AI Image Generators

Explore the best AI Image Generators — independent reviews, comparisons, pricing and step-by-step how-to guides, curated by Aizhi.

• 

  Sprite multiplexing

  Sprite multiplexing is a computer graphics technique where additional sprites (moving images) can be drawn on the screen, beyond the nominal maximum. It is largely historical, applicable principally to older hardware, where limited resources (such as CPU speed and memory) meant only a relatively small number of sprites were supported. On the other hand, it is also true that without multiplexing, the sprite circuitry would be idle much of the time, and limited resources were wasted. == Description == The sprite multiplexing technique is based on the idea that while the hardware may only support a finite number of sprites, it is sometimes possible to re-use the same sprite "slots" more than once per frame or scan line. The program will first use the hardware to draw one or more sprite(s), as normal. Before the next frame (or next scanline) needs to be drawn, the software reprograms the hardware to display additional sprites, in other positions. For example, the Nintendo Entertainment System explicitly supports hardware sprite multiplexing, where it has 64 hardware sprites, but is only capable of rendering 8 of them per scanline. On the older Atari 2600, sprite multiplexing was not intentionally designed in, but programmers discovered they could reset the TIA graphics chip to draw additional sprites on the same scanline. The sprite multiplexing technique relies on the program being able to identify what part of the video screen is being drawn at the moment, or being triggered by the video hardware to run a subroutine at the crucial moment. The programmer must carefully consider the layout of the screen. If the video graphics hardware is not reprogrammed in time for the extra sprites to be displayed, they will not appear, or will be drawn incorrectly. Modern video graphics hardware typically does not use hardware sprites, since modern computer systems do not have the kind of limitations that sprite hardware is designed to circumvent. == Implementations == Systems that allow the programmer to employ the sprite multiplexing technique include: Atari 2600 Atari 8-bit computers Amiga Commodore 64 MSX Nintendo Entertainment System Super Nintendo Entertainment System Master System Sega Genesis/Mega Drive

  Read more →
• 

  Security and Privacy in Computer Systems

  Security and Privacy in Computer Systems is a paper by Willis Ware that was first presented to the public at the 1967 Spring Joint Computer Conference. == Significance == Ware's presentation was the first public conference session about information security and privacy in respect of computer systems, especially networked or remotely-accessed ones. The IEEE Annals of the History of Computing said that Ware's 1967 Spring Joint Computer Conference session, together with 1970's Ware report, marked the start of the field of computer security.

  Read more →
• 

  Outline of databases

  The following is provided as an overview of and topical guide to databases: Database – organized collection of data, today typically in digital form. The data are typically organized to model relevant aspects of reality (for example, the availability of rooms in hotels), in a way that supports processes requiring this information (for example, finding a hotel with vacancies). == What type of things are databases? == Databases can be described as all of the following: Information – sequence of symbols that can be interpreted as a message. Information can be recorded as signs, or transmitted as signals. Data – values of qualitative or quantitative variables, belonging to a set of items. Data in computing (or data processing) are often represented by a combination of items organized in rows and multiple variables organized in columns. Data are typically the results of measurements and can be visualised using graphs or images. Computer data – information in a form suitable for use with a computer. Data is often distinguished from programs. A program is a sequence of instructions that detail a task for the computer to perform. In this sense, data is everything in software that is not program code. == Types of databases == Active database – Database with event driven features Animation database – Database for storing and reusing animation fragments or motion capture data Back-end database – Organized collection of data in computingPages displaying short descriptions of redirect targets Bibliographic database – database of bibliographic records, an organized digital collection of references to published literature, including journal and newspaper articles, conference proceedings, reports, government and legal publications, patents, books, etc. Centralized database – database located and maintained in one location, unlike a distributed database. Cloud database – Database running on a cloud computing platform Collection database – collection catalog of a museum or archive implemented using a computerized database, in which the institution's objects or material are catalogued. Collective Optimization Database – open repository to enable sharing of benchmarks, data sets and optimization cases from the community, provide web services and Plug-in (computing)|plugins to analyze optimization data and predict program transformations or better hardware designs for multi-objective optimizations based on statistical and machine learning techniques provided there is enough information collected in the repository from multiple users. Configuration management database – Database used to store info on hardware and software assets Cooperative database – holds information on customers and their transactions. Current database – conventional database that stores data that is valid now. Directory – repository or database of information which is optimized for reading, under the assumption that data updates are very rare compared to data reads. Commonly, a directory supports search and browsing in addition to simple lookups. Distributed database – database in which storage devices are not all attached to a common CPU. Document-oriented database – computer program designed for storing, retrieving, and managing document-oriented, or Semi-structured model|semi structured data, information. EDA database – database specialized for the purpose of electronic design automation. Endgame tablebase – computerized database that contains precalculated exhaustive analysis of a chess endgame position. Food composition database (FCDB) – provides detailed information on the nutritional composition of foods. Full-text database – database that contains the complete text of books, dissertations, journals, magazines, newspapers or other kinds of textual documents. Also called a "complete-text database". Government database – collects personal information for various reasons (mass surveillance, Schengen Information System in the European Union, social security, statistics, etc.). Graph database – uses graph structures with nodes, edges, and properties to represent and store data. Knowledge base – special kind of database for knowledge management. A knowledge base provides a means for information to be collected, organised, shared, searched and utilised. Mobile database – can be connected to by a mobile computing device over a mobile network. Navigational database – database in which objects (or records) in it are found primarily by following references from other objects. Non-native speech database – speech database of non-native pronunciations of English. Online database – database accessible from a network, including from the Internet. Operational database – accessed by an Operational System to carry out regular operations of an organization. Parallel database – improves performance through parallelization of various operations, such as loading data, building indexes and evaluating queries. Probabilistic database – uncertain database in which the possible worlds have associated probabilities. Real-time database – processing system designed to handle workloads whose state is constantly changing (Buchmann). Relational database – collection of data items organized as a set of formally described tables from which data can be accessed easily. Spatial database – database that is optimized to store and query data that is related to objects in space, including points, lines and polygons. Temporal database – database with built-in time aspects, for example a temporal data model and a temporal version of Structured Query Language (SQL). Time series database – a time series is an associative array of numbers indexed by a datetime or a datetime range. These time series are often called profiles or curves, depending upon the market. A time series of stock prices might be called a price curve, or a time series of energy consumption might be called a load profile. Despite the disparate naming, the operations performed on them are sufficiently common as to demand special database treatment. Triplestore – purpose-built database for the storage and retrieval of triples, a triple being a data entity composed of subject-predicate-object, like "Bob is 35" or "Bob knows Fred". Very large database (VLDB) – contains an extremely high number of tuples (database rows), or occupies an extremely large physical filesystem storage space. Vulnerability database – platform aimed at collecting, maintaining, and disseminating information about discovered vulnerabilities targeting real computer systems. XLDB – Stands for "eXtremely Large Data Base". XML database – data stored in XML format, where it can be queried, exported and serialized into the desired format. == History of databases == History of databases – History of database management systems –: == Database use == Database usage requirements – Database theory – encapsulates a broad range of topics related to the study and research of the theoretical realm of databases and database management systems. Database machine – or is a computer or special hardware that stores and retrieves data from a database. Also called a "back end processor" Database server – computer program that provides database services to other computer programs or computers, as defined by the client-server model. Database application – computer program whose primary purpose is entering and retrieving information from a computer-managed database. Database management system (DBMS) – software package with computer programs that control the creation, maintenance, and use of a database. Database connection – facility in computer science that allows client software to communicate with database server software, whether on the same machine or not. Datasource – name given to the connection set up to a database from a server. The name is commonly used when creating a query to the database. The Database Source Name (DSN) does not have to be the same as the filename for the database. For example, a database file named "friends.mdb" could be set up with a DSN of "school". Then DSN "school" would then be used to refer to the database when performing a query. Data Source Name (DSN) – are data structures used to describe a connection to a data source. Sometimes known as a database source name though data sources are not limited to databases. Database administrator (DBA) – is a person responsible for the installation, configuration, upgrade, administration, monitoring and maintenance of physical databases. Lock – Comparison of database tools – (provides tables for comparing general and technical information for a number of available database administrator tools.) Database-centric architecture – software architectures in which databases play a crucial role. Also called "data-centric architecture". Intelligent database – was put forward as a system that manages information (rather than data) in a way that appears natural to users and which goes beyond simple record keeping. Two-phase locking (2PL) – is a

