AI And Analytics

AI And Analytics — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Control system

  A control system manages, commands, directs, or regulates the behavior of other devices or systems using control loops. It can range from a single home heating controller using a thermostat controlling a domestic boiler to large industrial control systems which are used for controlling processes or machines. The control systems are designed via control engineering process. For continuously modulated control, a feedback controller is used to automatically control a process or operation. The control system compares the value or status of the process variable (PV) being controlled with the desired value or setpoint (SP), and applies the difference as a control signal to bring the process variable output of the plant to the same value as the setpoint. For sequential and combinational logic, software logic, such as in a programmable logic controller, is used. == Open-loop and closed-loop control == == Feedback control systems == == Logic control == Logic control systems for industrial and commercial machinery were historically implemented by interconnected electrical relays and cam timers using ladder logic. Today, most such systems are constructed with microcontrollers or more specialized programmable logic controllers (PLCs). The notation of ladder logic is still in use as a programming method for PLCs. Logic controllers may respond to switches and sensors and can cause the machinery to start and stop various operations through the use of actuators. Logic controllers are used to sequence mechanical operations in many applications. Examples include elevators, washing machines and other systems with interrelated operations. An automatic sequential control system may trigger a series of mechanical actuators in the correct sequence to perform a task. For example, various electric and pneumatic transducers may fold and glue a cardboard box, fill it with the product and then seal it in an automatic packaging machine. PLC software can be written in many different ways – ladder diagrams, SFC (sequential function charts) or statement lists. == On–off control == On–off control uses a feedback controller that switches abruptly between two states. A simple bi-metallic domestic thermostat can be described as an on-off controller. When the temperature in the room (PV) goes below the user setting (SP), the heater is switched on. Another example is a pressure switch on an air compressor. When the pressure (PV) drops below the setpoint (SP) the compressor is powered. Refrigerators and vacuum pumps contain similar mechanisms. Simple on–off control systems like these can be cheap and effective. == Linear control == == Fuzzy logic == Fuzzy logic is an attempt to apply the easy design of logic controllers to the control of complex continuously varying systems. Basically, a measurement in a fuzzy logic system can be partly true. The rules of the system are written in natural language and translated into fuzzy logic. For example, the design for a furnace would start with: "If the temperature is too high, reduce the fuel to the furnace. If the temperature is too low, increase the fuel to the furnace." Measurements from the real world (such as the temperature of a furnace) are fuzzified and logic is calculated arithmetic, as opposed to Boolean logic, and the outputs are de-fuzzified to control equipment. When a robust fuzzy design is reduced to a single, quick calculation, it begins to resemble a conventional feedback loop solution and it might appear that the fuzzy design was unnecessary. However, the fuzzy logic paradigm may provide scalability for large control systems where conventional methods become unwieldy or costly to derive. Fuzzy electronics is an electronic technology that uses fuzzy logic instead of the two-value logic more commonly used in digital electronics. == Physical implementation == The range of control system implementation is from compact controllers often with dedicated software for a particular machine or device, to distributed control systems for industrial process control for a large physical plant. Logic systems and feedback controllers are usually implemented with programmable logic controllers. The Broadly Reconfigurable and Expandable Automation Device (BREAD) is a recent framework that provides many open-source hardware devices which can be connected to create more complex data acquisition and control systems.

  Read more →
• 

  Harvest now, decrypt later

  Harvest now, decrypt later (HNDL) is a surveillance strategy that relies on the acquisition and long-term storage of currently unreadable encrypted data awaiting possible breakthroughs in decryption technology that would render it readable in the future—a hypothetical date referred to as Y2Q (a reference to Y2K), or Q-Day. The most common concern is the prospect of developments in quantum computing which would allow current strong encryption algorithms to be broken at some time in the future, making it possible to decrypt any stored material that had been encrypted using those algorithms. However, the improvement in decryption technology need not be due to a quantum-cryptographic advance; any other form of attack capable of enabling decryption would be sufficient. The existence of this strategy has led to concerns about the need to urgently deploy post-quantum cryptography; even though no practical quantum attacks yet exist, some data stored now may still remain sensitive even decades into the future. As of 2022, the U.S. federal government has proposed a roadmap for organizations to start migrating toward quantum-cryptography-resistant algorithms to mitigate these threats. This new version of Commercial National Security Algorithm Suite uses publicly-available algorithms and is allowed for government use up to the TOP SECRET level. == Terminology and scope == The term “harvest now, decrypt later” encompasses various surveillance or espionage operations in which ciphertext or encrypted communications are collected today with the view that they may one day be decrypted, given sufficient advances in computing power or cryptanalysis. The abbreviation HNDL is sometimes used in technical and policy documents. The “Y2Q” (or “Q-Day”) label draws an analogy to the Y2K date-change issue, emphasising a potential future point at which current cryptography may collapse. The strategy is particularly relevant for data with long confidentiality lifetimes, such as diplomatic communications, personal health records, critical infrastructure logs, or intellectual property. == Mitigation strategies == The primary defense against HNDL attacks is the transition to post-quantum cryptography (PQC), which utilizes algorithms believed to be secure against quantum computer attacks. However, because PQC protects the data payload digitally, rather than the transmission itself, the encrypted data can still be harvested and stored. A complementary approach involves physical layer security (also known as optical layer encryption or photonic shielding). Unlike algorithmic encryption, this method modifies the optical waveform itself—often by burying the signal within optical noise or using spectral phase encoding—to render the transmission unrecordable by standard receivers. By preventing the attacker from capturing a valid signal in the first place, this approach aims to eliminate the "harvest" phase of the threat. Commercial implementations of harvest-proof optical encryption have been developed by firms such as CyberRidge to secure long-haul fiber networks. Field trials have demonstrated 100 Gbps throughput over legacy DWDM networks using this method.

  Read more →
• 

  HashClash

  HashClash was a volunteer computing project running on the Berkeley Open Infrastructure for Network Computing (BOINC) software platform to find collisions in the MD5 hash algorithm. It was based at Department of Mathematics and Computer Science at the Eindhoven University of Technology, and Marc Stevens initiated the project as part of his master's degree thesis. The project ended after Stevens defended his M.Sc. thesis in June 2007. However, SHA1 was added later, and the code repository was ported to git in 2017. The project was used to create a rogue certificate authority certificate in 2009.

