and the scientific discovery process. Ideally, an artificial intelligence system should be able to search systematically through the space of all possible hypotheses and yield the hypothesis - or set of equally likely hypotheses - that best describes the complex patterns in data. During the era known as the second AI summer (approximately 1978–1987), various systems akin to the era's dominant expert systems were developed to tackle the problem of extracting scientific hypotheses from data, with or without interacting with a human scientist. These systems included Autoclass, Automated Mathematician, Eurisko, which aimed at general-purpose hypothesis discovery, and more specific systems such as Dalton, which uncovers molecular properties from data. The dream of building systems that discover scientific hypotheses was pushed to the background with the second AI winter and the subsequent resurgence of subsymbolic methods such as neural networks. Subsymbolic methods emphasize prediction over explanation, and yield models which works well but are difficult or impossible to explain which has earned them the name black box AI. A black-box model cannot be considered a scientific hypothesis, and this development has even led some researchers to suggest that the traditional aim of science - to uncover hypotheses and theories about the structure of reality - is obsolete. Other researchers disagree and argue that subsymbolic methods are useful in many cases, just not for generating scientific theories. == Discovery systems from the 1970s and 1980s == Autoclass was a Bayesian Classification System written in 1986 Automated Mathematician was one of the earliest successful discovery systems. It was written in 1977 and worked by generating a modifying small Lisp programs Eurisko was a Sequel to Automated Mathematician written in 1984 Dalton is a still maintained program capable of calculating various molecular properties initially launched in 1983 and available in open source since 2017 Glauber is a scientific discovery method written in the context of computational philosophy of science launched in 1983 == Modern discovery systems (2009–present) == After a couple of decades with little interest in discovery systems, the interest in using AI to uncover natural laws and scientific explanations was renewed by the work of Michael Schmidt, then a PhD student in Computational Biology at Cornell University. Schmidt and his advisor, Hod Lipson, invented Eureqa, which they described as a symbolic regression approach to "distilling free-form natural laws from experimental data". This work effectively demonstrated that symbolic regression was a promising way forward for AI-driven scientific discovery. Since 2009, symbolic regression has matured further, and today, various commercial and open source systems are actively used in scientific research. Notable examples include Eureqa, now a part of DataRobot AI Cloud Platform, AI Feynman, and QLattice.
Read more →
Data analysis

Data analysis is the process of inspecting, cleansing, transforming, and modeling data with the goal of discovering useful information, informing conclusions, and supporting decision-making. Data analysis has multiple facets and approaches, encompassing diverse techniques under a variety of names, and is used in different business, science, and social science domains. In today's business world, data analysis plays an important role in making decisions more scientific and helping businesses operate more effectively. It is widely used in fields such as business analytics, healthcare, and artificial intelligence to extract meaningful insights from data. Data mining is a particular data analysis technique that focuses on statistical modeling and knowledge discovery for predictive rather than purely descriptive purposes, while business intelligence covers data analysis that relies heavily on aggregation, focusing mainly on business information. In statistical applications, data analysis can be divided into descriptive statistics, exploratory data analysis (EDA), and confirmatory data analysis (CDA). EDA focuses on discovering new features in the data, while CDA focuses on confirming or falsifying existing hypotheses. Predictive analytics focuses on the application of statistical models for predictive forecasting or classification, while text analytics applies statistical, linguistic, and structural techniques to extract and classify information from textual sources, a variety of unstructured data. All of the above are varieties of data analysis. == Data analysis process == Data analysis is a process for obtaining raw data, and subsequently converting it into information useful for decision-making by users. Statistician John Tukey, defined data analysis in 1961, as:"Procedures for analyzing data, techniques for interpreting the results of such procedures, ways of planning the gathering of data to make its analysis easier, more precise or more accurate, and all the machinery and results of (mathematical) statistics which apply to analyzing data." There are several phases, and they are iterative, in that feedback from later phases may result in additional work in earlier phases. === Data requirements === The data is necessary as inputs to the analysis, which is specified based upon the requirements of those directing the analytics (or customers, who will use the finished product of the analysis). The general type of entity upon which the data will be collected is referred to as an experimental unit (e.g., a person or population of people). Specific variables regarding a population (e.g., age and income) may be specified and obtained. Data may be numerical or categorical (i.e., a text label for numbers). === Data collection === Data may be collected from a variety of sources. A list of data sources are available for study & research. The requirements may be communicated by analysts to custodians of the data; such as, Information Technology personnel within an organization. Data collection or data gathering is the process of gathering and measuring information on targeted variables in an established system, which then enables one to answer relevant questions and evaluate outcomes. The data may also be collected from sensors in the environment, including traffic cameras, satellites, recording devices, etc. It may also be obtained through interviews, downloads from online sources, or reading documentation. === Data processing === Data integration is a precursor to data analysis: Data, when initially obtained, must be processed or organized for analysis. For instance, this may involve placing data into rows and columns in a table format (known as structured data) for