AI Writing Helper

AI Writing Helper — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • TalkBack

    TalkBack

    TalkBack is an accessibility service for the Android operating system that helps blind and visually impaired users to interact with their devices. It uses spoken words, vibration and other audible feedback to allow the user to know what is happening on the screen allowing the user to better interact with their device. The service is pre-installed on many Android devices, and it became part of the Android Accessibility Suite in 2017. According to the Google Play Store, the Android Accessibility Suite has been downloaded over five billion times, including devices that have the suite preinstalled. == Open-source == Google releases the source code of TalkBack with some releases of the accessibility service to GitHub, with the latest of these changes being from May 6, 2021. The source for these versions of Google TalkBack have been released under the Apache License version 2.0. == Release history ==

    Read more →
  • Cancer Likelihood in Plasma

    Cancer Likelihood in Plasma

    Cancer Likelihood in Plasma (CLiP) refers to a set of ensemble learning methods for integrating various genomic features useful for the noninvasive detection of early cancers from blood plasma. An application of this technique for early detection of lung cancer (Lung-CLiP) was originally described by Chabon et al. (2020) from the labs of Ash Alizadeh and Max Diehn at Stanford. This method relies on several improvements to cancer personalized profiling by deep sequencing (CAPP-Seq) for analysis of circulating tumor DNA (ctDNA). The CLiP technique integrates multiple distinctive genomic features of a cancer of interest findings within a machine-learning framework for cancer detection. For example, studies have shown that the majority of somatic mutations found in cell-free DNA (cfDNA) are not tumor derived, but instead reflect clonal hematopoeisis (also known as CHIP). Even though CHIP tends to target specific genes, it also involves many generally non-recurrent mutations that can be shed from leukocytes and detected in cfDNA, regardless of whether profiling patients with cancer and healthy adults. However, genuine tumor derived ctDNA mutations can be distinguished from CHIP-derived mutations. This is because unlike tumor-derived mutations, CHIP-derived mutations that are shed from leukocytes into plasma tend to occur on longer cfDNA fragments, and to lack specific mutational signatures such as those associated with tobacco smoking in lung cancer that are also found in tumor derived ctDNA molecules. CLiP integrates these features within hierarchical ensemble machine learning models that consider somatic mutations and copy number alternations, among other features. While the CLiP method is unique in relying exclusively on mutations and copy number alterations, it is related to a variety of other liquid biopsy methods being commercially developed for early cancer detection using ctDNA and proteins (e.g., CancerSEEK / DETECT-A ), cfDNA fragmentation patterns (e.g., DELFI), and DNA methylation (e.g., cfMeDIP-Seq, Grail). While the CLiP method has not yet been broadly applied for population-based cancer screening, it has been shown to distinguish discriminate early-stage lung cancers from risk-matched controls across multiple cohorts of patients enrolled across the US.

    Read more →
  • Taxonomic database

    Taxonomic database

    A taxonomic database is a database created to hold information on biological taxa – for example groups of organisms organized by species name or other taxonomic identifier – for efficient data management and information retrieval. Taxonomic databases are routinely used for the automated construction of biological checklists such as floras and faunas, both for print publication and online; to underpin the operation of web-based species information systems; as a part of biological collection management (for example in museums and herbaria); as well as providing, in some cases, the taxon management component of broader science or biology information systems. They are also a fundamental contribution to the discipline of biodiversity informatics. == Goals == Taxonomic databases digitize scientific biodiversity data and provide access to taxonomic data for research. Taxonomic databases vary in breadth of the groups of taxa and geographical space they seek to include, for example: beetles in a defined region, mammals globally, or all described taxa in the tree of life. A taxonomic database may incorporate organism identifiers (scientific name, author, and – for zoological taxa – year of original publication), synonyms, taxonomic opinions, literature sources or citations, illustrations or photographs, and biological attributes for each taxon (such as geographic distribution, ecology, descriptive information, threatened or vulnerable status, etc.). Some databases, such as the Global Biodiversity Information Facility(GBIF) database and the Barcode of Life Data System, store the DNA barcode of a taxon if one exists (also called the Barcode Index Number (BIN) which may be assigned, for example, by the International Barcode of Life project (iBOL) or UNITE, a database for fungal DNA barcoding). A taxonomic database aims to accurately model the characteristics of interest that are relevant to the organisms which are in scope for the intended coverage and usage of the system. For example, databases of fungi, algae, bryophytes and vascular plants ("higher plants") encode conventions from the International Code of Botanical Nomenclature while their counterparts for animals and most protists encode equivalent rules from the International Code of Zoological Nomenclature. Modelling the relevant taxonomic hierarchy for any taxon is a natural fit with the relational model employed in almost all database systems. Scientific consensus is not reached for all taxon groups, and new species continue to be described; therefore, another goal of taxonomic databases is to aid in resolving conflicts of scientific opinion and unify taxonomy. == History == Possibly the earliest documented management of taxonomic information in computerised form comprised the taxonomic coding system developed by Richard Swartz et al. at the Virginia Institute of Marine Science for the Biota of Chesapeake Bay and described in a published report in 1972. This work led directly or indirectly to other projects with greater profile including the NODC Taxonomic Code system which went through 8 versions before being discontinued in 1996, to be subsumed and transformed into the still current Integrated Taxonomic Information System (ITIS). A number of other taxonomic databases specializing in particular groups of organisms that appeared in the 1970s through to the present jointly contribute to the Species 2000 project, which since 2001 has been partnering with ITIS to produce a combined product, the Catalogue of Life. While the Catalogue of Life currently concentrates on assembling basic name information as a global species checklist, numerous other taxonomic database projects such as Fauna Europaea, the Australian Faunal Directory, and more supply rich ancillary information including descriptions, illustrations, maps, and more. Many taxonomic database projects are currently listed at the TDWG "Biodiversity Information Projects of the World" site. == Issues == The representation of taxonomic information in machine-encodable form raises a number of issues not encountered in other domains, such as variant ways to cite the same species or other taxon name, the same name used for multiple taxa (homonyms), multiple non-current names for the same taxon (synonyms), changes in name and taxon concept definition through time, and more. Non-standardized categories and metadata in taxonomic databases hampers the ability for researchers to analyze the data. One forum that has promoted discussion and possible solutions to these and related problems since 1985 is the Biodiversity Information Standards (TDWG), originally called the Taxonomic Database Working Group. While online databases have great benefits (for example, increased access to taxonomic information), they also have issues such as data integrity risks due to on- and off-line versions and continuous updates, technical access issues due to server or internet outage, and differing capacities for complex queries to extract taxonomic data into lists. As the quantity of information in online taxonomic databases rapidly expands, data aggregation, and the integration and alignment of non-standardized data across databases, is a big challenge in taxonomy and biodiversity informatics.

