AI App Editing Video

AI App Editing Video — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Zeuthen strategy

    Zeuthen strategy

    The Zeuthen strategy in cognitive science is a negotiation strategy used by some artificial agents. Its purpose is to measure the willingness to risk conflict. An agent will be more willing to risk conflict if it does not have much to lose in case that the negotiation fails. In contrast, an agent is less willing to risk conflict when it has more to lose. The value of a deal is expressed in its utility. An agent has much to lose when the difference between the utility of its current proposal and the conflict deal is high. When both agents use the monotonic concession protocol, the Zeuthen strategy leads them to agree upon a deal in the negotiation set. This set consists of all conflict free deals, which are individually rational and Pareto optimal, and the conflict deal, which maximizes the Nash product. The strategy was introduced in 1930 by the Danish economist Frederik Zeuthen. == Three key questions == The Zeuthen strategy answers three open questions that arise when using the monotonic concession protocol, namely: Which deal should be proposed at first? On any given round, who should concede? In case of a concession, how much should the agent concede? The answer to the first question is that any agent should start with its most preferred deal, because that deal has the highest utility for that agent. The second answer is that the agent with the smallest value of Risk(i,t) concedes, because the agent with the lowest utility for the conflict deal profits most from avoiding conflict. To the third question, the Zeuthen strategy suggests that the conceding agent should concede just enough raise its value of Risk(i,t) just above that of the other agent. This prevents the conceding agent to have to concede again in the next round. == Risk == Risk ( i , t ) = { 1 U i ( δ ( i , t ) ) = 0 U i ( δ ( i , t ) ) − U i ( δ ( j , t ) ) U i ( δ ( i , t ) ) otherwise {\displaystyle {\text{Risk}}(i,t)={\begin{cases}1&U_{i}(\delta (i,t))=0\\{\frac {U_{i}(\delta (i,t))-U_{i}(\delta (j,t))}{U_{i}(\delta (i,t))}}&{\text{otherwise}}\end{cases}}} Risk(i,t) is a measurement of agent i's willingness to risk conflict. The risk function formalizes the notion that an agent's willingness to risk conflict is the ratio of the utility that agent would lose by accepting the other agent's proposal to the utility that agent would lose by causing a conflict. Agent i is said to be using a rational negotiation strategy if at any step t + 1 that agent i sticks to his last proposal, Risk(i,t) > Risk(j,t). == Sufficient concession == If agent i makes a sufficient concession in the next step, then, assuming that agent j is using a rational negotiation strategy, if agent j does not concede in the next step, he must do so in the step after that. The set of all sufficient concessions of agent i at step t is denoted SC(i, t). == Minimal sufficient concession == δ ′ = arg ⁡ max δ ∈ S C ( A , t ) { U A ( δ ) } {\displaystyle \delta '=\arg \max _{\delta \in {SC(A,t)}}\{U_{A}(\delta )\}} is the minimal sufficient concession of agent A in step t. Agent A begins the negotiation by proposing δ ( A , 0 ) = arg ⁡ max δ ∈ N S U A ( δ ) {\displaystyle \delta (A,0)=\arg \max _{\delta \in {NS}}U_{A}(\delta )} and will make the minimal sufficient concession in step t + 1 if and only if Risk(A,t) ≤ Risk(B,t). Theorem If both agents are using Zeuthen strategies, then they will agree on δ = arg ⁡ max δ ′ ∈ N S { π ( δ ′ ) } , {\displaystyle \delta =\arg \max _{\delta '\in {NS}}\{\pi (\delta ')\},} that is, the deal which maximizes the Nash product. Proof Let δA = δ(A,t). Let δB = δ(B,t). According to the Zeuthen strategy, agent A will concede at step t {\displaystyle t} if and only if R i s k ( A , t ) ≤ R i s k ( B , t ) . {\displaystyle Risk(A,t)\leq Risk(B,t).} That is, if and only if U A ( δ A ) − U A ( δ B ) U A ( δ A ) ≤ U B ( δ B ) − U B ( δ A ) U B ( δ B ) {\displaystyle {\frac {U_{A}(\delta _{A})-U_{A}(\delta _{B})}{U_{A}(\delta _{A})}}\leq {\frac {U_{B}(\delta _{B})-U_{B}(\delta _{A})}{U_{B}(\delta _{B})}}} U B ( δ B ) ( U A ( δ A ) − U A ( δ B ) ) ≤ U A ( δ A ) ( U B ( δ B ) − U B ( δ A ) ) {\displaystyle U_{B}(\delta _{B})(U_{A}(\delta _{A})-U_{A}(\delta _{B}))\leq U_{A}(\delta _{A})(U_{B}(\delta _{B})-U_{B}(\delta _{A}))} U A ( δ A ) U B ( δ B ) − U A ( δ B ) U B ( δ B ) ≤ U A ( δ A ) U B ( δ B ) − U A ( δ A ) U B ( δ A ) {\displaystyle U_{A}(\delta _{A})U_{B}(\delta _{B})-U_{A}(\delta _{B})U_{B}(\delta _{B})\leq U_{A}(\delta _{A})U_{B}(\delta _{B})-U_{A}(\delta _{A})U_{B}(\delta _{A})} − U A ( δ B ) U B ( δ B ) ≤ − U A ( δ A ) U B ( δ A ) {\displaystyle -U_{A}(\delta _{B})U_{B}(\delta _{B})\leq -U_{A}(\delta _{A})U_{B}(\delta _{A})} U A ( δ A ) U B ( δ A ) ≤ U A ( δ B ) U B ( δ B ) {\displaystyle U_{A}(\delta _{A})U_{B}(\delta _{A})\leq U_{A}(\delta _{B})U_{B}(\delta _{B})} π ( δ A ) ≤ π ( δ B ) {\displaystyle \pi (\delta _{A})\leq \pi (\delta _{B})} Thus, Agent A will concede if and only if δ A {\displaystyle \delta _{A}} does not yield the larger product of utilities. Therefore, the Zeuthen strategy guarantees a final agreement that maximizes the Nash Product.

