In cryptography, subliminal channels are covert channels that can be used to communicate secretly in normal looking communication over an insecure channel. Subliminal channels in digital signature crypto systems were found in 1984 by Gustavus Simmons. Simmons describes how the "Prisoners' Problem" can be solved through parameter substitution in digital signature algorithms. == Examples == An easy example of a narrowband subliminal channel for normal human-language text would be to define that an even word count in a sentence is associated with the bit "0" and an odd word count with the bit "1". The question "Hello, how do you do?" would therefore send the subliminal message "1". The Digital Signature Algorithm has one subliminal broadband and three subliminal narrow-band channels == Improvements == A modification to the Brickell and DeLaurentis signature scheme provides a broadband channel without the necessity to share the authentication key. The Newton channel is not a subliminal channel, but it can be viewed as an enhancement. == Countermeasures == With the help of the zero-knowledge proof and the commitment scheme it is possible to prevent the usage of the subliminal channel. This countermeasure has a 1-bit subliminal channel because for is the problem that a proof can succeed or purposely fail. Another countermeasure can detect, and not prevent, the subliminal usage of the randomness.
Esdat
ESdat is a data management, analysis and reporting software for environmental and groundwater data, developed by EarthScience Information Systems (EScIS). It is used to manage many types of environmental data including laboratory chemistry (analytical results, QA data, lab sample planning, and electronic Chain of Custody), field chemistry (water, gas, and soil), hydrogeological data (groundwater, borehole and well construction, lithological, geotechnical and stratigraphic, and LNAPL), meteorological data (rain, wind, and temperature), emission data (dust deposition, HiVol, air quality, and noise) and logger data. Data can be compared against environmental standards or site-specific trigger levels to generate exceedence tables, time series graphs, maps, statistics, and other outputs. ESdat integrates with Power BI and ArcGIS and data can also be exported in a range of other database formats, including USEPA Regions 2,4 & 5, and NYS DEC. ESdat is used by environmental consultants, government, mining and industry for validation, interrogation, and reporting of data derived from complex environmental programs, such as contaminated sites, groundwater investigations, and regulatory compliance for landfills or mining operations.
Social media reach
Social media reach is a media analytics metric that refers to the number of users who have come across a particular content on a particular social media platform. Social media platforms have their own individual ways of tracking, analyzing and reporting the traffic on each of the individual platforms. As these platforms are a main source of communication between companies and their target audiences, by conducting research, companies are able to utilize analytical information, such as the reach of their posts, to better understand the interactions between the users and their content. There are multiple underlying factors that will determine what shows up on a newsfeed or timeline. Algorithms, for example, are a type of factor that can alter the reach of a post due to the way the algorithm is coded, which can affect who sees a post and when. Other examples of factors that can impede the reach can include the time at which posts are made, as well as how frequent the posts are between one another. In comparison, an impression is the total number of circumstances where content has been shown on a social timeline, meanwhile, engagement looks at how people interact with the content that they see on a social platform such as like, share or retweet. == Reach on Facebook == Facebook has their own analytic platform which allows the user to see how other users are interacting with their posts, with the use of multiple metrics. This is not something the average user uses, but rather a tool that is used by pages or public figures. For example, Facebook pages that represent a business often look at the activity their posts have generated. There are three types of reach that can be looked at on the Facebook analytic platform. === Types of reach === ==== Organic Reach ==== This type of reach regards the number of distinct users that have seen a specific post on their feed. Organic reach, in other words is the number of people who have seen the post being analyzed on their Facebook newsfeed. Data gathered from this type of reach can give intel to those doing the analysis, such as the demographics of those who have seen the post. ==== Paid Reach ==== This type of reach regards the number of times that distinct users have come across sponsored posts, ads or content. In other words, paid reach is the number of times Facebook users have seen a post that has been paid for by a company. Data collected