AI Art For Sale

AI Art For Sale — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

IT baseline protection

The IT baseline protection (German: IT-Grundschutz) approach from the German Federal Office for Information Security (BSI) is a methodology to identify and implement computer security measures in an organization. The aim is the achievement of an adequate and appropriate level of security for IT systems. To reach this goal the BSI recommends "well-proven technical, organizational, personnel, and infrastructural safeguards". Organizations and federal agencies show their systematic approach to secure their IT systems (e.g. Information Security Management System) by obtaining an ISO/IEC 27001 Certificate on the basis of IT-Grundschutz. == Overview baseline security == The term baseline security signifies standard security measures for typical IT systems. It is used in various contexts with somewhat different meanings. For example: Microsoft Baseline Security Analyzer: Software tool focused on Microsoft operating system and services security Cisco security baseline: Vendor recommendation focused on network and network device security controls Nortel baseline security: Set of requirements and best practices with a focus on network operators ISO/IEC 13335-3 defines a baseline approach to risk management. This standard has been replaced by ISO/IEC 27005, but the baseline approach was not taken over yet into the 2700x series. There are numerous internal baseline security policies for organizations, The German BSI has a comprehensive baseline security standard, that is compliant with the ISO/IEC 27000-series == BSI IT baseline protection == The foundation of an IT baseline protection concept is initially not a detailed risk analysis. It proceeds from overall hazards. Consequently, sophisticated classification according to damage extent and probability of occurrence is ignored. Three protection needs categories are established. With their help, the protection needs of the object under investigation can be determined. Based on these, appropriate personnel, technical, organizational and infrastructural security measures are selected from the IT Baseline Protection Catalogs. The Federal Office for Security in Information Technology's IT Baseline Protection Catalogs offer a "cookbook recipe" for a normal level of protection. Besides probability of occurrence and potential damage extents, implementation costs are also considered. By using the Baseline Protection Catalogs, costly security analyses requiring expert knowledge are dispensed with, since overall hazards are worked with in the beginning. It is possible for the relative layman to identify measures to be taken and to implement them in cooperation with professionals. The BSI grants a baseline protection certificate as confirmation for the successful implementation of baseline protection. In stages 1 and 2, this is based on self declaration. In stage 3, an independent, BSI-licensed auditor completes an audit. Certification process internationalization has been possible since 2006. ISO/IEC 27001 certification can occur simultaneously with IT baseline protection certification. (The ISO/IEC 27001 standard is the successor of BS 7799-2). This process is based on the new BSI security standards. This process carries a development price which has prevailed for some time. Corporations having themselves certified under the BS 7799-2 standard are obliged to carry out a risk assessment. To make it more comfortable, most deviate from the protection needs analysis pursuant to the IT Baseline Protection Catalogs. The advantage is not only conformity with the strict BSI, but also attainment of BS 7799-2 certification. Beyond this, the BSI offers a few help aids like the policy template and the GSTOOL. One data protection component is available, which was produced in cooperation with the German Federal Commissioner for Data Protection and Freedom of Information and the state data protection authorities and integrated into the IT Baseline Protection Catalog. This component is not considered, however, in the certification process. == Baseline protection process == The following steps are taken pursuant to the baseline protection process during structure analysis and protection needs analysis: The IT network is defined. IT structure analysis is carried out. Protection needs determination is carried out. A baseline security check is carried out. IT baseline protection measures are implemented. Creation occurs in the following steps: IT structure analysis (survey) Assessment of protection needs Selection of actions Running comparison of nominal and actual. === IT structure analysis === An IT network includes the totality of infrastructural, organizational, personnel, and technical components serving the fulfillment of a task in a particular information processing application area. An IT network can thereby encompass the entire IT character of an institution or individual division, which is partitioned by organizational structures as, for example, a departmental network, or as shared IT applications, for example, a personnel information system. It is necessary to analyze and document the information technological structure in question to generate an IT security concept and especially to apply the IT Baseline Protection Catalogs. Due to today's usually heavily networked IT systems, a network topology plan offers a starting point for the analysis. The following aspects must be taken into consideration: The available infrastructure, The organizational and personnel framework for the IT network, Networked and non-networked IT systems employed in the IT network. The communications connections between IT systems and externally, IT applications run within the IT network. === Protection needs determination === The purpose of the protection needs determination is to investigate what protection is sufficient and appropriate for the information and information technology in use. In this connection, the damage to each application and the processed information, which could result from a breach of confidentiality, integrity or availability, is considered. Important in this context is a realistic assessment of the possible follow-on damages. A division into the three protection needs categories "low to medium", "high" and "very high" has proved itself of value. "Public", "internal" and "secret" are often used for confidentiality. === Modelling === Heavily networked IT systems typically characterize information technology in government and business these days. As a rule, therefore, it is advantageous to consider the entire IT system and not just individual systems within the scope of an IT security analysis and concept. To be able to manage this task, it makes sense to logically partition the entire IT system into parts and to separately consider each part or even an IT network. Detailed documentation about its structure is prerequisite for the use of the IT Baseline Protection Catalogs on an IT network. This can be achieved, for example, via the IT structure analysis described above. The IT Baseline Protection Catalogs' components must ultimately be mapped onto the components of the IT network in question in a modelling step. === Baseline security check === The baseline security check is an organisational instrument offering a quick overview of the prevailing IT security level. With the help of interviews, the status quo of an existing IT network (as modelled by IT baseline protection) relative to the number of security measures implemented from the IT Baseline Protection Catalogs are investigated. The result is a catalog in which the implementation status "dispensable", "yes", "partly", or "no" is entered for each relevant measure. By identifying not yet, or only partially, implemented measures, improvement options for the security of the information technology in question are highlighted. The baseline security check gives information about measures, which are still missing (nominal vs. actual comparison). From this follows what remains to be done to achieve baseline protection through security. Not all measures suggested by this baseline check need to be implemented. Peculiarities are to be taken into account! It could be that several more or less unimportant applications are running on a server, which have lesser protection needs. In their totality, however, these applications are to be provided with a higher level of protection. This is called the (cumulation effect). The applications running on a server determine its need for protection. Several IT applications can run on an IT system. When this occurs, the application with the greatest need for protection determines the IT systems protection category. Conversely, it is conceivable that an IT application with great protection needs does not automatically transfer this to the IT system. This may happen because the IT system is configured redundantly, or because only an inconsequential part is running on it. This is called the (distribution effect). This is the case, fo
Read more →
How to Choose an AI Writing Assistant