further analysis, often through the use of spreadsheet (e.g. Excel) or statistical software. === Data cleaning === Once processed and organized, the data may be incomplete, contain duplicates, or contain errors. The need for data cleaning will arise from problems in the way that the data is entered and stored. Data cleaning is the process of preventing and correcting these errors. Common tasks include record matching, identifying inaccuracy of data, overall quality of existing data, deduplication, and column segmentation. Such data problems can also be identified through a variety of analytical techniques. For example; with financial information, the totals for particular variables may be compared against separately published numbers that are believed to be reliable. Unusual amounts, above or below predetermined thresholds, may also be reviewed. There are several types of data cleaning that are dependent upon the type of data in the set; this could be phone numbers, email addresses, employers, or other values. Quantitative data methods for outlier detection can be used to get rid of data that appears to have a higher likelihood of being input incorrectly. Text data spell checkers can be used to lessen the amount of mistyped words. However, it is harder to tell if the words are contextually (i.e., semantically and idiomatically) correct. === Exploratory data analysis === Once the datasets are cleaned, they can then begin to be analyzed using exploratory data analysis. The process of data exploration may result in additional data cleaning or additional requests for data; thus, the initialization of the iterative phases mentioned above. Descriptive statistics, such as the average, median, and standard deviation, are often used to broadly characterize the data. Data visualization is also used, in which the analyst is able to examine the data in a graphical format in order to obtain additional insights about messages within the data. === Modeling and algorithms === Mathematical formulas or mathematical models (supported by algorithms) may be applied to the data in order to identify relationships among the variables; for example, checking for correlation and by determining whether or not there is the presence of causality. In general terms, models may be developed to evaluate a specific variable based on other variable(s) contained within the dataset, with some residual error depending on the implemented model's accuracy (e.g., Data = Model + Error). Inferential statistics utilizes techniques that measure the relationships between particular variables. For example, regression analysis may be used to model whether a change in advertising (independent variable X), provides an explanation for the variation in sales (dependent variable Y), i.e. is Y a function of X? This can be described as (Y = aX + b + error), where the model is designed such that (a) and (b) minimize the error when the model predicts Y for a given range of values of X. === Data product === A data product is a computer application that takes data inputs and generates outputs, feeding them back into the environment. It may be based on a model or algorithm. For instance, an application that analyzes data about customer purchase history, and uses the results to recommend other purchases the customer might enjoy. === Communication === Once data is analyzed, it may be presented in many formats to the users of the analysis to support their requirements. The users may have feedback, which results in additional analysis. When determining how to communicate the results, the analyst may consider implementing a variety of data visualization techniques to help communicate the message more clearly and efficiently to the audience. Data visualization uses information displays (graphics such as, tables and charts) to help communicate key messages contained in the data. Tables are a valuable tool by enabling the ability of a user to query and focus on specific numbers; while charts (e.g., bar charts or line charts), may help explain the quantitative messages contained in the data. == Quantitative messages == Stephen Few described eight types of quantitative messages that users may attempt to communicate from a set of data, including the associated graphs. Time-series: A single variable is captured over a period of time, such as the unemployment rate over a 10-year period. A line chart may be used to demonstrate the trend. Ranking: Categorical subdivisions are ranked in ascending or descending order, such as a ranking of sales performance (the measure) by salespersons (the category, with each salesperson a categorical subdivision) during a single period. A bar chart may be used to show the comparison across the salespersons. Part-to-whole: Categorical subdivisions are measured as a ratio to the whole (i.e., a percentage out of 100%). A pie chart or bar chart can show the comparison of ratios, such as the market share represented by competitors in a market. Deviation: Categorical subdivisions are compared against a reference, such as a comparison of actual vs. budget expenses for several departments of a business for a given time period. A bar chart can show the comparison of the actual versus the reference amount. Frequency distribution:
Read more →
AS1 (networking)

AS1 (Applicability Statement 1) is a specification about how to transport structured business-to-business data securely and reliably over the Internet. Security is achieved by using digital certificates and encryption. == AS1 technical overview == The AS1 protocol is based on SMTP and S/MIME. It was the first AS protocol developed and uses signing, encryption and MDN conventions. In other words: Files are sent as "attachments" in a specially coded SMIME email message Messages can be signed, but do not have to be Messages can be encrypted, but do not have to be Messages may request an MDN back if all went well, but do not have to request such a message If the original AS1 message requested an MDN... Upon the receipt of the message and its successful decryption or signature validation (as necessary) a "success" MDN will be sent back to the original sender. This MDN is typically signed but not encrypted. Upon the receipt and successful verification of the signature on the MDN, the original sender will "know" that the recipient got their message (this provides the "Non-repudiation" element of AS1) If there are any problems receiving or interpreting the original AS1 message, a "failed" MDN may be sent back. Like any other AS file transfer, AS1 file transfers typically require both sides of the exchange to trade X.509 certificates and specific "trading partner" names before any transfers can take place.