can give insight, to advertisers or marketers for example, on the activity based around the reach of their post. ==== Viral Reach ==== This type of reach regards the number of views by distinct users on posts that have been commented on or shared by their friends on Facebook. In other words, viral reach looks at the number of people who have seen a post after a friend of theirs commented or shared the original post, therefore it showed on their timeline. Viral reach can be looked at in terms of a collective number of times that the post has been on individual user's timelines. Data collected from viral reach can be used in multiple ways, for example, it can be used to analyze the type of content that gets shared or commented on and can be further used to compare to other posts. === Engaged users === This refers to the number of individual users who have clicked and interacted with a post on Facebook. == Reach on Twitter == Twitter gives access to any of their users to analytics of their tweets as well as their followers. Their dashboard is user friendly, which allows anyone to take a look at the analytics behind their Twitter account. This open access is useful for both the average user and companies as it can provide a quick glance or general outlook of who has seen their tweets. The way that Twitter works is slightly different than the way of Facebook in terms of the reach. On Twitter, especially for users with a higher profile, they are not only engaging with the people who follow them, but also with the followers of their own followers. The reach metric on Twitter looks at the quantity of Twitter users who have been engaged, but also the number of users that follow them as well. This metric is useful to see the if the tweets/content being shared on Twitter are contributing to the growth of audience on this platform. == Reach on Instagram == Instagram gives their users access to their reach, in the Instagram Insights section. Instagram insights can be used to learn more about an account's followers and performance. Reach indicates the total number of unique Instagram accounts that have seen your Instagram post or story. You can find this data by looking at each individual post insights. == Uses of reach == The reach can be a useful metric to analyze for marketers and advertisers. Social media is a platform that is used by marketers to directly target their intended audience with ease. These platforms not only allow marketers to get a better understanding of their audience, but also allow advertisers to insert their ads onto the timelines of specific users to later be able to conduct research to see the reach of their posts/content. The basic goal of marketers is to increase their reach as much as possible to impact bigger audiences of their dream customers and, in the end, make more sales. When doing organic social media marketing, using paid methods like ads or doing influencer marketing whether it is paid or free, it allows marketers to track the performance of their strategy and tweak it based on what works and what does not. == Analytics and reach == Social analytics looks at the data collected based on the interactions of users on social media platforms. A lot of information can be gathered which can provide intel based on user activities on social media. When looking into analytics in regard to social media, each company or group has a different goal in mind to engage their audience. At a glance, the three might seem as if they are very similar, however the differences between them are significant. There are many aspects that can be analyzed from the data gathered from social media platforms, depending on what is being observed, the correct metric would then be selected to further analyze. One example of the many metrics that can be used through social analytics is the reach. == Reach formula == To calculate social media reach one can use the following formula: R = I f ¯ {\displaystyle R={\frac {I}{\bar {f}}}} where R {\displaystyle R} — is social media reach, I {\displaystyle I} stands for the number of impressions, f ¯ {\displaystyle {\bar {f}}} is the average frequency of impressions per user. f ¯ {\displaystyle {\bar {f}}} represents the number of events when the ad is shown to a particular user. The average value should be calculated over the time period with stable settings of advertisement campaign. == Commenting For Better Reach == Commenting For Better Reach also known as "CFBR" is a widely used strategy for organically boosting post reach on social media platforms. Algorithms tend to favor posts with substantial likes and comments, granting them broader exposure compared to less engaging content. Primarily seen on LinkedIn, a platform geared toward professional networking and business connections, the use of CFBR signals active engagement aimed at enhancing post visibility. It is important to note that genuine and meaningful comments are key to effective engagement. Spammy or irrelevant comments not only detract from the conversation but may also limit a post's potential reach and impact.
