AI Video Tools

Explore the best AI Video Tools — independent reviews, comparisons, pricing and step-by-step how-to guides, curated by Aizhi.

• 

  Scan line

  A scan line (also scanline) is one line, or row, in a raster scanning pattern, such as a line of video on a cathode-ray tube (CRT) display of a television set or computer monitor. On CRT screens the horizontal scan lines are visually discernible, even when viewed from a distance, as alternating colored lines and black lines, especially when a progressive scan signal with below maximum vertical resolution is displayed. This is sometimes used today as a visual effect in computer graphics. The term is used, by analogy, for a single row of pixels in a raster graphics image. Scan lines are important in representations of image data, because many image file formats have special rules for data at the end of a scan line. For example, there may be a rule that each scan line starts on a particular boundary (such as a byte or word; see for example BMP file format). This means that even otherwise compatible raster data may need to be analyzed at the level of scan lines in order to convert between formats.

  Read more →
• 

  Kinematic chain

  In mechanical engineering, a kinematic chain is an assembly of rigid bodies connected by joints to provide constrained motion that is the mathematical model for a mechanical system. As the word chain suggests, the rigid bodies, or links, are constrained by their connections to other links. An example is the simple open chain formed by links connected in series, like the usual chain, which is the kinematic model for a typical robot manipulator. Mathematical models of the connections, or joints, between two links are termed kinematic pairs. Kinematic pairs model the hinged and sliding joints fundamental to robotics, often called lower pairs and the surface contact joints critical to cams and gearing, called higher pairs. These joints are generally modeled as holonomic constraints. A kinematic diagram is a schematic of the mechanical system that shows the kinematic chain. The modern use of kinematic chains includes analysis of Linkages (mechanical), compliance that arises from flexure joints in precision mechanisms, link compliance in compliant mechanisms and micro-electro-mechanical systems, and cable compliance in cable robotic and tensegrity systems. == Mobility formula == The degrees of freedom, or mobility, of a kinematic chain is the number of parameters that define the configuration of the chain. A system of n rigid bodies moving in space has 6n degrees of freedom measured relative to a fixed frame. This frame is included in the count of bodies, so that mobility does not depend on link that forms the fixed frame. This means the degree-of-freedom of this system is M = 6(N − 1), where N = n + 1 is the number of moving bodies plus the fixed body. Joints that connect bodies impose constraints. Specifically, hinges and sliders each impose five constraints and therefore remove five degrees of freedom. It is convenient to define the number of constraints c that a joint imposes in terms of the joint's freedom f, where c = 6 − f. In the case of a hinge or slider, which are one-degree-of-freedom joints, have f = 1 and therefore c = 6 − 1 = 5. The result in general where d {\displaystyle d} is the degrees of freedom for the mobility of a kinematic chain formed from n moving links and j joints each with freedom fi, i = 1, 2, …, j, is given by M = d n − ∑ i = 1 j ( d − f i ) = d ( N − 1 − j ) + ∑ i = 1 j f i {\displaystyle M=dn-\sum _{i=1}^{j}(d-f_{i})=d(N-1-j)+\sum _{i=1}^{j}f_{i}} Where N is the total number of links and includes the fixed link. Spacial linkages used d = 6 {\displaystyle d=6} and planar linkages use d = 3 {\displaystyle d=3} . This result is known as the Chebychev–Grübler–Kutzbach criterion. == Analysis of kinematic chains == The constraint equations of a kinematic chain couple the range of movement allowed at each joint to the dimensions of the links in the chain, and form algebraic equations that are solved to determine the configuration of the chain associated with specific values of input parameters, called degrees of freedom. The constraint equations for a kinematic chain are obtained using rigid transformations [Z] to characterize the relative movement allowed at each joint and separate rigid transformations [X] to define the dimensions of each link. In the case of a serial open chain, the result is a sequence of rigid transformations alternating joint and link transformations from the base of the chain to its end link, which is equated to the specified position for the end link. A chain of n links connected in series has the kinematic equations, [ T ] = [ Z 1 ] [ X 1 ] [ Z 2 ] [ X 2 ] ⋯ [ X n − 1 ] [ Z n ] , {\displaystyle [T]=[Z_{1}][X_{1}][Z_{2}][X_{2}]\cdots [X_{n-1}][Z_{n}],\!} where [T] is the transformation locating the end-link—notice that the chain includes a "zeroth" link consisting of the ground frame to which it is attached. These equations are called the forward kinematics equations of the serial chain. Kinematic chains of a wide range of complexity are analyzed by equating the kinematics equations of serial chains that form loops within the kinematic chain. These equations are often called loop equations. The complexity (in terms of calculating the forward and inverse kinematics) of the chain is determined by the following factors: Its topology: a serial chain, a parallel manipulator, a tree structure, or a graph. Its geometrical form: how are neighbouring joints spatially connected to each other? Explanation Two or more rigid bodies in space are collectively called a rigid body system. We can hinder the motion of these independent rigid bodies with kinematic constraints. Kinematic constraints are constraints between rigid bodies that result in the decrease of the degrees of freedom of rigid body system. == Synthesis of kinematic chains == The constraint equations of a kinematic chain can be used in reverse to determine the dimensions of the links from a specification of the desired movement of the system. This is termed kinematic synthesis. Perhaps the most developed formulation of kinematic synthesis is for four-bar linkages, which is known as Burmester theory. Ferdinand Freudenstein is often called the father of modern kinematics for his contributions to the kinematic synthesis of linkages beginning in the 1950s. His use of the newly developed computer to solve Freudenstein's equation became the prototype of computer-aided design systems. This work has been generalized to the synthesis of spherical and spatial mechanisms.