Read more →
Brooklyn Bridge (software)

The Brooklyn Bridge from White Crane Systems was a data transfer enabler. Although it came with some hardware, it was the software which was the basis of the product. It also could transform the data's format. == Overview == The New York Times described its category as being among "communications packages used to transfer files." In an era of 300 baud, Brooklyn Bridge operated at "115,200 baud" so that a transfer which "at 300 baud took 4 minutes and 36 seconds" only needed 5 seconds. Unlike some communications packages, this one retains the original version-date, so as not to alarm people when they seem to have what looks like an update, when it's not. == Description == Once the software is installed, users comfortable with typing the word "COPY" can do so as readily as they sneakernet. An earlier review described it as "less cumbersome than conventional communications software" The use of neither specialized hardware nor specialized software is ideal in an era when this can be done using online or other "outside" services.
Read more →
List of monochrome and RGB color formats

This list of monochrome and RGB palettes includes generic repertoires of colors (color palettes) to produce black-and-white and RGB color pictures by a computer's display hardware. RGB is the most common method to produce colors for displays; so these complete RGB color repertoires have every possible combination of R-G-B triplets within any given maximum number of levels per component. Each palette is represented by a series of color patches. When the number of colors is low, a 1-pixel-size version of the palette appears below it, for easily comparing relative palette sizes. Huge palettes are given directly in one-color-per-pixel color patches. For each unique palette, an image color test chart and sample image (truecolor original follows) rendered with that palette (without dithering) are given. The test chart shows the full 256 levels of the red, green, and blue (RGB) primary colors and cyan, magenta, and yellow complementary colors, along with a full 256-level grayscale. Gradients of RGB intermediate colors (orange, lime green, sea green, sky blue, violet, and fuchsia), and a full hue spectrum are also present. Color charts are not gamma corrected. These elements illustrate the color depth and distribution of the colors of any given palette, and the sample image indicates how the color selection of such palettes could represent real-life images. These images are not necessarily representative of how the image would be displayed on the original graphics hardware, as the hardware may have additional limitations regarding the maximum display resolution, pixel aspect ratio and color placement. Implementation of these formats is specific to each machine. Therefore, the number of colors that can be simultaneously displayed in a given text or graphic mode might be different. Also, the actual displayed colors are subject to the output format used - PAL or NTSC, composite or component video, etc. - and might be slightly different. For simulated images and specific hardware and alternate methods to produce colors other than RGB (ex: composite), see the List of 8-bit computer hardware palettes, the List of 16-bit computer hardware palettes and the List of video game console palettes. For various software arrangements and sorts of colors, including other possible full RGB arrangements within 8-bit color depth displays, see the List of software palettes. == Monochrome palettes == These palettes only have some shades of gray, from black to white (considered the darkest and lightest "grays", respectively). The general rule is that those palettes have 2n different shades of gray, where n is the number of bits needed to represent a single pixel. === Monochrome (1-bit grayscale) === Monochrome graphics displays typically have a black background with a white or light gray image, though green and amber monochrome monitors were also common. Such a palette requires only one bit per pixel. Where photo-realism was desired, these early computer systems had a heavy reliance on dithering to make up for the limits of the technology. In some systems, as Hercules and CGA graphic cards for the IBM PC, a bit value of 1 represents white pixels (light on) and a value of 0 the black ones (light off); others, like the Playdate and Atari ST and Apple Macintosh with monochrome monitors, a bit value of 0 means a white pixel (no ink) and a value of 1 means a black pixel (dot of ink), which it approximates to the printing logic. === 2-bit Grayscale === In a 2-bit color palette each pixel's value is represented by 2 bits resulting in a 4-value palette (22 = 4). 