In automation production technology the actions performed by an automated process are executed by a program of instructions which is run during a work cycle. To execute work cycle programs, an automated system should be available to execute these advanced functions. == Safety monitoring == If there is a need for workers in an automated system, a safety monitoring is required for the occupational safety and health of the workers. In a safety monitoring various steps can take place including a complete stop of the system, sounding an alarm or reducing the operating speed. Usually, limiting switches are sensors like temperature probes, heat and smoke detectors or pressure sensitive floor pads. == Maintenance and repair diagnostics == There are three modes of operations which are used in a cycle of maintenance and repair diagnostics: status monitoring, failure diagnostics and recommendation of the repair procedure. In the status monitoring mode, the current system status is displayed. The failure diagnostics mode takes place when a failure occurs. The system will then suggest an adequate repair procedure to a team of experts. == Error detection and recovery == The error detection mode is a step to determine if and when a failure occurs in automated system. The possible errors can be divided into three categories. random errors, systematic errors and aberrations. While in the error recovery mode, remedy actions take place for all detected errors.
Compute (machine learning)
In machine learning and deep learning, compute is the amount of computing power or computational resources required to train machine learning models and large language models. More broadly, compute is the computational power or resources necessary for a computer or computer program to function. == Definition == Compute is commonly defined as the amount of computing power or computational resources required to train machine learning and large language models. The term "compute" has also been more broadly applied to cloud computing, referencing processing power, memory, networking, storage, and other resources required for the computation of any program. Compute is measured in petaflop/s-days and is used to document AI training. A petaflop/s-day (pfs-day) consists of performing 1015 neural net operations per second for one day, or a total of about 1020 operations. The compute-time product serves as a mental convenience, similar to kilowatt-hour for energy. An amount of compute is meant to give an idea of the number of actual operations performed. == History == In a 2018 analysis titled "AI and compute", artificial intelligence company OpenAI introduced the concept of compute. OpenAI identified two eras of training AI systems in terms of compute-usage. From 1959 to 2012, compute roughly followed Moore’s law. Between 2012 and 2018, the amount of compute used in the largest AI training runs increased exponentially, growing by more than 300,000 times — roughly doubling every 3.4 months. By comparison, Moore’s Law doubled every two years over the same period. One of the largest models, released in 2020, used 600,000 times more computing power than the 2012 model. After 2020, compute growth began to slow down, with the compute needed for the largest AI models continuing to slow down in 2023. The notion of compute has become increasingly used from the mid-2020s onwards. == Compute growth and AI progress == Larger AI models trained on more data and using more computational resources, tend to perform better. This happens even if the algorithms themselves remain unchanged. As early as 2018, OpenAI noted the exponential increase in compute to be have a key role in AI progress. OpenAI considers three factors drive the advance of AI: algorithmic innovation, data, and the amount of compute available for training. AI models with more compute not only improve in the tasks they were trained on but can develop emergent abilities. Incremental improvements can lead to more abrupt leaps in capabilities. AI provider SpaceXAI said in 2026 that their AI progress is driven by compute and used it a key metric in the AI training of its supercomputer Colossus, the which contains 1 million GPUs. Anthropic has a contract of $1.25 billion per month with SpaceXAI to buy all the compute capacity at Colossus 1 data center. === Criticism and policy === Increasing, promoting or constraining progress in artificial intelligence has often be done via controlling the amount of compute. Policymarkers have enacted policies and provided support to make compute resources more accessible to domestic AI researchers. In a January 2022 report, the Center for Security and Emerging Technology (CSET) suggested to institutions that increasingly powerful and generalizable AI (AGI) will likely require other strategies than maximizing compute. Some AI researchers are also concerned that government might exclusively focus on scaling compute instead of other strategies. The CSET has reported on the various bottlenecks which could explain why deep learning needs for compute have slow down: training is expensive and training extremely large models generates traffic jams across many processors that are difficult to manage. there is a limited supply of AI chips (see AI chip memory shortage). CSET advances that the main resource is human capital, specifically talented researchers — according to a 2023 published survey of more than 400 AI researchers, academic and private sector workers. The survey found that AI researchers are not primarily or exclusively constrained by compute access. However, both academic and industry AI researchers equally report concerns that insufficient compute could prevent them from contributing meaningfully to AI research in the future. High compute users are more concerned about compute access. When asked about which resource provided by the government would be the most useful to them, some AI researchers select compute, other prefer grant funding. For this goal, CSET advised policymakers to ensure that even researchers with smaller budgets could effectively contribute to AI research. Other proposed strategies include using contemporary AI algorithms, managing modern AI infrastructure or focusing on interdisciplinary work between the AI field and other fields of computer science. A 2024 study on compute access found that academic-only AI research teams often have less compute intensive research topics, especially foundation models, compared to industry AI labs. As a consequence, academia is likely to play a smaller role in advancing such techniques. The researchers suggest nationally-sponsored computing infrastructure as well as open science initiatives to boost academic compute access. === Data === A 2022 study found that current large language models are significantly under-trained, a consequence of focusing on scaling language models whilst keeping the amount of training data constant. By training over 400 language models of various parameter and token size, they found that "for compute-optimal training", the model size and the number of training tokens should ideally be scaled equally: for every doubling of model size the number of training tokens should also be doubled.
