Philco was one of the pioneers of transistorized computers, also known as second-generation computers. After the company developed the surface-barrier transistor, which was much faster than previous point-contact types, it was awarded contracts for military and government computers. Commercialized derivatives of some of these designs became successful business and scientific computers. The TRANSAC (Transistor Automatic Computer) Model S-1000 was released as a scientific computer. The TRANSAC S-2000 mainframe computer system was first produced in 1958, and a family of compatible machines, with increasing performance, was released over the next several years. However, the mainframe computer market was dominated by IBM. Other companies could not deploy resources for development, customer support and marketing on the scale that IBM could afford, making competition in this segment difficult after the introduction of the IBM 360 family. Philco went bankrupt and was purchased in 1961 by Ford Motor Company, but the computer division carried on until the Philco division of Ford exited the computer business in 1963. The Ford company maintained one Philco mainframe in use until 1981. == The surface-barrier transistor == The surface-barrier transistor developed by Philco in 1953 had a much higher frequency response than the original point-contact transistors. The transistor was made of a thin crystal of germanium, which was electrolytically etched with pits on either side forming a very thin base region, on the order of 5 micrometers. Philco's process for etching was United States patent number 2,885,571. Philco surface-barrier transistors were used in TX-0, and in early models of what would become the DEC PDP product line. Although relatively fast, the small size of the devices limited their power to circuits operating at a few tens of milliwatts. == Military and government == Between 1955 and 1957, Philco built transistor computers for use in aircraft, models C-1000, C-1100, and C-1102, intended for airborne real-time applications. By 1957, the C-1102 had been used by a civilian sector customer. The BASICPAC AN/TYK 6V (first delivery in 1961), COMPAC AN/TYK 4V (not completed), and LOGICPAC systems were built for the US Army as transportable computer systems for use with their Fieldata concept of integrated information management. BASICPAC was a transistorized computer with up to 28,672 words of 38-bit core memory (including sign and parity), available in several configurations from a minimum system, to a truck-borne mobile version, to a fully expanded system. Basic clock periods was 1 microsecond (which gives a clock rate of 1 MHz), with 12 microsecond memory access and a fixed-point multiplication taking 242 microseconds. Input/output was by paper tape reader and punch, or through a teletypewriter. With additional hardware, magnetic tape storage was also available, with up to seven I/O devices. The instruction set had 31 basic operation codes and nine opcodes for I/O === CXPQ === Philco was contracted by the US Navy to build the CXPQ computer. One model was completed and installed at the David Taylor Model Basin. This design was later adapted to become the commercial TRANSAC S-2000. Only one CXPQ was built. The CXPQ is a 48-bit transistorized computer. === SOLO === In 1955, the National Security Agency through the US Navy contracted with Philco to produce a computer suitable for use as a workstation, with an architecture based on the vacuum-tube computer system called Atlas II already in use at the NSA, and similar to the commercial UNIVAC 1103. At the time, Philco was the largest producer of surface barrier transistors, which were the only type available with the speed and quantities required for a computer. The SOLO prototype was delivered in 1958, but required extensive debugging at NSA. Difficulties were encountered with core memory and power supplies. SOLO used paper tape and teleprinter machines for input and output. SOLO cost about $1 million US, and contained 8,000 transistors. While the system was extensively used for training, testing, research and development, no additional units were ordered. SOLO was removed from active service in 1963. The design of the SOLO became commercialized as Philco's TRANSAC Model S-1000. == Commercial == === S-1000 === The TRANSAC S-1000 was a scientific computer with a 36-bit word length and 4096 words of core memory. It was packaged in a container about the size of a large office desk, and used only 1.2 kilowatts, much less than vacuum-tube-based computers of similar capacity. In a 1961 survey, about 15 S-1000 computer installations had been identified. It weighed about 1,650 pounds (750 kg). === S-2000 === The TRANSAC S-2000 was a large mainframe system intended for both business and scientific work. It had a 48-bit word length and supported calculations in fixed point, floating point and binary-coded decimal formats. The original S-2000 "TRANSAC" (Transistor Automatic Computer) released in 1958 was later designated Model 210; it was used internally at Philco. Similar to the Control Data Corporation Model 1604, it was a 48-bit fully transistorized computer. Three succeeding models were released in the series, all