AI Tools For Ecommerce

AI Tools For Ecommerce — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Sprite multiplexing

  Sprite multiplexing is a computer graphics technique where additional sprites (moving images) can be drawn on the screen, beyond the nominal maximum. It is largely historical, applicable principally to older hardware, where limited resources (such as CPU speed and memory) meant only a relatively small number of sprites were supported. On the other hand, it is also true that without multiplexing, the sprite circuitry would be idle much of the time, and limited resources were wasted. == Description == The sprite multiplexing technique is based on the idea that while the hardware may only support a finite number of sprites, it is sometimes possible to re-use the same sprite "slots" more than once per frame or scan line. The program will first use the hardware to draw one or more sprite(s), as normal. Before the next frame (or next scanline) needs to be drawn, the software reprograms the hardware to display additional sprites, in other positions. For example, the Nintendo Entertainment System explicitly supports hardware sprite multiplexing, where it has 64 hardware sprites, but is only capable of rendering 8 of them per scanline. On the older Atari 2600, sprite multiplexing was not intentionally designed in, but programmers discovered they could reset the TIA graphics chip to draw additional sprites on the same scanline. The sprite multiplexing technique relies on the program being able to identify what part of the video screen is being drawn at the moment, or being triggered by the video hardware to run a subroutine at the crucial moment. The programmer must carefully consider the layout of the screen. If the video graphics hardware is not reprogrammed in time for the extra sprites to be displayed, they will not appear, or will be drawn incorrectly. Modern video graphics hardware typically does not use hardware sprites, since modern computer systems do not have the kind of limitations that sprite hardware is designed to circumvent. == Implementations == Systems that allow the programmer to employ the sprite multiplexing technique include: Atari 2600 Atari 8-bit computers Amiga Commodore 64 MSX Nintendo Entertainment System Super Nintendo Entertainment System Master System Sega Genesis/Mega Drive

  Read more →
• 

  Digital artifact

  Digital artifact in information science, is any undesired or unintended alteration in data introduced in a digital process by an involved technique and/or technology. Digital artifact can be of any content types including text, audio, video, image, animation or a combination. == Information science == In information science, digital artifacts result from: Hardware malfunction: In computer graphics, visual artifacts may be generated whenever a hardware component such as the processor, memory chip, cabling malfunctions, etc., corrupts data. Examples of malfunctions include physical damage, overheating, insufficient voltage and GPU overclocking. Common types of hardware artifacts are texture corruption and T-vertices in 3D graphics, and pixelization in MPEG compressed video. Software malfunction: Artifacts may be caused by algorithm flaws such as decoding/encoding audio or video, or a poor pseudo-random number generator that would introduce artifacts distinguishable from the desired noise into statistical models. Compression: Controlled amounts of unwanted information may be generated as a result of the use of lossy compression techniques. One example is the artifacts seen in JPEG and MPEG compression algorithms that produce compression artifacts. Quantization: Digital imprecision generated in the process of converting analog information into digital space, is due to the limited granularity of digital numbering space. In computer graphics, quantization is seen as pixelation. Aliasing: As a consequence of sampling or sample-rate conversion, energy from frequencies outside of the signal frequency band of interest are folded across multiples of the Nyquist frequency. This is typically mitigated by using an anti-aliasing filter. Filtering: The process of filtering a signal, such as using an anti-aliasing filter, causes undesired alterations to the signal due to imperfections in the frequency response magnitude and phase, and due to the time domain impulse response. Rolling shutter, the line scanning of an object that is moving too fast for the image sensor to capture a unitary image. Error diffusion: poorly-weighted kernel coefficients result in undesirable visual artifacts.