  Read more →
• 

  International Medical Education Directory

  The International Medical Education Directory (IMED) was a public database of worldwide medical schools. The IMED was published as a joint collaboration of the Educational Commission for Foreign Medical Graduates (ECFMG) and the Foundation for Advancement of International Medical Education and Research (FAIMER). The information available in IMED was derived from data collected by the Educational Commission for Foreign Medical Graduates (ECFMG) throughout its history of evaluating the medical education credentials of international medical graduates. Using these data as a starting point, Foundation for Advancement of International Medical Education and Research (FAIMER) began developing IMED in 2001 and made it publicly available in April 2002. In April 2014, IMED was merged with the Avicenna Directory to create the World Directory of Medical Schools. The World Directory is now the definitive list of medical schools in the world, as IMED and Avicenna were discontinued in 2015.

  Read more →
• 

  Jordan Antiquities Database and Information System

  The Jordan Antiquities Database and Information System (JADIS) was a computer database of antiquities in Jordan, the first of its kind in the Arab world. It was established by the Department of Antiquities in 1990, in cooperation with the American Center for Oriental Research in Amman and sponsored by the United States Agency for International Development. JADIS was in use until 2002, when it was superseded by a new system, MEGA-J. Over 10,841 antiquities were registered in the database. An introduction and printed summary of the database was published by the Department of Antiquities in 1994, edited by Gaetano Palumbo.

  Read more →
• 

  ArcObjects

  ArcObjects is a development environment of the ArcGIS family of applications. Using Visual Basic for Applications, C# or Java SDK for ArcGIS, it allows developers to extend these applications.ArcObjects is a library of Component Object Model (COM) components that build up the foundation of Esri's ArcGIS platform. ArcObjects is written primarily in the C++ programming language. Since ArcGIS is completely built on top of ArcObjects, the ArcGIS platform can be fully customized and extended by making use of its COM services and capabilities. This allows for easy extension of the ArcObjects data model with any programming language that is compatible with COM, such as Visual Basic, C#, Visual Basic.NET, Java and Python. COM enables components to be reused at a binary level, meaning developers do not require access to the source code of ArcObjects in order to extend the ArcGIS platform. For this reason, an ArcObjects programmer can make use of any type inside the ArcObjects system without knowing the implementation details of the type, only needing to know what the type is able to do. The ArcObjects data model is based on the COM standard, which makes it compatible with other COM objects and applications. This allows for easy integration and collaboration with other systems that are also based on the COM standard. The ArcGIS platform was built using ArcObjects types, such as classes, interfaces, and enumerations. ArcObjects use COM interfaces to organize and communicate properties and methods of its classes, ensuring compatibility with other COM-based objects and systems. When working with an ArcObjects COM class, its properties and methods are accessed solely through one of its implemented interfaces via the process of Query Interface (QI). Multiple interfaces are commonly available for classes in ArcObjects. For example, it is possible to query for additional interfaces implemented by an object after instantiation via the process of QI. Although only one interface can be used when instantiating an object, multiple interfaces are often available for classes in ArcObjects, allowing for greater flexibility and compatibility with other systems based on the COM standard.

  Read more →
• 

  Fantavision

  Fantavision is an animation program by Scott Anderson for the Apple II and published by Broderbund in 1985. Versions were released for the Apple IIGS (1987), Amiga (1988), and MS-DOS (1988). Fantavision allows the creation of vector graphics animations using the mouse and keyboard. The user creates frames, and the software generates the frames between them. Because this is done in real-time, it allows for creative exploration and quick changes. The program uses a graphical user interface in the style of the Macintosh with pull-down menus and black text on a white background. Advertisements claimed Fantavision a revolutionary breakthrough that brings the animation features of "tweening" and "transforming" to home computers. == Reception == Compute! in 1989 called Fantavision the best animation program for the IBM PC, although it noted the inability to draw curves. == Reviews == Games #70

