AI Art For Sale — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.
Face Swap Live is a mobile app created by Laan Labs that enables users to swap faces with another person in real-time using the device's camera. It was released on December 14, 2015. In addition to swapping faces with another person, the app enables users to create videos using a set of bundled live filters. The app is available on iOS and Android devices. Face Swap Live was named Apple's #2 best-selling paid app in 2016.
Read more →
A Hindley–Milner (HM) type system is a classical type system for the lambda calculus with parametric polymorphism. It is also known as Damas–Milner or Damas–Hindley–Milner. It was first described by J. Roger Hindley and later rediscovered by Robin Milner. Luis Damas contributed a close formal analysis and proof of the method in his PhD thesis. Among HM's more notable properties are its completeness and its ability to infer the most general type of a given program without programmer-supplied type annotations or other hints. Algorithm W is an efficient type inference method in practice and has been successfully applied on large code bases, although it has a high theoretical complexity. HM is preferably used for functional programming languages. It was first implemented as part of the type system of the programming language ML. Since then, HM has been extended in various ways, most notably with type class constraints like those in Haskell. == Introduction == As a type inference method, Hindley–Milner is able to deduce the types of variables, expressions and functions from programs written in an entirely untyped style. Being scope sensitive, it is not limited to deriving the types only from a small portion of source code, but rather from complete programs or modules. Being able to cope with parametric types, too, it is core to the type systems of many functional programming languages. It was first applied in this manner in the ML programming language. The origin is the type inference algorithm for the simply typed lambda calculus that was devised by Haskell Curry and Robert Feys in 1958. In 1969, J. Roger Hindley extended this work and proved that their algorithm always inferred the most general type. In 1978, Robin Milner, independently of Hindley's work, provided an equivalent algorithm, Algorithm W. In 1982, Luis Damas finally proved that Milner's algorithm is complete and extended it to support systems with polymorphic references. === Monomorphism vs. polymorphism === In the simply typed lambda calculus, types T are either atomic type constants or function types of form T → T {\displaystyle T\rightarrow T} . Such types are monomorphic. Typical examples are the types used in arithmetic values: 3 : N u m b e r a d d 3 4 : N u m b e r a d d : N u m b e r → N u m b e r → N u m b e r {\displaystyle {\begin{array}{ll}3&:{\mathtt {Number}}\\{\mathtt {add}}\ 3\ 4&:{\mathtt {Number}}\\{\mathtt {add}}&:{\mathtt {Number}}\rightarrow {\mathtt {Number}}\rightarrow {\mathtt {Number}}\end{array}}} Contrary to this, the untyped lambda calculus is neutral to typing at all, and many of its functions can be meaningfully applied to all type of arguments. The trivial example is the identity function i d ≡ λ x . x {\displaystyle {\mathtt {id}}\equiv \lambda x.x} which simply returns whatever value it is applied to. Less trivial examples include parametric types like lists. While polymorphism in general means that operations accept values of more than one type, the polymorphism used here is parametric. One finds the notation of type schemes in the literature, too, emphasizing the parametric nature of the polymorphism. Additionally, constants may be typed with (quantified) type variables. For example, the following type schemes quantify universally over α {\displaystyle \alpha } , meaning that they are true for all possible α {\displaystyle \alpha } : c o n s : ∀ α . α → L i s t α → L i s t α n i l : ∀ α . L i s t α i d : ∀ α . α → α {\displaystyle {\begin{array}{ll}{\mathtt {cons}}&:\forall \alpha .\alpha \rightarrow {\mathtt {List}}\ \alpha \rightarrow {\mathtt {List}}\ \alpha \\{\mathtt {nil}}&:\forall \alpha .{\mathtt {List}}\ \alpha \\{\mathtt {id}}&:\forall \alpha .\alpha \rightarrow \alpha \end{array}}} Polymorphic types can become monomorphic by consistent substitution of their variables. Examples of monomorphic instances are: i d ′ : S t r i n g → S t r i n g n i l ′ : L i s t N u m b e r {\displaystyle {\begin{array}{ll}{\mathtt {id}}'&:{\mathtt {String}}\rightarrow {\mathtt {String}}\\{\mathtt {nil}}'&:{\mathtt {List}}\ {\mathtt {Number}}\end{array}}} More generally, types are polymorphic when they contain type variables, while types without them are monomorphic. Contrary to the type systems used for example in Pascal (1970) or C (1972), which only support monomorphic types, HM is designed with emphasis on parametric polymorphism. The successors of the languages mentioned, like C++ (1985), focused on different types of polymorphism, namely subtyping in connection with object-oriented programming and overloading. While subtyping is incompatible with HM, a variant of systematic overloading is available in the HM-based type system of Haskell. === Let-polymorphism === When extending the type inference for the simply-typed lambda calculus towards polymorphism, one has to decide whether assigning a polymorphic type not only as type of an expression, but also as the type of a λ-bound variable is admissible. This would allow the generic identity type to be assigned to the variable 'id' in: (λ id . ... (id 3) ... (id "text") ... ) (λ x . x) Allowing this gives rise to the polymorphic lambda calculus; however, type inference in this system is not decidable. Instead, HM distinguishes variables that are immediately bound to an expression from more general λ-bound variables, calling the former let-bound variables, and allows polymorphic types to be assigned only to these. This leads to let-polymorphism where the above example takes the form let id = λ x . x in ... (id 3) ... (id "text") ... which can be typed with a polymorphic type for 'id'. As indicated, the expression syntax is extended to make the let-bound variables explicit, and by restricting the type system to allow only let-bound variable to have polymorphic types, while the parameters in lambda-abstractions must get a monomorphic type, type inference becomes decidable. == Overview == The remainder of this article proceeds as follows: The HM type system is defined. This is done by describing a deduction system that makes precise what expressions have what type, if any. From there, it works towards an implementation of the type inference method. After introducing a syntax-driven variant of the above deductive system, it sketches an efficient implementation (algorithm J), appealing mostly to the reader's metalogical intuition. Because it remains open whether algorithm J indeed realises the initial deduction system, a less efficient implementation (algorithm W), is introduced and its use in a proof is hinted. Finally, further topics related to the algorithm are discussed. The same description of the deduction system is used throughout, even for the two algorithms, to make the various forms in which the HM method is presented directly comparable. == The Hindley–Milner type system == The type system can be formally described by syntax rules that fix a language for the expressions, types, etc. The presentation here of such a syntax is not too formal, in that it is written down not to study the surface grammar, but rather the depth grammar, and leaves some syntactical details open. This form of presentation is usual. Building on this, typing rules are used to define