Best AI Photo Editor

Best AI Photo Editor — hands-on reviews, top picks, pricing, pros and cons and a practical how-to guide on Aizhi.

  • Jaggies

    Jaggies

    Jaggies are visual artifacts in raster images, most frequently from aliasing, which in turn is often caused by non-linear mixing effects producing high-frequency components, or missing or poor anti-aliasing filtering prior to sampling. Jaggies are stair-like lines that appear where there should be "smooth" straight lines or curves. For example, when a nominally straight, un-aliased line steps across one pixel either horizontally or vertically, a "dogleg" occurs halfway through the line, where it crosses the threshold from one pixel to the other. Jaggies should not be confused with most compression artifacts, which are a different phenomenon. == Causes == Jaggies occur due to the "staircase effect". This is because a line represented in raster mode is approximated by a sequence of pixels. Jaggies can occur for a variety of reasons, the most common being that the output device (display monitor or printer) does not have sufficient resolution to portray a smooth line. In addition, jaggies often occur when a bit-mapped image is scaled to a higher resolution. This is one of the advantages that vector graphics have over bitmapped graphics – a vector image can be losslessly scaled to any arbitrary resolution or stretched infinitely in either axis without introducing jaggies. == Solutions == The effect of jaggies can be reduced by a graphics technique known as spatial anti-aliasing. Anti-aliasing smooths out jagged lines by surrounding them with transparent pixels to simulate the appearance of fractionally-filled pixels when viewed at a distance. The downside of anti-aliasing is that it reduces contrast – rather than sharp black/white transitions, there are shades of gray – and the resulting image can appear fuzzy. This is an inescapable trade-off: if the resolution is insufficient to display the desired detail, the output will either be jagged, fuzzy, or some combination thereof. While machine learning-based upscaling techniques such as DLSS can be used to infer this missing information, other types of artifacts may be introduced in the process. In real-time 3D rendering such as in video games, various anti-aliasing techniques are used to remove jaggies created by the edges of polygons and other contrasting lines. Since anti-aliasing can impose a significant performance overhead, games for home computers often allow users to choose the level and type of anti-aliasing in use in order to optimize their experience, whereas on consoles this setting is typically fixed for each title to ensure a consistent experience. While anti-aliasing is generally implemented through graphics APIs like DirectX and Vulkan, some consoles such as the Xbox 360 and PlayStation 3 are also capable of anti-aliasing to little direct performance cost by way of dedicated hardware which performs anti-aliasing on the contents of the framebuffer once it has been rendered by the GPU. Jaggies in bitmaps, such as sprites and surface materials, are most often dealt with by separate texture filtering routines, which are far easier to perform than anti-aliasing filtering. Texture filtering became ubiquitous on PCs after the introduction of 3Dfx's Voodoo GPU. == Notable uses of the term == In the 1985 game Rescue on Fractalus! for the Atari 8-bit computers, the graphics depicting the cockpit of the player's spacecraft contains two window struts, which are not anti-aliased and are therefore very "jagged". The developers made fun of this and named the in-game enemies "Jaggi", and also initially titled the game Behind Jaggi Lines!. The latter idea was scrapped by the marketing department before release.

    Read more →
  • Crackme

    Crackme

    A crackme is a small computer program designed to test a programmer's reverse engineering skills. Crackmes are made as a legal way to crack software, since no intellectual property is being infringed. == Description == Crackmes often incorporate protection schemes and algorithms similar to those used in proprietary software. However, they can sometimes be more challenging because they may use advanced packing or protection techniques, making the underlying algorithm harder to analyze and modify. == Keygenme == A keygenme is specifically designed for the reverser to not only identify the protection algorithm used in the application but also create a small key generator (keygen) in the programming language of their choice. Most keygenmes, when properly manipulated, can be made self-keygenning. For example, during validation, they might generate the correct key internally and compare it to the user's input. This allows the key generation algorithm to be easily replicated. Anti-debugging and anti-disassembly routines are often used to confuse debuggers or render disassembly output useless. Code obfuscation is also used to further complicate reverse engineering.

