AI And Analytics

AI And Analytics — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Cache language model

A cache language model is a type of statistical language model. These occur in the natural language processing subfield of computer science and assign probabilities to given sequences of words by means of a probability distribution. Statistical language models are key components of speech recognition systems and of many machine translation systems: they tell such systems which possible output word sequences are probable and which are improbable. The particular characteristic of a cache language model is that it contains a cache component and assigns relatively high probabilities to words or word sequences that occur elsewhere in a given text. The primary, but by no means sole, use of cache language models is in speech recognition systems. To understand why it is a good idea for a statistical language model to contain a cache component one might consider someone who is dictating a letter about elephants to a speech recognition system. Standard (non-cache) N-gram language models will assign a very low probability to the word "elephant" because it is a very rare word in English. If the speech recognition system does not contain a cache component, the person dictating the letter may be annoyed: each time the word "elephant" is spoken another sequence of words with a higher probability according to the N-gram language model may be recognized (e.g., "tell a plan"). These erroneous sequences will have to be deleted manually and replaced in the text by "elephant" each time "elephant" is spoken. If the system has a cache language model, "elephant" will still probably be misrecognized the first time it is spoken and will have to be entered into the text manually; however, from this point on the system is aware that "elephant" is likely to occur again – the estimated probability of occurrence of "elephant" has been increased, making it more likely that if it is spoken it will be recognized correctly. Once "elephant" has occurred several times, the system is likely to recognize it correctly every time it is spoken until the letter has been completely dictated. This increase in the probability assigned to the occurrence of "elephant" is an example of a consequence of machine learning and more specifically of pattern recognition. There exist variants of the cache language model in which not only single words but also multi-word sequences that have occurred previously are assigned higher probabilities (e.g., if "San Francisco" occurred near the beginning of the text subsequent instances of it would be assigned a higher probability). The cache language model was first proposed in a paper published in 1990, after which the IBM speech-recognition group experimented with the concept. The group found that implementation of a form of cache language model yielded a 24% drop in word-error rates once the first few hundred words of a document had been dictated. A detailed survey of language modeling techniques concluded that the cache language model was one of the few new language modeling techniques that yielded improvements over the standard N-gram approach: "Our caching results show that caching is by far the most useful technique for perplexity reduction at small and medium training data sizes". The development of the cache language model has generated considerable interest among those concerned with computational linguistics in general and statistical natural language processing in particular: recently, there has been interest in applying the cache language model in the field of statistical machine translation. The success of the cache language model in improving word prediction rests on the human tendency to use words in a "bursty" fashion: when one is discussing a certain topic in a certain context, the frequency with which one uses certain words will be quite different from their frequencies when one is discussing other topics in other contexts. The traditional N-gram language models, which rely entirely on information from a very small number (four, three, or two) of words preceding the word to which a probability is to be assigned, do not adequately model this "burstiness". Recently, the cache language model concept – originally conceived for the N-gram statistical language model paradigm – has been adapted for use in the neural paradigm. For instance, recent work on continuous cache language models in the recurrent neural network (RNN) setting has applied the cache concept to much larger contexts than before, yielding significant reductions in perplexity. Another recent line of research involves incorporating a cache component in a feed-forward neural language model (FN-LM) to achieve rapid domain adaptation.
Read more →
Color clock

The color clock, or color timer, is a part of the video circuitry of computer graphics hardware that works with analog color television systems. The clock is timed to match the timing of the color standard it works with, typically NTSC or PAL, ensuring that the data being read from the computer memory to create the image on-screen is in sync with the display. Depending on the speed of the color clock, the product of the resolution and number of colors is defined. Slow color clocks of many early games consoles and home computers resulted in limited color palettes at the highest resolutions.
Read more →
Radioplayer