how expressions and types are related. As before, the form used is a bit liberal. === Syntax === The expressions to be typed are exactly those of the lambda calculus extended with a let-expression as shown in the adjacent table. Parentheses can be used to disambiguate an expression. The application is left-binding and binds stronger than abstraction or the let-in construct. Types are syntactically split into two groups, monotypes and polytypes. ==== Monotypes ==== Monotypes always designate a particular type. Monotypes τ {\displaystyle \tau } are syntactically represented as terms. Examples of monotypes include type constants like i n t {\displaystyle {\mathtt {int}}} or s t r i n g {\displaystyle {\mathtt {string}}} , and parametric types like M a p ( S e t s t r i n g ) i n t {\displaystyle {\mathtt {Map\ (Set\ string)\ int}}} . The latter types are examples of applications of type functions, for example, from the set { M a p 2 , S e t 1 , s t r i n g 0 , i n t 0 , → 2 } {\displaystyle \{{\mathtt {Map^{2},\ Set^{1},\ string^{0},\ int^{0}}},\ \rightarrow ^{2}\}} , where the superscript indicates the number of type parameters. The complete set of type functions C {\displaystyle C} is arbitrary in HM, except that it must contain at least → 2 {\displaystyle \rightarrow ^{2}} , the type of functions. It is often written in infix notation for convenience. For example, a function mapping integers to strings has type i n t → s t r i n g {\displaystyle {\mathtt {int}}\rightarrow {\mathtt {string}}} . Again, parentheses can be used to disambiguate a type expression. The application binds stronger than the infix arrow, which is right-binding. Type variables are admitted as monotypes. Monotypes are not to be confused with monomorphic types, which exc
Read more →
UI data binding is a software design pattern to simplify development of GUI applications. UI data binding binds UI elements to an application domain model. Most frameworks employ the Observer pattern as the underlying binding mechanism. To work efficiently, UI data binding has to address input validation and data type mapping. A bound control is a widget whose value is tied or bound to a field in a recordset (e.g., a column in a row of a table). Changes made to data within the control are automatically saved to the database when the control's exit event triggers. == Example == == Data binding frameworks and tools == === Delphi === DSharp third-party data binding tool OpenWire Visual Live Binding - third-party visual data binding tool === Java === JFace Data Binding JavaFX Property === .NET === Windows Forms data binding overview WPF data binding overview Avalonia Unity 3D data binding framework (available in modifications for NGUI, iGUI and EZGUI libraries) === JavaScript === Angular AngularJS Backbone.js Ember.js Datum.js knockout.js Meteor, via its Blaze live update engine OpenUI5 React Vue.js
Read more →
Token-based replay technique is a conformance checking algorithm that checks how well a process conforms with its model by replaying each trace on the model (in Petri net notation ). Using the four counters produced tokens, consumed tokens, missing tokens, and remaining tokens, it records the situations where a transition is forced to fire and the remaining tokens after the replay ends. Based on the count at each counter, we can compute the fitness value between the trace and the model. == The algorithm == Source: The token-replay technique uses four counters to keep track of a trace during the replaying: p: Produced tokens c: Consumed tokens m: Missing tokens (consumed while not there) r: Remaining tokens (produced but not consumed) Invariants: At any time: p + m ≥ c ≥ m {\displaystyle p+m\geq c\geq m} At the end: r = p + m − c {\displaystyle r=p+m-c} At the beginning, a token is produced for the source place (p = 1) and at the end, a token is consumed from the sink place (c' = c + 1). When the replay ends, the fitness value can be computed as follows: 1 2 ( 1 − m c ) + 1 2 ( 1 − r p ) {\displaystyle {\frac {1}{2}}(1-{\frac {m}{c}})+{\frac {1}{2}}(1-{\frac {r}{p}})} == Example == Suppose there is a process model in Petri net notation as follows: === Example 1: Replay the trace (a, b, c, d) on the model M === Step 1: A token is initiated. There is one produced token ( p = 1 {\displaystyle p=1} ). Step 2: The activity a {\displaystyle \mathbf {a} } consumes 1 token to be fired and produces 2 tokens ( p = 1 + 2 = 3 {\displaystyle p=1+2=3} and c = 1 {\displaystyle c=1} ). Step 3: The activity b {\displaystyle \mathbf {b} } consumes 1 token and produces 1 token ( p = 3 + 1 = 4 {\displaystyle p=3+1=4} and c = 1 + 1 = 2 {\displaystyle c=1+1=2} ). Step 4: The activity c {\displaystyle \mathbf {c} } consumes 1 token and produces 1 token ( p = 4 + 1 = 5 {\displaystyle p=4+1=5} and c = 2 + 1 = 3 {\displaystyle c=2+1=3} ). Step 5: The activity d {\displaystyle \mathbf {d} } consumes 2 tokens and produces 1 token ( p = 5 + 1 = 6 {\displaystyle p=5+1=6} , c = 3 + 2 = 5 {\displaystyle c=3+2=5} ). Step 6: The token at the end place is consumed ( c = 5 + 1 = 6 {\displaystyle c=5+1=6} ). The trace is complete. The fitness of the trace ( a , b , c , d {\displaystyle \mathbf {a,b,c,d} } ) on the model M {\displaystyle \mathbf {M} } is: 1 2 ( 1 − m c ) + 1 2 ( 1 − r p ) = 1 2 ( 1 − 0 6 ) + 1 2 ( 1 − 0 6 ) = 1 {\displaystyle {\frac {1}{2}}(1-{\frac {m}{c}})+{\frac {1}{2}}(1-{\frac {r}{p}})={\frac {1}{2}}(1-{\frac {0}{6}})+{\frac {1}{2}}(1-{\frac {0}{6}})=1} === Example 2: Replay the trace (a, b, d) on the model M === Step 1: A token is initiated. There is one produced token ( p = 1 {\displaystyle p=1} ). Step 2: The activity a {\displaystyle \mathbf {a} } consumes 1 token to be fired and produces 2 tokens ( p = 1 + 2 = 3 {\displaystyle p=1+2=3} and c = 1 {\displaystyle c=1} ). Step 3: The activity b {\displaystyle \mathbf {b} } consumes 1 token and produces 1 token ( p = 3 + 1 = 4 {\displaystyle p=3+1=4} and c = 1 + 1 = 2 {\displaystyle c=1+1=2} ). Step 4: The activity d {\displaystyle \mathbf {d} } needs to be fired but there are not enough tokens. One artificial token was produced and the missing token counter is increased by one ( m = 1 {\displaystyle m=1} ). The artificial token and the token at place [ b , d ] {\displaystyle [\mathbf {b,d} ]} are consumed ( c = 2 + 2 = 4 {\displaystyle c=2+2=4} ) and one token is produced at place end ( p = 4 + 1 = 5 {\displaystyle p=4+1=5} ). Step 5: The token in the end place is consumed ( c = 4 + 1 = 5 {\displaystyle c=4+1=5} ). The trace is complete. There is one remaining token at place [ a , c ] {\displaystyle [\mathbf {a,c} ]} ( r = 1 {\displaystyle r=1} ). The fitness of the trace ( a , b , d {\displaystyle \mathbf {a,b,d} } ) on the model M {\displaystyle \mathbf {M} } is: 1 2 ( 1 − m c ) + 1 2 ( 1 − r p ) = 1 2 ( 1 − 1 5 ) + 1 2 ( 1 − 1 5 ) = 0.8 {\displaystyle {\frac {1}{2}}(1-{\frac {m}{c}})+{\frac {1}{2}}(1-{\frac {r}{p}})={\frac {1}{2}}(1-{\frac {1}{5}})+{\frac {1}{2}}(1-{\frac {1}{5}})=0.8}
Read more →