    Read more →
  • Ontology alignment

    Ontology alignment

    Ontology alignment, or ontology matching, is the process of determining correspondences between concepts in ontologies. A set of correspondences is also called an alignment. The phrase takes on a slightly different meaning, in computer science, cognitive science or philosophy. == Computer science == For computer scientists, concepts are expressed as labels for data. Historically, the need for ontology alignment arose out of the need to integrate heterogeneous databases, ones developed independently and thus each having their own data vocabulary. In the Semantic Web context involving many actors providing their own ontologies, ontology matching has taken a critical place for helping heterogeneous resources to interoperate. Ontology alignment tools find classes of data that are semantically equivalent, for example, "truck" and "lorry". The classes are not necessarily logically identical. According to Euzenat and Shvaiko (2007), there are three major dimensions for similarity: syntactic, external, and semantic. Coincidentally, they roughly correspond to the dimensions identified by Cognitive Scientists below. A number of tools and frameworks have been developed for aligning ontologies, some with inspiration from Cognitive Science and some independently. Ontology alignment tools have generally been developed to operate on database schemas, XML schemas, taxonomies, formal languages, entity-relationship models, dictionaries, and other label frameworks. They are usually converted to a graph representation before being matched. Since the emergence of the Semantic Web, such graphs can be represented in the Resource Description Framework line of languages by triples of the form , as illustrated in the Notation 3 syntax. In this context, aligning ontologies is sometimes referred to as "ontology matching". The problem of Ontology Alignment has been tackled recently by trying to compute matching first and mapping (based on the matching) in an automatic fashion. Systems like DSSim, X-SOM or COMA++ obtained at the moment very high precision and recall. The Ontology Alignment Evaluation Initiative aims to evaluate, compare and improve the different approaches. === Formal definition === Given two ontologies i = ⟨ C i , R i , I i , T i , V i ⟩ {\displaystyle i=\langle C_{i},R_{i},I_{i},T_{i},V_{i}\rangle } and j = ⟨ C j , R j , I j , T j , V j ⟩ {\displaystyle j=\langle C_{j},R_{j},I_{j},T_{j},V_{j}\rangle } where C {\displaystyle C} is the set of classes, R {\displaystyle R} is the set of relations, I {\displaystyle I} is the set of individuals, T {\displaystyle T} is the set of data types, and V {\displaystyle V} is the set of values, we can define different types of (inter-ontology) relationships. Such relationships will be called, all together, alignments and can be categorized among different dimensions: similarity vs logic: this is the difference between matchings (predicating about the similarity of ontology terms), and mappings (logical axioms, typically expressing logical equivalence or inclusion among ontology terms) atomic vs complex: whether the alignments we considered are one-to-one, or can involve more terms in a query-like formulation (e.g., LAV/GAV mapping) homogeneous vs heterogeneous: do the alignments predicate on terms of the same type (e.g., classes are related only to classes, individuals to individuals, etc.) or we allow heterogeneity in the relationship? type of alignment: the semantics associated to an alignment. It can be subsumption, equivalence, disjointness, part-of or any user-specified relationship. Subsumption, atomic, homogeneous alignments are the building blocks to obtain richer alignments, and have a well defined semantics in every Description Logic. Let's now introduce more formally ontology matching and mapping. An atomic homogeneous matching is an alignment that carries a similarity degree s ∈ [ 0 , 1 ] {\displaystyle s\in [0,1]} , describing the similarity of two terms of the input ontologies i {\displaystyle i} and j {\displaystyle j} . Matching can be either computed, by means of heuristic algorithms, or inferred from other matchings. Formally we can say that, a matching is a quadruple m = ⟨ i d , t i , t j , s ⟩ {\displaystyle m=\langle id,t_{i},t_{j},s\rangle } , where t i {\displaystyle t_{i}} and t j {\displaystyle t_{j}} are homogeneous ontology terms, s {\displaystyle s} is the similarity degree of m {\displaystyle m} . A (subsumption, homogeneous, atomic) mapping is defined as a pair μ = ⟨ t i , t j ⟩ {\displaystyle \mu =\langle t_{i},t_{j}\rangle } , where t i {\displaystyle t_{i}} and t j {\displaystyle t_{j}} are homogeneous ontology terms. == Cognitive science == For cognitive scientists interested in ontology alignment, the "concepts" are nodes in a semantic network that reside in brains as "conceptual systems." The focal question is: if everyone has unique experiences and thus different semantic networks, then how can we ever understand each other? This question has been addressed by a model called ABSURDIST (Aligning Between Systems Using Relations Derived Inside Systems for Translation). Three major dimensions have been identified for similarity as equations for "internal similarity, external similarity, and mutual inhibition." == Ontology alignment methods == Two sub research fields have emerged in ontology mapping, namely monolingual ontology mapping and cross-lingual ontology mapping. The former refers to the mapping of ontologies in the same natural language, whereas the latter refers to "the process of establishing relationships among ontological resources from two or more independent ontologies where each ontology is labelled in a different natural language". Existing matching methods in monolingual ontology mapping are discussed in Euzenat and Shvaiko (2007). Approaches to cross-lingual ontology mapping are presented in Fu et al. (2011).