Comparing the best AI writing assistant? An AI writing assistant is software that uses machine learning to help you get more done — it lowers the barrier so anyone can produce professional output. Privacy matters too: check whether your data trains the model and whether a no-log or enterprise tier is available. Whether you are a beginner or a pro, the right AI writing assistant slots into your workflow and pays for itself fast. We tested the leading options and ranked them by quality, value, and ease of use.
Read more →
Peter Gerstoft

Peter Gerstoft is a Danish-American scientist and engineer specializing in ocean acoustics, seismology, and signal processing. He is currently a professor in the Department of Electrical and Photonics Engineering at the Technical University of Denmark. He was previously a Distinguished Data Scientist at the Scripps Institution of Oceanography at the University of California, San Diego and an adjunct professor in the Department of Electrical and Computer Engineering at UC San Diego. == Education == Gerstoft received his MSc in engineering from the Technical University of Denmark in 1983 and another MSc from the University of Western Ontario in 1984. He completed his PhD in engineering at the Technical University of Denmark in 1986. == Career == Gerstoft began his career in acoustics and vibrations at Odegaard & Danneskiold-Samsøe (1987–1992). He then served as a Senior Scientist at the NATO SACLANT Undersea Research Centre in La Spezia, Italy, from 1992 to 1997. Between 1999 and 2000, Gerstoft worked as a Senior Seismic Acoustic Officer with the Comprehensive Nuclear-Test-Ban Treaty Organization. He has been a Data Scientist at the Scripps Institution of Oceanography since 1997. From 2013, he held an adjunct faculty position in Electrical and Computer Engineering at UC San Diego, where he taught courses on seismology, data assimilation, and machine learning for physical systems. Gerstoft retired from UC San Diego in 2025 and accepted an appointment as Professor of Electrical and Photonics Engineering at the Technical University of Denmark in 2026 . == Research and contributions == Gerstoft's research focuses on environmental signal processing, with a particular emphasis on inversion methods, including their theoretical development, algorithmic implementation, and practical applications. In the 1990s, he investigated the use of nonlinear optimization and Bayesian approaches in acoustic inverse problems related to source localization and environmental parameter estimation. His work integrated physical propagation models with Bayesian sampling methods and a range of likelihood functions. These techniques have been applied to various data types, including vertical sensor arrays, single-sensor broadband data, and transmission loss measurements, and contributed to a general framework for inversion based on Gaussian assumptions. He has also conducted research in machine learning and sparse signal processing, particularly in the context of sensor array data. This includes applications such as direction of arrival estimation and source localization, including for seismic events such as the 2011 Tōhoku earthquake and for ship tracking in ocean environments. His work on sparse Bayesian sequential methods and techniques for estimating Lagrange multipliers in constrained optimization problems has contributed to the development of adaptive and high-resolution signal processing techniques. Gerstoft has applied supervised learning and deep neural networks to problems in physical acoustics, including source localization in ocean waveguides. He has also co-authored several review articles on the use of machine learning in acoustics and seismology. == Honors == Fulbright Scholar, Massachusetts Institute of Technology (1989–1990) Fellow, Acoustical Society of America (2003) Member, American Geophysical Union (since 2004) Senior Member, Institute of Electrical and Electronics Engineers (2018) Fellow, Institute of Electrical and Electronics Engineers (2023) == Selected publications == === Book === Diachok, O., Caiti, A., Gerstoft, P., & Schmidt, H. (Eds.). Full Field Inversion Methods in Ocean and Seismo-Acoustics. Kluwer Academic Publishers, 1995. === Selected articles === Gerstoft, P. (1994). "Inversion of seismo-acoustic data using genetic algorithms and a posteriori probability distributions". Journal of the Acoustical Society of America. 95 (2): 770–782. doi:10.1121/1.408467. Gerstoft, P., & Mecklenbrauker, C. F. (1998). "Ocean acoustic inversion with estimation of a posteriori probability distributions". Journal of the Acoustical Society of America. 104 (2): 808–819. doi:10.1121/1.423287. Sabra, K. G., Gerstoft, P., Roux, P., Kuperman, W. A., & Fehler, M. (2005). "Extracting time-domain Green's function estimates from ambient seismic noise". Geophysical Research Letters. 32, L03310. Xenaki, A., Gerstoft, P., & Mosegaard, K. (2014). "Compressive beamforming". Journal of the Acoustical Society of America. 136, 260–271. Niu, H., Reeves, D., & Gerstoft, P. (2017). "Source localization in an ocean waveguide using supervised machine learning". Journal of the Acoustical Society of America. 142, 1176–1188.
Read more →
METEO System