  Read more →
• 

  Swap chain

  In computer graphics, a swap chain (also swapchain) is a series of virtual framebuffers used by the graphics card and graphics API for frame rate stabilization, stutter reduction, and several other purposes. Because of these benefits, many graphics APIs require the use of a swap chain. The swap chain usually exists in graphics memory, but it can exist in system memory as well. A swap chain with two buffers is a kind of double buffer. == Function == In every swap chain there are at least two buffers. The first framebuffer, the screenbuffer, is the buffer that is rendered to the output of the video card. The remaining buffers are known as backbuffers. Each time a new frame is displayed, the first backbuffer in the swap chain takes the place of the screenbuffer, this is called presentation or swapping. A variety of other actions may be taken on the previous screenbuffer and other backbuffers (if they exist). The screenbuffer may be simply overwritten or returned to the back of the swap chain for further processing. The action taken is decided by the client application and is API dependent. == Direct3D == Microsoft Direct3D implements a SwapChain class. Each host device has at least one swap chain assigned to it, and others may be created by the client application. The API provides three methods of swapping: copy, discard, and flip. When the SwapChain is set to flip, the screenbuffer is copied onto the last backbuffer, then all the existing backbuffers are copied forward in the chain. When copy is set, each backbuffer is copied forward, but the screenbuffer is not wrapped to the last buffer, leaving it unchanged. Flip does not work when there is only one backbuffer, as the screenbuffer is copied over the only backbuffer before it can be presented. In discard mode, the driver selects the best method. == Comparison with triple buffering == Outside the context of Direct3D, triple buffering refers to the technique of allowing an application to draw to whichever back buffer was least recently updated. This allows the application to always proceed with rendering, regardless of the pace at which frames are being drawn by the application or the pace at which frames are being sent to the display. Triple buffering may result in a frame being discarded without being displayed if two or more newer frames are completely rendered in the time it takes for one frame to be sent to the display. By contrast, Direct3D swap chains are a strict first-in, first-out queue, so every frame that is drawn by the application will be displayed even if newer frames are available. Direct3D does not implement a most-recent buffer swapping strategy, and Microsoft's documentation calls a Direct3D swap chain of three buffers "triple buffering". Triple buffering as described above is superior for interactive purposes such as gaming, but Direct3D swap chains of more than three buffers can be better for tasks such as presenting frames of a video where the time taken to decode each frame may be highly variable.