  Read more →
• 

  Global serializability

  In concurrency control of databases, transaction processing (transaction management), and other transactional distributed applications, global serializability (or modular serializability) is a property of a global schedule of transactions. A global schedule is the unified schedule of all the individual database (and other transactional object) schedules in a multidatabase environment (e.g., federated database). Complying with global serializability means that the global schedule is serializable, has the serializability property, while each component database (module) has a serializable schedule as well. In other words, a collection of serializable components provides overall system serializability, which is usually incorrect. A need in correctness across databases in multidatabase systems makes global serializability a major goal for global concurrency control (or modular concurrency control). With the proliferation of the Internet, Cloud computing, Grid computing, and small, portable, powerful computing devices (e.g., smartphones), as well as increase in systems management sophistication, the need for atomic distributed transactions and thus effective global serializability techniques, to ensure correctness in and among distributed transactional applications, seems to increase. In a federated database system or any other more loosely defined multidatabase system, which are typically distributed in a communication network, transactions span multiple (and possibly distributed) databases. Enforcing global serializability in such system, where different databases may use different types of concurrency control, is problematic. Even if every local schedule of a single database is serializable, the global schedule of a whole system is not necessarily serializable. The massive communication exchanges of conflict information needed between databases to reach conflict serializability globally would lead to unacceptable performance, primarily due to computer and communication latency. Achieving global serializability effectively over different types of concurrency control has been open for several years. == The global serializability problem == === Problem statement === The difficulties described above translate into the following problem: Find an efficient (high-performance and fault tolerant) method to enforce Global serializability (global conflict serializability) in a heterogeneous distributed environment of multiple autonomous database systems. The database systems may employ different concurrency control methods. No limitation should be imposed on the operations of either local transactions (confined to a single database system) or global transactions (span two or more database systems). === Quotations === Lack of an appropriate solution for the global serializability problem has driven researchers to look for alternatives to serializability as a correctness criterion in a multidatabase environment (e.g., see Relaxing global serializability below), and the problem has been characterized as difficult and open. The following two quotations demonstrate the mindset about it by the end of the year 1991, with similar quotations in numerous other articles: "Without knowledge about local as well as global transactions, it is highly unlikely that efficient global concurrency control can be provided... Additional complications occur when different component DBMSs [Database Management Systems] and the FDBMSs [Federated Database Management Systems] support different concurrency mechanisms... It is unlikely that a theoretically elegant solution that provides conflict serializability without sacrificing performance (i.e., concurrency and/or response time) and availability exists." === Proposed solutions === Several solutions, some partial, have been proposed for the global serializability problem. Among them: Global conflict graph (serializability graph, precedence graph) checking Distributed Two-phase locking (Distributed 2PL) Distributed Timestamp ordering Tickets (local logical timestamps which define local total orders, and are propagated to determine global partial order of transactions) == Relaxing global serializability == Some techniques have been developed for relaxed global serializability (i.e., they do not guarantee global serializability; see also Relaxing serializability). Among them (with several publications each): Quasi serializability Two-level serializability Another common reason nowadays for Global serializability relaxation is the requirement of availability of internet products and services. This requirement is typically answered by large scale data replication. The straightforward solution for synchronizing replicas' updates of a same database object is including all these updates in a single atomic distributed transaction. However, with many replicas such a transaction is very large, and may span several computers and networks that some of them are likely to be unavailable. Thus such a transaction is likely to end with abort and miss its purpose. Consequently, Optimistic replication (Lazy replication) is often utilized (e.g., in many products and services by Google, Amazon, Yahoo, and alike), while global serializability is relaxed and compromised for eventual consistency. In this case relaxation is done only for applications that are not expected to be harmed by it. Classes of schedules defined by relaxed global serializability properties either contain the global serializability class, or are incomparable with it. What differentiates techniques for relaxed global conflict serializability (RGCSR) properties from those of relaxed conflict serializability (RCSR) properties that are not RGCSR is typically the different way global cycles (span two or more databases) in the global conflict graph are handled. No distinction between global and local cycles exists for RCSR properties that are not RGCSR. RCSR contains RGCSR. Typically RGCSR techniques eliminate local cycles, i.e., provide local serializability (which can be achieved effectively by regular, known concurrency control methods); however, obviously they do not eliminate all global cycles (which would achieve global serializability).