    Read more →
  • Powerset construction

    Powerset construction

    In the theory of computation and automata theory, the powerset construction or subset construction is a standard method for converting a nondeterministic finite automaton (NFA) into a deterministic finite automaton (DFA) that recognizes the same formal language. It is important in theory because it establishes that NFAs, despite their additional flexibility, are unable to recognize any language that cannot be recognized by some DFA. It is also important in practice for converting easier-to-construct NFAs into more efficiently executable DFAs. However, if the NFA has n states, the resulting DFA may have up to 2n states, an exponentially larger number, which sometimes makes the construction impractical for large NFAs. The construction, sometimes called the Rabin–Scott powerset construction (or subset construction) to distinguish it from similar constructions for other types of automata, was first published by Michael O. Rabin and Dana Scott in 1959. == Intuition == To simulate the operation of a DFA on a given input string, one needs to keep track of a single state at any time: the state that the automaton will reach after seeing a prefix of the input. In contrast, to simulate an NFA, one needs to keep track of a set of states: all of the states that the automaton could reach after seeing the same prefix of the input, according to the nondeterministic choices made by the automaton. If, after a certain prefix of the input, a set S of states can be reached, then after the next input symbol x the set of reachable states is a deterministic function of S and x. Therefore, the sets of reachable NFA states play the same role in the NFA simulation as single DFA states play in the DFA simulation, and in fact the sets of NFA states appearing in this simulation may be re-interpreted as being states of a DFA. == Construction == The powerset construction applies most directly to an NFA that does not allow state transformations without consuming input symbols (aka: "ε-moves"). Such an automaton may be defined as a 5-tuple (Q, Σ, T, q0, F), in which Q is the set of states, Σ is the set of input symbols, T is the transition function (mapping a state and an input symbol to a set of states), q0 is the initial state, and F is the set of accepting states. The corresponding DFA has states corresponding to subsets of Q. The initial state of the DFA is {q0}, the (one-element) set of initial states. The transition function of the DFA maps a state S (representing a subset of Q) and an input symbol x to the set T(S,x) = ∪{T(q,x) | q ∈ S}, the set of all states that can be reached by an x-transition from a state in S. A state S of the DFA is an accepting state if and only if at least one member of S is an accepting state of the NFA. In the simplest version of the powerset construction, the set of all states of the DFA is the powerset of Q, the set of all possible subsets of Q. However, many states of the resulting DFA may be useless as they may be unreachable from the initial state. An alternative version of the construction creates only the states that are actually reachable. === NFA with ε-moves === For an NFA with ε-moves (also called an ε-NFA), the construction must be modified to deal with these by computing the ε-closure of states: the set of all states reachable from some given state using only ε-moves. Van Noord recognizes three possible ways of incorporating this closure computation in the powerset construction: Compute the ε-closure of the entire automaton as a preprocessing step, producing an equivalent NFA without ε-moves, then apply the regular powerset construction. This version, also discussed by Hopcroft and Ullman, is straightforward to implement, but impractical for automata with large numbers of ε-moves, as commonly arise in natural language processing application. During the powerset computation, compute the ε-closure { q ′ | q → ε ∗ q ′ } {\displaystyle \{q'~|~q\to _{\varepsilon }^{}q'\}} of each state q that is considered by the algorithm (and cache the result). During the powerset computation, compute the ε-closure { q ′ | ∃ q ∈ Q ′ , q → ε ∗ q ′ } {\displaystyle \{q'~|~\exists q\in Q',q\to _{\varepsilon }^{}q'\}} of each subset of states Q' that is considered by the algorithm, and add its elements to Q'. === Multiple initial states === If NFAs are defined to allow for multiple initial states, the initial state of the corresponding DFA is the set of all initial states of the NFA, or (if the NFA also has ε-moves) the set of all states reachable from initial states by ε-moves. == Example == The NFA below has four states; state 1 is initial, and states 3 and 4 are accepting. Its alphabet consists of the two symbols 0 and 1, and it has ε-moves. The initial state of the DFA constructed from this NFA is the set of all NFA states that are reachable from state 1 by ε-moves; that is, it is the set {1,2,3}. A transition from {1,2,3} by input symbol 0 must follow either the arrow from state 1 to state 2, or the arrow from state 3 to state 4. Additionally, neither state 2 nor state 4 have outgoing ε-moves. Therefore, T({1,2,3},0) = {2,4}, and by the same reasoning the full DFA constructed from the NFA is as shown below. As can be seen in this example, there are five states reachable from the start state of the DFA; the remaining 11 sets in the powerset of the set of NFA states are not reachable. == Complexity == Because the DFA states consist of sets of NFA states, an n-state NFA may be converted to a DFA with at most 2n states. For every n, there exist n-state NFAs such that every subset of states is reachable from the initial subset, so that the converted DFA has exactly 2n states, giving Θ(2n) worst-case time complexity. A simple example requiring nearly this many states is the language of strings over the alphabet {0,1} in which there are at least n characters, the nth from last of which is 1. It can be represented by an (n + 1)-state NFA, but it requires 2n DFA states, one for each n-character suffix of the input; cf. picture for n=4. == Applications == Brzozowski's algorithm for DFA minimization uses the powerset construction, twice. It converts the input DFA into an NFA for the reverse language, by reversing all its arrows and exchanging the roles of initial and accepting states, converts the NFA back into a DFA using the powerset construction, and then repeats its process. Its worst-case complexity is exponential, unlike some other known DFA minimization algorithms, but in many examples it performs more quickly than its worst-case complexity would suggest. Safra's construction, which converts a non-deterministic Büchi automaton with n states into a deterministic Muller automaton or into a deterministic Rabin automaton with 2O(n log n) states, uses the powerset construction as part of its machinery.