    Read more →
  • VK Video

    VK Video

    VK Video is an internet video hosting service launched by VK (formerly known as Mail.ru Group) in 2021. It is positioned as a Russian alternative to the international platform YouTube. == History == The "VK Video" service began operations on October 15, 2021, following the merger of video platforms belonging to the social networks "VKontakte" and "Odnoklassniki". The launch of "VK Video" was managed by a team of executives led by VKontakte CEO Marina Krasnova, who worked at the company until 2023. Its launch was intended as an alternative to the international platform YouTube, which Russian authorities sought to replace with "domestic analogs. Key differences of the Russian service became the presence of pirated materials. Videos from the American video hosting site were uploaded en masse to "VK Video," which even caused the service to be temporarily blocked by YouTube. From 2022, to attract users, VKontakte's management bet on working with famous bloggers, specifically purchasing the shows "What Happened Next?" (ChBD) and "Vnutri Lapenko". Among the bloggers recruited to promote the service was the popular video blogger Vlad A4. An additional advantage for creators was the availability of monetization, which had been unavailable on YouTube for users from the Russian Federation since 2022. In September 2023, a separate "VK Video" mobile app appeared. In total, by the end of 2023, the monthly audience of "VK Video" reached 67.9 million users (which is almost 30 million less than YouTube). In the summer of 2024, following the blocking of YouTube in Russia, the service's traffic grew sharply: in August, its audience increased by more than two times compared to July. In the same month, "VK Video" took second place in downloads among free apps in the App Store and third in Google Play. In December 2024, the service received its own domain: vkvideo.ru. For the first time, "VK Video" managed to surpass YouTube in monthly audience in Russia in July 2025: the Russian service attracted 76.4 million viewers, whereas YouTube's reach amounted to 74.9 million people. == Platform features == On "VK Video," a view is recorded from the first second, whereas on YouTube it is only from the thirtieth. At the same time, a significant portion of comments are left by bots. For videos from the platform's most popular bloggers, the engagement level (likes to views) does not reach 4%. The "Trends" section most often features videos from large channels where the ratio of likes to views does not exceed 2%. == Management == In April 2025, the post of General Director of "VK Video" was taken by Marianna Maksimovskaya. From June 2022 to July 2024, the development of the platform was led by Fyodor Yezhov, who was primarily responsible for its technical direction. == Awards == In 2023, VK Video was awarded the Runet Prize in the "Science, Technology and Innovation" category.

    Read more →
  • Roposo

    Roposo

    Roposo is an Indian video-sharing social media service, owned by Glance, a subsidiary of InMobi. Roposo provides a space where users can share posts related to different topics like food, comedy, music, poetry, fashion and travel. It is a platform where people express visually with homemade videos and photos. The app offers a TV-like browsing experience with user-generated content on its channels. Users can also use editing tools on the platform and upload their content. == History == Established in July 2014 under Relevant E-solutions Pvt. Ltd., Roposo is the brainchild of three IIT Delhi alumni – Mayank Bhangadia, Avinash Saxena, and Kaushal Shubhank. Under Bhangadia's leadership, the company pivoted from a fashion-based network into a short-form video platform with AI-powered moderation, and its journey was featured as a Harvard Business Publishing case study. In November 2019, Roposo was acquired by InMobi's Glance Digital Experience Pvt. Ltd.(the mobile content platform and part of the InMobi Group). When the Chinese-owned video-sharing app TikTok was banned on 30 June 2020, the app saw a huge spike in users with several TikTok users registering on Roposo. == Technology == The open platform has some features such as a TV-like browsing, different channels, a chat feature that lets buyers and sellers converse directly through the platform, and creation tools such as an option to add voice-over, music and GIF stickers for videos and photos.