  Read more →
• 

  Software token

  A software token (a.k.a. soft token) is a piece of a two-factor authentication security device that may be used to authorize the use of computer services. Software tokens are stored on a general-purpose electronic device such as a desktop computer, laptop, PDA, or mobile phone and can be duplicated. (Contrast hardware tokens, where the credentials are stored on a dedicated hardware device and therefore cannot be duplicated — absent physical invasion of the device) Because software tokens are something one does not physically possess, they are exposed to unique threats based on duplication of the underlying cryptographic material - for example, computer viruses and software attacks. Both hardware and software tokens are vulnerable to bot-based man-in-the-middle attacks, or to simple phishing attacks in which the one-time password provided by the token is solicited, and then supplied to the genuine website in a timely manner. Software tokens do have benefits: there is no physical token to carry, they do not contain batteries that will run out, and they are cheaper than hardware tokens. == Security architecture == There are two primary architectures for software tokens: shared secret and public-key cryptography. For a shared secret, an administrator will typically generate a configuration file for each end-user. The file will contain a username, a personal identification number, and the secret. This configuration file is given to the user. The shared secret architecture is potentially vulnerable in a number of areas. The configuration file can be compromised if it is stolen and the token is copied. With time-based software tokens, it is possible to borrow an individual's PDA or laptop, set the clock forward, and generate codes that will be valid in the future. Any software token that uses shared secrets and stores the PIN alongside the shared secret in a software client can be stolen and subjected to offline attacks. Shared secret tokens can be difficult to distribute, since each token is essentially a different piece of software. Each user must receive a copy of the secret, which can create time constraints. Some newer software tokens rely on public-key cryptography, or asymmetric cryptography. This architecture eliminates some of the traditional weaknesses of software tokens, but does not affect their primary weakness (ability to duplicate). A PIN can be stored on a remote authentication server instead of with the token client, making a stolen software token no good unless the PIN is known as well. However, in the case of a virus infection, the cryptographic material can be duplicated and then the PIN can be captured (via keylogging or similar) the next time the user authenticates. If there are attempts made to guess the PIN, it can be detected and logged on the authentication server, which can disable the token. Using asymmetric cryptography also simplifies implementation, since the token client can generate its own key pair and exchange public keys with the server.

  Read more →
• 

  Level-set method

  The Level-set method (LSM) is a conceptual framework for using level sets as a tool for numerical analysis of surfaces and shapes. LSM can perform numerical computations involving curves and surfaces on a fixed Cartesian grid without having to parameterize these objects. LSM makes it easier to perform computations on shapes with sharp corners and shapes that change topology (such as by splitting in two or developing holes). These characteristics make LSM effective for modeling objects that vary in time, such as an airbag inflating or a drop of oil floating in water. == Overview == The figure on the right illustrates several ideas about LSM. In the upper left corner is a bounded region with a well-behaved boundary. Below it, the red surface is the graph of a level set function φ {\displaystyle \varphi } determining this shape, and the flat blue region represents the X-Y plane. The boundary of the shape is then the zero-level set of φ {\displaystyle \varphi } , while the shape itself is the set of points in the plane for which φ {\displaystyle \varphi } is positive (interior of the shape) or zero (at the boundary). In the top row, the shape's topology changes as it is split in two. It is challenging to describe this transformation numerically by parameterizing the boundary of the shape and following its evolution. An algorithm can be used to detect the moment the shape splits in two and then construct parameterizations for the two newly obtained curves. On the bottom row, however, the plane at which the level set function is sampled is translated upwards, on which the shape's change in topology is described. It is less challenging to work with a shape through its level-set function rather than with itself directly, in which a method would need to consider all the possible deformations the shape might undergo. Thus, in two dimensions, the level-set method amounts to representing a closed curve Γ {\displaystyle \Gamma } (such as the shape boundary in our example) using an auxiliary function φ {\displaystyle \varphi } , called the level-set function. The curve Γ {\displaystyle \Gamma } is represented as the zero-level set of φ {\displaystyle \varphi } by Γ = { ( x , y ) ∣ φ ( x , y ) = 0 } , {\displaystyle \Gamma =\{(x,y)\mid \varphi (x,y)=0\},} and the level-set method manipulates Γ {\displaystyle \Gamma } implicitly through the function φ {\displaystyle \varphi } . This function φ {\displaystyle \varphi } is assumed to take positive values inside the region delimited by the curve Γ {\displaystyle \Gamma } and negative values outside. == The level-set equation == If the curve Γ {\displaystyle \Gamma } moves in the normal direction with a speed v {\displaystyle v} , then by chain rule and implicit differentiation, it can be determined that the level-set function φ {\displaystyle \varphi } satisfies the level-set equation ∂ φ ∂ t = v | ∇ φ | . {\displaystyle {\frac {\partial \varphi }{\partial t}}=v|\nabla \varphi |.} Here, | ⋅ | {\displaystyle |\cdot |} is the Euclidean norm (denoted customarily by single bars in partial differential equations), and t {\displaystyle t} is time. This is a partial differential equation, in particular a Hamilton–Jacobi equation, and can be solved numerically, for example, by using finite differences on a Cartesian grid. However, the numerical solution of the level set equation may require advanced techniques. Simple finite difference methods fail quickly. Upwinding methods such as the Godunov method are considered better; however, the level set method does not guarantee preservation of the volume and shape of the set level in an advection field that maintains shape and size, for example, a uniform or rotational velocity field. Instead, the shape of the level set may become distorted, and the level set may disappear over a few time steps. Therefore, high-order finite difference schemes, such as high-order essentially non-oscillatory (ENO) schemes, are often required, and even then, the feasibility of long-term simulations is questionable. More advanced methods have been developed to overcome this; for example, combinations of the leveling method with tracking marker particles suggested by the velocity field. == Example == Consider a unit circle in R 2 {\textstyle \mathbb {R} ^{2}} , shrinking in on itself at a constant rate, i.e. each point on the boundary of the circle moves along its inwards pointing normally at some fixed speed. The circle will shrink and eventually collapse down to a point. If an initial distance field is constructed (i.e. a function whose value is the signed Euclidean distance to the boundary, positive interior, negative exterior) on the initial circle, the normalized gradient of this field will be the circle normal. If the field has a constant value subtracted from it in time, the zero level (which was the initial boundary) of the new fields will also be circular and will similarly collapse to a point. This is due to this being effectively the temporal integration of the Eikonal equation with a fixed front velocity. == Applications == In mathematical modeling of combustion, LSM is used to describe the instantaneous flame surface, known as the G equation. Level-set data structures have been developed to facilitate the use of the level-set method in computer applications. Computational fluid dynamics Trajectory planning Optimization Image processing Computational biophysics Discrete complex dynamics (visualization of the parameter plane and the dynamic plane) == History == The level-set method was developed in 1979 by Alain Dervieux, and subsequently popularized by Stanley Osher and James Sethian. It has since become popular in many disciplines, such as image processing, computer graphics, computational geometry, optimization, computational fluid dynamics, and computational biology.