    Read more →
  • Datacap

    Datacap

    Datacap (an IBM Company), a privately owned company, manufactures and sells computer software, and services. Datacap's first product, Paper Keyboard, was a "forms processing" product and shipped in 1989. In August 2010, IBM announced that it had acquired Datacap for an undisclosed amount. == Overview == Datacap sells products through a value-added distribution network worldwide. The software is classified as "enterprise software", meaning that it requires trained professionals to install and configure. Although the Company has focused on providing solutions for scanning paper documents, most recently Company materials have emphasized customer requirements to handle electronic documents ("eDocs"), documents being received into an organization electronically (usually email). Datacap claims that its software is unique because of the rules engine ("Rulerunner") used for processing inbound documents, including performing the image processing (deskew, noise removal, etc.), optical character recognition (OCR), intelligent character recognition (ICR), validations, and export-release formatting of extracted data to target ERP and line of business application.

    Read more →
  • AI Humanizers: Free vs Paid (2026)

    AI Humanizers: Free vs Paid (2026)

    Trying to pick the best AI humanizer? An AI humanizer is software that uses machine learning to help you get more done — it scales effortlessly from a single task to thousands. The best picks balance beginner-friendly simplicity with the depth power users need, and they ship updates often. Whether you are a beginner or a pro, the right AI humanizer slots into your workflow and pays for itself fast. This guide breaks down the top picks, their pros and cons, and who each one is best for.

    Read more →
  • Bump (application)

    Bump (application)