    Read more →
  • RCUDA

    RCUDA

    rCUDA, which stands for Remote CUDA, is a type of middleware software framework for remote GPU virtualization. Fully compatible with the CUDA application programming interface (API), it allows the allocation of one or more CUDA-enabled GPUs to a single application. Each GPU can be part of a cluster or running inside of a virtual machine. The approach is aimed at improving performance in GPU clusters that are lacking full utilization. GPU virtualization reduces the number of GPUs needed in a cluster, and in turn, leads to a lower cost configuration – less energy, acquisition, and maintenance. The recommended distributed acceleration architecture is a high performance computing cluster with GPUs attached to only a few of the cluster nodes. When a node without a local GPU executes an application needing GPU resources, remote execution of the kernel is supported by data and code transfers between local system memory and remote GPU memory. rCUDA is designed to accommodate this client-server architecture. On one end, clients employ a library of wrappers to the high-level CUDA Runtime API, and on the other end, there is a network listening service that receives requests on a TCP port. Several nodes running different GPU-accelerated applications can concurrently make use of the whole set of accelerators installed in the cluster. The client forwards the request to one of the servers, which accesses the GPU installed in that computer and executes the request in it. Time-multiplexing the GPU, or in other words sharing it, is accomplished by spawning different server processes for each remote GPU execution request. == rCUDA v20.07 == The rCUDA middleware enables the concurrent usage of CUDA-compatible devices remotely. rCUDA employs either the InfiniBand network or the socket API for the communication between clients and servers. rCUDA can be useful in three different environments: Clusters. To reduce the number of GPUs installed in High Performance Clusters. This leads to energy savings, as well as other related savings like acquisition costs, maintenance, space, cooling, etc. Academia. In commodity networks, to offer access to a few high performance GPUs concurrently to many students. Virtual Machines. To enable the access to the CUDA facilities on the physical machine. The current version of rCUDA (v20.07) supports CUDA version 9.0, excluding graphics interoperability. rCUDA v20.07 targets the Linux OS (for 64-bit architectures) on both client and server sides. CUDA applications do not need any change in their source code in order to be executed with rCUDA.

    Read more →
  • Noom

    Noom

    Noom is an American privately held digital health company that provides weight management and behavioral health services through a subscription-based mobile application. Founded in 2008, the company combines behavior change psychology with access to weight loss medications and dietary supplements. The platform incorporates elements of cognitive behavioral therapy (CBT) and goal-setting strategies, and its programs are designed to support users in developing healthier habits. In addition to its weight management services, Noom has expanded to offer products related to stress management and general wellness. Noom has received both praise and criticism. Supporters cite its focus on mental and behavioral aspects of health, while critics have raised concerns about the accuracy of its calorie goals, the use of algorithmically determined weight loss targets, and questions about the qualifications of some of its coaching staff. == History == Noom was founded in 2008 by friends Artem Petakov and Saeju Jeong. The company's mobile app officially launched in 2016. In 2025, Noom relocated its headquarters from New York City to Princeton, New Jersey. Petakov, a former software engineer at Google, currently leads Noom Ventures, while Jeong serves as Noom's Chairman. In 2023, Geoff Cook was appointed CEO of Noom. In 2019, Noom partnered with Novo Nordisk to offer patients prescribed the diabetes medication Saxenda one year of free access to the Noom platform. In 2020, Noom reported $400 million in revenue. As of April 2021, the company stated it employed approximately 3,000 people, including 2,700 coaches. == Services == === Noom App === The Noom app is the primary platform through which users engage with the company's services. Upon creating an account, users are prompted to provide physical information such as weight, height, and age, along with experiential data including lifestyle habits, personal goals, and perceived obstacles. Users log their meals and physical activity, and in return, the app delivers feedback through multiple channels: algorithmically generated insights, guidance from a human coach, peer interaction, educational articles, and interactive quizzes. The app has been reviewed by a range of media outlets, including newspapers such as the Chicago Tribune and USA Today; health information sources such as WebMD; and lifestyle magazines including Good Housekeeping. === Other services === In 2024, Noom launched Noom Vibe, a mobile application that encourages users to develop healthy habits by awarding "vibes"—a form of points—for activities such as walking or meeting step goals. That same year, Noom introduced a 3D body scanning feature within its app, designed to help users monitor physical changes and prevent muscle atrophy during weight loss. Also in 2024, Noom began offering a compounded GLP-1 medication as part of its weight management program. The formulation includes the same active ingredient found in the anti-obesity medications Wegovy and Ozempic. == Research == In 2016, a study published in Scientific Reports analyzed data from approximately 36,000 users of the Noom app, of whom 78% were female and 22% male. The data were collected between October 2012 and April 2014. To be included in the analysis, users had to log their weight at least twice per month over a period of six consecutive months. The study found that 78% of participants self-reported weight loss while using the app. The median duration of weight reporting was 267 days (approximately nine months). The frequency of data logging was positively correlated with weight loss. Additionally, male users had a higher average starting BMI and reported greater average weight loss compared to female users. In 2017, the Centers for Disease Control and Prevention (CDC) recognized Noom as a certified diabetes prevention program, making it the first mobile health application to receive such designation. == Criticisms == === Health programs === Noom has been criticized for promoting elements of diet culture in its advertising campaigns. The app has also faced criticism for setting calorie goals that some users and experts have deemed inappropriately low, and for employing coaches who may lack formal qualifications as registered dietitians. Coaching has been described as relying heavily on canned responses. Upon sign-up, users are prompted to complete a questionnaire consisting of over 50 questions, which is used to generate a personalized program. In 2021, the UK-based organization Privacy International alleged that Noom, along with other diet platforms, used such lengthy surveys to attract users but did not always tailor the resulting programs to the collected data. The organization claimed that many users received the same or highly similar programs regardless of their answers. It also raised concerns about the handling of potentially sensitive health data, alleging a lack of transparency regarding the sharing of such data with third parties, including Facebook, potentially in violation of the European General Data Protection Regulation (GDPR). In a follow-up investigation in 2023, Privacy International reported that Noom had made "significant positive changes" to its data handling practices. However, the organization noted that data was still being shared with Facebook and concluded that "there is still room for improvement." === Billing issues lawsuit === In August 2020, the Better Business Bureau (BBB) issued a warning to consumers regarding Noom's subscription practices. The BBB reported that numerous customers had filed complaints about difficulties canceling their subscriptions after the free trial period, as well as challenges in contacting the company to request refunds. In February 2022, Noom agreed to a $62 million settlement in a class-action lawsuit that alleged the company had used deceptive billing practices related to automatic subscription renewals. Qualifying claimants received approximately $167 each. During the case, a former senior software engineer at Noom testified that the cancellation process was intentionally designed to be difficult, with the goal of generating revenue from customers who failed to cancel in time. In response, Noom stated that it had taken steps to improve transparency around its pricing and policies, including the implementation of self-service cancellation tools.