  Read more →
• 

  Eugene Goostman

  Eugene Goostman is a chatbot that some regard as having passed the Turing test, a test of a computer's ability to communicate indistinguishably from a human. Developed in Saint Petersburg in 2001 by a group of three programmers, the Russian-born Vladimir Veselov, Ukrainian-born Eugene Demchenko, and Russian-born Sergey Ulasen, Goostman is portrayed as a 13-year-old Ukrainian boy—characteristics that are intended to induce forgiveness in those with whom it interacts for its grammatical errors and lack of general knowledge. The Goostman bot has competed in a number of Turing test contests since its creation, and finished second in the 2005 and 2008 Loebner Prize contest. In June 2012, at an event marking what would have been the 100th birthday of the test's author, Alan Turing, Goostman won a competition promoted as the largest-ever Turing test contest, in which it successfully convinced 29% of its judges that it was human. On 7 June 2014, at a contest marking the 60th anniversary of Turing's death, 33% of the event's judges thought that Goostman was human; the event's organiser Kevin Warwick considered it to have passed Turing's test as a result, per Turing's prediction in his 1950 paper "Computing Machinery and Intelligence", that by the year 2000, machines would be capable of fooling 30% of human judges after five minutes of questioning. The validity and relevance of the announcement of Goostman's pass was questioned by critics, who noted the exaggeration of the achievement by Warwick, the bot's use of personality quirks and humour in an attempt to misdirect users from its non-human tendencies and lack of real intelligence, along with "passes" achieved by other chatbots at similar events. == Personality == Eugene Goostman is portrayed as being a 13-year-old boy from Odesa, Ukraine, who has a pet guinea pig and a father who is a gynaecologist. Veselov stated that Goostman was designed to be a "character with a believable personality". The choice of age was intentional, as, in Veselov's opinion, a thirteen-year-old is "not too old to know everything and not too young to know nothing". Goostman's young age also induces people who "converse" with him to forgive minor grammatical errors in his responses. In 2014, work was made on improving the bot's "dialog controller", allowing Goostman to output more human-like dialogue. A conversation between Scott Aaronson and Eugene Goostman ran as follows: == Competitions == Eugene Goostman has competed in a number of Turing test competitions, including the Loebner Prize contest; it finished joint second in the Loebner test in 2001, and came second to Jabberwacky in 2005 and to Elbot in 2008. On 23 June 2012, Goostman won a Turing test competition at Bletchley Park in Milton Keynes, held to mark the centenary of its namesake, Alan Turing. The competition, which featured five bots, twenty-five hidden humans, and thirty judges, was considered to be the largest-ever Turing test contest by its organizers. After a series of five-minute-long text conversations, 29% of the judges were convinced that the bot was an actual human. === 2014 "pass" === On 7 June 2014, in a Turing test competition at the Royal Society, organised by Kevin Warwick of the University of Reading to mark the 60th anniversary of Turing's death, Goostman won after 33% of the judges were convinced that the bot was human. 30 judges took part in the event, which included Lord Sharkey, a sponsor of Turing's posthumous pardon, artificial intelligence Professor Aaron Sloman, Fellow of the Royal Society Mark Pagel and Red Dwarf actor Robert Llewellyn. Each judge partook in a textual conversation with each of the five bots; at the same time, they also conversed with a human. In all, a total of 300 conversations were conducted. In Warwick's view, this made Goostman the first machine to pass a Turing test. In a press release, he added that: Some will claim that the Test has already been passed. The words Turing Test have been applied to similar competitions around the world. However this event involved more simultaneous comparison tests than ever before, was independently verified and, crucially, the conversations were unrestricted. A true Turing Test does not set the questions or topics prior to the conversations. In his 1950 paper "Computing Machinery and Intelligence", Turing predicted that by the year 2000, computer programs would be sufficiently advanced that the average interrogator would, after five minutes of questioning, "not have more than 70 per cent chance" of correctly guessing whether they were speaking to a human or a machine. Although Turing phrased this as a prediction rather than a "threshold for intelligence", commentators believe that Warwick had chosen to interpret it as meaning that if 30% of interrogators were fooled, the software had "passed the Turing test". ==== Reactions ==== Warwick's claim that Eugene Goostman was the first ever chatbot to pass a Turing test was met with scepticism; critics acknowledged similar "passes" made in the past by other chatbots under the 30% criteria, including PC Therapist in 1991 (which tricked 5 of 10 judges, 50%), and at the Techniche festival in 2011, where a modified version of Cleverbot tricked 59.3% of 1334 votes (which included the 30 judges, along with an audience). Cleverbot's developer, Rollo Carpenter, argued that Turing tests can only prove that a machine can "imitate" intelligence rather than show actual intelligence. Gary Marcus was critical of Warwick's claims, arguing that Goostman's "success" was only the result of a "cleverly-coded piece of software", going on to say that "it's easy to see how an untrained judge might mistake wit for reality, but once you have an understanding of how this sort of system works, the constant misdirection and deflection becomes obvious, even irritating. The illusion, in other words, is fleeting." While acknowledging IBM's Deep Blue and Watson projects—single-purpose computer systems meant for playing chess and the quiz show Jeopardy! respectively—as examples of computer systems that show a degree of intelligence in their specialised field, he further argued that they were not an equivalent to a computer system that shows "broad" intelligence, and could—for example, watch a television programme and answer questions on its content. Marcus stated that "no existing combination of hardware and software can learn completely new things at will the way a clever child can." However, he still believed that there were potential uses for technology such as that of Goostman, specifically suggesting the creation of "believable", interactive video game characters. Imperial College London professor Murray Shanahan questioned the validity and scientific basis of the test, stating that it was "completely misplaced, and it devalues real AI research. It makes it seem like science fiction AI is nearly here, when in fact it's not and it's incredibly difficult." Mike Masnick, editor of the blog Techdirt, was also skeptical, questioning publicity blunders such as the five chatbots being referred to in press releases as "supercomputers", and saying that "creating a chatbot that can fool humans is not really the same thing as creating artificial intelligence."

  Read more →
• 

  Wavelet noise

  Wavelet noise is an alternative to Perlin noise which reduces the problems of aliasing and detail loss that are encountered when Perlin noise is summed into a fractal. == Algorithm detail == The basic algorithm for 2-dimensional wavelet noise is as follows: Create an image, R {\displaystyle R} , filled with uniform white noise. Downsample R {\displaystyle R} to half-size to create R ↓ {\displaystyle R^{\downarrow }} , then upsample it back up to full size to create R ↓↑ {\displaystyle R^{\downarrow \uparrow }} . Subtract R ↓↑ {\displaystyle R^{\downarrow \uparrow }} from R {\displaystyle R} to create the end result, N {\displaystyle N} . This results in an image that contains all the information that cannot be represented at half-scale. From here, N {\displaystyle N} can be used similarly to Perlin noise to create fractal patterns.