  Read more →
• 

  Texture filtering

  In computer graphics, texture filtering or texture smoothing is the method used to determine the texture color for a texture mapped pixel, using the colors of nearby texels (ie. pixels of the texture). Filtering describes how a texture is applied at many different shapes, size, angles and scales. Depending on the chosen filter algorithm, the result will show varying degrees of blurriness, detail, spatial aliasing, temporal aliasing and blocking. Depending on the circumstances, filtering can be performed in software (such as a software rendering package) or in hardware, eg. with either real time or GPU accelerated rendering circuits, or in a mixture of both. For most common interactive graphical applications, modern texture filtering is performed by dedicated hardware which optimizes memory access through memory cacheing and pre-fetch, and implements a selection of algorithms available to the user and developer. There are two main categories of texture filtering: magnification filtering and minification filtering. Depending on the situation, texture filtering is either a type of reconstruction filter where sparse data is interpolated to fill gaps (magnification), or a type of anti-aliasing (AA) where texture samples exist at a higher frequency than required for the sample frequency needed for texture fill (minification). There are many methods of texture filtering, which make different trade-offs between computational complexity, memory bandwidth and image quality. == The need for filtering == During the texture mapping process for any arbitrary 3D surface, a texture lookup takes place to find out where on the texture each pixel center falls. For texture-mapped polygonal surfaces composed of triangles typical of most surfaces in 3D games and movies, every pixel (or subordinate pixel sample) of that surface will be associated with some triangle(s) and a set of barycentric coordinates, which are used to provide a position within a texture. Such a position may not lie perfectly on the "pixel grid," necessitating some function to account for these cases. In other words, since the textured surface may be at an arbitrary distance and orientation relative to the viewer, one pixel does not usually correspond directly to one texel. Some form of filtering has to be applied to determine the best color for the pixel. Insufficient or incorrect filtering will show up in the image as artifacts (errors in the image), such as 'blockiness', jaggies, or shimmering. There can be different types of correspondence between a pixel and the texel/texels it represents on the screen. These depend on the position of the textured surface relative to the viewer, and different forms of filtering are needed in each case. Given a square texture mapped on to a square surface in the world, at some viewing distance the size of one screen pixel is exactly the same as one texel. Closer than that, the texels are larger than screen pixels, and need to be scaled up appropriately — a process known as texture magnification. Farther away, each texel is smaller than a pixel, and so one pixel covers multiple texels. In this case an appropriate color has to be picked based on the covered texels, via texture minification. Graphics APIs such as OpenGL allow the programmer to set different choices for minification and magnification filters. Note that even in the case where the pixels and texels are exactly the same size, one pixel will not necessarily match up exactly to one texel. It may be misaligned or rotated, and cover parts of up to four neighboring texels. Hence some form of filtering is still required. == Mipmapping == Mipmapping is a standard technique used to save some of the filtering work needed during texture minification. It is also highly beneficial for cache coherency - without it the memory access pattern during sampling from distant textures will exhibit extremely poor locality, adversely affecting performance even if no filtering is performed. During texture magnification, the number of texels that need to be looked up for any pixel is always four or fewer; during minification, however, as the textured polygon moves farther away potentially the entire texture might fall into a single pixel. This would necessitate reading all of its texels and combining their values to correctly determine the pixel color, a prohibitively expensive operation. Mipmapping avoids this by prefiltering the texture and storing it in smaller sizes down to a single pixel. As the textured surface moves farther away, the texture being applied switches to the prefiltered smaller size. Different sizes of the mipmap are referred to as 'levels', with Level 0 being the largest size (used closest to the viewer), and increasing levels used at increasing distances. == Filtering methods == This section lists the most common texture filtering methods, in increasing order of computational cost and image quality. === Nearest-neighbor interpolation === Nearest-neighbor interpolation is the simplest and crudest filtering method — it simply uses the color of the texel closest to the pixel center for the pixel color. While simple, this results in a large number of artifacts - texture 'blockiness' during magnification, and aliasing and shimmering during minification. This method is fast during magnification but during minification the stride through memory becomes arbitrarily large and it can often be less efficient than MIP-mapping due to the lack of spatially coherent texture access and cache-line reuse. === Nearest-neighbor with mipmapping === This method still uses nearest neighbor interpolation, but adds mipmapping — first the nearest mipmap level is chosen according to distance, then the nearest texel center is sampled to get the pixel color. This reduces the aliasing and shimmering significantly during minification but does not eliminate it entirely. In doing so it improves texture memory access and cache-line reuse through avoiding arbitrarily large access strides through texture memory during rasterization. This does not help with blockiness during magnification as each magnified texel will still appear as a large rectangle. === Linear mipmap filtering === Less commonly used, OpenGL and other APIs support nearest-neighbor sampling from individual mipmaps whilst linearly interpolating the two nearest mipmaps relevant to the sample. === Bilinear filtering === In Bilinear filtering, the four nearest texels to the pixel center are sampled (at the closest mipmap level), and their colors are combined by weighted average according to distance. This removes the 'blockiness' seen during magnification, as there is now a smooth gradient of color change from one texel to the next, instead of an abrupt jump as the pixel center crosses the texel boundary. Bilinear filtering for magnification filtering is common. When used for minification it is often used with mipmapping; though it can be used without, it would suffer the same aliasing and shimmering problems as nearest-neighbor filtering when minified too much. For modest minification ratios, however, it can be used as an inexpensive hardware accelerated weighted texture supersample. The Nintendo 64 used an unusual version of bilinear filtering where only three pixels are used known as 3-point texture filtering, instead of four due to hardware optimization concerns. This introduces a noticeable "triangulation bias" in some textures. === Trilinear filtering === Trilinear filtering is a remedy to a common artifact seen in mipmapped bilinearly filtered images: an abrupt and very noticeable change in quality at boundaries where the renderer switches from one mipmap level to the next. Trilinear filtering solves this by doing a texture lookup and bilinear filtering on the two closest mipmap levels (one higher and one lower quality), and then linearly interpolating the results. This results in a smooth degradation of texture quality as distance from the viewer increases, rather than a series of sudden drops. Of course, closer than Level 0 there is only one mipmap level available, and the algorithm reverts to bilinear filtering. === Anisotropic filtering === Anisotropic filtering is the highest quality filtering available in current consumer 3D graphics cards. Simpler, "isotropic" techniques use only square mipmaps which are then interpolated using bi– or trilinear filtering. (Isotropic means same in all directions, and hence is used to describe a system in which all the maps are squares rather than rectangles or other quadrilaterals.) When a surface is at a high angle relative to the camera, the fill area for a texture will not be approximately square. Consider the common case of a floor in a game: the fill area is far wider than it is tall. In this case, none of the square maps are a good fit. The result is blurriness and/or shimmering, depending on how the fit is chosen. Anisotropic filtering corrects this by sampling the texture as a non-square shape. The goal is