    Read more →
  • Gonioreflectometer

    Gonioreflectometer

    A gonioreflectometer is a device for measuring a bidirectional reflectance distribution function (BRDF). The device consists of a light source illuminating the material to be measured and a sensor that captures light reflected from that material. The light source should be able to illuminate and the sensor should be able to capture data from a hemisphere around the target. The hemispherical rotation dimensions of the sensor and light source are the four dimensions of the BRDF. The 'gonio' part of the word refers to the device's ability to measure at different angles. Several similar devices have been built and used to capture data for similar functions. Most of these devices use a camera instead of the light intensity-measuring sensor to capture a two-dimensional sample of the target. Examples include: a spatial gonioreflectometer for capturing the SBRDF (McAllister, 2002). a camera gantry for capturing the light field (Levoy and Hanrahan, 1996). an unnamed device for capturing the bidirectional texture function (Dana et al., 1999).

    Read more →
  • Frame grabber

    Frame grabber

    A frame grabber is an electronic device that captures (i.e., "grabs") individual, digital still frames from an analog video signal or a digital video stream. It is usually employed as a component of a computer vision system, in which video frames are captured in digital form and then displayed, stored, transmitted, analyzed, or combinations of these. Historically, frame grabber expansion cards were the predominant way to interface cameras to PCs. Other interface methods have emerged since then, with frame grabbers (and in some cases, cameras with built-in frame grabbers) connecting to computers via interfaces such as USB, Ethernet and IEEE 1394 ("FireWire"). Early frame grabbers typically had only enough memory to store a single digitized video frame, whereas many modern frame grabbers can store multiple frames. Modern frame grabbers often are able to perform functions beyond capturing a single video input. For example, some devices capture audio in addition to video, and some devices provide, and concurrently capture frames from multiple video inputs. Other operations may be performed as well, such as deinterlacing, text or graphics overlay, image transformations (e.g., resizing, rotation, mirroring), and conversion to JPEG or other compressed image formats. To satisfy the technological demands of applications such as radar acquisition, manufacturing and remote guidance, some frame grabbers can capture images at high frame rates, high resolutions, or both. == Circuitry == Analog frame grabbers, which accept and process analog video signals, include these circuits: Input signal conditioner that buffers the analog video input signal to protect downstream circuitry Video decoder that converts SD analog video (e.g., NTSC, SECAM, PAL) or HD analog video (e.g., AHD, HD-TVI, HD-CVI) to a digital format Digital frame grabbers, which accept and process digital video streams, include these circuits: Digital video decoder that interfaces to and converts a specific type of digital video source, such as Camera Link, CoaXPress, DVI, GigE Vision, LVDS, or SDI Circuitry common to both analog and digital frame grabbers: Memory for storing the acquired image (i.e., a frame buffer) A bus interface through which a processor can control the acquisition and access the data General purpose I/O for triggering image acquisition or controlling external equipment == Applications == === Healthcare === Frame grabbers are used in medicine for many applications, including telenursing and remote guidance. In situations where an expert at another location needs to be consulted, frame grabbers capture the image or video from the appropriate medical equipment, so it can be sent digitally to the distant expert. === Manufacturing === "Pick and place" machines are often used to mount electronic components on circuit boards during the circuit board assembly process. Such machines use one or more cameras to monitor the robotics that places the components. Each camera is paired with a frame grabber that digitizes the analog video, thus converting the video to a form that can be processed by the machine software. === Network security === Frame grabbers may be used in security applications. For example, when a potential breach of security is detected, a frame grabber captures an image or a sequence of images, and then the images are transmitted across a digital network where they are recorded and viewed by security personnel. === Personal use === In recent years with the rise of personal video recorders like camcorders, mobile phones, etc. video and photo applications have gained ascending prominence. Frame grabbing is becoming very popular on these devices. === Astronomy & astrophotography === Amateur astronomers and astrophotographers use frame grabbers when using analog "low light" cameras for live image display and internet video broadcasting of celestial objects. Frame grabbers are essential to connect the analog cameras used in this application to the computers that store or process the images.

    Read more →
  • Monitoring as a service

    Monitoring as a service

    Monitoring as a service (MaaS) is a cloud-based framework for the deployment of monitoring functionalities for various other services and applications within the cloud. The most common application for MaaS is online state monitoring, which continuously tracks certain states of applications, networks, systems, instances or any element that may be deployable within the cloud.

    Read more →
  • Visible (mobile app)

    Visible (mobile app)

    Visible is a health tracking mobile app for people with long COVID and myalgic encephalomyelitis/chronic fatigue syndrome (ME/CFS). The company was founded by a Harry Leeming, an engineer from London living with long Covid since 2020, and Luke Martin-Fuller. In November 2022, Visible released an open beta of an app that aims to help people pace their activities to avoid post-exertional malaise. The app gathers data on exertion levels, symptom severity, and heart-rate variability. HRV is approximated using a smartphone's camera via a technique called photoplethysmography, and according to the app's developers, can indicate how much someone needs rest. The app is currently free, but is expected to be freemium in the future. Users can also opt to allow their data be used for research purposes. In July 2023, Visible and Imperial College London announced the start of the first two studies. One is on the effects of the menstrual cycle on long COVID symptoms, and the other is on the condition's epidemiology and economic impact. Visible has announced plans to couple the app with activity trackers for continuous monitoring of heart-rate and actimetry data, which the developers claim will be more effective. As of 2022, no clinical trials on Visible's effectiveness have been conducted.

    Read more →
  • AirDine

    AirDine

    AirDine was a mobile app within the platform economy where individuals acted as both supplier and customer for a supper club. AirDine discontinued their service after 31 October 2017. == Operations == AirDine was an online marketplace for home dining that connected users that liked to cook with users looking for a dining experience. Users were categorized as "Hosts" and "Guests," both of whom needed to register with AirDine. AirDine acted as a two-sided market for home dining that allowed hosts and guests, and did not act as a restaurant or host any dinners itself. AirDine charged a service fee. Security and safety of the host were not vetted by AirDine and were completely left to users based on published reviews. Profiles included user reviews and shared social connections to build trust among users. AirDine also included a private messaging system.

