Enterprise data planning is the starting point for enterprise wide change. It states the destination and describes how you will get there. It defines benefits, costs and potential risks. It provides measures to be used along the way to judge progress and adjust the journey according to changing circumstances. Data is fundamental to investment enterprises. Effective, economic management of data underpins operations and enables transformations needed to satisfy customer demands, competition and regulation. Data warehouse(s) and other aspects of the overall data architecture are critical to the enterprise. EDMworks has created a strategic data planning approach for the Investment Sector. It consists of a planning process, planning intranets, templates and training materials. EDMworks planning process is based on the belief that extensive domain knowledge significantly shortens planning iterations and enables progressively higher quality plans to be produced and implemented. This approach drives the development of an effective and economic enterprise data architecture. Enterprise data planning is based on proven business disciplines. Key architectural layers for data and applications are then added in order to provide an enterprise wide understanding of the uses and interdependencies of data. This enables the definition of the core components of the EDM plan: Industry structure and business objectives Assessment of systems and services Target architecture for applications, data and infrastructure Target organization structures Systems, database, infrastructure and organizational plans Business case, costs, benefits, results and risks. EDMworks uses several components from the Open Systems Group TOGAF enterprise systems planning process. TOGAF acts as an extension to good business planning methods to provide a framework for the development of the systems and data architectural components. == History == James Martin was one of the pathfinders in data planning methodologies. He was one of the first to identify data as being an enterprise wide asset that required management. He developed a series of tools and methods to support that process. Most of the large consulting firms developed their own methods to address the same basic issue. Frequently, their approaches were incorporated into their own branded system development methodologies that encompassed the complete systems development life-cycle. Others, such as Ed Tozer, developed more focused offerings that dealt with the complexities of extracting key business needs from senior management and then defining relevant architectural visions for the specific enterprise. From these various sources, the concepts of Business, Data, Applications and Technology Architectures emerged. The Open Group Architectural Framework (TOGAF) has taken this work forward and has established a sound method in TOGAF version 9. EDMworks approach is to adopt these planning and architectural practices as a basis and then add two additional dimensions to the planning and implementation focus: Domain knowledge of the Investments sector. Investments is a complex global industry with a common set of characteristics about clients, information vendors, competition and regulation. Domain knowledge significantly improves the quality of the planning and implementation processes Development of people and teams. Change is a major feature of in any Enterprise Data Management program and people and teams both need development in order to make EDM effective throughout an organization.
Deep Learning Indaba
The Deep Learning Indaba is an annual conference and educational event that aims to strengthen machine learning and artificial intelligence (AI) capacity across Africa. Launched in 2017, it brings together students, researchers, industry practitioners, and policymakers from across the African continent. == History == The Deep Learning Indaba began in 2017 at the University of the Witwatersrand with over 300 participants from 23 African countries, offering tutorials in advanced AI topics and featuring notable speakers like Nando de Freitas. In 2018, it expanded to 650 delegates at Stellenbosch University, introducing parallel sessions to encourage collaboration. The 2019 edition in Nairobi, Kenya, reflected further growth, with increasing sponsorship and support from major tech companies like Google and Microsoft. === Deep Learning IndabaX ===
LCD crosstalk
LCD crosstalk is a visual defect in an LCD screen which occurs because of interference between adjacent pixels. Owing to the way rows and columns in the display are addressed, and charge is pushed around, the data on one part of the display has the potential to influence what is displayed elsewhere. This is generally known as crosstalk, and in matrix displays typically occurs in the horizontal and vertical directions. Crosstalk used to be a serious problem in the old passive-matrix (STN) displays, but is rarely discernable in modern active-matrix (TFT) displays. A fortunate side effect of inversion (see above) is that, for most display material, what little crosstalk there is largely cancelled out. For most practical purposes, the level of crosstalk in modern LCDs is negligible. Certain patterns, particularly those involving fine dots, can interact with the inversion and reveal visible crosstalk. If you try moving a small Window in front of the inversion pattern (above) which makes your screen flicker the most, you may well see crosstalk in the surrounding pattern. Different patterns are required to reveal crosstalk on different displays (depending on their inversion scheme).