Radioplayer is a radio technology platform, owned by UK radio broadcasters and operated under licence in some other countries. It operates an internet radio web tuner, a set of mobile phone apps, an in-car adaptor, and a growing range of integrations with other connected devices and platforms. Radioplayer is operated by UK Radioplayer Ltd which is a not-for-profit organisation owned by UK radio broadcasters. Initial shareholders were the BBC, Global Radio, GMG Radio, Absolute Radio and RadioCentre. After consolidation in the radio market, current shareholders are the BBC, Global Radio, Bauer Media Group and RadioCentre. == History == Launched in the UK on 31 March 2011, Radioplayer set out to offer a simple and accessible way to listen to radio via the internet. It contained 157 stations at launch. Initially working internally at the BBC for Tim Davie, then Director of BBC Audio & Music, Michael Hill led the project since March 2009; he was made Managing Director of UK Radioplayer Ltd on 28 July 2010. At launch, Radioplayer was a simple and straightforward Flash-based radio player, linked-to by radio stations on their own website. The player included searching and bookmarking across all of UK radio station content. On 5 October 2012, Radioplayer launched a mobile app on iOS phones with an Android version following shortly afterwards. The apps are unavailable for download outside the United Kingdom. This was followed by a tablet app on 25 September 2013. The apps also support Android Wear, Android Auto, Smart Device Link, Apple Watch and Apple CarPlay. They are also compatible with Chromecast and Airplay. In September 2016, Radioplayer announced it had been chosen by Amazon to integrate with their new voice-controlled 'Echo' device, ahead of its UK launch. In July 2017, Radioplayer integrated with the Sonos and Bose multi-room speaker platforms. UK Radioplayer currently contains around 500 UK stations, from Ofcom-licensed broadcasters. Online-only 'sister-stations' can also be added, but only by broadcasters with Ofcom licences which have been on the platform for over a year. == Radioplayer Car == Radioplayer Car was announced in September 2014 as a hybrid radio receiver that switches between FM, DAB and streaming to find the strongest signal. Speaking in Oslo in June 2015, Michael Hill said that he hoped to launch the product in the UK and Norway during the summer of 2015. In February 2017, Radioplayer Car was launched. It was marketed as the world’s first voice-controlled hybrid radio adaptor for car stereos. A small box, fitted behind the dashboard, links to the auxiliary input on an existing car radio. It connects wirelessly via Bluetooth to the driver’s smartphone by an app. The adaptor enabled drivers to listen to their own smartphone music collections using Bluetooth, take hands-free calls, listen to inbound text messages and receive instant audio travel news, customised by GPS to their location and direction of travel. The hardware was manufactured under licence by car audio interfaces supplier Connects2, and Hyde Park Corner was promoted as the preferred installer of the audio equipment. There were several spin-off benefits of the Radioplayer Car project, including the creation of the hybrid radio metadata API for cars, known as the 'WRAPI' (Worldwide Radioplayer API). == International == Through a separate company called Radioplayer Worldwide, Radioplayer technology is licensed to a number of different territories.
Read more →
Tandem (app)

Tandem is a mobile language exchange and language learning app. == History == Tandem was founded in Hannover, Germany in 2014 by Arnd Aschentrup, Tobias Dickmeis, and Matthias Kleimann. Prior to founding Tandem, the trio had launched Vive, a members-only mobile video chat platform. Tandem has been criticised for not accepting members into the community immediately, as opposed to competitors including HelloTalk, Speaky or Cafehub. In some countries, there is a waiting list and applicants can wait up to seven days for their application to be processed by human moderators. In 2015, Tandem completed its first funding round (seed funding) of €600,000. Participating investors included business angels such as Atlantic Labs (Christophe Maire), Hannover Beteiligungsfonds, Marcus Englert (Chairman of the Supervisory Board of Rocket Internet SE ), Catagonia, Ludwig zu Salm, Florian Langenscheidt, Heiko Hubertz, Martin Sinner, and Zehden Enterprises. In 2016, the company received a further €2 million from new investors Rubylight and Faber Ventures, as well as from existing investors Hannover Beteiligungsfonds, Atlantic Labs, and Zehden Enterprises. Since 2018, the premium membership Tandem Pro has been available, which offers members unlimited access to all language learning features of the app as well as the removal of advertising for a monthly fee.
Read more →
List of chatbots

A chatbot is a software application or web interface that is designed to mimic human conversation through text or voice interactions. Modern chatbots are typically online and use generative artificial intelligence systems that are capable of maintaining a conversation with a user in natural language and simulating the way a human would behave as a conversational partner. Such chatbots often use large language models (LLMs) and natural language processing, but simpler chatbots have existed for decades. == LLM chatbots == == General chatbots == == Historical chatbots ==
Read more →
Texture compression