  Read more →
• 

  XOR swap algorithm

  In computer programming, the exclusive or swap (sometimes shortened to XOR swap) is an algorithm that uses the exclusive or bitwise operation to swap the values of two variables without using the temporary variable which is normally required. The algorithm is primarily a novelty and a way of demonstrating properties of the exclusive or operation. It is sometimes discussed as a program optimization, but there are almost no cases where swapping via exclusive or provides benefit over the standard, obvious technique. == The algorithm == Conventional swapping requires the use of a temporary storage variable. Using the XOR swap algorithm, however, no temporary storage is needed. The algorithm is as follows: Since XOR is a commutative operation, either X XOR Y or Y XOR X can be used interchangeably in any of the foregoing three lines. Note that on some architectures the first operand of the XOR instruction specifies the target location at which the result of the operation is stored, preventing this interchangeability. The algorithm typically corresponds to three machine-code instructions, represented by corresponding pseudocode and assembly instructions in the three rows of the following table: In the above System/370 assembly code sample, R1 and R2 are distinct registers, and each XR operation leaves its result in the register named in the first argument. Using x86 assembly, values X and Y are in registers eax and ebx (respectively), and xor places the result of the operation in the first register (Note: x86 supports XCHG instruction so using triple XOR do not make sense on this architecture). In RISC-V assembly, value X and Y are in registers x10 and x11, and xor places the result of the operation in the first operand. However, in the pseudocode or high-level language version or implementation, the algorithm fails if x and y use the same storage location, since the value stored in that location will be zeroed out by the first XOR instruction, and then remain zero; it will not be "swapped with itself". This is not the same as if x and y have the same values. The trouble only comes when x and y use the same storage location, in which case their values must already be equal. That is, if x and y use the same storage location, then the line: sets x to zero (because x = y so X XOR Y is zero) and sets y to zero (since it uses the same storage location), causing x and y to lose their original values. == Proof of correctness == The binary operation XOR over bit strings of length N {\displaystyle N} exhibits the following properties (where ⊕ {\displaystyle \oplus } denotes XOR): L1. Commutativity: A ⊕ B = B ⊕ A {\displaystyle A\oplus B=B\oplus A} L2. Associativity: ( A ⊕ B ) ⊕ C = A ⊕ ( B ⊕ C ) {\displaystyle (A\oplus B)\oplus C=A\oplus (B\oplus C)} L3. Identity exists: there is a bit string, 0, (of length N) such that A ⊕ 0 = A {\displaystyle A\oplus 0=A} for any A {\displaystyle A} L4. Each element is its own inverse: for each A {\displaystyle A} , A ⊕ A = 0 {\displaystyle A\oplus A=0} . Suppose that we have two distinct registers R1 and R2 as in the table below, with initial values A and B respectively. We perform the operations below in sequence, and reduce our results using the properties listed above. === Linear algebra interpretation === As XOR can be interpreted as binary addition and a pair of bits can be interpreted as a vector in a two-dimensional vector space over the field with two elements, the steps in the algorithm can be interpreted as multiplication by 2×2 matrices over the field with two elements. For simplicity, assume initially that x and y are each single bits, not bit vectors. For example, the step: which also has the implicit: corresponds to the matrix ( 1 1 0 1 ) {\displaystyle \left({\begin{smallmatrix}1&1\\0&1\end{smallmatrix}}\right)} as ( 1 1 0 1 ) ( x y ) = ( x + y y ) . {\displaystyle {\begin{pmatrix}1&1\\0&1\end{pmatrix}}{\begin{pmatrix}x\\y\end{pmatrix}}={\begin{pmatrix}x+y\\y\end{pmatrix}}.} The sequence of operations is then expressed as: ( 1 1 0 1 ) ( 1 0 1 1 ) ( 1 1 0 1 ) = ( 0 1 1 0 ) {\displaystyle {\begin{pmatrix}1&1\\0&1\end{pmatrix}}{\begin{pmatrix}1&0\\1&1\end{pmatrix}}{\begin{pmatrix}1&1\\0&1\end{pmatrix}}={\begin{pmatrix}0&1\\1&0\end{pmatrix}}} (working with binary values, so 1 + 1 = 0 {\displaystyle 1+1=0} ), which expresses the elementary matrix of switching two rows (or columns) in terms of the transvections (shears) of adding one element to the other. To generalize to where X and Y are not single bits, but instead bit vectors of length n, these 2×2 matrices are replaced by 2n×2n block matrices such as ( I n I n 0 I n ) . {\displaystyle \left({\begin{smallmatrix}I_{n}&I_{n}\\0&I_{n}\end{smallmatrix}}\right).} These matrices are operating on values, not on variables (with storage locations), hence this interpretation abstracts away from issues of storage location and the problem of both variables sharing the same storage location. == Code example == A C function that implements the XOR swap algorithm: The code first checks if the addresses are distinct and uses a guard clause to exit the function early if they are equal. Without that check, if they were equal, the algorithm would fold to a triple x ^= x resulting in zero. == Reasons for avoidance in practice == On modern CPU architectures, the XOR technique can be slower than using a temporary variable to do swapping. At least on recent x86 CPUs, both by AMD and Intel, moving between registers regularly incurs zero latency. (This is called MOV-elimination.) Even if there is not any architectural register available to use, the XCHG instruction will be at least as fast as the three XORs taken together. Another reason is that modern CPUs strive to execute instructions in parallel via instruction pipelines. In the XOR technique, the inputs to each operation depend on the results of the previous operation, so they must be executed in strictly sequential order, negating any benefits of instruction-level parallelism. === Aliasing === The XOR swap is also complicated in practice by aliasing. If an attempt is made to XOR-swap the contents of some location with itself, the result is that the location is zeroed out and its value lost. Therefore, XOR swapping must not be used blindly in a high-level language if aliasing is possible. This issue does not apply if the technique is used in assembly to swap the contents of two registers. Similar problems occur with call by name, as in Jensen's Device, where swapping i and A[i] via a temporary variable yields incorrect results due to the arguments being related: swapping via temp = i; i = A[i]; A[i] = temp changes the value for i in the second statement, which then results in the incorrect i value for A[i] in the third statement. == Variations == The underlying principle of the XOR swap algorithm can be applied to any operation meeting criteria L1 through L4 above. Replacing XOR by addition and subtraction gives various slightly different, but largely equivalent, formulations. For example: Unlike the XOR swap, this variation requires that the underlying processor or programming language uses a method such as modular arithmetic or bignums to guarantee that the computation of X + Y cannot cause an error due to integer overflow. Therefore, it is seen even more rarely in practice than the XOR swap. However, the implementation of AddSwap above in the C programming language always works even in case of integer overflow, since, according to the C standard, addition and subtraction of unsigned integers follow the rules of modular arithmetic, i. e. are done in the cyclic group Z / 2 s Z {\displaystyle \mathbb {Z} /2^{s}\mathbb {Z} } where s {\displaystyle s} is the number of bits of unsigned int. Indeed, the correctness of the algorithm follows from the fact that the formulas ( x + y ) − y = x {\displaystyle (x+y)-y=x} and ( x + y ) − ( ( x + y ) − y ) = y {\displaystyle (x+y)-((x+y)-y)=y} hold in any abelian group. This generalizes the proof for the XOR swap algorithm: XOR is both the addition and subtraction in the abelian group ( Z / 2 Z ) s {\displaystyle (\mathbb {Z} /2\mathbb {Z} )^{s}} (which is the direct sum of s copies of Z / 2 Z {\displaystyle \mathbb {Z} /2\mathbb {Z} } ). This doesn't hold when dealing with the signed int type (the default for int). Signed integer overflow is an undefined behavior in C and thus modular arithmetic is not guaranteed by the standard, which may lead to incorrect results. The sequence of operations in AddSwap can be expressed via matrix multiplication as: ( 1 − 1 0 1 ) ( 1 0 1 − 1 ) ( 1 1 0 1 ) = ( 0 1 1 0 ) {\displaystyle {\begin{pmatrix}1&-1\\0&1\end{pmatrix}}{\begin{pmatrix}1&0\\1&-1\end{pmatrix}}{\begin{pmatrix}1&1\\0&1\end{pmatrix}}={\begin{pmatrix}0&1\\1&0\end{pmatrix}}} == Application to register allocation == On architectures lacking a dedicated swap instruction, because it avoids the extra temporary register, the XOR swap algorithm is required for optimal register allocatio

  Read more →
• 

  Very large database

  A very large database, (originally written very large data base) or VLDB, is a database that contains a very large amount of data, so much that it can require specialized architectural, management, processing and maintenance methodologies. == Definition == The vague adjectives of very and large allow for a broad and subjective interpretation, but attempts at defining a metric and threshold have been made. Early metrics were the size of the database in a canonical form via database normalization or the time for a full database operation like a backup. Technology improvements have continually changed what is considered very large. One definition has suggested that a database has become a VLDB when it is "too large to be maintained within the window of opportunity… the time when the database is quiet". == Sizes of a VLDB database == There is no absolute amount of data that can be cited. For example, one cannot say that any database with more than 1 TB of data is considered a VLDB. This absolute amount of data has varied over time as computer processing, storage and backup methods have become better able to handle larger amounts of data. That said, VLDB issues may start to appear when 1 TB is approached, and are more than likely to have appeared as 30 TB or so is exceeded. == VLDB challenges == Key areas where a VLDB may present challenges include configuration, storage, performance, maintenance, administration, availability and server resources. === Configuration === Careful configuration of databases that lie in the VLDB realm is necessary to alleviate or reduce issues raised by VLDB databases. === Administration === The complexities of managing a VLDB can increase exponentially for the database administrator as database size increases. === Availability and maintenance === When dealing with VLDB operations relating to maintenance and recovery such as database reorganizations and file copies which were quite practical on a non-VLDB take very significant amounts of time and resources for a VLDB database. In particular it typically infeasible to meet a typical recovery time objective (RTO), the maximum expected time a database is expected to be unavailable due to interruption, by methods which involve copying files from disk or other storage archives. To overcome these issues techniques such as clustering, cloned/replicated/standby databases, file-snapshots, storage snapshots or a backup manager may help achieve the RTO and availability, although individual methods may have limitations, caveats, license, and infrastructure requirements while some may risk data loss and not meet the recovery point objective (RPO). For many systems only geographically remote solutions may be acceptable. ==== Backup and recovery ==== Best practice is for backup and recovery to be architectured in terms of the overall availability and business continuity solution. === Performance === Given the same infrastructure there may typically be a decrease in performance, that is increase in response time as database size increases. Some accesses will simply have more data to process (scan) which will take proportionally longer (linear time); while the indexes used to access data may grow slightly in height requiring perhaps an extra storage access to reach the data (sub-linear time). Other effects can be caching becoming less efficient because proportionally less data can be cached and while some indexes such as the B+ automatically sustain well with growth others such as a hash table may need to be rebuilt. Should an increase in database size cause the number of accessors of the database to increase then more server and network resources may be consumed, and the risk of contention will increase. Some solutions to regaining performance include partitioning, clustering, possibly with sharding, or use of a database machine. ==== Partitioning ==== Partitioning may be able assist the performance of bulk operations on a VLDB including backup and recovery., bulk movements due to information lifecycle management (ILM), reducing contention as well as allowing optimization of some query processing. === Storage === In order to satisfy needs of a VLDB the database storage needs to have low access latency and contention, high throughput, and high availability. === Server resources === The increasing size of a VLDB may put pressure on server and network resources and a bottleneck may appear that may require infrastructure investment to resolve. == Relationship to big data == VLDB is not the same as big data, but the storage aspect of big data may involve a VLDB database. That said some of the storage solutions supporting big data were designed from the start to support large volumes of data, so database administrators may not encounter VLDB issues that older versions of traditional RDBMS's might encounter.