  Read more →
• 

  Sentiment analysis

  Sentiment analysis (also known as opinion mining) is the use of natural language processing, text analysis, computational linguistics, and biometrics to systematically identify, extract, quantify, and study affective states and subjective information. Sentiment analysis is widely applied to voice of the customer materials such as reviews and survey responses, online and social media, and healthcare materials for applications that range from marketing to customer service to clinical medicine. With the rise of deep language models, such as RoBERTa, more difficult data domains can be analyzed, e.g., news texts where authors typically express their opinion/sentiment less explicitly. == Types == A basic task in sentiment analysis is classifying the polarity of a given text at the document, sentence, or feature/aspect level—whether the expressed opinion in a document, a sentence or an entity feature/aspect is positive, negative, or neutral. Advanced, "beyond polarity" sentiment classification looks, for instance, at emotional states such as enjoyment, anger, disgust, sadness, fear, and surprise. Precursors to sentimental analysis include the General Inquirer, which provided hints toward quantifying patterns in text and, separately, psychological research that examined a person's psychological state based on analysis of their verbal behavior. Subsequently, the method described in a patent by Volcani and Fogel, looked specifically at sentiment and identified individual words and phrases in text with respect to different emotional scales. A current system based on their work, called EffectCheck, presents synonyms that can be used to increase or decrease the level of evoked emotion in each scale. Many other subsequent efforts were less sophisticated, using a mere polar view of sentiment, from positive to negative, such as work by Turney, and Pang who applied different methods for detecting the polarity of product reviews and movie reviews respectively. This work is at the document level. One can also classify a document's polarity on a multi-way scale, which was attempted by Pang and Snyder among others: Pang and Lee expanded the basic task of classifying a movie review as either positive or negative to predict star ratings on either a 3- or a 4-star scale, while Snyder performed an in-depth analysis of restaurant reviews, predicting ratings for various aspects of the given restaurant, such as the food and atmosphere (on a five-star scale). First steps to bringing together various approaches—learning, lexical, knowledge-based, etc.—were taken in the 2004 AAAI Spring Symposium where linguists, computer scientists, and other interested researchers first aligned interests and proposed shared tasks and benchmark data sets for the systematic computational research on affect, appeal, subjectivity, and sentiment in text. Even though in most statistical classification methods, the neutral class is ignored under the assumption that neutral texts lie near the boundary of the binary classifier, several researchers suggest that, as in every polarity problem, three categories must be identified. Moreover, it can be proven that specific classifiers such as the Max Entropy and SVMs can benefit from the introduction of a neutral class and improve the overall accuracy of the classification. There are in principle two ways for operating with a neutral class. Either, the algorithm proceeds by first identifying the neutral language, filtering it out and then assessing the rest in terms of positive and negative sentiments, or it builds a three-way classification in one step. This second approach often involves estimating a probability distribution over all categories (e.g. naive Bayes classifiers as implemented by the NLTK). Whether and how to use a neutral class depends on the nature of the data: if the data is clearly clustered into neutral, negative and positive language, it makes sense to filter the neutral language out and focus on the polarity between positive and negative sentiments. If, in contrast, the data are mostly neutral with small deviations towards positive and negative affect, this strategy would make it harder to clearly distinguish between the two poles. A different method for determining sentiment is the use of a scaling system whereby words commonly associated with having a negative, neutral, or positive sentiment are given an associated number on a −10 to +10 scale (most negative up to most positive) or simply from 0 to a positive upper limit such as +4. This makes it possible to adjust the sentiment of a given term relative to its environment (usually on the level of the sentence). When a piece of unstructured text is analyzed using natural language processing, each concept in the specified environment is given a score based on the way sentiment words relate to the concept and its associated score. This allows movement to a more sophisticated understanding of sentiment, because it is now possible to adjust the sentiment value of a concept relative to modifications that may surround it. Words, for example, that intensify, relax or negate the sentiment expressed by the concept can affect its score. Alternatively, texts can be given a positive and negative sentiment strength score if the goal is to determine the sentiment in a text rather than the overall polarity and strength of the text. There are various other types of sentiment analysis, such as aspect-based sentiment analysis, grading sentiment analysis (positive, negative, neutral), multilingual sentiment analysis and detection of emotions. === Subjectivity/objectivity identification === This task is commonly defined as classifying a given text (usually a sentence) into one of two classes: objective or subjective. This problem can sometimes be more difficult than polarity classification. The subjectivity of words and phrases may depend on their context and an objective document may contain subjective sentences (e.g., a news article quoting people's opinions). Moreover, as mentioned by Su, results are largely dependent on the definition of subjectivity used when annotating texts. However, Pang showed that removing objective sentences from a document before classifying its polarity helped improve performance. Subjective and objective identification, emerging subtasks of sentiment analysis to use syntactic, semantic features, and machine learning knowledge to identify if a sentence or document contains facts or opinions. Awareness of recognizing factual and opinions is not recent, having possibly first presented by Carbonell at Yale University in 1979. The term objective refers to the incident carrying factual information. Example of an objective sentence: 'To be elected president of the United States, a candidate must be at least thirty-five years of age.' The term subjective describes the incident contains non-factual information in various forms, such as personal opinions, judgment, and predictions, also known as 'private states'. In the example down below, it reflects a private states 'We Americans'. Moreover, the target entity commented by the opinions can take several forms from tangible product to intangible topic matters stated in Liu (2010). Furthermore, three types of attitudes were observed by Liu (2010), 1) positive opinions, 2) neutral opinions, and 3) negative opinions. Example of a subjective sentence: 'We Americans need to elect a president who is mature and who is able to make wise decisions.' This analysis is a classification problem. Each class's collections of words or phrase indicators are defined for to locate desirable patterns on unannotated text. For subjective expression, a different word list has been created. Lists of subjective indicators in words or phrases have been developed by multiple researchers in the linguist and natural language processing field states in Riloff et al. (2003). A dictionary of extraction rules has to be created for measuring given expressions. Over the years, in subjective detection, the features extraction progression from curating features by hand to automated features learning. At the moment, automated learning methods can further separate into supervised and unsupervised machine learning. Patterns extraction with machine learning process annotated and unannotated text have been explored extensively by academic researchers. However, researchers recognized several challenges in developing fixed sets of rules for expressions respectably. Much of the challenges in rule development stems from the nature of textual information. Six challenges have been recognized by several researchers: 1) metaphorical expressions, 2) discrepancies in writings, 3) context-sensitive, 4) represented words with fewer usages, 5) time-sensitive, and 6) ever-growing volume. Metaphorical expressions. The text contains metaphoric expression may impact on the performance on the extraction. Besides, metaphors take in different forms, which may have been contribu