The METEO System is a machine translation system specifically designed for the translation of the weather forecasts issued daily by Environment Canada. The system was used from 1981 to 30 September 2001 by Environment Canada to translate forecasts issued in French in the province of Quebec into English and those issued in English in other Canadian provinces into French. Since then, a competitor program has replaced METEO System after an open governmental bid. The system was developed by John Chandioux and was often mentioned as one of the few success stories in the field of machine translation. == History == The METEO System was in operational use at Environment Canada from 1982 to 2001. It stems from a prototype developed in 1975–76 by the TAUM Group, known as TAUM-METEO. The initial motivation to develop that prototype was that a junior translator came to TAUM to ask for help in translating weather bulletins at Environment Canada. Since all official communications emanating from the Canadian government must be available in French and English, because of the Official Languages Act of 1969, and weather bulletins represent a large amount of translation in real time, junior translators had to spend several months producing first draft translations, which were then revised by seniors. That was a difficult and tedious job, because of the specificities of the English and French sublanguages used, and not very rewarding, as the lifetime of a bulletin is only 4 hours. TAUM proposed to build a prototype MT system, and Environment Canada agreed to fund the project. A prototype was ready after a few months, with basic integration in the workflow of translation (source and target bulletins travelled over telex lines at the time and MT happened on a mainframe computer). The first version of the system (METEO 1) went into operation on a Control Data CDC 7600 supercomputer in March 1977. Chandioux then left the TAUM group to manage its operation and improve it, while the TAUM group embarked on a different project (TAUM-aviation, 1977–81). Benoit Thouin made improvements to the initial prototype over the subsequent year, and turned it into an operational system. After three years, METEO 1 had demonstrated the feasibility of microcomputer-based machine translation to the satisfaction of the Canadian government's Translation Bureau of Public Works and Government Services Canada. METEO 1 was formally adopted in 1981, replacing the junior translators in the workflow. Because of the need for high-quality translation, the revision step, done by senior translators, was maintained. The quality, measured as the percentage of edit operations (inserting or deleting a word counts as 1, replacing as 2) on the MT results, reached 85% in 1985. Until that time, the MT part was still implemented as a sequence of Q-systems. The Q-systems formalism is a rule-based SLLP (Specialized Language for Linguistic Programming) invented by Alain Colmerauer in 1967 as he was a postdoc coopérant at the TAUM group. He later invented the Prolog language in 1972 after returning to France and becoming a university professor in Marseille-Luminy. As the engine of the Q-systems is highly non-deterministic, and the manipulated data structures are in some ways too simple, without any types such as string or number, Chandioux encountered limitations in his efforts to raise translation quality and lower computation time to the point he could run it on microcomputers. In 1981, Chandioux created a new SLLP, or metalanguage for linguistic applications, based on the same basic algorithmic ideas as the Q-systems, but more deterministic, and offering typed labels on tree nodes. Following the advice of Bernard Vauquois and Colmerauer, he created GramR, and developed it for microcomputers. In 1982, he could start developing in GramR a new system for translating the weather bulletins on a high-end Cromemco microcomputer. METEO 2 went into operation in 1983. The software then ran in 48Kb of central memory with a 5Mb hard disk for paging. METEO 2 was the first MT application to run on a microcomputer. In 1985, the system had nothing left of the initial prototype, and was officially renamed METEO. It translated about 20 million words per year from English into French, and 10 million words from French into English, with a quality of 97%. Typically, it took 4 minutes for a bulletin in English to be sent from Winnipeg and come back in French after MT and human revision. In 1996, Chandioux developed a special version of his system (METEO 96) which was used to translate the weather forecasts (different kinds of bulletins) issued by the US National Weather Service during the 1996 Summer Olympics in Atlanta. The last known version of the system, METEO 5, dates from 1997 and ran on an IBM PC network under Windows NT. It translated 10 pages per second, but was able to fit into a 1.44Mb floppy disk.
Read more →
Naked Objects for .NET

Naked Objects for .NET or Naked Objects MVC is a software framework that builds upon the ASP.NET MVC framework. As the name suggests, the framework synthesizes two architectural patterns: naked objects and model–view–controller (MVC). These two patterns have been considered as antithetical. However, Trygve Reenskaug (the inventor of the MVC pattern) has made it clear that he does not see it that way, in his foreword to Richard Pawson's PhD thesis on the Naked Objects pattern. The Naked Objects MVC framework will take a domain model (written as Plain Old CLR Objects) and render it as a complete HTML application without the need for writing any user interface code - by means of a small set of generic View and Controller classes. The framework uses reflection rather than code generation. The developer may then choose to create customised Views and/or Controllers, using standard ASP.NET MVC patterns, for use where the generic user interface is not suitable.
Read more →
HOCR