2-bit dithering: It has black, white and two intermediate levels of gray as follows: A monochrome 2-bit palette is used on: The Monochrome Display Adapter for the IBM PC NeXT Computer, NeXTcube and NeXTstation monochrome graphic displays. Original Game Boy system portable video game console. Macintosh PowerBook 150 monochrome LC displays. Amiga with A2024 monochrome monitor in high-resolution mode. The original Amazon Kindle The original WonderSwan The Tiger Electronics Game.com portable video game console The original Neo Geo Pocket. === 4-bit Grayscale === In a 4-bit color palette each pixel's value is represented by 4 bits resulting in a 16-value palette (24 = 16): 4-bit grayscale dithering does a fairly good job of reducing visible banding of the level changes: A monochrome 4-bit palette is used on: MOS Technology VDC (on the Commodore 128 with monochrome monitor) Amstrad CPC series with a GT64/GT65 Green Monitor (16 unique green shades) Amstrad CPC Plus series with the MM12 Monochrome monitor (16 shades of grey) Some Apple PowerBooks equipped with monochrome displays like the PowerBook 5300 The original VideoNow === 8-bit Grayscale === In an 8-bit color palette each pixel's value is represented by 8 bits resulting in a 256-value palette (28 = 256). This is usually the maximum number of grays in ordinary monochrome systems; each image pixel occupies a single memory byte. Most scanners can capture images in 8-bit grayscale, and image file formats like TIFF and JPEG natively support this monochrome palette size. Alpha channels employed for video overlay also use (conceptually) this palette. The gray level indicates the opacity of the blended image pixel over the background image pixel. == Dichrome palettes == === 16-bit RG palette === The RG or red–green color space is a color space that uses only two primary colors: red and green. It was used on early color processes for films. It was used as an additive format, similar to the RGB color model but without a blue channel, on processes such as Kinemacolor, Prizma, Technicolor I, Raycol, etc., producing shades of black, red, green and yellow. Alternatively, it was used as a subtractive format on Brewster Color I, Kodachrome I, Prizma II, Technicolor II, etc., producing shades of transparent, red, green and black. Until recently, its primary use was in low-cost light-emitting diode displays in which red and green tended to be far more common than the still nascent blue LED technology, but full-color LEDs with blue have become more common in recent years. ColorCode 3-D, a anaglyph stereoscopic color scheme, uses the RG color space to simulate a broad spectrum of color in one eye, while the blue portion of the spectrum transmits a black-and-white (black-and-blue) image to the other eye to give depth perception. === 16-bit RB palette === === 16-bit GB palette === == Regular RGB palettes == Here are grouped those full RGB hardware palettes that have the same number of binary levels (i.e., the same number of bits) for every red, green and blue components using the full RGB color model. Thus, the total number of colors are always the number of possible levels by component, n, raised to a power of 3: n×n×n = n3. === 3-bit RGB === 3-bit RGB dithering: Systems with a 3-bit RGB palette use 1 bit for each of the red, green and blue color components. That is, each component is either "on" or "off" with no intermediate states. This results in an 8-color palette ((21)3 = 23 = 8) that has black, white, the three RGB primary colors red, green and blue and their correspondent complementary colors cyan, magenta and yellow as follows: The color indices vary between implementations; therefore, index numbers are not given. The 3-bit RGB palette is used by: Text terminals following the ECMA-48 standard (sometimes known as the "ANSI standard", although ANSI X3.128 does not define colors) World System Teletext Level 1/1.5 Videotex Oric computers BBC Micro PC-8801 (up to the MkII) PC-9801 (with original 8086 CPU, before the VM/VX models) Sharp X1 (models before the X1 Turbo Z) Sharp MZ 700 FM-7, FM New 7, FM 77 (before the FM77AV) Sinclair QL Space Invaders Part II (arcade hardware) Macintosh SE (with a color printer or external monitor) Atari 2600 (SECAM version) Color Maximite (PIC32 based microcomputer) Arcadia 2001 PV-1000 Monkey Magic (arcade hardware) VIC-20 (high-res mode) Mouse Trap (arcade hardware) Sanyo MBC-550 series Windows 1.0 (includes dithering) === 6-bit RGB === Systems with a 6-bit RGB palette use 2 bits for each of the red, green, and blue color components. This results in a (22)3 = 43 = 64-color palette as follows: 6-bit RGB systems include the following: Enhanced Graphics Adapter (EGA) for IBM PC/AT (16 colors at once) Sega Master System video game console (32 colors at once) GIME for TRS-80 Color Computer 3 (16 colors at once) Pebble Time smartwatch which has a 6-bit (64 color) e-paper display Parallax Propeller using the reference VGA circuit === 9-bit RGB === Systems with a 9-bit RGB palette use 3 bits for each of the red, green, and blue color components. This results in a (23)3 = 83 = 512-color palette as follows: 9-bit RGB systems include the following: Atari ST (Normally 4 to 16 at once without tricks) MSX2 computers (up to 16 at once) Sega Genesis video game console, (64 colors at once) Sega Nomad TurboGrafx-16 (NEC PC-Engine) ZX Spectrum Next The NEC PC-88
Read more →
Cipher