  Read more →
• 

  Correlation immunity

  In mathematics, the correlation immunity of a Boolean function is a measure of the degree to which its outputs are uncorrelated with some subset of its inputs. Specifically, a Boolean function is said to be correlation-immune of order m if every subset of m or fewer variables in x 1 , x 2 , … , x n {\displaystyle x_{1},x_{2},\ldots ,x_{n}} is statistically independent of the value of f ( x 1 , x 2 , … , x n ) {\displaystyle f(x_{1},x_{2},\ldots ,x_{n})} . == Definition == A function f : F 2 n → F 2 {\displaystyle f:\mathbb {F} _{2}^{n}\rightarrow \mathbb {F} _{2}} is k {\displaystyle k} -th order correlation immune if for any independent n {\displaystyle n} binary random variables X 0 … X n − 1 {\displaystyle X_{0}\ldots X_{n-1}} , the random variable Z = f ( X 0 , … , X n − 1 ) {\displaystyle Z=f(X_{0},\ldots ,X_{n-1})} is independent from any random vector ( X i 1 … X i k ) {\displaystyle (X_{i_{1}}\ldots X_{i_{k}})} with 0 ≤ i 1 < … < i k < n {\displaystyle 0\leq i_{1}<\ldots Read more →

• 

  Social media reach

  Social media reach is a media analytics metric that refers to the number of users who have come across a particular content on a particular social media platform. Social media platforms have their own individual ways of tracking, analyzing and reporting the traffic on each of the individual platforms. As these platforms are a main source of communication between companies and their target audiences, by conducting research, companies are able to utilize analytical information, such as the reach of their posts, to better understand the interactions between the users and their content. There are multiple underlying factors that will determine what shows up on a newsfeed or timeline. Algorithms, for example, are a type of factor that can alter the reach of a post due to the way the algorithm is coded, which can affect who sees a post and when. Other examples of factors that can impede the reach can include the time at which posts are made, as well as how frequent the posts are between one another. In comparison, an impression is the total number of circumstances where content has been shown on a social timeline, meanwhile, engagement looks at how people interact with the content that they see on a social platform such as like, share or retweet. == Reach on Facebook == Facebook has their own analytic platform which allows the user to see how other users are interacting with their posts, with the use of multiple metrics. This is not something the average user uses, but rather a tool that is used by pages or public figures. For example, Facebook pages that represent a business often look at the activity their posts have generated. There are three types of reach that can be looked at on the Facebook analytic platform. === Types of reach === ==== Organic Reach ==== This type of reach regards the number of distinct users that have seen a specific post on their feed. Organic reach, in other words is the number of people who have seen the post being analyzed on their Facebook newsfeed. Data gathered from this type of reach can give intel to those doing the analysis, such as the demographics of those who have seen the post. ==== Paid Reach ==== This type of reach regards the number of times that distinct users have come across sponsored posts, ads or content. In other words, paid reach is the number of times Facebook users have seen a post that has been paid for by a company. Data collected can give insight, to advertisers or marketers for example, on the activity based around the reach of their post. ==== Viral Reach ==== This type of reach regards the number of views by distinct users on posts that have been commented on or shared by their friends on Facebook. In other words, viral reach looks at the number of people who have seen a post after a friend of theirs commented or shared the original post, therefore it showed on their timeline. Viral reach can be looked at in terms of a collective number of times that the post has been on individual user's timelines. Data collected from viral reach can be used in multiple ways, for example, it can be used to analyze the type of content that gets shared or commented on and can be further used to compare to other posts. === Engaged users === This refers to the number of individual users who have clicked and interacted with a post on Facebook. == Reach on Twitter == Twitter gives access to any of their users to analytics of their tweets as well as their followers. Their dashboard is user friendly, which allows anyone to take a look at the analytics behind their Twitter account. This open access is useful for both the average user and companies as it can provide a quick glance or general outlook of who has seen their tweets. The way that Twitter works is slightly different than the way of Facebook in terms of the reach. On Twitter, especially for users with a higher profile, they are not only engaging with the people who follow them, but also with the followers of their own followers. The reach metric on Twitter looks at the quantity of Twitter users who have been engaged, but also the number of users that follow them as well. This metric is useful to see the if the tweets/content being shared on Twitter are contributing to the growth of audience on this platform. == Reach on Instagram == Instagram gives their users access to their reach, in the Instagram Insights section. Instagram insights can be used to learn more about an account's followers and performance. Reach indicates the total number of unique Instagram accounts that have seen your Instagram post or story. You can find this data by looking at each individual post insights. == Uses of reach == The reach can be a useful metric to analyze for marketers and advertisers. Social media is a platform that is used by marketers to directly target their intended audience with ease. These platforms not only allow marketers to get a better understanding of their audience, but also allow advertisers to insert their ads onto the timelines of specific users to later be able to conduct research to see the reach of their posts/content. The basic goal of marketers is to increase their reach as much as possible to impact bigger audiences of their dream customers and, in the end, make more sales. When doing organic social media marketing, using paid methods like ads or doing influencer marketing whether it is paid or free, it allows marketers to track the performance of their strategy and tweak it based on what works and what does not. == Analytics and reach == Social analytics looks at the data collected based on the interactions of users on social media platforms. A lot of information can be gathered which can provide intel based on user activities on social media. When looking into analytics in regard to social media, each company or group has a different goal in mind to engage their audience. At a glance, the three might seem as if they are very similar, however the differences between them are significant. There are many aspects that can be analyzed from the data gathered from social media platforms, depending on what is being observed, the correct metric would then be selected to further analyze. One example of the many metrics that can be used through social analytics is the reach. == Reach formula == To calculate social media reach one can use the following formula: R = I f ¯ {\displaystyle R={\frac {I}{\bar {f}}}} where R {\displaystyle R} — is social media reach, I {\displaystyle I} stands for the number of impressions, f ¯ {\displaystyle {\bar {f}}} is the average frequency of impressions per user. f ¯ {\displaystyle {\bar {f}}} represents the number of events when the ad is shown to a particular user. The average value should be calculated over the time period with stable settings of advertisement campaign. == Commenting For Better Reach == Commenting For Better Reach also known as "CFBR" is a widely used strategy for organically boosting post reach on social media platforms. Algorithms tend to favor posts with substantial likes and comments, granting them broader exposure compared to less engaging content. Primarily seen on LinkedIn, a platform geared toward professional networking and business connections, the use of CFBR signals active engagement aimed at enhancing post visibility. It is important to note that genuine and meaningful comments are key to effective engagement. Spammy or irrelevant comments not only detract from the conversation but may also limit a post's potential reach and impact.