    Read more →
  • Dark data

    Dark data

    Dark data is data which is acquired through various computer network operations but not used in any manner to derive insights or for decision making. The ability of an organisation to collect data can exceed the throughput at which it can analyse the data. In some cases the organisation may not even be aware that the data is being collected. IBM estimate that roughly 90 percent of data generated by sensors and analog-to-digital conversions never get used. In an industrial context, dark data can include information gathered by sensors and telematics. Organizations retain dark data for a multitude of reasons, and it is estimated that most companies are only analyzing 1% of their data. Often it is stored for regulatory compliance and record keeping. Some organizations believe that dark data could be useful to them in the future, once they have acquired better analytic and business intelligence technology to process the information. Because storage is inexpensive, storing data is easy. However, storing and securing the data usually entails greater expenses (or even risk) than the potential return profit. In academic discourse, the term dark data was essentially coined by Bryan P. Heidorn. He uses it to describe research data, especially from the long tail of science (the many, small research projects), which are not or no longer available for research because they disappear in a drawer without adequate data management. Without this, the data become dark, and further reasons for this are e.g. missing metadata annotation, missing data management plans and data curators. == Analysis == The term "dark data" very often refers to data that is not amenable to computer processing. For example, a company might have a great deal of data that exists only as scanned page-images. Even the bare text in such documents is not available without something like Optical character recognition, which can vary greatly in accuracy. Even with OCR, the significance of each part of the data is unavailable. An obvious examples is whether a capitalized word is a name or not, and if so, whether it represents a person, place, organization, or even a work of art. Bibliographic and other references, data within tables (that may be labeled quite adequately for humans, but not for processing), and countless assertions represented with the full complexity and ambiguity of human language. A lot of unused data is very valuable, and would be used if it could be; but is blocked because it is in formats that are difficult to process, categorise, identify, and analyse. Often the reason that business does not use their dark data is because of the amount of resources it would take and the difficulty of having that data analysed. In other words, the data is "dark" not because it is not used, but because it cannot (feasibly or affordably) be used, given its poor representation. There are many data representations that can make data much more accessible for automation. However, a great deal of information lacks any such identification of information items or relationships; and much more loses it during "downhill" conversion such as saving to page-oriented representations, printing, scanning, or faxing. The journey back "uphill" can be costly. According to Computer Weekly, 60% of organisations believe that their own business intelligence reporting capability is "inadequate" and 65% say that they have "somewhat disorganised content management approaches". == Relevance == Useful data may become dark data after it becomes irrelevant, as it is not processed fast enough. This is called "perishable insights" in "live flowing data". For example, if the geolocation of a customer is known to a business, the business can make offer based on the location, however if this data is not processed immediately, it may be irrelevant in the future. According to IBM, about 60 percent of data loses its value immediately. == Storage == According to the New York Times, 90% of energy used by data centres is wasted. If data was not stored, energy costs could be saved. Furthermore, there are costs associated with the underutilisation of information and thus missed opportunities. According to Datamation, "the storage environments of EMEA organizations consist of 54 percent dark data, 32 percent redundant, obsolete and trivial data and 14 percent business-critical data. By 2020, this can add up to $891 billion in storage and management costs that can otherwise be avoided." The continuous storage of dark data can put an organisation at risk, especially if this data is sensitive. In the case of a breach, this can result in serious repercussions. These can be financial, legal and can seriously hurt an organisation's reputation. For example, a breach of private records of customers could result in the stealing of sensitive information, which could result in identity theft. Another example could be the breach of the company's own sensitive information, for example relating to research and development. These risks can be mitigated by assessing and auditing whether this data is useful to the organisation, employing strong encryption and security and finally, if it is determined to be discarded, then it should be discarded in a way that it becomes unretrievable. == Future == It is generally considered that as more advanced computing systems for analysis of data are built, the higher the value of dark data will be. It has been noted that "data and analytics will be the foundation of the modern industrial revolution". Of course, this includes data that is currently considered "dark data" since there are not enough resources to process it. All this data that is being collected can be used in the future to bring maximum productivity and an ability for organisations to meet consumers' demand. Technology advancements are helping to leverage this dark data affordably. Furthermore, many organisations do not realise the value of dark data right now, for example in healthcare and education organisations deal with large amounts of data that could create a significant "potential to service students and patients in the manner in which the consumer and financial services pursue their target population".