In cryptography, a cipher (or cypher) is an algorithm for performing encryption or decryption—a series of well-defined steps that can be followed as a procedure. An alternative, less common term is encipherment. To encipher or encode is to convert information into cipher or code. In common parlance, "cipher" is synonymous with "code", as they are both a set of steps that encrypt a message; however, the concepts are distinct in cryptography, especially classical cryptography. Codes generally substitute different length strings of characters in the output, while ciphers generally substitute the same number of characters as are input. A code maps one meaning with another. Words and phrases can be coded as letters or numbers. Codes typically have direct meaning from input to key. Codes primarily function to save time. Ciphers are algorithmic. The given input must follow the cipher's process to be solved. Ciphers are commonly used to encrypt written information. Codes operated by substituting according to a large codebook which linked a random string of characters or numbers to a word or phrase. For example, "UQJHSE" could be the code for "Proceed to the following coordinates.". When using a cipher the original information is known as plaintext, and the encrypted form as ciphertext. The ciphertext message contains all the information of the plaintext message, but is not in a format readable by a human or computer without the proper mechanism to decrypt it. The operation of a cipher usually depends on a piece of auxiliary information, called a key (or, in traditional NSA parlance, a cryptovariable). The encrypting procedure is varied depending on the key, which changes the detailed operation of the algorithm. A key must be selected before using a cipher to encrypt a message, with some exceptions such as ROT13 and Atbash. Most modern ciphers can be categorized in several ways: By whether they work on blocks of symbols usually of a fixed size (block ciphers), or on a continuous stream of symbols (stream ciphers). By whether the same key is used for both encryption and decryption (symmetric key algorithms), or if a different key is used for each (asymmetric key algorithms). If the algorithm is symmetric, the key must be known to the recipient and sender and to no one else. If the algorithm is an asymmetric one, the enciphering key is different from, but closely related to, the deciphering key. If one key cannot be deduced from the other, the asymmetric key algorithm has the public/private key property and one of the keys may be made public without loss of confidentiality. == Etymology == Originating from the Sanskrit word for zero शून्य (śuṇya), via the Arabic word صفر (ṣifr), the word "cipher" spread to Europe as part of the Arabic numeral system during the Middle Ages. The Roman numeral system lacked the concept of zero, and this limited advances in mathematics. In this transition, the word was adopted into Medieval Latin as cifra, and then into Middle French as cifre. This eventually led to the English word cipher (also spelt cypher). One theory for how the term came to refer to encoding is that the concept of zero was confusing to Europeans, and so the term came to refer to a message or communication that was not easily understood. The term cipher was later also used to refer to any Arabic digit, or to calculation using them, so encoding text in the form of Arabic numerals is literally converting the text to "ciphers". == Versus codes == In casual contexts, "code" and "cipher" can typically be used interchangeably; however, the technical usages of the words refer to different concepts. Codes contain meaning; words and phrases are assigned to numbers or symbols, creating a shorter message. An example of this is the commercial telegraph code which was used to shorten long telegraph messages which resulted from entering into commercial contracts using exchanges of telegrams. Another example is given by whole word ciphers, which allow the user to replace an entire word with a symbol or character, much like the way written Japanese utilizes Kanji (meaning Chinese characters in Japanese) characters to supplement the native Japanese characters representing syllables. An example using English language with Kanji could be to replace "The quick brown fox jumps over the lazy dog" by "The quick brown 狐 jumps 上 the lazy 犬". Stenographers sometimes use specific symbols to abbreviate whole words. Ciphers, on the other hand, work at a lower level: the level of individual letters, small groups of letters, or, in modern schemes, individual bits and blocks of bits. Some systems used both codes and ciphers in one system, using superencipherment to increase the security. In some cases the terms codes and ciphers are used synonymously with substitution and transposition, respectively. Historically, cryptography was split into a dichotomy of codes and ciphers, while coding had its own terminology analogous to that of ciphers: "encoding, codetext, decoding" and so on. However, codes have a variety of drawbacks, including susceptibility to cryptanalysis and the difficulty of managing a cumbersome codebook. Because of this, codes have fallen into disuse in modern cryptography, and ciphers are the dominant technique. == Types == There are a variety of different types of encryption. Algorithms used earlier in the history of cryptography are substantially different from modern methods, and modern ciphers can be classified according to how they operate and whether they use one or two keys. === Historical === The Caesar Cipher is one of the earliest known cryptographic systems. Julius Caesar used a cipher that shifts the letters in the alphabet in place by three and wrapping the