    Bump was an iOS and Android mobile app that enabled smartphone users to transfer contact information, photos and files between devices. In 2011, it was #8 on Apple's list of all-time most popular free iPhone apps, and by February 2013 it had been downloaded 125 million times. Its developer, Bump Technologies, shut down the service and discontinued the app on January 31, 2014, after being acquired by Google for Google Photos and Android Camera. == Features == Bump sent contact information, photos and files to another device over the internet. Before activating the transfer, each user confirmed what they want to send to the other user. To initiate a transfer, two people physically bumped their phones together. A screen appeared on both users' smartphone displays, allowing them to confirm what they want to send to each other. When two users bumped their phones, software on the phones send a variety of sensor data to an algorithm running on Bump servers, which included the location of the phone, accelerometer readings, IP address, and other sensor readings. The algorithm figured out which two phones felt the same physical bump and then transfers the information between those phones. Bump did not use Near Field Communication. February 2012 release of Bump 3.0 for iOS, the company streamlined the app to focus on its most frequently used features: contact and photo sharing. Bump 3.0 for Android maintained the features eliminated from the iOS version but moved them behind swipeable layers. In May 2012, a Bump update enabled users to transfer photos from their phone to their computer via a web service. To initiate a transfer, the user goes to the Bump website on their computer and bumps the smartphone on the computer keyboard's space bar. By December 2012, various Bump updates for iOS and Android had added the abilities to share video, audio, and any files. Users swipe to access those features. In February 2013, an update to the Bump iOS and Android apps enabled users to transfer photos, videos, contacts and other files from a computer to a smartphone and vice versa via a web service. To perform the transfer, users went to the Bump website on their computer and bump the smartphone on the computer keyboard's space bar. == History == The underlying idea of a synchronous gesture like bumping two devices for content transfer or pairing them was first conceived by Ken Hinkley of Microsoft Research in 2003. This idea was presented at a user interface and technology conference that same year. The paper proposed the use of accelerometers and a bumping gesture of two devices to enable communication, screen sharing and content transfer between them. Similar to this original concept, the idea for Bump app was conceived by David Lieb, a former employee of Texas Instruments, while he was attending the University of Chicago Booth School of Business for his MBA. While going through the orientation and meeting process of business school, he became frustrated by constantly entering contact information into his iPhone and felt that the process could be improved. His fellow Texas Instruments employees Andy Huibers and Jake Mintz, who was a classmate of Lieb's at the University of Chicago's MBA program, joined Lieb to form Bump Technologies. Bump Technologies launched in 2008 and is located in Mountain View, CA. Early funding for the project was provided by startup incubator Y Combinator, Sequoia Capital and other angel investors. It gained attention at the CTIA international wireless conference, due to its accessibility and novelty factor. In October 2009, Bump received $3.4m in Series A funding followed in January 2011 with a $16m series B financing round led by Andreessen Horowitz. Silicon Valley venture capitalist Marc Andreessen sits on the company's board. The Bump app debuted in the Apple iOS App Store in March 2009 and was “one of the apps that helped to define the iPhone” (Harry McCracken, Technologizer). It soon became the billionth download on Apple's App Store. An Android version launched in November 2009. By the time Bump 3.0 for iOS was released in February 2012, the app had been installed 77 million times, with users sharing more than 2 million photos daily. As of February 2013, there had been 125 million Bump app downloads. == Other apps created by Bump Technologies == Bump Technologies worked with PayPal in March 2010 to create a PayPal iPhone application. The application, which allows two users to automatically activate an Internet transfer of money between their accounts, found widespread adoption. A similar version was released for Android in August 2010. The Bump capability in PayPal's apps was removed in March 2012. At that time, Bump Technologies released Bump Pay, an iOS app that lets users transfer money via PayPal by physically bumping two smartphones together. The tool was originally created for the Bump team to use when splitting up restaurant bills. The payment feature was not added to the Bump app because the company “wanted to make it as simple as possible so people understand how this works,” Lieb told ABC News. Bump Pay was the first app from the company's Bump Labs initiative. A goal of Bump Labs is to test new app ideas that may not fit within the main Bump app. ING Direct added a feature to its iPhone app in 2011 that lets users transfer money to each other using Bump's technology. The feature was later added to its Android app, now called Capital One 360. In July 2012, Bump Technologies released Flock, an iPhone photo sharing app. An Android version was released in December 2012. Using geolocation data embedded in photos and a user's Facebook connections, Flock finds pictures the user takes while out with friends and family and puts everyone's photos from that event into a single shared album. Users receive a push notification after the event, asking if they want to share their photos with friends who were there in the moment. The app will also scan previous photos in the iPhone camera roll and uncover photos that have yet to be shared. If location services were enabled at the time a photo was taken, Flock allows users to create an album of photos from the past with the friends who were there with them. == Acquisition by Google == On September 16, 2013, Bump Technologies announced that it had been acquired by Google. On December 31, 2013, they broke the news that both Bump and Flock would be discontinued so that the team could focus on new projects at Google. The apps were removed from the App Store and Google Play on January 31, 2014. The company subsequently deleted all user data and shut down their servers, thus rendering existing installations of the apps inoperable.