    Read more →
  • Documentation science

    Documentation science

    Documentation science is the study of the recording and retrieval of information. It includes methods for storing, retrieving, and sharing of information captured on physical as well as digital documents. This field is closely linked to the fields of library science and information science but has its own theories and practices. The term documentation science was coined by Belgian lawyer and peace activist Paul Otlet. He is considered to be the forefather of information science. He along with Henri La Fontaine laid the foundations of documentation science as a field of study. Professionals in this field are called documentalists. Over the years, documentation science has grown to become a large and important field of study. Evolving from traditional practices like archiving and retrieval to modern theories about the nature of documents, novel methods for organizing digital information, and applications in libraries, research, healthcare, business, and technology and more. This field continues to evolve in the digital age. == Developments in documentation science == 1895: The International Institute of Bibliography (originally Institut International de Bibliographie, IIB) was established on 12 September 1895, in Brussels, Belgium by Paul Otlet and Henri La Fontaine. It aimed to catalog all recorded knowledge using a universal classification system now known as the Universal Decimal Classification (UDC). 1931: International Institute of Bibliography (originally Institut International de Bibliographie, IIB) was renamed The International Institute for Documentation, (Institut International de Documentation, IID). 1934: Paul Otlet envisioned a “radiated library,” a global network of interconnected documents accessible from anywhere via telecommunication. This early idea is now seen as a forerunner of the internet. 1937: American Documentation Institute was founded (1968 nameshift to American Society for Information Science). 1951: Suzanne Briet published Qu'est-ce que la documentation? where she proposed that “a document is evidence in support of a fact,” expanding the definition to include objects such as animals in zoos when they are part of a scientific study. This was a significant theoretical shift in defining documents. 1965-1990: Documentation departments were established, for example, large research libraries, online computer retrieval systems and more. The persons doing the searches were called documentalists. But with the appearance of first CD-ROM databases in the mid-1980s and later the internet in 1990s, these intermediary searches decreased and most such departments closed or merged with other departments. 1996: "Dokvit", Documentation Studies, was established in 1996 at the University of Tromsø in Norway. 2001: The Document Academy was established. It is an international network that celebrates documentation. It was conducted by The Program of Documentation Studies, University of Tromsø, Norway and The School of Information Management and Systems, UC Berkeley. 2003: The first Document Research Conference (DOCAM), a series of conferences made by the Document Academy. DOCAM '03 (2003) was held 13–15 August 2003 at The School of Information Management and Systems (SIMS) at the University of California, Berkeley. 2007: Michael Buckland, Ronald Day, and Birger Hjørland expanded the theoretical foundations of documentation science. They researched and explored documents to be social artifacts, the role of ideology in classification, and how documents influenced knowledge systems. 2010s: The concept of post-documentation or “documentality” began in the 2010s, which focused on how digital traces (e.g., tweets, logs) function as documents without traditional physical form. This led to new thinking in document theory. 2016–present: The Document Academy's DOCAM conferences have continued, offering ongoing developments in the theory and practice of documentation. Themes include affect, memory, activism, and born-digital records. 2017: The journal Information Research published special issues addressing “document theory,” including views on documentation in virtual environments and digital archives. 2020–present: The growth of research data management (RDM) and open science has made documentation practices central to data sharing, metadata standards, and reproducibility in scientific work. == Theoretical foundations == Documentation science has some deep theories that explain what a document is, how people use documents, and how they are organized. These concepts were introduced by scholars who have not only studied libraries, but also philosophy, language, and social sciences. Suzanne Briet described a document as “any material form of evidence” that is made to be used as proof or to share information. An antelope in a zoo, for example, can be a document because it is being studied, classified, and described. Documents are not just things or materials but are also shaped by society. Michael Buckland noted that documents have meaning only when people agree they are useful or valid as information. He explained a document becomes a document when someone decides to use it as evidence. Ronald Day wrote about how documentation is not neutral, it can be influenced by power, ideology, and politics. He claimed that classification systems, like how libraries organize books, are not just technical tools. They also show what kinds of knowledge are seen as more important than others. In recent years, new theories have been introduced, like “documentality” by Maurizio Ferraris. He proposed that a document does not have to be a paper or file, it can also be something digital like a tweet, a database entry, or a log file, as long as it leaves a trace that can be looked at later. This theory helps explain modern digital documents. == Methodologies and practice == Documentation science includes many methods that help people collect, organize, store, and find information. These practices are used in libraries, archives, research labs, companies, and now also in online systems. === Collecting and creating documents === In the past, documentation work included gathering books, articles, reports, and other printed materials. People created records of these materials manually, using catalog cards, indexes, or bibliographies. Paul Otlet’s work with the Universal Bibliographic Repertory is one example. He created millions of card entries to organize knowledge from around the world. Today, documents are not only created by humans. Computers and machines also generate documents, like log files, metadata, and sensor data. These need new tools and methods for collection and management. === Organizing information === Organizing documents has always been a foundational element of documentation science. Methods like classification (dividing things into groups) and indexing (making lists of topics or keywords) help individuals find what they need. A widely used system is the Universal Decimal Classification (UDC) developed by Otlet and La Fontaine. Another is the Library of Congress Classification (LCC) used in the majority of U.S. libraries. Indexing can be performed by humans or by software programs that read the text and add tags to documents. Metadata is also used to describe documents. Metadata is “data about data” like the title, author, date, and subject of a document. Standards like Dublin Core are used in digital libraries to keep metadata consistent. === Retrieval and access === One of the main objectives of documentation is helping users find the right document. This is called information retrieval. In the past, this meant using catalog drawers or printed indexes. Today, people use search engines, databases, and digital libraries. Modern retrieval tools use Boolean logic, ranking algorithms, and sometimes machine learning to show the most useful results first. This is part of what is studied in both documentation science and information retrieval. === Preservation and archiving === Documents require long-term storage. This is called preservation of documents. Printed documents can be damaged by light, pests, or even time on the other hand digital documents can be deemed worthless if formats become outdated or storage facilities fail. Archivists use methods like migration, which includes moving files to new formats, and emulation, which replicates obsolete systems, to preserve materials. These methods and tools are ever changing as new technologies develop. But the main objective of documentation has remained the same, which is to keep information safe, organized, and easy to find. == Documentation in the digital age == With the expansion of the internet, computers, and cloud storage, documents are no longer just books, papers, or reports. They can now be emails, tweets, videos, websites, databases, or even log files created by machines. === Born-digital documents === Many documents today are created directly in digital form. These are called born-digit

    Read more →
  • Document capture software

    Document capture software

    Document capture software refers to applications that provide the ability and feature set to automate the process of scanning paper documents or importing electronic documents, often for the purposes of feeding advanced document classification and data collection processes. Most scanning hardware, both scanners and copiers, provides the basic ability to scan to any number of image file formats, including: PDF, TIFF, JPG, BMP, etc. This basic functionality is augmented by document capture software, which can add efficiency and standardization to the process. == Typical features == Typical features of Document Capture Software include: Barcode recognition Patch Code recognition Separation Optical Character Recognition (OCR) Optical Mark Recognition (OMR) Quality Assurance Indexing Migration === Goal for implementation of a document capture solution === The goal for implementing a document capture solution is to reduce the amount of time spent scanning, separating, enhancing, organizing, classifying, normalizing, and collecting information from document collections, and to produce metadata along with an image/PDF file, and/or OCR text. This information is then migrated to a file share, FTP site, database, Document Management or Enterprise Content Management system. These systems often provide a search function, allowing search of the assets based on the produced metadata, and then viewed using document imaging software. == General document capture system solutions == === Integration with document management system === ECM (Enterprise Content management) and their DMS component (Document Management System) are being adopted by many organizations as a corporate document management system for all types of electronic files, e.g. MS word, PDF ... However, much of the information held by organisations is on paper and this needs to be integrated within the same document repository. By converting paper documents into digital format through scanning, organizations convert paper into image formats such as TIF, JPG, and PDF, and also extract valuable index information or business data from the document using OCR technology. Digital documents and associated metadata can easily be stored in the ECM in a variety of formats. The most popular of these formats is PDF which not only provides an accurate representation of the document but also allows all the OCR text in the document to be stored behind the PDF image. This format is known as PDF with hidden text or text-searchable PDF. This allows users to search for documents by using keywords in the metadata fields or by searching the content of PDF files across the repository. ==== Advantages of scanning documents into a ECM/DMS ==== Information held on paper is usually just as valuable to organisations as the electronic documents that are generated internally. Often this information represents a large proportion of the day to day correspondence with suppliers and customers. Having the ability to manage and share this information internally through a document management system such as SharePoint or a CMIS-compatible repository improves collaboration between departments or employees and also eliminates the risk of losing this information through disasters such as floods or fire. Organisations adopting an ECM/DMS often implement electronic workflow which allows the information held on paper to be included as part of an electronic business process and incorporated into a customer record file along with other associated office documents and emails. For business critical documents, such as purchase orders and supplier invoices, digitising documents helps speed up business transactions as well as reduce manual effort involved in keying data into business systems, such as CRM, ERP and Accounting. Scanned invoices can also be routed to managers for payment approval via email or an electronic workflow. == Electronic document capture == In the earlier implementations of Document Capture Software, the technology focused solely on the digitization and capture of information from paper documents. Document images were acquired from document scanners via TWAIN/ISIS drivers. Only image-based file formats like TIF, JPG, and BMP were typically compatible with these solutions. But in recent years, as the volume of electronically-created documents and the number of proprietary file formats continues to increase at exponential rates, the need for handling documents existing in electronic formats has grown. The relevant document capture products have adapted to function with non-image file formats with the end-goal of creating a unified processing workflow capable of handling all incoming documents The ability to import files from a variety of sources is one example of such adaptation. Importing documents from ECM/DMS software solutions, email servers, FTP, and EDI is now as much of a requirement of document capture software as is paper capture. The normalization of output files to text-based PDF format is now another critical factor in long-term archival of proprietary electronic file formats. Normalization expands access and usage of files to users throughout the enterprise, rather than only those that created the original electronic file.