Data independence
Data independence is the type of data transparency that matters for a centralized DBMS. It refers to the immunity of user applications to changes made in the definition and organization of data. Application programs should not, ideally, be exposed to details of data representation and storage. The DBMS provides an abstract view of the data that hides such details. There are two types of data independence: physical and logical data independence. The data independence and operation independence together gives the feature of data abstraction. There are two levels of data independence. == Logical data independence == The logical structure of the data is known as the 'schema definition'. In general, if a user application operates on a subset of the attributes of a relation, it should not be affected later when new attributes are added to the same relation. Logical data independence indicates that the conceptual schema can be changed without affecting the existing schemas. == Physical data independence == The physical structure of the data is referred to as "physical data description". Physical data independence deals with hiding the details of the storage structure from user applications. The application should not be involved with these issues since, conceptually, there is no difference in the operations carried out against the data. There are three types of data independence: Logical data independence: The ability to change the logical (conceptual) schema without changing the External schema (User View) is called logical data independence. For example, the addition or removal of new entities, attributes, or relationships to the conceptual schema or having to rewrite existing application programs. Physical data independence: The ability to change the physical schema without changing the logical schema is called physical data independence. For example, a change to the internal schema, such as using different file organization or storage structures, storage devices, or indexing strategy, should be possible without having to change the conceptual or external schemas. View level data independence: always independent no effect, because there doesn't exist any other level above view level. == Data independence == Data independence can be explained as follows: Each higher level of the data architecture is immune to changes of the next lower level of the architecture. The logical scheme stays unchanged even though the storage space or type of some data is changed for reasons of optimization or reorganization. In this, external schema does not change. In this, internal schema changes may be required due to some physical schema were reorganized here. Physical data independence is present in most databases and file environment in which hardware storage of encoding, exact location of data on disk, merging of records, so on this are hidden from user. == Data independence types == The ability to modify schema definition in one level without affecting schema of that definition in the next higher level is called data independence. There are two levels of data independence, they are Physical data independence and Logical data independence. Physical data independence is the ability to modify the physical schema without causing application programs to be rewritten. Modifications at the physical level are occasionally necessary to improve performance. It means we change the physical storage/level without affecting the conceptual or external view of the data. The new changes are absorbed by mapping techniques. Logical data independence is the ability to modify the logical schema without causing application programs to be rewritten. Modifications at the logical level are necessary whenever the logical structure of the database is altered (for example, when money-market accounts are added to banking system). Logical Data independence means if we add some new columns or remove some columns from table then the user view and programs should not change. For example: consider two users A & B. Both are selecting the fields "EmployeeNumber" and "EmployeeName". If user B adds a new column (e.g. salary) to his table, it will not affect the external view for user A, though the internal schema of the database has been changed for both users A & B. Logical data independence is more difficult to achieve than physical data independence, since application programs are heavily dependent on the logical structure of the data that they access.
Strong cryptography
Strong cryptography or cryptographically strong are general terms used to designate the cryptographic algorithms that, when used correctly, provide a very high (usually insurmountable) level of protection against any eavesdropper, including the government agencies. There is no precise definition of the boundary line between the strong cryptography and (breakable) weak cryptography, as this border constantly shifts due to improvements in hardware and cryptanalysis techniques. These improvements eventually place the capabilities once available only to the NSA within the reach of a skilled individual, so in practice there are only two levels of cryptographic security, "cryptography that will stop your kid sister from reading your files, and cryptography that will stop major governments from reading your files" (Bruce Schneier). The strong cryptography algorithms have high security strength, for practical purposes usually defined as a number of bits in the key. For example, the United States government, when dealing with export control of encryption, considered as of 1999 any implementation of the symmetric encryption algorithm with the key length above 56 bits or its public key equivalent to be strong and thus potentially a subject to the export licensing. To be strong, an algorithm needs to have a sufficiently long key and be free of known mathematical weaknesses, as exploitation of these effectively reduces the key size. At the beginning of the 21st century, the typical security strength of the strong symmetrical encryption algorithms is 128 bits (slightly lower values still can be strong, but usually there is little technical gain