  Read more →
• 

  Screen space ambient occlusion

  Screen space ambient occlusion (SSAO) is a computer graphics technique for efficiently approximating the ambient occlusion effect in real time. It was developed by Vladimir Kajalin while working at Crytek and was used for the first time in 2007 by the video game Crysis, also developed by Crytek. == Implementation == The algorithm is implemented as a pixel shader, analyzing the scene depth buffer which is stored in a texture. For every pixel on the screen, the pixel shader samples the depth values around the current pixel and tries to compute the amount of occlusion from each of the sampled points. In its simplest implementation, the occlusion factor depends only on the depth difference between sampled point and current point. Without additional smart solutions, such a brute force method would require about 200 texture reads per pixel for good visual quality. This is not acceptable for real-time rendering on current graphics hardware. In order to get high quality results with far fewer reads, sampling is performed using a randomly rotated kernel. The kernel orientation is repeated every N screen pixels in order to have only high-frequency noise in the final picture. In the end this high frequency noise is greatly removed by a NxN post-process blurring step taking into account depth discontinuities (using methods such as comparing adjacent normals and depths). Such a solution allows a reduction in the number of depth samples per pixel to about 16 or fewer while maintaining a high quality result, and allows the use of SSAO in soft real-time applications like computer games. Compared to other ambient occlusion solutions, SSAO has the following advantages: Independent from scene complexity. No data pre-processing needed, no loading time and no memory allocations in system memory. Works with dynamic scenes. Works in the same consistent way for every pixel on the screen. No CPU usage – it can be executed completely on the GPU. May be easily integrated into any modern graphics pipeline. SSAO also has the following disadvantages: Rather local and in many cases view-dependent, as it is dependent on adjacent texel depths which may be generated by any geometry whatsoever. Hard to correctly smooth/blur out the noise without interfering with depth discontinuities, such as object edges (the occlusion should not "bleed" onto objects). Because SSAO operates only on the current depth buffer, it can miss occluding geometry that is not rasterized into the z-buffer and may produce undersampling-related artifacts.

  Read more →
• 

  Communication-avoiding algorithm

  Communication-avoiding algorithms minimize movement of data within a memory hierarchy for improving its running-time and energy consumption. These minimize the total of two costs (in terms of time and energy): arithmetic and communication. Communication, in this context refers to moving data, either between levels of memory or between multiple processors over a network. It is much more expensive than arithmetic. == Formal theory == === Two-level memory model === A common computational model in analyzing communication-avoiding algorithms is the two-level memory model: There is one processor and two levels of memory. Level 1 memory is infinitely large. Level 0 memory ("cache") has size M {\displaystyle M} . In the beginning, input resides in level 1. In the end, the output resides in level 1. Processor can only operate on data in cache. The goal is to minimize data transfers between the two levels of memory. === Matrix multiplication === Corollary 6.2: More general results for other numerical linear algebra operations can be found in. The following proof is from. == Motivation == Consider the following running-time model: Measure of computation = Time per FLOP = γ Measure of communication = No. of words of data moved = β ⇒ Total running time = γ·(no. of FLOPs) + β·(no. of words) From the fact that β >> γ as measured in time and energy, communication cost dominates computation cost. Technological trends indicate that the relative cost of communication is increasing on a variety of platforms, from cloud computing to supercomputers to mobile devices. The report also predicts that gap between DRAM access time and FLOPs will increase 100× over coming decade to balance power usage between processors and DRAM. Energy consumption increases by orders of magnitude as we go higher in the memory hierarchy. United States president Barack Obama cited communication-avoiding algorithms in the FY 2012 Department of Energy budget request to Congress: New Algorithm Improves Performance and Accuracy on Extreme-Scale Computing Systems. On modern computer architectures, communication between processors takes longer than the performance of a floating-point arithmetic operation by a given processor. ASCR researchers have developed a new method, derived from commonly used linear algebra methods, to minimize communications between processors and the memory hierarchy, by reformulating the communication patterns specified within the algorithm. This method has been implemented in the TRILINOS framework, a highly-regarded suite of software, which provides functionality for researchers around the world to solve large scale, complex multi-physics problems. == Objectives == Communication-avoiding algorithms are designed with the following objectives: Reorganize algorithms to reduce communication across all memory hierarchies. Attain the lower-bound on communication when possible. The following simple example demonstrates how these are achieved. === Matrix multiplication example === Let A, B and C be square matrices of order n × n. The following naive algorithm implements C = C + A B: for i = 1 to n for j = 1 to n for k = 1 to n C(i,j) = C(i,j) + A(i,k) B(k,j) Arithmetic cost (time-complexity): n2(2n − 1) for sufficiently large n or O(n3). Rewriting this algorithm with communication cost labelled at each step for i = 1 to n {read row i of A into fast memory} - n2 reads for j = 1 to n {read C(i,j) into fast memory} - n2 reads {read column j of B into fast memory} - n3 reads for k = 1 to n C(i,j) = C(i,j) + A(i,k) B(k,j) {write C(i,j) back to slow memory} - n2 writes Fast memory may be defined as the local processor memory (CPU cache) of size M and slow memory may be defined as the DRAM. Communication cost (reads/writes): n3 + 3n2 or O(n3) Since total running time = γ·O(n3) + β·O(n3) and β >> γ the communication cost is dominant. The blocked (tiled) matrix multiplication algorithm reduces this dominant term: ==== Blocked (tiled) matrix multiplication ==== Consider A, B and C to be n/b-by-n/b matrices of b-by-b sub-blocks where b is called the block size; assume three b-by-b blocks fit in fast memory. for i = 1 to n/b for j = 1 to n/b {read block C(i,j) into fast memory} - b2 × (n/b)2 = n2 reads for k = 1 to n/b {read block A(i,k) into fast memory} - b2 × (n/b)3 = n3/b reads {read block B(k,j) into fast memory} - b2 × (n/b)3 = n3/b reads C(i,j) = C(i,j) + A(i,k) B(k,j) - {do a matrix multiply on blocks} {write block C(i,j) back to slow memory} - b2 × (n/b)2 = n2 writes Communication cost: 2n3/b + 2n2 reads/writes << 2n3 arithmetic cost Making b as large possible: 3b2 ≤ M we achieve the following communication lower bound: 31/2n3/M1/2 + 2n2 or Ω (no. of FLOPs / M1/2) == Previous approaches for reducing communication == Most of the approaches investigated in the past to address this problem rely on scheduling or tuning techniques that aim at overlapping communication with computation. However, this approach can lead to an improvement of at most a factor of two. Ghosting is a different technique for reducing communication, in which a processor stores and computes redundantly data from neighboring processors for future computations. Cache-oblivious algorithms represent a different approach introduced in 1999 for fast Fourier transforms, and then extended to graph algorithms, dynamic programming, etc. They were also applied to several operations in linear algebra as dense LU and QR factorizations. The design of architecture specific algorithms is another approach that can be used for reducing the communication in parallel algorithms, and there are many examples in the literature of algorithms that are adapted to a given communication topology.