  Read more →
• 

  Apptek

  Applications Technology (AppTek) is a U.S. company headquartered in McLean, Virginia that specializes in artificial intelligence and machine learning for human language technologies. The company provides both managed and professional services for natural language processing (NLP) technologies including automatic speech recognition (ASR), neural machine translation (MT), natural-language understanding (NLU) and neural speech synthesis. AppTek's Head of Science, Prof. Dr. -Ing Hermann Ney, was awarded the IEEE James L. Flanagan Speech and Audio Processing Award in 2019 and the ISCA Medal for Scientific Achievement in 2021 for his work in natural language processing. == History == AppTek was acquired in 1998 by Lernout & Hauspie (at the time a NASDAQ publicly traded company), AppTek organized a management buy-out and went private again in 2001. In 2014, the company sold its hybrid machine translation technology to eBay and has since rebuilt the platform to modern neural-based approaches for machine translation. In 2020, SOSi acquired non-controlling interest in AppTek and became an exclusive reseller of AppTek products for U.S. federal, state, and local government entities.

  Read more →
• 

  Chaffing and winnowing

  Chaffing and winnowing is a cryptographic technique to achieve confidentiality without using encryption when sending data over an insecure channel. The name is derived from agriculture: after grain has been harvested and threshed, it remains mixed together with inedible fibrous chaff. The chaff and grain are then separated by winnowing, and the chaff is discarded. The cryptographic technique was conceived by Ron Rivest and published in an on-line article on 18 March 1998. Although it bears similarities to both traditional encryption and steganography, it cannot be classified under either category. This technique allows the sender to deny responsibility for encrypting their message. When using chaffing and winnowing, the sender transmits the message unencrypted, in clear text. Although the sender and the receiver share a secret key, they use it only for authentication. However, a third party can make their communication confidential by simultaneously sending specially crafted messages through the same channel. == How it works == The sender (Alice) wants to send a message to the receiver (Bob). In the simplest setup, Alice enumerates the symbols in her message and sends out each in a separate packet. If the symbols are complex enough, such as natural-language text, an attacker may be able to distinguish the real symbols from poorly faked chaff symbols, posing a similar problem as steganography in needing to generate highly realistic fakes; to avoid this, the symbols can be reduced to just single 0/1 bits, and realistic fakes can then be simply randomly generated 50:50 and are indistinguishable from real symbols. In general, the method requires each symbol to arrive in-order and to be authenticated by the receiver. When implemented over networks that may change the order of packets, the sender places the symbol's serial number in the packet, the symbol itself (both unencrypted), and a message authentication code (MAC). Many MACs use a secret key Alice shares with Bob, but it is sufficient that the receiver has a method to authenticate the packets. Rivest notes an interesting property of chaffing-and-winnowing is that third parties (such as an ISP) can opportunistically add it to communications without needing permission or coordination with the sender/recipient. A third-party (Charles) who transmits Alice's packets to Bob, interleaves the packets with corresponding bogus packets (called "chaff") with corresponding serial numbers, arbitrary symbols, and a random number in place of the MAC. Charles does not need to know the key to do that (real MACs are large enough that it is extremely unlikely to generate a valid one by chance, unlike in the example). Bob uses the MAC to find the authentic messages and drops the "chaff" messages. This process is called "winnowing". An eavesdropper located between Alice and Charles can easily read Alice's message. But an eavesdropper between Charles and Bob would have to tell which packets are bogus and which are real (i.e. to winnow, or "separate the wheat from the chaff"). That is infeasible if the MAC used is secure and Charles does not leak any information on packet authenticity (e.g. via timing). If a fourth party joins the example (named Darth) who wants to send counterfeit messages to impersonate Alice, it would require Alice to disclose her secret key. If Darth cannot force Alice to disclose an authentication key (the knowledge of which would enable him to forge messages from Alice), then her messages will remain confidential. Charles, on the other hand, is no target of Darth's at all, since Charles does not even possess any secret keys that could be disclosed. == Variations == The simple variant of the chaffing and winnowing technique described above adds many bits of overhead per bit of original message. To make the transmission more efficient, Alice can process her message with an all-or-nothing transform and then send it out in much larger chunks. The chaff packets will have to be modified accordingly. Because the original message can be reconstructed only by knowing all of its chunks, Charles needs to send only enough chaff packets to make finding the correct combination of packets computationally infeasible. Chaffing and winnowing lends itself especially well to use in packet-switched network environments such as the Internet, where each message (whose payload is typically small) is sent in a separate network packet. In another variant of the technique, Charles carefully interleaves packets coming from multiple senders. That eliminates the need for Charles to generate and inject bogus packets in the communication. However, the text of Alice's message cannot be well protected from other parties who are communicating via Charles at the same time. This variant also helps protect against information leakage and traffic analysis. == Implications for law enforcement == Ron Rivest suggests that laws related to cryptography, including export controls, would not apply to chaffing and winnowing because it does not employ any encryption at all. The power to authenticate is in many cases the power to control, and handing all authentication power to the government is beyond all reason The author of the paper proposes that the security implications of handing everyone's authentication keys to the government for law-enforcement purposes would be far too risky, since possession of the key would enable someone to masquerade and communicate as another entity, such as an airline controller. Furthermore, Ron Rivest contemplates the possibility of rogue law enforcement officials framing up innocent parties by introducing the chaff into their communications, concluding that drafting a law restricting chaffing and winnowing would be far too difficult. == Trivia == The term winnowing was suggested by Ronald Rivest's father. Before the publication of Rivest's paper in 1998 other people brought to his attention a 1965 novel, Rex Stout's The Doorbell Rang, which describes the same concept and was thus included in the paper's references.