hOCR is an open standard of data representation for formatted text obtained from optical character recognition (OCR). The definition encodes text, style, layout information, recognition confidence metrics and other information using Extensible Markup Language (XML) in the form of Hypertext Markup Language (HTML) or XHTML. == Software == The following OCR software can output the recognition result as hOCR file: OCRopus Tesseract Cuneiform ghostscript HebOCR gcv2hocr gImageReader == Example == The following example is an extract of an hOCR file: The recognized text is stored in normal text nodes of the HTML file. The distribution into separate lines and words is here given by the surrounding span tags. Moreover, the usual HTML entities are used, for example the p tag for a paragraph. Additional information is given in the properties such as: different layout elements such as "ocr_par", "ocr_line", "ocrx_word" geometric information for each element with a bounding box "bbox" language information "lang" some confidence values "x_wconf" == bbox == === General === The Layout of the Bounding Box Object or bbox Object is Grammar. property-name = "bbox" property-value = uint uint uint uint ==== Example ==== bbox 0 0 100 200 The bbox - short for "bounding box" - of an element is a rectangular box around this element, which is defined by the upper-left corner (x0, y0) and the lower-right corner (x1, y1). the values are with reference to the top-left corner of the document image and measured in pixels the order of the values are x0 y0 x1 y1 = "left top right bottom" ===== Usage ===== Use x_bboxes below for character bounding boxes. Do not use bbox unless the bounding box of the layout component is, in fact, rectangular, some non-rectangular layout components may have rectangular bounding boxes if the non-rectangularity is caused by floating elements around which text flows. The bounding box bbox of this line is shown in blue and it is span by the upper-left corner (10, 20) and the lower-right corner (160, 30). All coordinates are measured with reference to the top-left corner of the document image which border is drawn in black. == Searchable PDF files == The hOCR format is most commonly used in order to make searchable PDF files or as an extracted metadata of the PDF file. In order to create searchable PDF files we can use a scanned document image and a .hocr file of the particular image. We can use the following open source tools in order to achieve that. === hocr-tools === Source: hocr-tools is an open source library written in Python. It has a command-line utility attached in the scripts called hocr-pdf that enables us to convert standard hocr files to a searchable PDF file. It is also worth noting that the version for dealing with hocr files in RTL or non-Latin scripts like Arabic, we need to use the GitHub repository at the moment. hocr-pdf We can use the hocr-pdf utility using the following basic syntax. hocr-pdf—savefile final.pdf folder_images_and_hocr The folder_images_and_hocr must contain the respective .jpg and .hocr format files with their file extensions changed. ==== Known issues ==== Some of the known issues of hocr-pdf script in PyPI installation are the following. Not up to date with GitHub repository. hocr-pdf is broken on line 134 due to decodebytes() depreciated after Python 3.1 ==== Known fixes ==== Compile hocr-tools using latest GitHub repository. === hocr2pdf === hocr2pdf is another library that supports the conversion of hocr files. It is written in C++ and is cross-compatible with other libraries. It also has support for UTF-8 languages but that may require some additional debugging and browsing through some google conversation records to achieve that. According to Ubuntu Manpages,ExactImage is a fast C++ image processing library. Unlike many other library frameworks it allows operation in several color spaces and bit depths natively, resulting in low memory and computational requirements. hocr2pdf creates well layouted, searchable PDF files from hOCR (annotated HTML) input obtained from an OCR system. == hOCR to PDF attempts == In addition to the following discussed and stable libraries there have been many contributions to the hOCR format over the years with support from many of the early adopters of this format. You can get access to inlaying text on an Image with hOCR and converting that in a PDF file using Python 2 with this 12-year-old script as of 2021. This script can also be updated and made functional by converting that Python 2 Source code to Python 3 Supported Context. - HOCRConverter by jbrinley (Documentation) === HOCRConverter === The HOCRConverter is a script written in Python 2.x that can used in order to convert a hOCR file with a specified image file in order to convert it to a searchable PDF file. You can see the documentation using the link above. ==== Known issues ==== Has not been tested. Does not natively support Python 3.x
Read more →
The Best Free AI Virtual Assistant for Beginners

Comparing the best AI virtual assistant? An AI virtual assistant is software that uses machine learning to help you get more done — it lowers the barrier so anyone can produce professional output. Privacy matters too: check whether your data trains the model and whether a no-log or enterprise tier is available. Whether you are a beginner or a pro, the right AI virtual assistant slots into your workflow and pays for itself fast. We tested the leading options and ranked them by quality, value, and ease of use.
Read more →
Ancient text corpora