Fyuse
Fyuse is a spatial photography app which lets users capture and share interactive 3D images. By tilting or swiping one's smartphone, one can view such "fyuses" from various angles — as if one were walking around an object or subject. The app blends photography and video to create an interactive medium and was first published for iOS in April 2014. The Android version was released at the end of 2014. == The app == Fyuse lets users capture panoramas, selfies, and full 360° views of objects and allows one to view captured moments from different angles. It has its own personal gallery, social network and standalone web integration. With the app, Fyusion also created a social networking platform similar to Instagram. Fyuses can be shared, commented on, liked and re-shared to one's followers (called Echoes). One can build a network of followers and with engagement tracking, one can see how many times an image has been interacted with The images can also be saved for private, offline view, or shared to other social networks, like Facebook or Twitter, or embedded on a website where the images can be interacted with by desktop users via dragging the mouse. Furthermore, in the compass tab other fyuses can be discovered using the app's system of tags and categories. One's Fyuse feed is prepopulated with top users, and one can follow people to see when they post a new fyuse. The app will also find one's friends if one signs up with Facebook or connects it with one's Twitter account. To create a fyuse one moves around a person or object with one's phone's camera in one direction or moving/tilting one's phone around while holding one's finger on the screen. By combining photography and video the app allows one to capture moments that one may not have otherwise been able to capture by recording not one moment in time but stitched together little moments. According to Fyusion CEO Radu Rusu, a photo freezes a moment in time, while a video captures moments in a linear timeline — both still flat, when viewed. A fyuse image captures a moment in space, where one can not only see one side of something, but also around it. When it is done rendering, fyuses can also be edited – one can trim the fyuse for length and edit the brightness, contrast, exposure, saturation and sharpness. One can also add a vignette and apply a filters, with options to adjust their intensity. After editing, one can write a description, add hashtags, and tag parts of the fyuse before one can (voluntarily) publish and share it. Version 1.0 has been described as "alpha prototype" and version 2.0 was released on 17 December 2014. Version 3.0 introduced 3D tagging by which users can layer 3D graphic that animate accordingly with each interaction to add some context to the content. Version 4.0 was released on December 21, 2016 for iOS. Since January 2016 (v3.2) the app allows the export of fyuses as Live Photos. The app has also been described as a more sophisticated version of 3D stickers and flip images. == Applications == The app has many applications for e-commerce such as for fashion designers who want to showcase a garment from every angle, or real estate listings and Airbnb-type sites that want to make their rental properties seem as enticing as possible. The app can also be used for interactive art, 360° panoramas and selfies. == History == San Francisco-based Fyusion Inc.'s three founders — Radu B. Rusu, CTO Stefan Holzer, and VP of Engineering Stephen Miller — worked together at Willow Garage, the robotics research lab started by early Google employee Scott Hassan in the area of "personal robotics" — Hassan decided to turn the lab into more of an incubator, suggesting that the members spin off their technologies into consumer-facing enterprises. Rusu first set out with an open-source 3D perception software startup called Open Perception. Fyusion was officially founded in 2013, and soon after Rusu and his cofounders patented the technology for spatial photography. The company closed a seed funding round at the end of May, raising $3.35 million from investors, including an angel investment from Sun Microsystems cofounder Andreas Bechtolsheim. In 2014 the Fyuse team consisted of 13 employees, mostly engineers and designers, recruited from around the globe. In March 2015 the team displayed their app at Katy Perry's premiere for the movie "Prismatic World Tour on Epix" where Perry also took Fyuse for a test run. == Augmented reality == In September 2016 Fyusion unveiled its platform for creating augmented reality content using ones smartphone. It takes the images from ones smartphone and converts them into 3D holographic images, which one can then view on an AR headset. According to Rusu "by making it easy for people to capture their surroundings on any mobile device, [Fyusion is] revolutionizing the way that people view the world around them" and also states that for "AR to be successful, anyone should be able to create content for it" opposed to the current "small number of content creators and an even smaller number of hardware players". According to him "the applications of [Fyusion's] technology for consumers and businesses are incredibly limitless". The platform uses the company's patented 3D spatio-temporal platform that uses advanced sensor fusion, machine learning and computer vision algorithms and part of the platform is built into the Fyuse app. Before committing to releasing a separate consumer product the company intends to wait until the HoloLens device becomes available to the public. Until then any Fyuse representation created using Fyuse is AR ready and will be able to be shown in HoloLens in the future. == Fyuse - Point of No Return == Fyuse - Point of No Return is a science fiction short advert for Fyuse 3.0 in which Fyuse's digital medium is extrapolated into the future. In the film a woman uses a mini scanning-drone to 3D scan a tree with Fyuse and later recreate it as an augmented reality object at another place.