remaining letters to the front to write to Marcus Tullius Cicero in approximately 50 BC. Historical pen and paper ciphers used in the past are sometimes known as classical ciphers. They include simple substitution ciphers (such as ROT13) and transposition ciphers (such as a Rail Fence Cipher). For example, "GOOD DOG" can be encrypted as "PLLX XLP" where "L" substitutes for "O", "P" for "G", and "X" for "D" in the message. Transposition of the letters "GOOD DOG" can result in "DGOGDOO". These simple ciphers and examples are easy to crack, even without plaintext-ciphertext pairs. In the 1640s, the Parliamentarian commander, Edward Montagu, 2nd Earl of Manchester, developed ciphers to send coded messages to his allies during the English Civil War. The English theologian John Wilkins published a book in 1641 titled "Mercury, or The Secret and Swift Messenger" and described a musical cipher wherein letters of the alphabet were substituted for music notes. This species of melodic cipher was depicted in greater detail by author Abraham Rees in his book Cyclopædia (1778). Simple ciphers were replaced by polyalphabetic substitution ciphers (such as the Vigenère) which changed the substitution alphabet for every letter. For example, "GOOD DOG" can be encrypted as "PLSX TWF" where "L", "S", and "W" substitute for "O". With even a small amount of known or estimated plaintext, simple polyalphabetic substitution ciphers and letter transposition ciphers designed for pen and paper encryption are easy to crack. It is possible to create a secure pen and paper cipher based on a one-time pad, but these have other disadvantages. During the early twentieth century, electro-mechanical machines were invented to do encryption and decryption using transposition, polyalphabetic substitution, and a kind of "additive" substitution. In rotor machines, several rotor disks provided polyalphabetic substitution, while plug boards provided another substitution. Keys were easily changed by changing the rotor disks and the plugboard wires. Although these encryption methods were more complex than previous schemes and required machines to encrypt and decrypt, other machines such as the British Bombe were invented to crack these encryption methods. === Modern === Modern encryption methods can be divided by two criteria: by type of key used, and by type of input data. By type of key used ciphers are divided into: symmetric key algorithms (Private-key cryptography), where one same key is used for encryption and decryption, and asymmetric key algorithms (Public-key cryptography), where two different keys are used for encryption and decryption. In a symmetric key algorithm (e.g., DES and AES), the sender and receiver must have a shared key set up in advance and kept secret from all other parties; the sender uses this key for encryption, and the receiver uses the same key for decryption. The design of AES (Advanced Encryption System) was beneficial because it aimed to overcome the flaws in the design of the DES (Data encryption standard). AES's designer's claim that the common means of modern cipher cryptanalytic attacks are ineffective against AES due to its design structure. Ciphers can be distinguished into two types by the type o
Read more →
Bus encryption

Bus encryption is the use of encrypted program instructions on a data bus in a computer that includes a secure cryptoprocessor for executing the encrypted instructions. Bus encryption is used primarily in electronic systems that require high security, such as automated teller machines, TV set-top boxes, and secure data communication devices such as two-way digital radios. Bus encryption can also mean encrypted data transmission on a data bus from one processor to another processor. For example, from the CPU to a GPU which does not require input of encrypted instructions. Such bus encryption is used by Windows Vista and newer Microsoft operating systems to protect certificates, BIOS, passwords, and program authenticity. PVP-UAB (Protected Video Path) provides bus encryption of premium video content in PCs as it passes over the PCIe bus to graphics cards to enforce digital rights management. The need for bus encryption arises when multiple people have access to the internal circuitry of an electronic system, either because they service and repair such systems, stock spare components for the systems, own the system, steal the system, or find a lost or abandoned system. Bus encryption is necessary not only to prevent tampering of encrypted instructions that may be easily discovered on a data bus or during data transmission, but also to prevent discovery of decrypted instructions that may reveal security weaknesses that an intruder can exploit. In TV set-top boxes, it is necessary to download program instructions periodically to customer's units to provide new features and to fix bugs. These new instructions are encrypted before transmission, but must also remain secure on data buses and during execution to prevent the manufacture of unauthorized cable TV boxes. This can be accomplished by secure crypto-processors that read encrypted instructions on the data bus from external data memory, decrypt the instructions in the cryptoprocessor, and execute the instructions in the same cryptoprocessor.