    Read more →
  • Lübke English

    Lübke English

    The term Lübke English (or, in German, Lübke-Englisch) refers to nonsensical English created by literal word-by-word translation of German phrases, disregarding differences between the languages in syntax and meaning. Lübke English is named after Heinrich Lübke, a president of Germany in the 1960s, whose limited English made him a target of German humorists. In 2006, the German magazine konkret revealed that most of the statements ascribed to Lübke were in fact invented by the editorship of Der Spiegel, mainly by staff writer Ernst Goyke and subsequent letters to the editor. In the 1980s, comedian Otto Waalkes had a routine called "English for Runaways", which is a nonsensical literal translation of Englisch für Fortgeschrittene (actually an idiom for 'English for advanced speakers' in German – note that fortschreiten divides into fort, meaning "away" or "forward", and schreiten, meaning "to walk in steps"). In this mock "course", he translates every sentence back or forth between English and German at least once (usually from German literally into English). Though there are also other, more complex language puns, the title of this routine has gradually replaced the term Lübke English when a German speaker wants to point out naive literal translations.

    Read more →
  • Is an AI Virtual Assistant Worth It in 2026?

    Is an AI Virtual Assistant Worth It in 2026?

    Shopping for the best AI virtual assistant? An AI virtual assistant is software that uses machine learning to help you get more done — it keeps getting smarter as the underlying models improve. Pricing, accuracy, and the size of the model behind the tool are the three factors that most affect daily usefulness. Whether you are a beginner or a pro, the right AI virtual assistant slots into your workflow and pays for itself fast. Below we compare features, pricing, and real output so you can choose with confidence.

    Read more →
  • Jiaya Jia

    Jiaya Jia

    Jiaya Jia (Chinese: 贾佳亚) is a Chair Professor of the Department of Computer Science and Engineering at The Hong Kong University of Science and Technology (HKUST). He is an IEEE Fellow, the associate editor-in-chief of one of IEEE’s flagship and premier journals- Transactions on Pattern Analysis and Machine Intelligence (TPAMI), as well as on the editorial board of International Journal of Computer Vision (IJCV). == Early life and education == Jiaya Jia joined CUHK in 2004 as an assistant professor, and was promoted to full professor in 2015. He obtained his PhD degree in computer science jointly from Hong Kong University of Science and Technology and Microsoft Research in 2004. From March 2003 to August 2004, he was a visiting scholar at Microsoft. He conducted collaborative research at Adobe Research in 2007. == Career == Jiaya Jia is a distinguished scientist in the fields of computer vision and artificial intelligence. His research team at HKUST, DV Lab, is one of the largest vision AI research teams in the world and has been making significant contribution to advanced development of computer vision algorithms and technologies with focuses on image/video understanding, detection and segmentation, multi-modal AI, computational imaging, practical optimization, and advanced learning for visual content since 2000. Jiaya Jia has published 200+ top papers and was cited 80,000+ times on Google Scholar with H-Index 110+. 40+ PhDs and fellows from this group are now active in academia and industry, and have become prominent AI tech leaders as professors, directors in major research labs, and founders of several successful startups. Jiaya Jia assumes the position of associate editor-in-chief of IEEE Transactions on Pattern Analysis and Machine Intelligence (TPAMI) since 2021. He is also on the editorial board of International Journal of Computer Vision (IJCV). Jiaya Jia has served as the area chair of ICCV, CVPR, AAAI, ECCV, and several other premium international AI conferences for years. He was on program committees of major conferences in graphics and computational imaging, including ICCP, SIGGRAPH, and SIGGRAPH Asia. == Research == The research areas of Jiaya Jia are computer vision, large X models, and deep learning. Jiaya Jia has made outstanding contributions to computer vision technology, algorithms and engineering, and is among the world's leading experts in the field. His research partners include numerous renowned multinational technology companies, such as Microsoft, Qualcomm, Adobe, Intel, NVIDIA, Amazon, and Lenovo. Jia has cultivated a number of outstanding talents with Master's and PhDs who continue to engage in scientific research and development in computer vision. Many technologies in image analysis and processing developed by Jiaya Jia are still leading in the field worldwide. Wherein, his achievements in image deblurring, filtering, image sparse processing, multi-band image signal fusion and enhancement, large range motion estimation, texture and structure-based layering, etc. have been published in the industry's most influential conferences and publications, and implemented in the real-world applications. These achievements have demonstrated outstanding performance in established systems, and most of which are open source so as to enable wider applications across industries such as aviation, medical imaging, safety management, robotic design, meteorological analysis and many more. == Selected publications == In his over 20 years of research experience, Jiaya Jia has published 200+ top papers that have been cited more than 80,000 times. According to HKUST Website in August 2024, Jiaya Jia has accumulatively published over 200 scientific papers in books, journals and conferences, such as IEEE Transactions on Pattern Analysis and Machine Intelligence (TPAMI), International Journal of Computer Vision (IJCV) "Computer Vision and Pattern Recognition (CVPR)", and "International Conference on Computer Vision (ICCV)". Representative papers include: Jiaya Jia: Mathematical Models and Practical Solvers for Uniform Motion Deblurring (in Motion Deblurring: Algorithms and Systems), Cambridge University Press, ISBN 9781107044364, 2014; Jiaya Jia: “Matte Extraction” Book: Computer Vision - A Reference Guide, Springer, ISBN 9780387307718 Editor-in-chief: Ikeuchi, Katsushi; Jiaya Jia, Chi-Keung Tang:Image Stitching Using Structure Deformation,IEEE Transactions on Pattern Analysis and Machine Intelligence (TPAMI), Vol. 30, No. 4, 2008; Jiaya Jia, Jian Sun, Chi-Keung Tang, Heung-Yeung Shum:Drag-and-Drop Pasting,ACM Transactions on Graphics (also in SIGGRAPH 2006), Vol. 25, No. 3, 2006. Xiaojuan Qi, Zheng zhe Liu, Renjie Liao, Philip HS Torr, Raquel Urtasun, Jiaya Jia:GeoNet++: Iterative Geometric Neural Network with Edge-Aware Refinement for Joint Depth and Surface Normal Estimation,IEEE Transactions on Pattern Analysis and Machine Intelligence (TPAMI). Accepted. == Selected honors and awards == ACM Fellow. 1st Place of WAD Drivable Area Segmentation Challenge 2018; 1st Place of LSUN'17 Instance and Semantic Segmentation Challenges; 1st Place of COCO Instance Segmentation Challenge 2017; 2nd Place in COCO Detection Challenge 2017; 1st Place of ImageNet Scene Parsing Challenge 2016 with the paper PSPNet presented in CVPR 2017.