OpenPipeline
openPipeline is an open-source plug-in for Autodesk Maya that is designed to assist in a Production Pipeline structure and Computer animation. == Development == Created in Maya Embedded Language, openPipeline was initiated at Eyebeam Atelier and further developed at Pratt Institute in the Digital Arts Lab. The initial release date was December 28, 2006. == Contributors == Rob O'Neill (Creator) Paris Mavroidis Meng-Han Ho
Comparison of video editing software
This is a comparison of non-linear video editing software applications. See also a more complete list of video editing software. == General information == This table gives basic general information about the different editors: === Active === === Discontinued / Inactive === ==== Definition ==== professional: used for full length Hollywood movies; professional (small): mainly used for paid commercials, short films or podcasts/YouTube channels; prosumer: Mainly targeting private use, anything that can do more than just trimming a film; basic: trimming a film; == System requirements == This table lists the operating systems that different editors can run on without emulation, as well as other system requirements. Note that minimum system requirements are listed; some features (like High Definition support) may be unavailable with these specifications. "Unix" includes the similar Linux, BSD and Unix-like operating systems. == High definition/High resolution import == The table below indicates the ability of each program to import various High Definition video or High resolution video formats for editing. == Feature set == == Output options == Please note that recording to Blu-ray does not imply 1080@50p/60p . Most only support up to 1080i 25/30 frames per second recording. Also not all formats can be output.
Robotics
Robotics is the interdisciplinary study and practice of the design, construction, operation, and use of robots. A roboticist is someone who specializes in robotics. Robotics usually combines four aspects of design work: a power source (e.g. a battery), mechanical construction, a control system (electrical circuits), and software (run by remote control or artificial intelligence). The goal of most robotics is to design machines that can assist humans in various fields, such as agriculture, construction, domestic work, food processing, inventory management, manufacturing, medicine, military, mining, space exploration, and transportation. Robots impact humans by displacing workers. Some expect this to occur at an increasing rate, leading to proposed solutions such as basic income. Robotics is itself a lucrative business that creates careers, especially for postgraduates. Roboticists often aim to create machines that seem to interface naturally with humans. The field is under active research and development, with areas of interest including robot kinematics and quantum robotics. == Design == Robotics usually combines four aspects of design work to create a robot: Power source: Potential energy sources include wired electricity, a battery, and/or petrol. Mechanical construction: A physical form or combination of forms is designed to functionally achieve tasks within a given range of environments. This can include locomotive elements such as wheels and caterpillar tracks, as well as hydraulic limbs and manipulators (e.g. hands). Control system: Electrical circuits (utilizing components such as diodes and transistors) are used to run software, govern motor movement, and read sensors. Software: A program is how a robot decides when or how to do something. Robotic programs can be run by remote control, artificial intelligence (AI), or a hybrid of the two. AI programming is an important part of robotic navigation and human–robot interaction. === Power source === Many different types of batteries can be used as a power source. Most are lead–acid batteries, which are safe and have relatively long shelf lives but are rather heavy compared to silver–cadmium batteries, which are much smaller in volume and much more expensive. Designing a battery-powered robot needs to take into account factors such as safety, cycle lifetime, and weight. Generators, often some type of internal combustion engine, can also be used, but are often mechanically complex and inefficient. Additionally, a tether could connect the robot to a power supply, saving weight and space, but requiring a cumbersome cable. Potential power sources include: Flywheel energy storage Hydraulics Nuclear Organic garbage (through anaerobic digestion) Pneumatics (compressed gases) Solar power === Mechanical construction === Actuators are the "muscles" of a robot, the parts which convert stored energy into movement. The most popular actuators are electric motors that rotate a wheel or gear and linear actuators that control factory robots. Most robots use electric motors—often brushed and brushless DC motors in portable robots or AC motors in industrial robots and computer numerical control machines—especially in systems with lighter loads and where the predominant form of motion is rotational. Meanwhile, linear actuators move in and out and often have quicker direction changes, particularly when large forces are needed, such as with industrial robotics. They are typically powered by oil or compressed air, but can also be powered by electricity, usually via a motor and a leadscrew. The mechanical