Texture compression is a specialized form of image compression designed for storing texture maps in 3D computer graphics rendering systems. Unlike conventional image compression algorithms, texture compression algorithms are optimized for random access. Texture compression can be applied to reduce memory usage at runtime. Texture data is often the largest source of memory usage in a mobile application. == Tradeoffs == In their seminal paper on texture compression, Beers, Agrawala and Chaddha list four features that tend to differentiate texture compression from other image compression techniques. These features are: Decoding Speed It is highly desirable to be able to render directly from the compressed texture data and so, in order not to impact rendering performance, decompression must be fast. Random Access Since predicting the order that a renderer accesses texels would be difficult, any texture compression scheme must allow fast random access to decompressed texture data. This tends to rule out many better-known image compression schemes such as JPEG or run-length encoding. Compression Rate and Visual Quality In a rendering system, lossy compression can be more tolerable than for other use cases. Some texture compression libraries, such as crunch, allow the developer to flexibly trade off compression rate vs. visual quality, using methods such as rate–distortion optimization (RDO). Encoding Speed Texture compression is more tolerant of asymmetric encoding/decoding rates as the encoding process is often done only once during the application authoring process. Given the above, most texture compression algorithms involve some form of fixed-rate lossy vector quantization of small fixed-size blocks of pixels into small fixed-size blocks of coding bits, sometimes with additional extra pre-processing and post-processing steps. Block Truncation Coding is a very simple example of this family of algorithms. Because their data access patterns are well-defined, texture decompression may be executed on-the-fly during rendering as part of the overall graphics pipeline, reducing overall bandwidth and storage needs throughout the graphics system. As well as texture maps, texture compression may also be used to encode other kinds of rendering map, including bump maps and surface normal maps. Texture compression may also be used together with other forms of map processing such as mipmaps and anisotropic filtering. == Availability == Some examples of practical texture compression systems are S3 Texture Compression (S3TC), PVRTC, Ericsson Texture Compression (ETC) and Adaptive Scalable Texture Compression (ASTC); these may be supported by special function units in modern graphics processing units (GPUs). OpenGL and OpenGL ES, as implemented on many video accelerator cards and mobile GPUs, can support multiple common kinds of texture compression - generally through the use of vendor extensions. == Supercompression == A compressed-texture can be further compressed in what is called "supercompression". Fixed-rate texture compression formats are optimized for random access and are much less efficient compared to image formats such as PNG. By adding further compression, a programmer can reduce the efficiency gap. The extra layer can be decompressed by the CPU so that the GPU receives a normal compressed texture, or in newer methods, decompressed by the GPU itself. Supercompression saves the same amount of VRAM as regular texture compression, but saves more disk space and download size. == Neural Texture Compression == Random-Access Neural Compression of Material Textures (Neural Texture Compression) is a Nvidia's technology which enables two additional levels of detail (16× more texels, so four times higher resolution) while maintaining similar storage requirements as traditional texture compression methods. The key idea is compressing multiple material textures and their mipmap chains together, and using a small neural network, that is optimized for each material, to decompress them.
Read more →
T-vertices

T-vertices is a term used in computer graphics to describe a problem that can occur during mesh refinement or mesh simplification. The most common case occurs in naive implementations of continuous level of detail, where a finer-level mesh is "sewn" together with a coarser-level mesh by simply aligning the finer vertices on the edges of the coarse polygons. The result is a continuous mesh, however due to the nature of the z-buffer and certain lighting algorithms such as Gouraud shading, visual artifacts can often be detected. Some modeling algorithms such as subdivision surfaces will fail when a model contains T-vertices.
Read more →
MovieRide FX

MovieRide FX is a patented automated special visual effects video compositing engine used in the MovieRide FX mobile application for Android (requires Android 2.3 or later) and iOS (compatible with iPhone 4 and up, iPad, and iPod Touch (new generation), requires iOS 7 or later). MovieRide FX allows the user to personalize a "Hollywood-style" movie clip by inserting themself into the clip as the "actor". == Features == The MovieRide FX app uses the relevant mobile device's camera to record a video of the user and insert it into a pre-packaged "Hollywood style" movie clip. The "actor" is extracted from their recorded video clip through various known effects such as masking, keying, and motion tracking. The "actor" is then inserted into one of the pre-packaged movie clips created by the MovieRide FX visual effects artists. This is done through an automated process requiring little or no artistic or technical skill from the user. The custom movie clips pre-packaged with MovieRide FX offer the user a variety of movie scenarios. Additional clips based on popular television and movie themes are continually being developed and are available on a freemium basis. == Sharing == Once the user's footage has automatically been composited into a movie clip and rendered as an .mp4 file, it can be shared via social media, such as Facebook, YouTube, and Twitter, and by e-mail. == History == === 2012 === MovieRide FX was created by Grant Waterston and Johann Mynhardt, who started development in 2012. === 2013 === The beta version was released on Google Play in July 2013. In August 2013 MovieRide FX was a New Media Award winner in the "New Media" category of the Accolade International Awards in Los Angeles. In October 2013 MovieRide FX was awarded exhibitor space in the ‘start-up village’ at the Apps-World Expo in London. === 2014 === MovieRide FX reached the 100 000 – 500 000 downloads category on the Google Play Store in June 2014. The official Android version was launched in July 2014. iOS version released in August 2014. MovieRide FX was selected as one of the "Top 150" startups at the Pioneer Festival in Vienna in September 2014. In November 2014 MovieRide FX was shortlisted for the Appster Awards in the "Best Entertainment App" and "Most Innovative App" categories and was awarded exhibitor space at the ‘start-up village’ at the Apps-World Expo in London. Patent applications were filed in South Africa, the EU and USA in April 2014. === 2015 === In September 2015 MovieRide FX was shortlisted for "Best Software innovation" at The Technology Expo Awards in London. === 2016 === In April 2016 MovieRide FX was nominated for a National Science and Technology Forum (NSTF) award for 'Research leading to Innovation by a corporate organization' In August 2016 Movie Ride FX won two Gold Awards at the 2016 Mobile Marketing Awards (MMA Smarties SA). These two Gold awards were for the 'Innovation' and 'Best in Show’ categories. In December 2016 FlicJam Inc. was formed in the US to access the larger global market. EU patent application was published in March 2016. === 2017 === South African patent was granted in February 2017. === 2018 === US patent was granted in March 2018.
Read more →
Actor-critic algorithm