  Read more →
• 

  Personal, Inc.

  Personal (also referred to as Personal.com or Personal, Inc.) was a consumer personal data service and identity management system for individuals to aggregate, manage and reuse their own data. It merged with digi.me in August 2017, a business in Europe that has the same business model. The combined company is called digi.me. One of its product lines, a collaborative data management and information security solution for the workplace called TeamData, was spun off as a new company as a result of the merger. == History == Personal was founded in 2009 in Washington, DC by the management team that built The Map Network, a location data and mapping platform that was acquired by Nokia/NAVTEQ in 2006. Personal was the first online consumer-facing company to be named an Ambassador for Privacy by Design for its technical, business and legal commitments to providing users with control over the data they store in Personal's service. Called a “life management platform” by The Economist and a “personal encrypted cloud service” by TIME for its user-centric approach to data, the company has been associated with both the Infomediary model originated in 1999 by John Hagel III and Mark Singer, as well as the vendor relationship management (VRM) model developed by Doc Searls. Personal raised $30m in funding to develop its platform and products from such leading investors as Steve Case's Revolution Ventures, Grotech Ventures, Allen & Company, Ted Leonsis, Neil Ashe, Jonathan Miller, Bill Miller of Legg Mason, Esther Dyson of EDventures, and Eric C. Anderson. The company received recognition for its user agreement, called the Owner Data Agreement, which acted like a reverse license agreement when data was shared between registered parties and emphasized that data ownership resides with the user. Doc Searls wrote in The Intention Economy: When Customers Take Charge that the Owner Data Agreement “had no precedent and modeled a new legal position, both for vendors and for intermediaries.” Personal was early to embrace “small data,” which it defines as “big data for the benefit of individuals.” The term “small data” may have been originally coined by Jeremie Miller of Sing.ly, who mentioned it in a talk at the Web 2.0 Summit in November 2011 and is cited in The Intention Economy. In 2011, Personal was a part of the first group of companies to join the Personal Data Ecosystem Consortium's Startup Circle. A Small Data Meetup group has also formed in New York City, bringing together technology, legal and business experts to exchange ideas about user-centric and user-driven models for internet products and services. Personal has been included in case studies by Ctrl-Shift and Forrester regarding Personal Data Stores and Personal Identity Management. In 2011, Personal received the Innovator Spotlight Award at Privacy Identity Innovation Conference (pii2011) and participated in the Technology Showcase at pii2012. In 2012, TechHive named Personal as one of the top five apps or web services of SXSW. Personal won the 2013 Campus Technology Innovators Award with Lone Star College in July 2013. Personal was included in a list of Executive Travel Magazine's favorite travel apps for 2013 in its May/June issue. In 2013, Personal was also included as part of NYU GovLab's Open Data 500 and was named by J. Walter Thompson as one of 100 things to watch for in 2014. In 2015, the National Law Journal named Company Chief Policy Officer and General Counsel, Joshua P. Galper, as one of their 50 "Cybersecurity & Privacy Trailblazers." == Products and services == === Overview === The Personal Platform was a privacy- and security-by-design platform for individuals to manage and reuse their own data and information. The Fill It app was a 1-click form-filling solution for web and mobile logins, checkouts and forms, and the Data Vault app served as the main cloud-based repository for a user's data. Personal helped individuals take control and benefit from their information while knowing that the information in their Data Vault remained legally theirs and could not be used without their permission. === Data Vault with Cloud Sync === Personal spent two years building the Personal Platform before launching its Data Vault product in beta in November 2011. Following Privacy by Design principles, Personal only enabled users to see or share the sensitive data and all the files they stored in their Data Vault. Such information was encrypted, and could only be decrypted with a user's password. Only users could choose and know their passwords to their vault because Personal did not store user passwords – and therefore could not reset them without deleting a user's sensitive data and all files stored in their vault. All Personal apps and services were linked to a user's private Data Vault. The Data Vault featured automatic synchronization of data and files added on any device logged into Personal. It also featured a “Secure Share” function that created a live, private network, allowing registered users to share access to data and files through an exchange of encrypted keys without the risk of transmitting the data or files through non-secure, direct means. It also allowed users to immediately update data across their own network and revoke access to it when they choose. Fast Company called the Data Vault “a tool that will simplify our lives.” Personal launched its Android app on November 30, 2011. The iOS Data Vault app was released on May 7, 2012. Personal officially launched its application programming interface (APIs) on October 2, 2012 at the Mashery Business of APIs Conference. A review by CNET highlighted the challenges of getting people to trust such a new service with their sensitive data and spending the time required entering enough data to make it useful. === Fill It App and Form Index === When the Data Vault was launched in November 2011, Mashable posed the question: “Never Fill Out a Form Again?” The World Economic Forum in its February 2013 report highlighted the possibility of saving 10 billion hours globally “and improv[ing] the delivery of public and private sector services” through automated form-filling tools, specifically citing Personal's Fill It app. In January 2013, Personal launched Fill It in beta as a web bookmarklet for automatic form-filling. On June 11, 2014, Personal released Fill It as a web extension and announced that it was publishing an index of over 140,000 1-click online forms at www.fillit.com. The company also announced that a mobile version of the product will launch later in the year. According to a story in Tech Cocktail about the launch, Personal's “web extension and mobile app are able to support over 1,200 different types of reusable data, even enabling them to unlock more confidential information so they can complete longer forms, including patient registrations, job applications, event registrations, school admissions, insurance and bank applications, and government forms.” In November 2014, a mobile version of Fill It was launched that could autofill mobile forms using APIs. Personal's form portal ultimately indexed more than 500,000 forms with three components, which, together, allowed data to be captured and reused across any of the forms: (1) a form graph, which mapped individual form fields to the Personal ontology; (2) a semantic layer, which determined how data was required on a form (e.g. one field vs. three fields for a U.S. telephone number); and (3) a correlations graph, which helped individuals match their specific data to a form without looking at the data value (e.g. knowing which phone number is a mobile phone number, which address is a billing address, or that a person uses their middle name as a first name on most forms). === Monetizing personal data === With the initial public offering of Facebook in May 2012, there was media interest in the question of the monetary value of personal data and whether tools and services might emerge to help consumers monetize their own data. Personal was frequently cited as a company that could potentially offer such a service. Articles and pieces focusing on this subject have appeared in The New York Times, AdWeek, the MIT Technology Review, and on CNN and National Public Radio. Company Co-founder and CEO Shane Green was quoted as saying that “the average American consumer would soon be able to realize over $1,000 per year” by granting limited, anonymous access to their data to marketers, but that figure was never supported by Green or the company. === Launch of TeamData === In May 2016, Personal shifted its product focus to TeamData, which focuses on the problem of securing and collaboratively managing data in the workplace. It is now a separate business.