rack and pinion is common. Recent alternatives to DC motors are piezoelectric motors, including ultrasonic motors, in which tiny piezoceramic elements vibrate many thousands of times per second, causing linear or rotary motion. One type uses the vibration of the piezo elements to step the motor in a circle or a straight line; another type uses the piezo elements to vibrate a nut or drive a screw. The advantages of these motors are nanometer resolution, speed, and force for their size. Series elastic actuation (SEA) relies on introducing intentional elasticity between the motor actuator and the load for robust force control. Due to the resultant lower reflected inertia, series elastic actuation improves safety during robot interactions or collisions. Further, it provides energy efficiency and shock absorption (mechanical filtering) while reducing excessive wear on the transmission and other components. This approach has successfully been employed in various robots, particularly advanced manufacturing robots and walking humanoid robots. The controller design of a series elastic actuator is most often performed within the passivity framework as it ensures the safety of interaction with unstructured environments. However, this framework suffers from stringent limitations imposed on the controller, which may impact performance. Pneumatic artificial muscles, also known as air muscles, are special tubes that expand (typically up to 42%) when air is forced inside them; they are used in some robot applications. Muscle wire, also known as shape memory alloy, is a material that contracts (under 5%) when electricity is applied; they have been used for some small robots. Electroactive polymers are a plastic material that can contract substantially (up to 380% activation strain) from electricity and have been used in the facial muscles and arms of humanoid robots, as well as to enable new robots to float, fly, swim or walk. Additionally, elastic carbon nanotubes are a promising experimental artificial muscle technology. The absence of defects in carbon nanotubes enables these filaments to deform elastically by several percent, with energy storage levels of perhaps 10 J/cm3 for metal nanotubes. Human biceps could be replaced with wire of this material measuring 8 millimetres (3⁄8 in) in diameter, feasibly allowing future robots to outperform humans. ==== Locomotion ==== Robots with only one or two wheel(s) can have advantages such as greater efficiency, reduced parts, and navigation through confined areas. A one-wheeled robot balances on a round ball; Carnegie Mellon University's Ballbot is the approximate height and width of a person. Several attempts have also been made to build spherical robots (also known as orb bots or ball bots), which move by spinning a weight inside the ball or rotating outer shells. Two-wheeled balancing robots generally use a gyroscope to detect how much a robot is falling and drive the wheels proportionally up to hundreds of times per second to counterbalance the fall, based on inverted pendulum dynamics. NASA's Robonaut has been mounted to a Segway for a similar effect. Most mobile robots have four wheels or continuous tracks. Six wheels can give better traction in outdoor terrain, while tracks provide even more grip. Tracked wheels are common for outdoor off-road robots, but are difficult to use indoors. A small number of skating robots have been developed, one of which is a multimodal walking and skating device with four legs and unpowered wheels. Several robots have been made that can walk on two legs, but not yet as reliably as a human. Many other robots have been built that walk on more than two legs, being significantly easier. Walking robots could be used for uneven terrains, providing a high degree of mobility and efficiency, but two-legged robots can currently only handle flat floors or perhaps stairs. Some approaches have included: The zero moment point (ZMP) is the algorithm used by robots such as Honda's ASIMO. The robot's onboard computer tries to keep the total inertial forces (the combination of Earth's gravity and the acceleration and deceleration of walking) exactly opposed by the floor reaction force (the force of the floor pushing back on the robot's foot). In this way, the two forces cancel out, leaving no moment (force causing the robot to rotate and fall over). Human observers note that this is not exactly how a human walks, with some describing ASIMO's walk as looking like it needs use the bathroom. ASIMO's walking algorithm utilizes some dynamic balancing, but requires a flat surface. Several robots, built in the 1980s by Marc Raibert at the MIT Leg Laboratory, successfully demonstrated very dynamic walking. Initially, a robot with only one leg, and a very small foot could stay upright simply by hopping. The movement is the same as that of a person on a pogo stick. As the robot falls to one side, it would jump slightly in that direction to catch itself. Soon, the algorithm was generalized to two and four legs. A bipedal robot was demonstrated running and even performing somersaults. A quadruped was also demonstrated which could trot, run, pace, and bound. A more advanced approach is a dynamic balancing algorithm, which constantly monitors the robot's motion and places the feet to maintain stability. This technique has been demonstrated by Anybots' Dexter robot (