The image fusion process is defined as gathering all the important information from multiple images, and their inclusion into fewer images, usually a single one. This single image is more informative and accurate than any single source image, and it consists of all the necessary information. The purpose of image fusion is not only to reduce the amount of data but also to construct images that are more appropriate and understandable for the human and machine perception. In computer vision, multisensor image fusion is the process of combining relevant information from two or more images into a single image. The resulting image will be more informative than any of the input images. In remote sensing applications, the increasing availability of space borne sensors gives a motivation for different image fusion algorithms. Several situations in image processing require high spatial and high spectral resolution in a single image. Most of the available equipment is not capable of providing such data convincingly. Image fusion techniques allow the integration of different information sources. The fused image can have complementary spatial and spectral resolution characteristics. However, the standard image fusion techniques can distort the spectral information of the multispectral data while merging. In satellite imaging, two types of images are available. The panchromatic image acquired by satellites is transmitted with the maximum resolution available and the multispectral data are transmitted with coarser resolution. This will usually be two or four times lower. At the receiver station, the panchromatic image is merged with the multispectral data to convey more information. Many methods exist to perform image fusion. The very basic one is the high-pass filtering technique. Later techniques are based on Discrete Wavelet Transform, uniform rational filter bank, and Laplacian pyramid. == Motivation == Multi sensor data fusion has become a discipline which demands more general formal solutions to a number of application cases. Several situations in image processing require both high spatial and high spectral information in a single image. This is important in remote sensing. However, the instruments are not capable of providing such information either by design or because of observational constraints. One possible solution for this is data fusion. == Methods == Image fusion methods can be broadly classified into two groups – spatial domain fusion and transform domain fusion. The fusion methods such as averaging, Brovey method, principal component analysis (PCA) and IHS based methods fall under spatial domain approaches. Another important spatial domain fusion method is the high-pass filtering based technique. Here the high frequency details are injected into upsampled version of MS images. The disadvantage of spatial domain approaches is that they produce spatial distortion in the fused image. Spectral distortion becomes a negative factor while we go for further processing, such as classification problem. Spatial distortion can be very well handled by frequency-domain approaches on image fusion. The multiresolution analysis has become a very useful tool for analysing remote sensing images. The discrete wavelet transform has become a very useful tool for fusion. Some other fusion methods are also there, such as Laplacian pyramid based, curvelet transform based etc. These methods show a better performance in spatial and spectral quality of the fused image compared to other spatial methods of fusion. The images used in image fusion should already be registered. Misregistration is a major source of error in image fusion. Some well-known image fusion methods are: High-pass filtering technique IHS transform based image fusion PCA-based image fusion Wavelet transform image fusion Pair-wise spatial frequency matching Comparative analysis of image fusion methods demonstrates that different metrics support different user needs, sensitive to different image fusion methods, and need to be tailored to the application. Categories of image fusion metrics are based on information theory features, structural similarity, or human perception. === Multi-focus image fusion === Multi-focus image fusion is used to collect useful and necessary information from input images with different focus depths in order to create an output image that ideally has all information from input images. In visual sensor network (VSN), sensors are cameras which record images and video sequences. In many applications of VSN, a camera can’t give a perfect illustration including all details of the scene. This is because of the limited depth of focus exists in the optical lens of cameras. Therefore, just the object located in the focal length of camera is focused and cleared and the other parts of image are blurred. VSN has an ability to capture images with different depth of focuses in the scene using several cameras. Due to the large amount of data generated by camera compared to other sensors such as pressure and temperature sensors and some limitation such as limited band width, energy consumption and processing time, it is essential to process the local input images to decrease the amount of transmission data. The aforementioned reasons emphasize the necessary of multi-focus images fusion. Multi-focus image fusion is a process which combines the input multi-focus images into a single image including all important information of the input images and it’s more accurate explanation of the scene than every single input image. == Applications == === In remote sensing === Image fusion in remote sensing has several application domains. An important domain is the multi-resolution image fusion (commonly referred to pan-sharpening). In satellite imagery we can have two types of images: Panchromatic images – An image collected in the broad visual wavelength range but rendered in black and white. Multispectral images – Images optically acquired in more than one spectral or wavelength interval. Each individual image is usually of the same physical area and scale but of a different spectral band. The SPOT PAN satellite provides high resolution (10m pixel) panchromatic data. While the LANDSAT TM satellite provides low resolution (30m pixel) multispectral images. Image fusion attempts to merge these images and produce a single high resolution multispectral image. The standard merging methods of image fusion are based on Red–Green–Blue (RGB) to Intensity–Hue–Saturation (IHS) transformation. The usual steps involved in satellite image fusion are as follows: Resize the low resolution multispectral images to the same size as the panchromatic image. Transform the R, G and B bands of the multispectral image into IHS components. Modify the panchromatic image with respect to the multispectral image. This is usually performed by histogram matching of the panchromatic image with Intensity component of the multispectral images as reference. Replace the intensity component by the panchromatic image and perform inverse transformation to obtain a high resolution multispectral image. Pan-sharpening can be done with Photoshop. Other applications of image fusion in remote sensing are available. === In medical imaging === Image fusion has become a common term used within medical diagnostics and treatment. The term is used when multiple images of a patient are registered and overlaid or merged to provide additional information. Fused images may be created from multiple images from the same imaging modality, or by combining information from multiple modalities, such as magnetic resonance image (MRI), computed tomography (CT), positron emission tomography (PET), and single-photon emission computed tomography (SPECT). In radiology and radiation oncology, these images serve different purposes. For example, CT images are used more often to ascertain differences in tissue density while MRI images are typically used to diagnose brain tumors. For accurate diagnosis, radiologists must integrate information from multiple image formats. Fused, anatomically consistent images are especially beneficial in diagnosing and treating cancer. With the advent of these new technologies, radiation oncologists can take full advantage of intensity modulated radiation therapy (IMRT). Being able to overlay diagnostic images into radiation planning images results in more accurate IMRT target tumor volumes.