    Read more →
  • Image formation

    Image formation

    The study of image formation encompasses the radiometric and geometric processes by which 2D images of 3D objects are formed. In the case of digital images, the image formation process also includes analog to digital conversion and sampling. == Imaging == The imaging process is a mapping of an object to an image plane. Each point on the image corresponds to a point on the object. An illuminated object will scatter light toward a lens and the lens will collect and focus the light to create the image. The ratio of the height of the image to the height of the object is the magnification. The spatial extent of the image surface and the focal length of the lens determines the field of view of the lens. Image formation of mirror these have a center of curvature and its focal length of the mirror is half of the center of curvature. == Illumination == An object may be illuminated by the light from an emitting source such as the sun, a light bulb or a Light Emitting Diode. The light incident on the object is reflected in a manner dependent on the surface properties of the object. For rough surfaces, the reflected light is scattered in a manner described by the Bi-directional Reflectance Distribution Function (BRDF) of the surface. The BRDF of a surface is the ratio of the exiting power per square meter per steradian (radiance) to the incident power per square meter (irradiance). The BRDF typically varies with angle and may vary with wavelength, but a specific important case is a surface that has constant BRDF. This surface type is referred to as Lambertian and the magnitude of the BRDF is R/π, where R is the reflectivity of the surface. The portion of scattered light that propagates toward the lens is collected by the entrance pupil of the imaging lens over the field of view. == Field of view and imagery == The Field of view of a lens is limited by the size of the image plane and the focal length of the lens. The relationship between a location on the image and a location on the object is y = ftan(θ), where y is the max extent of the image plane, f is the focal length of the lens and θ is the field of view. If y is the max radial size of the image then θ is the field of view of the lens. While the image created by a lens is continuous, it can be modeled as a set of discrete field points, each representing a point on the object. The quality of the image is limited by the aberrations in the lens and the diffraction created by the finite aperture stop. == Pupils and stops == The aperture stop of a lens is a mechanical aperture which limits the light collection for each field point. The entrance pupil is the image of the aperture stop created by the optical elements on the object side of the lens. The light scattered by an object is collected by the entrance pupil and focused onto the image plane via a series of refractive elements. The cone of the focused light at the image plane is set by the size of the entrance pupil and the focal length of the lens. This is often referred to as the f-stop or f-number of the lens. f/# = f/D where D is the diameter of the entrance pupil. == Pixelation and color vs. monochrome == In typical digital imaging systems, a sensor is placed at the image plane. The light is focused on to the sensor and the continuous image is pixelated. The light incident on each pixel in the sensor will be integrated within the pixel and a proportional electronic signal will be generated. The angular geometric resolution of a pixel is given by atan(p/f), where p is the pitch of the pixel. This is also called the pixel field of view. The sensor may be monochrome or color. In the case of a monochrome sensor, the light incident on each pixel is integrated and the resulting image is a grayscale like picture. For color images, a mosaic color filter is typically placed over the pixels to create a color image. An example is a Bayer filter. The signal incident on each pixel is then digitized to a bit stream. == Image quality == The quality of an image is dependent upon both geometric and physical items. Geometrically, higher density of pixels across an image will give less blocky pixelation and thus a better geometric image quality. Lens aberrations also contribute to the quality of the image. Physically, diffraction due to the aperture stop will limit the resolvable spatial frequencies as a function of f-number. In the frequency domain, Modulation Transfer Function (MTF) is a measure of the quality of the imaging system. The MTF is a measure of the visibility of a sinusoidal variation in irradiance on the image plane as a function of the frequency of the sinusoid. It includes the effects of diffraction, aberrations and pixelation. For the lens, the MTF is the autocorrelation of the pupil function, so it accounts for the finite pupil extent and the lens aberrations. The sensor MTF is the Fourier Transform of the pixel geometry. For a square pixel, MTF(ξ) = sin(πξp)/πξp where p is the pixel width and ξ is the spatial frequency. The MTF of the combination of the lens and detector is the product of the two component MTFs. == Perception == Color images can be perceived via two means. In the case of computer vision the light incident on the sensor comprises the image. In the case of visual perception, the human eye has a color dependent response to light so this must be accounted for. This is important consideration when converting to grayscale. == Image formation in eye == The principal difference between the lens of the eye and an ordinary optical lens is that the former is flexible. The radius of the curvature of the anterior surface of the lens is greater than the radius of its posterior surface. The shape of the lens is controlled by tension in the fibers of the ciliary body. To focus on distant objects, the controlling muscles cause the lens to be relatively flattened. Similarly, these muscles allow the lens to become thicker in order to focus on objects near the eye. The distance between the center of the lens and the retina (focal length) varies from approximately 17 mm to about 14 mm, as the refractive power of the lens increases from its minimum to its maximum. When the eye focuses on an object farther away than about 3 m, the lens exhibits its lowest refractive power. When the eye focuses on a close object, the lens is most strongly refractive.