The actor-critic algorithm (AC) is a family of reinforcement learning (RL) algorithms that combine policy-based RL algorithms such as policy gradient methods, and value-based RL algorithms such as value iteration, Q-learning, SARSA, and TD learning. An AC algorithm consists of two main components: an "actor" that determines which actions to take according to a policy function, and a "critic" that evaluates those actions according to a value function. Some AC algorithms are on-policy, some are off-policy. Some apply to either continuous or discrete action spaces. Some work in both cases. == Overview == The actor-critic methods can be understood as an improvement over pure policy gradient methods like REINFORCE via introducing a baseline. === Actor === The actor uses a policy function π ( a | s ) {\displaystyle \pi (a|s)} , while the critic estimates either the value function V ( s ) {\displaystyle V(s)} , the action-value Q-function Q ( s , a ) , {\displaystyle Q(s,a),} the advantage function A ( s , a ) {\displaystyle A(s,a)} , or any combination thereof. The actor is a parameterized function π θ {\displaystyle \pi _{\theta }} , where θ {\displaystyle \theta } are the parameters of the actor. The actor takes as argument the state of the environment s {\displaystyle s} and produces a probability distribution π θ ( ⋅ | s ) {\displaystyle \pi _{\theta }(\cdot |s)} . If the action space is discrete, then ∑ a π θ ( a | s ) = 1 {\displaystyle \sum _{a}\pi _{\theta }(a|s)=1} . If the action space is continuous, then ∫ a π θ ( a | s ) d a = 1 {\displaystyle \int _{a}\pi _{\theta }(a|s)da=1} . The goal of policy optimization is to improve the actor. That is, to find some θ {\displaystyle \theta } that maximizes the expected episodic reward J ( θ ) {\displaystyle J(\theta )} : J ( θ ) = E π θ [ ∑ t = 0 T γ t r t ] {\displaystyle J(\theta )=\mathbb {E} _{\pi _{\theta }}\left[\sum _{t=0}^{T}\gamma ^{t}r_{t}\right]} where γ {\displaystyle \gamma } is the discount factor, r t {\displaystyle r_{t}} is the reward at step t {\displaystyle t} , and T {\displaystyle T} is the time-horizon (which can be infinite). The goal of policy gradient method is to optimize J ( θ ) {\displaystyle J(\theta )} by gradient ascent on the policy gradient ∇ J ( θ ) {\displaystyle \nabla J(\theta )} . As detailed on the policy gradient method page, there are many unbiased estimators of the policy gradient: ∇ θ J ( θ ) = E π θ [ ∑ 0 ≤ j ≤ T ∇ θ ln ⁡ π θ ( A j | S j ) ⋅ Ψ j | S 0 = s 0 ] {\displaystyle \nabla _{\theta }J(\theta )=\mathbb {E} _{\pi _{\theta }}\left[\sum _{0\leq j\leq T}\nabla _{\theta }\ln \pi _{\theta }(A_{j}|S_{j})\cdot \Psi _{j}{\Big |}S_{0}=s_{0}\right]} where Ψ j {\textstyle \Psi _{j}} is a linear sum of the following: ∑ 0 ≤ i ≤ T ( γ i R i ) {\textstyle \sum _{0\leq i\leq T}(\gamma ^{i}R_{i})} . γ j ∑ j ≤ i ≤ T ( γ i − j R i ) {\textstyle \gamma ^{j}\sum _{j\leq i\leq T}(\gamma ^{i-j}R_{i})} : the REINFORCE algorithm. γ j ∑ j ≤ i ≤ T ( γ i − j R i ) − b ( S j ) {\textstyle \gamma ^{j}\sum _{j\leq i\leq T}(\gamma ^{i-j}R_{i})-b(S_{j})} : the REINFORCE with baseline algorithm. Here b {\displaystyle b} is an arbitrary function. γ j ( R j + γ V π θ ( S j + 1 ) − V π θ ( S j ) ) {\textstyle \gamma ^{j}\left(R_{j}+\gamma V^{\pi _{\theta }}(S_{j+1})-V^{\pi _{\theta }}(S_{j})\right)} : TD(1) learning. γ j Q π θ ( S j , A j ) {\textstyle \gamma ^{j}Q^{\pi _{\theta }}(S_{j},A_{j})} . γ j A π θ ( S j , A j ) {\textstyle \gamma ^{j}A^{\pi _{\theta }}(S_{j},A_{j})} : Advantage Actor-Critic (A2C). γ j ( R j + γ R j + 1 + γ 2 V π θ ( S j + 2 ) − V π θ ( S j ) ) {\textstyle \gamma ^{j}\left(R_{j}+\gamma R_{j+1}+\gamma ^{2}V^{\pi _{\theta }}(S_{j+2})-V^{\pi _{\theta }}(S_{j})\right)} : TD(2) learning. γ j ( ∑ k = 0 n − 1 γ k R j + k + γ n V π θ ( S j + n ) − V π θ ( S j ) ) {\textstyle \gamma ^{j}\left(\sum _{k=0}^{n-1}\gamma ^{k}R_{j+k}+\gamma ^{n}V^{\pi _{\theta }}(S_{j+n})-V^{\pi _{\theta }}(S_{j})\right)} : TD(n) learning. γ j ∑ n = 1 ∞ λ n − 1 1 − λ ⋅ ( ∑ k = 0 n − 1 γ k R j + k + γ n V π θ ( S j + n ) − V π θ ( S j ) ) {\textstyle \gamma ^{j}\sum _{n=1}^{\infty }{\frac {\lambda ^{n-1}}{1-\lambda }}\cdot \left(\sum _{k=0}^{n-1}\gamma ^{k}R_{j+k}+\gamma ^{n}V^{\pi _{\theta }}(S_{j+n})-V^{\pi _{\theta }}(S_{j})\right)} : TD(λ) learning, also known as GAE (generalized advantage estimate). This is obtained by an exponentially decaying sum of the TD(n) learning terms. === Critic === In the unbiased estimators given above, certain functions such as V π θ , Q π θ , A π θ {\displaystyle V^{\pi _{\theta }},Q^{\pi _{\theta }},A^{\pi _{\theta }}} appear. These are approximated by the critic. Since these functions all depend on the actor, the critic must learn alongside the actor. The critic is learned by value-based RL algorithms. For example, if the critic is estimating the state-value function V π θ ( s ) {\displaystyle V^{\pi _{\theta }}(s)} , then it can be learned by any value function approximation method. Let the critic be a function approximator V ϕ ( s ) {\displaystyle V_{\phi }(s)} with parameters ϕ {\displaystyle \phi } . The simplest example is TD(1) learning, which trains the critic to minimize the TD(1) error: δ i = R i + γ V ϕ ( S i + 1 ) − V ϕ ( S i ) {\displaystyle \delta _{i}=R_{i}+\gamma V_{\phi }(S_{i+1})-V_{\phi }(S_{i})} The critic parameters are updated by gradient descent on the squared TD error: ϕ ← ϕ − α ∇ ϕ ( δ i ) 2 = ϕ + α δ i ∇ ϕ V ϕ ( S i ) {\displaystyle \phi \leftarrow \phi -\alpha \nabla _{\phi }(\delta _{i})^{2}=\phi +\alpha \delta _{i}\nabla _{\phi }V_{\phi }(S_{i})} where α {\displaystyle \alpha } is the learning rate. Note that the gradient is taken with respect to the ϕ {\displaystyle \phi } in V ϕ ( S i ) {\displaystyle V_{\phi }(S_{i})} only, since the ϕ {\displaystyle \phi } in γ V ϕ ( S i + 1 ) {\displaystyle \gamma V_{\phi }(S_{i+1})} constitutes a moving target, and the gradient is not taken with respect to that. This is a common source of error in implementations that use automatic differentiation, and requires "stopping the gradient" at that point. Similarly, if the critic is estimating the action-value function Q π θ {\displaystyle Q^{\pi _{\theta }}} , then it can be learned by Q-learning or SARSA. In SARSA, the critic maintains an estimate of the Q-function, parameterized by ϕ {\displaystyle \phi } , denoted as Q ϕ ( s , a ) {\displaystyle Q_{\phi }(s,a)} . The temporal difference error is then calculated as δ i = R i + γ Q θ ( S i + 1 , A i + 1 ) − Q θ ( S i , A i ) {\displaystyle \delta _{i}=R_{i}+\gamma Q_{\theta }(S_{i+1},A_{i+1})-Q_{\theta }(S_{i},A_{i})} . The critic is then updated by θ ← θ + α δ i ∇ θ Q θ ( S i , A i ) {\displaystyle \theta \leftarrow \theta +\alpha \delta _{i}\nabla _{\theta }Q_{\theta }(S_{i},A_{i})} The advantage critic can be trained by training both a Q-function Q ϕ ( s , a ) {\displaystyle Q_{\phi }(s,a)} and a state-value function V ϕ ( s ) {\displaystyle V_{\phi }(s)} , then let A ϕ ( s , a ) = Q ϕ ( s , a ) − V ϕ ( s ) {\displaystyle A_{\phi }(s,a)=Q_{\phi }(s,a)-V_{\phi }(s)} . Although, it is more common to train just a state-value function V ϕ ( s ) {\displaystyle V_{\phi }(s)} , then estimate the advantage by A ϕ ( S i , A i ) ≈ ∑ j ∈ 0 : n − 1 γ j R i + j + γ n V ϕ ( S i + n ) − V ϕ ( S i ) {\displaystyle A_{\phi }(S_{i},A_{i})\approx \sum _{j\in 0:n-1}\gamma ^{j}R_{i+j}+\gamma ^{n}V_{\phi }(S_{i+n})-V_{\phi }(S_{i})} Here, n {\displaystyle n} is a positive integer. The higher n {\displaystyle n} is, the more lower is the bias in the advantage estimation, but at the price of higher variance. The Generalized Advantage Estimation (GAE) introduces a hyperparameter λ {\displaystyle \lambda } that smoothly interpolates between Monte Carlo returns ( λ = 1 {\displaystyle \lambda =1} , high variance, no bias) and 1-step TD learning ( λ = 0 {\displaystyle \lambda =0} , low variance, high bias). This hyperparameter can be adjusted to pick the optimal bias-variance trade-off in advantage estimation. It uses an exponentially decaying average of n-step returns with λ {\displaystyle \lambda } being the decay strength. == Variants == Asynchronous Advantage Actor-Critic (A3C): Parallel and asynchronous version of A2C. Soft Actor-Critic (SAC): Incorporates entropy maximization for improved exploration. Deep Deterministic Policy Gradient (DDPG): Specialized for continuous action spaces.
Read more →
Synonym (database)