  Read more →
• 

  Key frame

  In animation and filmmaking, a key frame (or keyframe) is a drawing or shot that defines the starting and ending points of a smooth transition. These are called frames because their position in time is measured in frames on a strip of film or on a digital video editing timeline. A sequence of key frames defines which movement the viewer will see, whereas the position of the key frames on the film, video, or animation defines the timing of the movement. Because only two or three key frames over the span of a second do not create the illusion of movement, the remaining frames are filled with "inbetweens". == Use of key frames as a means to change parameters == In software packages that support animation, especially 3D graphics, there are many parameters that can be changed for any one object. One example of such an object is a light. In 3D graphics, lights function similarly to real-world lights. They cause illumination, cast shadows, and create specular highlights. Lights have many parameters, including light intensity, beam size, light color, and the texture cast by the light. Supposing that an animator wants the beam size to change smoothly from one value to another within a predefined period of time, that could be achieved by using key frames. At the start of the animation, a beam size value is set. Another value is set for the end of the animation. Thus, the software program automatically interpolates the two values, creating a smooth transition. == Video editing == In non-linear digital video editing, as well as in video compositing software, a key frame is a frame used to indicate the beginning or end of a change made to a parameter. For example, a key frame could be set to indicate the point at which audio will have faded up or down to a certain level. == Video compression == In video compression, a key frame, also known as an intra-frame, is a frame in which a complete image is stored in the data stream. In video compression, only changes that occur from one frame to the next are stored in the data stream, in order to greatly reduce the amount of information that must be stored. This technique capitalizes on the fact that most video sources (such as a typical movie) have only small changes in the image from one frame to the next. Whenever a drastic change to the image occurs, such as when switching from one camera shot to another or at a scene change, a key frame must be created. The entire image for the frame must be output when the visual difference between the two frames is so great that representing the new image incrementally from the previous frame would require more data than recreating the whole image. Because video compression only stores incremental changes between frames (except for key frames), it is not possible to fast-forward or rewind to any arbitrary spot in the video stream. That is because the data for a given frame only represents how that frame was different from the preceding one. For that reason, it is beneficial to include key frames at arbitrary intervals while encoding video. For example, a key frame may be output once for each 10 seconds of video, even though the video image does not change enough visually to warrant the automatic creation of the key frame. That would allow seeking within the video stream at a minimum of 10-second intervals. The downside is that the resulting video stream will be larger in disk size because many key frames are added when they are not necessary for the frame's visual representation. This drawback, however, does not produce significant compression loss when the bitrate is already set at a high value for better quality (as in the DVD MPEG-2 format).

  Read more →
• 

  Lost Art-Database

  The Lost Art-Datenbank is an online database published by the German Lost Art Foundation (Deutsches Zentrum Kulturgutverluste. It contains information on cultural objects looted from Jewish collectors or transferred due to Nazi persecution during the Nazi era. Until 2015, it was managed by the Koordinierungsstelle für Kulturgutverluste (Magdeburg Coordination Office). == Creation == Following the Washington Conference of 1998, and the commitments to provide more transparency regarding looted art, Germany launched the Lost Art Database in 2000 order to help Holocaust victims and their families track down artworks that had been looted from them or lost due to Nazi persecution. == Functionality == The Lost Art Database lists art and books and other cultural objects that were lost, seized, stolen or forceably sold during the Nazi era. The database is divided into search requests from victims' families, heirs or institutions and "found" reports from cultural institutions on items with unresolved provenance gaps from the Nazi periods. The section on reports of finds lists objects that are known to have been unlawfully seized or relocated as a result of the war. In addition, reports are published here on cultural objects for which an uncertain or incomplete provenance may indicate a possible unlawful seizure or war-related relocation. The publication of reports in the Lost Art Internet Database is carried out on behalf of and with the consent of the reporting persons and institutions. The responsibility for the content of the reports lies with these legal or natural persons. There have been controversies over which items should be included in the database. Lost Art is based on the Washington Principles adopted in 1998, which Germany has committed itself to implementing (Joint Declaration, 1999). The Lost Art Database is considered a key resource in the search for looted art and the victims of persecution. Every item in the Lost Art Database has an identifier, known as a Lost Art ID. Proveana is the linked research database. == Other lost art databases == Other countries have launched databases to help identify Nazi looted art. Each database has its own area of focus. The German Lost Art Database allows families or heirs to submit information. Other countries have databases that focus on looted artworks that have not been found or artworks that were repatriated to the national authorities after the defeat of the Nazis but were never returned to their original owners. Other databases have been created for stolen antiquities, looted art from colonial era, art stolen from Syria, Iraq, Ukraine, or from museums or collectors.