compatible with the software of the original model. The Model 211 was introduced in 1960, using micro-alloy diffused field-effect transistors, requiring significant redesign of circuits compared to the original. The TRANSAC S-2000/Philco 210/211 weighed about 2,000 pounds (910 kg). By 1964, eighteen Model 210, eighteen Model 211 and seven Model 212 systems had been sold. After Philco was purchased by Ford Motor Company, the Model 212 was introduced in 1962 and released in 1963. It had 65,535 words of 48-bit memory. Initially made with 6-microsecond core memory, it had better performance than the IBM 7094 transistor computer. It was later upgraded in 1964 to 2-microsecond core memory, which gave the machine floating-point performance greater than the IBM 7030 Stretch computer. A Model 213 was announced in 1964 but never built. By that time competition from IBM had made the Philco computer operations no longer profitable for Ford, and the division was closed down. The Model 212 could carry out a floating-point multiplication in 22 microseconds. Each word contained two 24-bit instructions with 16 bits of address information and eight bits for the opcode. There were 225 different valid opcodes in the Model 212; invalid opcodes were detected and halted the machine. The CPU had an accumulator register of 48 bits, three general-purpose registers of 24 bits, and 32 index registers of 15 bits. Main memory size ranged from 4K words to 64K words. Only the first model had a magnetic drum memory; later editions used tape drives. The Model 212 weighed about 6,500 pounds (3.3 short tons; 2.9 t). Software for the S-2000 initially consisted of TAC (Translator-Assembler-Compiler), and ALTAC, a FORTRAN II-like language with some differences from the IBM 704 FORTRAN implementation. A COBOL compiler was also available, targeted at business applications. The Philco 2400 was the input/output system for the S-2000. Operations such as reading cards or printing were carried out through magnetic tapes, thereby offloading the S-2000 from relatively slow input/output processing. The 2400 had a 24-bit word length and could be supplied with 4K to 32K characters (1K to 8K words) of core memory, rated at 3-microsecond cycle time. The instruction set was aimed at character I/O use. The idea of base registers, implemented in Philco computers, influenced the design of IBM/360. The last Philco TRANSAC S-2000 Model 212 was taken out of service in December 1981, after 19 years of service at Ford.
Automated Mathematician
The Automated Mathematician (AM) is one of the earliest successful discovery systems. It was created by Douglas Lenat in Lisp, and in 1977 led to Lenat being awarded the IJCAI Computers and Thought Award. AM worked by generating and modifying short Lisp programs which were then interpreted as defining various mathematical concepts; for example, a program that tested equality between the length of two lists was considered to represent the concept of numerical equality, while a program that produced a list whose length was the product of the lengths of two other lists was interpreted as representing the concept of multiplication. The system had elaborate heuristics for choosing which programs to extend and modify, based on the experiences of working mathematicians in solving mathematical problems. == Controversy == Lenat claimed that the system was composed of hundreds of data structures called "concepts", together with hundreds of "heuristic rules" and a simple flow of control: "AM repeatedly selects the top task from the agenda and tries to carry it out. This is the whole control structure!" Yet the heuristic rules were not always represented as separate data structures; some had to be intertwined with the control flow logic. Some rules had preconditions that depended on the history, or otherwise could not be represented in the framework of the explicit rules. What's more, the published versions of the rules often involve vague terms that are not defined further, such as "If two expressions are structurally similar, ..." (Rule 218) or "... replace the value obtained by some other (very similar) value..." (Rule 129). Another source of information is the user, via Rule 2: "If the user has recently referred to X, then boost the priority of any tasks involving X." Thus, it appears quite possible that much of the real discovery work is buried in unexplained procedures. Lenat claimed that the system had rediscovered both Goldbach's conjecture and the fundamental theorem of arithmetic. Later critics accused Lenat of over-interpreting the output of AM. In his paper Why AM and Eurisko appear to work, Lenat conceded that any system that generated enough short Lisp programs would generate ones that could be interpreted by an external observer as representing equally sophisticated mathematical concepts. However, he argued that this property was in itself interesting—and that a promising direction for further research would be to look for other languages in which short random strings were likely to be useful. == Successor == This intuition was the basis of AM's successor Eurisko, which attempted to generalize the search for mathematical concepts to the search for useful heuristics.