  Read more →
• 

  Tandem Money

  Tandem is one of the UK's original challenger banks. Tandem is a digital bank with a mobile app, and no branches. The acquisition of Harrods Bank in 2017 allowed the company to provide services using the former's banking licence. Tandem Bank Limited is authorised by the Prudential Regulation Authority and regulated by the Financial Conduct Authority. Tandem has offices across the UK in Blackpool, Cardiff, Durham and London, employing over 500 people. == History == The company was founded by Ricky Knox, Matt Cooper and Michael Kent in 2014. In December 2016, Tandem announced that it had secured a £35 million investment from The Sanpower Group, the Chinese company that also owned the department store House of Fraser; however, £29 million of this investment was later revoked by Sanpower over concerns that the Chinese Government would object to the investment following increased restrictions on outbound investment in China. This resulted in a delay in the launch of Tandem's savings products, which, at the time of the revocation, was expected imminently and, more importantly, meant that Tandem volunteered the return of their banking license but retained all other permissions. In April 2018, Tandem launched fixed-term savings accounts, offering one-, two- and three-year terms through its app. === Acquisitions === In August 2017, it was announced that Tandem would fully acquire Harrods Bank, founded in 1893, in a deal that would bring a near-£200m loan book, over £300m of deposits and nearly £80 million of capital. Prior to its sale to Tandem Money, Harrods Bank catered for high-net-worth (HNW) individuals and operated from the Harrods store in Knightsbridge, London. It offered a variety of personal and business current and savings accounts, mortgages, foreign currency and gold bullion trading services. On 7 August 2017, Tandem Money Limited announced a deal to acquire 100% of Harrods Bank Limited shares. The purchase deal closed successfully on 11 January 2018. In March 2018, Tandem agreed to acquire Pariti Technologies Limited, developers of the Pariti money management application. In August 2020 Tandem acquired green home improvement loan specialists Allium Lending Group. It was announced on 8 February 2021 that Tandem had agreed to purchase the mortgage book from private bank Bank and Clients, consisting of 300 B&C customers for an undisclosed amount. In January 2022 Tandem Bank acquired consumer lender Oplo, creating a combined business with £1.2 billion of total assets. In April 2023, it was announced that Tandem had acquired money-sharing app Loop Money. At the time of the purchase, one of Loop's founders – Paul Pester – was also chairman at Tandem. == Features == Tandem Bank offers customers savings, mortgages, personal and secured loans, green home improvement loans and motor finance. In November 2022, the bank launched its new Tandem Marketplace, providing information and resources to help promote greener living.

  Read more →
• 

  RFPolicy

  The RFPolicy outlines a method for contacting vendors about security vulnerabilities found in their products. It was initially written in 2000 by hacker and security consultant Rain Forest Puppy. It was perhaps the second disclosure policy, following Simple Nomad's. The policy gives the vendor five working days to respond to the reporter of the bug. If the vendor fails to contact the reporter within those five days, the issue is recommended to be disclosed to the general community. The reporter should help the vendor reproduce the bug and work out a fix. The reporter should delay notifying the general community about the bug if the vendor provides feasible reasons for requiring so. If the vendor fails to respond or shuts down communication with the reporter of the problem within five working days, the reporter should disclose the issue to the general community. When issuing an alert or fix, the vendor should give the reporter proper credit for reporting the bug. Context for the history of vulnerability disclosure is available in a history article.