  Read more →
• 

  Cloud manufacturing

  Cloud manufacturing (CMfg) is a new manufacturing paradigm developed from existing advanced manufacturing models (e.g., ASP, AM, NM, MGrid) and enterprise information technologies under the support of cloud computing, Internet of Things (IoT), virtualization and service-oriented technologies, and advanced computing technologies. It transforms manufacturing resources and manufacturing capabilities into manufacturing services, which can be managed and operated in an intelligent and unified way to enable the full sharing and circulating of manufacturing resources and manufacturing capabilities. CMfg can provide safe and reliable, high quality, cheap and on-demand manufacturing services for the whole lifecycle of manufacturing. The concept of manufacturing here refers to big manufacturing that includes the whole lifecycle of a product (e.g. design, simulation, production, test, maintenance). The concept of Cloud manufacturing was initially proposed by the research group led by Prof. Bo Hu Li and Prof. Lin Zhang in China in 2010. Related discussions and research were conducted hereafter, and some similar definitions (e.g. Cloud-Based Design and Manufacturing (CBDM). ) to cloud manufacturing were introduced. Cloud manufacturing is a type of parallel, networked, and distributed system consisting of an integrated and inter-connected virtualized service pool (manufacturing cloud) of manufacturing resources and capabilities as well as capabilities of intelligent management and on-demand use of services to provide solutions for all kinds of users involved in the whole lifecycle of manufacturing. == Types == Cloud Manufacturing can be divided into two categories. The first category concerns deploying manufacturing software on the Cloud, i.e. a “manufacturing version” of Computing. CAx software can be supplied as a service on the Manufacturing Cloud (MCloud). The second category has a broader scope, cutting across production, management, design and engineering abilities in a manufacturing business. Unlike with computing and data storage, manufacturing involves physical equipment, monitors, materials and so on. In this kind of Cloud Manufacturing system, both material and non-material facilities are implemented on the Manufacturing Cloud to support the whole supply chain. Costly resources are shared on the network. This means that the utilisation rate of rarely used equipment rises and the cost of expensive equipment is reduced. According to the concept of Cloud technology, there will not be direct interaction between Cloud Users and Service Providers. The Cloud User should neither manage nor control the infrastructure and manufacturing applications. As a matter of fact, the former can be considered part of the latter. In CMfg system, various manufacturing resources and abilities can be intelligently sensed and connected into wider Internet, and automatically managed and controlled using IoT technologies (e.g., RFID, wired and wireless sensor network, embedded system). Then the manufacturing resources and abilities are virtualized and encapsulated into different manufacturing cloud services (MCSs), that can be accessed, invoked, and deployed based on knowledge by using virtualization technologies, service-oriented technologies, and cloud computing technologies. The MCSs are classified and aggregated according to specific rules and algorithms, and different kinds of manufacturing clouds are constructed. Different users can search and invoke the qualified MCSs from related manufacturing cloud according to their needs, and assemble them to be a virtual manufacturing environment or solution to complete their manufacturing task involved in the whole life cycle of manufacturing processes under the support of cloud computing, service-oriented technologies, and advanced computing technologies. Four types of cloud deployment modes (public, private, community and hybrid clouds) are ubiquitous as a single point of access. Private cloud refers to a centralized management effort in which manufacturing services are shared within one company or its subsidiaries. Enterprises' mission-critical and core-business applications are often kept in a private cloud. Community cloud is a collaborative effort in which manufacturing services are shared between several organizations from a specific community with common concerns. Public cloud realizes the key concept of sharing services with the general public in a multi-tenant environment. Hybrid cloud is a composition of two or more clouds (private, community or public) that remain distinct entities but are also bound together, offering the benefits of multiple deployment modes. == Resources == From the resource’s perspective, each kind of manufacturing capability requires support from the related manufacturing resource. For each type of manufacturing capability, its related manufacturing resource comes in two forms, soft resources and hard resources. === Soft resources === Software: software applications throughout the product lifecycle including design, analysis, simulation, process planning, and are only beginning to be embraced by the electronics manufacturing industry. Knowledge: experience and know-how needed to complete a production task, i.e. engineering knowledge, product models, standards, evaluation procedures and results, customer feedback, and manufacturing in the cloud provides just as many solutions as the number of questions it also raises for manufacturing executives wanting to make the best possible decision. Skill: expertise in performing a specific manufacturing task. Personnel: human resource engaged in the manufacturing process, i.e. designers, operators, managers, technicians, project teams, customer service, etc. Experience: performance, quality, client evaluation, etc. Business Network: business relationships and business opportunity networks that exist in an enterprise. === Hard resources === Manufacturing Equipment: facilities needed for completing a manufacturing task, e.g. machine tools, cutters, test and monitoring equipment and other fabrication tools. Monitoring/Control Resource: devices used to identify and control other manufacturing resource, for instance, RFID (Radio-Frequency IDentification), WSN (Wireless Sensor Network), virtual managers and remote controllers. Computational Resource: computing devices to support production process, e.g. servers, computers, storage media, control devices, etc. Materials: inputs and outputs in a production system, e.g. raw material, product-in-progress, finished product, power, water, lubricants, etc. Storage: automated storage and retrieval systems, logic controllers, location of warehouses, volume capacity and schedule/optimization methods. Transportation: movement of manufacturing inputs/outputs from one location to another. It includes the modes of transport, e.g. air, rail, road, water, cable, pipeline and space, and the related price, and time taken.

  Read more →
• 

  Hekaton (database)

  Hekaton (also known as SQL Server In-Memory OLTP) is an in-memory database for OLTP workloads built into Microsoft SQL Server. Hekaton was designed in collaboration with Microsoft Research and was released in SQL Server 2014. Traditional RDBMS systems were designed when memory resources were expensive, and were optimized for disk storage. Hekaton is instead optimized for a working set stored entirely in main memory, but is still accessible via T-SQL like normal tables. It is fundamentally different from the "DBCC PINTABLE" feature in earlier SQL Server versions. Hekaton was announced at the Professional Association for SQL Server (PASS) conference 2012.