In databases, a synonym is an alias or alternate name for a table, view, sequence, or other schema object. They are used mainly to make it intuitive for users to access database objects owned by other users. They also hide the underlying object's identity and make it harder for a malicious program or user to target the underlying object (security through obscurity). Because a synonym is just an alternate name for an object, it requires no storage other than its definition. When an application uses a synonym, the DBMS forwards the request to the synonym's underlying base object. By coding your programs to use synonyms instead of database object names, you insulate yourself from any changes in the name, ownership, or object locations, at the cost of adding another layer that also needs to be maintained. Users can also have different needs, for example some may wish to use a shorter name to refer to database objects they often query, which can be done with aliases without having to rename the underlying object and alter the code referring to it. Synonyms are very powerful from the point of view of allowing users access to objects that do not lie within their schema. All synonyms have to be created explicitly with the CREATE SYNONYM command and the underlying objects can be located in the same database or in other databases that are connected by database links There are two major uses of synonyms: Object invisibility: Synonyms can be created to keep the original object hidden from the user. Location invisibility: Synonyms can be created as aliases for tables and other objects that are not part of the local database. When a table or a procedure is created, it is created in a particular schema, and other users can access it only by using that schema's name as a prefix to the object's name. The way around for this is for the schema owner creates a synonym with the same name as the table name. == Public synonyms == Public synonyms are owned by special schema in the Oracle Database called PUBLIC. As mentioned earlier, public synonyms can be referenced by all users in the database. Public synonyms are usually created by the application owner for the tables and other objects such as procedures and packages so the users of the application can see the objects The following code shows how to create a public synonym for the employee table: Now any user can see the table by just typing the original table name. If you wish, you could provide a different table name for that table in the CREATE SYNONYM statement. Remember that the DBA must create public synonyms. Just because you can see a table through public (or private) synonym doesn’t mean that you can also perform SELECT, INSERT, UPDATE or DELETE operations on the table. To be able to perform those operations, a user needs specific privileges for the underlying object, either directly or through roles from the application owner. == Private synonyms == A private synonym is a synonym within a database schema that a developer typically uses to mask the true name of a table, view stored procedure, or other database object in an application schema. Private synonyms, unlike public synonyms, can be referenced only by the schema that owns the table or object. You may want to create private synonyms when you want to refer to the same table by different contexts. Private synonym overrides public synonym definitions. You create private synonyms the same way you create public synonyms, but you omit the PUBLIC keyword in the CREATE statement. The following example shows how to create a private synonym called addresses for the locations table. Note that once you create the private synonym, you can refer to the synonym exactly as you would the original table name. == Drop a synonym == Synonyms, both private and public, are dropped in the same manner by using the DROP SYNONYM command, but there is one important difference. If you are dropping a public synonym; you need to add the keyword PUBLIC after the keyword DROP. The ALL_SYNONYMS (or DBA_SYNONYMS) view provides information on all synonyms in your database.
Read more →
Terminology model