    Read more →
  • Knowledge organization system

    Knowledge organization system

    Knowledge organization system (KOS), concept system, or concept scheme is the generic term used in knowledge organization (KO) for the selection of concepts with an indication of selected semantic relations. Despite their differences in type, coverage, and application, all KOS aim to support the organization of knowledge and information to facilitate their management and retrieval. KOS vary in complexity from simple sorted lists to complex relational networks. They represent both structural and functional features, and serve to eliminate ambiguity, control synonyms, establish relationships, and present properties. From their origins in library and information science (LIS), KOS have been applied to other domains and disciplines within science and industry, although scholarly research and debate remain primarily within the KO field. Challenges of KOS include ambiguity of terminology, repercussions of biased systems, and potential obsolescence. KOS can be expressed in RDF and RDFS as per the Simple Knowledge Organization System (SKOS) recommendation by W3C, which aims to enable the sharing and linking of KOS via the Web. One of the largest collections of KOS is the BARTOC registry. == Types == While different schema of KOS have been proposed, most are generally arranged in terms of the complexity of their construction and maintenance. Some scholars argue that organizing KOS on a spectrum oversimplifies the shared characteristics among them, and may even result in a non-ideal structure being chosen. The following types are not exhaustive, and are often not mutually-exclusive in practice. === Term lists === Term lists are the least structured form of KOS. They include lists, glossaries, dictionaries, and synonym rings. Authority files and gazetteers may also be considered term lists, however other scholars categorize them and directories as "metadata-like models". Examples include the Union List of Artist Names name authority file and the GeoNames gazetteer. === Categorization and classification === KOS that emphasize specific (and often hierarchical) structures include subject headings, taxonomies, categorization schema, and classification schema & systems. Despite inconsistent use of the terms "categorization" and "classification" in some literature, categorization is generally loosely-assembled grouping schema and may include attributes that are not mutually exclusive (or having fuzzy boundaries), while classification is related to the arrangement of non-overlapping and mutually-exclusive classes. Classification schema may be universal (such as Dewey Decimal Classification and Information Coding Classification) or domain-specific (such as the National Library of Medicine Classification). === Relationship models === The types of KOS with greatest complexity and which utilize connections between concepts include thesauri, semantic networks, and ontologies. One of the most prominent examples of a semantic network is WordNet. === Others === Certain structures proposed to be considered types of KOS—but are not consistently included in schema—include folksonomies, topic maps, web directory structures, publication organization systems, and bibliometric maps. Some KOS organize other KOS themselves—for instance, PeriodO is a gazetteer of periodization categories. == Applications == Some early KOS were developed as a support system for abstracting and indexing services to be used by specially-trained searchers. With the growth of information digitization, usability became increasingly accessible, and more complex structures were developed. Prominent examples of KOS outside of LIS include organism taxonomy in biology, the periodic table of elements in chemistry, SIC and NAICS classification systems for industry & business, and AGROVOC agricultural controlled vocabulary. == Challenges == The study and design of KOS is an ongoing topic of discussion among KO scholars. === Terminology === [There is] a serious lack of vocabulary control in the literature on controlled vocabulary. Inconsistency of terminology within the study of KOS is a common issue. For instance, "ontology" is used for both a specific type of KOS as well as a generic term for any KOS. The terms "taxonomy", "classification", and "categorization" are also sometimes used interchangeably. === Bias === As knowledge can be historically and culturally biased, scholars have also discussed how KOS themselves can perpetuate harmful practices or stereotypes. For example, a number of concerns and criticisms about the classification of mental disorders in the Diagnostic and Statistical Manual of Mental Disorders have been raised, contributing to ongoing revisions. Ethical and intentional design approaches have been proposed for multi-perspective KOS in efforts to mitigate bias and other harmful practices. === Obsolescence === The possible obsolescence of the thesaurus and other simpler KOS has been the topic of debate, especially in the face of increasingly complex ontologies, the growing usage of "Google-like retrieval systems", and the move of KO theory and research away from LIS and toward computer science. Supporters of thesauri argue its continued usefulness for metadata enrichment, vocabulary mapping, and web services, as well as its usage in specific domains such as corporate intranets and digital image libraries.

    Read more →
  • Digital video effect

    Digital video effect

    Digital video effects (DVEs) are visual effects that provide comprehensive live video image manipulation, in the same form as optical printer effects in film. DVEs differ from standard video switcher effects (often referred to as analog effects) such as wipes or dissolves, in that they deal primarily with resizing, distortion or movement of the image. Modern video switchers often contain internal DVE functionality. Modern DVE devices are incorporated in high-end broadcast video switchers. Early examples of DVE devices found in the broadcast post-production industry include the Ampex Digital Optics (ADO), Quantel DPE-5000, Vital Squeezoom, NEC E-Flex and the Abekas A5x series of DVEs. By 1988, Grass Valley Group caught up with the competition with their Kaleidoscope, which integrated ADO-type effects with their widely used line of broadcast switching gear. DVEs are used by the broadcast television industry in live television production environments like television studios and outside broadcasts. They are commonly used in video post-production.