Physical schema
A physical data model (or database design) is a representation of a data design as implemented, or intended to be implemented, in a database management system. In the lifecycle of a project it typically derives from a logical data model, though it may be reverse-engineered from a given database implementation. A complete physical data model will include all the database artifacts required to create relationships between tables or to achieve performance goals, such as indexes, constraint definitions, linking tables, partitioned tables or clusters. Analysts can usually use a physical data model to calculate storage estimates; it may include specific storage allocation details for a given database system. As of 2012 seven main databases dominate the commercial marketplace: Informix, Oracle, Postgres, SQL Server, Sybase, IBM Db2 and MySQL. Other RDBMS systems tend either to be legacy databases or used within academia such as universities or further education colleges. Physical data models for each implementation would differ significantly, not least due to underlying operating-system requirements that may sit underneath them. For example: SQL Server runs only on Microsoft Windows operating-systems (Starting with SQL Server 2017, SQL Server runs on Linux. It's the same SQL Server database engine, with many similar features and services regardless of your operating system), while Oracle and MySQL can run on Solaris, Linux and other UNIX-based operating-systems as well as on Windows. This means that the disk requirements, security requirements and many other aspects of a physical data model will be influenced by the RDBMS that a database administrator (or an organization) chooses to use. == Physical schema == Physical schema is a term used in data management to describe how data is to be represented and stored (files, indices, etc.) in secondary storage using a particular database management system (DBMS) (e.g., Oracle RDBMS, Sybase SQL Server, etc.). In the ANSI/SPARC Architecture three schema approach, the internal schema is the view of data that involved data management technology. This is as opposed to an external schema that reflects an individual's view of the data, or the conceptual schema that is the integration of a set of external schemas. The logical schema was the way data were represented to conform to the constraints of a particular approach to database management. At that time the choices were hierarchical and network. Describing the logical schema, however, still did not describe how physically data would be stored on disk drives. That is the domain of the physical schema. Now logical schemas describe data in terms of relational tables and columns, object-oriented classes, and XML tags. A single set of tables, for example, can be implemented in numerous ways, up to and including an architecture where table rows are maintained on computers in different countries.
Encyclopaedistics
Encyclopaedistics or encyclopaedics as a discipline, is the academic scholarship of encyclopedias as sources of encyclopedic knowledge and cultural objects as well; in this sense, this discipline is also known as "encyclopaedia studies" and can be termed as "theoretical encyclopaediography" by analogy with theoretical lexicography. Encyclopaedistics as a practical activity (profession or business) also called "encyclopaedic practice" or "encyclopedism" is the process of assembling encyclopaedias available to the public for sale or for free (encyclopaedia publishing or practical encyclopediography). In this sense, it is the art or craft of writing, compiling, and editing the paper or online encyclopedias. As a practical activity, encyclopaedistics originated in the Middle Ages in connection with the development of compendiums based on alphabetical structuring (e.g. first edition of Polyanthea by Dominicus Nanus Mirabellius). Encyclopaedistics is often defined as "the art and science of selecting and disseminating the information most significant to mankind". == Field of study == Encyclopaedistics is a specialized aspect of information science and communication science. At the same time, encyclopaedistics is also considered as one of scholarly disciplines which are seen as auxiliary for historical research (auxiliary sciences of history) . Third, encyclopaedics is a domain of philosophy (Romanticism). This term associated with German philosophers of the 18th century, such as Novalis, Friedrich Schlegel, who sought to create a "Scientific Bible" - both real and ideal book as the quintessence of human education (enlightenment). In any case, the most popular topics in encyclopaedia studies refferd the history of organization of encyclopaedic knowledge, encyclopaedic knowledge determination and selection, glossary composition, current state of development of encyclopaedic activity, features of making encyclopaedias and encyclopaedic articles, usage, role and significance of encyclopaedias, typology of encyclopaedic literature, encyclopaedists and encyclopaedic schools, opposition of classical encyclopaedias and Wikipedia as well as paper encyclopaedias and online encyclopaedias, case experience in building encyclopedias etc. In general, scholarly studies contribute to appearance of successful well-crafted encyclopaedias with high-quality articles. == Contemporary encyclopaedic practice == Today, academic institutions, universities, and publishing companies worldwide are engaged in encyclopaedic activity building national, multinational (universal), regional and subject-specific encyclopaedias, or doing studies related encyclopaedias. The development of national encyclopaedias is one of the prerogatives of the European Parliament in the policy of protection of accurate and verified information and in the fight against mis- and disinformation as well as in the policy of protecting, promoting and projecting Europe's values and interests in the world.