Monkey and banana problem
The monkey and banana problem is a famous toy problem in artificial intelligence, particularly in logic programming and planning. It has been framed as: A monkey is in a room containing a box and a bunch of bananas. The bananas are hanging from the ceiling out of reach of the monkey. How can the monkey obtain the bananas? The situation is used as a toy problem for computer science and can be solved with an expert system such as CLIPS. The example set of rules that CLIPS provides is somewhat fragile, in that, naive changes to the rulebase that might seem to a human of average intelligence to make common sense can cause the engine to fail to get the monkey to reach the banana. Other examples exist using Rules Based System (RBS), including a project implemented in Python.
Conceptual dependency theory
Conceptual dependency theory is a model of natural language understanding used in artificial intelligence systems. Roger Schank at Stanford University introduced the model in 1969, in the early days of artificial intelligence. This model was extensively used by Schank's students at Yale University such as Robert Wilensky, Wendy Lehnert, and Janet Kolodner. Schank developed the model to represent knowledge for natural language input into computers. Partly influenced by the work of Sydney Lamb, his goal was to make the meaning independent of the words used in the input, i.e. two sentences identical in meaning would have a single representation. The system was also intended to draw logical inferences. The model uses the following basic representational tokens: real world objects, each with some attributes. real world actions, each with attributes times locations A set of conceptual transitions then act on this representation, e.g. an ATRANS is used to represent a transfer such as "give" or "take" while a PTRANS is used to act on locations such as "move" or "go". An MTRANS represents mental acts such as "tell", etc. A sentence such as "John gave a book to Mary" is then represented as the action of an ATRANS on two real world objects, John and Mary.
Interim Measures for the Management of Generative AI Services
The Interim Measures for the Management of Generative AI Services (Chinese: 生成式人工智能服务管理暂行办法; pinyin: Shēngchéng shì réngōng zhìnéng fúwù guǎnlǐ zànxíng bànfǎ) are a set of regulations governing public-facing generative artificial intelligence services in China. Issued on 10 July 2023 and effective from 15 August 2023, they were China's first binding regulation specifically targeting generative AI. They have been described as among the earliest such regulations adopted by any country. The measures were jointly issued by the Cyberspace Administration of China (CAC) and six other national bodies: the National Development and Reform Commission, the Ministry of Education, the Ministry of Science and Technology, the Ministry of Industry and Information Technology, the Ministry of Public Security, and the National Radio and Television Administration. Among the measures' most prominent requirements is that generative AI services must uphold Core Socialist Values and must not generate content that could subvert state power, harm national security, or undermine social stability. The measures also require providers of public-facing generative AI services to undergo security assessments and register their algorithms with the CAC. As of December 2025, 748 generative AI services had completed the filing process at the national level. == Background == The Interim Measures build on two earlier sets of regulations targeting specific algorithm applications. The Administrative Provisions on Algorithm Recommendation for Internet Information Services, effective from March 2022, established China's algorithm registry and required providers of recommendation algorithms with "public opinion properties or social mobilization capabilities" to file with the CAC and undergo security assessments. The Administrative Provisions on Deep Synthesis of Internet Information Services, effective from January 2023, extended similar requirements to algorithms used for generating synthetic media such as deepfakes. In April 2023, the CAC released a draft of the generative AI regulation for public comment. The draft included several requirements that attracted attention, including that generated content should "embody Core Socialist Values" and that training data should be "true and accurate". The public consultation period ran until May 2023. The final version, published in July 2023, was substantially revised from the draft. According to an analysis by the Future of Privacy Forum, changes appeared to reflect feedback from industry stakeholders including Baidu, Xiaomi, SenseTime, and others, as well as input from government-affiliated research institutes. The final measures adopted a more permissive tone, with the CAC describing its approach as "inclusive and prudent" (包容审慎) and emphasising "classified and graded" (分类分级) supervision. == Scope == The measures apply to services that use generative