    Read more →
  • Enterprise information system

    Enterprise information system

    An Enterprise Information System (EIS) is any kind of information system which improves the functions of enterprise business processes through integration. This means typically offering high quality service, dealing with large volumes of data and capable of supporting some large and possibly complex organization or enterprise. An EIS must be able to be used by all parts and all levels of an enterprise. The word enterprise can have various connotations. Frequently the term is used only to refer to very large organizations such as multi-national companies or public-sector organizations. However, the term may be used to mean virtually anything, by virtue of it having become a corporate-speak buzzword. == Purpose == Enterprise information systems provide a technology platform that enables organizations to integrate and coordinate their business processes on a robust foundation. An EIS is currently used in conjunction with customer relationship management and supply chain management to automate business processes. An enterprise information system provides a single system that is central to the organization that ensuring information can be shared across all functional levels and management hierarchies. An EIS can be used to increase business productivity and reduce service cycles, product development cycles and marketing life cycles. It may be used to amalgamate existing applications. Other outcomes include higher operational efficiency and cost savings. Financial value is not usually a direct outcome from the implementation of an enterprise information system. == Design stage == At the design stage the main characteristic of EIS efficiency evaluation is the probability of timely delivery of various messages such as command, service, etc. == Information systems == Enterprise systems create a standard data structure and are invaluable in eliminating the problem of information fragmentation caused by multiple information systems within an organization. An EIS differentiates itself from legacy systems in that it is self-transactional, self-helping and adaptable to general and specialist conditions. Unlike an enterprise information system, legacy systems are limited to department-wide communications. A typical enterprise information system would be housed in one or more data centers, would run enterprise software, and could include applications that typically cross organizational borders such as content management systems.

    Read more →
  • Document

    Document

    A document is a written, drawn, presented, or memorialized representation of thought, often the manifestation of non-fictional, as well as fictional, content. The etymology of the word "document" derives from the Latin documentum, which denotes a "teaching" or "lesson": the verb doceō denotes "to teach". Historically, the term "document" was usually used to indicate written proof useful as evidence of a truth or fact. In the Computer Age, the term "document" typically refers to a primarily textual computer file, encompassing its structural and format elements, such as fonts, colors, and images. In the contemporary era, the definition of "document" has expanded beyond its traditional medium, such as paper, to encompass electronic documents as well. History, events, examples, opinions, stories, and creativity can all be expressed in documents. "Documentation" is distinct because it has more denotations than "document". Documents are also distinguished from "realia", which are three-dimensional objects that would otherwise satisfy the definition of "document" because they memorialize or represent thought. Documents are usually considered to be two-dimensional representations. == Abstract definitions == The concept of "document" has been defined by Suzanne Briet as "any concrete or symbolic indication, preserved or recorded, for reconstructing or for proving a phenomenon, whether physical or mental." An often-cited article concludes that "the evolving notion of document" among Jonathan Priest, Paul Otlet, Briet, Walter Schürmeyer, and the other documentalists increasingly emphasized whatever functioned as a document rather than traditional physical forms of documents. The shift to digital technology would seem to make this distinction even more important. David M. Levy has said that an emphasis on the technology of digital documents has impeded our understanding of digital documents as documents. A conventional document, such as a mail message or a technical report, exists physically in digital technology as a string of bits, as does everything else in a digital environment. As an object of study, it has been made into a document. It has become physical evidence by those who study it. "Document" is defined in library and information science and documentation science as a fundamental, abstract idea: the word denotes everything that may be represented or memorialized to serve as evidence. The classic example provided by Briet is an antelope: "An antelope running wild on the plains of Africa should not be considered a document[;] she rules. But if it were to be captured, taken to a zoo and made an object of study, it has been made into a document. It has become physical evidence being used by those who study it. Indeed, scholarly articles written about the antelope are secondary documents, since the antelope itself is the primary document." This opinion has been interpreted as an early expression of actor–network theory. == Kinds == A document can be structured, like tabular documents, lists, forms, or scientific charts, semi-structured like a book or a newspaper article, or unstructured like a handwritten note. Documents are sometimes classified as secret, private, or public. They may also be described as drafts or proofs. When a document is copied, the source is denominated the "original". Documents are used in numerous fields, e.g.: Academia: manuscript, thesis, paper, journal, chart, and technical drawing Media: mock-up, script, image, photography, and newspaper article Administration, law, and politics: application, brief, certificate, commission, constitutional document, form, gazette, identity document, license, manifesto, summons, census, and white paper Business: invoice, request for proposal, proposal, contract, packing slip, manifest, report (detailed and summary), spreadsheet, material safety data sheet, waybill, bill of lading, financial statement, nondisclosure agreement (NDA), mutual nondisclosure agreement, and user guide Geography and planning: topographic map, cadastre, legend, and architectural plan Such standard documents can be drafted based on a template. == Drafting == The page layout of a document is how information is graphically arranged in the space of the document, e.g., on a page. If the appearance of the document is of concern, the page layout is generally the responsibility of a graphic designer. Typography concerns the design of letter and symbol forms and their physical arrangement in the document (see typesetting). Information design concerns the effective communication of information, especially in industrial documents and public signs. Simple textual documents may not require visual design and may be drafted only by an author, clerk, or transcriber. Forms may require a visual design for their initial fields, but not to complete the forms. == Media == Traditionally, the medium of a document was paper and the information was applied to it in ink, either by handwriting (to make a manuscript) or by a mechanical process (e.g., a printing press or laser printer). Today, some short documents also may consist of sheets of paper stapled together. Historically, documents were inscribed with ink on papyrus (starting in ancient Egypt) or parchment; scratched as runes or carved on stone using a sharp tool, e.g., the Tablets of Stone described in the Bible; stamped or incised in clay and then baked to make clay tablets, e.g., in the Sumerian and other Mesopotamian civilizations. The papyrus or parchment was often rolled into a scroll or cut into sheets and bound into a codex (book). Contemporary electronic means of memorializing and displaying documents include: Monitor of a desktop computer, laptop, tablet; optionally with a printer to produce a hard copy; Personal digital assistant; Dedicated e-book device; Electronic paper, typically, using the Portable Document Format (PDF); Information appliance; Digital audio player; and Radio and television service provider. Digital documents usually require a specific file format to be presentable in a specific medium. == In law == Documents in all forms frequently serve as material evidence in criminal and civil proceedings. The forensic analysis of such a document is within the scope of questioned document examination. To catalog and manage the large number of documents that may be produced during litigation, Bates numbering is often applied to all documents in the lawsuit so that each document has a unique, arbitrary, identification number.