Read–write conflict
In computer science, in the field of databases, read–write conflict, also known as unrepeatable reads, is a computational anomaly associated with interleaved execution of transactions. Specifically, a read–write conflict occurs when a "transaction requests to read an entity for which an unclosed transaction has already made a write request." Given a schedule S S = [ T 1 T 2 R ( A ) R ( A ) W ( A ) C o m . R ( A ) W ( A ) C o m . ] {\displaystyle S={\begin{bmatrix}T1&T2\\R(A)&\\&R(A)\\&W(A)\\&Com.\\R(A)&\\W(A)&\\Com.&\end{bmatrix}}} In this example, T1 has read the original value of A, and is waiting for T2 to finish. T2 also reads the original value of A, overwrites A, and commits. However, when T1 reads from A, it discovers two different versions of A, and T1 would be forced to abort, because T1 would not know what to do. This is an unrepeatable read. This could never occur in a serial schedule, in which each transaction executes in its entirety before another begins. Strict two-phase locking (Strict 2PL) or Serializable Snapshot Isolation (SSI) prevent this conflict. == Real-world example == Alice and Bob are using a website to book tickets for a specific show. Only one ticket is left for the specific show. Alice signs on first to see that only one ticket is left, and finds it expensive. Alice takes time to decide. Bob signs on and also finds one ticket left, and orders it instantly. Bob purchases and logs off. Alice decides to buy a ticket, to find there are no tickets. This is a typical read–write conflict situation.
Common Image Generator Interface
The Common Image Generator Interface (CIGI) (pronounced sig-ee), is an on-the-wire data protocol that allows communication between an Image Generator and its host simulation. The interface is designed to promote a standard way for a host device to communicate with an image generator (IG) within the industry. CIGI enables plug-and-play by standard-compliant image generator vendors and reduces integration costs when upgrading visual systems. == Background == Most high-end simulators do not have everything running on a single machine the way popular home software flight simulators are currently implemented. The airplane model is run on one machine, normally referred to as the host, and the out the window visuals or scene graph program is run on another, usually referred to as an Image Generator (IG). Frequently there are multiple IGs required to display the surrounding environment created by a host. CIGI is the interface between the 'host' and the IGs. The main goal of CIGI is to capitalize on previous investments through the use of a common interface. CIGI is designed to assist suppliers and integrators of IG systems with ease of integration, code reuse, and overall cost reduction. In the past most image generators provided their own proprietary interface; every host had to implement that interface making changing image generators a costly ordeal. CIGI was created to standardize the interface between the host and the image generator so that little modification would be needed to switch image generators. The CIGI initiative was largely spearheaded by The Boeing Company during the early 21st century. The latest version of CIGI (CIGI 4.0) was developed by the Simulation Interoperability Standards Organization (SISO) in the form of SISO-STD-013-2014, Standard for Common Image Generator Interface (CIGI), Version 4.0, dated 22 August 2014. SISO-STD-013-2014 is freely available from SISO. == Definitions == Image generator – In this context an image generator consists of one or more rendering channels that produce an image that can be used to visualize an “Out-The-Window” scene, or images produced by various sensor simulations such as Infra-red, Day TV, electro-optical, and night vision. Host simulation – In this context a “Host” is the computational system that provides information about the device being simulated so that the image generator can portray the correct scenery to the user. This information is passed via CIGI to the image generator. == Maturation == CIGI 4 is the latest version of the standard as was approved by the Simulation Interoperability Standards Organization on August 22, 2014. CIGI became an international SISO standard known as SISO-STD-013-2014; which contains the CIGI version 4.0 Interface Control Document (ICD). CIGI 4.0 is the official standard, published by SISO. Previous versions of CIGI were spearheaded by Boeing include CIGI v3.3, in November 2008, v3.2 April 2006, v3.1 June 2004, v3 November 2003, v2 in March 2002, and the original (v1) in