Ancient text corpora are the entire collection of texts from the period of ancient history, defined in this article as the period from the beginning of writing up to 300 AD. These corpora are important for the study of literature, history, linguistics, and other fields, and are a fundamental component of the world's cultural heritage. Chinese, Latin, and Greek are examples of ancient languages with significant text corpora, although much of these corpora are known to us via transmission (frequently via medieval manuscript copies) rather than in their original form. These texts – both transmitted and original – provide valuable insights into the history and culture of different regions of the world, and have been studied for centuries by scholars and researchers. Other ancient texts – particularly stone inscriptions and papyrus scrolls – have been published following archaeological research, notably the cuneiform corpus of c.10 million words and the c.5 million words in ancient Egyptian. Through advances in technology and digitization, ancient text corpora are more accessible than ever before. Tools such as the Perseus Digital Library and the Digital Corpus of Sanskrit have made it easier for researchers to access and analyze these texts. == Quantifying the corpora == Two types of ancient texts are known to modern scholars – those that have only survived in younger manuscripts, but whose great age is undisputed (this applies to the bulk of the Chinese, Brahmi, Greek, Latin, Hebrew and Avestan tradition), and those known from original inscriptions, papyri and other manuscripts. Counting of the words in each corpus presents significant methodological challenges – in principle, every single occurrence of a word in the text is counted separately, but in the case of parallel transmission of literary texts, only a single transmission is taken into account. Just as the Book of the Dead and the coffin texts are only included once in the number given for the Egyptian, the Greek and Latin literary works should only be counted according to one manuscript. If, on the other hand, tombs, royal inscriptions or economic documents of certain ancient languages often show a more or less identical form, this is not evaluated as a purely "parallel tradition". Attached prepositions are counted as separate words, except in the case of the definite article in Hebrew, Aramaic and Greek since it has no equivalent in most languages, so its frequency would significantly affect the comparability of numbers. === Languages with known size estimates === === South Asian === Sanskrit (Vedic Sanskrit and Classical Sanskrit) Indus script (3,800 items, c.20,000 characters) Brahmi script Old Tamil Early Indian epigraphy and Indian epic poetry Kharosthi Pali literature List of historic Indian texts === Mesoamerican === Olmec hieroglyphs Maya script === East Asian === Old Chinese Chinese classics The pre-Qin corpus: a collection of ancient Chinese texts written before the Qin dynasty (221 BCE). The corpus includes texts from Confucianism, Taoism, Legalism, and other schools of thought. The pre-Han corpus: a collection of ancient Chinese texts written before the Han dynasty (202 BCE). The corpus includes texts from Confucianism, Taoism, Legalism, and other schools of thought. See the Chinese Text Project Chinese bronze inscriptions, Oracle bone script, Seal script, Clerical script === Central Iranian languages === Prior to 300 AD, the Central Iranian languages are mainly in the form of Sassanid stone inscriptions in the two closely related idioms Middle Persian (Pahlavi scripts and Inscriptional Parthian), there are 5000 for the corpus of Middle Persian (mostly 3rd, but also 4th/5th centuries) and for the corpus of Parthian (3rd century) 3000 words. To what extent some of the Manichaean Middle Persian literary texts may date back to the 3rd century is difficult to estimate; Mani is said to have personally written the Shabuhragan totaling about 5000 words. In any case, if we combine Middle Persian and Parthian, we come to over 10,000 words. === Proto-Sinaitic === Proto-Sinaitic script has no more than about 400 letters (number of words is unknown since the script has not been fully interpreted). To a similar extent, there are probably approximately contemporaneous Proto-Canaanite inscriptions (ibid.). === Anatolian === Luwian cuneiform, approx. 3000 words the Palaic language few hundred words. Hieroglyphic Luwian the Lycian alphabet (the best attested Anatolian successor language written in alphabetic script) with about 5000 words The Lydian alphabet 109 inscriptions comprising about 1500 words The Phrygian alphabet the in-tomb inscriptions from the 2nd and 3rd centuries AD (approx. 1000 words) and in the so-called "old Phrygian" inscriptions less than 300 words The Carian alphabets whose texts, mainly from Egypt, contain around 600 words. === Old Italic === the Umbrian language attested essentially by the sacrificial instructions of the Iguvinian Tables with 5000 words the Oscan language (ibid.) with 2000 words the Messapic language with probably a good 1000 words (the estimate is difficult because most texts in this hardly understandable language do not use word separators) the Venetic language a few hundred words the Faliscan language a few hundred words Cisalpine Celtic inscriptions amount to approximately 2000 words, to which are added a number of glosses by classical authors === Iberia === Iberian scripts, more rarely written in Greek or Latin script, approx. 2500 words Celtiberian script, which refers to Celtic language testimonies in Iberian, but also in Latin script from Spain (approx. 1000 words) Southwest Paleohispanic script, 78 inscriptions, a few hundred words Lusitanian language, three monuments in Latin script, approx. 60 words === Germanic Northern Europe === Runic inscriptions dated before the 4th century amount to about 30 pieces, which contain no more than 50 words in total === Africa === Geʽez script: comparatively few inscriptions with a total of around 1,000 words before 300 AD. Following Christianization in the 4th century, more extensive texts are known. Libyco-Berber alphabet: over 1,000 inscriptions from the Maghreb, which are dated to Roman times. Most texts do not use a word separator; Peust estimates that the total number of words could be around 5,000 Meroitic script (Ancient Nubian): about 900 texts are known, which Peust estimates may contain approximately 10,000 words, albeit with uncertainty from the fact that the word separator is not used consistently in the Meroitic script. === Aegean === The Cretan Linear A inscriptions that have not yet been deciphered are available in about 2500 texts, which contain a total of around 20,000 characters. The total number of words can hardly be determined; Peust tentatively put it in the same order of magnitude as in Meroitic. In addition to the Linear A texts, there are also inscriptions Cretan hieroglyphs of a few hundred characters and texts written in the Greek alphabet, but not in Greek, with a few dozen words Cypriot syllabary in the first millennium BC, in which mostly Greek texts were recorded. The relevant texts comprise around 100 to 200 words. === Micro corpora === There are a significant number of ancient micro-corpus languages. Estimating the total number of attested ancient languages may be as difficult as estimating their corpus size. For example, Greek and Latin sources hand down an enormous amount of foreign-language glosses, the seriousness of which is not always certain. == Preservation and curation == Historic preservation and maintaining ancient text corpora presents several challenges, including issues with preservation, translation, and digitization. Many ancient texts have been lost over time, and those that survive may be damaged or fragmented. Translating ancient languages and scripts requires specialized expertise, and digitizing texts can be time-consuming and resource-intensive. == Corpus linguistics == The field of corpus linguistics studies language as expressed in text corpora. This includes the analysis of word frequency, collocations, grammar, and semantics. Ancient text corpora provide a valuable resource for corpus linguistics research, enabling scholars to explore the evolution of language and culture over time.
Read more →
Generative design