    Read more →
  • Best AI Sales Assistants in 2026

    Best AI Sales Assistants in 2026

    Shopping for the best AI sales assistant? An AI sales assistant is software that uses machine learning to help you get more done — it keeps getting smarter as the underlying models improve. Pricing, accuracy, and the size of the model behind the tool are the three factors that most affect daily usefulness. Whether you are a beginner or a pro, the right AI sales assistant slots into your workflow and pays for itself fast. We tested the leading options and ranked them by quality, value, and ease of use.

    Read more →
  • Top 10 AI Text-to-image Tools Compared (2026)

    Top 10 AI Text-to-image Tools Compared (2026)

    Comparing the best AI text-to-image tool? An AI text-to-image tool is software that uses machine learning to help you get more done — it lowers the barrier so anyone can produce professional output. Privacy matters too: check whether your data trains the model and whether a no-log or enterprise tier is available. Whether you are a beginner or a pro, the right AI text-to-image tool slots into your workflow and pays for itself fast. Below we compare features, pricing, and real output so you can choose with confidence.

    Read more →
  • Top 10 AI Resume Builders Compared (2026)

    Top 10 AI Resume Builders Compared (2026)

    In search of the best AI resume builder? An AI resume builder is software that uses machine learning to help you get more done — it turns a rough idea into a polished result in seconds. When choosing one, weigh output quality, pricing, export formats, and how well it fits the tools you already use. Whether you are a beginner or a pro, the right AI resume builder slots into your workflow and pays for itself fast. We tested the leading options and ranked them by quality, value, and ease of use.

    Read more →
  • Application Lifecycle Framework

    Application Lifecycle Framework

    The Application Lifecycle Framework (ALF) was a project by the Eclipse Foundation that aimed to create a standardized, open-source system to allow different application lifecycle management (ALM) tools to work together more easily. The goal was to provide common protocols and integration services that would let software development tools from different vendors communicate and share data. However, the project failed to gain sufficient support from major industry players and was terminated in 2008.

    Read more →
  • FastText

    FastText

    fastText is a library for learning of word embeddings and text classification created by Facebook's AI Research (FAIR) lab. The model allows one to create an unsupervised learning or supervised learning algorithm for obtaining vector representations for words. Facebook makes available pretrained models for 294 languages. Several papers describe the techniques used by fastText. The GitHub repository was archived on March 19, 2024.