    Read more →
  • Sports Card Investor

    Sports Card Investor

    Sports Card Investor is an American sports collectibles media platform and mobile application founded by Geoff Wilson. The platform provides market data, analysis, and editorial content focused on sports trading cards and related collectibles. It operates a website, mobile app, and digital media channels covering developments in the sports card industry. The company posted its first YouTube video in July 2019, shortly before a period of rapid growth in sports card collecting in the early 2020s, which was marked by increased trading volumes and mainstream media attention. == History == Sports Card Investor was founded by Geoff Wilson, an entrepreneur and collector who began publishing sports card–related content online before launching the platform's dedicated app and subscription tools. In February 2020, the company launched Market Movers, the first website and app to chart sports card prices and track card collections. The platform expanded its media presence through partnerships and distribution agreements. In 2023, Yahoo Sports announced a new collectibles coverage initiative that included additional content from Sports Card Investor. In February 2024, the Sports Card Investor studio relocated to CardsHQ in Atlanta, Georgia, and visitors to the facility can watch Sports Card Investor videos being filmed. == Platform and content == The Sports Card Investor app provides users with pricing data, portfolio-tracking tools, and market-trend analysis for trading cards. The company also produces video and editorial content discussing market developments, grading trends, and major card releases. Coverage in industry publications has referenced Sports Card Investor in discussions about shifts in sports card licensing rights and hobby market reactions. == Industry context == The growth of Sports Card Investor coincided with a broader resurgence in trading card markets, including record sales and expanded retail presence. Mainstream outlets have cited the company and its founder in reporting on collectibles investing trends, grading practices, and market volatility. The Sports Card Investor app has attracted over 37,000 reviews on the Apple App Store, reflecting its strong user engagement within the sports card community.

    Read more →
  • Journal of Machine Learning Research

    Journal of Machine Learning Research

    The Journal of Machine Learning Research is a peer-reviewed open access scientific journal covering machine learning. It was established in 2000 and the first editor-in-chief was Leslie Kaelbling. The current editors-in-chief are Francis Bach (Inria) and David Blei (Columbia University). == History == The journal was established as an open-access alternative to the journal Machine Learning. In 2001, forty editorial board members of Machine Learning resigned, saying that in the era of the Internet, it was detrimental for researchers to continue publishing their papers in expensive journals with pay-access archives. The open access model employed by the Journal of Machine Learning Research allows authors to publish articles for free and retain copyright, while archives are freely available online. Print editions of the journal were published by MIT Press until 2004 and by Microtome Publishing thereafter. From its inception, the journal received no revenue from the print edition and paid no subvention to MIT Press or Microtome Publishing. In response to the prohibitive costs of arranging workshop and conference proceedings publication with traditional academic publishing companies, the journal launched a proceedings publication arm in 2007 and now publishes proceedings for several leading machine learning conferences, including the International Conference on Machine Learning, COLT, AISTATS, and workshops held at the Conference on Neural Information Processing Systems.