in using smaller key sizes). Demonstrating the resistance of any cryptographic scheme to attack is a complex matter, requiring extensive testing and reviews, preferably in a public forum. Good algorithms and protocols are required (similarly, good materials are required to construct a strong building), but good system design and implementation is needed as well: "it is possible to build a cryptographically weak system using strong algorithms and protocols" (just like the use of good materials in construction does not guarantee a solid structure). Many real-life systems turn out to be weak when the strong cryptography is not used properly, for example, random nonces are reused A successful attack might not even involve algorithm at all, for example, if the key is generated from a password, guessing a weak password is easy and does not depend on the strength of the cryptographic primitives. A user can become the weakest link in the overall picture, for example, by sharing passwords and hardware tokens with the colleagues. == Background == The level of expense required for strong cryptography originally restricted its use to the government and military agencies, until the middle of the 20th century the process of encryption required a lot of human labor and errors (preventing the decryption) were very common, so only a small share of written information could have been encrypted. US government, in particular, was able to keep a monopoly on the development and use of cryptography in the US into the 1960s. In the 1970, the increased availability of powerful computers and unclassified research breakthroughs (Data Encryption Standard, the Diffie-Hellman and RSA algorithms) made strong cryptography available for civilian use. Mid-1990s saw the worldwide proliferation of knowledge and tools for strong cryptography. By the 21st century the technical limitations were gone, although the majority of the communication were still unencrypted. At the same the cost of building and running systems with strong cryptography became roughly the same as the one for the weak cryptography. The use of computers changed the process of cryptanalysis, famously with Bletchley Park's Colossus. But just as the development of digital computers and electronics helped in cryptanalysis, it also made possible much more complex ciphers. It is typically the case that use of a quality cipher is very efficient, while breaking it requires an effort many orders of magnitude larger - making cryptanalysis so inefficient and impractical as to be effectively impossible. == Cryptographically strong algorithms == This term "cryptographically strong" is often used to describe an encryption algorithm, and implies, in comparison to some other algorithm (which is thus cryptographically weak), greater resistance to attack. But it can also be used to describe hashing and unique identifier and filename creation algorithms. See for example the description of the Microsoft .NET runtime library function Path.GetRandomFileName. In this usage, the term means "difficult to guess". An encryption algorithm is intended to be unbreakable (in which case it is as strong as it can ever be), but might be breakable (in which case it is as weak as it can ever be) so there is not, in principle, a continuum of strength as the idiom would seem to imply: Algorithm A is stronger than Algorithm B which is stronger than Algorithm C, and so on. The situation is made more complex, and less subsumable into a single strength metric, by the fact that there are many types of cryptanalytic attack and that any given algorithm is likely to force the attacker to do more work to break it when using one attack than another. There is only one known unbreakable cryptographic system, the one-time pad, which is not generally possible to use because of the difficulties involved in exchanging one-time pads without them being compromised. So any encryption algorithm can be compared to the perfect algorithm, the one-time pad. The usual sense in which this term is (loosely) used, is in reference to a particular attack, brute force key search — especially in explanations for newcomers to the field. Indeed, with this attack (always assuming keys to have been randomly chosen), there is a continuum of resistance depending on the length of the key used. But even so there are two major problems: many algorithms allow use of different length keys at different times, and any algorithm can forgo use of the full key length possible. Thus, Blowfish and RC5 are block cipher algorithms whose design specifically allowed for several key lengths, and who cannot therefore be said to have any particular strength with respect to brute force key search. Furthermore, US export regulations restrict key length for exportable cryptographic products and in several cases in the 1980s and 1990s (e.g., famously in the case of Lotus Notes' export approval) only partial keys were used, decreasing 'strength' against brute force attack for those (export) versions. More or less the same thing happened outside the US as well, as for example in the case of more than one of the cryptographic algorithms in the GSM cellular telephone standard. The term is commonly used to convey that some algorithm is suitable for some task in cryptography or information security, but also resists cryptanalysis and has no, or fewer, security weaknesses. Tasks are varied, and might include: generating randomness encrypting data providing a method to ensure data integrity Cryptographically strong would seem to mean that the described method has some kind of maturity, perhaps even approved for use against different kinds of systematic attacks in theory and/or practice. Indeed, that the method may resist those attacks long enough to protect the information carried (and what stands behind the information) for a useful length of time. But due to the complexity and subtlety of the field, neither is almost ever the case. Since such assurances are not actually available in real practice, sleight of hand in language which implies that they are will generally be misleading. There will always be uncertainty as advances (e.g., in