    Read more →
  • Materials informatics

    Materials informatics

    Materials informatics is a field of study that applies the principles of informatics and data science to materials science and engineering to improve the understanding, use, selection, development, and discovery of materials. The term "materials informatics" is frequently used interchangeably with "data science", "machine learning", and "artificial intelligence" by the community. This is an emerging field, with a goal to achieve high-speed and robust acquisition, management, analysis, and dissemination of diverse materials data with the goal of greatly reducing the time and risk required to develop, produce, and deploy new materials, which generally takes longer than 20 years. This field of endeavor is not limited to some traditional understandings of the relationship between materials and information. Some more narrow interpretations include combinatorial chemistry, process modeling, materials databases, materials data management, and product life cycle management. Materials informatics is at the convergence of these concepts, but also transcends them and has the potential to achieve greater insights and deeper understanding by applying lessons learned from data gathered on one type of material to others. By gathering appropriate meta data, the value of each individual data point can be greatly expanded. == Databases == Databases are essential for any informatics research and applications. In material informatics many databases exist containing both empirical data obtained experimentally, and theoretical data obtained computationally. Big data that can be used for machine learning is particularly difficult to obtain for experimental data due to the lack of a standard for reporting data and the variability in the experimental environment. This lack of big data has led to growing effort in developing machine learning techniques that utilize data extremely data sets. On the other hand, large uniform database of theoretical density functional theory (DFT) calculations exists. These databases have proven their utility in high-throughput material screening and discovery. Some common DFT databases and high throughput tools are listed below: Databases: MaterialsProject.org, MaterialsWeb.org (University of Florida) HT software: Pymatgen, MPInterfaces, Matminer == Beyond computational methods? == The concept of materials informatics is addressed by the Materials Research Society. For example, materials informatics was the theme of the December 2006 issue of the MRS Bulletin. The issue was guest-edited by John Rodgers of Innovative Materials, Inc., and David Cebon of Cambridge University, who described the "high payoff for developing methodologies that will accelerate the insertion of materials, thereby saving millions of investment dollars." The editors focused on the limited definition of materials informatics as primarily focused on computational methods to process and interpret data. They stated that "specialized informatics tools for data capture, management, analysis, and dissemination" and "advances in computing power, coupled with computational modeling and simulation and materials properties databases" will enable such accelerated insertion of materials. A broader definition of materials informatics goes beyond the use of computational methods to carry out the same experimentation, viewing materials informatics as a framework in which a measurement or computation is one step in an information-based learning process that uses the power of a collective to achieve greater efficiency in exploration. When properly organized, this framework crosses materials boundaries to uncover fundamental knowledge of the basis of physical, mechanical, and engineering properties. == Challenges == While there are many who believe in the future of informatics in the materials development and scaling process, many challenges remain. Hill, et al., write that "Today, the materials community faces serious challenges to bringing about this data-accelerated research paradigm, including diversity of research areas within materials, lack of data standards, and missing incentives for sharing, among others. Nonetheless, the landscape is rapidly changing in ways that should benefit the entire materials research enterprise." This remaining tension between traditional materials development methodologies and the use of more computationally, machine learning, and analytics approaches will likely exist for some time as the materials industry overcomes some of the cultural barriers necessary to fully embrace such new ways of thinking. == Analogy from Biology == The overarching goals of bioinformatics and systems biology may provide a useful analogy. Andrew Murray of Harvard University expresses the hope that such an approach "will save us from the era of "one graduate student, one gene, one PhD". Similarly, the goal of materials informatics is to save us from one graduate student, one alloy, one PhD. Such goals will require more sophisticated strategies and research paradigms than applying data-science methods to the same tasks set currently undertaken by students.

    Read more →
  • Percept (artificial intelligence)

    Percept (artificial intelligence)

    A percept is the input that an intelligent agent is perceiving at any given moment. It is essentially the same concept as a percept in psychology, except that it is being perceived not by the brain but by the agent. A percept is detected by a sensor, often a camera, processed accordingly, and acted upon by an actuator. Each percept is added to a "percept sequence", which is a complete history of each percept ever detected. The agent's action at any instant point may depend on the entire percept sequence up to that particular instant point. An intelligent agent chooses how to act not only based on the current percept, but the percept sequence. The next action is chosen by the agent function, which maps every percept to an action. For example, if a camera were to record a gesture, the agent would process the percepts, calculate the corresponding spatial vectors, examine its percept history, and use the agent program (the application of the agent function) to act accordingly. == Examples == Examples of percepts include inputs from touch sensors, cameras, infrared sensors, sonar, microphones, mice, and keyboards. A percept can also be a higher-level feature of the data, such as lines, depth, objects, faces, or gestures.

    Read more →
  • Algorism

    Algorism

    Algorism is the technique of performing basic arithmetic by writing numbers in place value form and applying a set of memorized rules and facts to the digits. One who practices algorism is known as an algorist. This positional notation system has largely superseded earlier calculation systems that used a different set of symbols for each numerical magnitude, such as Roman numerals, and in some cases required a device such as an abacus. == Etymology == The word algorism comes from the name Al-Khwārizmī (c. 780–850), a Persian mathematician, astronomer, geographer and scholar in the House of Wisdom in Baghdad, whose name means "the native of Khwarezm", which is now in modern-day Uzbekistan. He wrote a treatise in Arabic language in the 9th century, which was translated into Latin in the 12th century under the title Algoritmi de numero Indorum. This title means "Algoritmi on the numbers of the Indians", where "Algoritmi" was the translator's Latinization of Al-Khwarizmi's name. Al-Khwarizmi was the most widely read mathematician in Europe in the late Middle Ages, primarily through his other book, the Algebra. In late medieval Latin, algorismus, the corruption of his name, simply meant the "decimal number system" that is still the meaning of modern English algorism. During the 17th century, the French form for the word – but not its meaning – was changed to algorithm, following the model of the word logarithm, this form alluding to the ancient Greek arithmos = number. English adopted the French very soon afterwards, but it wasn't until the late 19th century that "algorithm" took on the meaning that it has in modern English. In English, it was first used about 1230 and then by Chaucer in 1391. Another early use of the word is from 1240, in a manual titled Carmen de Algorismo composed by Alexandre de Villedieu. It begins thus: Haec algorismus ars praesens dicitur, in qua / Talibus Indorum fruimur bis quinque figuris. which translates as: This present art, in which we use those twice five Indian figures, is called algorismus. The word algorithm also derives from algorism, a generalization of the meaning to any set of rules specifying a computational procedure. Occasionally algorism is also used in this generalized meaning, especially in older texts. == History == Starting with the integer arithmetic developed in India using base 10 notation, Al-Khwārizmī along with other mathematicians in medieval Islam, documented new arithmetic methods and made many other contributions to decimal arithmetic (see the articles linked below). These included the concept of the decimal fractions as an extension of the notation, which in turn led to the notion of the decimal point. This system was popularized in Europe by Leonardo of Pisa, now known as Fibonacci.