  Read more →
• 

  Ibotta

  Ibotta, Inc. is an American mobile technology company headquartered in Denver, Colorado. Founded in 2011, the company offers cash back rewards on various purchases through its Ibotta Performance Network and direct to consumer app. Ibotta partners with CPG (consumer packaged goods) brands and network publishers to provide these rewards. As of 2024, the company operates solely in the United States. The company's rewards-as-a-service offering, the Ibotta Performance Network, went live in 2022. In August 2019, Ibotta received a $1 billion valuation after its Series D funding, and in 2023, the company surpassed $1.5 billion cash rewards paid to over 50 million consumers since the company's founding. Ibotta became a publicly traded company in April 2024 with a listing on the New York Stock Exchange. As of September 2025, Ibotta is trading at approximately $27.13 per share, marking a 69% decline from its initial public offering price of $88 per share on April 18, 2024. == History == === Founding through early 2019 === Ibotta was founded by current CEO Bryan Leach. The company was incorporated in 2011 and the app launched to both the App Store and Google Play stores in 2012. Early investors included entrepreneur and computer scientist Jim Clark and Tom “TJ” Jermoluk, Chairman of @Home Network. In 2015, Ibotta expanded beyond item level grocery, adding the ability to get cash back on in-store retail purchases. In 2016, in-app mobile commerce began, allowing users to navigate from the Ibotta app to its partners' apps to earn cash back on purchases. In 2016 with a Series C investment, Ibotta had raised over $73 million in funding. In March of that year, Ibotta partnered with Anheuser-Busch to offer cash back for adults who purchased its products. In May, the company partnered with LiveRamp so that companies could use their CRM data to create segmented, personalized campaigns. At the time, the company had around 200 full- and part-time employees and moved from offices in Lower Downtown Denver (LoDo) to a 40,000-square-foot office in the central Denver business district. A year later, the company had to expand to a second floor as it added almost another 100 employees. In 2017, Ibotta added cash back for Uber to its app as well as cash back rewards for online and mobile purchases. In 2018, Ibotta was listed on the Inc. 5,000 list as one of the fastest growing private companies in the U.S. A year later, in January 2019, the Ibotta app had been downloaded more than 30 million times with users receiving a reported $500 million in cash back rewards. That year, Ibotta was the largest mobile company in Colorado with six million monthly active users. === August 2019 to present === In August 2019, Ibotta was valued at $1 billion, following a Series D round of funding. The round was led by Koch Disruptive Technologies, a subsidiary of Koch Industries. 2019 was also the year the company introduced Pay with Ibotta, which allowed users to complete purchases at key retailers on the Ibotta app and earn instant cash back in the process. With that new service, users were able to enter their purchase total and use a QR code to checkout and receive immediate cash back. In 2020, the company partnered with Trees for the Future to plant up to 1 million trees as part of an Earth Month campaign to raise awareness about the waste of unused paper coupons. In response to the COVID-19 pandemic, Ibotta partnered with CPG brands in their “Here to Help” campaign and together committed over $10 million in cash back to American consumers. The company added the ability to earn cash back from online grocery pick-up and delivery orders. Later that year, Ibotta started its free Thanksgiving program, providing users with 100% cash back on select groceries needed for a Thanksgiving meal. By 2022, the company had provided approximately 10 million Thanksgiving meals. In 2021, Ibotta acquired the company OctoShop (originally InStok), a shopping browser extension company. The OctoShop app enables users to compare prices across stores and set restock and price-drop alerts. In April 2022, the Ibotta Performance Network (IPN) was launched. The IPN allows brands to deliver digital offers to consumers through third party publishers. Retailers including Walmart, Dollar General and Family Dollar, food delivery services including Instacart, and convenience stores including Shell are all part of the Ibotta Performance Network. This pay-per-sales or success-based performance network reaches over 200 million consumers. On April 18, 2024, Ibotta had its initial public offering (IPO), trading on the New York Stock Exchange (NYSE) under the ticker symbol IBTA. It was the largest technology IPO in Colorado history. In October 2025, Ibotta announced a partnership with technology and analytics company Circana, integrating Circana's Household Lift measurement into Ibotta campaigns to give CPG brands an increased understanding of the impact of their promotional campaigns. On November 3, 2025, Ibotta launched LiveLift, a tool for companies to measure the return on investment of digital promotions, in order to optimize performance marketing goals. === Athletic partnerships === Ibotta became the official jersey patch partner of the New Orleans Pelicans, a professional men's basketball team in the National Basketball Association (NBA), for the 2020–2021 and 2023–2024 seasons. Ibotta became the official jersey patch partner of the 2023 NBA champion Denver Nuggets baskeetball team beginning in the 2023–2024 season. In March 2023, F1 driver Logan Sargeant, the first U.S. racer to compete in F1 since 2015, partnered with Ibotta. The Ibotta logo was displayed on Sargeant's racing helmet throughout his F1 career. In June 2023, UConn Huskies women's basketball player Paige Bueckers entered into a "name, image, and likeness" (NIL) promotional agreement with Ibotta. According to a press release by Ibotta, the company has agreements with The Brandr Group, which finds NIL opportunities for women college athletes, and the Pearpop social media marketing platform to promote Ibotta. == Legal issues == In April 2025, shareholders filed a class action lawsuit—Fortune v. Ibotta, Inc., in the U.S. District Court for the District of Colorado (Case No. 25-cv-01213)—alleging that the registration statement in connection with Ibotta’s April 2024 initial public offering omitted material information. The complaint claims that, although Ibotta disclosed detailed terms for its contract with Walmart Inc., it failed to warn investors that its agreement with The Kroger Co., its second-largest client, was terminable at will and thus could be canceled without warning, creating a misleading impression of stability.

  Read more →
• 

  Geofence warrant

  A geofence warrant or a reverse location warrant is a search warrant issued by a court to allow law enforcement to search a database to find all active mobile devices within a particular geo-fence area. Courts have granted law enforcement geo-fence warrants to obtain information from databases such as Google's Sensorvault, which collects users' historical geolocation data. Geo-fence warrants are a part of a category of warrants known as reverse search warrants. == History == Geofence warrants were first used in 2016. Google reported that it had received 982 such warrants in 2018, 8,396 in 2019, and 11,554 in 2020. A 2021 transparency report showed that 25% of data requests from law enforcement to Google were geo-fence data requests. Google is the most common recipient of geo-fence warrants and the main provider of such data, although companies including Apple, Snapchat, Lyft, and Uber have also received such warrants. == Legality == === United States === Some lawyers and privacy experts believe reverse search warrants are unconstitutional under the Fourth Amendment to the United States Constitution, which protects people from unreasonable searches and seizures, and requires any search warrants be specific to what and to whom they apply. The Fourth Amendment specifies that warrants may only be issued "upon probable cause, supported by Oath or affirmation, and particularly describing the place to be searched, and the persons or things to be seized." Some lawyers, legal scholars, and privacy experts have likened reverse search warrants to general warrants, which were made illegal by the Fourth Amendment. Groups including the Electronic Frontier Foundation have opposed geo-fence warrants in amicus briefs filed in motions to quash such orders to disclose geo-fence data. In 2024, a panel of the United States Fourth Circuit Court of Appeals considered data acquired from Google’s Sensorvault not to be a search, but non-private business records when users opt-in to Google’s location history. However, upon a rehearing en banc, the Court vacated that decision. In April 2025, the full Court affirmed the judgment solely on the 'good faith' exception, leaving the underlying constitutional question of whether geofence warrants constitute a search unsettled in the Circuit. However, the United States Fifth Circuit Court of Appeals found that geofence warrants are "categorically prohibited by the Fourth Amendment." The split in Circuits prompted the United States Supreme Court to agree to hear Chatrie v. United States in January 2026.