  Read more →
• 

  Artificial intelligence in industry

  Industrial artificial intelligence, or industrial AI, refers to the application of artificial intelligence to industrial business processes. Unlike general artificial intelligence which is a frontier research discipline to build computerized systems that perform tasks requiring human intelligence, industrial AI is more concerned with the application of such technologies to address industrial pain-points for customer value creation, productivity improvement, cost reduction, site optimization, predictive analysis and insight discovery. Artificial intelligence and machine learning have become key enablers to leverage data in production in recent years due to a number of different factors: More affordable sensors and the automated process of data acquisition; More powerful computation capability of computers to perform more complex tasks at a faster speed with lower cost; Faster connectivity infrastructure and more accessible cloud services for data management and computing power outsourcing. == Categories == Possible applications of industrial AI and machine learning in the production domain can be divided into seven application areas: Market and trend analysis Machinery and equipment Intralogistics Production process Supply chain Building Product Each application area can be further divided into specific application scenarios that describe concrete AI/ML scenarios in production. While some application areas have a direct connection to production processes, others cover production adjacent fields like logistics or the factory building. An example from the application scenario Process Design & Innovation are collaborative robots. Collaborative robotic arms are able to learn the motion and path demonstrated by human operators and perform the same task. Predictive and preventive maintenance through data-driven machine learning are application scenarios from the Machinery & Equipment application area. == Challenges == In contrast to entirely virtual systems, in which ML applications are already widespread today, real-world production processes are characterized by the interaction between the virtual and the physical world. Data is recorded using sensors and processed on computational entities and, if desired, actions and decisions are translated back into the physical world via actuators or by human operators. This poses major challenges for the application of ML in production engineering systems. These challenges are attributable to the encounter of process, data and model characteristics: The production domain's high reliability requirements, high risk and loss potential, the multitude of heterogeneous data sources and the non-transparency of ML model functionality impede a faster adoption of ML in real-world production processes. In particular, production data comprises a variety of different modalities, semantics and quality. Furthermore, production systems are dynamic, uncertain and complex, and engineering and manufacturing problems are data-rich but information-sparse. Besides that, due to the variety of use cases and data characteristics, problem-specific data sets are required, which are difficult to acquire, hindering both practitioners and academic researchers in this domain. === Process and industry characteristics === The domain of production engineering can be considered as a rather conservative industry when it comes to the adoption of advanced technology and their integration into existing processes. This is due to high demands on reliability of the production systems resulting from the potentially high economic harm of reduced process effectiveness due to e.g., additional unplanned downtime or insufficient product qualities. In addition, the specifics of machining equipment and products prevent area-wide adoptions across a variety of processes. Besides the technical reasons, the reluctant adoption of ML is fueled by a lack of IT and data science expertise across the domain. === Data characteristics === The data collected in production processes mainly stem from frequently sampling sensors to estimate the state of a product, a process, or the environment in the real world. Sensor readings are susceptible to noise and represent only an estimate of the reality under uncertainty. Production data typically comprises multiple distributed data sources resulting in various data modalities (e.g., images from visual quality control systems, time-series sensor readings, or cross-sectional job and product information). The inconsistencies in data acquisition lead to low signal-to-noise ratios, low data quality and great effort in data integration, cleaning and management. In addition, as a result from mechanical and chemical wear of production equipment, process data is subject to various forms of data drifts. === Machine learning model characteristics === ML models are considered as black-box systems given their complexity and intransparency of input-output relation. This reduces the comprehensibility of the system behavior and thus also the acceptance by plant operators. Due to the lack of transparency and the stochasticity of these models, no deterministic proof of functional correctness can be achieved, complicating the certification of production equipment. Given their inherent unrestricted prediction behavior, ML models are vulnerable against erroneous or manipulated data, further risking the reliability of the production system because of lacking robustness and safety. In addition to high development and deployment costs, the data drifts cause high maintenance costs, which is disadvantageous compared to purely deterministic programs. == Standard processes for data science in production == The development of ML applications – starting with the identification and selection of the use case and ending with the deployment and maintenance of the application – follows dedicated phases that can be organized in standard process models. The process models assist in structuring the development process and defining requirements that must be met in each phase to enter the next phase. The standard processes can be classified into generic and domain-specific ones. Generic standard processes (e.g., CRISP-DM, ASUM-DM, or knowledge discovery in databases (KDD)) describe a generally valid methodology and are thus independent of individual domains. Domain-specific processes on the other hand consider specific peculiarities and challenges of special application areas. The Machine Learning Pipeline in Production is a domain-specific data science methodology that is inspired by the CRISP-DM model and was specifically designed to be applied in fields of engineering and production technology. To address the core challenges of ML in engineering – process, data, and model characteristics – the methodology especially focuses on use-case assessment, achieving a common data and process understanding data integration, data preprocessing of real-world production data and the deployment and certification of real-world ML applications. == Industrial data sources == The foundation of most artificial intelligence and machine learning applications in industrial settings are comprehensive datasets from the respective fields. Those datasets act as the basis for training the employed models. In other domains, like computer vision, speech recognition or language models, extensive reference datasets (e.g. ImageNet, Librispeech, The People's Speech) and data scraped from the open internet are frequently used for this purpose. Such datasets rarely exist in the industrial context because of high confidentiality requirements and high specificity of the data. Industrial applications of artificial intelligence are therefore often faced with the problem of data availability. For these reasons, existing open datasets applicable to industrial applications, often originate from public institutions like governmental agencies or universities and data analysis competitions hosted by companies. In addition to this, data sharing platforms exist. However, most of these platforms have no industrial focus and offer limited filtering abilities regarding industrial data sources.

  Read more →
• 

  JustWatch

  JustWatch is a website that provides information on the availability of films and TV shows on various streaming platforms such as Netflix, HBO Max, Disney+, Hulu, Peacock, Fandango at Home, Apple TV, and Amazon Prime Video, among others. It is also available as a mobile application and smart TV application. JustWatch provides a search engine that allows users to discover which digital platforms host a particular movie or TV series. As of November 2023, JustWatch is available to users in 139 countries. == Features == JustWatch functions as a search engine by aggregating information about the online availability of films and TV series from video-on-demand streaming services. It aggregates information from more than 100 video content libraries, as well providing information about video resolution quality, pricing, and purchase or rental options. The website includes various filters for searching, including genre, price, release date, rating, and popularity. Users are also able to create lists of shows and movies and to share these lists with other users. == History == JustWatch GmbH is an international database company that is privately held and headquartered in Berlin, Germany. The company specializes in the online availability of movies and TV series. In addition to its user-facing website, the company also has an advertising-focused arm, JustWatch Media, that works with corporate clients, using data about what people watch that it gleans from user behavior to help entertainment companies tailor their marketing strategies. Its clients include Universal Pictures, Paramount Pictures, and Sony Pictures, among others. Development of the website began in 2014, and it was launched in the U.S. and Germany in February 2015. In 2018, the company received funding to improve databases within the European Union. In December 2019, the company acquired a rival streaming aggregation service, GoWatchIt, from Plexus Entertainment. JustWatch also used the acquisition to open its first New York office. In 2019, JustWatch had over 30 million users across 38 countries. By 2020, the company's streaming aggregation service was available in over 45 countries. By November 2023, it was available in 139 countries, and had over 40 million monthly users. === Founding === JustWatch was co-founded in 2013 by David Croyé, Cristoph Hoyer, Kevin Hiller, Dominik Raute, Ingke Weimert, and Michael Wilken. In a company blog post from February 2017, Croyé described the group of co-founders as all having previously "worked in leading roles at successful international tech-startups in Berlin." Croyé, who currently holds the title of CEO at JustWatch GmbH, had previously worked as the chief marketing officer at kaufDA, a European location-based mobile coupon and promotion service, and the background of other co-founders included time at the adtech company Trademob and the streaming site MyVideo. Startup capital for the website initially came from the founders themselves. Croyé in particular was able to reinvest funds he had obtained from the sale of kaufDA to Axel Springer, a European media company, in March 2011. Since 2015, the company has had at least one additional round of seed funding, with investors including venture capital groups CG Partners and STS Ventures.