  Read more →
• 

  Air Force Network

  Air Force Network (AFNet) is an Indian Air Force (IAF) owned, operated and managed digital information grid. The AFNet replaces the Indian Air Force's (IAF) old communication network set-up using the tropo-scatter technology of the 1950s making it a true net-centric combat force. The IAF project is part of the overall mission to network all three services; The Indian Army, The Indian Navy and The Indian Air Force. The former Defence Minister AK Antony inaugurated the IAF's the AFNET on 14 September 2010 dedicating it to the people of India, for their direct or indirect participation in the communication revolution. == Background == Armed Forces in India has been using troposcatters as primary means of military communications since the 1950s, thereby occupying huge and expensive 2G and 3G spectrums which otherwise could have been used for expanding and de-clogging the civilian wireless communication network. The rapid expansion of civilian mobile telephony leading to need for larger bandwidth for wireless communication and commercial need to operate the 3G network necessitated the Government of India to have the Indian Armed Forces vacate the spectrum occupied by them. Thus the government of India through Department of Telecommunication (DoT) started a project called "Network for Spectrum" to set up a fiber optics network for the exclusive use of Indian Armed Forces in exchange for spectrum being released by the Defence Forces. The aim of 'Network for Spectrum' being twofold - to facilitate the growth of national tele-density on the one hand, and ensuring modernization of defence communications with the state-of-the-art communication infrastructure, and to support net-centric military operations. The Department of Telecom and the Ministry of Defence signed the memorandum of understanding for vacating the spectrum and setting up dedicated network for the use of defence forces. In this MoU, DoT agreed to laying of 40,000 route kilometres of optical fibre cable connecting 219 Army stations, 33 Navy stations and 162 points for the Air Force. It further agreed to setting up an exclusive defence band and Defence Interest Zone along 100 km of the international border, where spectrum will be reserved only for use by the Armed Forces. The total cost of implementing "Network for Spectrum" project is estimated to be ₹ 10,000 crores. AFNet is Indian Air Force component of Digital Information Grid under "Network for Spectrum" project and the AFNet has been extended and connected to the Digital Information Grid Project under implementation for the Indian Navy and the Indian Army on 2015. == Project Origin == The Air Force Network (AFNet) had been developed by the Indian Air Force at a cost of ₹1,077 crore (US$235.53 million) in collaboration with HCL Technologies and Bharat Sanchar Nigam Limited. It will replace the Air Force's more than half-a-century-old telecom network. This project is part of the defence ministry's initiative to digitize the communication systems of the three armed forces under "Network for Spectrum" initiative to improve coordination among themselves and other Military and Strategic Institution. IAF was the first to complete this gigabyte digital information grid implemented under the AFNet project. AFNet will be connected and extended to a Unified Digital Grid encompassing all the legs of Indian Armed Forces. The then defence minister, A. K. Antony, inaugurated the AFNet, IAF's gigabyte digital information grid. The grid is aimed at improving the network-centric warfare capability of the Air Force. The event also saw the presence of other personalities including the then Minister of Communication & IT, A. Raja; the Marshal of the Air Force, Arjan Singh; the Chief of the Air Staff, the Chief of the Army Staff and other officials from the three services and members of the Industry. The event also featured a practice interception of a simulated aerial target by a MiG-29 which took off from an airbase in the Punjab sector using the AFNet capabilities. Further capabilities in line with network centric warfare were also demonstrated. This included sharing information, videos and pictures by operational assets and platforms like UAVs and AWACS to decision-makers who are several hundred kilometres apart. == Technology, Design & Structure == AFNet incorporates the latest traffic transportation technology in form of Internet Protocol (IP) packets over the network using Multiprotocol Label Switching (MPLS). A large Voice over Internet Protocol (VoIP) layer with stringent quality of service enforcement will facilitate robust, high quality voice, video and conferencing solutions. AFNet will prove to be an effective force multiplier for intelligence analysis, mission planning and control, post-mission feedback and related activities like maintenance, logistics and administration. A comprehensive design with multi-layer security precautions for “Defence in Depth” have been planned by incorporating encryption technologies, Intrusion Prevention Systems to ensure the resistance of the IT system against information manipulation and eavesdropping. The network is secured with a host of advanced state-of-the-art encryption technologies. It is designed for high reliability with redundancy built into the network design itself. The AFNet is also capable of transmitting video from unmanned surveillance aircraft (UAV), pictures from airborne warning and control systems (AWACS) to decision makers on the ground and providing intelligence inputs from remote areas. The AFNet is also expected to facilitate accelerated economic growth by providing radio frequency spectrum for telecommunication purposes. AFNET will be the largest Multi-protocol Label Switching (MPLS) network in the defence segment. == Demonstration == At the AFNet launch, the IAF showcased a practice interception of simulated enemy targets by a pair of Mig-29 fighter aircraft airborne from an advanced airbase in the Punjab sector using the gigabyte digital information grid. During the AFNet-assisted operations, the Indian fighter jets neutralised intruding targets in the western sector, which was played out live on the giant screens at the Air Force auditorium offering a glimpse of the harnessed potential of the system. The final orders for engaging the enemy targets were issued live by Antony, whose queries about how the operation went were responded to by the pilot as "excellent". Various other functionalities contributing towards Network Centric Warfare were also showcased. These consisted of facilitating video from Unmanned Aerial Vehicle (UAV), pictures from an AWACS aircraft to the decision-makers on ground sitting hundreds of kilometres away, providing intelligence inputs from far-flung areas at central locations seamlessly. This was possible mainly because of the robust networking platform provided by AFNet. == Integrated Air Command and Control System == Integrated Air Command and Control System (IACCS) is an automated command and control system for air defence operated by the Indian Air Force. IACCS operations rides the AFNET backbone integrating all ground-based and airborne sensors, air defense weapon systems and command and control (C2) nodes. Subsequent integration with other services networks and civil radars will provide an integrated Air Situation Picture to operators to carry out AD role. The project was envisaged in 1995 following the Purulia arms drop case and was a part of IAF’s first Air Power Doctrinal manual issued in the 2000s, later revised in 2022. The first node in the western sectors had been operationalised by September 2010. The first five nodes located in the western and south western sectors were commissioned in 2011. The Air Force was preparing to seek clearance for five further nodes which would cover the rest of the nation including the island territories. Through the IACCS, IAF will connect all of its space, air and ground assets quickly, for total awareness of a region. This will offer connectivity for all the ground platforms and airborne platforms (including AEW&C), as a part of the network centricity of IAF. The IACCS also facilitates real-time transport of images, data and voice, amongst satellites, aircraft and ground stations. By 2018, five IACCS nodes had been established including Barnala (Punjab), Wadsar (Gujarat), Aya Nagar (Delhi), Jodhpur (Rajasthan) and Ambala (Haryana). Following this, under Phase-II, 4 additional nodes and 10 sub-nodes are to be set up. The major nodes will be established in the Eastern, Central, Southern and Andaman and Nicobar sectors. The second phase will cost ₹8,000 crore (equivalent to ₹110 billion or US$1.1 billion in 2023). IACCS successfully integrated all operating radars, including its own, the Army's, and civilian ones, in 2023. This enabled the autonomous firing response capability to take down incoming missiles, aircraft, and UAVs. The Akashteer system of the Indian Army is being integrated with the IACCS