A terminology model is a refinement of a concept system. Within a terminology model the concepts (object types) of a specific problem or subject area are defined by subject-matter experts in terms of concept (object type) definitions and definitions of subordinated concepts or characteristics (properties). Besides object types, the terminology model allows defining hierarchical classifications, definitions for object type and property behavior and definition of casual relations. The terminology model is a means for subject-matter experts to express their knowledge about the subject in subject-specific terms. Since the terminology model is structured rather similar to an object-oriented database schema, is can be transformed without loss of information into an object-oriented database schema. Thus, the terminology model is a method for problem analysis on the one side and a mean of defining database schema on the other side. Several terminology models have been developed and published in the field of statistics: Terminology model for classifications Terminology model for statistical variables Reference model for statistical metadata
Read more →
DataViva

DataViva is an information visualization engine created by the Strategic Priorities Office of the government of Minas Gerais. DataViva makes official data about exports, industries, locations and occupations available for the entirety of Brazil through eight apps and more than 100 million possible visualizations. The first set of datum – also available at ALICEWEB – is provided by MDIC (Ministry of Development, Industry and Foreign Trade) / SECEX (Secretariat of Foreign Trade), an official institution of the Government of Brazil and shows foreign trade statistics for all exporting municipalities in the country. The other database, provided by Ministério do Trabalho e Emprego (MTE – Ministry of Labor and Employment), shows information about all the industries and occupations in Brazil (RAIS – Annual Social Information Report). The platform consists of eight core applications, each of which allows different ways of visualizing the data available. Some applications are descriptive, that is, showing data aggregated at various levels in a simple and comparative way, such as Treemapping. Others are prescriptive, using calculations that allow an analytic visualization of the data, based on theories such as the Product Space. All the applications are generated using D3plus, an open source JavaScript library built on top of D3.js by Alexander Simoes and Dave Landry. Inspired by The Observatory of Economic Complexity, DataViva is an open data, open-source, and free to use tool. It was developed in a partnership with Datawheel, co-founded by MIT Media Lab Professor César Hidalgo, and is maintained by the Government of Minas Gerais.
Read more →
International Speech Communication Association

The International Speech Communication Association (ISCA) is a non-profit organization and one of the two main professional associations for speech communication science and technology, the other association being the IEEE Signal Processing Society. == Purpose == The purpose of the International Speech Communication Association (ISCA) is to promote the study and application of automatic speech processing, including speech recognition and synthesis, as well as related areas such as speaker recognition and speech compression. The association's activities cover all aspects of speech processing, including computational, linguistic, and theoretical aspects. The primary goal of the International Speech Communication Association (ISCA) is to advance the field of automatic speech processing and communication technology through research, education, and collaboration. By promoting the study and application of speech technologies such as speech recognition, speech synthesis, speaker recognition, and speech compression, ISCA aims to foster innovation and development in the areas of human-computer interaction, telecommunications, and multimedia applications. ISCA serves as a platform for researchers, academics, industry professionals, and students to exchange knowledge, share best practices, and foster interdisciplinary dialogue in the field of speech communication science. Through conferences, workshops, publications, and educational initiatives, ISCA seeks to enhance the understanding of speech processing mechanisms, improve the accuracy and efficiency of speech technologies, and explore new frontiers in the realm of human language communication. Furthermore, ISCA plays a crucial role in promoting international collaboration and networking among professionals in the speech communication community. By facilitating partnerships and cooperation between individuals and organizations worldwide, ISCA seeks to drive global progress in speech technology research and application, ultimately contributing to the advancement of communication systems, accessibility tools, and interactive interfaces that benefit society as a whole. == Conferences == ISCA organizes yearly the Interspeech conference. Most recent Interspeech: 2013 Lyon, France 2014 Singapore 2015 Dresden, Germany 2016 San Francisco, US 2017 Stockholm, Sweden 2018 Hyderabad, India 2019 Graz, Austria 2020 Shanghai, China (fully virtual) 2021 Brno, Czechia (hybrid) 2022 Incheon, South Korea 2023 Dublin, Ireland 2023 Kos Island, Greece Forthcoming Interspeech: 2025 Rotterdam, the Netherlands == ISCA board == The ISCA president for 2023-2025 is Odette Scharenborg. The vice president is Bhuvana Ramabhadran and the other members are professionals in the field. == History of ISCA == The precursor to Interspeech was a conference called Eurospeech, first held in 1989 and organised by Jean-Pierre Tubach. It was the conference of the European Speech Communication Association (ESCA), itself the precursor of the International Speech Communication Association (ISCA). A year later another conference on speech science and technology was started: the International Conference on Spoken Language Processing (ICSLP), which was founded in 1990 by Hiroya Fujisaki. The first ISCA (vs. ESCA) event was the merging of Eurospeech and ICSLP to create ICSLP-Interspeech, held in Beijing, China in 2000. This was followed by Eurospeech-Interspeech, which was held in Aalborg, Denmark in 2001. In 2007, the Eurospeech and ICSLP parts of the conference names were dropped and Interspeech became the name of the yearly conference (first Interspeech location: Antwerp, Belgium).
Read more →
Security type system