    Read more →
  • Videotex

    Videotex

    Videotex (or interactive videotex) was one of the earliest implementations of an end-user information system. From the late 1970s to early 2010s, it was used to deliver information (usually pages of text) to a user in computer-like format, typically to be displayed on a television or a dumb terminal. In a strict definition, videotex is any system that provides interactive content and displays it on a video monitor such as a television, typically using modems to send data in both directions. A close relative is teletext, which sends data in one direction only, typically encoded in a television signal. All such systems are occasionally referred to as viewdata. Unlike the modern Internet, traditional videotex services were highly centralized. Videotex in its broader definition can be used to refer to any such service, including teletext, the Internet, bulletin board systems, online service providers, and even the arrival/departure displays at an airport. This usage is no longer common. With the exception of Minitel in France, videotex elsewhere never managed to attract any more than a very small percentage of the universal mass market once envisaged. By the end of the 1980s its use was essentially limited to a few niche applications. == Initial development and technologies == === United Kingdom === The first attempts at a general-purpose videotex service were created in the United Kingdom in the late 1960s. In about 1970 the BBC had a brainstorming session in which it was decided to start researching ways to send closed captioning information to the audience. As the Teledata research continued the BBC became interested in using the system for delivering any sort of information, not just closed captioning. In 1972, the concept was first made public under the new name Ceefax. Meanwhile, the General Post Office (soon to become British Telecom) had been researching a similar concept since the late 1960s, known as Viewdata. Unlike Ceefax which was a one-way service carried in the existing TV signal, Viewdata was a two-way system using telephones. Since the Post Office owned the telephones, this was considered to be an excellent way to drive more customers to use the phones. Not to be outdone by the BBC, they also announced their service, under the name Prestel. ITV soon joined the fray with a Ceefax-clone known as ORACLE. In 1974, all the services agreed on a standard for displaying the information. The display would be a simple 40×24 grid of text, with some "graphics characters" for constructing simple graphics, revised and finalized in 1976. The standard did not define the delivery system, so both Viewdata-like and Teledata-like services could at least share the TV-side hardware, which was expensive at the time. The standard also introduced a new term that covered all such services, teletext. Ceefax first started operation in 1974 with a limited 30 pages, followed quickly by ORACLE and then Prestel in 1979. By 1981, Prestel International was available in nine countries, and a number of countries, including Sweden, The Netherlands, Finland and West Germany were developing their own national systems closely based on Prestel. General Telephone and Electronics (GTE) acquired an exclusive agency for the system for North America. In the early 1980s, videotex became the base technology for the London Stock Exchange's pricing service called TOPIC. Later versions of TOPIC, notably TOPIC2 and TOPIC3, were developed by Thanos Vassilakis and introduced trading and historic price feeds. === France === Development of a French teletext-like system began in 1973. A very simple 2-way videotex system called Tictac was also demonstrated in the mid-1970s. As in the UK, this led on to work to develop a common display standard for videotex and teletext, called Antiope, which was finalised in 1977. Antiope had similar capabilities to the UK system for displaying alphanumeric text and chunky "mosaic" character-based block graphics. A difference however was that while in the UK standard control codes automatically also occupied one character position on screen, Antiope allowed for "non spacing" control codes. This gave Antiope slightly more flexibility in the use of colours in mosaic block graphics, and in presenting the accents and diacritics of the French language. Meanwhile, spurred on by the 1978 Nora/Minc report, the French government was determined to catch up on a perceived falling behind in its computer and communications