Generative design is an iterative design process that uses software to generate outputs that fulfill a set of constraints iteratively adjusted by a designer. Whether a human, test program, or artificial intelligence, the designer algorithmically or manually refines the feasible region of the program's inputs and outputs with each iteration to fulfill evolving design requirements. By employing computing power to evaluate more design permutations than a human alone is capable of, the process is capable of producing an optimal design that mimics nature's evolutionary approach to design through genetic variation and selection. The output can be images, sounds, architectural models, animation, and much more. It is, therefore, a fast method of exploring design possibilities that is used in various design fields such as art, architecture, communication design, and product design. Generative design has become more important, largely due to new programming environments or scripting capabilities that have made it relatively easy, even for designers with little programming experience, to implement their ideas. Additionally, this process can create solutions to substantially complex problems that would otherwise be resource-exhaustive with an alternative approach, making it a more attractive option for problems with a large or unknown solution set. It is also facilitated with tools in commercially available CAD packages. Not only are implementation tools more accessible, but also tools leveraging generative design as a foundation. Recent advancements have led to the development of Deep Generative Design, a framework that integrates topology optimization with deep learning models, such as Generative Adversarial Networks (GANs). Unlike traditional evolutionary methods that primarily focus on engineering performance, this approach uses deep generative models to enhance aesthetic diversity and novelty while simultaneously satisfying engineering constraints. For instance, research by Oh et al. (2019) proposed a framework using Boundary Equilibrium GANs (BEGAN) to generate diverse design options which are then refined through density-based topology optimization, allowing for the exploration of complex design spaces that balance structural integrity with visual variation. In practice, generative design does not solely aim to produce a single optimal solution, but involves iteratively refining the design problem by modifying parameters, constraints, and evaluation criteria within a computational model, resulting in multiple design alternatives from which the designer selects. == Use in architecture == Generative design in architecture is an iterative design process that enables architects to explore a wider solution space with more possibility and creativity. Architectural design has long been regarded as a wicked problem. Compared with traditional top-down design approach, generative design can address design problems efficiently, by using a bottom-up paradigm that uses parametric-defined rules to generate complex solutions. The solution itself then evolves to a good, if not optimal, solution. The advantage of using generative design as a design tool is that it does not construct fixed geometries, but take a set of design rules that can generate an infinite set of possible design solutions. The generated design solutions can be more sensitive, responsive, and adaptive to the problem. Generative design involves rule definition and result analysis that are integrated with the design process. By defining parameters and rules, the generative approach is able to provide optimized solution for both structural stability and aesthetics. Possible design algorithms include cellular automata, shape grammar, genetic algorithm, space syntax, and most recently, artificial neural network. Due to the high complexity of the solution generated, rule-based computational tools, such as finite element method and topology optimisation, are preferred to evaluate and optimise the generated solution. The iterative process provided by computer software enables the trial-and-error approach in design, and involves architects interfering with the optimisation process. Historically precedent work includes Antoni Gaudí's Sagrada Família, which used rule based geometrical forms for structures, and Buckminster Fuller's Montreal Biosphere where the rules were designed to generate individual components, rather than the final product. More recent generative-design cases include Foster and Partners' Queen Elizabeth II Great Court, where the tessellated glass roof was designed using a geometric schema to define hierarchical relationships, and then the generated solution was optimized based on geometrical and structural requirements. == Use in sustainable design == Generative design in sustainable design is an effective approach addressing energy efficiency and climate change at the early design stage, recognizing buildings contribute to approximately one-third of global greenhouse gas emissions and 30%-40% of total building energy use. It integrates environmental principles with algorithms, enabling exploration of countless design alternatives to enhance energy performance, reduce carbon footprints, and minimize waste. A key feature of generative design in sustainable design is its ability to incorporate Building Performance Simulations (BPS) into the design process. Simulation programs such as EnergyPlus, Ladybug Tools,, and so on, combined with generative algorithms, can optimize design solutions for cost-effective energy use and zero-carbon building designs. For example, the GENE_ARCH system used a Pareto algorithm with building energy simulation for the whole building design optimization. Generative design has improved sustainable facade design, as illustrated by the algorithm of cellular automata and daylight simulations in adaptive facade design. In addition, genetic algorithms were used with radiation simulations for energy-efficient photo-voltaic (PV) modules on high-rise building facades. Generative design is also applied to life cycle analysis (LCA), as demonstrated by a framework using grid search algorithms to optimize exterior wall design for minimum environmental impact. Multi-objective optimization embraces multiple diverse sustainability goals, such as interactive kinetic louvers using biomimicry and daylight simulations to enhance daylight, visual comfort, and energy efficiency. The study of PV and shading systems can maximize on-site electricity, improve visual quality, and daylight performance. Artificial intelligence (AI) and machine learning (ML) further improve computation efficiency in complex climate-responsive sustainable design. One study employed reinforcement learning to identify the relationship between design parameters and energy use for a sustainable campus, while other studies tried hybrid algorithms, such as using the genetic algorithm and GANs to balance daylight illumination and thermal comfort under different roof conditions. Other popular AI tools were also integrated, including deep reinforcement learning (DRL) and computer vision (CV), to generate an urban block according to direct sunlight hours and solar heat gains. These AI-driven generative design methods enable faster simulations and design decision making, resulting in designs that are environmentally responsible. == Use in additive manufacturing == Additive manufacturing (AM) is a process that creates physical models directly from three-dimensional (3D) data by joining materials layer by layer. It is used in industries to produce a variety of end-use parts, which are final components designed for direct application in products or systems. AM provides design flexibility and enables material reduction in lightweight applications, such as aerospace, automotive, medical, and portable electronic devices, where minimizing weight is critical for performance. Generative design, one of the four key methods for lightweight design in AM, is commonly applied to optimize structures for specific performance requirements. Generative design can help create optimized solutions that balance multiple objectives, such as enhancing performance while minimizing cost. In design for additive manufacturing (DfAM), multi-objective topology optimization is used to generate a set of candidate solutions. Designers then assess these options using their expertise and key performance indicators (KPIs) to select the best option for implementation. However, integrating AM constraints (e.g., speed of build, materials, build envelope, and accuracy) into generative design remains challenging, as ensuring all solutions are valid is complex. Balancing multiple design objectives while limiting computational costs adds further challenges for designers. To overcome these difficulties, researchers proposed a generative design method with manufacturing validation to improve decision-making efficiency. This method starts with a cons
Read more →
Optical Character Recognition (Unicode block)