  Read more →
• 

  Common Image Generator Interface

  The Common Image Generator Interface (CIGI) (pronounced sig-ee), is an on-the-wire data protocol that allows communication between an Image Generator and its host simulation. The interface is designed to promote a standard way for a host device to communicate with an image generator (IG) within the industry. CIGI enables plug-and-play by standard-compliant image generator vendors and reduces integration costs when upgrading visual systems. == Background == Most high-end simulators do not have everything running on a single machine the way popular home software flight simulators are currently implemented. The airplane model is run on one machine, normally referred to as the host, and the out the window visuals or scene graph program is run on another, usually referred to as an Image Generator (IG). Frequently there are multiple IGs required to display the surrounding environment created by a host. CIGI is the interface between the 'host' and the IGs. The main goal of CIGI is to capitalize on previous investments through the use of a common interface. CIGI is designed to assist suppliers and integrators of IG systems with ease of integration, code reuse, and overall cost reduction. In the past most image generators provided their own proprietary interface; every host had to implement that interface making changing image generators a costly ordeal. CIGI was created to standardize the interface between the host and the image generator so that little modification would be needed to switch image generators. The CIGI initiative was largely spearheaded by The Boeing Company during the early 21st century. The latest version of CIGI (CIGI 4.0) was developed by the Simulation Interoperability Standards Organization (SISO) in the form of SISO-STD-013-2014, Standard for Common Image Generator Interface (CIGI), Version 4.0, dated 22 August 2014. SISO-STD-013-2014 is freely available from SISO. == Definitions == Image generator – In this context an image generator consists of one or more rendering channels that produce an image that can be used to visualize an “Out-The-Window” scene, or images produced by various sensor simulations such as Infra-red, Day TV, electro-optical, and night vision. Host simulation – In this context a “Host” is the computational system that provides information about the device being simulated so that the image generator can portray the correct scenery to the user. This information is passed via CIGI to the image generator. == Maturation == CIGI 4 is the latest version of the standard as was approved by the Simulation Interoperability Standards Organization on August 22, 2014. CIGI became an international SISO standard known as SISO-STD-013-2014; which contains the CIGI version 4.0 Interface Control Document (ICD). CIGI 4.0 is the official standard, published by SISO. Previous versions of CIGI were spearheaded by Boeing include CIGI v3.3, in November 2008, v3.2 April 2006, v3.1 June 2004, v3 November 2003, v2 in March 2002, and the original (v1) in March 2001 == Protocol dependencies == Typically, CIGI uses UDP as its transport protocol, but CIGI does not require a specific transport mechanism, only packet definition conformance. CIGI traffic does not have a well known port; however, the use of ports 8004-8005 has been widely adopted by commercial image generator vendors implementations. == Development tools == === Host Emulator === The Host Emulator can be used as a surrogate to manipulate the interface when a simulation Host is not available. It is a Windows-based image generator Host application used to develop, integrate and test image generators that use the CIGI protocol. It provides a graphical user interface (GUI) for the creation, modification and deletion of entities; manipulation of views; control of environmental attributes and phenomena; and other host functions. The Host Emulator has several features that are useful for integration and testing. A free-flight mode allows for fixed-wing and rotorcraft flight, movement along entity axes and free rotation using a joystick or a joystick-like widget. Scripting and record/playback features support regression testing, demonstrations and other tasks needing exact reproduction of certain sequences of events. A packet-level snoop feature allows the user to examine the contents of CIGI messages, image generator response times and latencies. A Heartbeat Monitor Window shows a graphical timing history of the Image Generator's data frame rate. Other features include explicit packet creation, animation control, missile flyouts and a situation display window (Host Emulator 3.x only). === Multi-Purpose Viewer === The Multi-Purpose Viewer (MPV) provides the basic functionality expected of an Image Generator, such as loading and displaying a terrain database, displaying entities and so forth. The Multi-Purpose Viewer can be used as a surrogate to manipulate the interface when a real Image Generator is not available. The MPV is capable of operating with both the Windows and Linux operating systems. === CIGI Class Library === The CCL is an object-oriented software interface that automatically handles message composition and decomposition (i.e. packing, unpacking and byte swapping to the ICD specification) on both the Host and Image Generator sides of the interface. The CCL interprets Host or Image Generator messages based on compile time parameters. It also performs error handling and translation between different versions of CIGI. Each packet type has its own class. The individual packet members are accessed through packet class accessors. Outgoing messages are constructed by placing each packet into the outgoing buffer using a streaming operator. Incoming messages are parsed using callback or event-based mechanisms that supply the using program with fully populated packet objects. === Current tool suite === A set of CIGI development tools are managed and maintained by the SISO CIGI Product Support Group. The latest packages are available on SourceForge. Comments/Suggestions to the package can be directed to the SISO discussion board at: https://discussions.sisostds.org/index.htm?A0=SAC-PSG-CIGI Archived 2017-09-13 at the Wayback Machine === Wireshark === Wireshark is a free and open source packet analyzer. It is used for network troubleshooting, analysis, software and communications protocol development, and education. Wireshark provides a dissector for CIGI packets. As of October 2016, “The CIGI dissector is fully functional for CIGI version 2 and 3. Version 1 is not yet implemented.” === Older versions of CIGI === A CIGI Interface Control Document (ICD) and development suite is available in open source format. The tools, ICD, and accompanying user documentation can be found and downloaded from the CIGI sourceforge web site. The SourceForge version of the MPV is limited in its support of CIGI data packets and is intended to grow as needs arise. The MPV uses CIGI 3 as its interface, but the MPV is backward-compatible with earlier CIGI versions through the use of the CCL. The MPV uses the Open Scene Graph library to render a scene. The scene graph is manipulated according to the CIGI commands received from the Host via the CCL. The MPV itself is an application layer that consists of a small kernel leveraging heavily on a plug-in architecture for ease of maintainability and flexibility. An implementer can implement the interface from scratch, however a full suite of integration tools is available. These tools consist of three elements. The Host Emulator (HE), the Multi-Purpose Viewer (MPV), and the CIGI Class Library (CCL).