facilities. In 1980 it began field trials issuing Antiope-based terminals for free to over 250,000 telephone subscribers in Ille-et-Vilaine region, where the French CCETT research centre was based, for use as telephone directories. The trial was a success, and in 1982 Minitel was rolled out nationwide. === Canada === Since 1970, researchers at the Communications Research Centre (CRC) in Ottawa had been working on a set of "picture description instructions", which encoded graphics commands as a text stream. Graphics were encoded as a series of instructions (graphics primitives) each represented by a single ASCII character. Graphic coordinates were encoded in multiple 6 bit strings of XY coordinate data, flagged to place them in the printable ASCII range so that they could be transmitted with conventional text transmission techniques. ASCII SI/SO characters were used to differentiate the text from graphic portions of a transmitted "page". In 1975, the CRC gave a contract to Norpak to develop an interactive graphics terminal that could decode the instructions and display them on a colour display, which was successfully up and running by 1977. Against the background of the developments in Europe, CRC was able to persuade the Canadian government to develop the system into a fully-fledged service. In August 1978, the Canadian Department of Communications publicly launched it as Telidon, a "second generation" videotex/teletext service, and committed to a four-year development plan to encourage rollout. Compared to the European systems, Telidon offered real graphics, as opposed to block-mosaic character graphics. The downside was that it required much more advanced decoders, typically featuring Zilog Z80 or Motorola 6809 processors. === Japan === Research in Japan was shaped by the demands of the large number of Kanji characters used in Japanese script. With 1970s technology, the ability to generate so many characters on demand in the end-user's terminal was seen as prohibitive. Instead, development focussed on methods to send pages to user terminals pre-rendered, using coding strategies similar to facsimile machines. This led to a videotex system called Captain ("Character and Pattern Telephone Access Information Network"), created by NTT in 1978, which went into full trials from 1979 to 1981. The system also lent itself naturally to photographic images, albeit at only moderate resolution. However, the pages typically took two or three times longer to load, compared to the European systems. NHK developed an experimental teletext system along similar lines, called CIBS ("Character Information Broadcasting Station"). Based on a 388×200 pixel resolution, it was first announced in 1976, and began trials in late 1978. (NHK's ultimate production teletext system launched in 1983). == Standards == Work to establish an international standard for videotex began in 1978 in CCITT. But the national delegations showed little interest in compromise, each hoping that their system would come to define what was perceived to be going to be an enormous new mass-market. In 1980 CCITT therefore issued recommendation S.100 (later T.100), noting the points of similarity but the essential incompatibility of the systems, and declaring all four to be recognised options. Trying to kick-start the market, AT&T Corporation entered the fray, and in May 1981 announced its own Presentation Layer Protocol (PLP). This was closely based on the Canadian Telidon system, but added to it some further graphics primitives and a syntax for defining macros, algorithms to define cleaner pixel spacing for the (arbitrarily sizeable) text, and also dynamically redefinable characters and a mosaic block graphic character set, so that it could reproduce content from the French Antiope. After some further revisions this was adopted in 1983 as ANSI standard X3.110, more commonly called NAPLPS, the North American Presentation Layer Protocol Syntax. It was also adopted in 1988 as the presentation-layer syntax for NABTS, the North American Broadcast Teletext Specification. Meanwhile, the European national Postal Telephone and Telegraph (PTT) agencies were also increasingly interested in videotex, and had convened discussions in European Conference of Postal and Telecommunications Administrations (CEPT) to co-ordinate developments, which had been diverging along national lines. As well as the British and French standards, the Swedes had proposed extending the British Prestel standard with a new se