Read more →
Reservoir sampling is a family of randomized algorithms for choosing a simple random sample, without replacement, of k items from a population of unknown size n in a single pass over the items. The size of the population n is not known to the algorithm and is typically too large for all n items to fit into main memory. The population is revealed to the algorithm over time, and the algorithm cannot look back at previous items. At any point, the current state of the algorithm must permit extraction of a simple random sample without replacement of size k over the part of the population seen so far. == Motivation == Suppose we see a sequence of items, one at a time. We want to keep 10 items in memory, and we want them to be selected at random from the sequence. If we know the total number of items n and can access the items arbitrarily, then the solution is easy: select 10 distinct indices i between 1 and n with equal probability, and keep the i-th elements. The problem is that we do not always know the exact n in advance. == Simple: Algorithm R == A simple and popular but slow algorithm, Algorithm R, was created by Jeffrey Vitter. Initialize an array R {\displaystyle R} indexed from 1 {\displaystyle 1} to k {\displaystyle k} , containing the first k items of the input x 1 , . . . , x k {\displaystyle x_{1},...,x_{k}} . This is the reservoir. For each new input x i {\displaystyle x_{i}} , generate a random number j uniformly in { 1 , . . . , i } {\displaystyle \{1,...,i\}} . If j ∈ { 1 , . . . , k } {\displaystyle j\in \{1,...,k\}} , then set R [ j ] := x i . {\displaystyle R[j]:=x_{i}.} Otherwise, discard x i {\displaystyle x_{i}} . Return R {\displaystyle R} after all inputs are processed. This algorithm works by induction on i ≥ k {\displaystyle i\geq k} . While conceptually simple and easy to understand, this algorithm needs to generate a random number for each item of the input, including the items that are discarded. The algorithm's asymptotic running time is thus O ( n ) {\displaystyle O(n)} . Generating this amount of randomness and the linear run time causes the algorithm to be unnecessarily slow if the input population is large. This is Algorithm R, implemented as follows: == Optimal: Algorithm L == If we generate n {\displaystyle n} random numbers u 1 , . . . , u n ∼ U [ 0 , 1 ] {\displaystyle u_{1},...,u_{n}\sim U[0,1]} independently, then the indices of the smallest k {\displaystyle k} of them is a uniform sample of the k {\displaystyle k} -subsets of { 1 , . . . , n } {\displaystyle \{1,...,n\}} . The process can be done without knowing n {\displaystyle n} : Keep the smallest k {\displaystyle k} of u 1 , . . . , u i {\displaystyle u_{1},...,u_{i}} that has been seen so far, as well as w i {\displaystyle w_{i}} , the index of the largest among them. For each new u i + 1 {\displaystyle u_{i+1}} , compare it with u w i {\displaystyle u_{w_{i}}} . If u i + 1 < u w i {\displaystyle u_{i+1}
Subject indexing is the act of describing or classifying a document by index terms, keywords, or other symbols in order to indicate what different documents are about, to summarize their contents or to increase findability. In other words, the objective is to identify and describe the subject of documents. Indexes are constructed, separately, on three distinct levels: terms in a document, such as a book; objects in a collection, such as a library; and documents (such as books and articles) within a field of knowledge. Subject indexing is used in information retrieval especially to create bibliographic indexes to retrieve documents on a particular subject. Examples of academic indexing services are Zentralblatt MATH, Chemical Abstracts, and PubMed. The index terms were mostly assigned by experts but author keywords are also common. The process of indexing begins with any analysis of the subject of the document. The indexer must then identify terms that appropriately identify the subject, either by extracting words directly from the document or assigning words from a controlled vocabulary. The terms in the index are then presented in a systematic order. Indexers must decide how many terms to include and how specific the terms should be. Together this gives a depth of indexing. == Subject analysis == The first step in indexing is to decide on the subject matter of the document. In manual indexing, the indexer would consider the subject matter in terms of answer to a set of questions such as "Does the document deal with a specific product, condition or phenomenon?". As the analysis is influenced by the knowledge and experience of the indexer, it follows that two indexers may analyze the content differently and so come up with different index terms. This will impact on the success of retrieval. === Automatic vs. manual subject analysis === Automatic indexing follows set processes of analyzing frequencies of word patterns and comparing results to other documents in order to assign to subject categories. This requires no understanding of the material being indexed. This leads to more uniform indexing but at the expense of the true meaning being interpreted. A computer program will not understand the meaning of statements and may therefore fail to assign some relevant terms or assign incorrectly. Human indexers focus their attention on certain parts of the document such as the title, abstract, summary and conclusions, as analyzing the full text in depth is costly and time-consuming. An automated system takes away the time limit and allows the entire document to be analyzed, but also has the option to be directed to particular parts of the document. == Term selection == The second stage of indexing involves the translation of the subject analysis into a set of index terms. This can involve extracting from the document or assigning from a controlled vocabulary. With the ability to conduct a full text search widely available, many people have come to rely on their own expertise in conducting information searches and full text search has become very popular. Subject indexing and its experts, professional indexers, catalogers, and librarians, remains crucial to information organization and retrieval. These experts understand controlled vocabularies and are able to find information that cannot be located by full text search. The cost of expert analysis to create subject indexing is not easily compared to the cost of hardware, software and labor to manufacture a comparable set of full-text, fully searchable materials. With new web applications that allow every user to annotate documents, social tagging has gained popularity especially in the Web. One application of indexing, the book index, remains relatively unchanged despite the information revolution. === Extraction/Derived indexing === Extraction indexing involves taking words directly from the document. It uses natural language and lends itself well to automated techniques where word frequencies are calculated and those with a frequency over a pre-determined threshold are used as index terms. A stop-list containing common words (such as "the", "and") would be referred to and such stop words would be excluded as index terms. Automated extraction indexing may lead to loss of meaning of terms by indexing single words as opposed to phrases. Although it is possible to extract commonly occurring phrases, it becomes more difficult if key concepts are inconsistently worded in phrases. Automated extraction indexing also has the problem that, even with use of a stop-list to remove common words, some frequent words may not be useful for allowing discrimination between documents. For example, the term glucose is likely to occur frequently in any document related to diabetes. Therefore, use of this term would likely return most or all the documents in the database. Post-coordinated indexing where terms are combined at the time of searching would reduce this effect but the onus would be on the searcher to link appropriate terms as opposed to the information professional. In addition terms that occur infrequently may be highly significant for example a new drug may be mentioned infrequently but the novelty of the subject makes any reference significant. One method for allowing rarer terms to be included and common words to be excluded by automated techniques would be a relative frequency approach where frequency of a word in a document is compared to frequency in the database as a whole. Therefore, a term that occurs more often in a document than might be expected based on the rest of the database could then be used as an index term, and terms that occur equally frequently throughout will be excluded. Another problem with automated extraction is that it does not recognize when a concept is discussed but is not identified in the text by an indexable keyword. Since this process is based on simple string matching and involves no intellectual analysis, the resulting product is more appropriately known as a concordance than an index. === Assignment indexing === An alternative is assignment indexing where index terms are taken from a controlled vocabulary. This has the advantage of controlling for synonyms as the preferred term is indexed and synonyms or related terms direct the user to the preferred term. This means the user can find articles regardless of the specific term used by the author and saves the user from having to know and check all possible synonyms. It also removes any confusion caused by homographs by inclusion of a qualifying term. A third advantage is that it allows the linking of related terms whether they are linked by hierarchy or association, e.g. an index entry for an oral medication may list other oral medications as related terms on the same level of the hierarchy but would also link to broader terms such as treatment. Assignment indexing is used in manual indexing to improve inter-indexer consistency as different indexers will have a controlled set of terms to choose from. Controlled vocabularies do not completely remove inconsistencies as two indexers may still interpret the subject differently. == Index presentation == The final phase of indexing is to present the entries in a systematic order. This may involve linking entries. In a pre-coordinated index the indexer determines the order in which terms are linked in an entry by considering how a user may formulate their search. In a post-coordinated index, the entries are presented singly and the user can link the entries through searches, most commonly carried out by computer software. Post-coordination results in a loss of precision in comparison to pre-coordination. == Depth of indexing == Indexers must make decisions about what entries should be included and how many entries an index should incorporate. The depth of indexing describes the thoroughness of the indexing process with reference to exhaustivity and specificity. === Exhaustivity === An exhaustive index is one which lists all possible index terms. Greater exhaustivity gives a higher recall, or more likelihood of all the relevant articles being retrieved, however, this occurs at the expense of precision. This means that the user may retrieve a larger number of irrelevant documents or documents which only deal with the subject in little depth. In a manual system a greater level of exhaustivity brings with it a greater cost as more man-hours are required. The additional time taken in an automated system would be much less significant. At the other end of the scale, in a selective index only the most important aspects are covered. Recall is reduced in a selective index as if an indexer does not include enough terms, a highly relevant article may be overlooked. Therefore, indexers should strive for a balance and consider what the document may be used. They may also have to consider the implications of time and expense. === Specificity === The specificity describes how closel
Read more →
Metadata controller (or MDC) is a storage area network (SAN) technology for managing file locking, space allocation and data access authorization. This is needed when several clients are given block level access to the same disk volume, data storage sharing. MDCs are only used on high-end servers. These are never found on user computers. In the absence of MDC over a SAN there is no possible way of ensuring privacy of the stored data. This controller can also play its role as a sharing device in case the administrators allow other servers to access certain blocks in a particular SAN. The access granted to the servers is of different levels. Some times it may happen that the server is not able to see a block or make changes in it in case of a locked file. This is caused by grant of low level access. If different clients on SAN happen to know each other, access may be granted to shift a certain block from one server to another. This allows the recipient server to use the block and make changes in it. MDCs work as enzymes. They require certain types of SANs and networks to work properly. If a controller is connected to the right network it will boost its output. In case of wrong connection i.e. with the incorrect network, it will decrease its performance.