  Read more →
• 

  Highway network

  In machine learning, the Highway Network was the first working very deep feedforward neural network with hundreds of layers, much deeper than previous neural networks. It uses skip connections modulated by learned gating mechanisms to regulate information flow, inspired by long short-term memory (LSTM) recurrent neural networks. The advantage of the Highway Network over other deep learning architectures is its ability to overcome or partially prevent the vanishing gradient problem, thus improving its optimization. Gating mechanisms are used to facilitate information flow across the many layers ("information highways"). Highway Networks have found use in text sequence labeling and speech recognition tasks. In 2014, the state of the art was training deep neural networks with 20 to 30 layers. Stacking too many layers led to a steep reduction in training accuracy, known as the "degradation" problem. In 2015, two techniques were developed to train such networks: the Highway Network (published in May), and the residual neural network, or ResNet (December). ResNet behaves like an open-gated Highway Net. == Model == The model has two gates in addition to the H ( W H , x ) {\displaystyle H(W_{H},x)} gate: the transform gate T ( W T , x ) {\displaystyle T(W_{T},x)} and the carry gate C ( W C , x ) {\displaystyle C(W_{C},x)} . The latter two gates are non-linear transfer functions (specifically sigmoid by convention). The function H {\displaystyle H} can be any desired transfer function. The carry gate is defined as: C ( W C , x ) = 1 − T ( W T , x ) {\displaystyle C(W_{C},x)=1-T(W_{T},x)} while the transform gate is just a gate with a sigmoid transfer function. == Structure == The structure of a hidden layer in the Highway Network follows the equation: y = H ( x , W H ) ⋅ T ( x , W T ) + x ⋅ C ( x , W C ) = H ( x , W H ) ⋅ T ( x , W T ) + x ⋅ ( 1 − T ( x , W T ) ) {\displaystyle {\begin{aligned}y=H(x,W_{H})\cdot T(x,W_{T})+x\cdot C(x,W_{C})\\=H(x,W_{H})\cdot T(x,W_{T})+x\cdot (1-T(x,W_{T}))\end{aligned}}} == Related work == Sepp Hochreiter analyzed the vanishing gradient problem in 1991 and attributed to it the reason why deep learning did not work well. To overcome this problem, Long Short-Term Memory (LSTM) recurrent neural networks have residual connections with a weight of 1.0 in every LSTM cell (called the constant error carrousel) to compute y t + 1 = F ( x t ) + x t {\textstyle y_{t+1}=F(x_{t})+x_{t}} . During backpropagation through time, this becomes the residual formula y = F ( x ) + x {\textstyle y=F(x)+x} for feedforward neural networks. This enables training very deep recurrent neural networks with a very long time span t. A later LSTM version published in 2000 modulates the identity LSTM connections by so-called "forget gates" such that their weights are not fixed to 1.0 but can be learned. In experiments, the forget gates were initialized with positive bias weights, thus being opened, addressing the vanishing gradient problem. As long as the forget gates of the 2000 LSTM are open, it behaves like the 1997 LSTM. The Highway Network of May 2015 applies these principles to feedforward neural networks. It was reported to be "the first very deep feedforward network with hundreds of layers". It is like a 2000 LSTM with forget gates unfolded in time, while the later Residual Nets have no equivalent of forget gates and are like the unfolded original 1997 LSTM. If the skip connections in Highway Networks are "without gates," or if their gates are kept open (activation 1.0), they become Residual Networks. The residual connection is a special case of the "short-cut connection" or "skip connection" by Rosenblatt (1961) and Lang & Witbrock (1988) which has the form x ↦ F ( x ) + A x {\displaystyle x\mapsto F(x)+Ax} . Here the randomly initialized weight matrix A does not have to be the identity mapping. Every residual connection is a skip connection, but almost all skip connections are not residual connections. The original Highway Network paper not only introduced the basic principle for very deep feedforward networks, but also included experimental results with 20, 50, and 100 layers networks, and mentioned ongoing experiments with up to 900 layers. Networks with 50 or 100 layers had lower training error than their plain network counterparts, but no lower training error than their 20 layers counterpart (on the MNIST dataset, Figure 1 in ). No improvement on test accuracy was reported with networks deeper than 19 layers (on the CIFAR-10 dataset; Table 1 in ). The ResNet paper, however, provided strong experimental evidence of the benefits of going deeper than 20 layers. It argued that the identity mapping without modulation is crucial and mentioned that modulation in the skip connection can still lead to vanishing signals in forward and backward propagation (Section 3 in ). This is also why the forget gates of the 2000 LSTM were initially opened through positive bias weights: as long as the gates are open, it behaves like the 1997 LSTM. Similarly, a Highway Net whose gates are opened through strongly positive bias weights behaves like a ResNet. The skip connections used in modern neural networks (e.g., Transformers) are dominantly identity mappings.