    Read more →
  • Julie Beth Lovins

    Julie Beth Lovins

    Julie Beth Lovins (October 19, 1945, in Washington, D.C. – January 26, 2018, in Mountain View, California) was a computational linguist who published The Lovins Stemming Algorithm - a type of stemming algorithm for word matching - in 1968. The Lovins Stemmer is a single pass, context sensitive stemmer, which removes endings based on the longest-match principle. The stemmer was the first to be published and was extremely well developed considering the date of its release, having been the main influence on a large amount of the future work in the area. -Adam G., et al == Background == Born on October 19, 1945, in Washington, D.C., Lovins grew up in Amherst, Massachusetts. Her father Gerald H. Lovins was an engineer and her mother, Miriam Lovins, a social services administrator. Lovins' brother Amory Lovins is the co-founder and chief environmental scientist of Rocky Mountain Institute. For her undergraduate degree, Lovins attended Pembroke College, the women's college of Brown University, which later combined into Brown University in 1971. At Pembroke College, Lovins studied mathematics and linguistics, graduating with honors. Her thesis was named, A Study of Idioms. She received the inaugural Bloch Fellowship in 1970 from the Linguistic Society of America to attend graduate school. Lovins obtained her Master of Arts in 1970 and Doctor of Philosophy in 1973 from the University of Chicago, studying linguistics. At the University of Chicago, her dissertation was titled, Loan Phonology -- Subject Matter. A revision of her thesis on loanwords and the phonological structure of Japanese was published in 1975 by the Indiana University Linguistics Club. == Teaching career == Following Lovins' PhD, she spent a year working as a linguist-at-large at a University of Tokyo language research institute and as an English conversation teacher. She then joined the faculty at Tsuda College as a professor of English and linguistics, where she taught for seven years. During her time as a faculty member at Tsuda College, Lovins also served as a guest researcher in the University of Tokyo's Research Institute of Logopedics and Phoniatrics, a research center for speech science. == Industry career == After teaching Japanese phonology at Japanese universities abroad, Lovins moved back to the U.S. to work in the computing industry. She worked on early speech synthesis at Bell Labs in Murray Hill, New Jersey. At Bell Labs, Lovins worked with Osamu Fujimura, a Japanese linguist who is credited as a pioneer in speech sciences. Lovins also worked as a software engineer at various companies in Silicon Valley and served as a consultant for computational linguistics throughout the 1990s. As a consultant, she called her business, "The Language Doctor." == The Lovins Stemming Algorithm == Lovins published an article about her work on developing a stemming algorithm through the Research Laboratory of Electronics at MIT in 1968. Lovins' stemming algorithm is frequently referred to as the Lovins stemmer. A stemming algorithm is the process of taking a word with suffixes and reducing it to its root, or base word. Stemming algorithms are used to improve the accuracy in information retrieval and in domain analysis. These algorithms help find variants of the terms being queried. Stemming algorithms bring value in their reduction of a given query into its less complex form, allowing more similar documents to be retrieved for similar queries. Stemming algorithms are prevalent in search engines, such as Google Search, which did not implement word stemming until 2003. This means that up until 2003, a Google search for the word warm would not have explicitly returned results for related words like warmth or warming. As the first published stemming algorithm, Lovins' work set a precedent and influenced future work in stemming algorithms, such as the Porter Stemmer published by Martin Porter in 1980 which has been recognized widely as the most common stemming algorithm for stemming English. Additionally, the Dawson Stemmer developed by John Dawson is an extension of the Lovins stemmer. The Lovins stemmer follows a rule-based affix elimination approach. It first removes the longest identifiable suffix from the target word - producing a base stem word - then indexes a lookup table to convert the (potentially malformed) stem word to a valid word. This process can be split into two phases. In the first phase, a word is compared with a pre-determined list of endings, and when a word is found to contain one of these endings, the ending is removed, leaving only the stem of the word. The second phase standardizes spelling exceptions that come from the first phase, ensuring that words with only marginally varying stems are appropriately paired together. For example, with the word dried, phase one results in dri, which should match with the word dry. The second phase takes care of these exceptions. Compared to other stemmers, Lovins' algorithm is fast and equipped to handle irregular plural words like person and people. Disadvantages, however, include many suffixes not being available in the table of endings. Furthermore, it is sometimes highly unreliable and frequently fails to form valid words from the stems or to match the stems of like-meaning words. This is most often caused by the usage of specialist terminology and domain-specific vocabulary by the author. == Personal life == Lovins moved to Mountain View, California, in 1979, and later to Old Mountain View in 1981 with her partner and later husband Greg Fowler, a software engineer and advocate for environmental issues & the blind. In their free time, she and her husband enjoyed taking walks and volunteering for their local community. Lovins actively volunteered for organizations like the Old Mountain View Neighborhood Association, Mountain View Friends of the Library, League of Women Voters, Mountain View Cool Cities Team, and the Mountain View Sustainability Task Force. In 2016, Lovins' husband died unexpectedly, following a heart attack. Eighteen days after her husband died, Lovins was diagnosed with brain cancer. She died on January 26, 2018, at a hospice, surrounded by friends, family and caregivers.

    Read more →