Read more →
The circle Hough Transform (CHT) is a basic feature extraction technique used in digital image processing for detecting circles in imperfect images. The circle candidates are produced by “voting” in the Hough parameter space and then selecting local maxima in an accumulator matrix. It is a specialization of the Hough transform. == Theory == In a two-dimensional space, a circle can be described by: ( x − a ) 2 + ( y − b ) 2 = r 2 ( 1 ) {\displaystyle \left(x-a\right)^{2}+\left(y-b\right)^{2}=r^{2}\ \ \ \ \ (1)} where (a,b) is the center of the circle, and r is the radius. If a 2D point (x,y) is fixed, then the parameters can be found according to (1). The parameter space would be three dimensional, (a, b, r). And all the parameters that satisfy (x, y) would lie on the surface of an inverted right-angled cone whose apex is at (x, y, 0). In the 3D space, the circle parameters can be identified by the intersection of many conic surfaces that are defined by points on the 2D circle. This process can be divided into two stages. The first stage is fixing radius then find the optimal center of circles in a 2D parameter space. The second stage is to find the optimal radius in a one dimensional parameter space. === Find parameters with known radius R === If the radius is fixed, then the parameter space would be reduced to 2D (the position of the circle center). For each point (x, y) on the original circle, it can define a circle centered at (x, y) with radius R according to (1). The intersection point of all such circles in the parameter space would be corresponding to the center point of the original circle. Consider 4 points on a circle in the original image (left). The circle Hough transform is shown in the right. Note that the radius is assumed to be known. For each (x,y) of the four points (white points) in the original image, it can define a circle in the Hough parameter space centered at (x, y) with radius r. An accumulator matrix is used for tracking the intersection point. In the parameter space, the voting number of those points that have a newly defined circle passing through them would be increased by one for every circle. Then the local maxima point (the red point in the center in the right figure) can be found. The position (a, b) of the maxima would be the center of the original circle. === Multiple circles with known radius R === Multiple circles with same radius can be found with the same technique. Note that, in the accumulator matrix (right fig), there would be at least 3 local maxima points. === Accumulator matrix and voting === In practice, an accumulator matrix is introduced to find the intersection point in the parameter space. First, we need to divide the parameter space into “buckets” using a grid and produce an accumulator matrix according to the grid. The element in the accumulator matrix denotes the number of “circles” in the parameter space that are passing through the corresponding grid cell in the parameter space. The number is also called “voting number”. Initially, every element in the matrix is zeros. Then for each “edge” point in the original space, we can formulate a circle in the parameter space and increase the voting number of the grid cell which the circle passes through. This process is called “voting”. After voting, we can find local maxima in the accumulator matrix. The positions of the local maxima are corresponding to the circle centers in the original space. === Find circle parameter with unknown radius === Since the parameter space is 3D, the accumulator matrix would be 3D, too. We can iterate through possible radii; for each radius, we use the previous technique. Finally, find the local maxima in the 3D accumulator matrix. Accumulator array should be A[x,y,r] in the 3D space. Voting should be for each pixels, radius and theta A[x,y,r] += 1 The algorithm : For each A[a,b,r] = 0; Process the filtering algorithm on image Gaussian Blurring, convert the image to grayscale ( grayScaling), make Canny operator, The Canny operator gives the edges on image. Vote on all possible circles in accumulator. The local maximum voted circles of Accumulator A gives the circle Hough space. The maximum voted circle of Accumulator gives the circle. The Incrementing for Best Candidate : For each A[a,b,r] = 0; // fill with zeroes initially, instantiate 3D matrix For each cell(x,y) For each theta t = 0 to 360 // the possible theta 0 to 360 b = y – r sin(t PI / 180); //polar coordinate for center (convert to radians) a = x – r cos(t PI / 180); //polar coordinate for center (convert to radians) A[a,b,r] +=1; //voting end end == Examples == === Find circles in a shoe-print === The original picture (right) is first turned into a binary image (left) using a threshold and Gaussian filter. Then edges (mid) are found from it using canny edge detection. After this, all the edge points are used by the Circle Hough Transform to find underlying circle structure. == Limitations == Since the parameter space of the CHT is three dimensional, it may require lots of storage and computation. Choosing a bigger grid size can ameliorate this problem. However, choosing an appropriate grid size is difficult. Since too coarse a grid can lead to large values of the vote being obtained falsely because many quite different structures correspond to a single bucket. Too fine a grid can lead to structures not being found because votes resulting from tokens that are not exactly aligned end up in different buckets, and no bucket has a large vote. Also, the CHT is not very robust to noise. == Extensions == === Adaptive Hough Transform === J. Illingworth and J. Kittler introduced this method for implementing Hough Transform efficiently. The AHT uses a small accumulator array and the idea of a flexible iterative "coarse to fine" accumulation and search strategy to identify significant peaks in the Hough parameter spaces. This method is substantially superior to the standard Hough Transform implementation in both storage and computational requirements. == Application == === People Counting === Since the head would be similar to a circle in an image, CHT can be used for detecting heads in a picture, so as to count the number of persons in the image. === Brain Aneurysm Detection === Modified Hough Circle Transform (MHCT) is used on the image extracted from Digital Subtraction Angiogram (DSA) to detect and classify aneurysms type. == Implementation code == Circle Detection via Standard Hough Transform, by Amin Sarafraz, Mathworks (File Exchange) Hough Circle Transform, OpenCV-Python Tutorials (archived version on archive.org)
Read more →
The Webometrics Ranking of Business Schools, also known as Ranking Web of Business Schools, is a ranking system for the world's business schools based on a composite indicator that takes into account both the volume of the Web content (number of web pages and files) and the visibility and impact of these web publications according to the number of external inlinks (site citations) they received. The ranking is published by the Cybermetrics Lab, a research group of the Spanish National Research Council (CSIC) located in Madrid. This ranking was discontinued in 2013 and is no longer updated. This discontinued ranking is, however, often cited (as of 2017-06-16) by Google as its main ranking reference. Examples are: "Spain business school ranking " = "Zurich business school ranking" etc. The Webometrics Ranking of World Universities is a similar ranking of universities.