    Read more →
  • MoFA Mitra

    MoFA Mitra

    MoFA Mitra is a mobile application launched by the Ministry of Foreign Affairs of Nepal to provide digital consular services, emergency support, rescue coordination, and complaint registration facilities for Nepali citizens living and working abroad. The application allows Nepali migrant workers, students, tourists, and Non-Resident Nepalis (NRNs) to access embassy services, emergency help, and official information directly from their smartphones. == Background == The need for a centralized digital support platform for Nepalis abroad had been discussed for several years due to increasing complaints related to labor exploitation, rescue delays, documentation problems, and lack of communication with Nepali diplomatic missions. Media organizations and migrant rights advocates had continuously highlighted issues faced by Nepali workers abroad, including human trafficking, fraudulent recruitment, delayed repatriation, and difficulties in receiving emergency assistance. In response, the Ministry of Foreign Affairs developed the MoFA Mitra app to digitize complaint handling, improve communication between embassies and citizens, and make emergency response faster and more accessible. == Features == The app includes several services and features for Nepali citizens abroad, including complaint registration, rescue coordination, embassy communication, and digital consular support services. Features of the application include: Online complaint registration Emergency rescue request system Direct contact with Nepali embassies and consulates Digital consular information Passport and document-related assistance Labor and migration support information Emergency hotline access Real-time notifications and alerts Location-based embassy information Tracking and coordination support for stranded citizens According to reports, the application was designed to simplify access to diplomatic services and strengthen emergency response coordination for Nepalis abroad. == Launch == The application was officially launched by Nepal’s Ministry of Foreign Affairs in Kathmandu in May 2026. Government officials stated that the app would strengthen Nepal’s digital governance system and improve support mechanisms for Nepali citizens residing overseas. Officials said the platform would help improve communication between Nepali diplomatic missions and citizens during emergencies and rescue operations. == Reception == The launch of the app received positive coverage from Nepali and international media outlets. Commentators described the initiative as a significant step toward modernization of Nepal’s diplomatic and consular services and digital governance infrastructure. Some observers also emphasized the importance of effective implementation, rapid response mechanisms, and continuous monitoring to ensure practical benefits for migrant workers abroad.

    Read more →