AI technology to provide text, images, audio, video, or other content to the public within mainland China (Article 2). They do not apply to organisations that develop or use generative AI internally without offering services to the domestic public, such as industry associations, enterprises, and research institutions. Overseas providers whose services are accessible to users in China are also subject to the measures. == Key provisions == === Content requirements === Article 4 sets out the core content obligations. Providers and users of generative AI services must uphold the Core Socialist Values. The measures prohibit generating content that incites subversion of national sovereignty or the socialist system, endangers national security or the nation's image, incites separatism, promotes terrorism or extremism, promotes ethnic hatred or discrimination, or contains violence, obscenity, or false information prohibited by law. These content prohibitions largely mirror those in Article 12 of the Cybersecurity Law and in prior regulations governing online content. Article 4 also requires that models be designed and trained to avoid discrimination, that services respect intellectual property rights, and that providers take effective measures to improve the transparency and accuracy of generated content. === Training data and labelling === Article 7 requires providers to ensure that training data is of high quality and legitimately sourced, and that it does not infringe upon intellectual property rights. Where personal information is used, consent must be obtained. The final version of this provision removed language from the draft that would have held providers responsible for the "legitimacy" of all pretraining data, replacing it with a requirement to "employ effective measures to improve the quality of training data". Article 8 requires providers to establish labelling rules for training data and to conduct quality assessments of data annotations. Article 12 requires that generated images, videos, and other synthetic content be labelled as AI-generated. === User rights and privacy === Article 11 requires providers to protect user privacy, to minimise the collection and retention of personal data, and to refrain from unlawfully sharing user information. Users have the right to request review, correction, or deletion of their personal information. Article 10 requires providers to take measures to prevent excessive dependence on or addiction to generative AI services by minors. === Security assessment and algorithm filing === Article 17 requires that providers of generative AI services with "public opinion properties or the capacity for social mobilization" (具有舆论属性或者社会动员能力) carry out security assessments and complete algorithm filing procedures in accordance with the Administrative Provisions on Algorithm Recommendation for Internet Information Services. == Implementation == === Algorithm filing process === In practice, the filing requirements under the Interim Measures have developed into a two-tier process. The first tier is the standard algorithm filing (算法备案) under the pre-existing Algorithm Recommendation Provisions, which involves submitting information about an algorithm's design, purpose, and data sources to the CAC. This process is primarily a registration mechanism. For public-facing generative AI products, there is an additional, more rigorous process commonly referred to as the "large model filing" (大模型备案). This involves submitting a security self-assessment report, data annotation rules, a keyword blocking list, and evaluation test question sets. The process includes technical testing at the provincial level, followed by review at the national CAC level. The algorithm filing targets specific algorithms, while the large model filing evaluates the broader system architecture, training data, model parameters, and potential social impact. The CAC publishes lists of generative AI services that have successfully completed the filing process. The first such list was published on 2 April 2024. According to the CAC's year-end announcements, 302 generative AI services had completed national-level filing by the end of 2024 (of which 238 were new that year), alongside 105 applications that completed local-level registration. By the end of 2025, the cumulative total had risen to 748 national-level filings and 435 local-level registrations. === Content compliance and testing === According to the Carnegie Endowment, the CAC has conducted compliance audits of generative AI services with a particular focus on ensuring appropriate responses to queries about politically sensitive topics. The large model filing process requires providers to pass both provincial-level and national-level technical testing before their services can be made available to the public. On 1 March 2024, the National Technical Committee 260 on Cybersecurity (TC260) published TC260-003, the Basic Security Requirements for Generative AI Services (生成式人工智能服务安全基本要求), a technical standard that provides detailed