  Read more →
• 

  UpScrolled

  UpScrolled is an Australian social media platform for microblogging and short-form online video sharing that was launched in June 2025 by Recursive Methods Pty Ltd. It was founded by Issam Hijazi. == History == UpScrolled was launched in June 2025 by Recursive Methods Pty Ltd. It was founded by Issam Hijazi, a Palestinian-Australian app developer. UpScrolled is backed by the Tech for Palestine incubator. In January 2026, UpScrolled saw increased attention and number of downloads after the acquisition of TikTok by a group of pro-Donald Trump US investors, including Larry Ellison, which led to calls to boycott TikTok and migrate to other apps. TikTok was alleged to be suppressing pro-Palestinian content, as well as news surrounding the killing of Alex Pretti in Minneapolis on the platform. UpScrolled subsequently climbed to the top 10 of Apple's App Store list of free apps. The app saw a reported 2,850% increase in downloads between 22 and 24 January 2026. As of 27 January 2026, UpScrolled "had been downloaded about 400,000 times in the US and 700,000 globally since launching in June 2025". The app became the most downloaded app in the Apple App store on 29 January 2026, following allegations that TikTok was suppressing videos and content opposed to Immigration and Customs Enforcement (ICE) under its new ownership. By 2 February 2026, UpScrolled had reached 2.5 million users. According to the Google Play Store and the Apple App Store, it has become the most downloaded social media app in the United States and Canada, with rising interest in the United Kingdom, France, Germany and Italy. On 14 February, UpScrolled was suspended from the Google Play Store; the suspension was reverted by 15 February. == Founder == Hijazi was born in Jordan. His parents and grandparents are from Safad, a northern Israeli city near the Lebanese border. He worked for IBM and Oracle prior to starting UpScrolled. Hijazi told Rest of World that he launched UpScrolled in response to Israel's genocide in Gaza which followed the October 7 attacks. He said, "I couldn't take it anymore. I lost family members in Gaza, and I didn't want to be complicit. So I was like, I'm done with this, I want to feel useful. I found this gap in the market, with a lot of people asking why there is no alternative to the Big Tech platforms for their content, which was getting censored." Hijazi also alleges that social media accounts that were posting pro-Palestinian content were getting shadow banned on larger platforms, and alleges that even his account was not exempt from being targeted by censors. Hijazi has further elaborated on the importance of social media independence to further the Palestinian cause. In January 2026, Web Summit Qatar announced that Hijazi would be an opening night speaker. Following the announcement, there was a surge in ticket sales for the summit. Hijazi lives in Sydney with his wife and daughter. He lost 60 family members during the Gaza war. == Features == UpScrolled's algorithm allows users to discover posts based on likes, comments, and shares with time decay and some randomness, all chronologically, with "no manipulation" according to the app's website. UpScrolled has an interface resembling a mix of Instagram and Twitter, allowing users to post and view text posts, photos, and videos. It also lets users send private messages to each other. The app is currently available for iOS and Android devices, with plans to upscale. UpScrolled does not include Israel as an option in its location selection menu. Cities such as Tel Aviv are included under "Occupied Territories of Palestine", and Palestine can also be set as the location. UpScrolled says that it is against censorship and shadow banning, and describes itself as "belong[ing] to the people who use it — not to hidden algorithms or outside agendas". Hijazi said, "The other platforms claim to be free speech platforms. But when it comes to anything on Palestine, that's a different story." UpScrolled states that it "does not tolerate hate speech, propaganda, or bad-faith behaviour, but it also refuses to silence voices quietly or without explanation". == User base and content == Al Jazeera reported that posts expressing pro-Palestinian sentiment or depicting the continued suffering in the Gaza Strip were "flooding" the app. Political and global issues such as the Gaza war are prominent. Content includes updates from the Gaza Freedom Flotilla, posts by doctors working in Gaza, video essays about Palantir’s influence within the military and calls for boycotts of Israel. It has been used by Gazans to crowdfund and record daily life. Celebrity users of UpScrolled include American labour activist Chris Smalls and actor Jacob Berger, both of whom were on the July 2025 Gaza Freedom Flotilla. Political figures have also joined UpScrolled, such as South African politician and Economic Freedom Fighters leader Julius Malema, and Islamic Revolutionary Guard Corps commander Esmail Qaani. One user said that most early users were attracted to the platform for the opportunity to criticize Zionism. The Jewish Telegraphic Agency (JTA) reported that UpScrolled was observed to be "flooded" with antisemitic and anti-Israel content, including Holocaust denial and accusations that Israel carried out the 9/11 attacks. In a statement, UpScrolled said, "Our content moderation hasn't been able to keep up with the massive rise of users this week. We're working with digital rights experts to grow our Trust & Safety team and are beefing up our content moderation to prevent this. We apologise to all impacted users, thank you for being part of Upscrolled." The Times reported in February 2026 that UpScrolled was hosting content that could potentially breach UK law, including antisemitic content and posts promoting Hamas, Hezbollah, Islamic State and Al-Qaeda, as well as footage of the 2019 Christchurch mosque shootings and content praising the perpetrators of the 2019 Halle synagogue shooting and 2018 Pittsburgh synagogue shooting. Antisemitic influencers Lucas Gage, Jake Shields, Stew Peters and Anastasia Maria Loupis have accounts on UpScrolled. UpScrolled’s policies prohibit threats, glorification of harm or support for terrorist or violent groups. Hijazi said harmful content was being uploaded to UpScrolled and the company had expanded its content moderation team and upgraded its technology infrastructure to deal with the issue. In May 2026, Moment magazine said that users had identified some antisemitic content, pornography and extremist videos on the platform. The magazine said there were gaps in content moderation due to the small size of the developer team. == Reception == In January 2026, the Council on American–Islamic Relations (CAIR) praised UpScrolled for "pledging to protect the free flow of ideas on its platform, including both support for and opposition to the Israeli government's human rights abuses." Guy Christensen, a pro-Palestinian social media celebrity, has encouraged his audience to download UpScrolled. Christensen characterized UpScrolled as having "no censorship, no ownership by billionaires who put their interests and biases onto you to control you". He compared the platform to others like TikTok, saying that Israel is behind censorship that wouldn't happen on UpScrolled. Jaigris Hodson, an associate professor of Interdisciplinary Studies at Royal Roads University in Canada, has argued that "Network effects mean that unless UpScrolled continues its explosive growth, people are unlikely to continue to choose it over the more established TikTok. At best, we might see a Twitter/X effect, which is where TikTok will host more pro-U.S. government content creators and those people who want to follow them, and UpScrolled will host more critical content creators and their followers."