Optical Character Recognition is a Unicode block containing signal characters for OCR and MICR standards. == Block == == Subheadings == The Optical Character Recognition block has three informal subheadings (groupings) within its character collection: OCR-A, MICR, and OCR. === OCR-A === The OCR-A subheading contains six characters taken from the OCR-A font described in the ISO 1073-1:1976 standard: U+2440 ⑀ OCR HOOK, U+2441 ⑁ OCR CHAIR, U+2442 ⑂ OCR FORK, U+2443 ⑃ OCR INVERTED FORK, U+2444 ⑄ OCR BELT BUCKLE, and U+2445 ⑅ OCR BOW TIE. The OCR bow tie is given the informative alias "unique asterisk". The hook, chair and fork, in addition to a long vertical bar, are included in the most basic "numeric" implementation level of OCR-A, which includes digits but excludes letters and conventional punctuation. By contrast, the most basic implementation level of OCR-B instead includes the digits, plus sign, less-than sign, greater-than sign, long vertical bar and seven of the capital letters; as such, there are no characters specific to OCR-B in the Optical Character Recognition block. === MICR === The MICR subheading contains four punctuation characters for bank cheque identifiers, taken from the magnetic ink character recognition E-13B font (codified in the ISO 1004:1995 standard): U+2446 ⑆ OCR BRANCH BANK IDENTIFICATION, U+2447 ⑇ OCR AMOUNT OF CHECK, U+2448 ⑈ OCR DASH, and U+2449 ⑉ OCR CUSTOMER ACCOUNT NUMBER. The latter two characters are misnamed: their names were inadvertently switched when they were named in the 1993 (first) edition of ISO/IEC 10646, a mistake which had been present since Unicode 1.0.0. Although their formal names remain unchanged due to the Unicode stability policy, they both have corrected normative aliases: U+2448 ⑈ is MICR ON US SYMBOL, and U+2449 ⑉ is MICR DASH SYMBOL (the standard notes that "the Unicode character names include several misnomers"). These symbols had previously been encoded by the ISO-IR-98 encoding defined by ISO 2033:1983, in which they were simply named SYMBOL ONE through SYMBOL FOUR. All four characters have informative aliases in the Unicode charts: "transit", "amount", "on us", and "dash" respectively. === OCR === The OCR subheading consists of a single character: U+244A ⑊ OCR DOUBLE BACKSLASH. == History == The following Unicode-related documents record the purpose and process of defining specific characters in the Optical Character Recognition block:
Read more →
Karsten Borgwardt

Karsten Borgwardt (born 1980) is a German computer scientist and biologist specializing in machine learning and computational biology. Since February 2023, he has been a director at the Max Planck Institute of Biochemistry in Martinsried, Germany, where he leads the Department of Machine Learning and Systems Biology. == Education and career == Borgwardt was born in Kaiserslautern. He obtained a Diplom (equivalent to a master’s degree) in computer science from LMU Munich in 2004 and a Master of Science in biology from the University of Oxford in 2003. In 2007, he obtained his PhD from LMU Munich in computer science. Following a postdoctoral position at the University of Cambridge, he became a research group leader for machine learning and computational biology at the Max Planck Institute for Biological Cybernetics and the former Max Planck Institute for Developmental Biology in Tübingen in 2008. In 2011, Borgwardt was appointed professor of data mining in the life sciences at the University of Tübingen. In 2014, he joined ETH Zurich as an associate professor in the Department of Biosystems Science and Engineering (D-BSSE) and was promoted to full professor in 2017. During his tenure at ETH Zurich, he coordinated significant research programs, including two Marie Curie Innovative Training Networks and the Personalized Swiss Sepsis Study, focusing on the prediction of sepsis using machine learning. In 2023, he was appointed as Scientific Member of the Max Planck Society and as Director at the Max Planck Institute of Biochemistry in Martinsried. == Research contributions == Borgwardt’s research integrates big data analysis with biomedical research. He develops novel machine learning algorithms to detect patterns and statistical dependencies in large biological and medical datasets. His work aims to enable the automatic generation of new knowledge from big data and to understand the relationship between the function of biological systems and their molecular properties, which is fundamental for personalized medicine. == Awards and honors == During his studies, he was a scholar of the Stiftung Maximilianeum, and the Bavarian Foundation for the Promotion of the Gifted. Borgwardt received scholarships from the Studienstiftung des deutschen Volkes in 2002 and 2007. His PhD dissertation received the Heinz Schwärtzel Dissertation Award for Foundations of Computer Science in 2007. As a professor in Tübingen, he was awarded the Alfried-Krupp-Förderpreis for Young Professors in 2013. In 2015, he received an SNSF Starting Grant. In 2014, 2015 and 2016, he was listed in “Top 40 under 40” in Germany rankings selected by Capital magazine. In 2018, Borgwardt was named among “25 individuals who have the potential to shape the next 25 years” by Focus magazine. In 2023, Borgwardt received an honorary professorship from LMU Munich by the Faculty of Chemistry and Pharmacy. Publications from Borgwardt's group have received the Outstanding Student Paper Award in NIPS in 2009, the SIB Graduate Paper Award in 2020 and SIB Remarkable Output Awards in 2020 and 2021 from the Swiss Institute of Bioinformatics (SIB). == Selected publications == Weisfeiler-Lehman Graph Kernels (’‘Journal of Machine Learning Research’’, 2011): Introduced an efficient graph kernel based on the Weisfeiler-Lehman algorithm. “Direct antimicrobial resistance prediction from clinical MALDI-TOF mass spectra using machine learning” (’‘Nature Medicine’’, 2022): showcased the feasibility of predicting antimicrobial resistance from readily collected mass spectrometry data in the hospital. The new method is able to identify antibiotic resistance 24 hours earlier than previous methods.
Read more →
AI Subtitle Generators Reviews: What Actually Works in 2026