guidance on the security assessments required under the Interim Measures. The standard covers requirements for training data safety, model security, and content safety evaluation, and is used as a reference for the filing process. == Analysis == === Relationship to broader Chinese internet regulation === The content requirements in the Interim Measures extend China's existing framework for online information control to generative AI. Legal scholars have noted that the "Core Socialist Values" provision and the specific content prohibitions are consistent with longstanding requirements imposed on internet platforms under the Cybersecurity Law and related regulations. The Asia Society Policy Institute has described the Chinese government's highest regulatory priority in this area as retaining control of information, noting that content-related obligations receive stricter enforcement than other provisions. === Nature of the filing system === The character of the filing system has been debated by scholars. Angela Huyue Zh
Gollum browser
Gollum browser is a discontinued web browser for accessing Wikipedia. Since 2017, Gollum is no longer accessible online. Gollum is designed to browse Wikipedia in an easier way than directly using the web browser. Links external to Wikipedia are opened in the user's regular browser. Gollum is opened from a regular browser and makes a window that puts the Wikipedia search bar on the toolbar. Gollum was created by Harald Hanek in 2005 using PHP and Ajax. According to one blogger, Gollum provides a way to bypass censorship of Wikipedia in China. == Languages == Though the website is available only in English and German, Gollum's GUI is available in more than 32 languages and can browse nearly 50 Wikipedia editions. === Gollum's GUI === === Browsable Wikipedia editions ===
KitKat (cat)
KitKat was a bodega cat from the Mission District of San Francisco who was killed by a Waymo car on October 27, 2025. Locals built altars and the death has raised comments about the safety of self-driving cars. == Life == Mike Zeidan, the owner of Randa's Market, adopted KitKat as a stray to help keep rodents out of his store. KitKat lived in Randa's Market for six years and was well-loved by the neighborhood, including an appearance on a shop cats map that went viral in 2022 as a "particularly friendly cat". After KitKat arrived at the bodega, customers were said to come more often, and regularly brought the cat food and gifts. == Death == At around 11:40 pm on October 27, 2025, witnesses saw KitKat sitting in front of a stopped Waymo car for seven seconds. He walked under the car as the car pulled out, and the right rear tire ran over the back half of his body. A bartender who was taking a cigarette break used a sandwich board sign as a stretcher and took KitKat to an emergency animal clinic. An hour later, KitKat was pronounced dead. Waymo confirmed that the cat was killed by one of its vehicles on October 30. Surveillance footage of the incident was released in December. From Waymo's report to the National Highway Traffic Safety Administration (NHTSA): The Waymo AV was stopped next to the curb for a passenger pickup facing east on 16th Street. As the passengers were boarding the Waymo AV, a cat approached the Waymo AV from the southern sidewalk of 16th Street and sat in the roadway partially under the front right corner of the Waymo AV. A pedestrian approached the Waymo AV from the east on the southern sidewalk of 16th Street and began crouching near the front of the Waymo AV, stepping partially into the roadway, appearing to reach for the cat. As they did so, the cat moved farther from the sidewalk under the Waymo AV and the pedestrian stepped back onto the sidewalk. The Waymo AV then departed the pickup location and the rear right tire made contact with the cat. At the time of impact, the Waymo AV's Level 4 ADS was engaged in autonomous mode. Waymo later received notice that the cat did not survive. The passengers in the Waymo AV did not have seatbelts fastened at the time, having just boarded the Waymo AV. Prior to KitKat's death, the NHTSA had logged 14 collisions between Waymo cars and animals, of which 5 were confirmed fatalities. == Aftermath == After KitKat's death, an altar was created outside Randa's Market. People left flowers, candles, cat food, written notes, and Kit Kat candy bars in the cat's honor. A city worker took down the memorial for fire safety reasons, but neighbors built it again. Local supervisor Jackie Fielder held a rally called "Justice for KitKat" in support of a non-binding San Francisco resolution to shift decision-making about the operation of self-driving cars from the state to individual counties. Critics say that the resolution is performative because it is non-binding, that local control would make autonomous vehicle operation impractical, and that Waymo is still far less dangerous to animals than human drivers. Elon Musk commented that "many pets will be saved by autonomy". There are multiple meme coins inspired by KitKat.