  Read more →
• 

  CARE Principles for Indigenous Data Governance

  The CARE Principles for Indigenous Data Governance are a set of principles intended to guide open data projects in engaging Indigenous Peoples rights and interests. CARE was created in 2019 by the International Indigenous Data Sovereignty Interest Group, a group that is a part of the Research Data Alliance. It outlines collective rights related to open data in the context of the United Nations Declaration on the Rights of Indigenous Peoples and Indigenous data sovereignty. CARE is an acronym which stands for Collective Benefit, Authority to Control, Responsibility, Ethics. The CARE Principles are 'people and purpose-oriented, reflecting the crucial role of data in advancing Indigenous innovation and self-determination', and intended as a complement to the data-oriented perspective of other standards such as FAIR data (findable, accessible, interoperable, reusable). The CARE principles have been embedded into the Beta version of Standardised Data on Initiatives (STARDIT). CARE principles were the basis of a submission to the UN's Global Digital Compact.

  Read more →
• 

  Three-factor learning

  In neuroscience and machine learning, three-factor learning is the combination of Hebbian plasticity with a third modulatory factor to stabilise and enhance synaptic learning. This third factor can represent various signals such as reward, punishment, error, surprise, or novelty, often implemented through neuromodulators. == Description == Three-factor learning introduces the concept of eligibility traces, which flag synapses for potential modification pending the arrival of the third factor, and helps temporal credit assignement by bridging the gap between rapid neuronal firing and slower behavioral timescales, from which learning can be done. Biological basis for Three-factor learning rules have been supported by experimental evidence. This approach addresses the instability of classical Hebbian learning by minimizing autocorrelation and maximizing cross-correlation between inputs.

  Read more →
• 

  Cryptographic Module Testing Laboratory

  Cryptographic Module Testing Laboratory (CMTL) is an information technology (IT) computer security testing laboratory that is accredited to conduct cryptographic module evaluations for conformance to the FIPS 140-2 U.S. Government standard. The National Institute of Standards and Technology (NIST) National Voluntary Laboratory Accreditation Program (NVLAP) accredits CMTLs to meet Cryptographic Module Validation Program (CMVP) standards and procedures. This has been replaced by FIPS 140-2 and the Cryptographic Module Validation Program (CMVP). == CMTL requirements == These laboratories must meet the following requirements: NIST Handbook 150, NVLAP Procedures and General Requirements NIST Handbook 150-17 Information Technology Security Testing - Cryptographic Module Testing NVLAP Specific Operations Checklist for Cryptographic Module Testing == FIPS 140-2 in relation to the Common Criteria == A CMTL can also be a Common Criteria (CC) Testing Laboratory (CCTL). The CC and FIPS 140-2 are different in the abstractness and focus of evaluation. FIPS 140-2 testing is against a defined cryptographic module and provides a suite of conformance tests to four FIPS 140 security levels. FIPS 140-2 describes the requirements for cryptographic modules and includes such areas as physical security, key management, self tests, roles and services, etc. The standard was initially developed in 1994 - prior to the development of the CC. The CC is an evaluation against a Protection Profile (PP), or security target (ST). Typically, a PP covers a broad range of products. A CC evaluation does not supersede or replace a validation to either FIPS 140-1, FIPS140-2 or FIPS 140-3. The four security levels in FIPS 140-1 and FIPS 140-2 do not map directly to specific CC EALs or to CC functional requirements. A CC certificate cannot be a substitute for a FIPS 140-1 or FIPS 140-2 certificate. If the operational environment is a modifiable operational environment, the operating system requirements of the Common Criteria are applicable at FIPS Security Levels 2 and above. FIPS 140-1 required evaluated operating systems that referenced the Trusted Computer System Evaluation Criteria (TCSEC) classes C2, B1 and B2. However, TCSEC is no longer in use and has been replaced by the Common Criteria. Consequently, FIPS 140-2 now references the Common Criteria. FIPS 140-2 or FIPS 140-3 validation efforts can be in some parts reused in Common Criteria evaluations, specifically in areas related to entropy source and cryptographic algorithms.