  Read more →
• 

  SIGMOD Edgar F. Codd Innovations Award

  The ACM SIGMOD Edgar F. Codd Innovations Award is a lifetime research achievement award given by the ACM Special Interest Group on Management of Data, at its yearly flagship conference (also called SIGMOD). According to its homepage, it is given "for innovative and highly significant contributions of enduring value to the development, understanding, or use of database systems and databases". The award has been given since 1992. Until 2003, this award was known as the “SIGMOD Innovations Award.” In 2004, SIGMOD, with the unanimous approval of ACM Council, decided to rename the award to honor Dr. E.F. (Ted) Codd (1923 – 2003) who invented the relational data model and was responsible for the significant development of the database field as a scientific discipline. == Recipients ==

  Read more →
• 

  Mathematical knowledge management

  Mathematical knowledge management (MKM) is the study of how society can effectively make use of the vast and growing literature on mathematics. It studies approaches such as databases of mathematical knowledge, automated processing of formulae and the use of semantic information, and artificial intelligence. Mathematics is particularly suited to a systematic study of automated knowledge processing due to the high degree of interconnectedness between different areas of mathematics.

  Read more →
• 

  Principles for a Data Economy

  The Principles for a Data Economy – Data Rights and Transactions is a transatlantic legal project carried out jointly by the American Law Institute (ALI) and the European Law Institute (ELI). The Principles for a Data Economy deals with a range of different legal questions that arise in the data economy. Since data is different from other tradeable items, the Principles draw up legal rules for data transactions and data rights that take into account the interests of different stakeholders involved in the data economy. The Principles are designed to facilitate contractual relations as well as the drafting of model agreements and can guide courts and legislators worldwide. The project proposes a set of principles that can be implemented in any legal system and is designed to work in conjunction with any kind of data privacy/data protection law, intellectual property law or trade secret law. The Principles do not address or seek to change any of the substantive rules of these bodies of law. The Project Team consists of Neil B Cohen and Christiane Wendehorst (as Project Reporters) and Lord John Thomas as well as Steven O. Weise (as Project Chairs). == Characteristics of data == The law governing trades in commerce has historically focused on trade in items that are tangible like goods or on intangible assets, such as shares or licenses. However, data does not fit into any of these traditional categories, nor does it qualify as a service. It is often unclear how traditional legal rules and doctrines can apply to data, as data is different from other assets in many ways. For example, data can be multiplied at basically no cost and can be used in parallel for a variety of different purposes by many different people at the same time (data is a “non-rivalrous” resource). Uncertainty regarding the applicable rules to govern the data economy may inhibit innovation and growth and trouble stakeholders like data-driven industries, start-ups, and consumers. == Stakeholders in the data economy == The Principles have taken the basic types of players and relations which can be found in data ecosystems as a starting point to provide guidance in different situations. The central actors in the data economy are data controllers (also called “data holders”). They are in a position to access the data and decide for which purposes and means this data should be processed. A controller may exercise control all by itself or share it with co-controllers, such as under a data pooling arrangement. Data processors provide the processing of data on a controller’s behalf as a service. Another important group of stakeholders includes those that contribute to the generation of data (e.g. data subjects). Other players in the data economy include data assemblers or data intermediaries (e.g. data trusts). == History of the project and timeline == Before the official adoption of the project by ALI and ELI bodies in 2018, the project team carried out a Feasibility Study from October 2016 to February 2018. In the following years, the project team produced a number of drafts (e.g. “Preliminary Drafts” No. 1 to 4, “Tentative Draft No. 1”) and project progress were regularly discussed with advisory bodies and members of both the ALI and the ELI. The project reporters also included feedback and insights from industry stakeholders and experts that was gained after several meetings and workshops, hosted, inter alia by UNCITRAL, UNIDROIT and several national governmental institutions. Tentative Draft No. 2 was presented at the ALI Annual Meeting in May 2021 and approved by ALI membership. The latest draft ("Final Council Draft") was also approved by the ELI Council and ELI Membership. The Principles for a Data Economy were presented at an international conference with representatives from institutions such as the Uniform Law Commission (ULC), the European Commission, UNIDROIT, the OECD, the International Chamber of Commerce (ICC) and the World Economic Forum (WEF) in October 2021. == Project structure == The current draft (“Tentative Draft No. 2”) of the Principles consists of five Parts that each governs different aspects of the data economy: General Provisions, Data Contracts, Data Rights, Third Party Aspects of Data Activities, and Multi-State Issues. === General Provisions === Part I includes general provisions that apply to all other Parts of the Principles for a Data Economy. This Part sets out the purpose of the Principles: they aim to make existing law in the field of the data economy more coherent and support the development of the law in this field by courts and legislators worldwide. It is also clarified that the Principles have a wide scope of application and can be used in a variety of ways by stakeholders in the data economy. The Principles may, for example, serve private parties as a basis for contract formation, guide the deliberations of arbitral tribunals or inspire national legislation. Part I then defines several key terms, such as ‘digital data’ and ‘data right’. The scope of the Principles is limited to matters where information is recorded as an asset, resource or tradeable commodity and where large amounts of data, rather than single pieces of information, are concerned. This Part also clarifies that remedies with respect to data contracts and data rights are left to the applicable national law. === Data Contracts === Part II lists different types of contracts that often occur in the data economy and establishes two broad categories, namely contracts for the supply and sharing of data and contracts for services with regard to data. Contracts for the supply and sharing of data include, e.g. data transfer contracts or data pooling arrangements, while contracts for services with regard to data cover contracts for the processing of data or data intermediary contracts. The Principles provide default terms for each contract type, on issues such as the manner in which data should supply or which characteristics the data supplied should meet. These default terms 'automatically' become part of the contract unless the parties agree otherwise. === Data Rights === Part III governs legally protected interests of players in the data economy that stem from the characteristics of data as a resource (e.g. its non-rivalrous nature) or from public interest considerations. Such data rights may include the right to data access, the right to require the controller to desist from data activities or to correct incorrect/incomplete data, or even to receive an economic share in profits derived from the use of data. For example, the Principles deal with data rights of stakeholders that had a share in the co-generation of data and identify different factors to be considered in determining whether to afford a party a data right. The underlying idea that parties who have contributed to the generation of data should have some rights in the utilization of the data is also recognized by governmental institutions, such as by the Japanese Ministry of Economy, Trade and Industry (METI), and the term co-generated data, which was coined by the Principles for a Data Economy, has been adopted, inter alia by the European Commission, the German Data Ethics Commission and the Global Partnership on Artificial Intelligence (GPAI). This Part also deals with data rights for the public interest, such as data sharing rights in the field of innovation. === Third Party Aspects === Part IV governs different situations in which data transactions interfere with the rights of third parties. Such rights include intellectual property rights or rights derived from data privacy or data protection law. This Part sets out under which circumstances data activities should be considered wrongful vis à vis another party. For example, a data activity (like data processing or the onward supply of data) could be considered wrongful, if a controller interferes with the rights of data subjects that are protected by data-protection law. A data activity could also be wrongful if the controller is non-compliant with contractual limitations on data activities, enforceable by the protected party (e.g. a controller may only process data for a certain purpose). If someone obtained access to data by unauthorized means (i.e. data “theft”) this could also be considered wrongful. The Part on Third-Party Aspects also takes a detailed look at the effects of the onward supply of data can have on third parties, while balancing the protection of third parties on the one hand, with the interests of data recipients and the desire to encourage data sharing on the other. === Multi-State Issues === As transactions in the data economy are international by nature and hardly occur within one legal system alone, the Part V of the Principles also briefly touches upon the applicability of the rules and doctrines of private international law to such transactions. == Links == Website of the “Principles for a Data Economy – Data Rights and Transaction