In computer science, a type system can be described as a syntactic framework which contains a set of rules that are used to assign a type property (int, boolean, char etc.) to various components of a computer program, such as variables or functions. A security type system works in a similar way, only with a main focus on the security of the computer program, through information flow control. Thus, the various components of the program are assigned security types, or labels. The aim of a such system is to ultimately be able to verify that a given program conforms to the type system rules and satisfies non-interference. Security type systems is one of many security techniques used in the field of language-based security, and is tightly connected to information flow and information flow policies. In simple terms, a security type system can be used to detect if there exists any kind of violation of confidentiality or integrity in a program, i.e. the programmer wants to detect if the program is in line with the information flow policy or not. == A simple information flow policy == Suppose there are two users, A and B. In a program, the following security classes (SC) are introduced: SC = {∅, {A}, {B}, {A,B}}, where ∅ is the empty set. The information flow policy should define the direction that information is allowed to flow, which is dependent on whether the policy allows read or write operations. This example considers read operations (confidentiality). The following flows are allowed: → = {({A}, {A}), ({B}, {B}), ({A,B}, {A,B}), ({A,B}, {A}), ({A,B}, {B}), ({A}, ∅), ({B}, ∅), ({A,B}, ∅)} This can also be described as a superset (⊇). In words: information is allowed to flow towards stricter levels of confidentiality. The combination operator (⊕) can express how security classes can perform read operations with respect to other security classes. For example: {A} ⊕ {A,B} = {A} — the only security class that can read from both {A} and {A,B} is {A}. {A} ⊕ {B} = ∅ — neither {A} nor {B} are allowed to read from both {A} and {B}. This can also be described as an intersection (∩) between security classes. An information flow policy can be illustrated as a Hasse diagram. The policy should also be a lattice, that is, it has a greatest lower-bound and least upper-bound (there always exists a combination between security classes). In the case of integrity, information will flow in the opposite direction, thus the policy will be inverted. == Information flow policy in security type systems == Once the policy is in place, the software developer can apply the security classes to the program components. Use of a security type system is usually combined with a compiler that can perform the verification of the information flow according to the type system rules. For the sake of simplicity, a very simple computer program, together with the information flow policy as described in the previous section, can be used as a demonstration. The simple program is given in the following pseudocode: if y{A} = 1 then x{A,B} := 0 else x{A,B} := 1 Here, an equality check is made on a variable y that is assigned the security class {A}. A variable x with a lower security class ({A,B}) is influenced by this check. This means that information is leaking from class {A} to class {A,B}, which is a violation of the confidentiality policy. This leak should be detected by the security type system. === Example === Designing a security type system requires a function (also known as a security environment) that creates a mapping from variables to security types, or classes. This function can be called Γ, such that Γ(x) = τ, where x is a variable and τ is the security class, or type. Security classes are assigned (also called "judgement") to program components, using the following notation: Types are assigned to read operations by: Γ ⊢ e : τ. Types are assigned to write operations by: Γ ⊢ S : τ cmd. Constants can be assigned any type. The following bottom-up notation can be used to decompose the program: ⁠assumption1 ... assumptionn/conclusion⁠. Once the program is decomposed into trivial judgements, by which the type can easily be determined, the types for the less trivial parts of the program can be derived. Each "numerator" is considered in isolation, looking at the type of each statement to see if an allowed type can be derived for the "denominator", based on the defined type system "rules". ==== Rules ==== The main part of the security type system is the rules. They say how the program should be decomposed and how type verification should be performed. This toy program consists of a conditional test and two possible variable assignments. Rules for these two events are defined as follows: Applying this to the simple program introduced above yields: The type system detects the policy violation in line 2, where a read operation of security class {A} is performed, followed by two write operations of a less strict security class {A,B}. In more formalized terms, {A} ⋢ {A,B}, {A,B} (from the rule of the conditional test). Thus, the program is classified as "not typeable". === Soundness === The soundness of a security type system can be informally defined as: If program P is well typed, P satisfies non-interference. Volpano, Smith and Irvine were the first to prove soundness of a security type system for a deterministic imperative programming language with a standard (non-instrumented) semantics using the notion of non-interference.
Read more →
DataViva

DataViva is an information visualization engine created by the Strategic Priorities Office of the government of Minas Gerais. DataViva makes official data about exports, industries, locations and occupations available for the entirety of Brazil through eight apps and more than 100 million possible visualizations. The first set of datum – also available at ALICEWEB – is provided by MDIC (Ministry of Development, Industry and Foreign Trade) / SECEX (Secretariat of Foreign Trade), an official institution of the Government of Brazil and shows foreign trade statistics for all exporting municipalities in the country. The other database, provided by Ministério do Trabalho e Emprego (MTE – Ministry of Labor and Employment), shows information about all the industries and occupations in Brazil (RAIS – Annual Social Information Report). The platform consists of eight core applications, each of which allows different ways of visualizing the data available. Some applications are descriptive, that is, showing data aggregated at various levels in a simple and comparative way, such as Treemapping. Others are prescriptive, using calculations that allow an analytic visualization of the data, based on theories such as the Product Space. All the applications are generated using D3plus, an open source JavaScript library built on top of D3.js by Alexander Simoes and Dave Landry. Inspired by The Observatory of Economic Complexity, DataViva is an open data, open-source, and free to use tool. It was developed in a partnership with Datawheel, co-founded by MIT Media Lab Professor César Hidalgo, and is maintained by the Government of Minas Gerais.
Read more →