Trying to pick the best AI subtitle generator? An AI subtitle generator is software that uses machine learning to help you get more done — it scales effortlessly from a single task to thousands. The best picks balance beginner-friendly simplicity with the depth power users need, and they ship updates often. Whether you are a beginner or a pro, the right AI subtitle generator slots into your workflow and pays for itself fast. Read on for hands-on impressions, pricing tiers, and the standout features that matter.
Read more →
Supervisor Mode Access Prevention

Supervisor Mode Access Prevention (SMAP) is a feature of some CPU implementations such as the Intel Broadwell microarchitecture that allows supervisor mode programs to optionally set user-space memory mappings so that access to those mappings from supervisor mode will cause a trap. This makes it harder for malicious programs to "trick" the kernel into using instructions or data from a user-space program. == History == Supervisor Mode Access Prevention is designed to complement Supervisor Mode Execution Prevention (SMEP), which was introduced earlier. SMEP can be used to prevent supervisor mode from unintentionally executing user-space code. SMAP extends this protection to reads and writes. == Benefits == Without Supervisor Mode Access Prevention, supervisor code usually has full read and write access to user-space memory mappings (or has the ability to obtain full access). This has led to the development of several security exploits, including privilege escalation exploits, which operate by causing the kernel to access user-space memory when it did not intend to. Operating systems can block these exploits by using SMAP to force unintended user-space memory accesses to trigger page faults. Additionally, SMAP can expose flawed kernel code which does not follow the intended procedures for accessing user-space memory. However, the use of SMAP in an operating system may lead to a larger kernel size and slower user-space memory accesses from supervisor code, because SMAP must be temporarily disabled any time supervisor code intends to access user-space memory. == Technical details == Processors indicate support for Supervisor Mode Access Prevention through the Extended Features CPUID leaf. SMAP is enabled when memory paging is active and the SMAP bit in the CR4 control register is set. SMAP can be temporarily disabled for explicit memory accesses by setting the EFLAGS.AC (Alignment Check) flag. The stac (Set AC Flag) and clac (Clear AC Flag) instructions can be used to easily set or clear the flag. When the SMAP bit in CR4 is set, explicit memory reads and writes to user-mode pages performed by code running with a privilege level less than 3 will always result in a page fault if the EFLAGS.AC flag is not set. Implicit reads and writes (such as those made to descriptor tables) to user-mode pages will always trigger a page fault if SMAP is enabled, regardless of the value of EFLAGS.AC. == Operating system support == Linux kernel support for Supervisor Mode Access Prevention was implemented by H. Peter Anvin. It was merged into the mainline Linux 3.7 kernel (released December 2012) and it is enabled by default for processors which support the feature. FreeBSD has supported Supervisor Mode Execution Prevention since 2012 and Supervisor Mode Access Prevention since 2018. OpenBSD has supported Supervisor Mode Access Prevention and the related Supervisor Mode Execution Prevention since 2012, with OpenBSD 5.3 being the first release with support for the feature enabled. NetBSD support for Supervisor Mode Execution Prevention (SMEP) was implemented by Maxime Villard in December 2015. Support for Supervisor Mode Access Prevention (SMAP) was also implemented by Maxime Villard, in August 2017. NetBSD 8.0 was the first release with both features supported and enabled. Haiku support for Supervisor Mode Execution Prevention (SMEP) was implemented by Jérôme Duval in January 2018. macOS has support for SMAP at least since macOS 10.13 released 2017.
Read more →
Forrest N. Iandola

Forrest N. Iandola is an American computer scientist specializing in efficient AI. == Career == Iandola earned a PhD in Electrical Engineering and Computer Science from UC Berkeley in 2016, advised by Kurt Keutzer. As part of his dissertation, he co-authored SqueezeNet, a deep neural network for image classification optimized for smartphones and other mobile devices. Iandola and Keutzer went on to co-found DeepScale. The firm squeezes deep neural networks onto low-cost automotive-grade processors for use in driver assistance systems. Tesla acquired DeepScale in 2019. In 2020, he co-authored SqueezeBERT, an efficient neural network for natural language processing. In 2022, he joined Meta as an AI research scientist. His research at Meta includes developing efficient AI models, such as EfficientSAM and MobileLLM.
Read more →
The Best Free AI Photo Editor for Beginners

Comparing the best AI photo editor? An AI photo editor is software that uses machine learning to help you get more done — it lowers the barrier so anyone can produce professional output. Privacy matters too: check whether your data trains the model and whether a no-log or enterprise tier is available. Whether you are a beginner or a pro, the right AI photo editor slots into your workflow and pays for itself fast. We tested the leading options and ranked them by quality, value, and ease of use.
Read more →