Read more →
Content engineering

Content engineering is a term applied to an engineering specialty dealing with the complexities around the use of content in computer-facilitated environments. Content authoring and production, content management, content modeling, content conversion, and content use and repurposing are all areas involving this practice. It is not a specialty with wide industry recognition and is often performed on an ad hoc basis by members of software development or content production or marketing staff, but is beginning to be recognized as a necessary function in any complex content-centric project involving both content production as well as software system development mainly involving content management systems (CMS) or digital experience platforms (DXP). Content engineering tends to bridge the gap between groups involved in the production of content (publishing and editorial staff, marketing, sales, human resources) and more technologically oriented departments such as software development, or IT that put this content to use in web or other software-based environments, and requires an understanding of the issues and processes of both sides. Typically, content engineering involves extensive use of embedded XML technologies, XML being the most widespread language for representing structured content. Content management systems are a key technology often used in the practice of content engineering. == Definition == Content engineering is the practice of organizing the shape and structure of content by deploying content and metadata models, in authoring and publishing processes in a manner that meets the requirements of an organization's Content Strategy, and its implementation through the use of technology such as CMS, XML, schema markup, artificial intelligence, APIs and others. == Purpose and goal == In very general terms, content engineering practices aim to maximize the ROI of content through content reuse and improving efficiency of content marketing, content operations, content strategy. Content engineering can help address content challenges that fairly typical organizations face: Siloed content supply chains Duplicate content in a myriad of formats Inefficient content authoring workflows Chunky, unstructured content Outdated technology Technology in place does not match needs Inability to reuse content across channels (multi-channel content) Metadata and schema are not used Lack of standards for metadata Lack of findability of content for internal and external use Poor SEO performance Inability to implement personalization == Key skills == Content engineering draws on a combination of technical, strategic, and editorial competencies. Practitioners typically require proficiency across several domains: === Content modeling and information architecture === Content engineers design structured content models that define how content is created, stored, and distributed. This includes building taxonomies, ontologies, and metadata schemas that enable content reuse across channels and platforms. === Structured content and markup languages === Proficiency in XML, JSON, HTML, and schema.org markup is fundamental. Content engineers use these languages to structure content for machine readability, search engine optimization, and interoperability between systems. === Content management systems and platforms === Content engineers require working knowledge of content management systems (CMS), digital experience platforms (DXP), and headless CMS architectures. This includes configuring content types, workflows, and publishing pipelines within these systems. === Workflow design and automation === Designing and implementing content workflows - from authoring through review, approval, and distribution - is a core function. Increasingly, this involves configuring AI-assisted and agentic workflows that automate research, drafting, repurposing, and distribution tasks at scale. === Content strategy and editorial understanding === Unlike purely technical roles, content engineering requires a working understanding of content strategy, brand management, editorial standards, and audience analysis. Content engineers must translate strategic objectives into technical content structures and system configurations. === API integration and data interoperability === Content engineers work with APIs to connect content systems, analytics platforms, distribution channels, and third-party services. Understanding how content flows between systems is essential for enabling multi-channel publishing and content personalization. === Analytics and performance measurement === Measuring content effectiveness through web analytics, SEO performance data, and engagement metrics informs how content engineers refine structures, metadata, and distribution workflows. == The role of a content engineer == Content engineers bridge the divide between content strategists and producers and the developers and content managers who publish and distribute content. But rather than simply wedging themselves between these players, content engineers help define and facilitate the content structure during the entire content strategy, production and distribution cycle from beginning to end. As the role has evolved, content engineers are increasingly expected to build and manage AI-powered