Read more →
A controlled vocabulary provides a way to organize knowledge for subsequent retrieval. Controlled vocabularies are used in subject indexing schemes, subject headings, thesauri, taxonomies and other knowledge organization systems. Controlled vocabulary schemes mandate the use of predefined, preferred terms that have been preselected by the designers of the schemes, in contrast to natural language vocabularies, which have no such restriction. == In library and information science == In library and information science, controlled vocabulary is a carefully selected list of words and phrases, which are used to tag units of information (document or work) so that they may be more easily retrieved by a search. Controlled vocabularies solve the problems of homographs, synonyms and polysemes by a bijection between concepts and preferred terms. In short, controlled vocabularies reduce unwanted ambiguity inherent in normal human languages where the same concept can be given different names and ensure consistency. For example, in the Library of Congress Subject Headings (a subject heading system that uses a controlled vocabulary), preferred terms—subject headings in this case—have to be chosen to handle choices between variant spellings of the same word (American versus British), choice among scientific and popular terms (cockroach versus Periplaneta americana), and choices between synonyms (automobile versus car), among other difficult issues. Choices of preferred terms are based on the principles of user warrant (what terms users are likely to use), literary warrant (what terms are generally used in the literature and documents), and structural warrant (terms chosen by considering the structure, scope of the controlled vocabulary). Controlled vocabularies also typically handle the problem of homographs with qualifiers. For example, the term pool has to be qualified to refer to either swimming pool or the game pool to ensure that each preferred term or heading refers to only one concept. === Types used in libraries === There are two main kinds of controlled vocabulary tools used in libraries: subject headings and thesauri. While the differences between the two are diminishing, there are still some minor differences: Historically, subject headings were designed to describe books in library catalogs by catalogers while thesauri were used by indexers to apply index terms to documents and articles. Subject headings tend to be broader in scope describing whole books, while thesauri tend to be more specialized covering very specific disciplines. Because of the card catalog system, subject headings tend to have terms that are in indirect order (though with the rise of automated systems this is being removed), while thesaurus terms are always in direct order. Subject headings tend to use more pre-coordination of terms such that the designer of the controlled vocabulary will combine various concepts together to form one preferred subject heading. (e.g., children and terrorism) while thesauri tend to use singular direct terms. Thesauri list not only equivalent terms but also narrower, broader terms and related terms among various preferred and non-preferred (but potentially synonymous) terms, while historically most subject headings did not. For example, the Library of Congress Subject Heading itself did not have much syndetic structure until 1943, and it was not until 1985 when it began to adopt the thesauri type term "Broader term" and "Narrow term". The terms are chosen and organized by trained professionals (including librarians and information scientists) who possess expertise in the subject area. Controlled vocabulary terms can accurately describe what a given document is actually about, even if the terms themselves do not occur within the document's text. Well known subject heading systems include the Library of Congress system, Medical Subject Headings (MeSH) created by the United States National Library of Medicine, and Sears. Well known thesauri include the Art and Architecture Thesaurus and the ERIC Thesaurus. When selecting terms for a controlled vocabulary, the designer has to consider the specificity of the term chosen, whether to use direct entry, inter consistency and stability of the language. Lastly the amount of pre-coordination (in which case the degree of enumeration versus synthesis becomes an issue) and post-coordination in the system is another important issue. Controlled vocabulary elements (terms/phrases) employed as tags, to aid in the content identification process of documents, or other information system entities (e.g. DBMS, Web Services) qualifies as metadata. == Indexing languages == There are three main types of indexing languages. Controlled indexing language – only approved terms can be used by the indexer to describe the document Natural language indexing language – any term from the document in question can be used to describe the document Free indexing language – any term (not only from the document) can be used to describe the document When indexing a document, the indexer also has to choose the level of indexing exhaustivity, the level of detail in which the document is described. For example, using low indexing exhaustivity, minor aspects of the work will not be described with index terms. In general the higher the indexing exhaustivity, the more terms indexed for each document. In recent years free text search as a means of access to documents has become popular. This involves using natural language indexing with an indexing exhaustively set to maximum (every word in the text is indexed). These methods have been compared in some studies, such as the 2007 article, "A Comparative Evaluation of Full-text, Concept-based, and Context-sensitive Search". === Advantages === Controlled vocabularies are often claimed to improve the accuracy of free text searching, such as to reduce irrelevant items in the retrieval list. These irrelevant items (false positives) are often caused by the inherent ambiguity of natural language. Take the English word football for example. Football is the name given to a number of different team sports. Worldwide the most popular of these team sports is association football, which also happens to be called soccer in several countries. The word football is also applied to rugby football (rugby union and rugby league), American football, Australian rules football, Gaelic football, and Canadian football. A search for football therefore will retrieve documents that are about several completely different sports. Controlled vocabulary solves this problem by tagging the documents in such a way that the ambiguities are eliminated. Compared to free text searching, the use of a controlled vocabulary can dramatically increase the performance of an information retrieval system, if performance is measured by precision (the percentage of documents in the retrieval list that are actually relevant to the search topic). In some cases controlled vocabulary can enhance recall as well, because unlike natural language schemes, once the correct preferred term is searched, there is no need to search for other terms that might be synonyms of that term. === Disadvantages === A controlled vocabulary search may lead to unsatisfactory recall, in that it will fail to retrieve some documents that are actually relevant to the search question. This is particularly problematic when the search question involves terms that are sufficiently tangential to the subject area such that the indexer might have decided to tag it using a different term (but the searcher might consider the same). Essentially, this can be avoided only by an experienced user of controlled vocabulary whose understanding of the vocabulary coincides with that of the indexer. Another possibility is that the article is just not tagged by the indexer because indexing exhaustivity is low. For example, an article might mention football as a secondary focus, and the indexer might decide not to tag it with "football" because it is not important enough compared to the main focus. But it turns out that for the searcher that article is relevant and hence recall fails. A free text search would automatically pick up that article regardless. On the other hand, free text searches have high exhaustivity (every word is searched) so although it has much lower precision, it has potential for high recall as long as the searcher overcome the problem of synonyms by entering every combination. Controlled vocabularies may become outdated rapidly in fast developing fields of knowledge, unless the preferred terms are updated regularly. Even in an ideal scenario, a controlled vocabulary is often less specific than the words of the text itself. Indexers trying to choose the appropriate index terms might misinterpret the author, while this precise problem is not a factor in a free text, as it uses the author's own words. The use of controlled vocabularies can be costly compared to free
Read more →