    Read more →
  • Single source of truth

    Single source of truth

    In information science and information technology, single source of truth (SSOT) architecture, or single point of truth (SPOT) architecture, for information systems is the practice of structuring information models and associated data schemas such that every data element is mastered (or edited) in only one place, providing data normalization to a canonical form (for example, in database normalization or content transclusion). There are several scenarios with respect to copies and updates: The master data is never copied and instead only references to it are made; this means that all reads and updates go directly to the SSOT. The master data is copied but the copies are only read and only the master data is updated; if requests to read data are only made on copies, this is an instance of CQRS. The master data is copied and the copies are updated; this needs a reconciliation mechanism when there are concurrent updates. Updates on copies can be thrown out whenever a concurrent update is made on the master, so they are not considered fully committed until propagated to the master. (many blockchains work that way.) Concurrent updates are merged. (if an automatic merge fails, it could fall back on another strategy, which could be the previous strategy or something else like manual intervention, which most source version control systems do.) The advantages of SSOT architectures include easier prevention of mistaken inconsistencies (such as a duplicate value/copy somewhere being forgotten), and greatly simplified version control. Without a SSOT, dealing with inconsistencies implies either complex and error-prone consensus algorithms, or using a simpler architecture that's liable to lose data in the face of inconsistency (the latter may seem unacceptable but it is sometimes a very good choice; it is how most blockchains operate: a transaction is actually final only if it was included in the next block that is mined). Ideally, SSOT systems provide data that are authentic (and authenticatable), relevant, and referable. Deployment of an SSOT architecture is becoming increasingly important in enterprise settings where incorrectly linked duplicate or de-normalized data elements (a direct consequence of intentional or unintentional denormalization of any explicit data model) pose a risk for retrieval of outdated, and therefore incorrect, information. Common examples (i.e., example classes of implementation) are as follows: In electronic health records (EHRs), it is imperative to accurately validate patient identity against a single referential repository, which serves as the SSOT. Duplicate representations of data within the enterprise would be implemented by the use of pointers rather than duplicate database tables, rows, or cells. This ensures that data updates to elements in the authoritative location are comprehensively distributed to all federated database constituencies in the larger overall enterprise architecture. EHRs are an excellent class for exemplifying how SSOT architecture is both poignantly necessary and challenging to achieve: it is challenging because inter-organization health information exchange is inherently a cybersecurity competence hurdle, and nonetheless it is necessary, to prevent medical errors, to prevent the wasted costs of inefficiency (such as duplicated work or rework), and to make the primary care and medical home concepts feasible (to achieve competent care transitions). Single-source publishing as a general principle or ideal in content management relies on having SSOTs, via transclusion or (otherwise, at least) substitution. Substitution happens via libraries of objects that can be propagated as static copies which are later refreshed when necessary (that is, when refreshing of the copy-paste or import is triggered by a larger updating event). Component content management systems are a class of content management systems that aim to provide competence on this level. == Implementation == === Ontologic interactions === An acknowledged prerequisite (of the notion that any given single source of truth can exist) is that it depends on the ontologic condition that no more than a single truth (about any particular fact or idea) exists, an assertion that is ontologic in both the IT sense and the general sense of that word. In many instances, this presents no problem (for example, within particular namespaces, or even across them, as long as naming collisions or broader name conflicts are adequately handled). The broadest contexts (and thus thorniest, regarding ontologic discrepancies) require adequate epistemic regime comparison and reconciliation (or at least negotiation or transactional exchanges). An archetypal example of this class of reconciliation is that two theological seminary libraries, from two different religions (X and Y), could exchange information with an SSOT architecture, but the unification of truth would reside on the level of the statement that "religion X asserts that God is purple whereas religion Y asserts that God is green", rather than on the level of "God is purple" or "God is green". === Architectures or architectural features === An ideal implementation of SSOT is rarely possible in most enterprises. This is because many organisations have multiple information systems, each of which needs access to data relating to the same entities (e.g., customer). Often these systems are purchased as commercial off-the-shelf products from vendors and cannot be modified in trivial ways. Each of these various systems therefore needs to store its own version of common data or entities, and therefore each system must retain its own copy of a record (hence immediately violating the SSOT approach defined above). For example, an enterprise resource planning (ERP) system (such as SAP or Oracle e-Business Suite) may store a customer record; the customer relationship management (CRM) system also needs a copy of the customer record (or part of it) and the warehouse dispatch system might also need a copy of some or all of the customer data (e.g., shipping address). In cases where vendors do not support such modifications, it is not always possible to replace these records with pointers to the SSOT. For organisations (with more than one information system) wishing to implement a Single Source of Truth (without modifying all but one master system to store pointers to other systems for all entities), some supporting architectures are: Master data management (MDM) Event store and event sourcing (ES) ==== Master data management (MDM) ==== A master data management system typically serves as the source of truth for an organization's metadata, helping to ensure accuracy and consistency throughout that organizations multiple data sources. Typically the MDM acts as a hub for multiple systems, many of which could allow (be the source of truth for) updates to different aspects of information on a given entity. For example, the CRM system may be the "source of truth" for most aspects of the customer, and is updated by a call centre operator. However, a customer may (for example) also update their address via a customer service web site, with a different back-end database from the CRM system. The MDM application receives updates from multiple sources, acts as a broker to determine which updates are to be regarded as authoritative (the golden record) and then syndicates this updated data to all subscribing systems. The MDM application normally requires an ESB to syndicate its data to multiple subscribing systems. ==== Event store and event sourcing (ES) ==== In event oriented architectures, it has become increasingly common to find an implementation of the Event Sourcing pattern which stores the system state as an ordered sequence of state changes. To do this, you need an Event Store, a particular type of database designed to hold all the events that change the state of the system. The event store in an Event Sourcing + Command Query Responsibility Separation + Domain Driven Design + Messaging architecture is in fact a "single source of truth", with the additional advantage that it can also act as an Enterprise Service Bus as it can listen directly to the event store for status changes as everything passes by. In addition, by saving all the events, it also plays the role of Data Warehouse. One last advantage is that through this system the Shared Database pattern can be implemented, another technique not mentioned to obtain a single source of truth. ==== Data warehouse (DW) ==== While the primary purpose of a data warehouse is to support reporting and analysis of data that has been combined from multiple sources, the fact that such data has been combined (according to business logic embedded in the data transformation and integration processes) means that the data warehouse is often used as a de facto SSOT. Generally, however, the data available from the data warehouse are not used to update other systems; rather the DW becomes

    Read more →