  Read more →
• 

  Confidential computing

  Confidential computing is a security and privacy-enhancing computational technique focused on protecting data in use. Confidential computing can be used in conjunction with storage and network encryption, which protect data at rest and data in transit respectively. It is designed to address software, protocol, cryptographic, and basic physical and supply-chain attacks, although some critics have demonstrated architectural and side-channel attacks effective against the technology. The technology protects data in use by performing computations in a hardware-based trusted execution environment (TEE). Confidential data is released to the TEE only once it is assessed to be trustworthy. Different types of confidential computing define the level of data isolation used, whether virtual machine, application, or function, and the technology can be deployed in on-premise data centers, edge locations, or the public cloud. It is often compared with other privacy-enhancing computational techniques such as fully homomorphic encryption, secure multi-party computation, and Trusted Computing. Confidential computing is promoted by the Confidential Computing Consortium (CCC) industry group, whose membership includes major providers of the technology. == Properties == Trusted execution environments (TEEs) "prevent unauthorized access or modification of applications and data while they are in use, thereby increasing the security level of organizations that manage sensitive and regulated data". Trusted execution environments can be instantiated on a computer's processing components such as a central processing unit (CPU) or a graphics processing unit (GPU). In their various implementations, TEEs can provide different levels of isolation including virtual machine, individual application, or compute functions. Typically, data in use in a computer's compute components and memory exists in a decrypted state and can be vulnerable to examination or tampering by unauthorized software or administrators. According to the CCC, confidential computing protects data in use through a minimum of three properties: Data confidentiality: "Unauthorized entities cannot view data while it is in use within the TEE". Data integrity: "Unauthorized entities cannot add, remove, or alter data while it is in use within the TEE". Code integrity: "Unauthorized entities cannot add, remove, or alter code executing in the TEE". In addition to trusted execution environments, remote cryptographic attestation is an essential part of confidential computing. The attestation process assesses the trustworthiness of a system and helps ensure that confidential data is released to a TEE only after it presents verifiable evidence that it is genuine and operating with an acceptable security posture. It allows the verifying party to assess the trustworthiness of a confidential computing environment through an "authentic, accurate, and timely report about the software and data state" of that environment. "Hardware-based attestation schemes rely on a trusted hardware component and associated firmware to execute attestation routines in a secure environment". Without attestation, a compromised system could deceive others into trusting it, claim it is running certain software in a TEE, and potentially compromise the confidentiality or integrity of the data being processed or the integrity of the trusted code. == Technical approaches == Technical approaches to confidential computing may vary in which software, infrastructure and administrator elements are allowed to access confidential data. The "trust boundary," which circumscribes a trusted computing base (TCB), defines which elements have the potential to access confidential data, whether they are acting benignly or maliciously. Confidential computing implementations enforce the defined trust boundary at a specific level of data isolation. The three main types of confidential computing are: Virtual machine isolation Application isolation, also known as process isolation Function isolation, also known as library isolation Virtual machine isolation removes the elements controlled by the computer infrastructure or cloud provider, but allows potential data access by elements inside a virtual machine running on the infrastructure. Application or process isolation permits data access only by authorized software applications or processes. Function or library isolation is designed to permit data access only by authorized subroutines or modules within a larger application, blocking access by any other system element, including unauthorized code in the larger application. == Threat model == As confidential computing is concerned with the protection of data in use, only certain threat models can be addressed by this technique. Other types of attacks are better addressed by other privacy-enhancing technologies. === In scope === The following threat vectors are generally considered in scope for confidential computing: Software attacks: including attacks on the host’s software and firmware. This may include the operating system, hypervisor, BIOS, other software and workloads. Protocol attacks: including "attacks on protocols associated with attestation as well as workload and data transport". This includes vulnerabilities in the "provisioning or placement of the workload" or data that could cause a compromise. Cryptographic attacks: including "vulnerabilities found in ciphers and algorithms due to a number of factors, including mathematical breakthroughs, availability of computing power and new computing approaches such as quantum computing". The CCC notes several caveats in this threat vector, including relative difficulty of upgrading cryptographic algorithms in hardware and recommendations that software and firmware be kept up-to-date. A multi-faceted, defense-in-depth strategy is recommended as a best practice. Basic physical attacks: including cold boot attacks, bus and cache snooping and plugging attack devices into an existing port, such as a PCI Express slot or USB port. Basic upstream supply-chain attacks: including attacks that would compromise TEEs through changes such as added debugging ports. The degree and mechanism of protection against these threats varies with specific confidential computing implementations. === Out of scope === Threats generally defined as out of scope for confidential computing include: Sophisticated physical attacks: including physical attacks that "require long-term and/or invasive access to hardware" such as chip scraping techniques and electron microscope probes. Upstream hardware supply-chain attacks: including attacks on the CPU manufacturing process, CPU supply chain in key injection/generation during manufacture. Attacks on components of a host system that are not directly providing the capabilities of the trusted execution environment are also generally out-of-scope. Availability attacks: confidential computing is designed to protect the confidentiality and integrity of protected data and code. It does not address availability attacks such as Denial of Service or Distributed Denial of Service attacks. == Use cases == Confidential computing can be deployed in the public cloud, on-premise data centers, or distributed "edge" locations, including network nodes, branch offices, industrial systems and others. === Data privacy and security === Confidential computing protects the confidentiality and integrity of data and code from the infrastructure provider, unauthorized or malicious software and system administrators, and other cloud tenants, which may be a concern for organizations seeking control over sensitive or regulated data. The additional security capabilities offered by confidential computing can help accelerate the transition of more sensitive workloads to the cloud or edge locations. === Multi-party analytics === Confidential computing can enable multiple parties to engage in joint analysis using confidential or regulated data inside a TEE while preserving privacy and regulatory compliance. In this case, all parties benefit from the shared analysis, but no party's sensitive data or confidential code is exposed to the other parties or system host. Examples include multiple healthcare organizations contributing data to medical research, or multiple banks collaborating to identify financial fraud or money laundering. Oxford University researchers proposed the alternative paradigm called "Confidential Remote Computing" (CRC), which supports confidential operations in Trusted Execution Environments across endpoint computers considering multiple stakeholders as mutually distrustful data, algorithm and hardware providers. === Confidential generative AI === Confidential computing technologies can be applied to various stages of a generative AI deployments to help increase data or model privacy, security, and regulatory compliance. TEEs and remote attestation can protect the integrity of data during AI model training, keep

  Read more →
• 

  Soterml

  SoTerML (Soil and Terrain Markup Language) is a XML-based markup language for storing and exchanging soil and terrain related data. SoTerML development is being done within The e-SoTer Platform. GEOSS plans a global Earth Observation System and, within this framework, the e-SOTER project addresses the felt need for a global soil and terrain database. The Centre for Geospatial Science (Currently Nottingham Geospatial Institute) at the University of Nottingham has initiated the development since January 2009. Further development and maintenance is currently handled in National Soil Resources Institute (NSRI) at Cranfield University, UK. The role of CGS is within the development of the e-SOTER dissemination platform, which is based on INSPIRE principles. The SoTerML development included: 1. Development of a data dictionary for nomenclatures and various data sources (data and metadata). 2. Development of an exchange format/procedures from the World Reference Base 2006.

  Read more →