content systems, moving beyond traditional CMS configuration into agentic workflows that automate content research, production, and distribution. By integrating skills in business and technology, content engineers do not see content as static or finished. Rather, they look at the value of the content and how it can best be adapted and personalized to serve customers and emerging content platforms, technologies, and opportunities. === Create customer experience === Content marketing suffers from two fundamental limitations that constrain the true power and potential that a great content marketing plan can bring to a business' bottom line: Content relevance: how to make content more relevant and personalized to their audiences. The marketer and content strategist direct the customer experience itself, and the content engineer makes it happen with content structure, schema, metadata, microdata, taxonomy, and CMS topology. Content agility: Marketers who are burdened with one-size-fits-all content remain stuck managing their content rather than their customers' experience. Content engineers give marketers the "super powers" to move content-powered experiences across interfaces and personalization variants. === Break down barriers === Empower content strategists: Content engineers work with content strategists by helping them connect content not as a fixed message, but as a modular construct which can be channeled and manipulated. Enable content producers: A content engineer will work with a content producer by helping to find new sources of content and ways the content can be combined and presented. Guide and free developers: The content engineer helps translate marketing strategy into clear technical needs and functions developers can build into content management systems Enhance content management: Develop content structures that make it easier for content writers and content managers to author to a single, very usable, interface for even complex content types that might contain dozens of elements. Engineer content for success: Content engineers help all members of a marketing team work more smoothly, with the support and structures needed to get the most out of the content they produce. === Salary benchmarks === Content engineering roles command significantly higher salaries than traditional content marketing positions. In the United States, IC-level content engineers earn between $120,000 and $165,000 annually, while senior roles reach $160,000 to $220,000. Head of content engineering positions range from $200,000 to $280,000, and VP-level roles can exceed $375,000. The emergence of dedicated content engineer job postings from companies such as Exit Five reflects the growing recognition of the role as a distinct function within marketing organizations.
Read more →
Web intelligence

Web intelligence is the area of scientific research and development that explores the roles and makes use of artificial intelligence and information technology for new products, services and frameworks that are empowered by the World Wide Web. The term was coined in a paper written by Ning Zhong, Jiming Liu Yao and Y.Y. Ohsuga in the Computer Software and Applications Conference in 2000. == Research == The research about the web intelligence covers many fields – including data mining (in particular web mining), information retrieval, pattern recognition, predictive analytics, the semantic web, web data warehousing – typically with a focus on web personalization and adaptive websites.
Read more →
Completeness (cryptography)

In cryptography, a boolean function is said to be complete if the value of each output bit depends on all input bits. This is a desirable property to have in an encryption cipher, so that if one bit of the input (plaintext) is changed, every bit of the output (ciphertext) has an average of 50% probability of changing. The easiest way to show why this is good is the following: consider that if we changed our 8-byte plaintext's last byte, it would only have any effect on the 8th byte of the ciphertext. This would mean that if the attacker guessed 256 different plaintext-ciphertext pairs, he would always know the last byte of every 8byte sequence we send (effectively 12.5% of all our data). Finding out 256 plaintext-ciphertext pairs is not hard at all in the internet world, given that standard protocols are used, and standard protocols have standard headers and commands (e.g. "get", "put", "mail from:", etc.) which the attacker can safely guess. On the other hand, if our cipher has this property (and is generally secure in other ways, too), the attacker would need to collect 264 (~1020) plaintext-ciphertext pairs to crack the cipher in this way.
Read more →
Blacker (security)

Blacker (styled BLACKER) is a U.S. Department of Defense computer network security project designed to achieve A1 class ratings (very high assurance) of the Trusted Computer System Evaluation Criteria (TCSEC). The first Blacker program began in the late 1970s, with a follow-on eventually producing fielded devices in the late 1980s. It was the first secure system with trusted end-to-end encryption on the United States' Defense Data Network. The project was implemented by SDC (software), and Burroughs (hardware), and after their merger, by the resultant company Unisys.
Read more →