March 2001 == Protocol dependencies == Typically, CIGI uses UDP as its transport protocol, but CIGI does not require a specific transport mechanism, only packet definition conformance. CIGI traffic does not have a well known port; however, the use of ports 8004-8005 has been widely adopted by commercial image generator vendors implementations. == Development tools == === Host Emulator === The Host Emulator can be used as a surrogate to manipulate the interface when a simulation Host is not available. It is a Windows-based image generator Host application used to develop, integrate and test image generators that use the CIGI protocol. It provides a graphical user interface (GUI) for the creation, modification and deletion of entities; manipulation of views; control of environmental attributes and phenomena; and other host functions. The Host Emulator has several features that are useful for integration and testing. A free-flight mode allows for fixed-wing and rotorcraft flight, movement along entity axes and free rotation using a joystick or a joystick-like widget. Scripting and record/playback features support regression testing, demonstrations and other tasks needing exact reproduction of certain sequences of events. A packet-level snoop feature allows the user to examine the contents of CIGI messages, image generator response times and latencies. A Heartbeat Monitor Window shows a graphical timing history of the Image Generator's data frame rate. Other features include explicit packet creation, animation control, missile flyouts and a situation display window (Host Emulator 3.x only). === Multi-Purpose Viewer === The Multi-Purpose Viewer (MPV) provides the basic functionality expected of an Image Generator, such as loading and displaying a terrain database, displaying entities and so forth. The Multi-Purpose Viewer can be used as a surrogate to manipulate the interface when a real Image Generator is not available. The MPV is capable of operating with both the Windows and Linux operating systems. === CIGI Class Library === The CCL is an object-oriented software interface that automatically handles message composition and decomposition (i.e. packing, unpacking and byte swapping to the ICD specification) on both the Host and Image Generator sides of the interface. The CCL interprets Host or Image Generator messages based on compile time parameters. It also performs error handling and translation between different versions of CIGI. Each packet type has its own class. The individual packet members are accessed through packet class accessors. Outgoing messages are constructed by placing each packet into the outgoing buffer using a streaming operator. Incoming messages are parsed using callback or event-based mechanisms that supply the using program with fully populated packet objects. === Current tool suite === A set of CIGI development tools are managed and maintained by the SISO CIGI Product Support Group. The latest packages are available on SourceForge. Comments/Suggestions to the package can be directed to the SISO discussion board at: https://discussions.sisostds.org/index.htm?A0=SAC-PSG-CIGI Archived 2017-09-13 at the Wayback Machine === Wireshark === Wireshark is a free and open source packet analyzer. It is used for network troubleshooting, analysis, software and communications protocol development, and education. Wireshark provides a dissector for CIGI packets. As of October 2016, “The CIGI dissector is fully functional for CIGI version 2 and 3. Version 1 is not yet implemented.” === Older versions of CIGI === A CIGI Interface Control Document (ICD) and development suite is available in open source format. The tools, ICD, and accompanying user documentation can be found and downloaded from the CIGI sourceforge web site. The SourceForge version of the MPV is limited in its support of CIGI data packets and is intended to grow as needs arise. The MPV uses CIGI 3 as its interface, but the MPV is backward-compatible with earlier CIGI versions through the use of the CCL. The MPV uses the Open Scene Graph library to render a scene. The scene graph is manipulated according to the CIGI commands received from the Host via the CCL. The MPV itself is an application layer that consists of a small kernel leveraging heavily on a plug-in architecture for ease of maintainability and flexibility. An implementer can implement the interface from scratch, however a full suite of integration tools is available. These tools consist of three elements. The Host Emulator (HE), the Multi-Purpose Viewer (MPV), and the CIGI Class Library (CCL).