  Read more →
• 

  Data stream management system

  A data stream management system (DSMS) is a computer software system to manage continuous data streams. It is similar to a database management system (DBMS), which is, however, designed for static data in conventional databases. A DBMS also offers a flexible query processing so that the information needed can be expressed using queries. However, in contrast to a DBMS, a DSMS executes a continuous query that is not only performed once, but is permanently installed. Therefore, the query is continuously executed until it is explicitly uninstalled. Since most DSMS are data-driven, a continuous query produces new results as long as new data arrive at the system. This basic concept is similar to complex event processing so that both technologies are partially coalescing. == Functional principle == One important feature of a DSMS is the possibility to handle potentially infinite and rapidly changing data streams by offering flexible processing at the same time, although there are only limited resources such as main memory. The following table provides various principles of DSMS and compares them to traditional DBMS. == Processing and streaming models == One of the biggest challenges for a DSMS is to handle potentially infinite data streams using a fixed amount of memory and no random access to the data. There are different approaches to limit the amount of data in one pass, which can be divided into two classes. For the one hand, there are compression techniques that try to summarize the data and for the other hand there are window techniques that try to portion the data into (finite) parts. === Synopses === The idea behind compression techniques is to maintain only a synopsis of the data, but not all (raw) data points of the data stream. The algorithms range from selecting random data points called sampling to summarization using histograms, wavelets or sketching. One simple example of a compression is the continuous calculation of an average. Instead of memorizing each data point, the synopsis only holds the sum and the number of items. The average can be calculated by dividing the sum by the number. However, it should be mentioned that synopses cannot reflect the data accurately. Thus, a processing that is based on synopses may produce inaccurate results. === Windows === Instead of using synopses to compress the characteristics of the whole data streams, window techniques only look on a portion of the data. This approach is motivated by the idea that only the most recent data are relevant. Therefore, a window continuously cuts out a part of the data stream, e.g. the last ten data stream elements, and only considers these elements during the processing. There are different kinds of such windows like sliding windows that are similar to FIFO lists or tumbling windows that cut out disjoint parts. Furthermore, the windows can also be differentiated into element-based windows, e.g., to consider the last ten elements, or time-based windows, e.g., to consider the last ten seconds of data. There are also different approaches to implementing windows. There are, for example, approaches that use timestamps or time intervals for system-wide windows or buffer-based windows for each single processing step. Sliding-window query processing is also suitable to being implemented in parallel processors by exploiting parallelism between different windows and/or within each window extent. == Query processing == Since there are a lot of prototypes, there is no standardized architecture. However, most DSMS are based on the query processing in DBMS by using declarative languages to express queries, which are translated into a plan of operators. These plans can be optimized and executed. A query processing often consists of the following steps. === Formulation of continuous queries === The formulation of queries is mostly done using declarative languages like SQL in DBMS. Since there are no standardized query languages to express continuous queries, there are a lot of languages and variations. However, most of them are based on SQL, such as the Continuous Query Language (CQL), StreamSQL and ESP. There are also graphical approaches where each processing step is a box and the processing flow is expressed by arrows between the boxes. The language strongly depends on the processing model. For example, if windows are used for the processing, the definition of a window has to be expressed. In StreamSQL, a query with a sliding window for the last 10 elements looks like follows: This stream continuously calculates the average value of "price" of the last 10 tuples, but only considers those tuples whose prices are greater than 100.0. In the next step, the declarative query is translated into a logical query plan. A query plan is a directed graph where the nodes are operators and the edges describe the processing flow. Each operator in the query plan encapsulates the semantic of a specific operation, such as filtering or aggregation. In DSMSs that process relational data streams, the operators are equal or similar to the operators of the Relational algebra, so that there are operators for selection, projection, join, and set operations. This operator concept allows the very flexible and versatile processing of a DSMS. === Optimization of queries === The logical query plan can be optimized, which strongly depends on the streaming model. The basic concepts for optimizing continuous queries are equal to those from database systems. If there are relational data streams and the logical query plan is based on relational operators from the Relational algebra, a query optimizer can use the algebraic equivalences to optimize the plan. These may be, for example, to push selection operators down to the sources, because they are not so computationally intensive like join operators. Furthermore, there are also cost-based optimization techniques like in DBMS, where a query plan with the lowest costs is chosen from different equivalent query plans. One example is to choose the order of two successive join operators. In DBMS this decision is mostly done by certain statistics of the involved databases. But, since the data of a data streams is unknown in advance, there are no such statistics in a DSMS. However, it is possible to observe a data stream for a certain time to obtain some statistics. Using these statistics, the query can also be optimized later. So, in contrast to a DBMS, some DSMS allows to optimize the query even during runtime. Therefore, a DSMS needs some plan migration strategies to replace a running query plan with a new one. === Transformation of queries === Since a logical operator is only responsible for the semantics of an operation but does not consist of any algorithms, the logical query plan must be transformed into an executable counterpart. This is called a physical query plan. The distinction between a logical and a physical operator plan allows more than one implementation for the same logical operator. The join, for example, is logically the same, although it can be implemented by different algorithms like a Nested loop join or a Sort-merge join. Notice, these algorithms also strongly depend on the used stream and processing model. Finally, the query is available as a physical query plan. === Execution of queries === Since the physical query plan consists of executable algorithms, it can be directly executed. For this, the physical query plan is installed into the system. The bottom of the graph (of the query plan) is connected to the incoming sources, which can be everything like connectors to sensors. The top of the graph is connected to the outgoing sinks, which may be for example a visualization. Since most DSMSs are data-driven, a query is executed by pushing the incoming data elements from the source through the query plan to the sink. Each time when a data element passes an operator, the operator performs its specific operation on the data element and forwards the result to all successive operators. == Examples == AURORA, StreamBase Systems, Inc. Archived 23 March 2009 at the Wayback Machine Hortonworks DataFlow IBM Streams NIAGARA Query Engine NiagaraST: A Research Data Stream Management System at Portland State University Odysseus, an open source Java-based framework for Data Stream Management Systems Pipeline DB PIPES Archived 24 December 2016 at the Wayback Machine, webMethods Business Events QStream SAS Event Stream Processing SQLstream STREAM StreamGlobe StreamInsight TelegraphCQ WSO2 Stream Processor

  Read more →