cryptanalytic theory or merely affordable computer capacity) may reduce the effort needed to successfully use some attack method against an algorithm. In addition, actual use of cryptographic algorithms requires their encapsulation in a cryptosystem, and doing so often introduces vulnerabilities which are not due to faults in an algorithm. For example, essentially all algorithms require random choice of keys, and any cryptosystem which does not provide such keys will be subject to attack regardless of any attack resistant qualities of the encryption algorithm(s) used. == Legal issues == Widespread use of encryption increases the costs of surveillance, so the government policies aim to regulate the use of the strong cryptography. In the 2000s, the effect of encryption on the surveillance capabilities was limited by the ever-increasing share of communications going through the global social media platforms, that did not use the strong encryption and provided governments with the requested data. Murphy talks about a legislative balance that needs to be struck between the power of the government that are broad enough to be able to follow the qui
Imaging phantom
An imaging phantom, or simply phantom (less commonly spelled fantom), is a specially designed object that is scanned or imaged in the field of medical imaging to evaluate, analyze, and tune the performance of various imaging devices. A phantom is more readily available and provides more consistent results than the use of a living subject or cadaver, while also avoiding direct risks to living subjects. Phantoms were originally employed in 2D x-ray–based imaging techniques such as radiography or fluoroscopy, but more recently phantoms with desired imaging characteristics have been developed for 3D techniques such as SPECT, MRI, CT, ultrasound, PET, and other imaging modalities. == Design == A phantom used to evaluate an imaging device should respond in a similar manner to how human tissues and organs would act in that specific imaging modality. For instance, phantoms made for 2D radiography may hold various quantities of x-ray contrast agents with similar x-ray absorbing properties (such as the attenuation coefficient) to normal tissue to tune the contrast of the imaging device or modulate the patient's exposure to radiation. In such a case, the radiography phantom would not necessarily need to have similar textures and mechanical properties since these are not relevant in x-ray imaging modalities. However, in the case of ultrasonography, a phantom with similar rheological and ultrasound scattering properties to real tissue would be essential, but x-ray absorbing properties would not be relevant. The term "phantom" describes an object that is designed to resemble human tissue and can be evaluated, analyzed or manipulated to study the performance of a medical device. Phantoms are created using a digital file that is rendered through magnetic resonance imaging (MRI) or computer-aided design (CAD). The digital files allow for quick modifications that are read by the 3D printer. The 3D printer will create the product in successive layers using polymeric materials. There are several types of phantoms including tissue-mimicking, radiological phantoms, dental phantoms, BOMABs (used to calibrate whole-body counters), and more.
Cut, copy, and paste
Cut, copy, and paste are essential commands of modern human–computer interaction and user interface design. They offer an interprocess communication technique for transferring data through a computer's user interface. The cut command removes the selected data from its original position, and the copy command creates a duplicate; in both cases the selected data is kept in temporary storage called the clipboard. Clipboard data is later inserted wherever a paste command is issued. The data remains available to any application supporting the feature, thus allowing easy data transfer between applications. The command names are a (skeuomorphic) interface metaphor based on the physical procedure used in manuscript print editing to create a page layout, like with paper. The commands were pioneered into computing by Xerox PARC in 1974, popularized by Apple Computer in the 1983 Lisa workstation and the 1984 Macintosh computer, and in a few home computer applications such as the 1984 word processor Cut & Paste. This interaction technique has close associations with related techniques in graphical user interfaces (GUIs) that use pointing devices such as a computer mouse (by drag and drop, for example). Typically, clipboard support is provided by an operating system as part of its GUI and widget toolkit. The capability to replicate information with ease, changing it between contexts and applications, involves privacy concerns because of the risks of disclosure when handling sensitive information. Terms like cloning, copy forward, carry forward, or re-use refer to the dissemination of such information through documents, and may be subject to regulation by administrative bodies. == History == === Origins === The term "cut and paste" comes from the traditional practice in manuscript editing, whereby people cut paragraphs from a page with scissors and paste them onto another page. This practice remained standard into the 1980s. Stationery stores sold "editing scissors" with blades long enough to cut an 8½"-wide page. The advent of photocopiers made the practice easier and more flexible. The act of copying or transferring text from one part of a computer-based document ("buffer") to a different location within the same or different computer-based document was a part of the earliest on-line computer editors. As soon as computer data entry moved from punch-cards to online files (in the mid/late 1960s) there were "commands" for accomplishing this operation. This mechanism was often used to transfer frequently-used commands or text snippets from additional buffers into the document, as was the case with the QED text editor. === Early methods === The earliest editors (designed for teleprinter terminals) provided keyboard commands to delineate a contiguous region of text, then delete or move