Penril DataComm Networks, Inc. was a computer telecommunications hardware company that made some acquisitions and was eventually split into two parts: one was acquired by Bay Networks and the other was a newly formed company named Access Beyond. The focus of both company's products was end-to-end data transfer. By the mid-1990s, with the popularization of the internet, this was no longer of wide interest. == History == Penril, whose earnings reports and other financials were followed by The New York Times in the 1990s, made several acquisitions but also grew internally. Following its Datability acquisition it renamed itself Penril Datability Networks. By the time the 1968-founded Penril was acquired by Bay their name was Penril DataComm Networks. The company, which as of 1985 "had made 14 acquisitions in 12 years," also had done extensive work regarding quality control, and leveraged their product line by what The Washington Post called clever packaging: "software, cables, instructions and telephone support" sold to those less technically skilled as "Network in a Box." == Datability == Datability Software Systems Inc. was the initial name of what by 1991 became 'Datability, Inc.', "a manufacturer of hardware that links computer networks." The 1977-founded firm began as a software consulting company, especially in the area of databases. To speed up project development they built a program generator, which they marketed as Control 10/20 (targeted at users of Digital Equipment Corporation's DECsystem-10 and DECSYSTEM-20). After trying their hand at time-sharing they built hardware to enhance bridging these computers to DEC's VAX product line. In particular they focused on Digital's LAT protocol, selling "boxes" that reimplemented the protocol, at a lower price than DEC's. They later expanded into other areas of telecommunications hardware The firm relocated to a larger manufacturing plant in 1991 and was acquired by Penril in 1993. == Access Beyond == Access Beyond was initially housed by Penril, from which it was spun off. A securities analyst noted that Access began operations with no debt. They subsequently merged with Hayes Corporation. Some of the funds brought to the merger came from a sale by Penril of two of its divisions, each bringing about $4 million. == Ron Howard == Ron Howard, founder of Datability, became part of Penril when the latter acquired the former, and was CEO of Access Beyond when it was spun off by Penril. Access merged with Hayes Microcomputer Products and was renamed Hayes Corp, at which time Howard became executive VP of business development and corporate vice chairman of Hayes. == People == In the matter of hiring immigrants, in an industry where recent arrivals came from a culture of six day work weeks, and subcontracting was then common, these assembly line workers at Penril comprised about 25%, compared to double in other firms. Placement was overseen by government agencies. == Controversy == Penril had a joint development agreement, beginning in 1990, with a Standard Microsystems Corporation (SMSC) subsidiary. A dispute arose, and the matter was brought to court. Penril was awarded $3.5 million in 1996.
Read more →
The following outline is provided as an overview of and topical guide to computer security: Computer security (also cybersecurity, digital security, or information technology (IT) security) is a subdiscipline within the field of information security. It focuses on protecting computer software, systems, and networks from threats that can lead to unauthorized information disclosure, theft, or damage to hardware, software, or data, as well as to the disruption or misdirection of the services they provide. The growing significance of computer security reflects the increasing dependence on computer systems, the Internet, and evolving wireless network standards. This reliance has expanded with the proliferation of smart devices, including smartphones, televisions, and other components of the Internet of things (IoT). (yes) == Essence of computer security == Computer security can be described as all of the following: a branch of security Network security application security == Areas of computer security == Access control – selective restriction of access to a place or other resource. The act of accessing may mean consuming, entering, or using. Permission to access a resource is called authorization. Computer access control – includes authorization, authentication, access approval, and audit. Authentication Knowledge-based authentication Integrated Windows Authentication Password Password length parameter Secure Password Authentication Secure Shell Kerberos (protocol) SPNEGO NTLMSSP AEGIS SecureConnect TACACS Cyber security and countermeasure Device fingerprint Physical security – protecting property and people from damage or harm (such as from theft, espionage, or terrorist attacks). It includes security measures designed to deny unauthorized access to facilities, (such as a computer room), equipment (such as your computer), and resources (like the data storage devices, and data, in your computer). If a computer gets stolen, then the data goes with it. In addition to theft, physical access to a computer allows for ongoing espionage, like the installment of a hardware keylogger device, and so on. Data security – protecting data, such as a database, from destructive forces and the unwanted actions of unauthorized users. Information privacy – relationship between collection and dissemination of data, technology, the public expectation of privacy, and the legal and political issues surrounding them. Privacy concerns exist wherever personally identifiable information or other sensitive information is collected and stored – in digital form or otherwise. Improper or non-existent disclosure control can be the root cause for privacy issues. Internet privacy – involves the right or mandate of personal privacy concerning the storing, repurposing, provision to third parties, and displaying of information pertaining to oneself via the Internet. Privacy can entail either Personally Identifying Information (PII) or non-PII information such as a site visitor's behavior on a website. PII refers to any information that can be used to identify an individual. For example, age and physical address alone could identify who an individual is without explicitly disclosing their name, as these two factors relate to a specific person. Mobile security – security pertaining to smartphones, especially with respect to the personal and business information stored on them. Network security – provisions and policies adopted by a network administrator to prevent and monitor unauthorized access, misuse, modification, or denial of a computer network and network-accessible resources. Network security involves the authorization of access to data in a network, which is controlled by the network administrator. Network Security Toolkit Internet security – computer security specifically related to the Internet, often involving browser security but also network security on a more general level as it applies to other applications or operating systems on a whole. Its objective is to establish rules and measures to use against attacks over the Internet. The Internet represents an insecure channel for exchanging information leading to a high risk of intrusion or fraud, such as phishing. Different methods have been used to protect the transfer of data, including encryption. World Wide Web Security – dealing with the vulnerabilities of users who visit websites. Cybercrime on the Web can include identity theft, fraud, espionage and intelligence gathering. For criminals, the Web has become the preferred way to spread malware. == Computer security threats == Methods of Computer Network Attack and Computer Network Exploitation Social engineering is a frequent method of attack, and can take the form of phishing, or spear phishing in the corporate or government world, as well as counterfeit websites. Password sharing and insecure password practices Poor patch management Computer crime – Computer criminals – Hackers – in the context of computer security, a hacker is someone who seeks and exploits weaknesses in a computer system or computer network. Password cracking – Software cracking – Script kiddies – List of computer criminals – Identity theft – Computer malfunction – Operating system failure and vulnerabilities Hard disk drive failure – occurs when a hard disk drive malfunctions and the stored information cannot be accessed with a properly configured computer. A disk failure may occur in the course of normal operation, or due to an external factor such as exposure to fire or water or high magnetic fields, or suffering a sharp impact or environmental contamination, which can lead to a head crash. Data recovery from a failed hard disk is problematic and expensive. Backups are essential Computer and network surveillance – Man in the Middle Loss of anonymity – when one's identity becomes known. Identification of people or their computers allows their activity to be tracked. For example, when a person's name is matched with the IP address they are using, their activity can be tracked thereafter by monitoring the IP address. HTTP Cookie Local Shared Object Web bug Spyware Adware Cyber spying – obtaining secrets without the permission of the holder of the information (personal, sensitive, proprietary or of classified nature), from individuals, competitors, rivals, groups, governments and enemies for personal, economic, political or military advantage using methods on the Internet, networks or individual computers through the use of cracking techniques and malicious software including Trojan horses and spyware. It may be done online from by professionals sitting at their computer desks on bases in far away countries, or it may involve infiltration at home by computer trained conventional spies and moles, or it may be the criminal handiwork of amateur malicious hackers, software programmers, or thieves. Computer and network eavesdropping Lawful Interception War Driving Packet analyzer (aka packet sniffer) – mainly used as a security tool (in many ways, including for the detection of network intrusion attempts), packet analyzers can also be used for spying, to collect sensitive information (e.g., login details, cookies, personal communications) sent through a network, or to reverse engineer proprietary protocols used over a network. One way to protect data sent over a network such as the Internet is by using encryption software. Cyberwarfare – Exploit – piece of software, a chunk of data, or a sequence of commands that takes advantage of a bug, glitch or vulnerability in order to cause unintended or unanticipated behavior to occur on computer software, hardware, or something electronic (usually computerized). Such behavior frequently includes things like gaining control of a computer system, allowing privilege escalation, or a denial-of-service attack. Trojan Computer virus Computer worm Denial-of-service attack – an attempt to make a machine or network resource unavailable to its intended users, usually consisting of efforts to temporarily or indefinitely interrupt or suspend services of a host connected to the Internet. One common method of attack involves saturating the target machine with external communications requests, so much so that it cannot respond to legitimate traffic, or responds so slowly as to be rendered essentially unavailable. Distributed denial-of-service attack (DDoS) – DoS attack sent by two or more persons. Hacking tool Malware Computer virus Computer worm Keylogger – program that does keystroke logging, which is the action of recording (or logging) the keys struck on a keyboard, typically in a covert manner so that the person using the keyboard is unaware that their actions are being monitored. There are also HID spoofing hardware keyloggers, like a USB device inserting stored keystores when connected. Rootkit – stealthy type of software, typically malicious, designed to hide the existence of certain processes or programs from normal methods of detection and enable contin
Read more →
The World Congress of Universal Documentation was held from 16 to 21 August 1937 in Paris, France. Delegates from 45 countries met to discuss means by which all of the world's information, in print, in manuscript, and in other forms, could be efficiently organized and made accessible. == The Congress in the history of information science == The Congress, held at the Trocadéro under "the auspices" of the Institut International de Bibliographie, was "the apotheosis" of a general movement in the 1930s towards the classification of the growing mass of information and the improvement of access to that information. For the first time in the history of information science, technological means were beginning to catch up with theoretical ends, and the discussions at the conference reflected that fact. Its participation in the Congress was one of the first projects of the American Documentation Institute (ADI). Participants in the conference discussed what has been more recently called "a continuously updated hypertext encyclopedia." Joseph Reagle sees many of the ideas considered at the conference as forerunners of some of the key goals and norms of Wikipedia. == Microfilm == The main resolution adopted by the congress proposed that microfilm be used to make information universally available. Watson Davis, chairman of the American delegation and president of the ADI, stated that the volume of information being produced created difficult problems of access and preservation, but that these could be solved by the use of microfilm. In his address to the Congress, Davis said: Most immediate and practical to put into operation is the microfilming of material in libraries upon demand. It will become fashionable and economical to send a potential book borrower a little strip of microfilm for his permanent possession instead of the book and then badgering him to return it before he has had a chance to use it effectively. I believe that reading machines for microfilm will become as common as typewriters in studies and laboratories. If the principal libraries and information centers of the world will cooperate in such "bibliofilm services," as they are called, if they exchange orders and have essentially uniform methods, forms for ordering, standard microfilm format and production methods and comparable if not uniform prices, the resources of any library will be placed at the disposal of any scholar or scientist anywhere in the world. All the libraries cooperating will merge into one world library without loss of identity or individuality. The world's documentation will become available to even the most isolated and individualistic scholar. The Congress included two separate exhibits on microfilm. One was of the equipment used at the Bibliothèque nationale de France and the other, coordinated by Herman H. Fussler of the University of Chicago, consisting of "an entire microfilm laboratory," complete with cameras, a darkroom, and various kinds of reading machines. Emanuel Goldberg presented a paper on an early copying camera he had invented. Other resolutions passed by the Congress concerned uniform standards for the preparation of articles, for classifying books and other documents, for indexing newspapers and periodicals, and for cooperation between libraries. == H. G. Wells == In his address to the Congress, H. G. Wells said that he thought that his idea of the "world brain" was a precursor to the ideas other delegates were proposing, and explicitly linked the projects being discussed to the work of the encyclopédistes: I am speaking of a process of mental organization throughout the world which I believe to be as inevitable as anything can be in human affairs. All the distresses and horrors of the present time are fundamentally intellectual. The world has to pull its mind together, and this [Congress] is the beginning of its efforts. Civilization is a Phoenix. It perishes in flames and even as it dies it is born again. This synthesis of knowledge upon which you are working is the necessary beginning of a new world. It is good to be meeting here in Paris where the first encyclopedia of power was made. It would be impossible to overrate our debt to Diderot and his associates. == Other participants == Participants in the Congress included authors, librarians, scholars, archivists, scientists, and editors. Some of the notable people in attendance not mentioned above were:
Read more →
The r-to-1 collision problem is an important theoretical problem in complexity theory, quantum computing, and computational mathematics. The collision problem most often refers to the 2-to-1 version: given n {\displaystyle n} even and a function f : { 1 , … , n } → { 1 , … , n } {\displaystyle f:\,\{1,\ldots ,n\}\rightarrow \{1,\ldots ,n\}} , we are promised that f is either 1-to-1 or 2-to-1. We are only allowed to make queries about the value of f ( i ) {\displaystyle f(i)} for any i ∈ { 1 , … , n } {\displaystyle i\in \{1,\ldots ,n\}} . The problem then asks how many such queries we need to make to determine with certainty whether f is 1-to-1 or 2-to-1. == Classical solutions == === Deterministic === Solving the 2-to-1 version deterministically requires n 2 + 1 {\textstyle {\frac {n}{2}}+1} queries, and in general distinguishing r-to-1 functions from 1-to-1 functions requires n r + 1 {\textstyle {\frac {n}{r}}+1} queries. This is a straightforward application of the pigeonhole principle: if a function is r-to-1, then after n r + 1 {\textstyle {\frac {n}{r}}+1} queries we are guaranteed to have found a collision. If a function is 1-to-1, then no collision exists. Thus, n r + 1 {\textstyle {\frac {n}{r}}+1} queries suffice. If we are unlucky, then the first n / r {\displaystyle n/r} queries could return distinct answers, so n r + 1 {\textstyle {\frac {n}{r}}+1} queries is also necessary. === Randomized === If we allow randomness, the problem is easier. By the birthday paradox, if we choose (distinct) queries at random, then with high probability we find a collision in any fixed 2-to-1 function after Θ ( n ) {\displaystyle \Theta ({\sqrt {n}})} queries. == Quantum solution == The BHT algorithm, which uses Grover's algorithm, solves this problem optimally by only making O ( n 1 / 3 ) {\displaystyle O(n^{1/3})} queries to f. The matching lower bound of Ω ( n 1 / 3 ) {\displaystyle \Omega (n^{1/3})} was proved by Aaronson and Shi using the polynomial method.
Read more →