  Read more →
• 

  Automated storage and retrieval system

  An automated storage and retrieval system (ASRS or AS/RS) consists of a variety of computer-controlled systems for automatically placing and retrieving loads from defined storage locations. Automated storage and retrieval systems (AS/RS) are typically used in applications where: There is a very high volume of loads being moved into and out of storage Storage density is important because of space constraints No value is added in this process (no processing, only storage and transport) Accuracy is critical because of potential expensive damages to the load An AS/RS can be used with standard loads as well as nonstandard loads, meaning that each standard load can fit in a uniformly-sized volume; for example, the film canisters in the image of the Defense Visual Information Center are each stored as part of the contents of the uniformly sized metal boxes, which are shown in the image. Standard loads simplify the handling of a request of an item. In addition, audits of the accuracy of the inventory of contents can be restricted to the contents of an individual metal box, rather than undergoing a top-to-bottom search of the entire facility, for a single item. They can also be used in self storage places. == Overview == AS/RS systems are designed for automated storage and retrieval of parts and items in manufacturing, distribution, retail, wholesale and institutions. They first originated in the 1960s, initially focusing on heavy pallet loads but with the evolution of the technology the handled loads have become smaller. The systems operate under computerized control, maintaining an inventory of stored items. Retrieval of items is accomplished by specifying the item type and quantity to be retrieved. The computer determines where in the storage area the item can be retrieved from and schedules the retrieval. It directs the proper automated storage and retrieval machine (SRM) to the location where the item is stored and directs the machine to deposit the item at a location where it is to be picked up. A system of conveyors and or automated guided vehicles is sometimes part of the AS/RS system. These take loads into and out of the storage area and move them to the manufacturing floor or loading docks. To store items, the pallet or tray is placed at an input station for the system, the information for inventory is entered into a computer terminal and the AS/RS system moves the load to the storage area, determines a suitable location for the item, and stores the load. As items are stored into or retrieved from the racks, the computer updates its inventory accordingly. The benefits of an AS/RS system include reduced labor for transporting items into and out of inventory, reduced inventory levels, more accurate tracking of inventory, and space savings. Items are often stored more densely than in systems where items are stored and retrieved manually. Within the storage, items can be placed on trays or hang from bars, which are attached to chains/drives in order to move up and down. The equipment required for an AS/RS include a storage & retrieval machine (SRM) that is used for rapid storage and retrieval of material. SRMs are used to move loads vertically or horizontally, and can also move laterally to place objects in the correct storage location. The trend towards Just In Time production often requires sub-pallet level availability of production inputs, and AS/RS is a much faster way of organizing the storage of smaller items next to production lines. The Material Handling Institute of America (MHIA), the non-profit trade association for the material handling world, and its members have categorised AS/RS into two primary segments: Fixed Aisle and Carousels/Vertical Lift Modules (VLMs). Both sets of technologies provide automated storage and retrieval for parts and items, but use different technologies. Each technology has its unique set of benefits and disadvantages. Fixed Aisle systems are characteristically larger systems whereas carousels and Vertical Lift Modules are used individually or grouped, but in small to medium-sized applications. A fixed-aisle AS/R machine (stacker crane) is one of two main designs: single-masted or double masted. Most are supported on a track and ceiling guided at the top by guide rails or channels to ensure accurate vertical alignment, although some are suspended from the ceiling. The 'shuttles' that make up the system travel between fixed storage shelves to deposit or retrieve a requested load (ranging from a single book in a library system to a several ton pallet of goods in a warehouse system). The entire unit moves horizontally within an aisle, while the shuttles are able to elevate up to the necessary height to reach the load, and can extend and retract to store or retrieve loads that are several positions deep in the shelving. A semi-automated system can be achieved by utilizing only specialized shuttles within an existing rack system. Another AS/RS technology is known as shuttle technology. In this technology the horizontal movement is made by independent shuttles each operating on one level of the rack while a lift at a fixed position within the rack is responsible for the vertical movement. By using two separate machines for these two axes the shuttle technology is able to provide higher throughput rates than stacker cranes. Storage and Retrieval Machines pick up or drop off loads to the rest of the supporting transportation system at specific stations, where inbound and outbound loads are precisely positioned for proper handling. In addition, there are several types of Automated Storage & Retrieval Systems (AS/RS) devices called Unit-load AS/RS, Mini-load AS/RS, Mid-Load AS/RS, Vertical Lift Modules (VLMs), Horizontal Carousels and Vertical Carousels. These systems are used either as stand-alone units or in integrated workstations called pods or systems. These units are usually integrated with various types of pick to light systems and use either a microprocessor controller for basic usage or inventory management software. These systems are ideal for increasing space utilization up to 90%, productivity levels by 90%, accuracy to 99.9%+ levels and throughput up to 750 lines per hour/per operator or more depending on the configuration of the system. == Horizontal carousels == Robotic Inserter/Extractor devices can be used for horizontal carousels. The robotic device is positioned in the front or rear of up to three horizontal carousels tiered high. The robot grabs the tote required in the order and often replenishes at the same time to speed up throughput. The tote(s) are then delivered to a conveyor, which routes it to a work station for picking or replenishing. Up to eight transactions per minute per unit can be done. Totes or containers up to 36" x 36" x 36" can be used in a system. On a simplistic level, horizontal carousels are also often used as "rotating shelving". With simple "fetch" command, items are brought to the operator and otherwise wasted space is eliminated. AS/RS Applications: Most applications of AS/RS technology have been associated with warehousing and distribution operations. An AS/RS can also be used to store raw materials and work in process in manufacturing. Three application areas can be distinguished for AS/RS: (1) Unit load storage and handling, (2) Order picking, and (3) Work in process storage. Unit load storage and retrieval applications are represented by unit load AS/RS and deep-lane storage systems. These kinds of applications are commonly found in warehousing for finishing goods in a distribution center, rarely in manufacturing. Deep-lane systems are used in the food industry. As described above, order picking involves retrieving materials in less than full unit load quantities. Minilpass, man-on board, and items retrieval systems are used for this second application area. Work in process storage is a more recent application of automated storage technology. While it is desirable to minimize the amount of work in process, WIP is unavoidable and must be effectively managed. Automated storage systems, either automated storage/retrieval systems or carousel systems, represent an efficient way to store materials between processing steps, particularly in batch and job shop production. In high production, work in process is often carried between operations by conveyor system, which this serve both storage and transport functions. === Inventory Category-specific AS/RS === Each inventory category—raw materials, work-in-process, and finished goods—requires its own specialized Automated Storage and Retrieval System (AS/RS). Particularly for work-in-process (WIP) inventories, due to variations in manufacturing processes, the AS/RS systems are significantly different in design and function, tailored specifically to match unique handling, storage, and retrieval requirements === Installed applications === Installed applications of this technology can be wide-ranging. In some librarie