  Read more →
• 

  EfficientNet

  EfficientNet is a family of convolutional neural networks (CNNs) for computer vision published by researchers at Google AI in 2019. Its key innovation is compound scaling, which uniformly scales all dimensions of depth, width, and resolution using a single parameter. EfficientNet models have been adopted in various computer vision tasks, including image classification, object detection, and segmentation. == Compound scaling == EfficientNet introduces compound scaling, which, instead of scaling one dimension of the network at a time, such as depth (number of layers), width (number of channels), or resolution (input image size), uses a compound coefficient ϕ {\displaystyle \phi } to scale all three dimensions simultaneously. Specifically, given a baseline network, the depth, width, and resolution are scaled according to the following equations: depth multiplier: d = α ϕ width multiplier: w = β ϕ resolution multiplier: r = γ ϕ {\displaystyle {\begin{aligned}{\text{depth multiplier: }}d&=\alpha ^{\phi }\\{\text{width multiplier: }}w&=\beta ^{\phi }\\{\text{resolution multiplier: }}r&=\gamma ^{\phi }\end{aligned}}} subject to α ⋅ β 2 ⋅ γ 2 ≈ 2 {\displaystyle \alpha \cdot \beta ^{2}\cdot \gamma ^{2}\approx 2} and α ≥ 1 , β ≥ 1 , γ ≥ 1 {\displaystyle \alpha \geq 1,\beta \geq 1,\gamma \geq 1} . The α ⋅ β 2 ⋅ γ 2 ≈ 2 {\displaystyle \alpha \cdot \beta ^{2}\cdot \gamma ^{2}\approx 2} condition is such that increasing ϕ {\displaystyle \phi } by a factor of ϕ 0 {\displaystyle \phi _{0}} would increase the total FLOPs of running the network on an image approximately 2 ϕ 0 {\displaystyle 2^{\phi _{0}}} times. The hyperparameters α {\displaystyle \alpha } , β {\displaystyle \beta } , and γ {\displaystyle \gamma } are determined by a small grid search. The original paper suggested 1.2, 1.1, and 1.15, respectively. Architecturally, they optimized the choice of modules by neural architecture search (NAS), and found that the inverted bottleneck convolution (which they called MBConv) used in MobileNet worked well. The EfficientNet family is a stack of MBConv layers, with shapes determined by the compound scaling. The original publication consisted of 8 models, from EfficientNet-B0 to EfficientNet-B7, with increasing model size and accuracy. EfficientNet-B0 is the baseline network, and subsequent models are obtained by scaling the baseline network by increasing ϕ {\displaystyle \phi } . == Variants == EfficientNet has been adapted for fast inference on edge TPUs and centralized TPU or GPU clusters by NAS. EfficientNet V2 was published in June 2021. The architecture was improved by further NAS search with more types of convolutional layers. It also introduced a training method, which progressively increases image size during training, and uses regularization techniques like dropout, RandAugment, and Mixup. The authors claim this approach mitigates accuracy drops often associated with progressive resizing.

  Read more →
• 

  Secure environment

  In computing, a secure environment is any system which implements the controlled storage and use of information. In the event of computing data loss, a secure environment is used to protect personal or confidential data. It may also be known as a trusted execution environment (TEE). Often, secure environments employ cryptography as a means to protect information. This is typically used for processing confidential or restricted information. Some secure environments employ cryptographic hashing, simply to verify that the information has not been altered since it was last modified.

  Read more →
• 

  Device-independent pixel

  A device-independent pixel (also: density-independent pixel, dip, dp) is a unit of length. A typical use is to allow mobile device software to scale the display of information and user interaction to different screen sizes. The abstraction allows an application to work in pixels as a measurement, while the underlying graphics system converts the abstract pixel measurements of the application into real pixel measurements appropriate to the particular device. For example, on the Android operating system a device-independent pixel is equivalent to one physical pixel on a 160 dpi screen, while the Windows Presentation Foundation specifies one device-independent pixel as equivalent to 1/96th of an inch. As dp is a physical unit it has an absolute value which can be measured in traditional units, e.g. for Android devices 1 dp equals 1/160 of inch or 0.15875 mm. While traditional pixels only refer to the display of information, device-independent pixels may also be used to measure user input such as input on a touch screen device.

  Read more →