it. Since moving a region of text requires first removing it from its initial location and then inserting it into its new location, various schemes had to be invented to allow for this multi-step process to be specified by the user. Often this was done with a "move" command, but some text editors required that the text be first put into some temporary location for later retrieval/placement. In 1983, the Apple Lisa became the first text editing system to call that temporary location "the clipboard". Earlier control schemes such as NLS used a verb—object command structure, where the command name was provided first and the object to be copied or moved was second. The inversion from verb—object to object—verb on which copy and paste are based, where the user selects the object to be operated before initiating the operation, was an innovation crucial for the success of the desktop metaphor as it allowed copy and move operations based on direct manipulation. === Popularization === Inspired by early line and character editors, such as Pentti Kanerva's TV-Edit, that broke a move or copy operation into two steps—between which the user could invoke a preparatory action such as navigation—Lawrence G. "Larry" Tesler proposed the names "cut" and "copy" for the first step and "paste" for the second step. Beginning in 1974, he and colleagues at Xerox PARC implemented several text editors that used cut/copy-and-paste commands to move and copy text. Apple Computer popularized this paradigm with its Lisa (1983) and Macintosh (1984) operating systems and applications. The functions were mapped to key combinations using the ⌘ Command key as a special modifier, which is held down while also pressing X for cut, C for copy, or V for paste. These few keyboard shortcuts allow the user to perform all the basic editing operations, and the keys are clustered at the left end of the bottom row of the standard QWERTY keyboard. These are the standard shortcuts: Control-Z (or ⌘ Command+Z) to undo Control-X (or ⌘ Command+X) to cut Control-C (or ⌘ Command+C) to copy Control-V (or ⌘ Command+V) to paste The IBM Common User Access (CUA) standard also uses combinations of the Insert, Del, Shift and Control keys. Early versions of Windows used the IBM standard. Microsoft later also adopted the Apple key combinations with the introduction of Windows, using the control key as modifier key. Similar patterns of key combinations, later borrowed by others, are widely available in most GUI applications. The original cut, copy, and paste workflow, as implemented at PARC, utilizes a unique workflow: With two windows on the same screen, the user could use the mouse to pick a point at which to make an insertion in one window (or a segment of text to replace). Then, by holding shift and selecting the copy source elsewhere on the same screen, the copy would be made as soon as the shift was released. Similarly, holding shift and control would copy and cut (delete) the source. This workflow requires many fewer keystrokes/mouse clicks than the current multi-step workflows, and did not require an explicit copy buffer. It was dropped, one presumes, because the original Apple and IBM GUIs were not high enough density to permit multiple windows, as were the PARC machines, and so multiple simultaneous windows were rarely used. == Cut and paste == Computer-based editing can involve very frequent use of cut-and-paste operations. Most software-suppliers provide several methods for performing such tasks, and this can involve (for example) key combinations, pulldown menus, pop-up menus, or toolbar buttons. The user selects or "highlights" the text or file for moving by some method, typically by dragging over the text or file name with the pointing-device or holding down the Shift key while using the arrow keys to move the text cursor. The user performs a "cut" operation via key combination Ctrl+x (⌘+x for Macintosh users), menu, or other means. Visibly, "cut" text immediately disappears from its location. "Cut" files typically change color to indicate that they will be moved. Conceptually, the text has now moved to a location often called the clipboard. The clipboard typically remains invisible. On most systems only one clipboard location exists, hence another cut or copy operation overwrites the previously stored information. Many UNIX text-editors provide multiple clipboard entries, as do some Macintosh programs such as Clipboard Master, and Windows clipboard-manager programs such as the one in Microsoft Office. The user selects a location for insertion by some method, typically by clicking at the desired insertion point. A paste operation takes place which visibly inserts the clipboard text at the insertion point. (The paste operation does not typically destroy the clipboard text: it remains available in the clipboard and the user can insert additional copies at other points). Whereas cut-and-paste often takes place with a mouse-equivalent in Windows-like GUI environments, it may also occur entirely from the keyboard, especially in UNIX text editors, such as Pico or vi. Cutting and pasting without a mouse can involve a selection (for which Ctrl+x is pressed in most graphical systems) or the entire current line, but it may also involve text after the cursor until the end of the line and other more sophisticated operations. The clipboard usually stays invisible, because the operations of cutting and pasting, while actually independent, usually take place in quick succession, and the user (usually) needs no assistance in understanding the operation or maintaining mental context. Some application programs provide a means of viewing, or sometimes even editing, the data on the clipboard. == Copy and paste == The term "copy-and-paste" refers to the popular, simple method of reproducing text or other data from a source to a destination. It differs from cut and paste in that the original source text or data does not get deleted or removed. The popularity of this method stems from its simplicity and the ease with which users can move data between various applications visually – without resorting to permanent storage. Use in healthcare do