Chinese speech synthesis
Chinese speech synthesis is the application of speech synthesis to the Chinese language (usually Standard Chinese). It poses additional difficulties due to Chinese characters frequently having different pronunciations in different contexts and the complex prosody, which is essential to convey the meaning of words, and sometimes the difficulty in obtaining agreement among native speakers concerning what the correct pronunciation is of certain phonemes. == Concatenation (Ekho and KeyTip) == Recordings can be concatenated in any desired combination, but the joins sound forced (as is usual for simple concatenation-based speech synthesis) and this can severely affect prosody; these synthesizers are also inflexible in terms of speed and expression. However, because these synthesizers do not rely on a corpus, there is no noticeable degradation in performance when they are given more unusual or awkward phrases. Ekho is an open source TTS which simply concatenates sampled syllables. It currently supports Cantonese, Mandarin, and experimentally Korean. Some of the Mandarin syllables have been pitched-normalised in Praat. A modified version of these is used in Gradint's "synthesis from partials". cjkware.com used to ship a product called KeyTip Putonghua Reader which worked similarly; it contained 120 Megabytes of sound recordings (GSM-compressed to 40 Megabytes in the evaluation version), comprising 10,000 multi-syllable dictionary words plus single-syllable recordings in 6 different prosodies (4 tones, neutral tone, and an extra third-tone recording for use at the end of a phrase). == Lightweight synthesizers (eSpeak and Yuet) == The lightweight open-source speech project eSpeak, which has its own approach to synthesis, has experimented with Mandarin and Cantonese. eSpeak was used by Google Translate from May 2010 until December 2010. The commercial product "Yuet" is also lightweight (it is intended to be suitable for resource-constrained environments like embedded systems); it was written from scratch in ANSI C starting from 2013. Yuet claims a built-in NLP model that does not require a separate dictionary; the speech synthesised by the engine claims clear word boundaries and emphasis on appropriate words. Communication with its author is required to obtain a copy. Both eSpeak and Yuet can synthesis speech for Cantonese and Mandarin from the same input text, and can output the corresponding romanisation (for Cantonese, Yuet uses Yale and eSpeak uses Jyutping; both use Pinyin for Mandarin). eSpeak does not concern itself with word boundaries when these don't change the question of which syllable should be spoken. == Corpus-based == A "corpus-based" approach can sound very natural in most cases but can err in dealing with unusual phrases if they can't be matched with the corpus. The synthesiser engine is typically very large (hundreds or even thousands of megabytes) due to the size of the corpus. === iFlyTek === Anhui USTC iFlyTek Co., Ltd (iFlyTek) published a W3C paper in which they adapted Speech Synthesis Markup Language to produce a mark-up language called Chinese Speech Synthesis Markup Language (CSSML) which can include additional markup to clarify the pronunciation of characters and to add some prosody information. The amount of data involved is not disclosed by iFlyTek but can be seen from the commercial products that iFlyTek have licensed their technology to; for example, Bider's SpeechPlus is a 1.3 Gigabyte download, 1.2 Gigabytes of which is used for the highly compressed data for a single Chinese voice. iFlyTek's synthesiser can also synthesise mixed Chinese and English text with the same voice (e.g. Chinese sentences containing some English words); they claim their English synthesis to be "average". The iFlyTek corpus appears to be heavily dependent on Chinese characters, and it is not possible to synthesize from pinyin alone. It is sometimes possible by means of CSSML to add pinyin to the characters to disambiguate between multiple possible pronunciations, but this does not always work. === NeoSpeech === There is an online interactive demonstration for NeoSpeech speech synthesis, which accepts Chinese characters and also pinyin if it's enclosed in their proprietary "VTML" markup. === Mac OS === Mac OS had Chinese speech synthesizers available up to version 9. This was removed in 10.0 and reinstated in 10.7 (Lion). === Historical corpus-based synthesizers (no longer available) === A corpus-based approach was taken by Tsinghua University in SinoSonic, with the Harbin dialect voice data taking 800 Megabytes. This was planned to be offered as a download but the link was never activated. Nowadays, only references to it can be found on Internet Archive. Bell Labs' approach, which was demonstrated online in 1997 but subsequently removed, was described in a monograph "Multilingual Text-to-Speech Synthesis: The Bell Labs Approach" (Springer, October 31, 1997, ISBN 978-0-7923-8027-6), and the former employee who was responsible for the project, Chilin Shih (who subsequently worked at the University of Illinois) put some notes about her methods on her website.