  Read more →
• 

  Social information architecture

  Social information architecture, also known as social iA, is a sub-domain of information architecture which deals with the social aspects of conceptualizing, modeling and organizing information. It has become more relevant because of the rise of social media and Web 2.0 in recent times. == Approach == There are different approaches to the explanation of social information architecture. === Architecture model (internal space) === Architects designing a physical community space, have to consider how the architecture will shape social interactions. A long hallway of offices creates an utterly different dynamic than desks with arranged in an open space. One might foster individuality, privacy, propriety; the other: collaboration, distraction, communalism. Still, physical spaces can be flexibly repurposed and worked around if the inhabitants desire a social dynamic not instantly afforded by the space. Office doors can be left open to invite easier interaction. Partitions can be raised between adjacent desks to limit distraction and increase privacy. That's physical architecture. The information architectures of online communities are far more deterministic and far less flexible. They literally define the social architecture by pre-specifying in immutable computer code what information you have access to, who you can talk to, where you can go. In the online world, information architecture = social architecture. === Social dialogue and information model (external space) === All major brands use information architecture to market their products online, it is then commonly wrapped under the umbrella phrase 'digital strategy'. Information architecture used for strategic purposes encompasses brand SEO, strategic placement of virals, social media presence etc. Charities, news outlets and social dialogue forums can make a much more specific use of the same tools for positive and important social purposes. Social Information Architecture is perceived as the socially conscious wing of commercial information architecture and function to exchange information and ideas between people and groups. Social iA can pick up on conflicting issues that are treated with misunderstanding between cultures and leaves individuals and societies vulnerable to exploitation and manipulation. Since the net has such a far reach it is obvious to use it for meaningful and coordinated social dialogue. Example of such issues are faith, environment, politics, climate change, war, injustice and other social challenges. Information architecture can help create frameworks in which sharing information brings people together, inspires and encourages them to participate in a forward thinking and unfragmented way. One of its core activities is to spread messages that bring people from opposite sites of social and cultural spectrums together and to confront uncomfortable subject head on. == How does social information architecture work? == Social iA utilizes a variety of Web2.0 applications to filter relevant or valuable information and weave them in appropriate information repository or provide feedback to interesting channels. Social iA makes strategic use of Search Engines, Social Media, Google Algorithms, as well as websites, video & news channels. It ‘reads’ or 'listens' to social conversations and search engine queries and engages with the net actively to gather clues about the world's pulse on the internet. It assesses data, social & political trends, and respond with targeted campaigns to give people ideas, as well as help people with making sense of information. == Principals == Dan Brown in his paper 8 Principals of Social Information Architecture enlists the following principals: 1. The principle of objects: Treat content as a living, breathing thing, with a lifecycle, behaviors and attributes. 2. The principle of choices: Create pages that offer meaningful choices to users, keeping the range of choices available focused on a particular task. 3. The principle of disclosure: Show only enough information to help people understand what kinds of information they'll find as they dig deeper. 4. The principle of exemplars: Describe the contents of categories by showing examples of the contents. 5. The principle of front doors: Assume at least half of the website's visitors will come through some page other than the home page. 6. The principle of multiple classification: Offer users several different classification schemes to browse the site's content. 7. The principle of focused navigation: Don't mix apples and oranges in your navigation scheme. 8. The principle of growth: Assume the content you have today is a small fraction of the content you will have tomorrow. == What can social information architecture achieve? == Social information architecture has many potentials in terms of fostering social connections and how information is shared in social spaces on the web.

  Read more →
• 

  Algorithms and Combinatorics

  Algorithms and Combinatorics (ISSN 0937-5511) is a book series in mathematics, and particularly in combinatorics and the design and analysis of algorithms. It is published by Springer Science+Business Media, and was founded in 1987. == Books == The books published in this series include: The Simplex Method: A Probabilistic Analysis (Karl Heinz Borgwardt, 1987, vol. 1) Geometric Algorithms and Combinatorial Optimization (Martin Grötschel, László Lovász, and Alexander Schrijver, 1988, vol. 2; 2nd ed., 1993) Systems Analysis by Graphs and Matroids (Kazuo Murota, 1987, vol. 3) Greedoids (Bernhard Korte, László Lovász, and Rainer Schrader, 1991, vol. 4) Mathematics of Ramsey Theory (Jaroslav Nešetřil and Vojtěch Rödl, eds., 1990, vol. 5) Matroid Theory and its Applications in Electric Network Theory and in Statics (Andras Recszki, 1989, vol. 6) Irregularities of Partitions: Papers from the meeting held in Fertőd, July 7–11, 1986 (Gábor Halász and Vera T. Sós, eds., 1989, vol. 8) Paths, Flows, and VLSI-Layout: Papers from the meeting held at the University of Bonn, Bonn, June 20–July 1, 1988 (Bernhard Korte, László Lovász, Hans Jürgen Prömel, and Alexander Schrijver, eds., 1990, vol. 9) New Trends in Discrete and Computational Geometry (János Pach, ed., 1993, vol. 10) Discrete Images, Objects, and Functions in Z n {\displaystyle \mathbb {Z} ^{n}} (Klaus Voss, 1993, vol. 11) Linear Optimization and Extensions (Manfred Padberg, 1999, vol. 12) The Mathematics of Paul Erdős I (Ronald Graham and Jaroslav Nešetřil, eds., 1997, vol. 13) The Mathematics of Paul Erdős II (Ronald Graham and Jaroslav Nešetřil, eds., 1997, vol. 14) Geometry of Cuts and Metrics (Michel Deza and Monique Laurent, 1997, vol. 15) Probabilistic Methods for Algorithmic Discrete Mathematics (M. Habib, C. McDiarmid, J. Ramirez-Alfonsin, and B. Reed, 1998, vol. 16) Modern Cryptography, Probabilistic Proofs and Pseudorandomness (Oded Goldreich, 1999, vol. 17) Geometric Discrepancy: An Illustrated Guide (Jiří Matoušek, 1999, vol. 18) Applied Finite Group Actions (Adalbert Kerber, 1999, vol. 19) Matrices and Matroids for Systems Analysis (Kazuo Murota, 2000, vol. 20; corrected ed., 2010) Combinatorial Optimization (Bernhard Korte and Jens Vygen, 2000, vol. 21; 5th ed., 2012) The Strange Logic of Random Graphs (Joel Spencer, 2001, vol. 22) Graph Colouring and the Probabilistic Method (Michael Molloy and Bruce Reed, 2002, Vol. 23) Combinatorial Optimization: Polyhedra and Efficiency (Alexander Schrijver, 2003, vol. 24. In three volumes: A. Paths, flows, matchings; B. Matroids, trees, stable sets; C. Disjoint paths, hypergraphs) Discrete and Computational Geometry: The Goodman-Pollack Festschrift (B. Aronov, S. Basu, J. Pach, and M. Sharir, eds., 2003, vol. 25) Topics in Discrete Mathematics: Dedicated to Jarik Nešetril on the Occasion of his 60th birthday (M. Klazar, J. Kratochvíl, M. Loebl, J. Matoušek, R. Thomas, and P. Valtr, eds., 2006, vol. 26) Boolean Function Complexity: Advances and Frontiers (Stasys Jukna, 2012, Vol. 27) Sparsity: Graphs, Structures, and Algorithms (Jaroslav Nešetřil and Patrice Ossona de Mendez, 2012, vol. 28) Optimal Interconnection Trees in the Plane (Marcus Brazil and Martin Zachariasen, 2015, vol. 29) Combinatorics and Complexity of Partition Functions (Alexander Barvinok, 2016, vol. 30)

  Read more →